TRIPPLITE-12X
File:
TRIPPLITE-12X.mib (84415 bytes)
Imported modules
Imported symbols
Defined Types
TlUpsOutputCircuitEntry |
|
SEQUENCE |
|
|
|
|
tlUpsOutputCircuitIndex |
PositiveInteger |
|
|
tlUpsOutputCircuitStatus |
INTEGER |
|
|
tlUpsOutputCircuitLoadCurrent |
NonNegativeInteger |
|
|
tlUpsOutputCircuitVoltage |
NonNegativeInteger |
|
|
tlUpsOutputCircuitPower |
NonNegativeInteger |
|
|
tlUpsOutputCircuitPowerFactor |
NonNegativeInteger |
|
TlUpsAlarmEntry |
|
SEQUENCE |
|
|
|
|
tlUpsAlarmId |
PositiveInteger |
|
|
tlUpsAlarmDescr |
AutonomousType |
|
|
tlUpsAlarmTime |
TimeStamp |
|
|
tlUpsAlarmDetail |
DisplayString |
|
|
tlUpsAlarmDeviceId |
PositiveInteger |
|
|
tlUpsAlarmDeviceName |
DisplayString |
|
|
tlUpsAlarmLocation |
DisplayString |
|
|
tlUpsAlarmGroup |
INTEGER |
|
|
tlUpsAlarmIp |
IpAddress |
|
|
tlUpsAlarmMac |
DisplayString |
|
TlUpsOutletEntry |
|
SEQUENCE |
|
|
|
|
tlUpsOutletIndex |
PositiveInteger |
|
|
tlUpsOutletState |
INTEGER |
|
|
tlUpsOutletType |
Integer32 |
|
|
tlUpsOutletControl |
INTEGER |
|
|
tlUpsOutletName |
DisplayString |
|
|
tlUpsOutletRampAction |
INTEGER |
|
|
tlUpsOutletRampDataType |
INTEGER |
|
|
tlUpsOutletRampData |
Integer32 |
|
|
tlUpsOutletShedAction |
INTEGER |
|
|
tlUpsOutletShedDataType |
INTEGER |
|
|
tlUpsOutletShedData |
Integer32 |
|
|
tlUpsOutletGroupNdx |
Integer32 |
|
|
tlUpsOutletCurrent |
PositiveInteger |
|
|
tlUpsOutletPower |
PositiveInteger |
|
TlUpsOutletGroupEntry |
|
SEQUENCE |
|
|
|
|
tlUpsOutletGroupIndex |
PositiveInteger |
|
|
tlUpsOutletGroupRowStatus |
RowStatus |
|
|
tlUpsOutletGroupName |
DisplayString |
|
|
tlUpsOutletGroupDesc |
DisplayString |
|
|
tlUpsOutletGroupState |
INTEGER |
|
|
tlUpsOutletGroupControl |
INTEGER |
|
Defined Values
tlPowerAlert |
1.3.6.1.4.1.850.90 |
This MIB module defines MIB objects which provide mechanisms for
remote management capabilities of Tripplite PowerAlert and related
software. |
MODULE-IDENTITY |
|
|
|
hpux9 |
1.3.6.1.4.1.850.2.1.1 |
OBJECT IDENTIFIER |
|
|
|
sunos4 |
1.3.6.1.4.1.850.2.1.2 |
OBJECT IDENTIFIER |
|
|
|
solaris |
1.3.6.1.4.1.850.2.1.3 |
OBJECT IDENTIFIER |
|
|
|
osf |
1.3.6.1.4.1.850.2.1.4 |
OBJECT IDENTIFIER |
|
|
|
ultrix |
1.3.6.1.4.1.850.2.1.5 |
OBJECT IDENTIFIER |
|
|
|
hpux10 |
1.3.6.1.4.1.850.2.1.6 |
OBJECT IDENTIFIER |
|
|
|
netbsd1 |
1.3.6.1.4.1.850.2.1.7 |
OBJECT IDENTIFIER |
|
|
|
freebsd |
1.3.6.1.4.1.850.2.1.8 |
OBJECT IDENTIFIER |
|
|
|
irix |
1.3.6.1.4.1.850.2.1.9 |
OBJECT IDENTIFIER |
|
|
|
linux |
1.3.6.1.4.1.850.2.1.10 |
OBJECT IDENTIFIER |
|
|
|
bsdi |
1.3.6.1.4.1.850.2.1.11 |
OBJECT IDENTIFIER |
|
|
|
openbsd |
1.3.6.1.4.1.850.2.1.12 |
OBJECT IDENTIFIER |
|
|
|
win32 |
1.3.6.1.4.1.850.2.1.13 |
OBJECT IDENTIFIER |
|
|
|
hpux11 |
1.3.6.1.4.1.850.2.1.14 |
OBJECT IDENTIFIER |
|
|
|
win9x |
1.3.6.1.4.1.850.2.1.50 |
OBJECT IDENTIFIER |
|
|
|
winnt |
1.3.6.1.4.1.850.2.1.51 |
OBJECT IDENTIFIER |
|
|
|
solspark |
1.3.6.1.4.1.850.2.1.52 |
OBJECT IDENTIFIER |
|
|
|
solintel |
1.3.6.1.4.1.850.2.1.53 |
OBJECT IDENTIFIER |
|
|
|
aix |
1.3.6.1.4.1.850.2.1.54 |
OBJECT IDENTIFIER |
|
|
|
sco |
1.3.6.1.4.1.850.2.1.55 |
OBJECT IDENTIFIER |
|
|
|
osx |
1.3.6.1.4.1.850.2.1.56 |
OBJECT IDENTIFIER |
|
|
|
unknown |
1.3.6.1.4.1.850.2.1.255 |
OBJECT IDENTIFIER |
|
|
|
tlUPS |
1.3.6.1.4.1.850.100 |
OBJECT IDENTIFIER |
|
|
|
tlUpsIdent |
1.3.6.1.4.1.850.100.1.1 |
OBJECT IDENTIFIER |
|
|
|
tlUpsIdentID |
1.3.6.1.4.1.850.100.1.1.3 |
A user-supplied ID for the UPS. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..65535 |
|
tlUpsSelectedDeviceID |
1.3.6.1.4.1.850.100.1.1.5 |
The device ID selected to be used for retrieving data for this mib.
As the snmp web card has only one device, this is read only for it |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..65535 |
|
tlUpsBatteryAge |
1.3.6.1.4.1.850.100.1.2.1 |
The age of the battery in years. This is equal to
the current date minus tlConfigBattReplDate. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
tlUpsTemperatureF |
1.3.6.1.4.1.850.100.1.2.2 |
The temperature of the battery, in Farenheight degrees. This is
calculated from upsBatteryTemperature, which is in Celsius degrees. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
tlUpsExternalBatteryAge |
1.3.6.1.4.1.850.100.1.2.3 |
The age of external battery in years. This is equal to
the current date minus tlConfigExternalBattReplDate. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
tlUpsPhaseImbalance |
1.3.6.1.4.1.850.100.1.3.4 |
Percentage of imbalance of the 3 phases. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
tlUpsOutputCircuits |
1.3.6.1.4.1.850.100.1.4.6 |
The number of output circuits. This variable
indicates the number of rows in the output circuit table. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
NonNegativeInteger |
|
|
tlUpsOutputCircuitTable |
1.3.6.1.4.1.850.100.1.4.7 |
A list of output currents table entries. The number of entries
is given by the value of tlUpsOutputNumCircuits. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
TlUpsOutputCircuitEntry |
|
tlUpsOutputCircuitEntry |
1.3.6.1.4.1.850.100.1.4.7.1 |
An entry containing information applicable to a
particular output circuit. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
TlUpsOutputCircuitEntry |
|
|
tlUpsOutputCircuitStatus |
1.3.6.1.4.1.850.100.1.4.7.1.2 |
Whether the breaker is open or closed. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
open(0), closed(1) |
|
tlUpsAlarm |
1.3.6.1.4.1.850.100.1.6 |
OBJECT IDENTIFIER |
|
|
|
tlUpsAlarmsPresent |
1.3.6.1.4.1.850.100.1.6.1 |
The present number of active alarm conditions. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Gauge32 |
|
|
tlUpsAlarmTable |
1.3.6.1.4.1.850.100.1.6.2 |
A list of alarm table entries. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
TlUpsAlarmEntry |
|
tlUpsAlarmEntry |
1.3.6.1.4.1.850.100.1.6.2.1 |
An entry containing information applicable to a particular alarm. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
TlUpsAlarmEntry |
|
|
tlUpsAlarmId |
1.3.6.1.4.1.850.100.1.6.2.1.1 |
A unique identifier for an alarm condition. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
PositiveInteger |
|
|
tlUpsAlarmTime |
1.3.6.1.4.1.850.100.1.6.2.1.3 |
The value of sysUpTime when the alarm condition was detected. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
TimeStamp |
|
|
tlUpsAlarmDetail |
1.3.6.1.4.1.850.100.1.6.2.1.4 |
A textual description of the alarm condition. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
tlUpsAlarmDeviceId |
1.3.6.1.4.1.850.100.1.6.2.1.5 |
A numeric identifier for the device on which the alarm is active. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
PositiveInteger |
|
|
tlUpsAlarmDeviceName |
1.3.6.1.4.1.850.100.1.6.2.1.6 |
A string identifier for the device on which the alarm is active. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
tlUpsAlarmLocation |
1.3.6.1.4.1.850.100.1.6.2.1.7 |
The location of the device on which the alarm is active. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
tlUpsAlarmGroup |
1.3.6.1.4.1.850.100.1.6.2.1.8 |
The category/group of this alarm. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
critical(1), warning(2), info(3), status(4), offline(5), custom(6) |
|
tlUpsAlarmIp |
1.3.6.1.4.1.850.100.1.6.2.1.9 |
The originating IP address associated with this alarm. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
tlUpsAlarmMac |
1.3.6.1.4.1.850.100.1.6.2.1.10 |
The originating mac address associated with this alarm. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
tlUpsAlarmPrimaryPowerOutage |
1.3.6.1.4.1.850.100.1.6.3.1 |
The primary power source is not present. |
Status: current |
Access: read-only |
OBJECT-IDENTITY |
|
|
|
tlUpsAlarmSecondaryPowerOutage |
1.3.6.1.4.1.850.100.1.6.3.2 |
The secondary power source is not present. |
Status: current |
Access: read-only |
OBJECT-IDENTITY |
|
|
|
tlUpsAlarmOutputCurrentChanged |
1.3.6.1.4.1.850.100.1.6.3.4 |
The output current changed from its last known value. |
Status: current |
Access: read-only |
OBJECT-IDENTITY |
|
|
|
tlUpsAlarmBatteryAgeAboveThreshold |
1.3.6.1.4.1.850.100.1.6.3.5 |
One or more batteries have been determined to require
replacement. |
Status: current |
Access: read-only |
OBJECT-IDENTITY |
|
|
|
tlUpsAlarmLoadOff |
1.3.6.1.4.1.850.100.1.6.3.6 |
The load is off. |
Status: current |
Access: read-only |
OBJECT-IDENTITY |
|
|
|
tlUpsAlarmUserDefined |
1.3.6.1.4.1.850.100.1.6.3.7 |
A user-defined event is in alarm. |
Status: current |
Access: read-only |
OBJECT-IDENTITY |
|
|
|
tlUpsAlarmBatteryBad |
1.3.6.1.4.1.850.100.1.6.3.8 |
One or more batteries have been determined to require
replacement. |
Status: current |
Access: read-only |
OBJECT-IDENTITY |
|
|
|
tlUpsAlarmOnBattery |
1.3.6.1.4.1.850.100.1.6.3.9 |
The UPS is drawing power from the batteries. |
Status: current |
Access: read-only |
OBJECT-IDENTITY |
|
|
|
tlUpsAlarmLowBattery |
1.3.6.1.4.1.850.100.1.6.3.10 |
The remaining battery run-time is less than or equal
to upsConfigLowBattTime. |
Status: current |
Access: read-only |
OBJECT-IDENTITY |
|
|
|
tlUpsAlarmDepletedBattery |
1.3.6.1.4.1.850.100.1.6.3.11 |
The UPS will be unable to sustain the present load
when and if the utility power is lost. |
Status: current |
Access: read-only |
OBJECT-IDENTITY |
|
|
|
tlUpsAlarmTempBad |
1.3.6.1.4.1.850.100.1.6.3.12 |
A temperature is out of tolerance. |
Status: current |
Access: read-only |
OBJECT-IDENTITY |
|
|
|
tlUpsAlarmOutputBad |
1.3.6.1.4.1.850.100.1.6.3.14 |
An output condition (other than OutputOverload) is
out of tolerance. |
Status: current |
Access: read-only |
OBJECT-IDENTITY |
|
|
|
tlUpsAlarmOutputOverload |
1.3.6.1.4.1.850.100.1.6.3.15 |
The output load exceeds the UPS output capacity. |
Status: current |
Access: read-only |
OBJECT-IDENTITY |
|
|
|
tlUpsAlarmOnBypass |
1.3.6.1.4.1.850.100.1.6.3.16 |
The Bypass is presently engaged on the UPS. |
Status: current |
Access: read-only |
OBJECT-IDENTITY |
|
|
|
tlUpsAlarmBypassBad |
1.3.6.1.4.1.850.100.1.6.3.17 |
The Bypass is out of tolerance. |
Status: current |
Access: read-only |
OBJECT-IDENTITY |
|
|
|
tlUpsAlarmOutputOffAsRequested |
1.3.6.1.4.1.850.100.1.6.3.18 |
The UPS has shutdown as requested, i.e., the output
is off. |
Status: current |
Access: read-only |
OBJECT-IDENTITY |
|
|
|
tlUpsAlarmUpsOffAsRequested |
1.3.6.1.4.1.850.100.1.6.3.19 |
The entire UPS has shutdown as commanded. |
Status: current |
Access: read-only |
OBJECT-IDENTITY |
|
|
|
tlUpsAlarmChargerFailed |
1.3.6.1.4.1.850.100.1.6.3.20 |
An uncorrected problem has been detected within the
UPS charger subsystem. |
Status: current |
Access: read-only |
OBJECT-IDENTITY |
|
|
|
tlUpsAlarmUpsOutputOff |
1.3.6.1.4.1.850.100.1.6.3.21 |
The output of the UPS is in the off state. |
Status: current |
Access: read-only |
OBJECT-IDENTITY |
|
|
|
tlUpsAlarmUpsSystemOff |
1.3.6.1.4.1.850.100.1.6.3.22 |
The UPS system is in the off state. |
Status: current |
Access: read-only |
OBJECT-IDENTITY |
|
|
|
tlUpsAlarmFanFailure |
1.3.6.1.4.1.850.100.1.6.3.23 |
The failure of one or more fans in the UPS has been
detected. |
Status: current |
Access: read-only |
OBJECT-IDENTITY |
|
|
|
tlUpsAlarmFuseFailure |
1.3.6.1.4.1.850.100.1.6.3.24 |
The failure of one or more fuses has been detected. |
Status: current |
Access: read-only |
OBJECT-IDENTITY |
|
|
|
tlUpsAlarmGeneralFault |
1.3.6.1.4.1.850.100.1.6.3.25 |
A general fault in the UPS has been detected. |
Status: current |
Access: read-only |
OBJECT-IDENTITY |
|
|
|
tlUpsAlarmDiagnosticTestFailed |
1.3.6.1.4.1.850.100.1.6.3.26 |
The result of the last diagnostic test indicates a
failure. |
Status: current |
Access: read-only |
OBJECT-IDENTITY |
|
|
|
tlUpsAlarmCommunicationsLost |
1.3.6.1.4.1.850.100.1.6.3.27 |
A problem has been encountered in the communications
between the agent and the UPS. |
Status: current |
Access: read-only |
OBJECT-IDENTITY |
|
|
|
tlUpsAlarmAwaitingPower |
1.3.6.1.4.1.850.100.1.6.3.28 |
The UPS output is off and the UPS is awaiting the
return of input power. |
Status: current |
Access: read-only |
OBJECT-IDENTITY |
|
|
|
tlUpsAlarmShutdownPending |
1.3.6.1.4.1.850.100.1.6.3.29 |
A upsShutdownAfterDelay countdown is underway. |
Status: current |
Access: read-only |
OBJECT-IDENTITY |
|
|
|
tlUpsAlarmShutdownImminent |
1.3.6.1.4.1.850.100.1.6.3.30 |
The UPS will turn off power to the load in less than
5 seconds; this may be either a timed shutdown or a
low battery shutdown. |
Status: current |
Access: read-only |
OBJECT-IDENTITY |
|
|
|
tlUpsAlarmTestInProgress |
1.3.6.1.4.1.850.100.1.6.3.31 |
A test is in progress, as initiated and indicated by
the Test Group. Tests initiated via other
implementation-specific mechanisms can indicate the
presence of the testing in the alarm table, if
desired, via a OBJECT-IDENTITY macro in the MIB
document specific to that implementation and are
outside the scope of this OBJECT-IDENTITY. |
Status: current |
Access: read-only |
OBJECT-IDENTITY |
|
|
|
tlUpsAlarmCurrent1AboveThreshold |
1.3.6.1.4.1.850.100.1.6.3.40 |
The output current on line 1 exceeds load limits. |
Status: current |
Access: read-only |
OBJECT-IDENTITY |
|
|
|
tlUpsAlarmCurrent2AboveThreshold |
1.3.6.1.4.1.850.100.1.6.3.41 |
The output current on line 2 exceeds load limits. |
Status: current |
Access: read-only |
OBJECT-IDENTITY |
|
|
|
tlUpsAlarmCurrent3AboveThreshold |
1.3.6.1.4.1.850.100.1.6.3.42 |
The output current on line 3 exceeds load limits. |
Status: current |
Access: read-only |
OBJECT-IDENTITY |
|
|
|
tlUpsAlarmBusStartVoltageLow |
1.3.6.1.4.1.850.100.1.6.3.44 |
The inverter start up bus voltage is too low. |
Status: current |
Access: read-only |
OBJECT-IDENTITY |
|
|
|
tlUpsAlarmBusOverVoltage |
1.3.6.1.4.1.850.100.1.6.3.45 |
The inverter bus voltage is too high. |
Status: current |
Access: read-only |
OBJECT-IDENTITY |
|
|
|
tlUpsAlarmBusUnderVoltage |
1.3.6.1.4.1.850.100.1.6.3.46 |
The inverter bus voltage is too low. |
Status: current |
Access: read-only |
OBJECT-IDENTITY |
|
|
|
tlUpsAlarmBusVoltageUnbalanced |
1.3.6.1.4.1.850.100.1.6.3.47 |
The inverter bus voltage is not balanced. |
Status: current |
Access: read-only |
OBJECT-IDENTITY |
|
|
|
tlUpsAlarmInverterSoftStartBad |
1.3.6.1.4.1.850.100.1.6.3.48 |
The inverter bus voltage cannot reach desired voltage within a
specified duration. |
Status: current |
Access: read-only |
OBJECT-IDENTITY |
|
|
|
tlUpsAlarmBatteryOverVoltage |
1.3.6.1.4.1.850.100.1.6.3.52 |
The battery voltage is too high. |
Status: current |
Access: read-only |
OBJECT-IDENTITY |
|
|
|
tlUpsAlarmSiteWiringFault |
1.3.6.1.4.1.850.100.1.6.3.54 |
The utility input wiring is faulty. |
Status: current |
Access: read-only |
OBJECT-IDENTITY |
|
|
|
tlUpsAlarmOverCharged |
1.3.6.1.4.1.850.100.1.6.3.56 |
The UPS is over charged. |
Status: current |
Access: read-only |
OBJECT-IDENTITY |
|
|
|
tlUpsAlarmEPOActive |
1.3.6.1.4.1.850.100.1.6.3.57 |
The EPO is currently activate. |
Status: current |
Access: read-only |
OBJECT-IDENTITY |
|
|
|
tlUpsAlarmBypassFrequencyBad |
1.3.6.1.4.1.850.100.1.6.3.58 |
The bypass frequency is out of tolerance. |
Status: current |
Access: read-only |
OBJECT-IDENTITY |
|
|
|
tlUpsAlarmSmartBatteryCommLost |
1.3.6.1.4.1.850.100.1.6.3.61 |
Communications with the smart batteries was lost. |
Status: current |
Access: read-only |
OBJECT-IDENTITY |
|
|
|
tlUpsAlarmSourceAOutage |
1.3.6.1.4.1.850.100.1.6.3.62 |
Input power source A is not present. |
Status: current |
Access: read-only |
OBJECT-IDENTITY |
|
|
|
tlUpsAlarmSourceBOutage |
1.3.6.1.4.1.850.100.1.6.3.63 |
Input power source B is not present. |
Status: current |
Access: read-only |
OBJECT-IDENTITY |
|
|
|
tlUpsAlarmWatchdogReset |
1.3.6.1.4.1.850.100.1.6.3.64 |
The internal watchdog triggered a reset of the device. |
Status: current |
Access: read-only |
OBJECT-IDENTITY |
|
|
|
tlUpsAlarmDevName |
1.3.6.1.4.1.850.100.1.6.7 |
The name of the device, tlDevName, corresponding to the device that is
associated with this alarm. |
Status: deprecated |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
tlUpsAlarmDevLocation |
1.3.6.1.4.1.850.100.1.6.8 |
The location of the device, tlDevLocation, corresponding to the device
that is associated with this alarm. |
Status: deprecated |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
tlUpsAlarmCategory |
1.3.6.1.4.1.850.100.1.6.9 |
The category, tlDevEvtCategory, of this alarm. |
Status: deprecated |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
tlUpsTest |
1.3.6.1.4.1.850.100.1.7 |
OBJECT IDENTIFIER |
|
|
|
tlUpsTestDate |
1.3.6.1.4.1.850.100.1.7.1 |
The date of the last self-test run on the ups, in the
format YYYYMMDD. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
tlUpsWatchdogSupported |
1.3.6.1.4.1.850.100.1.8.1 |
Indicates whether or not this UPS supports a watchdog reboot. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
TruthValue |
|
|
tlUpsWatchdogSecsBeforeReboot |
1.3.6.1.4.1.850.100.1.8.2 |
The maximum number of seconds that can expire between polls that
the engine makes to the UPS for data. If this time runs out, then
the UPS will cycle its outputs. Set this to zero to turns disable
this feature. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
NonNegativeInteger |
|
|
tlUpsControlRamp |
1.3.6.1.4.1.850.100.1.8.3.2 |
Set to TRUE to initiate Ramp |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
TruthValue |
|
|
tlUpsControlShed |
1.3.6.1.4.1.850.100.1.8.3.3 |
Set to TRUE to initiate Shed |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
TruthValue |
|
|
tlUpsConfigBattReplDate |
1.3.6.1.4.1.850.100.1.9.1 |
The date on which the battery was last replaced, in the format
YYYYMMDD. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
tlUpsConfigDisplayUnits |
1.3.6.1.4.1.850.100.1.9.4 |
Selects English or Metric display for all readings. This selection may not
be available on all devices. Further, some devices may support this selection,
but not via a software selector. In this latter case, selections must be
performed on the device itself. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
english(0), metric(1) |
|
tlUpsOutletTable |
1.3.6.1.4.1.850.100.1.10.2 |
A list of all device Outlets for all devices. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
TlUpsOutletEntry |
|
tlUpsOutletEntry |
1.3.6.1.4.1.850.100.1.10.2.1 |
An entry containing Outlet information applicable to a particular
device managed by this agent. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
TlUpsOutletEntry |
|
|
tlUpsOutletIndex |
1.3.6.1.4.1.850.100.1.10.2.1.1 |
This is the index number of this Outlet for the device
indicated by tlDeviceIndex. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
PositiveInteger |
|
|
tlUpsOutletState |
1.3.6.1.4.1.850.100.1.10.2.1.2 |
The current state of the Outlet. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
unknown(0), off(1), on(2) |
|
tlUpsOutletType |
1.3.6.1.4.1.850.100.1.10.2.1.3 |
This is a bit field that indicates the type of this Outlet.
When 0, the outlet is not controllable and has none of the
other features indicated in the bit map. When non-zero,
the features present for this outlet can be interpreted with the
definition.
Bit Display
0 Reserved, may be 1 or 0
1 Controllable
2
3
4
5
6
7
8
9
10
11
12
13
14
15
|
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
tlUpsOutletControl |
1.3.6.1.4.1.850.100.1.10.2.1.4 |
Controls the state of the Outlet. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
turnOff(1), turnOn(2), cycle(3) |
|
tlUpsOutletName |
1.3.6.1.4.1.850.100.1.10.2.1.5 |
A string identifying the devices attached to the
output(s) of the device. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
tlUpsOutletRampAction |
1.3.6.1.4.1.850.100.1.10.2.1.6 |
The ramp action to take on the Outlet. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
remainOff(0), turnOnAfterDelay(1) |
|
tlUpsOutletRampDataType |
1.3.6.1.4.1.850.100.1.10.2.1.7 |
The type of data associated with ramp action. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
delayInSeconds(0) |
|
tlUpsOutletRampData |
1.3.6.1.4.1.850.100.1.10.2.1.8 |
The data value associated with type of ramp data. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
tlUpsOutletShedAction |
1.3.6.1.4.1.850.100.1.10.2.1.9 |
The shed action to take on the Outlet. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
remainOn(0), turnOffAfterDelay(1) |
|
tlUpsOutletShedDataType |
1.3.6.1.4.1.850.100.1.10.2.1.10 |
The type of data associated with shed action. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
delayInSeconds(0) |
|
tlUpsOutletShedData |
1.3.6.1.4.1.850.100.1.10.2.1.11 |
The data value associated with type of shed data. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
tlUpsOutletGroupNdx |
1.3.6.1.4.1.850.100.1.10.2.1.12 |
tlUpsOutletGroupIndex of corresponding outlet group, or 0 if ungrouped. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
tlUpsOutletCurrent |
1.3.6.1.4.1.850.100.1.10.2.1.13 |
The value of this outlet's current, represented as 0.1A. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
PositiveInteger |
|
|
tlUpsOutletGroupTable |
1.3.6.1.4.1.850.100.1.11.2 |
A list of device outlet group entries. The number of entries is
given by the value of tlUpsOutletNumOutletGroups. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
TlUpsOutletGroupEntry |
|
tlUpsOutletGroupEntry |
1.3.6.1.4.1.850.100.1.11.2.1 |
An entry containing outlet group information applicable
to a particular device managed by this agent |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
TlUpsOutletGroupEntry |
|
|
tlUpsOutletGroupState |
1.3.6.1.4.1.850.100.1.11.2.1.5 |
The current state of the outlet group. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
unknown(0), off(1), on(2), mixed(3) |
|
tlUpsOutletGroupControl |
1.3.6.1.4.1.850.100.1.11.2.1.6 |
Controls the state of every outlet associated with the group. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
turnOff(1), turnOn(2), cycle(3) |
|
tlUpsMainOutlet |
1.3.6.1.4.1.850.100.1.12 |
OBJECT IDENTIFIER |
|
|
|
tlUpsMainOutletState |
1.3.6.1.4.1.850.100.1.12.1 |
The current state of the main output of the device. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
unknown(0), off(1), on(2), mixed(3) |
|
tlUpsMainOutletControllable |
1.3.6.1.4.1.850.100.1.12.2 |
Indicates if this device has controllable outlets |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
TruthValue |
|
|
tlUpsMainOutletControl |
1.3.6.1.4.1.850.100.1.12.3 |
Controls the state of the main outlet of the device. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
idle(0), turnOff(1), turnOn(2), cycle(3) |
|
tlUpsTemperature |
1.3.6.1.4.1.850.100.1.13.1 |
The ambient temperature. The measurement returned will either be in
units of Celsius (C) or Fahrenheit (F) depending upon whether Metric
or English was selected for the reading by tlUpsConfigDisplayUnits. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
tlUpsTraps |
1.3.6.1.4.1.850.100.2 |
OBJECT IDENTIFIER |
|
|
|
tlUpsTrapAlarmEntryAddedV1 |
3 |
This trap is sent each time an alarm is inserted into
to the alarm table. |
TRAP-TYPE |
|
|
|
tlUpsTrapAlarmEntryAdded |
1.3.6.1.4.1.850.100.2.3 |
This trap is sent each time an alarm is inserted into
to the alarm table. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
tlUpsTrapAlarmEntryRemovedV1 |
4 |
This trap is sent each time an alarm is removed from
the alarm table. |
TRAP-TYPE |
|
|
|
tlUpsTrapAlarmEntryRemoved |
1.3.6.1.4.1.850.100.2.4 |
This trap is sent each time an alarm is removed from
the alarm table. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
tlUpsTrapSystemStartup |
1.3.6.1.4.1.850.100.2.5 |
Used to inform another entity of an engine's startup. The varbinds that follow are:
OBJ1 = tlEngineType
Obj1Value = The type of engine providing this data
OBJ2 = tlEngineSoftwareVersion
Obj2Value = The current version of the engine
OBJ3 = tlEngineMACAddr
Obj3Value = The MAC address of the engine
OBJ4 = tlUpsSnmpCardSerialNum
Obj4Value = The serial number of the SNMPWEBCARD [should be 0 on PC]
--- if this trap is extended, place all static OIDs above this mark. all objects below
--- the number of devices (tlNumDevices) is explicit as per device for enumeration by
--- the target receiver
OBJ5 = tlNumDevices
Obj5Value = The number of devices attached
--- The following objects will be replicated per each device:
OBJ6 = The OID for an entry of tlDevManufacturer, indexed by device
Obj6Value = The device's manufacturer
OBJ7 = The OID for an entry of tlDevModel, indexed by device
Obj7Value = The device's model name
OBJ8 = The OID for an entry of tlDevName, indexed by device
Obj8Value = The device's display name
OBJ9 = The OID for an entry of tlDevLocation, indexed by device
Obj9Value = The device's location
OBJ10 = The OID for an entry of tlDevRegion, indexed by device
Obj10Value= The device's region
OBJ11 = The OID for an entry of tlDevProtocol, indexed by device
Obj11Value= The device's protocol (display string format)
|
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
tlUpsTrapSystemShutdown |
1.3.6.1.4.1.850.100.2.6 |
Used to inform another entity of an engine's startup. The varbinds that follow are:
OBJ1 = tlEngineType
Obj1Value = The type of engine providing this data
OBJ2 = tlEngineSoftwareVersion
Obj2Value = The current version of the engine
OBJ3 = tlEngineMACAddr
Obj3Value = The MAC address of the engine
OBJ4 = tlUpsSnmpCardSerialNum
Obj4Value = The serial number of the SNMPWEBCARD [should be 0 on PC]
--- if this trap is extended, place all static OIDs above this mark. all objects below
--- the number of devices (tlNumDevices) is explicit as per device for enumeration by
--- the target receiver
OBJ5 = tlNumDevices
Obj5Value = The number of devices attached
--- The following objects will be replicated per each device:
OBJ6 = The OID for an entry of tlDevManufacturer, indexed by device
Obj6Value = The device's manufacturer
OBJ7 = The OID for an entry of tlDevModel, indexed by device
Obj7Value = The device's model name
OBJ8 = The OID for an entry of tlDevName, indexed by device
Obj8Value = The device's display name
OBJ9 = The OID for an entry of tlDevLocation, indexed by device
Obj9Value = The device's location
OBJ10 = The OID for an entry of tlDevRegion, indexed by device
Obj10Value= The device's region
OBJ11 = The OID for an entry of tlDevProtocol, indexed by device
Obj11Value= The device's protocol (display string format)
|
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
tlEnvHumidity |
1.3.6.1.4.1.850.101.1.2.1 |
The ambient humidity (%). |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
tlEnvHumidityLowLimit |
1.3.6.1.4.1.850.101.1.2.2 |
The lower alarm limit for ambient humidity (%). |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
tlEnvHumidityInAlarm |
1.3.6.1.4.1.850.101.1.2.4 |
Indicates whether or not humidity is in alarm. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
TruthValue |
|
|
tlEnvContactEntry |
1.3.6.1.4.1.850.101.2.1.1 |
An entry containing information applicable to a particular contact. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
TlEnvContactEntry |
|
|
tlCooling |
1.3.6.1.4.1.850.103 |
OBJECT IDENTIFIER |
|
|
|
tlCoolingName |
1.3.6.1.4.1.850.103.1.1.6 |
The user defined name for the AC Unit. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
tlCoolingCondOutletTemp |
1.3.6.1.4.1.850.103.1.2.1 |
The condenser outlet air stream temperature in tenths of degrees in the units Celcius/Fahrenheit as specified in tlCoolingDisplayUnits. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
tlCoolingCondInletTemp |
1.3.6.1.4.1.850.103.1.2.2 |
The condenser inlet air stream temperature in tenths of degrees in the units Celcius/Fahrenheit as specified in tlCoolingDisplayUnits. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
tlCoolingRefrigerantTemp |
1.3.6.1.4.1.850.103.1.2.3 |
The temperature of the refrigerant in the suction line. This is displayed in tenths of degrees in the units Celcius/Fahrenheit as specified in tlCoolingDisplayUnits. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
tlCoolingEvapSurfaceTemp |
1.3.6.1.4.1.850.103.1.2.4 |
The surface temperature of the evaporator in tenths of degrees in the units Celcius/Fahrenheit as specified in tlCoolingDisplayUnits. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
tlCoolingSuctionPressure |
1.3.6.1.4.1.850.103.1.2.5 |
The pressure of the compressor suction line in tenths of (Mpa/psi) depending on the value of tlCoolingDisplayUnits. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
tlCoolingDischargePressure |
1.3.6.1.4.1.850.103.1.2.6 |
The pressure of the compressor discharge line in tenths of (Mpa/psi) depending on the value of tlCoolingDisplayUnits. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
tlCoolingEvapFanSpeed |
1.3.6.1.4.1.850.103.1.2.7 |
The current speed of the evaporator fan. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
off(0), low(1), medLow(2), med(3), medHi(4), hi(5) |
|
tlCoolingCondFanSpeed |
1.3.6.1.4.1.850.103.1.2.8 |
The current speed of the condenser fan. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
off(0), low(1), hi(2) |
|
tlCoolingCompFrequency |
1.3.6.1.4.1.850.103.1.2.9 |
The operating frequency of the compressor in tenths of Arms. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
tlCoolingEEVPercentage |
1.3.6.1.4.1.850.103.1.2.10 |
The opening percentage of the EEV. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
tlCoolingUnitCurrent |
1.3.6.1.4.1.850.103.1.2.11 |
The the total current draw of the unit in tenths of Arms. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
tlCoolingFanCurrent |
1.3.6.1.4.1.850.103.1.2.12 |
Thethe current draw of the Evaporator and Condenser fans in tents of Arms. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
tlCoolingCompCurrent |
1.3.6.1.4.1.850.103.1.2.13 |
The operating current of the compressor in Arms. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
tlCoolingReturnAirTemp |
1.3.6.1.4.1.850.103.1.2.14 |
The return air temperature in tenths of degrees in the units Celcius/Fahrenheit as specified in tlCoolingDisplayUnits. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
tlCoolingSuctionTemp |
1.3.6.1.4.1.850.103.1.2.15 |
The temperature of the compressor suction line in tenths of degrees in the units Celcius/Fahrenheit as specified in tlCoolingDisplayUnits. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
tlCoolingSupplyAirTemp |
1.3.6.1.4.1.850.103.1.2.16 |
The supply air temperature in tenths of degrees in the units Celcius/Fahrenheit as specified in tlCoolingDisplayUnits. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
tlCoolingEvapFanRunDays |
1.3.6.1.4.1.850.103.1.3.2 |
Total days the evaporator fan has been under operation. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
tlCoolingCondFanRunDays |
1.3.6.1.4.1.850.103.1.3.3 |
Total days the condenser fan has been under operation. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
tlCoolingOnOff |
1.3.6.1.4.1.850.103.1.4.1 |
Turn the unit off or on. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
turnOffUnit(0), turnOnUnit(1) |
|
tlCoolingSetPointTemp |
1.3.6.1.4.1.850.103.1.4.2 |
The set point temperature the unit will control the temperature to in tenths of degrees in Celcius or Fahrenheit based upon tleCoolDisplayUnits. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
tlCoolingAutoStart |
1.3.6.1.4.1.850.103.1.4.3 |
Specified if the unit should start automatically on power up. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
disabled(0), enabled(1) |
|
tlCoolingFanSpeedOverride |
1.3.6.1.4.1.850.103.1.4.4 |
Speed of evaporator fan set by the user. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
autoFanSpeed(0), low(1), medLow(2), med(3), medHi(4), hi(5) |
|
tlCoolingControlType |
1.3.6.1.4.1.850.103.1.4.5 |
Which temperature to be used as a control point. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
returnAirTemp(0), remoteTemperature(1) |
|
tlCoolingCurrentRemoteTemp |
1.3.6.1.4.1.850.103.1.4.6 |
The external remote temperature in tenths of degrees in Celcius or Fahrenheit depending upon value of tlCoolingDisplayUnits |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
tlCoolingDisplayUnits |
1.3.6.1.4.1.850.103.1.4.7 |
Selects English or Metric display for all readings. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
metric(0), english(1) |
|
tlCoolingBeepOnKey |
1.3.6.1.4.1.850.103.1.4.8 |
Indicates if the display sounds a beep when a key is pressed. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
noBeep(0), beepOn(1) |
|
tlCoolingOutputRelaySource |
1.3.6.1.4.1.850.103.1.4.9 |
The alarm level that causes the ouput relay to activate. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
disabled(0), allAlarmsAndWarnings(1), criticalAlarmsOnly(2) |
|
tlCoolingOffOnLeak |
1.3.6.1.4.1.850.103.1.4.10 |
Indicates if the unit should stop cooling when leak input is activated. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
turnOff(0), alarmOnly(1) |
|
tlCoolingOutputRelayDefault |
1.3.6.1.4.1.850.103.1.4.13 |
Type of contact to make when output relay is activated. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
nc(0), no(1) |
|
tlCoolingEnableAirFilterAlarm |
1.3.6.1.4.1.850.103.1.5.2 |
When enabled indicated that an alarm should occur when the maximum number of air filter run hours has been exceeded. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
disabled(0), enabled(1) |
|
tlCoolingMaxSupplyTemp |
1.3.6.1.4.1.850.103.1.5.3 |
Maximum allowed supply air temperature before firing an alarm. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
tlCoolingMinSupplyTemp |
1.3.6.1.4.1.850.103.1.5.4 |
Minimum allowed supply air temperature allowed before firing an alarm. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
tlCoolingTempDiffAlarm |
1.3.6.1.4.1.850.103.1.5.5 |
Maximum allowed air temperature deviation from set allowed before firing an alarm. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
tlCoolingMaxReturnAirTemp |
1.3.6.1.4.1.850.103.1.5.6 |
When enabled indicated that an alarm should occur when the maximum number of air filter run hours has been exceeded. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
tlCoolingAirFilterClogged |
1.3.6.1.4.1.850.103.6.3.7 |
The air filter is clogged. |
Status: current |
Access: read-write |
OBJECT-IDENTITY |
|
|
|
tlCoolingCondenserFanFault |
1.3.6.1.4.1.850.103.6.3.14 |
The condenser fan is in fault. |
Status: current |
Access: read-write |
OBJECT-IDENTITY |
|
|
|
tlCoolingCondenserFailure |
1.3.6.1.4.1.850.103.6.3.15 |
The condenser has failed. |
Status: current |
Access: read-write |
OBJECT-IDENTITY |
|
|
|
tlCoolingReturnAirTempHigh |
1.3.6.1.4.1.850.103.6.3.17 |
The return air temperature is high. |
Status: current |
Access: read-write |
OBJECT-IDENTITY |
|
|
|
tlCoolingSupplyAirTempHigh |
1.3.6.1.4.1.850.103.6.3.18 |
The supply air temperature is high. |
Status: current |
Access: read-write |
OBJECT-IDENTITY |
|
|
|
tlCoolingEvaporatorFailure |
1.3.6.1.4.1.850.103.6.3.19 |
The evaporator has failed. |
Status: current |
Access: read-write |
OBJECT-IDENTITY |
|
|
|
tlCoolingCompressorFailure |
1.3.6.1.4.1.850.103.6.3.28 |
The compressor has failed. |
Status: current |
Access: read-write |
OBJECT-IDENTITY |
|
|
|
tlCoolingCurrentLimit |
1.3.6.1.4.1.850.103.6.3.29 |
The current is out of range. |
Status: current |
Access: read-write |
OBJECT-IDENTITY |
|
|
|
tlCoolingWaterLeak |
1.3.6.1.4.1.850.103.6.3.30 |
Water is leaking. |
Status: current |
Access: read-write |
OBJECT-IDENTITY |
|
|
|
tlCoolingFanUnderCurrent |
1.3.6.1.4.1.850.103.6.3.31 |
The fan is under current. |
Status: current |
Access: read-write |
OBJECT-IDENTITY |
|
|
|
tlCoolingFanOverCurrent |
1.3.6.1.4.1.850.103.6.3.32 |
The fan is over current. |
Status: current |
Access: read-write |
OBJECT-IDENTITY |
|
|
|
tlCoolingWaterFull |
1.3.6.1.4.1.850.103.6.3.34 |
Water is Full. |
Status: current |
Access: read-write |
OBJECT-IDENTITY |
|
|
|
tlCoolingAutoCoolingOn |
1.3.6.1.4.1.850.103.6.3.35 |
Automatic cooling was activated to lower the temperature below the
remote set point. |
Status: current |
Access: read-write |
OBJECT-IDENTITY |
|
|
|
tlSrCoolNetModel |
1.3.6.1.4.1.850.104.1.1.1 |
The model name for the device attached to the SRCOOLNET. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
tlSrCoolNetName |
1.3.6.1.4.1.850.104.1.1.5 |
The user defined name for the AC Unit. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
tlSrCoolNetMode |
1.3.6.1.4.1.850.104.1.2.1 |
The current mode of SRCOOLNET. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
off(0), idle(1), cooling(2), unknown(3), dehumidifying(4), defrost(5), notconnected(6) |
|
tlSrCoolNetFanSpeed |
1.3.6.1.4.1.850.104.1.2.2 |
The current speed of the fan. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
off(0), low(1), med(2), hi(3) |
|
tlSrCoolNetReturnAirTemp |
1.3.6.1.4.1.850.104.1.2.3 |
The return air stream temperature in tenths of degrees in the units Celsius/Fahrenheit as specified in tlSrCoolNetDisplayUnits. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
tlSrCoolNetWaterFull |
1.3.6.1.4.1.850.104.1.2.4 |
Indicates the water reservoir is full or not full. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
waterNotFull(0), waterFull(1) |
|
tlSrCoolNetCurrentRemoteTemp |
1.3.6.1.4.1.850.104.1.2.5 |
The EnviroSense temperature in tenths of degrees in Celsius or Fahrenheit depending upon value of tlSrCoolNetDisplayUnits.
Only available if EnviroSense is connected to SRCOOLNET. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
tlSrCoolNetDisplayUnits |
1.3.6.1.4.1.850.104.1.2.6 |
Selects English or Metric display for all readings. AC unit must be manually configured to match this setting. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
metric(0), english(1) |
|
tlSrCoolNetOnOff |
1.3.6.1.4.1.850.104.1.3.1 |
Turn the unit off or on. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
turnOffUnit(0), turnOnUnit(1) |
|
tlSrCoolSetMode |
1.3.6.1.4.1.850.104.1.3.2 |
Set the operating mode of cooling unit. Unit must be ON to set mode. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
cooling(0), dehumidifying(1) |
|
tlSrCoolNetSetPointTemp |
1.3.6.1.4.1.850.104.1.3.3 |
The local set point temperature in tenths of degrees in Celsius or Fahrenheit based upon tlSrCoolNetDisplayUnits. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
tlSrCoolNetRemoteSetPointTemp |
1.3.6.1.4.1.850.104.1.3.4 |
The remote set point temperature in tenths of degrees in Celsius or Fahrenheit based upon tlSrCoolNetDisplayUnits.
Only available when EnviroSense is connected to SRCOOLNET. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
tlSrCoolNetFanSpeedSetting |
1.3.6.1.4.1.850.104.1.3.5 |
Set the fan speed of the AC unit. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
auto(0), low(1), med(2), high(3) |
|
tlSrCoolNetRemoteSetpointEnable |
1.3.6.1.4.1.850.104.1.3.6 |
Use remote temperature setpoint for control point versus return air temp. Only available when EnviroSense is connected
to SRCOOLNET. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
disable(0), enable(1) |
|
tlSrCoolNetFanAlwaysOn |
1.3.6.1.4.1.850.104.1.3.7 |
Leave fans on when not cooling. Only available when EnviroSense is connected to SRCOOLNET. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
disable(0), enable(1) |
|
tlGroups |
1.3.6.1.4.1.850.20.2 |
OBJECT IDENTIFIER |
|
|
|
tlUpsFullIdentGroup |
1.3.6.1.4.1.850.20.2.3.100.1 |
The tlUpsFullIdentGroup defines objects which are common to the Ident
group of fully compliant Tripplite UPS's |
Status: current |
Access: read-write |
OBJECT-GROUP |
|
|
|
tlUpsFullBatteryGroup |
1.3.6.1.4.1.850.20.2.3.100.2 |
The tlUpsFullBatteryGroup defines objects which are common to the Battery
group of fully compliant Tripplite UPS's |
Status: current |
Access: read-write |
OBJECT-GROUP |
|
|
|
tlUpsFullAlarmObjsGroup |
1.3.6.1.4.1.850.20.2.3.100.6.1 |
The tlUpsFullAlarmObjsGroup defines objects which are common to
the Alarm group of fully compliant Tripplite UPS's |
Status: current |
Access: read-write |
OBJECT-GROUP |
|
|
|
tlUpsFullTestGroup |
1.3.6.1.4.1.850.20.2.3.100.7 |
The tlUpsFullTestGroup defines objects which are common to the Test
group of fully compliant Tripplite UPS's |
Status: current |
Access: read-write |
OBJECT-GROUP |
|
|
|
tlUpsFullControlGroup |
1.3.6.1.4.1.850.20.2.3.100.8 |
The tlUpsFullControlGroup defines objects which are common to the Control
group of fully compliant Tripplite UPS's |
Status: current |
Access: read-write |
OBJECT-GROUP |
|
|
|
tlUpsFullConfigGroup |
1.3.6.1.4.1.850.20.2.3.100.9 |
The tlUpsFullConfigGroup defines objects which are common to the Config
group of fully compliant Tripplite UPS's |
Status: current |
Access: read-write |
OBJECT-GROUP |
|
|
|
tlUpsFullOutletGroup |
1.3.6.1.4.1.850.20.2.3.100.10 |
The tlUpsFullOutletGroup defines objects which are common to the Outlet
group of fully compliant Tripplite UPS's |
Status: current |
Access: read-write |
OBJECT-GROUP |
|
|
|