LIGO-WIRELESS-MIB

File: LIGO-WIRELESS-MIB.mib (13014 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC SNMPv2-MIB
IF-MIB LIGOWAVE-MIB

Imported symbols

MODULE-IDENTITY OBJECT-TYPE NOTIFICATION-TYPE
Counter32 Integer32 Gauge32
MacAddress TruthValue sysLocation
ifIndex ifPhysAddress ligoMgmt

Defined Types

LigoWiIfConfEntry  
SEQUENCE    
  ligoWiIfMacAddress MacAddress
  ligoWiIfProtocol OCTET STRING
  ligoWiIfMode INTEGER
  ligoWiIfESSID OCTET STRING
  ligoWiIfCountryCode OCTET STRING
  ligoWiIfFrequency Integer32
  ligoWiIfChannel Integer32
  ligoWiIfChannelBandwidth Integer32
  ligoWiIfEncryption INTEGER
  ligoWiIfTxPower Gauge32
  ligoWiIfBitRate Gauge32
  ligoWiIfLinkQuality Gauge32
  ligoWiIfMaxLinkQuality Gauge32
  ligoWiIfSignalLevel Integer32
  ligoWiIfNoiseLevel Integer32
  ligoWiIfAssocNodeCount Gauge32

LigoWiIfStatsEntry  
SEQUENCE    
  ligoWiIfRxTotal Counter32
  ligoWiIfRxErrors Counter32
  ligoWiIfTxTotal Counter32
  ligoWiIfTxRetries Counter32

LigoWiRemoteNodeStatsEntry  
SEQUENCE    
  ligoWiRmtNodeMacAddress MacAddress
  ligoWiRmtNodeAssociated TruthValue
  ligoWiRmtNodeTxBytes Counter32
  ligoWiRmtNodeRxBytes Counter32
  ligoWiRmtNodeSignalLevel Integer32
  ligoWiRmtNodeNoiseLevel Integer32

Defined Values

ligoWirelessMIB 1.3.6.1.4.1.32750.3.10
The LigoWave Wireless MIB.
MODULE-IDENTITY    

ligoWirelessMIBObjects 1.3.6.1.4.1.32750.3.10.1
OBJECT IDENTIFIER    

ligoWiNotifs 1.3.6.1.4.1.32750.3.10.1.0
OBJECT IDENTIFIER    

ligoWiInfo 1.3.6.1.4.1.32750.3.10.1.1
OBJECT IDENTIFIER    

ligoWiConf 1.3.6.1.4.1.32750.3.10.1.2
OBJECT IDENTIFIER    

ligoWiStats 1.3.6.1.4.1.32750.3.10.1.3
OBJECT IDENTIFIER    

ligoWiIfConfTable 1.3.6.1.4.1.32750.3.10.1.2.1
Wireless interface configuration table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    LigoWiIfConfEntry

ligoWiIfConfEntry 1.3.6.1.4.1.32750.3.10.1.2.1.1
Wireless interface configuration table entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  LigoWiIfConfEntry  

ligoWiIfMacAddress 1.3.6.1.4.1.32750.3.10.1.2.1.1.1
Interface MAC address.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

ligoWiIfProtocol 1.3.6.1.4.1.32750.3.10.1.2.1.1.2
Protocol string, for example 'IEEE 802.11g'.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..15)  

ligoWiIfMode 1.3.6.1.4.1.32750.3.10.1.2.1.1.3
Wireless interface operation mode.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER auto(0), adhoc(1), managed(2), master(3), repeater(4), secondary(5), monitor(6)  

ligoWiIfESSID 1.3.6.1.4.1.32750.3.10.1.2.1.1.4
ESSID.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

ligoWiIfCountryCode 1.3.6.1.4.1.32750.3.10.1.2.1.1.5
Country code.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(2..3)  

ligoWiIfFrequency 1.3.6.1.4.1.32750.3.10.1.2.1.1.6
Current operating frequency.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ligoWiIfChannel 1.3.6.1.4.1.32750.3.10.1.2.1.1.7
Channel number.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ligoWiIfChannelBandwidth 1.3.6.1.4.1.32750.3.10.1.2.1.1.8
Channel bandwidth.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ligoWiIfEncryption 1.3.6.1.4.1.32750.3.10.1.2.1.1.9
Encryption type.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unknown(0), open(1), wep64bit(2), wep128bit(3), wep(4), enterpriseWpa(5), personalWpa(6), enterpriseWpa2(7), personalWpa2(8), enterpriseWpaOrWpa2(9), personalWpaOrWpa2(10)  

ligoWiIfTxPower 1.3.6.1.4.1.32750.3.10.1.2.1.1.10
Transmit power in dBm.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

ligoWiIfBitRate 1.3.6.1.4.1.32750.3.10.1.2.1.1.11
Transmission bitrate.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

ligoWiIfLinkQuality 1.3.6.1.4.1.32750.3.10.1.2.1.1.12
Link quality value.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

ligoWiIfMaxLinkQuality 1.3.6.1.4.1.32750.3.10.1.2.1.1.13
Maximum possible link quality value for current wireless card.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

ligoWiIfSignalLevel 1.3.6.1.4.1.32750.3.10.1.2.1.1.14
Signal level.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ligoWiIfNoiseLevel 1.3.6.1.4.1.32750.3.10.1.2.1.1.15
Noise level.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ligoWiIfAssocNodeCount 1.3.6.1.4.1.32750.3.10.1.2.1.1.16
Number of associated nodes when working in access point mode. 1 - if associated to remote access point in client mode.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

ligoWiIfStatsTable 1.3.6.1.4.1.32750.3.10.1.3.1
Wireless interface statistics table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    LigoWiIfStatsEntry

ligoWiIfStatsEntry 1.3.6.1.4.1.32750.3.10.1.3.1.1
Wireless interface statistics table entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  LigoWiIfStatsEntry  

ligoWiIfRxTotal 1.3.6.1.4.1.32750.3.10.1.3.1.1.1
Number of total received packets.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ligoWiIfRxErrors 1.3.6.1.4.1.32750.3.10.1.3.1.1.2
Number of reception errors.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ligoWiIfTxTotal 1.3.6.1.4.1.32750.3.10.1.3.1.1.3
Number of total transmitted packets.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ligoWiIfTxRetries 1.3.6.1.4.1.32750.3.10.1.3.1.1.4
Number of transmission retries.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ligoWiRemoteNodeStatsTable 1.3.6.1.4.1.32750.3.10.1.3.2
Remote node statistics table. This table shows statistics for associated or already disconnected clients on wireless interfaces which are operating in access point mode. For interfaces operating in client mode and associated to remote access point information about access point is shown.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    LigoWiRemoteNodeStatsEntry

ligoWiRemoteNodeStatsEntry 1.3.6.1.4.1.32750.3.10.1.3.2.1
Wireless remote node statistics table entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  LigoWiRemoteNodeStatsEntry  

ligoWiRmtNodeMacAddress 1.3.6.1.4.1.32750.3.10.1.3.2.1.1
Remote node MAC address.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

ligoWiRmtNodeAssociated 1.3.6.1.4.1.32750.3.10.1.3.2.1.2
Remote node is currently associated.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

ligoWiRmtNodeTxBytes 1.3.6.1.4.1.32750.3.10.1.3.2.1.3
Bytes transmitted to remote node.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ligoWiRmtNodeRxBytes 1.3.6.1.4.1.32750.3.10.1.3.2.1.4
Bytes received from remote node.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ligoWiRmtNodeSignalLevel 1.3.6.1.4.1.32750.3.10.1.3.2.1.5
Signal level reported by remote node.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ligoWiRmtNodeNoiseLevel 1.3.6.1.4.1.32750.3.10.1.3.2.1.6
Noise level reported by remote node.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ligoWiFrequencyChange 1.3.6.1.4.1.32750.3.10.1.0.1
This notification is sent on frequency change.
Status: current Access: read-only
NOTIFICATION-TYPE    

ligoWiNoiseThresholdReached 1.3.6.1.4.1.32750.3.10.1.0.2
This notification is sent when noise becomes bigger than threshold.
Status: current Access: read-only
NOTIFICATION-TYPE    

ligoWiRemoteNodeConnected 1.3.6.1.4.1.32750.3.10.1.0.3
This notification is sent when remote node associates.
Status: current Access: read-only
NOTIFICATION-TYPE    

ligoWiRemoteNodeDisconnected 1.3.6.1.4.1.32750.3.10.1.0.4
This notification is sent when remote node dissasociates.
Status: current Access: read-only
NOTIFICATION-TYPE    

ligoWiLinkQualThresholdReached 1.3.6.1.4.1.32750.3.10.1.0.5
This notification is sent when link quality crosses the specified threshold.
Status: current Access: read-only
NOTIFICATION-TYPE    

ligoWiRxErrorsThreshold 1.3.6.1.4.1.32750.3.10.1.0.6
This notification is sent when percentage of erroneous frames in relation to number of frames received over the same time period reaches the threshold.
Status: current Access: read-only
NOTIFICATION-TYPE    

ligoWiTxRetriesThreshold 1.3.6.1.4.1.32750.3.10.1.0.7
This notification is sent when percentage of transmission retries in relation to number of frames transmitted over the same time period reaches the threshold.
Status: current Access: read-only
NOTIFICATION-TYPE    

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor