ENTERASYS-IEEE8021-BRIDGE-MIB-EXT-MIB

File: ENTERASYS-IEEE8021-BRIDGE-MIB-EXT-MIB.mib (9250 bytes)

Imported modules

SNMPv2-SMI	SNMPv2-CONF	P-BRIDGE-MIB
IEEE8021-TC-MIB	IEEE8021-BRIDGE-MIB	ENTERASYS-MIB-NAMES

Imported symbols

MODULE-IDENTITY	OBJECT-TYPE	MODULE-COMPLIANCE
OBJECT-GROUP	EnabledStatus	IEEE8021PbbComponentIdentifier
ieee8021BridgeBasePort	ieee8021BridgeBasePortEntry	etsysModules

Defined Types

EtsysIeee8021BridgeBasePortEntry
SEQUENCE
	etsys8021BridgePortComponentId	IEEE8021PbbComponentIdentifier

EtsysIeee8021BridgeMibExtMrpEntry
SEQUENCE
	etsysIeee8021BridgeMibExtMrpPeriodicEnabled	EnabledStatus

Defined Values

etsysIeee8021BridgeMibExtMIB		1.3.6.1.4.1.5624.1.2.90
This MIB module defines a portion of the SNMP MIB under the Enterasys Networks enterprise OID pertaining to proprietary extensions to the IEEE8021-BRIDGE-MIB.
MODULE-IDENTITY

etsysIeee8021BridgeMibExtObjects		1.3.6.1.4.1.5624.1.2.90.1
OBJECT IDENTIFIER

etsysIeee8021BridgeMibExtConformance		1.3.6.1.4.1.5624.1.2.90.2
OBJECT IDENTIFIER

etsysIeee8021BridgeBase		1.3.6.1.4.1.5624.1.2.90.1.1
OBJECT IDENTIFIER

etsysIeee8021BridgeBaseMode		1.3.6.1.4.1.5624.1.2.90.1.1.1
Indicates the mode of operation of this bridge. The following operation modes are possible: customerBridge(1) - Indicates the bridge is a MAC Bridge as specified by IEEE Std 802.1D or a VLAN Bridge as specified by IEEE Std 802.1Q. providerBridge(2) - Indicates the bridge is an S-VLAN bridge or Provider Edge Bridge. providerBackboneBridge(3) - Indicates the bridge is a Backbone Core Bridge or a Backbone Edge Bridge.
OBJECT-TYPE
	INTEGER	customerBridge(1), providerBridge(2), providerBackboneBridge(3)

etsysIeee8021BridgeBasePortTable		1.3.6.1.4.1.5624.1.2.90.1.1.2
This table contains generic information about every bridge port that is associated with this bridge. It extends the information provided by the ieee8021BridgeBasePortTable.
OBJECT-TYPE
	SEQUENCE OF
		EtsysIeee8021BridgeBasePortEntry

etsysIeee8021BridgeBasePortEntry		1.3.6.1.4.1.5624.1.2.90.1.1.2.1
A list of objects containing information for each port of the bridge.
OBJECT-TYPE
	EtsysIeee8021BridgeBasePortEntry

etsys8021BridgePortComponentId		1.3.6.1.4.1.5624.1.2.90.1.1.2.1.1
The componentId a bridge port belongs to or is assigned to.
OBJECT-TYPE
	IEEE8021PbbComponentIdentifier

etsysIeee8021BridgeMibExtMrpBranch		1.3.6.1.4.1.5624.1.2.90.1.2
OBJECT IDENTIFIER

etsysIeee8021BridgeMibExtMrpTable		1.3.6.1.4.1.5624.1.2.90.1.2.1
A table of bridge port MRP timer control information.
OBJECT-TYPE
	SEQUENCE OF
		EtsysIeee8021BridgeMibExtMrpEntry

etsysIeee8021BridgeMibExtMrpEntry		1.3.6.1.4.1.5624.1.2.90.1.2.1.1
MRP timer control information for a bridge port.
OBJECT-TYPE
	EtsysIeee8021BridgeMibExtMrpEntry

etsysIeee8021BridgeMibExtMrpPeriodicEnabled		1.3.6.1.4.1.5624.1.2.90.1.2.1.1.1
The MRP periodic transmission enabled status. The value of this object MUST be retained across re-initializations of the management system.
OBJECT-TYPE
	EnabledStatus

etsysIeee8021BridgeMibExtGroups		1.3.6.1.4.1.5624.1.2.90.2.1
OBJECT IDENTIFIER

etsysIeee8021BridgeMibExtCompliances		1.3.6.1.4.1.5624.1.2.90.2.2
OBJECT IDENTIFIER

etsysIeee8021BridgeMibExtBaseModeGroup		1.3.6.1.4.1.5624.1.2.90.2.1.1
A collection of objects providing information about the mode of operation of the bridge.
OBJECT-GROUP

etsysIeee8021BridgeMibExtBasePortGroup		1.3.6.1.4.1.5624.1.2.90.2.1.2
A collection of objects providing information about the relation between bridge port and componentId.
OBJECT-GROUP

etsysIeee8021BridgeMibExtMrpGroup		1.3.6.1.4.1.5624.1.2.90.2.1.3
A collection of objects providing port level control and status information for MRP operation
OBJECT-GROUP

etsysIeee8021BridgeMibExtCompliance		1.3.6.1.4.1.5624.1.2.90.2.2.1
This group is REQUIRED for devices supporting IEEE8021-BRIDGE-MIB.
MODULE-COMPLIANCE

etsysIeee8021BridgeMibExtMrpCompliance		1.3.6.1.4.1.5624.1.2.90.2.2.2
This group is REQUIRED for devices supporting IEEE8021-BRIDGE-MIB.
MODULE-COMPLIANCE

Generation date: November 19, 2018, 19:58:13, Copyright © 2007 - 2018 - Circitor