ENTERASYS-MAU-MIB-EXT-MIB

File: ENTERASYS-MAU-MIB-EXT-MIB.mib (9398 bytes)

Imported modules

SNMPv2-SMI SNMPv2-CONF MAU-MIB
ENTERASYS-MIB-NAMES

Imported symbols

MODULE-IDENTITY OBJECT-TYPE MODULE-COMPLIANCE
OBJECT-GROUP ifMauIfIndex etsysModules

Defined Types

EtsysIfMauExtMDIXEntry  
SEQUENCE    
  etsysIfMauExtMDIXStatus INTEGER

EtsysIfMauExtMasterSlaveEntry  
SEQUENCE    
  etsysIfMauExtMasterSlaveStatus INTEGER

Defined Values

etsysMauMibExtMIB 1.3.6.1.4.1.5624.1.2.59
This MIB module defines a portion of the SNMP MIB under the Enterasys Networks enterprise OID that provide extensions to the industry standard MAU-MIB.
MODULE-IDENTITY    

etsysMauMibExtObjects 1.3.6.1.4.1.5624.1.2.59.1
OBJECT IDENTIFIER    

etsysMauMibExtBasic 1.3.6.1.4.1.5624.1.2.59.1.1
OBJECT IDENTIFIER    

etsysIfMauExtMDIXTable 1.3.6.1.4.1.5624.1.2.59.1.1.1
A table of management information used to control the MDI crossover and extend the base ifMauTable defined in RFC3636.
OBJECT-TYPE    
  SEQUENCE OF  
    EtsysIfMauExtMDIXEntry

etsysIfMauExtMDIXEntry 1.3.6.1.4.1.5624.1.2.59.1.1.1.1
An entry in the table containing MDI crossover management information per MAU interface.
OBJECT-TYPE    
  EtsysIfMauExtMDIXEntry  

etsysIfMauExtMDIXStatus 1.3.6.1.4.1.5624.1.2.59.1.1.1.1.1
The value of this object determines the MDI crossover state of the port. A value of auto(1) enables the port to automatically detect and activate the appropriate rx/tx crossover configuration. A value of mdi(3) will force the port to operate as a crossover port, which is the standard wiring configuration for a switch port. A value of mdix(2) will force the port to operate as a straight-through port, with no internal rx/tx crossover. This object is independent of and not affected by auto-negotiation setting.
OBJECT-TYPE    
  INTEGER auto(1), mdix(2), mdi(3)  

etsysIfMauExtMasterSlaveTable 1.3.6.1.4.1.5624.1.2.59.1.1.2
********* THIS TABLE IS DEPRECATED ********** A table of management information used to control the master/slave configuration and extend the base ifMauTable defined in RFC3636.
OBJECT-TYPE    
  SEQUENCE OF  
    EtsysIfMauExtMasterSlaveEntry

etsysIfMauExtMasterSlaveEntry 1.3.6.1.4.1.5624.1.2.59.1.1.2.1
An entry in the table containing master/slave management information per MAU interface.
OBJECT-TYPE    
  EtsysIfMauExtMasterSlaveEntry  

etsysIfMauExtMasterSlaveStatus 1.3.6.1.4.1.5624.1.2.59.1.1.2.1.1
If auto-negotiation is not enabled, the value of this object determines the master/slave state for this MAU. A value of master(1) will force the port to operate as a master. A value of slave(2) will force the port to operate as a slave.
OBJECT-TYPE    
  INTEGER master(1), slave(2)  

etsysMauMibExtConformance 1.3.6.1.4.1.5624.1.2.59.2
OBJECT IDENTIFIER    

etsysMauMibExtGroups 1.3.6.1.4.1.5624.1.2.59.2.1
OBJECT IDENTIFIER    

etsysMauMibExtCompliances 1.3.6.1.4.1.5624.1.2.59.2.2
OBJECT IDENTIFIER    

etsysMauMibExtMDIXGroup 1.3.6.1.4.1.5624.1.2.59.2.1.1
The group that controls the MDI transmit and receive pairs crossover for a given MAU interface.
OBJECT-GROUP    

etsysMauMibExtMasterSlaveGroup 1.3.6.1.4.1.5624.1.2.59.2.1.2
******** THIS CONFORMANCE IS DEPRECATED ******** The group that controls the master/slave configuration for a given MAU interface.
OBJECT-GROUP    

etsysMauMibExtMDIXCompliance 1.3.6.1.4.1.5624.1.2.59.2.2.1
The compliance statement for devices that support the MDI crossover functionality for MAU interfaces.
MODULE-COMPLIANCE    

etsysMauMibExtMasterSlaveCompliance 1.3.6.1.4.1.5624.1.2.59.2.2.2
******** THIS COMPLIANCE IS DEPRECATED ******** The compliance statement for devices that support the master/slave configuration functionality for MAU interfaces.
MODULE-COMPLIANCE