Nortel-Magellan-Passport-VirtualRouterMIB

File: Nortel-Magellan-Passport-VirtualRouterMIB.mib (56429 bytes)

Imported modules

RFC-1212 Nortel-Magellan-Passport-UsefulDefinitionsMIB Nortel-Magellan-Passport-StandardTextualConventionsMIB
Nortel-Magellan-Passport-TextualConventionsMIB

Imported symbols

OBJECT-TYPE components passportMIBs
Counter32 RowPointer DisplayString
StorageType RowStatus InterfaceIndex
Gauge32 Integer32 Unsigned32
AsciiString NonReplicated HexString
Link AsciiStringIndex IntegerSequence

Defined Types

VrRowStatusEntry  
SEQUENCE    
  vrRowStatus RowStatus
  vrComponentName DisplayString
  vrStorageType StorageType
  vrIndex AsciiStringIndex

VrAdminContorlEntry  
SEQUENCE    
  vrSnmpAdminStatus INTEGER
  vrManagementAccess INTEGER
  vrVirtualPrivateIntranetIdentifier INTEGER

VrCidDataEntry  
SEQUENCE    
  vrCustomerIdentifier Unsigned32

VrOperStatusEntry  
SEQUENCE    
  vrSnmpOperStatus INTEGER

VrStateEntry  
SEQUENCE    
  vrAdminState INTEGER
  vrOperationalState INTEGER
  vrUsageState INTEGER

VrIfNumberOperEntry  
SEQUENCE    
  vrIfNumber Unsigned32

VrMmRowStatusEntry  
SEQUENCE    
  vrMmRowStatus RowStatus
  vrMmComponentName DisplayString
  vrMmStorageType StorageType
  vrMmIndex NonReplicated

VrMmProvEntry  
SEQUENCE    
  vrMmVrMaxHeapSpace Unsigned32
  vrMmIpMaxHeapSpace Unsigned32
  vrMmIpxMaxHeapSpace Unsigned32
  vrMmBridgingMaxHeapSpace Unsigned32
  vrMmNetSentryMaxHeapSpace Unsigned32
  vrMmSresMaxHeapSpace Unsigned32
  vrMmSnaMaxHeapSpace Unsigned32

VrMmOperEntry  
SEQUENCE    
  vrMmVrHeapSpaceBytesAllocated Unsigned32
  vrMmVrHeapSpaceAllocated Unsigned32
  vrMmIpHeapSpaceAllocated Unsigned32
  vrMmIpxHeapSpaceAllocated Unsigned32
  vrMmBridgingHeapSpaceAllocated Unsigned32
  vrMmNetSentryHeapSpaceAllocated Unsigned32
  vrMmSresHeapSpaceAllocated Unsigned32
  vrMmSnaHeapSpaceAllocated Unsigned32

VrPpRowStatusEntry  
SEQUENCE    
  vrPpRowStatus RowStatus
  vrPpComponentName DisplayString
  vrPpStorageType StorageType
  vrPpIndex AsciiStringIndex

VrPpAdminControlEntry  
SEQUENCE    
  vrPpSnmpAdminStatus INTEGER

VrPpProvEntry  
SEQUENCE    
  vrPpLinkToMedia Link

VrPpOperStatusEntry  
SEQUENCE    
  vrPpSnmpOperStatus INTEGER

VrPpStateEntry  
SEQUENCE    
  vrPpAdminState INTEGER
  vrPpOperationalState INTEGER
  vrPpUsageState INTEGER

VrPpOperEntry  
SEQUENCE    
  vrPpIfIndex InterfaceIndex

VrPpNbmaAddressEntry  
SEQUENCE    
  vrPpAtmAddress HexString

VrIfTableEntryRowStatusEntry  
SEQUENCE    
  vrIfTableEntryRowStatus RowStatus
  vrIfTableEntryComponentName DisplayString
  vrIfTableEntryStorageType StorageType
  vrIfTableEntryIndex Integer32

VrIfTableEntryIftEntry  
SEQUENCE    
  vrIfTableEntryIfAdminStatus INTEGER
  vrIfTableEntryIfOperStatus INTEGER
  vrIfTableEntryIfLastChange Unsigned32
  vrIfTableEntryIfInOctets Counter32
  vrIfTableEntryIfOutOctets Counter32
  vrIfTableEntryIfInDiscards Counter32
  vrIfTableEntryIfOutDiscards Counter32
  vrIfTableEntryIfInErrors Counter32
  vrIfTableEntryIfOutErrors Counter32
  vrIfTableEntryIfInUcastPkts Counter32
  vrIfTableEntryIfOutUcastPkts Counter32
  vrIfTableEntryIfInNuCastPkts Counter32
  vrIfTableEntryIfOutNuCastPkts Counter32
  vrIfTableEntryIfInUnknownProtos Counter32
  vrIfTableEntryIfOutQlength Gauge32
  vrIfTableEntryIfDescription AsciiString
  vrIfTableEntryIfType INTEGER
  vrIfTableEntryIfMtu Unsigned32
  vrIfTableEntryIfSpeed Unsigned32
  vrIfTableEntryIfPhysicalAddress AsciiString
  vrIfTableEntryIfSpecific IntegerSequence

VrIfTableEntryAdditionalInfoEntry  
SEQUENCE    
  vrIfTableEntryStdComponentName RowPointer

VrQosPRowStatusEntry  
SEQUENCE    
  vrQosPRowStatus RowStatus
  vrQosPComponentName DisplayString
  vrQosPStorageType StorageType
  vrQosPIndex Integer32

VrQosPProvEntry  
SEQUENCE    
  vrQosPVnsDiscardPriority Unsigned32
  vrQosPVnsEmissionPriority Unsigned32
  vrQosPWanEmissionPriority Unsigned32

Defined Values

virtualRouterMIB 1.3.6.1.4.1.562.2.4.2.26
OBJECT IDENTIFIER    

vr 1.3.6.1.4.1.562.2.4.1.100
OBJECT IDENTIFIER    

vrRowStatusTable 1.3.6.1.4.1.562.2.4.1.100.1
This entry controls the addition and deletion of vr components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrRowStatusEntry

vrRowStatusEntry 1.3.6.1.4.1.562.2.4.1.100.1.1
A single entry in the table represents a single vr component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrRowStatusEntry  

vrRowStatus 1.3.6.1.4.1.562.2.4.1.100.1.1.1
This variable is used as the basis for SNMP naming of vr components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

vrComponentName 1.3.6.1.4.1.562.2.4.1.100.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

vrStorageType 1.3.6.1.4.1.562.2.4.1.100.1.1.4
This variable represents the storage type value for the vr tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

vrIndex 1.3.6.1.4.1.562.2.4.1.100.1.1.10
This variable represents the index for the vr tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AsciiStringIndex Size(1..8)  

vrAdminContorlTable 1.3.6.1.4.1.562.2.4.1.100.100
This group includes the Administrative Control attribute. This attribute defines the current administrative state of this component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrAdminContorlEntry

vrAdminContorlEntry 1.3.6.1.4.1.562.2.4.1.100.100.1
An entry in the vrAdminContorlTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrAdminContorlEntry  

vrSnmpAdminStatus 1.3.6.1.4.1.562.2.4.1.100.100.1.1
This sets the desired state of this VirtualRouter. The up state indicates the Vr is operational. The down state indicates the Vr is not operational. The down state is only valid when the managementAccess attribute is disabled. Testing is an invalid state for the Vr.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

vrManagementAccess 1.3.6.1.4.1.562.2.4.1.100.100.1.2
This attributes defines the routing capabilities of this Virtual Router and controls the tcp access into that Vr. External access is only permitted through the Vr that has this attribute enabled. The attribute allows the following subcomponents to be provisioned: Ipx, Bridging, Sna, Sres, NetSentry, and Snmp. Exactly one Vr must have this attribute enabled. The first provisioned Vr will have the attribute enabled by default. Subsequent Vrs will have the attribute disabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

vrVirtualPrivateIntranetIdentifier 1.3.6.1.4.1.562.2.4.1.100.100.1.3
Identifies the Virtual Private Intranet (VPI) associated with this Virtual Router. The vpiId must be unique for each VR on a Passport and ach interconnected VR must have the same vpiId.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..255  

vrCidDataTable 1.3.6.1.4.1.562.2.4.1.100.101
This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrCidDataEntry

vrCidDataEntry 1.3.6.1.4.1.562.2.4.1.100.101.1
An entry in the vrCidDataTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrCidDataEntry  

vrCustomerIdentifier 1.3.6.1.4.1.562.2.4.1.100.101.1.1
This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0 | 1..8191  

vrOperStatusTable 1.3.6.1.4.1.562.2.4.1.100.103
This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrOperStatusEntry

vrOperStatusEntry 1.3.6.1.4.1.562.2.4.1.100.103.1
An entry in the vrOperStatusTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrOperStatusEntry  

vrSnmpOperStatus 1.3.6.1.4.1.562.2.4.1.100.103.1.1
The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

vrStateTable 1.3.6.1.4.1.562.2.4.1.100.104
This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrStateEntry

vrStateEntry 1.3.6.1.4.1.562.2.4.1.100.104.1
An entry in the vrStateTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrStateEntry  

vrAdminState 1.3.6.1.4.1.562.2.4.1.100.104.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

vrOperationalState 1.3.6.1.4.1.562.2.4.1.100.104.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

vrUsageState 1.3.6.1.4.1.562.2.4.1.100.104.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

vrIfNumberOperTable 1.3.6.1.4.1.562.2.4.1.100.105
This group contains the ifNumber attribute.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIfNumberOperEntry

vrIfNumberOperEntry 1.3.6.1.4.1.562.2.4.1.100.105.1
An entry in the vrIfNumberOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIfNumberOperEntry  

vrIfNumber 1.3.6.1.4.1.562.2.4.1.100.105.1.1
This attribute defines the number of IfEntries in the IfTable.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..65535  

vrMm 1.3.6.1.4.1.562.2.4.1.100.2
OBJECT IDENTIFIER    

vrMmRowStatusTable 1.3.6.1.4.1.562.2.4.1.100.2.1
This entry controls the addition and deletion of vrMm components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrMmRowStatusEntry

vrMmRowStatusEntry 1.3.6.1.4.1.562.2.4.1.100.2.1.1
A single entry in the table represents a single vrMm component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrMmRowStatusEntry  

vrMmRowStatus 1.3.6.1.4.1.562.2.4.1.100.2.1.1.1
This variable is used as the basis for SNMP naming of vrMm components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

vrMmComponentName 1.3.6.1.4.1.562.2.4.1.100.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

vrMmStorageType 1.3.6.1.4.1.562.2.4.1.100.2.1.1.4
This variable represents the storage type value for the vrMm tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

vrMmIndex 1.3.6.1.4.1.562.2.4.1.100.2.1.1.10
This variable represents the index for the vrMm tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

vrMmProvTable 1.3.6.1.4.1.562.2.4.1.100.2.10
The group includes all provisioned attributes for the MemoryManagement component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrMmProvEntry

vrMmProvEntry 1.3.6.1.4.1.562.2.4.1.100.2.10.1
An entry in the vrMmProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrMmProvEntry  

vrMmVrMaxHeapSpace 1.3.6.1.4.1.562.2.4.1.100.2.10.1.1
The maximum percentage of the total system heap space that is allowed for use by this Virtual Router. Memory allocation for this VR which attempts to exceed this limit will fail causing a shut down of the requesting process.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..100  

vrMmIpMaxHeapSpace 1.3.6.1.4.1.562.2.4.1.100.2.10.1.2
The maximum percentage of this VR's dynamic memory which can be allocated to this VR's IP. An attempt to allocate memory in excess of this limit forces IP to shut down.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..100  

vrMmIpxMaxHeapSpace 1.3.6.1.4.1.562.2.4.1.100.2.10.1.3
The maximum percentage of this VR's dynamic memory which can be allocated to this VR's IPX. An attempt to allocate memory in excess of this limit forces IPX to shut down.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..100  

vrMmBridgingMaxHeapSpace 1.3.6.1.4.1.562.2.4.1.100.2.10.1.6
The maximum percentage of this VR's dynamic memory which can be allocated to this VR's Bridging. An attempt to allocate memory in excess of this limit forces Bridging to shut down.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..100  

vrMmNetSentryMaxHeapSpace 1.3.6.1.4.1.562.2.4.1.100.2.10.1.7
The maximum percentage of this VR's dynamic memory which can be allocated to this VR's NetSentry. An attempt to allocate memory in excess of this limit forces NetSentry to shut down.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..100  

vrMmSresMaxHeapSpace 1.3.6.1.4.1.562.2.4.1.100.2.10.1.8
The maximum percentage of this VR's dynamic memory which can be allocated to this VR's SourceRouteEndStation. An attempt to allocate memory in excess of this limit forces SourceRouteEndStation to shut down.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..100  

vrMmSnaMaxHeapSpace 1.3.6.1.4.1.562.2.4.1.100.2.10.1.9
The maximum percentage of this VR's dynamic memory which can be allocated to this VR's SNA. An attempt to allocate memory in excess of this limit forces SNA to shut down.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..100  

vrMmOperTable 1.3.6.1.4.1.562.2.4.1.100.2.11
The group includes all operational attributes for the MemoryManagement component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrMmOperEntry

vrMmOperEntry 1.3.6.1.4.1.562.2.4.1.100.2.11.1
An entry in the vrMmOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrMmOperEntry  

vrMmVrHeapSpaceBytesAllocated 1.3.6.1.4.1.562.2.4.1.100.2.11.1.1
The number of bytes of system dynamic memory which has been allocated by this Virtual Router.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

vrMmVrHeapSpaceAllocated 1.3.6.1.4.1.562.2.4.1.100.2.11.1.2
The percentage of system dynamic memory which is currently allocated to this Virtual Router.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..100  

vrMmIpHeapSpaceAllocated 1.3.6.1.4.1.562.2.4.1.100.2.11.1.3
The percentage of this Virtual Router's dynamic memory which is currently allocated to this Virtual Router's IP.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..100  

vrMmIpxHeapSpaceAllocated 1.3.6.1.4.1.562.2.4.1.100.2.11.1.4
The percentage of this Virtual Router's dynamic memory which is currently allocated to this Virtual Router's IPX.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..100  

vrMmBridgingHeapSpaceAllocated 1.3.6.1.4.1.562.2.4.1.100.2.11.1.7
The percentage of this Virtual Router's dynamic memory which is currently allocated to this Virtual Router's Bridging.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..100  

vrMmNetSentryHeapSpaceAllocated 1.3.6.1.4.1.562.2.4.1.100.2.11.1.8
The percentage of this Virtual Router's dynamic memory which is currently allocated to this Virtual Router's NetSentry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..100  

vrMmSresHeapSpaceAllocated 1.3.6.1.4.1.562.2.4.1.100.2.11.1.9
The percentage of this Virtual Router's dynamic memory which is currently allocated to this Virtual Router's Source Route End Station.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..100  

vrMmSnaHeapSpaceAllocated 1.3.6.1.4.1.562.2.4.1.100.2.11.1.10
The percentage of this Virtual Router's dynamic memory which is currently allocated to this Virtual Router's SNA.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..100  

vrPp 1.3.6.1.4.1.562.2.4.1.100.3
OBJECT IDENTIFIER    

vrPpRowStatusTable 1.3.6.1.4.1.562.2.4.1.100.3.1
This entry controls the addition and deletion of vrPp components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrPpRowStatusEntry

vrPpRowStatusEntry 1.3.6.1.4.1.562.2.4.1.100.3.1.1
A single entry in the table represents a single vrPp component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrPpRowStatusEntry  

vrPpRowStatus 1.3.6.1.4.1.562.2.4.1.100.3.1.1.1
This variable is used as the basis for SNMP naming of vrPp components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

vrPpComponentName 1.3.6.1.4.1.562.2.4.1.100.3.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

vrPpStorageType 1.3.6.1.4.1.562.2.4.1.100.3.1.1.4
This variable represents the storage type value for the vrPp tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

vrPpIndex 1.3.6.1.4.1.562.2.4.1.100.3.1.1.10
This variable represents the index for the vrPp tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AsciiStringIndex Size(1..20)  

vrPpAdminControlTable 1.3.6.1.4.1.562.2.4.1.100.3.100
This group includes the Administrative Control attribute. This attribute defines the current administrative state of this component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrPpAdminControlEntry

vrPpAdminControlEntry 1.3.6.1.4.1.562.2.4.1.100.3.100.1
An entry in the vrPpAdminControlTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrPpAdminControlEntry  

vrPpSnmpAdminStatus 1.3.6.1.4.1.562.2.4.1.100.3.100.1.1
The desired state of the interface. The up state indicates the interface is operational and packet forwarding is allowed. The down state indicates the interface is not operational and packet forwarding is unavailable. The testing state indicates that no operational packets can be passed.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

vrPpProvTable 1.3.6.1.4.1.562.2.4.1.100.3.101
This group includes provisioned attributes specific to the ProtocolPort component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrPpProvEntry

vrPpProvEntry 1.3.6.1.4.1.562.2.4.1.100.3.101.1
An entry in the vrPpProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrPpProvEntry  

vrPpLinkToMedia 1.3.6.1.4.1.562.2.4.1.100.3.101.1.1
This attribute defines the Media Application which this Protocol Port is using as an interface to the network.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Link  

vrPpOperStatusTable 1.3.6.1.4.1.562.2.4.1.100.3.102
This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrPpOperStatusEntry

vrPpOperStatusEntry 1.3.6.1.4.1.562.2.4.1.100.3.102.1
An entry in the vrPpOperStatusTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrPpOperStatusEntry  

vrPpSnmpOperStatus 1.3.6.1.4.1.562.2.4.1.100.3.102.1.1
The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

vrPpStateTable 1.3.6.1.4.1.562.2.4.1.100.3.103
This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrPpStateEntry

vrPpStateEntry 1.3.6.1.4.1.562.2.4.1.100.3.103.1
An entry in the vrPpStateTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrPpStateEntry  

vrPpAdminState 1.3.6.1.4.1.562.2.4.1.100.3.103.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

vrPpOperationalState 1.3.6.1.4.1.562.2.4.1.100.3.103.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

vrPpUsageState 1.3.6.1.4.1.562.2.4.1.100.3.103.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

vrPpOperTable 1.3.6.1.4.1.562.2.4.1.100.3.104
This group includes operational attributes specific to the ProtocolPort component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrPpOperEntry

vrPpOperEntry 1.3.6.1.4.1.562.2.4.1.100.3.104.1
An entry in the vrPpOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrPpOperEntry  

vrPpIfIndex 1.3.6.1.4.1.562.2.4.1.100.3.104.1.1
This represents the SNMP ifIndex which is associated with this PP. This ifIndex can be used to extract detailed information about the PP from the ifTable.
Status: mandatory Access: read-only
OBJECT-TYPE    
  InterfaceIndex 1..65535  

vrPpNbmaAddressTable 1.3.6.1.4.1.562.2.4.1.100.3.105
This group contains the operational attributes of the ProtocolPort component specific to NHRP.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrPpNbmaAddressEntry

vrPpNbmaAddressEntry 1.3.6.1.4.1.562.2.4.1.100.3.105.1
An entry in the vrPpNbmaAddressTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrPpNbmaAddressEntry  

vrPpAtmAddress 1.3.6.1.4.1.562.2.4.1.100.3.105.1.1
This attribute indicates the ATM address which is associated with this protocol port. NHRP uses this address to establish shortcut connections. This attribute is not displayed if NHRP is not provisioned on this protocol port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  HexString Size(0..20)  

vrIfTableEntry 1.3.6.1.4.1.562.2.4.1.100.10
OBJECT IDENTIFIER    

vrIfTableEntryRowStatusTable 1.3.6.1.4.1.562.2.4.1.100.10.1
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of vrIfTableEntry components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIfTableEntryRowStatusEntry

vrIfTableEntryRowStatusEntry 1.3.6.1.4.1.562.2.4.1.100.10.1.1
A single entry in the table represents a single vrIfTableEntry component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIfTableEntryRowStatusEntry  

vrIfTableEntryRowStatus 1.3.6.1.4.1.562.2.4.1.100.10.1.1.1
This variable is used as the basis for SNMP naming of vrIfTableEntry components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

vrIfTableEntryComponentName 1.3.6.1.4.1.562.2.4.1.100.10.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

vrIfTableEntryStorageType 1.3.6.1.4.1.562.2.4.1.100.10.1.1.4
This variable represents the storage type value for the vrIfTableEntry tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

vrIfTableEntryIndex 1.3.6.1.4.1.562.2.4.1.100.10.1.1.10
This variable represents the index for the vrIfTableEntry tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Integer32 1..65535  

vrIfTableEntryIftTable 1.3.6.1.4.1.562.2.4.1.100.10.10
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group represents the SNMP interface table entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIfTableEntryIftEntry

vrIfTableEntryIftEntry 1.3.6.1.4.1.562.2.4.1.100.10.10.1
An entry in the vrIfTableEntryIftTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIfTableEntryIftEntry  

vrIfTableEntryIfAdminStatus 1.3.6.1.4.1.562.2.4.1.100.10.10.1.2
The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

vrIfTableEntryIfOperStatus 1.3.6.1.4.1.562.2.4.1.100.10.10.1.3
This attribute provides the current operational status of the interface. The testing state indicates that no operational packets can be passed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

vrIfTableEntryIfLastChange 1.3.6.1.4.1.562.2.4.1.100.10.10.1.4
The value of sysUpTime at the time the interface entered its current operational state. If the current state was entered prior to the last re- initialization of the local network management subsystem, then this object contains a zero value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

vrIfTableEntryIfInOctets 1.3.6.1.4.1.562.2.4.1.100.10.10.1.5
The total number of octets received on the interface, including framing characters.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrIfTableEntryIfOutOctets 1.3.6.1.4.1.562.2.4.1.100.10.10.1.6
The total number of octets transmitted out the interface, including framing characters
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrIfTableEntryIfInDiscards 1.3.6.1.4.1.562.2.4.1.100.10.10.1.7
The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher layer protocol. One possible reason for discarding such a packet could be to free up buffer space.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrIfTableEntryIfOutDiscards 1.3.6.1.4.1.562.2.4.1.100.10.10.1.8
The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrIfTableEntryIfInErrors 1.3.6.1.4.1.562.2.4.1.100.10.10.1.9
The number of inbound packet that contained errors preventing them from being deliverable to a higher layer protocol.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrIfTableEntryIfOutErrors 1.3.6.1.4.1.562.2.4.1.100.10.10.1.10
The number of outbound packets that could not be transmitted because of errors.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrIfTableEntryIfInUcastPkts 1.3.6.1.4.1.562.2.4.1.100.10.10.1.11
The number of subnetwork-unicast packets delivered to a higher-layer protocol.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrIfTableEntryIfOutUcastPkts 1.3.6.1.4.1.562.2.4.1.100.10.10.1.12
The total number of packets that higher level protocols requested be transmitted to a subnetwork-unicast address, including those that were discarded or not sent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrIfTableEntryIfInNuCastPkts 1.3.6.1.4.1.562.2.4.1.100.10.10.1.13
The number of non-unicast (i.e., subnetwork- broadcast or subnetwork-multicast) packets delivered to a higher-layer protocol.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrIfTableEntryIfOutNuCastPkts 1.3.6.1.4.1.562.2.4.1.100.10.10.1.14
The total number of packets that higher level protocols request be transmitted to a non-unicast address, including those that were discarded or not sent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrIfTableEntryIfInUnknownProtos 1.3.6.1.4.1.562.2.4.1.100.10.10.1.15
The number of packets received via the interface which were discarded because of an unknown or unsupported protocol.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

vrIfTableEntryIfOutQlength 1.3.6.1.4.1.562.2.4.1.100.10.10.1.16
The length of the output packet queue (in packets)
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge32 0..4294967295  

vrIfTableEntryIfDescription 1.3.6.1.4.1.562.2.4.1.100.10.10.1.17
A textual string containing information about the interface. This string includes the name of the manufacturer, the product name and the version of the hardware interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  AsciiString Size(0..255)  

vrIfTableEntryIfType 1.3.6.1.4.1.562.2.4.1.100.10.10.1.18
The type of interface, distinguished according to the physical/link protocol(s) immediately below the network layer in the protocol stack
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER other(1), ddnX25(4), rfc877x25(5), ethernetCsmacd(6), ethernet8023(7), tokenBus8024(8), tokenring8025(9), man802(10), starLan(11), hyperChannel(14), fddi(15), lapb(16), sdlc(17), ds1(18), e1(19), basicIsdn(20), primaryIsdn(21), propPointToPointSerial(22), ppp(23), ds3(30), smds(31), frameRelay(32), frameRelayService(44), v35(45), hssi(46), aflane8023(59), aflane8025(60), v11(64), atmMpeVcEncap(1039), atmMpeLlcEncap(1040), ilsForwarder(1041), ipTunnel(1042), virtualMedia(1043)  

vrIfTableEntryIfMtu 1.3.6.1.4.1.562.2.4.1.100.10.10.1.19
The size of the largest datagram which can be sent/received on the interface, specified in octets. For interfaces that are used for transmitting network datagrams, this is the size of the largest network datagram that can be sent on the interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

vrIfTableEntryIfSpeed 1.3.6.1.4.1.562.2.4.1.100.10.10.1.20
An estimate of the interface's current bandwidth in bits per second. For interfaces which do not vary in bandwidth or for those where no accurate estimation can be made, this object should contain the nominal bandwidth.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

vrIfTableEntryIfPhysicalAddress 1.3.6.1.4.1.562.2.4.1.100.10.10.1.21
The interface's address at the protocol layer immediately `below' the network layer in the protocol stack. For interfaces which do not have such an address (e.g., a serial line), this object should be an octet string of zero length.
Status: mandatory Access: read-only
OBJECT-TYPE    
  AsciiString Size(0..17)  

vrIfTableEntryIfSpecific 1.3.6.1.4.1.562.2.4.1.100.10.10.1.22
A reference to MIB definitions specific to the particular media being used to realize the interface. For example, if the interface is realized by an ethernet, then the value of this object refers to a document defining objects specific to ethernet. If this information is not present, its value should be set to the OBJECT IDENTIFIER 0.0, which is a syntactically valid object identifier, and any conformant implementation of ASN.1 and BER must be able to generate and recognize this value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IntegerSequence  

vrIfTableEntryAdditionalInfoTable 1.3.6.1.4.1.562.2.4.1.100.10.11
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group contains additional information associated with this ifEntry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrIfTableEntryAdditionalInfoEntry

vrIfTableEntryAdditionalInfoEntry 1.3.6.1.4.1.562.2.4.1.100.10.11.1
An entry in the vrIfTableEntryAdditionalInfoTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrIfTableEntryAdditionalInfoEntry  

vrIfTableEntryStdComponentName 1.3.6.1.4.1.562.2.4.1.100.10.11.1.1
This attribute provides a component name associated with this ifEntry. This component is the source of the data stored in this entry. More data may be determined about this entry by looking at the component associated with this component name.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowPointer  

vrQosP 1.3.6.1.4.1.562.2.4.1.100.15
OBJECT IDENTIFIER    

vrQosPRowStatusTable 1.3.6.1.4.1.562.2.4.1.100.15.1
This entry controls the addition and deletion of vrQosP components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrQosPRowStatusEntry

vrQosPRowStatusEntry 1.3.6.1.4.1.562.2.4.1.100.15.1.1
A single entry in the table represents a single vrQosP component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrQosPRowStatusEntry  

vrQosPRowStatus 1.3.6.1.4.1.562.2.4.1.100.15.1.1.1
This variable is used as the basis for SNMP naming of vrQosP components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

vrQosPComponentName 1.3.6.1.4.1.562.2.4.1.100.15.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

vrQosPStorageType 1.3.6.1.4.1.562.2.4.1.100.15.1.1.4
This variable represents the storage type value for the vrQosP tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

vrQosPIndex 1.3.6.1.4.1.562.2.4.1.100.15.1.1.10
This variable represents the index for the vrQosP tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Integer32 0..3  

vrQosPProvTable 1.3.6.1.4.1.562.2.4.1.100.15.10
This group includes all attributes that can be provisioned to define an InwQualityofServiceProfile instance.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VrQosPProvEntry

vrQosPProvEntry 1.3.6.1.4.1.562.2.4.1.100.15.10.1
An entry in the vrQosPProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VrQosPProvEntry  

vrQosPVnsDiscardPriority 1.3.6.1.4.1.562.2.4.1.100.15.10.1.1
This attribute specifies the throughput importance of the packets when forwarded over VNS connections. In times of congestion the discard priority of a packet is used to determine whether the packet should be discarded to reduce the heavy traffic load. Packets with lower discard priority (numerically higher vdp) are more likely to be discarded than packets with higher discard priority (numerically lower vdp). Discard priority one (vdp 1) should be used for the most important traffic, whereas discard priority three (vdp 3) should be used for the least important traffic.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 1..3  

vrQosPVnsEmissionPriority 1.3.6.1.4.1.562.2.4.1.100.15.10.1.2
This attribute specifies the delay importance of the packets when forwarded over VNS connections. Packets with higher emission priority (vep 1) are transmitted before packets with lower emission priority (vep 2). Delay sensitive packets should be sent with emission priority one (vep 1).
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 1..2  

vrQosPWanEmissionPriority 1.3.6.1.4.1.562.2.4.1.100.15.10.1.3
This attribute specifies the delay importance of the packets when forwarded over WAN connections. Packets with higher emission priority (wep 1) are transmitted before packets with lower emission priority (wep 2). Delay sensitive packets should be sent with emission priority one (wep 1). This attribute has been obsoleted and is replaced by emissionPriority attribute under Vr/n Ip Pg/n CosTreatment/n component.
Status: obsolete Access: read-write
OBJECT-TYPE    
  Unsigned32 1..2  

virtualRouterGroup 1.3.6.1.4.1.562.2.4.2.26.1
OBJECT IDENTIFIER    

virtualRouterGroupBE 1.3.6.1.4.1.562.2.4.2.26.1.5
OBJECT IDENTIFIER    

virtualRouterGroupBE01 1.3.6.1.4.1.562.2.4.2.26.1.5.2
OBJECT IDENTIFIER    

virtualRouterGroupBE01A 1.3.6.1.4.1.562.2.4.2.26.1.5.2.2
OBJECT IDENTIFIER    

virtualRouterCapabilities 1.3.6.1.4.1.562.2.4.2.26.3
OBJECT IDENTIFIER    

virtualRouterCapabilitiesBE 1.3.6.1.4.1.562.2.4.2.26.3.5
OBJECT IDENTIFIER    

virtualRouterCapabilitiesBE01 1.3.6.1.4.1.562.2.4.2.26.3.5.2
OBJECT IDENTIFIER    

virtualRouterCapabilitiesBE01A 1.3.6.1.4.1.562.2.4.2.26.3.5.2.2
OBJECT IDENTIFIER