HPN-ICF-DOT11-RRM-MIB

File: HPN-ICF-DOT11-RRM-MIB.mib (46513 bytes)

Imported modules

HPN-ICF-DOT11-REF-MIB SNMPv2-SMI SNMPv2-TC

Imported symbols

HpnicfDot11RadioType HpnicfDot11ChannelScopeType HpnicfDot11RadioElementIndex
HpnicfDot11RadioScopeType hpnicfDot11APElementIndex Integer32
Unsigned32 OBJECT-TYPE MODULE-IDENTITY
NOTIFICATION-TYPE TruthValue MacAddress
DateAndTime RowStatus hpnicfDot11
HpnicfDot11ObjectIDType HpnicfDot11SSIDStringType

Defined Types

HpnicfDot11RRMRadioCfgEntry  
SEQUENCE    
  hpnicfDot11RRMRadioType HpnicfDot11RadioType
  hpnicfDot11RRMCfgChlState TruthValue
  hpnicfDot11RRMCfgChlMode INTEGER
  hpnicfDot11RRMChlProntoRadioElmt Unsigned32
  hpnicfDot11RRMCfgPwrState TruthValue
  hpnicfDot11RRMCfgPwrMode INTEGER
  hpnicfDot11RRMPwrProntoRadioElmt Unsigned32
  hpnicfDot11RRMCfgIntrvl Integer32
  hpnicfDot11RRMCfgIntrfThres Integer32
  hpnicfDot11RRMCfgNoiseThres Integer32
  hpnicfDot11RRMCfgPERThres Integer32
  hpnicfDot11RRMCfgToleranceFctr Integer32
  hpnicfDot11RRMCfgAdjacencyFctr Integer32

HpnicfDot11RRMAPCfgEntry  
SEQUENCE    
  hpnicfDot11RRMAPWorkMode INTEGER

HpnicfDot11RRMSDRadioGroupEntry  
SEQUENCE    
  hpnicfDot11RRMSDRadioGroupId Unsigned32
  hpnicfDot11RRMSDRadioGroupDesc STRING
  hpnicfDot11RRMSDRdGrpChlHolddownTm Unsigned32
  hpnicfDot11RRMSDRdGrpPwrHolddownTm Unsigned32
  hpnicfDot11RRMSDRdGroupRowStatus RowStatus

HpnicfDot11RRMAPCfg2Entry  
SEQUENCE    
  hpnicfDot11RRMAPSerialID HpnicfDot11ObjectIDType
  hpnicfDot11RRMAPIntfThreshold Integer32
  hpnicfDot11RRMStaIntfThreshold Integer32
  hpnicfDot11RRMCoChlIntfTrapThhd Integer32
  hpnicfDot11RRMAdjChlIntfTrapThhd Integer32

HpnicfDot11RRMChlRptEntry  
SEQUENCE    
  hpnicfDot11RRMRadioIndex HpnicfDot11RadioElementIndex
  hpnicfDot11RRMChlRptChlNum Integer32
  hpnicfDot11RRMChlRptChlType INTEGER
  hpnicfDot11RRMChlRptChlQlty INTEGER
  hpnicfDot11RRMChlRptNbrCnt Integer32
  hpnicfDot11RRMChlRptLoad Integer32
  hpnicfDot11RRMChlRptUtlz Integer32
  hpnicfDot11RRMChlRptIntrf Integer32
  hpnicfDot11RRMChlRptPER Integer32
  hpnicfDot11RRMChlRptRetryRate Integer32
  hpnicfDot11RRMChlRptNoise Integer32
  hpnicfDot11RRMChlRptRadarIndtcr INTEGER

HpnicfDot11RRMNbrInfoEntry  
SEQUENCE    
  hpnicfDot11RrmNbrBSSID MacAddress
  hpnicfDot11RrmNbrChl HpnicfDot11ChannelScopeType
  hpnicfDot11RRMNbrIntrf Integer32
  hpnicfDot11RrmNbrRSSI Integer32
  hpnicfDot11RrmNbrType INTEGER
  hpnicfDot11RrmNbrSSID HpnicfDot11SSIDStringType

HpnicfDot11RRMHistoryEntry  
SEQUENCE    
  hpnicfDot11RRMHistoryId Integer32
  hpnicfDot11RRMHistoryRecIndctr INTEGER
  hpnicfDot11RRMHistoryChl HpnicfDot11ChannelScopeType
  hpnicfDot11RRMHistoryPwr Integer32
  hpnicfDot11RRMHistoryLoad Integer32
  hpnicfDot11RRMHistoryUtlz Integer32
  hpnicfDot11RRMHistoryIntrf Integer32
  hpnicfDot11RRMHistoryNoise Integer32
  hpnicfDot11RRMHistoryPER Integer32
  hpnicfDot11RRMHistoryRetryRate Integer32
  hpnicfDot11RRMHistoryChgReason BITS
  hpnicfDot11RRMHistoryChgDateTime DateAndTime

HpnicfDot11RRMRadioNbrInfoEntry  
SEQUENCE    
  hpnicfDot11RRMRadioNbrAPID HpnicfDot11ObjectIDType
  hpnicfDot11RRMRadioNbrRadioID HpnicfDot11RadioScopeType
  hpnicfDot11RRMRadioNbrSSID STRING

HpnicfDot11MonitorDetectedDevEntry  
SEQUENCE    
  hpnicfDot11MonitorDevMAC MacAddress
  hpnicfDot11MonitorDevType INTEGER
  hpnicfDot11MonitorDevVendor STRING
  hpnicfDot11MonitorDevSSID STRING
  hpnicfDot11MonitorDevBSSID MacAddress
  hpnicfDot11MonitorDevChannel HpnicfDot11ChannelScopeType
  hpnicfDot11MonitorRadioId HpnicfDot11RadioScopeType
  hpnicfDot11MonitorDevMaxRSSI Integer32
  hpnicfDot11MonitorDevBeaconIntvl Integer32
  hpnicfDot11MonitorDevFstDctTime DateAndTime
  hpnicfDot11MonitorDevLstDctTime DateAndTime
  hpnicfDot11MonitorDevClear TruthValue
  hpnicfDot11MonitorDevSNR Integer32

Defined Values

hpnicfDot11RRM 1.3.6.1.4.1.11.2.14.11.15.2.75.8
This MIB file is to provide the object definition of WLAN radio resource management (RRM).
MODULE-IDENTITY    

hpnicfDot11RRMConfigGroup 1.3.6.1.4.1.11.2.14.11.15.2.75.8.1
OBJECT IDENTIFIER    

hpnicfDot11RRMGlobalCfgPara 1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.1
OBJECT IDENTIFIER    

hpnicfDot11RRM11nMadtMaxMcs 1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.1.1
Specify the maximum modulation and coding scheme (MCS) index for 802.11n mandatory rates. The value 255 indicates that no maximum MCS index is specified. No maximum MCS index is specified for 802.11n mandatory rates by default. Besides 255, the specified maximum MCS index for 802.11n supported rates must be no less than the specified maximum MCS index for 802.11n mandatory rates.
OBJECT-TYPE    
  Integer32 0..76 | 255  

hpnicfDot11RRM11nSuptMaxMcs 1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.1.2
Specify the maximum Modulation and Coding Scheme (MCS) index for 802.11n supported rates. The specified maximum MCS index for 802.11n supported rates must be no less than the specified maximum MCS index for 802.11n mandatory rates.
OBJECT-TYPE    
  Integer32 0..76  

hpnicfDot11RRM11gProtect 1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.1.3
Enable/Disable dot11g protection.
OBJECT-TYPE    
  TruthValue  

hpnicfDot11RRM11aPwrConstrt 1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.1.4
Configure the power constraint for all 802.11a radios. The configured power constraint is advertised in beacons if spectrum management is enabled. The range of power constraint is 0 to MAX-POWER-1 (where the MAX-POWER is defined by the regulatory domain).
OBJECT-TYPE    
  Integer32  

hpnicfDot11RRM11aSpectrumManag 1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.1.5
Enable/Disable spectrum management for 802.11a radios. When spectrum management is enabled, the WLAN sub-system advertises power capabilities of the AP and power constraints applicable to all devices in the BSS based on regulatory domain specification.
OBJECT-TYPE    
  TruthValue  

hpnicfDot11RRMAutoChlAvoid11h 1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.1.6
Configure the auto-channel set as non-dot11h channels, this is, only the non-dot11h channels belonging to the country code are scanned during initial channel selection and one of them is selected.
OBJECT-TYPE    
  TruthValue  

hpnicfDot11RRMScanChl 1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.1.7
Set the scan mode. auto: When this option is set, all channels of the country code being set are scanned. all: When this option is set, all the channels of the radio band are scanned.
OBJECT-TYPE    
  INTEGER auto(1), all(2)  

hpnicfDot11RRMScanRptIntvel 1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.1.8
Set the scan report interval.
OBJECT-TYPE    
  Integer32 5..120  

hpnicfDot11APInterfNumThreshhd 1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.1.9
Represents threshold of AP interference . If the value of AP interference exceeds this threshold, AP interference trap will be sent. If the value of this node is zero, AP interference trap will be sent immediately.
OBJECT-TYPE    
  Integer32  

hpnicfDot11StaInterfNumThreshhd 1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.1.10
Represents threshold of STA interference. If the value of STA interference exceeds this threshold, STA interference trap will be sent. If the value of this node is zero, STA interference trap will be sent immediately.
OBJECT-TYPE    
  Integer32  

hpnicfDot11RRM11nMultiCastMcs 1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.1.11
Specify the modulation and coding scheme (MCS) index for 802.11n multicast rates. The value 4294967295 indicates that no MCS index is specified. No MCS index is specified for 802.11n multicast rates by default. Besides 4294967295, the specified MCS index for 802.11n multicast rates must be no less than the specified maximum MCS index for 802.11n mandatory rates. Before configure the MCS index for 802.11n multicast rates, the maximum MCS index for 802.11n mandatory rates must be configured
OBJECT-TYPE    
  Unsigned32 0..76 | 4294967295  

hpnicfDot11RRM11acMadtMaxNss 1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.1.12
Specify the maximum NSS index for 802.11ac mandatory rates. The value 0 indicates that no maximum NSS index is specified. No maximum NSS index is specified for 802.11ac mandatory rates by default. The specified maximum NSS index for 802.11ac supported rates must be no less than the specified maximum NSS index for 802.11ac mandatory rates.
OBJECT-TYPE    
  Integer32 0..8  

hpnicfDot11RRM11acSuptMaxNss 1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.1.13
Specify the maximum NSS index for 802.11ac supported rates. The specified maximum NSS index for 802.11ac supported rates must be no less than the specified maximum NSS index for 802.11ac mandatory rates.
OBJECT-TYPE    
  Integer32 1..8  

hpnicfDot11RRM11acMultiCastNss 1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.1.14
Specify the NSS index for 802.11ac multicast rates. The value 0 indicates that no NSS index is specified. No NSS index is specified for 802.11ac multicast rates by default. The specified NSS index for 802.11ac multicast rates must be no less than the specified maximum NSS index for 802.11ac mandatory rates. Before configuring the NSS index for 802.11ac multicast rates, the maximum NSS index for 802.11ac mandatory rates must be configured. Besides, it must be configured together with the node below.
OBJECT-TYPE    
  Integer32 0..8  

hpnicfDot11RRM11acMultiCastVhtMcs 1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.1.15
Specify the MCS index for 802.11ac multicast rates. The value 255 indicates that no MCS index is specified. No MCS index is specified for 802.11ac multicast rates by default. Besides, it must be configured together with the node above.
OBJECT-TYPE    
  Integer32 0..9 | 255  

hpnicfDot11RRMRadioCfgTable 1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.2
Configure WLAN RRM based radio type. When 802.11b parameter is modified, 802.11g parameter will be changed at the same time. In the same way, when 802.11g parameter is modified, 802.11b parameter will be changed at the same time.
OBJECT-TYPE    
  SEQUENCE OF  
    HpnicfDot11RRMRadioCfgEntry

hpnicfDot11RRMRadioCfgEntry 1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.2.1
Configure WLAN RRM based radio type. When 802.11b parameter is modified, 802.11g parameter will be changed at the same time. In the same way, when 802.11g parameter is modified, 802.11b parameter will be changed at the same time.
OBJECT-TYPE    
  HpnicfDot11RRMRadioCfgEntry  

hpnicfDot11RRMRadioType 1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.2.1.1
802.11 radio type.
OBJECT-TYPE    
  HpnicfDot11RadioType  

hpnicfDot11RRMCfgChlState 1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.2.1.2
Enable/Disable dynamic channel selection.
OBJECT-TYPE    
  TruthValue  

hpnicfDot11RRMCfgChlMode 1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.2.1.3
Configure the mode of channel selection. This node can be configured only when dynamic channel selection is enabled.
OBJECT-TYPE    
  INTEGER selfDecisive(1), userTriggered(2)  

hpnicfDot11RRMChlProntoRadioElmt 1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.2.1.4
Specify the AP and radio that will change channel at next calibration cycle. 0 is returned when getting the value of this node. This node can be configured only when the mode of channel selection control is user-triggered. When configuring, the higher 24 bits stand for the AP index, and the last 8 bits stand for the radio index. 4294967295 stand for configuring each radio on all APs.
OBJECT-TYPE    
  Unsigned32  

hpnicfDot11RRMCfgPwrState 1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.2.1.5
Enable/Disable dynamic power selection for the band.
OBJECT-TYPE    
  TruthValue  

hpnicfDot11RRMCfgPwrMode 1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.2.1.6
Configure the mode of transmit power control. This node can be configured only when dynamic power selection is enabled.
OBJECT-TYPE    
  INTEGER selfDecisive(1), userTriggered(2)  

hpnicfDot11RRMPwrProntoRadioElmt 1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.2.1.7
Specify the AP and radio that will change power at next calibration cycle. 0 is returned when getting the value of this node. This node can be configured only when the mode of transmit power control is user-triggered. When configuring, the higher 24 bits stand for the AP index, and the last 8 bits stand for the radio index. 4294967295 stand for configuring each radio on all APs.
OBJECT-TYPE    
  Unsigned32  

hpnicfDot11RRMCfgIntrvl 1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.2.1.8
Configure the calibration interval.
OBJECT-TYPE    
  Integer32  

hpnicfDot11RRMCfgIntrfThres 1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.2.1.9
Configure the interface threshold. By default, interference observed on an operating channel is considered during dynamic frequency selection and transmit power control. If the interference percentage on the channel reaches the set threshold, RRM will perform resource adjustment to control the situation.
OBJECT-TYPE    
  Integer32 1..100  

hpnicfDot11RRMCfgNoiseThres 1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.2.1.10
Configure the noise threshold.
OBJECT-TYPE    
  Integer32 -127..127  

hpnicfDot11RRMCfgPERThres 1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.2.1.11
Configure the CRC error threshold. If the percentage of CRC errors reaches the threshold, RRM will perform resource adjustment to control the situation.
OBJECT-TYPE    
  Integer32 1..100  

hpnicfDot11RRMCfgToleranceFctr 1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.2.1.12
Configure the tolerance level. During dynamic frequency selection (DFS), the channel will be changed only if there is a better channel having lesser interference and packet error rate than those specified by the user.
OBJECT-TYPE    
  Integer32 1..45  

hpnicfDot11RRMCfgAdjacencyFctr 1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.2.1.13
Configure the adjacency factor for the band. If transmit power control (TPC) is configured, power will be adjusted when the nth neighbor is detected. The value n is the adjacency factor.
OBJECT-TYPE    
  Integer32 1..16  

hpnicfDot11RRMAPCfgTable 1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.3
This table defines the RRM parameters for AP.
OBJECT-TYPE    
  SEQUENCE OF  
    HpnicfDot11RRMAPCfgEntry

hpnicfDot11RRMAPCfgEntry 1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.3.1
Each entry contains information of RRM parameters for AP.
OBJECT-TYPE    
  HpnicfDot11RRMAPCfgEntry  

hpnicfDot11RRMAPWorkMode 1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.3.1.1
AP work mode.
OBJECT-TYPE    
  INTEGER normal(1), monitor(2), hybrid(3)  

hpnicfDot11RRMSDRadioGroupTable 1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.4
This table defines RRM self-decisive radio group.
OBJECT-TYPE    
  SEQUENCE OF  
    HpnicfDot11RRMSDRadioGroupEntry

hpnicfDot11RRMSDRadioGroupEntry 1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.4.1
Each entry contains information of one RRM self-decisive radio group.
OBJECT-TYPE    
  HpnicfDot11RRMSDRadioGroupEntry  

hpnicfDot11RRMSDRadioGroupId 1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.4.1.1
Represents RRM self-decisive radio group ID.
OBJECT-TYPE    
  Unsigned32  

hpnicfDot11RRMSDRadioGroupDesc 1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.4.1.2
Represents the description of RRM self-decisive radio group.
OBJECT-TYPE    
  STRING  

hpnicfDot11RRMSDRdGrpChlHolddownTm 1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.4.1.3
Represents the channel holddown time of RRM self-decisive radio group.
OBJECT-TYPE    
  Unsigned32  

hpnicfDot11RRMSDRdGrpPwrHolddownTm 1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.4.1.4
Represents the power holddown time of RRM self-decisive radio group.
OBJECT-TYPE    
  Unsigned32  

hpnicfDot11RRMSDRdGroupRowStatus 1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.4.1.5
The row status of this table entry.
OBJECT-TYPE    
  RowStatus  

hpnicfDot11RRMAPCfg2Table 1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.5
This table defines the RRM parameters for AP.
OBJECT-TYPE    
  SEQUENCE OF  
    HpnicfDot11RRMAPCfg2Entry

hpnicfDot11RRMAPCfg2Entry 1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.5.1
Each entry contains information of RRM parameters for AP.
OBJECT-TYPE    
  HpnicfDot11RRMAPCfg2Entry  

hpnicfDot11RRMAPSerialID 1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.5.1.1
Serial ID of the AP.
OBJECT-TYPE    
  HpnicfDot11ObjectIDType  

hpnicfDot11RRMAPIntfThreshold 1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.5.1.2
Represents threshold of AP interference . If the number of AP interference exceeds this threshold, AP interference trap will be sent.
OBJECT-TYPE    
  Integer32  

hpnicfDot11RRMStaIntfThreshold 1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.5.1.3
Represents threshold of STA interference. If the number of STA interference exceeds this threshold, station interference trap will be sent.
OBJECT-TYPE    
  Integer32  

hpnicfDot11RRMCoChlIntfTrapThhd 1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.5.1.4
Represents threshold of interference trap with current ap. If signal strength of the device exceeds this threshold, corresponding trap will be sent.
OBJECT-TYPE    
  Integer32  

hpnicfDot11RRMAdjChlIntfTrapThhd 1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.5.1.5
Represents threshold of adjacent interference trap with current ap. If signal strength of the device exceeds this threshold, corresponding trap will be sent.
OBJECT-TYPE    
  Integer32  

hpnicfDot11RRMDetectGroup 1.3.6.1.4.1.11.2.14.11.15.2.75.8.2
OBJECT IDENTIFIER    

hpnicfDot11RRMChlRptTable 1.3.6.1.4.1.11.2.14.11.15.2.75.8.2.1
This table shows the RRM channel information of each radio on all APs.
OBJECT-TYPE    
  SEQUENCE OF  
    HpnicfDot11RRMChlRptEntry

hpnicfDot11RRMChlRptEntry 1.3.6.1.4.1.11.2.14.11.15.2.75.8.2.1.1
Each entry contains information of RRM channel information of the radio on the AP.
OBJECT-TYPE    
  HpnicfDot11RRMChlRptEntry  

hpnicfDot11RRMRadioIndex 1.3.6.1.4.1.11.2.14.11.15.2.75.8.2.1.1.1
Represents index of the radio.
OBJECT-TYPE    
  HpnicfDot11RadioElementIndex  

hpnicfDot11RRMChlRptChlNum 1.3.6.1.4.1.11.2.14.11.15.2.75.8.2.1.1.2
Channel number.
OBJECT-TYPE    
  Integer32  

hpnicfDot11RRMChlRptChlType 1.3.6.1.4.1.11.2.14.11.15.2.75.8.2.1.1.3
Channel type.
OBJECT-TYPE    
  INTEGER primeChannel(1), offChannel(2)  

hpnicfDot11RRMChlRptChlQlty 1.3.6.1.4.1.11.2.14.11.15.2.75.8.2.1.1.4
Channel quality.
OBJECT-TYPE    
  INTEGER good(1), bad(2)  

hpnicfDot11RRMChlRptNbrCnt 1.3.6.1.4.1.11.2.14.11.15.2.75.8.2.1.1.5
Number of neighbors found on the channel.
OBJECT-TYPE    
  Integer32  

hpnicfDot11RRMChlRptLoad 1.3.6.1.4.1.11.2.14.11.15.2.75.8.2.1.1.6
Load observed on the channel in percentage.
OBJECT-TYPE    
  Integer32 0..100  

hpnicfDot11RRMChlRptUtlz 1.3.6.1.4.1.11.2.14.11.15.2.75.8.2.1.1.7
Utilization of the channel in percentage.
OBJECT-TYPE    
  Integer32 0..100  

hpnicfDot11RRMChlRptIntrf 1.3.6.1.4.1.11.2.14.11.15.2.75.8.2.1.1.8
Interference observed on the channel in percentage.
OBJECT-TYPE    
  Integer32 0..100  

hpnicfDot11RRMChlRptPER 1.3.6.1.4.1.11.2.14.11.15.2.75.8.2.1.1.9
Packet error rate observed on the channel in percentage.
OBJECT-TYPE    
  Integer32 0..100  

hpnicfDot11RRMChlRptRetryRate 1.3.6.1.4.1.11.2.14.11.15.2.75.8.2.1.1.10
Percentage of retransmission happened on the channel.
OBJECT-TYPE    
  Integer32 0..100  

hpnicfDot11RRMChlRptNoise 1.3.6.1.4.1.11.2.14.11.15.2.75.8.2.1.1.11
Noise observed on the channel.
OBJECT-TYPE    
  Integer32  

hpnicfDot11RRMChlRptRadarIndtcr 1.3.6.1.4.1.11.2.14.11.15.2.75.8.2.1.1.12
Radar detection status.
OBJECT-TYPE    
  INTEGER detected(1), notDetected(2)  

hpnicfDot11RRMNbrInfoTable 1.3.6.1.4.1.11.2.14.11.15.2.75.8.2.2
This table shows the RRM neighbor information of each radio on all APs.
OBJECT-TYPE    
  SEQUENCE OF  
    HpnicfDot11RRMNbrInfoEntry

hpnicfDot11RRMNbrInfoEntry 1.3.6.1.4.1.11.2.14.11.15.2.75.8.2.2.1
Each entry contains information of RRM neighbor information of the radio on an AP.
OBJECT-TYPE    
  HpnicfDot11RRMNbrInfoEntry  

hpnicfDot11RrmNbrBSSID 1.3.6.1.4.1.11.2.14.11.15.2.75.8.2.2.1.1
MAC address of the AP.
OBJECT-TYPE    
  MacAddress  

hpnicfDot11RrmNbrChl 1.3.6.1.4.1.11.2.14.11.15.2.75.8.2.2.1.2
Channel number on which the neighbor was found.
OBJECT-TYPE    
  HpnicfDot11ChannelScopeType  

hpnicfDot11RRMNbrIntrf 1.3.6.1.4.1.11.2.14.11.15.2.75.8.2.2.1.3
Interference observed on the channel in percentage by neighbor.
OBJECT-TYPE    
  Integer32 0..100  

hpnicfDot11RrmNbrRSSI 1.3.6.1.4.1.11.2.14.11.15.2.75.8.2.2.1.4
Signal strength of the AP in dBm.
OBJECT-TYPE    
  Integer32  

hpnicfDot11RrmNbrType 1.3.6.1.4.1.11.2.14.11.15.2.75.8.2.2.1.5
Type of the AP, managed or unmanaged.
OBJECT-TYPE    
  INTEGER managed(1), unmanaged(2)  

hpnicfDot11RrmNbrSSID 1.3.6.1.4.1.11.2.14.11.15.2.75.8.2.2.1.6
SSID of the Neighbor.
OBJECT-TYPE    
  HpnicfDot11SSIDStringType  

hpnicfDot11RRMHistoryTable 1.3.6.1.4.1.11.2.14.11.15.2.75.8.2.3
This table shows the details of the latest three channel changes and power changes applied on all APs, including time of change, reason of the change and the channel, power, interference parameters.
OBJECT-TYPE    
  SEQUENCE OF  
    HpnicfDot11RRMHistoryEntry

hpnicfDot11RRMHistoryEntry 1.3.6.1.4.1.11.2.14.11.15.2.75.8.2.3.1
Each entry shows the details of channel and power changes.
OBJECT-TYPE    
  HpnicfDot11RRMHistoryEntry  

hpnicfDot11RRMHistoryId 1.3.6.1.4.1.11.2.14.11.15.2.75.8.2.3.1.1
History number of the change.
OBJECT-TYPE    
  Integer32  

hpnicfDot11RRMHistoryRecIndctr 1.3.6.1.4.1.11.2.14.11.15.2.75.8.2.3.1.2
History record type of the change.
OBJECT-TYPE    
  INTEGER before(1), after(2)  

hpnicfDot11RRMHistoryChl 1.3.6.1.4.1.11.2.14.11.15.2.75.8.2.3.1.3
Channel on which the radio operates before/after the change of channel or power.
OBJECT-TYPE    
  HpnicfDot11ChannelScopeType  

hpnicfDot11RRMHistoryPwr 1.3.6.1.4.1.11.2.14.11.15.2.75.8.2.3.1.4
Power of the radio before/after the change of channel or power.
OBJECT-TYPE    
  Integer32  

hpnicfDot11RRMHistoryLoad 1.3.6.1.4.1.11.2.14.11.15.2.75.8.2.3.1.5
Load observed on the radio in percentage before/after the change of channel or power.
OBJECT-TYPE    
  Integer32 0..100  

hpnicfDot11RRMHistoryUtlz 1.3.6.1.4.1.11.2.14.11.15.2.75.8.2.3.1.6
Utilization of the radio in percentage before/after the change of channel or power.
OBJECT-TYPE    
  Integer32 0..100  

hpnicfDot11RRMHistoryIntrf 1.3.6.1.4.1.11.2.14.11.15.2.75.8.2.3.1.7
Interference observed on the radio in percentage before/after the change of channel or power.
OBJECT-TYPE    
  Integer32 0..100  

hpnicfDot11RRMHistoryNoise 1.3.6.1.4.1.11.2.14.11.15.2.75.8.2.3.1.8
Noise observed on the radio before/after the change of channel or power.
OBJECT-TYPE    
  Integer32  

hpnicfDot11RRMHistoryPER 1.3.6.1.4.1.11.2.14.11.15.2.75.8.2.3.1.9
Packet error rate observed on the radio in percentage before/after the change of channel or power.
OBJECT-TYPE    
  Integer32 0..100  

hpnicfDot11RRMHistoryRetryRate 1.3.6.1.4.1.11.2.14.11.15.2.75.8.2.3.1.10
Percentage of retransmission happened on the radio before/after the change of channel or power.
OBJECT-TYPE    
  Integer32 0..100  

hpnicfDot11RRMHistoryChgReason 1.3.6.1.4.1.11.2.14.11.15.2.75.8.2.3.1.11
Reason for the change of channel or power. The various bit positions are: |0 |Others | |1 |Coverage | |2 |Radar | |3 |Retransmission | |4 |Packets discarded | |5 |Interference | 0 is returned when the history record type is after.
OBJECT-TYPE    
  BITS others(0), coverage(1), radar(2), retransmission(3), packetsDiscarded(4), interference(5)  

hpnicfDot11RRMHistoryChgDateTime 1.3.6.1.4.1.11.2.14.11.15.2.75.8.2.3.1.12
The time when the channel or power change occurred.
OBJECT-TYPE    
  DateAndTime  

hpnicfDot11RRMRadioNbrInfoTable 1.3.6.1.4.1.11.2.14.11.15.2.75.8.2.4
This table shows the RRM neighbor information of each radio on all APs.
OBJECT-TYPE    
  SEQUENCE OF  
    HpnicfDot11RRMRadioNbrInfoEntry

hpnicfDot11RRMRadioNbrInfoEntry 1.3.6.1.4.1.11.2.14.11.15.2.75.8.2.4.1
Each entry contains information of RRM neighbor information of the radio on an AP.
OBJECT-TYPE    
  HpnicfDot11RRMRadioNbrInfoEntry  

hpnicfDot11RRMRadioNbrAPID 1.3.6.1.4.1.11.2.14.11.15.2.75.8.2.4.1.1
AP serial id.
OBJECT-TYPE    
  HpnicfDot11ObjectIDType  

hpnicfDot11RRMRadioNbrRadioID 1.3.6.1.4.1.11.2.14.11.15.2.75.8.2.4.1.2
Radio Id on AP.
OBJECT-TYPE    
  HpnicfDot11RadioScopeType  

hpnicfDot11RRMRadioNbrSSID 1.3.6.1.4.1.11.2.14.11.15.2.75.8.2.4.1.3
All neighbour SSIDs scanned by the selected radio.
OBJECT-TYPE    
  STRING  

hpnicfDot11RRMNotifyGroup 1.3.6.1.4.1.11.2.14.11.15.2.75.8.3
OBJECT IDENTIFIER    

hpnicfDot11RRMChlQltyNotifications 1.3.6.1.4.1.11.2.14.11.15.2.75.8.3.1
OBJECT IDENTIFIER    

hpnicfDot11RRMChlQltyNtfPrefix 1.3.6.1.4.1.11.2.14.11.15.2.75.8.3.1.0
OBJECT IDENTIFIER    

hpnicfDot11RRMIntrfLimit 1.3.6.1.4.1.11.2.14.11.15.2.75.8.3.1.0.1
This notification will be sent when interference on the radio exceeds the limit.
NOTIFICATION-TYPE    

hpnicfDot11RRMPERLimit 1.3.6.1.4.1.11.2.14.11.15.2.75.8.3.1.0.2
This notification will be sent when packet error rate on the radio exceeds the limit.
NOTIFICATION-TYPE    

hpnicfDot11RRMNoiseLimit 1.3.6.1.4.1.11.2.14.11.15.2.75.8.3.1.0.3
This notification will be sent when noise on the radio exceeds the limit.
NOTIFICATION-TYPE    

hpnicfDot11RRMResChgNotifications 1.3.6.1.4.1.11.2.14.11.15.2.75.8.3.2
OBJECT IDENTIFIER    

hpnicfDot11RRMResChgNtfPrefix 1.3.6.1.4.1.11.2.14.11.15.2.75.8.3.2.0
OBJECT IDENTIFIER    

hpnicfDot11RRMPowerChange 1.3.6.1.4.1.11.2.14.11.15.2.75.8.3.2.0.1
This notification will be sent when power changed on the radio automatically.
NOTIFICATION-TYPE    

hpnicfDot11RRMNotificationsVar 1.3.6.1.4.1.11.2.14.11.15.2.75.8.3.3
OBJECT IDENTIFIER    

hpnicfDot11NewPower 1.3.6.1.4.1.11.2.14.11.15.2.75.8.3.3.1
Power of the radio after the change of power.
OBJECT-TYPE    
  Integer32  

hpnicfDot11OldPower 1.3.6.1.4.1.11.2.14.11.15.2.75.8.3.3.2
Power of the radio before the change of power.
OBJECT-TYPE    
  Integer32  

hpnicfDot11MonitorDetectedGroup 1.3.6.1.4.1.11.2.14.11.15.2.75.8.4
OBJECT IDENTIFIER    

hpnicfDot11MonitorDetectedDevTable 1.3.6.1.4.1.11.2.14.11.15.2.75.8.4.1
This table shows the devices of AP detected
OBJECT-TYPE    
  SEQUENCE OF  
    HpnicfDot11MonitorDetectedDevEntry

hpnicfDot11MonitorDetectedDevEntry 1.3.6.1.4.1.11.2.14.11.15.2.75.8.4.1.1
Each entry contains information of detected devices.
OBJECT-TYPE    
  HpnicfDot11MonitorDetectedDevEntry  

hpnicfDot11MonitorDevMAC 1.3.6.1.4.1.11.2.14.11.15.2.75.8.4.1.1.1
Represents MAC address of the device detected.
OBJECT-TYPE    
  MacAddress  

hpnicfDot11MonitorDevType 1.3.6.1.4.1.11.2.14.11.15.2.75.8.4.1.1.2
Represents type of the device detected.
OBJECT-TYPE    
  INTEGER client(1), ap(2), adhoc(3), wirelessBridge(4), unknown(5)  

hpnicfDot11MonitorDevVendor 1.3.6.1.4.1.11.2.14.11.15.2.75.8.4.1.1.3
Represents vendor of the detected device.
OBJECT-TYPE    
  STRING  

hpnicfDot11MonitorDevSSID 1.3.6.1.4.1.11.2.14.11.15.2.75.8.4.1.1.4
Represents the service set identifier for the ESS of the device which type is ap or adhoc.
OBJECT-TYPE    
  STRING  

hpnicfDot11MonitorDevBSSID 1.3.6.1.4.1.11.2.14.11.15.2.75.8.4.1.1.5
Represents the basic service set identifier of the detected device.
OBJECT-TYPE    
  MacAddress  

hpnicfDot11MonitorDevChannel 1.3.6.1.4.1.11.2.14.11.15.2.75.8.4.1.1.6
Represents the channel in which the device was last detected. AP will choose the channel which has maximum signal strength as effective channel, as there is interference between adjacent channels.
OBJECT-TYPE    
  HpnicfDot11ChannelScopeType  

hpnicfDot11MonitorRadioId 1.3.6.1.4.1.11.2.14.11.15.2.75.8.4.1.1.7
Represents the radio ID of the AP that detected the device.
OBJECT-TYPE    
  HpnicfDot11RadioScopeType  

hpnicfDot11MonitorDevMaxRSSI 1.3.6.1.4.1.11.2.14.11.15.2.75.8.4.1.1.8
Represents the maximum detected RSSI of the device in a scan report cycle.
OBJECT-TYPE    
  Integer32  

hpnicfDot11MonitorDevBeaconIntvl 1.3.6.1.4.1.11.2.14.11.15.2.75.8.4.1.1.9
Represents the beacon interval for the detected device(not include the device which type is client).
OBJECT-TYPE    
  Integer32  

hpnicfDot11MonitorDevFstDctTime 1.3.6.1.4.1.11.2.14.11.15.2.75.8.4.1.1.10
Represents the time at which the device was first detected.
OBJECT-TYPE    
  DateAndTime  

hpnicfDot11MonitorDevLstDctTime 1.3.6.1.4.1.11.2.14.11.15.2.75.8.4.1.1.11
Represents the time at which the device was detected last time.
OBJECT-TYPE    
  DateAndTime  

hpnicfDot11MonitorDevClear 1.3.6.1.4.1.11.2.14.11.15.2.75.8.4.1.1.12
This object is used to clear the information of the device detected in the WLAN. It will return false for get operation.
OBJECT-TYPE    
  TruthValue  

hpnicfDot11MonitorDevSNR 1.3.6.1.4.1.11.2.14.11.15.2.75.8.4.1.1.13
Represents the SNR of the device in a scan report cycle.
OBJECT-TYPE    
  Integer32