EXTREME-SUMMIT-WM-MIB
File:
EXTREME-SUMMIT-WM-MIB.mib (62341 bytes)
Imported modules
Imported symbols
Defined Types
LogEventSeverity |
|
The log event severities used in the access controller. |
TEXTUAL-CONVENTION |
|
|
|
|
INTEGER |
critical(1), major(2), minor(3), information(4), trace(5) |
|
SysLogServersEntry |
|
SEQUENCE |
|
|
|
|
sysLogServerIndex |
Integer32 |
|
|
sysLogServerEnabled |
TruthValue |
|
|
sysLogServerIP |
IpAddress |
|
|
sysLogServerPort |
Integer32 |
|
|
sysLogServerRowStatus |
RowStatus |
|
PhysicalPortsEntry |
|
SEQUENCE |
|
|
|
|
portMgmtTrafficEnable |
TruthValue |
|
|
portDuplexMode |
INTEGER |
|
|
portFunction |
INTEGER |
|
TunnelStatsEntry |
|
SEQUENCE |
|
|
|
|
tunnelStartIP |
IpAddress |
|
|
tunnelStartWM |
OCTET STRING |
|
|
tunnelEndIP |
IpAddress |
|
|
tunnelEndWM |
OCTET STRING |
|
|
tunnelStatus |
INTEGER |
|
WmadConfigEntry |
|
SEQUENCE |
|
|
|
|
wmadDescription |
DisplayString |
|
|
wmadAssignmentMode |
INTEGER |
|
|
wmadMUSessionTimeout |
Integer32 |
|
|
wmadAllowMulticast |
TruthValue |
|
|
wmadSSID |
DisplayString |
|
|
wmadDomain |
DisplayString |
|
|
wmadDNSServers |
DisplayString |
|
|
wmadWINSServers |
DisplayString |
|
|
wmadAuthModel |
INTEGER |
|
|
wmadParentIfIndex |
Integer32 |
|
|
wmadMgmtTrafficEnable |
TruthValue |
|
|
wmadUseDHCPRelay |
TruthValue |
|
|
wmad3rdPartyAP |
TruthValue |
|
|
wmadStatus |
RowStatus |
|
WmadDHCPRangeEntry |
|
SEQUENCE |
|
|
|
|
wmadDHCPRangeIndex |
Integer32 |
|
|
wmadDHCPRangeStart |
IpAddress |
|
|
wmadDHCPRangeEnd |
IpAddress |
|
|
wmadDHCPRangeType |
INTEGER |
|
|
wmadDHCPRangeStatus |
RowStatus |
|
WmadRadiusServerEntry |
|
SEQUENCE |
|
|
|
|
wmadRadiusServerIP |
IpAddress |
|
|
wmadRadiusServerPort |
Integer32 |
|
|
wmadRadiusServerRetries |
Integer32 |
|
|
wmadRadiusServerTimeout |
Integer32 |
|
|
wmadRadiusServerSharedSecret |
DisplayString |
|
|
wmadRadiusServerNASIdentifier |
DisplayString |
|
|
wmadRadiusServerAuthType |
INTEGER |
|
|
wmadRadiusServerRowStatus |
RowStatus |
|
WmadFilterIDEntry |
|
SEQUENCE |
|
|
|
|
wmadFilterID |
DisplayString |
|
|
wmadFilterIDStatus |
RowStatus |
|
WmadFilterRuleEntry |
|
SEQUENCE |
|
|
|
|
wmadFilterRuleOrder |
Integer32 |
|
|
wmadFilterRuleDirection |
INTEGER |
|
|
wmadFilterRuleAction |
INTEGER |
|
|
wmadFilterRuleIPAddress |
IpAddress |
|
|
wmadFilterRulePortLow |
Integer32 |
|
|
wmadFilterRulePortHigh |
Integer32 |
|
|
wmadFilterRuleProtocol |
INTEGER |
|
|
wmadFilterRuleEtherType |
INTEGER |
|
|
wmadFilterRuleStatus |
RowStatus |
|
WmadPrivacyEntry |
|
SEQUENCE |
|
|
|
|
wmadPrivWEPKeyType |
INTEGER |
|
|
wmadPrivDynamicRekeyFrequency |
Integer32 |
|
|
wmadPrivWEPKeyLength |
Integer32 |
|
|
wmadPrivWPA1Enabled |
TruthValue |
|
|
wmadPrivUseSharedKey |
TruthValue |
|
|
wmadPrivWPASharedKey |
DisplayString |
|
|
wmadPrivWPA2Enabled |
TruthValue |
|
WmadWEPKeyEntry |
|
SEQUENCE |
|
|
|
|
wmadWEPKeyIndex |
Integer32 |
|
|
wmadWEPKeyValue |
WEPKeytype |
|
AltitudeEntry |
|
SEQUENCE |
|
|
|
|
altitudeIndex |
Integer32 |
|
|
altitudeName |
DisplayString |
|
|
altitudeDesc |
DisplayString |
|
|
altitudeSerialNumber |
OCTET STRING |
|
|
altitudePortifIndex |
InterfaceIndex |
|
|
altitudeWiredIfIndex |
InterfaceIndex |
|
|
altitudeSoftwareVersion |
OCTET STRING |
|
|
altitudeSpecific |
OBJECT IDENTIFIER |
|
|
altitudeBroadcastDisassociate |
TruthValue |
|
|
altitudeRowStatus |
RowStatus |
|
AltitudeRadioEntry |
|
SEQUENCE |
|
|
|
|
altitudeRadioFrequency |
INTEGER |
|
RadioWMADEntry |
|
SEQUENCE |
|
|
|
|
radioIfIndex |
InterfaceIndex |
|
|
wmadIfIndex |
InterfaceIndex |
|
|
radioWMADRowStatus |
RowStatus |
|
AltitudeStatsEntry |
|
SEQUENCE |
|
|
|
|
altitudeInUcastPkts |
Counter64 |
|
|
altitudeInNUcastPkts |
Counter64 |
|
|
altitudeInOctets |
Counter64 |
|
|
altitudeInErrors |
Counter64 |
|
|
altitudeInDiscards |
Counter64 |
|
|
altitudeOutUcastPkts |
Counter64 |
|
|
altitudeOutNUcastPkts |
Counter64 |
|
|
altitudeOutOctets |
Counter64 |
|
|
altitudeOutErrors |
Counter64 |
|
|
altitudeOutDiscards |
Counter64 |
|
|
altitudeUpTime |
TimeTicks |
|
MuEntry |
|
SEQUENCE |
|
|
|
|
muMACAddress |
MacAddress |
|
|
muIPAddress |
IpAddress |
|
|
muUser |
OCTET STRING |
|
|
muState |
TruthValue |
|
|
muAltitudeSerialNo |
OCTET STRING |
|
|
muWmadSSID |
OCTET STRING |
|
|
muTxPackets |
Counter64 |
|
|
muRxPackets |
Counter64 |
|
|
muTxOctets |
Counter64 |
|
|
muRxOctets |
Counter64 |
|
|
muDuration |
Counter64 |
|
AssocEntry |
|
SEQUENCE |
|
|
|
|
assocMUMacAddress |
MacAddress |
|
|
assocStartSysUpTime |
TimeTicks |
|
|
assocTxPackets |
Counter64 |
|
|
assocRxPackets |
Counter64 |
|
|
assocTxOctets |
Counter64 |
|
|
assocRxOctets |
Counter64 |
|
|
assocDuration |
Integer32 |
|
|
assocWmadIfIndex |
InterfaceIndex |
|
Defined Values
summitWMMIB |
1.3.6.1.4.1.1916.5.5.2 |
Summit WM MIB definition |
MODULE-IDENTITY |
|
|
|
summitWM |
1.3.6.1.4.1.1916.5.3.2 |
OBJECT IDENTIFIER |
|
|
|
sysLogLevel |
1.3.6.1.4.1.1916.5.3.2.1.2 |
Sets the level of events which are written to the system
log. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
LogEventSeverity |
|
|
sysSerialNo |
1.3.6.1.4.1.1916.5.3.2.1.3 |
System serial number. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..64) |
|
summitWMAppLogFacility |
1.3.6.1.4.1.1916.5.3.2.1.4.1 |
The application log facility level for syslog. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
local0(0), local1(1), local2(2), local3(3), local4(4), local5(5), local6(6) |
|
serviceLogFacility |
1.3.6.1.4.1.1916.5.3.2.1.4.2 |
The service log facility level for syslog. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
local0(0), local1(1), local2(2), local3(3), local4(4), local5(5), local6(6) |
|
includeAllServiceMessages |
1.3.6.1.4.1.1916.5.3.2.1.4.3 |
Indicates if DHCP messages should also be forwarded to syslog. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
TruthValue |
|
|
sysLogServersTable |
1.3.6.1.4.1.1916.5.3.2.1.4.4 |
Table of syslog servers to forward logging messages. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
SysLogServersEntry |
|
sysLogServersEntry |
1.3.6.1.4.1.1916.5.3.2.1.4.4.1 |
Configuration information for an external syslog server. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SysLogServersEntry |
|
|
sysLogServerIndex |
1.3.6.1.4.1.1916.5.3.2.1.4.4.1.1 |
Table index for the syslog server. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
1..2147483647 |
|
sysLogServerEnabled |
1.3.6.1.4.1.1916.5.3.2.1.4.4.1.2 |
Indicates if messages are to be sent to the syslog server. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
TruthValue |
|
|
sysLogServerIP |
1.3.6.1.4.1.1916.5.3.2.1.4.4.1.3 |
syslog server IP address. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
sysLogServerPort |
1.3.6.1.4.1.1916.5.3.2.1.4.4.1.4 |
syslog server port number. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
sysLogServerRowStatus |
1.3.6.1.4.1.1916.5.3.2.1.4.4.1.5 |
RowStatus for operating on syslogServersTable. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
RowStatus |
|
|
mgmtPortIfIndex |
1.3.6.1.4.1.1916.5.3.2.3.1 |
ifIndex of the management port. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
mgmtPortPrimaryDNS |
1.3.6.1.4.1.1916.5.3.2.3.3 |
Primary domain server for the management port. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
mgmtPortSecondaryDNS |
1.3.6.1.4.1.1916.5.3.2.3.4 |
Secondary domain server for the management port. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
mgmtPortDomain |
1.3.6.1.4.1.1916.5.3.2.3.5 |
Domain of the management port. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
physicalPortCount |
1.3.6.1.4.1.1916.5.3.2.4.1 |
Number of rows in routerPortsTable. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
physicalPortsEntry |
1.3.6.1.4.1.1916.5.3.2.4.2.1 |
An entry in routerPortsTable. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
PhysicalPortsEntry |
|
|
portMgmtTrafficEnable |
1.3.6.1.4.1.1916.5.3.2.4.2.1.1 |
Determines whether controller management
network traffic is allowed over this interface. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
TruthValue |
|
|
portDuplexMode |
1.3.6.1.4.1.1916.5.3.2.4.2.1.2 |
Duplex mode for the esa ports. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
full(1), half(2), auto(3) |
|
portFunction |
1.3.6.1.4.1.1916.5.3.2.4.2.1.3 |
Specifies the behavior of the WM physical ports. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
router(1), host(2), thirdPartyAP(3) |
|
adRole |
1.3.6.1.4.1.1916.5.3.2.5.1 |
Specifies the role of this WM in inter-WM mobility.
None indicates that mobile units cannot roam to or
from this WM. In any WM cluster, only one WM should
be specified as adMgr, all others should be have
adRole = adAgent . |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
none(1), adMgr(2), adAgent(3) |
|
adIfIndex |
1.3.6.1.4.1.1916.5.3.2.5.2 |
ifIndex of the physical port where inter-WM tunnels terminate. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
adHeartBeatInterval |
1.3.6.1.4.1.1916.5.3.2.5.3 |
The time interval between inter-WM polling messages. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
ntpObjects |
1.3.6.1.4.1.1916.5.3.2.6 |
OBJECT IDENTIFIER |
|
|
|
ntpEnabled |
1.3.6.1.4.1.1916.5.3.2.6.1 |
Enable or disables support for the Network Time Protocol (NTP). |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
TruthValue |
|
|
ntpTimezone |
1.3.6.1.4.1.1916.5.3.2.6.2 |
Specifies the time zone where this WM resides. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
tunnelCount |
1.3.6.1.4.1.1916.5.3.2.7.6 |
Number of connections to other summitWM controllers. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
tunnelStatsTable |
1.3.6.1.4.1.1916.5.3.2.7.7 |
tunnelStatsTable contains a list of the IP tunnels connected
to this WM for use in inter-WM mobility. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
TunnelStatsEntry |
|
tunnelStatsEntry |
1.3.6.1.4.1.1916.5.3.2.7.7.1 |
Statistics for a mobility tunnel. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
TunnelStatsEntry |
|
|
tunnelStartIP |
1.3.6.1.4.1.1916.5.3.2.7.7.1.1 |
IP address for the start of the tunnel. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
tunnelStartWM |
1.3.6.1.4.1.1916.5.3.2.7.7.1.2 |
Name of the access controller for the start of the tunnel. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
tunnelEndIP |
1.3.6.1.4.1.1916.5.3.2.7.7.1.3 |
IP address for the end of the tunnel. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
tunnelEndWM |
1.3.6.1.4.1.1916.5.3.2.7.7.1.4 |
Name of the access controller for the end of the tunnel. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
tunnelStatus |
1.3.6.1.4.1.1916.5.3.2.7.7.1.5 |
Indicates if the mobility tunnel is up or down. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
disconnected(1), connected(2) |
|
accessDomains |
1.3.6.1.4.1.1916.5.3.3 |
OBJECT IDENTIFIER |
|
|
|
wmadCount |
1.3.6.1.4.1.1916.5.3.3.1.1 |
Number of WMADs defined in wmadConfigTable. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
wmadConfigTable |
1.3.6.1.4.1.1916.5.3.3.1.2 |
Contains definitions of the Access Domain Segments
defined on this SummitWM. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
WmadConfigEntry |
|
wmadConfigEntry |
1.3.6.1.4.1.1916.5.3.3.1.2.1 |
Configuration elements for a specific Access Domain Segment. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
WmadConfigEntry |
|
|
wmadDescription |
1.3.6.1.4.1.1916.5.3.3.1.2.1.1 |
Textual description of the WMAD. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
wmadAssignmentMode |
1.3.6.1.4.1.1916.5.3.3.1.2.1.2 |
Determines the method by which mobile units are assigned an
address within this WMAD. If wmadAssignmentMode = ssid, any
client with an SSID matching the WMAD will be assigned an
address from this WMAD. If wmadAssignmentMode == aaa, then
address assignment is not completed until after the user is
authenticated. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
ssid(1), aaa(2) |
|
wmadMUSessionTimeout |
1.3.6.1.4.1.1916.5.3.3.1.2.1.3 |
Client session idle time out, in seconds. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
wmadAllowMulticast |
1.3.6.1.4.1.1916.5.3.3.1.2.1.4 |
When true, allows IP multicast packets to be broadcast
to the clients on this WMAD. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
TruthValue |
|
|
wmadSSID |
1.3.6.1.4.1.1916.5.3.3.1.2.1.5 |
Service Set Identifier (i.e. Network Name) that will be
configured on the Altitudes associated with this WMAD. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
wmadDomain |
1.3.6.1.4.1.1916.5.3.3.1.2.1.6 |
Domain name to be supplied to the wireless clients if internal DHCP address assignment. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
wmadDNSServers |
1.3.6.1.4.1.1916.5.3.3.1.2.1.7 |
List of DNSs to be supplied to the wireless clients if internal DHCP address assignment. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
wmadWINSServers |
1.3.6.1.4.1.1916.5.3.3.1.2.1.8 |
List of WINSs to be supplied to the wireless clients if internal DHCP address assignment. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
wmadAuthModel |
1.3.6.1.4.1.1916.5.3.3.1.2.1.9 |
wmadAuthModel specifies the authentication method used
for clients in the WMAD. None indicates that the WMAD is
open, and no authentication is required.
wmadAuthModel=captivePortal may only be specified for
a WMAD with wmadAssignmentMode=ssid. Likewise,
wmadAuthModel=dot1X may only be specified for a WMAD with
wmadAssignmentMode=aaa. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
none(1), captivePortal(2), dot1X(3) |
|
wmadParentIfIndex |
1.3.6.1.4.1.1916.5.3.3.1.2.1.10 |
Specifies the ifIndex of the parent WMAD, if this WMAD
is a child. This only applies for a WMAD where
wmadAssignmentMode=aaa.
If this is a top level WMAD, wmadParentIfIndex will return
null or 0. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
wmadMgmtTrafficEnable |
1.3.6.1.4.1.1916.5.3.3.1.2.1.11 |
Specifies whether clients in the WMAD have access
to WM management elements. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
TruthValue |
|
|
wmadUseDHCPRelay |
1.3.6.1.4.1.1916.5.3.3.1.2.1.12 |
When true, specifies that DHCP Relay is enabled on the WMAD. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
TruthValue |
|
|
wmad3rdPartyAP |
1.3.6.1.4.1.1916.5.3.3.1.2.1.13 |
When true, specifies that the WMAD contains 3rd party
access points. Only one such WMAD may be defined for
a summitWM. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
TruthValue |
|
|
wmadStatus |
1.3.6.1.4.1.1916.5.3.3.1.2.1.14 |
RowStatus variable for performing row operations on
wmadConfigTable. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
RowStatus |
|
|
wmadDHCPRangeTable |
1.3.6.1.4.1.1916.5.3.3.1.3 |
wmadDHCPRangeTable contains the IP address ranges that DHCP
will serve to clients associated with this WMAD. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
WmadDHCPRangeEntry |
|
wmadDHCPRangeEntry |
1.3.6.1.4.1.1916.5.3.3.1.3.1 |
Configuration information for a DHCP range. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
WmadDHCPRangeEntry |
|
|
wmadDHCPRangeIndex |
1.3.6.1.4.1.1916.5.3.3.1.3.1.1 |
Index for the DHCP row element. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
1..2147483647 |
|
wmadDHCPRangeStart |
1.3.6.1.4.1.1916.5.3.3.1.3.1.2 |
First IP address in the range. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
wmadDHCPRangeEnd |
1.3.6.1.4.1.1916.5.3.3.1.3.1.3 |
Last IP address in the range. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
wmadDHCPRangeType |
1.3.6.1.4.1.1916.5.3.3.1.3.1.4 |
Determines whether addresses in the specified range will
be included, or excluded by the DHCP server. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
inclusion(1), exclusion(2) |
|
wmadDHCPRangeStatus |
1.3.6.1.4.1.1916.5.3.3.1.3.1.5 |
Row status variable for row operations on the wmadDHCPRangeTable |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
RowStatus |
|
|
wmadCaptivePortalTable |
1.3.6.1.4.1.1916.5.3.3.1.4 |
Details of the Captive Portal login page for
WMADs that have wmadAssignment=ssid and
wmadAuthModel=captivePortal. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
WmadCaptivePortalEntry |
|
wmadCaptivePortalEntry |
1.3.6.1.4.1.1916.5.3.3.1.4.1 |
Captive Portal Information for the WMAD. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
WmadCaptivePortalEntry |
|
|
cpURL |
1.3.6.1.4.1.1916.5.3.3.1.4.1.1 |
Redirect URL of the Captive Portal login page. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
cpLoginLabel |
1.3.6.1.4.1.1916.5.3.3.1.4.1.2 |
Label that appears in front of the login field
on the Captive Portal login page. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
cpPasswordLabel |
1.3.6.1.4.1.1916.5.3.3.1.4.1.3 |
Label that appears in front of the password field
on the Captive Portal login page. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
cpMessage |
1.3.6.1.4.1.1916.5.3.3.1.4.1.6 |
A welcome message, or set of instructions that is to
appear on the Captive Portal login page. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
wmadRadiusServerEntry |
1.3.6.1.4.1.1916.5.3.3.1.5.1 |
Configuration information for a RADIUS server. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
WmadRadiusServerEntry |
|
|
wmadRadiusServerIP |
1.3.6.1.4.1.1916.5.3.3.1.5.1.1 |
IP address of the RADIUS server. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
wmadRadiusServerRetries |
1.3.6.1.4.1.1916.5.3.3.1.5.1.3 |
Number of retries for a RADIUS authentication request. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
wmadRadiusServerAuthType |
1.3.6.1.4.1.1916.5.3.3.1.5.1.7 |
Challenge mechanism for the request. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
pap(0), chap(1), msChap(2), msChapV2(3), notApplicable(4) |
|
wmadFilterIDEntry |
1.3.6.1.4.1.1916.5.3.3.1.6.1 |
Name of a specific filter in the WMAD. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
WmadFilterIDEntry |
|
|
wmadFilterIDStatus |
1.3.6.1.4.1.1916.5.3.3.1.6.1.2 |
RowStatus for operating on wmadFilterIDTable. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
RowStatus |
|
|
wmadFilterRuleEntry |
1.3.6.1.4.1.1916.5.3.3.1.7.1 |
Filter elements for an individual WMAD filter. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
WmadFilterRuleEntry |
|
|
wmadFilterRuleOrder |
1.3.6.1.4.1.1916.5.3.3.1.7.1.1 |
Position of the filter in the filter list. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
1..65532 |
|
wmadFilterRuleDirection |
1.3.6.1.4.1.1916.5.3.3.1.7.1.2 |
Traffic direction to apply the rule. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
in(1), out(2), both(3) |
|
wmadFilterRuleAction |
1.3.6.1.4.1.1916.5.3.3.1.7.1.3 |
Allow or deny traffic for the filter. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
allow(1), disallow(2) |
|
wmadFilterRuleProtocol |
1.3.6.1.4.1.1916.5.3.3.1.7.1.7 |
Specific protocol to filter. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
notApplicable(1), tcp(2) |
|
wmadFilterRuleEtherType |
1.3.6.1.4.1.1916.5.3.3.1.7.1.8 |
Specific ethertype to filter. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
ip(1), arp(2), rarp(3) |
|
wmadFilterRuleStatus |
1.3.6.1.4.1.1916.5.3.3.1.7.1.9 |
RowStatus value for the wmadFilterRuleTable. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
RowStatus |
|
|
wmadPrivacyTable |
1.3.6.1.4.1.1916.5.3.3.1.8 |
Table of privacy settings for the WMAD. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
WmadPrivacyEntry |
|
wmadPrivacyEntry |
1.3.6.1.4.1.1916.5.3.3.1.8.1 |
Configuration values for a specific privacy setting. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
WmadPrivacyEntry |
|
|
wmadPrivWEPKeyType |
1.3.6.1.4.1.1916.5.3.3.1.8.1.1 |
Type of key in use.
none(1) = not cofigured,
wepstatic(2) = static WEP,
wpapsk(3) = WPA Pre-Shared Key,
dynamic(4) = dynamically assigned,
wpa(5) = WPA. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
none(1), wepstatic(2), wpapsk(3), dynamic(4), wpa(5) |
|
wmadPrivDynamicRekeyFrequency |
1.3.6.1.4.1.1916.5.3.3.1.8.1.2 |
Dynamic WEP re-keying frequency, in seconds. Setting this
value to 0 disables rekeying.
This value is only meaningful if wmadPrivWEPKeyType == dynamic.
For any other values of wmadPrivWEPKeyType, reading or setting
this value will return an unsuccessful status and will return
a value of null or zero. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
wmadPrivWEPKeyLength |
1.3.6.1.4.1.1916.5.3.3.1.8.1.3 |
WEP key length, either 40 or 104 bit. If wmadPrivWEPKeyType
is none, reading or setting this value will return an
unsuccessful status and will return a value of null or zero. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
wmadPrivWPA1Enabled |
1.3.6.1.4.1.1916.5.3.3.1.8.1.4 |
Enables WPA.1 (Wi-Fi Protected Access). |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
TruthValue |
|
|
wmadPrivUseSharedKey |
1.3.6.1.4.1.1916.5.3.3.1.8.1.5 |
Enables the use of WPA shared key for this WMAD. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
TruthValue |
|
|
wmadPrivWPASharedKey |
1.3.6.1.4.1.1916.5.3.3.1.8.1.6 |
The value of the WPA shared key for this WMAD.
This value is logically WRITE ONLY. Attempts
to read this value shall return unsuccessful
status and values of null or zero. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
wmadPrivWPA2Enabled |
1.3.6.1.4.1.1916.5.3.3.1.8.1.7 |
When true, WPA v.2 support is enabled. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
TruthValue |
|
|
wmadWEPKeyTable |
1.3.6.1.4.1.1916.5.3.3.1.9 |
Table of WEP key entries for a static WEP definition. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
WmadWEPKeyEntry |
|
wmadWEPKeyEntry |
1.3.6.1.4.1.1916.5.3.3.1.9.1 |
WEP key for a single entry in the table. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
WmadWEPKeyEntry |
|
|
wmadWEPKeyIndex |
1.3.6.1.4.1.1916.5.3.3.1.9.1.1 |
Table index for the WEP key. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
1..4 |
|
wmadWEPKeyValue |
1.3.6.1.4.1.1916.5.3.3.1.9.1.2 |
Value of a WEP key for this WMAD.
This value is logically WRITE ONLY. Attempts
to read this value shall return unsuccessful
status and values of null or zero. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
WEPKeytype |
|
|
wmad3rdPartyAPEntry |
1.3.6.1.4.1.1916.5.3.3.1.10.1 |
Configuration information for a 3rd party access point. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
Wmad3rdPartyAPEntry |
|
|
apMacAddress |
1.3.6.1.4.1.1916.5.3.3.1.10.1.1 |
Ethernet MAC address of the 3rd party access point. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
MacAddress |
|
|
apIpAddress |
1.3.6.1.4.1.1916.5.3.3.1.10.1.2 |
IP address of the 3rd party access point. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
altitude |
1.3.6.1.4.1.1916.5.3.5 |
OBJECT IDENTIFIER |
|
|
|
altitudeCount |
1.3.6.1.4.1.1916.5.3.5.1.1 |
The count of currently configured Altitudes associated with this summitWM. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
altitudeTable |
1.3.6.1.4.1.1916.5.3.5.1.2 |
Contains a list of all configured Altitudes associated with the summitWM. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
AltitudeEntry |
|
altitudeEntry |
1.3.6.1.4.1.1916.5.3.5.1.2.1 |
Configuration information for an access point. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
AltitudeEntry |
|
|
altitudeIndex |
1.3.6.1.4.1.1916.5.3.5.1.2.1.1 |
Table index for the access point. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
1..2147483647 |
|
altitudeDesc |
1.3.6.1.4.1.1916.5.3.5.1.2.1.3 |
Text description of the Altitude. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
altitudeSerialNumber |
1.3.6.1.4.1.1916.5.3.5.1.2.1.4 |
16-character serial number of the Altitude. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(16) |
|
altitudePortifIndex |
1.3.6.1.4.1.1916.5.3.5.1.2.1.5 |
ifIndex of the physical port to which this Altitude is assigned. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
InterfaceIndex |
|
|
altitudeSoftwareVersion |
1.3.6.1.4.1.1916.5.3.5.1.2.1.7 |
Software version currently installed on the Altitude. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
altitudeSpecific |
1.3.6.1.4.1.1916.5.3.5.1.2.1.8 |
A link back to the OID under the summitWMProducts
branch that identifies the specific version of this Altitude. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OBJECT IDENTIFIER |
|
|
altitudeBroadcastDisassociate |
1.3.6.1.4.1.1916.5.3.5.1.2.1.9 |
True indicates that the Altitude should broadcast
disassociation requests, False indicates unicast. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
TruthValue |
|
|
altitudeRowStatus |
1.3.6.1.4.1.1916.5.3.5.1.2.1.10 |
RowStatus for the altitudeTable. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
RowStatus |
|
|
altitudeRadioEntry |
1.3.6.1.4.1.1916.5.3.5.1.3.1 |
Configuration information for a radio on the access point. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
AltitudeRadioEntry |
|
|
altitudeRadioFrequency |
1.3.6.1.4.1.1916.5.3.5.1.3.1.1 |
Indicates the type of radio (a or b/g). |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
freq50GHz(1), freq24GHz(2) |
|
radioWMADTable |
1.3.6.1.4.1.1916.5.3.5.1.4 |
Table of WMADs the radio is participating in. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
RadioWMADEntry |
|
radioWMADEntry |
1.3.6.1.4.1.1916.5.3.5.1.4.1 |
Information for a single WMAD entry. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
RadioWMADEntry |
|
|
radioIfIndex |
1.3.6.1.4.1.1916.5.3.5.1.4.1.1 |
Radio participating in the WMAD. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
InterfaceIndex |
|
|
wmadIfIndex |
1.3.6.1.4.1.1916.5.3.5.1.4.1.2 |
ifIndex for the WMAD the radio is participating. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
InterfaceIndex |
|
|
radioWMADRowStatus |
1.3.6.1.4.1.1916.5.3.5.1.4.1.3 |
RowStatus for the radioWMADTable. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
RowStatus |
|
|
altitudeActiveCount |
1.3.6.1.4.1.1916.5.3.5.2.1 |
The count of active Altitude associated with this summitWM. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
altitudeStatsEntry |
1.3.6.1.4.1.1916.5.3.5.2.2.1 |
Statistics for an access point. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
AltitudeStatsEntry |
|
|
altitudeInUcastPkts |
1.3.6.1.4.1.1916.5.3.5.2.2.1.1 |
Number of unicast packets from wireless-to-wired network. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter64 |
|
|
altitudeInNUcastPkts |
1.3.6.1.4.1.1916.5.3.5.2.2.1.2 |
Number of non-unicast packets from wireless-to-wired network. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter64 |
|
|
altitudeInOctets |
1.3.6.1.4.1.1916.5.3.5.2.2.1.3 |
Number of octets from wireless-to-wired network. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter64 |
|
|
altitudeInErrors |
1.3.6.1.4.1.1916.5.3.5.2.2.1.4 |
Number of error packets from wireless-to-wired network. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter64 |
|
|
altitudeInDiscards |
1.3.6.1.4.1.1916.5.3.5.2.2.1.5 |
Number of discarded packets from wireless-to-wired network. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter64 |
|
|
altitudeOutUcastPkts |
1.3.6.1.4.1.1916.5.3.5.2.2.1.6 |
Number of unicast packets from wired-to-wireless network. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter64 |
|
|
altitudeOutNUcastPkts |
1.3.6.1.4.1.1916.5.3.5.2.2.1.7 |
Number of non-unicast packets from wired-to-wireless network. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter64 |
|
|
altitudeOutOctets |
1.3.6.1.4.1.1916.5.3.5.2.2.1.8 |
Number of octets from wired-to-wireless network. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter64 |
|
|
altitudeOutErrors |
1.3.6.1.4.1.1916.5.3.5.2.2.1.9 |
Number of error packets from wired-to-wireless network. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter64 |
|
|
altitudeOutDiscards |
1.3.6.1.4.1.1916.5.3.5.2.2.1.10 |
Number of discarded packets from wired-to-wireless network. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter64 |
|
|
altitudeUpTime |
1.3.6.1.4.1.1916.5.3.5.2.2.1.11 |
Description. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
TimeTicks |
|
|
mobileUnitCount |
1.3.6.1.4.1.1916.5.3.6.1 |
Number of clients associated with the access point. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
muTable |
1.3.6.1.4.1.1916.5.3.6.2 |
Table of information for clients associated with the WM. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
MuEntry |
|
muEntry |
1.3.6.1.4.1.1916.5.3.6.2.1 |
Information for a client associated with the WM. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
MuEntry |
|
|
muMACAddress |
1.3.6.1.4.1.1916.5.3.6.2.1.1 |
Client MAC address. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
MacAddress |
|
|
muIPAddress |
1.3.6.1.4.1.1916.5.3.6.2.1.2 |
Client IP Address. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
muUser |
1.3.6.1.4.1.1916.5.3.6.2.1.3 |
Client login name. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
muState |
1.3.6.1.4.1.1916.5.3.6.2.1.4 |
True if the client is authenticated. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
TruthValue |
|
|
muAltitudeSerialNo |
1.3.6.1.4.1.1916.5.3.6.2.1.5 |
Serial Number of the Altitude the client is associated with. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
muWmadSSID |
1.3.6.1.4.1.1916.5.3.6.2.1.6 |
SSID of the WMAD the client is associated with. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
muTxPackets |
1.3.6.1.4.1.1916.5.3.6.2.1.7 |
Number of packets trasmitted to the client. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter64 |
|
|
muRxPackets |
1.3.6.1.4.1.1916.5.3.6.2.1.8 |
Number of packets received from the client. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter64 |
|
|
muTxOctets |
1.3.6.1.4.1.1916.5.3.6.2.1.9 |
Number of octets transmitted to the client. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter64 |
|
|
muRxOctets |
1.3.6.1.4.1.1916.5.3.6.2.1.10 |
Number of octets received from the client. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter64 |
|
|
muDuration |
1.3.6.1.4.1.1916.5.3.6.2.1.11 |
Time client has been associated with the WM. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter64 |
|
|
assocCount |
1.3.6.1.4.1.1916.5.3.7.1 |
Total number of current client associations to the access point. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
assocTable |
1.3.6.1.4.1.1916.5.3.7.2 |
Table of information about clients associated with the access point. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
AssocEntry |
|
assocEntry |
1.3.6.1.4.1.1916.5.3.7.2.1 |
Information for a single client in the association table. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
AssocEntry |
|
|
assocStartSysUpTime |
1.3.6.1.4.1.1916.5.3.7.2.1.2 |
How long the client has been associated to the access point. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
TimeTicks |
|
|
assocTxPackets |
1.3.6.1.4.1.1916.5.3.7.2.1.3 |
Nubmer of tx packets to the client. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter64 |
|
|
assocRxPackets |
1.3.6.1.4.1.1916.5.3.7.2.1.4 |
Number of received packets from the client. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter64 |
|
|
assocTxOctets |
1.3.6.1.4.1.1916.5.3.7.2.1.5 |
Number of octets sent to the client. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter64 |
|
|
assocRxOctets |
1.3.6.1.4.1.1916.5.3.7.2.1.6 |
Number of octets received from the client. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter64 |
|
|
assocDuration |
1.3.6.1.4.1.1916.5.3.7.2.1.7 |
Length of time since last association. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
assocWmadIfIndex |
1.3.6.1.4.1.1916.5.3.7.2.1.8 |
Index of WMAD to which the MU is associated with. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
InterfaceIndex |
|
|
protocols |
1.3.6.1.4.1.1916.5.3.8 |
OBJECT IDENTIFIER |
|
|
|
wmadc |
1.3.6.1.4.1.1916.5.3.8.1 |
OBJECT IDENTIFIER |
|
|
|
logEventSeverityThreshold |
1.3.6.1.4.1.1916.5.3.9.1 |
Specifies the minimum level at which the SNMP agent will
send notifications for log events. I.e., setting this
value to 'major' will send notifcations for critical and
major log events. Setting the threshold to minor will
trap critical, major, and minor events.
|
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
LogEventSeverity |
|
|
logEventSeverity |
1.3.6.1.4.1.1916.5.3.9.3 |
Contains the severity of the most recently trapped summitWMLogAlarm notification. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
LogEventSeverity |
|
|
logEventComponent |
1.3.6.1.4.1.1916.5.3.9.4 |
Contains the component which sent the most
recently trapped summitWMLogAlarm notification. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
logEventDescription |
1.3.6.1.4.1.1916.5.3.9.5 |
Contains the description of the most recently trapped
summitWMLogAlarm. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
summitWMLogAlarm |
1.3.6.1.4.1.1916.5.3.9.6 |
Components of an alarm. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
altitudeEventId |
1.3.6.1.4.1.1916.5.3.19.1 |
Identifies event associated with Altitude or Altitude tunnel:
altitudePollTimeout - an event triggered when Altitude disconnects from WM |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
altitudePollTimeout(1) |
|
altitudeEventDescription |
1.3.6.1.4.1.1916.5.3.19.2 |
Contains the description of the most recently triggered event. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
altitudeEventSerialNumber |
1.3.6.1.4.1.1916.5.3.19.3 |
16-character serial number of the Altitude. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(16) |
|
altitudeTunnelAlarm |
1.3.6.1.4.1.1916.5.3.19.4 |
alarm associated with Altitude and Altitude interface. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
summitWMModule |
1.3.6.1.4.1.1916.5.3.30.1 |
Conformance definition for the WM MIB. |
Status: current |
Access: read-only |
MODULE-COMPLIANCE |
|
|
|
summitWMGroup |
1.3.6.1.4.1.1916.5.3.30.2 |
Conformance groups. |
Status: current |
Access: read-only |
OBJECT-GROUP |
|
|
|
summitWMAlarms |
1.3.6.1.4.1.1916.5.3.30.3 |
Conformance information for the alarm groups. |
Status: current |
Access: read-only |
NOTIFICATION-GROUP |
|
|
|