TN-EVC-MIB

File: TN-EVC-MIB.mib (86725 bytes)

Imported modules

SNMPv2-SMI	INET-ADDRESS-MIB	SNMPv2-CONF
ENTITY-MIB	SNMPv2-TC	SNMP-FRAMEWORK-MIB
Q-BRIDGE-MIB	IF-MIB	TRANSITION-SMI

Imported symbols

MODULE-IDENTITY	NOTIFICATION-TYPE	OBJECT-TYPE
Unsigned32	Counter64	InetAddress
MODULE-COMPLIANCE	OBJECT-GROUP	NOTIFICATION-GROUP
entPhysicalIndex	TEXTUAL-CONVENTION	TruthValue
RowStatus	MacAddress	StorageType
SnmpAdminString	VlanId	VlanIdOrAny
VlanIdOrNone	VlanIdOrAnyOrNone	PortList
ifIndex	InterfaceIndexOrZero	tnProducts

Defined Types

TnEvcPortEntry
SEQUENCE
	tnEvcPortDEIMode	INTEGER
	tnEvcPortTagMode	INTEGER
	tnEvcPortAddressMode	INTEGER

TnEvcEntry
SEQUENCE
	tnEvcIndex	INTEGER
	tnEvcNNIPortlist	PortList
	tnEvcVid	VlanIdOrAny
	tnEvcIVid	VlanIdOrAny
	tnEvcLearning	INTEGER
	tnEvcInnerTagType	INTEGER
	tnEvcInnerVidMode	INTEGER
	tnEvcInnerVid	VlanIdOrAnyOrNone
	tnEvcInnerPCPDEIPreservation	INTEGER
	tnEvcInnerPCP	INTEGER
	tnEvcInnerDEI	INTEGER
	tnEvcOuterVid	VlanIdOrAnyOrNone
	tnEvcStatus	RowStatus
	tnEvcPolicerID	INTEGER
	tnEvcName	OCTET STRING

TnEvcEceEntry
SEQUENCE
	tnEvcEceId	INTEGER
	tnEvcEceNextEceId	INTEGER
	tnEvcEceUNIPortlist	PortList
	tnEvcEceTagType	INTEGER
	tnEvcEceTagVIDFilterType	INTEGER
	tnEvcEceTagVIDFilterVal	VlanIdOrAnyOrNone
	tnEvcEceTagVIDFilterStart	VlanIdOrAnyOrNone
	tnEvcEceTagVIDFilterEnd	VlanIdOrAnyOrNone
	tnEvcEceTagPCP	BITS
	tnEvcEceTagDEI	INTEGER
	tnEvcEceTagFrameType	INTEGER
	tnEvcEceProtoType	INTEGER
	tnEvcEceProtoVal	INTEGER
	tnEvcEceDscpFilterType	INTEGER
	tnEvcEceDscpFilterVal	INTEGER
	tnEvcEceDscpRangeStart	INTEGER
	tnEvcEceDscpRangeEnd	INTEGER
	tnEvcEceSrcPortFilterType	INTEGER
	tnEvcEceSrcPortFilterNo	INTEGER
	tnEvcEceSrcPortRangeStart	INTEGER
	tnEvcEceSrcPortRangeEnd	INTEGER
	tnEvcEceDstPortFilterType	INTEGER
	tnEvcEceDstPortFilterNo	INTEGER
	tnEvcEceDstPortRangeStart	INTEGER
	tnEvcEceDstPortRangeEnd	INTEGER
	tnEvcEceIpv4DipSipFilter	INTEGER
	tnEvcEceIpv4DipSipAddr	InetAddress
	tnEvcEceIpv4DipSipMask	InetAddress
	tnEvcEceIpv4Fragment	INTEGER
	tnEvcEceIpv6DipSipFilter	INTEGER
	tnEvcEceIpv6DipSipAddr	Unsigned32
	tnEvcEceIpv6DipSipMask	Unsigned32
	tnEvcEceOuterMode	INTEGER
	tnEvcEceOuterPCPDEIPreserve	INTEGER
	tnEvcEceOuterPCP	INTEGER
	tnEvcEceOuterDEI	INTEGER
	tnEvcEceActDirection	INTEGER
	tnEvcEceActEvcidFilterType	INTEGER
	tnEvcEceActEvcidVal	INTEGER
	tnEvcEceActTagPopCount	INTEGER
	tnEvcEceActPolicyId	INTEGER
	tnEvcEceActClass	INTEGER
	tnEvcEceDMacSMacFilterType	INTEGER
	tnEvcEceDMacSMacVal	MacAddress
	tnEvcEceDMacType	INTEGER
	tnEvcEceConflict	INTEGER
	tnEvcEceStatus	RowStatus

TnEvcBandwidthProfilesEntry
SEQUENCE
	tnEvcBandwidthProfilesIndex	INTEGER
	tnEvcBandwidthProfilesPolicerMode	INTEGER
	tnEvcBandwidthProfilesCIR	INTEGER
	tnEvcBandwidthProfilesCBS	INTEGER
	tnEvcBandwidthProfilesEIR	INTEGER
	tnEvcBandwidthProfilesEBS	INTEGER
	tnEvcBandwidthProfilesState	INTEGER

TnEvcExtEceEntry
SEQUENCE
	tnEvcEceInnerTagType	INTEGER
	tnEvcEceInnerTagVIDFilterType	INTEGER
	tnEvcEceInnerTagVIDFilterVal	VlanIdOrNone
	tnEvcEceInnerTagVIDFilterStart	VlanIdOrNone
	tnEvcEceInnerTagVIDFilterEnd	VlanIdOrNone
	tnEvcEceInnerTagPCP	BITS
	tnEvcEceInnerTagDEI	INTEGER
	tnEvcEcePolicer	INTEGER
	tnEvcEceOuterVid	VlanIdOrNone
	tnEvcEceNNIInnerTagType	INTEGER
	tnEvcEceInnerVid	VlanIdOrNone
	tnEvcEceInnerPCPDEIPreserve	INTEGER
	tnEvcEceInnerPCP	INTEGER
	tnEvcEceInnerDEI	INTEGER
	tnEvcEceDMacVal	MacAddress
	tnEvcEceOuterPCPMode	INTEGER
	tnEvcEceOuterDEIMode	INTEGER
	tnEvcEceActRuleType	INTEGER
	tnEvcEceActTxLookupType	INTEGER
	tnEvcEceActDropPrecType	INTEGER
	tnEvcEceInnerPcpMode	INTEGER
	tnEvcEceIInnerDeiMode	INTEGER
	tnEvcEceIpv4DipFilter	INTEGER
	tnEvcEceIpv4DipAddr	InetAddress
	tnEvcEceIpv4DipMask	InetAddress
	tnEvcEceIpv6DipFilter	INTEGER
	tnEvcEceIpv6DipAddr	Unsigned32
	tnEvcEceIpv6DipMask	Unsigned32
	tnEvcEceLookup	INTEGER
	tnEvcEceEtypeFilter	INTEGER
	tnEvcEceEtypeValue	Unsigned32
	tnEvcEceEtypeDataFilter	INTEGER
	tnEvcEceEtypeData	Unsigned32
	tnEvcEceEtypeDataMask	Unsigned32
	tnEvcEceLlcDSAPFilter	INTEGER
	tnEvcEceLlcDSAPValue	Unsigned32
	tnEvcEceLlcSSAPFilter	INTEGER
	tnEvcEceLlcSSAPValue	Unsigned32
	tnEvcEceLlcCtrlFilter	INTEGER
	tnEvcEceLlcCtrlValue	Unsigned32
	tnEvcEceLlcDataFilter	INTEGER
	tnEvcEceLlcDataValue	Unsigned32
	tnEvcEceLlcDataMask	Unsigned32
	tnEvcEceSnapOuiFilter	INTEGER
	tnEvcEceSnapOuiValue	Unsigned32
	tnEvcEceSnapPidFilter	INTEGER
	tnEvcEceSnapPidValue	Unsigned32
	tnEvcEceL2cpProtoType	INTEGER

TnEvcStatEntry
SEQUENCE
	tnEvcStatClass	INTEGER
	tnEvcStatGreenFrameRx	Counter64
	tnEvcStatGreenFrameTx	Counter64
	tnEvcStatYellowFrameRx	Counter64
	tnEvcStatYellowFrameTx	Counter64
	tnEvcStatRedFrameRx	Counter64
	tnEvcStatDiscardGreenFrame	Counter64
	tnEvcStatDiscardYellowFrame	Counter64
	tnEvcStatClear	TruthValue

TnEvcExtStatEntry
SEQUENCE
	tnEvcExtStatType	INTEGER
	tnEvcExtStatIndex	INTEGER
	tnEvcExtStatPort	INTEGER
	tnEvcExtStatGreenFrameRx	Counter64
	tnEvcExtStatGreenFrameTx	Counter64
	tnEvcExtStatGreenBytesRx	Counter64
	tnEvcExtStatGreenBytesTx	Counter64
	tnEvcExtStatYellowFrameRx	Counter64
	tnEvcExtStatYellowFrameTx	Counter64
	tnEvcExtStatYellowBytesRx	Counter64
	tnEvcExtStatYellowBytesTx	Counter64
	tnEvcExtStatRedFrameRx	Counter64
	tnEvcExtStatRedBytesRx	Counter64
	tnEvcExtStatDiscardFrameRx	Counter64
	tnEvcExtStatDiscardFrameTx	Counter64
	tnEvcExtStatDiscardBytesRx	Counter64
	tnEvcExtStatDiscardBytesTx	Counter64
	tnEvcExtStatclear	TruthValue

TnEvcL2cpCfgEntry
SEQUENCE
	tnEvcL2cpCfgInterfaceNumber	Unsigned32
	tnEvcL2cpCfgIndex	Unsigned32
	tnEvcL2cpCfgType	INTEGER
	tnEvcL2cpCfgMatchScope	INTEGER
	tnEvcL2cpCfgMacAddress	MacAddress
	tnEvcL2cpCfgProtocol	Unsigned32
	tnEvcL2cpCfgSubType	Unsigned32
	tnEvcL2cpCfgEvcName	OCTET STRING
	tnEvcL2cpCfgValid	INTEGER
	tnEvcL2cpCfgRowStatus	RowStatus

Defined Values

tnEvcMib		1.3.6.1.4.1.868.2.5.106
TBD
MODULE-IDENTITY

tnEvcObjects		1.3.6.1.4.1.868.2.5.106.1
OBJECT IDENTIFIER

tnEvcCfgMgmtGroup		1.3.6.1.4.1.868.2.5.106.1.1
OBJECT IDENTIFIER

tnEvcStatGroup		1.3.6.1.4.1.868.2.5.106.1.2
OBJECT IDENTIFIER

tnEvcL2cpMgmtGroup		1.3.6.1.4.1.868.2.5.106.1.3
OBJECT IDENTIFIER

tnEvcPortTable		1.3.6.1.4.1.868.2.5.106.1.1.1
This table displays and sets current EVC port configurations. This table has a sparse depedent relationship on the ifTable, containing a row for each ifEntry having an ifType of 'ethernetCsmacd' capable of supporting Ethernet services.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		TnEvcPortEntry

tnEvcPortEntry		1.3.6.1.4.1.868.2.5.106.1.1.1.1
This entry represents an EVC port configuration.
Status: current	Access: not-accessible
OBJECT-TYPE
	TnEvcPortEntry

tnEvcPortDEIMode		1.3.6.1.4.1.868.2.5.106.1.1.1.1.1
The DEI mode for an NNI port determines whether frames transmitted on the port will have the DEI field in the outer tag marked based on the colour of the frame. The allowed values are: 'coloured': The DEI is 1 for yellow frames and 0 for green frames. 'fixed': The DEI value is determined by ECE rules.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	coloured(1), fixed(2)

tnEvcPortTagMode		1.3.6.1.4.1.868.2.5.106.1.1.1.1.2
The inner tag type is used to determine whether an inner tag is inserted in frames forwarded to NNI ports. The possible values are: 'inner': An inner tag is not inserted. 'outer': An inner C-tag is inserted.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	inner(1), outer(2)

tnEvcPortAddressMode		1.3.6.1.4.1.868.2.5.106.1.1.1.1.3
The IP/MAC address mode specifying whether the EVC classification must be based on source (SMAC/SIP) or destination (DMAC/DIP) addresses. The allowed values are: 'source': Enable SMAC/SIP matching. 'destination': Enable DMAC/DIP matching.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	source(1), destination(2)

tnEvcTable		1.3.6.1.4.1.868.2.5.106.1.1.2
This table contains the configuration of EVC(Ethernet Virtual Circuit).
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		TnEvcEntry

tnEvcEntry		1.3.6.1.4.1.868.2.5.106.1.1.2.1
This entry represents an EVC. Each entry in this table represents an EVC and can be created or deleted by the management system.
Status: current	Access: not-accessible
OBJECT-TYPE
	TnEvcEntry

tnEvcIndex		1.3.6.1.4.1.868.2.5.106.1.1.2.1.1
The identifier of the EVC.
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER	1..11111

tnEvcNNIPortlist		1.3.6.1.4.1.868.2.5.106.1.1.2.1.2
The list of Network to Network Interfaces for the EVC.
Status: current	Access: read-create
OBJECT-TYPE
	PortList

tnEvcVid		1.3.6.1.4.1.868.2.5.106.1.1.2.1.3
The VLAN ID in the PB network. It may be inserted in a C-tag, S-tag or S-custom tag depending on the NNI port VLAN configuration. The allowed range is from 1 through 4094
Status: current	Access: read-create
OBJECT-TYPE
	VlanIdOrAny

tnEvcIVid		1.3.6.1.4.1.868.2.5.106.1.1.2.1.4
The Internal/classified VLAN ID in the PB network. The allowed range is from 1 through 4094
Status: current	Access: read-create
OBJECT-TYPE
	VlanIdOrAny

tnEvcLearning		1.3.6.1.4.1.868.2.5.106.1.1.2.1.5
The learning mode for the EVC controls whether source MAC addresses are learned for frames matching the EVC. Learning may be disabled if the EVC only includes two UNI/NNI ports. The allowed values are: Enabled: Learning is enabled (MAC addresses are learned). Disabled: Learning is disabled (MAC addresses are not learned).
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

tnEvcInnerTagType		1.3.6.1.4.1.868.2.5.106.1.1.2.1.6
The inner tag type is used to determine whether an inner tag is inserted in frames forwarded to NNI ports. The allowed values are: None: An inner tag is not inserted. cTag: An inner C-tag is inserted. sTag: An inner S-tag is inserted. sCustomTag: An inner tag is inserted and the tag type is determined by the VLAN port configuration of the NNI.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	none(1), cTag(2), sTag(3), sCustomTag(4)

tnEvcInnerVidMode		1.3.6.1.4.1.868.2.5.106.1.1.2.1.7
The inner VID Mode affects the VID in the inner and outer tag. The allowed values are: normal: The VID of the two outer tags aren't swapped. tunnel: The VID of the two outer tags are swapped, so that the VID of the outer tag is taken from the Inner Tag configuration and the VID of the inner tag is the EVC VID. In this mode, the NNI ports are normally configured to do EVC classification based on the inner tag.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	normal(1), tunnel(2)

tnEvcInnerVid		1.3.6.1.4.1.868.2.5.106.1.1.2.1.8
The Inner tag VLAN ID. The allowed range is from 0 through 4094.
Status: current	Access: read-create
OBJECT-TYPE
	VlanIdOrAnyOrNone

tnEvcInnerPCPDEIPreservation		1.3.6.1.4.1.868.2.5.106.1.1.2.1.9
The inner tag PCP and DEI preservation. The allowed values are: Preserved: The inner tag PCP and DEI is preserved. Fixed: The inner tag PCP and DEI is fixed.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	preserved(1), fixed(2)

tnEvcInnerPCP		1.3.6.1.4.1.868.2.5.106.1.1.2.1.10
The inner tag PCP value. The allowed range is from 0 through 7.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	0..7

tnEvcInnerDEI		1.3.6.1.4.1.868.2.5.106.1.1.2.1.11
The inner tag DEI value. The allowed value is 0 or 1.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	0..1

tnEvcOuterVid		1.3.6.1.4.1.868.2.5.106.1.1.2.1.12
The Outer tag VLAN ID. The allowed range is from 0 through 4094.
Status: current	Access: read-create
OBJECT-TYPE
	VlanIdOrAnyOrNone

tnEvcStatus		1.3.6.1.4.1.868.2.5.106.1.1.2.1.13
The status of this conceptual row entry of EVC table. This object isused to manage the creation and deletion of conceptual rows. The status column has six defined values: - 'active', which indicates that the conceptual row is available for use by the managed device; - 'notInService', which indicates that the conceptual row exists in the agent, but is unavailable for use by the managed device (see NOTE below); - 'notReady', which indicates that the conceptual row exists in the agent, but is missing information necessary in order to be available for use by the managed device; - 'createAndGo', which is supplied by a management station wishing to create a new instance of a conceptual row and to have its status automatically set to active, making it available for use by the managed device; - 'createAndWait', which is supplied by a management station wishing to create a new instance of a conceptual row (but not make it available for use by the managed device); and, - 'destroy', which is supplied by a management station wishing to delete all of the instances associated with an existing conceptual row. For a detailed description of this object, please refer to SNMPv2-TC MIB.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

tnEvcPolicerID		1.3.6.1.4.1.868.2.5.106.1.1.2.1.14
The ingress bandwidth profile mode for the EVC. The possible values are: Specific: The allowed range is from 1 through 128. Discard: All received frames are discarded for the EVC. The value is 4094. None: None bandwidth profile for the EVC. The value is 4095.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	1..4095

tnEvcName		1.3.6.1.4.1.868.2.5.106.1.1.2.1.15
EVC Administrative Name.
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(0..127)

tnEvcEceTable		1.3.6.1.4.1.868.2.5.106.1.1.3
This table contains the configuration of EVC control entry.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		TnEvcEceEntry

tnEvcEceEntry		1.3.6.1.4.1.868.2.5.106.1.1.3.1
This entry represents an ECE. The system automatically creates an entry when the system or the EMS/NMS creates a row in the cevcECETable. Likewise, the system automatically destroys an entry when the system or the EMS/NMS destroys the corresponding row in the cevcECETable.
Status: current	Access: not-accessible
OBJECT-TYPE
	TnEvcEceEntry

tnEvcEceId		1.3.6.1.4.1.868.2.5.106.1.1.3.1.1
The identifier of the ECE.
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER	1..11111

tnEvcEceNextEceId		1.3.6.1.4.1.868.2.5.106.1.1.3.1.2
Specify the created ECE is placed before which ECE.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER

tnEvcEceUNIPortlist		1.3.6.1.4.1.868.2.5.106.1.1.3.1.3
The list of User to Network Interfaces for the ECE.
Status: current	Access: read-create
OBJECT-TYPE
	PortList

tnEvcEceTagType		1.3.6.1.4.1.868.2.5.106.1.1.3.1.4
The tag type for the ECE. The possible values are: tagged: The ECE will match tagged frames only. untagged: The ECE will match untagged frames only. any: The ECE will match both tagged and untagged frames.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	tagged(1), untagged(2), any(3)

tnEvcEceTagVIDFilterType		1.3.6.1.4.1.868.2.5.106.1.1.3.1.5
The VLAN ID filter for matching the ECE. It only significant if tag type 'Tagged' is selected. The possible values are: any: No VLAN ID filter is specified. (VLAN ID filter status is 'don't-care'.) specific: If you want to filter a specific VLAN ID value with this ECE, choose this value. A field for entering a specific value appears. range: If you want to filter a specific VLAN ID range filter with this ECE, choose this value. A field for entering a range appears.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	any(1), specific(2), range(3)

tnEvcEceTagVIDFilterVal		1.3.6.1.4.1.868.2.5.106.1.1.3.1.6
When 'Specific' is selected for the VLAN ID filter, you can enter a specific value. The allowed value is from 0 through 4094.
Status: current	Access: read-create
OBJECT-TYPE
	VlanIdOrAnyOrNone

tnEvcEceTagVIDFilterStart		1.3.6.1.4.1.868.2.5.106.1.1.3.1.7
When 'Range' is selected for the VLAN ID filter, you can enter a specific range. The allowed range start is from 0 through 4094.
Status: current	Access: read-create
OBJECT-TYPE
	VlanIdOrAnyOrNone

tnEvcEceTagVIDFilterEnd		1.3.6.1.4.1.868.2.5.106.1.1.3.1.8
When 'Range' is selected for the VLAN ID filter, you can enter a specific range. The allowed range end is from 0 through 4094.
Status: current	Access: read-create
OBJECT-TYPE
	VlanIdOrAnyOrNone

tnEvcEceTagPCP		1.3.6.1.4.1.868.2.5.106.1.1.3.1.9
The PCP value for mataching the ECE. It only significant if tag type 'Tagged' is selected. The possible values are: any: The ECE will match any PCP value(all bits will be set to 1). specific: each bit matchs a specific PCP of ECE(from bit0 to bit7). range: The ECE will match PCP values in the selected range, valid range bit0-bit1, bit2-bit3, bit4-bit5, bit6-bit7, bit0-bit3 or bit4-bit7.
Status: current	Access: read-create
OBJECT-TYPE
	BITS	none(0)

tnEvcEceTagDEI		1.3.6.1.4.1.868.2.5.106.1.1.3.1.10
The DEI value for mataching the ECE. It only significant if tag type 'Tagged' is selected. The allowed value is: 0, 1 or Any.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	any(1), dei0(2), dei1(3)

tnEvcEceTagFrameType		1.3.6.1.4.1.868.2.5.106.1.1.3.1.11
The frame type for the ECE. The possible values are: any: The ECE will match any frame type. etype: The ECE will match Ethernet Type frames only. llc: The ECE will match LLC frames only. snap: The ECE will match SNAP frames only. ipv4: The ECE will match IPv4 frames only. ipv6: The ECE will match IPv6 frames only. l2cp: The ECE will match L2CP frames only.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	any(1), etype(2), llc(3), snap(4), ipv4(5), ipv6(6), l2cp(7)

tnEvcEceProtoType		1.3.6.1.4.1.868.2.5.106.1.1.3.1.12
The IP protocol for matching the ECE. The possible values are: any: No protocol filter is specified. (Protocol filter status is 'don't-care'.) udp: Specify the UDP for matching the ECE. tcp: Specify the TCP for matching the ECE. other: If you want to filter a specific protocol value with this ECE, choose this value. A field for entering a specific value appears.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	any(1), udp(2), tcp(3), other(4)

tnEvcEceProtoVal		1.3.6.1.4.1.868.2.5.106.1.1.3.1.13
When 'Specific' is selected for the protocol filter, you can enter a specific value. The allowed value is from 0 through 255.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	0..255

tnEvcEceDscpFilterType		1.3.6.1.4.1.868.2.5.106.1.1.3.1.14
The DSCP filter for matching the ECE. The possible values are: any: No DSCP filter is specified. (DSCP filter status is 'don't-care'.) specific: If you want to filter a specific DSCP value with this ECE, choose this value. A field for entering a specific value appears. range: If you want to filter a specific DSCP range filter with this ECE, choose this value. A field for entering a range appears.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	any(1), specific(2), range(3)

tnEvcEceDscpFilterVal		1.3.6.1.4.1.868.2.5.106.1.1.3.1.15
When 'Specific' is selected for the DSCP filter, you can enter a specific value. The allowed value is from 0 through 63.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	0..63

tnEvcEceDscpRangeStart		1.3.6.1.4.1.868.2.5.106.1.1.3.1.16
When 'Range' is selected for the DSCP filter, you can enter a specific range. The allowed range start is from 0 through 63.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	0..63

tnEvcEceDscpRangeEnd		1.3.6.1.4.1.868.2.5.106.1.1.3.1.17
When 'Range' is selected for the DSCP filter, you can enter a specific range. The allowed range end is from 0 through 63.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	0..63

tnEvcEceSrcPortFilterType		1.3.6.1.4.1.868.2.5.106.1.1.3.1.18
The TCP/UDP source port for matching the ECE. It only significant if protocol filter 'UDP' or 'TCP' is selected. The possible values are: any: No TCP/UDP source port filter is specified. (Source port filter status is 'don't-care'.) specific: If you want to filter a specific TCP/UDP source port No. with this ECE, choose this value. A field for entering a specific No. appears. range: If you want to filter a specific TCP/UDP source port range filter with this ECE, choose this value. A field for entering a range appears.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	any(1), specific(2), range(3)

tnEvcEceSrcPortFilterNo		1.3.6.1.4.1.868.2.5.106.1.1.3.1.19
When 'Specific' is selected for the source port filter, you can enter a specific value. The allowed value is from 0 through 65535.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	0..65535

tnEvcEceSrcPortRangeStart		1.3.6.1.4.1.868.2.5.106.1.1.3.1.20
When 'Range' is selected for the source port filter, you can enter a specific range. The allowed range start is from 0 through 65535.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	0..65535

tnEvcEceSrcPortRangeEnd		1.3.6.1.4.1.868.2.5.106.1.1.3.1.21
When 'Range' is selected for the source port filter, you can enter a specific range. The allowed range end is from 0 through 65535.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	0..65535

tnEvcEceDstPortFilterType		1.3.6.1.4.1.868.2.5.106.1.1.3.1.22
The TCP/UDP destination port for matching the ECE. It only significant if protocol filter 'UDP' or 'TCP' is selected. The possible values are: any: No TCP/UDP destination port filter is specified. (Source port filter status is 'don't-care'.) specific: If you want to filter a specific TCP/UDP source port No. with this ECE, choose this value. A field for entering a specific No. appears. range: If you want to filter a specific TCP/UDP source port range filter with this ECE, choose this value. A field for entering a range appears.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	any(1), specific(2), range(3)

tnEvcEceDstPortFilterNo		1.3.6.1.4.1.868.2.5.106.1.1.3.1.23
When 'Specific' is selected for the destination port filter, you can enter a specific value. The allowed value is from 0 through 65535.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	0..65535

tnEvcEceDstPortRangeStart		1.3.6.1.4.1.868.2.5.106.1.1.3.1.24
When 'Range' is selected for the destination port filter, you can enter a specific range. The allowed range start is from 0 through 65535.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	0..65535

tnEvcEceDstPortRangeEnd		1.3.6.1.4.1.868.2.5.106.1.1.3.1.25
When 'Range' is selected for the destination port filter, you can enter a specific range. The allowed range end is from 0 through 65535.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	0..65535

tnEvcEceIpv4DipSipFilter		1.3.6.1.4.1.868.2.5.106.1.1.3.1.26
The source/destination IP address for matching the ECE. It depend on by the port address mode, when port address mode is set to 'Source' then the field is used for source address. Similarly when port address mode is set to 'Destination' then the field is used for destination address. The possible values are: Any: No SIP/DIP filter is specified. (SIP/DIP filter status is 'don't-care'.) Host: If you want to filter a specific host address with this ECE, choose this value. A field for entering a host address appears. Network: If you want to filter a specific network address with this ECE, choose this value. A Two fields for entering a specific network address and network mask appears.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	any(1), host(2), network(3)

tnEvcEceIpv4DipSipAddr		1.3.6.1.4.1.868.2.5.106.1.1.3.1.27
When 'Host' or 'Network' is selected for the SIP/DIP filter, you can enter a specific host or network address.
Status: current	Access: read-create
OBJECT-TYPE
	InetAddress

tnEvcEceIpv4DipSipMask		1.3.6.1.4.1.868.2.5.106.1.1.3.1.28
When 'Host' or 'Network' is selected for the SIP/DIP filter, you can enter a specific network mask.
Status: current	Access: read-create
OBJECT-TYPE
	InetAddress

tnEvcEceIpv4Fragment		1.3.6.1.4.1.868.2.5.106.1.1.3.1.29
The IPv4 Fragment for matching the ECE. This involves the settings for the More Fragments (MF) bit and the Fragment Offset (FRAG OFFSET) field for an IPv4 frame. The possible values are: any: The ECE will match any MF bit. fragment: IPv4 frames where the MF bit is set or the FRAG OFFSET field is greater than zero must be able to match this entry. nonfragment: IPv4 frames where the MF bit is set or the FRAG OFFSET field is greater than zero must not be able to match this entry.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	any(1), fragment(2), nonfragment(3)

tnEvcEceIpv6DipSipFilter		1.3.6.1.4.1.868.2.5.106.1.1.3.1.30
The source/destination IP address for matching the ECE. It depend on by the port address mode, when port address mode is set to 'Source' then the field is used for source address. Similarly when port address mode is set to 'Destination' then the field is used for destination address. The possible values are: Any: No SIP/DIP filter is specified. (SIP/DIP filter status is 'don't-care'.) specific: If you want to filter a specific host address with this ECE, choose this value. A field for entering a host address appears.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	any(1), specific(2)

tnEvcEceIpv6DipSipAddr		1.3.6.1.4.1.868.2.5.106.1.1.3.1.31
When 'Host' or 'Network' is selected for the SIP/DIP filter, you can enter a specific host or network address. When 'IPv6' is selected for the Frame Type, the field only supported 32 bits for IPv6 address.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32

tnEvcEceIpv6DipSipMask		1.3.6.1.4.1.868.2.5.106.1.1.3.1.32
When 'Host' or 'Network' is selected for the SIP/DIP filter, you can enter a specific network mask. When 'IPv6' is selected for the Frame Type, the field only supported 32 bits for IPv6 address mask.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32

tnEvcEceOuterMode		1.3.6.1.4.1.868.2.5.106.1.1.3.1.33
The outer tag PCP and DEI preservation for the ECE. The possible values are: enabled: Enable outer tag for nni-to-uni direction for the ECE. disabled: Disable outer tag for nni-to-uni direction for the ECE.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

tnEvcEceOuterPCPDEIPreserve		1.3.6.1.4.1.868.2.5.106.1.1.3.1.34
The outer tag PCP and DEI preservation for the ECE. The possible values are: preserved: The outer tag PCP and DEI is preserved. fixed: The outer tag PCP and DEI is fixed.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	preserved(1), fixed(2)

tnEvcEceOuterPCP		1.3.6.1.4.1.868.2.5.106.1.1.3.1.35
The outer tag PCP value for the ECE. The allowed range is from 0 through 7.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	0..7

tnEvcEceOuterDEI		1.3.6.1.4.1.868.2.5.106.1.1.3.1.36
The outer tag DEI value for the ECE. The allowed value is 0 or 1.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	0..1

tnEvcEceActDirection		1.3.6.1.4.1.868.2.5.106.1.1.3.1.37
The EVCs and ECEs are used to setup flows in one or both directions as determined by the ECE Direction parameter. If the ECE is bidirectional, the ingress rules of the NNI ports will be setup to match the traffic being forwarded to NNI ports. The possible values are: both: Bidirectional. uni2nni: Unidirectional from UNI to NNI. nni2uni: Unidirectional from NNI to UNI.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	both(1), uni2nni(2), nni2uni(3)

tnEvcEceActEvcidFilterType		1.3.6.1.4.1.868.2.5.106.1.1.3.1.38
The outer tag PCP and DEI preservation for the ECE. The possible values are: any: No EVC ID filter is specified. (EVC ID filter status is 'don't-care'.) specific: If you want to filter a specific EVC ID with this ECE, choose this value. A field for entering a specific value appears.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	any(1), specific(2)

tnEvcEceActEvcidVal		1.3.6.1.4.1.868.2.5.106.1.1.3.1.39
When 'Specific' is selected for the VLAN ID filter, you can enter a specific value. The allowed value is from 1 through 128.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	1..128

tnEvcEceActTagPopCount		1.3.6.1.4.1.868.2.5.106.1.1.3.1.40
The ingress tag pop count for the ECE. The allowed range is from 0 through 2.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	0..2

tnEvcEceActPolicyId		1.3.6.1.4.1.868.2.5.106.1.1.3.1.41
The ACL Policy ID for the ECE for matching ACL rules. The allowed range is from 0 through 255.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	0..255

tnEvcEceActClass		1.3.6.1.4.1.868.2.5.106.1.1.3.1.42
The traffic class for the ECE. The allowed range is from 0 through 8 or disabled.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	tc0(1), tc1(2), tc2(3), tc3(4), tc4(5), tc5(6), tc6(7), tc7(8), disabled(9)

tnEvcEceDMacSMacFilterType		1.3.6.1.4.1.868.2.5.106.1.1.3.1.43
The source/destination MAC address for matching the ECE. It depend on by the port address mode, when port address mode is set to 'Source' then the field is used for source MAC address. Similarly when port address mode is set to 'Destination' then the field is used for destination MAC address. The possible values are: any: No SMAC/DMAC filter is specified. (SMAC/DMAC filter status is 'don't-care'.) specific: If you want to filter a specific SMAC/DMAC value with this ECE, choose this value. A field for entering a specific value appears.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	any(1), specific(2)

tnEvcEceDMacSMacVal		1.3.6.1.4.1.868.2.5.106.1.1.3.1.44
When 'Specific' is selected for the SMAC/DMAC filter, you can enter a specific value. The legal format is 'xx-xx-xx-xx-xx-xx' or 'xx.xx.xx.xx.xx.xx' or 'xxxxxxxxxxxx' (x is a hexadecimal digit).
Status: current	Access: read-create
OBJECT-TYPE
	MacAddress

tnEvcEceDMacType		1.3.6.1.4.1.868.2.5.106.1.1.3.1.45
The destination MAC address for matching the ECE. The possible values are: any: No destination MAC address is specified. unicast: Frame must be unicast. multicast: Frame must be multicast. broadcast: Frame must be broadcast. specific: If you want to filter a specific DMAC value with this ECE, choose this value.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	any(1), unicast(2), multicast(3), broadcast(4), specific(5)

tnEvcEceConflict		1.3.6.1.4.1.868.2.5.106.1.1.3.1.46
Indicates the hardware status of the specific ECE. The specific ECE is not applied to the hardware due to hardware limitations.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	yes(1), no(2)

tnEvcEceStatus		1.3.6.1.4.1.868.2.5.106.1.1.3.1.47
The status of this conceptual row entry of ECE table. This object isused to manage the creation and deletion of conceptual rows. The status column has six defined values: - 'active', which indicates that the conceptual row is available for use by the managed device; - 'notInService', which indicates that the conceptual row exists in the agent, but is unavailable for use by the managed device (see NOTE below); - 'notReady', which indicates that the conceptual row exists in the agent, but is missing information necessary in order to be available for use by the managed device; - 'createAndGo', which is supplied by a management station wishing to create a new instance of a conceptual row and to have its status automatically set to active, making it available for use by the managed device; - 'createAndWait', which is supplied by a management station wishing to create a new instance of a conceptual row (but not make it available for use by the managed device); and, - 'destroy', which is supplied by a management station wishing to delete all of the instances associated with an existing conceptual row. For a detailed description of this object, please refer to SNMPv2-TC MIB.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

tnEvcBandwidthProfilesTable		1.3.6.1.4.1.868.2.5.106.1.1.4
This entry displays and sets current EVC ingress bandwidth profile configurations. These policers may be used to limit the traffic received on UNI ports.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		TnEvcBandwidthProfilesEntry

tnEvcBandwidthProfilesEntry		1.3.6.1.4.1.868.2.5.106.1.1.4.1
This entry represents an entry of EVC ingress bandwidth profile configuration.
Status: current	Access: not-accessible
OBJECT-TYPE
	TnEvcBandwidthProfilesEntry

tnEvcBandwidthProfilesIndex		1.3.6.1.4.1.868.2.5.106.1.1.4.1.1
The EVC bandwidth profiles policer index.
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER	1..11111

tnEvcBandwidthProfilesPolicerMode		1.3.6.1.4.1.868.2.5.106.1.1.4.1.2
The colour mode of the bandwidth profile. The allowed values are: coupled: Colour-aware mode with coupling enabled. aware: Colour-aware mode with coupling disabled.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	coupled(1), aware(2), blind(3)

tnEvcBandwidthProfilesCIR		1.3.6.1.4.1.868.2.5.106.1.1.4.1.3
The Committed Information Rate of the bandwidth profile. The allowed range is from 0 through 10,000,000 kilobit per second.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	0..10000000

tnEvcBandwidthProfilesCBS		1.3.6.1.4.1.868.2.5.106.1.1.4.1.4
The Committed Burst Size of the bandwidth profile. The allowed range is from 0 through 100,000 bytes.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	0..100000

tnEvcBandwidthProfilesEIR		1.3.6.1.4.1.868.2.5.106.1.1.4.1.5
The Excess Information Rate of the bandwidth profile. The allowed range is from 0 through 10,000,000 kilobit per second.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	0..10000000

tnEvcBandwidthProfilesEBS		1.3.6.1.4.1.868.2.5.106.1.1.4.1.6
The Excess Burst Size of the bandwidth profile. The allowed range is from 0 through 100,000 bytes.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	0..100000

tnEvcBandwidthProfilesState		1.3.6.1.4.1.868.2.5.106.1.1.4.1.7
The administrative state of the bandwidth profile. The allowed values are: enabled: The bandwidth profile enabled. disabled: The bandwidth profile is disabled.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

tnEvcExtEceTable		1.3.6.1.4.1.868.2.5.106.1.1.5
This table contains the configuration of EVC control entry.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		TnEvcExtEceEntry

tnEvcExtEceEntry		1.3.6.1.4.1.868.2.5.106.1.1.5.1
This entry represents an ECE. The system automatically creates an entry when the system or the EMS/NMS creates a row in the cevcECETable. Likewise, the system automatically destroys an entry when the system or the EMS/NMS destroys the corresponding row in the cevcECETable.
Status: current	Access: not-accessible
OBJECT-TYPE
	TnEvcExtEceEntry

tnEvcEceInnerTagType		1.3.6.1.4.1.868.2.5.106.1.1.5.1.1
The Inner tag type for the ECE. The possible values are: tagged: The ECE will match tagged frames only. untagged: The ECE will match untagged frames only. any: The ECE will match both tagged and untagged frames. If supported: C-Tagged: The ECE will match custom tagged frames only. S-Tagged: The ECE will match service tagged frames only.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	any(1), untagged(2), tagged(3), c-tag(4), s-tag(5)

tnEvcEceInnerTagVIDFilterType		1.3.6.1.4.1.868.2.5.106.1.1.5.1.2
The Inner VLAN ID filter for matching the ECE. It only significant if tag type 'Tagged' is selected. The possible values are: any: No VLAN ID filter is specified. (VLAN ID filter status is 'don't-care'.) specific: If you want to filter a specific VLAN ID value with this ECE, choose this value. A field for entering a specific value appears. range: If you want to filter a specific VLAN ID range filter with this ECE, choose this value. A field for entering a range appears.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	any(1), specific(2), range(3)

tnEvcEceInnerTagVIDFilterVal		1.3.6.1.4.1.868.2.5.106.1.1.5.1.3
When 'Specific' is selected for the Inner VLAN ID filter, you can enter a specific value. The allowed value is from 0 through 4094.
Status: current	Access: read-create
OBJECT-TYPE
	VlanIdOrNone

tnEvcEceInnerTagVIDFilterStart		1.3.6.1.4.1.868.2.5.106.1.1.5.1.4
When 'Range' is selected for the Inner VLAN ID filter, you can enter a specific range. The allowed range start is from 0 through 4094.
Status: current	Access: read-create
OBJECT-TYPE
	VlanIdOrNone

tnEvcEceInnerTagVIDFilterEnd		1.3.6.1.4.1.868.2.5.106.1.1.5.1.5
When 'Range' is selected for the Inner VLAN ID filter, you can enter a specific range. The allowed range end is from 0 through 4094.
Status: current	Access: read-create
OBJECT-TYPE
	VlanIdOrNone

tnEvcEceInnerTagPCP		1.3.6.1.4.1.868.2.5.106.1.1.5.1.6
The PCP value for matching the ECE. It only significant if tag type 'Tagged' is selected. The possible values are: any: The ECE will match any PCP value(all bits will be set to 1). specific: each bit matchs a specific PCP of ECE(from bit0 to bit7). range: The ECE will match PCP values in the selected range, valid range bit0-bit1, bit2-bit3, bit4-bit5, bit6-bit7, bit0-bit3 or bit4-bit7.
Status: current	Access: read-create
OBJECT-TYPE
	BITS	none(0)

tnEvcEceInnerTagDEI		1.3.6.1.4.1.868.2.5.106.1.1.5.1.7
The DEI value for matching the ECE. It only significant if tag type 'Tagged' is selected. The allowed value is: 0, 1 or Any.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	any(1), dei0(2), dei1(3)

tnEvcEcePolicer		1.3.6.1.4.1.868.2.5.106.1.1.5.1.8
The ingress bandwidth profile mode for the EVC. The possible values are: Specific: The allowed range is from 1 through 128. Discard: All received frames are discarded for the EVC. The value is 4094. None: None bandwidth profile for the EVC. The value is 4095. EVC:The bandwidth profile for the specified EVC ID is used. The value is 4096.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	1..4096

tnEvcEceOuterVid		1.3.6.1.4.1.868.2.5.106.1.1.5.1.9
The EVC outer tag VID for UNI ports. The allowed value is from 0 through 4094.
Status: current	Access: read-create
OBJECT-TYPE
	VlanIdOrNone

tnEvcEceNNIInnerTagType		1.3.6.1.4.1.868.2.5.106.1.1.5.1.10
The inner type for the ECE determines whether an inner tag is inserted in frames forwarded to NNI ports.\ The possible values are: None: An inner tag is not inserted. C-tag: An inner C-tag is inserted. S-tag: An inner S-tag is inserted. S-custom-tag: An inner tag is inserted and the tag type is determined by the VLAN port configuration of the NNI.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	none(0), ctag(1), stag(2), sctag(3)

tnEvcEceInnerVid		1.3.6.1.4.1.868.2.5.106.1.1.5.1.11
The inner tag VLAN ID for the ECE. The allowed range is from 0 through 4094.
Status: current	Access: read-create
OBJECT-TYPE
	VlanIdOrNone

tnEvcEceInnerPCPDEIPreserve		1.3.6.1.4.1.868.2.5.106.1.1.5.1.12
The inner tag PCP and DEI preservation for the ECE. The possible values are: Preserved: The inner tag PCP and DEI is preserved. Fixed: The inner tag PCP and DEI is fixed.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	preserved(1), fixed(2)

tnEvcEceInnerPCP		1.3.6.1.4.1.868.2.5.106.1.1.5.1.13
The inner tag PCP value for the ECE. The allowed range is from 0 through 7.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	0..7

tnEvcEceInnerDEI		1.3.6.1.4.1.868.2.5.106.1.1.5.1.14
The inner tag DEI value for the ECE. The allowed value is 0 or 1.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	0..1

tnEvcEceDMacVal		1.3.6.1.4.1.868.2.5.106.1.1.5.1.15
When 'Specific' is selected for the DMAC filter, you can enter a specific value. The legal format is 'xx-xx-xx-xx-xx-xx' or 'xx.xx.xx.xx.xx.xx' or 'xxxxxxxxxxxx' (x is a hexadecimal digit).
Status: current	Access: read-write
OBJECT-TYPE
	MacAddress

tnEvcEceOuterPCPMode		1.3.6.1.4.1.868.2.5.106.1.1.5.1.16
The outer tag PCP mode for the ECE. The possible values are: Classified: The outer tag PCP Mode is classified. Fixed: The outer tag PCP Mode is fixed. Mapped: The outer tag PCP Mode is based on mapped (QOS, DP).
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	classified(1), fixed(2), mapped(3)

tnEvcEceOuterDEIMode		1.3.6.1.4.1.868.2.5.106.1.1.5.1.17
The outer tag DEI mode for the ECE. The possible values are: Classified: The outer tag DEI mode is classified. Fixed: The outer tag DEI mode is fixed. Drop Precedence: The outer tag DEI mode is drop precedence.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	classified(1), fixed(2), dropPrec(3)

tnEvcEceActRuleType		1.3.6.1.4.1.868.2.5.106.1.1.5.1.18
The rule type for the ECE. The possible values are: Both: Ingress and egress rule. RX: Ingress rule. TX: Egress rule.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	both(1), rx(2), tx(3)

tnEvcEceActTxLookupType		1.3.6.1.4.1.868.2.5.106.1.1.5.1.19
The TX lookup for the ECE. The possible values are: VID lookup: The TX lookup is based on VID. VID-PCP: The TX lookup is based on VID and PCP. ISDX: The TX lookup is based on ISDX.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	vidLookup(1), vidPCP(2), isdx(3)

tnEvcEceActDropPrecType		1.3.6.1.4.1.868.2.5.106.1.1.5.1.20
The drop precedence for the ECE. The allowed range is 0, 1 or disabled.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	dp0(1), dp1(2), disabled(3)

tnEvcEceInnerPcpMode		1.3.6.1.4.1.868.2.5.106.1.1.5.1.21
The inner tag PCP mode for the ECE. The possible values are: Classified: The inner tag PCP Mode is classified. Fixed: The inner tag PCP Mode is classified. Mapped: The inner tag PCP Mode is based on mapped (QOS, DP).
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	classified(1), fixed(2), mapped(3)

tnEvcEceIInnerDeiMode		1.3.6.1.4.1.868.2.5.106.1.1.5.1.22
The inner tag DEI mode for the ECE. The possible values are: Classified: The inner tag DEI mode is classified. Fixed: The inner tag DEI mode is fixed. Drop Precedence: The inner tag DEI mode is drop precedence.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	classified(1), fixed(2), dropPrecedence(3)

tnEvcEceIpv4DipFilter		1.3.6.1.4.1.868.2.5.106.1.1.5.1.23
The destination IP address for matching the ECE. The possible values are: Any: No DIP filter is specified. (DIP filter status is 'don't-care'.) Host: If you want to filter a specific host address with this ECE, choose this value. A field for entering a host address appears. Network: If you want to filter a specific network address with this ECE, choose this value. A Two fields for entering a specific network address and network mask appears.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	any(1), host(2), network(3)

tnEvcEceIpv4DipAddr		1.3.6.1.4.1.868.2.5.106.1.1.5.1.24
When 'Host' or 'Network' is selected for the DIP filter, you can enter a specific host or network address.
Status: current	Access: read-write
OBJECT-TYPE
	InetAddress

tnEvcEceIpv4DipMask		1.3.6.1.4.1.868.2.5.106.1.1.5.1.25
When 'Host' or 'Network' is selected for the DIP filter, you can enter a specific network mask.
Status: current	Access: read-write
OBJECT-TYPE
	InetAddress

tnEvcEceIpv6DipFilter		1.3.6.1.4.1.868.2.5.106.1.1.5.1.26
The destination IP address for matching the ECE. The possible values are: Any: No DIP filter is specified. (DIP filter status is 'don't-care'.) Host: If you want to filter a specific host address with this ECE, choose this value. A field for entering a host address appears. Network: If you want to filter a specific network address with this ECE, choose this value. A Two fields for entering a specific network address and network mask appears.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	any(1), host(2), network(3)

tnEvcEceIpv6DipAddr		1.3.6.1.4.1.868.2.5.106.1.1.5.1.27
When 'Host' or 'Network' is selected for the DIP filter, you can enter a specific host or network address.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

tnEvcEceIpv6DipMask		1.3.6.1.4.1.868.2.5.106.1.1.5.1.28
When 'Host' or 'Network' is selected for the DIP filter, you can enter a specific network mask.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

tnEvcEceLookup		1.3.6.1.4.1.868.2.5.106.1.1.5.1.29
The looup type for matching the ECE. The allowed values are: Basic: First lookup for basic classification. Advanced: Second lookup for advanced classification.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	basic(1), advanced(2)

tnEvcEceEtypeFilter		1.3.6.1.4.1.868.2.5.106.1.1.5.1.30
The Ethernet type value for matching the ECE. The possible values are: Any: No Ethernet type value filter is specified. (Ethernet type filter status is 'don't-care'.) Specific: If you want to filter a specific Ethernet type value with this ECE, choose this value.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	any(1), specific(2)

tnEvcEceEtypeValue		1.3.6.1.4.1.868.2.5.106.1.1.5.1.31
When 'Specific' is selected for the Ethernet type filter, you can enter a specific value. The allowed value is from 0x600 through 0xFFFF but exclude 0x0800(IPv4), 0x806(ARP) and 0x86DD(IPv6).
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

tnEvcEceEtypeDataFilter		1.3.6.1.4.1.868.2.5.106.1.1.5.1.32
The Ethernet type data for matching the ECE. The possible values are: Any: No Ethernet type data filter is specified. (Ethernet type filter status is 'don't-care'.) Specific: If you want to filter a specific Ethernet type value with this ECE, choose this value.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	any(1), specific(2)

tnEvcEceEtypeData		1.3.6.1.4.1.868.2.5.106.1.1.5.1.33
When 'Specific' is selected for the Ethernet type filter, you can enter a specific value. The allowed value is from 0x600 through 0xFFFF but exclude 0x0800(IPv4), 0x806(ARP) and 0x86DD(IPv6).
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

tnEvcEceEtypeDataMask		1.3.6.1.4.1.868.2.5.106.1.1.5.1.34
When 'Specific' is selected for the Ethernet type data filter, you can enter a specific value. It is a pair of the Ethernet type data and its mask. The allowed value is from 0x0 through 0xFFFF.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

tnEvcEceLlcDSAPFilter		1.3.6.1.4.1.868.2.5.106.1.1.5.1.35
The LLC DSAP for matching the ECE. The possible values are: Any: No LLC DSAP value filter is specified. (LLC DSAP filter status is 'don't-care'.) Specific: If you want to filter a specific LLC DSAP value with this ECE, choose this value.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	any(1), specific(2)

tnEvcEceLlcDSAPValue		1.3.6.1.4.1.868.2.5.106.1.1.5.1.36
When 'Specific' is selected for the LLC DSAP filter, you can enter a specific value. The allowed value is from 0x0 through 0xFF
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

tnEvcEceLlcSSAPFilter		1.3.6.1.4.1.868.2.5.106.1.1.5.1.37
The LLC SSAP for matching the ECE. The possible values are: Any: No LLC SSAP value filter is specified. (LLC SSAP filter status is 'don't-care'.) Specific: If you want to filter a specific LLC SSAP value with this ECE, choose this value.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	any(1), specific(2)

tnEvcEceLlcSSAPValue		1.3.6.1.4.1.868.2.5.106.1.1.5.1.38
When 'Specific' is selected for the LLC SSAP filter, you can enter a specific value. The allowed value is from 0x0 through 0xFF.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

tnEvcEceLlcCtrlFilter		1.3.6.1.4.1.868.2.5.106.1.1.5.1.39
The LLC control for matching the ECE. The possible values are: Any: No LLC control value filter is specified. (LLC control filter status is 'don't-care'.) Specific: If you want to filter a specific LLC control value with this ECE, choose this value.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	any(1), specific(2)

tnEvcEceLlcCtrlValue		1.3.6.1.4.1.868.2.5.106.1.1.5.1.40
When 'Specific' is selected for the LLC control filter, you can enter a specific value. The allowed value is from 0x0 through 0xFF.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

tnEvcEceLlcDataFilter		1.3.6.1.4.1.868.2.5.106.1.1.5.1.41
The LLC data for matching the ECE. The possible values are: Any: No LLC data filter is specified. (LLC filter status is 'don't-care'.) Specific: If you want to filter a specific LLC value with this ECE, choose this value.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	any(1), specific(2)

tnEvcEceLlcDataValue		1.3.6.1.4.1.868.2.5.106.1.1.5.1.42
When 'Specific' is selected for the LLC data filter, you can enter a specific value. It is a pair of the LLC data and its mask. The allowed value is from 0x0 through 0xFFFF.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

tnEvcEceLlcDataMask		1.3.6.1.4.1.868.2.5.106.1.1.5.1.43
When 'Specific' is selected for the LLC data filter, you can enter a specific mask. The allowed value is from 0x0 through 0xFFFF.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

tnEvcEceSnapOuiFilter		1.3.6.1.4.1.868.2.5.106.1.1.5.1.44
The SNAP OUI for matching the ECE. The possible values are: Any: No SNAP OUI value filter is specified. (SNAP OUI filter status is 'don't-care'.) Specific: If you want to filter a specific SNAP OUI value with this ECE, choose this value.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	any(1), specific(2)

tnEvcEceSnapOuiValue		1.3.6.1.4.1.868.2.5.106.1.1.5.1.45
When 'Specific' is selected for the SNAP OUI filter, you can enter a specific value. The allowed value is from 00-00-00 through FF-FF-FF.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

tnEvcEceSnapPidFilter		1.3.6.1.4.1.868.2.5.106.1.1.5.1.46
The SNAP PID for matching the ECE. The possible values are: Any: No SNAP PID value filter is specified. (SNAP PID filter status is 'don't-care'.) Specific: If you want to filter a specific SNAP PID value with this ECE, choose this value.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	any(1), specific(2)

tnEvcEceSnapPidValue		1.3.6.1.4.1.868.2.5.106.1.1.5.1.47
When 'Specific' is selected for the SNAP PID filter, you can enter a specific value. The allowed value is from 0x0 through 0xFFFF.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

tnEvcEceL2cpProtoType		1.3.6.1.4.1.868.2.5.106.1.1.5.1.48
The L2CP type for the ECE. The possible values are: STP/RSTP/MSTP: Match STP/RSTP/MSTP frames. Pause: Match Pause frames. LACP: Match LACP frames. LAMP: Match LAMP frames. Link OAM(802.1ah): Match Link OAM(802.1ah) frames. Port Authentication(802.1x): Match Port Authentication(802.1x) frames. E-LMI: Match PB Group Address frames. PB Group Address: Match PB Group Address frames. PB GVRP: Match PB GVRP frames. LLDP: Match LLDP frames. GMRP: Match GMRP frames. GVRP: Match GVRP frames. ULD: Match ULD frames. PAgP: Match PAgP frames. PVST/PVST+: Match PVST/PVST+ frames. Cisco BPDU: Match Cisco BPDU frames. CDP: Match CDP frames. VTP: Match VTP frames. DTP: Match DTP frames. STP Uplink Fast: Match STP Uplink Fast frames. Cisco CFM: Match Cisco CFM frames.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	stpRstpMstp(1), pause(2), lacp(3), lamp(4), linkOam(5), portAuth8021x(6), elmi(7), pbGroupAddr(8), pbGvrp(9), lldp(10), gmrp(11), gvrp(12), uld(13), pagp(14), pvstPvstP(15), ciscoBpdu(16), cdp(17), vtp(18), dtp(19), stpUplinkFast(20), ciscoCfm(21)

tnEvcStatTable		1.3.6.1.4.1.868.2.5.106.1.2.1
This table provides NNI port traffic statistics for the selected EVC. It also shows counters for UNI ports of ECEs mapping to the EVC.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		TnEvcStatEntry

tnEvcStatEntry		1.3.6.1.4.1.868.2.5.106.1.2.1.1
This entry represents an entry of EVC statistics.
Status: current	Access: not-accessible
OBJECT-TYPE
	TnEvcStatEntry

tnEvcStatClass		1.3.6.1.4.1.868.2.5.106.1.2.1.1.1
The traffic class for the EVC.
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER	1..11111

tnEvcStatGreenFrameRx		1.3.6.1.4.1.868.2.5.106.1.2.1.1.2
The number of green received.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

tnEvcStatGreenFrameTx		1.3.6.1.4.1.868.2.5.106.1.2.1.1.3
The number of green transmitted.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

tnEvcStatYellowFrameRx		1.3.6.1.4.1.868.2.5.106.1.2.1.1.4
The number of yellow received.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

tnEvcStatYellowFrameTx		1.3.6.1.4.1.868.2.5.106.1.2.1.1.5
The number of yellow transmitted.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

tnEvcStatRedFrameRx		1.3.6.1.4.1.868.2.5.106.1.2.1.1.6
The number of red received.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

tnEvcStatDiscardGreenFrame		1.3.6.1.4.1.868.2.5.106.1.2.1.1.7
The number of discarded in the green color.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

tnEvcStatDiscardYellowFrame		1.3.6.1.4.1.868.2.5.106.1.2.1.1.8
The number of discarded in the yellow color.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

tnEvcStatClear		1.3.6.1.4.1.868.2.5.106.1.2.1.1.9
Clears the counters for selected ports when the value of tnEvcStatClear is true.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

tnEvcExtStatTable		1.3.6.1.4.1.868.2.5.106.1.2.2
This table provides port traffic statistics for the selected EVC. It also shows counters for UNI ports of ECEs mapping to the EVC.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		TnEvcExtStatEntry

tnEvcExtStatEntry		1.3.6.1.4.1.868.2.5.106.1.2.2.1
This entry represents an entry of EVC statistics.
Status: current	Access: not-accessible
OBJECT-TYPE
	TnEvcExtStatEntry

tnEvcExtStatType		1.3.6.1.4.1.868.2.5.106.1.2.2.1.1
The traffic class for the EVC.
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER	evc(1), ece(2)

tnEvcExtStatIndex		1.3.6.1.4.1.868.2.5.106.1.2.2.1.2
The EVC or ECE index.
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER	1..11111

tnEvcExtStatPort		1.3.6.1.4.1.868.2.5.106.1.2.2.1.3
The EVC or ECE index.
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER	1..11111

tnEvcExtStatGreenFrameRx		1.3.6.1.4.1.868.2.5.106.1.2.2.1.4
The number Frames of green received.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

tnEvcExtStatGreenFrameTx		1.3.6.1.4.1.868.2.5.106.1.2.2.1.5
The number Frames of green transmitted.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

tnEvcExtStatGreenBytesRx		1.3.6.1.4.1.868.2.5.106.1.2.2.1.6
The number Bytes of green received.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

tnEvcExtStatGreenBytesTx		1.3.6.1.4.1.868.2.5.106.1.2.2.1.7
The number Bytes of green transmitted.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

tnEvcExtStatYellowFrameRx		1.3.6.1.4.1.868.2.5.106.1.2.2.1.8
The number Frames of yellow received.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

tnEvcExtStatYellowFrameTx		1.3.6.1.4.1.868.2.5.106.1.2.2.1.9
The number Frames of yellow transmitted.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

tnEvcExtStatYellowBytesRx		1.3.6.1.4.1.868.2.5.106.1.2.2.1.10
The number Bytes of yellow received.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

tnEvcExtStatYellowBytesTx		1.3.6.1.4.1.868.2.5.106.1.2.2.1.11
The number Bytes of yellow transmitted.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

tnEvcExtStatRedFrameRx		1.3.6.1.4.1.868.2.5.106.1.2.2.1.12
The number Frames of red received.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

tnEvcExtStatRedBytesRx		1.3.6.1.4.1.868.2.5.106.1.2.2.1.13
The number Bytes of red received.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

tnEvcExtStatDiscardFrameRx		1.3.6.1.4.1.868.2.5.106.1.2.2.1.14
The number Frames of discarded received.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

tnEvcExtStatDiscardFrameTx		1.3.6.1.4.1.868.2.5.106.1.2.2.1.15
The number Frames of discarded transmitted.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

tnEvcExtStatDiscardBytesRx		1.3.6.1.4.1.868.2.5.106.1.2.2.1.16
The number Bytes of discarded received.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

tnEvcExtStatDiscardBytesTx		1.3.6.1.4.1.868.2.5.106.1.2.2.1.17
The number Bytes of discarded transmitted.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

tnEvcExtStatclear		1.3.6.1.4.1.868.2.5.106.1.2.2.1.18
Clear the value by EVC or ECE index.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

tnEvcL2cpCfgTable		1.3.6.1.4.1.868.2.5.106.1.3.3
This table supports L2CP settings.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		TnEvcL2cpCfgEntry

tnEvcL2cpCfgEntry		1.3.6.1.4.1.868.2.5.106.1.3.3.1
L2CP settings table entry.
Status: current	Access: not-accessible
OBJECT-TYPE
	TnEvcL2cpCfgEntry

tnEvcL2cpCfgInterfaceNumber		1.3.6.1.4.1.868.2.5.106.1.3.3.1.1
Sets L2CP interface number.
Status: current	Access: not-accessible
OBJECT-TYPE
	Unsigned32

tnEvcL2cpCfgIndex		1.3.6.1.4.1.868.2.5.106.1.3.3.1.2
Sets L2CP index number on an interface.
Status: current	Access: not-accessible
OBJECT-TYPE
	Unsigned32

tnEvcL2cpCfgType		1.3.6.1.4.1.868.2.5.106.1.3.3.1.3
Sets L2CP type setting.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	discard(1), tunnel(2), peer(3), passToEvc(4), peerToEvc(5)

tnEvcL2cpCfgMatchScope		1.3.6.1.4.1.868.2.5.106.1.3.3.1.4
Sets L2CP selection matching scope.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	destinationAddressOnly(1), daPlusProtocol(2), daPlusProtocolPlusSubtype(3)

tnEvcL2cpCfgMacAddress		1.3.6.1.4.1.868.2.5.106.1.3.3.1.5
Sets L2CP Destination MAC address.
Status: current	Access: read-create
OBJECT-TYPE
	MacAddress

tnEvcL2cpCfgProtocol		1.3.6.1.4.1.868.2.5.106.1.3.3.1.6
Sets L2CP protocol.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32

tnEvcL2cpCfgSubType		1.3.6.1.4.1.868.2.5.106.1.3.3.1.7
Sets L2CP subtype for the protocol selected.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32

tnEvcL2cpCfgEvcName		1.3.6.1.4.1.868.2.5.106.1.3.3.1.8
Sets L2CP EVC association.
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(0..45)

tnEvcL2cpCfgValid		1.3.6.1.4.1.868.2.5.106.1.3.3.1.9
Sets L2CP valid instance.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	invalid(1), valid(2)

tnEvcL2cpCfgRowStatus		1.3.6.1.4.1.868.2.5.106.1.3.3.1.10
The status of the row. The writable columns in a row cannot be changed if the row is active. All columns must have a valid value before a row can be activated.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

tnEvcConformance		1.3.6.1.4.1.868.2.5.106.1.8
OBJECT IDENTIFIER

tnEvcGroups		1.3.6.1.4.1.868.2.5.106.1.8.1
OBJECT IDENTIFIER

tnEvcPortConfigGroup		1.3.6.1.4.1.868.2.5.106.1.8.1.1
The collection of objects which are used to configure or describe the configuration or behavior of the S3280.
Status: current	Access: read-create
OBJECT-GROUP

tnEvcJaguarPortConfigGroup		1.3.6.1.4.1.868.2.5.106.1.8.1.2
The collection of objects which are used to configure or describe the configuration or behavior of the S4140.
Status: current	Access: read-create
OBJECT-GROUP

tnEvcTableGroup		1.3.6.1.4.1.868.2.5.106.1.8.1.3
The collection of objects which are used to configure or describe the configuration or behavior of the S4140.
Status: current	Access: read-create
OBJECT-GROUP