SNMPv2-MIB

File: SNMPv2-MIB.mib (32810 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC SNMPv2-CONF

Imported symbols

MODULE-IDENTITY OBJECT-TYPE NOTIFICATION-TYPE
TimeTicks Counter32 snmpModules
mib-2 DisplayString TestAndIncr
TimeStamp MODULE-COMPLIANCE OBJECT-GROUP
NOTIFICATION-GROUP

Defined Types

SysOREntry  
SEQUENCE    
  sysORIndex INTEGER
  sysORID OBJECT IDENTIFIER
  sysORDescr DisplayString
  sysORUpTime TimeStamp

Defined Values

snmpMIB 1.3.6.1.6.3.1
The MIB module for SNMP entities. Copyright (C) The Internet Society (2002). This version of this MIB module is part of RFC 3418; see the RFC itself for full legal notices.
MODULE-IDENTITY    

snmpMIBObjects 1.3.6.1.6.3.1.1
OBJECT IDENTIFIER    

system 1.3.6.1.2.1.1
OBJECT IDENTIFIER    

sysDescr 1.3.6.1.2.1.1.1
A textual description of the entity. This value should include the full name and version identification of the system's hardware type, software operating-system, and networking software.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..255)  

sysObjectID 1.3.6.1.2.1.1.2
The vendor's authoritative identification of the network management subsystem contained in the entity. This value is allocated within the SMI enterprises subtree (1.3.6.1.4.1) and provides an easy and unambiguous means for determining `what kind of box' is being managed. For example, if vendor `Flintstones, Inc.' was assigned the subtree 1.3.6.1.4.1.424242, it could assign the identifier 1.3.6.1.4.1.424242.1.1 to its `Fred Router'.
Status: current Access: read-only
OBJECT-TYPE    
  OBJECT IDENTIFIER  

sysUpTime 1.3.6.1.2.1.1.3
The time (in hundredths of a second) since the network management portion of the system was last re-initialized.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

sysContact 1.3.6.1.2.1.1.4
The textual identification of the contact person for this managed node, together with information on how to contact this person. If no contact information is known, the value is the zero-length string.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..255)  

sysName 1.3.6.1.2.1.1.5
An administratively-assigned name for this managed node. By convention, this is the node's fully-qualified domain name. If the name is unknown, the value is the zero-length string.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..255)  

sysLocation 1.3.6.1.2.1.1.6
The physical location of this node (e.g., 'telephone closet, 3rd floor'). If the location is unknown, the value is the zero-length string.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..255)  

sysServices 1.3.6.1.2.1.1.7
A value which indicates the set of services that this entity may potentially offer. The value is a sum. This sum initially takes the value zero. Then, for each layer, L, in the range 1 through 7, that this node performs transactions for, 2 raised to (L - 1) is added to the sum. For example, a node which performs only routing functions would have a value of 4 (2^(3-1)). In contrast, a node which is a host offering application services would have a value of 72 (2^(4-1) + 2^(7-1)). Note that in the context of the Internet suite of protocols, values should be calculated accordingly: layer functionality 1 physical (e.g., repeaters) 2 datalink/subnetwork (e.g., bridges) 3 internet (e.g., supports the IP) 4 end-to-end (e.g., supports the TCP) 7 applications (e.g., supports the SMTP) For systems including OSI protocols, layers 5 and 6 may also be counted.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..127  

sysORLastChange 1.3.6.1.2.1.1.8
The value of sysUpTime at the time of the most recent change in state or value of any instance of sysORID.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

sysORTable 1.3.6.1.2.1.1.9
The (conceptual) table listing the capabilities of the local SNMP application acting as a command responder with respect to various MIB modules. SNMP entities having dynamically-configurable support of MIB modules will have a dynamically-varying number of conceptual rows.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SysOREntry

sysOREntry 1.3.6.1.2.1.1.9.1
An entry (conceptual row) in the sysORTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  SysOREntry  

sysORIndex 1.3.6.1.2.1.1.9.1.1
The auxiliary variable used for identifying instances of the columnar objects in the sysORTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER 1..2147483647  

sysORID 1.3.6.1.2.1.1.9.1.2
An authoritative identification of a capabilities statement with respect to various MIB modules supported by the local SNMP application acting as a command responder.
Status: current Access: read-only
OBJECT-TYPE    
  OBJECT IDENTIFIER  

sysORDescr 1.3.6.1.2.1.1.9.1.3
A textual description of the capabilities identified by the corresponding instance of sysORID.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

sysORUpTime 1.3.6.1.2.1.1.9.1.4
The value of sysUpTime at the time this conceptual row was last instantiated.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

snmp 1.3.6.1.2.1.11
OBJECT IDENTIFIER    

snmpInPkts 1.3.6.1.2.1.11.1
The total number of messages delivered to the SNMP entity from the transport service.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

snmpInBadVersions 1.3.6.1.2.1.11.3
The total number of SNMP messages which were delivered to the SNMP entity and were for an unsupported SNMP version.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

snmpInBadCommunityNames 1.3.6.1.2.1.11.4
The total number of community-based SNMP messages (for example, SNMPv1) delivered to the SNMP entity which used an SNMP community name not known to said entity. Also, implementations which authenticate community-based SNMP messages using check(s) in addition to matching the community name (for example, by also checking whether the message originated from a transport address allowed to use a specified community name) MAY include in this value the number of messages which failed the additional check(s). It is strongly RECOMMENDED that the documentation for any security model which is used to authenticate community-based SNMP messages specify the precise conditions that contribute to this value.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

snmpInBadCommunityUses 1.3.6.1.2.1.11.5
The total number of community-based SNMP messages (for example, SNMPv1) delivered to the SNMP entity which represented an SNMP operation that was not allowed for the SNMP community named in the message. The precise conditions under which this counter is incremented (if at all) depend on how the SNMP entity implements its access control mechanism and how its applications interact with that access control mechanism. It is strongly RECOMMENDED that the documentation for any access control mechanism which is used to control access to and visibility of MIB instrumentation specify the precise conditions that contribute to this value.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

snmpInASNParseErrs 1.3.6.1.2.1.11.6
The total number of ASN.1 or BER errors encountered by the SNMP entity when decoding received SNMP messages.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

snmpEnableAuthenTraps 1.3.6.1.2.1.11.30
Indicates whether the SNMP entity is permitted to generate authenticationFailure traps. The value of this object overrides any configuration information; as such, it provides a means whereby all authenticationFailure traps may be disabled. Note that it is strongly recommended that this object be stored in non-volatile memory so that it remains constant across re-initializations of the network management system.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

snmpSilentDrops 1.3.6.1.2.1.11.31
The total number of Confirmed Class PDUs (such as GetRequest-PDUs, GetNextRequest-PDUs, GetBulkRequest-PDUs, SetRequest-PDUs, and InformRequest-PDUs) delivered to the SNMP entity which were silently dropped because the size of a reply containing an alternate Response Class PDU (such as a Response-PDU) with an empty variable-bindings field was greater than either a local constraint or the maximum message size associated with the originator of the request.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

snmpProxyDrops 1.3.6.1.2.1.11.32
The total number of Confirmed Class PDUs (such as GetRequest-PDUs, GetNextRequest-PDUs, GetBulkRequest-PDUs, SetRequest-PDUs, and InformRequest-PDUs) delivered to the SNMP entity which were silently dropped because the transmission of the (possibly translated) message to a proxy target failed in a manner (other than a time-out) such that no Response Class PDU (such as a Response-PDU) could be returned.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

snmpTrap 1.3.6.1.6.3.1.1.4
OBJECT IDENTIFIER    

snmpTrapOID 1.3.6.1.6.3.1.1.4.1
The authoritative identification of the notification currently being sent. This variable occurs as the second varbind in every SNMPv2-Trap-PDU and InformRequest-PDU.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  OBJECT IDENTIFIER  

snmpTrapEnterprise 1.3.6.1.6.3.1.1.4.3
The authoritative identification of the enterprise associated with the trap currently being sent. When an SNMP proxy agent is mapping an RFC1157 Trap-PDU into a SNMPv2-Trap-PDU, this variable occurs as the last varbind.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  OBJECT IDENTIFIER  

snmpTraps 1.3.6.1.6.3.1.1.5
OBJECT IDENTIFIER    

coldStart 1.3.6.1.6.3.1.1.5.1
A coldStart trap signifies that the SNMP entity, supporting a notification originator application, is reinitializing itself and that its configuration may have been altered.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

warmStart 1.3.6.1.6.3.1.1.5.2
A warmStart trap signifies that the SNMP entity, supporting a notification originator application, is reinitializing itself such that its configuration is unaltered.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

authenticationFailure 1.3.6.1.6.3.1.1.5.5
An authenticationFailure trap signifies that the SNMP entity has received a protocol message that is not properly authenticated. While all implementations of SNMP entities MAY be capable of generating this trap, the snmpEnableAuthenTraps object indicates whether this trap will be generated.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

snmpSet 1.3.6.1.6.3.1.1.6
OBJECT IDENTIFIER    

snmpSetSerialNo 1.3.6.1.6.3.1.1.6.1
An advisory lock used to allow several cooperating command generator applications to coordinate their use of the SNMP set operation. This object is used for coarse-grain coordination. To achieve fine-grain coordination, one or more similar objects might be defined within each MIB group, as appropriate.
Status: current Access: read-write
OBJECT-TYPE    
  TestAndIncr  

snmpMIBConformance 1.3.6.1.6.3.1.2
OBJECT IDENTIFIER    

snmpMIBCompliances 1.3.6.1.6.3.1.2.1
OBJECT IDENTIFIER    

snmpMIBGroups 1.3.6.1.6.3.1.2.2
OBJECT IDENTIFIER    

snmpBasicCompliance 1.3.6.1.6.3.1.2.1.2
The compliance statement for SNMPv2 entities which implement the SNMPv2 MIB. This compliance statement is replaced by snmpBasicComplianceRev2.
Status: deprecated Access: read-write
MODULE-COMPLIANCE    

snmpBasicComplianceRev2 1.3.6.1.6.3.1.2.1.3
The compliance statement for SNMP entities which implement this MIB module.
Status: current Access: read-write
MODULE-COMPLIANCE    

snmpGroup 1.3.6.1.6.3.1.2.2.8
A collection of objects providing basic instrumentation and control of an SNMP entity.
Status: current Access: read-write
OBJECT-GROUP    

snmpCommunityGroup1 1.3.6.1.6.3.1.2.2.9
A collection of objects providing basic instrumentation of a SNMP entity which supports community-based authentication.
Status: current Access: read-write
OBJECT-GROUP    

snmpSetGroup 1.3.6.1.6.3.1.2.2.5
A collection of objects which allow several cooperating command generator applications to coordinate their use of the set operation.
Status: current Access: read-write
OBJECT-GROUP    

systemGroup 1.3.6.1.6.3.1.2.2.6
The system group defines objects which are common to all managed systems.
Status: current Access: read-write
OBJECT-GROUP    

snmpBasicNotificationsGroup 1.3.6.1.6.3.1.2.2.7
The basic notifications implemented by an SNMP entity supporting command responder applications.
Status: current Access: read-write
NOTIFICATION-GROUP    

snmpWarmStartNotificationGroup 1.3.6.1.6.3.1.2.2.11
An additional notification for an SNMP entity supporting command responder applications, if it is able to reinitialize itself such that its configuration is unaltered.
Status: current Access: read-write
NOTIFICATION-GROUP    

snmpNotificationGroup 1.3.6.1.6.3.1.2.2.12
These objects are required for entities which support notification originator applications.
Status: current Access: read-write
OBJECT-GROUP    

snmpOutPkts 1.3.6.1.2.1.11.2
The total number of SNMP Messages which were passed from the SNMP protocol entity to the transport service.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter32  

snmpInTooBigs 1.3.6.1.2.1.11.8
The total number of SNMP PDUs which were delivered to the SNMP protocol entity and for which the value of the error-status field was `tooBig'.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter32  

snmpInNoSuchNames 1.3.6.1.2.1.11.9
The total number of SNMP PDUs which were delivered to the SNMP protocol entity and for which the value of the error-status field was `noSuchName'.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter32  

snmpInBadValues 1.3.6.1.2.1.11.10
The total number of SNMP PDUs which were delivered to the SNMP protocol entity and for which the value of the error-status field was `badValue'.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter32  

snmpInReadOnlys 1.3.6.1.2.1.11.11
The total number valid SNMP PDUs which were delivered to the SNMP protocol entity and for which the value of the error-status field was `readOnly'. It should be noted that it is a protocol error to generate an SNMP PDU which contains the value `readOnly' in the error-status field, as such this object is provided as a means of detecting incorrect implementations of the SNMP.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter32  

snmpInGenErrs 1.3.6.1.2.1.11.12
The total number of SNMP PDUs which were delivered to the SNMP protocol entity and for which the value of the error-status field was `genErr'.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter32  

snmpInTotalReqVars 1.3.6.1.2.1.11.13
The total number of MIB objects which have been retrieved successfully by the SNMP protocol entity as the result of receiving valid SNMP Get-Request and Get-Next PDUs.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter32  

snmpInTotalSetVars 1.3.6.1.2.1.11.14
The total number of MIB objects which have been altered successfully by the SNMP protocol entity as the result of receiving valid SNMP Set-Request PDUs.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter32  

snmpInGetRequests 1.3.6.1.2.1.11.15
The total number of SNMP Get-Request PDUs which have been accepted and processed by the SNMP protocol entity.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter32  

snmpInGetNexts 1.3.6.1.2.1.11.16
The total number of SNMP Get-Next PDUs which have been accepted and processed by the SNMP protocol entity.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter32  

snmpInSetRequests 1.3.6.1.2.1.11.17
The total number of SNMP Set-Request PDUs which have been accepted and processed by the SNMP protocol entity.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter32  

snmpInGetResponses 1.3.6.1.2.1.11.18
The total number of SNMP Get-Response PDUs which have been accepted and processed by the SNMP protocol entity.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter32  

snmpInTraps 1.3.6.1.2.1.11.19
The total number of SNMP Trap PDUs which have been accepted and processed by the SNMP protocol entity.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter32  

snmpOutTooBigs 1.3.6.1.2.1.11.20
The total number of SNMP PDUs which were generated by the SNMP protocol entity and for which the value of the error-status field was `tooBig.'
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter32  

snmpOutNoSuchNames 1.3.6.1.2.1.11.21
The total number of SNMP PDUs which were generated by the SNMP protocol entity and for which the value of the error-status was `noSuchName'.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter32  

snmpOutBadValues 1.3.6.1.2.1.11.22
The total number of SNMP PDUs which were generated by the SNMP protocol entity and for which the value of the error-status field was `badValue'.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter32  

snmpOutGenErrs 1.3.6.1.2.1.11.24
The total number of SNMP PDUs which were generated by the SNMP protocol entity and for which the value of the error-status field was `genErr'.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter32  

snmpOutGetRequests 1.3.6.1.2.1.11.25
The total number of SNMP Get-Request PDUs which have been generated by the SNMP protocol entity.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter32  

snmpOutGetNexts 1.3.6.1.2.1.11.26
The total number of SNMP Get-Next PDUs which have been generated by the SNMP protocol entity.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter32  

snmpOutSetRequests 1.3.6.1.2.1.11.27
The total number of SNMP Set-Request PDUs which have been generated by the SNMP protocol entity.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter32  

snmpOutGetResponses 1.3.6.1.2.1.11.28
The total number of SNMP Get-Response PDUs which have been generated by the SNMP protocol entity.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter32  

snmpOutTraps 1.3.6.1.2.1.11.29
The total number of SNMP Trap PDUs which have been generated by the SNMP protocol entity.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter32  

snmpObsoleteGroup 1.3.6.1.6.3.1.2.2.10
A collection of objects from RFC 1213 made obsolete by this MIB module.
Status: obsolete Access: read-only
OBJECT-GROUP