TRIPPLITE-PRODUCTS

File: TRIPPLITE-PRODUCTS.mib (411738 bytes)

Imported modules

SNMPv2-TC	SNMPv2-MIB	SNMPv2-CONF
SNMPv2-SMI	TRIPPLITE

Imported symbols

DisplayString	TruthValue	TimeStamp
RowStatus	sysUpTime	OBJECT-GROUP
NOTIFICATION-GROUP	MODULE-IDENTITY	OBJECT-IDENTITY
OBJECT-TYPE	NOTIFICATION-TYPE	Gauge32
Integer32	Unsigned32	enterprises
IpAddress	TimeTicks	tripplite

Defined Types

TlpDeviceEntry
SEQUENCE
	tlpDeviceIndex	Unsigned32
	tlpDeviceRowStatus	RowStatus
	tlpDeviceType	OBJECT IDENTIFIER
	tlpDeviceManufacturer	DisplayString
	tlpDeviceModel	DisplayString
	tlpDeviceName	DisplayString
	tlpDeviceID	INTEGER
	tlpDeviceLocation	DisplayString
	tlpDeviceRegion	DisplayString
	tlpDeviceStatus	INTEGER

TlpDeviceIdentEntry
SEQUENCE
	tlpDeviceIdentProtocol	DisplayString
	tlpDeviceIdentCommPortType	INTEGER
	tlpDeviceIdentCommPortName	DisplayString
	tlpDeviceIdentFirmwareVersion	DisplayString
	tlpDeviceIdentSerialNum	DisplayString
	tlpDeviceIdentDateInstalled	DisplayString
	tlpDeviceIdentHardwareVersion	DisplayString
	tlpDeviceIdentCurrentUptime	DisplayString
	tlpDeviceIdentTotalUptime	DisplayString
	tlpDeviceIdentFirmwareVersion2	DisplayString
	tlpDeviceIdentFirmwareVersion3	DisplayString
	tlpDeviceIdentNvrID	DisplayString

TlpUpsIdentEntry
SEQUENCE
	tlpUpsIdentNumInputs	Unsigned32
	tlpUpsIdentNumOutputs	Unsigned32
	tlpUpsIdentNumBypass	Unsigned32
	tlpUpsIdentNumPhases	Unsigned32
	tlpUpsIdentNumOutlets	Unsigned32
	tlpUpsIdentNumOutletGroups	Unsigned32
	tlpUpsIdentNumBatteryPacks	Unsigned32
	tlpUpsIdentNumFans	Unsigned32

TlpUpsSupportsEntry
SEQUENCE
	tlpUpsSupportsEnergywise	TruthValue
	tlpUpsSupportsRampShed	TruthValue
	tlpUpsSupportsOutletGroup	TruthValue
	tlpUpsSupportsOutletCurrentPower	TruthValue
	tlpUpsSupportsOutletVoltage	TruthValue

TlpUpsDeviceEntry
SEQUENCE
	tlpUpsDeviceMainLoadState	INTEGER
	tlpUpsDeviceMainLoadControllable	TruthValue
	tlpUpsDeviceMainLoadCommand	INTEGER
	tlpUpsDevicePowerOnDelay	Integer32
	tlpUpsDeviceTestDate	DisplayString
	tlpUpsDeviceTestResultsStatus	INTEGER
	tlpUpsDeviceTemperatureC	Integer32
	tlpUpsDeviceTemperatureF	Integer32
	tlpUpsDeviceLastACFailureReason	INTEGER
	tlpUpsDeviceLastShutdownReason	INTEGER
	tlpUpsDeviceOutputCurrentPrecision	INTEGER

TlpUpsBatterySummaryEntry
SEQUENCE
	tlpUpsBatteryStatus	INTEGER
	tlpUpsSecondsOnBattery	Unsigned32
	tlpUpsEstimatedMinutesRemaining	Unsigned32
	tlpUpsEstimatedChargeRemaining	INTEGER
	tlpUpsBatteryRunTimeRemaining	TimeTicks

TlpUpsBatteryDetailEntry
SEQUENCE
	tlpUpsBatteryDetailVoltage	Unsigned32
	tlpUpsBatteryDetailCurrent	Integer32
	tlpUpsBatteryDetailCapacity	INTEGER
	tlpUpsBatteryDetailCharge	INTEGER
	tlpUpsBatteryDetailChargerStatus	INTEGER

TlpUpsBatteryIdentEntry
SEQUENCE
	tlpUpsBatteryPackIdentIndex	Unsigned32
	tlpUpsBatteryPackIdentManufacturer	DisplayString
	tlpUpsBatteryPackIdentModel	DisplayString
	tlpUpsBatteryPackIdentSerialNum	DisplayString
	tlpUpsBatteryPackIdentFirmware	DisplayString
	tlpUpsBatteryPackIdentSKU	DisplayString

TlpUpsBatteryConfigEntry
SEQUENCE
	tlpUpsBatteryPackConfigChemistry	INTEGER
	tlpUpsBatteryPackConfigStyle	INTEGER
	tlpUpsBatteryPackConfigLocation	INTEGER
	tlpUpsBatteryPackConfigStrings	Unsigned32
	tlpUpsBatteryPackConfigBatteriesPerString	Unsigned32
	tlpUpsBatteryPackConfigCellsPerBattery	INTEGER
	tlpUpsBatteryPackConfigNumBatteries	Unsigned32
	tlpUpsBatteryPackConfigCapacityUnits	INTEGER
	tlpUpsBatteryPackConfigDesignCapacity	Unsigned32
	tlpUpsBatteryPackConfigCellCapacity	Unsigned32
	tlpUpsBatteryPackConfigMinCellVoltage	Unsigned32
	tlpUpsBatteryPackConfigMaxCellVoltage	Unsigned32

TlpUpsBatteryPackDetailEntry
SEQUENCE
	tlpUpsBatteryPackDetailCondition	INTEGER
	tlpUpsBatteryPackDetailTemperatureC	Unsigned32
	tlpUpsBatteryPackDetailTemperatureF	Unsigned32
	tlpUpsBatteryPackDetailAge	Unsigned32
	tlpUpsBatteryPackDetailLastReplaceDate	DisplayString
	tlpUpsBatteryPackDetailNextReplaceDate	DisplayString
	tlpUpsBatteryPackDetailCycleCount	Unsigned32

TlpUpsInputEntry
SEQUENCE
	tlpUpsInputLineBads	INTEGER
	tlpUpsInputNominalVoltage	Unsigned32
	tlpUpsInputNominalFrequency	Unsigned32
	tlpUpsInputLowTransferVoltage	Unsigned32
	tlpUpsInputLowTransferVoltageLowerBound	Unsigned32
	tlpUpsInputLowTransferVoltageUpperBound	Unsigned32
	tlpUpsInputHighTransferVoltage	Unsigned32
	tlpUpsInputHighTransferVoltageLowerBound	Unsigned32
	tlpUpsInputHighTransferVoltageUpperBound	Unsigned32
	tlpUpsInputWattHours	Unsigned32

TlpUpsInputPhaseEntry
SEQUENCE
	tlpUpsInputPhaseIndex	Unsigned32
	tlpUpsInputPhaseFrequency	Unsigned32
	tlpUpsInputPhaseVoltage	Unsigned32
	tlpUpsInputPhaseVoltageMin	Unsigned32
	tlpUpsInputPhaseVoltageMax	Unsigned32
	tlpUpsInputPhaseCurrent	Unsigned32
	tlpUpsInputPhasePower	Unsigned32

TlpUpsOutputEntry
SEQUENCE
	tlpUpsOutputSource	INTEGER
	tlpUpsOutputNominalVoltage	Unsigned32
	tlpUpsOutputFrequency	Unsigned32
	tlpUpsOutputVARating	Unsigned32

TlpUpsOutputLineEntry
SEQUENCE
	tlpUpsOutputLineIndex	Unsigned32
	tlpUpsOutputLineVoltage	Unsigned32
	tlpUpsOutputLineCurrent	Unsigned32
	tlpUpsOutputLinePower	Unsigned32
	tlpUpsOutputLinePercentLoad	INTEGER
	tlpUpsOutputLineFrequency	Unsigned32

TlpUpsBypassEntry
SEQUENCE
	tlpUpsBypassFrequency	Unsigned32

TlpUpsBypassLineEntry
SEQUENCE
	tlpUpsBypassLineIndex	Unsigned32
	tlpUpsBypassLineVoltage	Unsigned32
	tlpUpsBypassLineCurrent	Unsigned32
	tlpUpsBypassLinePower	Unsigned32

TlpUpsOutletEntry
SEQUENCE
	tlpUpsOutletIndex	Unsigned32
	tlpUpsOutletName	DisplayString
	tlpUpsOutletDescription	DisplayString
	tlpUpsOutletState	INTEGER
	tlpUpsOutletControllable	TruthValue
	tlpUpsOutletCommand	INTEGER
	tlpUpsOutletVoltage	Unsigned32
	tlpUpsOutletCurrent	Unsigned32
	tlpUpsOutletPower	Unsigned32
	tlpUpsOutletRampAction	INTEGER
	tlpUpsOutletRampDelay	Integer32
	tlpUpsOutletShedAction	INTEGER
	tlpUpsOutletShedDelay	Integer32
	tlpUpsOutletGroup	Integer32

TlpUpsOutletGroupEntry
SEQUENCE
	tlpUpsOutletGroupIndex	Unsigned32
	tlpUpsOutletGroupRowStatus	RowStatus
	tlpUpsOutletGroupName	DisplayString
	tlpUpsOutletGroupDescription	DisplayString
	tlpUpsOutletGroupState	INTEGER
	tlpUpsOutletGroupCommand	INTEGER

TlpUpsWatchdogEntry
SEQUENCE
	tlpUpsWatchdogSupported	TruthValue
	tlpUpsWatchdogSecsBeforeReboot	Unsigned32

TlpUpsFanEntry
SEQUENCE
	tlpUpsFanIndex	Unsigned32
	tlpUpsFanSpeed	Unsigned32

TlpUpsControlEntry
SEQUENCE
	tlpUpsControlSelfTest	TruthValue
	tlpUpsControlRamp	TruthValue
	tlpUpsControlShed	TruthValue
	tlpUpsControlUpsOn	TruthValue
	tlpUpsControlUpsOff	TruthValue
	tlpUpsControlUpsReboot	TruthValue
	tlpUpsControlBypass	INTEGER
	tlpUpsControlResetWattHours	TruthValue

TlpUpsConfigEntry
SEQUENCE
	tlpUpsConfigInputVoltage	Unsigned32
	tlpUpsConfigInputFrequency	Unsigned32
	tlpUpsConfigOutputVoltage	Unsigned32
	tlpUpsConfigOutputFrequency	Unsigned32
	tlpUpsConfigAudibleStatus	INTEGER
	tlpUpsConfigAutoBatteryTest	INTEGER
	tlpUpsConfigAutoRestartAfterShutdown	INTEGER
	tlpUpsConfigAutoRampOnTransition	INTEGER
	tlpUpsConfigAutoShedOnTransition	INTEGER
	tlpUpsConfigBypassLowerLimitPercent	INTEGER
	tlpUpsConfigBypassUpperLimitPercent	INTEGER
	tlpUpsConfigBypassLowerLimitVoltage	Unsigned32
	tlpUpsConfigBypassUpperLimitVoltage	Unsigned32
	tlpUpsConfigColdStart	INTEGER
	tlpUpsConfigEconomicMode	INTEGER
	tlpUpsConfigFaultAction	INTEGER
	tlpUpsConfigOffMode	INTEGER
	tlpUpsConfigLineSensitivity	INTEGER

TlpUpsConfigAutoRestartEntry
SEQUENCE
	tlpUpsConfigAutoRestartInverterShutdown	INTEGER
	tlpUpsConfigAutoRestartDelayedWakeup	INTEGER
	tlpUpsConfigAutoRestartLowVoltageCutoff	INTEGER
	tlpUpsConfigAutoRestartOverLoad	INTEGER
	tlpUpsConfigAutoRestartOverTemperature	INTEGER

TlpUpsConfigThresholdEntry
SEQUENCE
	tlpUpsConfigBatteryAgeThreshold	Unsigned32
	tlpUpsConfigLowBatteryThreshold	INTEGER
	tlpUpsConfigLowBatteryTime	Unsigned32
	tlpUpsConfigOverLoadThreshold	INTEGER

TlpPduIdentEntry
SEQUENCE
	tlpPduIdentNumInputs	Unsigned32
	tlpPduIdentNumOutputs	Unsigned32
	tlpPduIdentNumPhases	Unsigned32
	tlpPduIdentNumOutlets	Unsigned32
	tlpPduIdentNumOutletGroups	Unsigned32
	tlpPduIdentNumCircuits	Unsigned32
	tlpPduIdentNumBreakers	Unsigned32
	tlpPduIdentNumHeatsinks	Unsigned32

TlpPduSupportsEntry
SEQUENCE
	tlpPduSupportsEnergywise	TruthValue
	tlpPduSupportsRampShed	TruthValue
	tlpPduSupportsOutletGroup	TruthValue
	tlpPduSupportsOutletCurrentPower	TruthValue
	tlpPduSupportsOutletVoltage	TruthValue

TlpPduDisplayEntry
SEQUENCE
	tlpPduDisplayScheme	INTEGER
	tlpPduDisplayOrientation	INTEGER
	tlpPduDisplayAutoScroll	INTEGER
	tlpPduDisplayIntensity	INTEGER
	tlpPduDisplayUnits	INTEGER

TlpPduDeviceEntry
SEQUENCE
	tlpPduDeviceMainLoadState	INTEGER
	tlpPduDeviceMainLoadControllable	TruthValue
	tlpPduDeviceMainLoadCommand	INTEGER
	tlpPduDevicePowerOnDelay	Integer32
	tlpPduDeviceTotalInputPowerRating	Integer32
	tlpPduDeviceTemperatureC	Integer32
	tlpPduDeviceTemperatureF	Integer32
	tlpPduDevicePhaseImbalance	INTEGER
	tlpPduDeviceOutputPowerTotal	Unsigned32
	tlpPduDeviceAggregatePowerFactor	Unsigned32
	tlpPduDeviceOutputCurrentPrecision	INTEGER

TlpPduInputEntry
SEQUENCE
	tlpPduInputNominalVoltage	Unsigned32
	tlpPduInputNominalVoltagePhaseToPhase	Unsigned32
	tlpPduInputNominalVoltagePhaseToNeutral	Unsigned32
	tlpPduInputLowTransferVoltage	Unsigned32
	tlpPduInputLowTransferVoltageLowerBound	Unsigned32
	tlpPduInputLowTransferVoltageUpperBound	Unsigned32
	tlpPduInputHighTransferVoltage	Unsigned32
	tlpPduInputHighTransferVoltageLowerBound	Unsigned32
	tlpPduInputHighTransferVoltageUpperBound	Unsigned32
	tlpPduInputCurrentLimit	Unsigned32

TlpPduInputPhaseEntry
SEQUENCE
	tlpPduInputPhaseIndex	Unsigned32
	tlpPduInputPhasePhaseType	INTEGER
	tlpPduInputPhaseFrequency	Unsigned32
	tlpPduInputPhaseVoltage	Unsigned32
	tlpPduInputPhaseVoltageMin	Unsigned32
	tlpPduInputPhaseVoltageMax	Unsigned32
	tlpPduInputPhaseCurrent	Unsigned32

TlpPduOutputEntry
SEQUENCE
	tlpPduOutputIndex	Unsigned32
	tlpPduOutputPhase	INTEGER
	tlpPduOutputPhaseType	INTEGER
	tlpPduOutputVoltage	Unsigned32
	tlpPduOutputCurrent	Unsigned32
	tlpPduOutputCurrentMin	Unsigned32
	tlpPduOutputCurrentMax	Unsigned32
	tlpPduOutputActivePower	Unsigned32
	tlpPduOutputPowerFactor	Unsigned32
	tlpPduOutputSource	INTEGER
	tlpPduOutputFrequency	Unsigned32
	tlpPduOutputCalculatedPowerKVA	Unsigned32
	tlpPduOutputCalculatedPowerKW	Unsigned32
	tlpPduOutputCalculated24hrEnergy	Unsigned32

TlpPduOutletEntry
SEQUENCE
	tlpPduOutletIndex	Unsigned32
	tlpPduOutletName	DisplayString
	tlpPduOutletDescription	DisplayString
	tlpPduOutletState	INTEGER
	tlpPduOutletControllable	TruthValue
	tlpPduOutletCommand	INTEGER
	tlpPduOutletVoltage	Unsigned32
	tlpPduOutletCurrent	Unsigned32
	tlpPduOutletPower	Unsigned32
	tlpPduOutletRampAction	INTEGER
	tlpPduOutletRampDelay	Integer32
	tlpPduOutletShedAction	INTEGER
	tlpPduOutletShedDelay	Integer32
	tlpPduOutletGroup	Integer32
	tlpPduOutletBank	Integer32
	tlpPduOutletCircuit	Integer32
	tlpPduOutletPhase	INTEGER

TlpPduOutletGroupEntry
SEQUENCE
	tlpPduOutletGroupIndex	Unsigned32
	tlpPduOutletGroupRowStatus	RowStatus
	tlpPduOutletGroupName	DisplayString
	tlpPduOutletGroupDescription	DisplayString
	tlpPduOutletGroupState	INTEGER
	tlpPduOutletGroupCommand	INTEGER

TlpPduCircuitEntry
SEQUENCE
	tlpPduCircuitIndex	Unsigned32
	tlpPduCircuitPhase	INTEGER
	tlpPduCircuitInputVoltage	Integer32
	tlpPduCircuitTotalCurrent	Integer32
	tlpPduCircuitCurrentLimit	Integer32
	tlpPduCircuitCurrentMin	Integer32
	tlpPduCircuitCurrentMax	Integer32
	tlpPduCircuitTotalPower	Integer32
	tlpPduCircuitPowerFactor	INTEGER
	tlpPduCircuitUtilization	Unsigned32

TlpPduBreakerEntry
SEQUENCE
	tlpPduBreakerIndex	Unsigned32
	tlpPduBreakerStatus	INTEGER

TlpPduHeatsinkEntry
SEQUENCE
	tlpPduHeatsinkIndex	Unsigned32
	tlpPduHeatsinkStatus	INTEGER
	tlpPduHeatsinkTemperatureC	Integer32
	tlpPduHeatsinkTemperatureF	Integer32

TlpPduControlEntry
SEQUENCE
	tlpPduControlRamp	TruthValue
	tlpPduControlShed	TruthValue
	tlpPduControlPduOn	TruthValue
	tlpPduControlPduOff	TruthValue
	tlpPduControlPduReboot	TruthValue

TlpPduConfigEntry
SEQUENCE
	tlpPduConfigInputVoltage	Unsigned32

TlpPduConfigPhaseThresholdEntry
SEQUENCE
	tlpPduPhaseIndex	Unsigned32
	tlpPduConfigOutputCurrentThresholdTolerance	Unsigned32
	tlpPduConfigOutputCurrentHighThreshold	Unsigned32
	tlpPduConfigOutputCurrentLowThreshold	Unsigned32

TlpEnvIdentEntry
SEQUENCE
	tlpEnvIdentTempSupported	TruthValue
	tlpEnvIdentHumiditySupported	TruthValue
	tlpEnvNumInputContacts	Unsigned32
	tlpEnvNumOutputContacts	Unsigned32

TlpEnvTemperatureEntry
SEQUENCE
	tlpEnvTemperatureC	Integer32
	tlpEnvTemperatureF	Integer32
	tlpEnvTemperatureInAlarm	TruthValue

TlpEnvHumidityEntry
SEQUENCE
	tlpEnvHumidityHumidity	INTEGER
	tlpEnvHumidityInAlarm	TruthValue

TlpEnvInputContactEntry
SEQUENCE
	tlpEnvInputContactIndex	Unsigned32
	tlpEnvInputContactName	DisplayString
	tlpEnvInputContactNormalState	INTEGER
	tlpEnvInputContactCurrentState	INTEGER
	tlpEnvInputContactInAlarm	TruthValue

TlpEnvOutputContactEntry
SEQUENCE
	tlpEnvOutputContactIndex	Unsigned32
	tlpEnvOutputContactName	DisplayString
	tlpEnvOutputContactNormalState	INTEGER
	tlpEnvOutputContactCurrentState	INTEGER
	tlpEnvOutputContactInAlarm	TruthValue

TlpEnvConfigEntry
SEQUENCE
	tlpEnvTemperatureLowLimit	Integer32
	tlpEnvTemperatureHighLimit	Integer32
	tlpEnvHumidityLowLimit	INTEGER
	tlpEnvHumidityHighLimit	INTEGER

TlpAtsIdentEntry
SEQUENCE
	tlpAtsIdentNumInputs	Unsigned32
	tlpAtsIdentNumOutputs	Unsigned32
	tlpAtsIdentNumPhases	Unsigned32
	tlpAtsIdentNumOutlets	Unsigned32
	tlpAtsIdentNumOutletGroups	Unsigned32
	tlpAtsIdentNumCircuits	Unsigned32
	tlpAtsIdentNumBreakers	Unsigned32
	tlpAtsIdentNumHeatsinks	Unsigned32

TlpAtsSupportsEntry
SEQUENCE
	tlpAtsSupportsEnergywise	TruthValue
	tlpAtsSupportsRampShed	TruthValue
	tlpAtsSupportsOutletGroup	TruthValue
	tlpAtsSupportsOutletCurrentPower	TruthValue
	tlpAtsSupportsOutletVoltage	TruthValue

TlpAtsDisplayEntry
SEQUENCE
	tlpAtsDisplayScheme	INTEGER
	tlpAtsDisplayOrientation	INTEGER
	tlpAtsDisplayAutoScroll	INTEGER
	tlpAtsDisplayIntensity	INTEGER
	tlpAtsDisplayUnits	INTEGER

TlpAtsDeviceEntry
SEQUENCE
	tlpAtsDeviceMainLoadState	INTEGER
	tlpAtsDeviceMainLoadControllable	TruthValue
	tlpAtsDeviceMainLoadCommand	INTEGER
	tlpAtsDevicePowerOnDelay	Integer32
	tlpAtsDeviceTotalInputPowerRating	Integer32
	tlpAtsDeviceTemperatureC	Integer32
	tlpAtsDeviceTemperatureF	Integer32
	tlpAtsDevicePhaseImbalance	INTEGER
	tlpAtsDeviceOutputPowerTotal	Unsigned32
	tlpAtsDeviceAggregatePowerFactor	Unsigned32
	tlpAtsDeviceOutputCurrentPrecision	INTEGER
	tlpAtsDeviceGeneralFault	TruthValue

TlpAtsInputEntry
SEQUENCE
	tlpAtsInputNominalVoltage	Unsigned32
	tlpAtsInputNominalVoltagePhaseToPhase	Unsigned32
	tlpAtsInputNominalVoltagePhaseToNeutral	Unsigned32
	tlpAtsInputBadTransferVoltage	Unsigned32
	tlpAtsInputBadTransferVoltageLowerBound	Unsigned32
	tlpAtsInputBadTransferVoltageUpperBound	Unsigned32
	tlpAtsInputHighTransferVoltage	Unsigned32
	tlpAtsInputHighTransferVoltageLowerBound	Unsigned32
	tlpAtsInputHighTransferVoltageUpperBound	Unsigned32
	tlpAtsInputFairVoltageThreshold	Unsigned32
	tlpAtsInputBadVoltageThreshold	Unsigned32
	tlpAtsInputSourceAvailability	INTEGER
	tlpAtsInputSourceInUse	INTEGER
	tlpAtsInputSourceTransitionCount	Unsigned32
	tlpAtsInputCurrentLimit	Unsigned32

TlpAtsInputPhaseEntry
SEQUENCE
	tlpAtsInputLineIndex	Unsigned32
	tlpAtsInputPhaseIndex	Unsigned32
	tlpAtsInputPhaseType	INTEGER
	tlpAtsInputPhaseFrequency	Unsigned32
	tlpAtsInputPhaseVoltage	Unsigned32
	tlpAtsInputPhaseVoltageMin	Unsigned32
	tlpAtsInputPhaseVoltageMax	Unsigned32
	tlpAtsInputPhaseCurrent	Unsigned32

TlpAtsOutputEntry
SEQUENCE
	tlpAtsOutputIndex	Unsigned32
	tlpAtsOutputPhase	INTEGER
	tlpAtsOutputPhaseType	INTEGER
	tlpAtsOutputVoltage	Unsigned32
	tlpAtsOutputCurrent	Unsigned32
	tlpAtsOutputCurrentMin	Unsigned32
	tlpAtsOutputCurrentMax	Unsigned32
	tlpAtsOutputActivePower	Unsigned32
	tlpAtsOutputPowerFactor	Unsigned32
	tlpAtsOutputSource	INTEGER
	tlpAtsOutputFrequency	Unsigned32
	tlpAtsOutputCalculatedPowerKVA	Unsigned32
	tlpAtsOutputCalculatedPowerKW	Unsigned32
	tlpAtsOutputCalculated24hrEnergy	Unsigned32

TlpAtsOutletEntry
SEQUENCE
	tlpAtsOutletIndex	Unsigned32
	tlpAtsOutletName	DisplayString
	tlpAtsOutletDescription	DisplayString
	tlpAtsOutletState	INTEGER
	tlpAtsOutletControllable	TruthValue
	tlpAtsOutletCommand	INTEGER
	tlpAtsOutletVoltage	Unsigned32
	tlpAtsOutletCurrent	Unsigned32
	tlpAtsOutletPower	Unsigned32
	tlpAtsOutletRampAction	INTEGER
	tlpAtsOutletRampDelay	Integer32
	tlpAtsOutletShedAction	INTEGER
	tlpAtsOutletShedDelay	Integer32
	tlpAtsOutletGroup	Integer32
	tlpAtsOutletBank	Integer32
	tlpAtsOutletCircuit	Integer32
	tlpAtsOutletPhase	INTEGER

TlpAtsOutletGroupEntry
SEQUENCE
	tlpAtsOutletGroupIndex	Unsigned32
	tlpAtsOutletGroupRowStatus	RowStatus
	tlpAtsOutletGroupName	DisplayString
	tlpAtsOutletGroupDescription	DisplayString
	tlpAtsOutletGroupState	INTEGER
	tlpAtsOutletGroupCommand	INTEGER

TlpAtsCircuitEntry
SEQUENCE
	tlpAtsCircuitIndex	Unsigned32
	tlpAtsCircuitPhase	INTEGER
	tlpAtsCircuitInputVoltage	Integer32
	tlpAtsCircuitTotalCurrent	Integer32
	tlpAtsCircuitCurrentLimit	Integer32
	tlpAtsCircuitCurrentMin	Integer32
	tlpAtsCircuitCurrentMax	Integer32
	tlpAtsCircuitTotalPower	Integer32
	tlpAtsCircuitPowerFactor	INTEGER
	tlpAtsCircuitUtilization	Unsigned32

TlpAtsBreakerEntry
SEQUENCE
	tlpAtsBreakerIndex	Unsigned32
	tlpAtsBreakerStatus	INTEGER

TlpAtsHeatsinkEntry
SEQUENCE
	tlpAtsHeatsinkIndex	Unsigned32
	tlpAtsHeatsinkStatus	INTEGER
	tlpAtsHeatsinkTemperatureC	Integer32
	tlpAtsHeatsinkTemperatureF	Integer32

TlpAtsControlEntry
SEQUENCE
	tlpAtsControlRamp	TruthValue
	tlpAtsControlShed	TruthValue
	tlpAtsControlAtsOn	TruthValue
	tlpAtsControlAtsOff	TruthValue
	tlpAtsControlAtsReboot	TruthValue
	tlpAtsControlResetGeneralFault	TruthValue

TlpAtsConfigEntry
SEQUENCE
	tlpAtsConfigInputVoltage	Unsigned32
	tlpAtsConfigSourceSelect	INTEGER
	tlpAtsConfigSource1ReturnTime	Unsigned32
	tlpAtsConfigSource2ReturnTime	Unsigned32
	tlpAtsConfigAutoRampOnTransition	INTEGER
	tlpAtsConfigAutoShedOnTransition	INTEGER

TlpAtsConfigVoltageRangeOldEntry
SEQUENCE
	tlpAtsConfigHighVoltageTransferOld	Unsigned32
	tlpAtsConfigHighVoltageResetOld	Unsigned32
	tlpAtsConfigSource1TransferResetOld	Unsigned32
	tlpAtsConfigSource1BrownoutSetOld	Unsigned32
	tlpAtsConfigSource1TransferSetOld	Unsigned32
	tlpAtsConfigSource2TransferResetOld	Unsigned32
	tlpAtsConfigSource2BrownoutSetOld	Unsigned32
	tlpAtsConfigSource2TransferSetOld	Unsigned32
	tlpAtsConfigLowVoltageResetOld	Unsigned32
	tlpAtsConfigLowVoltageTransferOld	Unsigned32

TlpAtsConfigVoltageRangeLimitsEntry
SEQUENCE
	tlpAtsConfigSourceBrownoutSetMinimum	Unsigned32
	tlpAtsConfigSourceBrownoutSetMaximum	Unsigned32
	tlpAtsConfigSourceTransferSetMinimum	Unsigned32
	tlpAtsConfigSourceTransferSetMaximum	Unsigned32

TlpAtsConfigThresholdEntry
SEQUENCE
	tlpAtsConfigOutputCurrentThreshold	Unsigned32
	tlpAtsConfigOverTemperatureThreshold	Unsigned32
	tlpAtsConfigOverVoltageThreshold	Unsigned32
	tlpAtsConfigOverLoadThreshold	Unsigned32

TlpAtsConfigVoltageRangeEntry
SEQUENCE
	tlpAtsConfigHighVoltageTransfer	Unsigned32
	tlpAtsConfigHighVoltageReset	Unsigned32
	tlpAtsConfigTransferReset	Unsigned32
	tlpAtsConfigBrownoutSet	Unsigned32
	tlpAtsConfigTransferSet	Unsigned32
	tlpAtsConfigLowVoltageReset	Unsigned32
	tlpAtsConfigLowVoltageTransfer	Unsigned32

TlpAtsConfigPhaseThresholdEntry
SEQUENCE
	tlpAtsPhaseIndex	Unsigned32
	tlpAtsConfigOutputCurrentThresholdTolerance	Unsigned32
	tlpAtsConfigOutputCurrentHighThreshold	Unsigned32
	tlpAtsConfigOutputCurrentLowThreshold	Unsigned32

TlpCoolingCurrentEntry
SEQUENCE
	tlpCoolingUnitCurrent	Unsigned32
	tlpCoolingCompressorCurrent	Unsigned32
	tlpCoolingEvaporatorFanCurrent	Unsigned32
	tlpCoolingCondenserFanCurrent	Unsigned32

TlpCoolingTemperatureFahrenheitEntry
SEQUENCE
	tlpCoolingAmbientDegF	Integer32
	tlpCoolingSupplyAirDegF	Integer32
	tlpCoolingReturnAirDegF	Integer32
	tlpCoolingCondenserInletDegF	Integer32
	tlpCoolingEvaporatorDegF	Integer32
	tlpCoolingSuctionDegF	Integer32
	tlpCoolingRemoteDegF	Integer32
	tlpCoolingCondenserOutletDegF	Integer32

TlpCoolingTemperatureCelsiusEntry
SEQUENCE
	tlpCoolingAmbientDegC	Integer32
	tlpCoolingSupplyAirDegC	Integer32
	tlpCoolingReturnAirDegC	Integer32
	tlpCoolingCondenserInletDegC	Integer32
	tlpCoolingEvaporatorDegC	Integer32
	tlpCoolingSuctionDegC	Integer32
	tlpCoolingRemoteDegC	Integer32
	tlpCoolingCondenserOutletDegC	Integer32

TlpCoolingPressureMpaEntry
SEQUENCE
	tlpCoolingSuctionPressureMpa	Unsigned32
	tlpCoolingDischargePressureMpa	Unsigned32

TlpCoolingPressurePsiEntry
SEQUENCE
	tlpCoolingSuctionPressurePsi	Unsigned32
	tlpCoolingDischargePressurePsi	Unsigned32

TlpCoolingDynamicEntry
SEQUENCE
	tlpCoolingEvaporatorFanSpeed	INTEGER
	tlpCoolingCondenserFanSpeed	INTEGER
	tlpCoolingCompressorFrequency	Unsigned32
	tlpCoolingEEVSteps	INTEGER

TlpCoolingRuntimeEntry
SEQUENCE
	tlpCoolingCompressorRunDays	Unsigned32
	tlpCoolingCondensatePumpRunDays	Unsigned32
	tlpCoolingAirFilterRunHours	Unsigned32
	tlpCoolingEvaporatorFanRunDays	Unsigned32
	tlpCoolingCondenserFanRunDays	Unsigned32
	tlpCoolingAtomizerRunDays	Unsigned32

TlpCoolingStatusEntry
SEQUENCE
	tlpCoolingOperatingMode	INTEGER
	tlpCoolingCoolOutput	Unsigned32
	tlpCoolingAlarmStatus	INTEGER
	tlpCoolingCompressorStatus	INTEGER
	tlpCoolingWaterStatus	INTEGER

TlpCoolingControlEntry
SEQUENCE
	tlpCoolingOnOff	INTEGER

TlpCoolingConfigEntry
SEQUENCE
	tlpCoolingAutoStart	INTEGER
	tlpCoolingFanSpeed	INTEGER
	tlpCoolingControlType	INTEGER
	tlpCoolingDisplayUnits	INTEGER
	tlpCoolingBeepOnKey	INTEGER
	tlpCoolingInputContactType	INTEGER
	tlpCoolingOutputContactType	INTEGER
	tlpCoolingOutputRelaySource	INTEGER
	tlpCoolingOutputRelayDefault	INTEGER
	tlpCoolingOffOnInputContact	INTEGER
	tlpCoolingOffOnLeak	INTEGER
	tlpCoolingWaterLeakContactType	INTEGER
	tlpCoolingAirFilterInterval	Unsigned32
	tlpCoolingAirFilterAlarm	INTEGER
	tlpCoolingMaxAirFilterRunHours	Unsigned32
	tlpCoolingStartTimer	Unsigned32
	tlpCoolingStopTimer	Unsigned32
	tlpCoolingEnergyMode	INTEGER
	tlpCoolingDefrostMode	INTEGER
	tlpCoolingRemoteTemperatureSensor	INTEGER
	tlpCoolingDehumidifyingMode	INTEGER
	tlpCoolingFanAlwaysOn	INTEGER
	tlpCoolingQuietMode	INTEGER
	tlpCoolingHotGasBypass	INTEGER
	tlpCoolingAutoFanSpeed	INTEGER

TlpCoolingConfigTemperatureFahrenheitEntry
SEQUENCE
	tlpCoolingSetPointDegF	Integer32
	tlpCoolingSupplyAirHighLimitDegF	Integer32
	tlpCoolingSupplyAirLowLimitDegF	Integer32
	tlpCoolingMaxDeviationLimitDegF	Integer32
	tlpCoolingReturnAirHighLimitDegF	Integer32
	tlpCoolingReturnAirLowLimitDegF	Integer32
	tlpCoolingRemoteSetPointDegF	Integer32

TlpCoolingConfigTemperatureCelsiusEntry
SEQUENCE
	tlpCoolingSetPointDegC	Integer32
	tlpCoolingSupplyAirHighLimitDegC	Integer32
	tlpCoolingSupplyAirLowLimitDegC	Integer32
	tlpCoolingMaxDeviationLimitDegC	Integer32
	tlpCoolingReturnAirHighLimitDegC	Integer32
	tlpCoolingReturnAirLowLimitDegC	Integer32
	tlpCoolingRemoteSetPointDegC	Integer32

TlpAgentEmailContactEntry
SEQUENCE
	tlpAgentEmailContactIndex	Unsigned32
	tlpAgentEmailContactRowStatus	RowStatus
	tlpAgentEmailContactName	DisplayString
	tlpAgentEmailContactAddress	DisplayString

TlpAgentSnmpContactEntry
SEQUENCE
	tlpAgentSnmpContactIndex	Unsigned32
	tlpAgentSnmpContactRowStatus	RowStatus
	tlpAgentSnmpContactName	DisplayString
	tlpAgentSnmpContactIpAddress	DisplayString
	tlpAgentSnmpContactPort	Unsigned32
	tlpAgentSnmpContactSnmpVersion	INTEGER
	tlpAgentSnmpContactSecurityName	DisplayString
	tlpAgentSnmpContactPrivPassword	DisplayString
	tlpAgentSnmpContactAuthPassword	DisplayString

TlpDeviceAlarmEntry
SEQUENCE
	tlpAlarmId	Unsigned32
	tlpAlarmDescr	OBJECT IDENTIFIER
	tlpAlarmTime	TimeStamp
	tlpAlarmTableRef	OBJECT IDENTIFIER
	tlpAlarmTableRowRef	OBJECT IDENTIFIER
	tlpAlarmDetail	DisplayString
	tlpAlarmType	INTEGER
	tlpAlarmState	INTEGER
	tlpAlarmAcknowledged	INTEGER

TlpAlarmControlEntry
SEQUENCE
	tlpAlarmControlIndex	Unsigned32
	tlpAlarmControlDescr	OBJECT IDENTIFIER
	tlpAlarmControlDetail	DisplayString
	tlpAlarmControlSeverity	INTEGER

Defined Values

tlpProducts		1.3.6.1.4.1.850.1
This MIB module defines MIB objects which provide mechanisms for remote management capabilities of Tripp Lite PowerAlert and related software.
MODULE-IDENTITY

tlpHardware		1.3.6.1.4.1.850.1.1
OBJECT IDENTIFIER

tlpSoftware		1.3.6.1.4.1.850.1.2
OBJECT IDENTIFIER

tlpAlarms		1.3.6.1.4.1.850.1.3
OBJECT IDENTIFIER

tlpNotify		1.3.6.1.4.1.850.1.4
OBJECT IDENTIFIER

tlpDevice		1.3.6.1.4.1.850.1.1.1
OBJECT IDENTIFIER

tlpDeviceDetail		1.3.6.1.4.1.850.1.1.2
OBJECT IDENTIFIER

tlpDeviceTypes		1.3.6.1.4.1.850.1.1.3
OBJECT IDENTIFIER

tlpUps		1.3.6.1.4.1.850.1.1.3.1
OBJECT IDENTIFIER

tlpPdu		1.3.6.1.4.1.850.1.1.3.2
OBJECT IDENTIFIER

tlpEnvirosense		1.3.6.1.4.1.850.1.1.3.3
OBJECT IDENTIFIER

tlpAts		1.3.6.1.4.1.850.1.1.3.4
OBJECT IDENTIFIER

tlpCooling		1.3.6.1.4.1.850.1.1.3.5
OBJECT IDENTIFIER

tlpKvm		1.3.6.1.4.1.850.1.1.3.6
OBJECT IDENTIFIER

tlpRackTrack		1.3.6.1.4.1.850.1.1.3.7
OBJECT IDENTIFIER

tlpSwitch		1.3.6.1.4.1.850.1.1.3.8
OBJECT IDENTIFIER

tlpUpsIdent		1.3.6.1.4.1.850.1.1.3.1.1
OBJECT IDENTIFIER

tlpUpsDevice		1.3.6.1.4.1.850.1.1.3.1.2
OBJECT IDENTIFIER

tlpUpsDetail		1.3.6.1.4.1.850.1.1.3.1.3
OBJECT IDENTIFIER

tlpUpsControl		1.3.6.1.4.1.850.1.1.3.1.4
OBJECT IDENTIFIER

tlpUpsConfig		1.3.6.1.4.1.850.1.1.3.1.5
OBJECT IDENTIFIER

tlpUpsBattery		1.3.6.1.4.1.850.1.1.3.1.3.1
OBJECT IDENTIFIER

tlpUpsInput		1.3.6.1.4.1.850.1.1.3.1.3.2
OBJECT IDENTIFIER

tlpUpsOutput		1.3.6.1.4.1.850.1.1.3.1.3.3
OBJECT IDENTIFIER

tlpUpsBypass		1.3.6.1.4.1.850.1.1.3.1.3.4
OBJECT IDENTIFIER

tlpUpsOutlet		1.3.6.1.4.1.850.1.1.3.1.3.5
OBJECT IDENTIFIER

tlpUpsWatchdog		1.3.6.1.4.1.850.1.1.3.1.3.6
OBJECT IDENTIFIER

tlpUpsFan		1.3.6.1.4.1.850.1.1.3.1.3.7
OBJECT IDENTIFIER

tlpPduIdent		1.3.6.1.4.1.850.1.1.3.2.1
OBJECT IDENTIFIER

tlpPduDevice		1.3.6.1.4.1.850.1.1.3.2.2
OBJECT IDENTIFIER

tlpPduDetail		1.3.6.1.4.1.850.1.1.3.2.3
OBJECT IDENTIFIER

tlpPduControl		1.3.6.1.4.1.850.1.1.3.2.4
OBJECT IDENTIFIER

tlpPduConfig		1.3.6.1.4.1.850.1.1.3.2.5
OBJECT IDENTIFIER

tlpPduInput		1.3.6.1.4.1.850.1.1.3.2.3.1
OBJECT IDENTIFIER

tlpPduOutput		1.3.6.1.4.1.850.1.1.3.2.3.2
OBJECT IDENTIFIER

tlpPduOutlet		1.3.6.1.4.1.850.1.1.3.2.3.3
OBJECT IDENTIFIER

tlpPduCircuit		1.3.6.1.4.1.850.1.1.3.2.3.4
OBJECT IDENTIFIER

tlpPduBreaker		1.3.6.1.4.1.850.1.1.3.2.3.5
OBJECT IDENTIFIER

tlpPduHeatsink		1.3.6.1.4.1.850.1.1.3.2.3.6
OBJECT IDENTIFIER

tlpEnvIdent		1.3.6.1.4.1.850.1.1.3.3.1
OBJECT IDENTIFIER

tlpEnvDetail		1.3.6.1.4.1.850.1.1.3.3.3
OBJECT IDENTIFIER

tlpEnvConfig		1.3.6.1.4.1.850.1.1.3.3.5
OBJECT IDENTIFIER

tlpAtsIdent		1.3.6.1.4.1.850.1.1.3.4.1
OBJECT IDENTIFIER

tlpAtsDevice		1.3.6.1.4.1.850.1.1.3.4.2
OBJECT IDENTIFIER

tlpAtsDetail		1.3.6.1.4.1.850.1.1.3.4.3
OBJECT IDENTIFIER

tlpAtsControl		1.3.6.1.4.1.850.1.1.3.4.4
OBJECT IDENTIFIER

tlpAtsConfig		1.3.6.1.4.1.850.1.1.3.4.5
OBJECT IDENTIFIER

tlpAtsInput		1.3.6.1.4.1.850.1.1.3.4.3.1
OBJECT IDENTIFIER

tlpAtsOutput		1.3.6.1.4.1.850.1.1.3.4.3.2
OBJECT IDENTIFIER

tlpAtsOutlet		1.3.6.1.4.1.850.1.1.3.4.3.3
OBJECT IDENTIFIER

tlpAtsCircuit		1.3.6.1.4.1.850.1.1.3.4.3.4
OBJECT IDENTIFIER

tlpAtsBreaker		1.3.6.1.4.1.850.1.1.3.4.3.5
OBJECT IDENTIFIER

tlpAtsHeatsink		1.3.6.1.4.1.850.1.1.3.4.3.6
OBJECT IDENTIFIER

tlpCoolingIdent		1.3.6.1.4.1.850.1.1.3.5.1
OBJECT IDENTIFIER

tlpCoolingDevice		1.3.6.1.4.1.850.1.1.3.5.2
OBJECT IDENTIFIER

tlpCoolingDetail		1.3.6.1.4.1.850.1.1.3.5.3
OBJECT IDENTIFIER

tlpCoolingControl		1.3.6.1.4.1.850.1.1.3.5.4
OBJECT IDENTIFIER

tlpCoolingConfig		1.3.6.1.4.1.850.1.1.3.5.5
OBJECT IDENTIFIER

tlpCoolingTemperature		1.3.6.1.4.1.850.1.1.3.5.3.1
OBJECT IDENTIFIER

tlpCoolingPressure		1.3.6.1.4.1.850.1.1.3.5.3.2
OBJECT IDENTIFIER

tlpKvmIdent		1.3.6.1.4.1.850.1.1.3.6.1
OBJECT IDENTIFIER

tlpKvmDevice		1.3.6.1.4.1.850.1.1.3.6.2
OBJECT IDENTIFIER

tlpKvmDetail		1.3.6.1.4.1.850.1.1.3.6.3
OBJECT IDENTIFIER

tlpKvmControl		1.3.6.1.4.1.850.1.1.3.6.4
OBJECT IDENTIFIER

tlpKvmConfig		1.3.6.1.4.1.850.1.1.3.6.5
OBJECT IDENTIFIER

tlpRackTrackIdent		1.3.6.1.4.1.850.1.1.3.7.1
OBJECT IDENTIFIER

tlpRackTrackDevice		1.3.6.1.4.1.850.1.1.3.7.2
OBJECT IDENTIFIER

tlpRackTrackDetail		1.3.6.1.4.1.850.1.1.3.7.3
OBJECT IDENTIFIER

tlpRackTrackControl		1.3.6.1.4.1.850.1.1.3.7.4
OBJECT IDENTIFIER

tlpRackTrackConfig		1.3.6.1.4.1.850.1.1.3.7.5
OBJECT IDENTIFIER

tlpSwitchIdent		1.3.6.1.4.1.850.1.1.3.8.1
OBJECT IDENTIFIER

tlpSwitchDevice		1.3.6.1.4.1.850.1.1.3.8.2
OBJECT IDENTIFIER

tlpSwitchDetail		1.3.6.1.4.1.850.1.1.3.8.3
OBJECT IDENTIFIER

tlpSwitchControl		1.3.6.1.4.1.850.1.1.3.8.4
OBJECT IDENTIFIER

tlpSwitchConfig		1.3.6.1.4.1.850.1.1.3.8.5
OBJECT IDENTIFIER

tlpAgentDetails		1.3.6.1.4.1.850.1.2.1
OBJECT IDENTIFIER

tlpAgentSettings		1.3.6.1.4.1.850.1.2.2
OBJECT IDENTIFIER

tlpAgentContacts		1.3.6.1.4.1.850.1.2.3
OBJECT IDENTIFIER

tlpAgentIdent		1.3.6.1.4.1.850.1.2.1.1
OBJECT IDENTIFIER

tlpAgentAttributes		1.3.6.1.4.1.850.1.2.1.2
OBJECT IDENTIFIER

tlpAgentConfig		1.3.6.1.4.1.850.1.2.2.1
OBJECT IDENTIFIER

tlpAgentEmailContacts		1.3.6.1.4.1.850.1.2.3.1
OBJECT IDENTIFIER

tlpAgentSnmpContacts		1.3.6.1.4.1.850.1.2.3.2
OBJECT IDENTIFIER

tlpAlarmsWellKnown		1.3.6.1.4.1.850.1.3.3
OBJECT IDENTIFIER

tlpAlarmControl		1.3.6.1.4.1.850.1.3.4
OBJECT IDENTIFIER

tlpAgentAlarms		1.3.6.1.4.1.850.1.3.3.1
OBJECT IDENTIFIER

tlpDeviceAlarms		1.3.6.1.4.1.850.1.3.3.2
OBJECT IDENTIFIER

tlpUpsAlarms		1.3.6.1.4.1.850.1.3.3.3
OBJECT IDENTIFIER

tlpPduAlarms		1.3.6.1.4.1.850.1.3.3.4
OBJECT IDENTIFIER

tlpEnvAlarms		1.3.6.1.4.1.850.1.3.3.5
OBJECT IDENTIFIER

tlpAtsAlarms		1.3.6.1.4.1.850.1.3.3.6
OBJECT IDENTIFIER

tlpCoolingAlarms		1.3.6.1.4.1.850.1.3.3.7
OBJECT IDENTIFIER

tlpKvmAlarms		1.3.6.1.4.1.850.1.3.3.8
OBJECT IDENTIFIER

tlpRackTrackAlarms		1.3.6.1.4.1.850.1.3.3.9
OBJECT IDENTIFIER

tlpSwitchAlarms		1.3.6.1.4.1.850.1.3.3.10
OBJECT IDENTIFIER

tlpNotifications		1.3.6.1.4.1.850.1.4.1
OBJECT IDENTIFIER

tlpNotificationsEvent		1.3.6.1.4.1.850.1.4.2
OBJECT IDENTIFIER

tlpNotificationsEventParameters		1.3.6.1.4.1.850.1.4.3
OBJECT IDENTIFIER

tlpDeviceNumDevices		1.3.6.1.4.1.850.1.1.1.1
The number of devices that this agent is currently managing.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpDeviceTable		1.3.6.1.4.1.850.1.1.1.2
A list of device table entries. The number of entries is given by the value of tlpDevicesNumDevices.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		TlpDeviceEntry

tlpDeviceEntry		1.3.6.1.4.1.850.1.1.1.2.1
An entry containing information applicable to a particular device managed by this agent.
Status: current	Access: not-accessible
OBJECT-TYPE
	TlpDeviceEntry

tlpDeviceIndex		1.3.6.1.4.1.850.1.1.1.2.1.1
The table row index for the device.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpDeviceRowStatus		1.3.6.1.4.1.850.1.1.1.2.1.2
Used with table edits to indicate the status of a given row in tlpDeviceTable.
Status: current	Access: read-only
OBJECT-TYPE
	RowStatus

tlpDeviceType		1.3.6.1.4.1.850.1.1.1.2.1.3
The type of device. One of the appropriate hardware types: ups, pdu, envirosense, etc.
Status: current	Access: read-only
OBJECT-TYPE
	OBJECT IDENTIFIER

tlpDeviceManufacturer		1.3.6.1.4.1.850.1.1.1.2.1.4
The name of the manufacturer.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

tlpDeviceModel		1.3.6.1.4.1.850.1.1.1.2.1.5
The model designation.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

tlpDeviceName		1.3.6.1.4.1.850.1.1.1.2.1.6
A user-supplied name for the device.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString

tlpDeviceID		1.3.6.1.4.1.850.1.1.1.2.1.7
A user-supplied ID for the device.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	0..65535

tlpDeviceLocation		1.3.6.1.4.1.850.1.1.1.2.1.8
A user-supplied location for the device.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString

tlpDeviceRegion		1.3.6.1.4.1.850.1.1.1.2.1.9
A user-supplied region for the device.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString

tlpDeviceStatus		1.3.6.1.4.1.850.1.1.1.2.1.10
The currently most critical alarm status for the device.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	none(0), critical(1), warning(2), info(3), status(4), offline(5), custom(6), configuration(7)

tlpDeviceIdentTable		1.3.6.1.4.1.850.1.1.2.1
The identity details of each device in device table. The number of entries is given by the value of tlpDevicesNumDevices.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		TlpDeviceIdentEntry

tlpDeviceIdentEntry		1.3.6.1.4.1.850.1.1.2.1.1
An entry containing details for a particular device.
Status: current	Access: not-accessible
OBJECT-TYPE
	TlpDeviceIdentEntry

tlpDeviceIdentProtocol		1.3.6.1.4.1.850.1.1.2.1.1.1
The Tripplite protocol used to communicate with the device.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

tlpDeviceIdentCommPortType		1.3.6.1.4.1.850.1.1.2.1.1.2
The type of communications port used to connect with the device.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	unknown(0), serial(1), usb(2), hid(3), simulated(4), unittest(5)

tlpDeviceIdentCommPortName		1.3.6.1.4.1.850.1.1.2.1.1.3
The name of the communications port.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

tlpDeviceIdentFirmwareVersion		1.3.6.1.4.1.850.1.1.2.1.1.4
The firmware version of the device.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

tlpDeviceIdentSerialNum		1.3.6.1.4.1.850.1.1.2.1.1.5
The serial number of the device.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

tlpDeviceIdentDateInstalled		1.3.6.1.4.1.850.1.1.2.1.1.6
The installation date for this device in the format of mm/dd/yyyy.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString

tlpDeviceIdentHardwareVersion		1.3.6.1.4.1.850.1.1.2.1.1.7
The hardware revision of the device. This value will return ERROR_NO_SUCH_NAME if not supported by the device.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

tlpDeviceIdentCurrentUptime		1.3.6.1.4.1.850.1.1.2.1.1.8
The device uptime since its last startup. The format of this value is a comma- delimited string representing days, hours and minutes. For example, the value of 123,4,5 represents 123 days, 4 hours and 5 minutes. This value will return ERROR_NO_SUCH_NAME if not supported by the device.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

tlpDeviceIdentTotalUptime		1.3.6.1.4.1.850.1.1.2.1.1.9
The cumulative (total) uptime for the device. The format of this value is a comma- delimited string representing days, hours and minutes. For example, the value of 123,4,5 represents 123 days, 4 hours and 5 minutes. This value will return ERROR_NO_SUCH_NAME if not supported by the device.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

tlpDeviceIdentFirmwareVersion2		1.3.6.1.4.1.850.1.1.2.1.1.10
The firmware version of second IC on the device. This value will return ERROR_NO_SUCH_NAME if not supported by the device.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

tlpDeviceIdentFirmwareVersion3		1.3.6.1.4.1.850.1.1.2.1.1.11
The firmware version of third IC on the device. This value will return ERROR_NO_SUCH_NAME if not supported by the device.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

tlpDeviceIdentNvrID		1.3.6.1.4.1.850.1.1.2.1.1.12
The id of NVRAM. This value will return ERROR_NO_SUCH_NAME if not supported by the device.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

tlpUpsIdentNumUps		1.3.6.1.4.1.850.1.1.3.1.1.1
The number of ups devices that this agent is currently managing.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpUpsIdentTable		1.3.6.1.4.1.850.1.1.3.1.1.2
The identity details of each ups in device table. This is a sparse dependent table, and will contain some subset of devices that are upss.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		TlpUpsIdentEntry

tlpUpsIdentEntry		1.3.6.1.4.1.850.1.1.3.1.1.2.1
An entry containing details for a particular ups.
Status: current	Access: not-accessible
OBJECT-TYPE
	TlpUpsIdentEntry

tlpUpsIdentNumInputs		1.3.6.1.4.1.850.1.1.3.1.1.2.1.1
The number of input lines supported by the ups.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpUpsIdentNumOutputs		1.3.6.1.4.1.850.1.1.3.1.1.2.1.2
The number of output lines supported by the ups.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpUpsIdentNumBypass		1.3.6.1.4.1.850.1.1.3.1.1.2.1.3
The number of bypass lines supported by the ups.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpUpsIdentNumPhases		1.3.6.1.4.1.850.1.1.3.1.1.2.1.4
The number of phases supported by the ups.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpUpsIdentNumOutlets		1.3.6.1.4.1.850.1.1.3.1.1.2.1.5
The number of receptacles supported by the ups.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpUpsIdentNumOutletGroups		1.3.6.1.4.1.850.1.1.3.1.1.2.1.6
The number of receptacle groups supported by the ups.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpUpsIdentNumBatteryPacks		1.3.6.1.4.1.850.1.1.3.1.1.2.1.7
The number of battery packs, internal and external combined, supported by the ups.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpUpsIdentNumFans		1.3.6.1.4.1.850.1.1.3.1.1.2.1.8
The number of fans supported by the ups.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpUpsSupportsTable		1.3.6.1.4.1.850.1.1.3.1.1.3
The supported details of each ups in device table. This is a sparse dependent table, and will contain some subset of devices that are upss.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		TlpUpsSupportsEntry

tlpUpsSupportsEntry		1.3.6.1.4.1.850.1.1.3.1.1.3.1
An entry containing supported details for a particular ups.
Status: current	Access: not-accessible
OBJECT-TYPE
	TlpUpsSupportsEntry

tlpUpsSupportsEnergywise		1.3.6.1.4.1.850.1.1.3.1.1.3.1.1
Indicates whether the ups supports Cisco EnergyWise.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

tlpUpsSupportsRampShed		1.3.6.1.4.1.850.1.1.3.1.1.3.1.2
Indicates whether the ups supports ramping and shedding.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

tlpUpsSupportsOutletGroup		1.3.6.1.4.1.850.1.1.3.1.1.3.1.3
Indicates whether the ups supports outlet groups.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

tlpUpsSupportsOutletCurrentPower		1.3.6.1.4.1.850.1.1.3.1.1.3.1.4
Indicates whether the ups reports individual receptacle current and power measurements. Devices that do not support individual receptacle measurements will always return ERROR_NO_SUCH_NAME for tlpUpsOutletCurrent and tlpUpsOutletPower.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

tlpUpsSupportsOutletVoltage		1.3.6.1.4.1.850.1.1.3.1.1.3.1.5
Indicates whether the ups reports individual receptacle voltage measurements. Devices that do not support individual receptacle measurements will always return ERROR_NO_SUCH_NAME for tlpUpsOutletVoltage.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

tlpUpsDeviceTable		1.3.6.1.4.1.850.1.1.3.1.2.1
The device details of each ups in device table. This is a sparse dependent table, and will contain some subset of devices that are upss.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		TlpUpsDeviceEntry

tlpUpsDeviceEntry		1.3.6.1.4.1.850.1.1.3.1.2.1.1
An entry containing device details for a particular ups.
Status: current	Access: not-accessible
OBJECT-TYPE
	TlpUpsDeviceEntry

tlpUpsDeviceMainLoadState		1.3.6.1.4.1.850.1.1.3.1.2.1.1.1
The current state of the main output of the device.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	unknown(0), off(1), on(2)

tlpUpsDeviceMainLoadControllable		1.3.6.1.4.1.850.1.1.3.1.2.1.1.2
Indicates whether or not the main output is controllable, and whether the ups can be turned off and on.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

tlpUpsDeviceMainLoadCommand		1.3.6.1.4.1.850.1.1.3.1.2.1.1.3
Reading this value will always return 0. Setting this value to turnOff(1) will turn off the main output of the ups. Setting this value to turnOn(2) will turn on the main output of the ups. Setting this value to cycle(3) will turn off the main output, then turn it back on.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	idle(0), turnOff(1), turnOn(2), cycle(3)

tlpUpsDevicePowerOnDelay		1.3.6.1.4.1.850.1.1.3.1.2.1.1.4
The configurable delay value, which sets the amount of additional time a given device will wait before it connects to a valid AC source. By default the delay value is set to 0.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32

tlpUpsDeviceTestDate		1.3.6.1.4.1.850.1.1.3.1.2.1.1.5
The date of the last self-test run on the ups, in the format YYYY-MM-DD.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

tlpUpsDeviceTestResultsStatus		1.3.6.1.4.1.850.1.1.3.1.2.1.1.6
The result of the last self-test run on the ups.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	noTest(0), doneAndPassed(1), doneAndWarning(2), doneAndError(3), aborted(4), inProgress(5), noTestInitiated(6), badBattery(7), overCurrent(8), batteryFailed(9)

tlpUpsDeviceTemperatureC		1.3.6.1.4.1.850.1.1.3.1.2.1.1.7
The ambient temperature at or near the ups casing. Temperature measurements are not supported on all models. If not supported, this value will always return ERROR_NO_SUCH_NAME.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

tlpUpsDeviceTemperatureF		1.3.6.1.4.1.850.1.1.3.1.2.1.1.8
The ambient temperature at or near the ups casing. Temperature measurements are not supported on all models. If not supported, this value will always return ERROR_NO_SUCH_NAME.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

tlpUpsDeviceLastACFailureReason		1.3.6.1.4.1.850.1.1.3.1.2.1.1.9
The last AC failure reason.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	noACFailureSinceReset(0), blackout(1), instantaneousHighLineFrequency(2), highLineVoltage(3), lowLineVoltage(4), averageFrequencyFault(5), instantaneousLowLineFrequency(6), delayedBrownout(7)

tlpUpsDeviceLastShutdownReason		1.3.6.1.4.1.850.1.1.3.1.2.1.1.10
The last unit shut down reason.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	noShutdownSinceReset(0), onOffButtonShutdown(1), averageVbattSmallerThenLVCShutdown(2), fastVbattKeepaliveVoltageFastShutdown(3), averageCurrentLimitShutdown(4), fastCurrentLimitShutdown(5), heavyLoadThermalTimeLimitShutdown(6), fixedInvertModeTimeLimitShutdown(7), highBatteryVoltageFault(8), averageVbattKeepaliveVoltageShutdown(9), shutdownCommandWithAutorestartEnabled(10), shutdownCommandWithoutAutorestartEnabled(11), lineConnectRelayFault(12), epoInvertMode(13), epoRebootMode(14), invalidLineStandbyMode(15), chargerLimitMinBatteryVoltage(16), chargerLimitMaxBatteryVoltage(17), invalidLineDelayedWakeupAutorestartEnabled(18), invalidLineDelayedWakeupAutorestartDisabled(19), minBatteryVoltagePriorDelayedWakeupAutorestartEnabled(20), minBatteryVoltagePriorDelayedWakeupAutorestartDisabled(21), lvcShutdownAutorestartEnabled(22), lvcShutdownAutorestartDisabled(23), overloadShutdownAutorestartEnabled(24), overloadShutdownAutorestartDisabled(25), overTemperatureShutdownAutorestartEnabled(26), overTemperatureShutdownAutorestartDisabled(27), onOffButtonShutdownAutorestartEnabled(28), onOffButtonShutdownAutorestartDisabled(29), batteryReportedFault(30), batteryCommunicationLost(31), batteryJumpStartChargerTimeoutError(32)

tlpUpsDeviceOutputCurrentPrecision		1.3.6.1.4.1.850.1.1.3.1.2.1.1.11
Output current is reported by tlpUpsOutputLineCurrent, tlpUpsOutputLineCurrentMin and tlpUpsOutputLineCurrentMax. These values are all reported in hundredths(0.01A),which accommodates all models; however, on any given device the actual precision may vary. This value describes the actual precision, which can be used as a divisor against the output current values to obtain the true output current measurement. For example, if tlpUpsOutputLineCurrent reports 530 and tlpUpsDeviceOutputCurrentPrecision is tenths(1), then the actual output current is 5.3.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	wholeNumber(0), tenths(1), hundredths(2)

tlpUpsBatterySummaryTable		1.3.6.1.4.1.850.1.1.3.1.3.1.1
The battery system summary of each ups in the device table. This is a sparse dependent table, and will contain the number of entries based upon the number of upss managed by the agent as reported by tlpUpsIdentNumUps.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		TlpUpsBatterySummaryEntry

tlpUpsBatterySummaryEntry		1.3.6.1.4.1.850.1.1.3.1.3.1.1.1
An entry containing information applicable to a particular battery system managed by this agent.
Status: current	Access: not-accessible
OBJECT-TYPE
	TlpUpsBatterySummaryEntry

tlpUpsBatteryStatus		1.3.6.1.4.1.850.1.1.3.1.3.1.1.1.1
The indication of the capacity remaining in the UPS system's batteries. A value of batteryNormal indicates that the remaining run-time is greater than tlpUpsConfigLowBattTime. A value of batteryLow indicates that the remaining battery run-time is less than or equal to tlpUpsConfigLowBattTime. A value of batteryDepleted indicates that the UPS will be unable to sustain the present load when and if the utility power is lost (including the possibility that the utility power is currently absent and the UPS is unable to sustain the output).
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	unknown(1), batteryNormal(2), batteryLow(3), batteryDepleted(4)

tlpUpsSecondsOnBattery		1.3.6.1.4.1.850.1.1.3.1.3.1.1.1.2
If the unit is on battery power, the elapsed time since the UPS last switched to battery power, or the time since the network management subsystem was last restarted, whichever is less. Zero shall be returned if the unit is not on battery power.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpUpsEstimatedMinutesRemaining		1.3.6.1.4.1.850.1.1.3.1.3.1.1.1.3
An estimate of the time to battery charge depletion under the present load conditions if the utility power is off and remains off, or if it were to be lost and remain off.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpUpsEstimatedChargeRemaining		1.3.6.1.4.1.850.1.1.3.1.3.1.1.1.4
An estimate of the battery charge remaining expressed as a percent of full charge.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

tlpUpsBatteryRunTimeRemaining		1.3.6.1.4.1.850.1.1.3.1.3.1.1.1.5
The run time remaining before batteries are exhausted. If the device does not support run time remaining, then the agent reports ERROR_NO_SUCH_NAME.
Status: current	Access: read-only
OBJECT-TYPE
	TimeTicks

tlpUpsBatteryDetailTable		1.3.6.1.4.1.850.1.1.3.1.3.1.2
The battery detail of each ups in the device table. This is a sparse dependent table, and will contain the number of entries based upon the number of upss managed by the agent as reported by tlpUpsIdentNumUps.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		TlpUpsBatteryDetailEntry

tlpUpsBatteryDetailEntry		1.3.6.1.4.1.850.1.1.3.1.3.1.2.1
An entry containing information applicable to a particular battery system managed by this agent.
Status: current	Access: not-accessible
OBJECT-TYPE
	TlpUpsBatteryDetailEntry

tlpUpsBatteryDetailVoltage		1.3.6.1.4.1.850.1.1.3.1.3.1.2.1.1
The magnitude of the present battery voltage.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpUpsBatteryDetailCurrent		1.3.6.1.4.1.850.1.1.3.1.3.1.2.1.2
The present battery current.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

tlpUpsBatteryDetailCapacity		1.3.6.1.4.1.850.1.1.3.1.3.1.2.1.3
The estimated remaining battery capacity expressed as a percent of full capacity.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

tlpUpsBatteryDetailCharge		1.3.6.1.4.1.850.1.1.3.1.3.1.2.1.4
Denotes the charge state of the battery.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	floating(0), charging(1), resting(2), discharging(3), normal(4), standby(5)

tlpUpsBatteryDetailChargerStatus		1.3.6.1.4.1.850.1.1.3.1.3.1.2.1.5
The status of the battery charger. If the device does not support this value, then the agent will report ERROR_NO_SUCH_NAME.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	ok(0), inFaultCondition(1)

tlpUpsBatteryPackIdentTable		1.3.6.1.4.1.850.1.1.3.1.3.1.3
The battery identification details for each ups in the device table. This is a sparse dependent table, and will contain the number of entries based upon the number of upss managed by the agent as reported by upsIdentNumUps and the number of battery battery packs per each as reported by tlpUpsNumBatteryPacks.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		TlpUpsBatteryIdentEntry

tlpUpsBatteryPackIdentEntry		1.3.6.1.4.1.850.1.1.3.1.3.1.3.1
An entry containing information applicable to a particular battery pack managed by this agent.
Status: current	Access: not-accessible
OBJECT-TYPE
	TlpUpsBatteryIdentEntry

tlpUpsBatteryPackIdentIndex		1.3.6.1.4.1.850.1.1.3.1.3.1.3.1.1
The table row index for the ups battery pack.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpUpsBatteryPackIdentManufacturer		1.3.6.1.4.1.850.1.1.3.1.3.1.3.1.2
The manufacturer of the battery pack. If the device does not support this value, then the agent reports ERROR_NO_SUCH_NAME.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

tlpUpsBatteryPackIdentModel		1.3.6.1.4.1.850.1.1.3.1.3.1.3.1.3
The model or device name of the battery pack. If the device does not support this value, then the agent reports ERROR_NO_SUCH_NAME.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

tlpUpsBatteryPackIdentSerialNum		1.3.6.1.4.1.850.1.1.3.1.3.1.3.1.4
The serial number of the battery pack. If the device does not support this value, then the agent reports ERROR_NO_SUCH_NAME.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

tlpUpsBatteryPackIdentFirmware		1.3.6.1.4.1.850.1.1.3.1.3.1.3.1.5
The firmware of the battery pack. If the device does not support this value, then the agent reports ERROR_NO_SUCH_NAME.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

tlpUpsBatteryPackIdentSKU		1.3.6.1.4.1.850.1.1.3.1.3.1.3.1.6
The SKU of the battery pack. If the device does not support this value, then the agent reports ERROR_NO_SUCH_NAME.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

tlpUpsBatteryPackConfigTable		1.3.6.1.4.1.850.1.1.3.1.3.1.4
The battery configuration details for each ups in the device table. This is a sparse dependent table, and will contain the number of entries based upon the number of upss managed by the agent as reported by upsIdentNumUps and the number of battery battery packs per each as reported by tlpUpsNumBatteryPacks.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		TlpUpsBatteryConfigEntry

tlpUpsBatteryPackConfigEntry		1.3.6.1.4.1.850.1.1.3.1.3.1.4.1
An entry containing information applicable to a particular battery pack managed by this agent.
Status: current	Access: not-accessible
OBJECT-TYPE
	TlpUpsBatteryConfigEntry

tlpUpsBatteryPackConfigChemistry		1.3.6.1.4.1.850.1.1.3.1.3.1.4.1.1
The type of battery pack.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	unknown(0), leadAcid(1), nickelCadmium(2), lithiumIon(3)

tlpUpsBatteryPackConfigStyle		1.3.6.1.4.1.850.1.1.3.1.3.1.4.1.2
The style of battery pack.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	unknown(0), nonsmart(1), smart(2), bms(3)

tlpUpsBatteryPackConfigLocation		1.3.6.1.4.1.850.1.1.3.1.3.1.4.1.3
The location of the battery pack.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	unknown(0), internal(1), external(2)

tlpUpsBatteryPackConfigStrings		1.3.6.1.4.1.850.1.1.3.1.3.1.4.1.4
The number of series strings in parallel contained in the battery pack. If the device does not support this value, then the agent will report ERROR_NO_SUCH_NAME.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpUpsBatteryPackConfigBatteriesPerString		1.3.6.1.4.1.850.1.1.3.1.3.1.4.1.5
The number of battery per each string in the battery pack. If the device does not support this value, then the agent will report ERROR_NO_SUCH_NAME.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpUpsBatteryPackConfigCellsPerBattery		1.3.6.1.4.1.850.1.1.3.1.3.1.4.1.6
The number of cells per battery..
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	unknown(0), one(1), two(2), four(4), six(6)

tlpUpsBatteryPackConfigNumBatteries		1.3.6.1.4.1.850.1.1.3.1.3.1.4.1.7
The total number of batteries contained in the battery pack. If the device does not support this value, then the agent will report ERROR_NO_SUCH_NAME.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpUpsBatteryPackConfigCapacityUnits		1.3.6.1.4.1.850.1.1.3.1.3.1.4.1.8
The units of measurement used for tlpUpsBatteryPackConfigDesignCapacity and tlpUpsBatteryPackConfigCellCapacity. If supported, this value will report either mAHR(1), amps per hour, or mWhr(1), watts per hour. If the device does not support this value, then the agent will report ERROR_NO_SUCH_NAME.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	mAHr(0), mWHr(1)

tlpUpsBatteryPackConfigDesignCapacity		1.3.6.1.4.1.850.1.1.3.1.3.1.4.1.9
The theoretical or nominal capacity of the battery pack in the measurement defined by tlpUpsBatteryPackConfigCapacityUnits. If the device does not support this value, then the agent will report ERROR_NO_SUCH_NAME.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpUpsBatteryPackConfigCellCapacity		1.3.6.1.4.1.850.1.1.3.1.3.1.4.1.10
The capacity of the batteries in the measurement defined by tlpUpsBatteryPackConfigCapacityUnits. If the device does not support this value, then the agent will report ERROR_NO_SUCH_NAME.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpUpsBatteryPackConfigMinCellVoltage		1.3.6.1.4.1.850.1.1.3.1.3.1.4.1.11
The minimum cell voltage for the batteries. If the device does not support this value, then the agent will report ERROR_NO_SUCH_NAME.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpUpsBatteryPackConfigMaxCellVoltage		1.3.6.1.4.1.850.1.1.3.1.3.1.4.1.12
The maximum cell voltage for the batteries. If the device does not support this value, then the agent will report ERROR_NO_SUCH_NAME.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpUpsBatteryPackDetailTable		1.3.6.1.4.1.850.1.1.3.1.3.1.5
The details of each battery pack for each ups in the device table. This is a sparse dependent table, and will contain the number of entries based upon the number of upss and battery packs managed by the agent as reported by tlpUpsIdentNumUps and tlpUpsIdentNumBatteryPacks.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		TlpUpsBatteryPackDetailEntry

tlpUpsBatteryPackDetailEntry		1.3.6.1.4.1.850.1.1.3.1.3.1.5.1
An entry containing information applicable to a particular battery system managed by this agent.
Status: current	Access: not-accessible
OBJECT-TYPE
	TlpUpsBatteryPackDetailEntry

tlpUpsBatteryPackDetailCondition		1.3.6.1.4.1.850.1.1.3.1.3.1.5.1.1
The condition of the battery. A bad battery should be replaced.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	unknown(0), good(1), weak(2), bad(3)

tlpUpsBatteryPackDetailTemperatureC		1.3.6.1.4.1.850.1.1.3.1.3.1.5.1.2
The ambient temperature at or near the UPS Battery casing.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpUpsBatteryPackDetailTemperatureF		1.3.6.1.4.1.850.1.1.3.1.3.1.5.1.3
The ambient temperature at or near the UPS Battery casing.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpUpsBatteryPackDetailAge		1.3.6.1.4.1.850.1.1.3.1.3.1.5.1.4
The age of the battery in years. This is equal to the current date minus tlpUpsBatteryPackIdentInstallDate.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpUpsBatteryPackDetailLastReplaceDate		1.3.6.1.4.1.850.1.1.3.1.3.1.5.1.5
The date when the batteries were last replaced in YYYYMMDD format.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString

tlpUpsBatteryPackDetailNextReplaceDate		1.3.6.1.4.1.850.1.1.3.1.3.1.5.1.6
The date when the batteries should next be replaced in YYYYMMDD format.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

tlpUpsBatteryPackDetailCycleCount		1.3.6.1.4.1.850.1.1.3.1.3.1.5.1.7
The number of times the battery went into invert mode. This number is incremented by 1 each time the unit goes on battery mode (with the exception of Self Test mode). If the device does not support this value, then the agent will report ERROR_NO_SUCH_NAME.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpUpsInputTable		1.3.6.1.4.1.850.1.1.3.1.3.2.1
The input details of each ups in the device table. This is a sparse dependent table, and will contain the number of entries based upon the number of upss managed by the agent as reported by tlpUpsIdentNumUps.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		TlpUpsInputEntry

tlpUpsInputEntry		1.3.6.1.4.1.850.1.1.3.1.3.2.1.1
An entry containing information applicable to all input lines per each ups managed by this agent.
Status: current	Access: not-accessible
OBJECT-TYPE
	TlpUpsInputEntry

tlpUpsInputLineBads		1.3.6.1.4.1.850.1.1.3.1.3.2.1.1.1
A count of the number of times the input entered an out-of-tolerance condition as defined by the manufacturer. This count is incremented by one each time the input transitions from zero out-of-tolerance lines to one or more input lines out-of-tolerance. This value is not supported on all units. If the ups does not support this value, then the agent reports ERROR_NO_SUCH_NAME.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

tlpUpsInputNominalVoltage		1.3.6.1.4.1.850.1.1.3.1.3.2.1.1.2
The nominal value of the input line voltage. This value may not be supported on all models. If not supported, this value will return ERROR_NO_SUCH_NAME.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpUpsInputNominalFrequency		1.3.6.1.4.1.850.1.1.3.1.3.2.1.1.3
The nominal value of the input line frequency. This value may not be supported on all models. If not supported, this value will return ERROR_NO_SUCH_NAME.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpUpsInputLowTransferVoltage		1.3.6.1.4.1.850.1.1.3.1.3.2.1.1.4
The minimum line voltage allowed before the ups system transfers to battery backup.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpUpsInputLowTransferVoltageLowerBound		1.3.6.1.4.1.850.1.1.3.1.3.2.1.1.5
The lower boundary value of tlpUpsInputLowTransferVoltage as dictated by the hardware of the unit.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpUpsInputLowTransferVoltageUpperBound		1.3.6.1.4.1.850.1.1.3.1.3.2.1.1.6
The upper boundary value of tlpUpsInputLowTransferVoltage as dictated by the hardware of the unit.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpUpsInputHighTransferVoltage		1.3.6.1.4.1.850.1.1.3.1.3.2.1.1.7
The maximum line voltage allowed before the ups system transfers to battery backup.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpUpsInputHighTransferVoltageLowerBound		1.3.6.1.4.1.850.1.1.3.1.3.2.1.1.8
The lower boundary value of tlpUpsInputHighTransferVoltage as dictated by the hardware of the unit.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpUpsInputHighTransferVoltageUpperBound		1.3.6.1.4.1.850.1.1.3.1.3.2.1.1.9
The upper boundary value of tlpUpsInputHighTransferVoltage as dictated by the hardware of the unit.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpUpsInputWattHours		1.3.6.1.4.1.850.1.1.3.1.3.2.1.1.10
The number of watt hours of energy utilized in the past 24 hours. Use tlpUpsControlResetWattHours to reset the watt hours calculation algorithm.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpUpsInputPhaseTable		1.3.6.1.4.1.850.1.1.3.1.3.2.2
The input phase details of each ups in the device table. This is a sparse dependent table, and will contain the number of entries based upon the number of upss managed by the agent as reported by tlpUpsIdentNumUps and tlpUpsIdentNumPhases.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		TlpUpsInputPhaseEntry

tlpUpsInputPhaseEntry		1.3.6.1.4.1.850.1.1.3.1.3.2.2.1
An entry containing information applicable to a particular input phase managed by this agent.
Status: current	Access: not-accessible
OBJECT-TYPE
	TlpUpsInputPhaseEntry

tlpUpsInputPhaseIndex		1.3.6.1.4.1.850.1.1.3.1.3.2.2.1.1
The table row index for the ups input phase.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpUpsInputPhaseFrequency		1.3.6.1.4.1.850.1.1.3.1.3.2.2.1.2
The present input frequency for a given input line.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpUpsInputPhaseVoltage		1.3.6.1.4.1.850.1.1.3.1.3.2.2.1.3
The magnitude of the present input voltage for a given input line.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpUpsInputPhaseVoltageMin		1.3.6.1.4.1.850.1.1.3.1.3.2.2.1.4
The minimum input voltage value since the last reset of this value for a given input line. If any value is written to either tlpUpsInputVoltageMin or tlpUpsInputVoltageMax, both will be reset to their appropriate minimum and maximum values.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

tlpUpsInputPhaseVoltageMax		1.3.6.1.4.1.850.1.1.3.1.3.2.2.1.5
The maximum input voltage value since the last reset of this value for a given input line. If any value is written to either tlpUpsInputVoltageMin or tlpUpsInputVoltageMax, both will be reset to their appropriate minimum and maximum values.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

tlpUpsInputPhaseCurrent		1.3.6.1.4.1.850.1.1.3.1.3.2.2.1.6
The magnitude of the present input current.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpUpsInputPhasePower		1.3.6.1.4.1.850.1.1.3.1.3.2.2.1.7
The magnitude of the present input true power.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpUpsOutputTable		1.3.6.1.4.1.850.1.1.3.1.3.3.1
The output details of each ups in the device table. This is a sparse dependent table, and will contain the number of entries based upon the number of upss managed by the agent as reported by tlpUpsIdentNumUps.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		TlpUpsOutputEntry

tlpUpsOutputEntry		1.3.6.1.4.1.850.1.1.3.1.3.3.1.1
An entry containing information applicable to a particular output line managed by this agent.
Status: current	Access: not-accessible
OBJECT-TYPE
	TlpUpsOutputEntry

tlpUpsOutputSource		1.3.6.1.4.1.850.1.1.3.1.3.3.1.1.1
The present source of output power. The enumeration none(2) indicates that there is no source of output power (and therefore no output power), for example, the system has opened the output breaker.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	unknown(0), other(1), none(2), normal(3), bypass(4), battery(5), boosting(6), reducing(7), second(8), economy(9)

tlpUpsOutputNominalVoltage		1.3.6.1.4.1.850.1.1.3.1.3.3.1.1.2
The nominal value of the output voltage. This value may not be supported on all models. If not supported, the agent reports ERROR_NO_SUCH_NAME.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpUpsOutputFrequency		1.3.6.1.4.1.850.1.1.3.1.3.3.1.1.3
The present output frequency. The output frequency on most ups devices is common across all output lines. Some ups devices, however, maintain the output frequency per each line. If a common frequency is supported by the ups, then this frequency will contain the common frequency value. If not supported, the agent reports ERROR_NO_SUCH_NAME.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpUpsOutputVARating		1.3.6.1.4.1.850.1.1.3.1.3.3.1.1.4
The VA Rating of the ups. This value may not be supported on all models. If not supported, the agent reports ERROR_NO_SUCH_NAME.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpUpsOutputLineTable		1.3.6.1.4.1.850.1.1.3.1.3.3.2
The output line details of each ups in the device table. This is a sparse dependent table, and will contain the number of entries based upon the number of upss managed by the agent as reported by tlpUpsIdentNumUps.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		TlpUpsOutputLineEntry

tlpUpsOutputLineEntry		1.3.6.1.4.1.850.1.1.3.1.3.3.2.1
An entry containing information applicable to a particular output line managed by this agent.
Status: current	Access: not-accessible
OBJECT-TYPE
	TlpUpsOutputLineEntry

tlpUpsOutputLineIndex		1.3.6.1.4.1.850.1.1.3.1.3.3.2.1.1
The table row index for the ups output line.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpUpsOutputLineVoltage		1.3.6.1.4.1.850.1.1.3.1.3.3.2.1.2
The magnitude of the present output voltage for a given output line.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpUpsOutputLineCurrent		1.3.6.1.4.1.850.1.1.3.1.3.3.2.1.3
The output current, in hundredths of amps, for a given line. The actual precision of this value, whether a whole number, tenths or hundredths, is returned by tlpUpsDeviceOutputCurrentPrecision.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpUpsOutputLinePower		1.3.6.1.4.1.850.1.1.3.1.3.3.2.1.4
The present output true power.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpUpsOutputLinePercentLoad		1.3.6.1.4.1.850.1.1.3.1.3.3.2.1.5
The percentage of the UPS power capacity presently being used on this output line, i.e., the greater of the percent load of true power capacity and the percent load of VA.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0..200

tlpUpsOutputLineFrequency		1.3.6.1.4.1.850.1.1.3.1.3.3.2.1.6
The present output frequency on this output line. The output frequency on most ups devices is common across all output lines. Some ups devices, however, maintain the output frequency per each line. If a per line frequency is supported by the ups, then this frequency value will reports the value of this line. If not supported, the agent reports ERROR_NO_SUCH_NAME.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpUpsBypassTable		1.3.6.1.4.1.850.1.1.3.1.3.4.1
The bypass details of each ups in the device table. This is a sparse dependent table, and will contain the number of entries based upon the number of upss managed by the agent as reported by tlpUpsIdentNumUps.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		TlpUpsBypassEntry

tlpUpsBypassEntry		1.3.6.1.4.1.850.1.1.3.1.3.4.1.1
An entry containing information applicable to all input lines per each ups managed by this agent.
Status: current	Access: not-accessible
OBJECT-TYPE
	TlpUpsBypassEntry

tlpUpsBypassFrequency		1.3.6.1.4.1.850.1.1.3.1.3.4.1.1.1
The present bypass frequency.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpUpsBypassLineTable		1.3.6.1.4.1.850.1.1.3.1.3.4.2
The bypass line details of each ups in the device table. This is a sparse dependent table, and will contain the number of entries based upon the number of upss managed by the agent as reported by tlpUpsIdentNumUps.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		TlpUpsBypassLineEntry

tlpUpsBypassLineEntry		1.3.6.1.4.1.850.1.1.3.1.3.4.2.1
An entry containing information applicable to a particular bypass line managed by this agent.
Status: current	Access: not-accessible
OBJECT-TYPE
	TlpUpsBypassLineEntry

tlpUpsBypassLineIndex		1.3.6.1.4.1.850.1.1.3.1.3.4.2.1.1
The bypass line identifier.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpUpsBypassLineVoltage		1.3.6.1.4.1.850.1.1.3.1.3.4.2.1.2
The present bypass voltage.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpUpsBypassLineCurrent		1.3.6.1.4.1.850.1.1.3.1.3.4.2.1.3
The present bypass current.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpUpsBypassLinePower		1.3.6.1.4.1.850.1.1.3.1.3.4.2.1.4
The present true power conveyed by the bypass.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpUpsOutletTable		1.3.6.1.4.1.850.1.1.3.1.3.5.1
The details of each ups outlet in the device table. This is a sparse dependent table, and will contain the number of entries based upon the number of upss managed by the agent as reported by tlpUpsIdentNumUps.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		TlpUpsOutletEntry

tlpUpsOutletEntry		1.3.6.1.4.1.850.1.1.3.1.3.5.1.1
An entry containing information applicable to a particular outlet managed by this agent.
Status: current	Access: not-accessible
OBJECT-TYPE
	TlpUpsOutletEntry

tlpUpsOutletIndex		1.3.6.1.4.1.850.1.1.3.1.3.5.1.1.1
The table row index for the ups outlet.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpUpsOutletName		1.3.6.1.4.1.850.1.1.3.1.3.5.1.1.2
A user-definable string identifying the name of the outlet.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString

tlpUpsOutletDescription		1.3.6.1.4.1.850.1.1.3.1.3.5.1.1.3
A user-definable string identifying the device(s) connected to the given outlet.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString

tlpUpsOutletState		1.3.6.1.4.1.850.1.1.3.1.3.5.1.1.4
The current state of the outlet.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	unknown(0), off(1), on(2)

tlpUpsOutletControllable		1.3.6.1.4.1.850.1.1.3.1.3.5.1.1.5
Denotes whether this outlet is controllable.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

tlpUpsOutletCommand		1.3.6.1.4.1.850.1.1.3.1.3.5.1.1.6
Reading this value will always return 0. Setting this value to turnOff(1) will turn off the outlet. Setting this value to turnOn(2) will turn on the outlet. Setting this value to cycle(3) will turn the outlet off, then turn it back on.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	idle(0), turnOff(1), turnOn(2), cycle(3)

tlpUpsOutletVoltage		1.3.6.1.4.1.850.1.1.3.1.3.5.1.1.7
The magnitude of the present output voltage for a given outlet. If the voltage measurement is not supported for an individual receptacle regardless whether device-wide or just for this receptacle, then this value will always return ERROR_NO_SUCH_NAME. Device-wide support for receptacle voltage measurements is denoted by tlpUpsSupportsOutletVoltage.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpUpsOutletCurrent		1.3.6.1.4.1.850.1.1.3.1.3.5.1.1.8
The present output current, in hundredths of amps, of a given outlet. If the current measurement is not supported for an individual receptacle regardless whether device-wide or just for this receptacle, then this value will always return ERROR_NO_SUCH_NAME. Device-wide support for receptacle current measurements is denoted by tlpUpsSupportsCurrentPower.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpUpsOutletPower		1.3.6.1.4.1.850.1.1.3.1.3.5.1.1.9
The output power of a given outlet. If the power measurement is not supported for an individual receptacle regardless whether device-wide or just for this receptacle, then this value will always return ERROR_NO_SUCH_NAME. Device-wide support for receptacle power measurements is denoted by tlpUpsSupportsCurrentPower.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpUpsOutletRampAction		1.3.6.1.4.1.850.1.1.3.1.3.5.1.1.10
The ramp action to take on a given outlet when powering on the device. If this receptacle is not controllable, as denoted by tlpUpsOutletControllable, then this value will always return ERROR_NO_SUCH_NAME.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	remainOff(0), turnOnAfterDelay(1)

tlpUpsOutletRampDelay		1.3.6.1.4.1.850.1.1.3.1.3.5.1.1.11
The number of seconds to delay before powering on the given outlet. If this receptacle is not controllable, as denoted by tlpUpsOutletControllable, then this value will always return ERROR_NO_SUCH_NAME.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32

tlpUpsOutletShedAction		1.3.6.1.4.1.850.1.1.3.1.3.5.1.1.12
The shed action to take on a given outlet when powering off the device. If this receptacle is not controllable, as denoted by tlpUpsOutletControllable, then this value will always return ERROR_NO_SUCH_NAME.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	remainOn(0), turnOffAfterDelay(1)

tlpUpsOutletShedDelay		1.3.6.1.4.1.850.1.1.3.1.3.5.1.1.13
The number of seconds to delay before powering off the given outlet. If this receptacle is not controllable, as denoted by tlpUpsOutletControllable, then this value will always return ERROR_NO_SUCH_NAME.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32

tlpUpsOutletGroup		1.3.6.1.4.1.850.1.1.3.1.3.5.1.1.14
The tlpUpsOutletGroupIndex group index of the respective group to which the given outlet is assigned, or zero (0) if the given outlet is not grouped.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32

tlpUpsOutletGroupTable		1.3.6.1.4.1.850.1.1.3.1.3.5.2
The receptacle grouping details of each ups in device table. This is a sparse dependent table, and will contain the number of entries based upon the value of tlpUpsIdentNumOutletGroups per each device.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		TlpUpsOutletGroupEntry

tlpUpsOutletGroupEntry		1.3.6.1.4.1.850.1.1.3.1.3.5.2.1
An entry containing information applicable to a particular outlet group managed by this agent.
Status: current	Access: not-accessible
OBJECT-TYPE
	TlpUpsOutletGroupEntry

tlpUpsOutletGroupIndex		1.3.6.1.4.1.850.1.1.3.1.3.5.2.1.1
The table row index for the ups outlet group.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpUpsOutletGroupRowStatus		1.3.6.1.4.1.850.1.1.3.1.3.5.2.1.2
Row status for the tlpUpsOutletGroupTable
Status: current	Access: read-write
OBJECT-TYPE
	RowStatus

tlpUpsOutletGroupName		1.3.6.1.4.1.850.1.1.3.1.3.5.2.1.3
The name of this outlet group.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString

tlpUpsOutletGroupDescription		1.3.6.1.4.1.850.1.1.3.1.3.5.2.1.4
A description for this outlet group.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString

tlpUpsOutletGroupState		1.3.6.1.4.1.850.1.1.3.1.3.5.2.1.5
The current state of the outlet group. This value will report off(1) if all outlets in the group are off, on(2) if all outlets in the group are on, mixed(3) if some outlets in the group are off and others are on, or unknown(0) if the state of the outlets cannot be determined.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	unknown(0), off(1), on(2), mixed(3)

tlpUpsOutletGroupCommand		1.3.6.1.4.1.850.1.1.3.1.3.5.2.1.6
Reading this value will always return 0. Setting this value to turnOff(1) will turn off every outlet associated with the group. Setting this value to turnOn(2) will turn on every outlet associated with the group. Setting this value to cycle(3) will turn off every outlet associated with the group, then turn each outlet back on.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	idle(0), turnOff(1), turnOn(2), cycle(3)

tlpUpsWatchdogTable		1.3.6.1.4.1.850.1.1.3.1.3.6.1
The watchdog details of each ups in device table. This is a sparse dependent table, and will contain some subset of devices that are upss.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		TlpUpsWatchdogEntry

tlpUpsWatchdogEntry		1.3.6.1.4.1.850.1.1.3.1.3.6.1.1
An entry containing watchdog details for a particular ups.
Status: current	Access: not-accessible
OBJECT-TYPE
	TlpUpsWatchdogEntry

tlpUpsWatchdogSupported		1.3.6.1.4.1.850.1.1.3.1.3.6.1.1.1
Indicates whether or not this ups supports a watchdog reboot.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

tlpUpsWatchdogSecsBeforeReboot		1.3.6.1.4.1.850.1.1.3.1.3.6.1.1.2
The maximum number of seconds that can expire between polls that the engine makes to the ups for data. If this time runs out, then the ups will cycle its outputs. Set this to zero to turns disable this feature.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

tlpUpsFanTable		1.3.6.1.4.1.850.1.1.3.1.3.7.1
The fan speed of each ups in the device table. This is a sparse dependent table, and will contain the number of entries based upon the number of upss managed by the agent as reported by tlpUpsIdentNumFans.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		TlpUpsFanEntry

tlpUpsFanEntry		1.3.6.1.4.1.850.1.1.3.1.3.7.1.1
An entry containing information applicable to a particular fan managed by this agent.
Status: current	Access: not-accessible
OBJECT-TYPE
	TlpUpsFanEntry

tlpUpsFanIndex		1.3.6.1.4.1.850.1.1.3.1.3.7.1.1.1
The table row index for the ups fan speed.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpUpsFanSpeed		1.3.6.1.4.1.850.1.1.3.1.3.7.1.1.2
The fan speed in rotations per minute.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpUpsControlTable		1.3.6.1.4.1.850.1.1.3.1.4.1
The actionable controls for each ups in device table. This is a sparse dependent table, and will contain some subset of devices that are upss.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		TlpUpsControlEntry

tlpUpsControlEntry		1.3.6.1.4.1.850.1.1.3.1.4.1.1
An entry containing controls for a particular ups.
Status: current	Access: not-accessible
OBJECT-TYPE
	TlpUpsControlEntry

tlpUpsControlSelfTest		1.3.6.1.4.1.850.1.1.3.1.4.1.1.1
Set to TRUE to initiate a self test on the ups.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

tlpUpsControlRamp		1.3.6.1.4.1.850.1.1.3.1.4.1.1.2
Set to TRUE to initiate the pre-designated ramp sequence on the ups.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

tlpUpsControlShed		1.3.6.1.4.1.850.1.1.3.1.4.1.1.3
Set to TRUE to initiate the pre-designated shed sequence on the ups.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

tlpUpsControlUpsOn		1.3.6.1.4.1.850.1.1.3.1.4.1.1.4
Set to TRUE to turn the ups on.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

tlpUpsControlUpsOff		1.3.6.1.4.1.850.1.1.3.1.4.1.1.5
Set to TRUE to turn the ups off.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

tlpUpsControlUpsReboot		1.3.6.1.4.1.850.1.1.3.1.4.1.1.6
Set to TRUE to reboot the ups.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

tlpUpsControlBypass		1.3.6.1.4.1.850.1.1.3.1.4.1.1.7
This switches the ups in and out of bypass mode. This value returns the current bypass mode: disable(0) if the ups is not in bypass mode, enable(1) if the ups is in bypass mode. Set to disable(0) to exit bypass mode, or enable(1) to enter bypass mode. If switching bypass mode is not supported, this value will return ERROR_NO_SUCH_NAME.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	disable(0), enable(1)

tlpUpsControlResetWattHours		1.3.6.1.4.1.850.1.1.3.1.4.1.1.8
Set to TRUE to reset the tlpUpsInputWattHours calculation algorithm.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

tlpUpsConfigTable		1.3.6.1.4.1.850.1.1.3.1.5.1
The configuration details of each ups in the device table. This is a sparse dependent table, and will contain the number of entries based upon the number of upss managed by the agent as reported by tlpUpsIdentNumUps.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		TlpUpsConfigEntry

tlpUpsConfigEntry		1.3.6.1.4.1.850.1.1.3.1.5.1.1
An entry containing information applicable to all input lines per each ups managed by this agent.
Status: current	Access: not-accessible
OBJECT-TYPE
	TlpUpsConfigEntry

tlpUpsConfigInputVoltage		1.3.6.1.4.1.850.1.1.3.1.5.1.1.1
The nominal value of the input line voltage. This value may not be supported on all models. If not supported, this value will return ERROR_NO_SUCH_NAME. This value may not be writable on all models. If not writable, the value will be rejected and an appropriate error message will be returned.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

tlpUpsConfigInputFrequency		1.3.6.1.4.1.850.1.1.3.1.5.1.1.2
The nominal input frequency. On those systems which support read-write access to this object, if there is an attempt to set this variable to a value that is not supported, the request must be rejected and the agent shall respond with an appropriate error message, i.e., badValue for SNMPv1, or inconsistentValue for SNMPv2.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

tlpUpsConfigOutputVoltage		1.3.6.1.4.1.850.1.1.3.1.5.1.1.3
The nominal value of the output voltage. This value may not be supported on all models. If not supported, the agent reports ERROR_NO_SUCH_NAME. This value may not be writable on all models. If not writable, the value will be rejected and an appropriate error message will be returned.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

tlpUpsConfigOutputFrequency		1.3.6.1.4.1.850.1.1.3.1.5.1.1.4
The nominal output frequency. On those systems which support read-write access to this object, if there is an attempt to set this variable to a value that is not supported, the request will be rejected and the agent will respond with an appropriate error message.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

tlpUpsConfigAudibleStatus		1.3.6.1.4.1.850.1.1.3.1.5.1.1.5
The requested state of the audible alarm. When in the disabled state, the audible alarm should never sound. The enabled state is self- describing. Setting this object to muted(3) when the audible alarm is sounding shall temporarily silence the alarm. It will remain muted until it would normally stop sounding and the value returned for read operations during this period shall equal muted(3). At the end of this period, the value shall revert to enabled(2). Writes of the value muted(3) when the audible alarm is not sounding shall be accepted but otherwise shall have no effect.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	disabled(1), enabled(2), muted(3)

tlpUpsConfigAutoBatteryTest		1.3.6.1.4.1.850.1.1.3.1.5.1.1.6
When disabled(0), the ups will not perform an automatic battery selftest. When set to another value, the ups will perform an automatic selftest in the approximate period defined by each respective enumerated value. This feature is generally not recommended.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	disabled(0), biweekly(1), monthly(2), quarterly(3), semiannually(4)

tlpUpsConfigAutoRestartAfterShutdown		1.3.6.1.4.1.850.1.1.3.1.5.1.1.7
When enabled(1), the ups should autorestart after a shutdown from battery mode if valid AC is applied. When disabled(0), the ups should not autorestart when AC is restored and instead power up into standby mode.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	disabled(0), enabled(1)

tlpUpsConfigAutoRampOnTransition		1.3.6.1.4.1.850.1.1.3.1.5.1.1.8
When enabled(1), the ups should perform its preconfigured ramp sequence when valid AC is restored while in battery mode. If this value is not supported by the ups, then this value will always return ERROR_NO_SUCH_NAME.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	disabled(0), enabled(1)

tlpUpsConfigAutoShedOnTransition		1.3.6.1.4.1.850.1.1.3.1.5.1.1.9
When enabled(1), the ups should perform its preconfigured shed sequence when valid AC is lost causing the ups to enter battery mode. If this value is not supported by the ups, then this value will always return ERROR_NO_SUCH_NAME.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	disabled(0), enabled(1)

tlpUpsConfigBypassLowerLimitPercent		1.3.6.1.4.1.850.1.1.3.1.5.1.1.10
The lowest AC input voltage allowed to be output to the load while in bypass mode. This setting is expressed as a percentage from nominal voltage. If this value is not supported by the ups, then this value will always return ERROR_NO_SUCH_NAME.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	-20..-5

tlpUpsConfigBypassUpperLimitPercent		1.3.6.1.4.1.850.1.1.3.1.5.1.1.11
The highest AC input voltage allowed to be output to the load while in bypass mode. This setting is expressed as a percentage from nominal voltage. If this value is not supported by the ups, then this value will always return ERROR_NO_SUCH_NAME.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	5..20

tlpUpsConfigBypassLowerLimitVoltage		1.3.6.1.4.1.850.1.1.3.1.5.1.1.12
The lowest AC input voltage allowed to be output to the load while in bypass mode. If this value is not supported by the ups, then this value will always return ERROR_NO_SUCH_NAME.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

tlpUpsConfigBypassUpperLimitVoltage		1.3.6.1.4.1.850.1.1.3.1.5.1.1.13
The highest AC input voltage allowed to be output to the load while in bypass mode. If this value is not supported by the ups, then this value will always return ERROR_NO_SUCH_NAME.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

tlpUpsConfigColdStart		1.3.6.1.4.1.850.1.1.3.1.5.1.1.14
This option enables or disables the ability to turn the ups on without AC supplied. If this value is not supported by the ups, then this value will always return ERROR_NO_SUCH_NAME.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	disabled(0), enabled(1)

tlpUpsConfigEconomicMode		1.3.6.1.4.1.850.1.1.3.1.5.1.1.15
The configurable economic mode options for the ups. The online(0) mode is the default configuration of most upss, which is synonymous as having the economic mode disabled. The economy(1) mode is the typical configuration to run in economy mode, which is synonymous as having the economic mode enabled. Constant50Hz(2) is a power strategy, which fixes the output frequency at 50Hz. Constant60Hz(3) is a power strategy, which fixes the output frequency at 60Hz. ConstantAuto(4) regulates the output frequency at nominal input frequency. AutoAdaptive(5) mode will cause the ups to automatically switch between online(0), maximum quality, and economy(1), maximum efficiency, to improve efficiency during stable utility periods and improve output regulation during unstable utility periods. Not all values are supported by all upss. Most upss, if supportive of economic mode, only supports online(0) and economy(1). If the ups does not support economic mode, then this value will always return ERROR_NO_SUCH_NAME.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	online(0), economy(1), constant50Hz(2), constant60Hz(3), constantAuto(4), autoAdaptive(5)

tlpUpsConfigFaultAction		1.3.6.1.4.1.850.1.1.3.1.5.1.1.16
Determines the action to take if the output needs to be shut down due to a fault condition, limited by the type of fault incurred. When configured for bypass(0), the ups will go to bypass on a fault condition. When configured for standby(1), the ups will go to standby mode on a fault condition. Either configuration will be valid as long as AC input is within normal line voltage and frequency limits when the fault condition occurs. If the line is outside these limits, the ups will turn off. If this value is not supported by the ups, then this value will always return ERROR_NO_SUCH_NAME.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	bypass(0), standby(1)

tlpUpsConfigOffMode		1.3.6.1.4.1.850.1.1.3.1.5.1.1.17
This option governs what mode the ups should go into when AC input is available, but the load is either off or not battery backed up. If this setting is configured for bypass(1), the intention is that any time the ups would normally go into standby mode, it would instead go into bypass mode. Note that this setting does not dictate the mode for fault conditions, which is governed by tlpUpsConfigFaultAction. If this value is not supported by the ups, then this value will always return ERROR_NO_SUCH_NAME.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	standby(0), bypass(1)

tlpUpsConfigLineSensitivity		1.3.6.1.4.1.850.1.1.3.1.5.1.1.18
Adjusts the AC line voltage sensitivity setting. If this value is not supported by the ups, then this value will always return ERROR_NO_SUCH_NAME.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	normal(0), reduced(1), fullyReduced(2)

tlpUpsConfigAutoRestartTable		1.3.6.1.4.1.850.1.1.3.1.5.2
The configurable automatic restart options of each ups in device table. This is a sparse dependent table, and will contain some subset of devices that are upss. Not all options are available on all upss.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		TlpUpsConfigAutoRestartEntry

tlpUpsConfigAutoRestartEntry		1.3.6.1.4.1.850.1.1.3.1.5.2.1
An entry containing configurable automatic restart options for a particular ups.
Status: current	Access: not-accessible
OBJECT-TYPE
	TlpUpsConfigAutoRestartEntry

tlpUpsConfigAutoRestartInverterShutdown		1.3.6.1.4.1.850.1.1.3.1.5.2.1.1
If enabled(1) and the ups is turned off from invert mode (via user interaction), if line becomes valid, the ups will automatically go to line mode. If disabled(0), the ups will turn back on and go to standby mode instead.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	disabled(0), enabled(1)

tlpUpsConfigAutoRestartDelayedWakeup		1.3.6.1.4.1.850.1.1.3.1.5.2.1.2
If enabled(1) and power fails during a DelayBeforeStartup and line remains invalid after the timeout expires, the ups will be set to turn back on automatically. If disabled(0), the ups will turn back on and go to standby mode instead.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	disabled(0), enabled(1)

tlpUpsConfigAutoRestartLowVoltageCutoff		1.3.6.1.4.1.850.1.1.3.1.5.2.1.3
If enabled(1) and the ups is turned off from invert mode (via low voltage cutoff), if line becomes valid, the ups will automatically go to line mode. If disabled(0), the ups will turn back on and go to standby mode instead.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	disabled(0), enabled(1)

tlpUpsConfigAutoRestartOverLoad		1.3.6.1.4.1.850.1.1.3.1.5.2.1.4
If enabled(1) and the ups is turned off from invert mode (via overload), if line becomes valid, the ups will automatically go to line mode. If disabled(0), the ups will turn back on and go to standby mode instead.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	disabled(0), enabled(1)

tlpUpsConfigAutoRestartOverTemperature		1.3.6.1.4.1.850.1.1.3.1.5.2.1.5
If enabled(1) and the ups is turned off from invert mode (via over temperature), if line becomes valid, the ups will automatically go to line mode. If disabled(0), the ups will turn back on and go to standby mode instead.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	disabled(0), enabled(1)

tlpUpsConfigThresholdTable		1.3.6.1.4.1.850.1.1.3.1.5.3
The configurable threshold options of each ups in device table. This is a sparse dependent table, and will contain some subset of devices that are upss. Not all options are available on all upss.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		TlpUpsConfigThresholdEntry

tlpUpsConfigThresholdEntry		1.3.6.1.4.1.850.1.1.3.1.5.3.1
An entry containing configurable threshold options for a particular ups.
Status: current	Access: not-accessible
OBJECT-TYPE
	TlpUpsConfigThresholdEntry

tlpUpsConfigBatteryAgeThreshold		1.3.6.1.4.1.850.1.1.3.1.5.3.1.1
The number of months for a battery to be in service. The battery age alarm, tlpUpsAlarmBatteryAgeAboveThreshold, is triggered when the current date exceeds tlpUpsBatteryPackIdentInstallDate by tlpUpsConfigBatteryAgeThreshold months.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

tlpUpsConfigLowBatteryThreshold		1.3.6.1.4.1.850.1.1.3.1.5.3.1.2
This value denotes the percentage of battery capacity remaining warning level. The low battery alarm, tlpUpsAlarmLowBattery, is triggered when tlpUpsEstimatedChargeRemaining drops below this value.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	5..95

tlpUpsConfigLowBatteryTime		1.3.6.1.4.1.850.1.1.3.1.5.3.1.3
The value in seconds of tlpUpsEstimatedMinutesRemaining at which a lowBattery condition is declared. For agents which support only discrete (discontinuous) values, then the agent shall round up to the next supported value. If the requested value is larger than the largest supported value, then the largest supported value shall be selected.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

tlpUpsConfigOverLoadThreshold		1.3.6.1.4.1.850.1.1.3.1.5.3.1.4
This value denotes the percentage of load at which the overload condition occurs. The overload alarm, tlpUpsAlarmOutputOverload, is triggered when the percentage of output load exceeds this value.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	5..105

tlpPduIdentNumPdu		1.3.6.1.4.1.850.1.1.3.2.1.1
The number of pdu devices that this agent is currently managing.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpPduIdentTable		1.3.6.1.4.1.850.1.1.3.2.1.2
The identity details of each pdu in device table. This is a sparse dependent table, and will contain some subset of devices that are pdus.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		TlpPduIdentEntry

tlpPduIdentEntry		1.3.6.1.4.1.850.1.1.3.2.1.2.1
An entry containing details for a particular pdu.
Status: current	Access: not-accessible
OBJECT-TYPE
	TlpPduIdentEntry

tlpPduIdentNumInputs		1.3.6.1.4.1.850.1.1.3.2.1.2.1.1
The number of input lines supported by the pdu.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpPduIdentNumOutputs		1.3.6.1.4.1.850.1.1.3.2.1.2.1.2
The number of output lines supported by the pdu.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpPduIdentNumPhases		1.3.6.1.4.1.850.1.1.3.2.1.2.1.3
The number of phases supported by the pdu.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpPduIdentNumOutlets		1.3.6.1.4.1.850.1.1.3.2.1.2.1.4
The number of receptacles supported by the pdu.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpPduIdentNumOutletGroups		1.3.6.1.4.1.850.1.1.3.2.1.2.1.5
The number of receptacle groups supported by the pdu.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpPduIdentNumCircuits		1.3.6.1.4.1.850.1.1.3.2.1.2.1.6
The number of circuits supported by the pdu.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpPduIdentNumBreakers		1.3.6.1.4.1.850.1.1.3.2.1.2.1.7
The number of monitored bank breakers supported by the pdu. If the pdu has breakers that are not monitored by the device, the value of zero(0) will be returned.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpPduIdentNumHeatsinks		1.3.6.1.4.1.850.1.1.3.2.1.2.1.8
The number of heatsink thermistors supported by the pdu.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpPduSupportsTable		1.3.6.1.4.1.850.1.1.3.2.1.3
The supported details of each pdu in device table. This is a sparse dependent table, and will contain some subset of devices that are pdus.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		TlpPduSupportsEntry

tlpPduSupportsEntry		1.3.6.1.4.1.850.1.1.3.2.1.3.1
An entry containing supported details for a particular pdu.
Status: current	Access: not-accessible
OBJECT-TYPE
	TlpPduSupportsEntry

tlpPduSupportsEnergywise		1.3.6.1.4.1.850.1.1.3.2.1.3.1.1
Indicates whether the pdu supports Cisco EnergyWise.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

tlpPduSupportsRampShed		1.3.6.1.4.1.850.1.1.3.2.1.3.1.2
Indicates whether the pdu supports ramping and shedding.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

tlpPduSupportsOutletGroup		1.3.6.1.4.1.850.1.1.3.2.1.3.1.3
Indicates whether the pdu supports outlet groups.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

tlpPduSupportsOutletCurrentPower		1.3.6.1.4.1.850.1.1.3.2.1.3.1.4
Indicates whether the pdu reports individual receptacle current and power measurements. Devices that do not support individual receptacle measurements will always return ERROR_NO_SUCH_NAME for tlpPduOutletCurrent and tlpPduOutletPower.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

tlpPduSupportsOutletVoltage		1.3.6.1.4.1.850.1.1.3.2.1.3.1.5
Indicates whether the pdu reports individual receptacle voltage measurements. Devices that do not support individual receptacle measurements will always return ERROR_NO_SUCH_NAME for tlpPduOutletVoltage.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

tlpPduDisplayTable		1.3.6.1.4.1.850.1.1.3.2.1.4
The display details of each pdu in device table. This is a sparse dependent table, and will contain some subset of devices that are pdus.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		TlpPduDisplayEntry

tlpPduDisplayEntry		1.3.6.1.4.1.850.1.1.3.2.1.4.1
An entry containing display details for a particular pdu.
Status: current	Access: not-accessible
OBJECT-TYPE
	TlpPduDisplayEntry

tlpPduDisplayScheme		1.3.6.1.4.1.850.1.1.3.2.1.4.1.1
Indicates the display scheme of the LED display. The value schemeReverse(0) indicates the tricolor LED indicator uses an alternate pattern. The value schemeNormal(1) indicates the LED indicator uses the standard pattern. This value may not be supported on all models. If not supported, the value will always return schemeNormal(1).
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	schemeReverse(0), schemeNormal(1)

tlpPduDisplayOrientation		1.3.6.1.4.1.850.1.1.3.2.1.4.1.2
Indicates the physical orientation of the LED display. The value displayNormal(0) indicates the display is right-side-up (normal). The value displayReverse(1) indicates the display is upside-down. This value may not be supported on all models. If not supported, the value will always return displayNormal(0).
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	displayNormal(0), displayReverse(1)

tlpPduDisplayAutoScroll		1.3.6.1.4.1.850.1.1.3.2.1.4.1.3
Indicates whether the LED display automatically scrolls through displaying status values.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	scrollDisabled(0), scrollEnabled(1)

tlpPduDisplayIntensity		1.3.6.1.4.1.850.1.1.3.2.1.4.1.4
Indicates the intensity, as a percentage, of the LED display. The value intensity100(4) indicates the display is at 100% intensity. The other values indicate the display is at a lesser intensity based upon the respective percentage denoted.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	intensity25(1), intensity50(2), intensity75(3), intensity100(4)

tlpPduDisplayUnits		1.3.6.1.4.1.850.1.1.3.2.1.4.1.5
Indicates the units of measurement displayed on the LED display. The value normal(0) indicates that a temperature value, for example, is displayed in degrees Fahrenheit. The value metric(1) indicates a temperature value is displayed in degrees Celsius.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	normal(0), metric(1)

tlpPduDeviceTable		1.3.6.1.4.1.850.1.1.3.2.2.1
The device details of each pdu in device table. This is a sparse dependent table, and will contain some subset of devices that are pdus.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		TlpPduDeviceEntry

tlpPduDeviceEntry		1.3.6.1.4.1.850.1.1.3.2.2.1.1
An entry containing device details for a particular pdu.
Status: current	Access: not-accessible
OBJECT-TYPE
	TlpPduDeviceEntry

tlpPduDeviceMainLoadState		1.3.6.1.4.1.850.1.1.3.2.2.1.1.1
The current state of the main output of the device.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	unknown(0), off(1), on(2)

tlpPduDeviceMainLoadControllable		1.3.6.1.4.1.850.1.1.3.2.2.1.1.2
Indicates whether or not the main output is controllable, and whether the ups can be turned off and on.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

tlpPduDeviceMainLoadCommand		1.3.6.1.4.1.850.1.1.3.2.2.1.1.3
Reading this value will always return 0. Setting this value to turnOff(1) will turn off the main output of the ups. Setting this value to turnOn(2) will turn on the main output of the ups. Setting this value to cycle(3) will turn off the main output, then turn it back on.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	idle(0), turnOff(1), turnOn(2), cycle(3)

tlpPduDevicePowerOnDelay		1.3.6.1.4.1.850.1.1.3.2.2.1.1.4
The configurable delay value, which sets the amount of additional time a given device will wait before it connects to a valid AC source. By default the delay value is set to 0. For devices with multiple AC input sources, this delay only applies to the primary input source.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32

tlpPduDeviceTotalInputPowerRating		1.3.6.1.4.1.850.1.1.3.2.2.1.1.5
The total input power rating of all phases on the device. This value may not be supported on all models. If not supported, this value will always return ERROR_NO_SUCH_NAME.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

tlpPduDeviceTemperatureC		1.3.6.1.4.1.850.1.1.3.2.2.1.1.6
The ambient temperature at or near the PDU casing. Temperature measurements are not supported on all models. If not supported, this value will always return ERROR_NO_SUCH_NAME.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

tlpPduDeviceTemperatureF		1.3.6.1.4.1.850.1.1.3.2.2.1.1.7
The ambient temperature at or near the PDU casing. Temperature measurements are not supported on all models. If not supported, this value will always return ERROR_NO_SUCH_NAME.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

tlpPduDevicePhaseImbalance		1.3.6.1.4.1.850.1.1.3.2.2.1.1.8
The percentage of imbalance of the three phases. This value is in the range from 0% imbalance to 100% imbalance. The lower the value, the better balanced the phases are. If all load is on a single phase, the imbalance is defined as 100%.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0..200

tlpPduDeviceOutputPowerTotal		1.3.6.1.4.1.850.1.1.3.2.2.1.1.9
The AC output total power for all circuits.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpPduDeviceAggregatePowerFactor		1.3.6.1.4.1.850.1.1.3.2.2.1.1.10
The aggregate power factor of all phases.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpPduDeviceOutputCurrentPrecision		1.3.6.1.4.1.850.1.1.3.2.2.1.1.11
Output current is reported by tlpPduOutputCurrent, tlpPduOutputCurrentMin and tlpPduOutputCurrentMax. These values are all reported in hundredths(0.01A), which accommodates all models; however, on any given device the actual precision may vary. All current values must be divided by 100 to obtain the actual value. For example, if tlpPduOutputCurrent reports 500, then the actual output current is 5.00. This tlpPduDeviceOutputCurrentPrecision defines the actual resolution of that value: wholeNumber(0) is 5, tenths(1) is 5.0 and hundredths(2) is 5.00.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	wholeNumber(0), tenths(1), hundredths(2)

tlpPduInputTable		1.3.6.1.4.1.850.1.1.3.2.3.1.1
The input details of each pdu in device table. This is a sparse dependent table, and will contain the number of entries based upon the number of pdus managed by the agent as reported by tlpPduIdentNumPdus.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		TlpPduInputEntry

tlpPduInputEntry		1.3.6.1.4.1.850.1.1.3.2.3.1.1.1
An entry containing information applicable to a particular pdu managed by this agent.
Status: current	Access: not-accessible
OBJECT-TYPE
	TlpPduInputEntry

tlpPduInputNominalVoltage		1.3.6.1.4.1.850.1.1.3.2.3.1.1.1.1
The nominal value of the input line voltage. This value may not be supported on all models. If not supported, this value will return ERROR_NO_SUCH_NAME.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpPduInputNominalVoltagePhaseToPhase		1.3.6.1.4.1.850.1.1.3.2.3.1.1.1.2
The nominal value of the input line voltage as measured from phase to phase. This value may not be supported on all models. If not supported, this value will always return zero.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpPduInputNominalVoltagePhaseToNeutral		1.3.6.1.4.1.850.1.1.3.2.3.1.1.1.3
The nominal value of the input line voltage as measured from phase to neutral. This value may not be supported on all models. If not supported, this value will always return zero.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpPduInputLowTransferVoltage		1.3.6.1.4.1.850.1.1.3.2.3.1.1.1.4
The minimum line voltage allowed before the unit disconnects the AC input connection. This value may not be writable on all models. If not writable, the value will be rejected and an appropriate error message will be returned. When supported, the minimum and maximum values allowed are dictated by tlpPduInputLowTransferVoltageLowerBound and tlpPduInputLowTransferVoltageUpperBound respectively.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpPduInputLowTransferVoltageLowerBound		1.3.6.1.4.1.850.1.1.3.2.3.1.1.1.5
The lower boundary value of tlpPduInputLowTransferVoltage as dictated by the hardware of the unit.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpPduInputLowTransferVoltageUpperBound		1.3.6.1.4.1.850.1.1.3.2.3.1.1.1.6
The upper boundary value of tlpPduInputLowTransferVoltage as dictated by the hardware of the unit.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpPduInputHighTransferVoltage		1.3.6.1.4.1.850.1.1.3.2.3.1.1.1.7
The maximum line voltage allowed before the unit disconnects the AC input connection. This value may not be writable on all models. If not writable, the value will be rejected and an appropriate error message will be returned. When supported, the minimum and maximum values allowed are dictated by tlpPduInputHighTransferVoltageLowerBound and tlpPduInputHighTransferVoltageUpperBound respectively.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpPduInputHighTransferVoltageLowerBound		1.3.6.1.4.1.850.1.1.3.2.3.1.1.1.8
The lower boundary value of tlpPduInputHighTransferVoltage as dictated by the hardware of the unit.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpPduInputHighTransferVoltageUpperBound		1.3.6.1.4.1.850.1.1.3.2.3.1.1.1.9
The upper boundary value of tlpPduInputHighTransferVoltage as dictated by the hardware of the unit.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpPduInputCurrentLimit		1.3.6.1.4.1.850.1.1.3.2.3.1.1.1.10
The capacity of each phase conductor in the pdu limited by the AC input cord or any other potential limiting factors unique to a given unit.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpPduInputPhaseTable		1.3.6.1.4.1.850.1.1.3.2.3.1.2
The input phase details of each pdu in device table. This is a sparse dependent table, and will contain the number of entries based upon the value of tlpPduIdentNumInputs and tlpPduIdentNumPhases per each device.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		TlpPduInputPhaseEntry

tlpPduInputPhaseEntry		1.3.6.1.4.1.850.1.1.3.2.3.1.2.1
An entry containing information applicable to a particular input phase managed by this agent.
Status: current	Access: not-accessible
OBJECT-TYPE
	TlpPduInputPhaseEntry

tlpPduInputPhaseIndex		1.3.6.1.4.1.850.1.1.3.2.3.1.2.1.1
The table row index for the pdu phase.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpPduInputPhasePhaseType		1.3.6.1.4.1.850.1.1.3.2.3.1.2.1.2
Denotes whether measurements are phase to neutral(0) or phase to phase(1).
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	phaseToNeutral(0), phaseToPhase(1)

tlpPduInputPhaseFrequency		1.3.6.1.4.1.850.1.1.3.2.3.1.2.1.3
The present input frequency for a given phase.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpPduInputPhaseVoltage		1.3.6.1.4.1.850.1.1.3.2.3.1.2.1.4
The magnitude of the present input voltage for a given phase.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpPduInputPhaseVoltageMin		1.3.6.1.4.1.850.1.1.3.2.3.1.2.1.5
The minimum input voltage value since the last reset of this value for a given phase. If any value is written to either tlpPduInputVoltageMin or tlpPduInputVoltageMax, both will be reset to their appropriate minimum and maximum values.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

tlpPduInputPhaseVoltageMax		1.3.6.1.4.1.850.1.1.3.2.3.1.2.1.6
The maximum input voltage value since the last reset of this value for a given phase. If any value is written to either tlpPduInputVoltageMin or tlpPduInputVoltageMax, both will be reset to their appropriate minimum and maximum values.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

tlpPduInputPhaseCurrent		1.3.6.1.4.1.850.1.1.3.2.3.1.2.1.7
The magnitude of the present input current for a given phase.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpPduOutputTable		1.3.6.1.4.1.850.1.1.3.2.3.2.1
The output details of each pdu in device table. This is a sparse dependent table, and will contain the number of entries based upon the value of tlpPduIdentNumOutputs per each device.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		TlpPduOutputEntry

tlpPduOutputEntry		1.3.6.1.4.1.850.1.1.3.2.3.2.1.1
An entry containing output information applicable to a particular phase managed by this agent.
Status: current	Access: not-accessible
OBJECT-TYPE
	TlpPduOutputEntry

tlpPduOutputIndex		1.3.6.1.4.1.850.1.1.3.2.3.2.1.1.1
The table row index for the pdu phase.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpPduOutputPhase		1.3.6.1.4.1.850.1.1.3.2.3.2.1.1.2
Indicates the phase associated with the output line.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	phase1(1), phase2(2), phase3(3)

tlpPduOutputPhaseType		1.3.6.1.4.1.850.1.1.3.2.3.2.1.1.3
Denotes whether measurements are phase to neutral(0) or phase to phase(1).
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	phaseToNeutral(0), phaseToPhase(1)

tlpPduOutputVoltage		1.3.6.1.4.1.850.1.1.3.2.3.2.1.1.4
The magnitude of the present output voltage for a given output line.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpPduOutputCurrent		1.3.6.1.4.1.850.1.1.3.2.3.2.1.1.5
The output current, in hundredths of amps, for a given phase. The actual precision of this value, whether a whole number, tenths or hundredths, is returned by tlpPduDeviceOutputCurrentPrecision.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpPduOutputCurrentMin		1.3.6.1.4.1.850.1.1.3.2.3.2.1.1.6
The minimum current, in hundredths of amps, observed for a given phase since last reset. The actual precision of this value, whether a whole number, tenths or hundredths, is returned by tlpPduDeviceOutputCurrentPrecision.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpPduOutputCurrentMax		1.3.6.1.4.1.850.1.1.3.2.3.2.1.1.7
The maximum current, in hundredths of amps, observed for a given phase since last reset. The actual precision of this value, whether a whole number, tenths or hundredths, is returned by tlpPduDeviceOutputCurrentPrecision.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpPduOutputActivePower		1.3.6.1.4.1.850.1.1.3.2.3.2.1.1.8
The output power for a given phase.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpPduOutputPowerFactor		1.3.6.1.4.1.850.1.1.3.2.3.2.1.1.9
The output power factor, in hundredths of a percent, for a given phase.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpPduOutputSource		1.3.6.1.4.1.850.1.1.3.2.3.2.1.1.10
The present source of output power. The enumeration none(0) indicates that there is no source of output power (and therefore no output power), for example, the system has opened the output breaker.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	none(0), normal(1)

tlpPduOutputFrequency		1.3.6.1.4.1.850.1.1.3.2.3.2.1.1.11
The present output frequency. If not supported, the agent reports ERROR_NO_SUCH_NAME.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpPduOutputCalculatedPowerKVA		1.3.6.1.4.1.850.1.1.3.2.3.2.1.1.12
The calculated amount of apparent power being used.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpPduOutputCalculatedPowerKW		1.3.6.1.4.1.850.1.1.3.2.3.2.1.1.13
The calculated amount of active power being used.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpPduOutputCalculated24hrEnergy		1.3.6.1.4.1.850.1.1.3.2.3.2.1.1.14
Estimated 24 hour power consumption using present value of tlpPduOutputCalculatedPowerKW.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpPduOutletTable		1.3.6.1.4.1.850.1.1.3.2.3.3.1
The receptacle status details of each pdu in device table. This is a sparse dependent table, and will contain the number of entries based upon the value of tlpPduIdentNumOutlets per each device.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		TlpPduOutletEntry

tlpPduOutletEntry		1.3.6.1.4.1.850.1.1.3.2.3.3.1.1
An entry containing information applicable to a particular outlet managed by this agent.
Status: current	Access: not-accessible
OBJECT-TYPE
	TlpPduOutletEntry

tlpPduOutletIndex		1.3.6.1.4.1.850.1.1.3.2.3.3.1.1.1
The table row index for the pdu outlet.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpPduOutletName		1.3.6.1.4.1.850.1.1.3.2.3.3.1.1.2
A user-definable string identifying the name of the outlet.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString

tlpPduOutletDescription		1.3.6.1.4.1.850.1.1.3.2.3.3.1.1.3
A user-definable string identifying the device(s) connected to the given outlet.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString

tlpPduOutletState		1.3.6.1.4.1.850.1.1.3.2.3.3.1.1.4
The current state of the outlet.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	unknown(0), off(1), on(2)

tlpPduOutletControllable		1.3.6.1.4.1.850.1.1.3.2.3.3.1.1.5
Denotes whether this outlet is controllable.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

tlpPduOutletCommand		1.3.6.1.4.1.850.1.1.3.2.3.3.1.1.6
Reading this value will always return 0. Setting this value to turnOff(1) will turn off the outlet. Setting this value to turnOn(2) will turn on the outlet. Setting this value to cycle(3) will turn the outlet off, then turn it back on.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	idle(0), turnOff(1), turnOn(2), cycle(3)

tlpPduOutletVoltage		1.3.6.1.4.1.850.1.1.3.2.3.3.1.1.7
The magnitude of the present output voltage for a given outlet. If the voltage measurement is not supported for an individual receptacle regardless whether device-wide or just for this receptacle, then this value will always return ERROR_NO_SUCH_NAME. Device-wide support for receptacle voltage measurements is denoted by tlpPduSupportsOutletVoltage.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpPduOutletCurrent		1.3.6.1.4.1.850.1.1.3.2.3.3.1.1.8
The present output current, in hundredths of amps, of a given outlet. If the current measurement is not supported for an individual receptacle regardless whether device-wide or just for this receptacle, then this value will always return ERROR_NO_SUCH_NAME. Device-wide support for receptacle current measurements is denoted by tlpPduSupportsCurrentPower.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpPduOutletPower		1.3.6.1.4.1.850.1.1.3.2.3.3.1.1.9
The output power of a given outlet. If the power measurement is not supported for an individual receptacle regardless whether device-wide or just for this receptacle, then this value will always return ERROR_NO_SUCH_NAME. Device-wide support for receptacle power measurements is denoted by tlpPduSupportsCurrentPower.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpPduOutletRampAction		1.3.6.1.4.1.850.1.1.3.2.3.3.1.1.10
The ramp action to take on a given outlet when powering on the device. If this receptacle is not controllable, as denoted by tlpPduOutletControllable, then this value will always return ERROR_NO_SUCH_NAME.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	remainOff(0), turnOnAfterDelay(1)

tlpPduOutletRampDelay		1.3.6.1.4.1.850.1.1.3.2.3.3.1.1.11
The number of seconds to delay before powering on the given outlet. If this receptacle is not controllable, as denoted by tlpPduOutletControllable, then this value will always return ERROR_NO_SUCH_NAME.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32

tlpPduOutletShedAction		1.3.6.1.4.1.850.1.1.3.2.3.3.1.1.12
The shed action to take on a given outlet when powering off the device. If this receptacle is not controllable, as denoted by tlpPduOutletControllable, then this value will always return ERROR_NO_SUCH_NAME.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	remainOn(0), turnOffAfterDelay(1)

tlpPduOutletShedDelay		1.3.6.1.4.1.850.1.1.3.2.3.3.1.1.13
The number of seconds to delay before powering off the given outlet. If this receptacle is not controllable, as denoted by tlpPduOutletControllable, then this value will always return ERROR_NO_SUCH_NAME.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32

tlpPduOutletGroup		1.3.6.1.4.1.850.1.1.3.2.3.3.1.1.14
The tlpPduOutletGroupIndex group index of the respective group to which the given outlet is assigned, or zero (0) if the given outlet is not grouped.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32

tlpPduOutletBank		1.3.6.1.4.1.850.1.1.3.2.3.3.1.1.15
Indicates on which bank the given outlet is located.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

tlpPduOutletCircuit		1.3.6.1.4.1.850.1.1.3.2.3.3.1.1.16
Indicates on which circuit the given outlet is wired.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

tlpPduOutletPhase		1.3.6.1.4.1.850.1.1.3.2.3.3.1.1.17
Indicates on which phase or phases the given outlet is associated. For single phase devices, this object will always return phase1(1). For 3-phase devices with outlets wired to a single phase, this object will return phase1(1), phase2(2) or phase3(3). For 3-phase devices with outlets wired to two phases, this object will return phase1-2(4) for phases 1 and 2, phase2-3(5) for phases 2 and 3, and phase3-1(6) for phases 3 and 1. Devices that do not report phase connections will return unknown(0).
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	unknown(0), phase1(1), phase2(2), phase3(3), phase1-2(4), phase2-3(5), phase3-1(6)

tlpPduOutletGroupTable		1.3.6.1.4.1.850.1.1.3.2.3.3.2
The receptacle grouping details of each pdu in device table. This is a sparse dependent table, and will contain the number of entries based upon the value of tlpPduIdentNumOutletGroups per each device.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		TlpPduOutletGroupEntry

tlpPduOutletGroupEntry		1.3.6.1.4.1.850.1.1.3.2.3.3.2.1
An entry containing information applicable to a particular outlet group managed by this agent.
Status: current	Access: not-accessible
OBJECT-TYPE
	TlpPduOutletGroupEntry

tlpPduOutletGroupIndex		1.3.6.1.4.1.850.1.1.3.2.3.3.2.1.1
The table row index for the pdu outlet group.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpPduOutletGroupRowStatus		1.3.6.1.4.1.850.1.1.3.2.3.3.2.1.2
Row status for the tlpPduOutletGroupTable
Status: current	Access: read-write
OBJECT-TYPE
	RowStatus

tlpPduOutletGroupName		1.3.6.1.4.1.850.1.1.3.2.3.3.2.1.3
The name of this outlet group.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString

tlpPduOutletGroupDescription		1.3.6.1.4.1.850.1.1.3.2.3.3.2.1.4
A description for this outlet group.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString

tlpPduOutletGroupState		1.3.6.1.4.1.850.1.1.3.2.3.3.2.1.5
The current state of the outlet group. This value will report off(1) if all outlets in the group are off, on(2) if all outlets in the group are on, mixed(3) if some outlets in the group are off and others are on, or unknown(0) if the state of the outlets cannot be determined.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	unknown(0), off(1), on(2), mixed(3)

tlpPduOutletGroupCommand		1.3.6.1.4.1.850.1.1.3.2.3.3.2.1.6
Reading this value will always return 0. Setting this value to turnOff(1) will turn off every outlet associated with the group. Setting this value to turnOn(2) will turn on every outlet associated with the group. Setting this value to cycle(3) will turn off every outlet associated with the group, then turn each outlet back on.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	turnOff(1), turnOn(2), cycle(3)

tlpPduCircuitTable		1.3.6.1.4.1.850.1.1.3.2.3.4.1
A list of pdu circuit table entries. The number of entries is given by the value of tlpPduIdentNumCircuits.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		TlpPduCircuitEntry

tlpPduCircuitEntry		1.3.6.1.4.1.850.1.1.3.2.3.4.1.1
An entry containing information applicable to a particular circuit managed by this agent.
Status: current	Access: not-accessible
OBJECT-TYPE
	TlpPduCircuitEntry

tlpPduCircuitIndex		1.3.6.1.4.1.850.1.1.3.2.3.4.1.1.1
The table row index for the pdu circuit.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpPduCircuitPhase		1.3.6.1.4.1.850.1.1.3.2.3.4.1.1.2
Indicates on which phase or phases the given circuit is wired. For single phase devices, this object will always return phase1(1). For 3-phase devices with outlets wired to a single phase, this object will return phase1(1), phase2(2) or phase3(3). For 3-phase devices with outlets wired to two phases, this object will return phase1-2(4) for phases 1 and 2, phase2-3(5) for phases 2 and 3, and phase3-1(6) for phases 3 and 1. Devices that do not report phase connections will return unknown(0).
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	unknown(0), phase1(1), phase2(2), phase3(3), phase1-2(4), phase2-3(5), phase3-1(6)

tlpPduCircuitInputVoltage		1.3.6.1.4.1.850.1.1.3.2.3.4.1.1.3
The input voltage for a circuit.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

tlpPduCircuitTotalCurrent		1.3.6.1.4.1.850.1.1.3.2.3.4.1.1.4
The total current, in hundredths of amps, for all receptacles in a given circuit.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

tlpPduCircuitCurrentLimit		1.3.6.1.4.1.850.1.1.3.2.3.4.1.1.5
The current capacity, in hundredths of amps, of a circuit in the system limited by the circuit breaker or wiring used in a given unit.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

tlpPduCircuitCurrentMin		1.3.6.1.4.1.850.1.1.3.2.3.4.1.1.6
The minimum total current, in hundredths of amps, for all receptacles in a given circuit since last reset.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

tlpPduCircuitCurrentMax		1.3.6.1.4.1.850.1.1.3.2.3.4.1.1.7
The maximum total current, in hundredths of amps, for all receptacles in a given circuit since last reset.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

tlpPduCircuitTotalPower		1.3.6.1.4.1.850.1.1.3.2.3.4.1.1.8
The total power for all receptacles in a given circuit.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

tlpPduCircuitPowerFactor		1.3.6.1.4.1.850.1.1.3.2.3.4.1.1.9
The power factor for all receptacles in a given circuit.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0..200

tlpPduCircuitUtilization		1.3.6.1.4.1.850.1.1.3.2.3.4.1.1.10
The percentage of utilization of a given circuit. This is typically a calculation of tlpPduCircuitTotalCurrent / tlpPduCircuitCurrentLimit.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpPduBreakerTable		1.3.6.1.4.1.850.1.1.3.2.3.5.1
A list of pdu bank breaker table entries. The number of entries is given by the value of tlpPduIdentNumBreakers.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		TlpPduBreakerEntry

tlpPduBreakerEntry		1.3.6.1.4.1.850.1.1.3.2.3.5.1.1
An entry containing information applicable to a particular bank breaker managed by this agent.
Status: current	Access: not-accessible
OBJECT-TYPE
	TlpPduBreakerEntry

tlpPduBreakerIndex		1.3.6.1.4.1.850.1.1.3.2.3.5.1.1.1
The table row index for the pdu bank breaker.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpPduBreakerStatus		1.3.6.1.4.1.850.1.1.3.2.3.5.1.1.2
Indicates whether the bank breaker is open(0), closed(1) or not installed(2).
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	open(0), closed(1), notInstalled(2)

tlpPduHeatsinkTable		1.3.6.1.4.1.850.1.1.3.2.3.6.1
A list of pdu heatsink thermistor table entries. The number of entries is given by the value of tlpPduIdentNumHeatsinks.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		TlpPduHeatsinkEntry

tlpPduHeatsinkEntry		1.3.6.1.4.1.850.1.1.3.2.3.6.1.1
An entry containing information applicable to a particular heatsink thermistor managed by this agent.
Status: current	Access: not-accessible
OBJECT-TYPE
	TlpPduHeatsinkEntry

tlpPduHeatsinkIndex		1.3.6.1.4.1.850.1.1.3.2.3.6.1.1.1
The table row index for the pdu heatsink thermistor.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpPduHeatsinkStatus		1.3.6.1.4.1.850.1.1.3.2.3.6.1.1.2
Indicates whether the heatsink thermistor is available. The entry will return notAvailable(0) if a thermistor is either non-existent or disconnected, or available(1) when connected.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	notAvailable(0), available(1)

tlpPduHeatsinkTemperatureC		1.3.6.1.4.1.850.1.1.3.2.3.6.1.1.3
The temperature at the heatsink thermistor in tenths degrees Celsius. Heatsink temperature measurements are not supported on all models. If not supported, this value will always return ERROR_NO_SUCH_NAME.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

tlpPduHeatsinkTemperatureF		1.3.6.1.4.1.850.1.1.3.2.3.6.1.1.4
The temperature at the heatsink thermistor in tenths degrees Fahrenheit. Heatsink temperature measurements are not supported on all models. If not supported, this value will always return ERROR_NO_SUCH_NAME.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

tlpPduControlTable		1.3.6.1.4.1.850.1.1.3.2.4.1
The actionable controls for each pdu in device table. This is a sparse dependent table, and will contain some subset of devices that are pdus.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		TlpPduControlEntry

tlpPduControlEntry		1.3.6.1.4.1.850.1.1.3.2.4.1.1
An entry containing controls for a particular pdu.
Status: current	Access: not-accessible
OBJECT-TYPE
	TlpPduControlEntry

tlpPduControlRamp		1.3.6.1.4.1.850.1.1.3.2.4.1.1.1
Set to TRUE to initiate the pre-designated ramp sequence on the pdu.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

tlpPduControlShed		1.3.6.1.4.1.850.1.1.3.2.4.1.1.2
Set to TRUE to initiate the pre-designated shed sequence on the pdu.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

tlpPduControlPduOn		1.3.6.1.4.1.850.1.1.3.2.4.1.1.3
Set to TRUE to turn the pdu on.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

tlpPduControlPduOff		1.3.6.1.4.1.850.1.1.3.2.4.1.1.4
Set to TRUE to turn the pdu off.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

tlpPduControlPduReboot		1.3.6.1.4.1.850.1.1.3.2.4.1.1.5
Set to TRUE to reboot the pdu.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

tlpPduConfigTable		1.3.6.1.4.1.850.1.1.3.2.5.1
The configuration options of each pdu in device table. This is a sparse dependent table, and will contain some subset of devices that are pdus. Not all options are available on all pdus.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		TlpPduConfigEntry

tlpPduConfigEntry		1.3.6.1.4.1.850.1.1.3.2.5.1.1
An entry containing configuration options for a particular pdu.
Status: current	Access: not-accessible
OBJECT-TYPE
	TlpPduConfigEntry

tlpPduConfigInputVoltage		1.3.6.1.4.1.850.1.1.3.2.5.1.1.1
The nominal value of the input line voltage. This value may not be supported on all models. If not supported, this value will return ERROR_NO_SUCH_NAME. This value may not be writable on all models. If not writable, the value will be rejected and an appropriate error message will be returned.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

tlpPduConfigPhaseThresholdTable		1.3.6.1.4.1.850.1.1.3.2.5.2
The configuration options of each pdu in device table. This is a sparse dependent table, and will contain some subset of devices that are pdus. Not all options are available on all pdus.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		TlpPduConfigPhaseThresholdEntry

tlpPduConfigPhaseThresholdEntry		1.3.6.1.4.1.850.1.1.3.2.5.2.1
An entry containing threshold configuration options for a particular pdu.
Status: current	Access: not-accessible
OBJECT-TYPE
	TlpPduConfigPhaseThresholdEntry

tlpPduPhaseIndex		1.3.6.1.4.1.850.1.1.3.2.5.2.1.1
The table row index for the pdu phase.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpPduConfigOutputCurrentThresholdTolerance		1.3.6.1.4.1.850.1.1.3.2.5.2.1.2
The threshold tolerance value used together with output current high/low threshold to evaluate output current high/low condition.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

tlpPduConfigOutputCurrentHighThreshold		1.3.6.1.4.1.850.1.1.3.2.5.2.1.3
The value at which a output current high condition is declared.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

tlpPduConfigOutputCurrentLowThreshold		1.3.6.1.4.1.850.1.1.3.2.5.2.1.4
The value at which a output current low condition is declared.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

tlpEnvIdentNumEnvirosense		1.3.6.1.4.1.850.1.1.3.3.1.1
The number of envirosense devices that this agent is currently managing.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpEnvIdentTable		1.3.6.1.4.1.850.1.1.3.3.1.2
The identity details of each envirosense in device table. This is a sparse dependent table, and will contain some subset of devices that are envirosenses.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		TlpEnvIdentEntry

tlpEnvIdentEntry		1.3.6.1.4.1.850.1.1.3.3.1.2.1
An entry containing details for a particular envirosense.
Status: current	Access: not-accessible
OBJECT-TYPE
	TlpEnvIdentEntry

tlpEnvIdentTempSupported		1.3.6.1.4.1.850.1.1.3.3.1.2.1.1
Indicates whether or not temperature is supported.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

tlpEnvIdentHumiditySupported		1.3.6.1.4.1.850.1.1.3.3.1.2.1.2
Indicates whether or not temperature is supported.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

tlpEnvNumInputContacts		1.3.6.1.4.1.850.1.1.3.3.1.2.1.3
The number of input contacts supported by the envirosense.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpEnvNumOutputContacts		1.3.6.1.4.1.850.1.1.3.3.1.2.1.4
The number of output contacts supported by the envirosense.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpEnvTemperatureTable		1.3.6.1.4.1.850.1.1.3.3.3.1
The temperature details of each envirosense in device table. The number of entries is given by the value of tlpDevicesNumDevices.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		TlpEnvTemperatureEntry

tlpEnvTemperatureEntry		1.3.6.1.4.1.850.1.1.3.3.3.1.1
An entry containing temperature details for a particular envirosense.
Status: current	Access: not-accessible
OBJECT-TYPE
	TlpEnvTemperatureEntry

tlpEnvTemperatureC		1.3.6.1.4.1.850.1.1.3.3.3.1.1.1
The ambient temperature.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

tlpEnvTemperatureF		1.3.6.1.4.1.850.1.1.3.3.3.1.1.2
The ambient temperature.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

tlpEnvTemperatureInAlarm		1.3.6.1.4.1.850.1.1.3.3.3.1.1.3
Indicates whether or not temperature is in alarm.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

tlpEnvHumidityTable		1.3.6.1.4.1.850.1.1.3.3.3.2
The humidity details of each envirosense in device table. The number of entries is given by the value of tlpDevicesNumDevices.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		TlpEnvHumidityEntry

tlpEnvHumidityEntry		1.3.6.1.4.1.850.1.1.3.3.3.2.1
An entry containing humidity details for a particular envirosense.
Status: current	Access: not-accessible
OBJECT-TYPE
	TlpEnvHumidityEntry

tlpEnvHumidityHumidity		1.3.6.1.4.1.850.1.1.3.3.3.2.1.1
The ambient humidity.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0..100

tlpEnvHumidityInAlarm		1.3.6.1.4.1.850.1.1.3.3.3.2.1.2
Indicates whether or not humidity is in alarm.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

tlpEnvInputContactTable		1.3.6.1.4.1.850.1.1.3.3.3.3
The input contact details of each envirosense in device table. The number of entries is given by the value of tlpDevicesNumDevices.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		TlpEnvInputContactEntry

tlpEnvInputContactEntry		1.3.6.1.4.1.850.1.1.3.3.3.3.1
An entry containing input contact details for a particular envirosense.
Status: current	Access: not-accessible
OBJECT-TYPE
	TlpEnvInputContactEntry

tlpEnvInputContactIndex		1.3.6.1.4.1.850.1.1.3.3.3.3.1.1
The table row index for the envirosense input contact details.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpEnvInputContactName		1.3.6.1.4.1.850.1.1.3.3.3.3.1.2
The name or description of the contact.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString

tlpEnvInputContactNormalState		1.3.6.1.4.1.850.1.1.3.3.3.3.1.3
The normal operating position of the contact.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	open(0), closed(1)

tlpEnvInputContactCurrentState		1.3.6.1.4.1.850.1.1.3.3.3.3.1.4
The current state of the contact.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	open(0), closed(1)

tlpEnvInputContactInAlarm		1.3.6.1.4.1.850.1.1.3.3.3.3.1.5
Indicates whether or not the contact is in alarm.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

tlpEnvOutputContactTable		1.3.6.1.4.1.850.1.1.3.3.3.4
The output contact details of each envirosense in device table. The number of entries is given by the value of tlpDevicesNumDevices.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		TlpEnvOutputContactEntry

tlpEnvOutputContactEntry		1.3.6.1.4.1.850.1.1.3.3.3.4.1
An entry containing output contact details for a particular envirosense.
Status: current	Access: not-accessible
OBJECT-TYPE
	TlpEnvOutputContactEntry

tlpEnvOutputContactIndex		1.3.6.1.4.1.850.1.1.3.3.3.4.1.1
The table row index for the envirosense output contact details.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpEnvOutputContactName		1.3.6.1.4.1.850.1.1.3.3.3.4.1.2
The name or description of the contact.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString

tlpEnvOutputContactNormalState		1.3.6.1.4.1.850.1.1.3.3.3.4.1.3
The normal operating position of the contact.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	open(0), closed(1)

tlpEnvOutputContactCurrentState		1.3.6.1.4.1.850.1.1.3.3.3.4.1.4
The current state of the contact.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	open(0), closed(1)

tlpEnvOutputContactInAlarm		1.3.6.1.4.1.850.1.1.3.3.3.4.1.5
Indicates whether or not the contact is in alarm.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

tlpEnvConfigTable		1.3.6.1.4.1.850.1.1.3.3.5.1
The configuration options of each envirosense in device table. This is a sparse dependent table, and will contain some subset of devices that are envirosenses. Not all options are available on all envirosenses.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		TlpEnvConfigEntry

tlpEnvConfigEntry		1.3.6.1.4.1.850.1.1.3.3.5.1.1
An entry containing configuration options for a particular envirosenses.
Status: current	Access: not-accessible
OBJECT-TYPE
	TlpEnvConfigEntry

tlpEnvTemperatureLowLimit		1.3.6.1.4.1.850.1.1.3.3.5.1.1.1
The lower alarm limit for ambient temperature.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32

tlpEnvTemperatureHighLimit		1.3.6.1.4.1.850.1.1.3.3.5.1.1.2
The upper alarm limit for ambient temperature.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32

tlpEnvHumidityLowLimit		1.3.6.1.4.1.850.1.1.3.3.5.1.1.3
The lower alarm limit for ambient humidity.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	0..100

tlpEnvHumidityHighLimit		1.3.6.1.4.1.850.1.1.3.3.5.1.1.4
The upper alarm limit for ambient humidity.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	0..100

tlpAtsIdentNumAts		1.3.6.1.4.1.850.1.1.3.4.1.1
The number of ats devices that this agent is currently managing.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpAtsIdentTable		1.3.6.1.4.1.850.1.1.3.4.1.2
The identity details of each ats in device table. This is a sparse dependent table, and will contain some subset of devices that are atss.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		TlpAtsIdentEntry

tlpAtsIdentEntry		1.3.6.1.4.1.850.1.1.3.4.1.2.1
An entry containing details for a particular ats.
Status: current	Access: not-accessible
OBJECT-TYPE
	TlpAtsIdentEntry

tlpAtsIdentNumInputs		1.3.6.1.4.1.850.1.1.3.4.1.2.1.1
The number of inputs supported by the ats.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpAtsIdentNumOutputs		1.3.6.1.4.1.850.1.1.3.4.1.2.1.2
The number of outputs supported by the ats.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpAtsIdentNumPhases		1.3.6.1.4.1.850.1.1.3.4.1.2.1.3
The number of phases per input supported by the ats.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpAtsIdentNumOutlets		1.3.6.1.4.1.850.1.1.3.4.1.2.1.4
The number of receptacles supported by the ats.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpAtsIdentNumOutletGroups		1.3.6.1.4.1.850.1.1.3.4.1.2.1.5
The number of receptacle groups supported by the ats.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpAtsIdentNumCircuits		1.3.6.1.4.1.850.1.1.3.4.1.2.1.6
The number of circuits supported by the ats.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpAtsIdentNumBreakers		1.3.6.1.4.1.850.1.1.3.4.1.2.1.7
The number of monitored bank breakers supported by the ats. If the ats has breakers that are not monitored by the device, the value of zero(0) will be returned.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpAtsIdentNumHeatsinks		1.3.6.1.4.1.850.1.1.3.4.1.2.1.8
The number of heatsink thermistors supported by the ats.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpAtsSupportsTable		1.3.6.1.4.1.850.1.1.3.4.1.3
The supported details of each ats in device table. This is a sparse dependent table, and will contain some subset of devices that are atss.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		TlpAtsSupportsEntry

tlpAtsSupportsEntry		1.3.6.1.4.1.850.1.1.3.4.1.3.1
An entry containing supported details for a particular ats.
Status: current	Access: not-accessible
OBJECT-TYPE
	TlpAtsSupportsEntry

tlpAtsSupportsEnergywise		1.3.6.1.4.1.850.1.1.3.4.1.3.1.1
Indicates whether the ats supports Cisco EnergyWise.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

tlpAtsSupportsRampShed		1.3.6.1.4.1.850.1.1.3.4.1.3.1.2
Indicates whether the ats supports ramping and shedding.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

tlpAtsSupportsOutletGroup		1.3.6.1.4.1.850.1.1.3.4.1.3.1.3
Indicates whether the ats supports outlet groups.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

tlpAtsSupportsOutletCurrentPower		1.3.6.1.4.1.850.1.1.3.4.1.3.1.4
Indicates whether the ats reports individual receptacle current and power measurements. Devices that do not support individual receptacle measurements will always return ERROR_NO_SUCH_NAME for tlpAtsOutletCurrent and tlpAtsOutletPower.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

tlpAtsSupportsOutletVoltage		1.3.6.1.4.1.850.1.1.3.4.1.3.1.5
Indicates whether the ats reports individual receptacle voltage measurements. Devices that do not support individual receptacle measurements will always return ERROR_NO_SUCH_NAME for tlpAtsOutletVoltage.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

tlpAtsDisplayTable		1.3.6.1.4.1.850.1.1.3.4.1.4
The display details of each ats in device table. This is a sparse dependent table, and will contain some subset of devices that are atss.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		TlpAtsDisplayEntry

tlpAtsDisplayEntry		1.3.6.1.4.1.850.1.1.3.4.1.4.1
An entry containing display details for a particular ats.
Status: current	Access: not-accessible
OBJECT-TYPE
	TlpAtsDisplayEntry

tlpAtsDisplayScheme		1.3.6.1.4.1.850.1.1.3.4.1.4.1.1
Indicates the display scheme of the LED display. The value schemeReverse(0) indicates the tricolor LED indicator uses an alternate pattern. The value schemeNormal(1) indicates the LED indicator uses the standard pattern. This value may not be supported on all models. If not supported, the value will always return schemeNormal(1).
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	schemeReverse(0), schemeNormal(1)

tlpAtsDisplayOrientation		1.3.6.1.4.1.850.1.1.3.4.1.4.1.2
Indicates the physical orientation of the LED display. The value displayNormal(0) indicates the display is right-side-up (normal). The value displayReverse(1) indicates the display is upside-down. This value may not be supported on all models. If not supported, the value will always return displayNormal(0).
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	displayNormal(0), displayReverse(1)

tlpAtsDisplayAutoScroll		1.3.6.1.4.1.850.1.1.3.4.1.4.1.3
Indicates whether the LED display automatically scrolls through displaying status values.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	scrollDisabled(0), scrollEnabled(1)

tlpAtsDisplayIntensity		1.3.6.1.4.1.850.1.1.3.4.1.4.1.4
Indicates the intensity, as a percentage, of the LED display. The value intensity100(4) indicates the display is at 100% intensity. The other values indicate the display is at a lesser intensity based upon the respective percentage denoted.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	intensity25(1), intensity50(2), intensity75(3), intensity100(4)

tlpAtsDisplayUnits		1.3.6.1.4.1.850.1.1.3.4.1.4.1.5
Indicates the units of measurement displayed on the LED display. The value normal(0) indicates that a temperature value, for example, is displayed in degrees Fahrenheit. The value metric(1) indicates a temperature value is displayed in degrees Celsius.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	normal(0), metric(1)

tlpAtsDeviceTable		1.3.6.1.4.1.850.1.1.3.4.2.1
The device details of each ats in device table. This is a sparse dependent table, and will contain some subset of devices that are atss.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		TlpAtsDeviceEntry

tlpAtsDeviceEntry		1.3.6.1.4.1.850.1.1.3.4.2.1.1
An entry containing device details for a particular ats.
Status: current	Access: not-accessible
OBJECT-TYPE
	TlpAtsDeviceEntry

tlpAtsDeviceMainLoadState		1.3.6.1.4.1.850.1.1.3.4.2.1.1.1
The current state of the main output of the device.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	unknown(0), off(1), on(2)

tlpAtsDeviceMainLoadControllable		1.3.6.1.4.1.850.1.1.3.4.2.1.1.2
Indicates whether or not the main output is controllable, and whether the ups can be turned off and on.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

tlpAtsDeviceMainLoadCommand		1.3.6.1.4.1.850.1.1.3.4.2.1.1.3
Reading this value will always return 0. Setting this value to turnOff(1) will turn off the main output of the ups. Setting this value to turnOn(2) will turn on the main output of the ups. Setting this value to cycle(3) will turn off the main output, then turn it back on.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	idle(0), turnOff(1), turnOn(2), cycle(3)

tlpAtsDevicePowerOnDelay		1.3.6.1.4.1.850.1.1.3.4.2.1.1.4
The configurable delay value, which sets the amount of additional time a given device will wait before it connects to a valid AC source. By default the delay value is set to 0. For devices with multiple AC input sources, this delay only applies to the primary input source.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32

tlpAtsDeviceTotalInputPowerRating		1.3.6.1.4.1.850.1.1.3.4.2.1.1.5
The total input power rating of all phases on the device. This value may not be supported on all models. If not supported, this value will always return ERROR_NO_SUCH_NAME.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

tlpAtsDeviceTemperatureC		1.3.6.1.4.1.850.1.1.3.4.2.1.1.6
The ambient temperature at or near the ats casing. Temperature measurements are not supported on all models. If not supported, this value will always return ERROR_NO_SUCH_NAME.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

tlpAtsDeviceTemperatureF		1.3.6.1.4.1.850.1.1.3.4.2.1.1.7
The ambient temperature at or near the ats casing. Temperature measurements are not supported on all models. If not supported, this value will always return ERROR_NO_SUCH_NAME.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

tlpAtsDevicePhaseImbalance		1.3.6.1.4.1.850.1.1.3.4.2.1.1.8
The percentage of imbalance of the three phases. This value is in the range from 0% imbalance to 100% imbalance. The lower the value, the better balanced the phases are. If all load is on a single phase, the imbalance is defined as 100%.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0..200

tlpAtsDeviceOutputPowerTotal		1.3.6.1.4.1.850.1.1.3.4.2.1.1.9
The AC output total power for all circuits.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpAtsDeviceAggregatePowerFactor		1.3.6.1.4.1.850.1.1.3.4.2.1.1.10
The aggregate power factor of all phases.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpAtsDeviceOutputCurrentPrecision		1.3.6.1.4.1.850.1.1.3.4.2.1.1.11
Output current is reported by tlpAtsOutputCurrent, tlpAtsOutputCurrentMin and tlpAtsOutputCurrentMax. These values are all reported in hundredths (0.01A), which accommodates all models; however, on any given device the actual precision may vary. This value describes the actual precision, which can be used as a divisor against the output current values to obtain the true output current measurement. For example, if tlpAtsOutputCurrent reports 530 and tlpAtsDeviceOutputCurrentPrecision is tenths(1), then the actual output current is 5.3.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	none(0), tenths(1), hundredths(2)

tlpAtsDeviceGeneralFault		1.3.6.1.4.1.850.1.1.3.4.2.1.1.12
Indicates whether or not the ats is in a system fault condition. When the ats is in such a fault condition, the condition can be cleared with tlpAtsControlResetGeneralFault.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

tlpAtsInputTable		1.3.6.1.4.1.850.1.1.3.4.3.1.1
The input details of each ats in device table. This is a sparse dependent table, and will contain the number of entries based upon the number of atss managed by the agent as reported by tlpAtsIdentNumAts.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		TlpAtsInputEntry

tlpAtsInputEntry		1.3.6.1.4.1.850.1.1.3.4.3.1.1.1
An entry containing information applicable to a particular primary input phase managed by this agent.
Status: current	Access: not-accessible
OBJECT-TYPE
	TlpAtsInputEntry

tlpAtsInputNominalVoltage		1.3.6.1.4.1.850.1.1.3.4.3.1.1.1.1
The nominal value of the input line voltage. This value may not be supported on all models. If not supported, this value will return ERROR_NO_SUCH_NAME.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpAtsInputNominalVoltagePhaseToPhase		1.3.6.1.4.1.850.1.1.3.4.3.1.1.1.2
The nominal value of the input line voltage as measured from phase to phase. This value may not be supported on all models. If not supported, this value will always return zero.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpAtsInputNominalVoltagePhaseToNeutral		1.3.6.1.4.1.850.1.1.3.4.3.1.1.1.3
The nominal value of the input line voltage as measured from phase to neutral. This value may not be supported on all models. If not supported, this value will always return zero.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpAtsInputBadTransferVoltage		1.3.6.1.4.1.850.1.1.3.4.3.1.1.1.4
The minimum line voltage allowed before the unit disconnects the AC input connection.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpAtsInputBadTransferVoltageLowerBound		1.3.6.1.4.1.850.1.1.3.4.3.1.1.1.5
The lower boundary value of tlpAtsInputBadTransferVoltage as dictated by the hardware of the unit.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpAtsInputBadTransferVoltageUpperBound		1.3.6.1.4.1.850.1.1.3.4.3.1.1.1.6
The upper boundary value of tlpAtsInputBadTransferVoltage as dictated by the hardware of the unit.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpAtsInputHighTransferVoltage		1.3.6.1.4.1.850.1.1.3.4.3.1.1.1.7
The maximum line voltage allowed before the unit disconnects the AC input connection.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpAtsInputHighTransferVoltageLowerBound		1.3.6.1.4.1.850.1.1.3.4.3.1.1.1.8
The lower boundary value of tlpAtsInputHighTransferVoltage as dictated by the hardware of the unit.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpAtsInputHighTransferVoltageUpperBound		1.3.6.1.4.1.850.1.1.3.4.3.1.1.1.9
The upper boundary value of tlpAtsInputHighTransferVoltage as dictated by the hardware of the unit.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpAtsInputFairVoltageThreshold		1.3.6.1.4.1.850.1.1.3.4.3.1.1.1.10
The voltage level at which the device will transition between sources.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpAtsInputBadVoltageThreshold		1.3.6.1.4.1.850.1.1.3.4.3.1.1.1.11
The minimum line voltage allowed before the device disconnects the AC input connection.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpAtsInputSourceAvailability		1.3.6.1.4.1.850.1.1.3.4.3.1.1.1.12
The determination as to which of two AC input lines are available. The agent will return either inputSourceA(1) or inputSourceB(2) if only one line is available, or inputSourceAB(3) if both lines are available. The agent will never return none(0) since the device will be powered off if neither line is available.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	none(0), inputSourceA(1), inputSourceB(2), inputSourceAB(3)

tlpAtsInputSourceInUse		1.3.6.1.4.1.850.1.1.3.4.3.1.1.1.13
The determination as to which one of two AC input lines is in use. Not all devices support the reporting of which source is currently in use. If not supported, this value will always return ERROR_NO_SUCH_NAME.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	inputSourceA(0), inputSourceB(1)

tlpAtsInputSourceTransitionCount		1.3.6.1.4.1.850.1.1.3.4.3.1.1.1.14
The number of times the device transitions between primary and secondary sources. Most devices are limited to 65533 transitions, after which the value will not increment. If not supported, this value will always return ERROR_NO_SUCH_NAME.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpAtsInputCurrentLimit		1.3.6.1.4.1.850.1.1.3.4.3.1.1.1.15
The capacity of each phase conductor in the ats limited by the AC input cord or any other potential limiting factors unique to a given unit. If not supported, this value will always return ERROR_NO_SUCH_NAME.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpAtsInputPhaseTable		1.3.6.1.4.1.850.1.1.3.4.3.1.2
The input phase details of each ats in device table. This is a sparse dependent table, and will contain the number of entries based upon the value of tlpAtsIdentNumInputs and tlpAtsIdentNumPhases per each device.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		TlpAtsInputPhaseEntry

tlpAtsInputPhaseEntry		1.3.6.1.4.1.850.1.1.3.4.3.1.2.1
An entry containing information applicable to a particular primary input phase managed by this agent.
Status: current	Access: not-accessible
OBJECT-TYPE
	TlpAtsInputPhaseEntry

tlpAtsInputLineIndex		1.3.6.1.4.1.850.1.1.3.4.3.1.2.1.1
The table row index for the input line on the ats.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpAtsInputPhaseIndex		1.3.6.1.4.1.850.1.1.3.4.3.1.2.1.2
The table row index for the input phase for the input line.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpAtsInputPhaseType		1.3.6.1.4.1.850.1.1.3.4.3.1.2.1.3
Denotes whether measurements are phase to neutral(0) or phase to phase(1).
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	phaseToNeutral(0), phaseToPhase(1)

tlpAtsInputPhaseFrequency		1.3.6.1.4.1.850.1.1.3.4.3.1.2.1.4
The present input frequency for a given phase.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpAtsInputPhaseVoltage		1.3.6.1.4.1.850.1.1.3.4.3.1.2.1.5
The magnitude of the present input voltage for a given phase.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpAtsInputPhaseVoltageMin		1.3.6.1.4.1.850.1.1.3.4.3.1.2.1.6
The minimum input voltage value since the last reset of this value for a given phase. If any value is written to either tlpAtsInputVoltageMin or tlpAtsInputVoltageMax, both will be reset to their appropriate minimum and maximum values.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

tlpAtsInputPhaseVoltageMax		1.3.6.1.4.1.850.1.1.3.4.3.1.2.1.7
The maximum input voltage value since the last reset of this value for a given phase. If any value is written to either tlpAtsInputVoltageMin or tlpAtsInputVoltageMax, both will be reset to their appropriate minimum and maximum values.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

tlpAtsInputPhaseCurrent		1.3.6.1.4.1.850.1.1.3.4.3.1.2.1.8
The magnitude of the present input current for a given phase.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpAtsOutputTable		1.3.6.1.4.1.850.1.1.3.4.3.2.1
The output details of each ats in device table. This is a sparse dependent table, and will contain the number of entries based upon the value of tlpAtsIdentNumOutputs per each device.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		TlpAtsOutputEntry

tlpAtsOutputEntry		1.3.6.1.4.1.850.1.1.3.4.3.2.1.1
An entry containing output information applicable to a particular phase managed by this agent.
Status: current	Access: not-accessible
OBJECT-TYPE
	TlpAtsOutputEntry

tlpAtsOutputIndex		1.3.6.1.4.1.850.1.1.3.4.3.2.1.1.1
The table row index for the ats phase.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpAtsOutputPhase		1.3.6.1.4.1.850.1.1.3.4.3.2.1.1.2
Indicates the phase associated with the output line.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	phase1(1), phase2(2), phase3(3)

tlpAtsOutputPhaseType		1.3.6.1.4.1.850.1.1.3.4.3.2.1.1.3
Denotes whether measurements are phase to neutral(0) or phase to phase(1).
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	phaseToNeutral(0), phaseToPhase(1)

tlpAtsOutputVoltage		1.3.6.1.4.1.850.1.1.3.4.3.2.1.1.4
The magnitude of the present output voltage for a given output line.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpAtsOutputCurrent		1.3.6.1.4.1.850.1.1.3.4.3.2.1.1.5
The output current, in hundredths of amps, for a given phase. The actual precision of this value, whether a whole number, tenths or hundredths, is returned by tlpAtsDeviceOutputCurrentPrecision.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpAtsOutputCurrentMin		1.3.6.1.4.1.850.1.1.3.4.3.2.1.1.6
The minimum current, in hundredths of amps, observed for a given phase since last reset. The actual precision of this value, whether a whole number, tenths or hundredths, is returned by tlpAtsDeviceOutputCurrentPrecision.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpAtsOutputCurrentMax		1.3.6.1.4.1.850.1.1.3.4.3.2.1.1.7
The maximum current, in hundredths of amps, observed for a given phase since last reset. The actual precision of this value, whether a whole number, tenths or hundredths, is returned by tlpAtsDeviceOutputCurrentPrecision.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpAtsOutputActivePower		1.3.6.1.4.1.850.1.1.3.4.3.2.1.1.8
The output power for a given phase.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpAtsOutputPowerFactor		1.3.6.1.4.1.850.1.1.3.4.3.2.1.1.9
The output power factor, in hundredths of a percent, for a given phase.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpAtsOutputSource		1.3.6.1.4.1.850.1.1.3.4.3.2.1.1.10
The present source of output power. The enumeration none(0) indicates that there is no source of output power (and therefore no output power), for example, the system has opened the output breaker.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	none(0), normal(1)

tlpAtsOutputFrequency		1.3.6.1.4.1.850.1.1.3.4.3.2.1.1.11
The present output frequency. If not supported, the agent reports ERROR_NO_SUCH_NAME.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpAtsOutputCalculatedPowerKVA		1.3.6.1.4.1.850.1.1.3.4.3.2.1.1.12
The calculated amount of apparent power being used.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpAtsOutputCalculatedPowerKW		1.3.6.1.4.1.850.1.1.3.4.3.2.1.1.13
The calculated amount of active power being used.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpAtsOutputCalculated24hrEnergy		1.3.6.1.4.1.850.1.1.3.4.3.2.1.1.14
Estimated 24 hour power consumption using present value of tlpAtsOutputCalculatedPowerKW.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpAtsOutletTable		1.3.6.1.4.1.850.1.1.3.4.3.3.1
The receptacle status details of each ats in device table. This is a sparse dependent table, and will contain the number of entries based upon the value of tlpAtsIdentNumOutlets per each device.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		TlpAtsOutletEntry

tlpAtsOutletEntry		1.3.6.1.4.1.850.1.1.3.4.3.3.1.1
An entry containing information applicable to a particular outlet managed by this agent.
Status: current	Access: not-accessible
OBJECT-TYPE
	TlpAtsOutletEntry

tlpAtsOutletIndex		1.3.6.1.4.1.850.1.1.3.4.3.3.1.1.1
The table row index for the ats outlet.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpAtsOutletName		1.3.6.1.4.1.850.1.1.3.4.3.3.1.1.2
A user-definable string identifying the name of the outlet.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString

tlpAtsOutletDescription		1.3.6.1.4.1.850.1.1.3.4.3.3.1.1.3
A user-definable string identifying the device(s) connected to the given outlet.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString

tlpAtsOutletState		1.3.6.1.4.1.850.1.1.3.4.3.3.1.1.4
The current state of the outlet.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	unknown(0), off(1), on(2)

tlpAtsOutletControllable		1.3.6.1.4.1.850.1.1.3.4.3.3.1.1.5
Denotes whether this outlet is controllable.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

tlpAtsOutletCommand		1.3.6.1.4.1.850.1.1.3.4.3.3.1.1.6
Reading this value will always return 0. Setting this value to turnOff(1) will turn off the outlet. Setting this value to turnOn(2) will turn on the outlet. Setting this value to cycle(3) will turn the outlet off, then turn it back on.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	idle(0), turnOff(1), turnOn(2), cycle(3)

tlpAtsOutletVoltage		1.3.6.1.4.1.850.1.1.3.4.3.3.1.1.7
The magnitude of the present output voltage for a given outlet. If the voltage measurement is not supported for an individual receptacle regardless whether device-wide or just for this receptacle, then this value will always return ERROR_NO_SUCH_NAME. Device-wide support for receptacle voltage measurements is denoted by tlpAtsSupportsOutletVoltage.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpAtsOutletCurrent		1.3.6.1.4.1.850.1.1.3.4.3.3.1.1.8
The present output current, in hundredths of amps, of a given outlet. If the current measurement is not supported for an individual receptacle regardless whether device-wide or just for this receptacle, then this value will always return ERROR_NO_SUCH_NAME. Device-wide support for receptacle current measurements is denoted by tlpAtsSupportsCurrentPower.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpAtsOutletPower		1.3.6.1.4.1.850.1.1.3.4.3.3.1.1.9
The output power of a given outlet. If the power measurement is not supported for an individual receptacle regardless whether device-wide or just for this receptacle, then this value will always return ERROR_NO_SUCH_NAME. Device-wide support for receptacle power measurements is denoted by tlpAtsSupportsCurrentPower.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpAtsOutletRampAction		1.3.6.1.4.1.850.1.1.3.4.3.3.1.1.10
The ramp action to take on a given outlet when powering on the device. If this receptacle is not controllable, as denoted by tlpAtsOutletControllable, then this value will always return ERROR_NO_SUCH_NAME.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	remainOff(0), turnOnAfterDelay(1)

tlpAtsOutletRampDelay		1.3.6.1.4.1.850.1.1.3.4.3.3.1.1.11
The number of seconds to delay before powering on the given outlet. If this receptacle is not controllable, as denoted by tlpAtsOutletControllable, then this value will always return ERROR_NO_SUCH_NAME.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32

tlpAtsOutletShedAction		1.3.6.1.4.1.850.1.1.3.4.3.3.1.1.12
The shed action to take on a given outlet when powering off the device. If this receptacle is not controllable, as denoted by tlpAtsOutletControllable, then this value will always return ERROR_NO_SUCH_NAME.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	remainOn(0), turnOffAfterDelay(1)

tlpAtsOutletShedDelay		1.3.6.1.4.1.850.1.1.3.4.3.3.1.1.13
The number of seconds to delay before powering off the given outlet. If this receptacle is not controllable, as denoted by tlpAtsOutletControllable, then this value will always return ERROR_NO_SUCH_NAME.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32

tlpAtsOutletGroup		1.3.6.1.4.1.850.1.1.3.4.3.3.1.1.14
The tlpAtsOutletGroupIndex group index of the respective group to which the given outlet is assigned, or zero (0) if the given outlet is not grouped.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32

tlpAtsOutletBank		1.3.6.1.4.1.850.1.1.3.4.3.3.1.1.15
Indicates on which bank the given outlet is located.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

tlpAtsOutletCircuit		1.3.6.1.4.1.850.1.1.3.4.3.3.1.1.16
Indicates on which circuit the given outlet is wired.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

tlpAtsOutletPhase		1.3.6.1.4.1.850.1.1.3.4.3.3.1.1.17
Indicates on which phase or phases the given outlet is associated. For single phase devices, this object will always return phase1(1). For 3-phase devices with outlets wired to a single phase, this object will return phase1(1), phase2(2) or phase3(3). For 3-phase devices with outlets wired to two phases, this object will return phase1-2(4) for phases 1 and 2, phase2-3(5) for phases 2 and 3, and phase3-1(6) for phases 3 and 1. Devices that do not report phase connections will return unknown(0).
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	unknown(0), phase1(1), phase2(2), phase3(3), phase1-2(4), phase2-3(5), phase3-1(6)

tlpAtsOutletGroupTable		1.3.6.1.4.1.850.1.1.3.4.3.3.2
The receptacle grouping details of each ats in device table. This is a sparse dependent table, and will contain the number of entries based upon the value of tlpAtsIdentNumOutletGroups per each device.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		TlpAtsOutletGroupEntry

tlpAtsOutletGroupEntry		1.3.6.1.4.1.850.1.1.3.4.3.3.2.1
An entry containing information applicable to a particular outlet group managed by this agent.
Status: current	Access: not-accessible
OBJECT-TYPE
	TlpAtsOutletGroupEntry

tlpAtsOutletGroupIndex		1.3.6.1.4.1.850.1.1.3.4.3.3.2.1.1
The table row index for the ats outlet group.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpAtsOutletGroupRowStatus		1.3.6.1.4.1.850.1.1.3.4.3.3.2.1.2
Row status for the tlpAtsOutletGroupTable
Status: current	Access: read-write
OBJECT-TYPE
	RowStatus

tlpAtsOutletGroupName		1.3.6.1.4.1.850.1.1.3.4.3.3.2.1.3
The name of this outlet group.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString

tlpAtsOutletGroupDescription		1.3.6.1.4.1.850.1.1.3.4.3.3.2.1.4
A description for this outlet group.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString

tlpAtsOutletGroupState		1.3.6.1.4.1.850.1.1.3.4.3.3.2.1.5
The current state of the outlet group. This value will report off(1) if all outlets in the group are off, on(2) if all outlets in the group are on, mixed(3) if some outlets in the group are off and others are on, or unknown(0) if the state of the outlets cannot be determined.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	unknown(0), off(1), on(2), mixed(3)

tlpAtsOutletGroupCommand		1.3.6.1.4.1.850.1.1.3.4.3.3.2.1.6
Reading this value will always return 0. Setting this value to turnOff(1) will turn off every outlet associated with the group. Setting this value to turnOn(2) will turn on every outlet associated with the group. Setting this value to cycle(3) will turn off every outlet associated with the group, then turn each outlet back on.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	turnOff(1), turnOn(2), cycle(3)

tlpAtsCircuitTable		1.3.6.1.4.1.850.1.1.3.4.3.4.1
A list of ats circuit table entries. The number of entries is given by the value of tlpAtsIdentNumCircuits.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		TlpAtsCircuitEntry

tlpAtsCircuitEntry		1.3.6.1.4.1.850.1.1.3.4.3.4.1.1
An entry containing information applicable to a particular circuit managed by this agent.
Status: current	Access: not-accessible
OBJECT-TYPE
	TlpAtsCircuitEntry

tlpAtsCircuitIndex		1.3.6.1.4.1.850.1.1.3.4.3.4.1.1.1
The table row index for the ats circuit.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpAtsCircuitPhase		1.3.6.1.4.1.850.1.1.3.4.3.4.1.1.2
Indicates on which phase or phases the given circuit is wired. For single phase devices, this object will always return phase1(1). For 3-phase devices with outlets wired to a single phase, this object will return phase1(1), phase2(2) or phase3(3). For 3-phase devices with outlets wired to two phases, this object will return phase1-2(4) for phases 1 and 2, phase2-3(5) for phases 2 and 3, and phase3-1(6) for phases 3 and 1. Devices that do not report phase connections will return unknown(0).
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	unknown(0), phase1(1), phase2(2), phase3(3), phase1-2(4), phase2-3(5), phase3-1(6)

tlpAtsCircuitInputVoltage		1.3.6.1.4.1.850.1.1.3.4.3.4.1.1.3
The input voltage for a circuit.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

tlpAtsCircuitTotalCurrent		1.3.6.1.4.1.850.1.1.3.4.3.4.1.1.4
The total current for all receptacles in a given circuit.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

tlpAtsCircuitCurrentLimit		1.3.6.1.4.1.850.1.1.3.4.3.4.1.1.5
The current capacity of a circuit in the system limited by the circuit breaker or wiring used in a given unit.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

tlpAtsCircuitCurrentMin		1.3.6.1.4.1.850.1.1.3.4.3.4.1.1.6
The minimum total current for all receptacles in a given circuit since last reset.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

tlpAtsCircuitCurrentMax		1.3.6.1.4.1.850.1.1.3.4.3.4.1.1.7
The maximum total current for all receptacles in a given circuit since last reset.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

tlpAtsCircuitTotalPower		1.3.6.1.4.1.850.1.1.3.4.3.4.1.1.8
The total power for all receptacles in a given circuit.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

tlpAtsCircuitPowerFactor		1.3.6.1.4.1.850.1.1.3.4.3.4.1.1.9
The power factor for all receptacles in a given circuit.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0..200

tlpAtsCircuitUtilization		1.3.6.1.4.1.850.1.1.3.4.3.4.1.1.10
The percentage of utilization of a given circuit. This is typically a calculation of tlpAtsCircuitTotalCurrent / tlpAtsCircuitCurrentLimit.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpAtsBreakerTable		1.3.6.1.4.1.850.1.1.3.4.3.5.1
A list of ats bank breaker table entries. The number of entries is given by the value of tlpAtsIdentNumBreakers.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		TlpAtsBreakerEntry

tlpAtsBreakerEntry		1.3.6.1.4.1.850.1.1.3.4.3.5.1.1
An entry containing information applicable to a particular bank breaker managed by this agent.
Status: current	Access: not-accessible
OBJECT-TYPE
	TlpAtsBreakerEntry

tlpAtsBreakerIndex		1.3.6.1.4.1.850.1.1.3.4.3.5.1.1.1
The table row index for the ats bank breaker.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpAtsBreakerStatus		1.3.6.1.4.1.850.1.1.3.4.3.5.1.1.2
Indicates whether the bank breaker is open(0), closed(1) or not installed(2).
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	open(0), closed(1), notInstalled(2)

tlpAtsHeatsinkTable		1.3.6.1.4.1.850.1.1.3.4.3.6.1
A list of ats heatsink thermistor table entries. The number of entries is given by the value of tlpAtsIdentNumHeatsinks.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		TlpAtsHeatsinkEntry

tlpAtsHeatsinkEntry		1.3.6.1.4.1.850.1.1.3.4.3.6.1.1
An entry containing information applicable to a particular heatsink thermistor managed by this agent.
Status: current	Access: not-accessible
OBJECT-TYPE
	TlpAtsHeatsinkEntry

tlpAtsHeatsinkIndex		1.3.6.1.4.1.850.1.1.3.4.3.6.1.1.1
The table row index for the ats heatsink thermistor.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpAtsHeatsinkStatus		1.3.6.1.4.1.850.1.1.3.4.3.6.1.1.2
Indicates whether the heatsink thermistor is available. The entry will return notAvailable(0) if a thermistor is either non-existent or disconnected, or available(1) when connected.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	notAvailable(0), available(1)

tlpAtsHeatsinkTemperatureC		1.3.6.1.4.1.850.1.1.3.4.3.6.1.1.3
The temperature at the heatsink thermistor in tenths degrees Celsius. Heatsink temperature measurements are not supported on all models. If not supported, this value will always return ERROR_NO_SUCH_NAME.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

tlpAtsHeatsinkTemperatureF		1.3.6.1.4.1.850.1.1.3.4.3.6.1.1.4
The temperature at the heatsink thermistor in tenths degrees Fahrenheit. Heatsink temperature measurements are not supported on all models. If not supported, this value will always return ERROR_NO_SUCH_NAME.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

tlpAtsControlTable		1.3.6.1.4.1.850.1.1.3.4.4.1
The actionable controls for each ats in device table. This is a sparse dependent table, and will contain some subset of devices that are atss.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		TlpAtsControlEntry

tlpAtsControlEntry		1.3.6.1.4.1.850.1.1.3.4.4.1.1
An entry containing controls for a particular ats.
Status: current	Access: not-accessible
OBJECT-TYPE
	TlpAtsControlEntry

tlpAtsControlRamp		1.3.6.1.4.1.850.1.1.3.4.4.1.1.1
Set to TRUE to initiate the pre-designated ramp sequence on the ats.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

tlpAtsControlShed		1.3.6.1.4.1.850.1.1.3.4.4.1.1.2
Set to TRUE to initiate the pre-designated shed sequence on the ats.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

tlpAtsControlAtsOn		1.3.6.1.4.1.850.1.1.3.4.4.1.1.3
Set to TRUE to turn the ats on.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

tlpAtsControlAtsOff		1.3.6.1.4.1.850.1.1.3.4.4.1.1.4
Set to TRUE to turn the ats off.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

tlpAtsControlAtsReboot		1.3.6.1.4.1.850.1.1.3.4.4.1.1.5
Set to TRUE to reboot the ats.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

tlpAtsControlResetGeneralFault		1.3.6.1.4.1.850.1.1.3.4.4.1.1.6
Set to TRUE to reset the general fault alarm indicated by tlpAtsDeviceGeneralFault.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

tlpAtsConfigTable		1.3.6.1.4.1.850.1.1.3.4.5.1
The configuration options of each ats in device table. This is a sparse dependent table, and will contain some subset of devices that are atss. Not all options are available on all atss.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		TlpAtsConfigEntry

tlpAtsConfigEntry		1.3.6.1.4.1.850.1.1.3.4.5.1.1
An entry containing configuration options for a particular ats.
Status: current	Access: not-accessible
OBJECT-TYPE
	TlpAtsConfigEntry

tlpAtsConfigInputVoltage		1.3.6.1.4.1.850.1.1.3.4.5.1.1.1
The nominal value of the input line voltage. This value may not be supported on all models. If not supported, this value will return ERROR_NO_SUCH_NAME. This value may not be writable on all models. If not writable, the value will be rejected and an appropriate error message will be returned.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

tlpAtsConfigSourceSelect		1.3.6.1.4.1.850.1.1.3.4.5.1.1.2
The determination as to which of two AC input lines is designated as the primary input source. The other is designated as the secondary input source. This value will always return inputSourceA(1) for devices with a single input source. Setting this value is supported only on selected models.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	inputSourceA(1), inputSourceB(2)

tlpAtsConfigSource1ReturnTime		1.3.6.1.4.1.850.1.1.3.4.5.1.1.3
The nominal time to delay a transition to Source 1, if it is the preferred source.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

tlpAtsConfigSource2ReturnTime		1.3.6.1.4.1.850.1.1.3.4.5.1.1.4
The nominal time to delay a transition to Source 2, if it is the preferred source.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

tlpAtsConfigAutoRampOnTransition		1.3.6.1.4.1.850.1.1.3.4.5.1.1.5
When enabled(1), the ats should perform its preconfigured ramp sequence when the input source transfers from its designated secondary source to its designated primary source. This value not supported on all ats devices. If not supported, then this value will always return ERROR_NO_SUCH_NAME.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	disabled(0), enabled(1)

tlpAtsConfigAutoShedOnTransition		1.3.6.1.4.1.850.1.1.3.4.5.1.1.6
When enabled(1), the ats should perform its preconfigured shed sequence when the input source transfers from its designated primary source to its designated secondary source. This value not supported on all ats devices. If not supported, then this value will always return ERROR_NO_SUCH_NAME.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	disabled(0), enabled(1)

tlpAtsConfigVoltageRangeOldTable		1.3.6.1.4.1.850.1.1.3.4.5.2
The voltage range options in this table is intended to configure the operating voltages of an ats. This is a sparse dependent table, and will contain some subset of devices that are atss. All voltage points defined in this table are listed in a specific order from high to low. All voltage points must satisfy the conditions and ranges defined for each point. Any point violating any of the relative limits will be rejected. For optimal operation, it is recommended that tlpAtsConfigHighVoltageReset be set lower than tlpAtsConfigHighVoltageTransfer by a margin no less than 1% of tlpAtsConfigHighVoltageTransfer; and that tlpAtsConfigSource1TransferReset (tlpAtsConfigSource2TransferReset) be set higher than tlpAtsConfigSource1BrownoutSet (tlpAtsConfigSource2BrownoutSet) by a margin no less than 1% of tlpAtsConfigSource1BrownoutSet (tlpAtsConfigSource2BrownoutSet). *The upper limit of line voltage is tlpAtsInputHighTransferVoltageUpperBound. The lower limit of line voltage is tlpAtsInputBadTransferVoltageLowerBound. All minimum and maximum limits for each voltage point are all exclusive unless indicated otherwise. This table in its entirety is obsolete and replaced by tlpAtsConfigVoltageRangeTable.
Status: obsolete	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		TlpAtsConfigVoltageRangeOldEntry

tlpAtsConfigVoltageRangeOldEntry		1.3.6.1.4.1.850.1.1.3.4.5.2.1
An entry containing voltage range configuration options for a particular ats.
Status: obsolete	Access: not-accessible
OBJECT-TYPE
	TlpAtsConfigVoltageRangeOldEntry

tlpAtsConfigHighVoltageTransferOld		1.3.6.1.4.1.850.1.1.3.4.5.2.1.1
The maximum line voltage allowed before the unit disconnects the AC input connection. The maximum value allowed is dictated by tlpAtsInputHighTransferVoltageUpperBound (inclusively). The minimum value allowed is dictated by tlpAtsConfigHighVoltageResetOld. This value may not be configurable on all models. If not supported, this value will return ERROR_NO_SUCH_NAME.
Status: obsolete	Access: read-write
OBJECT-TYPE
	Unsigned32

tlpAtsConfigHighVoltageResetOld		1.3.6.1.4.1.850.1.1.3.4.5.2.1.2
If a unit is disconnected due to over-voltage, the line voltage has to fall below this value before the unit re-connects the AC input connection. The maximum value allowed is dictated by tlpAtsConfigHighVoltageTransferOld. The minimum value allowed is dictated by the greater of tlpAtsConfigSource1TransferResetOld and tlpAtsConfigSource2TransferResetOld. If not supported, this value will return ERROR_NO_SUCH_NAME.
Status: obsolete	Access: read-write
OBJECT-TYPE
	Unsigned32

tlpAtsConfigSource1TransferResetOld		1.3.6.1.4.1.850.1.1.3.4.5.2.1.3
If input source 1 voltage level is above this value, a unit connected to source 2 will transition to source 1 (if it is the preferred source). The maximum value allowed is dictated by tlpAtsConfigHighVoltageResetOld. The minimum value allowed is dictated by tlpAtsConfigSource1BrownoutSetOld. If not supported, this value will return ERROR_NO_SUCH_NAME.
Status: obsolete	Access: read-write
OBJECT-TYPE
	Unsigned32

tlpAtsConfigSource1BrownoutSetOld		1.3.6.1.4.1.850.1.1.3.4.5.2.1.4
This value dictates the voltage level below which source 1 goes into a brown out condition. The maximum value allowed is dictated by tlpAtsConfigSource1TransferResetOld. The minimum value allowed is dictated by tlpAtsConfigSource1TransferSetOld. If not supported, this value will return ERROR_NO_SUCH_NAME.
Status: obsolete	Access: read-write
OBJECT-TYPE
	Unsigned32

tlpAtsConfigSource1TransferSetOld		1.3.6.1.4.1.850.1.1.3.4.5.2.1.5
If input source 1 voltage level falls below this value, a unit connected to source 1 will transition to source 2 (if it is in fair condition as denoted by tlpAtsConfigSource2TransferSetOld). The maximum value allowed is dictated by tlpAtsConfigSource1BrownoutSetOld. The minimum value allowed is dictated by tlpAtsConfigLowVoltageResetOld. If not supported, this value will return ERROR_NO_SUCH_NAME.
Status: obsolete	Access: read-write
OBJECT-TYPE
	Unsigned32

tlpAtsConfigSource2TransferResetOld		1.3.6.1.4.1.850.1.1.3.4.5.2.1.6
If input source 2 voltage level is above this value, a unit connected to source 1 will transition to source 2 (if it is the preferred source). The maximum value allowed is dictated by tlpAtsConfigHighVoltageResetOld. The minimum value allowed is dictated by tlpAtsConfigSource2BrownoutSetOld. If not supported, this value will return ERROR_NO_SUCH_NAME.
Status: obsolete	Access: read-write
OBJECT-TYPE
	Unsigned32

tlpAtsConfigSource2BrownoutSetOld		1.3.6.1.4.1.850.1.1.3.4.5.2.1.7
This value dictates the voltage level below which source 2 goes into a brown out condition. The maximum value allowed is dictated by tlpAtsConfigSource2TransferResetOld. The minimum value allowed is dictated by tlpAtsConfigSource2TransferSetOld. If not supported, this value will return ERROR_NO_SUCH_NAME.
Status: obsolete	Access: read-write
OBJECT-TYPE
	Unsigned32

tlpAtsConfigSource2TransferSetOld		1.3.6.1.4.1.850.1.1.3.4.5.2.1.8
If input source 2 voltage level falls below this value, a unit connected to source 2 will transition to source 1 (if it is in fair condition as denoted by tlpAtsConfigSource1TransferSetOld). The maximum value allowed is dictated by tlpAtsConfigSource2BrownoutSetOld. The minimum value allowed is dictated by tlpAtsConfigLowVoltageResetOld. If not supported, this value will return ERROR_NO_SUCH_NAME.
Status: obsolete	Access: read-write
OBJECT-TYPE
	Unsigned32

tlpAtsConfigLowVoltageResetOld		1.3.6.1.4.1.850.1.1.3.4.5.2.1.9
If a unit is disconnected due to under-voltage or is not powered up yet, the line voltage has to rise above this value before the unit gets connected to the AC input connection. The maximum value allowed is dictated by the lesser value of tlpAtsConfigSource1TransferSetOld and tlpAtsConfigSource2TransferSetOld. The minimum value allowed is dictated by tlpAtsConfigLowVoltageTransferOld. If not supported, this value will return ERROR_NO_SUCH_NAME.
Status: obsolete	Access: read-write
OBJECT-TYPE
	Unsigned32

tlpAtsConfigLowVoltageTransferOld		1.3.6.1.4.1.850.1.1.3.4.5.2.1.10
The minimum line voltage allowed before the unit disconnects the AC input connection. The maximum value allowed is dictated by tlpAtsConfigLowVoltageResetOld. The minimum value allowed is dictated by tlpAtsInputBadTransferVoltageLowerBound (inclusively). If not supported, this value will return ERROR_NO_SUCH_NAME.
Status: obsolete	Access: read-write
OBJECT-TYPE
	Unsigned32

tlpAtsConfigVoltageRangeLimitsTable		1.3.6.1.4.1.850.1.1.3.4.5.3
The voltage range table, as documented by tlpAtsConfigVoltageRangeTable requires that all changes adhere with stack order, from high transfer voltage down to low transfer voltage. In addition to stack order, certain voltage range values have limits defining the absolute minimum and absolute maximum for such values. Any voltage value violating any respective limit defined herein will be rejected.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		TlpAtsConfigVoltageRangeLimitsEntry

tlpAtsConfigVoltageRangeLimitsEntry		1.3.6.1.4.1.850.1.1.3.4.5.3.1
An entry containing voltage range limits configuration options for a particular ats.
Status: current	Access: not-accessible
OBJECT-TYPE
	TlpAtsConfigVoltageRangeLimitsEntry

tlpAtsConfigSourceBrownoutSetMinimum		1.3.6.1.4.1.850.1.1.3.4.5.3.1.1
This value dictates the absolute lower limit by which tlpAtsConfigSource1BrownoutSet and tlpAtsConfigSource2BrownoutSet can be set. tlpAtsConfigSource1TransferSet and tlpAtsConfigSource2TransferSet, respectively, are also used when determining the lowest value a brownout value can be set at any given time. If not supported, this value will return ERROR_NO_SUCH_NAME.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

tlpAtsConfigSourceBrownoutSetMaximum		1.3.6.1.4.1.850.1.1.3.4.5.3.1.2
This value dictates the absolute upper limit by which tlpAtsConfigSource1BrownoutSet and tlpAtsConfigSource2BrownoutSet can be set. tlpAtsConfigSource1TransferReset and tlpAtsConfigSource2TransferReset, respectively, are also used when determining the greatest value a brownout value can be set at any given time. If not supported, this value will return ERROR_NO_SUCH_NAME.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

tlpAtsConfigSourceTransferSetMinimum		1.3.6.1.4.1.850.1.1.3.4.5.3.1.3
This value dictates the absolute lower limit by which tlpAtsConfigSource1TransferSet and tlpAtsConfigSource2TransferSet can be set. tlpAtsConfigLowVoltageReset is also used when determining the lowest value a transferset value can be set at any given time. If not supported, this value will return ERROR_NO_SUCH_NAME.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

tlpAtsConfigSourceTransferSetMaximum		1.3.6.1.4.1.850.1.1.3.4.5.3.1.4
This value dictates the absolute upper limit by which tlpAtsConfigSource1TransferSet and tlpAtsConfigSource2TransferSet can be set. tlpAtsConfigSource1BrownoutSet and tlpAtsConfigSource2BrownoutSet, respectively, are also used when determining the greatest value a transferset value can be set at any given time. If not supported, this value will return ERROR_NO_SUCH_NAME.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

tlpAtsConfigThresholdTable		1.3.6.1.4.1.850.1.1.3.4.5.4
The configurable threshold options of each ats in device table. This is a sparse dependent table, and will contain some subset of devices that are atss. Not all options are available on all atss.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		TlpAtsConfigThresholdEntry

tlpAtsConfigThresholdEntry		1.3.6.1.4.1.850.1.1.3.4.5.4.1
An entry containing configurable threshold options for a particular ats.
Status: current	Access: not-accessible
OBJECT-TYPE
	TlpAtsConfigThresholdEntry

tlpAtsConfigOutputCurrentThreshold		1.3.6.1.4.1.850.1.1.3.4.5.4.1.1
The output current measurement at which an over current condition is reported. This value may not be supported on all models. If not supported, this value will return ERROR_NO_SUCH_NAME.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

tlpAtsConfigOverTemperatureThreshold		1.3.6.1.4.1.850.1.1.3.4.5.4.1.2
The system temperature at which an over temperature condition is reported. This value may not be supported on all models. If not supported, this value will return ERROR_NO_SUCH_NAME.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

tlpAtsConfigOverVoltageThreshold		1.3.6.1.4.1.850.1.1.3.4.5.4.1.3
The input voltage measurement at which an over voltage condition is reported. This value may not be supported on all models. If not supported, this value will return ERROR_NO_SUCH_NAME.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

tlpAtsConfigOverLoadThreshold		1.3.6.1.4.1.850.1.1.3.4.5.4.1.4
The system load at which an overload condition is reported. This value may not be supported on all models. If not supported, this value will return ERROR_NO_SUCH_NAME.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

tlpAtsConfigVoltageRangeTable		1.3.6.1.4.1.850.1.1.3.4.5.5
The voltage range options in this table is intended to configure the operating voltages of an ats. This is a sparse dependent table, and will contain some subset of devices that are atss. All voltage points defined in this table are listed in a specific order from high to low. All voltage points must satisfy the conditions and ranges defined for each point. Any point violating any of the relative limits will be rejected. For optimal operation, it is recommended that tlpAtsConfigHighVoltageReset be set lower than tlpAtsConfigHighVoltageTransfer by a margin no less than 1% of tlpAtsConfigHighVoltageTransfer; and that tlpAtsConfigSource1TransferReset (tlpAtsConfigSource2TransferReset) be set higher than tlpAtsConfigSource1BrownoutSet (tlpAtsConfigSource2BrownoutSet) by a margin no less than 1% of tlpAtsConfigSource1BrownoutSet (tlpAtsConfigSource2BrownoutSet). *The upper limit of line voltage is tlpAtsInputHighTransferVoltageUpperBound. The lower limit of line voltage is tlpAtsInputBadTransferVoltageLowerBound. All minimum and maximum limits for each voltage point are all exclusive unless indicated otherwise.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		TlpAtsConfigVoltageRangeEntry

tlpAtsConfigVoltageRangeEntry		1.3.6.1.4.1.850.1.1.3.4.5.5.1
An entry containing voltage range configuration options for a particular ats.
Status: current	Access: not-accessible
OBJECT-TYPE
	TlpAtsConfigVoltageRangeEntry

tlpAtsConfigHighVoltageTransfer		1.3.6.1.4.1.850.1.1.3.4.5.5.1.1
The maximum line voltage allowed on the input source before the unit disconnects the AC input connection. tlpAtsConfigHighVoltageTransfer is the same value for both input sources on some units. On such units, changing this value on one source will change the value on the other source. The maximum value allowed is dictated by tlpAtsInputHighTransferVoltageUpperBound (inclusively). The minimum value allowed is dictated by tlpAtsConfigHighVoltageReset. This value may not be configurable on all models. If not supported, this value will return ERROR_NO_SUCH_NAME.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

tlpAtsConfigHighVoltageReset		1.3.6.1.4.1.850.1.1.3.4.5.5.1.2
If an input connection is disconnected due to over-voltage, the line voltage on the input source has to fall below this value before the unit re-connects the AC input connection for the input source. tlpAtsConfigHighVoltageReset is the same value for both input sources on some units. On such units, changing this value on one source will change the value on the other source. The maximum value allowed is dictated by tlpAtsConfigHighVoltageTransfer. On units where this is the same value for both sources, the minimum value allowed is dictated by the greater of tlpAtsConfigTransferReset.1 and tlpAtsConfigTransferReset.2. On units where the value is distinct for each source, the minimum value allowed is dictated solely by this source's tlpAtsConfigTransferReset. If not supported, this value will return ERROR_NO_SUCH_NAME.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

tlpAtsConfigTransferReset		1.3.6.1.4.1.850.1.1.3.4.5.5.1.3
If input source voltage level is above this value, a unit connected to this other input source will transition to this input source (if it is the preferred source). The maximum value allowed is dictated by tlpAtsConfigHighVoltageReset. The minimum value allowed is dictated by tlpAtsConfigBrownoutSet. If not supported, this value will return ERROR_NO_SUCH_NAME.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

tlpAtsConfigBrownoutSet		1.3.6.1.4.1.850.1.1.3.4.5.5.1.4
This value dictates the voltage level below which the input source goes into a brown out condition. The maximum value allowed is dictated by tlpAtsConfigTransferReset. The minimum value allowed is dictated by tlpAtsConfigTransferSet. If not supported, this value will return ERROR_NO_SUCH_NAME.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

tlpAtsConfigTransferSet		1.3.6.1.4.1.850.1.1.3.4.5.5.1.5
If input source voltage level falls below this value, a unit connected to this input source will transition to other input source (if it is in fair condition as denoted by tlpAtsConfigTransferSet). The maximum value allowed is dictated by tlpAtsConfigBrownoutSet. The minimum value allowed is dictated by tlpAtsConfigLowVoltageReset. If not supported, this value will return ERROR_NO_SUCH_NAME.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

tlpAtsConfigLowVoltageReset		1.3.6.1.4.1.850.1.1.3.4.5.5.1.6
If a unit is disconnected due to under-voltage or is not powered up yet, the line voltage has to rise above this value before the unit gets connected to the AC input connection. tlpAtsConfigLowVoltageReset is the same value for both input sources. As such, changing this value on one source will change the value on the other source. The maximum value allowed is dictated by the lesser value of tlpAtsConfigTransferSet.1 and tlpAtsConfigTransferSet.2. The minimum value allowed is dictated by tlpAtsConfigLowVoltageTransfer. If not supported, this value will return ERROR_NO_SUCH_NAME.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

tlpAtsConfigLowVoltageTransfer		1.3.6.1.4.1.850.1.1.3.4.5.5.1.7
The minimum line voltage allowed before the unit disconnects the AC input connection. tlpAtsConfigLowVoltageTransfer is the same value for both input sources. As such, changing this value on one source will change the value on the other source. The maximum value allowed is dictated by tlpAtsConfigLowVoltageReset. The minimum value allowed is dictated by tlpAtsInputBadTransferVoltageLowerBound (inclusively). If not supported, this value will return ERROR_NO_SUCH_NAME.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

tlpAtsConfigPhaseThresholdTable		1.3.6.1.4.1.850.1.1.3.4.5.6
The configuration options of each Ats in device table. This is a sparse dependent table, and will contain some subset of devices that are Atss. Not all options are available on all Atss.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		TlpAtsConfigPhaseThresholdEntry

tlpAtsConfigPhaseThresholdEntry		1.3.6.1.4.1.850.1.1.3.4.5.6.1
An entry containing threshold configuration options for a particular Ats.
Status: current	Access: not-accessible
OBJECT-TYPE
	TlpAtsConfigPhaseThresholdEntry

tlpAtsPhaseIndex		1.3.6.1.4.1.850.1.1.3.4.5.6.1.1
The table row index for the Ats phase.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpAtsConfigOutputCurrentThresholdTolerance		1.3.6.1.4.1.850.1.1.3.4.5.6.1.2
The threshold tolerance value used together with output current high/low threshold to evaluate output current high/low condition.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

tlpAtsConfigOutputCurrentHighThreshold		1.3.6.1.4.1.850.1.1.3.4.5.6.1.3
The value at which a output current high condition is declared.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

tlpAtsConfigOutputCurrentLowThreshold		1.3.6.1.4.1.850.1.1.3.4.5.6.1.4
The value at which a output current low condition is declared.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

tlpCoolingIdentNumCooling		1.3.6.1.4.1.850.1.1.3.5.1.1
The number of cooling devices that this agent is currently managing.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpCoolingCurrentTable		1.3.6.1.4.1.850.1.1.3.5.3.3
The input current for each cooling device in device table. This is a sparse dependent table, and will contain the number of entries based upon the number of cooling device managed by the agent as reported by tlpCoolingIdentNumCooling.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		TlpCoolingCurrentEntry

tlpCoolingCurrentEntry		1.3.6.1.4.1.850.1.1.3.5.3.3.1
An entry containing input current for a particular cooling device.
Status: current	Access: not-accessible
OBJECT-TYPE
	TlpCoolingCurrentEntry

tlpCoolingUnitCurrent		1.3.6.1.4.1.850.1.1.3.5.3.3.1.1
The total current draw of the unit in tenths of Amps. If not supported, this value will always return ERROR_NO_SUCH_NAME.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpCoolingCompressorCurrent		1.3.6.1.4.1.850.1.1.3.5.3.3.1.2
The compressor current draw of the unit in tenths of Amps. If not supported, this value will always return ERROR_NO_SUCH_NAME.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpCoolingEvaporatorFanCurrent		1.3.6.1.4.1.850.1.1.3.5.3.3.1.3
The current draw of the evaporator fan in tenths of Amps. If not supported, this value will always return ERROR_NO_SUCH_NAME.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpCoolingCondenserFanCurrent		1.3.6.1.4.1.850.1.1.3.5.3.3.1.4
The current draw of the condenser fan in tenths of Amps. If not supported, this value will always return ERROR_NO_SUCH_NAME.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpCoolingTemperatureFahrenheitTable		1.3.6.1.4.1.850.1.1.3.5.3.1.1
The temperature details for each cooling device in device table. This is a sparse dependent table, and will contain the number of entries based upon the number of cooling device managed by the agent as reported by tlpCoolingIdentNumCooling.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		TlpCoolingTemperatureFahrenheitEntry

tlpCoolingTemperatureFahrenheitEntry		1.3.6.1.4.1.850.1.1.3.5.3.1.1.1
An entry containing temperature details for a particular cooling device.
Status: current	Access: not-accessible
OBJECT-TYPE
	TlpCoolingTemperatureFahrenheitEntry

tlpCoolingAmbientDegF		1.3.6.1.4.1.850.1.1.3.5.3.1.1.1.1
The ambient temperature in tenths degrees Fahrenheit. If not supported, this value will always return ERROR_NO_SUCH_NAME.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

tlpCoolingSupplyAirDegF		1.3.6.1.4.1.850.1.1.3.5.3.1.1.1.2
The temperature of the air entering the cooling unit in tenths degrees Fahrenheit. If not supported, this value will always return ERROR_NO_SUCH_NAME.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

tlpCoolingReturnAirDegF		1.3.6.1.4.1.850.1.1.3.5.3.1.1.1.3
The temperature of the air entering the cooling unit in tenths degrees Fahrenheit. If not supported, this value will always return ERROR_NO_SUCH_NAME.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

tlpCoolingCondenserInletDegF		1.3.6.1.4.1.850.1.1.3.5.3.1.1.1.4
The temperature of the air entering the condenser in tenths degrees Fahrenheit. If not supported, this value will always return ERROR_NO_SUCH_NAME.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

tlpCoolingEvaporatorDegF		1.3.6.1.4.1.850.1.1.3.5.3.1.1.1.5
The temperature of the evaporator surface in tenths degrees Fahrenheit. If not supported, this value will always return ERROR_NO_SUCH_NAME.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

tlpCoolingSuctionDegF		1.3.6.1.4.1.850.1.1.3.5.3.1.1.1.6
The temperature of the low pressure refrigerant line in tenths degrees Fahrenheit. If not supported, this value will always return ERROR_NO_SUCH_NAME.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

tlpCoolingRemoteDegF		1.3.6.1.4.1.850.1.1.3.5.3.1.1.1.7
The external remote temperature in tenths degrees Fahrenheit. If not supported, this value will always return ERROR_NO_SUCH_NAME.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

tlpCoolingCondenserOutletDegF		1.3.6.1.4.1.850.1.1.3.5.3.1.1.1.8
The temperature of the air leaving the condenser in tenths degrees Fahrenheit. If not supported, this value will always return ERROR_NO_SUCH_NAME.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

tlpCoolingTemperatureCelsiusTable		1.3.6.1.4.1.850.1.1.3.5.3.1.2
The temperature details for each cooling device in device table. This is a sparse dependent table, and will contain the number of entries based upon the number of cooling device managed by the agent as reported by tlpCoolingIdentNumCooling.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		TlpCoolingTemperatureCelsiusEntry

tlpCoolingTemperatureCelsiusEntry		1.3.6.1.4.1.850.1.1.3.5.3.1.2.1
An entry containing temperature details for a particular cooling device.
Status: current	Access: not-accessible
OBJECT-TYPE
	TlpCoolingTemperatureCelsiusEntry

tlpCoolingAmbientDegC		1.3.6.1.4.1.850.1.1.3.5.3.1.2.1.1
The ambient temperature in tenths degrees Celsius. If not supported, this value will always return ERROR_NO_SUCH_NAME.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

tlpCoolingSupplyAirDegC		1.3.6.1.4.1.850.1.1.3.5.3.1.2.1.2
The temperature of the air entering the cooling unit in tenths degrees Celsius. If not supported, this value will always return ERROR_NO_SUCH_NAME.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

tlpCoolingReturnAirDegC		1.3.6.1.4.1.850.1.1.3.5.3.1.2.1.3
The temperature of the air entering the cooling unit in tenths degrees Celsius. If not supported, this value will always return ERROR_NO_SUCH_NAME.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

tlpCoolingCondenserInletDegC		1.3.6.1.4.1.850.1.1.3.5.3.1.2.1.4
The temperature of the air entering the condenser in tenths degrees Celsius. If not supported, this value will always return ERROR_NO_SUCH_NAME.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

tlpCoolingEvaporatorDegC		1.3.6.1.4.1.850.1.1.3.5.3.1.2.1.5
The temperature of the evaporator surface in tenths degrees Celsius. If not supported, this value will always return ERROR_NO_SUCH_NAME.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

tlpCoolingSuctionDegC		1.3.6.1.4.1.850.1.1.3.5.3.1.2.1.6
The temperature of the low pressure refrigerant line in tenths degrees Celsius. If not supported, this value will always return ERROR_NO_SUCH_NAME.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

tlpCoolingRemoteDegC		1.3.6.1.4.1.850.1.1.3.5.3.1.2.1.7
The external remote temperature in tenths degrees Celsius. If not supported, this value will always return ERROR_NO_SUCH_NAME.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

tlpCoolingCondenserOutletDegC		1.3.6.1.4.1.850.1.1.3.5.3.1.2.1.8
The temperature of the air leaving the condenser in tenths degrees Celsius. If not supported, this value will always return ERROR_NO_SUCH_NAME.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

tlpCoolingPressureMpaTable		1.3.6.1.4.1.850.1.1.3.5.3.2.1
The pressure detail for each cooling device in device table. This is a sparse dependent table, and will contain the number of entries based upon the number of cooling device managed by the agent as reported by tlpCoolingIdentNumCooling.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		TlpCoolingPressureMpaEntry

tlpCoolingPressureMpaEntry		1.3.6.1.4.1.850.1.1.3.5.3.2.1.1
An entry containing pressure details for a particular cooling device.
Status: current	Access: not-accessible
OBJECT-TYPE
	TlpCoolingPressureMpaEntry

tlpCoolingSuctionPressureMpa		1.3.6.1.4.1.850.1.1.3.5.3.2.1.1.1
The pressure of the compressor discharge line in tenths of Mpa. If not supported, this value will always return ERROR_NO_SUCH_NAME.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpCoolingDischargePressureMpa		1.3.6.1.4.1.850.1.1.3.5.3.2.1.1.2
The pressure of the compressor discharge line in tenths of Mpa. If not supported, this value will always return ERROR_NO_SUCH_NAME.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpCoolingPressurePsiTable		1.3.6.1.4.1.850.1.1.3.5.3.2.2
The pressure detail for each cooling device in device table. This is a sparse dependent table, and will contain the number of entries based upon the number of cooling device managed by the agent as reported by tlpCoolingIdentNumCooling.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		TlpCoolingPressurePsiEntry

tlpCoolingPressurePsiEntry		1.3.6.1.4.1.850.1.1.3.5.3.2.2.1
An entry containing pressure details for a particular cooling device.
Status: current	Access: not-accessible
OBJECT-TYPE
	TlpCoolingPressurePsiEntry

tlpCoolingSuctionPressurePsi		1.3.6.1.4.1.850.1.1.3.5.3.2.2.1.1
The pressure of the compressor discharge line in tenths of Psi. If not supported, this value will always return ERROR_NO_SUCH_NAME.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpCoolingDischargePressurePsi		1.3.6.1.4.1.850.1.1.3.5.3.2.2.1.2
The pressure of the compressor discharge line in tenths of Psi. If not supported, this value will always return ERROR_NO_SUCH_NAME.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpCoolingDynamicTable		1.3.6.1.4.1.850.1.1.3.5.3.4
The dynamic detail for each cooling device in device table. This is a sparse dependent table, and will contain the number of entries based upon the number of cooling device managed by the agent as reported by tlpCoolingIdentNumCooling.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		TlpCoolingDynamicEntry

tlpCoolingDynamicEntry		1.3.6.1.4.1.850.1.1.3.5.3.4.1
An entry dynamic details for a particular cooling device.
Status: current	Access: not-accessible
OBJECT-TYPE
	TlpCoolingDynamicEntry

tlpCoolingEvaporatorFanSpeed		1.3.6.1.4.1.850.1.1.3.5.3.4.1.1
The current speed of the evaporator fan. If not supported, this value will always return ERROR_NO_SUCH_NAME.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	off(0), low(1), mediumLow(2), medium(3), mediumHigh(4), high(5), auto(6)

tlpCoolingCondenserFanSpeed		1.3.6.1.4.1.850.1.1.3.5.3.4.1.2
The current speed of the condenser fan. If not supported, this value will always return ERROR_NO_SUCH_NAME.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	off(0), low(1), mediumLow(2), medium(3), mediumHigh(4), high(5), auto(6)

tlpCoolingCompressorFrequency		1.3.6.1.4.1.850.1.1.3.5.3.4.1.3
The operating mechanical frequency(Hz) of the compressor. If not supported, this value will always return ERROR_NO_SUCH_NAME.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpCoolingEEVSteps		1.3.6.1.4.1.850.1.1.3.5.3.4.1.4
The current EEV steps. If not supported, this value will always return ERROR_NO_SUCH_NAME.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

tlpCoolingRuntimeTable		1.3.6.1.4.1.850.1.1.3.5.3.5
The runtime detail for each cooling device in device table. This is a sparse dependent table, and will contain the number of entries based upon the number of cooling device managed by the agent as reported by tlpCoolingIdentNumCooling.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		TlpCoolingRuntimeEntry

tlpCoolingRuntimeEntry		1.3.6.1.4.1.850.1.1.3.5.3.5.1
An entry containing runtime for a particular cooling device.
Status: current	Access: not-accessible
OBJECT-TYPE
	TlpCoolingRuntimeEntry

tlpCoolingCompressorRunDays		1.3.6.1.4.1.850.1.1.3.5.3.5.1.1
Total days the compressor has been under operation. If not supported, this value will always return ERROR_NO_SUCH_NAME.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpCoolingCondensatePumpRunDays		1.3.6.1.4.1.850.1.1.3.5.3.5.1.2
Total days the condensate pump has been under operation. If not supported, this value will always return ERROR_NO_SUCH_NAME.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpCoolingAirFilterRunHours		1.3.6.1.4.1.850.1.1.3.5.3.5.1.3
Total hours the air filter has been under operation. If not supported, this value will always return ERROR_NO_SUCH_NAME.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpCoolingEvaporatorFanRunDays		1.3.6.1.4.1.850.1.1.3.5.3.5.1.4
Total days the evaporator fan has been under operation. If not supported, this value will always return ERROR_NO_SUCH_NAME.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpCoolingCondenserFanRunDays		1.3.6.1.4.1.850.1.1.3.5.3.5.1.5
Total days the condenser fan has been under operation. If not supported, this value will always return ERROR_NO_SUCH_NAME.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpCoolingAtomizerRunDays		1.3.6.1.4.1.850.1.1.3.5.3.5.1.6
Total days the atomizer has been under operation. If not supported, this value will always return ERROR_NO_SUCH_NAME.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpCoolingStatusTable		1.3.6.1.4.1.850.1.1.3.5.3.6
The status detail for each cooling device in device table. This is a sparse dependent table, and will contain the number of entries based upon the number of cooling device managed by the agent as reported by tlpCoolingIdentNumCooling.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		TlpCoolingStatusEntry

tlpCoolingStatusEntry		1.3.6.1.4.1.850.1.1.3.5.3.6.1
An entry containing status for a particular cooling device.
Status: current	Access: not-accessible
OBJECT-TYPE
	TlpCoolingStatusEntry

tlpCoolingOperatingMode		1.3.6.1.4.1.850.1.1.3.5.3.6.1.1
The current operating mode. If not supported, this value will always return ERROR_NO_SUCH_NAME.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	off(0), idle(1), cooling(2), shuttingDown(3), dehumidifying(4), defrosting(5), notConnected(6)

tlpCoolingCoolOutput		1.3.6.1.4.1.850.1.1.3.5.3.6.1.2
The current cooling output of the cooling device in tenth of kilowatt. If not supported, this value will always return ERROR_NO_SUCH_NAME.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpCoolingAlarmStatus		1.3.6.1.4.1.850.1.1.3.5.3.6.1.3
The current alarm status of the cooling device. If not supported, this value will always return ERROR_NO_SUCH_NAME.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	noAlarm(0), warning(1), critical(2)

tlpCoolingCompressorStatus		1.3.6.1.4.1.850.1.1.3.5.3.6.1.4
The current operating status of compressor. If not supported, this value will always return ERROR_NO_SUCH_NAME.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	off(0), on(1)

tlpCoolingWaterStatus		1.3.6.1.4.1.850.1.1.3.5.3.6.1.5
The current water status of cooling unit. If not supported, this value will always return ERROR_NO_SUCH_NAME.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	notFull(0), full(1)

tlpCoolingControlTable		1.3.6.1.4.1.850.1.1.3.5.4.1
The actionable controls for each cooling device in device table. This is a sparse dependent table, and will contain some subset of devices that are cooling device.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		TlpCoolingControlEntry

tlpCoolingControlEntry		1.3.6.1.4.1.850.1.1.3.5.4.1.1
An entry containing controls for a particular cooling device.
Status: current	Access: not-accessible
OBJECT-TYPE
	TlpCoolingControlEntry

tlpCoolingOnOff		1.3.6.1.4.1.850.1.1.3.5.4.1.1.1
Turn the unit on or off.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	turnOffUnit(0), turnOnUnit(1)

tlpCoolingConfigTable		1.3.6.1.4.1.850.1.1.3.5.5.1
The configuration details for each each cooling device in device table. This is a sparse dependent table, and will contain some subset of devices that are cooling device. Not all options are available on all cooling devices.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		TlpCoolingConfigEntry

tlpCoolingConfigEntry		1.3.6.1.4.1.850.1.1.3.5.5.1.1
An entry configuration details for a particular cooling device.
Status: current	Access: not-accessible
OBJECT-TYPE
	TlpCoolingConfigEntry

tlpCoolingAutoStart		1.3.6.1.4.1.850.1.1.3.5.5.1.1.1
Specifies if the unit should start automatically on power up. If not supported, this value will always return ERROR_NO_SUCH_NAME.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	disabled(0), enabled(1)

tlpCoolingFanSpeed		1.3.6.1.4.1.850.1.1.3.5.5.1.1.2
Specifies the actual speed of the evaporator fan. Setting the fan speed to auto(6) will enable tlpCoolingAutoFanSpeed; however, on most units getting the fan speed will return the actual fan speed regardless whether auto fan speed is enabled or disabled. The value auto(6) is returned only on units that do not report the actual fan speed when auto fan speed is enabled. Not all values are supported on all cooling units. Invalid values will return an appropriate error when accessed. If not supported, this value will always return ERROR_NO_SUCH_NAME
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	off(0), low(1), mediumLow(2), medium(3), mediumHigh(4), high(5), auto(6)

tlpCoolingControlType		1.3.6.1.4.1.850.1.1.3.5.5.1.1.3
Specifies which temperature is used as a control point. If not supported, this value will always return ERROR_NO_SUCH_NAME.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	returnAirTemperature(0), remoteTemperature(1)

tlpCoolingDisplayUnits		1.3.6.1.4.1.850.1.1.3.5.5.1.1.4
Specifies whether displays output values in Metric or English formats. If not supported, this value will always return ERROR_NO_SUCH_NAME.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	metric(0), english(1)

tlpCoolingBeepOnKey		1.3.6.1.4.1.850.1.1.3.5.5.1.1.5
Specifies whether a beep is emitted when a key is pressed on the unit's display panel. If not supported, this value will always return ERROR_NO_SUCH_NAME.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	noBeep(0), beepOn(1)

tlpCoolingInputContactType		1.3.6.1.4.1.850.1.1.3.5.5.1.1.6
The input contact type. If not supported, this value will always return ERROR_NO_SUCH_NAME.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	normallyClosed(0), normallyOpen(1)

tlpCoolingOutputContactType		1.3.6.1.4.1.850.1.1.3.5.5.1.1.7
The output contact type. If not supported, this value will always return ERROR_NO_SUCH_NAME.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	normallyClosed(0), normallyOpen(1)

tlpCoolingOutputRelaySource		1.3.6.1.4.1.850.1.1.3.5.5.1.1.8
The alarm level that causes the output relay to activate. If not supported, this value will always return ERROR_NO_SUCH_NAME.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	disabled(0), allAlarmsAndWarnings(1), criticalAlarmsOnly(2)

tlpCoolingOutputRelayDefault		1.3.6.1.4.1.850.1.1.3.5.5.1.1.9
Type of contact to make when output relay is activated. If not supported, this value will always return ERROR_NO_SUCH_NAME.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	normallyClosed(0), normallyOpen(1)

tlpCoolingOffOnInputContact		1.3.6.1.4.1.850.1.1.3.5.5.1.1.10
Indicates if the unit should stop cooling when input contact is activated. If not supported, this value will always return ERROR_NO_SUCH_NAME.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	turnOff(0), alarmOnly(1)

tlpCoolingOffOnLeak		1.3.6.1.4.1.850.1.1.3.5.5.1.1.11
Indicates if the unit should stop cooling when leak input is activated. If not supported, this value will always return ERROR_NO_SUCH_NAME.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	turnOff(0), alarmOnly(1)

tlpCoolingWaterLeakContactType		1.3.6.1.4.1.850.1.1.3.5.5.1.1.12
The water leak contact type. If not supported, this value will always return ERROR_NO_SUCH_NAME.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	normallyClosed(0), normallyOpen(1)

tlpCoolingAirFilterInterval		1.3.6.1.4.1.850.1.1.3.5.5.1.1.13
The number of weeks before the air filter needs to be changed. If not supported, this value will always return ERROR_NO_SUCH_NAME.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

tlpCoolingAirFilterAlarm		1.3.6.1.4.1.850.1.1.3.5.5.1.1.14
When enabled, an alarm should occur when the maximum number of air filter run hours has been exceeded. If not supported, this value will always return ERROR_NO_SUCH_NAME.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	disabled(0), enabled(1)

tlpCoolingMaxAirFilterRunHours		1.3.6.1.4.1.850.1.1.3.5.5.1.1.15
The maximum interval for air filter run hours before warning is annunciated. If not supported, this value will always return ERROR_NO_SUCH_NAME.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

tlpCoolingStartTimer		1.3.6.1.4.1.850.1.1.3.5.5.1.1.16
The unit will start operate after the specified timer elapsed. If not supported, this value will always return ERROR_NO_SUCH_NAME.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

tlpCoolingStopTimer		1.3.6.1.4.1.850.1.1.3.5.5.1.1.17
The unit will switch to standby mode after the specified timer elapsed. If not supported, this value will always return ERROR_NO_SUCH_NAME.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

tlpCoolingEnergyMode		1.3.6.1.4.1.850.1.1.3.5.5.1.1.18
This option enables or disables the energy saving mode. If not supported, this value will always return ERROR_NO_SUCH_NAME.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	normalCooling(0), energySaving(1)

tlpCoolingDefrostMode		1.3.6.1.4.1.850.1.1.3.5.5.1.1.19
This option enables or disables the defrost mode. If not supported, this value will always return ERROR_NO_SUCH_NAME.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	disabled(0), enabled(1)

tlpCoolingRemoteTemperatureSensor		1.3.6.1.4.1.850.1.1.3.5.5.1.1.20
This option enables or disables the remote temperature sensor. If not supported, this value will always return ERROR_NO_SUCH_NAME.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	disabled(0), enabled(1)

tlpCoolingDehumidifyingMode		1.3.6.1.4.1.850.1.1.3.5.5.1.1.21
This option enables or disables the dehumidifying mode. If not supported, this value will always return ERROR_NO_SUCH_NAME.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	disabled(0), enabled(1)

tlpCoolingFanAlwaysOn		1.3.6.1.4.1.850.1.1.3.5.5.1.1.22
This option enables or disables the fan always on. If not supported, this value will always return ERROR_NO_SUCH_NAME.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	disabled(0), enabled(1)

tlpCoolingQuietMode		1.3.6.1.4.1.850.1.1.3.5.5.1.1.23
This option enables or disables the quiet mode. If not supported, this value will always return ERROR_NO_SUCH_NAME.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	disabled(0), enabled(1)

tlpCoolingHotGasBypass		1.3.6.1.4.1.850.1.1.3.5.5.1.1.24
This option enables or disables the hot gas bypass. If not supported, this value will always return ERROR_NO_SUCH_NAME.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	disabled(0), enabled(1)

tlpCoolingAutoFanSpeed		1.3.6.1.4.1.850.1.1.3.5.5.1.1.25
This option enables or disables the auto fan speed. If not supported, this value will always return ERROR_NO_SUCH_NAME.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	disabled(0), enabled(1)

tlpCoolingConfigTemperatureFahrenheitTable		1.3.6.1.4.1.850.1.1.3.5.5.2
The configuration details for each each cooling device in device table. This is a sparse dependent table, and will contain some subset of devices that are cooling device. Not all options are available on all cooling devices.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		TlpCoolingConfigTemperatureFahrenheitEntry

tlpCoolingConfigTemperatureFahrenheitEntry		1.3.6.1.4.1.850.1.1.3.5.5.2.1
An entry configuration details for a particular cooling device.
Status: current	Access: not-accessible
OBJECT-TYPE
	TlpCoolingConfigTemperatureFahrenheitEntry

tlpCoolingSetPointDegF		1.3.6.1.4.1.850.1.1.3.5.5.2.1.1
The set point temperature the unit will control the temperature in tenths degrees Fahrenheit. If not supported, this value will always return ERROR_NO_SUCH_NAME.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32

tlpCoolingSupplyAirHighLimitDegF		1.3.6.1.4.1.850.1.1.3.5.5.2.1.2
Maximum allowed supply air temperature in tenths degrees Fahrenheit before firing an alarm. If not supported, this value will always return ERROR_NO_SUCH_NAME.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32

tlpCoolingSupplyAirLowLimitDegF		1.3.6.1.4.1.850.1.1.3.5.5.2.1.3
Minimum allowed supply air temperature in tenths degrees Fahrenheit before firing an alarm. If not supported, this value will always return ERROR_NO_SUCH_NAME.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32

tlpCoolingMaxDeviationLimitDegF		1.3.6.1.4.1.850.1.1.3.5.5.2.1.4
Maximum allowed air temperature deviation from set temperature before firing an alarm. If not supported, this value will always return ERROR_NO_SUCH_NAME.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32

tlpCoolingReturnAirHighLimitDegF		1.3.6.1.4.1.850.1.1.3.5.5.2.1.5
Maximum allowed supply air temperature in tenths degrees Fahrenheit before firing an alarm. If not supported, this value will always return ERROR_NO_SUCH_NAME.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32

tlpCoolingReturnAirLowLimitDegF		1.3.6.1.4.1.850.1.1.3.5.5.2.1.6
Minimum allowed supply air temperature in tenths degrees Fahrenheit before firing an alarm. If not supported, this value will always return ERROR_NO_SUCH_NAME.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32

tlpCoolingRemoteSetPointDegF		1.3.6.1.4.1.850.1.1.3.5.5.2.1.7
The remote set point temperature the unit will control the temperature in tenths degrees Fahrenheit. If not supported, this value will always return ERROR_NO_SUCH_NAME.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32

tlpCoolingConfigTemperatureCelsiusTable		1.3.6.1.4.1.850.1.1.3.5.5.3
The configuration details for each cooling device in device table. This is a sparse dependent table, and will contain some subset of devices that are cooling device. Not all options are available on all cooling devices.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		TlpCoolingConfigTemperatureCelsiusEntry

tlpCoolingConfigTemperatureCelsiusEntry		1.3.6.1.4.1.850.1.1.3.5.5.3.1
An entry configuration details for a particular cooling device.
Status: current	Access: not-accessible
OBJECT-TYPE
	TlpCoolingConfigTemperatureCelsiusEntry

tlpCoolingSetPointDegC		1.3.6.1.4.1.850.1.1.3.5.5.3.1.1
The set point temperature the unit will control the temperature in tenths degrees Celsius. If not supported, this value will always return ERROR_NO_SUCH_NAME.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32

tlpCoolingSupplyAirHighLimitDegC		1.3.6.1.4.1.850.1.1.3.5.5.3.1.2
Maximum allowed supply air temperature in tenths degrees Celsius before firing an alarm. If not supported, this value will always return ERROR_NO_SUCH_NAME.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32

tlpCoolingSupplyAirLowLimitDegC		1.3.6.1.4.1.850.1.1.3.5.5.3.1.3
Minimum allowed supply air temperature in tenths degrees Celsius before firing an alarm. If not supported, this value will always return ERROR_NO_SUCH_NAME.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32

tlpCoolingMaxDeviationLimitDegC		1.3.6.1.4.1.850.1.1.3.5.5.3.1.4
Maximum allowed air temperature deviation from set temperature before firing an alarm. If not supported, this value will always return ERROR_NO_SUCH_NAME.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32

tlpCoolingReturnAirHighLimitDegC		1.3.6.1.4.1.850.1.1.3.5.5.3.1.5
Maximum allowed return air temperature in tenths degrees Celsius before firing an alarm. If not supported, this value will always return ERROR_NO_SUCH_NAME.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32

tlpCoolingReturnAirLowLimitDegC		1.3.6.1.4.1.850.1.1.3.5.5.3.1.6
Minimum allowed return air temperature in tenths degrees Celsius before firing an alarm. If not supported, this value will always return ERROR_NO_SUCH_NAME.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32

tlpCoolingRemoteSetPointDegC		1.3.6.1.4.1.850.1.1.3.5.5.3.1.7
The remote set point temperature the unit will control the temperature in tenths degrees Celsius. If not supported, this value will always return ERROR_NO_SUCH_NAME.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32

tlpKvmIdentNumKvm		1.3.6.1.4.1.850.1.1.3.6.1.1
The number of kvm devices that this agent is currently managing.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpRackTrackIdentNumRackTrack		1.3.6.1.4.1.850.1.1.3.7.1.1
The number of rack track devices that this agent is currently managing.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpSwitchIdentNumSwitch		1.3.6.1.4.1.850.1.1.3.8.1.1
The number of switch devices that this agent is currently managing.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpAgentType		1.3.6.1.4.1.850.1.2.1.1.1
The type of PowerAlert engine providing this data.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	unknown(0), pal(1), pansa(2), delta(3), sinetica(4), netos6(5), netos7(6), panms(7), nmc5(8)

tlpAgentVersion		1.3.6.1.4.1.850.1.2.1.1.2
The version of the agent software.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

tlpAgentDriverVersion		1.3.6.1.4.1.850.1.2.1.1.3
The driver version of the agent software.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

tlpAgentMAC		1.3.6.1.4.1.850.1.2.1.1.4
The MAC Address of the agent.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

tlpAgentSerialNum		1.3.6.1.4.1.850.1.2.1.1.5
Serial number of the web card providing the agent data. This value is only supported by a web card agent. PowerAlert for PC (PAL) agents do not support this value and will return ERROR_NO_SUCH_NAME.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

tlpAgentUuid		1.3.6.1.4.1.850.1.2.1.1.6
Universally unique identifier for this host in the form 8-4-4-4-12 for a total of 36 characters (32 alphanumeric characters and four hyphens). For example: 550e8400-e29b-41d4-a716-446655440000.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

tlpAgentAttributesSupports		1.3.6.1.4.1.850.1.2.1.2.1
OBJECT IDENTIFIER

tlpAgentAttributesSupportsHTTP		1.3.6.1.4.1.850.1.2.1.2.1.1
Indicates whether the agent supports HTTP connections.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

tlpAgentAttributesSupportsHTTPS		1.3.6.1.4.1.850.1.2.1.2.1.2
Indicates whether the agent supports HTTPS connections.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

tlpAgentAttributesSupportsFTP		1.3.6.1.4.1.850.1.2.1.2.1.3
Indicates whether the agent supports FTP connections.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

tlpAgentAttributesSupportsTelnetMenu		1.3.6.1.4.1.850.1.2.1.2.1.4
Indicates whether the agent supports Telnet menu connections.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

tlpAgentAttributesSupportsTelnetCLI		1.3.6.1.4.1.850.1.2.1.2.1.5
Indicates whether the agent supports Telnet CLI connections.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

tlpAgentAttributesSupportsSSHMenu		1.3.6.1.4.1.850.1.2.1.2.1.6
Indicates whether the agent supports SSH menu connections.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

tlpAgentAttributesSupportsSSHCLI		1.3.6.1.4.1.850.1.2.1.2.1.7
Indicates whether the agent supports SSH CLI connections.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

tlpAgentAttributesSupportsSNMP		1.3.6.1.4.1.850.1.2.1.2.1.8
Indicates whether the agent supports SNMP connections.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

tlpAgentAttributesSupportsSNMPTrap		1.3.6.1.4.1.850.1.2.1.2.1.9
Indicates whether the agent supports listening for SNMP traps. This is only applicable for network monitoring applications, PowerAlert Shutdown Agent for an example, that connect to a web card or PowerAlert Local and listen for outbound traps. As such, this value is not supported and will always return 2(false) for a web card or PowerAlert Local.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

tlpAgentAttributesAutostart		1.3.6.1.4.1.850.1.2.1.2.2
OBJECT IDENTIFIER

tlpAgentAttributesAutostartHTTP		1.3.6.1.4.1.850.1.2.1.2.2.1
Indicates whether the agent autostarts HTTP services.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

tlpAgentAttributesAutostartHTTPS		1.3.6.1.4.1.850.1.2.1.2.2.2
Indicates whether the agent autostarts HTTPS services.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

tlpAgentAttributesAutostartFTP		1.3.6.1.4.1.850.1.2.1.2.2.3
Indicates whether the agent autostarts FTP services.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

tlpAgentAttributesAutostartTelnetMenu		1.3.6.1.4.1.850.1.2.1.2.2.4
Indicates whether the agent autostarts Telnet menu services.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

tlpAgentAttributesAutostartTelnetCLI		1.3.6.1.4.1.850.1.2.1.2.2.5
Indicates whether the agent autostarts Telnet CLI services.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

tlpAgentAttributesAutostartSSHMenu		1.3.6.1.4.1.850.1.2.1.2.2.6
Indicates whether the agent autostarts SSH menu services.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

tlpAgentAttributesAutostartSSHCLI		1.3.6.1.4.1.850.1.2.1.2.2.7
Indicates whether the agent autostarts SSH CLI services.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

tlpAgentAttributesAutostartSNMP		1.3.6.1.4.1.850.1.2.1.2.2.8
Indicates whether the agent autostarts SNMP services.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

tlpAgentAttributesSnmp		1.3.6.1.4.1.850.1.2.1.2.3
OBJECT IDENTIFIER

tlpAgentAttributesSNMPv1Enabled		1.3.6.1.4.1.850.1.2.1.2.3.1
Indicates whether the agent will allow SNMPv1 connections.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

tlpAgentAttributesSNMPv2cEnabled		1.3.6.1.4.1.850.1.2.1.2.3.2
Indicates whether the agent will allow SNMPv2c connections.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

tlpAgentAttributesSNMPv3Enabled		1.3.6.1.4.1.850.1.2.1.2.3.3
Indicates whether the agent will allow SNMPv3 connections.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

tlpAgentAttributesPorts		1.3.6.1.4.1.850.1.2.1.2.4
OBJECT IDENTIFIER

tlpAgentAttributesHTTPPort		1.3.6.1.4.1.850.1.2.1.2.4.1
The port used for HTTP communications.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpAgentAttributesHTTPSPort		1.3.6.1.4.1.850.1.2.1.2.4.2
The port used for HTTPS communications.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpAgentAttributesFTPPort		1.3.6.1.4.1.850.1.2.1.2.4.3
The port used for FTP communications.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpAgentAttributesTelnetMenuPort		1.3.6.1.4.1.850.1.2.1.2.4.4
The port used for Telnet Menu communications.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpAgentAttributesTelnetCLIPort		1.3.6.1.4.1.850.1.2.1.2.4.5
The port used for Telnet CLI communications.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpAgentAttributesSSHMenuPort		1.3.6.1.4.1.850.1.2.1.2.4.6
The port used for SSH Menu communications.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpAgentAttributesSSHCLIPort		1.3.6.1.4.1.850.1.2.1.2.4.7
The port used for SSH CLI communications.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpAgentAttributesSNMPPort		1.3.6.1.4.1.850.1.2.1.2.4.8
The port used for SNMP communications.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpAgentAttributesSNMPTrapPort		1.3.6.1.4.1.850.1.2.1.2.4.9
The port used for SNMP trap and notifications.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpAgentConfigRemoteRegistration		1.3.6.1.4.1.850.1.2.2.1.1
Registers an SNMP contact's IP address and the port on which the contact is listening for SNMP traps. Setting this value is used to CREATE a table entry in a non-standard way. Getting this value will return a string INADDR_ANY and any port number. The port number should always be included. When unregistering an SNMP contact, the requester's IP address should be provided with a port number of 0. When setting or unsetting this OID, the IP address string should never be 0 nor should it be empty. The registration uses its default community string to register each contact. To use a community other than the default, then it must be appended to the end of the string delimited with a comma. The address should be of the format 0.0.0.0:00000 for IPv4. If IPv6 is supported, use the bracket-enclosed format given in IETF RFC 2732 Section 2, with the following examples: [FEDC:BA98:7654:3210:FEDC:BA98:7654:3210]:80 [1080:0:0:0:8:800:200C:417A]:162 [3ffe:2a00:100:7031::1]:162 [1080::8:800:200C:417A]:162,myCommunity [::192.9.5.5]:162,myCommunity [::FFFF:129.144.52.38]:80 [2010:836B:4179::836B:4179]:162
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString

tlpAgentConfigCurrentTime		1.3.6.1.4.1.850.1.2.2.1.2
The current date and time of the system.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString

tlpAgentNumEmailContacts		1.3.6.1.4.1.850.1.2.3.1.1
The number of email contacts currently defined in the agent.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpAgentEmailContactTable		1.3.6.1.4.1.850.1.2.3.1.2
A list of email contact entries. The number of entries is given by the value of tlpAgentNumEmailContacts.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		TlpAgentEmailContactEntry

tlpAgentEmailContactEntry		1.3.6.1.4.1.850.1.2.3.1.2.1
An entry containing the details of an email contact.
Status: current	Access: not-accessible
OBJECT-TYPE
	TlpAgentEmailContactEntry

tlpAgentEmailContactIndex		1.3.6.1.4.1.850.1.2.3.1.2.1.1
The table row index for the email contact.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpAgentEmailContactRowStatus		1.3.6.1.4.1.850.1.2.3.1.2.1.2
Row status for the tlpAgentEmailContactTable.
Status: current	Access: read-write
OBJECT-TYPE
	RowStatus

tlpAgentEmailContactName		1.3.6.1.4.1.850.1.2.3.1.2.1.3
The name of the email contact.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString

tlpAgentEmailContactAddress		1.3.6.1.4.1.850.1.2.3.1.2.1.4
The address of the email contact.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString

tlpAgentNumSnmpContacts		1.3.6.1.4.1.850.1.2.3.2.1
The number of SNMP contacts currently defined in the agent.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpAgentSnmpContactTable		1.3.6.1.4.1.850.1.2.3.2.2
A list of SNMP contact entries. The number of entries is given by the value of tlpAgentNumSnmpContacts.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		TlpAgentSnmpContactEntry

tlpAgentSnmpContactEntry		1.3.6.1.4.1.850.1.2.3.2.2.1
An entry containing the details of an SNMP contact.
Status: current	Access: not-accessible
OBJECT-TYPE
	TlpAgentSnmpContactEntry

tlpAgentSnmpContactIndex		1.3.6.1.4.1.850.1.2.3.2.2.1.1
The table row index for the SNMP contact.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpAgentSnmpContactRowStatus		1.3.6.1.4.1.850.1.2.3.2.2.1.2
Row status for the tlpAgentSnmpContactTable.
Status: current	Access: read-write
OBJECT-TYPE
	RowStatus

tlpAgentSnmpContactName		1.3.6.1.4.1.850.1.2.3.2.2.1.3
The name of the SNMP contact.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString

tlpAgentSnmpContactIpAddress		1.3.6.1.4.1.850.1.2.3.2.2.1.4
The IP address of the SNMP contact.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString

tlpAgentSnmpContactPort		1.3.6.1.4.1.850.1.2.3.2.2.1.5
The port of the SNMP contact.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

tlpAgentSnmpContactSnmpVersion		1.3.6.1.4.1.850.1.2.3.2.2.1.6
The SNMP contact version to use for sending traps.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	snmpv1(1), snmpv2c(2), snmpv3(3)

tlpAgentSnmpContactSecurityName		1.3.6.1.4.1.850.1.2.3.2.2.1.7
The security name for the SNMP contact.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString

tlpAgentSnmpContactPrivPassword		1.3.6.1.4.1.850.1.2.3.2.2.1.8
The privacy password to use for sending V3 traps to the SNMP contact.
Status: obsolete	Access: read-write
OBJECT-TYPE
	DisplayString

tlpAgentSnmpContactAuthPassword		1.3.6.1.4.1.850.1.2.3.2.2.1.9
The authentication password to use for sending V3 traps to the SNMP contact.
Status: obsolete	Access: read-write
OBJECT-TYPE
	DisplayString

tlpAlarmsPresent		1.3.6.1.4.1.850.1.3.1
The present number of active alarm conditions.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpAlarmTable		1.3.6.1.4.1.850.1.3.2
A list of alarm conditions for all devices managed by this agent. This table contains zero, one, or many rows at any moment, depending upon the number of alarm conditions in effect or conditions not acknowledged. The agent creates a row in the table each time a condition is detected and deletes that row when that condition no longer pertains (becomes inactive and is acknowledged). The agent creates the first row with tlpAlarmId equal to 1, and increments the value of tlpAlarmId each time a new row is created, wrapping to the first free value greater than or equal to 1 when the maximum value of tlpAlarmId would otherwise be exceeded. Consequently, after multiple operations, the table may become sparse (e.g., containing entries for rows 95, 100, 101, and 203) and the entries should not be assumed to be in chronological order because tlpAlarmId might have wrapped. The number of rows in the table at any given time is reflected by the value of tlpAlarmsPresent.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		TlpDeviceAlarmEntry

tlpAlarmEntry		1.3.6.1.4.1.850.1.3.2.1
An entry containing information application to a particular alarm.
Status: current	Access: not-accessible
OBJECT-TYPE
	TlpDeviceAlarmEntry

tlpAlarmId		1.3.6.1.4.1.850.1.3.2.1.1
A unique identifier for an alarm condition. This value will remain constant for the duration of the alarm condition.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpAlarmDescr		1.3.6.1.4.1.850.1.3.2.1.2
A reference of the alarm description object. The object referenced should not be accessible, but rather be used to provide a unique description for the alarm condition. The object referenced will be a well known alarm object associated with the device on which the alarm condition is active.
Status: current	Access: read-only
OBJECT-TYPE
	OBJECT IDENTIFIER

tlpAlarmTime		1.3.6.1.4.1.850.1.3.2.1.3
The value of sysUpTime when the alarm condition was detected. If the alarm condition was detected at the time of agent startup and presumably existed before agent startup, the value of tlpAlarmsTime shall equal 0.
Status: current	Access: read-only
OBJECT-TYPE
	TimeStamp

tlpAlarmTableRef		1.3.6.1.4.1.850.1.3.2.1.4
This value references the OID of a table object applicable to the alarm condition. This, in conjunction with the table row as defined by tlpAlarmTableRowRef, specifies the object/row within this table to which the alarm condition applies. Example 1 -- The following sample values will be returned for a UPS on battery: tlpAlarmId 28 tlpAlarmDescr tlpUpsAlarmOnBattery tlpAlarmTime 12345678 tlpAlarmTableRef tlpDeviceTable tlpAlarmTableRowRef tlpDeviceIndex.2 tlpAlarmDetail On Battery tlpAlarmType warning tlpAlarmState active tlpAlarmAcknowledged notAcknowledged In the above example, tlpAlarmTableRef references the device table and tlpAlarmTableRowRef references the 2nd managed device in that table. Example 2 -- The following sample values will be returned for a PDU with a load turned off: tlpAlarmId 46 tlpAlarmDescr tlpPduAlarmLoadOff tlpAlarmTime 12345678 tlpAlarmTableRef tlpPduOutletTable tlpAlarmTableRowRef tlpOutletIndex.1.4 tlpAlarmDetail Load Off tlpAlarmType warning tlpAlarmState active tlpAlarmAcknowledged acknowledged In the above example, tlpAlarmTableRef references the pdu outlet table and tlpAlarmTableRowRef references the 4th outlet on the 1st managed device.
Status: current	Access: read-only
OBJECT-TYPE
	OBJECT IDENTIFIER

tlpAlarmTableRowRef		1.3.6.1.4.1.850.1.3.2.1.5
This value is used in conjunction with tlpAlarmTableRef to define the object associated with this alarm condition. See the description of tlpAlarmTableRef for more information.
Status: current	Access: read-only
OBJECT-TYPE
	OBJECT IDENTIFIER

tlpAlarmDetail		1.3.6.1.4.1.850.1.3.2.1.6
A textual description of the alarm condition.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

tlpAlarmType		1.3.6.1.4.1.850.1.3.2.1.7
The category/group of this alarm.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	critical(1), warning(2), info(3), status(4), offline(5), custom(6)

tlpAlarmState		1.3.6.1.4.1.850.1.3.2.1.8
The current state of this alarm condition. An active(1) alarm is a condition that currently exists. An inactive(2) alarm is a condition that no longer exists because the alarm either cleared or was resolved. Each alarm condition must be cleared and acknowledged before it is removed from this table (see tlpAlarmAcknowledged).
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	active(1), inactive(2)

tlpAlarmAcknowledged		1.3.6.1.4.1.850.1.3.2.1.9
Denotes whether the alarm condition has been acknowledged. The agent will return notAcknowledged(1) if the condition has not been acknowledged, or acknowledged(2) when acknowledged. Writing the value acknowledged(2) for an alarm acknowledges the alarm condition. Each alarm condition must be cleared and acknowledged before it is removed from this table; therefore, even if acknowledged, the alarm will remain in this table until the alarm becomes inactive as denoted by tlpAlarmState.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	notAcknowledged(1), acknowledged(2)

tlpAlarmCommunicationsLost		1.3.6.1.4.1.850.1.3.3.2.1
A problem has been encountered in the communications between the agent and the device.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpAlarmUserDefined		1.3.6.1.4.1.850.1.3.3.2.2
OBJECT IDENTIFIER

tlpAlarmUserDefined01		1.3.6.1.4.1.850.1.3.3.2.2.1
User-defined event 1 is in alarm.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpAlarmUserDefined02		1.3.6.1.4.1.850.1.3.3.2.2.2
User-defined event 2 is in alarm.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpAlarmUserDefined03		1.3.6.1.4.1.850.1.3.3.2.2.3
User-defined event 3 is in alarm.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpAlarmUserDefined04		1.3.6.1.4.1.850.1.3.3.2.2.4
User-defined event 4 is in alarm.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpAlarmUserDefined05		1.3.6.1.4.1.850.1.3.3.2.2.5
User-defined event 5 is in alarm.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpAlarmUserDefined06		1.3.6.1.4.1.850.1.3.3.2.2.6
User-defined event 6 is in alarm.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpAlarmUserDefined07		1.3.6.1.4.1.850.1.3.3.2.2.7
User-defined event 7 is in alarm.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpAlarmUserDefined08		1.3.6.1.4.1.850.1.3.3.2.2.8
User-defined event 8 is in alarm.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpAlarmUserDefined09		1.3.6.1.4.1.850.1.3.3.2.2.9
User-defined event 9 is in alarm.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpAlarmInternalFirmwareError		1.3.6.1.4.1.850.1.3.3.2.3
A problem has been encountered with the device firmware.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpUpsAlarmBatteryBad		1.3.6.1.4.1.850.1.3.3.3.1
One or more batteries have been determined to require replacement.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpUpsAlarmOnBattery		1.3.6.1.4.1.850.1.3.3.3.2
The UPS is drawing power from the batteries.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpUpsAlarmLowBattery		1.3.6.1.4.1.850.1.3.3.3.3
The remaining battery charge is less than or equal to the percentage of capacity warning specified by tlpUpsConfigBatteryCapacityThreshold.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpUpsAlarmDepletedBattery		1.3.6.1.4.1.850.1.3.3.3.4
The UPS will be unable to sustain the present load when and if the utility power is lost.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpUpsAlarmTempBad		1.3.6.1.4.1.850.1.3.3.3.5
A temperature is out of tolerance.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpUpsAlarmInputBad		1.3.6.1.4.1.850.1.3.3.3.6
An input condition is out of tolerance.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpUpsAlarmOutputBad		1.3.6.1.4.1.850.1.3.3.3.7
An output condition (other than OutputOverload) is out of tolerance.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpUpsAlarmOutputOverload		1.3.6.1.4.1.850.1.3.3.3.8
The output load exceeds the UPS output capacity.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpUpsAlarmOnBypass		1.3.6.1.4.1.850.1.3.3.3.9
The Bypass is presently engaged on the UPS.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpUpsAlarmBypassBad		1.3.6.1.4.1.850.1.3.3.3.10
The Bypass is out of tolerance.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpUpsAlarmOutputOffAsRequested		1.3.6.1.4.1.850.1.3.3.3.11
The UPS has shutdown as requested, i.e., the output is off.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpUpsAlarmUpsOffAsRequested		1.3.6.1.4.1.850.1.3.3.3.12
The entire UPS has shutdown as commanded.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpUpsAlarmChargerFailed		1.3.6.1.4.1.850.1.3.3.3.13
An uncorrected problem has been detected within the UPS charger subsystem.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpUpsAlarmUpsOutputOff		1.3.6.1.4.1.850.1.3.3.3.14
The output of the UPS is in the off state.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpUpsAlarmUpsSystemOff		1.3.6.1.4.1.850.1.3.3.3.15
The UPS system is in the off state.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpUpsAlarmFanFailure		1.3.6.1.4.1.850.1.3.3.3.16
The failure of one or more fans in the UPS has been detected.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpUpsAlarmFuseFailure		1.3.6.1.4.1.850.1.3.3.3.17
The failure of one or more fuses has been detected.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpUpsAlarmGeneralFault		1.3.6.1.4.1.850.1.3.3.3.18
A general fault in the UPS has been detected.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpUpsAlarmDiagnosticTestFailed		1.3.6.1.4.1.850.1.3.3.3.19
The result of the last diagnostic test indicates a failure.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpUpsAlarmAwaitingPower		1.3.6.1.4.1.850.1.3.3.3.20
The UPS output is off and the UPS is awaiting the return of input power.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpUpsAlarmShutdownPending		1.3.6.1.4.1.850.1.3.3.3.21
A tlpUpsShutdownAfterDelay countdown is underway.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpUpsAlarmShutdownImminent		1.3.6.1.4.1.850.1.3.3.3.22
The UPS will turn off power to the load in less than 5 seconds; this may be either a timed shutdown or a low battery shutdown.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpUpsAlarmLoadLevelAboveThreshold		1.3.6.1.4.1.850.1.3.3.3.23
OBJECT IDENTIFIER

tlpUpsAlarmLoadLevelAboveThresholdTotal		1.3.6.1.4.1.850.1.3.3.3.23.1
The total load level is above the designated threshold.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpUpsAlarmLoadLevelAboveThresholdPhase1		1.3.6.1.4.1.850.1.3.3.3.23.2
The load level on phase 1 exceeds load limits.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpUpsAlarmLoadLevelAboveThresholdPhase2		1.3.6.1.4.1.850.1.3.3.3.23.3
The load level on phase 2 exceeds load limits.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpUpsAlarmLoadLevelAboveThresholdPhase3		1.3.6.1.4.1.850.1.3.3.3.23.4
The load level on phase 3 exceeds load limits.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpUpsAlarmOutputCurrentChanged		1.3.6.1.4.1.850.1.3.3.3.24
The output current changed from its last known value.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpUpsAlarmBatteryAgeAboveThreshold		1.3.6.1.4.1.850.1.3.3.3.25
One or more batteries have been determined to require replacement.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpUpsAlarmLoadOff		1.3.6.1.4.1.850.1.3.3.3.26
OBJECT IDENTIFIER

tlpUpsAlarmLoadOff01		1.3.6.1.4.1.850.1.3.3.3.26.1
Load 1 is off.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpUpsAlarmLoadOff02		1.3.6.1.4.1.850.1.3.3.3.26.2
Load 2 is off.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpUpsAlarmLoadOff03		1.3.6.1.4.1.850.1.3.3.3.26.3
Load 3 is off.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpUpsAlarmLoadOff04		1.3.6.1.4.1.850.1.3.3.3.26.4
Load 4 is off.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpUpsAlarmLoadOff05		1.3.6.1.4.1.850.1.3.3.3.26.5
Load 5 is off.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpUpsAlarmLoadOff06		1.3.6.1.4.1.850.1.3.3.3.26.6
Load 6 is off.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpUpsAlarmLoadOff07		1.3.6.1.4.1.850.1.3.3.3.26.7
Load 7 is off.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpUpsAlarmLoadOff08		1.3.6.1.4.1.850.1.3.3.3.26.8
Load 8 is off.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpUpsAlarmLoadOff09		1.3.6.1.4.1.850.1.3.3.3.26.9
Load 9 is off.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpUpsAlarmLoadOff10		1.3.6.1.4.1.850.1.3.3.3.26.10
Load 10 is off.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpUpsAlarmLoadOff11		1.3.6.1.4.1.850.1.3.3.3.26.11
Load 11 is off.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpUpsAlarmLoadOff12		1.3.6.1.4.1.850.1.3.3.3.26.12
Load 12 is off.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpUpsAlarmLoadOff13		1.3.6.1.4.1.850.1.3.3.3.26.13
Load 13 is off.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpUpsAlarmLoadOff14		1.3.6.1.4.1.850.1.3.3.3.26.14
Load 14 is off.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpUpsAlarmLoadOff15		1.3.6.1.4.1.850.1.3.3.3.26.15
Load 15 is off.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpUpsAlarmLoadOff16		1.3.6.1.4.1.850.1.3.3.3.26.16
Load 16 is off.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpUpsAlarmLoadOff17		1.3.6.1.4.1.850.1.3.3.3.26.17
Load 17 is off.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpUpsAlarmLoadOff18		1.3.6.1.4.1.850.1.3.3.3.26.18
Load 18 is off.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpUpsAlarmLoadOff19		1.3.6.1.4.1.850.1.3.3.3.26.19
Load 19 is off.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpUpsAlarmLoadOff20		1.3.6.1.4.1.850.1.3.3.3.26.20
Load 20 is off.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpUpsAlarmLoadOff21		1.3.6.1.4.1.850.1.3.3.3.26.21
Load 21 is off.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpUpsAlarmLoadOff22		1.3.6.1.4.1.850.1.3.3.3.26.22
Load 22 is off.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpUpsAlarmLoadOff23		1.3.6.1.4.1.850.1.3.3.3.26.23
Load 23 is off.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpUpsAlarmLoadOff24		1.3.6.1.4.1.850.1.3.3.3.26.24
Load 24 is off.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpUpsAlarmLoadOff25		1.3.6.1.4.1.850.1.3.3.3.26.25
Load 25 is off.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpUpsAlarmLoadOff26		1.3.6.1.4.1.850.1.3.3.3.26.26
Load 26 is off.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpUpsAlarmLoadOff27		1.3.6.1.4.1.850.1.3.3.3.26.27
Load 27 is off.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpUpsAlarmLoadOff28		1.3.6.1.4.1.850.1.3.3.3.26.28
Load 28 is off.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpUpsAlarmLoadOff29		1.3.6.1.4.1.850.1.3.3.3.26.29
Load 29 is off.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpUpsAlarmLoadOff30		1.3.6.1.4.1.850.1.3.3.3.26.30
Load 30 is off.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpUpsAlarmLoadOff31		1.3.6.1.4.1.850.1.3.3.3.26.31
Load 31 is off.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpUpsAlarmLoadOff32		1.3.6.1.4.1.850.1.3.3.3.26.32
Load 32 is off.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpUpsAlarmLoadOff33		1.3.6.1.4.1.850.1.3.3.3.26.33
Load 33 is off.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpUpsAlarmLoadOff34		1.3.6.1.4.1.850.1.3.3.3.26.34
Load 34 is off.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpUpsAlarmLoadOff35		1.3.6.1.4.1.850.1.3.3.3.26.35
Load 35 is off.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpUpsAlarmLoadOff36		1.3.6.1.4.1.850.1.3.3.3.26.36
Load 36 is off.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpUpsAlarmLoadOff37		1.3.6.1.4.1.850.1.3.3.3.26.37
Load 37 is off.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpUpsAlarmLoadOff38		1.3.6.1.4.1.850.1.3.3.3.26.38
Load 38 is off.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpUpsAlarmLoadOff39		1.3.6.1.4.1.850.1.3.3.3.26.39
Load 39 is off.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpUpsAlarmLoadOff40		1.3.6.1.4.1.850.1.3.3.3.26.40
Load 40 is off.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpUpsAlarmCurrentAboveThreshold		1.3.6.1.4.1.850.1.3.3.3.27
OBJECT IDENTIFIER

tlpUpsAlarmCurrentAboveThreshold1		1.3.6.1.4.1.850.1.3.3.3.27.1
The output current on phase 1 exceeds load limits.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpUpsAlarmCurrentAboveThreshold2		1.3.6.1.4.1.850.1.3.3.3.27.2
The output current on phase 2 exceeds load limits.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpUpsAlarmCurrentAboveThreshold3		1.3.6.1.4.1.850.1.3.3.3.27.3
The output current on phase 3 exceeds load limits.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpUpsAlarmRuntimeBelowWarningLevel		1.3.6.1.4.1.850.1.3.3.3.28
The battery seconds remaining is below warning level.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpUpsAlarmBusStartVoltageLow		1.3.6.1.4.1.850.1.3.3.3.29
The inverter start up bus voltage is too low.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpUpsAlarmBusOverVoltage		1.3.6.1.4.1.850.1.3.3.3.30
The inverter bus voltage is too high.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpUpsAlarmBusUnderVoltage		1.3.6.1.4.1.850.1.3.3.3.31
The inverter bus voltage is too low.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpUpsAlarmBusVoltageUnbalanced		1.3.6.1.4.1.850.1.3.3.3.32
The inverter bus voltage is not balanced.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpUpsAlarmInverterSoftStartBad		1.3.6.1.4.1.850.1.3.3.3.33
The inverter bus voltage cannot reach desired voltage within a specified duration.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpUpsAlarmInverterOverVoltage		1.3.6.1.4.1.850.1.3.3.3.34
The inverter voltage is too high.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpUpsAlarmInverterUnderVoltage		1.3.6.1.4.1.850.1.3.3.3.35
The inverter voltage is too low.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpUpsAlarmInverterCircuitBad		1.3.6.1.4.1.850.1.3.3.3.36
The inverter output is shorted.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpUpsAlarmBatteryOverVoltage		1.3.6.1.4.1.850.1.3.3.3.37
The battery voltage is too high.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpUpsAlarmBatteryUnderVoltage		1.3.6.1.4.1.850.1.3.3.3.38
The battery voltage is too low.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpUpsAlarmSiteWiringFault		1.3.6.1.4.1.850.1.3.3.3.39
The utility input wiring is faulty.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpUpsAlarmOverTemperatureProtection		1.3.6.1.4.1.850.1.3.3.3.40
The over temperature protection is activated.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpUpsAlarmOverCharged		1.3.6.1.4.1.850.1.3.3.3.41
The UPS is over charged.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpUpsAlarmEPOActive		1.3.6.1.4.1.850.1.3.3.3.42
The EPO is currently activated.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpUpsAlarmBypassFrequencyBad		1.3.6.1.4.1.850.1.3.3.3.43
The bypass frequency is out of tolerance.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpUpsAlarmExternalSmartBatteryAgeAboveThreshold		1.3.6.1.4.1.850.1.3.3.3.44
One or more external smart batteries have been determined to require replacement.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpUpsAlarmExternalNonSmartBatteryAgeAboveThreshold		1.3.6.1.4.1.850.1.3.3.3.45
One or more external non-smart batteries have been determined to require replacement.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpUpsAlarmSmartBatteryCommLost		1.3.6.1.4.1.850.1.3.3.3.46
Communications with the smart batteries was lost.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpUpsAlarmLoadsNotAllOn		1.3.6.1.4.1.850.1.3.3.3.47
One of more loads are not on.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpPduAlarmLoadLevelAboveThreshold		1.3.6.1.4.1.850.1.3.3.4.1
The load level is above the designated threshold.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpPduAlarmInputBad		1.3.6.1.4.1.850.1.3.3.4.2
An input condition is out of tolerance.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpPduAlarmOutputBad		1.3.6.1.4.1.850.1.3.3.4.3
An output condition (other than OutputOverload) is out of tolerance.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpPduAlarmOutputOverload		1.3.6.1.4.1.850.1.3.3.4.4
The output load exceeds the pdu output capacity.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpPduAlarmOutputOff		1.3.6.1.4.1.850.1.3.3.4.5
The output of the pdu is in the off state.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpPduAlarmLoadOff		1.3.6.1.4.1.850.1.3.3.4.6
OBJECT IDENTIFIER

tlpPduAlarmLoadOff01		1.3.6.1.4.1.850.1.3.3.4.6.1
Load 1 is off.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpPduAlarmLoadOff02		1.3.6.1.4.1.850.1.3.3.4.6.2
Load 2 is off.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpPduAlarmLoadOff03		1.3.6.1.4.1.850.1.3.3.4.6.3
Load 3 is off.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpPduAlarmLoadOff04		1.3.6.1.4.1.850.1.3.3.4.6.4
Load 4 is off.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpPduAlarmLoadOff05		1.3.6.1.4.1.850.1.3.3.4.6.5
Load 5 is off.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpPduAlarmLoadOff06		1.3.6.1.4.1.850.1.3.3.4.6.6
Load 6 is off.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpPduAlarmLoadOff07		1.3.6.1.4.1.850.1.3.3.4.6.7
Load 7 is off.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpPduAlarmLoadOff08		1.3.6.1.4.1.850.1.3.3.4.6.8
Load 8 is off.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpPduAlarmLoadOff09		1.3.6.1.4.1.850.1.3.3.4.6.9
Load 9 is off.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpPduAlarmLoadOff10		1.3.6.1.4.1.850.1.3.3.4.6.10
Load 10 is off.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpPduAlarmLoadOff11		1.3.6.1.4.1.850.1.3.3.4.6.11
Load 11 is off.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpPduAlarmLoadOff12		1.3.6.1.4.1.850.1.3.3.4.6.12
Load 12 is off.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpPduAlarmLoadOff13		1.3.6.1.4.1.850.1.3.3.4.6.13
Load 13 is off.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpPduAlarmLoadOff14		1.3.6.1.4.1.850.1.3.3.4.6.14
Load 14 is off.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpPduAlarmLoadOff15		1.3.6.1.4.1.850.1.3.3.4.6.15
Load 15 is off.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpPduAlarmLoadOff16		1.3.6.1.4.1.850.1.3.3.4.6.16
Load 16 is off.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpPduAlarmLoadOff17		1.3.6.1.4.1.850.1.3.3.4.6.17
Load 17 is off.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpPduAlarmLoadOff18		1.3.6.1.4.1.850.1.3.3.4.6.18
Load 18 is off.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpPduAlarmLoadOff19		1.3.6.1.4.1.850.1.3.3.4.6.19
Load 19 is off.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpPduAlarmLoadOff20		1.3.6.1.4.1.850.1.3.3.4.6.20
Load 20 is off.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpPduAlarmLoadOff21		1.3.6.1.4.1.850.1.3.3.4.6.21
Load 21 is off.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpPduAlarmLoadOff22		1.3.6.1.4.1.850.1.3.3.4.6.22
Load 22 is off.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpPduAlarmLoadOff23		1.3.6.1.4.1.850.1.3.3.4.6.23
Load 23 is off.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpPduAlarmLoadOff24		1.3.6.1.4.1.850.1.3.3.4.6.24
Load 24 is off.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpPduAlarmLoadOff25		1.3.6.1.4.1.850.1.3.3.4.6.25
Load 25 is off.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpPduAlarmLoadOff26		1.3.6.1.4.1.850.1.3.3.4.6.26
Load 26 is off.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpPduAlarmLoadOff27		1.3.6.1.4.1.850.1.3.3.4.6.27
Load 27 is off.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpPduAlarmLoadOff28		1.3.6.1.4.1.850.1.3.3.4.6.28
Load 28 is off.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpPduAlarmLoadOff29		1.3.6.1.4.1.850.1.3.3.4.6.29
Load 29 is off.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpPduAlarmLoadOff30		1.3.6.1.4.1.850.1.3.3.4.6.30
Load 30 is off.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpPduAlarmLoadOff31		1.3.6.1.4.1.850.1.3.3.4.6.31
Load 31 is off.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpPduAlarmLoadOff32		1.3.6.1.4.1.850.1.3.3.4.6.32
Load 32 is off.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpPduAlarmLoadOff33		1.3.6.1.4.1.850.1.3.3.4.6.33
Load 33 is off.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpPduAlarmLoadOff34		1.3.6.1.4.1.850.1.3.3.4.6.34
Load 34 is off.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpPduAlarmLoadOff35		1.3.6.1.4.1.850.1.3.3.4.6.35
Load 35 is off.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpPduAlarmLoadOff36		1.3.6.1.4.1.850.1.3.3.4.6.36
Load 36 is off.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpPduAlarmLoadOff37		1.3.6.1.4.1.850.1.3.3.4.6.37
Load 37 is off.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpPduAlarmLoadOff38		1.3.6.1.4.1.850.1.3.3.4.6.38
Load 38 is off.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpPduAlarmLoadOff39		1.3.6.1.4.1.850.1.3.3.4.6.39
Load 39 is off.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpPduAlarmLoadOff40		1.3.6.1.4.1.850.1.3.3.4.6.40
Load 40 is off.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpPduAlarmCircuitBreakerOpen		1.3.6.1.4.1.850.1.3.3.4.7
OBJECT IDENTIFIER

tlpPduAlarmCircuitBreakerOpen01		1.3.6.1.4.1.850.1.3.3.4.7.1
Circuit breaker 1 is open.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpPduAlarmCircuitBreakerOpen02		1.3.6.1.4.1.850.1.3.3.4.7.2
Circuit breaker 2 is open.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpPduAlarmCircuitBreakerOpen03		1.3.6.1.4.1.850.1.3.3.4.7.3
Circuit breaker 3 is open.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpPduAlarmCircuitBreakerOpen04		1.3.6.1.4.1.850.1.3.3.4.7.4
Circuit breaker 4 is open.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpPduAlarmCircuitBreakerOpen05		1.3.6.1.4.1.850.1.3.3.4.7.5
Circuit breaker 5 is open.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpPduAlarmCircuitBreakerOpen06		1.3.6.1.4.1.850.1.3.3.4.7.6
Circuit breaker 6 is open.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpPduAlarmCurrentAboveThreshold		1.3.6.1.4.1.850.1.3.3.4.8
OBJECT IDENTIFIER

tlpPduAlarmCurrentAboveThreshold1		1.3.6.1.4.1.850.1.3.3.4.8.1
The output current on phase 1 exceeds load limits.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpPduAlarmCurrentAboveThreshold2		1.3.6.1.4.1.850.1.3.3.4.8.2
The output current on phase 2 exceeds load limits.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpPduAlarmCurrentAboveThreshold3		1.3.6.1.4.1.850.1.3.3.4.8.3
The output current on phase 3 exceeds load limits.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpPduAlarmLoadsNotAllOn		1.3.6.1.4.1.850.1.3.3.4.9
One of more loads are not on.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpPduAlarmLoadLevelBelowThreshold		1.3.6.1.4.1.850.1.3.3.4.10
The load level is below the designated threshold.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpPduAlarmCurrentBelowThreshold		1.3.6.1.4.1.850.1.3.3.4.11
OBJECT IDENTIFIER

tlpPduAlarmCurrentBelowThreshold1		1.3.6.1.4.1.850.1.3.3.4.11.1
The output current on phase 1 below load limits.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpPduAlarmCurrentBelowThreshold2		1.3.6.1.4.1.850.1.3.3.4.11.2
The output current on phase 2 below load limits.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpPduAlarmCurrentBelowThreshold3		1.3.6.1.4.1.850.1.3.3.4.11.3
The output current on phase 3 below load limits.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpEnvAlarmTemperatureBeyondLimits		1.3.6.1.4.1.850.1.3.3.5.1
The temperature exceeds limits.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpEnvAlarmHumidityBeyondLimits		1.3.6.1.4.1.850.1.3.3.5.2
The humidity exceeds limits.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpEnvAlarmInputContact		1.3.6.1.4.1.850.1.3.3.5.3
OBJECT IDENTIFIER

tlpEnvAlarmInputContact01		1.3.6.1.4.1.850.1.3.3.5.3.1
Input contact 1 is in alarm.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpEnvAlarmInputContact02		1.3.6.1.4.1.850.1.3.3.5.3.2
Input contact 2 is in alarm.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpEnvAlarmInputContact03		1.3.6.1.4.1.850.1.3.3.5.3.3
Input contact 3 is in alarm.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpEnvAlarmInputContact04		1.3.6.1.4.1.850.1.3.3.5.3.4
Input contact 4 is in alarm.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpEnvAlarmOutputContact		1.3.6.1.4.1.850.1.3.3.5.4
OBJECT IDENTIFIER

tlpEnvAlarmOutputContact01		1.3.6.1.4.1.850.1.3.3.5.4.1
Output contact 1 is in alarm.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpEnvAlarmOutputContact02		1.3.6.1.4.1.850.1.3.3.5.4.2
Output contact 2 is in alarm.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpEnvAlarmOutputContact03		1.3.6.1.4.1.850.1.3.3.5.4.3
Output contact 3 is in alarm.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpEnvAlarmOutputContact04		1.3.6.1.4.1.850.1.3.3.5.4.4
Output contact 4 is in alarm.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpAtsAlarmOutage		1.3.6.1.4.1.850.1.3.3.6.1
OBJECT IDENTIFIER

tlpAtsAlarmSource1Outage		1.3.6.1.4.1.850.1.3.3.6.1.1
Input on source 1 is not present. For atss with the designation of primary and secondary, this alarm denotes input on the primary source is not present.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpAtsAlarmSource2Outage		1.3.6.1.4.1.850.1.3.3.6.1.2
Input on source 2 is not present. For atss with the designation of primary and secondary, this alarm denotes input on the secondary source is not present.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpAtsAlarmTemperature		1.3.6.1.4.1.850.1.3.3.6.2
OBJECT IDENTIFIER

tlpAtsAlarmSystemTemperature		1.3.6.1.4.1.850.1.3.3.6.2.1
The system temperature is out of tolerance.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpAtsAlarmSource1Temperature		1.3.6.1.4.1.850.1.3.3.6.2.2
The source 1 temperature is out of tolerance.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpAtsAlarmSource2Temperature		1.3.6.1.4.1.850.1.3.3.6.2.3
The source 2 temperature is out of tolerance.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpAtsAlarmLoadLevelAboveThreshold		1.3.6.1.4.1.850.1.3.3.6.3
The load level is above the designated threshold.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpAtsAlarmInputBad		1.3.6.1.4.1.850.1.3.3.6.4
An input condition is out of tolerance.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpAtsAlarmOutputBad		1.3.6.1.4.1.850.1.3.3.6.5
An output condition (other than OutputOverload) is out of tolerance.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpAtsAlarmOutputOverload		1.3.6.1.4.1.850.1.3.3.6.6
The output load exceeds the ats output capacity.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpAtsAlarmOutputOff		1.3.6.1.4.1.850.1.3.3.6.7
The output of the ats is in the off state.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpAtsAlarmLoadOff		1.3.6.1.4.1.850.1.3.3.6.8
OBJECT IDENTIFIER

tlpAtsAlarmLoadOff01		1.3.6.1.4.1.850.1.3.3.6.8.1
Load 1 is off.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpAtsAlarmLoadOff02		1.3.6.1.4.1.850.1.3.3.6.8.2
Load 2 is off.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpAtsAlarmLoadOff03		1.3.6.1.4.1.850.1.3.3.6.8.3
Load 3 is off.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpAtsAlarmLoadOff04		1.3.6.1.4.1.850.1.3.3.6.8.4
Load 4 is off.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpAtsAlarmLoadOff05		1.3.6.1.4.1.850.1.3.3.6.8.5
Load 5 is off.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpAtsAlarmLoadOff06		1.3.6.1.4.1.850.1.3.3.6.8.6
Load 6 is off.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpAtsAlarmLoadOff07		1.3.6.1.4.1.850.1.3.3.6.8.7
Load 7 is off.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpAtsAlarmLoadOff08		1.3.6.1.4.1.850.1.3.3.6.8.8
Load 8 is off.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpAtsAlarmLoadOff09		1.3.6.1.4.1.850.1.3.3.6.8.9
Load 9 is off.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpAtsAlarmLoadOff10		1.3.6.1.4.1.850.1.3.3.6.8.10
Load 10 is off.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpAtsAlarmLoadOff11		1.3.6.1.4.1.850.1.3.3.6.8.11
Load 11 is off.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpAtsAlarmLoadOff12		1.3.6.1.4.1.850.1.3.3.6.8.12
Load 12 is off.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpAtsAlarmLoadOff13		1.3.6.1.4.1.850.1.3.3.6.8.13
Load 13 is off.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpAtsAlarmLoadOff14		1.3.6.1.4.1.850.1.3.3.6.8.14
Load 14 is off.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpAtsAlarmLoadOff15		1.3.6.1.4.1.850.1.3.3.6.8.15
Load 15 is off.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpAtsAlarmLoadOff16		1.3.6.1.4.1.850.1.3.3.6.8.16
Load 16 is off.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpAtsAlarmLoadOff17		1.3.6.1.4.1.850.1.3.3.6.8.17
Load 17 is off.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpAtsAlarmLoadOff18		1.3.6.1.4.1.850.1.3.3.6.8.18
Load 18 is off.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpAtsAlarmLoadOff19		1.3.6.1.4.1.850.1.3.3.6.8.19
Load 19 is off.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpAtsAlarmLoadOff20		1.3.6.1.4.1.850.1.3.3.6.8.20
Load 20 is off.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpAtsAlarmLoadOff21		1.3.6.1.4.1.850.1.3.3.6.8.21
Load 21 is off.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpAtsAlarmLoadOff22		1.3.6.1.4.1.850.1.3.3.6.8.22
Load 22 is off.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpAtsAlarmLoadOff23		1.3.6.1.4.1.850.1.3.3.6.8.23
Load 23 is off.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpAtsAlarmLoadOff24		1.3.6.1.4.1.850.1.3.3.6.8.24
Load 24 is off.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpAtsAlarmLoadOff25		1.3.6.1.4.1.850.1.3.3.6.8.25
Load 25 is off.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpAtsAlarmLoadOff26		1.3.6.1.4.1.850.1.3.3.6.8.26
Load 26 is off.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpAtsAlarmLoadOff27		1.3.6.1.4.1.850.1.3.3.6.8.27
Load 27 is off.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpAtsAlarmLoadOff28		1.3.6.1.4.1.850.1.3.3.6.8.28
Load 28 is off.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpAtsAlarmLoadOff29		1.3.6.1.4.1.850.1.3.3.6.8.29
Load 29 is off.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpAtsAlarmLoadOff30		1.3.6.1.4.1.850.1.3.3.6.8.30
Load 30 is off.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpAtsAlarmLoadOff31		1.3.6.1.4.1.850.1.3.3.6.8.31
Load 31 is off.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpAtsAlarmLoadOff32		1.3.6.1.4.1.850.1.3.3.6.8.32
Load 32 is off.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpAtsAlarmLoadOff33		1.3.6.1.4.1.850.1.3.3.6.8.33
Load 33 is off.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpAtsAlarmLoadOff34		1.3.6.1.4.1.850.1.3.3.6.8.34
Load 34 is off.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpAtsAlarmLoadOff35		1.3.6.1.4.1.850.1.3.3.6.8.35
Load 35 is off.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpAtsAlarmLoadOff36		1.3.6.1.4.1.850.1.3.3.6.8.36
Load 36 is off.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpAtsAlarmLoadOff37		1.3.6.1.4.1.850.1.3.3.6.8.37
Load 37 is off.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpAtsAlarmLoadOff38		1.3.6.1.4.1.850.1.3.3.6.8.38
Load 38 is off.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpAtsAlarmLoadOff39		1.3.6.1.4.1.850.1.3.3.6.8.39
Load 39 is off.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpAtsAlarmLoadOff40		1.3.6.1.4.1.850.1.3.3.6.8.40
Load 40 is off.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpAtsAlarmCircuitBreakerOpen		1.3.6.1.4.1.850.1.3.3.6.9
OBJECT IDENTIFIER

tlpAtsAlarmCircuitBreakerOpen01		1.3.6.1.4.1.850.1.3.3.6.9.1
Circuit breaker 1 is open.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpAtsAlarmCircuitBreakerOpen02		1.3.6.1.4.1.850.1.3.3.6.9.2
Circuit breaker 2 is open.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpAtsAlarmCircuitBreakerOpen03		1.3.6.1.4.1.850.1.3.3.6.9.3
Circuit breaker 3 is open.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpAtsAlarmCircuitBreakerOpen04		1.3.6.1.4.1.850.1.3.3.6.9.4
Circuit breaker 4 is open.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpAtsAlarmCircuitBreakerOpen05		1.3.6.1.4.1.850.1.3.3.6.9.5
Circuit breaker 5 is open.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpAtsAlarmCircuitBreakerOpen06		1.3.6.1.4.1.850.1.3.3.6.9.6
Circuit breaker 6 is open.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpAtsAlarmCurrentAboveThreshold		1.3.6.1.4.1.850.1.3.3.6.10
OBJECT IDENTIFIER

tlpAtsAlarmCurrentAboveThresholdA1		1.3.6.1.4.1.850.1.3.3.6.10.1
The output current on input source 1 phase 1 exceeds load limits.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpAtsAlarmCurrentAboveThresholdA2		1.3.6.1.4.1.850.1.3.3.6.10.2
The output current on input source 1 phase 2 exceeds load limits.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpAtsAlarmCurrentAboveThresholdA3		1.3.6.1.4.1.850.1.3.3.6.10.3
The output current on input source 1 phase 3 exceeds load limits.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpAtsAlarmCurrentAboveThresholdB1		1.3.6.1.4.1.850.1.3.3.6.10.4
The output current on input source 2 phase 1 exceeds load limits.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpAtsAlarmCurrentAboveThresholdB2		1.3.6.1.4.1.850.1.3.3.6.10.5
The output current on input source 2 phase 2 exceeds load limits.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpAtsAlarmCurrentAboveThresholdB3		1.3.6.1.4.1.850.1.3.3.6.10.6
The output current on input source 2 phase 3 exceeds load limits.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpAtsAlarmLoadsNotAllOn		1.3.6.1.4.1.850.1.3.3.6.11
One of more loads are not on.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpAtsAlarmGeneralFault		1.3.6.1.4.1.850.1.3.3.6.12
A general fault in the ats has been detected.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpAtsAlarmVoltage		1.3.6.1.4.1.850.1.3.3.6.13
OBJECT IDENTIFIER

tlpAtsAlarmOverVoltage		1.3.6.1.4.1.850.1.3.3.6.13.1
The input voltage is out of tolerance.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpAtsAlarmSource1OverVoltage		1.3.6.1.4.1.850.1.3.3.6.13.2
The voltage on source 1 is out of tolerance.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpAtsAlarmSource2OverVoltage		1.3.6.1.4.1.850.1.3.3.6.13.3
The voltage on source 2 is out of tolerance.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpAtsAlarmFrequency		1.3.6.1.4.1.850.1.3.3.6.14
OBJECT IDENTIFIER

tlpAtsAlarmSource1InvalidFrequency		1.3.6.1.4.1.850.1.3.3.6.14.1
The voltage on source 1 is out of tolerance.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpAtsAlarmSource2InvalidFrequency		1.3.6.1.4.1.850.1.3.3.6.14.2
The voltage on source 2 is out of tolerance.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpAtsAlarmLoadLevelBelowThreshold		1.3.6.1.4.1.850.1.3.3.6.15
The load level is below the designated threshold.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpAtsAlarmCurrentBelowThreshold		1.3.6.1.4.1.850.1.3.3.6.16
OBJECT IDENTIFIER

tlpAtsAlarmCurrentBelowThresholdA1		1.3.6.1.4.1.850.1.3.3.6.16.1
The output current on input source 1 phase 1 below load limits.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpAtsAlarmCurrentBelowThresholdA2		1.3.6.1.4.1.850.1.3.3.6.16.2
The output current on input source 1 phase 2 below load limits.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpAtsAlarmCurrentBelowThresholdA3		1.3.6.1.4.1.850.1.3.3.6.16.3
The output current on input source 1 phase 3 below load limits.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpAtsAlarmCurrentBelowThresholdB1		1.3.6.1.4.1.850.1.3.3.6.16.4
The output current on input source 2 phase 1 below load limits.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpAtsAlarmCurrentBelowThresholdB2		1.3.6.1.4.1.850.1.3.3.6.16.5
The output current on input source 2 phase 2 below load limits.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpAtsAlarmCurrentBelowThresholdB3		1.3.6.1.4.1.850.1.3.3.6.16.6
The output current on input source 2 phase 3 below load limits.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpCoolingAlarmSupplyAirSensorFault		1.3.6.1.4.1.850.1.3.3.7.1
The supply air sensor is in fault.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpCoolingAlarmReturnAirSensorFault		1.3.6.1.4.1.850.1.3.3.7.2
The return air sensor is in fault.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpCoolingAlarmCondenserInletAirSensorFault		1.3.6.1.4.1.850.1.3.3.7.3
The condenser inlet air sensor is in fault.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpCoolingAlarmCondenserOutletAirSensorFault		1.3.6.1.4.1.850.1.3.3.7.4
The condenser outlet air sensor is in fault.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpCoolingAlarmSuctionTemperatureSensorFault		1.3.6.1.4.1.850.1.3.3.7.5
The suction temperature sensor is in fault.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpCoolingAlarmEvaporatorTemperatureSensorFault		1.3.6.1.4.1.850.1.3.3.7.6
The evaporator temperature sensor is in fault.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpCoolingAlarmAirFilterClogged		1.3.6.1.4.1.850.1.3.3.7.7
The air filter is clogged.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpCoolingAlarmAirFilterRunHoursViolation		1.3.6.1.4.1.850.1.3.3.7.8
The air filter run hours was violated.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpCoolingAlarmSuctionPressureSensorFault		1.3.6.1.4.1.850.1.3.3.7.9
The suction pressure sensor is in fault.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpCoolingAlarmInverterCommunicationsFault		1.3.6.1.4.1.850.1.3.3.7.10
The inverter communications is in fault.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpCoolingAlarmRemoteShutdownViaInputContact		1.3.6.1.4.1.850.1.3.3.7.11
A remote shutdown was triggerd by an input contact.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpCoolingAlarmCondensatePumpFault		1.3.6.1.4.1.850.1.3.3.7.12
The condensate pump is in fault.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpCoolingAlarmLowRefrigerantStartupFault		1.3.6.1.4.1.850.1.3.3.7.13
The low refrigerant startup is in fault.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpCoolingAlarmCondenserFanFault		1.3.6.1.4.1.850.1.3.3.7.14
The condenser fan is in fault.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpCoolingAlarmCondenserFailure		1.3.6.1.4.1.850.1.3.3.7.15
The condenser has failed.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpCoolingAlarmEvaporatorCoolingFailure		1.3.6.1.4.1.850.1.3.3.7.16
The evaporator cooling is in fault.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpCoolingAlarmReturnAirTempHigh		1.3.6.1.4.1.850.1.3.3.7.17
The return air temperature is high.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpCoolingAlarmSupplyAirTempHigh		1.3.6.1.4.1.850.1.3.3.7.18
The supply air temperature is high.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpCoolingAlarmEvaporatorFailure		1.3.6.1.4.1.850.1.3.3.7.19
The evaporator has failed.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpCoolingAlarmEvaporatorFreezeUp		1.3.6.1.4.1.850.1.3.3.7.20
The evaporator is frozen.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpCoolingAlarmDischargePressureHigh		1.3.6.1.4.1.850.1.3.3.7.21
The discharge pressure is high.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpCoolingAlarmPressureGaugeFailure		1.3.6.1.4.1.850.1.3.3.7.22
The pressure gauge has failed.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpCoolingAlarmDischargePressurePersistentHigh		1.3.6.1.4.1.850.1.3.3.7.23
The discharge pressure is persistently high.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpCoolingAlarmSuctionPressureLowStartFailure		1.3.6.1.4.1.850.1.3.3.7.24
Cannot start due to low suction pressure.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpCoolingAlarmSuctionPressureLow		1.3.6.1.4.1.850.1.3.3.7.25
The suction pressure is low.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpCoolingAlarmSuctionPressurePersistentLow		1.3.6.1.4.1.850.1.3.3.7.26
The suction pressure is persistently low.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpCoolingAlarmStartupLinePressureImbalance		1.3.6.1.4.1.850.1.3.3.7.27
The startup line pressure is in imbalance.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpCoolingAlarmCompressorFailure		1.3.6.1.4.1.850.1.3.3.7.28
The compressor has failed.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpCoolingAlarmCurrentLimit		1.3.6.1.4.1.850.1.3.3.7.29
The current is out of range.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpCoolingAlarmWaterLeak		1.3.6.1.4.1.850.1.3.3.7.30
Water is leaking.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpCoolingAlarmFanUnderCurrent		1.3.6.1.4.1.850.1.3.3.7.31
The fan is under current.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpCoolingAlarmFanOverCurrent		1.3.6.1.4.1.850.1.3.3.7.32
The fan is over current.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpCoolingAlarmDischargePressureSensorFault		1.3.6.1.4.1.850.1.3.3.7.33
The discharge pressure sensor is in fault.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpCoolingAlarmWaterFull		1.3.6.1.4.1.850.1.3.3.7.34
Water is Full.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpCoolingAlarmAutoCoolingOn		1.3.6.1.4.1.850.1.3.3.7.35
Automatic cooling was activated to lower the temperature below the remote set point.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpCoolingAlarmPowerButtonPressed		1.3.6.1.4.1.850.1.3.3.7.36
Power button was pressed on the front panel.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpCoolingAlarmDisconnectedFromDevice		1.3.6.1.4.1.850.1.3.3.7.37
The device communications is disconnected.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpCoolingAlarmAmbientTemperatureSensorFault		1.3.6.1.4.1.850.1.3.3.7.38
Ambient temperature sensor is in fault.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpCoolingAlarmRemoteTemperatureSensorFault		1.3.6.1.4.1.850.1.3.3.7.39
Remote temperature sensor is in fault.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpCoolingAlarmLowPressureSensorFault		1.3.6.1.4.1.850.1.3.3.7.40
Low pressure sensor is in fault.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpCoolingAlarmHighPressureSensorFault		1.3.6.1.4.1.850.1.3.3.7.41
High pressure sensor is in fault.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpCoolingAlarmSentrytimerTimeout		1.3.6.1.4.1.850.1.3.3.7.42
Sentry timer time out.
Status: current	Access: read-write
OBJECT-IDENTITY

tlpAutoProbeAlarms		1.3.6.1.4.1.850.1.3.3.1.1
OBJECT IDENTIFIER

tlpAutoProbeAlarm01		1.3.6.1.4.1.850.1.3.3.1.1.1
Auto Probe 1 had failed
Status: current	Access: read-write
OBJECT-IDENTITY

tlpAutoProbeAlarm02		1.3.6.1.4.1.850.1.3.3.1.1.2
Auto Probe 2 had failed
Status: current	Access: read-write
OBJECT-IDENTITY

tlpAutoProbeAlarm03		1.3.6.1.4.1.850.1.3.3.1.1.3
Auto Probe 3 had failed
Status: current	Access: read-write
OBJECT-IDENTITY

tlpAutoProbeAlarm04		1.3.6.1.4.1.850.1.3.3.1.1.4
Auto Probe 4 had failed
Status: current	Access: read-write
OBJECT-IDENTITY

tlpAutoProbeAlarm05		1.3.6.1.4.1.850.1.3.3.1.1.5
Auto Probe 5 had failed
Status: current	Access: read-write
OBJECT-IDENTITY

tlpAutoProbeAlarm06		1.3.6.1.4.1.850.1.3.3.1.1.6
Auto Probe 6 had failed
Status: current	Access: read-write
OBJECT-IDENTITY

tlpAutoProbeAlarm07		1.3.6.1.4.1.850.1.3.3.1.1.7
Auto Probe 7 had failed
Status: current	Access: read-write
OBJECT-IDENTITY

tlpAutoProbeAlarm08		1.3.6.1.4.1.850.1.3.3.1.1.8
Auto Probe 8 had failed
Status: current	Access: read-write
OBJECT-IDENTITY

tlpAutoProbeAlarm09		1.3.6.1.4.1.850.1.3.3.1.1.9
Auto Probe 9 had failed
Status: current	Access: read-write
OBJECT-IDENTITY

tlpAutoProbeAlarm10		1.3.6.1.4.1.850.1.3.3.1.1.10
Auto Probe 10 had failed
Status: current	Access: read-write
OBJECT-IDENTITY

tlpAutoProbeAlarm11		1.3.6.1.4.1.850.1.3.3.1.1.11
Auto Probe 11 had failed
Status: current	Access: read-write
OBJECT-IDENTITY

tlpAutoProbeAlarm12		1.3.6.1.4.1.850.1.3.3.1.1.12
Auto Probe 12 had failed
Status: current	Access: read-write
OBJECT-IDENTITY

tlpAutoProbeAlarm13		1.3.6.1.4.1.850.1.3.3.1.1.13
Auto Probe 13 had failed
Status: current	Access: read-write
OBJECT-IDENTITY

tlpAutoProbeAlarm14		1.3.6.1.4.1.850.1.3.3.1.1.14
Auto Probe 14 had failed
Status: current	Access: read-write
OBJECT-IDENTITY

tlpAutoProbeAlarm15		1.3.6.1.4.1.850.1.3.3.1.1.15
Auto Probe 15 had failed
Status: current	Access: read-write
OBJECT-IDENTITY

tlpAutoProbeAlarm16		1.3.6.1.4.1.850.1.3.3.1.1.16
Auto Probe 16 had failed
Status: current	Access: read-write
OBJECT-IDENTITY

tlpAutoProbeAlarm17		1.3.6.1.4.1.850.1.3.3.1.1.17
Auto Probe 17 had failed
Status: current	Access: read-write
OBJECT-IDENTITY

tlpAutoProbeAlarm18		1.3.6.1.4.1.850.1.3.3.1.1.18
Auto Probe 18 had failed
Status: current	Access: read-write
OBJECT-IDENTITY

tlpAutoProbeAlarm19		1.3.6.1.4.1.850.1.3.3.1.1.19
Auto Probe 19 had failed
Status: current	Access: read-write
OBJECT-IDENTITY

tlpAutoProbeAlarm20		1.3.6.1.4.1.850.1.3.3.1.1.20
Auto Probe 20 had failed
Status: current	Access: read-write
OBJECT-IDENTITY

tlpAutoProbeAlarm21		1.3.6.1.4.1.850.1.3.3.1.1.21
Auto Probe 21 had failed
Status: current	Access: read-write
OBJECT-IDENTITY

tlpAutoProbeAlarm22		1.3.6.1.4.1.850.1.3.3.1.1.22
Auto Probe 22 had failed
Status: current	Access: read-write
OBJECT-IDENTITY

tlpAutoProbeAlarm23		1.3.6.1.4.1.850.1.3.3.1.1.23
Auto Probe 23 had failed
Status: current	Access: read-write
OBJECT-IDENTITY

tlpAutoProbeAlarm24		1.3.6.1.4.1.850.1.3.3.1.1.24
Auto Probe 24 had failed
Status: current	Access: read-write
OBJECT-IDENTITY

tlpAutoProbeAlarm25		1.3.6.1.4.1.850.1.3.3.1.1.25
Auto Probe 25 had failed
Status: current	Access: read-write
OBJECT-IDENTITY

tlpAutoProbeAlarm26		1.3.6.1.4.1.850.1.3.3.1.1.26
Auto Probe 26 had failed
Status: current	Access: read-write
OBJECT-IDENTITY

tlpAutoProbeAlarm27		1.3.6.1.4.1.850.1.3.3.1.1.27
Auto Probe 27 had failed
Status: current	Access: read-write
OBJECT-IDENTITY

tlpAutoProbeAlarm28		1.3.6.1.4.1.850.1.3.3.1.1.28
Auto Probe 28 had failed
Status: current	Access: read-write
OBJECT-IDENTITY

tlpAutoProbeAlarm29		1.3.6.1.4.1.850.1.3.3.1.1.29
Auto Probe 29 had failed
Status: current	Access: read-write
OBJECT-IDENTITY

tlpAutoProbeAlarm30		1.3.6.1.4.1.850.1.3.3.1.1.30
Auto Probe 30 had failed
Status: current	Access: read-write
OBJECT-IDENTITY

tlpAutoProbeAlarm31		1.3.6.1.4.1.850.1.3.3.1.1.31
Auto Probe 31 had failed
Status: current	Access: read-write
OBJECT-IDENTITY

tlpAutoProbeAlarm32		1.3.6.1.4.1.850.1.3.3.1.1.32
Auto Probe 32 had failed
Status: current	Access: read-write
OBJECT-IDENTITY

tlpAutoProbeAlarm33		1.3.6.1.4.1.850.1.3.3.1.1.33
Auto Probe 33 had failed
Status: current	Access: read-write
OBJECT-IDENTITY

tlpAutoProbeAlarm34		1.3.6.1.4.1.850.1.3.3.1.1.34
Auto Probe 34 had failed
Status: current	Access: read-write
OBJECT-IDENTITY

tlpAutoProbeAlarm35		1.3.6.1.4.1.850.1.3.3.1.1.35
Auto Probe 35 had failed
Status: current	Access: read-write
OBJECT-IDENTITY

tlpAutoProbeAlarm36		1.3.6.1.4.1.850.1.3.3.1.1.36
Auto Probe 36 had failed
Status: current	Access: read-write
OBJECT-IDENTITY

tlpAutoProbeAlarm37		1.3.6.1.4.1.850.1.3.3.1.1.37
Auto Probe 37 had failed
Status: current	Access: read-write
OBJECT-IDENTITY

tlpAutoProbeAlarm38		1.3.6.1.4.1.850.1.3.3.1.1.38
Auto Probe 38 had failed
Status: current	Access: read-write
OBJECT-IDENTITY

tlpAutoProbeAlarm39		1.3.6.1.4.1.850.1.3.3.1.1.39
Auto Probe 39 had failed
Status: current	Access: read-write
OBJECT-IDENTITY

tlpAutoProbeAlarm40		1.3.6.1.4.1.850.1.3.3.1.1.40
Auto Probe 40 had failed
Status: current	Access: read-write
OBJECT-IDENTITY

tlpAutoProbeAlarm41		1.3.6.1.4.1.850.1.3.3.1.1.41
Auto Probe 41 had failed
Status: current	Access: read-write
OBJECT-IDENTITY

tlpAutoProbeAlarm42		1.3.6.1.4.1.850.1.3.3.1.1.42
Auto Probe 42 had failed
Status: current	Access: read-write
OBJECT-IDENTITY

tlpAutoProbeAlarm43		1.3.6.1.4.1.850.1.3.3.1.1.43
Auto Probe 43 had failed
Status: current	Access: read-write
OBJECT-IDENTITY

tlpAutoProbeAlarm44		1.3.6.1.4.1.850.1.3.3.1.1.44
Auto Probe 44 had failed
Status: current	Access: read-write
OBJECT-IDENTITY

tlpAutoProbeAlarm45		1.3.6.1.4.1.850.1.3.3.1.1.45
Auto Probe 45 had failed
Status: current	Access: read-write
OBJECT-IDENTITY

tlpAutoProbeAlarm46		1.3.6.1.4.1.850.1.3.3.1.1.46
Auto Probe 46 had failed
Status: current	Access: read-write
OBJECT-IDENTITY

tlpAutoProbeAlarm47		1.3.6.1.4.1.850.1.3.3.1.1.47
Auto Probe 47 had failed
Status: current	Access: read-write
OBJECT-IDENTITY

tlpAutoProbeAlarm48		1.3.6.1.4.1.850.1.3.3.1.1.48
Auto Probe 48 had failed
Status: current	Access: read-write
OBJECT-IDENTITY

tlpAutoProbeAlarm49		1.3.6.1.4.1.850.1.3.3.1.1.49
Auto Probe 49 had failed
Status: current	Access: read-write
OBJECT-IDENTITY

tlpAutoProbeAlarm50		1.3.6.1.4.1.850.1.3.3.1.1.50
Auto Probe 50 had failed
Status: current	Access: read-write
OBJECT-IDENTITY

tlpAutoProbeAlarm51		1.3.6.1.4.1.850.1.3.3.1.1.51
Auto Probe 51 had failed
Status: current	Access: read-write
OBJECT-IDENTITY

tlpAutoProbeAlarm52		1.3.6.1.4.1.850.1.3.3.1.1.52
Auto Probe 52 had failed
Status: current	Access: read-write
OBJECT-IDENTITY

tlpAutoProbeAlarm53		1.3.6.1.4.1.850.1.3.3.1.1.53
Auto Probe 53 had failed
Status: current	Access: read-write
OBJECT-IDENTITY

tlpAutoProbeAlarm54		1.3.6.1.4.1.850.1.3.3.1.1.54
Auto Probe 54 had failed
Status: current	Access: read-write
OBJECT-IDENTITY

tlpAutoProbeAlarm55		1.3.6.1.4.1.850.1.3.3.1.1.55
Auto Probe 55 had failed
Status: current	Access: read-write
OBJECT-IDENTITY

tlpAutoProbeAlarm56		1.3.6.1.4.1.850.1.3.3.1.1.56
Auto Probe 56 had failed
Status: current	Access: read-write
OBJECT-IDENTITY

tlpAutoProbeAlarm57		1.3.6.1.4.1.850.1.3.3.1.1.57
Auto Probe 57 had failed
Status: current	Access: read-write
OBJECT-IDENTITY

tlpAutoProbeAlarm58		1.3.6.1.4.1.850.1.3.3.1.1.58
Auto Probe 58 had failed
Status: current	Access: read-write
OBJECT-IDENTITY

tlpAutoProbeAlarm59		1.3.6.1.4.1.850.1.3.3.1.1.59
Auto Probe 59 had failed
Status: current	Access: read-write
OBJECT-IDENTITY

tlpAutoProbeAlarm60		1.3.6.1.4.1.850.1.3.3.1.1.60
Auto Probe 60 had failed
Status: current	Access: read-write
OBJECT-IDENTITY

tlpAutoProbeAlarm61		1.3.6.1.4.1.850.1.3.3.1.1.61
Auto Probe 61 had failed
Status: current	Access: read-write
OBJECT-IDENTITY

tlpAutoProbeAlarm62		1.3.6.1.4.1.850.1.3.3.1.1.62
Auto Probe 62 had failed
Status: current	Access: read-write
OBJECT-IDENTITY

tlpAutoProbeAlarm63		1.3.6.1.4.1.850.1.3.3.1.1.63
Auto Probe 63 had failed
Status: current	Access: read-write
OBJECT-IDENTITY

tlpAutoProbeAlarm64		1.3.6.1.4.1.850.1.3.3.1.1.64
Auto Probe 64 had failed
Status: current	Access: read-write
OBJECT-IDENTITY

tlpAlarmControlTable		1.3.6.1.4.1.850.1.3.4.1
A list of alarm conditions supported for each device managed by this agent. This table contains zero, one, or many rows depending upon the number of available alarms managed by each device.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		TlpAlarmControlEntry

tlpAlarmControlEntry		1.3.6.1.4.1.850.1.3.4.1.1
An entry containing details for a particular alarm condition.
Status: current	Access: not-accessible
OBJECT-TYPE
	TlpAlarmControlEntry

tlpAlarmControlIndex		1.3.6.1.4.1.850.1.3.4.1.1.1
The table row index for this alarm control entry for this device. The index of any one row represents the index of the alarm entry within the agent system. As such, the index values for any one device is not guaranteed to start with 1 or be numerically sequential.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tlpAlarmControlDescr		1.3.6.1.4.1.850.1.3.4.1.1.2
A reference of the alarm description object. The object referenced should not be accessible, but rather be used to provide a unique description for the alarm condition. The object referenced will be a well known alarm object associated with the device on which the alarm condition is active. This will be the same object description of an alarm when in alarm as referenced by tlpAlarmDescr.
Status: current	Access: read-only
OBJECT-TYPE
	OBJECT IDENTIFIER

tlpAlarmControlDetail		1.3.6.1.4.1.850.1.3.4.1.1.3
A textual description of the alarm condition. This will be the same textual description of an alarm when in alarm as referenced by tlpAlarmDetail.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

tlpAlarmControlSeverity		1.3.6.1.4.1.850.1.3.4.1.1.4
The severity of this alarm, which can be configured as desired for each alarm condition. This will be the same severity used when in alarm as referenced by tlpAlarmType.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	critical(1), warning(2), info(3)

tlpNotificationsAlarmEntryAdded		1.3.6.1.4.1.850.1.4.1.1
This notification is sent each time an alarm condition is inserted into the device alarm table, tlpAlarmTable.
Status: current	Access: read-write
NOTIFICATION-TYPE

tlpNotificationsAlarmEntryRemoved		1.3.6.1.4.1.850.1.4.1.2
This notification is sent each time an alarm condition is removed from the device alarm table, tlpAlarmTable.
Status: current	Access: read-write
NOTIFICATION-TYPE

tlpNotifySystemStartup		1.3.6.1.4.1.850.1.4.1.3
Used to inform another entity of an agent's startup. The varbinds that follow are: OBJ1 = tlpAgentType Obj1Value = The type of engine providing this data OBJ2 = tlpAgentVersion Obj2Value = The current version of the engine OBJ3 = tlpAgentMAC Obj3Value = The MAC address of the engine OBJ4 = tlpAgentSerialNum Obj4Value = The serial number of the web card [should be 0 on PC] --- if this trap is extended, place all static OIDs above this mark. all objects below --- the number of devices (tlpDeviceNumDevices) is explicit as per device for enumeration by --- the target receiver OBJ5 = tlpDeviceNumDevices Obj5Value = The number of devices attached --- The following objects will be replicated per each device: OBJ6 = The OID for an entry of tlpDeviceManufacturer, indexed by device Obj6Value = The device's manufacturer OBJ7 = The OID for an entry of tlpDeviceModel, indexed by device Obj7Value = The device's model name OBJ8 = The OID for an entry of tlpDeviceName, indexed by device Obj8Value = The device's display name OBJ9 = The OID for an entry of tlpDeviceLocation, indexed by device Obj9Value = The device's location OBJ10 = The OID for an entry of tlpDeviceRegion, indexed by device Obj10Value= The device's region OBJ11 = The OID for an entry of tlpDeviceProtocol, indexed by device Obj11Value= The device's protocol (display string format)
Status: current	Access: read-write
NOTIFICATION-TYPE

tlpNotifySystemShutdown		1.3.6.1.4.1.850.1.4.1.4
Used to inform another entity of an agent's shutdown. The varbinds that follow are: OBJ1 = tlpAgentType Obj1Value = The type of engine providing this data OBJ2 = tlpAgentVersion Obj2Value = The current version of the engine OBJ3 = tlpAgentMAC Obj3Value = The MAC address of the engine OBJ4 = tlpAgentSerialNum Obj4Value = The serial number of the web card [should be 0 on PC] --- if this trap is extended, place all static OIDs above this mark. all objects below --- the number of devices (tlpDeviceNumDevices) is explicit as per device for enumeration by --- the target receiver OBJ5 = tlpDeviceNumDevices Obj5Value = The number of devices attached --- The following objects will be replicated per each device: OBJ6 = The OID for an entry of tlpDeviceManufacturer, indexed by device Obj6Value = The device's manufacturer OBJ7 = The OID for an entry of tlpDeviceModel, indexed by device Obj7Value = The device's model name OBJ8 = The OID for an entry of tlpDeviceName, indexed by device Obj8Value = The device's display name OBJ9 = The OID for an entry of tlpDeviceLocation, indexed by device Obj9Value = The device's location OBJ10 = The OID for an entry of tlpDeviceRegion, indexed by device Obj10Value= The device's region OBJ11 = The OID for an entry of tlpDeviceProtocol, indexed by device Obj11Value= The device's protocol (display string format)
Status: current	Access: read-write
NOTIFICATION-TYPE

tlpNotifySystemUpdate		1.3.6.1.4.1.850.1.4.1.5
Used to inform another entity of an engine's startup. The varbinds that follow are: OBJ1 = tlpAgentType Obj1Value = The type of engine providing this data OBJ2 = tlpAgentVersion Obj2Value = The current version of the engine OBJ3 = tlpAgentMAC Obj3Value = The MAC address of the engine OBJ4 = tlpAgentSerialNum Obj4Value = The serial number of the web card [should be 0 on PC] --- if this trap is extended, place all static OIDs above this mark. all objects below --- the number of devices (tlpDeviceNumDevices) is explicit as per device for enumeration by --- the target receiver OBJ5 = tlpDeviceNumDevices Obj5Value = The number of devices attached --- The following objects will be replicated per each device: OBJ6 = The OID for an entry of tlpDeviceManufacturer, indexed by device Obj6Value = The device's manufacturer OBJ7 = The OID for an entry of tlpDeviceModel, indexed by device Obj7Value = The device's model name OBJ8 = The OID for an entry of tlpDeviceName, indexed by device Obj8Value = The device's display name OBJ9 = The OID for an entry of tlpDeviceLocation, indexed by device Obj9Value = The device's location OBJ10 = The OID for an entry of tlpDeviceRegion, indexed by device Obj10Value= The device's region OBJ11 = The OID for an entry of tlpDeviceProtocol, indexed by device Obj11Value= The device's protocol (display string format)
Status: current	Access: read-write
NOTIFICATION-TYPE

tlpNotifyTest		1.3.6.1.4.1.850.1.4.1.6
Used when performing a test of the system or an alert notification contact. The varbinds that follow are: OBJ1 = tlpAgentType Obj1Value = The type of engine providing this data OBJ2 = tlpAgentVersion Obj2Value = The current version of the engine OBJ3 = tlpAgentMAC Obj3Value = The MAC address of the engine OBJ4 = tlpAgentSerialNum Obj4Value = The serial number of the web card [should be 0 on PC]
Status: current	Access: read-write
NOTIFICATION-TYPE

tlpNotificationsAgent		1.3.6.1.4.1.850.1.4.2.1
OBJECT IDENTIFIER

tlpNotificationsDevice		1.3.6.1.4.1.850.1.4.2.2
OBJECT IDENTIFIER

tlpNotificationsDeviceInternalFirmwareFault		1.3.6.1.4.1.850.1.4.2.2.1
This notification is sent when the device experiences an internal firmware failure.
Status: current	Access: read-write
NOTIFICATION-TYPE

tlpNotificationsDeviceInternalHardwareFault		1.3.6.1.4.1.850.1.4.2.2.2
This notification is sent when the device experiences an internal hardware failure.
Status: current	Access: read-write
NOTIFICATION-TYPE

tlpNotificationsDeviceConfigurationChange		1.3.6.1.4.1.850.1.4.2.2.3
This notification is sent when the device configuration changes.
Status: current	Access: read-write
NOTIFICATION-TYPE

tlpNotificationsDeviceFirmwareUpdate		1.3.6.1.4.1.850.1.4.2.2.4
This notification is sent when the device firmware is updated.
Status: current	Access: read-write
NOTIFICATION-TYPE

tlpNotificationsDeviceMicrocontrollerReset		1.3.6.1.4.1.850.1.4.2.2.5
This notification is sent when the device microcontroller resets.
Status: current	Access: read-write
NOTIFICATION-TYPE

tlpNotificationsDeviceSystemInformation		1.3.6.1.4.1.850.1.4.2.2.6
This notification is sent when the device sysytem information changes.
Status: current	Access: read-write
NOTIFICATION-TYPE

tlpNotificationsDeviceNvrChecksumMismatch		1.3.6.1.4.1.850.1.4.2.2.7
This notification is sent when the NVR is corrupted.
Status: current	Access: read-write
NOTIFICATION-TYPE

tlpNotificationsDeviceUsbCommunicationsEstablished		1.3.6.1.4.1.850.1.4.2.2.8
This notification is sent when the device USB communications is established.
Status: current	Access: read-write
NOTIFICATION-TYPE

tlpNotificationsDeviceUsbCommunicationsLost		1.3.6.1.4.1.850.1.4.2.2.9
This notification is sent when the device USB communications is lost.
Status: current	Access: read-write
NOTIFICATION-TYPE

tlpNotificationsDevicePowerSupplyShutdown		1.3.6.1.4.1.850.1.4.2.2.10
This notification is sent when the device reports a shutdown occurred due to a power supply fault.
Status: current	Access: read-write
NOTIFICATION-TYPE

tlpNotificationsDeviceOverLoadShutdown		1.3.6.1.4.1.850.1.4.2.2.11
This notification is sent when the device reports a shutdown occurred due to an over load fault.
Status: current	Access: read-write
NOTIFICATION-TYPE

tlpNotificationsDeviceCurrentLimitShutdown		1.3.6.1.4.1.850.1.4.2.2.12
This notification is sent when the device reports a shutdown occurred due to a current limit fault.
Status: current	Access: read-write
NOTIFICATION-TYPE

tlpNotificationsDeviceOverTemperatureShutdown		1.3.6.1.4.1.850.1.4.2.2.13
This notification is sent when the device reports a shutdown occurred due to an over temperature fault.
Status: current	Access: read-write
NOTIFICATION-TYPE

tlpNotificationsDeviceModeTransitionTimeout		1.3.6.1.4.1.850.1.4.2.2.14
This notification is sent when the device timed out transitioning to a mode.
Status: current	Access: read-write
NOTIFICATION-TYPE

tlpNotificationsDeviceFailedModeTransitionToIdle		1.3.6.1.4.1.850.1.4.2.2.15
This notification is sent when the device failed a transition to idle mode.
Status: current	Access: read-write
NOTIFICATION-TYPE

tlpNotificationsDeviceInternalCommunicationsLost		1.3.6.1.4.1.850.1.4.2.2.16
This notification is sent when the device lost internal communications.
Status: current	Access: read-write
NOTIFICATION-TYPE

tlpNotificationsDeviceAcknowledgeFaults		1.3.6.1.4.1.850.1.4.2.2.17
This notification is sent when device faults are acknowledged.
Status: current	Access: read-write
NOTIFICATION-TYPE

tlpNotificationsDeviceTransferToReboot		1.3.6.1.4.1.850.1.4.2.2.18
This notification is sent when a device reboot occurred.
Status: current	Access: read-write
NOTIFICATION-TYPE

tlpNotificationsDeviceTransferToWatchdogReboot		1.3.6.1.4.1.850.1.4.2.2.19
This notification is sent when a device reboot occurred due to a watchdog fault.
Status: current	Access: read-write
NOTIFICATION-TYPE

tlpNotificationsDeviceTransferToLatchedIdle		1.3.6.1.4.1.850.1.4.2.2.20
This notification is sent when the device transferred to latched idle mode.
Status: current	Access: read-write
NOTIFICATION-TYPE

tlpNotificationsDeviceTransferToLatchedStandby		1.3.6.1.4.1.850.1.4.2.2.21
This notification is sent when the device transferred to latched standby mode.
Status: current	Access: read-write
NOTIFICATION-TYPE

tlpNotificationsDeviceTransferToLatchedLine		1.3.6.1.4.1.850.1.4.2.2.22
This notification is sent when the device transferred to latched line mode.
Status: current	Access: read-write
NOTIFICATION-TYPE

tlpNotificationsDeviceFailSafeClockMonitorEngaged		1.3.6.1.4.1.850.1.4.2.2.23
This notification is sent when the fail safe clock monitor is engaged.
Status: current	Access: read-write
NOTIFICATION-TYPE

tlpNotificationsDeviceTransferToIdle		1.3.6.1.4.1.850.1.4.2.2.24
This notification is sent when the device transferred to idle mode.
Status: current	Access: read-write
NOTIFICATION-TYPE

tlpNotificationsDeviceVoutUnderVoltageShutdown		1.3.6.1.4.1.850.1.4.2.2.25
This notification is sent when the device reports a shutdown occurred due to a vout under voltage fault.
Status: current	Access: read-write
NOTIFICATION-TYPE

tlpNotificationsDeviceVoutOverVoltageShutdown		1.3.6.1.4.1.850.1.4.2.2.26
This notification is sent when the device reports a shutdown occurred due to a vout over voltage fault.
Status: current	Access: read-write
NOTIFICATION-TYPE

tlpNotificationsDeviceUnhandledFault		1.3.6.1.4.1.850.1.4.2.2.27
This notification is sent when the device reports an unhandled fault.
Status: current	Access: read-write
NOTIFICATION-TYPE

tlpNotificationsUps		1.3.6.1.4.1.850.1.4.2.3
OBJECT IDENTIFIER

tlpNotificationsUpsBatteryLowVoltageShutdown		1.3.6.1.4.1.850.1.4.2.3.1
This notification is sent when the ups reports a shutdown occurred due to a low battery voltage fault.
Status: current	Access: read-write
NOTIFICATION-TYPE

tlpNotificationsUpsBatteryLowPercentageShutdown		1.3.6.1.4.1.850.1.4.2.3.2
This notification is sent when the ups reports a shutdown occurred due to a low battery percentage fault.
Status: current	Access: read-write
NOTIFICATION-TYPE

tlpNotificationsUpsBatteryOverVoltageShutdown		1.3.6.1.4.1.850.1.4.2.3.3
This notification is sent when the ups reports a shutdown occurred due to a battery over voltage fault.
Status: current	Access: read-write
NOTIFICATION-TYPE

tlpNotificationsUpsBatteryOverCurrentShutdown		1.3.6.1.4.1.850.1.4.2.3.4
This notification is sent when the ups reports a shutdown occurred due to a battery over current fault.
Status: current	Access: read-write
NOTIFICATION-TYPE

tlpNotificationsUpsBatteryUnknownTypeShutdown		1.3.6.1.4.1.850.1.4.2.3.5
This notification is sent when the ups reports a shutdown occurred due to an unknown battery type fault.
Status: current	Access: read-write
NOTIFICATION-TYPE

tlpNotificationsUpsBatteryConfigurationMismatch		1.3.6.1.4.1.850.1.4.2.3.6
This notification is sent when the ups battery configuration is mismatched.
Status: current	Access: read-write
NOTIFICATION-TYPE

tlpNotificationsUpsBatteryUnderVoltageShutdown		1.3.6.1.4.1.850.1.4.2.3.7
This notification is sent when the ups reports a shutdown occurred due to a battery under voltage fault.
Status: current	Access: read-write
NOTIFICATION-TYPE

tlpNotificationsUpsSlaBatteryOverTemperatureShutdown		1.3.6.1.4.1.850.1.4.2.3.8
This notification is sent when the ups reports a shutdown occurred due to an SLA battery over temperature fault.
Status: current	Access: read-write
NOTIFICATION-TYPE

tlpNotificationsUpsBatteryInstallation		1.3.6.1.4.1.850.1.4.2.3.9
This notification is sent when a battery installation occurs.
Status: current	Access: read-write
NOTIFICATION-TYPE

tlpNotificationsUpsChargerBulkToAcceptance		1.3.6.1.4.1.850.1.4.2.3.10
This notification is sent when ups battery charging.
Status: current	Access: read-write
NOTIFICATION-TYPE

tlpNotificationsUpsChargerAcceptanceToFloat		1.3.6.1.4.1.850.1.4.2.3.11
This notification is sent when ups battery fully charged.
Status: current	Access: read-write
NOTIFICATION-TYPE

tlpNotificationsUpsChargerFloatToBulk		1.3.6.1.4.1.850.1.4.2.3.12
This notification is sent when ups battery not fully charged.
Status: current	Access: read-write
NOTIFICATION-TYPE

tlpNotificationsUpsTransferToSelftest		1.3.6.1.4.1.850.1.4.2.3.13
This notification is sent when a self test is initiated.
Status: current	Access: read-write
NOTIFICATION-TYPE

tlpNotificationsUpsTransferToEconomy		1.3.6.1.4.1.850.1.4.2.3.14
This notification is sent when the device transferred to economy mode.
Status: current	Access: read-write
NOTIFICATION-TYPE

tlpNotificationsUpsLineConnectRelayFaultShutdown		1.3.6.1.4.1.850.1.4.2.3.15
This notification is sent when the device reports a shutdown occurred due to line connect relay fault.
Status: current	Access: read-write
NOTIFICATION-TYPE

tlpNotificationsUpsTransferToFaultBypass		1.3.6.1.4.1.850.1.4.2.3.16
This notification is sent when the device transferred to fault bypass mode.
Status: current	Access: read-write
NOTIFICATION-TYPE

tlpNotificationsUpsBypassPowerDistributionModuleDisconnected		1.3.6.1.4.1.850.1.4.2.3.17
This notification is sent when bypass power distribution module is disconnected.
Status: current	Access: read-write
NOTIFICATION-TYPE

tlpNotificationsUpsManualBypassActivatedFromUnsupportedMode		1.3.6.1.4.1.850.1.4.2.3.18
This notification is sent when manual bypass activated from an unsupported UPS mode.
Status: current	Access: read-write
NOTIFICATION-TYPE

tlpNotificationsUpsOnBatteryTimeoutShutdown		1.3.6.1.4.1.850.1.4.2.3.19
This notification is sent when the device reports a shutdown occurred due to on battery timeout.
Status: current	Access: read-write
NOTIFICATION-TYPE

tlpNotificationsUpsLowBatteryPercentageShutdown		1.3.6.1.4.1.850.1.4.2.3.20
This notification is sent when the device reports a shutdown occurred due to low battery percentage.
Status: current	Access: read-write
NOTIFICATION-TYPE

tlpNotificationsPdu		1.3.6.1.4.1.850.1.4.2.4
OBJECT IDENTIFIER

tlpNotificationsEnvirosense		1.3.6.1.4.1.850.1.4.2.5
OBJECT IDENTIFIER

tlpNotificationsAts		1.3.6.1.4.1.850.1.4.2.6
OBJECT IDENTIFIER

tlpNotificationsAtsSource1NotAvailable		1.3.6.1.4.1.850.1.4.2.6.1
This notification is sent when input on source one is not available. For atss with the designation of primary and secondary, this notification denotes input on the primary source is not available.
Status: current	Access: read-write
NOTIFICATION-TYPE

tlpNotificationsAtsSource2NotAvailable		1.3.6.1.4.1.850.1.4.2.6.2
This notification is sent when input on source two is not available. For atss with the designation of primary and secondary, this notification denotes input on the secondary source is not available.
Status: current	Access: read-write
NOTIFICATION-TYPE

tlpNotificationsAtsLockdownToSource1		1.3.6.1.4.1.850.1.4.2.6.3
This notification is sent upon a transfer circuit fault causing the device to be locked on source 1.
Status: current	Access: read-write
NOTIFICATION-TYPE

tlpNotificationsAtsLockdownToSource2		1.3.6.1.4.1.850.1.4.2.6.4
This notification is sent upon a transfer circuit fault causing the device to be locked on source 2.
Status: current	Access: read-write
NOTIFICATION-TYPE

tlpNotificationsAtsSource1Available		1.3.6.1.4.1.850.1.4.2.6.5
This notification is sent when source 1 is available and ready for use.
Status: current	Access: read-write
NOTIFICATION-TYPE

tlpNotificationsAtsSource2Available		1.3.6.1.4.1.850.1.4.2.6.6
This notification is sent when source 2 is available and ready for use.
Status: current	Access: read-write
NOTIFICATION-TYPE

tlpNotificationsAtsSource1Brownout		1.3.6.1.4.1.850.1.4.2.6.7
This notification is sent when a brownout condition occurred on source 1.
Status: current	Access: read-write
NOTIFICATION-TYPE

tlpNotificationsAtsSource2Brownout		1.3.6.1.4.1.850.1.4.2.6.8
This notification is sent when a brownout condition occurred on source 2.
Status: current	Access: read-write
NOTIFICATION-TYPE

tlpNotificationsAtsSource1VoltageDrop		1.3.6.1.4.1.850.1.4.2.6.9
This notification is sent when the voltage on source 1 drops below a usable state.
Status: current	Access: read-write
NOTIFICATION-TYPE

tlpNotificationsAtsSource2VoltageDrop		1.3.6.1.4.1.850.1.4.2.6.10
This notification is sent when the voltage on source 2 drops below a usable state.
Status: current	Access: read-write
NOTIFICATION-TYPE

tlpNotificationsAtsTimedReturnToSource1		1.3.6.1.4.1.850.1.4.2.6.11
This notification is sent when the active input source returns to source 1 from source 2 after a delay time expires.
Status: current	Access: read-write
NOTIFICATION-TYPE

tlpNotificationsAtsTimedReturnToSource2		1.3.6.1.4.1.850.1.4.2.6.12
This notification is sent when the active input source returns to source 2 from source 1 after a delay time expires.
Status: current	Access: read-write
NOTIFICATION-TYPE

tlpNotificationsAtsTransferToSource1		1.3.6.1.4.1.850.1.4.2.6.13
This notification is sent when the active input source transfers from source 2 to source 1.
Status: current	Access: read-write
NOTIFICATION-TYPE

tlpNotificationsAtsTransferToSource2		1.3.6.1.4.1.850.1.4.2.6.14
This notification is sent when the active input source transfers from source 1 to source 2.
Status: current	Access: read-write
NOTIFICATION-TYPE

tlpNotificationsCooling		1.3.6.1.4.1.850.1.4.2.7
OBJECT IDENTIFIER

tlpNotificationsKvm		1.3.6.1.4.1.850.1.4.2.8
OBJECT IDENTIFIER

tlpNotificationsRackTrack		1.3.6.1.4.1.850.1.4.2.9
OBJECT IDENTIFIER

tlpNotificationsSwitch		1.3.6.1.4.1.850.1.4.2.10
OBJECT IDENTIFIER

tlpNotifyEventTableRef		1.3.6.1.4.1.850.1.4.3.1
This value references the OID of a table object applicable to the event condition. This, in conjunction with the table row as defined by tlpAlarmTableRowRef, specifies the object/row within this table to which the event condition applies. Refer to tlpAlarmTableRef for more information.
Status: current	Access: read-only
OBJECT-TYPE
	OBJECT IDENTIFIER

tlpNotifyEventTableRowRef		1.3.6.1.4.1.850.1.4.3.2
This value is used in conjunction with tlpNotifyEventTableRef to define the object associated with this event condition. See the description of tlpNotifyEventTableRef for more information.
Status: current	Access: read-only
OBJECT-TYPE
	OBJECT IDENTIFIER