ASCEND-MIBDS1ATMNET-MIB

File: ASCEND-MIBDS1ATMNET-MIB.mib (19164 bytes)

Imported modules

ASCEND-MIB RFC1155-SMI RFC-1212

Imported symbols

configuration IpAddress OBJECT-TYPE

Defined Types

DisplayString  
OCTET STRING    

Mibds1AtmNetworkProfileEntry  
SEQUENCE    
  ds1AtmNetworkProfile-Shelf-o INTEGER
  ds1AtmNetworkProfile-Slot-o INTEGER
  ds1AtmNetworkProfile-Item-o INTEGER
  ds1AtmNetworkProfile-Name DisplayString
  ds1AtmNetworkProfile-PhysicalAddress-Shelf INTEGER
  ds1AtmNetworkProfile-PhysicalAddress-Slot INTEGER
  ds1AtmNetworkProfile-PhysicalAddress-ItemNumber INTEGER
  ds1AtmNetworkProfile-Enabled INTEGER
  ds1AtmNetworkProfile-SparingMode INTEGER
  ds1AtmNetworkProfile-IgnoreLineup INTEGER
  ds1AtmNetworkProfile-LineConfig-FrameType INTEGER
  ds1AtmNetworkProfile-LineConfig-Encoding INTEGER
  ds1AtmNetworkProfile-LineConfig-NailedGroup INTEGER
  ds1AtmNetworkProfile-LineConfig-Loopback INTEGER
  ds1AtmNetworkProfile-LineConfig-ClockSource INTEGER
  ds1AtmNetworkProfile-LineConfig-ClockPriority INTEGER
  ds1AtmNetworkProfile-LineConfig-oFDL INTEGER
  ds1AtmNetworkProfile-LineConfig-SendCode INTEGER
  ds1AtmNetworkProfile-LineConfig-FrontEndType INTEGER
  ds1AtmNetworkProfile-LineConfig-LineLength INTEGER
  ds1AtmNetworkProfile-LineConfig-LineBuildOut INTEGER
  ds1AtmNetworkProfile-LineConfig-PcmMode INTEGER
  ds1AtmNetworkProfile-LineConfig-CosetEnabled INTEGER
  ds1AtmNetworkProfile-LineConfig-ScramblingEnabled INTEGER
  ds1AtmNetworkProfile-LineConfig-HecCorrectionEnabled INTEGER
  ds1AtmNetworkProfile-LineConfig-VpSwitchingVpi INTEGER
  ds1AtmNetworkProfile-LineConfig-ImaOptionConfig-TxlinkConfig-NeTxLid INTEGER
  ds1AtmNetworkProfile-LineConfig-ImaOptionConfig-TxlinkConfig-AddLinkCondTime INTEGER
  ds1AtmNetworkProfile-LineConfig-ImaOptionConfig-TxlinkConfig-LinkRecoveryType INTEGER
  ds1AtmNetworkProfile-LineConfig-ImaOptionConfig-TxlinkConfig-FaultClearingType INTEGER
  ds1AtmNetworkProfile-LineConfig-ImaOptionConfig-TxlinkConfig-FaultClearingTime INTEGER
  ds1AtmNetworkProfile-LineConfig-ImaOptionConfig-TxlinkConfig-Priority INTEGER
  ds1AtmNetworkProfile-LineConfig-ImaOptionConfig-RxlinkConfig-AddLinkCondTime INTEGER
  ds1AtmNetworkProfile-LineConfig-ImaOptionConfig-RxlinkConfig-LinkRecoveryType INTEGER
  ds1AtmNetworkProfile-LineConfig-ImaOptionConfig-RxlinkConfig-RecLinkCondTime INTEGER
  ds1AtmNetworkProfile-LineConfig-ImaOptionConfig-RxlinkConfig-RxLidLearningTime INTEGER
  ds1AtmNetworkProfile-LineConfig-ImaOptionConfig-RxlinkConfig-FaultClearingType INTEGER
  ds1AtmNetworkProfile-LineConfig-ImaOptionConfig-RxlinkConfig-FaultClearingTime INTEGER
  ds1AtmNetworkProfile-LineConfig-ImaOptionConfig-RxlinkConfig-InDefectIntTime INTEGER
  ds1AtmNetworkProfile-LineConfig-ImaOptionConfig-RxlinkConfig-OutDefectIntTime INTEGER
  ds1AtmNetworkProfile-LineConfig-ImaOptionConfig-RxlinkConfig-DefectRatio INTEGER
  ds1AtmNetworkProfile-LineConfig-StatusChangeTrapEnable INTEGER
  ds1AtmNetworkProfile-Action-o INTEGER

Defined Values

mibds1AtmNetworkProfile 1.3.6.1.4.1.529.23.25
OBJECT IDENTIFIER    

mibds1AtmNetworkProfileTable 1.3.6.1.4.1.529.23.25.1
A list of mibds1AtmNetworkProfile profile entries.
OBJECT-TYPE    
  SEQUENCE OF  
    Mibds1AtmNetworkProfileEntry

mibds1AtmNetworkProfileEntry 1.3.6.1.4.1.529.23.25.1.1
A mibds1AtmNetworkProfile entry containing objects that maps to the parameters of mibds1AtmNetworkProfile profile.
OBJECT-TYPE    
  Mibds1AtmNetworkProfileEntry  

ds1AtmNetworkProfile-Shelf-o 1.3.6.1.4.1.529.23.25.1.1.1
Tok_String
OBJECT-TYPE    
  INTEGER  

ds1AtmNetworkProfile-Slot-o 1.3.6.1.4.1.529.23.25.1.1.2
Tok_String
OBJECT-TYPE    
  INTEGER  

ds1AtmNetworkProfile-Item-o 1.3.6.1.4.1.529.23.25.1.1.3
Tok_String
OBJECT-TYPE    
  INTEGER  

ds1AtmNetworkProfile-Name 1.3.6.1.4.1.529.23.25.1.1.4
Name of IMA Line Config profile.
OBJECT-TYPE    
  DisplayString  

ds1AtmNetworkProfile-PhysicalAddress-Shelf 1.3.6.1.4.1.529.23.25.1.1.5
The number of the shelf that the addressed physical device resides on.
OBJECT-TYPE    
  INTEGER anyShelf(1), shelf1(2), shelf2(3), shelf3(4), shelf4(5), shelf5(6), shelf6(7), shelf7(8), shelf8(9), shelf9(10)  

ds1AtmNetworkProfile-PhysicalAddress-Slot 1.3.6.1.4.1.529.23.25.1.1.6
The number of the slot that the addressed physical device resides on.
OBJECT-TYPE    
  INTEGER anySlot(1), slot1(2), slot2(3), slot3(4), slot4(5), slot5(6), slot6(7), slot7(8), slot8(9), slot9(10), slot10(11), slot11(12), slot12(13), slot13(14), slot14(15), slot15(16), slot16(17), slot17(18), slot18(19), slot19(20), slot20(21), slot21(22), slot22(23), slot23(24), slot24(25), slot25(26), slot26(27), slot27(28), slot28(29), slot29(30), slot30(31), slot31(32), slot32(33), slot33(34), slot34(35), slot35(36), slot36(37), slot37(38), slot38(39), slot39(40), slot40(41), aLim(55), bLim(56), cLim(57), dLim(58), leftController(49), rightController(50), controller(42), firstControlModule(53), secondControlModule(54), trunkModule1(45), trunkModule2(46), controlModule(51), slotPrimary(59)  

ds1AtmNetworkProfile-PhysicalAddress-ItemNumber 1.3.6.1.4.1.529.23.25.1.1.7
A number that specifies an addressable entity within the context of shelf and slot.
OBJECT-TYPE    
  INTEGER  

ds1AtmNetworkProfile-Enabled 1.3.6.1.4.1.529.23.25.1.1.8
TRUE if the line is enabled, otherwise FALSE.
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

ds1AtmNetworkProfile-SparingMode 1.3.6.1.4.1.529.23.25.1.1.41
Port sparing operational mode for this port.
OBJECT-TYPE    
  INTEGER inactive(1), manual(2), automatic(3)  

ds1AtmNetworkProfile-IgnoreLineup 1.3.6.1.4.1.529.23.25.1.1.42
Ignore line up value for this port.
OBJECT-TYPE    
  INTEGER systemDefined(1), no(2), yes(3)  

ds1AtmNetworkProfile-LineConfig-FrameType 1.3.6.1.4.1.529.23.25.1.1.9
The super-framing mode that is used on the physical link(s).
OBJECT-TYPE    
  INTEGER d4(1), esf(2), g703(3), n-2ds(4)  

ds1AtmNetworkProfile-LineConfig-Encoding 1.3.6.1.4.1.529.23.25.1.1.10
The layer 1 line encoding used for the physical link(s).
OBJECT-TYPE    
  INTEGER ami(1), b8zs(2), hdb3(3), none(4)  

ds1AtmNetworkProfile-LineConfig-NailedGroup 1.3.6.1.4.1.529.23.25.1.1.11
The group index to which this link belongs to
OBJECT-TYPE    
  INTEGER  

ds1AtmNetworkProfile-LineConfig-Loopback 1.3.6.1.4.1.529.23.25.1.1.12
Loopback mode.
OBJECT-TYPE    
  INTEGER noLoopback(1), feLoopback(2), lineLoopback(3), remoteLoopback(4), localLoopback(5)  

ds1AtmNetworkProfile-LineConfig-ClockSource 1.3.6.1.4.1.529.23.25.1.1.13
Tok_String
OBJECT-TYPE    
  INTEGER eligible(1), notEligible(2)  

ds1AtmNetworkProfile-LineConfig-ClockPriority 1.3.6.1.4.1.529.23.25.1.1.14
Clock priority assigned to the T1 line. Used to select particular lines as clock source.
OBJECT-TYPE    
  INTEGER highPriority(2), middlePriority(3), lowPriority(4)  

ds1AtmNetworkProfile-LineConfig-oFDL 1.3.6.1.4.1.529.23.25.1.1.15
Who's FDL are we using. Used only if frame-type is ESF - Ignored otherwise.
OBJECT-TYPE    
  INTEGER none(1), atNT(2), ansi(3), sprint(4)  

ds1AtmNetworkProfile-LineConfig-SendCode 1.3.6.1.4.1.529.23.25.1.1.43
The type of code to be sent across the DS1 interface.
OBJECT-TYPE    
  INTEGER noCode(1), lineCode(2), payloadCode(3), inbandloopCode(14), resetCode(4), qrsCode(5), n-511Pattern(6), n-3In24Pattern(7), n-1In16Pattern(8), allOnesPattern(9), allZerosPattern(10), altOnesZerosPattern(11), dblAltOnesZerosPattern(12), n-2Pow20Pattern(13)  

ds1AtmNetworkProfile-LineConfig-FrontEndType 1.3.6.1.4.1.529.23.25.1.1.16
The front end type of the transceiver.
OBJECT-TYPE    
  INTEGER shortHaul(1), longHaul(2)  

ds1AtmNetworkProfile-LineConfig-LineLength 1.3.6.1.4.1.529.23.25.1.1.39
The length of the physical line (for short haul lines).
OBJECT-TYPE    
  INTEGER n-1133(1), n-134266(2), n-267399(3), n-400533(4), n-534655(5)  

ds1AtmNetworkProfile-LineConfig-LineBuildOut 1.3.6.1.4.1.529.23.25.1.1.40
Line buildout value for CSU lines.
OBJECT-TYPE    
  INTEGER n-0Db(1), n-75Db(2), n-15Db(3), n-2255Db(4)  

ds1AtmNetworkProfile-LineConfig-PcmMode 1.3.6.1.4.1.529.23.25.1.1.18
Number of active channels: in PCM highway
OBJECT-TYPE    
  INTEGER isdn(24), clearChannel(25)  

ds1AtmNetworkProfile-LineConfig-CosetEnabled 1.3.6.1.4.1.529.23.25.1.1.19
Selecting yes signifies that the ATM Forum polynomial (coset polynomial) be added to HEC before the HEC verification of a received cell. In the transmit direction, this selection enables generation of a HEC with the coset polynomial value. Selecting no signifies that the ATM Forum polynomial (coset polynomial) *not* be added to HEC before HEC verification of a received cell. In the transmit direction, selecting no enables generation of a HEC without the coset polynomial value.
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

ds1AtmNetworkProfile-LineConfig-ScramblingEnabled 1.3.6.1.4.1.529.23.25.1.1.20
Selecting 'yes' enables the descrambling of received cells on the link. The payload of transmitted cells is scrambled. Selecting 'no' disables the descrambling of received cells on the link. The payload of transmitted cells is not scrambled.
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

ds1AtmNetworkProfile-LineConfig-HecCorrectionEnabled 1.3.6.1.4.1.529.23.25.1.1.21
Selecting 'yes' enables correction of cells received with a single-bit error in the HEC. Selecting 'no' disables correction of cells received with a single-bit error in the HEC.
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

ds1AtmNetworkProfile-LineConfig-VpSwitchingVpi 1.3.6.1.4.1.529.23.25.1.1.22
The Vpi to be used for the VP switching. Rest of the valid VPIs in valid vpi-vci-range will be used for the VC switching. Changes in this range will take effect immediately. THE USER SHOULD BE VERY CAREFUL WHILE CHANGING THIS VALUE BECAUSE ALL CONNECTIONS ON THE LIM WHERE THIS PORT BELONGS WILL BE DROPPED IN ORDER TO MAKE THIS NEW VALUE EFFECTIVE IMMEDIATELY. Valid only when the port is in UNI mode
OBJECT-TYPE    
  INTEGER  

ds1AtmNetworkProfile-LineConfig-ImaOptionConfig-TxlinkConfig-NeTxLid 1.3.6.1.4.1.529.23.25.1.1.23
Transmit LID for the link
OBJECT-TYPE    
  INTEGER  

ds1AtmNetworkProfile-LineConfig-ImaOptionConfig-TxlinkConfig-AddLinkCondTime 1.3.6.1.4.1.529.23.25.1.1.24
Link conditioning timeout during link addition/insertion. Time in seconds
OBJECT-TYPE    
  INTEGER  

ds1AtmNetworkProfile-LineConfig-ImaOptionConfig-TxlinkConfig-LinkRecoveryType 1.3.6.1.4.1.529.23.25.1.1.25
Type of link recovery
OBJECT-TYPE    
  INTEGER manual(2), slow(3), fast(4)  

ds1AtmNetworkProfile-LineConfig-ImaOptionConfig-TxlinkConfig-FaultClearingType 1.3.6.1.4.1.529.23.25.1.1.26
Auto/Manual
OBJECT-TYPE    
  INTEGER manual(2), auto(3)  

ds1AtmNetworkProfile-LineConfig-ImaOptionConfig-TxlinkConfig-FaultClearingTime 1.3.6.1.4.1.529.23.25.1.1.27
Time after which fault is cleared if fault-clearing-type set to auto
OBJECT-TYPE    
  INTEGER  

ds1AtmNetworkProfile-LineConfig-ImaOptionConfig-TxlinkConfig-Priority 1.3.6.1.4.1.529.23.25.1.1.28
Priority defined for TRL, automatically select highest priority link to become the TRL (maybe we can deduct this from the t1ClockSource priority
OBJECT-TYPE    
  INTEGER  

ds1AtmNetworkProfile-LineConfig-ImaOptionConfig-RxlinkConfig-AddLinkCondTime 1.3.6.1.4.1.529.23.25.1.1.29
Link conditioning timeout during link addition/insertion. Time in seconds
OBJECT-TYPE    
  INTEGER  

ds1AtmNetworkProfile-LineConfig-ImaOptionConfig-RxlinkConfig-LinkRecoveryType 1.3.6.1.4.1.529.23.25.1.1.30
Type of link recovery
OBJECT-TYPE    
  INTEGER manual(2), slow(3), fast(4)  

ds1AtmNetworkProfile-LineConfig-ImaOptionConfig-RxlinkConfig-RecLinkCondTime 1.3.6.1.4.1.529.23.25.1.1.31
Link conditioning timeout during link recovery,
OBJECT-TYPE    
  INTEGER  

ds1AtmNetworkProfile-LineConfig-ImaOptionConfig-RxlinkConfig-RxLidLearningTime 1.3.6.1.4.1.529.23.25.1.1.32
Time to learn RX LID (in ICP cells)
OBJECT-TYPE    
  INTEGER  

ds1AtmNetworkProfile-LineConfig-ImaOptionConfig-RxlinkConfig-FaultClearingType 1.3.6.1.4.1.529.23.25.1.1.33
Auto/Manual
OBJECT-TYPE    
  INTEGER manual(2), auto(3)  

ds1AtmNetworkProfile-LineConfig-ImaOptionConfig-RxlinkConfig-FaultClearingTime 1.3.6.1.4.1.529.23.25.1.1.34
Time after which fault is cleared if fault-clearing-type set to auto
OBJECT-TYPE    
  INTEGER  

ds1AtmNetworkProfile-LineConfig-ImaOptionConfig-RxlinkConfig-InDefectIntTime 1.3.6.1.4.1.529.23.25.1.1.35
Time in milliseconds, if the defect is persistent for this time, the Rx Failed state machine enters the FAILED state
OBJECT-TYPE    
  INTEGER  

ds1AtmNetworkProfile-LineConfig-ImaOptionConfig-RxlinkConfig-OutDefectIntTime 1.3.6.1.4.1.529.23.25.1.1.36
Time in milliseconds, if the no defect condition persists for this time, the Rx Failed state machine leaves the FAILED state
OBJECT-TYPE    
  INTEGER  

ds1AtmNetworkProfile-LineConfig-ImaOptionConfig-RxlinkConfig-DefectRatio 1.3.6.1.4.1.529.23.25.1.1.37
Defect to No Defect ratio
OBJECT-TYPE    
  INTEGER  

ds1AtmNetworkProfile-LineConfig-StatusChangeTrapEnable 1.3.6.1.4.1.529.23.25.1.1.44
When set to yes, a line status change trap is sent. NOTE: when the line status change results from a higher level line status change, i.e., ds3, then no trap for the ds1 are sent. The default setting is No.
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

ds1AtmNetworkProfile-Action-o 1.3.6.1.4.1.529.23.25.1.1.38
Tok_String
OBJECT-TYPE    
  INTEGER noAction(1), createProfile(2), deleteProfile(3)