TN-ETHSOAM-PM-MIB

File: TN-ETHSOAM-PM-MIB.mib (56103 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC TN-ETHSOAM-MIB
TN-EVC-MIB IF-MIB TRANSITION-SMI

Imported symbols

MODULE-IDENTITY OBJECT-TYPE NOTIFICATION-TYPE
Integer32 Counter64 Unsigned32
DateAndTime TimeInterval RowStatus
tnEthSoaminstance tnEvcIndex tnEvcEceId
ifIndex tnProducts

Defined Types

TnEthSoamPmSessionCfgEntry  
SEQUENCE    
  tnEthSoamPmSessionCfgId Integer32
  tnEthSoamPmSessionCfgType INTEGER
  tnEthSoamPmSessionCfgSessionMode INTEGER
  tnEthSoamPmSessionCfgStorageMode INTEGER
  tnEthSoamPmSessionCfgInterval Unsigned32

TnEthSoamPmTransferCfgEntry  
SEQUENCE    
  tnEthSoamPmTransferCfgId Integer32
  tnEthSoamPmTransferCfgMode INTEGER
  tnEthSoamPmTransferCfgSchedHrs BITS
  tnEthSoamPmTransferCfgSchedMins BITS
  tnEthSoamPmTransferCfgSchedOffset Integer32
  tnEthSoamPmTransferCfgRandomOffset Integer32
  tnEthSoamPmTransferCfgServerAddr OCTET STRING
  tnEthSoamPmTransferCfgIntervalMode INTEGER
  tnEthSoamPmTransferCfgIntervalNum Integer32
  tnEthSoamPmTransferCfgIncludeIncomplete INTEGER

TnEthSoamPmLmHistoryStatsEntry  
SEQUENCE    
  tnEthSoamPmLmHistoryStatsIndex Unsigned32
  tnEthSoamPmLmHistoryStatsEndTime DateAndTime
  tnEthSoamPmLmHistoryStatsElapsedTime TimeInterval
  tnEthSoamPmLmHistoryStatsTxCount Counter64
  tnEthSoamPmLmHistoryStatsRxCount Counter64
  tnEthSoamPmLmHistoryStatsNELossCount Counter64
  tnEthSoamPmLmHistoryStatsFELossCount Counter64
  tnEthSoamPmLmHistoryStatsNEAvgFlr Unsigned32
  tnEthSoamPmLmHistoryStatsFEAvgFlr Unsigned32

TnEthSoamPmDmHistoryStatsEntry  
SEQUENCE    
  tnEthSoamPmDmHistoryStatsIndex Unsigned32
  tnEthSoamPmDmHistoryStatsEndTime DateAndTime
  tnEthSoamPmDmHistoryStatsElapsedTime TimeInterval
  tnEthSoamPmDmHistoryStatsTxCount Counter64
  tnEthSoamPmDmHistoryStatsRxCount Counter64
  tnEthSoamPmDmHistoryStatsFNAvgFrameDelay Unsigned32
  tnEthSoamPmDmHistoryStatsFNAvgFrameDV Unsigned32
  tnEthSoamPmDmHistoryStatsFNMinFrameDelay Unsigned32
  tnEthSoamPmDmHistoryStatsFNMaxFrameDelay Unsigned32
  tnEthSoamPmDmHistoryStatsNFAvgFrameDelay Unsigned32
  tnEthSoamPmDmHistoryStatsNFAvgFrameDV Unsigned32
  tnEthSoamPmDmHistoryStatsNFMinFrameDelay Unsigned32
  tnEthSoamPmDmHistoryStatsNFMaxFrameDelay Unsigned32
  tnEthSoamPmDmHistoryStatsTwoWayAvgFrameDelay Unsigned32
  tnEthSoamPmDmHistoryStatsTwoWayAvgFrameDV Unsigned32
  tnEthSoamPmDmHistoryStatsTwoWayMinFrameDelay Unsigned32
  tnEthSoamPmDmHistoryStatsTwoWayMaxFrameDelay Unsigned32

TnEthSoamPmEvcHistoryStatsEntry  
SEQUENCE    
  tnEthSoamPmEvcHistoryStatsIndex Unsigned32
  tnEthSoamPmEvcHistoryStatsEndTime DateAndTime
  tnEthSoamPmEvcHistoryStatsElapsedTime TimeInterval
  tnEthSoamPmEvcHistoryStatsGreenFramesTx Counter64
  tnEthSoamPmEvcHistoryStatsGreenFramesRx Counter64
  tnEthSoamPmEvcHistoryStatsGreenBytesTx Counter64
  tnEthSoamPmEvcHistoryStatsGreenBytesRx Counter64
  tnEthSoamPmEvcHistoryStatsYellowFramesTx Counter64
  tnEthSoamPmEvcHistoryStatsYellowFramesRx Counter64
  tnEthSoamPmEvcHistoryStatsYellowBytesTx Counter64
  tnEthSoamPmEvcHistoryStatsYellowBytesRx Counter64
  tnEthSoamPmEvcHistoryStatsRedFramesRx Counter64
  tnEthSoamPmEvcHistoryStatsRedBytesRx Counter64
  tnEthSoamPmEvcHistoryStatsDiscardFramesTx Counter64
  tnEthSoamPmEvcHistoryStatsDiscardFramesRx Counter64
  tnEthSoamPmEvcHistoryStatsDiscardBytesTx Counter64
  tnEthSoamPmEvcHistoryStatsDiscardBytesRx Counter64

TnEthSoamPmEceHistoryStatsEntry  
SEQUENCE    
  tnEthSoamPmEceHistoryStatsIndex Unsigned32
  tnEthSoamPmEceHistoryStatsEndTime DateAndTime
  tnEthSoamPmEceHistoryStatsElapsedTime TimeInterval
  tnEthSoamPmEceHistoryStatsGreenFramesTx Counter64
  tnEthSoamPmEceHistoryStatsGreenFramesRx Counter64
  tnEthSoamPmEceHistoryStatsGreenBytesTx Counter64
  tnEthSoamPmEceHistoryStatsGreenBytesRx Counter64
  tnEthSoamPmEceHistoryStatsYellowFramesTx Counter64
  tnEthSoamPmEceHistoryStatsYellowFramesRx Counter64
  tnEthSoamPmEceHistoryStatsYellowBytesTx Counter64
  tnEthSoamPmEceHistoryStatsYellowBytesRx Counter64
  tnEthSoamPmEceHistoryStatsRedFramesRx Counter64
  tnEthSoamPmEceHistoryStatsRedBytesRx Counter64
  tnEthSoamPmEceHistoryStatsDiscardFramesTx Counter64
  tnEthSoamPmEceHistoryStatsDiscardFramesRx Counter64
  tnEthSoamPmEceHistoryStatsDiscardBytesTx Counter64
  tnEthSoamPmEceHistoryStatsDiscardBytesRx Counter64

Defined Values

tnEthSoamPmMIB 1.3.6.1.4.1.868.2.5.143
This MIB module contains the Performance Monitoring objects for the management of Ethernet Services Operations, Administration and Maintenance in TN platform products.
MODULE-IDENTITY    

tnEthSoamPmNotifications 1.3.6.1.4.1.868.2.5.143.0
OBJECT IDENTIFIER    

tnEthSoamPmCfgMIBObjects 1.3.6.1.4.1.868.2.5.143.1
OBJECT IDENTIFIER    

tnEthSoamPmStatsMIBObjects 1.3.6.1.4.1.868.2.5.143.2
OBJECT IDENTIFIER    

tnEthSoamPmNotificationMIBObjects 1.3.6.1.4.1.868.2.5.143.3
OBJECT IDENTIFIER    

tnEthSoamPmSessionCfgObjects 1.3.6.1.4.1.868.2.5.143.1.1
OBJECT IDENTIFIER    

tnEthSoamPmTransferCfgObjects 1.3.6.1.4.1.868.2.5.143.1.2
OBJECT IDENTIFIER    

tnEthSoamPmLmStatsObjects 1.3.6.1.4.1.868.2.5.143.2.1
OBJECT IDENTIFIER    

tnEthSoamPmDmStatsObjects 1.3.6.1.4.1.868.2.5.143.2.2
OBJECT IDENTIFIER    

tnEthSoamPmEvcStatsObjects 1.3.6.1.4.1.868.2.5.143.2.3
OBJECT IDENTIFIER    

tnEthSoamPmEceStatsObjects 1.3.6.1.4.1.868.2.5.143.2.4
OBJECT IDENTIFIER    

tnEthSoamPmSessionCfgTable 1.3.6.1.4.1.868.2.5.143.1.1.1
This table configure the Performance monitor session and storage settings.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TnEthSoamPmSessionCfgEntry

tnEthSoamPmSessionCfgEntry 1.3.6.1.4.1.868.2.5.143.1.1.1.1
Entries in this table configure the Performance monitor session and storage settings.
Status: current Access: not-accessible
OBJECT-TYPE    
  TnEthSoamPmSessionCfgEntry  

tnEthSoamPmSessionCfgId 1.3.6.1.4.1.868.2.5.143.1.1.1.1.1
An index to the Performce Monitor Configuration table which indicates the specific session to be configured.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..65535  

tnEthSoamPmSessionCfgType 1.3.6.1.4.1.868.2.5.143.1.1.1.1.2
The Perfmonce Monitor session type: - lossMeasurement SOAM PM loss measurement collect and storage. - delayMeasurement SOAM PM delay measurement collect and storage. - evc EVC Port based counters collect and storage. - ece ECE Port based counters collect and storage. - port Port based counters collect and storage.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER lossMeasurement(1), delayMeasurement(2), evc(3), ece(4), dmBinning(5)  

tnEthSoamPmSessionCfgSessionMode 1.3.6.1.4.1.868.2.5.143.1.1.1.1.3
Enable or disable this performance monitor session.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

tnEthSoamPmSessionCfgStorageMode 1.3.6.1.4.1.868.2.5.143.1.1.1.1.4
Enable or disable the performance monitor local storage.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

tnEthSoamPmSessionCfgInterval 1.3.6.1.4.1.868.2.5.143.1.1.1.1.5
The measurement interval for the performance monitor. The interval unit is minute, the valid range is system defined. A typical range would be 1 - 60(mins)
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

tnEthSoamPmTransferCfgTable 1.3.6.1.4.1.868.2.5.143.1.2.1
This table configure the Performance Monitor data transfer related settings.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TnEthSoamPmTransferCfgEntry

tnEthSoamPmTransferCfgEntry 1.3.6.1.4.1.868.2.5.143.1.2.1.1
Entry in this table configure the Performance Monitor data transfer related settings.
Status: current Access: not-accessible
OBJECT-TYPE    
  TnEthSoamPmTransferCfgEntry  

tnEthSoamPmTransferCfgId 1.3.6.1.4.1.868.2.5.143.1.2.1.1.1
Indicate the performance monitor data transfer table index.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..65535  

tnEthSoamPmTransferCfgMode 1.3.6.1.4.1.868.2.5.143.1.2.1.1.2
Configure the performance monitor transfer mode per system. Possible modes are: - Enabled: Transfer data is enabled. - Disabled: Transfer data is disabled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

tnEthSoamPmTransferCfgSchedHrs 1.3.6.1.4.1.868.2.5.143.1.2.1.1.3
It must be possible to select one or more of the 24 hours in a day, when PM data transfer will happen. 00:00 01:00 02:00 03:00 04:00 05:00 06:00 07:00 08:00 09:00 10:00 11:00 12:00 13:00 14:00 15:00 16:00 17:00 18:00 19:00 20:00 21:00 22:00 23:00 Default is none selected.
Status: current Access: read-write
OBJECT-TYPE    
  BITS hrs00(0), hrs01(1), hrs02(2), hrs03(3), hrs04(4), hrs05(5), hrs06(6), hrs07(7), hrs08(8), hrs09(9), hrs10(10), hrs11(11), hrs12(12), hrs13(13), hrs14(14), hrs15(15), hrs16(16), hrs17(17), hrs18(18), hrs19(19), hrs20(20), hrs21(21), hrs22(22), hrs23(23)  

tnEthSoamPmTransferCfgSchedMins 1.3.6.1.4.1.868.2.5.143.1.2.1.1.4
It must be possible to select one or more of the four 15 min. in an hour, when PM data transfer will happen. 00:00 00:15 00:30 00:45 Default is none selected.
Status: current Access: read-write
OBJECT-TYPE    
  BITS mins00(0), mins15(1), mins30(2), mins45(3)  

tnEthSoamPmTransferCfgSchedOffset 1.3.6.1.4.1.868.2.5.143.1.2.1.1.5
It must be possible to configure a fixed offset that is added to the scheduled transfer time. The rage is 0-15 minutes. Default is 0 min. The sum of Scheduled Fixed Offset and Scheduled Random Offset must not exceed 15 min.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

tnEthSoamPmTransferCfgRandomOffset 1.3.6.1.4.1.868.2.5.143.1.2.1.1.6
It must be possible to configure a random offset that is added to the scheduled transfer time. The offset added to the scheduled transfer time must be a random value in the range 0-Scheduled Offset. The range is 0-900 seconds. Default is 0 sec. The sum of Scheduled Offset and Random Offset must not exceed 15 min.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

tnEthSoamPmTransferCfgServerAddr 1.3.6.1.4.1.868.2.5.143.1.2.1.1.7
It must be possible to configure the full URL of the server and the corresponding directory (if any) for uploading. The supported protocols are HTTP and TFTP. To enable HTTP by entering http:// followed by the domain name or IP address. To enable TFTP by entering tftp:// followed by the domain name or IP address. The format is: protocol://host_address:port_num/folder_name while port_num and folder_name are optional. For example, 'tftp://192.251.1.1:55/' will upload the counter files to the tftp root directory in 192.251.1.1 at port 55 via tftp.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..63)  

tnEthSoamPmTransferCfgIntervalMode 1.3.6.1.4.1.868.2.5.143.1.2.1.1.8
There are three supported interval modes. All available intervals: To enable transfer of all completed Measurement Intervals. New intervals since last transfer: To enable transfer of only completed Measurement Intervals since last transfer. Fixed number of intervals: To enable transfer of all completed Measurement Intervals up to the configured number.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER allAvailableIntervals(1), newIntervalsSinceLastTransfer(2), fixedNumberOfIntervals(3)  

tnEthSoamPmTransferCfgIntervalNum 1.3.6.1.4.1.868.2.5.143.1.2.1.1.9
When Fixed number of interval selected, this value is used to determine the number of intervals to send. The range is 1 to 96 Intervals.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..96  

tnEthSoamPmTransferCfgIncludeIncomplete 1.3.6.1.4.1.868.2.5.143.1.2.1.1.10
When this option is checked, PM data transfer will include the suspended (incomplete) transmission. - Enabled: PM data transfer will include the suspended (incomplete) transmission. - Disabled: PM data transfer will not include the suspended (incomplete) transmission.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

tnEthSoamPmLmHistoryStatsTable 1.3.6.1.4.1.868.2.5.143.2.1.1
This table contains the results for availability history Measurement Intervals in a SOAM Loss Measurement session. Rows of this table object are created automatically by the SNMP Agent when the Loss Measurement session is running and a Measurement Interval is completed. Each row in the table represents the history statistics for a Loss Measurement session availability Measurement Interval for the defined MEP. 32 completed Measurement Intervals are to be supported. If there are at least 32 rows in the table and a new Measurement Interval completes and a new row is to be added to the table, the oldest completed Measurement Interval is deleted (row deletion). The rows and objects in this table are to be persistent upon reboot or restart of a device if tnEthSoamPmSessionCfgStorageMode is enabled for tnEthSoamPmSessionCfgType of 'lossMeasurement'.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TnEthSoamPmLmHistoryStatsEntry

tnEthSoamPmLmHistoryStatsEntry 1.3.6.1.4.1.868.2.5.143.2.1.1.1
The conceptual row of tnEthSoamPmLmHistoryStatsTable
Status: current Access: not-accessible
OBJECT-TYPE    
  TnEthSoamPmLmHistoryStatsEntry  

tnEthSoamPmLmHistoryStatsIndex 1.3.6.1.4.1.868.2.5.143.2.1.1.1.1
The index for the Measurement Interval within this PM session. Measurement Interval indexes are assigned sequentially by the device. The first Measurement Interval that occurs after the session is started is assigned index 1. Referential integrity is necessary, i.e., the index needs to be persistent upon a reboot or restart of a device. The index is never reused while this session is active until it wraps to zero. The index value keeps increasing up to that time.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 1..4294967295  

tnEthSoamPmLmHistoryStatsEndTime 1.3.6.1.4.1.868.2.5.143.2.1.1.1.2
The time that this Measurement Interval ended.
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

tnEthSoamPmLmHistoryStatsElapsedTime 1.3.6.1.4.1.868.2.5.143.2.1.1.1.3
The time that this Measurement Interval has been running, in 0.01 seconds.
Status: current Access: read-only
OBJECT-TYPE    
  TimeInterval  

tnEthSoamPmLmHistoryStatsTxCount 1.3.6.1.4.1.868.2.5.143.2.1.1.1.4
This object contains the number of outbound frames in this MEP for this Measurement Interval.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

tnEthSoamPmLmHistoryStatsRxCount 1.3.6.1.4.1.868.2.5.143.2.1.1.1.5
This object contains the number of inbound frames in this MEP for this Measurement Interval.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

tnEthSoamPmLmHistoryStatsNELossCount 1.3.6.1.4.1.868.2.5.143.2.1.1.1.6
This object contains the number of frames lossed in the near end of this MEP for this Measurement Interval.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

tnEthSoamPmLmHistoryStatsFELossCount 1.3.6.1.4.1.868.2.5.143.2.1.1.1.7
This object contains the number of frames lossed in the far end of this MEP for this Measurement Interval.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

tnEthSoamPmLmHistoryStatsNEAvgFlr 1.3.6.1.4.1.868.2.5.143.2.1.1.1.8
This object contains the average frame loss ratio in the near end of this MEP calculated for this Measurement Interval. The value is a ratio that is expressed as a percent with a value of 0 (ratio 0.00) through 100000 (ratio 1.00). Units are in milli-percent, where 1 indicates 0.001 percent.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..100000  

tnEthSoamPmLmHistoryStatsFEAvgFlr 1.3.6.1.4.1.868.2.5.143.2.1.1.1.9
This object contains the average frame loss ratio in the far end of this MEP calculated for this Measurement Interval. The value is a ratio that is expressed as a percent with a value of 0 (ratio 0.00) through 100000 (ratio 1.00). Units are in milli-percent, where 1 indicates 0.001 percent.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..100000  

tnEthSoamPmDmHistoryStatsTable 1.3.6.1.4.1.868.2.5.143.2.2.1
This table contains the results for history Measurement Intervals in a SOAM Delay Measurement session. Rows of this table are created automatically by the SNMP Agent when the Delay Measurement session is running and a Measurement Interval is completed. Each row in the table represents the Measurement Interval history statistics for a Delay Measurement session for the defined MEP. Each row in the table represents the history statistics for a delay Measurement session availability Measurement Interval for the defined MEP. 32 completed Measurement Intervals are to be supported. If there are at least 32 rows in the table and a new Measurement Interval completes and a new row is to be added to the table, the oldest completed Measurement Interval is deleted (row deletion). The rows and objects in this table are to be persistent upon reboot or restart of a device if tnEthSoamPmSessionCfgStorageMode is enabled for tnEthSoamPmSessionCfgType of 'delayMeasurement'.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TnEthSoamPmDmHistoryStatsEntry

tnEthSoamPmDmHistoryStatsEntry 1.3.6.1.4.1.868.2.5.143.2.2.1.1
The conceptual row of tnEthSoamPmDmHistoryStatsTable
Status: current Access: not-accessible
OBJECT-TYPE    
  TnEthSoamPmDmHistoryStatsEntry  

tnEthSoamPmDmHistoryStatsIndex 1.3.6.1.4.1.868.2.5.143.2.2.1.1.1
The index for the Measurement Interval within this PM session. Measurement Interval indexes are assigned sequentially by the device. The first Measurement Interval that occurs after the session is started is assigned index 1. Referential integrity is necessary, i.e., the index needs to be persistent upon a reboot or restart of a device. The index is never reused while this session is active until it wraps to zero. The index value keeps increasing up to that time.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 1..4294967295  

tnEthSoamPmDmHistoryStatsEndTime 1.3.6.1.4.1.868.2.5.143.2.2.1.1.2
The time that this Measurement Interval ended.
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

tnEthSoamPmDmHistoryStatsElapsedTime 1.3.6.1.4.1.868.2.5.143.2.2.1.1.3
The time that this Measurement Interval has been running, in 0.01 seconds.
Status: current Access: read-only
OBJECT-TYPE    
  TimeInterval  

tnEthSoamPmDmHistoryStatsTxCount 1.3.6.1.4.1.868.2.5.143.2.2.1.1.4
This object contains the number of frames transmitted in this MEP for this Measurement Interval.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

tnEthSoamPmDmHistoryStatsRxCount 1.3.6.1.4.1.868.2.5.143.2.2.1.1.5
This object contains the number of frames received in this MEP for this Measurement Interval.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

tnEthSoamPmDmHistoryStatsFNAvgFrameDelay 1.3.6.1.4.1.868.2.5.143.2.2.1.1.6
This object contains the average one-way frame delay in the far end to near end direction calculated by this MEP for this Measurement Interval.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

tnEthSoamPmDmHistoryStatsFNAvgFrameDV 1.3.6.1.4.1.868.2.5.143.2.2.1.1.7
This object contains the average one-way inter-frame delay interval in the far end to near end direction calculated by this MEP for this Measurement Interval.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

tnEthSoamPmDmHistoryStatsFNMinFrameDelay 1.3.6.1.4.1.868.2.5.143.2.2.1.1.8
This object contains the minimum one-way inter-frame delay interval in the far end to near end direction calculated by this MEP for this Measurement Interval.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

tnEthSoamPmDmHistoryStatsFNMaxFrameDelay 1.3.6.1.4.1.868.2.5.143.2.2.1.1.9
This object contains the maximum one-way inter-frame delay interval in the far end to near end direction calculated by this MEP for this Measurement Interval.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

tnEthSoamPmDmHistoryStatsNFAvgFrameDelay 1.3.6.1.4.1.868.2.5.143.2.2.1.1.10
This object contains the average one-way frame delay in the near end to far end direction calculated by this MEP for this Measurement Interval.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

tnEthSoamPmDmHistoryStatsNFAvgFrameDV 1.3.6.1.4.1.868.2.5.143.2.2.1.1.11
This object contains the average one-way inter-frame delay interval in the near end to far end direction calculated by this MEP for this Measurement Interval.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

tnEthSoamPmDmHistoryStatsNFMinFrameDelay 1.3.6.1.4.1.868.2.5.143.2.2.1.1.12
This object contains the minimum one-way inter-frame delay interval in the near end to far end direction calculated by this MEP for this Measurement Interval.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

tnEthSoamPmDmHistoryStatsNFMaxFrameDelay 1.3.6.1.4.1.868.2.5.143.2.2.1.1.13
This object contains the maximum one-way inter-frame delay interval in the near end to far end direction calculated by this MEP for this Measurement Interval.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

tnEthSoamPmDmHistoryStatsTwoWayAvgFrameDelay 1.3.6.1.4.1.868.2.5.143.2.2.1.1.14
This object contains the average two-way inter-frame delay interval direction calculated by this MEP for this Measurement Interval.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

tnEthSoamPmDmHistoryStatsTwoWayAvgFrameDV 1.3.6.1.4.1.868.2.5.143.2.2.1.1.15
This object contains the average two-way inter-frame delay interval calculated by this MEP for this Measurement Interval.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

tnEthSoamPmDmHistoryStatsTwoWayMinFrameDelay 1.3.6.1.4.1.868.2.5.143.2.2.1.1.16
This object contains the minimum two-way inter-frame delay interval calculated by this MEP for this Measurement Interval.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

tnEthSoamPmDmHistoryStatsTwoWayMaxFrameDelay 1.3.6.1.4.1.868.2.5.143.2.2.1.1.17
This object contains the maximum two-way inter-frame delay interval calculated by this MEP for this Measurement Interval.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

tnEthSoamPmEvcHistoryStatsTable 1.3.6.1.4.1.868.2.5.143.2.3.1
This table contains the results for history Measurement Intervals in a SOAM EVC Measurement session. Rows of this table object are created automatically by the SNMP Agent when the EVC Measurement session is running and a Measurement Interval is completed. Each row in the table represents the history statistics for a EVC Measurement session availability Measurement Interval for the defined EVC. 32 completed Measurement Intervals are to be supported. If there are at least 32 rows in the table and a new Measurement Interval completes and a new row is to be added to the table, the oldest completed Measurement Interval is deleted (row deletion). The rows and objects in this table are to be persistent upon reboot or restart of a device if tnEthSoamPmSessionCfgStorageMode is enabled for tnEthSoamPmSessionCfgType of 'evc'.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TnEthSoamPmEvcHistoryStatsEntry

tnEthSoamPmEvcHistoryStatsEntry 1.3.6.1.4.1.868.2.5.143.2.3.1.1
The conceptual row of tnEthSoamPmEvcHistoryStatsTable
Status: current Access: not-accessible
OBJECT-TYPE    
  TnEthSoamPmEvcHistoryStatsEntry  

tnEthSoamPmEvcHistoryStatsIndex 1.3.6.1.4.1.868.2.5.143.2.3.1.1.1
The index for the Measurement Interval within this PM session. Measurement Interval indexes are assigned sequentially by the device. The first Measurement Interval that occurs after the session is started is assigned index 1. Referential integrity is necessary, i.e., the index needs to be persistent upon a reboot or restart of a device. The index is never reused while this session is active until it wraps to zero. The index value keeps increasing up to that time.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 1..4294967295  

tnEthSoamPmEvcHistoryStatsEndTime 1.3.6.1.4.1.868.2.5.143.2.3.1.1.2
The time that this Measurement Interval ended.
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

tnEthSoamPmEvcHistoryStatsElapsedTime 1.3.6.1.4.1.868.2.5.143.2.3.1.1.3
The time that this Measurement Interval has been running, in 0.01 seconds.
Status: current Access: read-only
OBJECT-TYPE    
  TimeInterval  

tnEthSoamPmEvcHistoryStatsGreenFramesTx 1.3.6.1.4.1.868.2.5.143.2.3.1.1.4
This object contains the number of outbound frames within the CIR / CBS compliance level in this EVC for this Measurement Interval.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

tnEthSoamPmEvcHistoryStatsGreenFramesRx 1.3.6.1.4.1.868.2.5.143.2.3.1.1.5
This object contains the number of inbound frames within the CIR / CBS compliance level in this EVC for this Measurement Interval.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

tnEthSoamPmEvcHistoryStatsGreenBytesTx 1.3.6.1.4.1.868.2.5.143.2.3.1.1.6
This object contains the number of outbound bytes, where frames are within the CIR / CBS compliance level in this EVC for this Measurement Interval.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

tnEthSoamPmEvcHistoryStatsGreenBytesRx 1.3.6.1.4.1.868.2.5.143.2.3.1.1.7
This object contains the number of inbound bytes, where frames are within the CIR / CBS compliance level in this EVC for this Measurement Interval.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

tnEthSoamPmEvcHistoryStatsYellowFramesTx 1.3.6.1.4.1.868.2.5.143.2.3.1.1.8
This object contains the number of outbound frames exceeding the CIR/CBS but within the EIR/EBS in this EVC for this Measurement Interval.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

tnEthSoamPmEvcHistoryStatsYellowFramesRx 1.3.6.1.4.1.868.2.5.143.2.3.1.1.9
This object contains the number of inbound frames exceeding the CIR/CBS but within the EIR/EBS in this EVC for this Measurement Interval.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

tnEthSoamPmEvcHistoryStatsYellowBytesTx 1.3.6.1.4.1.868.2.5.143.2.3.1.1.10
This object contains the number of outbound bytes, where frames exceed the CIR/CBS but are within the EIR/EBS in this EVC for this Measurement Interval.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

tnEthSoamPmEvcHistoryStatsYellowBytesRx 1.3.6.1.4.1.868.2.5.143.2.3.1.1.11
This object contains the number of inbound bytes, where frames exceed the CIR/CBS but are within the EIR/EBS in this EVC for this Measurement Interval.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

tnEthSoamPmEvcHistoryStatsRedFramesRx 1.3.6.1.4.1.868.2.5.143.2.3.1.1.12
This object contains the number of inbound frames not conforming to either the CIR/CBS or the EIR/EBS in this EVC for this Measurement Interval.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

tnEthSoamPmEvcHistoryStatsRedBytesRx 1.3.6.1.4.1.868.2.5.143.2.3.1.1.13
This object contains the number of inbound bytes, where frames do not conform to either the CIR/CBS or the EIR/EBS in this EVC for this Measurement Interval.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

tnEthSoamPmEvcHistoryStatsDiscardFramesTx 1.3.6.1.4.1.868.2.5.143.2.3.1.1.14
This object contains the number of outbound frames which were chosen to be discarded in this EVC for this Measurement Interval.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

tnEthSoamPmEvcHistoryStatsDiscardFramesRx 1.3.6.1.4.1.868.2.5.143.2.3.1.1.15
This object contains the number of inbound frames which were chosen to be discarded in this EVC for this Measurement Interval.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

tnEthSoamPmEvcHistoryStatsDiscardBytesTx 1.3.6.1.4.1.868.2.5.143.2.3.1.1.16
This object contains the number of outbound bytes which were chosen to be discarded in this EVC for this Measurement Interval.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

tnEthSoamPmEvcHistoryStatsDiscardBytesRx 1.3.6.1.4.1.868.2.5.143.2.3.1.1.17
This object contains the number of inbound bytes which were chosen to be discarded in this EVC for this Measurement Interval.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

tnEthSoamPmEceHistoryStatsTable 1.3.6.1.4.1.868.2.5.143.2.4.1
This table contains the results for history Measurement Intervals in a SOAM EVC Extention (ECE) Measurement session. It provides port statistics for the UNI ports of EVC. Rows of this table object are created automatically by the SNMP Agent when the ECE Measurement session is running and a Measurement Interval is completed. Each row in the table represents the history statistics for a ECE Measurement session availability Measurement Interval for the defined ECE. 32 completed Measurement Intervals are to be supported. If there are at least 32 rows in the table and a new Measurement Interval completes and a new row is to be added to the table, the oldest completed Measurement Interval is deleted (row deletion). The rows and objects in this table are to be persistent upon reboot or restart of a device if tnEthSoamPmSessionCfgStorageMode is enabled for tnEthSoamPmSessionCfgType of 'ece'
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TnEthSoamPmEceHistoryStatsEntry

tnEthSoamPmEceHistoryStatsEntry 1.3.6.1.4.1.868.2.5.143.2.4.1.1
The conceptual row of tnEthSoamPmEceHistoryStatsTable
Status: current Access: not-accessible
OBJECT-TYPE    
  TnEthSoamPmEceHistoryStatsEntry  

tnEthSoamPmEceHistoryStatsIndex 1.3.6.1.4.1.868.2.5.143.2.4.1.1.1
The index for the Measurement Interval within this PM session. Measurement Interval indexes are assigned sequentially by the device. The first Measurement Interval that occurs after the session is started is assigned index 1. Referential integrity is necessary, i.e., the index needs to be persistent upon a reboot or restart of a device. The index is never reused while this session is active until it wraps to zero. The index value keeps increasing up to that time.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 1..4294967295  

tnEthSoamPmEceHistoryStatsEndTime 1.3.6.1.4.1.868.2.5.143.2.4.1.1.2
The time that this Measurement Interval ended.
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

tnEthSoamPmEceHistoryStatsElapsedTime 1.3.6.1.4.1.868.2.5.143.2.4.1.1.3
The time that this Measurement Interval has been running, in 0.01 seconds.
Status: current Access: read-only
OBJECT-TYPE    
  TimeInterval  

tnEthSoamPmEceHistoryStatsGreenFramesTx 1.3.6.1.4.1.868.2.5.143.2.4.1.1.4
This object contains the number of outbound frames within the CIR / CBS compliance level in this ECE for this Measurement Interval.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

tnEthSoamPmEceHistoryStatsGreenFramesRx 1.3.6.1.4.1.868.2.5.143.2.4.1.1.5
This object contains the number of inbound frames within the CIR / CBS compliance level in this ECE for this Measurement Interval.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

tnEthSoamPmEceHistoryStatsGreenBytesTx 1.3.6.1.4.1.868.2.5.143.2.4.1.1.6
This object contains the number of outbound bytes, where frames are within the CIR / CBS compliance level in this ECE for this Measurement Interval.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

tnEthSoamPmEceHistoryStatsGreenBytesRx 1.3.6.1.4.1.868.2.5.143.2.4.1.1.7
This object contains the number of inbound bytes, where frames are within the CIR / CBS compliance level in this ECE for this Measurement Interval.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

tnEthSoamPmEceHistoryStatsYellowFramesTx 1.3.6.1.4.1.868.2.5.143.2.4.1.1.8
This object contains the number of outbound frames exceeding the CIR/CBS but within the EIR/EBS in this ECE for this Measurement Interval.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

tnEthSoamPmEceHistoryStatsYellowFramesRx 1.3.6.1.4.1.868.2.5.143.2.4.1.1.9
This object contains the number of inbound frames exceeding the CIR/CBS but within the EIR/EBS in this ECE for this Measurement Interval.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

tnEthSoamPmEceHistoryStatsYellowBytesTx 1.3.6.1.4.1.868.2.5.143.2.4.1.1.10
This object contains the number of outbound bytes, where frames exceed the CIR/CBS but are within the EIR/EBS in this ECE for this Measurement Interval.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

tnEthSoamPmEceHistoryStatsYellowBytesRx 1.3.6.1.4.1.868.2.5.143.2.4.1.1.11
This object contains the number of inbound bytes, where frames exceed the CIR/CBS but are within the EIR/EBS in this ECE for this Measurement Interval.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

tnEthSoamPmEceHistoryStatsRedFramesRx 1.3.6.1.4.1.868.2.5.143.2.4.1.1.12
This object contains the number of inbound frames not conforming to either the CIR/CBS or the EIR/EBS in this ECE for this Measurement Interval.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

tnEthSoamPmEceHistoryStatsRedBytesRx 1.3.6.1.4.1.868.2.5.143.2.4.1.1.13
This object contains the number of inbound bytes, where frames do not conform to either the CIR/CBS or the EIR/EBS in this ECE for this Measurement Interval.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

tnEthSoamPmEceHistoryStatsDiscardFramesTx 1.3.6.1.4.1.868.2.5.143.2.4.1.1.14
This object contains the number of outbound frames which were chosen to be discarded in this ECE for this Measurement Interval.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

tnEthSoamPmEceHistoryStatsDiscardFramesRx 1.3.6.1.4.1.868.2.5.143.2.4.1.1.15
This object contains the number of inbound frames which were chosen to be discarded in this ECE for this Measurement Interval.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

tnEthSoamPmEceHistoryStatsDiscardBytesTx 1.3.6.1.4.1.868.2.5.143.2.4.1.1.16
This object contains the number of outbound bytes which were chosen to be discarded in this ECE for this Measurement Interval.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

tnEthSoamPmEceHistoryStatsDiscardBytesRx 1.3.6.1.4.1.868.2.5.143.2.4.1.1.17
This object contains the number of inbound bytes which were chosen to be discarded in this ECE for this Measurement Interval.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64