Nortel-Magellan-Passport-SourceRouteEndStationMIB

File: Nortel-Magellan-Passport-SourceRouteEndStationMIB.mib (22074 bytes)

Imported modules

RFC-1212 Nortel-Magellan-Passport-UsefulDefinitionsMIB Nortel-Magellan-Passport-StandardTextualConventionsMIB
Nortel-Magellan-Passport-TextualConventionsMIB Nortel-Magellan-Passport-VirtualRouterMIB

Imported symbols

OBJECT-TYPE passportMIBs Counter32
DisplayString StorageType RowStatus
Gauge32 Unsigned32 AsciiString
DashedHexString NonReplicated HexString
AsciiStringIndex vrIndex vr

Defined Types

VrSresRowStatusEntry  
SEQUENCE    
  vrSresRowStatus RowStatus
  vrSresComponentName DisplayString
  vrSresStorageType StorageType
  vrSresIndex NonReplicated

VrSresAdminControlEntry  
SEQUENCE    
  vrSresSnmpAdminStatus INTEGER

VrSresProvEntry  
SEQUENCE    
  vrSresRouteTableNumEntries Unsigned32
  vrSresAgingTime Unsigned32
  vrSresRouteDescriptorLength Unsigned32

VrSresOperStatusEntry  
SEQUENCE    
  vrSresSnmpOperStatus INTEGER

VrSresStateEntry  
SEQUENCE    
  vrSresAdminState INTEGER
  vrSresOperationalState INTEGER
  vrSresUsageState INTEGER

VrSresOperEntry  
SEQUENCE    
  vrSresRtEntriesUsed Gauge32
  vrSresRtEntriesFree Gauge32
  vrSresRtEntriesDenied Counter32

VrSresReRowStatusEntry  
SEQUENCE    
  vrSresReRowStatus RowStatus
  vrSresReComponentName DisplayString
  vrSresReStorageType StorageType
  vrSresReDestMacAddressIndex DashedHexString
  vrSresReProtocolPortNameIndex AsciiStringIndex

VrSresReOperEntry  
SEQUENCE    
  vrSresReRouteControl HexString
  vrSresReRifLength Unsigned32
  vrSresReRdDirection INTEGER
  vrSresReRouteDescr AsciiString

Defined Values

sourceRouteEndStationMIB 1.3.6.1.4.1.562.2.4.2.54
OBJECT IDENTIFIER    

vrSres 1.3.6.1.4.1.562.2.4.1.100.13
OBJECT IDENTIFIER    

vrSresRowStatusTable 1.3.6.1.4.1.562.2.4.1.100.13.1
This entry controls the addition and deletion of vrSres components.
OBJECT-TYPE    
  SEQUENCE OF  
    VrSresRowStatusEntry

vrSresRowStatusEntry 1.3.6.1.4.1.562.2.4.1.100.13.1.1
A single entry in the table represents a single vrSres component.
OBJECT-TYPE    
  VrSresRowStatusEntry  

vrSresRowStatus 1.3.6.1.4.1.562.2.4.1.100.13.1.1.1
This variable is used as the basis for SNMP naming of vrSres components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

vrSresComponentName 1.3.6.1.4.1.562.2.4.1.100.13.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

vrSresStorageType 1.3.6.1.4.1.562.2.4.1.100.13.1.1.4
This variable represents the storage type value for the vrSres tables.
OBJECT-TYPE    
  StorageType  

vrSresIndex 1.3.6.1.4.1.562.2.4.1.100.13.1.1.10
This variable represents the index for the vrSres tables.
OBJECT-TYPE    
  NonReplicated  

vrSresAdminControlTable 1.3.6.1.4.1.562.2.4.1.100.13.10
This group includes the Administrative Control attribute. This attribute defines the current administrative state of this component.
OBJECT-TYPE    
  SEQUENCE OF  
    VrSresAdminControlEntry

vrSresAdminControlEntry 1.3.6.1.4.1.562.2.4.1.100.13.10.1
An entry in the vrSresAdminControlTable.
OBJECT-TYPE    
  VrSresAdminControlEntry  

vrSresSnmpAdminStatus 1.3.6.1.4.1.562.2.4.1.100.13.10.1.1
This attribute is used to set the desired state of the interface. The up state indicates the interface is operational and packet forwarding is allowed. The down state indicates the interface is not operational and packet forwarding is unavailable. The testing state indicates that no operational packets can be passed. Changing this attribute from its default value of up is not allowed at this time.
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

vrSresProvTable 1.3.6.1.4.1.562.2.4.1.100.13.11
This group contains the provisioned attributes for the SourceRouteEndStation component.
OBJECT-TYPE    
  SEQUENCE OF  
    VrSresProvEntry

vrSresProvEntry 1.3.6.1.4.1.562.2.4.1.100.13.11.1
An entry in the vrSresProvTable.
OBJECT-TYPE    
  VrSresProvEntry  

vrSresRouteTableNumEntries 1.3.6.1.4.1.562.2.4.1.100.13.11.1.1
This attribute identifies the maximum number of entries in the SourceRouteEndStation routing table. Before you change it, check the network configuration to see how many protocol ports, such as IpPort or IpxPort, under Vr Pp have endStationSupport set to enable. The value of routeTableNumEntries also depends on the VirtualRouter attribute sresMaxHeapSpace. Consider the following attributes of the SourceRouteEndStation component when adjusting this number: - rtEntriesUsed - rtEntriesFree - rtEntriesDenied
OBJECT-TYPE    
  Unsigned32 0..65535  

vrSresAgingTime 1.3.6.1.4.1.562.2.4.1.100.13.11.1.2
This attribute specifies the time period used in seconds, to age out learned entries in the routing table.
OBJECT-TYPE    
  Unsigned32 200..1000000  

vrSresRouteDescriptorLength 1.3.6.1.4.1.562.2.4.1.100.13.11.1.3
This attribute indicates the maximum number of route descriptors supported by this implementation. The maximum number of hops will be one less because one route descriptor is always required for the destination. This attribute affects the amount of memory used by the route entry table. The larger this attribute is, the more memory the route entry table will use.
OBJECT-TYPE    
  Unsigned32 8..14  

vrSresOperStatusTable 1.3.6.1.4.1.562.2.4.1.100.13.12
This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
OBJECT-TYPE    
  SEQUENCE OF  
    VrSresOperStatusEntry

vrSresOperStatusEntry 1.3.6.1.4.1.562.2.4.1.100.13.12.1
An entry in the vrSresOperStatusTable.
OBJECT-TYPE    
  VrSresOperStatusEntry  

vrSresSnmpOperStatus 1.3.6.1.4.1.562.2.4.1.100.13.12.1.1
The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

vrSresStateTable 1.3.6.1.4.1.562.2.4.1.100.13.13
This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
OBJECT-TYPE    
  SEQUENCE OF  
    VrSresStateEntry

vrSresStateEntry 1.3.6.1.4.1.562.2.4.1.100.13.13.1
An entry in the vrSresStateTable.
OBJECT-TYPE    
  VrSresStateEntry  

vrSresAdminState 1.3.6.1.4.1.562.2.4.1.100.13.13.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

vrSresOperationalState 1.3.6.1.4.1.562.2.4.1.100.13.13.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

vrSresUsageState 1.3.6.1.4.1.562.2.4.1.100.13.13.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

vrSresOperTable 1.3.6.1.4.1.562.2.4.1.100.13.14
This group contains the operational attributes for the SourceRouteEndStation component.
OBJECT-TYPE    
  SEQUENCE OF  
    VrSresOperEntry

vrSresOperEntry 1.3.6.1.4.1.562.2.4.1.100.13.14.1
An entry in the vrSresOperTable.
OBJECT-TYPE    
  VrSresOperEntry  

vrSresRtEntriesUsed 1.3.6.1.4.1.562.2.4.1.100.13.14.1.1
This attribute specifies the total number of SourceRouteEndStation routing table entries. The value is limited by the attribute routeTableNumEntries, which is a provisionable attribute. If the value is consistently approaching the value of routeTableNumEntries, it is advisable to increase the value provisioned for routeTableNumEntries. It indicates a potential shortage of routing table entries in the future.
OBJECT-TYPE    
  Gauge32 0..65535  

vrSresRtEntriesFree 1.3.6.1.4.1.562.2.4.1.100.13.14.1.2
This attribute is indicative of the number of Sres routing table entries free. A consistently high value for this attribute indicates that there is a resource surplus here, in terms of the memory requirements of the routing table. This surplus could be utilized elsewhere if need be. The value of this attribute is directly influenced by the value of the attribute routeTableNumEntries.
OBJECT-TYPE    
  Gauge32 0..65535  

vrSresRtEntriesDenied 1.3.6.1.4.1.562.2.4.1.100.13.14.1.3
This attribute counts the number of times a SourceRouteEndStation routing table entry was unavailable. Each count indicates an instance of a new route which could not be learned because of a lack of routing table entries. A rapid increase indicates a shortage of routing table entries. To rectify this, increase the number of routing table entries through the provisioned attribute routeTableNumEntries under the SourceRouteEndStation component. This counter wraps around its maximum value of 4294967295.
OBJECT-TYPE    
  Counter32  

vrSresRe 1.3.6.1.4.1.562.2.4.1.100.13.2
OBJECT IDENTIFIER    

vrSresReRowStatusTable 1.3.6.1.4.1.562.2.4.1.100.13.2.1
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of vrSresRe components.
OBJECT-TYPE    
  SEQUENCE OF  
    VrSresReRowStatusEntry

vrSresReRowStatusEntry 1.3.6.1.4.1.562.2.4.1.100.13.2.1.1
A single entry in the table represents a single vrSresRe component.
OBJECT-TYPE    
  VrSresReRowStatusEntry  

vrSresReRowStatus 1.3.6.1.4.1.562.2.4.1.100.13.2.1.1.1
This variable is used as the basis for SNMP naming of vrSresRe components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

vrSresReComponentName 1.3.6.1.4.1.562.2.4.1.100.13.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

vrSresReStorageType 1.3.6.1.4.1.562.2.4.1.100.13.2.1.1.4
This variable represents the storage type value for the vrSresRe tables.
OBJECT-TYPE    
  StorageType  

vrSresReDestMacAddressIndex 1.3.6.1.4.1.562.2.4.1.100.13.2.1.1.10
This variable represents an index for the vrSresRe tables.
OBJECT-TYPE    
  DashedHexString Size(6)  

vrSresReProtocolPortNameIndex 1.3.6.1.4.1.562.2.4.1.100.13.2.1.1.11
This variable represents an index for the vrSresRe tables.
OBJECT-TYPE    
  AsciiStringIndex Size(1..20)  

vrSresReOperTable 1.3.6.1.4.1.562.2.4.1.100.13.2.10
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group contains information relating to a source routing destination address.
OBJECT-TYPE    
  SEQUENCE OF  
    VrSresReOperEntry

vrSresReOperEntry 1.3.6.1.4.1.562.2.4.1.100.13.2.10.1
An entry in the vrSresReOperTable.
OBJECT-TYPE    
  VrSresReOperEntry  

vrSresReRouteControl 1.3.6.1.4.1.562.2.4.1.100.13.2.10.1.1
This is the value of the routing control field for this route.
OBJECT-TYPE    
  HexString Size(2)  

vrSresReRifLength 1.3.6.1.4.1.562.2.4.1.100.13.2.10.1.2
This attribute is used to display the length of the routing information field in the routing control field.
OBJECT-TYPE    
  Unsigned32 2..30  

vrSresReRdDirection 1.3.6.1.4.1.562.2.4.1.100.13.2.10.1.3
This attribute indicates the direction to use routing descriptors (RDs). If set to leftToRight the routing descriptors, displayed in routeDescr, will be interpreted from left to right. If set to rightToLeft they will be interpreted from right to left. If rifLength is zero, this attribute will be set to noRif to indicate that there are no routing descriptors to be read.
OBJECT-TYPE    
  INTEGER leftToRight(0), rightToLeft(1), noRif(2)  

vrSresReRouteDescr 1.3.6.1.4.1.562.2.4.1.100.13.2.10.1.4
This is the embedded sequence of bridge and ring IDs for this route. For destinations on the local ring, the value of this attribute is the zero- length string. Refer to rdDirection for the direction in which to read the route descriptors. The format of the hexadecimal data displayed is as follows: 12 bit Ring Number - 4 bit Bridge Number... XXX-X XXX-X XXX-X...
OBJECT-TYPE    
  AsciiString Size(0..90)  

sourceRouteEndStationGroup 1.3.6.1.4.1.562.2.4.2.54.1
OBJECT IDENTIFIER    

sourceRouteEndStationGroupBD 1.3.6.1.4.1.562.2.4.2.54.1.4
OBJECT IDENTIFIER    

sourceRouteEndStationGroupBD01 1.3.6.1.4.1.562.2.4.2.54.1.4.2
OBJECT IDENTIFIER    

sourceRouteEndStationGroupBD01A 1.3.6.1.4.1.562.2.4.2.54.1.4.2.2
OBJECT IDENTIFIER    

sourceRouteEndStationCapabilities 1.3.6.1.4.1.562.2.4.2.54.3
OBJECT IDENTIFIER    

sourceRouteEndStationCapabilitiesBD 1.3.6.1.4.1.562.2.4.2.54.3.4
OBJECT IDENTIFIER    

sourceRouteEndStationCapabilitiesBD01 1.3.6.1.4.1.562.2.4.2.54.3.4.2
OBJECT IDENTIFIER    

sourceRouteEndStationCapabilitiesBD01A 1.3.6.1.4.1.562.2.4.2.54.3.4.2.2
OBJECT IDENTIFIER