HUAWEI-ADSL-EXT-MIB

File: HUAWEI-ADSL-EXT-MIB.mib (408318 bytes)

Imported modules

ADSL-LINE-MIB	IF-MIB	RFC1213-MIB
HUAWEI-DEVICE-MIB	HWMUSA-DEV-MIB	SNMPv2-SMI
ADSL2-LINE-TC-MIB	ADSL-LINE-EXT-MIB	PerfHist-TC-MIB
HC-PerfHist-TC-MIB	SNMPv2-MIB	SNMPv2-TC
HUAWEI-TC-MIB	HUAWEI-MIB	HUAWEI-ADSL-MIB
HUAWEI-BTEST-MIB

Imported symbols

adslLineMib	adslLineConfProfileEntry	adslLineConfProfileName
adslLineEntry	adslAturChanEntry	adslAtucChanEntry
adslAtucChanPerfDataEntry	adslAturChanPerfDataEntry	adslAtucChanIntervalEntry
adslAturChanIntervalEntry	adslTraps	adslAturPhysEntry
adslAtucPhysEntry	adslAtucPerfDataEntry	adslAtucIntervalEntry
adslLineAlarmConfProfileEntry	adslAturChanIntervalNumber	adslLineAlarmConfProfileName
adslAtucIntervalNumber	adslAturIntervalNumber	adslAtucChanIntervalNumber
adslAtucConfRateMode	adslAtucConfTargetSnrMgn	adslAtucConfMaxSnrMgn
adslAtucConfMinSnrMgn	adslAtucConfDownshiftSnrMgn	adslAtucConfUpshiftSnrMgn
adslAtucConfMinUpshiftTime	adslAtucConfMinDownshiftTime	adslAtucChanConfFastMinTxRate
adslAtucChanConfInterleaveMinTxRate	adslAtucChanConfFastMaxTxRate	adslAtucChanConfInterleaveMaxTxRate
adslAtucChanConfMaxInterleaveDelay	adslAturConfRateMode	adslAturConfRateChanRatio
adslAturConfTargetSnrMgn	adslAturConfMaxSnrMgn	adslAturConfMinSnrMgn
adslAturConfDownshiftSnrMgn	adslAturConfUpshiftSnrMgn	adslAturConfMinUpshiftTime
adslAturConfMinDownshiftTime	adslAturChanConfFastMinTxRate	adslAturChanConfInterleaveMinTxRate
adslAturChanConfFastMaxTxRate	adslAturChanConfInterleaveMaxTxRate	adslAturChanConfMaxInterleaveDelay
adslLineConfProfileRowStatus	adslAtucThresh15MinLofs	adslAtucThresh15MinLoss
adslAtucThresh15MinLols	adslAtucThresh15MinLprs	adslAtucThresh15MinESs
adslAtucThreshFastRateUp	adslAtucThreshInterleaveRateUp	adslAtucThreshFastRateDown
adslAtucThreshInterleaveRateDown	adslAtucInitFailureTrapEnable	adslAturThresh15MinLofs
adslAturThresh15MinLoss	adslAturThresh15MinLprs	adslAturThresh15MinESs
adslAturThreshFastRateUp	adslAturThreshInterleaveRateUp	adslAturThreshFastRateDown
adslAturThreshInterleaveRateDown	adslLineAlarmConfProfileRowStatus	ifIndex
ifType	hwFrameIndex	hwSlotIndex
hwSubslotIndex	hwPortIndex	hwPortOperStatus
hwPortPrimaryStatus	hwPortSecondaryStatus	hwConfigChangeIP
hwIasConfigChangeTrapID	Integer32	Unsigned32
Gauge32	Counter32	OBJECT-TYPE
NOTIFICATION-TYPE	MODULE-IDENTITY	Adsl2TransmissionModeType
Adsl2PsdMaskDs	Adsl2PsdMaskUs	Adsl2SymbolProtection
adslLineExtEntry	adslConfProfileLineType	adslAtucThreshold15MinFailedFastR
adslAtucThreshold15MinSesL	adslAtucThreshold15MinUasL	adslAturThreshold15MinSesL
adslAturThreshold15MinUasL	PerfIntervalCount	HCPerfIntervalThreshold
sysName	RowStatus	PhysAddress
TruthValue	DateAndTime	TEXTUAL-CONVENTION
hwAlarmId	hwAlarmTime	hwAlarmSn
hwCauseId	hwTrapType	huaweiUtility
HWADSLSYMBOLPROTECTION	HWADSLTRANSMISSIONMODETYPE	HWADSL2ANNEXMSCOPE
hwAdsllinePvcVpi	hwAdslLinePvcVci	hwAdslAtucConfDownBitSwap
hwAdslAtucConfUpBitSwap	hwAdslTrellionsModeEnable	hwBTSSAdslDeltTestOperResult

Defined Types

HwadslAturChanInfoEntry
SEQUENCE
	hwadslAturChanCurrINPInfo	Gauge32
	hwadslAturChanRsSymbolsInfo	Gauge32
	hwadslAturChanRsRedundancyInfo	Gauge32
	hwadslAturChanRsDepthInfo	Gauge32
	hwadslAturChanSymbolLengthInfo	Gauge32
	hwadslAturChanPhyRrrcBitsInfo	Gauge32
	hwadslAturChanPhyRtxQueueInfo	Gauge32
	hwadslAturChanRsSizeInfo	Gauge32
	hwadslAturChanCodeGainInfo	Gauge32
	hwadslAturChanL2NetDataRate	Gauge32

HwadslAturPhysInfoEntry
SEQUENCE
	hwadslAturTransmissionCapabilitiesInfo	Adsl2TransmissionModeType
	hwAdslAturCurrSignalAtnInfo	Gauge32
	hwadslAturInvG994VendorId	OCTET STRING
	hwadslAturLInvSelfTestResult	Unsigned32

HwadslAtucChanInfoEntry
SEQUENCE
	hwadslAtucChanCurrINPInfo	Gauge32
	hwadslAtucChanRsSymbolsInfo	Gauge32
	hwadslAtucChanRsRedundancyInfo	Gauge32
	hwadslAtucChanRsDepthInfo	Gauge32
	hwadslAtucChanSymbolLengthInfo	Gauge32
	hwadslAtucChanPhyRrrcBitsInfo	Gauge32
	hwadslAtucChanPhyRtxQueueInfo	Gauge32
	hwadslAtucChanRsSizeInfo	Gauge32
	hwadslAtucChanCodeGainInfo	Gauge32
	hwadslAtucChanPcbInfo	Gauge32
	hwadslAtucChanActNetDataRate	Gauge32
	hwadslAtucChanActINPAgainstREIN	Gauge32
	hwadslAtucChanL2NetDataRate	Gauge32

HwadslLineConfProfileCfgEntry
SEQUENCE
	hwAdslAtucConfDownBitSwapCfg	INTEGER
	hwAdslAtucConfUpBitSwapCfg	INTEGER
	hwAdslTrellionsModeEnableCfg	INTEGER
	hwAdslTransmissionModeCfg	INTEGER

HwAdslLinePvcCfgEntry
SEQUENCE
	hwAdslLinePvcVlanIdCfg	Integer32
	hwAdslLinePvcPriorityCfg	Integer32
	hwAdslLinePvcDsBandCfg	Integer32
	hwAdslLinePvcUsBandCfg	Integer32
	hwAdslLinePvcMCastEnableCfg	INTEGER
	hwAdslLinePvcIGMPEnableCfg	INTEGER
	hwAdslLinePvcIndexCfg	Integer32
	hwAdslLinePvcConnectTypeCfg	INTEGER
	hwAdslLinePvcRowStatusCfg	RowStatus

HwadslLineCfgEntry
SEQUENCE
	hwadslLineExtConfProfileCfg	OCTET STRING
	hwadslLineDynamicProfileCfg	OCTET STRING

HwAdslLineBitAllocationInfoEntry
SEQUENCE
	hwAdslLineDownStreamBitsPerFrameInfo	Integer32
	hwAdslLineUpStreamBitsPerFrameInfo	Integer32
	hwAdslLineDownStreamBitAllocLowInfo	OCTET STRING
	hwAdslLineDownStreamBitAllocHighInfo	OCTET STRING
	hwAdslLineUpStreamBitAllocInfo	OCTET STRING

HwXdslPortCfgEntry
SEQUENCE
	hwXdslPortMaxMacLearnCfg	Integer32
	hwXdslPortRateMonitorThresholdCfg	Integer32
	hwXdslPortUpThresholdTxRateCfg	Gauge32
	hwXdslPortDownThresholdTxRateCfg	Gauge32
	hwXdslPortRateMonitorAlarmEnableCfg	INTEGER
	hwXdslPortUpTimeCfg	Counter32
	hwXdslPortNTEPowerStatusCfg	INTEGER
	hwXdslPortCurrentUpRateCfg	Integer32
	hwXdslPortCurrentDownRateCfg	Integer32
	hwXdslPortFarEndRunStateCfg	INTEGER
	hwXdslPortPowerStateCfg	INTEGER
	hwXdslPortUpCntCfg	Unsigned32
	hwXdslPortUpCntAdminStatusCfg	INTEGER
	hwXdslPortLastUpTimeCfg	DateAndTime
	hwXdslPortLastDownTimeCfg	DateAndTime
	hwXdslPortClearUpCntTimeCfg	DateAndTime
	hwXdslPortRetrainCntCfg	Unsigned32
	hwXdslPortLastRetrainReasonCfg	Unsigned32
	hwXdslPortLoopFlagCfg	INTEGER
	hwXdslPortUpThresholdCfg	Integer32
	hwXdslPortDownThresholdCfg	Integer32

HwAdslLinePreActParaInfoEntry
SEQUENCE
	hwAdslAtucPrevSnrMgnInfo	Integer32
	hwAdslAturPrevSnrMgnInfo	Integer32
	hwAdslAtucPrevAttainableRateInfo	Unsigned32
	hwAdslAturPrevAttainableRateInfo	Unsigned32
	hwAdslAtucPreAtnInfo	Gauge32
	hwAdslAturPreAtnInfo	Gauge32
	hwAdslPreActiveTimeInfo	DateAndTime

HwPortThreePriorityCfgEntry
SEQUENCE
	hwPortThreePriorityEnableCfg	INTEGER

HwSlotMacMaxNoLimitCfgEntry
SEQUENCE
	hwSlotMacMaxNoLimitEnableCfg	INTEGER

HwXdslPortStateStatisticInfoEntry
SEQUENCE
	hwXdslPortStatePortNumberInfo	Unsigned32
	hwXdslPortStateBitmapListInfo	OCTET STRING
	hwXdslTotalOfActivatedPortsInfo	Unsigned32
	hwXdslTotalOfDeactivatedPortsInfo	Unsigned32
	hwXdslTotalOfActivatingPortsInfo	Unsigned32
	hwXdslTotalOfTestingPortsInfo	Unsigned32
	hwXdslTotalOfBlockedPortsInfo	Unsigned32
	hwXdslTotalOfLocalLoopbackPortsInfo	Unsigned32
	hwXdslTotalOfRemoteLoopbackPortsInfo	Unsigned32
	hwXdslTotalOfFailedPortsInfo	Unsigned32
	hwXdslTotalOfUnknownPortsInfo	Unsigned32

HwadslLineExtConfProfileCfgEntry
SEQUENCE
	hwadslLineExtConfProfileNameCfg	OCTET STRING
	hwadslLineDisableToneSection1BeginCfg	Integer32
	hwadslLineDisableToneSection1EndCfg	Integer32
	hwadslLineDisableToneSection1FlagCfg	INTEGER
	hwadslLineDisableToneSection2BeginCfg	Integer32
	hwadslLineDisableToneSection2EndCfg	Integer32
	hwadslLineDisableToneSection2FlagCfg	INTEGER
	hwadslLineDisableToneSection3BeginCfg	Integer32
	hwadslLineDisableToneSection3EndCfg	Integer32
	hwadslLineDisableToneSection3FlagCfg	INTEGER
	hwadslLineDisableToneSection4BeginCfg	Integer32
	hwadslLineDisableToneSection4EndCfg	Integer32
	hwadslLineDisableToneSection4FlagCfg	INTEGER
	hwadsl2ChConfProfMinProtectionDsCfg	HWADSLSYMBOLPROTECTION
	hwadsl2ChConfProfMinProtectionUsCfg	HWADSLSYMBOLPROTECTION
	hwAdslExtDsMinTrainSnrMgnCfg	Integer32
	hwAdslExtUsMinTrainSnrMgnCfg	Integer32
	hwAdslExtDsMaxPsdCfg	Integer32
	hwadsl2TSSiPsdMaskDsCfg	Adsl2PsdMaskDs
	hwadsl2TranMissionStardardMaskCfg	Unsigned32
	hwadsl2TransMissionAnnexMaskCfg	Unsigned32
	hwadsl2TransMissionAnnexMScopeCfg	HWADSL2ANNEXMSCOPE
	hwadsl2L2ModeStateCfg	INTEGER
	hwadsl2L2ModeMinDataRateCfg	Integer32
	hwadsl2L2ModeMaxDataRateCfg	Integer32
	hwadsl2L2ModePayloadRateThresholdCfg	Integer32
	hwadsl2L2ModeGuardTimeCfg	Integer32
	hwadsl2L2ModeIntervalTimeCfg	Integer32
	hwadsl2L2ModeIntervalPowerValueCfg	Integer32
	hwadsl2L2ModeTotalPowerValueCfg	Integer32
	hwadslExtUsPhyRcontrolCfg	INTEGER
	hwadslExtUsINPmaxCfg	Adsl2SymbolProtection
	hwadslExtUsMinRtxRatioCfg	Integer32
	hwadslExtUsMinRSoverheadCfg	Integer32
	hwadslExtDsPhyRcontrolCfg	INTEGER
	hwadslExtDsINPmaxCfg	Adsl2SymbolProtection
	hwadslExtDsMinRtxRatioCfg	Integer32
	hwadslExtDsMinRSoverheadCfg	Integer32
	hwadsl2TSSiPsdMaskUsCfg	Adsl2PsdMaskUs
	hwadslLConfProfAdslModeCfg	INTEGER
	hwadslLineExtConfProfileRowStatusCfg	RowStatus
	hwadsl2L2ModeL2TimeCfg	Integer32
	hwadslLineExtConfProfRtxModeDs	INTEGER
	hwadslLineExtConfProfLeftrThreshDs	Unsigned32
	hwadslLineExtConfProfMinEtrRtxDs	Unsigned32
	hwadslLineExtConfProfMaxEtrRtxDs	Unsigned32
	hwadslLineExtConfProfMaxNdrRtxDs	Unsigned32
	hwadslLineExtConfProfMaxDelayRtxDs	Unsigned32
	hwadslLineExtConfProfMinDelayRtxDs	Unsigned32
	hwadslLineExtConfProfMinInpShineRtxDs	Unsigned32
	hwadslLineExtConfProfShineRatioRtxDs	Unsigned32
	hwadslLineExtConfProfMinInpReinRtxDs	Unsigned32
	hwadslLineExtConfProfIatReinRtxDs	INTEGER
	hwadsl2LExtLineProfReferenceClock	INTEGER
	hwadsl2LExtLineProfRfiBands	OCTET STRING
	hwadsl2LExtLineProfDpboEPsd	OCTET STRING
	hwadsl2LExtLineProfDpboEsEL	Unsigned32
	hwadsl2LExtLineProfDpboEselMin	Unsigned32
	hwadsl2LExtLineProfDpboEsCableModelA	Unsigned32
	hwadsl2LExtLineProfDpboEsCableModelB	Unsigned32
	hwadsl2LExtLineProfDpboEsCableModelC	Unsigned32
	hwadsl2LExtLineProfDpboMus	Unsigned32
	hwadsl2LExtLineProfDpboFMin	Unsigned32
	hwadsl2LExtLineProfDpboFMax	Unsigned32
	hwadsl2LExtLineProfMaxNomPsdUs	Integer32
	hwadsl2LExtLineProfMaxNomAtpDs	Unsigned32
	hwadsl2LExtLineProfMaxNomAtpUs	Unsigned32
	hwadsl2LExtLineProfInmIatoDs	Unsigned32
	hwadsl2LExtLineProfInmIatsDs	Unsigned32
	hwadsl2LExtLineProfInmCcDs	Unsigned32
	hwadsl2LExtLineProfInmInpeqModeDs	Unsigned32
	hwadsl2LExtLineProfForceInpDs	TruthValue
	hwadsl2LExtLineProfForceInpUs	TruthValue
	hwadsl2LExtLineProfInitPolicy	INTEGER
	hwadsl2LExtLineProfL3Time	Unsigned32
	hwadsl2LExtLineProfL3ModeState	INTEGER

HwAdslLineLatestActParaInfoEntry
SEQUENCE
	hwAdslLineLatestActiveTimeInfo	DateAndTime
	hwAdslLineLatestDeactiveTimeInfo	DateAndTime
	hwAdslAtucLatestTxRateInfo	Gauge32
	hwAdslAturLatestTxRateInfo	Gauge32
	hwAdslAtucLatestSnrMgnInfo	Integer32
	hwAdslAturLatestSnrMgnInfo	Integer32
	hwAdslAtucLatestAtnInfo	Gauge32
	hwAdslAturLatestAtnInfo	Gauge32
	hwAdslAtucLatestAttainableRateInfo	Gauge32
	hwAdslAturLatestAttainableRateInfo	Gauge32
	hwAdslAtucLatestConfTxRateInfo	Gauge32
	hwAdslAturLatestConfTxRateInfo	Gauge32
	hwAdslAtucLatestInterleaveDelayInfo	Gauge32
	hwAdslAturLatestInterleaveDelayInfo	Gauge32
	hwAdslAtucLatestTargetSnrMgnInfo	Integer32
	hwAdslAturLatestTargetSnrMgnInfo	Integer32
	hwAdslAtucLatestTxRateThresholdInfo	Gauge32
	hwAdslAturLatestTxRateThresholdInfo	Gauge32

HwXdslPortPerformanceStatInfoEntry
SEQUENCE
	hwXdslPort15minutesPerformanceIntervalInfo	Integer32
	hwXdslPort15minutesPerformanceInBytesInfo	Counter32
	hwXdslPort15minutesPerformanceOutBytesInfo	Counter32
	hwXdslPortSyncSuccNumberInfo	Counter32
	hwXdslPortSyncFailNumberInfo	Counter32
	hwXdslPortAtucCodeViolationInfo	Counter32
	hwXdslPortAturCodeViolationInfo	Counter32
	hwXdslPortAtucFecSecondsInfo	Counter32
	hwXdslPortAturFecSecondsInfo	Counter32
	hwXdslPortCurrent15minutesStatTimeInfo	Counter32

HwadslAtucPhysInfoEntry
SEQUENCE
	hwAdslAtucCurrTransModeInfo	HWADSLTRANSMISSIONMODETYPE
	hwAdslAtucCurrSignalAtnInfo	Gauge32
	hwadslAtucInvG994VendorId	OCTET STRING
	hwadslAtucLInvSelfTestResult	Unsigned32
	hwadslAtucTransmissionCapabilitiesInfo	Adsl2TransmissionModeType

HwadslLineExtInfoEntry
SEQUENCE
	hwadsl2LineTransAtucActualInfo	Adsl2TransmissionModeType
	hwadslLineStatusRtxUsedDs	INTEGER
	hwadslLineStatusInitResult	INTEGER
	hwadslLineStatusSigAttenDs	Unsigned32
	hwadslLineStatusSigAttenUs	Unsigned32
	hwadslLineStatusActPsdDs	Integer32
	hwadslLineStatusActPsdUs	Integer32
	hwadslLineStatusLastRetrainInfo	INTEGER
	hwadslLineStatusLineRateDs	Unsigned32
	hwadslLineStatusLineRateUs	Unsigned32

HwadslAtucChanPerfDataInfoEntry
SEQUENCE
	hwadslAtucChanFecBlksInfo	Counter32
	hwadslAtucChanHecBlksInfo	Counter32
	hwadslAtucChanCrcBlksInfo	Counter32
	hwadslAtucChanPerfCurr15MinFecBlksInfo	Counter32
	hwadslAtucChanPerfCurr15MinHecBlksInfo	Counter32
	hwadslAtucChanPerfCurr15MinCrcBlksInfo	Counter32
	hwadslAtucChanPerfCurr1DayFecBlksInfo	Counter32
	hwadslAtucChanPerfCurr1DayHecBlksInfo	Counter32
	hwadslAtucChanPerfCurr1DayCrcBlksInfo	Counter32
	hwadslAtucChanPerfPrev1DayFecBlksInfo	Counter32
	hwadslAtucChanPerfPrev1DayHecBlksInfo	Counter32
	hwadslAtucChanPerfPrev1DayCrcBlksInfo	Counter32
	hwadslAtucChanRtxCWInfo	Gauge32
	hwadslAtucChanRtxCorrectedCWInfo	Gauge32
	hwadslAtucChanRtxUncorrectedCWInfo	Gauge32
	hwadslAtucChanPerfCurr15MinRtxCWInfo	Gauge32
	hwadslAtucChanPerfCurr15MinRtxCorrectedCWInfo	Gauge32
	hwadslAtucChanPerfCurr15MinRtxUncorrectedCWInfo	Gauge32
	hwadslAtucChanPerfCurr1DayRtxCWInfo	Gauge32
	hwadslAtucChanPerfCurr1DayRtxCorrectedCWInfo	Gauge32
	hwadslAtucChanPerfCurr1DayRtxUncorrectedCWInfo	Gauge32
	hwadslAtucChanPerfPrev1DayRtxCWInfo	Gauge32
	hwadslAtucChanPerfPrev1DayRtxCorrectedCWInfo	Gauge32
	hwadslAtucChanPerfPrev1DayRtxUncorrectedCWInfo	Gauge32
	hwadslAtucChanCurr15MStartTime	DateAndTime
	hwadslAtucChanCurr1DayStartTime	DateAndTime

HwadslAturChanPerfDataInfoEntry
SEQUENCE
	hwadslAturChanFecBlksInfo	Counter32
	hwadslAturChanHecBlksInfo	Counter32
	hwadslAturChanCrcBlksInfo	Counter32
	hwadslAturChanPerfCurr15MinFecBlksInfo	Counter32
	hwadslAturChanPerfCurr15MinHecBlksInfo	Counter32
	hwadslAturChanPerfCurr15MinCrcBlksInfo	Counter32
	hwadslAturChanPerfCurr1DayFecBlksInfo	Counter32
	hwadslAturChanPerfCurr1DayHecBlksInfo	Counter32
	hwadslAturChanPerfCurr1DayCrcBlksInfo	Counter32
	hwadslAturChanPerfPrev1DayFecBlksInfo	Counter32
	hwadslAturChanPerfPrev1DayHecBlksInfo	Counter32
	hwadslAturChanPerfPrev1DayCrcBlksInfo	Counter32
	hwadslAturChanRtxCWInfo	Gauge32
	hwadslAturChanRtxCorrectedCWInfo	Gauge32
	hwadslAturChanRtxUncorrectedCWInfo	Gauge32
	hwadslAturChanPerfCurr15MinRtxCWInfo	Gauge32
	hwadslAturChanPerfCurr15MinRtxCorrectedCWInfo	Gauge32
	hwadslAturChanPerfCurr15MinRtxUncorrectedCWInfo	Gauge32
	hwadslAturChanPerfCurr1DayRtxCWInfo	Gauge32
	hwadslAturChanPerfCurr1DayRtxCorrectedCWInfo	Gauge32
	hwadslAturChanPerfCurr1DayRtxUncorrectedCWInfo	Gauge32
	hwadslAturChanPerfPrev1DayRtxCWInfo	Gauge32
	hwadslAturChanPerfPrev1DayRtxCorrectedCWInfo	Gauge32
	hwadslAturChanPerfPrev1DayRtxUncorrectedCWInfo	Gauge32
	hwadslAturChanCurr15MStartTime	DateAndTime
	hwadslAturChanCurr1DayStartTime	DateAndTime

HwadslAturChanIntervalInfoEntry
SEQUENCE
	hwadslAturChanIntervalFecBlksInfo	PerfIntervalCount
	hwadslAturChanIntervalHecBlksInfo	PerfIntervalCount
	hwadslAturChanIntervalCrcBlksInfo	PerfIntervalCount
	hwadslAturChanIntervalRtxCWInfo	Gauge32
	hwadslAturChanIntervalRtxCorrectedCWInfo	Gauge32
	hwadslAturChanIntervalRtxUncorrectedCWInfo	Gauge32
	hwAdslAturChanIntervalStartTime	DateAndTime

HwadslLineAlarmConfProfileCfgEntry
SEQUENCE
	hwadslLineAlarmConfProfileDyingGaspCfg	INTEGER
	hwadslLineAlarmConfProfXturThresh15MinLeftrs	HCPerfIntervalThreshold
	hwAdslLineAlarmConfProfileActiveFailAlarmSwitch	INTEGER

HwAdslPortPerformanceStatInfoEntry
SEQUENCE
	hwAdslPort15minutesPerformanceIntervalIndex	Integer32
	hwAdslPort15minutesPerformanceInBytesInfo	Counter32
	hwAdslPort15minutesPerformanceOutBytesInfo	Counter32
	hwAdslPortSyncSuccNumberInfo	Counter32
	hwAdslPortSyncFailNumberInfo	Counter32
	hwAdslPortAtucCodeViolationInfo	Counter32
	hwAdslPortAturCodeViolationInfo	Counter32
	hwAdslPortAtucFecSecondsInfo	Counter32
	hwAdslPortAturFecSecondsInfo	Counter32
	hwAdslPortCurrent15minutesTimeElapseInfo	Counter32
	hwAdslPortAtucHecDropCellsCntInfo	Counter32
	hwAdslPortAturHecDropCellsCntInfo	Counter32
	hwAdslLineConfProfileInfo	OCTET STRING
	hwAdslPort15minUpTimeInfo	Counter32
	hwAdslAtucCurrAtnInfo	Gauge32
	hwAdslAtucCurrSnrMgnInfo	Integer32
	hwAdslAtucCurrAttainableRateInfo	Gauge32
	hwAdslAtucChanCurrTxRateInfo	Gauge32
	hwAdslAturCurrAtnInfo	Gauge32
	hwAdslAturCurrSnrMgnInfo	Integer32
	hwAdslAturCurrAttainableRateInfo	Gauge32
	hwAdslAturChanCurrTxRateInfo	Gauge32
	hwAdslAtucIntervalESsInfo	PerfIntervalCount
	hwAdslAtucIntervalLofsInfo	PerfIntervalCount
	hwAdslAtucIntervalLolsInfo	PerfIntervalCount
	hwAdslAtucIntervalLossInfo	PerfIntervalCount
	hwAdslAtucIntervalLprsInfo	PerfIntervalCount
	hwAdslAturIntervalESsInfo	PerfIntervalCount
	hwAdslAturIntervalLofsInfo	PerfIntervalCount
	hwAdslAturIntervalLossInfo	PerfIntervalCount
	hwAdslAturIntervalLprsInfo	PerfIntervalCount
	hwAdslAtucChanIntervalReceivedBlksInfo	PerfIntervalCount
	hwAdslAtucChanIntervalTransmittedBlksInfo	PerfIntervalCount
	hwAdslAtucChanIntervalCorrectedBlksInfo	PerfIntervalCount
	hwAdslAtucChanIntervalUncorrectBlksInfo	PerfIntervalCount
	hwAdslAturChanIntervalReceivedBlksInfo	PerfIntervalCount
	hwAdslAturChanIntervalTransmittedBlksInfo	PerfIntervalCount
	hwAdslAturChanIntervalCorrectedBlksInfo	PerfIntervalCount
	hwAdslAturChanIntervalUncorrectBlksInfo	PerfIntervalCount
	hwAdslAtucIntervalSesLInfo	PerfIntervalCount
	hwAdslAtucIntervalUasLInfo	PerfIntervalCount
	hwAdslAturIntervalSesLInfo	PerfIntervalCount
	hwAdslAturIntervalUasLInfo	PerfIntervalCount
	hwAdslPortCurrentActModeInfo	INTEGER

HwadslPortRateChangeTrapParaInfoEntry
SEQUENCE
	hwAdslPortRateChangeTrapIPIAIDInfo	OCTET STRING
	hwAdslPortRateChangeTrapMUXIDInfo	OCTET STRING
	hwAdslPortRateChangeTrapTimeStampInfo	Counter32
	hwAdslPortRateChangeTrapDSLineRateInfo	Gauge32
	hwAdslPortRateChangeTrapUSLineRateInfo	Gauge32
	hwAdslPortRateChangeTrapEventTypeInfo	OCTET STRING
	hwAdslPortRateChangeTrapDslTypeInfo	OCTET STRING

HwadslAtucPerfDataInfoEntry
SEQUENCE
	hwAdslAtucPerfFailFullInitsInfo	Counter32
	hwAdslAtucPerfCurr15MinFailFullInitsInfo	Counter32
	hwAdslAtucPerfCurr1DayFailFullInitsInfo	Counter32
	hwAdslAtucPerfPrev1DayFailFullInitsInfo	Counter32
	hwAdslAtucPerfFullInitsInfo	Counter32
	hwAdslAtucPerfCurr15MinFullInitsInfo	Counter32
	hwAdslAtucPerfCurr1DayFullInitsInfo	Counter32
	hwAdslAtucPerfPrev1DayFullInitsInfo	Counter32
	hwAdslAtucPerfCurr15MLeftrs	Counter32
	hwAdslAtucPerfCurr15MEfb	Counter32
	hwAdslAtucPerfCurr15MMinEftr	Counter32
	hwAdslAtucPerfCurr1DayLeftrs	Counter32
	hwAdslAtucPerfCurr1DayEfb	Counter32
	hwAdslAtucPerfCurr1DayMinEftr	Counter32
	hwAdslAtucPerfPrev1DayLeftrs	Counter32
	hwAdslAtucPerfPrev1DayEfb	Counter32
	hwAdslAtucPerfPrev1DayMinEftr	Counter32
	hwAdslAtucPerfCurrEverBeforeLeftrs	Counter32
	hwAdslAtucPerfCurrEverBeforeEfb	Counter32
	hwAdslAtucPerfCurrEverBeforeMinEftr	Counter32
	hwAdslAtucPerfCurr15MStartTime	DateAndTime
	hwAdslAtucPerfCurr1DayStartTime	DateAndTime
	hwAdslAtucPerfCurr15MInmainpeq	OCTET STRING
	hwAdslAtucPerfCurr15MInmame	Counter32
	hwAdslAtucPerfCurr15MInmaiat	OCTET STRING
	hwAdslAtucPerfCurr1DayInmainpeq	OCTET STRING
	hwAdslAtucPerfCurr1DayInmame	Counter32
	hwAdslAtucPerfCurr1DayInmaiat	OCTET STRING
	hwAdslAtucPerfPre1DayInmainpeq	OCTET STRING
	hwAdslAtucPerfPre1DayInmame	Counter32
	hwAdslAtucPerfPre1DayInmaiat	OCTET STRING
	hwAdslAtucPerfCurrEverBeforeInmainpeq	OCTET STRING
	hwAdslAtucPerfCurrEverBeforeInmame	Counter32
	hwAdslAtucPerfCurrEverBeforeInmaiat	OCTET STRING

HwadslAtucIntervalInfoEntry
SEQUENCE
	hwAdslAtucIntervalFailFullInitsInfo	Counter32
	hwAdslAtucIntervalFullInitsInfo	Counter32
	hwAdslAtucIntervalLeftrs	Counter32
	hwAdslAtucIntervalEfb	Counter32
	hwAdslAtucIntervalMinEftr	Counter32
	hwAdslAtucIntervalStartTime	DateAndTime
	hwAdslAtucIntervalInmainpeq	OCTET STRING
	hwAdslAtucIntervalInmame	Counter32
	hwAdslAtucIntervalInmaiat	OCTET STRING

HwadslAtucChanIntervalInfoEntry
SEQUENCE
	hwadslAtucChanIntervalFecBlksInfo	PerfIntervalCount
	hwadslAtucChanIntervalHecBlksInfo	PerfIntervalCount
	hwadslAtucChanIntervalCrcBlksInfo	PerfIntervalCount
	hwadslAtucChanIntervalRtxCWInfo	Gauge32
	hwadslAtucChanIntervalRtxCorrectedCWInfo	Gauge32
	hwadslAtucChanIntervalRtxUncorrectedCWInfo	Gauge32
	hwAdslAtucChanIntervalStartTime	DateAndTime

HwAdsl2SCStatusInfoEntry
SEQUENCE
	hwAdsl2SCStatusDirectionInfo	INTEGER
	hwAdsl2SCStatusSnrInfo	OCTET STRING
	hwAdsl2SCStatusBitsAllocInfo	OCTET STRING
	hwAdsl2SCStatusGainAllocInfo	OCTET STRING
	hwAdsl2SCStatusLogInfo	OCTET STRING
	hwAdsl2SCStatusQlnInfo	OCTET STRING
	hwAdsl2SCStatusSnrMarginInfo	OCTET STRING
	hwAdsl2SCStatusTxPSDInfo	OCTET STRING

HwxdslDynamicProfCfgEntry
SEQUENCE
	hwxdslDynamicProfProfileNameCfg	OCTET STRING
	hwxdslDynamicProfXtuTransSysEnaCfg	BITS
	hwxdslDynamicProfBitSwapDSCfg	INTEGER
	hwxdslDynamicProfBitSwapUSCfg	INTEGER
	hwxdslDynamicProfTargetSnrmDsCfg	Unsigned32
	hwxdslDynamicProfTargetSnrmUsCfg	Unsigned32
	hwxdslDynamicProfMaxSnrmDsCfg	Unsigned32
	hwxdslDynamicProfMaxSnrmUsCfg	Unsigned32
	hwxdslDynamicProfMinSnrmDsCfg	Unsigned32
	hwxdslDynamicProfMinSnrmUsCfg	Unsigned32
	hwxdslDynamicProfCh1MinProtectionDsCfg	INTEGER
	hwxdslDynamicProfCh1MinProtectionUsCfg	INTEGER
	hwxdslDynamicProfCh1MaxDelayDsCfg	Unsigned32
	hwxdslDynamicProfCh1MaxDelayUsCfg	Unsigned32
	hwxdslDynamicProfCh2MinProtectionDsCfg	INTEGER
	hwxdslDynamicProfCh2MinProtectionUsCfg	INTEGER
	hwxdslDynamicProfCh2MaxDelayDsCfg	Unsigned32
	hwxdslDynamicProfCh2MaxDelayUsCfg	Unsigned32
	hwxdslDynamicProfPmModeCfg	BITS
	hwxdslDynamicProfL0TimeCfg	Unsigned32
	hwxdslDynamicProfL2TimeCfg	Unsigned32
	hwxdslDynamicProfL2AtprCfg	Unsigned32
	hwxdslDynamicProfL2AtprtCfg	Unsigned32
	hwxdslDynamicProfDpboEPsdCfg	OCTET STRING
	hwxdslDynamicProfDpboEsELCfg	Unsigned32
	hwxdslDynamicProfDpboEscmCfg	OCTET STRING
	hwxdslDynamicProfDpboMusCfg	Unsigned32
	hwxdslDynamicProfDpboFMinCfg	Unsigned32
	hwxdslDynamicProfDpboFMaxCfg	Unsigned32
	hwxdslDynamicProfUpboPsdBandCfg	OCTET STRING
	hwxdslDynamicProfUpboKLFCfg	INTEGER
	hwxdslDynamicProfUpboKLCfg	Unsigned32
	hwxdslDynamicProfRfiBandsCfg	OCTET STRING
	hwxdslDynamicProfToneBlackOutCfg	OCTET STRING
	hwxdslDynamicProfCarMaskDSCfg	OCTET STRING
	hwxdslDynamicProfCarMaskUSCfg	OCTET STRING
	hwxdslDynamicProfXdslModeCfg	INTEGER
	hwxdslDynamicProfMaxNomPsdDsCfg	Integer32
	hwxdslDynamicProfMaxNomPsdUsCfg	Integer32
	hwxdslDynamicProfMaxNomAtpDsCfg	Unsigned32
	hwxdslDynamicProfMaxNomAtpUsCfg	Unsigned32
	hwxdslDynamicProfPsdMaskDsCfg	OCTET STRING
	hwxdslDynamicProfPsdMaskUsCfg	OCTET STRING
	hwxdslDynamicProfLimitMaskCfg	INTEGER
	hwxdslDynamicProfClassMaskCfg	INTEGER
	hwxdslDynamicProfBandOptUsageCfg	INTEGER
	hwxdslDynamicProfVirtualNoiseModeDsCfg	INTEGER
	hwxdslDynamicProfVirtualNoiseModeUsCfg	INTEGER
	hwxdslDynamicProfVirtualNoiseDsCfg	OCTET STRING
	hwxdslDynamicProfVirtualNoiseUsCfg	OCTET STRING
	hwxdslDynamicProfRowStatusCfg	RowStatus

HwXdslPortIopCaptureInfoEntry
SEQUENCE
	hwXdslPortIopCaptureOperTypeCfg	INTEGER
	hwXdslPortIopCaptureOperStatusInfo	INTEGER

HwXdslDynamicInfoCollectInfoEntry
SEQUENCE
	hwXdslDynamicInfoCollectInfo	INTEGER
	hwXdslDynamicInfoCollectStatusInfo	INTEGER
	hwXdslDynamicInfoCollectTimeInfo	DateAndTime
	hwXdslDynamicInfoCollectPortList	OCTET STRING

HwadslAturPerfDataInfoEntry
SEQUENCE
	hwAdslAturPerfCurr15MStartTime	DateAndTime
	hwAdslAturPerfCurr1DayStartTime	DateAndTime
	hwAdslAturPerfCurr15MInmainpeq	OCTET STRING
	hwAdslAturPerfCurr15MInmame	Counter32
	hwAdslAturPerfCurr15MInmaiat	OCTET STRING
	hwAdslAturPerfCurr1DayInmainpeq	OCTET STRING
	hwAdslAturPerfCurr1DayInmame	Counter32
	hwAdslAturPerfCurr1DayInmaiat	OCTET STRING
	hwAdslAturPerfPre1DayInmainpeq	OCTET STRING
	hwAdslAturPerfPre1DayInmame	Counter32
	hwAdslAturPerfPre1DayInmaiat	OCTET STRING
	hwAdslAturPerfCurrEverBeforeInmainpeq	OCTET STRING
	hwAdslAturPerfCurrEverBeforeInmame	Counter32
	hwAdslAturPerfCurrEverBeforeInmaiat	OCTET STRING
	hwAdslAturPerfCurr15MLeftrs	Counter32
	hwAdslAturPerfCurr15MEfb	Counter32
	hwAdslAturPerfCurr15MMinEftr	Counter32
	hwAdslAturPerfCurr1DayLeftrs	Counter32
	hwAdslAturPerfCurr1DayEfb	Counter32
	hwAdslAturPerfCurr1DayMinEftr	Counter32
	hwAdslAturPerfPrev1DayLeftrs	Counter32
	hwAdslAturPerfPrev1DayEfb	Counter32
	hwAdslAturPerfPrev1DayMinEftr	Counter32
	hwAdslAturPerfCurrEverBeforeLeftrs	Counter32
	hwAdslAturPerfCurrEverBeforeEfb	Counter32
	hwAdslAturPerfCurrEverBeforeMinEftr	Counter32

HwadslAturIntervalInfoEntry
SEQUENCE
	hwAdslAturIntervalStartTime	DateAndTime
	hwAdslAturIntervalInmainpeq	OCTET STRING
	hwAdslAturIntervalInmame	Counter32
	hwAdslAturIntervalInmaiat	OCTET STRING
	hwAdslAturIntervalLeftrs	Counter32
	hwAdslAturIntervalEfb	Counter32
	hwAdslAturIntervalMinEftr	Counter32

Defined Values

hwAdsl		1.3.6.1.4.1.2011.6.31
This MIB is used for defining Huawei's ADSL management MIB objects.
MODULE-IDENTITY

hwAdslMibObjects		1.3.6.1.4.1.2011.6.31.1
OBJECT IDENTIFIER

hwadslAturChanInfoTable		1.3.6.1.4.1.2011.6.31.1.1
This table provides the channel parameters of the ATUR end of each port. The index of this table is ifIndex.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HwadslAturChanInfoEntry

hwadslAturChanInfoEntry		1.3.6.1.4.1.2011.6.31.1.1.1
This table provides the channel parameters of the ATUR end of each port. The index of this entry is ifIndex.
Status: current	Access: not-accessible
OBJECT-TYPE
	HwadslAturChanInfoEntry

hwadslAturChanCurrINPInfo		1.3.6.1.4.1.2011.6.31.1.1.1.1
Indicates Impulse Noise Protection on upstream direction. The value multiply 1/10000 is the real value. Unit: DMT Symbol
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

hwadslAturChanRsSymbolsInfo		1.3.6.1.4.1.2011.6.31.1.1.1.2
Indicates Reed-Solomon symbols on upstream direction. The value multiply 1/10000 is the real value. Unit: byte
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

hwadslAturChanRsRedundancyInfo		1.3.6.1.4.1.2011.6.31.1.1.1.3
Indicates Reed-Solomon redundancy on upstream direction. Unit: byte
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

hwadslAturChanRsDepthInfo		1.3.6.1.4.1.2011.6.31.1.1.1.4
Indicates Reed-Solomon depth on upstream direction. Unit: byte
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

hwadslAturChanSymbolLengthInfo		1.3.6.1.4.1.2011.6.31.1.1.1.5
Indicates the Bit Number of the DMT Symbol on upstream direction. Unit: bit
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

hwadslAturChanPhyRrrcBitsInfo		1.3.6.1.4.1.2011.6.31.1.1.1.6
The bits in the channel that used to retransmission on upstream direction.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

hwadslAturChanPhyRtxQueueInfo		1.3.6.1.4.1.2011.6.31.1.1.1.7
Queues in send buffer on upstream direction.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

hwadslAturChanRsSizeInfo		1.3.6.1.4.1.2011.6.31.1.1.1.8
Indicates Reed-Solomon Codeword Size on upstream direction. Range: 0-255 Unit: byte
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

hwadslAturChanCodeGainInfo		1.3.6.1.4.1.2011.6.31.1.1.1.9
Indicates Code Gain on upstream direction. It ranges from 0 to 16 units of 0.5 dB (physical values are 0 to 8 dB).
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

hwadslAturChanL2NetDataRate		1.3.6.1.4.1.2011.6.31.1.1.1.10
In L2 state, this parameter reports the Net Data Rate in low power state. The data rate is coded in steps of 1000 bit/s.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

hwadslAturPhysInfoTable		1.3.6.1.4.1.2011.6.31.1.2
This object provides the physical layer parameters of each ATUR. The index of this table is ifIndex.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HwadslAturPhysInfoEntry

hwadslAturPhysInfoEntry		1.3.6.1.4.1.2011.6.31.1.2.1
This object provides the physical layer parameters of each ATUR. The index of this entry is ifIndex.
Status: current	Access: not-accessible
OBJECT-TYPE
	HwadslAturPhysInfoEntry

hwadslAturTransmissionCapabilitiesInfo		1.3.6.1.4.1.2011.6.31.1.2.1.1
The ATU transmission system capability list of the different coding types. It is coded in a bit-map representation with 1 or more bits set. A bit set to '1' means that the ATU supports the respective coding. The value may be derived from the handshaking procedures defined in G.994.1.
Status: current	Access: read-only
OBJECT-TYPE
	Adsl2TransmissionModeType

hwAdslAturCurrSignalAtnInfo		1.3.6.1.4.1.2011.6.31.1.2.1.2
The signal attenuation value on ATUR: It indicates the difference between the transmit signal of the ATU-C and the receive signal of the ATU-R. Range: 0-630 Unit: tenth dB
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32	0..630

hwadslAturInvG994VendorId		1.3.6.1.4.1.2011.6.31.1.2.1.3
The ATU G.994.1 Vendor ID as inserted in the G.994.1 CL/CLR message. It consists of 8 binary octets, including a country code followed by a (regionally allocated) provider code, as defined in Recommendation T.35.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..16)

hwadslAturLInvSelfTestResult		1.3.6.1.4.1.2011.6.31.1.2.1.4
The ATU self-test result, coded as a 32-bit value. The most significant octet of the result is '0' if the self-test passed, and '1' if the self-test failed. The interpretation of the other octets is vendor discretionary.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

hwadslAtucChanInfoTable		1.3.6.1.4.1.2011.6.31.1.3
This object provides the channel parameters of each ATUC. The index of this table is ifIndex.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HwadslAtucChanInfoEntry

hwadslAtucChanInfoEntry		1.3.6.1.4.1.2011.6.31.1.3.1
This object provides the channel parameters of each ATUC. The index of this entry is ifIndex.
Status: current	Access: not-accessible
OBJECT-TYPE
	HwadslAtucChanInfoEntry

hwadslAtucChanCurrINPInfo		1.3.6.1.4.1.2011.6.31.1.3.1.1
Indicates Impulse Noise Protection on downstream direction. The value multiply 1/10000 is the real value. If retransmission is used in a given transmit direction, this parameter reports the actual impulse noise protection (INP) against SHINE (under specific conditions detailed in G.998.4) on the bearer channel in the L0 state.In the L2 state, the parameter contains the INP in the previous L0 state. Unit: DMT Symbol
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

hwadslAtucChanRsSymbolsInfo		1.3.6.1.4.1.2011.6.31.1.3.1.2
Indicates Reed-Solomon symbols on downstream direction. The value multiply 1/10000 is the real value. Unit: byte
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

hwadslAtucChanRsRedundancyInfo		1.3.6.1.4.1.2011.6.31.1.3.1.3
Indicates Reed-Solomon redundancy on downstream direction. Unit: byte
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

hwadslAtucChanRsDepthInfo		1.3.6.1.4.1.2011.6.31.1.3.1.4
Indicates Reed-Solomon depth on downstream direction. Unit: byte
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

hwadslAtucChanSymbolLengthInfo		1.3.6.1.4.1.2011.6.31.1.3.1.5
Indicates the Bit Number of the DMT Symbol on downstream direction. Unit: bit
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

hwadslAtucChanPhyRrrcBitsInfo		1.3.6.1.4.1.2011.6.31.1.3.1.6
The bits in the channel that used to retransmission on downstream direction.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

hwadslAtucChanPhyRtxQueueInfo		1.3.6.1.4.1.2011.6.31.1.3.1.7
Queues in send buffer on downstream direction.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

hwadslAtucChanRsSizeInfo		1.3.6.1.4.1.2011.6.31.1.3.1.8
Indicates Reed-Solomon Codeword Size on downstream direction. Range: 0-255 Unit: byte
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

hwadslAtucChanCodeGainInfo		1.3.6.1.4.1.2011.6.31.1.3.1.9
Indicates Code Gain on downstream direction. It ranges from 0 to 16 units of 0.5 dB (physical values are 0 to 8 dB).
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

hwadslAtucChanPcbInfo		1.3.6.1.4.1.2011.6.31.1.3.1.10
Indicates Power Cut-back on downstream direction. It ranges from 0 to 400 units of 0.1 dB (physical values are 0 to 40 dB) Unit: tenth dB
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

hwadslAtucChanActNetDataRate		1.3.6.1.4.1.2011.6.31.1.3.1.11
Independent whether retransmission is used or not in a given transmit direction: In L0 state, this parameter reports the Net Data Rate (as specified in G.992.3, G.992.5 or G.993.2) at which the bearer channel is operating. In L2 state, the parameter contains the Net Data Rate (as specified in G.992.3, G.992.5 or G.993.2) in the previous L0 state. The data rate is coded in steps of 1000 bit/s.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

hwadslAtucChanActINPAgainstREIN		1.3.6.1.4.1.2011.6.31.1.3.1.12
If retransmission is used in a given transmit direction, this parameter reports the actual impulse noise protection (INP) against REIN (under specific conditions detailed in G.998.4) on the bearer channel in the L0 state. In the L2 state, the parameter contains the INP in the previous L0 state. The value is coded in fractions of DMT symbols with a granularity of 0.1 symbols.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

hwadslAtucChanL2NetDataRate		1.3.6.1.4.1.2011.6.31.1.3.1.13
In L2 state, this parameter reports the Net Data Rate in low power state. The data rate is coded in steps of 1000 bit/s.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

hwadslLineConfProfileCfgTable		1.3.6.1.4.1.2011.6.31.1.4
This table contains information on the ADSL line configuration. The index of this table is adslLineConfProfileName.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HwadslLineConfProfileCfgEntry

hwadslLineConfProfileCfgEntry		1.3.6.1.4.1.2011.6.31.1.4.1
This table contains information on the ADSL line configuration. The index of this entry is adslLineConfProfileName.
Status: current	Access: not-accessible
OBJECT-TYPE
	HwadslLineConfProfileCfgEntry

hwAdslAtucConfDownBitSwapCfg		1.3.6.1.4.1.2011.6.31.1.4.1.1
Enables and disables the down bitswap of a template. Options: 1. enabled(1) - Indicates that the downstream bit swap is enabled 2. disabled(2) - Indicates that the downstream bit swap is disabled Default: enabled(1)
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

hwAdslAtucConfUpBitSwapCfg		1.3.6.1.4.1.2011.6.31.1.4.1.2
Enables and disables the up bitswap of a template. Options: 1. enabled(1) - Indicates that the upstream bit swap is enabled 2. disabled(2) - Indicates that the upstream bit swap is disabled Default: enabled(1)
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

hwAdslTrellionsModeEnableCfg		1.3.6.1.4.1.2011.6.31.1.4.1.3
Enables and disables the Trellions mode. Options: 1. enabled(1) - Indicates that the trellis coding is enabled. 2. disabled(2) - Indicates that the trellis coding is disabled. Default: enabled(1)
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

hwAdslTransmissionModeCfg		1.3.6.1.4.1.2011.6.31.1.4.1.4
Indicates the transmission mode of this channel. Options: 1. all(1) - All (G992.1, G992.2, T1.413)(Default) 2. fullRate(2) - Full rate(G992.1 or T1.413) 3. gliteOnly(3) - G992.2(g.lite) only 4. t1413Only(4) - T1.413 only 5. gdmtOnly(5) - G992.1,G992.3,G992.5,(g.dmt) only 6. ghs(6) - g.hs (G992.1,G992.2,G992.3,G992.4,G992.5,G992.5 is prior) 7. g992Dot1(7) - G992.1 8. g992Dot2(8) - G992.2 9. g992Dot3(9) - G992.3 10. g992Dot4(10) - G992.4 11. g992Dot5(11) - G992.5 12. adslAllOnly(12) - ADSL ALL ONLY 13. adslAndAdsl2(13) - G.992.1,G.992.3,T1.413(Not support) Default: all(1)
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	all(1), fullRate(2), gliteOnly(3), t1413Only(4), gdmtOnly(5), ghs(6), g992Dot1(7), g992Dot2(8), g992Dot3(9), g992Dot4(10), g992Dot5(11), adslAllOnly(12), adslAndAdsl2(13)

hwAdslLinePvcCfgTable		1.3.6.1.4.1.2011.6.31.1.5
PVC configuration table of the ADSL port. The indexes of this table are ifIndex,hwAdsllinePvcVpi,and hwAdsllinePvcVci.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HwAdslLinePvcCfgEntry

hwAdslLinePvcCfgEntry		1.3.6.1.4.1.2011.6.31.1.5.1
PVC configuration table of the ADSL port. The indexes of this entry are ifIndex,hwAdsllinePvcVpi,and hwAdsllinePvcVci.
Status: current	Access: not-accessible
OBJECT-TYPE
	HwAdslLinePvcCfgEntry

hwAdslLinePvcVlanIdCfg		1.3.6.1.4.1.2011.6.31.1.5.1.3
The VLAN ID of the adsl line PVC. Range: 1-4000
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	1..4000

hwAdslLinePvcPriorityCfg		1.3.6.1.4.1.2011.6.31.1.5.1.4
The Priority value of the adsl line PVC. Range: 0-7 Default: 0
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	0..7

hwAdslLinePvcDsBandCfg		1.3.6.1.4.1.2011.6.31.1.5.1.5
The down stream band of the adsl line PVC. Range: 0-450 Default: 0
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	0..450

hwAdslLinePvcUsBandCfg		1.3.6.1.4.1.2011.6.31.1.5.1.6
The up stream band of the adsl line PVC. Range: 0-450
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	0..450

hwAdslLinePvcMCastEnableCfg		1.3.6.1.4.1.2011.6.31.1.5.1.7
This object allows the adsl line PVC to support multicast. Options: 1. enable(1) - Indicates that the PVC of the ADSL port is enabled to support the multicast 2. disable(2) - Indicates that the PVC of the ADSL port is disabled to support the multicast Default: disable(2)
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

hwAdslLinePvcIGMPEnableCfg		1.3.6.1.4.1.2011.6.31.1.5.1.8
This object allows the adsl line PVC to support IGMP. Options: 1. enable(1) - Indicates that the PVC of the ADSL port is enabled to support IGMP 2. disable(2) - Indicates that the PVC of the ADSL port is disabled to support IGMP Default: disable(2)
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

hwAdslLinePvcIndexCfg		1.3.6.1.4.1.2011.6.31.1.5.1.9
The index of the adsl line PVC. Range: 1-8
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	1..8

hwAdslLinePvcConnectTypeCfg		1.3.6.1.4.1.2011.6.31.1.5.1.10
The Connected type of the adsl line PVC Options: 1. auto(0) - The Connected type of the adsl line PVC is auto 2. llc1483B(1) - The Connected type of the adsl line PVC is llc1483B 3. pppoaLLC(2) - The Connected type of the adsl line PVC is pppoaLLC 4. pppoaVcmux(3) - The Connected type of the adsl line PVC is pppoaVcmux 5. ipoaLLc(4) - The Connected type of the adsl line PVC is ipoaLLc 6. ipoaVcmux(5) - The Connected type of the adsl line PVC is ipoaVcmux
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	auto(0), llc1483B(1), pppoaLLC(2), pppoaVcmux(3), ipoaLLc(4), ipoaVcmux(5)

hwAdslLinePvcRowStatusCfg		1.3.6.1.4.1.2011.6.31.1.5.1.11
Row status. Add or delete a table item.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

hwadslLineCfgTable		1.3.6.1.4.1.2011.6.31.1.6
This table includes common attributes describing both ends of the line. The index of this table is ifIndex.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HwadslLineCfgEntry

hwadslLineCfgEntry		1.3.6.1.4.1.2011.6.31.1.6.1
This table includes common attributes describing both ends of the line. The index of this entry is ifIndex.
Status: current	Access: not-accessible
OBJECT-TYPE
	HwadslLineCfgEntry

hwadslLineExtConfProfileCfg		1.3.6.1.4.1.2011.6.31.1.6.1.1
The value of this object identifies the row in the ADSL Extend Line Configuration Profile Table, (adslLineExtConfProfileTable), which applies to this ADSL line, and channels if applicable. NULL - indicates that there is no extend line profile bound to this port. Range: 0-32
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(0..32)

hwadslLineDynamicProfileCfg		1.3.6.1.4.1.2011.6.31.1.6.1.2
The value of this object identifies the row in the ADSL Dynamic Profile Table,which applies to this ADSL line, and channels if applicable. NULL - indicates that there is no Dynamic profile bound to this port. Range: 0-32
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(0..32)

hwAdslLineBitAllocationInfoTable		1.3.6.1.4.1.2011.6.31.1.7
This hwAdslLineBitAllocationInfoTable contains the detailed bit-allocation information for the current link. This information can be used to determine whether a given sub-carrier loop has sufficient margin to support ADSL data rates, and possibly to determine whether certain specific types of interference or line attenuation exist. The bit allocation information are only valid when the ATU-C is in the C-ACTIVE state. The index of this table is ifIndex.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HwAdslLineBitAllocationInfoEntry

hwAdslLineBitAllocationInfoEntry		1.3.6.1.4.1.2011.6.31.1.7.1
This hwAdslLineBitAllocationInfoTable contains the detailed bit-allocation information for the current link. This information can be used to determine whether a given sub-carrier loop has sufficient margin to support ADSL data rates, and possibly to determine whether certain specific types of interference or line attenuation exist. The bit allocation information are only valid when the ATU-C is in the C-ACTIVE state. The index of this entry is ifIndex.
Status: current	Access: not-accessible
OBJECT-TYPE
	HwAdslLineBitAllocationInfoEntry

hwAdslLineDownStreamBitsPerFrameInfo		1.3.6.1.4.1.2011.6.31.1.7.1.1
Number of bits required per frame in the downstream data path for the current configuration.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hwAdslLineUpStreamBitsPerFrameInfo		1.3.6.1.4.1.2011.6.31.1.7.1.2
Number of bits required per frame in the upstream data path for the current configuration.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hwAdslLineDownStreamBitAllocLowInfo		1.3.6.1.4.1.2011.6.31.1.7.1.3
when used to Adsl board This object contains the first 128 downstream sub-carrier bit allocations (sub-carrier # 1-128). This object is 64 bytes in length, where each byte contains 2 sub-carrier values. Byte 1 - 64 Downstream bit allocation (first 128 sub-carriers), one byte for two sub-carriers. 1 Bits 4 - 7 # bits in 1st downstream sub-carrier 1 Bits 0 - 3 # bits in 2nd downstream sub-carrier ... 64 Bits 4 - 7 # bits in 127th downstream sub-carrier 64 Bits 0 - 3 # bits in 128th downstream sub-carrier when used to Adsl2+ board This object contains the first 256 downstream sub-carrier bit allocations (sub-carrier # 1-256). This object is 256 bytes in length, where each byte contains 1 sub-carrier values. Byte 1 - 256 Downstream bit allocation (first 256 sub-carriers), one byte for one sub-carriers. 1 Bits 0 - 7 # bits in 1st downstream sub-carrier ... 255 Bits 0 - 7 # bits in 255th downstream sub-carrier 256 Bits 0 - 7 # bits in 256th downstream sub-carrier
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(256)

hwAdslLineDownStreamBitAllocHighInfo		1.3.6.1.4.1.2011.6.31.1.7.1.4
when used to Adsl board This object contains the second 128 downstream sub-carrier bit allocations (sub-carrier # 129-256). This object is 64 bytes in length, where each byte contains 2 sub-carrier values. Byte 1 - 64 Downstream bit allocation (second 128 sub-carriers), one byte for two sub-carriers. 1 Bits 4 - 7 # bits in 129th downstream sub-carrier 1 Bits 0 - 3 # bits in 130th downstream sub-carrier ... 64 Bits 4 - 7 # bits in 255th downstream sub-carrier 64 Bits 0 - 3 # bits in 256th downstream sub-carrier when used to Adsl2+ board This object contains the second 256 downstream sub-carrier bit allocations (sub-carrier # 257-512). This object is 256 bytes in length, where each byte contains 1 sub-carrier values. Byte 1 - 256 Downstream bit allocation (second 256 sub-carriers), one byte for one sub-carriers. 1 Bits 0 - 7 # bits in 1st downstream sub-carrier ... 255 Bits 0 - 7 # bits in 255th downstream sub-carrier 256 Bits 0 - 7 # bits in 256th downstream sub-carrier
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(256)

hwAdslLineUpStreamBitAllocInfo		1.3.6.1.4.1.2011.6.31.1.7.1.5
when used to Adsl board This Object contains 64 upstream sub-carrier bit allocations (sub-carrier # 1-64). This Object is 32 bytes in length, where each byte contains 2 sub-carrier values. Byte 1 - 32 Upstream bit allocation information, total: 32 bytes, one byte for two sub-carriers. 1 Bits 7 - 4 # bits in 1st upstream sub-carrier 1 Bits 3 - 0 # bits in 2nd upstream sub-carrier ... 32 Bits 7 - 4 # bits in 63rd upstream sub-carrier 32 Bits 3 - 0 # bits in 64th upstream sub-carrier when used to Adsl2+ board This Object contains 64 upstream sub-carrier bit allocations (sub-carrier # 1-64). This Object is 64 bytes in length, where each byte contains 1 sub-carrier values. Byte 1 - 64 Upstream bit allocation information, total: 64 bytes, one byte for one sub-carriers. 1 Bits 7 - 0 # bits in 1st upstream sub-carrier ... 64 Bits 7 - 0 # bits in 64th upstream sub-carrier
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(64)

hwXdslPortCfgTable		1.3.6.1.4.1.2011.6.31.1.8
This table includes xDSL(e.g. adsl,g.shdsl,vdsl...)port information. Used to support common attributes of the ADSL, G.SHDSL, and VDSL ports The index of this table is ifIndex.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HwXdslPortCfgEntry

hwXdslPortCfgEntry		1.3.6.1.4.1.2011.6.31.1.8.1
This table includes xDSL(e.g. adsl,g.shdsl,vdsl...)port information. Used to support common attributes of the ADSL, G.SHDSL, and VDSL ports The index of this entry is ifIndex.
Status: current	Access: not-accessible
OBJECT-TYPE
	HwXdslPortCfgEntry

hwXdslPortMaxMacLearnCfg		1.3.6.1.4.1.2011.6.31.1.8.1.1
Set Max MAC count on the xDSL port. Range: 0-255 Default: 255
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	0..255

hwXdslPortRateMonitorThresholdCfg		1.3.6.1.4.1.2011.6.31.1.8.1.2
Set Port monitoring rate threshold percent. Including upstream and downstream. Range: 0-100 Default: 0
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	0..100

hwXdslPortUpThresholdTxRateCfg		1.3.6.1.4.1.2011.6.31.1.8.1.3
Set Port monitoring upstream rate threshold value. Default: 0 Unit:bps
Status: current	Access: read-write
OBJECT-TYPE
	Gauge32

hwXdslPortDownThresholdTxRateCfg		1.3.6.1.4.1.2011.6.31.1.8.1.4
Set Port monitoring downstream rate threshold value. Default: 0 Unit:bps
Status: current	Access: read-write
OBJECT-TYPE
	Gauge32

hwXdslPortRateMonitorAlarmEnableCfg		1.3.6.1.4.1.2011.6.31.1.8.1.5
Enables or disables port rate monitor alarm. Options: 1. enabled(1) - Enables port rate monitor alarm 2. disabled(2) - Disables port rate monitor alarm
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

hwXdslPortUpTimeCfg		1.3.6.1.4.1.2011.6.31.1.8.1.6
Duration of the xDSL port activation Unit: second
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwXdslPortNTEPowerStatusCfg		1.3.6.1.4.1.2011.6.31.1.8.1.7
NTE power status, this object is defaulted off(2). Options: 1. on(1) - NTE power status is on 2. off(2) - NTE power status is off 3. unknown(3) - NTE power is in unknown status
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	on(1), off(2), unknown(3)

hwXdslPortCurrentUpRateCfg		1.3.6.1.4.1.2011.6.31.1.8.1.8
Xdsl port current upstream value. Range: 0-30000 Default: 0
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	Integer32	0..30000

hwXdslPortCurrentDownRateCfg		1.3.6.1.4.1.2011.6.31.1.8.1.9
Xdsl port current downstream value. Range: 0-30000 Default: 0
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	Integer32	0..30000

hwXdslPortFarEndRunStateCfg		1.3.6.1.4.1.2011.6.31.1.8.1.10
Remote running status of the xDSL port. This object is defaulted unknown(1). Options: 1. unknown(1) - Unknown status 2. noModem(2) - Port is not connected to modem 3. handshake(3) - Handshake status 4. showtime(4) - Port is activated
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	unknown(1), noModem(2), handshake(3), showtime(4)

hwXdslPortPowerStateCfg		1.3.6.1.4.1.2011.6.31.1.8.1.11
Xdsl port power state. Options: 1. l0(1) - Full-on state 2. l2(2) - Low power state 3. l3(3) - Idle state 4. l1(4) - Low power state 5. invalidValue(-1) - Invalid state Default: l0(1)
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	l0(1), l2(2), l3(3), l1(4), invalidValue(-1)

hwXdslPortUpCntCfg		1.3.6.1.4.1.2011.6.31.1.8.1.12
The up counts of xDSL port.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

hwXdslPortUpCntAdminStatusCfg		1.3.6.1.4.1.2011.6.31.1.8.1.13
Admin the up counts of xDSL port. Options: 1. reset(0) - Reset the up counts of xDSL port
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	reset(0)

hwXdslPortLastUpTimeCfg		1.3.6.1.4.1.2011.6.31.1.8.1.14
Last up time of a xDSL port.
Status: current	Access: read-only
OBJECT-TYPE
	DateAndTime

hwXdslPortLastDownTimeCfg		1.3.6.1.4.1.2011.6.31.1.8.1.15
Last down time of a xDSL port.
Status: current	Access: read-only
OBJECT-TYPE
	DateAndTime

hwXdslPortClearUpCntTimeCfg		1.3.6.1.4.1.2011.6.31.1.8.1.16
The time when up counts of a xDSL port is cleared.
Status: current	Access: read-only
OBJECT-TYPE
	DateAndTime

hwXdslPortRetrainCntCfg		1.3.6.1.4.1.2011.6.31.1.8.1.17
The retrain counts of xDSL Line.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

hwXdslPortLastRetrainReasonCfg		1.3.6.1.4.1.2011.6.31.1.8.1.18
The last retrain reson of xDSL Line, coded as bit mask. Only one bit can be set valid, all bits set valid means invalid retrain reason.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

hwXdslPortLoopFlagCfg		1.3.6.1.4.1.2011.6.31.1.8.1.19
Loop flag. Options: 1. false(0) - No loop 2. true (1) - Loop
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	false(0), true(1)

hwXdslPortUpThresholdCfg		1.3.6.1.4.1.2011.6.31.1.8.1.20
Set Port monitoring upstream rate threshold percent value. Range: 0-100 Default: 0
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	0..100

hwXdslPortDownThresholdCfg		1.3.6.1.4.1.2011.6.31.1.8.1.21
Set Port monitoring downstream rate threshold percent value. Range: 0-100 Default: 0
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	0..100

hwAdslLinePreActParaInfoTable		1.3.6.1.4.1.2011.6.31.1.9
This table provides one row for each ADSL PORT. Each row contains the preactived parameters. The index of this table is ifIndex.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HwAdslLinePreActParaInfoEntry

hwAdslLinePreActParaInfoEntry		1.3.6.1.4.1.2011.6.31.1.9.1
This table provides one row for each ADSL PORT. Each row contains the preactived parameters. The index of this entry is ifIndex.
Status: current	Access: not-accessible
OBJECT-TYPE
	HwAdslLinePreActParaInfoEntry

hwAdslAtucPrevSnrMgnInfo		1.3.6.1.4.1.2011.6.31.1.9.1.1
Noise Margin as seen by this ATU-C at the time of the last adslAtucRateChangeTrap event. Unit: tenth dB
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hwAdslAturPrevSnrMgnInfo		1.3.6.1.4.1.2011.6.31.1.9.1.2
Noise Margin as seen by this ATU-R at the time of the last adslAtucRateChangeTrap event. Unit: tenth dB
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hwAdslAtucPrevAttainableRateInfo		1.3.6.1.4.1.2011.6.31.1.9.1.3
Indicates the maximum attainable data rate by the ATU-C at the time of the last adslAtucRateChangeTrap event. Unit: bps
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

hwAdslAturPrevAttainableRateInfo		1.3.6.1.4.1.2011.6.31.1.9.1.4
Indicates the maximum attainable data rate by the ATU-R at the time of the last adslAtucRateChangeTrap event. Unit: bps
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

hwAdslAtucPreAtnInfo		1.3.6.1.4.1.2011.6.31.1.9.1.5
Measured difference in the total power transmitted as seen by this ATU-C at the time of the last adslAtucRateChangeTrap event. Unit: tenth dB
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

hwAdslAturPreAtnInfo		1.3.6.1.4.1.2011.6.31.1.9.1.6
Measured difference in the total power transmitted as seen by this ATU-R at the time of the last adslAtucRateChangeTrap event. Unit: tenth dB
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

hwAdslPreActiveTimeInfo		1.3.6.1.4.1.2011.6.31.1.9.1.7
The last time at that the port was activated.
Status: current	Access: read-only
OBJECT-TYPE
	DateAndTime

hwPortThreePriorityCfgTable		1.3.6.1.4.1.2011.6.31.1.10
Adsl port three priority table. The index of this table is ifIndex.
Status: obsolete	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HwPortThreePriorityCfgEntry

hwPortThreePriorityCfgEntry		1.3.6.1.4.1.2011.6.31.1.10.1
Adsl port three priority table. The index of this entry is ifIndex.
Status: obsolete	Access: not-accessible
OBJECT-TYPE
	HwPortThreePriorityCfgEntry

hwPortThreePriorityEnableCfg		1.3.6.1.4.1.2011.6.31.1.10.1.1
Three Priority status of the interface. Options: 1. enable(1) - Adsl port three priority is enabled 2. disable(2) - Adsl port three priority is disabled
Status: obsolete	Access: read-write
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

hwSlotMacMaxNoLimitCfgTable		1.3.6.1.4.1.2011.6.31.1.11
Max mac learning no limit table. The indexes of this table are hwFrameIndex and hwSlotIndex.
Status: obsolete	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HwSlotMacMaxNoLimitCfgEntry

hwSlotMacMaxNoLimitCfgEntry		1.3.6.1.4.1.2011.6.31.1.11.1
Max mac learning no limit table. The indexes of this entry are hwFrameIndex and hwSlotIndex.
Status: obsolete	Access: not-accessible
OBJECT-TYPE
	HwSlotMacMaxNoLimitCfgEntry

hwSlotMacMaxNoLimitEnableCfg		1.3.6.1.4.1.2011.6.31.1.11.1.1
This object is used to set whether all the ports in the slot limits the maximum number of learning MAC addresses. Options: 1. enable(1) - Don't limit the max NO. of learning mac addresses in the slot 2. disable(2) - Limit the max NO. of learning mac addresses in the slot
Status: obsolete	Access: read-write
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

hwXdslPortStateStatisticInfoTable		1.3.6.1.4.1.2011.6.31.1.12
XDSL port state staticstic table. Used to support the statistics information about the status mapping and status of ports on service boards, such as the ADSL, G.SHDSL, and VDSL boards The indexes of this table are ifType, hwFrameIndex, hwSlotIndex.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HwXdslPortStateStatisticInfoEntry

hwXdslPortStateStatisticInfoEntry		1.3.6.1.4.1.2011.6.31.1.12.1
XDSL port state staticstic table. Used to support the statistics information about the status mapping and status of ports on service boards, such as the ADSL, G.SHDSL, and VDSL boards The indexes of this entry are ifType, hwFrameIndex, hwSlotIndex.
Status: current	Access: not-accessible
OBJECT-TYPE
	HwXdslPortStateStatisticInfoEntry

hwXdslPortStatePortNumberInfo		1.3.6.1.4.1.2011.6.31.1.12.1.1
This object is port number of one slot.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

hwXdslPortStateBitmapListInfo		1.3.6.1.4.1.2011.6.31.1.12.1.2
The type of port status: 2 failed; 8 testing; 9 activated; 10 activating; 11 deactivated; 18 localloopback; 19 remoteloopback; 20 blocked; 37 utopialoopback; 38 afeloopback; 39 hybridloopback; 255 unknown; The hwXdslPortStateBitmapListInfo describes the states of all ports. Every byte describe the current state of every port. The length is equal to the value of the hwXdslPortStatePortNumberInfo.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

hwXdslTotalOfActivatedPortsInfo		1.3.6.1.4.1.2011.6.31.1.12.1.3
The total of the activated ports.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

hwXdslTotalOfDeactivatedPortsInfo		1.3.6.1.4.1.2011.6.31.1.12.1.4
The total of the deactivated ports.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

hwXdslTotalOfActivatingPortsInfo		1.3.6.1.4.1.2011.6.31.1.12.1.5
The total of the activating ports.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

hwXdslTotalOfTestingPortsInfo		1.3.6.1.4.1.2011.6.31.1.12.1.6
The total of the Testing ports.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

hwXdslTotalOfBlockedPortsInfo		1.3.6.1.4.1.2011.6.31.1.12.1.7
The total of the blocked ports.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

hwXdslTotalOfLocalLoopbackPortsInfo		1.3.6.1.4.1.2011.6.31.1.12.1.8
The total of the local testing ports.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

hwXdslTotalOfRemoteLoopbackPortsInfo		1.3.6.1.4.1.2011.6.31.1.12.1.9
The total of the remote testing ports.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

hwXdslTotalOfFailedPortsInfo		1.3.6.1.4.1.2011.6.31.1.12.1.10
The total of the failed ports.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

hwXdslTotalOfUnknownPortsInfo		1.3.6.1.4.1.2011.6.31.1.12.1.11
The total of the unknown xDSL ports.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

hwadslLineExtConfProfileCfgTable		1.3.6.1.4.1.2011.6.31.1.13
This table contains information on the ADSL extend line configuration. One entry in this table reflects a extend line profile defined by a manager which can be used to configure the ADSL line. The index of this table is hwadslLineExtConfProfileNameCfg.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HwadslLineExtConfProfileCfgEntry

hwadslLineExtConfProfileCfgEntry		1.3.6.1.4.1.2011.6.31.1.13.1
This table contains information on the ADSL extend line configuration. One entry in this table reflects a extend line profile defined by a manager which can be used to configure the ADSL line. The index of this entry is hwadslLineExtConfProfileNameCfg.
Status: current	Access: not-accessible
OBJECT-TYPE
	HwadslLineExtConfProfileCfgEntry

hwadslLineExtConfProfileNameCfg		1.3.6.1.4.1.2011.6.31.1.13.1.1
This object is used by the hwadslLineExtConfProfileTable in order to identify a row of this table. Indicates the name of the extended line profile.
Status: current	Access: not-accessible
OBJECT-TYPE
	OCTET STRING	Size(1..32)

hwadslLineDisableToneSection1BeginCfg		1.3.6.1.4.1.2011.6.31.1.13.1.2
The begin index of the first section. Range: 0-511
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..511

hwadslLineDisableToneSection1EndCfg		1.3.6.1.4.1.2011.6.31.1.13.1.3
The end index of the first section. Range: 0-511
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..511

hwadslLineDisableToneSection1FlagCfg		1.3.6.1.4.1.2011.6.31.1.13.1.4
The enable flag of the first section. Options: 1. enabled(1) - The first tone section is enabled 2. disabled(2) - The first tone section is disabled
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

hwadslLineDisableToneSection2BeginCfg		1.3.6.1.4.1.2011.6.31.1.13.1.5
The begin index of the second section. Range: 0-511
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..511

hwadslLineDisableToneSection2EndCfg		1.3.6.1.4.1.2011.6.31.1.13.1.6
The end index of the second section. Range: 0-511
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..511

hwadslLineDisableToneSection2FlagCfg		1.3.6.1.4.1.2011.6.31.1.13.1.7
The enable flag of the second section. Options: 1. enabled(1) - The second tone section is enabled 2. disabled(2) - The second tone section is disabled
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

hwadslLineDisableToneSection3BeginCfg		1.3.6.1.4.1.2011.6.31.1.13.1.8
The begin index of the third section. Range: 0-511
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..511

hwadslLineDisableToneSection3EndCfg		1.3.6.1.4.1.2011.6.31.1.13.1.9
The end index of the third section. Range: 0-511
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..511

hwadslLineDisableToneSection3FlagCfg		1.3.6.1.4.1.2011.6.31.1.13.1.10
The enable flag of the third section. Options: 1. enabled(1) - The third tone section is enabled 2. disabled(2) - The third tone section is disabled
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

hwadslLineDisableToneSection4BeginCfg		1.3.6.1.4.1.2011.6.31.1.13.1.11
The begin index of the fourth section. Range: 0-511
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..511

hwadslLineDisableToneSection4EndCfg		1.3.6.1.4.1.2011.6.31.1.13.1.12
The end index of the fourth section. Range: 0-511
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..511

hwadslLineDisableToneSection4FlagCfg		1.3.6.1.4.1.2011.6.31.1.13.1.13
The enable flag of the fourth section. Options: 1. enabled(1) - The fourth tone section is enabled 2. disabled(2) - The fourth tone section is disabled
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

hwadsl2ChConfProfMinProtectionDsCfg		1.3.6.1.4.1.2011.6.31.1.13.1.14
If retransmission is not used in downstream direction,this parameter is minimum impulse noise protection on downstream direction. The minimum impulse noise protection for the bearer channel, expressed in symbols. The parameter can take the following values: noProtection(0), halfSymbol(1), singleSymbol(2), twoSymbols(4), threeSymbols(6), fourSymbols(8), fiveSymbols(10), sixSymbols(12), sevenSymbols(14), eightSymbols(16), nineSymbols(18), tenSymbols(20), elevenSymbols(22), twelveSymbols(24), thirteenSymbols(26), fourteenSymbols(28), fifteenSymbols(30), sixteenSymbols(32), null(65535) The value multiply 1/2 is the real value of Noise Protection values.
Status: current	Access: read-write
OBJECT-TYPE
	HWADSLSYMBOLPROTECTION

hwadsl2ChConfProfMinProtectionUsCfg		1.3.6.1.4.1.2011.6.31.1.13.1.15
If retransmission is not used in upstream direction,this parameter is minimum impulse noise protection on upstream direction. The minimum impulse noise protection for the bearer channel, expressed in symbols. The parameter can take the following values: noProtection(0), halfSymbol(1), singleSymbol(2), twoSymbols(4), threeSymbols(6), fourSymbols(8), fiveSymbols(10), sixSymbols(12), sevenSymbols(14), eightSymbols(16), nineSymbols(18), tenSymbols(20), elevenSymbols(22), twelveSymbols(24), thirteenSymbols(26), fourteenSymbols(28), fifteenSymbols(30), sixteenSymbols(32), null(65535) The value multiply 1/2 is the real value of Noise Protection values.
Status: current	Access: read-write
OBJECT-TYPE
	HWADSLSYMBOLPROTECTION

hwAdslExtDsMinTrainSnrMgnCfg		1.3.6.1.4.1.2011.6.31.1.13.1.16
Maximum Trainning Margin in downstream. Range: 0-310 Default: 30 Unit: tenth dB
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..310

hwAdslExtUsMinTrainSnrMgnCfg		1.3.6.1.4.1.2011.6.31.1.13.1.17
Maximum Trainning Margin in upstream. Range: 0-310 Default: 30 Unit: tenth dB
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..310

hwAdslExtDsMaxPsdCfg		1.3.6.1.4.1.2011.6.31.1.13.1.18
Maximum PSD margin in downstream.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	-60..-30

hwadsl2TSSiPsdMaskDsCfg		1.3.6.1.4.1.2011.6.31.1.13.1.19
The downstream PSD mask applicable at the U-C2 reference point. This parameter is used only for G992.3 or G992.5 and it may impose PSD restrictions (breakpoints) in addition to the Limit PSD mask defined in G992.5. This is a string of 32 pairs of values in the following structure: Octets 0-1 - Index of 1st sub-carrier used in the context of a first breakpoint. Octet 2 - The PSD reduction for the sub-carrier indicated in octets 0 and 1. Octets 3-5 - Same, for a 2nd breakpoint. Octets 6-8 - Same, for a 3rd breakpoint. This architecture continues until octets 94-95, which are associated with a 32nd breakpoint. Each subcarrier index is an unsigned number in the range 1 and NSCds. Each PSD reduction value is in the range 0 (0dBm/Hz) to 255 (-127.5dBm/Hz) with steps of 0.5dBm/Hz. Valid values are in the range 0 to 190 (0 to -95dBm/Hz). When the number of breakpoints is less than 32, all remaining octets are set to the value 0. Note that the content of this object should be correlated with the sub-carriers mask and with the RFI setup.
Status: current	Access: read-write
OBJECT-TYPE
	Adsl2PsdMaskDs

hwadsl2TranMissionStardardMaskCfg		1.3.6.1.4.1.2011.6.31.1.13.1.20
The transmission stardard mask . The Mask bit and the corresponding Transmission Standard: 0x 1 1 1 1 1 1 ETSI T1.413 G992.5 G992.3 G992.2 G992.1 The Default BitMask: 0X0.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

hwadsl2TransMissionAnnexMaskCfg		1.3.6.1.4.1.2011.6.31.1.13.1.21
The transMission annex Mask. The Mask bit and the corresponding Transmission Annex: 0x 1 1 1 1 1 Annex .J Annex .M Annex .L Annex .B Annex .A The Default BitMask: 0X0.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

hwadsl2TransMissionAnnexMScopeCfg		1.3.6.1.4.1.2011.6.31.1.13.1.22
Annex M expand scope: 1-Tone Index(7~32) 2-Tone Index(7~36) 3-Tone Index(7~40) 4-Tone Index(7~44) 5-Tone Index(7~48) 6-Tone Index(7~52) 7-Tone Index(7~56) 8-Tone Index(7~60) 9-Tone Index(7~64) -1-invalidValue
Status: current	Access: read-create
OBJECT-TYPE
	HWADSL2ANNEXMSCOPE

hwadsl2L2ModeStateCfg		1.3.6.1.4.1.2011.6.31.1.13.1.23
The state of L2 power management mode. Options: 1. disabled(1) - The L2 power management mode is disabled 2. enabled(2) - The L2 power management mode is enabled 3. forced(3) - The L2 power management mode is forced Default: disabled(1)
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	disabled(1), enabled(2), forced(3)

hwadsl2L2ModeMinDataRateCfg		1.3.6.1.4.1.2011.6.31.1.13.1.24
Minimum data rate in L2 mode. Range: 128-16384 Default: 256 Unit: Kbps
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	128..16384

hwadsl2L2ModeMaxDataRateCfg		1.3.6.1.4.1.2011.6.31.1.13.1.25
Maximum data rate in L2 mode. Range: 128-16384 Default: 1024 Unit: Kbps
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	128..16384

hwadsl2L2ModePayloadRateThresholdCfg		1.3.6.1.4.1.2011.6.31.1.13.1.26
Threshold for the Payload Rate Ratio. Range: 128-16384 Default: 128 Unit: Kbps
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	128..16384

hwadsl2L2ModeGuardTimeCfg		1.3.6.1.4.1.2011.6.31.1.13.1.27
Guard time before entering L2 mode. Range: 0-1024 Default: 60 Unit: seconds
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..1024

hwadsl2L2ModeIntervalTimeCfg		1.3.6.1.4.1.2011.6.31.1.13.1.28
The minimum interval between two records of L2 mode. Range: 0-255 Default: 255 Unit: seconds
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..255

hwadsl2L2ModeIntervalPowerValueCfg		1.3.6.1.4.1.2011.6.31.1.13.1.29
Maximum aggregate transmit power reduction per L2 request or L2 power trim. Range: 0-31 Default: 3 Unit: db
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..31

hwadsl2L2ModeTotalPowerValueCfg		1.3.6.1.4.1.2011.6.31.1.13.1.30
Total maximum aggregate transmit power reduction in L2. Range: 0-31 Default: 9 Unit: db
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..31

hwadslExtUsPhyRcontrolCfg		1.3.6.1.4.1.2011.6.31.1.13.1.31
To enable or disable the PHY-R function on upstream direction. Options: 1. enable(1) - The PHY-R function on upstream direction is enabled 2. disable(2) - The PHY-R function on upstream direction is disabled Default: disable(2)
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

hwadslExtUsINPmaxCfg		1.3.6.1.4.1.2011.6.31.1.13.1.32
Maximum Impulse Noise Protection on upstream direction. The parameter can take the following values: noProtection(1), halfSymbol(2), singleSymbol(3), twoSymbols(4), threeSymbols(5), fourSymbols(6), fiveSymbols(7), sixSymbols(8), sevenSymbols(9), eightSymbols(10), nineSymbols(11), tenSymbols(12), elevenSymbols(13), twelveSymbols(14), thirteenSymbols(15), fourteenSymbols(16), fifteenSymbols(17), sixteenSymbols(18) The value multiply 1/2 is the real value of Noise Protection values. Default: 1 Unit: DMT Symbol
Status: current	Access: read-write
OBJECT-TYPE
	Adsl2SymbolProtection

hwadslExtUsMinRtxRatioCfg		1.3.6.1.4.1.2011.6.31.1.13.1.33
Minimum rtx ratio on upstream direction. Range: 0-255 Default: 0 Unit: 1/256
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	0..255

hwadslExtUsMinRSoverheadCfg		1.3.6.1.4.1.2011.6.31.1.13.1.34
The minimum value of R/N on upstream direction. Range: 0-128 Default: 0 Unit: 1/256
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	0..128

hwadslExtDsPhyRcontrolCfg		1.3.6.1.4.1.2011.6.31.1.13.1.35
To enable or disable the PHY-R function on downstream direction. Options: 1. enable(1) - The PHY-R function on downstream direction is enabled 2. disable(2) - The PHY-R function on downstream direction is disabled Default: disable(2)
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

hwadslExtDsINPmaxCfg		1.3.6.1.4.1.2011.6.31.1.13.1.36
Maximum Impulse Noise Protection on downstream direction. The parameter can take the following values: noProtection(1), halfSymbol(2), singleSymbol(3), twoSymbols(4), threeSymbols(5), fourSymbols(6), fiveSymbols(7), sixSymbols(8), sevenSymbols(9), eightSymbols(10), nineSymbols(11), tenSymbols(12), elevenSymbols(13), twelveSymbols(14), thirteenSymbols(15), fourteenSymbols(16), fifteenSymbols(17), sixteenSymbols(18) The value multiply 1/2 is the real value of Noise Protection values. Default: 1 Unit: DMT Symbol
Status: current	Access: read-write
OBJECT-TYPE
	Adsl2SymbolProtection

hwadslExtDsMinRtxRatioCfg		1.3.6.1.4.1.2011.6.31.1.13.1.37
Minimum rtx ratio on downstream direction. Range: 0-255 Default: 0 Unit: 1/256
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	0..255

hwadslExtDsMinRSoverheadCfg		1.3.6.1.4.1.2011.6.31.1.13.1.38
The minimum value of R/N on downstream direction. Range: 0-128 Default: 0 Unit: 1/256
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	0..128

hwadsl2TSSiPsdMaskUsCfg		1.3.6.1.4.1.2011.6.31.1.13.1.39
The upstream PSD mask applicable at the U-C2 reference point. This parameter is used only for G992.3 or G992.5 and it may impose PSD restrictions (breakpoints) in addition to the Limit PSD mask defined in G992.5. This is a string of 32 pairs of values in the following structure: Octets 0+1 - Index of 1st sub-carrier used in the context of a first breakpoint. Octet 2 - The PSD reduction for the sub-carrier indicated in octets 0 and 1. Octets 3-5 - Same, for a 2nd breakpoint. Octets 6-8 - Same, for a 3rd breakpoint. This architecture continues until octets 9-11, which are associated with a fourth breakpoint. Each subcarrier index is an unsigned number in the range 1 and NSCus. Each PSD reduction value is in the range 0 (0dBm/Hz) to 255 (-127.5dBm/Hz) with steps of 0.5dBm/Hz. Valid values are in the range 0 to 190 (0 to -95dBm/Hz). When the number of breakpoints is less than 4, all remaining octets are set to the value 0. Note that the content of this object should be correlated with the sub-carriers mask and with the RFI setup.
Status: current	Access: read-write
OBJECT-TYPE
	Adsl2PsdMaskUs

hwadslLConfProfAdslModeCfg		1.3.6.1.4.1.2011.6.31.1.13.1.40
The ADSL2 management model specified includes an ADSL Mode attribute which identifies an instance of ADSL Mode-Specific PSD Configuration object in the ADSL Line Profile. The following classes of ADSL operating mode are defined. Options: 1. defMode(1) - ADSL transmit mode is defMode 2. adsl(2) - ADSL transmit mode is adsl 3. adsl2Pots(3) - ADSL transmit mode is adsl2Pots 4. adsl2Isdn(4) - ADSL transmit mode is adsl2Isdn 5. adsl2PlusPots(5) - ADSL transmit mode is adsl2PlusPots 6. adsl2PlusIsdn(6) - ADSL transmit mode is adsl2PlusIsdn 7. adsl2ReachExtended(7) - ADSL transmit mode is adsl2ReachExtended 8. invalidValue(-1) - Invalid value
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	defMode(1), adsl(2), adsl2Pots(3), adsl2Isdn(4), adsl2PlusPots(5), adsl2PlusIsdn(6), adsl2ReachExtended(7), invalidValue(-1)

hwadslLineExtConfProfileRowStatusCfg		1.3.6.1.4.1.2011.6.31.1.13.1.41
This object is used to create a new row or modify or delete an existing row in this table. A profile activated by setting this object to 'active'. When 'active' is set, the system will validate the profile. Before a profile can be deleted or taken out of service, (by setting this object to 'destroy' or 'outOfService') it must be first unreferenced from all associated lines. If the implementator of this MIB has chosen not to implement 'dynamic assignment' of profiles, this object's MIN-ACCESS is read-only and its value is always to be 'active'.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

hwadsl2L2ModeL2TimeCfg		1.3.6.1.4.1.2011.6.31.1.13.1.42
This minimum time (in seconds) between an entry into the L2 state and the first power trim in the L2 state and between two consecutive power trims in the L2 State. It ranges from 0 to 255 seconds. Range: 0-255 Default: 30 Unit: seconds
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..255

hwadslLineExtConfProfRtxModeDs		1.3.6.1.4.1.2011.6.31.1.13.1.43
The mode of operation of G.998.4 retransmission in downstream direction. Options: 1. forbidden(0) - G.998.4 retransmission not allowed. 2. preferred(1) - G.998.4 retransmission is preferred. 3. forced(2) - Force the use of the G.998.4 retransmission. 4. testmode(3) - Force the use of the G.998.4 retransmission in test mode.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	forbidden(0), preferred(1), forced(2), testmode(3)

hwadslLineExtConfProfLeftrThreshDs		1.3.6.1.4.1.2011.6.31.1.13.1.44
If retransmission is used in downstream direction, this parameter specifies the threshold for declaring a near-end leftr defect. The value is coded as a fraction of the NDR with valid range from 0.01 to 0.99 with increments of 0.01. A special value means the ETR shall be used as the default threshold for declaring a leftr defect.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..99

hwadslLineExtConfProfMinEtrRtxDs		1.3.6.1.4.1.2011.6.31.1.13.1.45
If retransmission is used in downstream direction, this parameter specifies the minimum expected throughput for the bearer channel.The values range in steps of 1000 bit/s.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	32000..32000000

hwadslLineExtConfProfMaxEtrRtxDs		1.3.6.1.4.1.2011.6.31.1.13.1.46
If retransmission is used in downstream direction, this parameter specifies the maxmum expected throughput for the bearer channel.The values range in steps of 1000 bit/s.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	32000..32000000

hwadslLineExtConfProfMaxNdrRtxDs		1.3.6.1.4.1.2011.6.31.1.13.1.47
If retransmission is used in downstream direction, this parameter specifies the maximum net data rate for the bearer channel. The values range in steps of 1000 bit/s.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	32000..32000000

hwadslLineExtConfProfMaxDelayRtxDs		1.3.6.1.4.1.2011.6.31.1.13.1.48
If retransmission is used in downstream direction, this parameter specifies the maximum for the instantaneous delay due to the effect of retransmission only (see G.998.4 for detailed specification). The delay ranges from 1 to 63 ms by steps of 1 ms. Unit: milliseconds
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	1..63

hwadslLineExtConfProfMinDelayRtxDs		1.3.6.1.4.1.2011.6.31.1.13.1.49
If retransmission is used in downstream direction, this parameter specifies the minimum for the instantaneous delay due to the effect of retransmission only (see G.998.4 for detailed specification). The delay ranges from 0 to 63 ms by steps of 1 ms. Unit: milliseconds
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..63

hwadslLineExtConfProfMinInpShineRtxDs		1.3.6.1.4.1.2011.6.31.1.13.1.50
If retransmission is used in downstream direction, this parameter specifies the minimum impulse noise protection against SHINE for the bearer channel if it is transported over DMT symbols with a subcarrier spacing of 4.3125 kHz. The impulse noise protection is expressed in DMT symbols with a subcarrier spacing of 4.3125 kHz and can take any integer value from 0 to 63, inclusive. Unit: symbols
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..63

hwadslLineExtConfProfShineRatioRtxDs		1.3.6.1.4.1.2011.6.31.1.13.1.51
If retransmission is used in downstream direction, this parameter specifies the SHINE ratio (detailed definition see G.998.4). The values range from 0 to 0.100 in increments of 0.001.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..100

hwadslLineExtConfProfMinInpReinRtxDs		1.3.6.1.4.1.2011.6.31.1.13.1.52
If retransmission is used in downstream direction, this parameter specifies the minimum impulse noise protection against REIN for the bearer channel if it is transported over DMT symbols with a subcarrier spacing of 4.3125 kHz. The impulse noise protection is expressed in DMT symbols with a subcarrier spacing of 4.3125 kHz and can take any integer value from 0 to 7, inclusive.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..7

hwadslLineExtConfProfIatReinRtxDs		1.3.6.1.4.1.2011.6.31.1.13.1.53
If retransmission is used in downstream direction, this parameter specifies the inter-arrival time that shall be assumed for REIN protection. Options: 1. frequency100Hz(0) - an inter-arrival time derived from a REIN at 100 Hz 2. frequency120Hz(1) - an inter-arrival time derived from a REIN at 120 Hz
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	frequency100Hz(0), frequency120Hz(1)

hwadsl2LExtLineProfReferenceClock		1.3.6.1.4.1.2011.6.31.1.13.1.54
This object configures the clock reference for the ATU-C in an ADSL line. Represented as an enumeration. Options: 1. freeRun(1) - Indicates the local clock 2. system(2) - Indicates the system clock
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	freeRun(1), system(2)

hwadsl2LExtLineProfRfiBands		1.3.6.1.4.1.2011.6.31.1.13.1.55
The RFI notch parameter. It is a string consist of begin tone index, end tone index. This is a string of 4 groups of values in the following structure: Octets 0+1 - Index of start sub-carrier used in the context of a first group Octets 2+3 - Index of end sub-carrier used in the context of a first group Octets 4-7 - Same, for a 2nd group This architecture continues until octets 12-15, which are associated with a 4th group.It can contain as most as 4 groups.
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(0..16)

hwadsl2LExtLineProfDpboEPsd		1.3.6.1.4.1.2011.6.31.1.13.1.56
This parameter defines the PSD mask that is assumed to be permitted at the exchange. This parameter shall use the same format as PSDMASKds.The maximum number of breakpoints for DPBOEPSD is 16. This is a string of 16 pairs of values in the following structure: Octets 0+1 - Index of 1st sub-carrier used in the context of a first breakpoint. Octet 2 - The PSD reduction for the sub-carrier indicated in octets 0 and 1 Octets 3-5 - Same, for a 2nd breakpoint Octets 6-8 - Same, for a 3rd breakpoint This architecture continues until octets 45-47, which are associated with a 16th breakpoint. Each subcarrier index is an unsigned number in the range 1 and NSCds. Each PSD reduction value is in the range 0 (0dBm/Hz) to 255 (-127.5dBm/Hz) with steps of 0.5dBm/Hz. Valid values are in the range 0 to 190 (0 to -95dBm/Hz). When the number of breakpoints is less than 16, all remaining octets are set to the value 0xff.
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(0..48)

hwadsl2LExtLineProfDpboEsEL		1.3.6.1.4.1.2011.6.31.1.13.1.57
This configuration parameter defines the assumed electrical length of cables (E-side cables) connecting exchange based DSL services to a remote flexibility point (cabinet), that hosts the xTU-C that is subject to spectrally shaped downstream power back-off depending on this length. For this parameter the electrical length is defined as the loss (in dB) of an equivalent length of hypothetical cable at a reference frequency defined by the network operator or in spectrum management regulations. DPBOESEL shall be coded as an unsigned integer representing an electrical length from 0 dB (coded as 0) to 255.5 dB (coded as 511) in steps of 0.5 dB. All values in the range are valid.If DPBOESEL is set to zero, the DPBO in this section shall be disabled.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..511

hwadsl2LExtLineProfDpboEselMin		1.3.6.1.4.1.2011.6.31.1.13.1.58
DPBOESELMIN in dB is the minimum of all main cable losses for the KVz supplied when using the SOL model (expansion of a KVz and ADSL2 provision of additional KVz areas from this KVz using cross-cables to additional KVz), including the KVz at the MSAN site. This value must be adjustable as the minimum requirement via the SNMP interface in the configuration profile for each ADSL2 port, and is set individually for each MSAN site and usage. As an option, adjustment can be done for each MSAN or line card, thus taking effect for entire port groups. It is used only for determining the MUF.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..511

hwadsl2LExtLineProfDpboEsCableModelA		1.3.6.1.4.1.2011.6.31.1.13.1.59
This configuration parameter defines a cable model in terms of three scalars DPBOESCMA, DPBOESCMB and DPBOESCMC that shall be used to describe the frequency dependent loss of E-side cables.Parameters DPBOESCMA, DPBOESCMB, DPBOESCMC shall be coded as unsigned integers representing a scalar value from -1 (coded as 0) to 1.5 (coded as 640) in step of 1/256. All values in the range are valid.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..640

hwadsl2LExtLineProfDpboEsCableModelB		1.3.6.1.4.1.2011.6.31.1.13.1.60
This configuration parameter defines a cable model in terms of three scalars DPBOESCMA, DPBOESCMB and DPBOESCMC that shall be used to describe the frequency dependent loss of E-side cables.Parameters DPBOESCMA, DPBOESCMB, DPBOESCMC shall be coded as unsigned integers representing a scalar value from -1 (coded as 0) to 1.5 (coded as 640) in step of 1/256. All values in the range are valid.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..640

hwadsl2LExtLineProfDpboEsCableModelC		1.3.6.1.4.1.2011.6.31.1.13.1.61
This configuration parameter defines a cable model in terms of three scalars DPBOESCMA, DPBOESCMB and DPBOESCMC that shall be used to describe the frequency dependent loss of E-side cables.Parameters DPBOESCMA, DPBOESCMB, DPBOESCMC shall be coded as unsigned integers representing a scalar value from -1 (coded as 0) to 1.5 (coded as 640) in step of 1/256. All values in the range are valid.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..640

hwadsl2LExtLineProfDpboMus		1.3.6.1.4.1.2011.6.31.1.13.1.62
DPBOMUS defines the assumed minimum usable receive signal PSD (in dBm/Hz) for exchange based services, used to modify parameter DPBOFMAX defined below. It shall be coded as an unsigned integer representing a PSD level from 0 dBm/Hz (coded as 0) to -127.5 dBm/Hz (coded as 255) in steps of 0.5 dBm/Hz. All values in the range are valid.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..255

hwadsl2LExtLineProfDpboFMin		1.3.6.1.4.1.2011.6.31.1.13.1.63
DPBOFMIN defines the minimum frequency from which the DPBO shall be applied. It shall be coded as a 16 bits unsigned integer representing a frequency in multiple of 4.3125 KHz. The range of valid values is from 0 kHz (coded as 0) to 2203.6875 kHz (coded as 511).
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..511

hwadsl2LExtLineProfDpboFMax		1.3.6.1.4.1.2011.6.31.1.13.1.64
DPBOFMAX defines the maximum frequency at which DPBO may be applied. It shall be coded as a 16 bits unsigned integer representing a frequency in multiple of 4.3125 KHz. The range of valid values is from 138 kHz (coded as 32) to 2203.6875 kHz (coded as 511).
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	32..511

hwadsl2LExtLineProfMaxNomPsdUs		1.3.6.1.4.1.2011.6.31.1.13.1.65
Maximum PSD margin in upstream.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	-60..-30

hwadsl2LExtLineProfMaxNomAtpDs		1.3.6.1.4.1.2011.6.31.1.13.1.66
The maximum nominal aggregate transmit power in the downstream direction during initialization and showtime. It ranges from 0 to 255 units of 0.1 dBm (physical values are 0 to 25.5 dBm).
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..255

hwadsl2LExtLineProfMaxNomAtpUs		1.3.6.1.4.1.2011.6.31.1.13.1.67
The maximum nominal aggregate transmit power in the upstream direction during initialization and showtime. It ranges from 0 to 255 units of 0.1 dBm (physical values are 0 to 25.5 dBm).
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..255

hwadsl2LExtLineProfInmIatoDs		1.3.6.1.4.1.2011.6.31.1.13.1.68
The parameter of downstream impulse noise monitoring inter arrival time offset. This is the inter arrival time offset that the xTU receiver shall use to determine in which bin of the inter arrival time histogram the IAT is reported. The valid values for INMIATO ranges from 3 to 511 DMT symbols in steps of 1 DMT symbol.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	3..511

hwadsl2LExtLineProfInmIatsDs		1.3.6.1.4.1.2011.6.31.1.13.1.69
The parameter of downstream impulse noise monitoring inter arrival time step. This is the inter arrival time step that the xTU receiver shall use to determine in which bin of the inter arrival time histogram the IAT is reported. The valid values for INMIATS ranges from 0 to 7 in steps of 1.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..7

hwadsl2LExtLineProfInmCcDs		1.3.6.1.4.1.2011.6.31.1.13.1.70
The parameter of downstream impulse noise monitoring cluster continuation value. This is the cluster continuation value that the xTU receiver shall use in the cluster indication process described in the relevant ITU-T Recommendation. The valid values for INMCC range from 0 to 64 DMT symbols in steps of 1 DMT symbol.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..64

hwadsl2LExtLineProfInmInpeqModeDs		1.3.6.1.4.1.2011.6.31.1.13.1.71
The parameter of downstream impulse noise monitoring equivalent impulse noise protect mode. This is the INM Equivalent INP Mode that the xTU receiver shall use in the computation of the Equivalent INP, as defined in the relevant ITU-T Recommendation. The valid values for INM_INPEQ_MODE are 0, 1, 2, 3, and 4.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..4

hwadsl2LExtLineProfForceInpDs		1.3.6.1.4.1.2011.6.31.1.13.1.72
The parameter indicates that the framer settings of the upstream bearer shall be selected such that the impulse noise protection computed according to the formula specified in the relevant recommendation is greater than or equal to the minimal impulse noise protection requirement. This flag shall have the same value for all the bearers of one line in the same direction.
Status: current	Access: read-create
OBJECT-TYPE
	TruthValue

hwadsl2LExtLineProfForceInpUs		1.3.6.1.4.1.2011.6.31.1.13.1.73
The parameter indicates that the framer settings of the upstream bearer shall be selected such that the impulse noise protection computed according to the formula specified in the relevant recommendation is greater than or equal to the minimal impulse noise protection requirement. This flag shall have the same value for all the bearers of one line in the same direction.
Status: current	Access: read-create
OBJECT-TYPE
	TruthValue

hwadsl2LExtLineProfInitPolicy		1.3.6.1.4.1.2011.6.31.1.13.1.74
If retransmission is not used in a given transmit direction, this parameter indicates which policy shall be applied to determine the transceiver configuration parameters at initialization. The valid values for CIPOLICY are 0,1 and 2. Those policies are defined in the respective recommendations. Options: 1. policy0 (1) - Policy 0 according to the applicable standard 2. policy1 (2) - Policy 1 according to the applicable standard 3. policy2 (3) - Policy 2 according to the applicable standard
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	policy0(1), policy1(2), policy2(3)

hwadsl2LExtLineProfL3Time		1.3.6.1.4.1.2011.6.31.1.13.1.75
This minimum time (in seconds) between an entry into the L3 state and the L0 or L2 state.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..65535

hwadsl2LExtLineProfL3ModeState		1.3.6.1.4.1.2011.6.31.1.13.1.76
Power management state enabling. The state of L3 power management mode. Options: 1. enabled(1) - The L3 power management mode is enabled 2. disabled(2) - The L3 power management mode is disabled
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

hwAdslLineLatestActParaInfoTable		1.3.6.1.4.1.2011.6.31.1.14
This table provides one row for each ADSL port. Each row contains the latest actived parameters. The index of this table is ifIndex.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HwAdslLineLatestActParaInfoEntry

hwAdslLineLatestActParaInfoEntry		1.3.6.1.4.1.2011.6.31.1.14.1
This table provides one row for each ADSL port. Each row contains the latest actived parameters. The index of this entry is ifIndex.
Status: current	Access: not-accessible
OBJECT-TYPE
	HwAdslLineLatestActParaInfoEntry

hwAdslLineLatestActiveTimeInfo		1.3.6.1.4.1.2011.6.31.1.14.1.1
Actual time when latest actived.
Status: current	Access: read-only
OBJECT-TYPE
	DateAndTime

hwAdslLineLatestDeactiveTimeInfo		1.3.6.1.4.1.2011.6.31.1.14.1.2
Actual time when latest deactived. If port is actived, the value is invalid.
Status: current	Access: read-only
OBJECT-TYPE
	DateAndTime

hwAdslAtucLatestTxRateInfo		1.3.6.1.4.1.2011.6.31.1.14.1.3
Actual transmit rate on this channel when latest actived. Unit: bps
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

hwAdslAturLatestTxRateInfo		1.3.6.1.4.1.2011.6.31.1.14.1.4
Actual transmit rate on this channel when latest actived. Unit: bps
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

hwAdslAtucLatestSnrMgnInfo		1.3.6.1.4.1.2011.6.31.1.14.1.5
Noise Margin as seen by this ATU-C at the time of the last adslAtucRateChangeTrap event. Unit: tenth dB.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hwAdslAturLatestSnrMgnInfo		1.3.6.1.4.1.2011.6.31.1.14.1.6
Noise Margin as seen by this ATU-R at the time of the last adslAtucRateChangeTrap event. Unit: tenth dB.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hwAdslAtucLatestAtnInfo		1.3.6.1.4.1.2011.6.31.1.14.1.7
Measured difference in the total power transmitted as seen by this ATU-C at the time of the last adslAtucRateChangeTrap event. Unit: tenth dB.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

hwAdslAturLatestAtnInfo		1.3.6.1.4.1.2011.6.31.1.14.1.8
Measured difference in the total power transmitted as seen by this ATU-R at the time of the last adslAtucRateChangeTrap event. Unit: tenth dB.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

hwAdslAtucLatestAttainableRateInfo		1.3.6.1.4.1.2011.6.31.1.14.1.9
Indicates the maximum attainable data rate by the ATU-C at the time of the last adslAtucRateChangeTrap event. Unit: bps
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

hwAdslAturLatestAttainableRateInfo		1.3.6.1.4.1.2011.6.31.1.14.1.10
Indicates the maximum attainable data rate by the ATU-R at the time of the last adslAtucRateChangeTrap event. Unit: bps
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

hwAdslAtucLatestConfTxRateInfo		1.3.6.1.4.1.2011.6.31.1.14.1.11
Configured transmit rate for ADSL port. See adslAtucConfRateChanRatio for information regarding RADSL mode and ATUR transmit rate for ATUC receive rates. Unit: bps.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

hwAdslAturLatestConfTxRateInfo		1.3.6.1.4.1.2011.6.31.1.14.1.12
Configured receive rate for ADSL port. See adslAtucConfRateChanRatio for information regarding RADSL mode and ATUR transmit rate for ATUC receive rates. Unit: bps.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

hwAdslAtucLatestInterleaveDelayInfo		1.3.6.1.4.1.2011.6.31.1.14.1.13
Interleave delay for this channel when latest actived. Unit: milliseconds
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

hwAdslAturLatestInterleaveDelayInfo		1.3.6.1.4.1.2011.6.31.1.14.1.14
Interleave delay for this channel when latest actived. Unit: milliseconds
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

hwAdslAtucLatestTargetSnrMgnInfo		1.3.6.1.4.1.2011.6.31.1.14.1.15
Port Signal/Noise Margin. Range: 0-310 Unit: tenth dB
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	0..310

hwAdslAturLatestTargetSnrMgnInfo		1.3.6.1.4.1.2011.6.31.1.14.1.16
Port Signal/Noise Margin. Range: 0-310 Unit: tenth dB
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	0..310

hwAdslAtucLatestTxRateThresholdInfo		1.3.6.1.4.1.2011.6.31.1.14.1.17
Port down stream threshold. Unit: bps
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

hwAdslAturLatestTxRateThresholdInfo		1.3.6.1.4.1.2011.6.31.1.14.1.18
Port up stream threshold. Unit: bps
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

hwXdslPortPerformanceStatInfoTable		1.3.6.1.4.1.2011.6.31.1.15
XDSL port performance staticstic table. The indexes of this table are ifIndex and hwXdslPort15minutesPerformanceIntervalInfo.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HwXdslPortPerformanceStatInfoEntry

hwXdslPortPerformanceStatInfoEntry		1.3.6.1.4.1.2011.6.31.1.15.1
XDSL port performance staticstic table. The indexes of this entry are ifIndex and hwXdslPort15minutesPerformanceIntervalInfo.
Status: current	Access: not-accessible
OBJECT-TYPE
	HwXdslPortPerformanceStatInfoEntry

hwXdslPort15minutesPerformanceIntervalInfo		1.3.6.1.4.1.2011.6.31.1.15.1.1
The index of the interval which is queried. Range: 0-96
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	0..96

hwXdslPort15minutesPerformanceInBytesInfo		1.3.6.1.4.1.2011.6.31.1.15.1.2
Read the receive bytes of xDSL port during 15 minutes.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwXdslPort15minutesPerformanceOutBytesInfo		1.3.6.1.4.1.2011.6.31.1.15.1.3
Read the transmit bytes of xDSL port during 15 minutes.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwXdslPortSyncSuccNumberInfo		1.3.6.1.4.1.2011.6.31.1.15.1.4
Number of successful activations of the ADSL/G.SHDSL port within 15 minutes
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwXdslPortSyncFailNumberInfo		1.3.6.1.4.1.2011.6.31.1.15.1.5
Number of failed activations of the ADSL/G.SHDSL port within 15 minutes
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwXdslPortAtucCodeViolationInfo		1.3.6.1.4.1.2011.6.31.1.15.1.6
Number of head errors of the ATUC cell within 15 minutes.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwXdslPortAturCodeViolationInfo		1.3.6.1.4.1.2011.6.31.1.15.1.7
Number of head errors of the ATUR cell within 15 minutes.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwXdslPortAtucFecSecondsInfo		1.3.6.1.4.1.2011.6.31.1.15.1.8
Seconds of the ATUC FEC errors within 15 minutes.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwXdslPortAturFecSecondsInfo		1.3.6.1.4.1.2011.6.31.1.15.1.9
Seconds of the ATUR FEC errors within 15 minutes.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwXdslPortCurrent15minutesStatTimeInfo		1.3.6.1.4.1.2011.6.31.1.15.1.10
Read the Stat. time of current 15 minutes.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwadslAtucPhysInfoTable		1.3.6.1.4.1.2011.6.31.1.16
This table provides the physical layer parameters of each ATUC. The index of this table is ifIndex.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HwadslAtucPhysInfoEntry

hwadslAtucPhysInfoEntry		1.3.6.1.4.1.2011.6.31.1.16.1
This table provides the physical layer parameters of each ATUC. The index of this entry is ifIndex.
Status: current	Access: not-accessible
OBJECT-TYPE
	HwadslAtucPhysInfoEntry

hwAdslAtucCurrTransModeInfo		1.3.6.1.4.1.2011.6.31.1.16.1.1
A set of ADSL line transmission modes.
Status: current	Access: read-only
OBJECT-TYPE
	HWADSLTRANSMISSIONMODETYPE

hwAdslAtucCurrSignalAtnInfo		1.3.6.1.4.1.2011.6.31.1.16.1.2
Current signal attenuation of the ATU-C, indicating the difference between the transmit signal of the ATU-R and the receive signal of the ATU-C. Range: 0-630 Unit: tenth dB
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32	0..630

hwadslAtucInvG994VendorId		1.3.6.1.4.1.2011.6.31.1.16.1.3
The ATU G.994.1 Vendor ID as inserted in the G.994.1 CL/CLR message. It consists of 8 binary octets, including a country code followed by a (regionally allocated) provider code, as defined in Recommendation T.35.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..16)

hwadslAtucLInvSelfTestResult		1.3.6.1.4.1.2011.6.31.1.16.1.4
The ATU self-test result, coded as a 32-bit value. The most significant octet of the result is '0' if the self-test passed, and '1' if the self-test failed. The interpretation of the other octets is vendor discretionary.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

hwadslAtucTransmissionCapabilitiesInfo		1.3.6.1.4.1.2011.6.31.1.16.1.5
The ATU transmission system capability list of the different coding types. It is coded in a bit-map representation with 1 or more bits set. A bit set to '1' means that the ATU supports the respective coding. The value may be derived from the handshaking procedures defined in G.994.1.
Status: current	Access: read-only
OBJECT-TYPE
	Adsl2TransmissionModeType

hwadslLineExtInfoTable		1.3.6.1.4.1.2011.6.31.1.17
This table is an extension of RFC 2662. It contains ADSL line configuration and monitoring information. This includes the ADSL line's capabilities and actual ADSL transmission system. An entry extends the adslLineEntry defined in [RFC2662]. Each entry corresponds to an ADSL line. The index of this table is ifIndex.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HwadslLineExtInfoEntry

hwadslLineExtInfoEntry		1.3.6.1.4.1.2011.6.31.1.17.1
This table is an extension of RFC 2662. It contains ADSL line configuration and monitoring information. This includes the ADSL line's capabilities and actual ADSL transmission system. An entry extends the adslLineEntry defined in [RFC2662]. Each entry corresponds to an ADSL line. The index of this entry is ifIndex.
Status: current	Access: not-accessible
OBJECT-TYPE
	HwadslLineExtInfoEntry

hwadsl2LineTransAtucActualInfo		1.3.6.1.4.1.2011.6.31.1.17.1.1
The actual transmission mode of the ATU-C. During ADSL line initialization, the ADSL Transceiver Unit - Remote terminal end (ATU-R) will determine the mode used for the link. This value will be limited a single transmission mode that is a subset of those modes enabled by the ATU-C and denoted by adslLineTransAtucConfig. After an initialization has occurred, its mode is saved as the 'Current' mode and is persistence should the link go down. This object returns 0 (i.e. BITS with no mode bit set) if the mode is not known.
Status: current	Access: read-only
OBJECT-TYPE
	Adsl2TransmissionModeType

hwadslLineStatusRtxUsedDs		1.3.6.1.4.1.2011.6.31.1.17.1.2
This parameter specifies whether G.998.4 retransmission is used (i.e., active in Showtime) in a given transmit direction. The parameter in downstream is RTX_USED_ds, and the parameter in upstream is RTX_USED_us. In G.992.3 and G992.5 only the downstream parameter RTX_USED_ds is relevant, the value in the upstream direction shall be ignored. In G.993.2, both parameters are relevant. Options: 1. rtxInuse(1) - RTX in use 2. rtxUnusedModeForbidden(2) - RTX not in use, due to RTX_MODE = FORBIDDEN 3. rtxUnusedNotSupportedXtuc(3) - RTX not in use, due to not supported by the XTU-C 4. rtxUnusedNotSupportedXtur(4) - RTX not in use, due to not supported by the XTU-R 5. rtxUnusedNotSupportedXtucAndXtur(5) - RTX not in use, due to not supported by the XTU-C and XTU-R 6. invalidValue(-1) - Invalid value This parameter shall also be reported in the case of RTX_MODE=RTX_FORCED with INIT FAILURE or with RTX_MODE=RTX_TESTMODE with INIT FAILURE.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	rtxInuse(1), rtxUnusedModeForbidden(2), rtxUnusedNotSupportedXtuc(3), rtxUnusedNotSupportedXtur(4), rtxUnusedNotSupportedXtucAndXtur(5), invalidValue(-1)

hwadslLineStatusInitResult		1.3.6.1.4.1.2011.6.31.1.17.1.3
Indicates the result of the last full initialization performed on the line. Options: 1. noFail(0) - Successful initialization 2. configError(1) - Configuration failure 3. configNotFeasible(2) - Configuration details not supported 4. commFail(3) - Communication failure 5. noPeerXtu(4) - Peer xTU not detected 6. otherCause(5) - Other initialization failure reason 7. ginpNotSelected(6) - G.998.4 Retransmission mode was not selected while RTX_MODE = FORCED or with RTX_MODE = RTX_TESTMODE 8. invalidValue(-1) - Invalid value
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	noFail(0), configError(1), configNotFeasible(2), commFail(3), noPeerXtu(4), otherCause(5), ginpNotSelected(6), invalidValue(-1)

hwadslLineStatusSigAttenDs		1.3.6.1.4.1.2011.6.31.1.17.1.4
The measured difference in the total power transmitted by the ATU-C and the total power received by the ATU-R over all sub- carriers during Showtime. It ranges from 0 to 1270 units of 0.1 dB (physical values are 0 to 127 dB). A special value of 0x7FFFFFFF (2147483647) indicates the signal attenuation is out of range to be represented. A special value of 0x7FFFFFFE (2147483646) indicates the signal attenuation measurement is currently unavailable.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	0..1270 | 2147483646 | 2147483647

hwadslLineStatusSigAttenUs		1.3.6.1.4.1.2011.6.31.1.17.1.5
The measured difference in the total power transmitted by the ATU-R and the total power received by the ATU-C over all sub- carriers during Showtime. It ranges from 0 to 1270 units of 0.1 dB (physical values are 0 to 127 dB). A special value of 0x7FFFFFFF (2147483647) indicates the signal attenuation is out of range to be represented. A special value of 0x7FFFFFFE (2147483646) indicates the signal attenuation measurement is currently unavailable.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	0..1270 | 2147483646 | 2147483647

hwadslLineStatusActPsdDs		1.3.6.1.4.1.2011.6.31.1.17.1.6
Actual Power Spectrum Density (PSD) Downstream. The average downstream transmit PSD over the sub-carriers used for downstream. It ranges from -900 to 0 units of 0.1 dB (physical values are -90 to 0 dBm/Hz). A value of 0x7FFFFFFF (2147483647) indicates the measurement is out of range to be represented.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	-900..0 | 2147483647

hwadslLineStatusActPsdUs		1.3.6.1.4.1.2011.6.31.1.17.1.7
Actual Power Spectrum Density (PSD) Upstream. The average upstream transmit PSD over the sub-carriers used for upstream. It ranges from -900 to 0 units of 0.1 dB (physical values are -90 to 0 dBm/Hz). A value of 0x7FFFFFFF (2147483647) indicates the measurement is out of range to be represented.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	-900..0 | 2147483647

hwadslLineStatusLastRetrainInfo		1.3.6.1.4.1.2011.6.31.1.17.1.8
Indicates the last retrained information performed on the line. Options: 1. none(1) - No record is available 2. cpe-l3-trigger(2) - The terminal initiates a low power consumption L3 request 3. lom-us-trigger-dra(3) - The upstream noise margin is smaller than the minimum noise margin in rate dynamic adjustment 4. lom-ds-trigger-dra(4) - The downstream noise margin is smaller than the minimum noise margin in rate dynamic adjustment 5. cpe-never-answer-oam(5) - No OAM response is received from the CPE all the time 6. cpe-no-more-answer-oam(6) - No OAM response is received from the CPE 7. persistent-ncd-us(7) - Upstream continuous no cell delineation 8. persistent-ncd-ds(8) - Downstream continuous no cell delineation 9. persistent-lcd-us(9) - Upstream continuous loss of cell delineation 10.persistent-lcd-ds(10) - Downstream continuous loss of cell delineation 11.l2-problem-co-drop(11) - The CO is faulty during the switching from L0 to L2 12.l2-problem-cpe-drop(12) - The CPE is faulty during the switching from L0 to L2 13.bitswap-refused-us-co-drop(13) - The CO goes offline when the upstream bit swap fault occurs 10 times consecutively 14.bitswap-refused-us-cpe-drop(14) - The CPE goes offline when the downstream bit swap fault occurs 10 times consecutively 15.channel-change-us-co-drop(15) - The CO goes offline when the upstream net rate changes 16.channel-change-us-cpe-drop(16) - The CPE goes offline when the upstream net rate changes 17.noise-increase-us-co-drop(17) - The CO goes offline when the upstream noise increases 18.noise-increase-us-cpe-drop(18) - The CPE goes offline when the upstream noise increases 19.bitswap-refused-ds-co-drop(19) - The CO goes offline when the downstream bit swap fault occurs 10 times consecutively 20.bitswap-refused-ds-cpe-drop(20) - The CPE goes offline when the downstream bit swap fault occurs 10 times consecutively 21.channel-change-ds-co-drop(21) - The CO goes offline when the downstream net rate changes 22.channel-change-ds-cpe-drop(22) - The CPE goes offline when the downstream net rate changes 23.noise-increase-ds-co-drop(23) - The CO goes offline when the downstream noise increases 24.noise-increase-ds-cpe-drop(24) - The CPE goes offline when the downstream noise increases 25.lom-us-co-drop(25) - The CO goes offline when the upstream noise margin is smaller than the minimum noise margin 26.lom-us-cpe-drop(26) - The CPE goes offline when the upstream noise margin is smaller than the minimum noise margin 27.lom-ds-co-drop(27) - The CO goes offline when the downstream noise margin is smaller than the minimum noise margin 28.lom-ds-cpe-drop(28) - The CPE goes offline when the downstream noise margin is smaller than the minimum noise margin 29.sra-problem-us-co-drop(29) - The CO goes offline when the upstream SRA is faulty 30.sra-problem-us-cpe-drop(30) - The CPE goes offline when the upstream SRA is faulty 31.sra-failed-us-co-drop(31) - The CO goes offline when the upstream SRA fails 32.sra-failed-us-cpe-drop(32) - The CPE goes offline when the upstream SRA fails 33.sra-problem-ds-co-drop(33) - The CO goes offline when the downstream SRA is fault 34.sra-problem-ds-cpe-drop(34) - The CPE goes offline when the downstream SRA is faulty 35.sra-rejected-ds-co-drop(35) - The CO goes offline when the downstream SRA is rejected 36.sra-rejected-ds-cpe-drop(36) - The CPE goes offline when the downstream SRA is rejected 37.bitswap-problem-us-co-drop(37) - The CO goes offline when the upstream bit swap is faulty 38.bitswap-problem-us-cpe-drop(38) - The CPE goes offline when the upstream bit swap is faulty 39.bitswap-failed-us-co-drop(39) - The CO goes offline when the upstream bit swap fails 40.bitswap-failed-us-cpe-drop(40) - The CPE goes offline when the upstream bit swap fails 41.bitswap-problem-ds-co-drop(41) - The CO goes offline when the downstream bit swap is faulty 42.bitswap-problem-ds-cpe-drop(42) - The CPE goes offline when the downstream bit swap is faulty 43.bitswap-rejected-ds-co-drop(43) - The CO goes offline when the downstream bit swap is rejected 44.bitswap-rejected-ds-cpe-drop(44) - The CPE goes offline when the downstream bit swap is rejected 45.cpe-switched-off(45) - The CPE power supply is shut down 46.cpe-lost(46) - The CPE is disconnected 47.co-reset(47) - The CO resets the chipset or line 48.co-stop(48) - The CO actively deactivate the port 49.unknown(49) - Unknown reason
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	none(1), cpe-l3-trigger(2), lom-us-trigger-dra(3), lom-ds-trigger-dra(4), cpe-never-answer-oam(5), cpe-no-more-answer-oam(6), persistent-ncd-us(7), persistent-ncd-ds(8), persistent-lcd-us(9), persistent-lcd-ds(10), l2-problem-co-drop(11), l2-problem-cpe-drop(12), bitswap-refused-us-co-drop(13), bitswap-refused-us-cpe-drop(14), channel-change-us-co-drop(15), channel-change-us-cpe-drop(16), noise-increase-us-co-drop(17), noise-increase-us-cpe-drop(18), bitswap-refused-ds-co-drop(19), bitswap-refused-ds-cpe-drop(20), channel-change-ds-co-drop(21), channel-change-ds-cpe-drop(22), noise-increase-ds-co-drop(23), noise-increase-ds-cpe-drop(24), lom-us-co-drop(25), lom-us-cpe-drop(26), lom-ds-co-drop(27), lom-ds-cpe-drop(28), sra-problem-us-co-drop(29), sra-problem-us-cpe-drop(30), sra-failed-us-co-drop(31), sra-failed-us-cpe-drop(32), sra-problem-ds-co-drop(33), sra-problem-ds-cpe-drop(34), sra-rejected-ds-co-drop(35), sra-rejected-ds-cpe-drop(36), bitswap-problem-us-co-drop(37), bitswap-problem-us-cpe-drop(38), bitswap-failed-us-co-drop(39), bitswap-failed-us-cpe-drop(40), bitswap-problem-ds-co-drop(41), bitswap-problem-ds-cpe-drop(42), bitswap-rejected-ds-co-drop(43), bitswap-rejected-ds-cpe-drop(44), cpe-switched-off(45), cpe-lost(46), co-reset(47), co-stop(48), unknown(49)

hwadslLineStatusLineRateDs		1.3.6.1.4.1.2011.6.31.1.17.1.9
The actual line rate downstream. Unit: bits/second
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

hwadslLineStatusLineRateUs		1.3.6.1.4.1.2011.6.31.1.17.1.10
The actual line rate upstream. Unit: bits/second
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

hwadslAtucChanPerfDataInfoTable		1.3.6.1.4.1.2011.6.31.1.18
Parameter table of the ATUC channel performance: This table is used to query the performance statistics of the ATUC channel. The index of this table is ifIndex.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HwadslAtucChanPerfDataInfoEntry

hwadslAtucChanPerfDataInfoEntry		1.3.6.1.4.1.2011.6.31.1.18.1
Parameter table of the ATUC channel performance: This table is used to query the performance statistics of the ATUC channel. The index of this entry is ifIndex.
Status: current	Access: not-accessible
OBJECT-TYPE
	HwadslAtucChanPerfDataInfoEntry

hwadslAtucChanFecBlksInfo		1.3.6.1.4.1.2011.6.31.1.18.1.1
The count of all blocks received with FEC anomalies since agent reset.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwadslAtucChanHecBlksInfo		1.3.6.1.4.1.2011.6.31.1.18.1.2
The count of all blocks received with HEC anomalies since agent reset.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwadslAtucChanCrcBlksInfo		1.3.6.1.4.1.2011.6.31.1.18.1.3
The count of all blocks received with CRC anomalies since agent reset.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwadslAtucChanPerfCurr15MinFecBlksInfo		1.3.6.1.4.1.2011.6.31.1.18.1.4
The count of all blocks received with FEC anomalies on this channel within the current 15 minutes interval.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwadslAtucChanPerfCurr15MinHecBlksInfo		1.3.6.1.4.1.2011.6.31.1.18.1.5
The count of all blocks received with HEC anomalies on this channel within the current 15 minutes interval.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwadslAtucChanPerfCurr15MinCrcBlksInfo		1.3.6.1.4.1.2011.6.31.1.18.1.6
The count of all blocks received with CRC anomalies on this channel within the current 15 minutes interval.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwadslAtucChanPerfCurr1DayFecBlksInfo		1.3.6.1.4.1.2011.6.31.1.18.1.7
The count of all blocks received with FEC anomalies on this channel during the current day as measured by adslAtucChanPerfCurr1DayTimeElapsed.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwadslAtucChanPerfCurr1DayHecBlksInfo		1.3.6.1.4.1.2011.6.31.1.18.1.8
The count of all blocks received with HEC anomalies on this channel during the current day as measured by adslAtucChanPerfCurr1DayTimeElapsed.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwadslAtucChanPerfCurr1DayCrcBlksInfo		1.3.6.1.4.1.2011.6.31.1.18.1.9
The count of all blocks received with CRC anomalies on this channel during the current day as measured by adslAtucChanPerfCurr1DayTimeElapsed.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwadslAtucChanPerfPrev1DayFecBlksInfo		1.3.6.1.4.1.2011.6.31.1.18.1.10
The count of all blocks received with FEC anomalies on this channel within the most recent previous 1-day period.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwadslAtucChanPerfPrev1DayHecBlksInfo		1.3.6.1.4.1.2011.6.31.1.18.1.11
The count of all blocks received with HEC anomalies on this channel within the most recent previous 1-day period.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwadslAtucChanPerfPrev1DayCrcBlksInfo		1.3.6.1.4.1.2011.6.31.1.18.1.12
The count of all blocks received with CRC anomalies on this channel within the most recent previous 1-day period.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwadslAtucChanRtxCWInfo		1.3.6.1.4.1.2011.6.31.1.18.1.13
The count of units request retransmission since agent reset.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

hwadslAtucChanRtxCorrectedCWInfo		1.3.6.1.4.1.2011.6.31.1.18.1.14
The count of units corrected by retransmission since agent reset.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

hwadslAtucChanRtxUncorrectedCWInfo		1.3.6.1.4.1.2011.6.31.1.18.1.15
The count of units uncorrected by retransmission since agent reset.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

hwadslAtucChanPerfCurr15MinRtxCWInfo		1.3.6.1.4.1.2011.6.31.1.18.1.16
The count of units request retransmission on this channel within the current 15 minutes interval.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

hwadslAtucChanPerfCurr15MinRtxCorrectedCWInfo		1.3.6.1.4.1.2011.6.31.1.18.1.17
The count of units corrected by retransmission on this channel within the current 15 minutes interval.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

hwadslAtucChanPerfCurr15MinRtxUncorrectedCWInfo		1.3.6.1.4.1.2011.6.31.1.18.1.18
The count of units uncorrected by retransmission on this channel within the current 15 minutes interval.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

hwadslAtucChanPerfCurr1DayRtxCWInfo		1.3.6.1.4.1.2011.6.31.1.18.1.19
The count of units request retransmission on this channel during the current day.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

hwadslAtucChanPerfCurr1DayRtxCorrectedCWInfo		1.3.6.1.4.1.2011.6.31.1.18.1.20
The count of units corrected by retransmission on this channel during the current day.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

hwadslAtucChanPerfCurr1DayRtxUncorrectedCWInfo		1.3.6.1.4.1.2011.6.31.1.18.1.21
The count of units uncorrected by retransmission on this channel during the current day.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

hwadslAtucChanPerfPrev1DayRtxCWInfo		1.3.6.1.4.1.2011.6.31.1.18.1.22
The count of units request retransmission on this channel within the most recent previous 1-day period.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

hwadslAtucChanPerfPrev1DayRtxCorrectedCWInfo		1.3.6.1.4.1.2011.6.31.1.18.1.23
The count of units corrected by retransmission on this channel within the most recent previous 1-day period.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

hwadslAtucChanPerfPrev1DayRtxUncorrectedCWInfo		1.3.6.1.4.1.2011.6.31.1.18.1.24
The count of units uncorrected by retransmission on this channel within the most recent previous 1-day period.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

hwadslAtucChanCurr15MStartTime		1.3.6.1.4.1.2011.6.31.1.18.1.25
Start time of the current 15-minute performance statistics.
Status: current	Access: read-only
OBJECT-TYPE
	DateAndTime

hwadslAtucChanCurr1DayStartTime		1.3.6.1.4.1.2011.6.31.1.18.1.26
Start time of the current 1-day performance statistics.
Status: current	Access: read-only
OBJECT-TYPE
	DateAndTime

hwadslAturChanPerfDataInfoTable		1.3.6.1.4.1.2011.6.31.1.19
Parameter table of the ATUR channel performance: This table is used to query the performance statistics of the ATUR channel. The index of this table is ifIndex.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HwadslAturChanPerfDataInfoEntry

hwadslAturChanPerfDataInfoEntry		1.3.6.1.4.1.2011.6.31.1.19.1
Parameter table of the ATUR channel performance: This table is used to query the performance statistics of the ATUR channel. The index of this entry is ifIndex.
Status: current	Access: not-accessible
OBJECT-TYPE
	HwadslAturChanPerfDataInfoEntry

hwadslAturChanFecBlksInfo		1.3.6.1.4.1.2011.6.31.1.19.1.1
The count of all blocks received with FEC anomalies since agent reset.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwadslAturChanHecBlksInfo		1.3.6.1.4.1.2011.6.31.1.19.1.2
The count of all blocks received with HEC anomalies since agent reset.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwadslAturChanCrcBlksInfo		1.3.6.1.4.1.2011.6.31.1.19.1.3
The count of all blocks received with CRC anomalies since agent reset.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwadslAturChanPerfCurr15MinFecBlksInfo		1.3.6.1.4.1.2011.6.31.1.19.1.4
The count of all blocks received with FEC anomalies on this channel within the current 15 minutes interval.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwadslAturChanPerfCurr15MinHecBlksInfo		1.3.6.1.4.1.2011.6.31.1.19.1.5
The count of all blocks received with HEC anomalies on this channel within the current 15 minutes interval.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwadslAturChanPerfCurr15MinCrcBlksInfo		1.3.6.1.4.1.2011.6.31.1.19.1.6
The count of all blocks received with CRC anomalies on this channel within the current 15 minutes interval.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwadslAturChanPerfCurr1DayFecBlksInfo		1.3.6.1.4.1.2011.6.31.1.19.1.7
The count of all blocks received with FEC anomalies on this channel during the current day as measured by adslAturChanPerfCurr1DayTimeElapsed.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwadslAturChanPerfCurr1DayHecBlksInfo		1.3.6.1.4.1.2011.6.31.1.19.1.8
The count of all blocks received with HEC anomalies on this channel during the current day as measured by adslAturChanPerfCurr1DayTimeElapsed.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwadslAturChanPerfCurr1DayCrcBlksInfo		1.3.6.1.4.1.2011.6.31.1.19.1.9
The count of all blocks received with CRC anomalies on this channel during the current day as measured by adslAturChanPerfCurr1DayTimeElapsed.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwadslAturChanPerfPrev1DayFecBlksInfo		1.3.6.1.4.1.2011.6.31.1.19.1.10
The count of all blocks received with FEC anomalies on this channel within the most recent previous 1-day period.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwadslAturChanPerfPrev1DayHecBlksInfo		1.3.6.1.4.1.2011.6.31.1.19.1.11
The count of all blocks received with HEC anomalies on this channel within the most recent previous 1-day period.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwadslAturChanPerfPrev1DayCrcBlksInfo		1.3.6.1.4.1.2011.6.31.1.19.1.12
The count of all blocks received with HEC anomalies on this channel within the most recent previous 1-day period.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwadslAturChanRtxCWInfo		1.3.6.1.4.1.2011.6.31.1.19.1.13
The count of units request retransmission since agent reset.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

hwadslAturChanRtxCorrectedCWInfo		1.3.6.1.4.1.2011.6.31.1.19.1.14
The count of units corrected by retransmission since agent reset.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

hwadslAturChanRtxUncorrectedCWInfo		1.3.6.1.4.1.2011.6.31.1.19.1.15
The count of units uncorrected by retransmission since agent reset.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

hwadslAturChanPerfCurr15MinRtxCWInfo		1.3.6.1.4.1.2011.6.31.1.19.1.16
The count of units request retransmission on this channel within the current 15 minutes interval.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

hwadslAturChanPerfCurr15MinRtxCorrectedCWInfo		1.3.6.1.4.1.2011.6.31.1.19.1.17
The count of units corrected by retransmission on this channel within the current 15 minutes interval.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

hwadslAturChanPerfCurr15MinRtxUncorrectedCWInfo		1.3.6.1.4.1.2011.6.31.1.19.1.18
The count of units uncorrected by retransmission on this channel within the current 15 minutes interval.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

hwadslAturChanPerfCurr1DayRtxCWInfo		1.3.6.1.4.1.2011.6.31.1.19.1.19
The count of units request retransmission on this channel during the current day.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

hwadslAturChanPerfCurr1DayRtxCorrectedCWInfo		1.3.6.1.4.1.2011.6.31.1.19.1.20
The count of units corrected by retransmission on this channel during the current day.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

hwadslAturChanPerfCurr1DayRtxUncorrectedCWInfo		1.3.6.1.4.1.2011.6.31.1.19.1.21
The count of units uncorrected by retransmission on this channel during the current day.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

hwadslAturChanPerfPrev1DayRtxCWInfo		1.3.6.1.4.1.2011.6.31.1.19.1.22
The count of units request retransmission on this channel within the most recent previous 1-day period.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

hwadslAturChanPerfPrev1DayRtxCorrectedCWInfo		1.3.6.1.4.1.2011.6.31.1.19.1.23
The count of units corrected by retransmission on this channel within the most recent previous 1-day period.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

hwadslAturChanPerfPrev1DayRtxUncorrectedCWInfo		1.3.6.1.4.1.2011.6.31.1.19.1.24
The count of units uncorrected by retransmission on this channel within the most recent previous 1-day period.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

hwadslAturChanCurr15MStartTime		1.3.6.1.4.1.2011.6.31.1.19.1.25
Start time of the current 15-minute performance statistics.
Status: current	Access: read-only
OBJECT-TYPE
	DateAndTime

hwadslAturChanCurr1DayStartTime		1.3.6.1.4.1.2011.6.31.1.19.1.26
Start time of the current 1-day performance statistics.
Status: current	Access: read-only
OBJECT-TYPE
	DateAndTime

hwadslAturChanIntervalInfoTable		1.3.6.1.4.1.2011.6.31.1.20
Period table of collecting the ATUR channel performance data. This table is used to query the ATUR channel performance data collected in each period (a day is divided into 96 15-minute periods). The indexes of this table are ifIndex and adslAturChanIntervalNumber.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HwadslAturChanIntervalInfoEntry

hwadslAturChanIntervalInfoEntry		1.3.6.1.4.1.2011.6.31.1.20.1
Period table of collecting the ATUR channel performance data. This table is used to query the ATUR channel performance data collected in each period (a day is divided into 96 15-minute periods). The indexes of this entry are ifIndex and adslAturChanIntervalNumber.
Status: current	Access: not-accessible
OBJECT-TYPE
	HwadslAturChanIntervalInfoEntry

hwadslAturChanIntervalFecBlksInfo		1.3.6.1.4.1.2011.6.31.1.20.1.1
The count of all blocks received with FRC anomalies on this channel during this interval.
Status: current	Access: read-only
OBJECT-TYPE
	PerfIntervalCount

hwadslAturChanIntervalHecBlksInfo		1.3.6.1.4.1.2011.6.31.1.20.1.2
The count of all blocks received with HRC anomalies on this channel during this interval.
Status: current	Access: read-only
OBJECT-TYPE
	PerfIntervalCount

hwadslAturChanIntervalCrcBlksInfo		1.3.6.1.4.1.2011.6.31.1.20.1.3
The count of all blocks received with CRC anomalies on this channel during this interval.
Status: current	Access: read-only
OBJECT-TYPE
	PerfIntervalCount

hwadslAturChanIntervalRtxCWInfo		1.3.6.1.4.1.2011.6.31.1.20.1.4
The count of units request retransmission on this channel during this interval.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

hwadslAturChanIntervalRtxCorrectedCWInfo		1.3.6.1.4.1.2011.6.31.1.20.1.5
The count of units corrected by retransmission on this channel during this interval.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

hwadslAturChanIntervalRtxUncorrectedCWInfo		1.3.6.1.4.1.2011.6.31.1.20.1.6
The count of units uncorrected by retransmission on this channel during this interval.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

hwAdslAturChanIntervalStartTime		1.3.6.1.4.1.2011.6.31.1.20.1.7
Start time of the historical 15-minute performance statistics.
Status: current	Access: read-only
OBJECT-TYPE
	DateAndTime

hwadslLineAlarmConfProfileCfgTable		1.3.6.1.4.1.2011.6.31.1.21
This table contains information on the ADSL line configuration. One entry in this table reflects a profile defined by a manager which can be used to configure the modem for a physical line. The entry contains information on the ADSL line configuration. Each entry consists of a list of parameters that represents the configuration of an ADSL modem. When 'dynamic' profiles are implemented, a default profile will always exist. This profile's name will be set to 'DEFVAL' and its parameters will be set to vendor specific values, unless otherwise specified in this document. When 'static' profiles are implemented, profiles are automatically created or destroyed as ADSL physical lines are discovered and removed by the system. The name of the profile will be equivalent to the decimal value of the line's interface index. The index of this table is adslLineAlarmConfProfileName.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HwadslLineAlarmConfProfileCfgEntry

hwadslLineAlarmConfProfileCfgEntry		1.3.6.1.4.1.2011.6.31.1.21.1
This table contains information on the ADSL line configuration. One entry in this table reflects a profile defined by a manager which can be used to configure the modem for a physical line. The entry contains information on the ADSL line configuration. Each entry consists of a list of parameters that represents the configuration of an ADSL modem. When 'dynamic' profiles are implemented, a default profile will always exist. This profile's name will be set to 'DEFVAL' and its parameters will be set to vendor specific values, unless otherwise specified in this document. When 'static' profiles are implemented, profiles are automatically created or destroyed as ADSL physical lines are discovered and removed by the system. The name of the profile will be equivalent to the decimal value of the line's interface index. The index of this entry is adslLineAlarmConfProfileName.
Status: current	Access: not-accessible
OBJECT-TYPE
	HwadslLineAlarmConfProfileCfgEntry

hwadslLineAlarmConfProfileDyingGaspCfg		1.3.6.1.4.1.2011.6.31.1.21.1.1
This object enables/disables the report of LOSS-OF-POWER alarm in an ADSL line. This object is defaulted enable(1). Options: 1. enable(1) - The report of LOSS-OF-POWER alarm in an ADSL line is enabled 2. disable(2) - The report of LOSS-OF-POWER alarm in an ADSL line is disabled Default: enable(1)
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

hwadslLineAlarmConfProfXturThresh15MinLeftrs		1.3.6.1.4.1.2011.6.31.1.21.1.2
A threshold for the hwAdslAturPerfCurr15MLeftrs counter, The value 0 means that no threshold is specified for the associated counter. Unit: seconds
Status: current	Access: read-create
OBJECT-TYPE
	HCPerfIntervalThreshold

hwAdslLineAlarmConfProfileActiveFailAlarmSwitch		1.3.6.1.4.1.2011.6.31.1.21.1.3
This object enable/disable the active fail alarm switch. Options: 1. enable(1) - The active fail alarm switch is enabled 2. disable(2) - The active fail alarm switch is disabled
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

hwAdslPortPerformanceStatInfoTable		1.3.6.1.4.1.2011.6.31.1.22
This table is used to describe the performance statistics of the ADSL port within 15 minutes. The indexes of this table are ifIndex and hwAdslPort15minutesPerformanceIntervalIndex.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HwAdslPortPerformanceStatInfoEntry

hwAdslPortPerformanceStatInfoEntry		1.3.6.1.4.1.2011.6.31.1.22.1
This table is used to describe the performance statistics of the ADSL port within 15 minutes. The indexes of this entry are ifIndex and hwAdslPort15minutesPerformanceIntervalIndex.
Status: current	Access: not-accessible
OBJECT-TYPE
	HwAdslPortPerformanceStatInfoEntry

hwAdslPort15minutesPerformanceIntervalIndex		1.3.6.1.4.1.2011.6.31.1.22.1.1
The index of the interval which is queried. Range: 0-96
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	0..96

hwAdslPort15minutesPerformanceInBytesInfo		1.3.6.1.4.1.2011.6.31.1.22.1.2
Read the received bytes of xDSL port during 15 minutes.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwAdslPort15minutesPerformanceOutBytesInfo		1.3.6.1.4.1.2011.6.31.1.22.1.3
Read the transmitted bytes of xDSL port during 15 minutes.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwAdslPortSyncSuccNumberInfo		1.3.6.1.4.1.2011.6.31.1.22.1.4
Number of successful activations within 15 minutes.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwAdslPortSyncFailNumberInfo		1.3.6.1.4.1.2011.6.31.1.22.1.5
Number of failed activations within 15 minutes.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwAdslPortAtucCodeViolationInfo		1.3.6.1.4.1.2011.6.31.1.22.1.6
Seconds of head errors of the ATUC cell within 15 minutes.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwAdslPortAturCodeViolationInfo		1.3.6.1.4.1.2011.6.31.1.22.1.7
Seconds of the head errors of the ATUC cell within 15 minutes.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwAdslPortAtucFecSecondsInfo		1.3.6.1.4.1.2011.6.31.1.22.1.8
Seconds of the ATUC FEC errors within 15 minutes.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwAdslPortAturFecSecondsInfo		1.3.6.1.4.1.2011.6.31.1.22.1.9
Seconds of the ATUR FEC errors within 15 minutes.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwAdslPortCurrent15minutesTimeElapseInfo		1.3.6.1.4.1.2011.6.31.1.22.1.10
Seconds that is passed within the current 15 minutes.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwAdslPortAtucHecDropCellsCntInfo		1.3.6.1.4.1.2011.6.31.1.22.1.11
ATUC cells discarded with HEC Errors.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwAdslPortAturHecDropCellsCntInfo		1.3.6.1.4.1.2011.6.31.1.22.1.12
ATUR cells discarded with HEC Errors.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwAdslLineConfProfileInfo		1.3.6.1.4.1.2011.6.31.1.22.1.13
The value of this object identifies the row in the ADSL Line Configuration Profile Table, (adslLineConfProfileTable), which applies for this ADSL line, and channels if applicable. For 'dynamic' mode, in the case which the configuration profile has not been set, the value will be set to 'DEFVAL'. If the implementator of this MIB has chosen not to implement 'dynamic assignment' of profiles, this object's MIN-ACCESS is read-only.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..32)

hwAdslPort15minUpTimeInfo		1.3.6.1.4.1.2011.6.31.1.22.1.14
The up time in the interval. Unit: seconds
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwAdslAtucCurrAtnInfo		1.3.6.1.4.1.2011.6.31.1.22.1.15
Measured difference in the total power transmitted by the peer ATU and the total power received by this ATU. Range: 0-630 Unit: tenth dB
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32	0..630

hwAdslAtucCurrSnrMgnInfo		1.3.6.1.4.1.2011.6.31.1.22.1.16
Noise Margin as seen by this ATU with respect to its received signal. Unit: tenth dB
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	-640..640

hwAdslAtucCurrAttainableRateInfo		1.3.6.1.4.1.2011.6.31.1.22.1.17
Indicates the maximum currently attainable data rate by the ATU. This value will be equal or greater than the current line rate. Unit: bps
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

hwAdslAtucChanCurrTxRateInfo		1.3.6.1.4.1.2011.6.31.1.22.1.18
The actual transmitted rate on this channel. Unit: bps
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

hwAdslAturCurrAtnInfo		1.3.6.1.4.1.2011.6.31.1.22.1.19
Measured difference in the total power transmitted by the peer ATU and the total power received by this ATU. Range: 0-630 Unit: tenth dB
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32	0..630

hwAdslAturCurrSnrMgnInfo		1.3.6.1.4.1.2011.6.31.1.22.1.20
Noise Margin as seen by this ATU with respect to its received signal. Range: (-640)-(640) Unit: tenth dB
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	-640..640

hwAdslAturCurrAttainableRateInfo		1.3.6.1.4.1.2011.6.31.1.22.1.21
Indicates the maximum currently attainable data rate by the ATU. This value will be equal or greater than the current line rate. Unit: bps
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

hwAdslAturChanCurrTxRateInfo		1.3.6.1.4.1.2011.6.31.1.22.1.22
The actual transmitted rate on this channel. Unit: bps
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

hwAdslAtucIntervalESsInfo		1.3.6.1.4.1.2011.6.31.1.22.1.23
Seconds of the ATU-C errors at the interval. Unit: seconds
Status: current	Access: read-only
OBJECT-TYPE
	PerfIntervalCount

hwAdslAtucIntervalLofsInfo		1.3.6.1.4.1.2011.6.31.1.22.1.24
The count of seconds in the interval when there was Loss of Framing. Unit: seconds
Status: current	Access: read-only
OBJECT-TYPE
	PerfIntervalCount

hwAdslAtucIntervalLolsInfo		1.3.6.1.4.1.2011.6.31.1.22.1.25
The count of seconds in the interval when there was Loss of Link. Unit: seconds
Status: current	Access: read-only
OBJECT-TYPE
	PerfIntervalCount

hwAdslAtucIntervalLossInfo		1.3.6.1.4.1.2011.6.31.1.22.1.26
The count of seconds in the interval when there was Loss of Signal. Unit: seconds
Status: current	Access: read-only
OBJECT-TYPE
	PerfIntervalCount

hwAdslAtucIntervalLprsInfo		1.3.6.1.4.1.2011.6.31.1.22.1.27
The count of seconds in the interval when there was Loss of Power. Unit: seconds
Status: current	Access: read-only
OBJECT-TYPE
	PerfIntervalCount

hwAdslAturIntervalESsInfo		1.3.6.1.4.1.2011.6.31.1.22.1.28
Seconds of the ATU-R errors at the interval. Unit: seconds
Status: current	Access: read-only
OBJECT-TYPE
	PerfIntervalCount

hwAdslAturIntervalLofsInfo		1.3.6.1.4.1.2011.6.31.1.22.1.29
The count of seconds in the interval when there was Loss of Framing. Unit: seconds
Status: current	Access: read-only
OBJECT-TYPE
	PerfIntervalCount

hwAdslAturIntervalLossInfo		1.3.6.1.4.1.2011.6.31.1.22.1.30
The count of seconds in the interval when there was Loss of Signal. Unit: seconds
Status: current	Access: read-only
OBJECT-TYPE
	PerfIntervalCount

hwAdslAturIntervalLprsInfo		1.3.6.1.4.1.2011.6.31.1.22.1.31
The count of seconds in the interval when there was Loss of Power. Unit: seconds
Status: current	Access: read-only
OBJECT-TYPE
	PerfIntervalCount

hwAdslAtucChanIntervalReceivedBlksInfo		1.3.6.1.4.1.2011.6.31.1.22.1.32
The count of all encoded blocks received on this channel during this interval.
Status: current	Access: read-only
OBJECT-TYPE
	PerfIntervalCount

hwAdslAtucChanIntervalTransmittedBlksInfo		1.3.6.1.4.1.2011.6.31.1.22.1.33
The count of all encoded blocks transmitted on this channel during this interval.
Status: current	Access: read-only
OBJECT-TYPE
	PerfIntervalCount

hwAdslAtucChanIntervalCorrectedBlksInfo		1.3.6.1.4.1.2011.6.31.1.22.1.34
The count of all blocks received with errors that were corrected on this channel during this interval.
Status: current	Access: read-only
OBJECT-TYPE
	PerfIntervalCount

hwAdslAtucChanIntervalUncorrectBlksInfo		1.3.6.1.4.1.2011.6.31.1.22.1.35
The count of all blocks received with uncorrectable errors on this channel during this interval.
Status: current	Access: read-only
OBJECT-TYPE
	PerfIntervalCount

hwAdslAturChanIntervalReceivedBlksInfo		1.3.6.1.4.1.2011.6.31.1.22.1.36
The count of all encoded blocks received on this channel during this interval.
Status: current	Access: read-only
OBJECT-TYPE
	PerfIntervalCount

hwAdslAturChanIntervalTransmittedBlksInfo		1.3.6.1.4.1.2011.6.31.1.22.1.37
The count of all encoded blocks transmitted on this channel during this interval.
Status: current	Access: read-only
OBJECT-TYPE
	PerfIntervalCount

hwAdslAturChanIntervalCorrectedBlksInfo		1.3.6.1.4.1.2011.6.31.1.22.1.38
The count of all blocks received with errors that were corrected on this channel during this interval.
Status: current	Access: read-only
OBJECT-TYPE
	PerfIntervalCount

hwAdslAturChanIntervalUncorrectBlksInfo		1.3.6.1.4.1.2011.6.31.1.22.1.39
The count of all blocks received with uncorrectable errors on this channel during this interval.
Status: current	Access: read-only
OBJECT-TYPE
	PerfIntervalCount

hwAdslAtucIntervalSesLInfo		1.3.6.1.4.1.2011.6.31.1.22.1.40
For the each interval, adslAtucIntervalSesL reports the number of seconds during which there have been severely errored seconds-line. Unit: seconds
Status: current	Access: read-only
OBJECT-TYPE
	PerfIntervalCount

hwAdslAtucIntervalUasLInfo		1.3.6.1.4.1.2011.6.31.1.22.1.41
For the each interval, adslAtucIntervalUasL reports the number of seconds during which there have been unavailable seconds-line. Unit: seconds
Status: current	Access: read-only
OBJECT-TYPE
	PerfIntervalCount

hwAdslAturIntervalSesLInfo		1.3.6.1.4.1.2011.6.31.1.22.1.42
For the each interval, adslAturIntervalSesL reports the number of seconds during which there have been severely errored seconds-line. Unit: seconds
Status: current	Access: read-only
OBJECT-TYPE
	PerfIntervalCount

hwAdslAturIntervalUasLInfo		1.3.6.1.4.1.2011.6.31.1.22.1.43
For the each interval, adslAturIntervalUasL reports the number of seconds during which there have been unavailable seconds-line. Unit: seconds
Status: current	Access: read-only
OBJECT-TYPE
	PerfIntervalCount

hwAdslPortCurrentActModeInfo		1.3.6.1.4.1.2011.6.31.1.22.1.44
Instantaneous value of the technology type that line is currently trained up under. Options: 1. adsl(1) - Indicates that line is currently trained up under adsl type 2. adsl2(2) - Indicates that line is currently trained up under adsl2 type 2. adsl2plus(3) - Indicates that line is currently trained up under adsl2+ type
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	adsl(1), adsl2(2), adsl2plus(3)

hwadslPortRateChangeTrapParaInfoTable		1.3.6.1.4.1.2011.6.31.1.23
ADSL line rate change trap parameter table. The index of this table is ifIndex.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HwadslPortRateChangeTrapParaInfoEntry

hwadslPortRateChangeTrapParaInfoEntry		1.3.6.1.4.1.2011.6.31.1.23.1
ADSL line rate change trap parameter table. The index of this entry is ifIndex.
Status: current	Access: not-accessible
OBJECT-TYPE
	HwadslPortRateChangeTrapParaInfoEntry

hwAdslPortRateChangeTrapIPIAIDInfo		1.3.6.1.4.1.2011.6.31.1.23.1.1
The port IPIAID is reported when the port rate changes.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	OCTET STRING	Size(0..63)

hwAdslPortRateChangeTrapMUXIDInfo		1.3.6.1.4.1.2011.6.31.1.23.1.2
The port MUXID is reported when the port rate changes. Range: 0-20
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	OCTET STRING	Size(0..20)

hwAdslPortRateChangeTrapTimeStampInfo		1.3.6.1.4.1.2011.6.31.1.23.1.3
The time stamp of Line rate change trap. Standard Unix format; as the number of seconds since 1/1/1970. Unit:Seconds.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	Counter32

hwAdslPortRateChangeTrapDSLineRateInfo		1.3.6.1.4.1.2011.6.31.1.23.1.4
Down stream line rate after line rate change.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	Gauge32

hwAdslPortRateChangeTrapUSLineRateInfo		1.3.6.1.4.1.2011.6.31.1.23.1.5
Up stream line rate after line rate change.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	Gauge32

hwAdslPortRateChangeTrapEventTypeInfo		1.3.6.1.4.1.2011.6.31.1.23.1.6
Event type reported during the previous change of the rate If both the upstream and downstream rates change, this leaf outputs character string 'DU'. If only the upstream rates changes, this leaf outputs character string 'US'. If only the downstream rates changes, this leaf outputs character string 'DS'.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	OCTET STRING	Size(0..2)

hwAdslPortRateChangeTrapDslTypeInfo		1.3.6.1.4.1.2011.6.31.1.23.1.7
DSL line type of the port whose rate changes.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	OCTET STRING	Size(0..5)

hwadslSysManagementParaCfgTable		1.3.6.1.4.1.2011.6.31.1.24
OBJECT IDENTIFIER

hwadslPortRateChangeTrapCfgConfig		1.3.6.1.4.1.2011.6.31.1.24.1
Enables or disables ADSL port line-rate change trap feature. Options: 1. enabled(1) - ADSL port line-rate change trap feature is enabled 2. disabled(2) - ADSL port line-rate change trap feature is disabled
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

hwadsl2MaximumInterleavedDepth		1.3.6.1.4.1.2011.6.31.1.24.2
Set the ADSL2 maximum interleaved depth function. Default values:maxInterleavedDepth511(2). Options: 1. maxInterleavedDepth64(1) - it means the interleaving depth up to 64 can be selected 2. maxInterleavedDepth511(2) - it means the interleaving depth up to 512 can be selected
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	maxInterleavedDepth64(1), maxInterleavedDepth511(2)

hwadslAtucPerfDataInfoTable		1.3.6.1.4.1.2011.6.31.1.25
Table of querying the performance statistics of the ATUC port. ADSL physical interfaces are those ifEntries where ifType is equal to adsl(94). The index of this table is ifIndex.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HwadslAtucPerfDataInfoEntry

hwadslAtucPerfDataInfoEntry		1.3.6.1.4.1.2011.6.31.1.25.1
Table of querying the performance statistics of the ATUC port. ADSL physical interfaces are those ifEntries where ifType is equal to adsl(94). The index of this entry is ifIndex.
Status: current	Access: not-accessible
OBJECT-TYPE
	HwadslAtucPerfDataInfoEntry

hwAdslAtucPerfFailFullInitsInfo		1.3.6.1.4.1.2011.6.31.1.25.1.1
The count of the line initialization failed attempts since agent reset.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwAdslAtucPerfCurr15MinFailFullInitsInfo		1.3.6.1.4.1.2011.6.31.1.25.1.2
The count of the line initialization failed attempts in the current 15 minutes interval.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwAdslAtucPerfCurr1DayFailFullInitsInfo		1.3.6.1.4.1.2011.6.31.1.25.1.3
The count of the line initialization failed attempts in the day as measured by adslAtucPerfCurr1DayTimeElapsed.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwAdslAtucPerfPrev1DayFailFullInitsInfo		1.3.6.1.4.1.2011.6.31.1.25.1.4
The count of the line initialization failed attempts in the most recent previous 1-day period.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwAdslAtucPerfFullInitsInfo		1.3.6.1.4.1.2011.6.31.1.25.1.5
Count of the line initialization full attempts since agent reset.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwAdslAtucPerfCurr15MinFullInitsInfo		1.3.6.1.4.1.2011.6.31.1.25.1.6
Count of the line initialization full attempts in the current 15 minute interval.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwAdslAtucPerfCurr1DayFullInitsInfo		1.3.6.1.4.1.2011.6.31.1.25.1.7
Count of the line initialization full attempts in the day as measured by adslAtucPerfCurr1DayTimeElapsed.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwAdslAtucPerfPrev1DayFullInitsInfo		1.3.6.1.4.1.2011.6.31.1.25.1.8
Count of the line initialization full attempts in the most recent previous 1-day period.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwAdslAtucPerfCurr15MLeftrs		1.3.6.1.4.1.2011.6.31.1.25.1.9
If retransmission is used in a given transmit direction, this parameter is a count of the seconds with a near-end leftr defect present observed over the current 15 minutes accumulation period.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwAdslAtucPerfCurr15MEfb		1.3.6.1.4.1.2011.6.31.1.25.1.10
If retransmission is used in a given transmit direction, this parameter is a count of the number of error-free bits observed over the current 15 minutes accumulation period. The near-end counter is only defined in upstream.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwAdslAtucPerfCurr15MMinEftr		1.3.6.1.4.1.2011.6.31.1.25.1.11
If retransmission is used in a given transmit direction, this parameter MINEFTR reports the minimum of the EFTR(Error-free throughput rate) observed over the current 15 minutes accumulation period. The near-end value is only defined in upstream.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwAdslAtucPerfCurr1DayLeftrs		1.3.6.1.4.1.2011.6.31.1.25.1.12
If retransmission is used in a given transmit direction, this parameter is a count of the seconds with a near-end leftr defect present observed over the current 24 hours accumulation period.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwAdslAtucPerfCurr1DayEfb		1.3.6.1.4.1.2011.6.31.1.25.1.13
If retransmission is used in a given transmit direction, this parameter is a count of the number of error-free bits current observed over the current 24 hours accumulation period. The near-end counter is only defined in upstream.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwAdslAtucPerfCurr1DayMinEftr		1.3.6.1.4.1.2011.6.31.1.25.1.14
If retransmission is used in a given transmit direction, this parameter MINEFTR reports the minimum of the EFTR(Error-free throughput rate) observed over the current 24 hours accumulation period. The near-end value is only defined in upstream.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwAdslAtucPerfPrev1DayLeftrs		1.3.6.1.4.1.2011.6.31.1.25.1.15
If retransmission is used in a given transmit direction, this parameter is a count of the seconds with a near-end leftr defect present over the previous 24 hours accumulation period during this interval.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwAdslAtucPerfPrev1DayEfb		1.3.6.1.4.1.2011.6.31.1.25.1.16
If retransmission is used in a given transmit direction, this parameter is a count of the number of error-free bits observed over the previous 24 hours accumulation period during this interval. The near-end counter is only defined in upstream.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwAdslAtucPerfPrev1DayMinEftr		1.3.6.1.4.1.2011.6.31.1.25.1.17
If retransmission is used in a given transmit direction, this parameter MINEFTR reports the minimum of the EFTR(Error-free throughput rate) observed over the previous 24 hours accumulation period during this interval. The near-end value is only defined in upstream.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwAdslAtucPerfCurrEverBeforeLeftrs		1.3.6.1.4.1.2011.6.31.1.25.1.18
If retransmission is used in a given transmit direction, this parameter is a count of the seconds with a near-end leftr defect present observed ever before.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwAdslAtucPerfCurrEverBeforeEfb		1.3.6.1.4.1.2011.6.31.1.25.1.19
If retransmission is used in a given transmit direction, this parameter is a count of the number of error-free bits observed ever before. The near-end counter is only defined in upstream.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwAdslAtucPerfCurrEverBeforeMinEftr		1.3.6.1.4.1.2011.6.31.1.25.1.20
If retransmission is used in a given transmit direction, this parameter MINEFTR reports the minimum of the EFTR(Error-free throughput rate) observed ever before. The near-end value is only defined in upstream.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwAdslAtucPerfCurr15MStartTime		1.3.6.1.4.1.2011.6.31.1.25.1.21
Start time of the current 15-minute performance statistics.
Status: current	Access: read-only
OBJECT-TYPE
	DateAndTime

hwAdslAtucPerfCurr1DayStartTime		1.3.6.1.4.1.2011.6.31.1.25.1.22
Start time of the current 1-day performance statistics.
Status: current	Access: read-only
OBJECT-TYPE
	DateAndTime

hwAdslAtucPerfCurr15MInmainpeq		1.3.6.1.4.1.2011.6.31.1.25.1.23
This parameter is a count of the INMAINPEQi anomalies occurring on the line during current 15 minutes. Each INMAINPEQ needs 4 bytes.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..68)

hwAdslAtucPerfCurr15MInmame		1.3.6.1.4.1.2011.6.31.1.25.1.24
This parameter is a count of the INMAME anomalies occurring on the line during current 15 minutes.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwAdslAtucPerfCurr15MInmaiat		1.3.6.1.4.1.2011.6.31.1.25.1.25
This parameter is a count of the INMAIATi anomalies occurring on the line during current 15 minutes. Each INMAIAT needs 4 bytes.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..32)

hwAdslAtucPerfCurr1DayInmainpeq		1.3.6.1.4.1.2011.6.31.1.25.1.26
This parameter is a count of the INMAINPEQi anomalies occurring on the line during current 1 day. Each INMAINPEQ needs 4 bytes.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..68)

hwAdslAtucPerfCurr1DayInmame		1.3.6.1.4.1.2011.6.31.1.25.1.27
This parameter is a count of the INMAME anomalies occurring on the line during current 1 day.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwAdslAtucPerfCurr1DayInmaiat		1.3.6.1.4.1.2011.6.31.1.25.1.28
This parameter is a count of the INMAIATi anomalies occurring on the line during current 1 day. Each INMAIAT needs 4 bytes.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..32)

hwAdslAtucPerfPre1DayInmainpeq		1.3.6.1.4.1.2011.6.31.1.25.1.29
This parameter is a count of the INMAINPEQi anomalies occurring on the line during the most recent previous 1-day period. Each INMAINPEQ needs 4 bytes.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..68)

hwAdslAtucPerfPre1DayInmame		1.3.6.1.4.1.2011.6.31.1.25.1.30
This parameter is a count of the INMAME anomalies occurring on the line during the most recent previous 1-day period.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwAdslAtucPerfPre1DayInmaiat		1.3.6.1.4.1.2011.6.31.1.25.1.31
This parameter is a count of the INMAIATi anomalies occurring on the line during the most recent previous 1-day period. Each INMAIAT needs 4 bytes.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..32)

hwAdslAtucPerfCurrEverBeforeInmainpeq		1.3.6.1.4.1.2011.6.31.1.25.1.32
This parameter is a count of the INMAINPEQi anomalies occurring on the line ever before. Each INMAINPEQ needs 4 bytes.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..68)

hwAdslAtucPerfCurrEverBeforeInmame		1.3.6.1.4.1.2011.6.31.1.25.1.33
This parameter is a count of the INMAME anomalies occurring on the line ever before.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwAdslAtucPerfCurrEverBeforeInmaiat		1.3.6.1.4.1.2011.6.31.1.25.1.34
This parameter is a count of the INMAIATi anomalies occurring on the line ever before. Each INMAIAT needs 4 bytes.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..32)

hwadslAtucIntervalInfoTable		1.3.6.1.4.1.2011.6.31.1.26
This table provides one row for each ATUC performance data collection interval. ADSL physical interfaces are those ifEntries where ifType is equal to adsl(94). The index of this table is ifIndex.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HwadslAtucIntervalInfoEntry

hwadslAtucIntervalInfoEntry		1.3.6.1.4.1.2011.6.31.1.26.1
This table provides one row for each ATUC performance data collection interval. ADSL physical interfaces are those ifEntries where ifType is equal to adsl(94). The index of this entry is ifIndex.
Status: current	Access: not-accessible
OBJECT-TYPE
	HwadslAtucIntervalInfoEntry

hwAdslAtucIntervalFailFullInitsInfo		1.3.6.1.4.1.2011.6.31.1.26.1.1
The count of the line initialization failed attempts during the interval.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwAdslAtucIntervalFullInitsInfo		1.3.6.1.4.1.2011.6.31.1.26.1.2
Count of the line initialization full attempts during the interval.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwAdslAtucIntervalLeftrs		1.3.6.1.4.1.2011.6.31.1.26.1.3
If retransmission is used in a given transmit direction, this parameter is a count of the seconds with a near-end leftr defect present observed over the previous 15 minutes accumulation period during the interval.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwAdslAtucIntervalEfb		1.3.6.1.4.1.2011.6.31.1.26.1.4
If retransmission is used in a given transmit direction, this parameter is a count of the number of error-free bits observed over the previous 15 minutes accumulation period during the interval. The near-end counter is only defined in upstream.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwAdslAtucIntervalMinEftr		1.3.6.1.4.1.2011.6.31.1.26.1.5
If retransmission is used in a given transmit direction, this parameter MINEFTR reports the minimum of the EFTR(Error-free throughput rate) observed over the previous 15 minutes accumulation period during the interval. The near-end value is only defined in upstream.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwAdslAtucIntervalStartTime		1.3.6.1.4.1.2011.6.31.1.26.1.6
Start time of the historical 15-minute performance statistics.
Status: current	Access: read-only
OBJECT-TYPE
	DateAndTime

hwAdslAtucIntervalInmainpeq		1.3.6.1.4.1.2011.6.31.1.26.1.7
This parameter is a count of the INMAINPEQi anomalies occurring on the line at 15 minutes interval.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..68)

hwAdslAtucIntervalInmame		1.3.6.1.4.1.2011.6.31.1.26.1.8
This parameter is a count of the INMAME anomalies occurring on the line at 15 minutes interval.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwAdslAtucIntervalInmaiat		1.3.6.1.4.1.2011.6.31.1.26.1.9
This parameter is a count of the INMAIATi anomalies occurring on the line at 15 minutes interval. Each INMAIAT needs 4 bytes.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..32)

hwadslAtucChanIntervalInfoTable		1.3.6.1.4.1.2011.6.31.1.28
Period table of collecting the ATUC channel performance data This table is used to query the ATUC channel performance data collected in each period (a day is divided into 96 15-minute periods). The indexes of this table are ifIndex and adslAtucChanIntervalNumber.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HwadslAtucChanIntervalInfoEntry

hwadslAtucChanIntervalInfoEntry		1.3.6.1.4.1.2011.6.31.1.28.1
Period table of collecting the ATUC channel performance data This table is used to query the ATUC channel performance data collected in each period (a day is divided into 96 15-minute periods). The indexes of this entry are ifIndex and adslAtucChanIntervalNumber.
Status: current	Access: not-accessible
OBJECT-TYPE
	HwadslAtucChanIntervalInfoEntry

hwadslAtucChanIntervalFecBlksInfo		1.3.6.1.4.1.2011.6.31.1.28.1.1
The count of all blocks received with FRC anomalies on this channel during this interval.
Status: current	Access: read-only
OBJECT-TYPE
	PerfIntervalCount

hwadslAtucChanIntervalHecBlksInfo		1.3.6.1.4.1.2011.6.31.1.28.1.2
The count of all blocks received with HRC anomalies on this channel during this interval.
Status: current	Access: read-only
OBJECT-TYPE
	PerfIntervalCount

hwadslAtucChanIntervalCrcBlksInfo		1.3.6.1.4.1.2011.6.31.1.28.1.3
The count of all blocks received with CRC anomalies on this channel during this interval.
Status: current	Access: read-only
OBJECT-TYPE
	PerfIntervalCount

hwadslAtucChanIntervalRtxCWInfo		1.3.6.1.4.1.2011.6.31.1.28.1.4
The count of units request retransmission on this channel during this interval.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

hwadslAtucChanIntervalRtxCorrectedCWInfo		1.3.6.1.4.1.2011.6.31.1.28.1.5
The count of units corrected by retransmission on this channel during this interval.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

hwadslAtucChanIntervalRtxUncorrectedCWInfo		1.3.6.1.4.1.2011.6.31.1.28.1.6
The count of units uncorrected by retransmission on this channel during this interval.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

hwAdslAtucChanIntervalStartTime		1.3.6.1.4.1.2011.6.31.1.28.1.7
Start time of the historical 15-minute performance statistics.
Status: current	Access: read-only
OBJECT-TYPE
	DateAndTime

hwAdsl2SCStatusInfoTable		1.3.6.1.4.1.2011.6.31.1.29
The table hwAdsl2SCStatusInfoTable contains status parameters of the ADSL2 sub-carriers. The indexes of this table are ifIndex and hwAdsl2SCStatusDirectionInfo.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HwAdsl2SCStatusInfoEntry

hwAdsl2SCStatusInfoEntry		1.3.6.1.4.1.2011.6.31.1.29.1
The table hwAdsl2SCStatusInfoTable contains status parameters of the ADSL2 sub-carriers. The indexes of this entry are ifIndex and hwAdsl2SCStatusDirectionInfo.
Status: current	Access: not-accessible
OBJECT-TYPE
	HwAdsl2SCStatusInfoEntry

hwAdsl2SCStatusDirectionInfo		1.3.6.1.4.1.2011.6.31.1.29.1.1
The direction of the sub-carrier is either upstream or downstream. Options: 1. upstream(1) - The direction of the sub-carrier is upstream 2. downstream(2) - The direction of the sub-carrier is downstream
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER	upstream(1), downstream(2)

hwAdsl2SCStatusSnrInfo		1.3.6.1.4.1.2011.6.31.1.29.1.2
The SNR Margin per sub-carrier, expressing the ratio between the received signal power and received noise power per subscriber. It is an array of 512 octets, designed for supporting up to 512 (downstream) sub-carriers. The number of utilized octets on downstream direction depends on NSCds, and on upstream direction it depends on NSCus. This value is referred to here as NSC. Octet i (0 <= i < NSC) is set to a value in the range 0 to 254 to indicate that the respective downstream or upstream sub- carrier i has SNR of: (-32 + Adsl2SubcarrierSnr(i)/2) in dB (i.e., -32 to 95dB). The special value 255 means that no measurement could be done for the subcarrier because it is out of the PSD mask passband or that the noise PSD is out of range to be represented. Each value in this array is 8 bits wide.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..512)

hwAdsl2SCStatusBitsAllocInfo		1.3.6.1.4.1.2011.6.31.1.29.1.3
The bits allocation per sub-carrier. An array of 256 octets (512 nibbles), designed for supporting up to 512 (downstream) sub-carriers. The number of utilized nibbles on downstream direction depends on NSCds, and on upstream direction it depends on NSCus. This value is referred to here as NSC. Nibble i (0 <= i < NSC) is set to a value in the range 0 to 15 to indicate that the respective downstream or upstream sub-carrier i has the same amount of bits allocation.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..256)

hwAdsl2SCStatusGainAllocInfo		1.3.6.1.4.1.2011.6.31.1.29.1.4
The gain allocation per sub-carrier. An array of 512 16-bits values, designed for supporting up to 512 (downstream) sub- carriers. The number of utilized octets on downstream direction depends on NSCds, and on upstream direction it depends on NSCus. This value is referred to here as NSC. Value i (0 <= i < NSC) is in the range 0 to 4093 to indicate that the respective downstream or upstream sub-carrier i has the same amount of gain value. The gain value is represented as a multiple of 1/512 on a linear scale. Each value in this array is 16 bits wide and is stored in big endian format.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..1024)

hwAdsl2SCStatusLogInfo		1.3.6.1.4.1.2011.6.31.1.29.1.5
An array of up to 512 real H(f) logarithmic representation values in dB for the respective transmission direction. It is designed to support up to 512 (downstream) sub-carriers. The number of utilized values on downstream direction depends on NSCds, and on upstream direction it depends on NSCus. This value is referred to here as NSC. Each array entry represents the real Hlog(f = i*Df) value for a particular sub-carrier index i, (0 <= i < NSC). The real Hlog(f) value is represented as (6-m(i)/10), with m(i) in the range 0 to 1022. A special value m=1023 indicates that no measurement could be done for the subcarrier because it is out of the passband or that the attenuation is out of range to be represented. This parameter is applicable in loop diagnostic procedure and initialization. Each value in this array is 16 bits wide and is stored in big endian format.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..1024)

hwAdsl2SCStatusQlnInfo		1.3.6.1.4.1.2011.6.31.1.29.1.6
An array of up to 512 real Quiet Line Noise values in dBm/Hz for the respective transmission direction. It is designed for up to 512 (downstream) sub-carriers. The number of utilized values on downstream direction depends on NSCds, and on upstream direction it depends on NSCus. This value is referred to here as NSC. Each array entry represents the QLN(f = i*Df) value for a particular sub-carrier index i, (0 <= i < NSC). The QLN(f) is represented as (-23-n(i)/2), with n(i) in the range 0 to 254. A special value n(i)=255 indicates that no measurement could be done for the subcarrier because it is out of the passband or that the noise PSD is out of range to be represented. This parameter is applicable in loop diagnostic procedure and initialization. Each value in this array is 8 bits wide.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..512)

hwAdsl2SCStatusSnrMarginInfo		1.3.6.1.4.1.2011.6.31.1.29.1.7
SNR Margin is the maximum increase in dB of the noise power received at the ATU (ATU-R on downstream direction and ATU-C on upstream direction), such that the BER requirements are met for all bearer channels received at the ATU. It ranges from -640 to 630 units of 0.1 dB (physical values are -64 to 63 dB).
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..1024)

hwAdsl2SCStatusTxPSDInfo		1.3.6.1.4.1.2011.6.31.1.29.1.8
The PSD MASK per sub-carrier. An array of 512 16-bits values, designed for supporting up to 512 (downstream) sub-carriers. It ranges from -1400 to -300 units of 0.1 dBm/Hz (physical values are -140 to -30 dBm/Hz)
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..1024)

hwxdslDynamicProfCfgTable		1.3.6.1.4.1.2011.6.31.1.30
This table includes common parameters of the xDSL Dynamic profile. The index of this table is hwxdslDynamicProfProfileNameCfg.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HwxdslDynamicProfCfgEntry

hwxdslDynamicProfCfgEntry		1.3.6.1.4.1.2011.6.31.1.30.1
This table includes common parameters of the xDSL Dynamic profile. The index of this entry is hwxdslDynamicProfProfileNameCfg.
Status: current	Access: not-accessible
OBJECT-TYPE
	HwxdslDynamicProfCfgEntry

hwxdslDynamicProfProfileNameCfg		1.3.6.1.4.1.2011.6.31.1.30.1.1
The name of xDSL Dynamic Profile.
Status: current	Access: not-accessible
OBJECT-TYPE
	OCTET STRING	Size(1..32)

hwxdslDynamicProfXtuTransSysEnaCfg		1.3.6.1.4.1.2011.6.31.1.30.1.2
XTU Transmission System Enabling (ATSE). A list of the different coding types enabled in this profile. It is coded in a bit-map representation with 1 or more bits set. A bit set to '1' means that the XTUs may apply the respective coding for the xDSL line. A bit set to '0' means that the XTUs cannot apply the respective coding for the XDSL line. All 'reserved' bits should be set to '0'.
Status: current	Access: read-create
OBJECT-TYPE
	BITS	ansit1413(0), etsi(1), g9921PotsNonOverlapped(2), g9921PotsOverlapped(3), g9921IsdnNonOverlapped(4), g9921isdnOverlapped(5), g9921tcmIsdnNonOverlapped(6), g9921tcmIsdnOverlapped(7), g9922potsNonOverlapped(8), g9922potsOverlapped(9), g9922tcmIsdnNonOverlapped(10), g9922tcmIsdnOverlapped(11), g9921tcmIsdnSymmetric(12), reserved1(13), reserved2(14), reserved3(15), reserved4(16), reserved5(17), g9923PotsNonOverlapped(18), g9923PotsOverlapped(19), g9923IsdnNonOverlapped(20), g9923isdnOverlapped(21), reserved6(22), reserved7(23), g9924potsNonOverlapped(24), g9924potsOverlapped(25), reserved8(26), reserved9(27), g9923AnnexIAllDigNonOverlapped(28), g9923AnnexIAllDigOverlapped(29), g9923AnnexJAllDigNonOverlapped(30), g9923AnnexJAllDigOverlapped(31), g9924AnnexIAllDigNonOverlapped(32), g9924AnnexIAllDigOverlapped(33), g9923AnnexLMode1NonOverlapped(34), g9923AnnexLMode2NonOverlapped(35), g9923AnnexLMode3Overlapped(36), g9923AnnexLMode4Overlapped(37), g9923AnnexMPotsNonOverlapped(38), g9923AnnexMPotsOverlapped(39), g9925PotsNonOverlapped(40), g9925PotsOverlapped(41), g9925IsdnNonOverlapped(42), g9925isdnOverlapped(43), reserved10(44), reserved11(45), g9925AnnexIAllDigNonOverlapped(46), g9925AnnexIAllDigOverlapped(47), g9925AnnexJAllDigNonOverlapped(48), g9925AnnexJAllDigOverlapped(49), g9925AnnexMPotsNonOverlapped(50), g9925AnnexMPotsOverlapped(51), reserved12(52), reserved13(53), reserved14(54), reserved15(55), reserved16(56), reserved17(57), reserved18(58), reserved19(59), reserved20(60), reserved21(61), reserved22(62), reserved23(63), reserved24(64), reserved25(65), reserved26(66), reserved27(67), reserved28(68), reserved29(69), reserved30(70), reserved31(71), g9932AnnexAPots(72), g9932AnnexAIsdn(73), g9932AnnexBPots(74), g9932AnnexBIsdn(75), g9932AnnexCPots(76), g9932AnnexCIsdn(77), reserved32(78), reserved33(79)

hwxdslDynamicProfBitSwapDSCfg		1.3.6.1.4.1.2011.6.31.1.30.1.3
Enables or disables the bit swap downstream of a line. Options: 1. disable(1) - The bit swap downstream of a line is disabled 2. enable(2) - The bit swap downstream of a line is enabled 3. invalidValue(-1) - Invalid value
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	disable(1), enable(2), invalidValue(-1)

hwxdslDynamicProfBitSwapUSCfg		1.3.6.1.4.1.2011.6.31.1.30.1.4
Enables or disables the bit swap upstream of a line. Options: 1. disable(1) - The bit swap upstream of a line is disabled 2. enable(2) - The bit swap upstream of a line is enabled 3. invalidValue(-1) - Invalid value
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	disable(1), enable(2), invalidValue(-1)

hwxdslDynamicProfTargetSnrmDsCfg		1.3.6.1.4.1.2011.6.31.1.30.1.5
The target Noise Margin the xTU-R receiver shall achieve, relative to the BER requirement for each of the downstream bearer channels, to successfully complete initialization. The target noise margin ranges from 0 to 310 units of 0.1 dB (Physical values are 0 to 31 dB). Range: 0-310 Unit: 0.1 dB
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..310

hwxdslDynamicProfTargetSnrmUsCfg		1.3.6.1.4.1.2011.6.31.1.30.1.6
The target Noise Margin the xTU-C receiver shall achieve, relative to the BER requirement for each of the downstream bearer channels, to successfully complete initialization. The target noise margin ranges from 0 to 310 units of 0.1 dB (Physical values are 0 to 31 dB). Range: 0-310 Unit: 0.1 dB
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..310

hwxdslDynamicProfMaxSnrmDsCfg		1.3.6.1.4.1.2011.6.31.1.30.1.7
The maximum Noise Margin the xTU-R receiver shall achieve, relative to the BER requirement for each of the downstream bearer channels, to successfully complete initialization. The target noise margin ranges from 0 to 310 units of 0.1 dB (Physical values are 0 to 31 dB). Range: 0-310 Unit: 0.1 dB
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..310

hwxdslDynamicProfMaxSnrmUsCfg		1.3.6.1.4.1.2011.6.31.1.30.1.8
The maximum Noise Margin the xTU-C receiver shall achieve, relative to the BER requirement for each of the downstream bearer channels, to successfully complete initialization. The target noise margin ranges from 0 to 310 units of 0.1 dB (Physical values are 0 to 31 dB). Range: 0-310 Unit: 0.1 dB
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..310

hwxdslDynamicProfMinSnrmDsCfg		1.3.6.1.4.1.2011.6.31.1.30.1.9
The minimum Noise Margin the xTU-R receiver shall achieve, relative to the BER requirement for each of the downstream bearer channels, to successfully complete initialization. The target noise margin ranges from 0 to 310 units of 0.1 dB (Physical values are 0 to 31 dB). Range: 0-310 Unit: 0.1 dB
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..310

hwxdslDynamicProfMinSnrmUsCfg		1.3.6.1.4.1.2011.6.31.1.30.1.10
The minimum Noise Margin the xTU-C receiver shall achieve, relative to the BER requirement for each of the downstream bearer channels, to successfully complete initialization. The target noise margin ranges from 0 to 310 units of 0.1 dB (Physical values are 0 to 31 dB). Range: 0-310 Unit: 0.1 dB
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..310

hwxdslDynamicProfCh1MinProtectionDsCfg		1.3.6.1.4.1.2011.6.31.1.30.1.11
Minimum Impulse Noise Protection on Downstream direction. The minimum impulse noise protection for the bearer channel, expressed in symbols. The parameter can take the following values: noProtection (i.e., INP not required), halfSymbol (i.e., INP length is 1/2 symbol) and 1-16 symbols in steps of 1 symbol. Options: 1. noProtection (1) - Indicates that the INP value is 0 2. halfSymbol (2) - Indicates that the INP value is 0.5 3. singleSymbol (3) - Indicates that the INP value is 1 4. twoSymbols (4) - Indicates that the INP value is 2 5. threeSymbols (5) - Indicates that the INP value is 3 6. fourSymbols (6) - Indicates that the INP value is 4 7. fiveSymbols (7) - Indicates that the INP value is 5 8. sixSymbols (8) - Indicates that the INP value is 6 9. sevenSymbols (9) - Indicates that the INP value is 7 10. eightSymbols (10) - Indicates that the INP value is 8 11. nineSymbols (11) - Indicates that the INP value is 9 12. tenSymbols (12) - Indicates that the INP value is 10 13. elevenSymbols (13) - Indicates that the INP value is 11 14. twelveSymbols (14) - Indicates that the INP value is 12 15. thirteenSymbols (15) - Indicates that the INP value is 13 16. fourteenSymbols (16) - Indicates that the INP value is 14 17. fifteenSymbols (17) - Indicates that the INP value is 15 18. sixteenSymbols (18) - Indicates that the INP value is 16 19. invalidValue(-1) - Invalid value
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	noProtection(1), halfSymbol(2), singleSymbol(3), twoSymbols(4), threeSymbols(5), fourSymbols(6), fiveSymbols(7), sixSymbols(8), sevenSymbols(9), eightSymbols(10), nineSymbols(11), tenSymbols(12), elevenSymbols(13), twelveSymbols(14), thirteenSymbols(15), fourteenSymbols(16), fifteenSymbols(17), sixteenSymbols(18), invalidValue(-1)

hwxdslDynamicProfCh1MinProtectionUsCfg		1.3.6.1.4.1.2011.6.31.1.30.1.12
Minimum Impulse Noise Protection on Upstream direction. The minimum impulse noise protection for the bearer channel, expressed in symbols. The parameter can take the following values: noProtection (i.e., INP not required), halfSymbol (i.e., INP length is 1/2 symbol) and 1-16 symbols in steps of 1 symbol. Options: 1. noProtection (1) - Indicates that the INP value is 0 2. halfSymbol (2) - Indicates that the INP value is 0.5 3. singleSymbol (3) - Indicates that the INP value is 1 4. twoSymbols (4) - Indicates that the INP value is 2 5. threeSymbols (5) - Indicates that the INP value is 3 6. fourSymbols (6) - Indicates that the INP value is 4 7. fiveSymbols (7) - Indicates that the INP value is 5 8. sixSymbols (8) - Indicates that the INP value is 6 9. sevenSymbols (9) - Indicates that the INP value is 7 10. eightSymbols (10) - Indicates that the INP value is 8 11. nineSymbols (11) - Indicates that the INP value is 9 12. tenSymbols (12) - Indicates that the INP value is 10 13. elevenSymbols (13) - Indicates that the INP value is 11 14. twelveSymbols (14) - Indicates that the INP value is 12 15. thirteenSymbols (15) - Indicates that the INP value is 13 16. fourteenSymbols (16) - Indicates that the INP value is 14 17. fifteenSymbols (17) - Indicates that the INP value is 15 18. sixteenSymbols (18) - Indicates that the INP value is 16 19. invalidValue(-1) - Invalid value
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	noProtection(1), halfSymbol(2), singleSymbol(3), twoSymbols(4), threeSymbols(5), fourSymbols(6), fiveSymbols(7), sixSymbols(8), sevenSymbols(9), eightSymbols(10), nineSymbols(11), tenSymbols(12), elevenSymbols(13), twelveSymbols(14), thirteenSymbols(15), fourteenSymbols(16), fifteenSymbols(17), sixteenSymbols(18), invalidValue(-1)

hwxdslDynamicProfCh1MaxDelayDsCfg		1.3.6.1.4.1.2011.6.31.1.30.1.13
Maximum Interleave Delay on Downstream direction. The maximum one-way interleaving delay introduced by the PMS-TC on Downstream direction. The XTUs shall choose the S (factor) and D (depth) values such that the actual one-way interleaving delay is as close as possible to, but less than or equal to, hwxdslDynamicProfCh1MaxDelayDs. The delay is coded in ms, with the value 0 indicating no delay bound is being imposed. Range: 0-200 Unit: milliseconds
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..200

hwxdslDynamicProfCh1MaxDelayUsCfg		1.3.6.1.4.1.2011.6.31.1.30.1.14
Maximum Interleave Delay on Upstream direction. The maximum one-way interleaving delay introduced by the PMS-TC on Upstream direction. The XTUs shall choose the S (factor) and D (depth) values such that the actual one-way interleaving delay is as close as possible to, but less than or equal to, hwxdslDynamicProfCh1MaxDelayUs. The delay is coded in ms, with the value 0 indicating no delay bound is being imposed. Range: 0-200 Unit: milliseconds
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..200

hwxdslDynamicProfCh2MinProtectionDsCfg		1.3.6.1.4.1.2011.6.31.1.30.1.15
Minimum Impulse Noise Protection on Downstream direction. The minimum impulse noise protection for the bearer channel, expressed in symbols. The parameter can take the following values: noProtection (i.e., INP not required), halfSymbol (i.e., INP length is 1/2 symbol) and 1-16 symbols in steps of 1 symbol. Options: 1. noProtection (1) - Indicates that the INP value is 0 2. halfSymbol (2) - Indicates that the INP value is 0.5 3. singleSymbol (3) - Indicates that the INP value is 1 4. twoSymbols (4) - Indicates that the INP value is 2 5. threeSymbols (5) - Indicates that the INP value is 3 6. fourSymbols (6) - Indicates that the INP value is 4 7. fiveSymbols (7) - Indicates that the INP value is 5 8. sixSymbols (8) - Indicates that the INP value is 6 9. sevenSymbols (9) - Indicates that the INP value is 7 10. eightSymbols (10) - Indicates that the INP value is 8 11. nineSymbols (11) - Indicates that the INP value is 9 12. tenSymbols (12) - Indicates that the INP value is 10 13. elevenSymbols (13) - Indicates that the INP value is 11 14. twelveSymbols (14) - Indicates that the INP value is 12 15. thirteenSymbols (15) - Indicates that the INP value is 13 16. fourteenSymbols (16) - Indicates that the INP value is 14 17. fifteenSymbols (17) - Indicates that the INP value is 15 18. sixteenSymbols (18) - Indicates that the INP value is 16 19. invalidValue(-1) - Invalid value
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	noProtection(1), halfSymbol(2), singleSymbol(3), twoSymbols(4), threeSymbols(5), fourSymbols(6), fiveSymbols(7), sixSymbols(8), sevenSymbols(9), eightSymbols(10), nineSymbols(11), tenSymbols(12), elevenSymbols(13), twelveSymbols(14), thirteenSymbols(15), fourteenSymbols(16), fifteenSymbols(17), sixteenSymbols(18), invalidValue(-1)

hwxdslDynamicProfCh2MinProtectionUsCfg		1.3.6.1.4.1.2011.6.31.1.30.1.16
Minimum Impulse Noise Protection on Upstream direction. The minimum impulse noise protection for the bearer channel, expressed in symbols. The parameter can take the following values: noProtection (i.e., INP not required), halfSymbol (i.e., INP length is 1/2 symbol) and 1-16 symbols in steps of 1 symbol. Options: 1. noProtection (1) - Indicates that the INP value is 0 2. halfSymbol (2) - Indicates that the INP value is 0.5 3. singleSymbol (3) - Indicates that the INP value is 1 4. twoSymbols (4) - Indicates that the INP value is 2 5. threeSymbols (5) - Indicates that the INP value is 3 6. fourSymbols (6) - Indicates that the INP value is 4 7. fiveSymbols (7) - Indicates that the INP value is 5 8. sixSymbols (8) - Indicates that the INP value is 6 9. sevenSymbols (9) - Indicates that the INP value is 7 10. eightSymbols (10) - Indicates that the INP value is 8 11. nineSymbols (11) - Indicates that the INP value is 9 12. tenSymbols (12) - Indicates that the INP value is 10 13. elevenSymbols (13) - Indicates that the INP value is 11 14. twelveSymbols (14) - Indicates that the INP value is 12 15. thirteenSymbols (15) - Indicates that the INP value is 13 16. fourteenSymbols (16) - Indicates that the INP value is 14 17. fifteenSymbols (17) - Indicates that the INP value is 15 18. sixteenSymbols (18) - Indicates that the INP value is 16 19. invalidValue(-1) - Invalid value
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	noProtection(1), halfSymbol(2), singleSymbol(3), twoSymbols(4), threeSymbols(5), fourSymbols(6), fiveSymbols(7), sixSymbols(8), sevenSymbols(9), eightSymbols(10), nineSymbols(11), tenSymbols(12), elevenSymbols(13), twelveSymbols(14), thirteenSymbols(15), fourteenSymbols(16), fifteenSymbols(17), sixteenSymbols(18), invalidValue(-1)

hwxdslDynamicProfCh2MaxDelayDsCfg		1.3.6.1.4.1.2011.6.31.1.30.1.17
Maximum Interleave Delay on Downstream direction. The maximum one-way interleaving delay introduced by the PMS-TC on Downstream direction. The XTUs shall choose the S (factor) and D (depth) values such that the actual one-way interleaving delay is as close as possible to, but less than or equal to, hwxdslDynamicProfCh2MaxDelayDs. The delay is coded in ms, with the value 0 indicating no delay bound is being imposed. Range: 0-200 Unit: milliseconds
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..200

hwxdslDynamicProfCh2MaxDelayUsCfg		1.3.6.1.4.1.2011.6.31.1.30.1.18
Maximum Interleave Delay on Upstream direction. The maximum one-way interleaving delay introduced by the PMS-TC on Upstream direction. The XTUs shall choose the S (factor) and D (depth) values such that the actual one-way interleaving delay is as close as possible to, but less than or equal to, hwxdslDynamicProfCh2MaxDelayUs. The delay is coded in ms, with the value 0 indicating no delay bound is being imposed. Range: 0-200 Unit: milliseconds
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..200

hwxdslDynamicProfPmModeCfg		1.3.6.1.4.1.2011.6.31.1.30.1.19
Power management state Enabling. Defines the power states the xTU-C or xTU-R may autonomously transition to on this line. The various bit positions are: allowTransitionsToIdle (0) and allowTransitionsToLowPower (1). A bit with a '1' value means that the xTU is allowed to transit into the respective state and a '0' value means that the xTU is not allowed to transit into the respective state.
Status: current	Access: read-create
OBJECT-TYPE
	BITS	allowTransitionsToIdle(0), allowTransitionsToLowPower(1)

hwxdslDynamicProfL0TimeCfg		1.3.6.1.4.1.2011.6.31.1.30.1.20
This minimum time (in seconds) between an exit from the L2 state and the next Entry into the L2 state. It ranges from 0 to 255 seconds. Range: 0-255
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..255

hwxdslDynamicProfL2TimeCfg		1.3.6.1.4.1.2011.6.31.1.30.1.21
This minimum time (in seconds) between an entry into the L2 state and the first power trim in the L2 state and between two consecutive power trims in the L2 State. It ranges from 0 to 255 seconds. Range: 0-255
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..255

hwxdslDynamicProfL2AtprCfg		1.3.6.1.4.1.2011.6.31.1.30.1.22
The maximum aggregate transmit power reduction (in dB) that can be performed at transition of L0 to L2 state or through a single power trim in the L2 state. It ranges from 0 dB to 31 dB. Range: 0-31 Unit: dB
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..31

hwxdslDynamicProfL2AtprtCfg		1.3.6.1.4.1.2011.6.31.1.30.1.23
The total maximum aggregate transmit power reduction (in dB) that can be performed in an L2 state. This is the sum of all reductions of L2 Request (i.e., at transition of L0 to L2 state) and power trims. Range: 0-31 Unit: dB
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..31

hwxdslDynamicProfDpboEPsdCfg		1.3.6.1.4.1.2011.6.31.1.30.1.24
This parameter defines the PSD mask that is assumed to be permitted at the exchange. This parameter shall use the same format as PSDMASKds. The maximum number of breakpoints for DPBOEPSD is 16. This is a string of 16 pairs of values in the following structure: Octets 0+1 - Index of 1st sub-carrier used in the context of a first breakpoint. Octet 2 - The PSD reduction for the sub-carrier indicated in octets 0 and 1. Octets 3-5 - Same, for a 2nd breakpoint. Octets 6-8 - Same, for a 3rd breakpoint. This architecture continues until octets 45-47, which are associated with a 16th breakpoint. Each subcarrier index is an unsigned number in the range 1 and NSCds. Each PSD reduction value is in the range 0 (0dBm/Hz) to 255 (-127.5dBm/Hz) with steps of 0.5dBm/Hz. Valid values are in the range 0 to 190 (0 to -95dBm/Hz). When the number of breakpoints is less than 16, all remaining octets are set to the value 0xff.
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(0..48)

hwxdslDynamicProfDpboEsELCfg		1.3.6.1.4.1.2011.6.31.1.30.1.25
This configuration parameter defines the assumed electrical length of cables (E-side cables) connecting exchange based DSL services to a remote flexibility point (cabinet), that hosts the xTU-C that is subject to spectrally shaped downstream power back-off depending on this length. For this parameter the electrical length is defined as the loss (in dB) of an equivalent length of hypothetical cable at a reference frequency defined by the network operator or in spectrum management regulations. DPBOESEL shall be coded as an unsigned integer representing an electrical length from 0 dB (coded as 0) to 255.5 dB (coded as 511) in steps of 0.5 dB. All values in the range are valid.If DPBOESEL is set to zero, the DPBO in this section shall be disabled. Range: 0-511 Unit: 0.5dB
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..511

hwxdslDynamicProfDpboEscmCfg		1.3.6.1.4.1.2011.6.31.1.30.1.26
This configuration parameter defines a cable model in terms of three scalars DPBOESCMA, DPBOESCMB and DPBOESCMC that shall be used to describe the frequency dependent loss of E-side cables.Parameters DPBOESCMA, DPBOESCMB, DPBOESCMC shall be coded as unsigned integers representing a scalar value from -1 (coded as 0) to 1.5 (coded as 640) in step of 1/256. All values in the range are valid. Octets 0+1 DPBOESCMA Octets 2+3 DPBOESCMB Octets 4+5 DPBOESCMC
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(0..6)

hwxdslDynamicProfDpboMusCfg		1.3.6.1.4.1.2011.6.31.1.30.1.27
DPBOMUS defines the assumed Minimum Usable receive Signal PSD (in dBm/Hz) for exchange based services, used to modify parameter DPBOFMAX defined below. It shall be coded as an unsigned integer representing a PSD level from 0 dBm/Hz (coded as 0) to -127.5 dBm/Hz (coded as 255) in steps of 0.5 dBm/Hz. All values in the range are valid. Range: 0-255 Unit: 0.5dBm/Hz
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..255

hwxdslDynamicProfDpboFMinCfg		1.3.6.1.4.1.2011.6.31.1.30.1.28
DPBOFMIN defines the minimum frequency from which the DPBO shall be applied. It shall be coded as a 16 bits unsigned integer representing a frequency in multiple of 4.3125 KHz. The range of valid values is from 0 kHz (coded as 0) to 8832 kHz (coded as 2048). Range: 0-2048 Unit: 4.3125 KHz
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..2048

hwxdslDynamicProfDpboFMaxCfg		1.3.6.1.4.1.2011.6.31.1.30.1.29
DPBOFMAX defines the maximum frequency at which DPBO may be applied. It shall be coded as a 16 bits unsigned integer representing a frequency in multiple of 4.3125 KHz. The range of valid values is from 138 kHz (coded as 32) to 29997.75 kHz (coded as 6956). Range: 32-6956 Unit: 4.3125 KHz
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	32..6956

hwxdslDynamicProfUpboPsdBandCfg		1.3.6.1.4.1.2011.6.31.1.30.1.30
This parameter defines the UPBO reference PSD used to compute the upstream power back-off for each upstream band except US0. A UPBOPSD defined for each band ahsll consist of two parameters [a, b]. Parameter a shall be coded as an unsigned 12-bit number from 40 dBm/Hz (coded as 0) to 80.95 dBm/Hz (coded as 4095) in steps of 0.01 dBm/Hz; and b shall be coded as an unsigned 12 bit number from 0 (coded as 0) to 40.95 dBm/Hz (coded as 4095) in steps of 0.01 dBm/Hz. The UPBO reference PSD at the frequency f expressed in MHz shall be equal to '-a-b(SQRT(f))'. The set of parameter values a = 40 dBm/Hz, b = 0 dBm/Hz is a special configuration to disable UPBO in the respective upstream band. Octets 0+1 - a[0] Octets 2+3 - b[0] Octets 4+5 - a[1] Octets 6+7 - b[1] Octets 8+9 - a[2] Octets 10+11 - b[2] Octets 12+13 - a[3] Octets 14+15 - b[3]
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(0..16)

hwxdslDynamicProfUpboKLFCfg		1.3.6.1.4.1.2011.6.31.1.30.1.31
This parameter is a flag that forces the VTU-R to use the electrical loop length of the CO-MIB (UPBOKL) to compute the UPBO. The value shall be forced if the flag is set to 1. Otherwise, the electrical loop length shall be autonomously selected by the VTU-O. Options: 1. forced(1) - Force the CPE to use the electrical length of the CO(UPBOKL) to compute the UPBO 2. auto(2) - Electrical length shall be autonomously selected by the CO 3. invalidValue(-1) - Invalid value
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	forced(1), auto(2), invalidValue(-1)

hwxdslDynamicProfUpboKLCfg		1.3.6.1.4.1.2011.6.31.1.30.1.32
This parameter defines the electrical loop length expressed in dB at 1MHz, kl0, configured by the CO-MIB. The value shall be coded as an unsigned 16 bit number in the range 0 (coded as 0) to 128 dB (coded as 1280) in steps of 0.1 dB. Range: 0-1280 Unit: 0.1 dB
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..1280

hwxdslDynamicProfRfiBandsCfg		1.3.6.1.4.1.2011.6.31.1.30.1.33
The subset of PSD mask breakpoints that shall be used to notch an RFI band. It is a string of bands consist of begin tone index and end tone index. for example :0-10,20-50,100-4095 It can contain as most as 16 bands.
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(0..159)

hwxdslDynamicProfToneBlackOutCfg		1.3.6.1.4.1.2011.6.31.1.30.1.34
The subset of subcarriermask that shall be used to mask the subcarriers. It is a string of bands consist of begin tone index and end tone index. For example :0-10,20-50,100-4095. It can contain as most as 8 bands.
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(0..79)

hwxdslDynamicProfCarMaskDSCfg		1.3.6.1.4.1.2011.6.31.1.30.1.35
Sub-carriers mask. A bitmap of 512 bits that allows masking up to 512 downstream sub-carriers, depending on NSCds. If bit i (0 <= i < NSCds) is set to '1', the respective downstream sub-carrier i is masked, and if set to '0', the respective sub-carrier is unmasked. Note that there should always be unmasked sub-carriers (i.e., the object cannot be all 1's). Also note that if NSCds < 512, all bits i (NSCds i <= 512) should be set to '1'.
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(0..64)

hwxdslDynamicProfCarMaskUSCfg		1.3.6.1.4.1.2011.6.31.1.30.1.36
Sub-carriers mask. A bitmap of 64 bits that allows masking up to 64 downstream sub-carriers, depending on NSCds. If bit i (0 <= i < NSCus) is set to '1', the respective upstream sub-carrier i is masked, and if set to '0', the respective sub-carrier is unmasked. Note that there should always be unmasked sub-carriers (i.e., the object cannot be all 1's). Also note that if NSCus < 64, all bits i (NSCus < i <= 64) should be set to '1'.
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(0..8)

hwxdslDynamicProfXdslModeCfg		1.3.6.1.4.1.2011.6.31.1.30.1.37
The xDSL mode is a way of categorizing the various XDSL transmission modes into groups, each group (XDSL Mode) shares the same PSD configuration. Options: 1. defMode (1) - XDSL transmit mode is defMode 2. adsl (2) - XDSL transmit mode is adsl 3. adsl2Pots (3) - XDSL transmit mode is adsl2Pots 4. adsl2Isdn (4) - XDSL transmit mode is adsl2Isdn 5. adsl2PlusPots (5) - XDSL transmit mode is adsl2PlusPots 6. adsl2PlusIsdn (6) - XDSL transmit mode is adsl2PlusIsdn 7. adsl2ReachExtended (7) - XDSL transmit mode is adsl2ReachExtended 8. g9923PotsNonOverlapped(8) - XDSL transmit mode is g9923PotsNonOverlapped 9. g9923PotsOverlapped(9) - XDSL transmit mode is g9923PotsOverlapped 10. g9923IsdnNonOverlapped(10) - XDSL transmit mode is g9923IsdnNonOverlapped 11. g9923isdnOverlapped(11) - XDSL transmit mode is g9923isdnOverlapped 12. g9924potsNonOverlapped(14) - XDSL transmit mode is g9924potsNonOverlapped 13. g9924potsOverlapped(15) - XDSL transmit mode is g9924potsOverlapped 14. g9923AnnexIAllDigNonOverlapped(18) - XDSL transmit mode is g9923AnnexIAllDigNonOverlapped 15. g9923AnnexIAllDigOverlapped(19) - XDSL transmit mode is g9923AnnexIAllDigOverlapped 16. g9923AnnexJAllDigNonOverlapped(20) - XDSL transmit mode is g9923AnnexJAllDigNonOverlapped 17. g9923AnnexJAllDigOverlapped(21) - XDSL transmit mode is g9923AnnexJAllDigOverlapped 18. g9924AnnexIAllDigNonOverlapped(22) - XDSL transmit mode is g9924AnnexIAllDigNonOverlapped 19. g9924AnnexIAllDigOverlapped(23) - XDSL transmit mode is g9924AnnexIAllDigOverlapped 20. g9923AnnexLMode1NonOverlapped(24) - XDSL transmit mode is g9923AnnexLMode1NonOverlapped 21. g9923AnnexLMode2NonOverlapped(25) - XDSL transmit mode is g9923AnnexLMode2NonOverlapped 22. g9923AnnexLMode3Overlapped(26) - XDSL transmit mode is g9923AnnexLMode3Overlapped 23. g9923AnnexLMode4Overlapped(27) - XDSL transmit mode is g9923AnnexLMode4Overlapped 24. g9923AnnexMPotsNonOverlapped(28) - XDSL transmit mode is g9923AnnexMPotsNonOverlapped 25. g9923AnnexMPotsOverlapped(29) - XDSL transmit mode is g9923AnnexMPotsOverlapped 26. g9925PotsNonOverlapped(30) - XDSL transmit mode is g9925PotsNonOverlapped 27. g9925PotsOverlapped(31) - XDSL transmit mode is g9925PotsOverlapped 28. g9925IsdnNonOverlapped(32) - XDSL transmit mode is g9925IsdnNonOverlapped 29. g9925isdnOverlapped(33) - XDSL transmit mode is g9925isdnOverlapped 30. g9925AnnexIAllDigNonOverlapped(36) - XDSL transmit mode is g9925AnnexIAllDigNonOverlapped 31. g9925AnnexIAllDigOverlapped(37) - XDSL transmit mode is g9925AnnexIAllDigOverlapped 32. g9925AnnexJAllDigNonOverlapped(38) - XDSL transmit mode is g9925AnnexJAllDigNonOverlapped 33. g9925AnnexJAllDigOverlapped(39) - XDSL transmit mode is g9925AnnexJAllDigOverlapped 34. g9925AnnexMPotsNonOverlapped(40) - XDSL transmit mode is g9925AnnexMPotsNonOverlapped 35. g9925AnnexMPotsOverlapped(41) - XDSL transmit mode is g9925AnnexMPotsOverlapped 36. vdsl2Pots (42) - XDSL transmit mode is vdsl2Pots 37. vdsl2Isdn (43) - XDSL transmit mode is vdsl2Isdn 38. invalidValue(-1) - Invalid value
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	defMode(1), adsl(2), adsl2Pots(3), adsl2Isdn(4), adsl2PlusPots(5), adsl2PlusIsdn(6), adsl2ReachExtended(7), g9923PotsNonOverlapped(8), g9923PotsOverlapped(9), g9923IsdnNonOverlapped(10), g9923isdnOverlapped(11), g9924potsNonOverlapped(14), g9924potsOverlapped(15), g9923AnnexIAllDigNonOverlapped(18), g9923AnnexIAllDigOverlapped(19), g9923AnnexJAllDigNonOverlapped(20), g9923AnnexJAllDigOverlapped(21), g9924AnnexIAllDigNonOverlapped(22), g9924AnnexIAllDigOverlapped(23), g9923AnnexLMode1NonOverlapped(24), g9923AnnexLMode2NonOverlapped(25), g9923AnnexLMode3Overlapped(26), g9923AnnexLMode4Overlapped(27), g9923AnnexMPotsNonOverlapped(28), g9923AnnexMPotsOverlapped(29), g9925PotsNonOverlapped(30), g9925PotsOverlapped(31), g9925IsdnNonOverlapped(32), g9925isdnOverlapped(33), g9925AnnexIAllDigNonOverlapped(36), g9925AnnexIAllDigOverlapped(37), g9925AnnexJAllDigNonOverlapped(38), g9925AnnexJAllDigOverlapped(39), g9925AnnexMPotsNonOverlapped(40), g9925AnnexMPotsOverlapped(41), vdsl2Pots(42), vdsl2Isdn(43), invalidValue(-1)

hwxdslDynamicProfMaxNomPsdDsCfg		1.3.6.1.4.1.2011.6.31.1.30.1.38
The maximum nominal transmit PSD in the downstream direction during initialization and show time. It ranges from -600 to -300 units of 0.1 dBm/Hz(physical values are -60 to -30 dBm/Hz). The invalid value is -1. If data is invalid, the invalid value will be returned. Unit: 0.1 dB
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	-600..-300 | -1

hwxdslDynamicProfMaxNomPsdUsCfg		1.3.6.1.4.1.2011.6.31.1.30.1.39
The maximum nominal transmit PSD in the upstream direction during initialization and show time. It ranges from -600 to -300 units of 0.1 dBm/Hz(physical values are -60 to -30 dBm/Hz). The invalid value is -1. If data is invalid, the invalid value will be returned. Unit: 0.1 dB
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	-600..-300 | -1

hwxdslDynamicProfMaxNomAtpDsCfg		1.3.6.1.4.1.2011.6.31.1.30.1.40
The maximum nominal aggregate transmit power in the downstream direction during initialization and show time. It ranges from 0 to 255 units of 0.1 dBm (physical values are 0 to 25.5 dBm). Range: 0-255 Unit: 0.1 dBm
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..255

hwxdslDynamicProfMaxNomAtpUsCfg		1.3.6.1.4.1.2011.6.31.1.30.1.41
The maximum nominal aggregate transmit power in the upstream direction during initialization and show time. It ranges from 0 to 255 units of 0.1 dBm (physical values are 0 to 25.5 dBm). Range: 0-255 Unit: 0.1 dBm
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..255

hwxdslDynamicProfPsdMaskDsCfg		1.3.6.1.4.1.2011.6.31.1.30.1.42
This configuration parameter defines the downstream PSD mask applicable at the U C2 reference point. This MIB PSD mask may impose PSD restrictions in addition to the Limit PSD mask defined in the relevant Recommendation (e.g., G.992.5, G.993.2). This is a string of 32 pairs of values in the following structure: Octets 0+1 - Index of 1st sub-carrier used in the context of a first breakpoint. Octet 2 - The PSD reduction for the sub-carrier indicated in octets 0 and 1. Octets 3-5 - Same, for a 2nd breakpoint. Octets 6-8 - Same, for a 3rd breakpoint. This architecture continues until octets 94-95, which are associated with a 32nd breakpoint. Each subcarrier index is an unsigned number in the range 0 and (NSCds - 1). Each PSD reduction value is in the range 0 (0dBm/Hz) to 255 (-127.5dBm/Hz) with steps of 0.5dBm/Hz. Valid values are in the range 0 to 190 (0 to -95dBm/Hz). When the number of breakpoints is less than 32, all remaining octets are set to the value 0xff. Note that the content of this object should be correlated with the sub-carriers mask and with the RFI setup.
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(0..96)

hwxdslDynamicProfPsdMaskUsCfg		1.3.6.1.4.1.2011.6.31.1.30.1.43
This configuration parameter defines the upstream PSD mask applicable at the U R2 reference point. This MIB PSD mask may impose PSD restrictions in addition to the Limit PSD mask defined in the relevant Recommendations (e.g., ITU-T Recommendations G.992.3, G.993.2). This is a string of 16 pairs of values in the following structure: Octets 0+1 - Index of 1st sub-carrier used in the context of a first breakpoint. Octet 2 - The PSD reduction for the sub-carrier indicated in octets 0 and 1. Octets 3-5 - Same, for a 2nd breakpoint. Octets 45-47 - Same, for a 3rd breakpoint. This architecture continues until octets 45-47, which are associated with a 16th breakpoint. Each subcarrier index is an unsigned number in the range 0 and (NSCus - 1). Each PSD reduction value is in the range 0 (0dBm/Hz) to 255 (-127.5dBm/Hz) with steps of 0.5dBm/Hz. Valid values are in the range 0 to 190 (0 to -95dBm/Hz). When the number of breakpoints is less than 16, all remaining octets are set to the value 0xff. Note that the content of this object should be correlated with the sub-carriers mask and with the RFI setup.
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(0..48)

hwxdslDynamicProfLimitMaskCfg		1.3.6.1.4.1.2011.6.31.1.30.1.44
This configuration parameter contains the G.993.2 profiles to be allowed by the near-end xTU on this line. Options: 1. profile8a (1) - The G.993.2 profile is profile8a 2. profile8b (2) - The G.993.2 profile is profile8b 3. profile8c (3) - The G.993.2 profile is profile8c 4. profile8d (4) - The G.993.2 profile is profile8d 5. profile12a (5) - The G.993.2 profile is profile12a 6. profile12b (6) - The G.993.2 profile is profile12b 7. profile17a (7) - The G.993.2 profile is profile17a 8. profile30a (8) - The G.993.2 profile is profile30a 9. invalidValue(-1) - Invalid value
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	profile8a(1), profile8b(2), profile8c(3), profile8d(4), profile12a(5), profile12b(6), profile17a(7), profile30a(8), invalidValue(-1)

hwxdslDynamicProfClassMaskCfg		1.3.6.1.4.1.2011.6.31.1.30.1.45
In order to reduce the number of configuration possibilities, the limit PSD masks are grouped in the following PSD mask classes: Options: 1. annexA998-D-32(1) - Class 998 Annex A: D-32, D-64, D-48, D-128 2. annexA998-D-64(2) - Class 998 Annex A: D-32, D-64, D-48, D-128 3. annexB997-M1c-A-7(3) - Class 997-M1c Annex B: 997-M1c-A-7 4. annexB997-M1x-M-8(4) - Class 997-M1x Annex B: 997-M1x-M-8, 997-M1x-M 5. annexB997-M1x-M(5) - Class 997-M1x Annex B: 997-M1x-M-8, 997-M1x-M 6. annexB997-M2x-M-8(6) - Class 997-M2x Annex B: 997-M2x-M-8, 997-M2x-A, 997-M2x-M 7. annexB997-M2x-A(7) - Class 997-M2x Annex B: 997-M2x-M-8, 997-M2x-A, 997-M2x-M 8. annexB997-M2x-M(8) - Class 997-M2x Annex B: 997-M2x-M-8, 997-M2x-A, 997-M2x-M 9. annexB998-M1x-A(9) - Class 998-M1x Annex B: 998-M1x-A, 998-M1x-B, 998-M1x-NUS0 10. annexB998-M1x-B(10) - Class 998-M1x Annex B: 998-M1x-A, 998-M1x-B, 998-M1x-NUS0 11. annexB998-M1x-NUS0(11) - Class 998-M1x Annex B: 998-M1x-A, 998-M1x-B, 998-M1x-NUS0 12. annexB998-M2x-A(12) - Class 998-M2x Annex B: 998-M2x-A, 998-M2x-M, 998-M2x-B, 998-M2x-NUS0 13. annexB998-M2x-M(13) - Class 998-M2x Annex B: 998-M2x-A, 998-M2x-M, 998-M2x-B, 998-M2x-NUS0 14. annexB998-M2x-B(14) - Class 998-M2x Annex B: 998-M2x-A, 998-M2x-M, 998-M2x-B, 998-M2x-NUS0 15. annexB998-M2x-NUS0(15) - Class 998-M2x Annex B: 998-M2x-A, 998-M2x-M, 998-M2x-B, 998-M2x-NUS0 16. annexBHPE17-M1(16) - Class HPE17 Annex B: HPE17-M1 17. annexBHPE30-M1(17) - Class HPE30 Annex B: HPE30-M1 18. annexB997E17-M2x-A(18) - Class 997E17-M2x Annex B: 997E17-M2x-A 19. annexB997E30-M2x-NUS0(19) - Class 997E30-M2x Annex B: 997E30-M2x-NUS0 20. annexB998E17-M2x-NUS0(20) - Class 998E17-M2x Annex B: 998E17-M2x-NUS0, 998E17-M2x-NUS0-M 21. annexB998E17-M2x-NUS0-M(21) - Class 998E17-M2x Annex B: 998E17-M2x-NUS0, 998E17-M2x-NUS0-M 22. annexB998ADE17-M2x-NUS0-M(22) - Class 998ADE17-M2x Annex B: 998ADE17-M2x-NUS0-M, 998ADE17-M2x-A, 998ADE17-M2x-B, 998ADE17-M2x-M. 23. annexB998ADE17-M2x-B(23) - Class 998ADE17-M2x Annex B: 998ADE17-M2x-NUS0-M, 998ADE17-M2x-A, 998ADE17-M2x-B, 998ADE17-M2x-M. 24. annexB998E30-M2x-NUS0(24) - Class 998E30-M2x Annex B: 998E30-M2x-NUS0, 998E30-M2x-NUS0-M 25. annexB998E30-M2x-NUS0-M(25) - Class 998E30-M2x Annex B: 998E30-M2x-NUS0, 998E30-M2x-NUS0-M 26. annexB998ADE30-M2x-NUS0-M(26) - Class 998ADE30-M2x Annex B: 998ADE30-M2x-NUS0-M, 998ADE30-M2x-NUS0-A 27. annexB998ADE17-M2x-A(27) - Class 998ADE17-M2x Annex B: 998ADE17-M2x-NUS0-M, 998ADE17-M2x-A, 998ADE17-M2x-B, 998ADE17-M2x-M. 28. annexB998ADE30-M2x-NUS0-A(28) - Class 998ADE30-M2x Annex B: 998ADE30-M2x-NUS0-M, 998ADE30-M2x-NUS0-A 29. annexA998-D-48(29) - Class 998 Annex A: D-32, D-64, D-48, D-128 30. annexA998-D-128(30) - Class 998 Annex A: D-32, D-64, D-48, D-128 31. annexB998ADE17-M2x-M(31) - Class 998ADE17-M2x Annex B: 998ADE17-M2x-NUS0-M, 998ADE17-M2x-A, 998ADE17-M2x-B, 998ADE17-M2x-M. 32. invalidValue(-1) - Invalid value
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	annexA998-D-32(1), annexA998-D-64(2), annexB997-M1c-A-7(3), annexB997-M1x-M-8(4), annexB997-M1x-M(5), annexB997-M2x-M-8(6), annexB997-M2x-A(7), annexB997-M2x-M(8), annexB998-M1x-A(9), annexB998-M1x-B(10), annexB998-M1x-NUS0(11), annexB998-M2x-A(12), annexB998-M2x-M(13), annexB998-M2x-B(14), annexB998-M2x-NUS0(15), annexBHPE17-M1(16), annexBHPE30-M1(17), annexB997E17-M2x-A(18), annexB997E30-M2x-NUS0(19), annexB998E17-M2x-NUS0(20), annexB998E17-M2x-NUS0-M(21), annexB998ADE17-M2x-NUS0-M(22), annexB998ADE17-M2x-B(23), annexB998E30-M2x-NUS0(24), annexB998E30-M2x-NUS0-M(25), annexB998ADE30-M2x-NUS0-M(26), annexB998ADE17-M2x-A(27), annexB998ADE30-M2x-NUS0-A(28), annexA998-D-48(29), annexA998-D-128(30), annexB998ADE17-M2x-M(31), invalidValue(-1)

hwxdslDynamicProfBandOptUsageCfg		1.3.6.1.4.1.2011.6.31.1.30.1.46
Defines the VDSL link use of the optional frequency range [25kHz - 138kHz] (Opt). Options: 1. disable(1) - Indicates Opt is unused 2. enable(2) - Indicates Opt usage is for upstream 3. invalidValue(-1) - Invalid value Huawei defined.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	disable(1), enable(2), invalidValue(-1)

hwxdslDynamicProfVirtualNoiseModeDsCfg		1.3.6.1.4.1.2011.6.31.1.30.1.47
Defines the Virtual Noise of downsteam. Options: 1. disable(1) -unused 2. enable(2) -used 3. invalidValue(-1) -invalid Value Huawei defined.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	disable(1), enable(2), invalidValue(-1)

hwxdslDynamicProfVirtualNoiseModeUsCfg		1.3.6.1.4.1.2011.6.31.1.30.1.48
Defines the Virtual Noise of upstream. Options: 1. disable(1) -unused 2. enable(2) -used 3. invalidValue(-1) -invalid Value Huawei defined.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	disable(1), enable(2), invalidValue(-1)

hwxdslDynamicProfVirtualNoiseDsCfg		1.3.6.1.4.1.2011.6.31.1.30.1.49
The Virtual Noise of downsteam. This is a string of 32 pairs of values in the following structure: Octets 0+1 - Index of 1st sub-carrier used in the context of a first breakpoint. Octet 2 - The PSD reduction for the sub-carrier indicated in octets 0 and 1. Octets 3-5 - Same, for a 2nd breakpoint. Octets 6-8 - Same, for a 3rd breakpoint. This architecture continues until octets 94-95, which are associated with a 32nd breakpoint. Each subcarrier index is an unsigned number in the range 0 and (NSCds - 1). Each PSD reduction value is in the range 0 (0dBm/Hz) to 255 (127.5dBm/Hz) with steps of 0.5dBm/Hz.
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(0..96)

hwxdslDynamicProfVirtualNoiseUsCfg		1.3.6.1.4.1.2011.6.31.1.30.1.50
The Virtual Noise of upsteam. This is a string of 16 pairs of values in the following structure: Octets 0+1 - Index of 1st sub-carrier used in the context of a first breakpoint. Octet 2 - The PSD reduction for the sub-carrier indicated in octets 0 and 1. Octets 3-5 - Same, for a 2nd breakpoint. Octets 6-8 - Same, for a 3rd breakpoint. This architecture continues until octets 45-47, which are associated with a 16th breakpoint. Each subcarrier index is an unsigned number in the range 0 and (NSCds - 1). Each PSD reduction value is in the range 0 (0dBm/Hz) to 255 (127.5dBm/Hz) with steps of 0.5dBm/Hz.
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(0..48)

hwxdslDynamicProfRowStatusCfg		1.3.6.1.4.1.2011.6.31.1.30.1.51
This object is used to create a new row or to modify or delete an existing row in this table. A profile is activated by setting this object to 'active'. When 'active' is set, the system will validate the profile. Before a profile can be deleted or taken out of service (by setting this object to 'destroy' or 'outOfService'), it must be first unreferenced from all associated templates.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

hwXdslPortIopCaptureInfoTable		1.3.6.1.4.1.2011.6.31.1.31
The table hwXdslPortIopCaptureInfoTable implement xDSL port IOP information capture. The index of this table is ifIndex.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HwXdslPortIopCaptureInfoEntry

hwXdslPortIopCaptureInfoEntry		1.3.6.1.4.1.2011.6.31.1.31.1
The table hwXdslPortIopCaptureInfoTable implement xDSL port IOP information capture. The index of this entry is ifIndex.
Status: current	Access: not-accessible
OBJECT-TYPE
	HwXdslPortIopCaptureInfoEntry

hwXdslPortIopCaptureOperTypeCfg		1.3.6.1.4.1.2011.6.31.1.31.1.1
Start or stop IOP information capture of xDSL port. Options: 1. start(1) - Start IOP information capture of xDSL port 2. stop(2) - Stop IOP information capture of xDSL port 3. invalid(-1) - Invalid value
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	start(1), stop(2), invalid(-1)

hwXdslPortIopCaptureOperStatusInfo		1.3.6.1.4.1.2011.6.31.1.31.1.2
Port IOP capture status Options: 1. noCapture(1) - Indicates that the capture is not performed 2. capturing(2) - Indicates that the capture is being performed 3. iop-generate(3) - Indicates that the IOP file is generated 4. captured(4) - Indicates that the capture is completed 5. invalid(-1) - Invalid value
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	noCapture(1), capturing(2), iop-generate(3), captured(4), invalid(-1)

hwXdslDynamicInfoCollectInfoTable		1.3.6.1.4.1.2011.6.31.1.32
The table hwXdslDynamicInfoCollectTable implement xDSL port Dynamic information collect. The indexes of this table are hwFrameIndex and hwSlotIndex.
Status: deprecated	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HwXdslDynamicInfoCollectInfoEntry

hwXdslDynamicInfoCollectInfoEntry		1.3.6.1.4.1.2011.6.31.1.32.1
The table hwXdslDynamicInfoCollectTable implement xDSL port Dynamic information collect. The indexes of this entry are hwFrameIndex and hwSlotIndex.
Status: deprecated	Access: not-accessible
OBJECT-TYPE
	HwXdslDynamicInfoCollectInfoEntry

hwXdslDynamicInfoCollectInfo		1.3.6.1.4.1.2011.6.31.1.32.1.1
Start Dynamic information collecting of xDSL port. Options: 1. start(1) - Indicates the collecting starts 2. invalid(-1) - Invalid value
Status: deprecated	Access: read-write
OBJECT-TYPE
	INTEGER	start(1), invalid(-1)

hwXdslDynamicInfoCollectStatusInfo		1.3.6.1.4.1.2011.6.31.1.32.1.2
Board Dynamic information collecting status. Options: 1. noCollect(1) - Indicates that collecting data is not performed 2. collecting(2) - Indicates that collecting data is being performed 3. collected(3) - Indicates that collecting data is complete
Status: deprecated	Access: read-only
OBJECT-TYPE
	INTEGER	noCollect(1), collecting(2), collected(3)

hwXdslDynamicInfoCollectTimeInfo		1.3.6.1.4.1.2011.6.31.1.32.1.3
Time at which collecting the optimization information is complete.
Status: deprecated	Access: read-only
OBJECT-TYPE
	DateAndTime

hwXdslDynamicInfoCollectPortList		1.3.6.1.4.1.2011.6.31.1.32.1.4
This object defines the operating port list of certain xDSL board. Each bit of this string specifies a port. If that bit has a value of '1', then that port is included in the set of ports; the port is not included if its bit has a value of '0'. For example, if 0xFE is set to this node, then port 0 to port 6 will start collection. If this node is not configed, collection will be started on all ports of the board.
Status: deprecated	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(0..16)

hwadslAturPerfDataInfoTable		1.3.6.1.4.1.2011.6.31.1.33
This table provides one row for each ATUR. ADSL physical interfaces are those ifEntries where ifType is equal to adsl(94). The index of this table is ifIndex.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HwadslAturPerfDataInfoEntry

hwadslAturPerfDataInfoEntry		1.3.6.1.4.1.2011.6.31.1.33.1
This table provides one row for each ATUR. ADSL physical interfaces are those ifEntries where ifType is equal to adsl(94). The index of this entry is ifIndex.
Status: current	Access: not-accessible
OBJECT-TYPE
	HwadslAturPerfDataInfoEntry

hwAdslAturPerfCurr15MStartTime		1.3.6.1.4.1.2011.6.31.1.33.1.1
Start time of the current 15-minute performance statistics.
Status: current	Access: read-only
OBJECT-TYPE
	DateAndTime

hwAdslAturPerfCurr1DayStartTime		1.3.6.1.4.1.2011.6.31.1.33.1.2
Start time of the current 1-day performance statistics.
Status: current	Access: read-only
OBJECT-TYPE
	DateAndTime

hwAdslAturPerfCurr15MInmainpeq		1.3.6.1.4.1.2011.6.31.1.33.1.3
This parameter is a count of the INMAINPEQi anomalies occurring on the line during current 15 minutes. Each INMAINPEQ needs 4 bytes.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..68)

hwAdslAturPerfCurr15MInmame		1.3.6.1.4.1.2011.6.31.1.33.1.4
This parameter is a count of the INMAME anomalies occurring on the line during current 15 minutes.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwAdslAturPerfCurr15MInmaiat		1.3.6.1.4.1.2011.6.31.1.33.1.5
This parameter is a count of the INMAIATi anomalies occurring on the line during current 15 minutes. Each INMAIAT needs 4 bytes.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..32)

hwAdslAturPerfCurr1DayInmainpeq		1.3.6.1.4.1.2011.6.31.1.33.1.6
This parameter is a count of the INMAINPEQi anomalies occurring on the line during current 1 day. Each INMAINPEQ needs 4 bytes.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..68)

hwAdslAturPerfCurr1DayInmame		1.3.6.1.4.1.2011.6.31.1.33.1.7
This parameter is a count of the INMAME anomalies occurring on the line during current 1 day.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwAdslAturPerfCurr1DayInmaiat		1.3.6.1.4.1.2011.6.31.1.33.1.8
This parameter is a count of the INMAIATi anomalies occurring on the line during current 1 day. Each INMAIAT needs 4 bytes.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..32)

hwAdslAturPerfPre1DayInmainpeq		1.3.6.1.4.1.2011.6.31.1.33.1.9
This parameter is a count of the INMAINPEQi anomalies occurring on the line during the most recent previous 1-day period. Each INMAINPEQ needs 4 bytes.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..68)

hwAdslAturPerfPre1DayInmame		1.3.6.1.4.1.2011.6.31.1.33.1.10
This parameter is a count of the INMAME anomalies occurring on the line during the most recent previous 1-day period.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwAdslAturPerfPre1DayInmaiat		1.3.6.1.4.1.2011.6.31.1.33.1.11
This parameter is a count of the INMAIATi anomalies occurring on the line during the most recent previous 1-day period. Each INMAIAT needs 4 bytes.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..32)

hwAdslAturPerfCurrEverBeforeInmainpeq		1.3.6.1.4.1.2011.6.31.1.33.1.12
This parameter is a count of the INMAINPEQi anomalies occurring on the line ever before. Each INMAINPEQ needs 4 bytes.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..68)

hwAdslAturPerfCurrEverBeforeInmame		1.3.6.1.4.1.2011.6.31.1.33.1.13
This parameter is a count of the INMAME anomalies occurring on the line ever before.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwAdslAturPerfCurrEverBeforeInmaiat		1.3.6.1.4.1.2011.6.31.1.33.1.14
This parameter is a count of the INMAIATi anomalies occurring on the line ever before. Each INMAIAT needs 4 bytes.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..32)

hwAdslAturPerfCurr15MLeftrs		1.3.6.1.4.1.2011.6.31.1.33.1.15
If retransmission is used in a given transmit direction, this parameter is a count of the seconds with a far-end leftr defect present observed over the current 15 minutes accumulation period.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwAdslAturPerfCurr15MEfb		1.3.6.1.4.1.2011.6.31.1.33.1.16
If retransmission is used in a given transmit direction, this parameter is a count of the number of error-free bits observed over the current 15 minutes accumulation period. The far-end counter is only defined in downstream.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwAdslAturPerfCurr15MMinEftr		1.3.6.1.4.1.2011.6.31.1.33.1.17
If retransmission is used in a given transmit direction, this parameter MINEFTR reports the minimum of the EFTR(Error-free throughput rate) observed over the current 15 minutes accumulation period. The far-end value is only defined in downstream.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwAdslAturPerfCurr1DayLeftrs		1.3.6.1.4.1.2011.6.31.1.33.1.18
If retransmission is used in a given transmit direction, this parameter is a count of the seconds with a far-end leftr defect present observed over the current 24 hours accumulation period.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwAdslAturPerfCurr1DayEfb		1.3.6.1.4.1.2011.6.31.1.33.1.19
If retransmission is used in a given transmit direction, this parameter is a count of the number of error-free bits current observed over the current 24 hours accumulation period. The far-end counter is only defined in downstream.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwAdslAturPerfCurr1DayMinEftr		1.3.6.1.4.1.2011.6.31.1.33.1.20
If retransmission is used in a given transmit direction, this parameter MINEFTR reports the minimum of the EFTR(Error-free throughput rate) observed over the current 24 hours accumulation period. The far-end value is only defined in downstream.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwAdslAturPerfPrev1DayLeftrs		1.3.6.1.4.1.2011.6.31.1.33.1.21
If retransmission is used in a given transmit direction, this parameter is a count of the seconds with a far-end leftr defect present over the previous 24 hours accumulation period during this interval.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwAdslAturPerfPrev1DayEfb		1.3.6.1.4.1.2011.6.31.1.33.1.22
If retransmission is used in a given transmit direction, this parameter is a count of the number of error-free bits observed over the previous 24 hours accumulation period during this interval. The far-end counter is only defined in downstream.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwAdslAturPerfPrev1DayMinEftr		1.3.6.1.4.1.2011.6.31.1.33.1.23
If retransmission is used in a given transmit direction, this parameter MINEFTR reports the minimum of the EFTR(Error-free throughput rate) observed over the previous 24 hours accumulation period during this interval. The far-end value is only defined in downstream.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwAdslAturPerfCurrEverBeforeLeftrs		1.3.6.1.4.1.2011.6.31.1.33.1.24
If retransmission is used in a given transmit direction, this parameter is a count of the seconds with a far-end leftr defect present observed ever before.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwAdslAturPerfCurrEverBeforeEfb		1.3.6.1.4.1.2011.6.31.1.33.1.25
If retransmission is used in a given transmit direction, this parameter is a count of the number of error-free bits observed ever before. The far-end counter is only defined in downstream.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwAdslAturPerfCurrEverBeforeMinEftr		1.3.6.1.4.1.2011.6.31.1.33.1.26
If retransmission is used in a given transmit direction, this parameter MINEFTR reports the minimum of the EFTR(Error-free throughput rate) observed ever before. The far-end value is only defined in downstream.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwadslAturIntervalInfoTable		1.3.6.1.4.1.2011.6.31.1.34
This table provides one row for each Atur performance data collection interval. ADSL physical interfaces are those ifEntries where ifType is equal to adsl(94). The indexes of this table are ifIndex and adslAturIntervalNumber.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HwadslAturIntervalInfoEntry

hwadslAturIntervalInfoEntry		1.3.6.1.4.1.2011.6.31.1.34.1
This table provides one row for each Atur performance data collection interval. ADSL physical interfaces are those ifEntries where ifType is equal to adsl(94). The indexes of this entry are ifIndex and adslAturIntervalNumber.
Status: current	Access: not-accessible
OBJECT-TYPE
	HwadslAturIntervalInfoEntry

hwAdslAturIntervalStartTime		1.3.6.1.4.1.2011.6.31.1.34.1.1
Start time of the historical 15-minute performance statistics.
Status: current	Access: read-only
OBJECT-TYPE
	DateAndTime

hwAdslAturIntervalInmainpeq		1.3.6.1.4.1.2011.6.31.1.34.1.2
This parameter is a count of the INMAINPEQi anomalies occurring on the line at 15 minutes interval. Each INMAINPEQ needs 4 bytes.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..68)

hwAdslAturIntervalInmame		1.3.6.1.4.1.2011.6.31.1.34.1.3
This parameter is a count of the INMAME anomalies occurring on the line at 15 minutes interval.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwAdslAturIntervalInmaiat		1.3.6.1.4.1.2011.6.31.1.34.1.4
This parameter is a count of the INMAIATi anomalies occurring on the line at 15 minutes interval. Each INMAIAT needs 4 bytes.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..32)

hwAdslAturIntervalLeftrs		1.3.6.1.4.1.2011.6.31.1.34.1.5
If retransmission is used in a given transmit direction, this parameter is a count of the seconds with a far-end leftr defect present observed over the previous 15 minutes accumulation period during the interval.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwAdslAturIntervalEfb		1.3.6.1.4.1.2011.6.31.1.34.1.6
If retransmission is used in a given transmit direction, this parameter is a count of the number of error-free bits observed over the previous 15 minutes accumulation period during the interval. The far-end counter is only defined in downstream.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwAdslAturIntervalMinEftr		1.3.6.1.4.1.2011.6.31.1.34.1.7
If retransmission is used in a given transmit direction, this parameter MINEFTR reports the minimum of the EFTR(Error-free throughput rate) observed over the 15 minutes accumulation period during the interval. The far-end value is only defined in downstream.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hwAdslTrapsVbOids		1.3.6.1.4.1.2011.6.31.3
OBJECT IDENTIFIER

hwadslPMThresholdItem		1.3.6.1.4.1.2011.6.31.3.0
Indicates the threshold item.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	OCTET STRING	Size(0..1024)

hwadslChipsetID		1.3.6.1.4.1.2011.6.31.3.1
The chipset id of the board.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	Integer32

hwAdslRequestID		1.3.6.1.4.1.2011.6.31.3.2
RequestID.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	Integer32

hwadslSeltTestStartResult		1.3.6.1.4.1.2011.6.31.3.3
ADSL selt test start result. Options: 1. normal - A message is returned indicating that the SELT is successful. 2. failed - A message is returned indicating that the SELT fails.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	Integer32

hwADSLProfOperType		1.3.6.1.4.1.2011.6.31.3.4
ADSL profile operate type. Options: 1.add(1) - Add an ADSL profile 2.modify(2) - Modify an ADSL profile 3.delete(3) - Delete an ADSL profile
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	INTEGER	add(1), modify(2), delete(3)

hwadslLinePMThresholdValue		1.3.6.1.4.1.2011.6.31.3.5
Indicate the threshold value of threshold item.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	Integer32

hwadslLinePMCurrentValue		1.3.6.1.4.1.2011.6.31.3.6
Indicate the current value of threshold item.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	Integer32

hwAdslExtTraps		1.3.6.1.4.1.2011.6.31.2
OBJECT IDENTIFIER

hwAdslCommonTraps		1.3.6.1.4.1.2011.6.31.2.1
OBJECT IDENTIFIER

hwAdslCommonTrapsPrefix		1.3.6.1.4.1.2011.6.31.2.1.0
OBJECT IDENTIFIER

hwAdslPortActRateMonitorInfoTrap		1.3.6.1.4.1.2011.6.31.2.1.0.1
If ADSL act rate is lower than threshold, hwTrapType is 1. Otherwise, hwTrapType is 2. This trap message is generated when the ADSL port rate fails to meet the requirement.
Status: current	Access: accessible-for-notify
NOTIFICATION-TYPE

hwAdslPortRateChangeInfoTrap		1.3.6.1.4.1.2011.6.31.2.1.0.2
ADSL act rate is change trap. This trap message is generated when the ADSL port rate changed.
Status: current	Access: accessible-for-notify
NOTIFICATION-TYPE

hwAdslDynamicCollectInfoTrap		1.3.6.1.4.1.2011.6.31.2.1.0.3
XDSL dynamic collect trap. This trap message is generated when xDSL port Dynamic information collect.
Status: current	Access: accessible-for-notify
NOTIFICATION-TYPE

hwAdslDeltOperResultInfoTrap		1.3.6.1.4.1.2011.6.31.2.1.0.4
ADSL delt trap. This trap message is generated when the ADSL port delt test finish.
Status: current	Access: accessible-for-notify
NOTIFICATION-TYPE

hwAdslPortStatusChangeInfoTrap		1.3.6.1.4.1.2011.6.31.2.1.0.5
ADSL port status change trap. This trap message is generated when the ADSL port status changed.
Status: current	Access: accessible-for-notify
NOTIFICATION-TYPE

hwAdslSeltStartResultTrap		1.3.6.1.4.1.2011.6.31.2.1.0.6
ADSL selt test start trap. This trap message is generated when the ADSL port selt test finish.
Status: current	Access: accessible-for-notify
NOTIFICATION-TYPE

hwADSLLineProfChangeTrap		1.3.6.1.4.1.2011.6.31.2.1.0.7
ADSL line profile change trap. This trap message is generated when the ADSL line profile changed.
Status: current	Access: accessible-for-notify
NOTIFICATION-TYPE

hwADSLAlarmProfChangeTrap		1.3.6.1.4.1.2011.6.31.2.1.0.8
ADSL alarm profile change trap. This trap message is generated when the ADSL alarm profile changed.
Status: current	Access: accessible-for-notify
NOTIFICATION-TYPE

hwAdslAlarmTraps		1.3.6.1.4.1.2011.6.31.2.2
OBJECT IDENTIFIER

hwAdslAlarmTrapsPrefix		1.3.6.1.4.1.2011.6.31.2.2.0
OBJECT IDENTIFIER

hwAdslPortActRateFailThresholdAlarmTrap		1.3.6.1.4.1.2011.6.31.2.2.0.1
This trap message is generated when the ADSL port activation rate fails to reach the rate threshold.
Status: current	Access: accessible-for-notify
NOTIFICATION-TYPE

hwAdslPortActRateReachThresholdAlarmTrap		1.3.6.1.4.1.2011.6.31.2.2.0.2
This trap message is generated when the ADSL port activation rate succeeds in reaching the rate threshold.
Status: current	Access: accessible-for-notify
NOTIFICATION-TYPE

hwAdslPortAutoDeactiveAlarmTrap		1.3.6.1.4.1.2011.6.31.2.2.0.3
This trap message is generated when the ADSL port is automatically deactivated due to the line fault.
Status: current	Access: accessible-for-notify
NOTIFICATION-TYPE

hwAdslPortReactiveAlarmTrap		1.3.6.1.4.1.2011.6.31.2.2.0.4
This trap message is generated when the ADSL port is re-activated after the ADSL line recovers.
Status: current	Access: accessible-for-notify
NOTIFICATION-TYPE

hwAdslPortStatReachThresholdAlarmTrap		1.3.6.1.4.1.2011.6.31.2.2.0.5
This trap message is generated when the performance statistics of the ADSL port reach the threshold.
Status: current	Access: accessible-for-notify
NOTIFICATION-TYPE

hwAdslPortATURPowerOffAlarmTrap		1.3.6.1.4.1.2011.6.31.2.2.0.6
This trap message is generated when the ATU-R is powered off.
Status: current	Access: accessible-for-notify
NOTIFICATION-TYPE

hwAdslPortActRateLowerThresholdAlarmTrap		1.3.6.1.4.1.2011.6.31.2.2.0.7
This trap message is generated when the activation rate of the xDSL line is lower than the threshold.
Status: current	Access: accessible-for-notify
NOTIFICATION-TYPE

hwAdslChipsetNotAvailableAlarmTrap		1.3.6.1.4.1.2011.6.31.2.2.0.8
This trap message is generated when the ADSL chipset is not available.
Status: current	Access: accessible-for-notify
NOTIFICATION-TYPE

hwAdslChipsetRecoverAlarmTrap		1.3.6.1.4.1.2011.6.31.2.2.0.9
This trap message is generated when the ADSL chipset recovers.
Status: current	Access: accessible-for-notify
NOTIFICATION-TYPE

hwAdslPortDeactiveAlarmTrap		1.3.6.1.4.1.2011.6.31.2.2.0.10
Some xDSL ports or all the xDSL ports are automatically deactivated due to lack of licenses. This trap message is generated when the xDSL ports are automatically deactivated.
Status: current	Access: accessible-for-notify
NOTIFICATION-TYPE