RAY3-MIB
File:
RAY3-MIB.mib (22874 bytes)
Imported modules
Imported symbols
Defined Types
Tenths |
|
Numeric 32-bit type with 0.1 precision without subtyping. |
TEXTUAL-CONVENTION |
|
|
|
|
Integer32 |
|
|
Hundredths |
|
Numeric 32-bit type with 0.01 precision without subtyping. |
TEXTUAL-CONVENTION |
|
|
|
|
Integer32 |
|
|
Thousandths |
|
Numeric 32-bit type with 0.001 precision without subtyping. |
TEXTUAL-CONVENTION |
|
|
|
|
Integer32 |
|
|
DisplayStringRaw |
|
Unlimited display string - UTF8 encoding. |
TEXTUAL-CONVENTION |
|
|
|
|
OCTET STRING |
|
|
PhysAddressRaw |
|
Unlimited physic address - hexadecimal encoding for each octet. |
TEXTUAL-CONVENTION |
|
|
|
|
OCTET STRING |
|
|
ServiceState |
|
System service or device state. |
TEXTUAL-CONVENTION |
|
|
|
|
INTEGER |
na(0), up(1), down(2) |
|
AlarmState |
|
Alarm status. |
TEXTUAL-CONVENTION |
|
|
|
|
INTEGER |
na(0), up(1), down(2), ack(3) |
|
OptionSetting |
|
Setting of some options. |
TEXTUAL-CONVENTION |
|
|
|
|
INTEGER |
na(0), on(1), off(2) |
|
ModulationList |
|
Radio channel modulations numerical list |
TEXTUAL-CONVENTION |
|
|
|
|
INTEGER |
na(0), qpskS(1), qpsk(2), qam16(3), qam32(4), qam64(5), qam128(6), qam256(7), qam512(8), qam1024(9), qam2048(10), qam4096(11) |
|
IfEthEntry |
|
SEQUENCE |
|
|
|
|
speed |
Integer32 |
|
|
duplex |
INTEGER |
|
|
mdix |
INTEGER |
|
|
autonego |
OptionSetting |
|
|
flowControl |
INTEGER |
|
Defined Values
racom |
1.3.6.1.4.1.33555 |
The MIB module defines management objects for RAy product series. Revision 201909200000Z. |
MODULE-IDENTITY |
|
|
|
ray3 |
1.3.6.1.4.1.33555.4 |
OBJECT IDENTIFIER |
|
|
|
station |
1.3.6.1.4.1.33555.4.1 |
OBJECT IDENTIFIER |
|
|
|
interface |
1.3.6.1.4.1.33555.4.2 |
OBJECT IDENTIFIER |
|
|
|
statistic |
1.3.6.1.4.1.33555.4.3 |
OBJECT IDENTIFIER |
|
|
|
switch |
1.3.6.1.4.1.33555.4.4 |
OBJECT IDENTIFIER |
|
|
|
ray3Traps |
1.3.6.1.4.1.33555.4.12 |
OBJECT IDENTIFIER |
|
|
|
product |
1.3.6.1.4.1.33555.4.1.1 |
OBJECT IDENTIFIER |
|
|
|
info |
1.3.6.1.4.1.33555.4.1.2 |
OBJECT IDENTIFIER |
|
|
|
status |
1.3.6.1.4.1.33555.4.1.3 |
OBJECT IDENTIFIER |
|
|
|
chassis |
1.3.6.1.4.1.33555.4.1.4 |
OBJECT IDENTIFIER |
|
|
|
system |
1.3.6.1.4.1.33555.4.1.5 |
OBJECT IDENTIFIER |
|
|
|
access |
1.3.6.1.4.1.33555.4.1.6 |
OBJECT IDENTIFIER |
|
|
|
alarm |
1.3.6.1.4.1.33555.4.1.8 |
OBJECT IDENTIFIER |
|
|
|
serialNumber |
1.3.6.1.4.1.33555.4.1.1.2 |
Product serial number. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Gauge32 |
|
|
unitType |
1.3.6.1.4.1.33555.4.1.1.3 |
Station type (L or H). |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayStringRaw |
Size(0..4) |
|
swVer |
1.3.6.1.4.1.33555.4.1.2.2 |
Firmware version. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayStringRaw |
Size(0..16) |
|
swVerRadio |
1.3.6.1.4.1.33555.4.1.2.3 |
Radio firmware version. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayStringRaw |
Size(0..16) |
|
systemStatus |
1.3.6.1.4.1.33555.4.1.3.1 |
Unit status. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
na(0), ok(1), warning(2), alarm(3) |
|
peerNumber |
1.3.6.1.4.1.33555.4.1.3.3 |
Peer station serial number. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Gauge32 |
|
|
lineStatusII |
1.3.6.1.4.1.33555.4.1.3.8 |
Radio link status. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
na(0), setup(1), single(2), connecting(3), authorizing(4), ok(5), analyzer(6) |
|
eth1Link |
1.3.6.1.4.1.33555.4.1.3.9 |
Ethernet 1 link status. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
ServiceState |
|
|
eth2Link |
1.3.6.1.4.1.33555.4.1.3.10 |
Ethernet 2 link status. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
ServiceState |
|
|
temperatureModem |
1.3.6.1.4.1.33555.4.1.4.1 |
Modem temperature in hundredths of Celsius. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Hundredths |
-10000..10000 |
|
temperatureRadio |
1.3.6.1.4.1.33555.4.1.4.2 |
Radio temperature in hundredths of Celsius. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Hundredths |
-10000..10000 |
|
voltageUnit |
1.3.6.1.4.1.33555.4.1.4.3 |
Power supply voltage in tenths of Volts (V). |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Tenths |
0..1000 |
|
voltageSource |
1.3.6.1.4.1.33555.4.1.4.4 |
Source of supply voltage. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
na(0), aux(1), poe(2) |
|
useCpu |
1.3.6.1.4.1.33555.4.1.5.1 |
System use CPU in %. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
useMemory |
1.3.6.1.4.1.33555.4.1.5.2 |
System use memory in %. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
useLogStorage |
1.3.6.1.4.1.33555.4.1.5.3 |
Use storage for log in %. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
sshd |
1.3.6.1.4.1.33555.4.1.6.1 |
Management interface: SSH. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
on(1), onlykey(2), off(3) |
|
telnetd |
1.3.6.1.4.1.33555.4.1.6.2 |
Management interface: Telnet. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OptionSetting |
|
|
httpd |
1.3.6.1.4.1.33555.4.1.6.3 |
Management interface: HTTP. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OptionSetting |
|
|
ip |
1.3.6.1.4.1.33555.4.1.6.4 |
Management interface: IP address. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
mac |
1.3.6.1.4.1.33555.4.1.6.5 |
Management interface: MAC address. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
PhysAddressRaw |
|
|
managementVlan |
1.3.6.1.4.1.33555.4.1.6.6 |
Management interface: VLAN on/off. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OptionSetting |
|
|
managementVlanId |
1.3.6.1.4.1.33555.4.1.6.7 |
Management interface: VLAN ID. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
wifiHAP |
1.3.6.1.4.1.33555.4.1.6.8 |
Management interface: WiFi Host Access Point. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
na(0), disabled(1), enabled-on-air-link-loss(2), force-enabled(3) |
|
alarmBer |
1.3.6.1.4.1.33555.4.1.8.6 |
BER alarm state. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
AlarmState |
|
|
alarmEth1Down |
1.3.6.1.4.1.33555.4.1.8.8 |
Ethernet 1 Link Down alarm state. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
AlarmState |
|
|
alarmEth2Down |
1.3.6.1.4.1.33555.4.1.8.9 |
Ethernet 2 Link Down alarm state. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
AlarmState |
|
|
alarmNetBitrate |
1.3.6.1.4.1.33555.4.1.8.11 |
Air Speed below Limit alarm state. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
AlarmState |
|
|
alarmWifiOn |
1.3.6.1.4.1.33555.4.1.8.12 |
WiFi Host Access Point on. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
AlarmState |
|
|
alarmMse |
1.3.6.1.4.1.33555.4.1.8.13 |
MSE alarm state. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
AlarmState |
|
|
ifRadio |
1.3.6.1.4.1.33555.4.2.1 |
OBJECT IDENTIFIER |
|
|
|
ifEth |
1.3.6.1.4.1.33555.4.2.2 |
OBJECT IDENTIFIER |
|
|
|
rxChannel |
1.3.6.1.4.1.33555.4.2.1.1 |
Receiver channel ID. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayStringRaw |
Size(0..8) |
|
txChannel |
1.3.6.1.4.1.33555.4.2.1.2 |
Transceiver channel ID. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayStringRaw |
Size(0..8) |
|
rxFreq |
1.3.6.1.4.1.33555.4.2.1.3 |
Receiver frequency in kHz. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Gauge32 |
|
|
txFreq |
1.3.6.1.4.1.33555.4.2.1.4 |
Transceiver frequency in kHz. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Gauge32 |
|
|
matching |
1.3.6.1.4.1.33555.4.2.1.11 |
Channel matching. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OptionSetting |
|
|
netBitrate |
1.3.6.1.4.1.33555.4.2.1.13 |
Current net bitrate in kbps. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
maxNetBitrate |
1.3.6.1.4.1.33555.4.2.1.14 |
Maximum net bitrate in Mbps. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
txBandwidthKHz |
1.3.6.1.4.1.33555.4.2.1.15 |
Radio Tx channel bandwidth in kHz. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
channelArrangement |
1.3.6.1.4.1.33555.4.2.1.16 |
Channel arrangement. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
na(0), accp(1), acap(2), ccdp(3) |
|
rfPowerCurrent |
1.3.6.1.4.1.33555.4.2.1.17 |
Current RF Power in dBm. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
acm |
1.3.6.1.4.1.33555.4.2.1.18 |
ACM option. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OptionSetting |
|
|
atpc |
1.3.6.1.4.1.33555.4.2.1.19 |
ATPC option. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OptionSetting |
|
|
rxBandwidthKHz |
1.3.6.1.4.1.33555.4.2.1.21 |
Radio Rx channel bandwidth in kHz. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
ifEthTable |
1.3.6.1.4.1.33555.4.2.2.1 |
List of Ethernet interfaces. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
IfEthEntry |
|
ifEthEntry |
1.3.6.1.4.1.33555.4.2.2.1.1 |
Ethernet interface entry. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
IfEthEntry |
|
|
speed |
1.3.6.1.4.1.33555.4.2.2.1.1.1 |
Ethernet speed. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
1..1000000000 |
|
duplex |
1.3.6.1.4.1.33555.4.2.2.1.1.2 |
Ethernet duplex. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
na(0), full(1), half(2) |
|
mdix |
1.3.6.1.4.1.33555.4.2.2.1.1.3 |
Ethernet MDI-X / MDI. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
na(0), mdi(1), mdi-x(2) |
|
autonego |
1.3.6.1.4.1.33555.4.2.2.1.1.4 |
Ethernet autonego. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OptionSetting |
|
|
flowControl |
1.3.6.1.4.1.33555.4.2.2.1.1.7 |
Ethernet flow control. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
na(0), off(1), on(2), auto(3) |
|
radio |
1.3.6.1.4.1.33555.4.3.2 |
OBJECT IDENTIFIER |
|
|
|
ethernet |
1.3.6.1.4.1.33555.4.3.3 |
OBJECT IDENTIFIER |
|
|
|
timeAllConnect |
1.3.6.1.4.1.33555.4.3.2.5 |
Overall link uptime. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
TimeTicks |
|
|
timeMaxDisconnect |
1.3.6.1.4.1.33555.4.3.2.7 |
The longest drop (disconnecting). |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
TimeTicks |
|
|
numDisconnect |
1.3.6.1.4.1.33555.4.3.2.8 |
Number of drops (disconnecting). |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
reliability |
1.3.6.1.4.1.33555.4.3.2.9 |
Reliability in thousandths of %. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Thousandths |
0..100000 |
|
linkUptime |
1.3.6.1.4.1.33555.4.3.2.10 |
Current radio link uptime. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
TimeTicks |
|
|
ber |
1.3.6.1.4.1.33555.4.3.2.11 |
Bit Error Rate (BER) multiplied by 10^9. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
mse |
1.3.6.1.4.1.33555.4.3.2.12 |
Receiving MSE indicator in thnths of dB. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Tenths |
-500..0 |
|
ethInThroughput |
1.3.6.1.4.1.33555.4.3.3.1 |
Input Ethernet 1 data port throughput in kbps. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
ethOutThroughput |
1.3.6.1.4.1.33555.4.3.3.2 |
Output Ethernet 1 data port throughput in kbps. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
eth2InThroughput |
1.3.6.1.4.1.33555.4.3.3.3 |
Input Ethernet 2 data port throughput in kbps. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
eth2OutThroughput |
1.3.6.1.4.1.33555.4.3.3.4 |
Output Ethernet 2 data port throughput in kbps. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
speedGuard |
1.3.6.1.4.1.33555.4.4.3.2 |
Speed guard feature on/off. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OptionSetting |
|
|
tr3TemperatureAlarm |
1.3.6.1.4.1.33555.4.12.0.1 |
Temperature exceeded the threshold. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
tr3VoltageLowAlarm |
1.3.6.1.4.1.33555.4.12.0.2 |
Supply voltage below minimal threshold. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
tr3VoltageHighAlarm |
1.3.6.1.4.1.33555.4.12.0.3 |
Supply voltage above maximal threshold. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
tr3MseAlarm |
1.3.6.1.4.1.33555.4.12.0.5 |
MSE exceeded the threshold. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
tr3BerAlarm |
1.3.6.1.4.1.33555.4.12.0.6 |
BER exceeded the threshold. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
tr3AirDisconnect |
1.3.6.1.4.1.33555.4.12.0.7 |
Air line disconnected. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
tr3AirConnect |
1.3.6.1.4.1.33555.4.12.0.8 |
Air line connected after being disconnected. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
tr3Eth1LinkDown |
1.3.6.1.4.1.33555.4.12.0.9 |
Local station Ethernet 1 link Up/Down. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
tr3Eth21LinkDown |
1.3.6.1.4.1.33555.4.12.0.10 |
Local station Ethernet 2 link Up/Down. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
tr3NetBitrate |
1.3.6.1.4.1.33555.4.12.0.11 |
Air speed below threshold. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
tr3WifiOn |
1.3.6.1.4.1.33555.4.12.0.12 |
WiFi Host Access Point is on. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
tr3EventAirCapacity |
1.3.6.1.4.1.33555.4.12.0.101 |
Air channel capacity changed. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|