CXPCM-MIB

File: CXPCM-MIB.mib (6394 bytes)

Imported modules

RFC1155-SMI RFC-1212 CXProduct-SMI

Imported symbols

Counter OBJECT-TYPE cxPCM
SapIndex

Defined Types

ChannelIndex  
INTEGER 1..31    

PcmSapEntry  
SEQUENCE    
  pcmSapLinkNumber SapIndex
  pcmSapChannelNumber ChannelIndex
  pcmSapChannelState INTEGER
  pcmSapRxPacket Counter
  pcmSapTxPacket Counter
  pcmSapTxDesync Counter
  pcmSapTxNotReady Counter
  pcmSapRxBusy Counter
  pcmSapTxUnderrun Counter

PcmDebugEntry  
SEQUENCE    
  pcmDebugLinkNumber SapIndex
  pcmDebugLoopInfo INTEGER

Defined Values

pcmSapTable 1.3.6.1.4.1.495.2.1.6.63.40
A table containing configuration, controls, status and statistics information about each PCM module layer service access point.
OBJECT-TYPE    
  SEQUENCE OF  
    PcmSapEntry

pcmSapEntry 1.3.6.1.4.1.495.2.1.6.63.40.1
The parameters for a specific service access point.
OBJECT-TYPE    
  PcmSapEntry  

pcmSapLinkNumber 1.3.6.1.4.1.495.2.1.6.63.40.1.1
Indicates the link number associated with this SAP. Range of Values: 1-2 for DI600 (port) Default Value: none
OBJECT-TYPE    
  SapIndex  

pcmSapChannelNumber 1.3.6.1.4.1.495.2.1.6.63.40.1.2
Indicates the B channel associated with this SAP. Range of Values: 1-24 for T1 1-31 for E1 Default Value: none
OBJECT-TYPE    
  ChannelIndex  

pcmSapChannelState 1.3.6.1.4.1.495.2.1.6.63.40.1.40
Indicates the current state of a voice configured B channel associated to this SAP. Options: down (1): A voice call is not established on this B channel. unbound (2): A voice call is established on this B channel. Default Value: none
OBJECT-TYPE    
  INTEGER down(1), up(2)  

pcmSapRxPacket 1.3.6.1.4.1.495.2.1.6.63.40.1.60
Indicates the total number of error-free PCM voice packets received by the link since statistics were last reset. Range of Values: 0-4, 294, 967, 295 Default Value: none
OBJECT-TYPE    
  Counter  

pcmSapTxPacket 1.3.6.1.4.1.495.2.1.6.63.40.1.61
Indicates the total number of PCM voice packets successfully transmitted by the link since statistics were last reset. Range of Values: 0-4, 294, 967, 295 Default Value: none
OBJECT-TYPE    
  Counter  

pcmSapTxDesync 1.3.6.1.4.1.495.2.1.6.63.40.1.62
Indicates the number of silence PCM voice packets sent when the voice application has no packet to send. Range of Values: 0-4, 294, 967, 295 Default Value: none
OBJECT-TYPE    
  Counter  

pcmSapTxNotReady 1.3.6.1.4.1.495.2.1.6.63.40.1.63
Indicates the number of reinitialization of this B channel due to a transmitter malfunction. Range of Values: 0-4, 294, 967, 295 Default Value: none
OBJECT-TYPE    
  Counter  

pcmSapRxBusy 1.3.6.1.4.1.495.2.1.6.63.40.1.64
Indicates the number of times that the receiver FIFO has been full. Range of Values: 0-4, 294, 967, 295 Default Value: none
OBJECT-TYPE    
  Counter  

pcmSapTxUnderrun 1.3.6.1.4.1.495.2.1.6.63.40.1.65
Indicates the number of times that the transmitter FIFO has been full. Range of Values: 0-4, 294, 967, 295 Default Value: none
OBJECT-TYPE    
  Counter  

pcmDebugTable 1.3.6.1.4.1.495.2.1.6.63.60
A table containing controls about each PCM module layer service access point.
OBJECT-TYPE    
  SEQUENCE OF  
    PcmDebugEntry

pcmDebugEntry 1.3.6.1.4.1.495.2.1.6.63.60.1
The parameters for a specific service access point.
OBJECT-TYPE    
  PcmDebugEntry  

pcmDebugLinkNumber 1.3.6.1.4.1.495.2.1.6.63.60.1.1
Indicates the link number associated with this SAP. Range of Values: 1-2 for DI600 (port) Default Value: none
OBJECT-TYPE    
  SapIndex  

pcmDebugLoopInfo 1.3.6.1.4.1.495.2.1.6.63.60.1.80
This object displays the statistics relative to this PCM control block. When pcmSapDebugInfo is set to 1, it does nothing, 2 displays the link information concerning the looping informations and timings while 3 clears these statistics.
OBJECT-TYPE    
  INTEGER