HUAWEI-LswVLAN-MIB
File:
HUAWEI-LswVLAN-MIB.mib (31175 bytes)
Imported modules
Imported symbols
Defined Types
HwVlanIndex |
|
A value used to index per-VLAN tables: values of 0 and
4095 are not permitted; if the value is between 1 and
4094 inclusive, it represents an IEEE 802.1Q VLAN-ID with
global scope within a given bridged domain (see VlanId
textual convention). If the value is greater than 4095
then it represents a VLAN with scope local to the
particular agent, i.e. one without a global VLAN-ID
assigned to it. Such VLANs are outside the scope of
IEEE 802.1Q but it is convenient to be able to manage them
in the same way using this MIB. |
TEXTUAL-CONVENTION |
|
|
|
|
Integer32 |
0..2147483647 |
|
HwDot1qVlanMIBEntry |
|
SEQUENCE |
|
|
|
|
hwdot1qVlanIndex |
HwVlanIndex |
|
|
hwdot1qVlanName |
SnmpAdminString |
|
|
hwdot1qVlanPorts |
PortList |
|
|
hwdot1qVlanType |
INTEGER |
|
|
hwdot1qVlanMacFilter |
TruthValue |
|
|
hwdot1qVlanMcastUnknownProtos |
TruthValue |
|
|
hwExistInterface |
TruthValue |
|
|
hwVlanInterfaceIndex |
INTEGER |
|
|
hwdot1qVlanMacLearn |
TruthValue |
|
|
hwdot1qVlanStatus |
INTEGER |
|
|
hwdot1qVlanCreationTime |
TimeTicks |
|
|
hwdot1qVlanPriority |
INTEGER |
|
|
hwdot1qVlanRowStatus |
RowStatus |
|
|
hwdot1qVlanBroadcastSuppression |
INTEGER |
|
|
hwdot1qVlanBcastSuppressionPPS |
INTEGER |
|
|
hwdot1qVlanMulticast |
INTEGER |
|
|
hwdot1qVlanTaggedPorts |
PortList |
|
|
hwdot1qVlanUntaggedPorts |
PortList |
|
|
hwdot1qVlanPortIndexs |
OCTET STRING |
|
HwVlanInterfaceEntry |
|
SEQUENCE |
|
|
|
|
hwVlanInterfaceID |
INTEGER |
|
|
hwdot1qVlanID |
HwVlanIndex |
|
|
hwdot1qVlanIpAddress |
IpAddress |
|
|
hwdot1qVlanIpAddressMask |
IpAddress |
|
|
hwVlanInterfaceAdminStatus |
INTEGER |
|
|
hwVlanInterfaceFrameType |
INTEGER |
|
|
hwInterfaceRowStatus |
RowStatus |
|
|
hwVlanInterfaceIpMethod |
INTEGER |
|
|
hwVlanInterfaceIfIndex |
INTEGER |
|
HwifIsolateMappingEntry |
|
SEQUENCE |
|
|
|
|
hwifIsolatePrimaryVlanID |
HwVlanIndex |
|
|
hwifIsolateSecondaryVlanlistLow |
OCTET STRING |
|
|
hwifIsolateSecondaryVlanlistHigh |
OCTET STRING |
|
HwVlanInterfaceAddrEntry |
|
SEQUENCE |
|
|
|
|
hwVlanInterfaceIpIfIndex |
INTEGER |
|
|
hwVlanInterfaceIpAddr |
IpAddress |
|
|
hwVlanInterfaceIpMask |
IpAddress |
|
|
hwVlanInterfaceIpType |
INTEGER |
|
|
hwVlanInterfaceIpRowStatus |
RowStatus |
|
HwDot1qVlanBatchMIBEntry |
|
SEQUENCE |
|
|
|
|
hwdot1qVlanBatchOperIndex |
Integer32 |
|
|
hwdot1qVlanBatchStartIndex |
HwVlanIndex |
|
|
hwdot1qVlanBatchEndIndex |
HwVlanIndex |
|
|
hwdot1qVlanBatchOperStatus |
INTEGER |
|
|
hwdot1qVlanBatchRowStatus |
RowStatus |
|
|
hwdot1qVlanBatchSetOperate |
INTEGER |
|
HwifSuperVlanMappingEntry |
|
SEQUENCE |
|
|
|
|
hwifSuperVlanID |
HwVlanIndex |
|
|
hwifSubVlanlistLow |
OCTET STRING |
|
|
hwifSubVlanlistHigh |
OCTET STRING |
|
HwVLANMibSwitchCountEntry |
|
SEQUENCE |
|
|
|
|
hwVLANMibSwitchGMRPRXPkt |
Counter32 |
|
|
hwVLANMibSwitchGVRPRXPkt |
Counter32 |
|
|
hwVLANMibSwitchGMRPTXPkt |
Counter32 |
|
|
hwVLANMibSwitchGVRPTXPkt |
Counter32 |
|
|
hwVLANMibSwitchDiscardedPkt |
Counter32 |
|
|
hwVLANMibSwitchGarpStatClear |
INTEGER |
|
HwVLANMibHoldTimeEntry |
|
SEQUENCE |
|
|
|
|
hwVLANMibHoldTime |
INTEGER |
|
Defined Values
hwLswVlan |
1.3.6.1.4.1.2011.2.23.1.2 |
Tok_String |
MODULE-IDENTITY |
|
|
|
hwLswVlanMngObject |
1.3.6.1.4.1.2011.2.23.1.2.1 |
Description. |
Status: current |
Access: read-only |
OBJECT-IDENTITY |
|
|
|
hwdot1qVlanMIBEntry |
1.3.6.1.4.1.2011.2.23.1.2.1.1.1 |
Entries of VLAN MIB table |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
HwDot1qVlanMIBEntry |
|
|
hwdot1qVlanPorts |
1.3.6.1.4.1.2011.2.23.1.2.1.1.1.3 |
Port list of the VLAN. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
PortList |
|
|
hwdot1qVlanType |
1.3.6.1.4.1.2011.2.23.1.2.1.1.1.4 |
Vlan types: SuperVlan(1), Common vlan(2), and Sub-vlan(3). |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
superVlan(1), common-vlan(2), sub-vlan(3), isolate-user-vlan(4), secondary-vlan(5) |
|
hwExistInterface |
1.3.6.1.4.1.2011.2.23.1.2.1.1.1.7 |
Whether there is virtual interface. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
TruthValue |
|
|
hwVlanInterfaceIndex |
1.3.6.1.4.1.2011.2.23.1.2.1.1.1.8 |
Whether vlan interface is configured on vlan. If vlan interface is
configured, the value of the node is vlan id, else the value is 0. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
hwdot1qVlanMacLearn |
1.3.6.1.4.1.2011.2.23.1.2.1.1.1.9 |
MAC address learning identity. (common vlan/Sub-vlan) |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
TruthValue |
|
|
hwdot1qVlanStatus |
1.3.6.1.4.1.2011.2.23.1.2.1.1.1.10 |
Status of the VLAN. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
other(1), static(2), dynamic(3) |
|
hwdot1qVlanPriority |
1.3.6.1.4.1.2011.2.23.1.2.1.1.1.12 |
Priority of the VLAN. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..7 |
|
hwdot1qVlanBroadcastSuppression |
1.3.6.1.4.1.2011.2.23.1.2.1.1.1.14 |
Whether broadcast suppression of vlan be supported pro rata.
The vlaue of 100 indicates no broadcast suppression. If the
function is not supported, this object cannot be written,
and 100 will be returned when reading |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..100 |
|
hwdot1qVlanBcastSuppressionPPS |
1.3.6.1.4.1.2011.2.23.1.2.1.1.1.15 |
If the broadcast can be controlled with pps(packet per second)type,
the value of 0 indicates no suppression. This node is conflicted
with hwdot1qVlanBroadcastSuppression. If the mode is set,
hwdot1qVlanBroadcastSuppression is unavailable. And vice versa. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..148800 |
|
hwdot1qVlanMulticast |
1.3.6.1.4.1.2011.2.23.1.2.1.1.1.16 |
Multicast vlan. The default value is disable(0). |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
disable(0), enable(1) |
|
hwdot1qVlanPortIndexs |
1.3.6.1.4.1.2011.2.23.1.2.1.1.1.19 |
PortIndex list of the VLAN, that delimited by comma, such as 1,3,4,7. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
hwVlanInterfaceEntry |
1.3.6.1.4.1.2011.2.23.1.2.1.2.1 |
Entries of virtual interface configuration table |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
HwVlanInterfaceEntry |
|
|
hwVlanInterfaceID |
1.3.6.1.4.1.2011.2.23.1.2.1.2.1.1 |
Index of the vlan interface table. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
hwVlanInterfaceAdminStatus |
1.3.6.1.4.1.2011.2.23.1.2.1.2.1.5 |
Status of VLAN virtual interfaces. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
up(1), down(2) |
|
hwVlanInterfaceFrameType |
1.3.6.1.4.1.2011.2.23.1.2.1.2.1.6 |
Frame type accepted by VLAN virtual interfaces. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
ethernet-ii(1), ethernet-snap(2), ethernet-8022(3), ethernet-8023(4) |
|
hwVlanInterfaceIpMethod |
1.3.6.1.4.1.2011.2.23.1.2.1.2.1.8 |
Vlan interface ip address acquiring method which is manual, dhcp or bootp. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
assigned-ip(1), dhcp-ip(2), bootp-ip(3) |
|
hwVlanInterfaceIfIndex |
1.3.6.1.4.1.2011.2.23.1.2.1.2.1.9 |
IfIndex of VLAN interface. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
hwifIsolateMappingEntry |
1.3.6.1.4.1.2011.2.23.1.2.1.4.1 |
Secondary vlan lists of Isolate-VLANs. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
HwifIsolateMappingEntry |
|
|
hwifIsolateSecondaryVlanlistLow |
1.3.6.1.4.1.2011.2.23.1.2.1.4.1.2 |
Each octet within this value specifies a set of eight
VLANs, with the first octet specifying VLANs 1 through
8, the second octet specifying VLANs 9 through 16, etc.
Within each octet, the most significant bit represents
the highest numbered VLAN, and the least significant bit
represents the lowest numbered VLAN. Thus, each secondary
VLAN of the primary VLAN is represented by a single bit
within the value of this object. If that bit has a value
of '1' then that VLAN is secondary VLAN in the set of VLANs;
the VLAN is not secondary VLAN if its bit has a value of
'0'. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..256) |
|
hwifIsolateSecondaryVlanlistHigh |
1.3.6.1.4.1.2011.2.23.1.2.1.4.1.3 |
Each octet within this value specifies a set of eight
VLANs, with the first octet specifying VLANs 2049 through
2056, the second octet specifying VLANs 2057 through 2064,
etc. Within each octet, the most significant bit represents
the highest numbered VLAN, and the least significant bit
represents the lowest numbered VLAN. Thus, each secondary
VLAN of the primary VLAN is represented by a single bit
within the value of this object. If that bit has a value
of '1' then that VLAN is secondary VLAN in the set of VLANs;
the VLAN is not secondary VLAN if its bit has a value of
'0'. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..256) |
|
hwVlanInterfaceAddrEntry |
1.3.6.1.4.1.2011.2.23.1.2.1.5.1 |
Entries of VLAN interface IP address configuration table |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
HwVlanInterfaceAddrEntry |
|
|
hwVlanInterfaceIpIfIndex |
1.3.6.1.4.1.2011.2.23.1.2.1.5.1.1 |
Index of VLAN interfaces. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
hwVlanInterfaceIpAddr |
1.3.6.1.4.1.2011.2.23.1.2.1.5.1.2 |
IP address of VLAN interface. When taking destory operation,
you could set it zero to destory all IP addresses(but cluster
IP address) in this VLAN interface. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
hwVlanInterfaceIpMask |
1.3.6.1.4.1.2011.2.23.1.2.1.5.1.3 |
IP address mask of VLAN interface. When destory single IP address,
you must set it correct to relative IP address. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
hwVlanInterfaceIpType |
1.3.6.1.4.1.2011.2.23.1.2.1.5.1.4 |
IP address type. cluster(3) will only be set when taking GET or
GET NEXT operation. primary(1) is optional when taking SET primary
IP address operation. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
primary(1), sub(2), cluster(3), vrrp(4) |
|
hwVlanInterfaceIpRowStatus |
1.3.6.1.4.1.2011.2.23.1.2.1.5.1.5 |
Operation status. active(1) will only be set when taking GET or
GET NEXT operation. createAndGo(4) and destory(6) is valid when
taking SET operation. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
RowStatus |
|
|
hwdot1qVlanBatchMIBTable |
1.3.6.1.4.1.2011.2.23.1.2.1.6 |
VLAN batch configuration table.
In the case of VLAN batch creation, hwdot1qVlanBatchSetOperate should
be set to 1.
For example, if creating a row is for creating VLANs 2 to 4, the value
of the objects should be set as follows:
hwdot1qVlanBatchStartIndex 2,
hwdot1qVlanBatchEndIndex 4,
hwdot1qVlanBatchSetOperate create(1),
hwdot1qVlanBatchRowStatus createAndGo(4).
In the case of VLAN batch deletion, hwdot1qVlanBatchSetOperate should
be set to 2.
For example, if creating a row is for deleting VLANs 10 to 20, the value
of the objects should be set as follows:
hwdot1qVlanBatchStartIndex 10,
hwdot1qVlanBatchEndIndex 20,
hwdot1qVlanBatchSetOperate delete(2),
hwdot1qVlanBatchRowStatus createAndGo(4).
When the action of batch VLANs deleting or creating is done, one row
will be existent until it is deleted manually or ages out, but the VLANs
of it won't disappear with the deletion of the row. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
HwDot1qVlanBatchMIBEntry |
|
hwDot1qVlanBatchMIBEntry |
1.3.6.1.4.1.2011.2.23.1.2.1.6.1 |
VLAN batch configuration entry. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
HwDot1qVlanBatchMIBEntry |
|
|
hwdot1qVlanBatchOperStatus |
1.3.6.1.4.1.2011.2.23.1.2.1.6.1.4 |
The status of operation. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
opInprogress(1), opfailure(2), opsuccess(3), opsuccesspartial(4) |
|
hwdot1qVlanBatchSetOperate |
1.3.6.1.4.1.2011.2.23.1.2.1.6.1.6 |
VLAN batch creation or deletion. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
INTEGER |
create(1), delete(2) |
|
hwifSuperVlanMappingEntry |
1.3.6.1.4.1.2011.2.23.1.2.1.7.1 |
Sub VLAN lists of super-VLANs. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
HwifSuperVlanMappingEntry |
|
|
hwifSubVlanlistLow |
1.3.6.1.4.1.2011.2.23.1.2.1.7.1.2 |
Each octet within this value specifies a set of eight
VLANs, with the first octet specifying VLANs 1 through
8, the second octet specifying VLANs 9 through 16, etc.
Within each octet, the most significant bit represents
the highest numbered VLAN, and the least significant bit
represents the lowest numbered VLAN. Thus, each sub
VLAN of the super VLAN is represented by a single bit
within the value of this object. If that bit has a value
of '1' then that VLAN is a sub VLAN of the super VLAN; the
VLAN is not a sub VLAN of the super VLAN if its bit has
a value of '0'. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..256) |
|
hwifSubVlanlistHigh |
1.3.6.1.4.1.2011.2.23.1.2.1.7.1.3 |
Each octet within this value specifies a set of eight
VLANs, with the first octet specifying VLANs 2049 through
2056, the second octet specifying VLANs 2057 through 2064,
etc. Within each octet, the most significant bit represents
the highest numbered VLAN, and the least significant bit
represents the lowest numbered VLAN. Thus, each sub
VLAN of the super VLAN is represented by a single bit
within the value of this object. If that bit has a value of
'1' then that VLAN is a sub VLAN of the super VLAN; the
VLAN is not a sub VLAN of the super VLAN if its bit has
a value of '0'. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..256) |
|
hwLswVlanProtoObject |
1.3.6.1.4.1.2011.2.23.1.2.2 |
Description. |
Status: current |
Access: read-write |
OBJECT-IDENTITY |
|
|
|
hwvLANMibSwitchCountEntry |
1.3.6.1.4.1.2011.2.23.1.2.2.15.1 |
A table containing the information various statistics of switch. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
HwVLANMibSwitchCountEntry |
|
|
hwVLANMibSwitchGarpStatClear |
1.3.6.1.4.1.2011.2.23.1.2.2.15.1.6 |
Clear various Statistics viz. read operation not supported. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
clear(1) |
|
hwvLANMibHoldTimeEntry |
1.3.6.1.4.1.2011.2.23.1.2.2.16.1 |
A table for setting/getting the HoldTime of the port. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
HwVLANMibHoldTimeEntry |
|
|
hwVLANMibHoldTime |
1.3.6.1.4.1.2011.2.23.1.2.2.16.1.1 |
HoldTime of the port. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
10..32765 |
|