IEEE802dot11-MIB

File: IEEE802dot11-MIB.mib (115073 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC SNMPv2-CONF
RFC1213-MIB

Imported symbols

MODULE-IDENTITY OBJECT-TYPE NOTIFICATION-TYPE
Integer32 Counter32 Unsigned32
DisplayString MacAddress RowStatus
TruthValue MODULE-COMPLIANCE OBJECT-GROUP
NOTIFICATION-GROUP ifIndex

Defined Types

WEPKeytype  
OCTET STRING Size(5)    

Dot11StationConfigEntry  
SEQUENCE    
  dot11StationID MacAddress
  dot11MediumOccupancyLimit INTEGER
  dot11CFPollable TruthValue
  dot11CFPPeriod INTEGER
  dot11CFPMaxDuration INTEGER
  dot11AuthenticationResponseTimeOut Unsigned32
  dot11PrivacyOptionImplemented TruthValue
  dot11PowerManagementMode INTEGER
  dot11DesiredSSID OCTET STRING
  dot11DesiredBSSType INTEGER
  dot11OperationalRateSet OCTET STRING
  dot11BeaconPeriod INTEGER
  dot11DTIMPeriod INTEGER
  dot11AssociationResponseTimeOut Unsigned32
  dot11DisassociateReason INTEGER
  dot11DisassociateStation MacAddress
  dot11DeauthenticateReason INTEGER
  dot11DeauthenticateStation MacAddress
  dot11AuthenticateFailStatus INTEGER
  dot11AuthenticateFailStation MacAddress
  dot11MultiDomainCapabilityImplemented TruthValue
  dot11MultiDomainCapabilityEnabled TruthValue
  dot11CountryString OCTET STRING

Dot11AuthenticationAlgorithmsEntry  
SEQUENCE    
  dot11AuthenticationAlgorithmsIndex Integer32
  dot11AuthenticationAlgorithm INTEGER
  dot11AuthenticationAlgorithmsEnable TruthValue

Dot11WEPDefaultKeysEntry  
SEQUENCE    
  dot11WEPDefaultKeyIndex INTEGER
  dot11WEPDefaultKeyValue WEPKeytype

Dot11WEPKeyMappingsEntry  
SEQUENCE    
  dot11WEPKeyMappingIndex Integer32
  dot11WEPKeyMappingAddress MacAddress
  dot11WEPKeyMappingWEPOn TruthValue
  dot11WEPKeyMappingValue WEPKeytype
  dot11WEPKeyMappingStatus RowStatus

Dot11PrivacyEntry  
SEQUENCE    
  dot11PrivacyInvoked TruthValue
  dot11WEPDefaultKeyID INTEGER
  dot11WEPKeyMappingLength Unsigned32
  dot11ExcludeUnencrypted TruthValue
  dot11WEPICVErrorCount Counter32
  dot11WEPExcludedCount Counter32

Dot11MultiDomainCapabilityEntry  
SEQUENCE    
  dot11MultiDomainCapabilityIndex Integer32
  dot11FirstChannelNumber Integer32
  dot11NumberofChannels Integer32
  dot11MaximumTransmitPowerLevel Integer32

Dot11OperationEntry  
SEQUENCE    
  dot11MACAddress MacAddress
  dot11RTSThreshold INTEGER
  dot11ShortRetryLimit INTEGER
  dot11LongRetryLimit INTEGER
  dot11FragmentationThreshold INTEGER
  dot11MaxTransmitMSDULifetime Unsigned32
  dot11MaxReceiveLifetime Unsigned32
  dot11ManufacturerID DisplayString
  dot11ProductID DisplayString

Dot11CountersEntry  
SEQUENCE    
  dot11TransmittedFragmentCount Counter32
  dot11MulticastTransmittedFrameCount Counter32
  dot11FailedCount Counter32
  dot11RetryCount Counter32
  dot11MultipleRetryCount Counter32
  dot11FrameDuplicateCount Counter32
  dot11RTSSuccessCount Counter32
  dot11RTSFailureCount Counter32
  dot11ACKFailureCount Counter32
  dot11ReceivedFragmentCount Counter32
  dot11MulticastReceivedFrameCount Counter32
  dot11FCSErrorCount Counter32
  dot11TransmittedFrameCount Counter32
  dot11WEPUndecryptableCount Counter32

Dot11GroupAddressesEntry  
SEQUENCE    
  dot11GroupAddressesIndex Integer32
  dot11Address MacAddress
  dot11GroupAddressesStatus RowStatus

Dot11ResourceInfoEntry  
SEQUENCE    
  dot11manufacturerOUI OCTET STRING
  dot11manufacturerName DisplayString
  dot11manufacturerProductName DisplayString
  dot11manufacturerProductVersion DisplayString

Dot11PhyOperationEntry  
SEQUENCE    
  dot11PHYType INTEGER
  dot11CurrentRegDomain Integer32
  dot11TempType INTEGER

Dot11PhyAntennaEntry  
SEQUENCE    
  dot11CurrentTxAntenna Integer32
  dot11DiversitySupport INTEGER
  dot11CurrentRxAntenna Integer32

Dot11PhyTxPowerEntry  
SEQUENCE    
  dot11NumberSupportedPowerLevels INTEGER
  dot11TxPowerLevel1 INTEGER
  dot11TxPowerLevel2 INTEGER
  dot11TxPowerLevel3 INTEGER
  dot11TxPowerLevel4 INTEGER
  dot11TxPowerLevel5 INTEGER
  dot11TxPowerLevel6 INTEGER
  dot11TxPowerLevel7 INTEGER
  dot11TxPowerLevel8 INTEGER
  dot11CurrentTxPowerLevel INTEGER

Dot11PhyFHSSEntry  
SEQUENCE    
  dot11HopTime INTEGER
  dot11CurrentChannelNumber INTEGER
  dot11MaxDwellTime INTEGER
  dot11CurrentDwellTime INTEGER
  dot11CurrentSet INTEGER
  dot11CurrentPattern INTEGER
  dot11CurrentIndex INTEGER
  dot11EHCCPrimeRadix Integer32
  dot11EHCCNumberofChannelsFamilyIndex Integer32
  dot11EHCCCapabilityImplemented TruthValue
  dot11EHCCCapabilityEnabled TruthValue
  dot11HopAlgorithmAdopted INTEGER
  dot11RandomTableFlag TruthValue
  dot11NumberofHoppingSets Integer32
  dot11HopModulus Integer32
  dot11HopOffset Integer32

Dot11PhyDSSSEntry  
SEQUENCE    
  dot11CurrentChannel INTEGER
  dot11CCAModeSupported INTEGER
  dot11CurrentCCAMode INTEGER
  dot11EDThreshold Integer32

Dot11PhyIREntry  
SEQUENCE    
  dot11CCAWatchdogTimerMax Integer32
  dot11CCAWatchdogCountMax Integer32
  dot11CCAWatchdogTimerMin Integer32
  dot11CCAWatchdogCountMin Integer32

Dot11RegDomainsSupportedEntry  
SEQUENCE    
  dot11RegDomainsSupportedIndex Integer32
  dot11RegDomainsSupportedValue INTEGER

Dot11AntennasListEntry  
SEQUENCE    
  dot11AntennaListIndex Integer32
  dot11SupportedTxAntenna TruthValue
  dot11SupportedRxAntenna TruthValue
  dot11DiversitySelectionRx TruthValue

Dot11SupportedDataRatesTxEntry  
SEQUENCE    
  dot11SupportedDataRatesTxIndex Integer32
  dot11SupportedDataRatesTxValue Integer32

Dot11SupportedDataRatesRxEntry  
SEQUENCE    
  dot11SupportedDataRatesRxIndex Integer32
  dot11SupportedDataRatesRxValue Integer32

Dot11PhyOFDMEntry  
SEQUENCE    
  dot11CurrentFrequency INTEGER
  dot11TIThreshold Integer32
  dot11FrequencyBandsSupported INTEGER

Dot11PhyHRDSSSEntry  
SEQUENCE    
  dot11ShortPreambleOptionImplemented TruthValue
  dot11PBCCOptionImplemented TruthValue
  dot11ChannelAgilityPresent TruthValue
  dot11ChannelAgilityEnabled TruthValue
  dot11HRCCAModeSupported INTEGER

Dot11HoppingPatternEntry  
SEQUENCE    
  dot11HoppingPatternIndex Integer32
  dot11RandomTableFieldNumber Integer32

Defined Values

member-body 1.2
OBJECT IDENTIFIER    

us 1.2.840
OBJECT IDENTIFIER    

ieee802dot11 1.2.840.10036
The MIB module for IEEE 802.11 entities. iso(1).member-body(2).us(840).ieee802dot11(10036)
MODULE-IDENTITY    

dot11smt 1.2.840.10036.1
OBJECT IDENTIFIER    

dot11mac 1.2.840.10036.2
OBJECT IDENTIFIER    

dot11res 1.2.840.10036.3
OBJECT IDENTIFIER    

dot11resAttribute 1.2.840.10036.3.1
OBJECT IDENTIFIER    

dot11phy 1.2.840.10036.4
OBJECT IDENTIFIER    

dot11StationConfigTable 1.2.840.10036.1.1
Station Configuration attributes. In tablular form to allow for multiple instances on an agent.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Dot11StationConfigEntry

dot11StationConfigEntry 1.2.840.10036.1.1.1
An entry in the dot11StationConfigTable. It is possible for there to be multiple IEEE 802.11 interfaces on one agent, each with its unique MAC address. The relationship between an IEEE 802.11 interface and an interface in the context of the Internet-standard MIB is one-to-one. As such, the value of an ifIndex object instance can be directly used to identify corresponding instances of the objects defined herein. ifIndex - Each IEEE 802.11 interface is represented by an ifEntry. Interface tables in this MIB module are indexed by ifIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  Dot11StationConfigEntry  

dot11StationID 1.2.840.10036.1.1.1.1
The purpose of dot11StationID is to allow a manager to identify a station for its own purposes. This attribute provides for that eventuality while keeping the true MAC address independent. Its syntax is MAC address, and the default value is the station's assigned, unique MAC address.
Status: deprecated Access: read-write
OBJECT-TYPE    
  MacAddress  

dot11MediumOccupancyLimit 1.2.840.10036.1.1.1.2
This attribute shall indicate the maximum amount of time, in TU, that a point coordinator (PC) may control the usage of the wireless medium (WM) without relinquishing control for long enough to allow at least one instance of DCF access to the medium. The default value of this attribute shall be 100, and the maximum value shall be 1000.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..1000  

dot11CFPollable 1.2.840.10036.1.1.1.3
When this attribute is true, it shall indicate that the STA is able to respond to a CF-Poll with a data frame within a SIFS time. This attribute shall be false if the STA is not able to respond to a CF-Poll with a data frame within a SIFS time.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

dot11CFPPeriod 1.2.840.10036.1.1.1.4
The attribute shall describe the number of DTIM intervals between the start of CFPs. It is modified by MLME-START.request primitive.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

dot11CFPMaxDuration 1.2.840.10036.1.1.1.5
The attribute shall describe the maximum duration of the CFP in TU that may be generated by the PCF. It is modified by MLME-START.request primitive.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

dot11AuthenticationResponseTimeOut 1.2.840.10036.1.1.1.6
This attribute shall specify the number of time units (TUs) that a responding STA should wait for the next frame in the authentication sequence.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..4294967295  

dot11PrivacyOptionImplemented 1.2.840.10036.1.1.1.7
This attribute, when true, shall indicate that the IEEE 802.11 WEP option is implemented. The default value of this attribute shall be false.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

dot11PowerManagementMode 1.2.840.10036.1.1.1.8
This attribute shall specify the power management mode of the STA. When set to active, it shall indicate that the station is not in power-save (PS) mode. When set to powersave, it shall indicate that the station is in power-save mode. The power management mode is transmitted in all frames according to the rules in 7.1.3.1.7.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER active(1), powersave(2)  

dot11DesiredSSID 1.2.840.10036.1.1.1.9
This attribute reflects the Service Set ID (SSID) used in the DesiredSSID parameter of the most recent MLME_Scan.request. This value may be modified by an external management entity and used by the local SME to make decisions about the Scanning process.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

dot11DesiredBSSType 1.2.840.10036.1.1.1.10
This attribute shall specify the type of BSS the station shall use when scanning for a BSS with which to synchronize. This value is used to filter Probe Response frames and Beacons. When set to infrastructure, the station shall only synchronize with a BSS whose Capability Information field has the ESS subfield set to 1. When set to independent, the station shall only synchronize with a BSS whose Capability Information field has the IBSS subfield set to 1. When set to any, the station may synchronize to either type of BSS.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER infrastructure(1), independent(2), any(3)  

dot11OperationalRateSet 1.2.840.10036.1.1.1.11
This attribute shall specify the set of data rates at which the station may transmit data. Each octet contains a value representing a rate. Each rate shall be within the range from 2 to 127, corresponding to data rates in increments of 500 kbit/s from 1 Mbit/s to 63.5 Mbit/s, and shall be supported (as indicated in the supported rates table) for receiving data. This value is reported in transmitted Beacon, Probe Request, Probe Response, Association Request, Association Response, Reassociation Request, and Reassociation Response frames, and is used to determine whether a BSS with which the station desires to synchronize is suitable. It is also used when starting a BSS, as specified in 10.3.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..126)  

dot11BeaconPeriod 1.2.840.10036.1.1.1.12
This attribute shall specify the number of TUs that a station shall use for scheduling Beacon transmissions. This value is transmitted in Beacon and Probe Response frames.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..65535  

dot11DTIMPeriod 1.2.840.10036.1.1.1.13
This attribute shall specify the number of beacon intervals that shall elapse between transmission of Beacons frames containing a TIM element whose DTIM Count field is 0. This value is transmitted in the DTIM Period field of Beacon frames.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..255  

dot11AssociationResponseTimeOut 1.2.840.10036.1.1.1.14
This attribute shall specify the number of TU that a requesting STA should wait for a response to a transmitted association-request MMPDU.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..4294967295  

dot11DisassociateReason 1.2.840.10036.1.1.1.15
This attribute holds the most recently transmitted Reason Code in a Disassociation frame. If no Disassociation frame has been transmitted, the value of this attribute shall be 0.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

dot11DisassociateStation 1.2.840.10036.1.1.1.16
This attribute holds the MAC address from the Address 1 field of the most recently transmitted Disassociation frame. If no Disassociation frame has been transmitted, the value of this attribute shall be 0.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

dot11DeauthenticateReason 1.2.840.10036.1.1.1.17
This attribute holds the most recently transmitted Reason Code in a Deauthentication frame. If no Deauthentication frame has been transmitted, the value of this attribute shall be 0.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

dot11DeauthenticateStation 1.2.840.10036.1.1.1.18
This attribute holds the MAC address from the Address 1 field of the most recently transmitted Deauthentication frame. If no Deauthentication frame has been transmitted, the value of this attribute shall be 0.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

dot11AuthenticateFailStatus 1.2.840.10036.1.1.1.19
This attribute holds the most recently transmitted Status Code in a failed Authentication frame. If no failed Authentication frame has been transmitted, the value of this attribute shall be 0.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

dot11AuthenticateFailStation 1.2.840.10036.1.1.1.20
This attribute holds the MAC address from the Address 1 field of the most recently transmitted failed Authentication frame. If no failed Authentication frame has been transmitted, the value of this attribute shall be 0.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

dot11MultiDomainCapabilityImplemented 1.2.840.10036.1.1.1.21
This attribute, when TRUE, indicates that the station implementation is capable of supporting multiple regulatory domains. The capability is disabled, otherwise. The default value of this attribute is FALSE.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

dot11MultiDomainCapabilityEnabled 1.2.840.10036.1.1.1.22
This attribute, when TRUE, indicates that the capability of the station to operate in multiple regulatory domains is enabled. The capability is disabled, otherwise. The default value of this attribute is FALSE.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

dot11CountryString 1.2.840.10036.1.1.1.23
This attribute identifies the country in which the station is operating. The first two octets of this string is the two character country code as described in document ISO/IEC 3166-1. The third octet shall be one of the following: 1. an ASCII space character, if the regulations under which the station is operating encompass all environments in the country, 2. an ASCII 'O' character, if the regulations under which the station is operating are for an Outdoor environment only, or 3. an ASCII 'I' character, if the regulations under which the station is operating are for an Indoor environment only.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(3)  

dot11AuthenticationAlgorithmsTable 1.2.840.10036.1.2
This (conceptual) table of attributes shall be a set of all the authentication algorithms supported by the stations. The following are the default values and the associated algorithm: Value = 1: Open System Value = 2: Shared Key
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Dot11AuthenticationAlgorithmsEntry

dot11AuthenticationAlgorithmsEntry 1.2.840.10036.1.2.1
An Entry (conceptual row) in the Authentication Algorithms Table. ifIndex - Each IEEE 802.11 interface is represented by an ifEntry. Interface tables in this MIB module are indexed by ifIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  Dot11AuthenticationAlgorithmsEntry  

dot11AuthenticationAlgorithmsIndex 1.2.840.10036.1.2.1.1
The auxiliary variable used to identify instances of the columnar objects in the Authentication Algorithms Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

dot11AuthenticationAlgorithm 1.2.840.10036.1.2.1.2
This attribute shall be a set of all the authentication algorithms supported by the STAs. The following are the default values and the associated algorithm. Value = 1: Open System Value = 2: Shared Key
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER openSystem(1), sharedKey(2)  

dot11AuthenticationAlgorithmsEnable 1.2.840.10036.1.2.1.3
This attribute, when true at a station, shall enable the acceptance of the authentication algorithm described in the corresponding table entry in authentication frames received by the station that have odd authentication sequence numbers. The default value of this attribute shall be 1 for the Open System table entry and 2 for all other table entries.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

dot11WEPDefaultKeysTable 1.2.840.10036.1.3
Conceptual table for WEP default keys. This table shall contain the four WEP default secret key values corresponding to the four possible KeyID values. The WEP default secret keys are logically WRITE-ONLY. Attempts to read the entries in this table shall return unsuccessful status and values of null or zero. The default value of each WEP default key shall be null.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Dot11WEPDefaultKeysEntry

dot11WEPDefaultKeysEntry 1.2.840.10036.1.3.1
An Entry (conceptual row) in the WEP Default Keys Table. ifIndex - Each IEEE 802.11 interface is represented by an ifEntry. Interface tables in this MIB module are indexed by ifIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  Dot11WEPDefaultKeysEntry  

dot11WEPDefaultKeyIndex 1.2.840.10036.1.3.1.1
The auxiliary variable used to identify instances of the columnar objects in the WEP Default Keys Table. The value of this variable is equal to the WEPDefaultKeyID + 1
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER 1..4  

dot11WEPDefaultKeyValue 1.2.840.10036.1.3.1.2
A WEP default secret key value.
Status: current Access: read-write
OBJECT-TYPE    
  WEPKeytype  

dot11WEPKeyMappingsTable 1.2.840.10036.1.4
Conceptual table for WEP Key Mappings. The MIB supports the ability to share a separate WEP key for each RA/TA pair. The Key Mappings Table contains zero or one entry for each MAC address and contains two fields for each entry: WEPOn and the corresponding WEP key. The WEP key mappings are logically WRITE-ONLY. Attempts to read the entries in this table shall return unsuccessful status and values of null or zero. The default value for all WEPOn fields is false.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Dot11WEPKeyMappingsEntry

dot11WEPKeyMappingsEntry 1.2.840.10036.1.4.1
An Entry (conceptual row) in the WEP Key Mappings Table. ifIndex - Each IEEE 802.11 interface is represented by an ifEntry. Interface tables in this MIB module are indexed by ifIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  Dot11WEPKeyMappingsEntry  

dot11WEPKeyMappingIndex 1.2.840.10036.1.4.1.1
The auxiliary variable used to identify instances of the columnar objects in the WEP Key Mappings Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

dot11WEPKeyMappingAddress 1.2.840.10036.1.4.1.2
The MAC address of the STA for which the values from this key mapping entry are to be used.
Status: current Access: read-create
OBJECT-TYPE    
  MacAddress  

dot11WEPKeyMappingWEPOn 1.2.840.10036.1.4.1.3
Boolean as to whether WEP is to be used when communicating with the dot11WEPKeyMappingAddress STA.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

dot11WEPKeyMappingValue 1.2.840.10036.1.4.1.4
A WEP secret key value.
Status: current Access: read-create
OBJECT-TYPE    
  WEPKeytype  

dot11WEPKeyMappingStatus 1.2.840.10036.1.4.1.5
The status column used for creating, modifying, and deleting instances of the columnar objects in the WEP key mapping Table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

dot11PrivacyTable 1.2.840.10036.1.5
Group containing attributes concerned with IEEE 802.11 Privacy. Created as a table to allow multiple instantiations on an agent.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Dot11PrivacyEntry

dot11PrivacyEntry 1.2.840.10036.1.5.1
An entry in the dot11PrivacyTable Table. ifIndex - Each IEEE 802.11 interface is represented by an ifEntry. Interface tables in this MIB module are indexed by ifIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  Dot11PrivacyEntry  

dot11PrivacyInvoked 1.2.840.10036.1.5.1.1
When this attribute is true, it shall indicate that the IEEE 802.11 WEP mechanism is used for transmitting frames of type Data. The default value of this attribute shall be false.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

dot11WEPDefaultKeyID 1.2.840.10036.1.5.1.2
This attribute shall indicate the use of the first, second, third, or fourth element of the WEPDefaultKeys array when set to values of zero, one, two, or three. The default value of this attribute shall be 0.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..3  

dot11WEPKeyMappingLength 1.2.840.10036.1.5.1.3
The maximum number of tuples that dot11WEPKeyMappings can hold.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 10..4294967295  

dot11ExcludeUnencrypted 1.2.840.10036.1.5.1.4
When this attribute is true, the STA shall not indicate at the MAC service interface received MSDUs that have the WEP subfield of the Frame Control field equal to zero. When this attribute is false, the STA may accept MSDUs that have the WEP subfield of the Frame Control field equal to zero. The default value of this attribute shall be false.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

dot11WEPICVErrorCount 1.2.840.10036.1.5.1.5
This counter shall increment when a frame is received with the WEP subfield of the Frame Control field set to one and the value of the ICV as received in the frame does not match the ICV value that is calculated for the contents of the received frame.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

dot11WEPExcludedCount 1.2.840.10036.1.5.1.6
This counter shall increment when a frame is received with the WEP subfield of the Frame Control field set to zero and the value of dot11ExcludeUnencrypted causes that frame to be discarded.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

dot11SMTnotification 1.2.840.10036.1.6
OBJECT IDENTIFIER    

dot11Disassociate 1.2.840.10036.1.6.0.1
The disassociate notification shall be sent when the STA sends a Disassociation frame. The value of the notification shall include the MAC address of the MAC to which the Disassociation frame was sent and the reason for the disassociation. ifIndex - Each IEEE 802.11 interface is represented by an ifEntry. Interface tables in this MIB module are indexed by ifIndex.
Status: current Access: read-only
NOTIFICATION-TYPE    

dot11Deauthenticate 1.2.840.10036.1.6.0.2
The deauthenticate notification shall be sent when the STA sends a Deauthentication frame. The value of the notification shall include the MAC address of the MAC to which the Deauthentication frame was sent and the reason for the deauthentication. ifIndex - Each IEEE 802.11 interface is represented by an ifEntry. Interface tables in this MIB module are indexed by ifIndex.
Status: current Access: read-only
NOTIFICATION-TYPE    

dot11AuthenticateFail 1.2.840.10036.1.6.0.3
The authenticate failure notification shall be sent when the STA sends an Authentication frame with a status code other than 'successful'. The value of the notification shall include the MAC address of the MAC to which the Authentication frame was sent and the reason for the authentication failure. ifIndex - Each IEEE 802.11 interface is represented by an ifEntry. Interface tables in this MIB module are indexed by ifIndex.
Status: current Access: read-only
NOTIFICATION-TYPE    

dot11MultiDomainCapabilityTable 1.2.840.10036.1.7
This (conceptual) table of attributes for cross-domain mobility.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Dot11MultiDomainCapabilityEntry

dot11MultiDomainCapabilityEntry 1.2.840.10036.1.7.1
An entry (conceptual row) in the Multiple Domain Capability Table. IfIndex - Each IEEE 802.11 interface is represented by an ifEntry. Interface tables in this MIB are indexed by ifIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  Dot11MultiDomainCapabilityEntry  

dot11MultiDomainCapabilityIndex 1.2.840.10036.1.7.1.1
The auxiliary variable used to identify instances of the columnar objects in the Multi Domain Capability Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

dot11FirstChannelNumber 1.2.840.10036.1.7.1.2
This attribute shall indicate the value of the lowest channel number in the subband for the associated domain country string. The default value of this attribute shall be zero.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

dot11NumberofChannels 1.2.840.10036.1.7.1.3
This attribute shall indicate the value of the total number of channels allowed in the subband for the associated domain country string. The default value of this attribute shall be zero.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

dot11MaximumTransmitPowerLevel 1.2.840.10036.1.7.1.4
This attribute shall indicate the maximum transmit power, in dBm, allowed in the subband for the associated domain country string. The default value of this attribute shall be zero.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

dot11OperationTable 1.2.840.10036.2.1
Group contains MAC attributes pertaining to the operation of the MAC. This has been implemented as a table in order to allow for multiple instantiations on an agent.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Dot11OperationEntry

dot11OperationEntry 1.2.840.10036.2.1.1
An entry in the dot11OperationEntry Table. ifIndex - Each IEEE 802.11 interface is represented by an ifEntry. Interface tables in this MIB module are indexed by ifIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  Dot11OperationEntry  

dot11MACAddress 1.2.840.10036.2.1.1.1
Unique MAC Address assigned to the STA.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

dot11RTSThreshold 1.2.840.10036.2.1.1.2
This attribute shall indicate the number of octets in an MPDU, below which an RTS/CTS handshake shall not be performed. An RTS/CTS handshake shall be performed at the beginning of any frame exchange sequence where the MPDU is of type Data or Management, the MPDU has an individual address in the Address1 field, and the length of the MPDU is greater than this threshold. (For additional details, refer to Table 21 in 9.7.) Setting this attribute to be larger than the maximum MSDU size shall have the effect of turning off the RTS/CTS handshake for frames of Data or Management type transmitted by this STA. Setting this attribute to zero shall have the effect of turning on the RTS/CTS handshake for all frames of Data or Management type transmitted by this STA. The default value of this attribute shall be 2347.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..2347  

dot11ShortRetryLimit 1.2.840.10036.2.1.1.3
This attribute shall indicate the maximum number of transmission attempts of a frame, the length of which is less than or equal to dot11RTSThreshold, that shall be made before a failure condition is indicated. The default value of this attribute shall be 7.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..255  

dot11LongRetryLimit 1.2.840.10036.2.1.1.4
This attribute shall indicate the maximum number of transmission attempts of a frame, the length of which is greater than dot11RTSThreshold, that shall be made before a failure condition is indicated. The default value of this attribute shall be 4.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..255  

dot11FragmentationThreshold 1.2.840.10036.2.1.1.5
This attribute shall specify the current maximum size, in octets, of the MPDU that may be delivered to the PHY. An MSDU shall be broken into fragments if its size exceeds the value of this attribute after adding MAC headers and trailers. An MSDU or MMPDU shall be fragmented when the resulting frame has an individual address in the Address1 field, and the length of the frame is larger than this threshold. The default value for this attribute shall be the lesser of 2346 or the aMPDUMaxLength of the attached PHY and shall never exceed the lesser of 2346 or the aMPDUMaxLength of the attached PHY. The value of this attribute shall never be less than 256.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 256..2346  

dot11MaxTransmitMSDULifetime 1.2.840.10036.2.1.1.6
The MaxTransmitMSDULifetime shall be the elapsed time in TU, after the initial transmission of an MSDU, after which further attempts to transmit the MSDU shall be terminated. The default value of this attribute shall be 512.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..4294967295  

dot11MaxReceiveLifetime 1.2.840.10036.2.1.1.7
The MaxReceiveLifetime shall be the elapsed time in TU, after the initial reception of a fragmented MMPDU or MSDU, after which further attempts to reassemble the MMPDU or MSDU shall be terminated. The default value shall be 512.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..4294967295  

dot11ManufacturerID 1.2.840.10036.2.1.1.8
The ManufacturerID shall include, at a minimum, the name of the manufacturer. It may include additional information at the manufacturer's discretion. The default value of this attribute shall be null.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..128)  

dot11ProductID 1.2.840.10036.2.1.1.9
The ProductID shall include, at a minimum, an identifier that is unique to the manufacturer. It may include additional information at the manufacturer's discretion. The default value of this attribute shall be null.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..128)  

dot11CountersTable 1.2.840.10036.2.2
Group containing attributes that are MAC counters. Implemented as a table to allow for multiple instantiations on an agent.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Dot11CountersEntry

dot11CountersEntry 1.2.840.10036.2.2.1
An entry in the dot11CountersEntry Table. ifIndex - Each IEEE 802.11 interface is represented by an ifEntry. Interface tables in this MIB module are indexed by ifIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  Dot11CountersEntry  

dot11TransmittedFragmentCount 1.2.840.10036.2.2.1.1
This counter shall be incremented for an acknowledged MPDU with an individual address in the address 1 field or an MPDU with a multicast address in the address 1 field of type Data or Management.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

dot11MulticastTransmittedFrameCount 1.2.840.10036.2.2.1.2
This counter shall increment only when the multicast bit is set in the destination MAC address of a successfully transmitted MSDU. When operating as a STA in an ESS, where these frames are directed to the AP, this implies having received an acknowledgment to all associated MPDUs.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

dot11FailedCount 1.2.840.10036.2.2.1.3
This counter shall increment when an MSDU is not transmitted successfully due to the number of transmit attempts exceeding either the dot11ShortRetryLimit or dot11LongRetryLimit.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

dot11RetryCount 1.2.840.10036.2.2.1.4
This counter shall increment when an MSDU is successfully transmitted after one or more retransmissions.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

dot11MultipleRetryCount 1.2.840.10036.2.2.1.5
This counter shall increment when an MSDU is successfully transmitted after more than one retransmission.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

dot11FrameDuplicateCount 1.2.840.10036.2.2.1.6
This counter shall increment when a frame is received that the Sequence Control field indicates is a duplicate.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

dot11RTSSuccessCount 1.2.840.10036.2.2.1.7
This counter shall increment when a CTS is received in response to an RTS.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

dot11RTSFailureCount 1.2.840.10036.2.2.1.8
This counter shall increment when a CTS is not received in response to an RTS.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

dot11ACKFailureCount 1.2.840.10036.2.2.1.9
This counter shall increment when an ACK is not received when expected.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

dot11ReceivedFragmentCount 1.2.840.10036.2.2.1.10
This counter shall be incremented for each successfully received MPDU of type Data or Management.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

dot11MulticastReceivedFrameCount 1.2.840.10036.2.2.1.11
This counter shall increment when a MSDU is received with the multicast bit set in the destination MAC address.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

dot11FCSErrorCount 1.2.840.10036.2.2.1.12
This counter shall increment when an FCS error is detected in a received MPDU.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

dot11TransmittedFrameCount 1.2.840.10036.2.2.1.13
This counter shall increment for each successfully transmitted MSDU.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

dot11WEPUndecryptableCount 1.2.840.10036.2.2.1.14
This counter shall increment when a frame is received with the WEP subfield of the Frame Control field set to one and the WEPOn value for the key mapped to the TA's MAC address indicates that the frame should not have been encrypted or that frame is discarded due to the receiving STA not implementing the privacy option.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

dot11GroupAddressesTable 1.2.840.10036.2.3
A conceptual table containing a set of MAC addresses identifying the multicast addresses for which this STA will receive frames. The default value of this attribute shall be null.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Dot11GroupAddressesEntry

dot11GroupAddressesEntry 1.2.840.10036.2.3.1
An Entry (conceptual row) in the Group Addresses Table. ifIndex - Each IEEE 802.11 interface is represented by an ifEntry. Interface tables in this MIB module are indexed by ifIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  Dot11GroupAddressesEntry  

dot11GroupAddressesIndex 1.2.840.10036.2.3.1.1
The auxiliary variable used to identify instances of the columnar objects in the Group Addresses Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

dot11Address 1.2.840.10036.2.3.1.2
MAC address identifying a multicast addresses from which this STA will receive frames.
Status: current Access: read-create
OBJECT-TYPE    
  MacAddress  

dot11GroupAddressesStatus 1.2.840.10036.2.3.1.3
The status column used for creating, modifying, and deleting instances of the columnar objects in the Group Addresses Table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

dot11ResourceTypeIDName 1.2.840.10036.3.1.1
Contains the name of the Resource Type ID managed object. The attribute is read-only and always contains the value RTID. This attribute value shall not be used as a naming attribute for any other managed object class.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(4)  

dot11ResourceInfoTable 1.2.840.10036.3.1.2
Provides a means of indicating, in data readable from a managed object, information that identifies the source of the implementation.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Dot11ResourceInfoEntry

dot11ResourceInfoEntry 1.2.840.10036.3.1.2.1
An entry in the dot11ResourceInfo Table. ifIndex - Each IEEE 802.11 interface is represented by an ifEntry. Interface tables in this MIB module are indexed by ifIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  Dot11ResourceInfoEntry  

dot11manufacturerOUI 1.2.840.10036.3.1.2.1.1
Takes the value of an organizationally unique identifier.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(3)  

dot11manufacturerName 1.2.840.10036.3.1.2.1.2
A printable string used to identify the manufacturer of the resource. Maximum string length is 128 octets.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..128)  

dot11manufacturerProductName 1.2.840.10036.3.1.2.1.3
A printable string used to identify the manufacturer's product name of the resource. Maximum string length is 128 octets.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..128)  

dot11manufacturerProductVersion 1.2.840.10036.3.1.2.1.4
Printable string used to identify the manufacturer's product version of the resource. Maximum string length is 128 octets.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..128)  

dot11PhyOperationTable 1.2.840.10036.4.1
PHY level attributes concerned with operation. Implemented as a table indexed on ifIndex to allow for multiple instantiations on an Agent.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Dot11PhyOperationEntry

dot11PhyOperationEntry 1.2.840.10036.4.1.1
An entry in the dot11PhyOperation Table. ifIndex - Each IEEE 802.11 interface is represented by an ifEntry. Interface tables in this MIB module are indexed by ifIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  Dot11PhyOperationEntry  

dot11PHYType 1.2.840.10036.4.1.1.1
This is an 8-bit integer value that identifies the PHY type supported by the attached PLCP and PMD. Currently defined values and their corresponding PHY types are: FHSS 2.4 GHz = 01 , DSSS 2.4 GHz = 02, IR Baseband = 03, OFDM 5GHz = 04, HRDSSS = 05
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER fhss(1), dsss(2), irbaseband(3), ofdm(4), hrdsss(5)  

dot11CurrentRegDomain 1.2.840.10036.4.1.1.2
The current regulatory domain this instance of the PMD is supporting. This object corresponds to one of the RegDomains listed in dot11RegDomainsSupported.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

dot11TempType 1.2.840.10036.4.1.1.3
There are different operating temperature requirements dependent on the anticipated environmental conditions. This attribute describes the current PHY's operating temperature range capability. Currently defined values and their corresponding temperature ranges are: Type 1 = X'01'-Commercial range of 0 to 40 degrees C, Type 2 = X'02'-Industrial range of -30 to 70 degrees C.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER tempType1(1), tempType2(2)  

dot11PhyAntennaTable 1.2.840.10036.4.2
Group of attributes for PhyAntenna. Implemented as a table indexed on ifIndex to allow for multiple instances on an agent.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Dot11PhyAntennaEntry

dot11PhyAntennaEntry 1.2.840.10036.4.2.1
An entry in the dot11PhyAntenna Table. ifIndex - Each IEEE 802.11 interface is represented by an ifEntry. Interface tables in this MIB module are indexed by ifIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  Dot11PhyAntennaEntry  

dot11CurrentTxAntenna 1.2.840.10036.4.2.1.1
The current antenna being used to transmit. This value is one of the values appearing in dot11SupportedTxAntenna. This may be used by a management agent to control which antenna is used for transmission.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..255  

dot11DiversitySupport 1.2.840.10036.4.2.1.2
This implementation's support for diversity, encoded as: X'01'-diversity is available and is performed over the fixed list of antennas defined in dot11DiversitySelectionRx. X'02'-diversity is not supported. X'03'-diversity is supported and control of diversity is also available, in which case the attribute dot11DiversitySelectionRx can be dynamically modified by the LME.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER fixedlist(1), notsupported(2), dynamic(3)  

dot11CurrentRxAntenna 1.2.840.10036.4.2.1.3
The current antenna being used to receive, if the dot11 DiversitySupport indicates that diversity is not supported. The selected antenna shall be one of the antennae marked for receive in the dot11AntennasListTable.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..255  

dot11PhyTxPowerTable 1.2.840.10036.4.3
Group of attributes for dot11PhyTxPowerTable. Implemented as a table indexed on STA ID to allow for multiple instances on an Agent.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Dot11PhyTxPowerEntry

dot11PhyTxPowerEntry 1.2.840.10036.4.3.1
An entry in the dot11PhyTxPower Table. ifIndex - Each IEEE 802.11 interface is represented by an ifEntry. Interface tables in this MIB module are indexed by ifIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  Dot11PhyTxPowerEntry  

dot11NumberSupportedPowerLevels 1.2.840.10036.4.3.1.1
The number of power levels supported by the PMD. This attribute can have a value of 1 to 8.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..8  

dot11TxPowerLevel1 1.2.840.10036.4.3.1.2
The transmit output power for LEVEL1 in mW. This is also the default power level.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..10000  

dot11TxPowerLevel2 1.2.840.10036.4.3.1.3
The transmit output power for LEVEL2 in mW.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..10000  

dot11TxPowerLevel3 1.2.840.10036.4.3.1.4
The transmit output power for LEVEL3 in mW.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..10000  

dot11TxPowerLevel4 1.2.840.10036.4.3.1.5
The transmit output power for LEVEL4 in mW.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..10000  

dot11TxPowerLevel5 1.2.840.10036.4.3.1.6
The transmit output power for LEVEL5 in mW.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..10000  

dot11TxPowerLevel6 1.2.840.10036.4.3.1.7
The transmit output power for LEVEL6 in mW.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..10000  

dot11TxPowerLevel7 1.2.840.10036.4.3.1.8
The transmit output power for LEVEL7 in mW.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..10000  

dot11TxPowerLevel8 1.2.840.10036.4.3.1.9
The transmit output power for LEVEL8 in mW.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..10000  

dot11CurrentTxPowerLevel 1.2.840.10036.4.3.1.10
The TxPowerLevel N currently being used to transmit data. Some PHYs also use this value to determine the receiver sensitivity requirements for CCA.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..8  

dot11PhyFHSSTable 1.2.840.10036.4.4
Group of attributes for dot11PhyFHSSTable. Implemented as a table indexed on STA ID to allow for multiple instances on an Agent.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Dot11PhyFHSSEntry

dot11PhyFHSSEntry 1.2.840.10036.4.4.1
An entry in the dot11PhyFHSS Table. ifIndex - Each IEEE 802.11 interface is represented by an ifEntry. Interface tables in this MIB module are indexed by ifIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  Dot11PhyFHSSEntry  

dot11HopTime 1.2.840.10036.4.4.1.1
The time in microseconds for the PMD to change from channel 2 to channel 80.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 224  

dot11CurrentChannelNumber 1.2.840.10036.4.4.1.2
The current channel number of the frequency output by the RF synthesizer.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..200  

dot11MaxDwellTime 1.2.840.10036.4.4.1.3
The maximum time in TU that the transmitter is permitted to operate on a single channel.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

dot11CurrentDwellTime 1.2.840.10036.4.4.1.4
The current time in TU that the transmitter shall operate on a single channel, as set by the MAC. Default is 19 TU.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..65535  

dot11CurrentSet 1.2.840.10036.4.4.1.5
The current set of patterns the PLME is using to determine the hopping sequence.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..255  

dot11CurrentPattern 1.2.840.10036.4.4.1.6
The current pattern the PLME is using to determine the hop sequence.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

dot11CurrentIndex 1.2.840.10036.4.4.1.7
The current index value the PLME is using to determine the CurrentChannelNumber.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..255  

dot11EHCCPrimeRadix 1.2.840.10036.4.4.1.8
This attribute indicates the value to be used as the prime radix (N) in the HCC and EHCC algorithms.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

dot11EHCCNumberofChannelsFamilyIndex 1.2.840.10036.4.4.1.9
This attribute indicates the value to be used as the maximum for the family index (a) in the HCC and EHCC algorithms. The value of this field shall not be less than the prime radix minus 3 (N - 3). The valid range of allowed values is (N - 1), (N - 2), and (N - 3).
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

dot11EHCCCapabilityImplemented 1.2.840.10036.4.4.1.10
This attribute, when TRUE, indicates that the station implementation is capable of generating the HCC or EHCC algorithms for determining Hopping patterns. The capability is disabled, otherwise. The default value of this attribute is FALSE.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

dot11EHCCCapabilityEnabled 1.2.840.10036.4.4.1.11
This attribute, when TRUE, indicates that the capability of the station to operate using the HCC or EHCC algorithms for determining Hopping Patterns is enabled. The capability is disabled, otherwise. The default value of this attribute is FALSE.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

dot11HopAlgorithmAdopted 1.2.840.10036.4.4.1.12
This attribute, indicates which of the algorithms will be used to generate the Hopping Patterns. Valid values are: 1 - hopping patterns as defined in clause 14 2 - hop index method (with or without table) 3 - HCC/EHCC method
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER crnt(1), hopindex(2), hcc(3)  

dot11RandomTableFlag 1.2.840.10036.4.4.1.13
This attribute, indicates that a Random Table is present when the value is True. When the value is False it indicates that a Random Table is not present and that the hop index method is to be used to determine the hopping sequence. The default value of this attribute is True.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

dot11NumberofHoppingSets 1.2.840.10036.4.4.1.14
The Number of Sets field indicates the total number of sets within the hopping patterns.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

dot11HopModulus 1.2.840.10036.4.4.1.15
The number of allowed channels for the hopping set. This is defined by the governing regulatory agency for the country code of the country in which this device is operating.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

dot11HopOffset 1.2.840.10036.4.4.1.16
The next position in the hopping set.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

dot11PhyDSSSTable 1.2.840.10036.4.5
Entry of attributes for dot11PhyDSSSEntry. Implemented as a table indexed on ifIndex allow for multiple instances on an Agent.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Dot11PhyDSSSEntry

dot11PhyDSSSEntry 1.2.840.10036.4.5.1
An entry in the dot11PhyDSSSEntry Table. ifIndex - Each IEEE 802.11 interface is represented by an ifEntry. Interface tables in this MIB module are indexed by ifIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  Dot11PhyDSSSEntry  

dot11CurrentChannel 1.2.840.10036.4.5.1.1
The current operating frequency channel of the DSSS PHY. Valid channel numbers are as defined in 15.4.6.2
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..14  

dot11CCAModeSupported 1.2.840.10036.4.5.1.2
dot11CCAModeSupported is a bit-significant value, representing all of the CCA modes supported by the PHY. Valid values are: energy detect only (ED_ONLY) = 01, carrier sense only (CS_ONLY) = 02, carrier sense and energy detect (ED_and_CS)= 04 or the logical sum of any of these values. This attribute shall not be used to indicate the CCA modes supported by a higher rate extension PHY. Rather, the dot11HRCCAModeSupported attribute shall be used to indicate the CCA modes of the higher rate extension PHY.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..7  

dot11CurrentCCAMode 1.2.840.10036.4.5.1.3
The current CCA method in operation. Valid values are: energy detect only (edonly) = 01, carrier sense only (csonly) = 02, carrier sense and energy detect (edandcs)= 04 carrier sense with timer (cswithtimer)= 08 high rate carrier sense and energy detect (hrcsanded)=16.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER edonly(1), csonly(2), edandcs(4), cswithtimer(8), hrcsanded(16)  

dot11EDThreshold 1.2.840.10036.4.5.1.4
The current Energy Detect Threshold being used by the DSSS PHY.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

dot11PhyIRTable 1.2.840.10036.4.6
Group of attributes for dot11PhyIRTable. Implemented as a table indexed on ifIndex to allow for multiple instances on an Agent.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Dot11PhyIREntry

dot11PhyIREntry 1.2.840.10036.4.6.1
An entry in the dot11PhyIR Table. ifIndex - Each IEEE 802.11 interface is represented by an ifEntry. Interface tables in this MIB module are indexed by ifIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  Dot11PhyIREntry  

dot11CCAWatchdogTimerMax 1.2.840.10036.4.6.1.1
This parameter, together with CCAWatchdogCountMax, determines when energy detected in the channel can be ignored.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

dot11CCAWatchdogCountMax 1.2.840.10036.4.6.1.2
This parameter, together with CCAWatchdogTimerMax, determines when energy detected in the channel can be ignored.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

dot11CCAWatchdogTimerMin 1.2.840.10036.4.6.1.3
The minimum value to which CCAWatchdogTimerMax can be set.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

dot11CCAWatchdogCountMin 1.2.840.10036.4.6.1.4
The minimum value to which CCAWatchdogCount can be set.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

dot11RegDomainsSupportedTable 1.2.840.10036.4.7
There are different operational requirements dependent on the regulatory domain. This attribute list describes the regulatory domains the PLCP and PMD support in this implementation. Currently defined values and their corresponding Regulatory Domains are: FCC (USA) = X'10', DOC (Canada) = X'20', ETSI (most of Europe) = X'30', Spain = X'31', France = X'32', MKK (Japan) = X'40', Others = X'00'
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Dot11RegDomainsSupportedEntry

dot11RegDomainsSupportedEntry 1.2.840.10036.4.7.1
An entry in the dot11RegDomainsSupportedTable. ifIndex - Each IEEE 802.11 interface is represented by an ifEntry. Interface tables in this MIB module are indexed by ifIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  Dot11RegDomainsSupportedEntry  

dot11RegDomainsSupportedIndex 1.2.840.10036.4.7.1.1
The auxiliary variable used to identify instances of the columnar objects in the RegDomainsSupport Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

dot11RegDomainsSupportedValue 1.2.840.10036.4.7.1.2
There are different operational requirements dependent on the regulatory domain. This attribute list describes the regulatory domains the PLCP and PMD support in this implementation. Currently defined values and their corresponding Regulatory Domains are: FCC (USA) = X'10', DOC (Canada) = X'20', ETSI (most of Europe) = X'30', Spain = X'31', France = X'32', MKK (Japan) = X'40'
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER fcc(16), doc(32), etsi(48), spain(49), france(50), mkk(64)  

dot11AntennasListTable 1.2.840.10036.4.8
This table represents the list of antennae. An antenna can be marked to be capable of transmitting, receiving, and/or for participation in receive diversity. Each entry in this table represents a single antenna with its properties. The maximum number of antennae that can be contained in this table is 255.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Dot11AntennasListEntry

dot11AntennasListEntry 1.2.840.10036.4.8.1
An entry in the dot11AntennasListTable, representing the properties of a single antenna. ifIndex - Each IEEE 802.11 interface is represented by an ifEntry. Interface tables in this MIB module are indexed by ifIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  Dot11AntennasListEntry  

dot11AntennaListIndex 1.2.840.10036.4.8.1.1
The unique index of an antenna which is used to identify the columnar objects in the dot11AntennasList Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..255  

dot11SupportedTxAntenna 1.2.840.10036.4.8.1.2
When true, this object indicates that the antenna represented by dot11AntennaIndex can be used as a transmit antenna.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

dot11SupportedRxAntenna 1.2.840.10036.4.8.1.3
When true, this object indicates that the antenna represented by the dot11AntennaIndex xan be used as a receive antenna.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

dot11DiversitySelectionRx 1.2.840.10036.4.8.1.4
When true, this object indicates that the antenna represented by dot11AntennaIndex can be used for receive diversity. This object may only be true if the antenna can be used as a receive antenna, as indicated by dot11SupportedRxAntenna.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

dot11SupportedDataRatesTxTable 1.2.840.10036.4.9
The Transmit bit rates supported by the PLCP and PMD, represented by a count from X'02-X'7f, corresponding to data rates in increments of 500kbit/s from 1 Mbit/s to 63.5 Mbit/s subject to limitations of each individual PHY.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Dot11SupportedDataRatesTxEntry

dot11SupportedDataRatesTxEntry 1.2.840.10036.4.9.1
An Entry (conceptual row) in the dot11SupportedDataRatesTx Table. ifIndex - Each IEEE 802.11 interface is represented by an ifEntry. Interface tables in this MIB module are indexed by ifIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  Dot11SupportedDataRatesTxEntry  

dot11SupportedDataRatesTxIndex 1.2.840.10036.4.9.1.1
Index object which identifies which data rate to access. Range is 1..8.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..8  

dot11SupportedDataRatesTxValue 1.2.840.10036.4.9.1.2
The Transmit bit rates supported by the PLCP and PMD, represented by a count from X'02-X'7f, corresponding to data rates in increments of 500kbit/s from 1 Mbit/s to 63.5 Mbit/s subject to limitations of each individual PHY.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 2..127  

dot11SupportedDataRatesRxTable 1.2.840.10036.4.10
The receive bit rates supported by the PLCP and PMD, represented by a count from X'002-X'7f, corresponding to data rates in increments of 500kbit/s from 1 Mbit/s to 63.5 Mbit/s.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Dot11SupportedDataRatesRxEntry

dot11SupportedDataRatesRxEntry 1.2.840.10036.4.10.1
An Entry (conceptual row) in the dot11SupportedDataRatesRx Table. ifIndex - Each IEEE 802.11 interface is represented by an ifEntry. Interface tables in this MIB module are indexed by ifIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  Dot11SupportedDataRatesRxEntry  

dot11SupportedDataRatesRxIndex 1.2.840.10036.4.10.1.1
Index object which identifies which data rate to access. Range is 1..8.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..8  

dot11SupportedDataRatesRxValue 1.2.840.10036.4.10.1.2
The receive bit rates supported by the PLCP and PMD, represented by a count from X'02-X'7f, corresponding to data rates in increments of 500kbit/s from 1 Mbit/s to 63.5 Mbit/s.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 2..127  

dot11PhyOFDMTable 1.2.840.10036.4.11
Group of attributes for dot11PhyOFDMTable. Implemented as a table indexed on ifindex to allow for multiple instances on an Agent.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Dot11PhyOFDMEntry

dot11PhyOFDMEntry 1.2.840.10036.4.11.1
An entry in the dot11PhyOFDM Table. ifIndex - Each IEEE 802.11 interface is represented by an ifEntry. Interface tables in this MIB module are indexed by ifIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  Dot11PhyOFDMEntry  

dot11CurrentFrequency 1.2.840.10036.4.11.1.1
The number of the current operating frequency channel of the OFDM PHY.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..99  

dot11TIThreshold 1.2.840.10036.4.11.1.2
The Threshold being used to detect a busy medium (frequency). CCA shall report a busy medium upon detecting the RSSI above this threshold.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

dot11FrequencyBandsSupported 1.2.840.10036.4.11.1.3
The capability of the OFDM PHY implementation to operate in the three U-NII bands. Coded as an integer value of a three bit field as follows: bit 0 .. capable of operating in the lower (5.15-5.25 GHz) U-NII band bit 1 .. capable of operating in the middle (5.25-5.35 GHz) U-NII band bit 2 .. capable of operating in the upper (5.725-5.825 GHz) U-NII band For example, for an implementation capable of operating in the lower and mid bands this attribute would take the value 3.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..7  

dot11PhyHRDSSSTable 1.2.840.10036.4.12
Entry of attributes for dot11PhyHRDSSSEntry. Implemented as a table indexed on ifIndex to allow for multiple instances on an Agent.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Dot11PhyHRDSSSEntry

dot11PhyHRDSSSEntry 1.2.840.10036.4.12.1
An entry in the dot11PhyHRDSSSEntry Table. ifIndex - Each IEEE 802.11 interface is represented by an ifEntry. Interface tables in this MIB module are indexed by ifIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  Dot11PhyHRDSSSEntry  

dot11ShortPreambleOptionImplemented 1.2.840.10036.4.12.1.1
This attribute, when true, shall indicate that the short preamble option as defined in subclause 18.2.2.2 is implemented. The default value of this attribute shall be false.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

dot11PBCCOptionImplemented 1.2.840.10036.4.12.1.2
This attribute, when true, shall indicate that the PBCC modulation option as defined in subclause 18.4.6.6 is implemented. The default value of this attribute shall be false.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

dot11ChannelAgilityPresent 1.2.840.10036.4.12.1.3
This attribute indicates that the PHY is capable of channel agility.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

dot11ChannelAgilityEnabled 1.2.840.10036.4.12.1.4
This attribute indicates that the PHY channel agility functionality is enabled.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

dot11HRCCAModeSupported 1.2.840.10036.4.12.1.5
dot11HRCCAModeSupported is a bit-significant value, representing all of the CCA modes supported by the PHY. Valid values are: energy detect only (ED_ONLY) = 01, carrier sense only (CS_ONLY) = 02, carrier sense and energy detect (ED_and_CS)= 04, carrier sense with timer (CS_and_Timer)= 08, high rate carrier sense and energy detect (HRCS_and_ED)= 16 or the logical sum of any of these values. In the high rate extension PHY, this attribute shall be used in preference to the dot11CCAModeSupported attribute.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..31  

dot11HoppingPatternTable 1.2.840.10036.4.13
The (conceptual) table of attributes necessary for a frequency hopping implementation to be able to create the hopping sequences necessary to operate in the subband for the associated domain country string.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Dot11HoppingPatternEntry

dot11HoppingPatternEntry 1.2.840.10036.4.13.1
An entry (conceptual row) in the Hopping Pattern Table that indicates the random hopping sequence to be followed. IfIndex - Each IEEE 802.11 interface is represented by an ifEntry. Interface tables in this MIB are indexed by ifIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  Dot11HoppingPatternEntry  

dot11HoppingPatternIndex 1.2.840.10036.4.13.1.1
The auxiliary variable used to identify instances of the columnar objects in the Hopping Pattern Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

dot11RandomTableFieldNumber 1.2.840.10036.4.13.1.2
This attribute shall indicate the value of the starting channel number in the hopping sequence of the subband for the associated domain country string. The default value of this attribute shall be zero.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

dot11Conformance 1.2.840.10036.5
OBJECT IDENTIFIER    

dot11Groups 1.2.840.10036.5.1
OBJECT IDENTIFIER    

dot11Compliances 1.2.840.10036.5.2
OBJECT IDENTIFIER    

dot11Compliance 1.2.840.10036.5.2.1
The compliance statement for SNMPv2 entities that implement the IEEE 802.11 MIB.
Status: current Access: read-write
MODULE-COMPLIANCE    

dot11SMTbase 1.2.840.10036.5.1.1
The SMT object class provides the necessary support at the STA to manage the processes in the STA such that the STA may work cooperatively as a part of an IEEE 802.11 network.
Status: deprecated Access: read-write
OBJECT-GROUP    

dot11SMTprivacy 1.2.840.10036.5.1.2
The SMTPrivacy package is a set of attributes that shall be present if WEP is implemented in the STA.
Status: current Access: read-write
OBJECT-GROUP    

dot11MACbase 1.2.840.10036.5.1.3
The MAC object class provides the necessary support for the access control, generation, and verification of frame check sequences (FCSs), and proper delivery of valid data to upper layers.
Status: current Access: read-write
OBJECT-GROUP    

dot11MACStatistics 1.2.840.10036.5.1.4
The MACStatistics package provides extended statistical information on the operation of the MAC. This package is completely optional.
Status: current Access: read-write
OBJECT-GROUP    

dot11ResourceTypeID 1.2.840.10036.5.1.5
Attributes used to identify a STA, its manufacturer, and various product names and versions.
Status: current Access: read-write
OBJECT-GROUP    

dot11SmtAuthenticationAlgorithms 1.2.840.10036.5.1.6
Authentication Algorithm Table.
Status: current Access: read-write
OBJECT-GROUP    

dot11PhyOperationComplianceGroup 1.2.840.10036.5.1.7
PHY layer operations attributes.
Status: current Access: read-write
OBJECT-GROUP    

dot11PhyAntennaComplianceGroup 1.2.840.10036.5.1.8
Attributes for Data Rates for IEEE 802.11.
Status: current Access: read-write
OBJECT-GROUP    

dot11PhyTxPowerComplianceGroup 1.2.840.10036.5.1.9
Attributes for Control and Management of transmit power.
Status: current Access: read-write
OBJECT-GROUP    

dot11PhyFHSSComplianceGroup 1.2.840.10036.5.1.10
Attributes that configure the Frequency Hopping for IEEE 802.11.
Status: current Access: read-write
OBJECT-GROUP    

dot11PhyDSSSComplianceGroup 1.2.840.10036.5.1.11
Attributes that configure the DSSS for IEEE 802.11.
Status: current Access: read-write
OBJECT-GROUP    

dot11PhyIRComplianceGroup 1.2.840.10036.5.1.12
Attributes that configure the baseband IR for IEEE 802.11.
Status: current Access: read-write
OBJECT-GROUP    

dot11PhyRegDomainsSupportGroup 1.2.840.10036.5.1.13
Attributes that specify the supported Regulation Domains.
Status: current Access: read-write
OBJECT-GROUP    

dot11PhyAntennasListGroup 1.2.840.10036.5.1.14
Attributes that specify the supported Regulation Domains.
Status: current Access: read-write
OBJECT-GROUP    

dot11PhyRateGroup 1.2.840.10036.5.1.15
Attributes for Data Rates for IEEE 802.11.
Status: current Access: read-write
OBJECT-GROUP    

dot11CountersGroup 1.2.840.10036.5.1.16
Attributes from the dot11CountersGroup that are not described in the dot11MACStatistics group. These objects are mandatory.
Status: current Access: read-write
OBJECT-GROUP    

dot11NotificationGroup 1.2.840.10036.5.1.17
IEEE 802.11 notifications
Status: current Access: read-write
NOTIFICATION-GROUP    

dot11SMTbase2 1.2.840.10036.5.1.18
The SMTbase2 object class provides the necessary support at the STA to manage the processes in the STA such that the STA may work cooperatively as a part of an IEEE 802.11 network.
Status: current Access: read-write
OBJECT-GROUP    

dot11PhyOFDMComplianceGroup 1.2.840.10036.5.1.19
Attributes that configure the OFDM for IEEE 802.11.
Status: current Access: read-write
OBJECT-GROUP    

dot11SMTbase3 1.2.840.10036.5.1.20
The SMTbase3 object class provides the necessary support at the STA to manage the processes in the STA such that the STA may work cooperatively as a part of an IEEE 802.11 network, when the STA is capable of multi-domain operation. This object group should be implemented when the multi-domain capability option is implemented.
Status: current Access: read-write
OBJECT-GROUP    

dot11MultiDomainCapabilityGroup 1.2.840.10036.5.1.21
The dot11MultiDomainCapabilityGroup object class provides the objects necessary to manage the channels usable by a STA, when the multi-domain capability option is implemented.
Status: current Access: read-write
OBJECT-GROUP    

dot11PhyFHSSComplianceGroup2 1.2.840.10036.5.1.22
Attributes that configure the Frequency Hopping for IEEE 802.11 when multi-domain capability option is implemented.
Status: current Access: read-write
OBJECT-GROUP    

dot11PhyHRDSSSComplianceGroup 1.2.840.10036.5.1.23
Attributes that configure the HRDSSS for IEEE 802.11.
Status: current Access: read-write
OBJECT-GROUP