HM2-POE-MIB

File: HM2-POE-MIB.mib (18768 bytes)

Imported modules

SNMPv2-SMI SNMP-FRAMEWORK-MIB HM2-DEVMGMT-MIB
HM2-TC-MIB

Imported symbols

MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE
Integer32 SnmpAdminString hm2IfacePhysIndex
HmEnabledStatus HmTimeHHMM24 hm2ConfigurationMibs

Defined Types

Hm2PoeMgmtPsuEntry  
SEQUENCE    
  hm2PoeMgmtPsuPower Integer32
  hm2PoeMgmtPsuReservedPower Integer32
  hm2PoeMgmtPsuDeliveredPower Integer32

Hm2PoeMgmtPortEntry  
SEQUENCE    
  hm2PoeMgmtPortAdminEnable HmEnabledStatus
  hm2PoeMgmtPortConsumptionPower Integer32
  hm2PoeMgmtPortDetectionStatus INTEGER
  hm2PoeMgmtPortPowerPriority INTEGER
  hm2PoeMgmtPortPowerClassification INTEGER
  hm2PoeMgmtPortName SnmpAdminString
  hm2PoeMgmtPortAllowedClassBits BITS
  hm2PoeMgmtPortAutoShutdown HmEnabledStatus
  hm2PoeMgmtPortAutoShutdownTimeStart HmTimeHHMM24
  hm2PoeMgmtPortAutoShutdownTimeEnd HmTimeHHMM24
  hm2PoeMgmtPortClassValid INTEGER
  hm2PoeMgmtPortFastStartup HmEnabledStatus
  hm2PoeMgmtPortMaxConsumptionPower Integer32
  hm2PoeMgmtPortPowerLimit Integer32

Hm2PoeMgmtModuleEntry  
SEQUENCE    
  hm2PoeMgmtModuleUnitIndex Integer32
  hm2PoeMgmtModuleSlotIndex Integer32
  hm2PoeMgmtModulePower Integer32
  hm2PoeMgmtModuleMaximumPower Integer32
  hm2PoeMgmtModuleReservedPower Integer32
  hm2PoeMgmtModuleDeliveredPower Integer32
  hm2PoeMgmtModulePowerSource INTEGER
  hm2PoeMgmtModuleUsageThreshold Integer32
  hm2PoeMgmtModuleNotificationControlEnable HmEnabledStatus

Defined Values

hm2PoeMgmtMib 1.3.6.1.4.1.248.11.12
Hirschmann Power over Ethernet Management MIB. This MIB contains the private extensions to the RFC 3621. Copyright (C) 2011. All Rights Reserved.
MODULE-IDENTITY    

hm2PoeMgmtMibNotifications 1.3.6.1.4.1.248.11.12.0
OBJECT IDENTIFIER    

hm2PoeMgmtMibObjects 1.3.6.1.4.1.248.11.12.1
OBJECT IDENTIFIER    

hm2PoeMgmtGroup 1.3.6.1.4.1.248.11.12.1.1
OBJECT IDENTIFIER    

hm2PoeMgmtGlobalGroup 1.3.6.1.4.1.248.11.12.1.1.1
OBJECT IDENTIFIER    

hm2PoeMgmtAdminStatus 1.3.6.1.4.1.248.11.12.1.1.1.1
Enables/disables Power over Ethernet management on this device.
Status: current Access: read-write
OBJECT-TYPE    
  HmEnabledStatus  

hm2PoeMgmtReservedPower 1.3.6.1.4.1.248.11.12.1.1.1.2
Reserved system power for active Power over Ethernet ports in Watts.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hm2PoeMgmtPsuTable 1.3.6.1.4.1.248.11.12.1.1.2
This table contains objects for each power supply type of the device (internal or external power supply).
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Hm2PoeMgmtPsuEntry

hm2PoeMgmtPsuEntry 1.3.6.1.4.1.248.11.12.1.1.2.1
The entries of the hm2PoeMgmtPsuTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  Hm2PoeMgmtPsuEntry  

hm2PoeMgmtPsuPower 1.3.6.1.4.1.248.11.12.1.1.2.1.1
The power budget per psu type expressed in Watts. Psu types could be internal or external.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hm2PoeMgmtPsuReservedPower 1.3.6.1.4.1.248.11.12.1.1.2.1.2
The reserved power (depending on actual power classes) per psu type expressed in Watts.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hm2PoeMgmtPsuDeliveredPower 1.3.6.1.4.1.248.11.12.1.1.2.1.3
The measured usage power per psu type expressed in Watts.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hm2PoeMgmtPortTable 1.3.6.1.4.1.248.11.12.1.1.3
This table contains objects for each Power over Ethernet interface of the device.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Hm2PoeMgmtPortEntry

hm2PoeMgmtPortEntry 1.3.6.1.4.1.248.11.12.1.1.3.1
The entry of the hm2PoeMgmtPortTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  Hm2PoeMgmtPortEntry  

hm2PoeMgmtPortAdminEnable 1.3.6.1.4.1.248.11.12.1.1.3.1.1
enable (1) An interface which can provide the PSE functions. disable(2) The interface will act - as it would - if it had no PSE function.
Status: current Access: read-write
OBJECT-TYPE    
  HmEnabledStatus  

hm2PoeMgmtPortConsumptionPower 1.3.6.1.4.1.248.11.12.1.1.3.1.2
Measured usage power per interface expressed in Milliwatts.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hm2PoeMgmtPortDetectionStatus 1.3.6.1.4.1.248.11.12.1.1.3.1.3
Describes the operational status of the port PD detection. A value of disabled(1)- indicates that the PSE State diagram is in the state DISABLED. A value of deliveringPower(3) - indicates that the PSE State diagram is in the state POWER_ON. A value of fault(4) - indicates that the PSE State diagram is in the state TEST_ERROR. A value of test(5) - indicates that the PSE State diagram is in the state TEST_MODE. A value of otherFault(6) - indicates that the PSE State diagram is in the state IDLE due to the variable error_conditions. A value of searching(2)- indicates the PSE State diagram is in a state other than those listed above.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER disabled(1), searching(2), deliveringPower(3), fault(4), test(5), otherFault(6)  

hm2PoeMgmtPortPowerPriority 1.3.6.1.4.1.248.11.12.1.1.3.1.4
This object controls the priority of the port from the point of view of a power management algorithm. The priority that is set by this variable could be used by a control mechanism that prevents over current situations by disconnecting first ports with lower power priority. Ports that connect devices critical to the operation of the network - like the E911 telephones ports - should be set to higher priority.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER critical(1), high(2), low(3)  

hm2PoeMgmtPortPowerClassification 1.3.6.1.4.1.248.11.12.1.1.3.1.5
Classification is a way to tag different terminals on the Power over LAN network according to their power consumption. Devices such as IP telephones, WLAN access points and others, will be classified according to their power requirements. The meaning of the classification labels is defined in the IEEE specification. This variable is valid only while a PD is being powered, that is, while the attribute hm2PoeMgmtPortDetectionStatus is reporting the enumeration deliveringPower.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER class0(1), class1(2), class2(3), class3(4), class4(5)  

hm2PoeMgmtPortName 1.3.6.1.4.1.248.11.12.1.1.3.1.6
A manager will set the value of this variable to indicate the type of powered device that is connected to the port. The default value supplied by the agent if no value has ever been set should be a zero-length octet string.
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(1..32)  

hm2PoeMgmtPortAllowedClassBits 1.2.3.4.5.1.3.6.1.4.1.248.11.12.1.1.3.1.7
Bit mask which defines allowed classes per interface.
Status: current Access: read-write
OBJECT-TYPE    
  BITS class0(0), class1(1), class2(2), class3(3), class4(4)  

hm2PoeMgmtPortAutoShutdown 1.3.6.1.4.1.248.11.12.1.1.3.1.8
Enables/disables automatic shutdown functionality per interface.
Status: current Access: read-write
OBJECT-TYPE    
  HmEnabledStatus  

hm2PoeMgmtPortAutoShutdownTimeStart 1.3.6.1.4.1.248.11.12.1.1.3.1.9
Start time for the automatic shutdown functionality per interface.
Status: current Access: read-write
OBJECT-TYPE    
  HmTimeHHMM24  

hm2PoeMgmtPortAutoShutdownTimeEnd 1.3.6.1.4.1.248.11.12.1.1.3.1.10
End time for the automatic shutdown functionality per interface.
Status: current Access: read-write
OBJECT-TYPE    
  HmTimeHHMM24  

hm2PoeMgmtPortClassValid 1.3.6.1.4.1.248.11.12.1.1.3.1.11
Evaluates if class represented through pethPsePortPowerClassifications is valid or not. Class is valid if PD is delivered with power or in case of power exceeding through a connected device.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER invalid(0), valid(1)  

hm2PoeMgmtPortFastStartup 1.3.6.1.4.1.248.11.12.1.1.3.1.12
Enables/disables Power over Ethernet fast startup mode on given port. The default value is 'disable'.
Status: current Access: read-write
OBJECT-TYPE    
  HmEnabledStatus  

hm2PoeMgmtPortMaxConsumptionPower 1.3.6.1.4.1.248.11.12.1.1.3.1.13
The maximum observed power consumption (hm2PoeMgmtPortMaxConsumptionPower) value expressed in milliwatts used by the PD. The value is reset to 0 if the PoE admin state is set to disable or if a disconnect of the PD is detected.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hm2PoeMgmtPortPowerLimit 1.3.6.1.4.1.248.11.12.1.1.3.1.14
The power limit per port expressed in milliwatts. If set to zero the power consumption limitation is disabled.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..30000  

hm2PoeMgmtModuleTable 1.3.6.1.4.1.248.11.12.1.1.4
This table contains objects for each plugged PoE module of the device. If the device is non-modular and supports PoE it contains only one entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Hm2PoeMgmtModuleEntry

hm2PoeMgmtModuleEntry 1.3.6.1.4.1.248.11.12.1.1.4.1
The entries of the hm2PoeMgmtModuleTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  Hm2PoeMgmtModuleEntry  

hm2PoeMgmtModuleUnitIndex 1.3.6.1.4.1.248.11.12.1.1.4.1.1
Unit number - for stacking devices.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

hm2PoeMgmtModuleSlotIndex 1.3.6.1.4.1.248.11.12.1.1.4.1.2
Slot number of the plugged PoE module.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

hm2PoeMgmtModulePower 1.3.6.1.4.1.248.11.12.1.1.4.1.3
Configurable power budget per module expressed in Watts. The default value is hm2PoeMgmtModuleMaximumPower and depends on the hardware.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..1000  

hm2PoeMgmtModuleMaximumPower 1.3.6.1.4.1.248.11.12.1.1.4.1.4
Maximum available power budget per module expressed in Watts. This value depends on the device or module.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..1000  

hm2PoeMgmtModuleReservedPower 1.3.6.1.4.1.248.11.12.1.1.4.1.5
The reserved power (depending on actual power classes) per module expressed in Watts.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hm2PoeMgmtModuleDeliveredPower 1.3.6.1.4.1.248.11.12.1.1.4.1.6
The measured usage power per module expressed in Watts.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hm2PoeMgmtModulePowerSource 1.3.6.1.4.1.248.11.12.1.1.4.1.7
This object displays the type of the PoE power source. internal (0) means that the PoE power is used from the internal PSU and external (1) means that a external PoE PSU must be installed and connected to this module.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER internal(0), external(1)  

hm2PoeMgmtModuleUsageThreshold 1.3.6.1.4.1.248.11.12.1.1.4.1.8
The usage power threshold per module expressed in percent. If this threshold is exceeded a alarm is initiated.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..99  

hm2PoeMgmtModuleNotificationControlEnable 1.3.6.1.4.1.248.11.12.1.1.4.1.9
This object controls, on a per-module basis, whether or not notifications from the agent are enabled.
Status: current Access: read-write
OBJECT-TYPE    
  HmEnabledStatus  

hm2PoeMgmtModulePowerUsageOnNotification 1.3.6.1.4.1.248.11.12.0.1
This Notification indicate PSE Threshold usage indication is on, the usage power is above the threshold. At least 500 msec must elapse between notifications being emitted by the same object instance.
Status: current Access: read-write
NOTIFICATION-TYPE    

hm2PoeMgmtModulePowerUsageOffNotification 1.3.6.1.4.1.248.11.12.0.2
This Notification indicate PSE Threshold usage indication is on, the usage power is below the threshold. At least 500 msec must elapse between notifications being emitted by the same object instance.
Status: current Access: read-write
NOTIFICATION-TYPE    

hm2PoeMgmtPortMaxConfiguredPowerLimitExceeded 1.3.6.1.4.1.248.11.12.0.3
This trap reports an exceeding of the configured power limit. This notification indicates that a PD consumes more power that the maximum configured on the port and the system reserved the maximum power required for the negotiated class.
Status: current Access: read-write
NOTIFICATION-TYPE    

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor