TIMETRA-MSDP-MIB

File: TIMETRA-MSDP-MIB.mib (105611 bytes)

Imported modules

SNMPv2-SMI SNMPv2-CONF SNMPv2-TC
TIMETRA-GLOBAL-MIB TIMETRA-TC-MIB INET-ADDRESS-MIB

Imported symbols

MODULE-IDENTITY OBJECT-TYPE NOTIFICATION-TYPE
Unsigned32 Gauge32 Counter32
Integer32 MODULE-COMPLIANCE OBJECT-GROUP
NOTIFICATION-GROUP RowStatus TruthValue
TimeInterval TimeStamp timetraSRMIBModules
tmnxSRObjs tmnxSRNotifyPrefix tmnxSRConfs
TPolicyStatementNameOrEmpty TmnxAdminState TNamedItem
TNamedItemOrEmpty InetAddressType InetAddress
InetAddressPrefixLength

Defined Types

TmnxMsdpPeerEntry  
SEQUENCE    
  tmnxMsdpPeerAddressType InetAddressType
  tmnxMsdpPeerAddress InetAddress
  tmnxMsdpPeerRowStatus RowStatus
  tmnxMsdpPeerMaxActiveSources Integer32
  tmnxMsdpPeerMsgRcvRate Unsigned32
  tmnxMsdpPeerMsgRcvRateTime Unsigned32
  tmnxMsdpPeerMsgRcvRateThd Gauge32
  tmnxMsdpPeerAuthKey OCTET STRING
  tmnxMsdpPeerAuthKeyEncrypted TruthValue
  tmnxMsdpPeerDefaultPeer TruthValue
  tmnxMsdpPeerAdminState TmnxAdminState
  tmnxMsdpPeerExportPolicy1 TPolicyStatementNameOrEmpty
  tmnxMsdpPeerExportPolicy2 TPolicyStatementNameOrEmpty
  tmnxMsdpPeerExportPolicy3 TPolicyStatementNameOrEmpty
  tmnxMsdpPeerExportPolicy4 TPolicyStatementNameOrEmpty
  tmnxMsdpPeerExportPolicy5 TPolicyStatementNameOrEmpty
  tmnxMsdpPeerImportPolicy1 TPolicyStatementNameOrEmpty
  tmnxMsdpPeerImportPolicy2 TPolicyStatementNameOrEmpty
  tmnxMsdpPeerImportPolicy3 TPolicyStatementNameOrEmpty
  tmnxMsdpPeerImportPolicy4 TPolicyStatementNameOrEmpty
  tmnxMsdpPeerImportPolicy5 TPolicyStatementNameOrEmpty
  tmnxMsdpPeerLocalAddressType InetAddressType
  tmnxMsdpPeerLocalAddress InetAddress
  tmnxMsdpPeerState INTEGER
  tmnxMsdpPeerLastUpOrDown TimeStamp
  tmnxMsdpPeerConRetry Counter32
  tmnxMsdpPeerStateTimer Unsigned32
  tmnxMsdpPeerTimeout Unsigned32
  tmnxMsdpPeerSAAccepted Gauge32
  tmnxMsdpPeerSARecvd Gauge32
  tmnxMsdpPeerLastASLimit TimeStamp

TmnxMsdpPeerGroupEntry  
SEQUENCE    
  tmnxMsdpPeerGroupName TNamedItem
  tmnxMsdpPeerGroupRowStatus RowStatus
  tmnxMsdpPeerGroupMsgRcvRate Unsigned32
  tmnxMsdpPeerGroupMsgRcvRateTime Unsigned32
  tmnxMsdpPeerGroupMsgRcvRateThd Gauge32
  tmnxMsdpPeerGroupAdminState TmnxAdminState
  tmnxMsdpPeerGroupExportPolicy1 TPolicyStatementNameOrEmpty
  tmnxMsdpPeerGroupExportPolicy2 TPolicyStatementNameOrEmpty
  tmnxMsdpPeerGroupExportPolicy3 TPolicyStatementNameOrEmpty
  tmnxMsdpPeerGroupExportPolicy4 TPolicyStatementNameOrEmpty
  tmnxMsdpPeerGroupExportPolicy5 TPolicyStatementNameOrEmpty
  tmnxMsdpPeerGroupImportPolicy1 TPolicyStatementNameOrEmpty
  tmnxMsdpPeerGroupImportPolicy2 TPolicyStatementNameOrEmpty
  tmnxMsdpPeerGroupImportPolicy3 TPolicyStatementNameOrEmpty
  tmnxMsdpPeerGroupImportPolicy4 TPolicyStatementNameOrEmpty
  tmnxMsdpPeerGroupImportPolicy5 TPolicyStatementNameOrEmpty
  tmnxMsdpPeerGroupLocalAddrType InetAddressType
  tmnxMsdpPeerGroupLocalAddress InetAddress
  tmnxMsdpPeerGroupMode INTEGER
  tmnxMsdpPeerGroupMaxActSources Integer32
  tmnxMsdpPeerGroupActMsgsExMax Counter32
  tmnxMsdpPeerGrpSARejExpPolicy Counter32
  tmnxMsdpPeerGrpSARejImpPolicy Counter32

TmnxMsdpPeerGrpPeerEntry  
SEQUENCE    
  tmnxMsdpPeerGrpPeerAddressType InetAddressType
  tmnxMsdpPeerGrpPeerAddress InetAddress
  tmnxMsdpPeerGrpPeerRowStatus RowStatus
  tmnxMsdpPeerGrpPeerMaxActSrcs Integer32
  tmnxMsdpPeerGrpPeerMsgRcvRt Unsigned32
  tmnxMsdpPeerGrpPeerMsgRcvRtTime Unsigned32
  tmnxMsdpPeerGrpPeerMsgRcvRtThd Gauge32
  tmnxMsdpPeerGrpPeerAuthKey OCTET STRING
  tmnxMsdpPeerGrpPeerAKeyEncrypt TruthValue
  tmnxMsdpPeerGrpPeerDefaultPeer TruthValue
  tmnxMsdpPeerGrpPeerAdminState TmnxAdminState
  tmnxMsdpPeerGrpPeerExportPolicy1 TPolicyStatementNameOrEmpty
  tmnxMsdpPeerGrpPeerExportPolicy2 TPolicyStatementNameOrEmpty
  tmnxMsdpPeerGrpPeerExportPolicy3 TPolicyStatementNameOrEmpty
  tmnxMsdpPeerGrpPeerExportPolicy4 TPolicyStatementNameOrEmpty
  tmnxMsdpPeerGrpPeerExportPolicy5 TPolicyStatementNameOrEmpty
  tmnxMsdpPeerGrpPeerImportPolicy1 TPolicyStatementNameOrEmpty
  tmnxMsdpPeerGrpPeerImportPolicy2 TPolicyStatementNameOrEmpty
  tmnxMsdpPeerGrpPeerImportPolicy3 TPolicyStatementNameOrEmpty
  tmnxMsdpPeerGrpPeerImportPolicy4 TPolicyStatementNameOrEmpty
  tmnxMsdpPeerGrpPeerImportPolicy5 TPolicyStatementNameOrEmpty
  tmnxMsdpPeerGrpPeerLocAddrType InetAddressType
  tmnxMsdpPeerGrpPeerLocalAddress InetAddress
  tmnxMsdpPeerGrpPeerState INTEGER
  tmnxMsdpPeerGrpPeerLastUpOrDown TimeStamp
  tmnxMsdpPeerGrpPeerConRetry Counter32
  tmnxMsdpPeerGrpPeerStateTimer Unsigned32
  tmnxMsdpPeerGrpPeerTimeout Unsigned32
  tmnxMsdpPeerGrpPeerSAAccepted Gauge32
  tmnxMsdpPeerGrpPeerSARecvd Gauge32
  tmnxMsdpPeerGrpPeerLastASLimit TimeStamp

TmnxMsdpSourceEntry  
SEQUENCE    
  tmnxMsdpSourcePrefixType InetAddressType
  tmnxMsdpSourcePrefix InetAddress
  tmnxMsdpSourceMask InetAddressPrefixLength
  tmnxMsdpSourceRowStatus RowStatus
  tmnxMsdpSourceMaxActiveSources Integer32
  tmnxMsdpSourceDiscMethod INTEGER
  tmnxMsdpSourceSrcActMsgsExMax Counter32
  tmnxMsdpSourceLastExEventTime TimeStamp

TmnxMsdpSrcActiveEntry  
SEQUENCE    
  tmnxMsdpSrcActiveGroupAddrType InetAddressType
  tmnxMsdpSrcActiveGroupAddr InetAddress
  tmnxMsdpSrcActiveSourceAddrType InetAddressType
  tmnxMsdpSrcActiveSourceAddr InetAddress
  tmnxMsdpSrcActiveOriginRPType InetAddressType
  tmnxMsdpSrcActiveOriginRP InetAddress
  tmnxMsdpSrcActivePrLearnFrType InetAddressType
  tmnxMsdpSrcActivePeerLearntFrom InetAddress
  tmnxMsdpSrcActiveRPFPeerType InetAddressType
  tmnxMsdpSrcActiveRPFPeer InetAddress
  tmnxMsdpSrcActiveUpTime TimeInterval
  tmnxMsdpSrcActiveExpiryTime TimeInterval

TmnxMsdpPeerStatsEntry  
SEQUENCE    
  tmnxMsdpPeerStatsActSrcLimExcd Counter32
  tmnxMsdpPeerStatsLastStChange TimeInterval
  tmnxMsdpPeerStatsLastMsgPeer TimeInterval
  tmnxMsdpPeerStatsRPFFailures Counter32
  tmnxMsdpPeerStatsRemoteCloses Counter32
  tmnxMsdpPeerStatsPeerTimeouts Counter32
  tmnxMsdpPeerStatsSAMsgsSent Counter32
  tmnxMsdpPeerStatsSAMsgsRecvd Counter32
  tmnxMsdpPeerStatsSAReqMsgsSent Counter32
  tmnxMsdpPeerStatsSAReqMsgsRecvd Counter32
  tmnxMsdpPeerStatsSAResMsgsSent Counter32
  tmnxMsdpPeerStatsSAResMsgsRecvd Counter32
  tmnxMsdpPeerStatsKAMsgsSent Counter32
  tmnxMsdpPeerStatsKAMsgsRecvd Counter32
  tmnxMsdpPeerStatsUnknMsgsRecvd Counter32
  tmnxMsdpPeerStatsErrorMsgsRecvd Counter32
  tmnxMsdpPeerStatsSALearnt Gauge32
  tmnxMsdpPeerStatsSARejExpPolicy Counter32
  tmnxMsdpPeerStatsSARejImpPolicy Counter32
  tmnxMsdpPeerStatsResvMsgsRecvd Counter32

TmnxMsdpSrcActRejEntry  
SEQUENCE    
  tmnxMsdpSrcActRejPeerGroupName TNamedItemOrEmpty
  tmnxMsdpSrcActRejGroupAddrType InetAddressType
  tmnxMsdpSrcActRejGroupAddr InetAddress
  tmnxMsdpSrcActRejSourceAddrType InetAddressType
  tmnxMsdpSrcActRejSourceAddr InetAddress
  tmnxMsdpSrcActRejOriginRPType InetAddressType
  tmnxMsdpSrcActRejOriginRP InetAddress
  tmnxMsdpSrcActRejPeerAddrType InetAddressType
  tmnxMsdpSrcActRejPeerAddr InetAddress
  tmnxMsdpSrcActRejFailureReason INTEGER

Defined Values

timetraMsdpMIBModule 1.3.6.1.4.1.6527.1.1.3.43
This is the SNMP MIB module to manage and provision MSDP protocol on Alcatel SROS equipment. The Multicast Source Discovery Protocol (MSDP) is used to connect multicast routing domains. It typically runs on the same router as the Protocol Independent Multicast (PIM) sparse-mode rendezvous point (RP). Each MSDP router establishes adjacencies with internal and external MSDP peers similar to the Border Gateway Protocol (BGP). These peer routers inform each other about active sources within the domain. When they detect active sources, the routers can send PIM sparse-mode explicit join messages to the active source. Copyright 2006-2011 Alcatel-Lucent. All rights reserved. Reproduction of this document is authorized on the condition that the foregoing copyright notice is included. This SNMP MIB module (Specification) embodies Alcatel-Lucent's proprietary intellectual property. Alcatel-Lucent retains all title and ownership in the Specification, including any revisions. Alcatel-Lucent grants all interested parties a non-exclusive license to use and distribute an unmodified copy of this Specification in connection with management of Alcatel-Lucent products, and without fee, provided this copyright notice and license appear on all copies. This Specification is supplied 'as is', and Alcatel-Lucent makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification.
MODULE-IDENTITY    

tmnxMsdpObjects 1.3.6.1.4.1.6527.3.1.2.43
OBJECT IDENTIFIER    

tmnxMsdpGlobals 1.3.6.1.4.1.6527.3.1.2.43.1
OBJECT IDENTIFIER    

tmnxMsdpConformance 1.3.6.1.4.1.6527.3.1.1.43
OBJECT IDENTIFIER    

tmnxMsdpCompliances 1.3.6.1.4.1.6527.3.1.1.43.1
OBJECT IDENTIFIER    

tmnxMsdpGroups 1.3.6.1.4.1.6527.3.1.1.43.2
OBJECT IDENTIFIER    

tmnxMsdpNotifyPrefix 1.3.6.1.4.1.6527.3.1.3.43
OBJECT IDENTIFIER    

tmnxMsdpNotifications 1.3.6.1.4.1.6527.3.1.3.43.0
OBJECT IDENTIFIER    

tmnxMsdpMaxActiveSources 1.3.6.1.4.1.6527.3.1.2.43.1.1
The value of tmnxMsdpMaxActiveSources specifies the maximum number of source active messages that will be accepted by MSDP. This effectively controls the number of source active messages that can be stored on the system. By default, no limit is placed on the number of source active messages and this is specified by the value '-1'. A value of 0 means that no source active messages will be accepted.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 -1 | 0..1000000  

tmnxMsdpMsgRcvRate 1.3.6.1.4.1.6527.3.1.2.43.1.2
The value of tmnxMsdpMsgRcvRate specifies the number of MSDP messages (including source active messages) that are read from the TCP session per tmnxMsdpMsgRcvRateTime seconds. By default, no MSDP messages are read from the TCP session and this is specified by the value 0. Once the number of MSDP packets defined in tmnxMsdpMsgRcvRateThd have been processed the rate of all other MSDP packets is rate limited by no longer accepting messages from the TCP session until tmnxMsdpMsgRcvRateTime seconds have elapsed.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0 | 10..10000  

tmnxMsdpMsgRcvRateTime 1.3.6.1.4.1.6527.3.1.2.43.1.3
The value of tmnxMsdpMsgRcvRateTime specifies the time in seconds that together with tmnxMsdpMsgRcvRate defines the number of MSDP messages (including source active messages) that are read from the TCP session within the configured number of seconds. By default, no MSDP messages are read from the TCP session and this is specified by the value 0. Once the number of MSDP packets defined in tmnxMsdpMsgRcvRateThd have been processed the rate of all other MSDP packets is rate limited by no longer accepting messages from the TCP session until tmnxMsdpMsgRcvRateTime seconds have elapsed.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0 | 1..600  

tmnxMsdpMsgRcvRateThd 1.3.6.1.4.1.6527.3.1.2.43.1.4
The value of tmnxMsdpMsgRcvRateThd specifies the number of MSDP messages that can be processed before tmnxMsdpMsgRcvRate is set. This is useful during system startup and initialization. By default, no MSDP messages are read from the TCP session and this is specified by the value 0. Once the number of MSDP packets defined in tmnxMsdpMsgRcvRateThd have been processed the rate of all other MSDP packets is rate limited by no longer accepting messages from the TCP session until tmnxMsdpMsgRcvRateTime seconds have elapsed.
Status: current Access: read-create
OBJECT-TYPE    
  Gauge32 0 | 1..1000000  

tmnxMsdpDataEncapsulation 1.3.6.1.4.1.6527.3.1.2.43.1.5
The value of tmnxMsdpDataEncapsulation is used to configure a rendezvous point (RP) using MSDP to encapsulate multicast data received in MSDP register messages inside forwarded MSDP source-active messages. By default data encapsulation is enabled.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

tmnxMsdpAdminState 1.3.6.1.4.1.6527.3.1.2.43.1.6
The value of tmnxMsdpAdminState specifies the desired administrative state for MSDP. When MSDP is 'outOfService' the operational state of MSDP as well as the operational state of other entities under it, like peer or peer group is also disabled. By default, state of MSDP is 'inService'.
Status: current Access: read-create
OBJECT-TYPE    
  TmnxAdminState  

tmnxMsdpExportPolicy1 1.3.6.1.4.1.6527.3.1.2.43.1.7
The value of tmnxMsdpExportPolicy1 specifies the export policy to export Source Active (SA) state from the SA list into MSDP. A maximum of five policy names can be specified. tmnxMsdpExportPolicy1 specifies policy number 1 at the protocol level. By default no export policies are applied and all SA entries are announced.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

tmnxMsdpExportPolicy2 1.3.6.1.4.1.6527.3.1.2.43.1.8
The value of tmnxMsdpExportPolicy2 specifies the export policy to export Source Active (SA) state from the SA list into MSDP. tmnxMsdpExportPolicy2 specifies policy number 2 at the protocol level. By default no export policies are applied and all SA entries are announced.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

tmnxMsdpExportPolicy3 1.3.6.1.4.1.6527.3.1.2.43.1.9
The value of tmnxMsdpExportPolicy3 specifies the export policy to export Source Active (SA) state from the SA list into MSDP. tmnxMsdpExportPolicy3 specifies policy number 3 at the protocol level. By default no export policies are applied and all SA entries are announced.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

tmnxMsdpExportPolicy4 1.3.6.1.4.1.6527.3.1.2.43.1.10
The value of tmnxMsdpExportPolicy4 specifies the export policy to export Source Active (SA) state from the SA list into MSDP. tmnxMsdpExportPolicy4 specifies policy number 4 at the protocol level. By default no export policies are applied and all SA entries are announced.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

tmnxMsdpExportPolicy5 1.3.6.1.4.1.6527.3.1.2.43.1.11
The value of tmnxMsdpExportPolicy5 specifies the export policy to export Source Active (SA) state from the SA list into MSDP. tmnxMsdpExportPolicy1 specifies policy number 5 at the protocol level. By default no export policies are applied and all SA entries are announced.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

tmnxMsdpImportPolicy1 1.3.6.1.4.1.6527.3.1.2.43.1.12
The value of tmnxMsdpImportPolicy1 specifies the import policy to import Source Active (SA) state from the SA list into MSDP. A maximum of five policy names can be specified. tmnxMsdpImportPolicy1 specifies policy number 1 at the protocol level. By default no import policies are applied and all SA entries are announced.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

tmnxMsdpImportPolicy2 1.3.6.1.4.1.6527.3.1.2.43.1.13
The value of tmnxMsdpImportPolicy2 specifies the import policy to import Source Active (SA) state from the SA list into MSDP. tmnxMsdpImportPolicy2 specifies policy number 2 at the protocol level. By default no import policies are applied and all SA entries are announced.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

tmnxMsdpImportPolicy3 1.3.6.1.4.1.6527.3.1.2.43.1.14
The value of tmnxMsdpImportPolicy3 specifies the import policy to import Source Active (SA) state from the SA list into MSDP. tmnxMsdpImportPolicy3 specifies policy number 3 at the protocol level. By default no import policies are applied and all SA entries are announced.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

tmnxMsdpImportPolicy4 1.3.6.1.4.1.6527.3.1.2.43.1.15
The value of tmnxMsdpImportPolicy4 specifies the import policy to import Source Active (SA) state from the SA list into MSDP. tmnxMsdpImportPolicy4 specifies policy number 4 at the protocol level. By default no import policies are applied and all SA entries are announced.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

tmnxMsdpImportPolicy5 1.3.6.1.4.1.6527.3.1.2.43.1.16
The value of tmnxMsdpImportPolicy5 specifies the import policy to import Source Active (SA) state from the SA list into MSDP. tmnxMsdpImportPolicy5 specifies policy number 5 at the protocol level. By default no import policies are applied and all SA entries are announced.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

tmnxMsdpLocalAddressType 1.3.6.1.4.1.6527.3.1.2.43.1.17
The value of tmnxMsdpLocalAddressType indicates the type of tmnxMsdpLocalAddress.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddressType  

tmnxMsdpLocalAddress 1.3.6.1.4.1.6527.3.1.2.43.1.18
The value of tmnxMsdpLocalAddress is used to configure the local end of a MSDP session. In order for MSDP to function at least one peer must be configured. When configuring a peer, the local end of the MSDP session must be configured. This address is used to validate incoming connections to the peer and to establish connections to the remote peer. By default no local address is configured.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddress Size(0|4|16)  

tmnxMsdpStatusPeerCount 1.3.6.1.4.1.6527.3.1.2.43.1.19
The value of tmnxMsdpStatusPeerCount indicates the number of configured peers.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

tmnxMsdpStatusPeersEstablished 1.3.6.1.4.1.6527.3.1.2.43.1.20
The value of tmnxMsdpStatusPeersEstablished indicates the number of peers in established state
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

tmnxMsdpStatusSACount 1.3.6.1.4.1.6527.3.1.2.43.1.21
The value of tmnxMsdpStatusSACount indicates the number of source active configured in cache.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

tmnxMsdpStatusLastTimeUp 1.3.6.1.4.1.6527.3.1.2.43.1.22
The value of tmnxMsdpStatusLastTimeUp indicates the last time the protocol was enabled.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tmnxMsdpStatusActSrcLimExceeded 1.3.6.1.4.1.6527.3.1.2.43.1.23
The value of tmnxMsdpStatusActSrcLimExceeded indicates the number of times the global active source limit has been exceeded
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tmnxMsdpRpfLookupSequence 1.3.6.1.4.1.6527.3.1.2.43.1.24
tmnxMsdpRpfLookupSequence is used to configure the sequence of route tables that MSDP uses for finding a Reverse Path Forwarding(RPF) interface for a particular multicast route. 'mucastRouteTable' is the unicast route table to be used only by multicast protocols(MSDP) which will contain routes submitted by multi-protocol BGP, ISIS and OSPF. 'ucastRouteTable' is the regular unicast route table which will contain routes submitted by all the unicast routing protocols. By default, only the 'ucastRouteTable' is looked up by MSDP for calculating RPF interface towards the source/rendezvous point. However the operator can specify the following: a) Use unicast route table only b) Use multicast unicast route table only or c) Use both the route tables. In case of (c), MSDP will always lookup first in the 'mucastRouteTable' and if there is a route, it will use it. If MSDP does not find a route in the first lookup, it will try to find it in the 'ucastRouteTable'.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER mucastRouteTable(0), ucastRouteTable(1), both(2)  

tmnxMsdpSACacheLifetime 1.3.6.1.4.1.6527.3.1.2.43.1.25
The value of tmnxMsdpSACacheLifetime specifies lifetime given to SA cache entries in seconds when created or refreshed. This object does not measure time per se; instead, it is the delta from the time at which an SA message is received at which it should be expired if not refreshed. (i.e., it is the value of tmnxMsdpSrcActiveExpiryTime immediately after receiving an SA message applying to that row.)
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 90..600  

tmnxMsdpSARejectExportPolicy 1.3.6.1.4.1.6527.3.1.2.43.1.26
The value of tmnxMsdpSARejectExportPolicy indicates number of SA messages that were not sent due to export policy.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tmnxMsdpSARejectImportPolicy 1.3.6.1.4.1.6527.3.1.2.43.1.27
The value of tmnxMsdpSARejectImportPolicy indicates number of SA messages that were rejected due to import policy.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tmnxMsdpPeerTable 1.3.6.1.4.1.6527.3.1.2.43.2
The tmnxMsdpPeerTable table provides information on the properties of a MSDP peer.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TmnxMsdpPeerEntry

tmnxMsdpPeerEntry 1.3.6.1.4.1.6527.3.1.2.43.2.1
tmnxMsdpPeerEntry represents a row entry in tmnxMsdpPeerTable for a MSDP peer. Entries can be created and deleted via SNMP SET operations through tmnxMsdpPeerRowStatus.
Status: current Access: not-accessible
OBJECT-TYPE    
  TmnxMsdpPeerEntry  

tmnxMsdpPeerAddressType 1.3.6.1.4.1.6527.3.1.2.43.2.1.1
The value of tmnxMsdpPeerAddressType indicates the type of tmnxMsdpPeerAddress.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddressType  

tmnxMsdpPeerAddress 1.3.6.1.4.1.6527.3.1.2.43.2.1.2
The value of tmnxMsdpPeerAddress indicates the address of the MSDP peer.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddress Size(0|4|16)  

tmnxMsdpPeerRowStatus 1.3.6.1.4.1.6527.3.1.2.43.2.1.3
tmnxMsdpPeerRowStatus is the object used for creating and deleting row entries in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

tmnxMsdpPeerMaxActiveSources 1.3.6.1.4.1.6527.3.1.2.43.2.1.4
The value of tmnxMsdpPeerMaxActiveSources specifies the maximum number of source active messages that will be accepted by MSDP. This effectively controls the number of active sources that can be stored on the system. By default, no limit is placed on the number of source active messages and this is specified by the value '-1'. A value of 0 means that no source active messages will be accepted.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 -1 | 0..1000000  

tmnxMsdpPeerMsgRcvRate 1.3.6.1.4.1.6527.3.1.2.43.2.1.5
The value of tmnxMsdpPeerMsgRcvRate specifies the number of MSDP messages (including source active messages) that are read from the TCP session per tmnxMsdpPeerMsgRcvRateTime seconds. By default, no MSDP messages are read from the TCP session and this is specified by the value 0. Once the number of MSDP packets defined in tmnxMsdpPeerMsgRcvRateThd have been processed the rate of all other MSDP packets is rate limited by no longer accepting messages from the TCP session until tmnxMsdpPeerMsgRcvRateTime seconds have elapsed.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0 | 10..10000  

tmnxMsdpPeerMsgRcvRateTime 1.3.6.1.4.1.6527.3.1.2.43.2.1.6
The value of tmnxMsdpPeerMsgRcvRateTime specifies the time in seconds that together with tmnxMsdpPeerMsgRcvRate defines the number of MSDP messages (including source active messages) that are read from the TCP session within the configured number of seconds. By default, no MSDP messages are read from the TCP session and this is specified by the value 0. Once the number of MSDP packets defined in tmnxMsdpPeerMsgRcvRateThd have been processed the rate of all other MSDP packets is rate limited by no longer accepting messages from the TCP session until tmnxMsdpPeerMsgRcvRateTime seconds have elapsed.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0 | 1..600  

tmnxMsdpPeerMsgRcvRateThd 1.3.6.1.4.1.6527.3.1.2.43.2.1.7
The value of tmnxMsdpPeerMsgRcvRateThd specifies the number of MSDP messages that can be processed before tmnxMsdpPeerMsgRcvRate is set. This is useful during system startup and initialization. By default, no MSDP messages are read from the TCP session and this is specified by the value 0. Once the number of MSDP packets defined in tmnxMsdpPeerMsgRcvRateThd have been processed the rate of all other MSDP packets is rate limited by no longer accepting messages from the TCP session until tmnxMsdpPeerMsgRcvRateTime seconds have elapsed.
Status: current Access: read-create
OBJECT-TYPE    
  Gauge32 0 | 1..1000000  

tmnxMsdpPeerAuthKey 1.3.6.1.4.1.6527.3.1.2.43.2.1.8
The value of tmnxMsdpPeerAuthKey specifies the authentication key to be used for a specific MSDP peering session. Authentication is done using the MD-5 message based digest protocol. Authentication cannot be configured globally and can be applied per peer only. The authentication key can be any combination of letters or numbers. Note that the string may contain embedded nulls. By default, all MSDP messages are accepted and the MD5 signature option authentication key is disabled
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(0..256)  

tmnxMsdpPeerAuthKeyEncrypted 1.3.6.1.4.1.6527.3.1.2.43.2.1.9
When the value of tmnxMsdpPeerAuthKeyEncrypted is 'true', the password specified by tmnxMsdpPeerAuthKey is in the encrypted form. When the value of tmnxMsdpPeerAuthKeyEncrypted is 'false', the password specified by tmnxMsdpPeerAuthKey is in plain text. tmnxMsdpPeerAuthKey and tmnxMsdpPeerAuthKeyEncrypted, which indicates whether or not the password string is encrypted, must be set together in the same SNMP request PDU or else the set request will fail with an inconsistentValue error.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

tmnxMsdpPeerDefaultPeer 1.3.6.1.4.1.6527.3.1.2.43.2.1.10
The value of tmnxMsdpPeerDefaultPeer is used to configure a peer as the default Msdp peer due to which all source-active messages from the peer will be accepted without the usual peer-reverse-path-forwarding (RPF) check.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

tmnxMsdpPeerAdminState 1.3.6.1.4.1.6527.3.1.2.43.2.1.11
The value of tmnxMsdpPeerAdminState specifies the desired administrative state for a MSDP peer. When a MSDP peer is 'outOfService' the operational state of MSDP as well as the operational state of other entities under it, like peer group is also disabled. By default, the state of a MSDP peer is 'inService'.
Status: current Access: read-create
OBJECT-TYPE    
  TmnxAdminState  

tmnxMsdpPeerExportPolicy1 1.3.6.1.4.1.6527.3.1.2.43.2.1.12
The value of tmnxMsdpPeerExportPolicy1 specifies the export policy to export Source Active (SA) state from the SA list into MSDP. A maximum of five policy names can be specified. tmnxMsdpPeerExportPolicy1 specifies policy number 1 at the protocol level. By default no export policies are applied and all SA entries are announced.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

tmnxMsdpPeerExportPolicy2 1.3.6.1.4.1.6527.3.1.2.43.2.1.13
The value of tmnxMsdpPeerExportPolicy2 specifies the export policy to export Source Active (SA) state from the SA list into MSDP. tmnxMsdpPeerExportPolicy2 specifies policy number 2 at the protocol level. By default no export policies are applied and all SA entries are announced.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

tmnxMsdpPeerExportPolicy3 1.3.6.1.4.1.6527.3.1.2.43.2.1.14
The value of tmnxMsdpPeerExportPolicy3 specifies the export policy to export Source Active (SA) state from the SA list into MSDP. tmnxMsdpPeerExportPolicy3 specifies policy number 3 at the protocol level. By default no export policies are applied and all SA entries are announced.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

tmnxMsdpPeerExportPolicy4 1.3.6.1.4.1.6527.3.1.2.43.2.1.15
The value of tmnxMsdpPeerExportPolicy4 specifies the export policy to export Source Active (SA) state from the SA list into MSDP. tmnxMsdpPeerExportPolicy4 specifies policy number 4 at the protocol level. By default no export policies are applied and all SA entries are announced.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

tmnxMsdpPeerExportPolicy5 1.3.6.1.4.1.6527.3.1.2.43.2.1.16
The value of tmnxMsdpPeerExportPolicy5 specifies the export policy to export Source Active (SA) state from the SA list into MSDP. tmnxMsdpPeerExportPolicy1 specifies policy number 5 at the protocol level. By default no export policies are applied and all SA entries are announced.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

tmnxMsdpPeerImportPolicy1 1.3.6.1.4.1.6527.3.1.2.43.2.1.17
The value of tmnxMsdpPeerImportPolicy1 specifies the import policy to import Source Active (SA) state from the SA list into MSDP. A maximum of five policy names can be specified. tmnxMsdpPeerImportPolicy1 specifies policy number 1 at the protocol level. By default no import policies are applied and all SA entries are announced.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

tmnxMsdpPeerImportPolicy2 1.3.6.1.4.1.6527.3.1.2.43.2.1.18
The value of tmnxMsdpPeerImportPolicy2 specifies the import policy to import Source Active (SA) state from the SA list into MSDP. tmnxMsdpPeerImportPolicy2 specifies policy number 2 at the protocol level. By default no import policies are applied and all SA entries are announced.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

tmnxMsdpPeerImportPolicy3 1.3.6.1.4.1.6527.3.1.2.43.2.1.19
The value of tmnxMsdpPeerImportPolicy3 specifies the import policy to import Source Active (SA) state from the SA list into MSDP. tmnxMsdpPeerImportPolicy3 specifies policy number 3 at the protocol level. By default no import policies are applied and all SA entries are announced.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

tmnxMsdpPeerImportPolicy4 1.3.6.1.4.1.6527.3.1.2.43.2.1.20
The value of tmnxMsdpPeerImportPolicy4 specifies the import policy to import Source Active (SA) state from the SA list into MSDP. tmnxMsdpPeerImportPolicy4 specifies policy number 4 at the protocol level. By default no import policies are applied and all SA entries are announced.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

tmnxMsdpPeerImportPolicy5 1.3.6.1.4.1.6527.3.1.2.43.2.1.21
The value of tmnxMsdpPeerImportPolicy5 specifies the import policy to import Source Active (SA) state from the SA list into MSDP. tmnxMsdpPeerImportPolicy5 specifies policy number 5 at the protocol level. By default no import policies are applied and all SA entries are announced.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

tmnxMsdpPeerLocalAddressType 1.3.6.1.4.1.6527.3.1.2.43.2.1.22
The value of tmnxMsdpPeerLocalAddressType is used to configure the type of tmnxMsdpPeerLocalAddress.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddressType  

tmnxMsdpPeerLocalAddress 1.3.6.1.4.1.6527.3.1.2.43.2.1.23
The value of tmnxMsdpPeerLocalAddress is used to configure the local end of a MSDP session. In order for MSDP to function at least one peer must be configured. When configuring a peer, the local end of the MSDP session must be configured. This address is used to validate incoming connections to the peer and to establish connections to the remote peer. By default no local address is configured.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddress Size(0|4|16)  

tmnxMsdpPeerState 1.3.6.1.4.1.6527.3.1.2.43.2.1.24
The value of tmnxMsdpPeerState indicates the status of the connection.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER listen(0), established(1), inactive(2), disabled(3), connecting(4)  

tmnxMsdpPeerLastUpOrDown 1.3.6.1.4.1.6527.3.1.2.43.2.1.25
The value of tmnxMsdpPeerLastUpOrDown indicates the time at which the most recent peer-state change occurred.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tmnxMsdpPeerConRetry 1.3.6.1.4.1.6527.3.1.2.43.2.1.26
The value of tmnxMsdpPeerConRetry indicates number of peer connection retry attempts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tmnxMsdpPeerStateTimer 1.3.6.1.4.1.6527.3.1.2.43.2.1.27
The value of tmnxMsdpPeerStateTimer indicates the number of seconds to wait before another message is sent to a peer.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

tmnxMsdpPeerTimeout 1.3.6.1.4.1.6527.3.1.2.43.2.1.28
The value of tmnxMsdpPeerTimeout indicates the number of seconds to wait for a response from the peer before declaring the peer unavailable.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

tmnxMsdpPeerSAAccepted 1.3.6.1.4.1.6527.3.1.2.43.2.1.29
The value of tmnxMsdpPeerSAAccepted indicates the number of entries in the source-active cache accepted from the peer.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

tmnxMsdpPeerSARecvd 1.3.6.1.4.1.6527.3.1.2.43.2.1.30
The value of tmnxMsdpPeerSARecvd indicates the number of entries in the source-active cache received by the peer.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

tmnxMsdpPeerLastASLimit 1.3.6.1.4.1.6527.3.1.2.43.2.1.31
The value of tmnxMsdpPeerLastASLimit indicates the time that the last active source limit was triggered.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tmnxMsdpPeerGroupTable 1.3.6.1.4.1.6527.3.1.2.43.3
The tmnxMsdpPeerGroupTable provides a listing of all MSDP Peer Groups.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TmnxMsdpPeerGroupEntry

tmnxMsdpPeerGroupEntry 1.3.6.1.4.1.6527.3.1.2.43.3.1
tmnxMsdpPeerGroupEntry represents a MSDP Peer Group. Entries can be created and deleted via SNMP SET operations.
Status: current Access: not-accessible
OBJECT-TYPE    
  TmnxMsdpPeerGroupEntry  

tmnxMsdpPeerGroupName 1.3.6.1.4.1.6527.3.1.2.43.3.1.1
The value of tmnxMsdpPeerGroupName indicates the peer group name.
Status: current Access: not-accessible
OBJECT-TYPE    
  TNamedItem  

tmnxMsdpPeerGroupRowStatus 1.3.6.1.4.1.6527.3.1.2.43.3.1.2
tmnxMsdpPeerGroupRowStatus is the object used for creating and deleting row entries in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

tmnxMsdpPeerGroupMsgRcvRate 1.3.6.1.4.1.6527.3.1.2.43.3.1.3
The value of tmnxMsdpPeerGroupMsgRcvRate specifies the number of MSDP messages (including source active messages) that are read from the TCP session per tmnxMsdpMsgRcvRateTime seconds By default, no MSDP messages are read from the TCP session and this is specified by the value 0. Once the number of MSDP packets defined in tmnxMsdpMsgRcvRateThd have been processed the rate of all other MSDP packets is rate limited by no longer accepting messages from the TCP session until tmnxMsdpMsgRcvRateTime seconds have elapsed.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0 | 10..10000  

tmnxMsdpPeerGroupMsgRcvRateTime 1.3.6.1.4.1.6527.3.1.2.43.3.1.4
The value of tmnxMsdpPeerGroupMsgRcvRateTime specifies the maximum number of source active messages that will be accepted by MSDP. This effectively controls the number of source active messages that can be stored on the system. By default, no MSDP messages are read from the TCP session and this is specified by the value 0. Once the number of MSDP packets defined in tmnxMsdpPeerGroupMsgRcvRateThd have been processed the rate of all other MSDP packets is rate limited by no longer accepting messages from the TCP session until tmnxMsdpPeerGroupMsgRcvRateTime seconds have elapsed.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0 | 1..600  

tmnxMsdpPeerGroupMsgRcvRateThd 1.3.6.1.4.1.6527.3.1.2.43.3.1.5
The value of tmnxMsdpPeerGroupMsgRcvRateThd specifies the number of MSDP messages that can be processed before tmnxMsdpPeerGroupMsgRcvRate is set. This is useful during system startup and initialization. By default, no MSDP messages are read from the TCP session and this is specified by the value 0. Once the number of MSDP packets defined in tmnxMsdpPeerGroupMsgRcvRateThd have been processed the rate of all other MSDP packets is rate limited by no longer accepting messages from the TCP session until tmnxMsdpPeerGroupMsgRcvRateTime seconds have elapsed.
Status: current Access: read-create
OBJECT-TYPE    
  Gauge32 0 | 1..1000000  

tmnxMsdpPeerGroupAdminState 1.3.6.1.4.1.6527.3.1.2.43.3.1.6
The value of tmnxMsdpPeerGroupAdminState specifies the desired administrative state for a MSDP peer group. When tmnxMsdpPeerGroupAdminState is 'outOfService' the operational state of the MSDP peer group as well as the operational state of other entities under it, like other peers is also disabled. By default, the state of a MSDP peer group is 'inService'.
Status: current Access: read-create
OBJECT-TYPE    
  TmnxAdminState  

tmnxMsdpPeerGroupExportPolicy1 1.3.6.1.4.1.6527.3.1.2.43.3.1.7
The value of tmnxMsdpPeerGroupExportPolicy1 specifies the export policy number 1 at peer group level.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

tmnxMsdpPeerGroupExportPolicy2 1.3.6.1.4.1.6527.3.1.2.43.3.1.8
The value of tmnxMsdpPeerGroupExportPolicy2 specifies the export policy number 2 at peer group protocol level.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

tmnxMsdpPeerGroupExportPolicy3 1.3.6.1.4.1.6527.3.1.2.43.3.1.9
The value of tmnxMsdpPeerGroupExportPolicy3 specifies the export policy number 3 at peer group protocol level.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

tmnxMsdpPeerGroupExportPolicy4 1.3.6.1.4.1.6527.3.1.2.43.3.1.10
The value of tmnxMsdpPeerGroupExportPolicy4 specifies the export policy number 4 at peer group protocol level.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

tmnxMsdpPeerGroupExportPolicy5 1.3.6.1.4.1.6527.3.1.2.43.3.1.11
The value of tmnxMsdpPeerGroupExportPolicy5 specifies the export policy number 5 at peer group protocol level.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

tmnxMsdpPeerGroupImportPolicy1 1.3.6.1.4.1.6527.3.1.2.43.3.1.12
The value of tmnxMsdpPeerGroupImportPolicy1 specifies the import policy number 1 at peer group level.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

tmnxMsdpPeerGroupImportPolicy2 1.3.6.1.4.1.6527.3.1.2.43.3.1.13
The value of tmnxMsdpPeerGroupImportPolicy2 specifies the import policy number 2 at peer group level.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

tmnxMsdpPeerGroupImportPolicy3 1.3.6.1.4.1.6527.3.1.2.43.3.1.14
The value of tmnxMsdpPeerGroupImportPolicy3 specifies the import policy number 3 at peer group level.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

tmnxMsdpPeerGroupImportPolicy4 1.3.6.1.4.1.6527.3.1.2.43.3.1.15
The value of tmnxMsdpPeerGroupImportPolicy4 specifies the import policy number 4 at peer group level.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

tmnxMsdpPeerGroupImportPolicy5 1.3.6.1.4.1.6527.3.1.2.43.3.1.16
The value of tmnxMsdpPeerGroupImportPolicy5 specifies the import policy number 5 at peer group level.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

tmnxMsdpPeerGroupLocalAddrType 1.3.6.1.4.1.6527.3.1.2.43.3.1.17
The value of tmnxMsdpPeerGroupLocalAddrType is used to configure the type of tmnxMsdpPeerGroupLocalAddress.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddressType  

tmnxMsdpPeerGroupLocalAddress 1.3.6.1.4.1.6527.3.1.2.43.3.1.18
The value of tmnxMsdpPeerGroupLocalAddress is used to configure the local end of a MSDP session. In order for MSDP to function at least one peer must be configured. When configuring a peer, the local end of the MSDP session must be configured. This address is used to validate incoming connections to the peer and to establish connections to the remote peer. By default no local address is configured.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddress Size(0|4|16)  

tmnxMsdpPeerGroupMode 1.3.6.1.4.1.6527.3.1.2.43.3.1.19
The value of tmnxMsdpPeerGroupMode is used to configure groups of peers in a full mesh topology. MSDP peers can be grouped in a full-mesh topology that prevents excessive flooding of source-active messages to neighboring peers. When operating in meshed mode, source-active messages received from a mesh group member are always accepted but are not flooded to other members of the same mesh group. As a result, these source-active messages are only flooded to non-mesh group peers or members of other mesh groups. By default 'standard' (non-meshed) mode is used.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER standard(1), mesh-group(2)  

tmnxMsdpPeerGroupMaxActSources 1.3.6.1.4.1.6527.3.1.2.43.3.1.20
The value of tmnxMsdpPeerGroupMaxActSources specifies the maximum number of source active messages that will be accepted by this MSDP peer group. This effectively controls the number of active sources that can be stored on the system. By default, no limit is placed on the number of source active messages and this is specified by the value '-1'. A value of 0 means that no source active messages will be accepted.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 -1 | 0..1000000  

tmnxMsdpPeerGroupActMsgsExMax 1.3.6.1.4.1.6527.3.1.2.43.3.1.21
The value of tmnxMsdpPeerGroupActMsgsExMax indicates the number of source active messages received from this group that exceeded the established maximum number.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tmnxMsdpPeerGrpSARejExpPolicy 1.3.6.1.4.1.6527.3.1.2.43.3.1.22
The value of tmnxMsdpPeerGrpSARejExpPolicy indicates the number of source active messages received from this group that were were not sent due to export policy.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tmnxMsdpPeerGrpSARejImpPolicy 1.3.6.1.4.1.6527.3.1.2.43.3.1.23
The value of tmnxMsdpPeerGrpSARejImpPolicy indicates the number of source active messages received from this group that were rejected due to import policy.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tmnxMsdpPeerGrpPeerTable 1.3.6.1.4.1.6527.3.1.2.43.4
The tmnxMsdpPeerGrpPeerTable table provides a listing of all peers under MSDP Peer Groups.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TmnxMsdpPeerGrpPeerEntry

tmnxMsdpPeerGrpPeerEntry 1.3.6.1.4.1.6527.3.1.2.43.4.1
An entry representing a peer in an MSDP Peer Group. Entries can be created and deleted via SNMP SET operations.
Status: current Access: not-accessible
OBJECT-TYPE    
  TmnxMsdpPeerGrpPeerEntry  

tmnxMsdpPeerGrpPeerAddressType 1.3.6.1.4.1.6527.3.1.2.43.4.1.1
The value of tmnxMsdpPeerGrpPeerAddressType indicates the type of address of the MSDP peer.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddressType  

tmnxMsdpPeerGrpPeerAddress 1.3.6.1.4.1.6527.3.1.2.43.4.1.2
The value of tmnxMsdpPeerGrpPeerAddress indicates the address of the MSDP peer.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddress Size(0|4|16)  

tmnxMsdpPeerGrpPeerRowStatus 1.3.6.1.4.1.6527.3.1.2.43.4.1.3
tmnxMsdpPeerGrpPeerRowStatus is the object used for creating and deleting row entries in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

tmnxMsdpPeerGrpPeerMaxActSrcs 1.3.6.1.4.1.6527.3.1.2.43.4.1.4
The value of tmnxMsdpPeerGrpPeerMaxActSrcs specifies the maximum number of source active messages that will be accepted by MSDP peer group peer. This effectively controls the number of active sources that can be stored on the system. By default, no limit is placed on the number of source active messages and this is specified by the value '-1'. A value of 0 means that no source active messages will be accepted.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 -1 | 0..1000000  

tmnxMsdpPeerGrpPeerMsgRcvRt 1.3.6.1.4.1.6527.3.1.2.43.4.1.5
The value of tmnxMsdpPeerGrpPeerMsgRcvRt specifies the number of MSDP messages (including source active messages) that are read from the TCP session per tmnxMsdpPeerGrpPeerMsgRcvRtTime seconds. By default, no MSDP messages are read from the TCP session and this is specified by the value 0. Once the number of MSDP packets defined in tmnxMsdpPeerGrpPeerMsgRcvRtThd have been processed the rate of all other MSDP packets is rate limited by no longer accepting messages from the TCP session until tmnxMsdpPeerGrpPeerMsgRcvRtTime seconds have elapsed.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0 | 10..10000  

tmnxMsdpPeerGrpPeerMsgRcvRtTime 1.3.6.1.4.1.6527.3.1.2.43.4.1.6
The value of tmnxMsdpPeerGrpPeerMsgRcvRtTime specifies the time in seconds that together with tmnxMsdpPeerGrpPeerMsgRcvRt defines the number of MSDP messages (including source active messages) that are read from the TCP session within the configured number of seconds. By default, no MSDP messages are read from the TCP session and this is specified by the value 0. Once the number of MSDP packets defined in tmnxMsdpPeerGrpPeerMsgRcvRtThd have been processed the rate of all other MSDP packets is rate limited by no longer accepting messages from the TCP session until tmnxMsdpPeerGrpPeerMsgRcvRtTime seconds have elapsed.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0 | 1..600  

tmnxMsdpPeerGrpPeerMsgRcvRtThd 1.3.6.1.4.1.6527.3.1.2.43.4.1.7
The value of tmnxMsdpPeerGrpPeerMsgRcvRtThd specifies the number of MSDP messages that can be processed before tmnxMsdpPeerGrpPeerMsgRcvRt is set. This is useful during system startup and initialization. By default, no MSDP messages are read from the TCP session and this is specified by the value 0. Once the number of MSDP packets defined in tmnxMsdpPeerGrpPeerMsgRcvRtThd have been processed the rate of all other MSDP packets is rate limited by no longer accepting messages from the TCP session until tmnxMsdpPeerGrpPeerMsgRcvRtTime seconds have elapsed.
Status: current Access: read-create
OBJECT-TYPE    
  Gauge32 0 | 1..1000000  

tmnxMsdpPeerGrpPeerAuthKey 1.3.6.1.4.1.6527.3.1.2.43.4.1.8
The value of tmnxMsdpPeerGrpPeerAuthKey specifies the authentication key to be used for a specific MSDP peer group peering session. Authentication is done using the MD-5 message based digest protocol. Authentication cannot be configured globally and can be applied per peer only. The authentication key can be any combination of letters or numbers. Note that the string may contain embedded nulls. By default all MSDP messages are accepted and the MD5 signature option authentication key is disabled
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(0..256)  

tmnxMsdpPeerGrpPeerAKeyEncrypt 1.3.6.1.4.1.6527.3.1.2.43.4.1.9
When the value of tmnxMsdpPeerGrpPeerAKeyEncrypt is 'true', the password specified by tmnxMsdpPeerGrpPeerAuthKey is in the encrypted form. When the value of tmnxMsdpPeerGrpPeerAKeyEncrypt is 'false', the password specified by tmnxMsdpPeerGrpPeerAuthKey is in plain text. tmnxMsdpPeerGrpPeerAuthKey and tmnxMsdpPeerGrpPeerAKeyEncrypt, which indicates whether or not the password string is encrypted, must be set together in the same SNMP request PDU or else the set request will fail with an inconsistentValue error.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

tmnxMsdpPeerGrpPeerDefaultPeer 1.3.6.1.4.1.6527.3.1.2.43.4.1.10
The value of tmnxMsdpPeerGrpPeerDefaultPeer is used to configure a peer as the default MSDP peer due to which all source-active messages from the peer will be accepted without the usual peer-reverse-path-forwarding (RPF) check.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

tmnxMsdpPeerGrpPeerAdminState 1.3.6.1.4.1.6527.3.1.2.43.4.1.11
The value of tmnxMsdpPeerGrpPeerAdminState specifies the desired administrative state for a peer under a MSDP peer group. When tmnxMsdpPeerGrpPeerAdminState is 'outOfService' the operational state of the MSDP peer is disabled. By default, tmnxMsdpPeerGrpPeerAdminState is 'inService'.
Status: current Access: read-create
OBJECT-TYPE    
  TmnxAdminState  

tmnxMsdpPeerGrpPeerExportPolicy1 1.3.6.1.4.1.6527.3.1.2.43.4.1.12
The value of tmnxMsdpPeerGrpPeerExportPolicy1 specifies the export policy to export Source Active (SA) state from the SA list into MSDP. A maximum of five policy names can be specified. tmnxMsdpPeerGrpPeerExportPolicy1 specifies policy number 1 at the protocol level. By default no export policies are applied and all SA entries are announced.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

tmnxMsdpPeerGrpPeerExportPolicy2 1.3.6.1.4.1.6527.3.1.2.43.4.1.13
The value of tmnxMsdpPeerGrpPeerExportPolicy2 specifies the export policy to export Source Active (SA) state from the SA list into MSDP. tmnxMsdpPeerGrpPeerExportPolicy2 specifies policy number 2 at the protocol level. By default no export policies are applied and all SA entries are announced.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

tmnxMsdpPeerGrpPeerExportPolicy3 1.3.6.1.4.1.6527.3.1.2.43.4.1.14
The value of tmnxMsdpPeerGrpPeerExportPolicy3 specifies the export policy to export Source Active (SA) state from the SA list into MSDP. tmnxMsdpPeerGrpPeerExportPolicy3 specifies policy number 3 at the protocol level. By default no export policies are applied and all SA entries are announced.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

tmnxMsdpPeerGrpPeerExportPolicy4 1.3.6.1.4.1.6527.3.1.2.43.4.1.15
The value of tmnxMsdpPeerGrpPeerExportPolicy4 specifies the export policy to export Source Active (SA) state from the SA list into MSDP. tmnxMsdpPeerGrpPeerExportPolicy4 specifies policy number 4 at the protocol level. By default no export policies are applied and all SA entries are announced.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

tmnxMsdpPeerGrpPeerExportPolicy5 1.3.6.1.4.1.6527.3.1.2.43.4.1.16
The value of tmnxMsdpPeerGrpPeerExportPolicy5 specifies the export policy to export Source Active (SA) state from the SA list into MSDP. tmnxMsdpPeerGrpPeerExportPolicy1 specifies policy number 5 at the protocol level. By default no export policies are applied and all SA entries are announced.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

tmnxMsdpPeerGrpPeerImportPolicy1 1.3.6.1.4.1.6527.3.1.2.43.4.1.17
The value of tmnxMsdpPeerGrpPeerImportPolicy1 specifies the import policy to import Source Active (SA) state from the SA list into MSDP. A maximum of five policy names can be specified. tmnxMsdpPeerGrpPeerImportPolicy1 specifies policy number 1 at the protocol level. By default no import policies are applied and all SA entries are announced.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

tmnxMsdpPeerGrpPeerImportPolicy2 1.3.6.1.4.1.6527.3.1.2.43.4.1.18
The value of tmnxMsdpPeerGrpPeerImportPolicy2 specifies the import policy to import Source Active (SA) state from the SA list into MSDP. tmnxMsdpPeerGrpPeerImportPolicy2 specifies policy number 2 at the protocol level. By default no import policies are applied and all SA entries are announced.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

tmnxMsdpPeerGrpPeerImportPolicy3 1.3.6.1.4.1.6527.3.1.2.43.4.1.19
The value of tmnxMsdpPeerGrpPeerImportPolicy3 specifies the import policy to import Source Active (SA) state from the SA list into MSDP. tmnxMsdpPeerGrpPeerImportPolicy3 specifies policy number 3 at the protocol level. By default no import policies are applied and all SA entries are announced.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

tmnxMsdpPeerGrpPeerImportPolicy4 1.3.6.1.4.1.6527.3.1.2.43.4.1.20
The value of tmnxMsdpPeerGrpPeerImportPolicy4 specifies the import policy to import Source Active (SA) state from the SA list into MSDP. tmnxMsdpPeerGrpPeerImportPolicy4 specifies policy number 4 at the protocol level. By default no import policies are applied and all SA entries are announced.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

tmnxMsdpPeerGrpPeerImportPolicy5 1.3.6.1.4.1.6527.3.1.2.43.4.1.21
The value of tmnxMsdpPeerGrpPeerImportPolicy5 specifies the import policy to import Source Active (SA) state from the SA list into MSDP. tmnxMsdpPeerGrpPeerImportPolicy5 specifies policy number 5 at the protocol level. By default no import policies are applied and all SA entries are announced.
Status: current Access: read-create
OBJECT-TYPE    
  TPolicyStatementNameOrEmpty  

tmnxMsdpPeerGrpPeerLocAddrType 1.3.6.1.4.1.6527.3.1.2.43.4.1.22
The value of tmnxMsdpPeerGrpPeerLocAddrType indicates the type of tmnxMsdpPeerGrpPeerLocalAddress.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddressType  

tmnxMsdpPeerGrpPeerLocalAddress 1.3.6.1.4.1.6527.3.1.2.43.4.1.23
The value of tmnxMsdpPeerGrpPeerLocalAddress is used to configure the local end of a MSDP session. In order for MSDP to function at least one peer must be configured. When configuring a peer, the local end of the MSDP session must be configured. This address is used to validate incoming connections to the peer and to establish connections to the remote peer. By default no local address is configured.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddress Size(0|4|16)  

tmnxMsdpPeerGrpPeerState 1.3.6.1.4.1.6527.3.1.2.43.4.1.24
The value of tmnxMsdpPeerGrpPeerState indicates the status of the connection.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER listen(0), established(1), inactive(2), disabled(3), connecting(4)  

tmnxMsdpPeerGrpPeerLastUpOrDown 1.3.6.1.4.1.6527.3.1.2.43.4.1.25
The value of tmnxMsdpPeerGrpPeerLastUpOrDown indicates the time at which the most recent peer-state change occurred.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tmnxMsdpPeerGrpPeerConRetry 1.3.6.1.4.1.6527.3.1.2.43.4.1.26
The value of tmnxMsdpPeerGrpPeerConRetry indicates number of peer connection retry attempts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tmnxMsdpPeerGrpPeerStateTimer 1.3.6.1.4.1.6527.3.1.2.43.4.1.27
The value of tmnxMsdpPeerGrpPeerStateTimer indicates the number of seconds to wait before another message is sent to a peer.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

tmnxMsdpPeerGrpPeerTimeout 1.3.6.1.4.1.6527.3.1.2.43.4.1.28
The value of tmnxMsdpPeerGrpPeerTimeout indicates the number of seconds to wait for a response from the peer before declaring the peer unavailable.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

tmnxMsdpPeerGrpPeerSAAccepted 1.3.6.1.4.1.6527.3.1.2.43.4.1.29
The value of tmnxMsdpPeerGrpPeerSAAccepted indicates the number of entries in the source-active cache accepted from the peer.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

tmnxMsdpPeerGrpPeerSARecvd 1.3.6.1.4.1.6527.3.1.2.43.4.1.30
The value of tmnxMsdpPeerGrpPeerSARecvd indicates the number of entries in the source-active cache received by the peer.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

tmnxMsdpPeerGrpPeerLastASLimit 1.3.6.1.4.1.6527.3.1.2.43.4.1.31
The value of tmnxMsdpPeerGrpPeerLastASLimit indicates the time that the last active source limit was triggered.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tmnxMsdpSourceTable 1.3.6.1.4.1.6527.3.1.2.43.5
The tmnxMsdpSourceTable provides a listing of all MSDP Source configuration.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TmnxMsdpSourceEntry

tmnxMsdpSourceEntry 1.3.6.1.4.1.6527.3.1.2.43.5.1
An tmnxMsdpSourceEntry represents a MSDP Source configuration. Entries can be created and deleted via SNMP SET operations.
Status: current Access: not-accessible
OBJECT-TYPE    
  TmnxMsdpSourceEntry  

tmnxMsdpSourcePrefixType 1.3.6.1.4.1.6527.3.1.2.43.5.1.1
The value of tmnxMsdpSourcePrefixType indicates the type of tmnxMsdpSourcePrefix.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddressType  

tmnxMsdpSourcePrefix 1.3.6.1.4.1.6527.3.1.2.43.5.1.2
The value of tmnxMsdpSourcePrefix indicates the IP address of the sources from which the source active messages would be accepted.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddress Size(0|4|16)  

tmnxMsdpSourceMask 1.3.6.1.4.1.6527.3.1.2.43.5.1.3
The value of tmnxMsdpSourceMask indicates the mask to be used along with tmnxMsdpSourcePrefix to obtain the range of addresses from which the router can accept source active messages.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddressPrefixLength  

tmnxMsdpSourceRowStatus 1.3.6.1.4.1.6527.3.1.2.43.5.1.4
tmnxMsdpSourceRowStatus is the object used for creating and deleting row entries in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

tmnxMsdpSourceMaxActiveSources 1.3.6.1.4.1.6527.3.1.2.43.5.1.5
The value of tmnxMsdpSourceMaxActiveSources specifies the maximum number of source active messages that will be accepted by MSDP. This effectively controls the number of active sources that can be stored on the system. By default, no limit is placed on the number of source active messages and this is specified by the value '-1'. A value of 0 means that no source active messages will be accepted.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 -1 | 0..1000000  

tmnxMsdpSourceDiscMethod 1.3.6.1.4.1.6527.3.1.2.43.5.1.6
The value of tmnxMsdpSourceDiscMethod indicates the discovery method for this multicast source. If the source entry was created by an user, the value of this field is 'configured'. If the source was created dynamically, the value is 'dynamic'
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER dynamic(0), configured(1)  

tmnxMsdpSourceSrcActMsgsExMax 1.3.6.1.4.1.6527.3.1.2.43.5.1.7
The value of tmnxMsdpSourceSrcActMsgsExMax indicates the number of source active messages received from this source that exceeded the established maximum number.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tmnxMsdpSourceLastExEventTime 1.3.6.1.4.1.6527.3.1.2.43.5.1.8
The value of tmnxMsdpSourceLastExEventTime indicates the time the last exceed event was triggered.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

tmnxMsdpSrcActiveTable 1.3.6.1.4.1.6527.3.1.2.43.6
The tmnxMsdpSrcActiveTable table stores the MSDP Source Active(SA) advertisements currently in the MSDP speaker's cache.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TmnxMsdpSrcActiveEntry

tmnxMsdpSrcActiveEntry 1.3.6.1.4.1.6527.3.1.2.43.6.1
An entry representing an MSDP SA advertisement. The INDEX to this table includes msdpSACacheOriginRP for diagnosing incorrect MSDP advertisements; normally a Source and Group pair would be unique. This is a read-only table.
Status: current Access: not-accessible
OBJECT-TYPE    
  TmnxMsdpSrcActiveEntry  

tmnxMsdpSrcActiveGroupAddrType 1.3.6.1.4.1.6527.3.1.2.43.6.1.1
The value of tmnxMsdpSrcActiveGroupAddrType indicates the address type of tmnxMsdpSrcActiveGroupAddr.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddressType  

tmnxMsdpSrcActiveGroupAddr 1.3.6.1.4.1.6527.3.1.2.43.6.1.2
The value of tmnxMsdpSrcActiveGroupAddr indicates the group address of the Source Active entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddress Size(0|4|16)  

tmnxMsdpSrcActiveSourceAddrType 1.3.6.1.4.1.6527.3.1.2.43.6.1.3
The value of tmnxMsdpSrcActiveSourceAddrType indicates the address type of tmnxMsdpSrcActiveSourceAddr.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddressType  

tmnxMsdpSrcActiveSourceAddr 1.3.6.1.4.1.6527.3.1.2.43.6.1.4
The value of tmnxMsdpSrcActiveSourceAddr indicates the source address of the Source Active entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddress Size(0|4|16)  

tmnxMsdpSrcActiveOriginRPType 1.3.6.1.4.1.6527.3.1.2.43.6.1.5
The value of tmnxMsdpSrcActiveOriginRPType indicates the address type of tmnxMsdpSrcActiveOriginRP.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddressType  

tmnxMsdpSrcActiveOriginRP 1.3.6.1.4.1.6527.3.1.2.43.6.1.6
The value of tmnxMsdpSrcActiveOriginRP indicates the origin RP address of the Source Active entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddress Size(0|4|16)  

tmnxMsdpSrcActivePrLearnFrType 1.3.6.1.4.1.6527.3.1.2.43.6.1.7
The value of tmnxMsdpSrcActivePrLearnFrType indicates the address type of tmnxMsdpSrcActivePeerLearntFrom.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressType  

tmnxMsdpSrcActivePeerLearntFrom 1.3.6.1.4.1.6527.3.1.2.43.6.1.8
The value of tmnxMsdpSrcActivePeerLearntFrom indicates the peer from which this Source Active entry was last accepted.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddress Size(0|4|16)  

tmnxMsdpSrcActiveRPFPeerType 1.3.6.1.4.1.6527.3.1.2.43.6.1.9
The value of tmnxMsdpSrcActiveRPFPeerType indicates the address type of tmnxMsdpSrcActiveRPFPeer.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressType  

tmnxMsdpSrcActiveRPFPeer 1.3.6.1.4.1.6527.3.1.2.43.6.1.10
The value of tmnxMsdpSrcActiveRPFPeer indicates the peer from which an SA message corresponding to this cache entry would be accepted (i.e. the RPF peer for tmnxMsdpSrcActiveOriginRP). This may be different than tmnxMsdpSrcActivePeerLearntFrom if this entry was created by an MSDP SA-Response.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddress Size(0|4|16)  

tmnxMsdpSrcActiveUpTime 1.3.6.1.4.1.6527.3.1.2.43.6.1.11
The value of tmnxMsdpSrcActiveUpTime indicates the time since this entry was first placed in the Source Active (SA) cache. It is the difference between the time that the entry was first placed in the SA cache and the current time.
Status: current Access: read-only
OBJECT-TYPE    
  TimeInterval  

tmnxMsdpSrcActiveExpiryTime 1.3.6.1.4.1.6527.3.1.2.43.6.1.12
The value of tmnxMsdpSrcActiveExpiryTime indicates the time remaining before this entry will expire from the Source Active (SA) cache. It is difference between the current time and the time that the entry will expire.
Status: current Access: read-only
OBJECT-TYPE    
  TimeInterval  

tmnxMsdpPeerStatsTable 1.3.6.1.4.1.6527.3.1.2.43.7
The table tmnxMsdpPeerStatsTable is the statistics information related to a MSDP peer.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TmnxMsdpPeerStatsEntry

tmnxMsdpPeerStatsEntry 1.3.6.1.4.1.6527.3.1.2.43.7.1
tmnxMsdpPeerStatsEntry is an entry (conceptual row) in the tmnxMsdpPeerStatsTable. Each entry represents a MSDP peer related statistics information.
Status: current Access: not-accessible
OBJECT-TYPE    
  TmnxMsdpPeerStatsEntry  

tmnxMsdpPeerStatsActSrcLimExcd 1.3.6.1.4.1.6527.3.1.2.43.7.1.1
The value of tmnxMsdpPeerStatsActSrcLimExcd indicates the number of times the global active source limit has been exceeded by this peer instance.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tmnxMsdpPeerStatsLastStChange 1.3.6.1.4.1.6527.3.1.2.43.7.1.2
The value of tmnxMsdpPeerStatsLastStChange indicates how long ago the peer state changed.
Status: current Access: read-only
OBJECT-TYPE    
  TimeInterval  

tmnxMsdpPeerStatsLastMsgPeer 1.3.6.1.4.1.6527.3.1.2.43.7.1.3
The value of tmnxMsdpPeerStatsLastMsgPeer indicates how long ago the last message was received from this peer instance.
Status: current Access: read-only
OBJECT-TYPE    
  TimeInterval  

tmnxMsdpPeerStatsRPFFailures 1.3.6.1.4.1.6527.3.1.2.43.7.1.4
The value of tmnxMsdpPeerStatsRPFFailures indicates number of reverse path forwarding (RPF) failures.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tmnxMsdpPeerStatsRemoteCloses 1.3.6.1.4.1.6527.3.1.2.43.7.1.5
The value of tmnxMsdpPeerStatsRemoteCloses indicates the number of times the remote peer closed.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tmnxMsdpPeerStatsPeerTimeouts 1.3.6.1.4.1.6527.3.1.2.43.7.1.6
The value of tmnxMsdpPeerStatsPeerTimeouts indicates the number of peer timeouts.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tmnxMsdpPeerStatsSAMsgsSent 1.3.6.1.4.1.6527.3.1.2.43.7.1.7
The value of tmnxMsdpPeerStatsSAMsgsSent indicates the number of source-active messages sent.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tmnxMsdpPeerStatsSAMsgsRecvd 1.3.6.1.4.1.6527.3.1.2.43.7.1.8
The value of tmnxMsdpPeerStatsSAMsgsRecvd indicates the number of source-active messages received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tmnxMsdpPeerStatsSAReqMsgsSent 1.3.6.1.4.1.6527.3.1.2.43.7.1.9
The value of tmnxMsdpPeerStatsSAReqMsgsSent indicates the number of source-active request messages sent.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tmnxMsdpPeerStatsSAReqMsgsRecvd 1.3.6.1.4.1.6527.3.1.2.43.7.1.10
The value of tmnxMsdpPeerStatsSAReqMsgsRecvd indicates the number of source-active request messages received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tmnxMsdpPeerStatsSAResMsgsSent 1.3.6.1.4.1.6527.3.1.2.43.7.1.11
The value of tmnxMsdpPeerStatsSAResMsgsSent indicates the number of source-active response messages sent.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tmnxMsdpPeerStatsSAResMsgsRecvd 1.3.6.1.4.1.6527.3.1.2.43.7.1.12
The value of tmnxMsdpPeerStatsSAResMsgsRecvd indicates the number of source-active response messages received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tmnxMsdpPeerStatsKAMsgsSent 1.3.6.1.4.1.6527.3.1.2.43.7.1.13
The value of tmnxMsdpPeerStatsKAMsgsSent indicates the number of keep-alive messages sent.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tmnxMsdpPeerStatsKAMsgsRecvd 1.3.6.1.4.1.6527.3.1.2.43.7.1.14
The value of tmnxMsdpPeerStatsKAMsgsRecvd indicates the number of keep-alive messages received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tmnxMsdpPeerStatsUnknMsgsRecvd 1.3.6.1.4.1.6527.3.1.2.43.7.1.15
The value of tmnxMsdpPeerStatsUnknMsgsRecvd indicates the number of unknown messages received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tmnxMsdpPeerStatsErrorMsgsRecvd 1.3.6.1.4.1.6527.3.1.2.43.7.1.16
The value of tmnxMsdpPeerStatsErrorMsgsRecvd indicates number of error messages received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tmnxMsdpPeerStatsSALearnt 1.3.6.1.4.1.6527.3.1.2.43.7.1.17
The value of tmnxMsdpPeerStatsSALearnt indicates the number of unique source active entries in the cache learned from the peer.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

tmnxMsdpPeerStatsSARejExpPolicy 1.3.6.1.4.1.6527.3.1.2.43.7.1.18
The value of tmnxMsdpPeerStatsSARejExpPolicy indicates the number of source active messages from the peer that were not sent due to export policy.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tmnxMsdpPeerStatsSARejImpPolicy 1.3.6.1.4.1.6527.3.1.2.43.7.1.19
The value of tmnxMsdpPeerStatsSARejImpPolicy indicates the number of source active messages from the peer that were rejected due to import policy.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tmnxMsdpPeerStatsResvMsgsRecvd 1.3.6.1.4.1.6527.3.1.2.43.7.1.20
The value of tmnxMsdpPeerStatsResvMsgsRecvd indicates the number of MSDP messages received with type 'Reserved'.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tmnxMsdpSrcActRejTable 1.3.6.1.4.1.6527.3.1.2.43.8
The tmnxMsdpSrcActRejTable table stores the MSDP Source Active(SA) advertisements rejected from the MSDP speaker's cache.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TmnxMsdpSrcActRejEntry

tmnxMsdpSrcActRejEntry 1.3.6.1.4.1.6527.3.1.2.43.8.1
An entry representing an MSDP SA advertisement that is rejected. This is a read-only table.
Status: current Access: not-accessible
OBJECT-TYPE    
  TmnxMsdpSrcActRejEntry  

tmnxMsdpSrcActRejPeerGroupName 1.3.6.1.4.1.6527.3.1.2.43.8.1.1
The value of tmnxMsdpSrcActRejPeerGroupName indicates the peer group name of the Source Active entry that is rejected.
Status: current Access: not-accessible
OBJECT-TYPE    
  TNamedItemOrEmpty  

tmnxMsdpSrcActRejGroupAddrType 1.3.6.1.4.1.6527.3.1.2.43.8.1.2
The value of tmnxMsdpSrcActRejGroupAddrType indicates the address type of tmnxMsdpSrcActRejGroupAddr.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddressType  

tmnxMsdpSrcActRejGroupAddr 1.3.6.1.4.1.6527.3.1.2.43.8.1.3
The value of tmnxMsdpSrcActRejGroupAddr indicates the group address of the Source Active entry that is rejected.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddress Size(4|16)  

tmnxMsdpSrcActRejSourceAddrType 1.3.6.1.4.1.6527.3.1.2.43.8.1.4
The value of tmnxMsdpSrcActRejSourceAddrType indicates the address type of tmnxMsdpSrcActRejSourceAddr.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddressType  

tmnxMsdpSrcActRejSourceAddr 1.3.6.1.4.1.6527.3.1.2.43.8.1.5
The value of tmnxMsdpSrcActRejSourceAddr indicates the source address of the Source Active entry that is rejected.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddress Size(4|16)  

tmnxMsdpSrcActRejOriginRPType 1.3.6.1.4.1.6527.3.1.2.43.8.1.6
The value of tmnxMsdpSrcActRejOriginRPType indicates the address type of tmnxMsdpSrcActRejOriginRP.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddressType  

tmnxMsdpSrcActRejOriginRP 1.3.6.1.4.1.6527.3.1.2.43.8.1.7
The value of tmnxMsdpSrcActRejOriginRP indicates the origin rendezvous point (RP) address of the Source Active entry that is rejected.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddress Size(4|16)  

tmnxMsdpSrcActRejPeerAddrType 1.3.6.1.4.1.6527.3.1.2.43.8.1.8
The value of tmnxMsdpSrcActRejPeerAddrType indicates the address type of tmnxMsdpSrcActRejPeerAddr.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddressType  

tmnxMsdpSrcActRejPeerAddr 1.3.6.1.4.1.6527.3.1.2.43.8.1.9
The value of tmnxMsdpSrcActRejPeerAddr indicates the peer from which this rejected Source Active entry was last received.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddress Size(4|16)  

tmnxMsdpSrcActRejFailureReason 1.3.6.1.4.1.6527.3.1.2.43.8.1.10
The value of tmnxMsdpSrcActRejFailureReason indicates the reason why this Source Active entry is rejected.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER importPolicyFailure(1), exportPolicyFailure(2), rpfFailure(3), actSrcLimitExceeded(4), srcActSrcLimitExceeded(5), peerActSrcLimitExceeded(6), groupActSrcLimitExceeded(7), groupPeerActSrcLimitExceeded(8)  

tmnxMsdpActSrcLimExcd 1.3.6.1.4.1.6527.3.1.3.43.0.1
The tmnxMsdpActSrcLimExcd event is generated whenever the global active source limit has been exceeded.
Status: current Access: read-only
NOTIFICATION-TYPE    

tmnxMsdpPeerActSrcLimExcd 1.3.6.1.4.1.6527.3.1.3.43.0.2
The tmnxMsdpPeerActSrcLimExcd event is generated whenever the active source limit has been exceeded for the peer.
Status: current Access: read-only
NOTIFICATION-TYPE    

tmnxMsdpRPFFailure 1.3.6.1.4.1.6527.3.1.3.43.0.3
The tmnxMsdpRPFFailure event is generated whenever a RPF(Reverse Path Forwarding) failure occurs for a source configured by user.
Status: current Access: read-only
NOTIFICATION-TYPE    

tmnxMsdpSourceSrcActMsgsExcd 1.3.6.1.4.1.6527.3.1.3.43.0.4
The tmnxMsdpSourceSrcActMsgsExcd event is generated when the source active messages received from this source has exceeded the established maximum number.
Status: current Access: read-only
NOTIFICATION-TYPE    

tmnxMsdpGroupSrcActMsgsExcd 1.3.6.1.4.1.6527.3.1.3.43.0.5
The tmnxMsdpGroupSrcActMsgsExcd event is generated when the source active messages received from this group has exceeded the established maximum number.
Status: current Access: read-only
NOTIFICATION-TYPE    

tmnxMsdpCompliance 1.3.6.1.4.1.6527.3.1.1.43.1.1
The compliance statement for management of MSDP features on Alcatel 7x50 SR series systems.
Status: obsolete Access: read-only
MODULE-COMPLIANCE    

tmnxMsdpV10v0Compliance 1.3.6.1.4.1.6527.3.1.1.43.1.2
The compliance statement for management of MSDP features on Alcatel 7x50 SR series systems.
Status: current Access: read-only
MODULE-COMPLIANCE    

tmnxMsdpGlobalGroup 1.3.6.1.4.1.6527.3.1.1.43.2.1
A collection of global objects supporting management of MSDP protocol on Alcatel 7x50 SR series systems.
Status: current Access: read-only
OBJECT-GROUP    

tmnxMsdpPeerGroup 1.3.6.1.4.1.6527.3.1.1.43.2.2
A collection of objects supporting management of MSDP peers on Alcatel 7x50 SR series systems.
Status: current Access: read-only
OBJECT-GROUP    

tmnxMsdpPeerGroupGroup 1.3.6.1.4.1.6527.3.1.1.43.2.3
A collection of objects supporting management of MSDP peer groups on Alcatel 7x50 SR series systems.
Status: current Access: read-only
OBJECT-GROUP    

tmnxMsdpSourceGroup 1.3.6.1.4.1.6527.3.1.1.43.2.4
A collection of objects supporting management of MSDP sources on Alcatel 7x50 SR series systems.
Status: current Access: read-only
OBJECT-GROUP    

tmnxMsdpSrcActiveGroup 1.3.6.1.4.1.6527.3.1.1.43.2.5
A collection of objects supporting management of MSDP source active information on Alcatel 7x50 SR series systems.
Status: current Access: read-only
OBJECT-GROUP    

tmnxMsdpNotificationGroup 1.3.6.1.4.1.6527.3.1.1.43.2.6
The group of notifications supporting management of the MSDP operations on Alcatel 7x50 SR series systems.
Status: current Access: read-only
NOTIFICATION-GROUP    

tmnxMsdpSrcActiveRejGroup 1.3.6.1.4.1.6527.3.1.1.43.2.7
A collection of objects supporting management of MSDP rejected source active information on Alcatel 7x50 SR series systems.
Status: current Access: read-only
OBJECT-GROUP    

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor