IEEE8021-TSN-REMOTE-MANAGEMENT-MIB

File: IEEE8021-TSN-REMOTE-MANAGEMENT-MIB.mib (24067 bytes)

Imported modules

SNMPv2-CONF SNMPv2-SMI SNMPv2-TC
IEEE8021-TC-MIB IEEE8021-BRIDGE-MIB IEEE8021-Q-BRIDGE-MIB

Imported symbols

OBJECT-GROUP MODULE-COMPLIANCE MODULE-IDENTITY
OBJECT-TYPE Counter64 Unsigned32
TEXTUAL-CONVENTION TruthValue RowStatus
IEEE8021BridgePortNumber ieee802dot1mibs ieee8021BridgeBasePort
ieee8021BridgeBaseComponentId ieee8021BridgeTrafficClass ieee8021QBridgeVlanIndex

Defined Types

Ieee8021TsnRemoteMgmtBridgeDelayEntry  
SEQUENCE    
  ieee8021TsnRemoteMgmtBridgeIngressPort IEEE8021BridgePortNumber
  ieee8021TsnRemoteMgmtBridgeEgressPort IEEE8021BridgePortNumber
  ieee8021TsnRemoteMgmtIndependentDelayMin Unsigned32
  ieee8021TsnRemoteMgmtIndependentDelayMax Unsigned32
  ieee8021TsnRemoteMgmtDependentDelayMin Unsigned32
  ieee8021TsnRemoteMgmtDependentDelayMax Unsigned32

Ieee8021TsnRemoteMgmtPropagationDelayEntry  
SEQUENCE    
  ieee8021TsnRemoteMgmtTxPropagationDelay Unsigned32

Ieee8021TsnRemoteMgmtMsrpMrpExternalControlEntry  
SEQUENCE    
  ieee8021TsnRemoteMgmtMsrpMrpExternalControl TruthValue
  ieee8021TsnRemoteMgmtMrpIndicationList OCTET STRING
  ieee8021TsnRemoteMgmtMrpIndicationListLength Unsigned32
  ieee8021TsnRemoteMgmtMrpIndicationChangeCounter Counter64
  ieee8021TsnRemoteMgmtMrpAdminRequestList OCTET STRING
  ieee8021TsnRemoteMgmtMrpAdminRequestListLength Unsigned32
  ieee8021TsnRemoteMgmtMrpOperRequestList OCTET STRING
  ieee8021TsnRemoteMgmtMrpOperRequestListLength Unsigned32

Defined Values

ieee8021TsnRemoteMgmtMib 1.3.111.2.802.1.1.32
The Bridge MIB module for managing devices that support the IEEE Std 802.1Q Stream Reservation Protocol Enhancements and Performance Improvements. Unless otherwise indicated, the references in this MIB module are to IEEE Std 802.1Q. Copyright (C) IEEE (2018). This version of this MIB module is part of IEEE802.1Q; see the draft itself for full legal notices.
MODULE-IDENTITY    

ieee8021TsnRemoteMgmtNotifications 1.3.111.2.802.1.1.32.0
OBJECT IDENTIFIER    

ieee8021TsnRemoteMgmtObjects 1.3.111.2.802.1.1.32.1
OBJECT IDENTIFIER    

ieee8021TsnRemoteMgmtConformance 1.3.111.2.802.1.1.32.2
OBJECT IDENTIFIER    

ieee8021TsnRemoteMgmtBridgeDelay 1.3.111.2.802.1.1.32.1.1
OBJECT IDENTIFIER    

ieee8021TsnRemoteMgmtPropagationDelay 1.3.111.2.802.1.1.32.1.2
OBJECT IDENTIFIER    

ieee8021TsnRemoteMgmtStaticTrees 1.3.111.2.802.1.1.32.1.3
OBJECT IDENTIFIER    

ieee8021TsnRemoteMgmtMrpExternalControl 1.3.111.2.802.1.1.32.1.4
OBJECT IDENTIFIER    

ieee8021TsnRemoteMgmtBridgeDelayTable 1.3.111.2.802.1.1.32.1.1.1
A table containing a set of parameters necessary to determine the delay of frames as they pass through the Bridge's relay. There is one Bridge Delay managed object per Port pair of a Bridge component. The Port pair consists of three indices, an ingress Port followed by an egress Port and a traffic class associated with the Port pair.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Ieee8021TsnRemoteMgmtBridgeDelayEntry

ieee8021TsnRemoteMgmtBridgeDelayEntry 1.3.111.2.802.1.1.32.1.1.1.1
A list of objects containing information necessary to determine the delay of frames as they pass through the Bridge's relay.
Status: current Access: not-accessible
OBJECT-TYPE    
  Ieee8021TsnRemoteMgmtBridgeDelayEntry  

ieee8021TsnRemoteMgmtBridgeIngressPort 1.3.111.2.802.1.1.32.1.1.1.1.1
...
Status: current Access: not-accessible
OBJECT-TYPE    
  IEEE8021BridgePortNumber  

ieee8021TsnRemoteMgmtBridgeEgressPort 1.3.111.2.802.1.1.32.1.1.1.1.2
...
Status: current Access: not-accessible
OBJECT-TYPE    
  IEEE8021BridgePortNumber  

ieee8021TsnRemoteMgmtIndependentDelayMin 1.3.111.2.802.1.1.32.1.1.1.1.3
This attribute provides the minimum delay independent from frame length for a frame to forward from ingress port to egress port. The delay begins when the message timestamp point of the ingress frame passes the reference plane marking the boundary between the network media and PHY. The delay ends when the message timestamp point of the egress frame passes the reference plane marking the boundary between the network media and PHY. The message timestamp point is specified by IEEE Std 802.1AS for various media, near the start of the frame. Note: This delay includes all aspects of length-independent delay for a frame that is forwarded, including handling of error conditions.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

ieee8021TsnRemoteMgmtIndependentDelayMax 1.3.111.2.802.1.1.32.1.1.1.1.4
This attribute provides the maximum delay independent from frame length for a frame to forward from ingress port to egress port. The delay begins when the message timestamp point of the ingress frame passes the reference plane marking the boundary between the network media and PHY. The delay ends when the message timestamp point of the egress frame passes the reference plane marking the boundary between the network media and PHY. The message timestamp point is specified by IEEE Std 802.1AS for various media, near the start of the frame.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

ieee8021TsnRemoteMgmtDependentDelayMin 1.3.111.2.802.1.1.32.1.1.1.1.5
This attribute provides the minimum length-dependent delay from ingress port to egress port. It provides the portion of delay that is dependent on frame length, where frame length is the number of octets that transfer across the MAC Service interfaces. Each length-dependent delay attribute specifies the time for a single octet of the frame to transfer from ingress to egress.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

ieee8021TsnRemoteMgmtDependentDelayMax 1.3.111.2.802.1.1.32.1.1.1.1.6
This attribute provides the maximum length-dependent delay from ingress port to egress port. It provides the portion of delay that is dependent on frame length, where frame length is the number of octets that transfer across the MAC Service interfaces. Each length-dependent delay attribute specifies the time for a single octet of the frame to transfer from ingress to egress.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

ieee8021TsnRemoteMgmtPropagationDelayTable 1.3.111.2.802.1.1.32.1.2.1
A table containing a set of parameters necessary to determine the delay along the network media (e.g. cable) for a frame transmitted from the specifed Port of this Bridge to the neighboring Port on a different Bridge. There is one Propagation Delay managed object per egress Port of a Bridge.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Ieee8021TsnRemoteMgmtPropagationDelayEntry

ieee8021TsnRemoteMgmtPropagationDelayEntry 1.3.111.2.802.1.1.32.1.2.1.1
A list of objects containing information necessary to determine the delay along the network media (e.g. cable) for a frame transmitted from the specifed Port of this Bridge to the neighboring Port on a different Bridge.
Status: current Access: not-accessible
OBJECT-TYPE    
  Ieee8021TsnRemoteMgmtPropagationDelayEntry  

ieee8021TsnRemoteMgmtTxPropagationDelay 1.3.111.2.802.1.1.32.1.2.1.1.1
This attribute provides the transmission propagation delay. The propagation delay begins when the message timestamp point of an egress frame passes the reference plane marking the boundary between the network media and PHY. It ends when the message timestamp point of an ingress frame on the neighboring Bridge's Port passes the reference plane marking the boundary between the network media and PHY. The message timestamp point is specified by IEEE Std 802.1AS for various media.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

ieee8021TsnRemoteMgmtStaticTreesSupported 1.3.111.2.802.1.1.32.1.3.1
This attribute is used by the TSN CNC to determine that TE-MSTID is supported by the Bridge.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

ieee8021TsnRemoteMgmtMsrpMrpExternalControlTable 1.3.111.2.802.1.1.32.1.4.1
A table containing a set of parameters necessary for a network manager to 1) disable MRP attribute propagation (MAP) for the MRP Participant of a bridge port, 2) read MRP attribute registrations that the MRP Participant receives, and 3) write MRP attribute values for the MRP Participant to declare.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Ieee8021TsnRemoteMgmtMsrpMrpExternalControlEntry

ieee8021TsnRemoteMgmtMsrpMrpExternalControlEntry 1.3.111.2.802.1.1.32.1.4.1.1
A list of objects necessary for a network manager to 1) disable MRP attribute propagation (MAP) for the MRP Participant of a bridge port, 2) read MRP attribute registrations that the MRP Participant receives, and 3) write MRP attribute values for the MRP Participant to declare.
Status: current Access: not-accessible
OBJECT-TYPE    
  Ieee8021TsnRemoteMgmtMsrpMrpExternalControlEntry  

ieee8021TsnRemoteMgmtMsrpMrpExternalControl 1.3.111.2.802.1.1.32.1.4.1.1.1
This attribute is used to indicate, whether MRP attributes are propagated on the MRP Participant, according to the specifications for MRP Attribute Propagation (MAP) and specifications of the MRP Application. When true(1), the MRP Participant is removed from the MRP Application's MAP Context. The MRP Participant performs all other aspects of MRP, including MRP operation, MRP specifications, and MRPDU encodings. The application component stores MAD indications for registration received on the Port, and invokes MAD requests for declarations on the Port. When false(2), MRP attributes propagate on the MRP Participant according to the specifications for MRP Attribute Propagation (MAP) and specifications of the MRP Application. Ports with the externalControl attribute false(2) are considered as candidates for the MRP Application's MAP Context. The remaining attributes of this subtree are ignored by Ports with the externalControl attribute false(2). This managed object applies to the MSRP application. A table is provided for each MAP Context (VLAN ID).
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

ieee8021TsnRemoteMgmtMrpIndicationList 1.3.111.2.802.1.1.32.1.4.1.1.2
This attribute is used to store the list of all joined MRP attributes for the MRP Participant when the ieee8021TsnRemoteMgmtMrpExternalControl attribute is true(1). When the ieee8021TsnRemoteMgmtMrpExternalControl attribute is false(2), this attribute is ignored by the MRP Participant, and returns the empty octet string.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

ieee8021TsnRemoteMgmtMrpIndicationListLength 1.3.111.2.802.1.1.32.1.4.1.1.3
This attribute is used to provide the number of octets in the ieee8021TsnRemoteMgmtMrpIndicationListLength attribute. When the ieee8021TsnRemoteMgmtMrpExternalControl attribute is false(2), this attribute returns zero.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

ieee8021TsnRemoteMgmtMrpIndicationChangeCounter 1.3.111.2.802.1.1.32.1.4.1.1.4
This attribute is used to provide the number of changes done to the ieee8021TsnRemoteMgmtMrpIndicationList. When the ieee8021TsnRemoteMgmtMrpExternalControl attribute is false(2), this attribute returns zero.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

ieee8021TsnRemoteMgmtMrpAdminRequestList 1.3.111.2.802.1.1.32.1.4.1.1.5
This attribute is used to provide the administrative value of the current list of MAD requests for the MRP Participant (operRequestList). Each entry in this attribute is encoded as the attribute_type parameter as a single octet, followed by the length of the attribute_value parameter as a single octet, followed by a sequence of octets for the attribute_value parameter. When the ieee8021TsnRemoteMgmtMrpExternalControl attribute is true(1), this attribute is copied to the ieee8021TsnRemoteMgmtMrpOperRequestList attribute as soon as possible according to the implementation. When the ieee8021TsnRemoteMgmtMrpExternalControl attribute is false(2), this attribute is ignored by the MRP Participant, but it retains its value.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

ieee8021TsnRemoteMgmtMrpAdminRequestListLength 1.3.111.2.802.1.1.32.1.4.1.1.6
This attribute is used to provide the administrative value for the number of octets in the ieee8021TsnRemoteMgmtMrpAdminRequestList attribute. When the ieee8021TsnRemoteMgmtMrpExternalControl attribute is true(1), this attribute is copied to the ieee8021TsnRemoteMgmtMrpOperRequestListLength attribute at the same time that the ieee8021TsnRemoteMgmtMrpAdminRequestList attribute is copied to the ieee8021TsnRemoteMgmtMrpOperRequestList attribute. When the ieee8021TsnRemoteMgmtMrpExternalControl attribute is false(2), this attribute is ignored by the MRP Participant, but it retains its value.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

ieee8021TsnRemoteMgmtMrpOperRequestList 1.3.111.2.802.1.1.32.1.4.1.1.7
This attribute is used to proivde the operational value of the current list of MAD requests for the MRP Participant.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

ieee8021TsnRemoteMgmtMrpOperRequestListLength 1.3.111.2.802.1.1.32.1.4.1.1.8
This attribute is used to provide the operational value of the ieee8021TsnRemoteMgmtMrpAdminRequestListLength attribute, and it is copied at the same time that ieee8021TsnRemoteMgmtMrpAdminRequestList attribute is copied to ieee8021TsnRemoteMgmtMrpOperRequestList.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

ieee8021TsnRemoteMgmtCompliances 1.3.111.2.802.1.1.32.2.1
OBJECT IDENTIFIER    

ieee8021TsnRemoteMgmtGroups 1.3.111.2.802.1.1.32.2.2
OBJECT IDENTIFIER    

ieee8021TsnRemoteMgmtBridgeDelayGroup 1.3.111.2.802.1.1.32.2.2.1
Objects that define the delay of frames as they pass through the Bridge's relay.
Status: current Access: read-only
OBJECT-GROUP    

ieee8021TsnRemoteMgmtPropagationDelayGroup 1.3.111.2.802.1.1.32.2.2.2
Objects that define delay of frames along the network media (e.g. cable).
Status: current Access: read-only
OBJECT-GROUP    

ieee8021TsnRemoteMgmtStaticTreesGroup 1.3.111.2.802.1.1.32.2.2.3
Objects that define static tree support.
Status: current Access: read-only
OBJECT-GROUP    

ieee8021TsnRemoteMgmtMrpExternalControlGroup 1.3.111.2.802.1.1.32.2.2.4
Objects that define configuration of MRP External control.
Status: current Access: read-only
OBJECT-GROUP    

ieee8021TsnRemoteMgmtCompliance 1.3.111.2.802.1.1.32.2.1.1
The compliance statement for devices supporting TSN Remote management. Support of the objects defined in the IEEE8021-TSN REMOTE MANAGEMENT MIB also requires support of the IEEE8021-BRIDGE-MIB; the provisions of 17.3.2 apply to implementations claiming support of the IEEE8021-TSN REMOTE MANAGEMENT MIB.
Status: current Access: read-only
MODULE-COMPLIANCE    

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor