ELTEX-MES-PHYSICAL-DESCRIPTION-MIB

File: ELTEX-MES-PHYSICAL-DESCRIPTION-MIB.mib (11145 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC MAU-MIB
IF-MIB ELTEX-MES RADLAN-Physicaldescription-MIB

Imported symbols

OBJECT-TYPE MODULE-IDENTITY TimeTicks
NOTIFICATION-TYPE Integer32 DisplayString
PhysAddress RowStatus TruthValue
JackType InterfaceIndexOrZero ifIndex
InterfaceIndex eltMes rlPhdUnitGenParamEntry
rlCascadeEntry

Defined Types

EltPhdTransceiverInfoEntry  
SEQUENCE    
  eltPhdTransceiverInfoConnectorType INTEGER
  eltPhdTransceiverInfoType INTEGER
  eltPhdTransceiverInfoComplianceCode OCTET STRING
  eltPhdTransceiverInfoWaveLength Integer32
  eltPhdTransceiverInfoVendorName OCTET STRING
  eltPhdTransceiverInfoSerialNumber OCTET STRING
  eltPhdTransceiverInfoFiberDiameterType INTEGER
  eltPhdTransceiverInfoTransferDistance Integer32
  eltPhdTransceiverInfoDiagnostic TruthValue

EltPhdTransceiverThresholdEntry  
SEQUENCE    
  eltPhdTransceiverThresholdType INTEGER
  eltPhdTransceiverThresholdAction INTEGER
  eltPhdTransceiverThresholdHighAlarm INTEGER
  eltPhdTransceiverThresholdHighWarning INTEGER
  eltPhdTransceiverThresholdLowWarning INTEGER
  eltPhdTransceiverThresholdLowAlarm INTEGER

EltPhdUnitGenParamEntry  
SEQUENCE    
  eltPhdUnitGenParamCommitHash DisplayString

EltCascadeEntry  
SEQUENCE    
  eltCascadeLastChange TimeTicks

Defined Values

eltMesPhysicalDescription 1.3.6.1.4.1.35265.1.23.53
The private MIB module definition for physical device configuration and information.
MODULE-IDENTITY    

eltMesPhdTransceiver 1.3.6.1.4.1.35265.1.23.53.1
OBJECT IDENTIFIER    

eltPhdTransceiverInfoTable 1.3.6.1.4.1.35265.1.23.53.1.1
This table show the information of transceiver on interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EltPhdTransceiverInfoEntry

eltPhdTransceiverInfoEntry 1.3.6.1.4.1.35265.1.23.53.1.1.1
The entry of the eltPhdTransceiverInfoTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  EltPhdTransceiverInfoEntry  

eltPhdTransceiverInfoConnectorType 1.3.6.1.4.1.35265.1.23.53.1.1.1.1
Connector type of the interface.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unknown(0), sc(1), fibre-ch-st1(2), fibre-ch-st2(3), bnc-tnc(4), fibre-ch-coaxial-headers(5), fibrejack(6), lc(7), mt-rj(8), mu(9), sg(10), optical-pigtail(11), mpo-parallel-optic(12), hssdc-ii(32), copper-pigtail(33), rj45(34), unallocated(127), vendorspec(255)  

eltPhdTransceiverInfoType 1.3.6.1.4.1.35265.1.23.53.1.1.1.2
Type of the interface, such as SFP/XFP/GBIC.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unknown(0), gbic(1), sff(2), sfp-sfpplus(3), xbi-300-pin(4), xenpak(5), xfp(6), xff(7), xfp-e(8), xpak(9), x2(10), dwdm-sfp(11), qsfp(12), reserved(127), vendorspec(255)  

eltPhdTransceiverInfoComplianceCode 1.3.6.1.4.1.35265.1.23.53.1.1.1.3
Compliance code read from the transceiver.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

eltPhdTransceiverInfoWaveLength 1.3.6.1.4.1.35265.1.23.53.1.1.1.4
Wave length of the interface, measured in nanometer.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

eltPhdTransceiverInfoVendorName 1.3.6.1.4.1.35265.1.23.53.1.1.1.5
Vendor name of the interface.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

eltPhdTransceiverInfoSerialNumber 1.3.6.1.4.1.35265.1.23.53.1.1.1.6
Serial number of the interface.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

eltPhdTransceiverInfoFiberDiameterType 1.3.6.1.4.1.35265.1.23.53.1.1.1.7
The diameter of the fiber, measured in micron. fiber9 - 9 micron multi-mode fiber fiber50 - 50 micron multi-mode fiber fiber625 - 62.5 micron multi-mode fiber copper - copper cable.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER fiber9(1), fiber50(2), fiber625(3), copper(4), unknown(65535)  

eltPhdTransceiverInfoTransferDistance 1.3.6.1.4.1.35265.1.23.53.1.1.1.8
The maximal distance which the interface could transmit, measured in meter.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

eltPhdTransceiverInfoDiagnostic 1.3.6.1.4.1.35265.1.23.53.1.1.1.9
Indicating whether the digital diagnostic monitoring function is supported or not.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

eltPhdTransceiverThresholdTable 1.3.6.1.4.1.35265.1.23.53.1.2
This table contains the threshold information of transceiver.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EltPhdTransceiverThresholdEntry

eltPhdTransceiverThresholdEntry 1.3.6.1.4.1.35265.1.23.53.1.2.1
The entry of the eltPhdTransceiverThresholdTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  EltPhdTransceiverThresholdEntry  

eltPhdTransceiverThresholdType 1.3.6.1.4.1.35265.1.23.53.1.2.1.1
A value indicating the threshold to configure. temperature - degree (Celsius) -127-127, voltage - microVolt 0-6550000, current - microAmper 0-131000, output power or input power - microWatt 0-6553
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER temperature(0), supply(1), txBias(2), txOutput(3), rxOpticalPower(4)  

eltPhdTransceiverThresholdAction 1.3.6.1.4.1.35265.1.23.53.1.2.1.2
What action to perform when value is bad.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(0), log(1), send-trap(2)  

eltPhdTransceiverThresholdHighAlarm 1.3.6.1.4.1.35265.1.23.53.1.2.1.3
See eltPhdTransceiverThresholdType for details
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

eltPhdTransceiverThresholdHighWarning 1.3.6.1.4.1.35265.1.23.53.1.2.1.4
See eltPhdTransceiverThresholdType for details
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

eltPhdTransceiverThresholdLowWarning 1.3.6.1.4.1.35265.1.23.53.1.2.1.5
See eltPhdTransceiverThresholdType for details
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

eltPhdTransceiverThresholdLowAlarm 1.3.6.1.4.1.35265.1.23.53.1.2.1.6
See eltPhdTransceiverThresholdType for details
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

eltPhdTransceiverThresholdTimer 1.3.6.1.4.1.35265.1.23.53.1.3
Time between 2 generation of snmp/syslog alarm/warning messages in seconds (30-3600) Timer value must be in multiples of 10.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

eltPhdUnitGenParamTable 1.3.6.1.4.1.35265.1.23.53.2
For each module (board) there is an entry describing it in this module
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EltPhdUnitGenParamEntry

eltPhdUnitGenParamEntry 1.3.6.1.4.1.35265.1.23.53.2.1
This table augments existing RADLAN table rlPhdUnitGenParamTable
Status: current Access: not-accessible
OBJECT-TYPE    
  EltPhdUnitGenParamEntry  

eltPhdUnitGenParamCommitHash 1.3.6.1.4.1.35265.1.23.53.2.1.1
Hash of current commit.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

eltCascadeTable 1.3.6.1.4.1.35265.1.23.53.3
This table augments existing RADLAN table rlCascadeTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EltCascadeEntry

eltCascadeEntry 1.3.6.1.4.1.35265.1.23.53.3.1
An entry of this table specifies a cascaded link information in a unit
Status: current Access: not-accessible
OBJECT-TYPE    
  EltCascadeEntry  

eltCascadeLastChange 1.3.6.1.4.1.35265.1.23.53.3.1.1
The value of sysUpTime at the time the cascade interface entered its current operational state.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor