ASCEND-MIB

File: ASCEND-MIB.mib (66009 bytes)

Imported modules

RFC1155-SMI RFC-1212

Imported symbols

enterprises TimeTicks IpAddress
OBJECT-TYPE

Defined Types

DisplayString  
OCTET STRING    

DoEntry  
SEQUENCE    
  doSlotIndex INTEGER
  doItemIndex INTEGER
  doDial INTEGER
  doHangUp INTEGER
  doAnswer INTEGER
  doExtendBW INTEGER
  doContractBW INTEGER
  doBegEndRemoteLB INTEGER
  doBegEndBERT INTEGER
  doResynchronize INTEGER

HostStatusEntry  
SEQUENCE    
  hostStatusSlotIndex INTEGER
  hostStatusItemIndex INTEGER
  hostStatusLocalName OCTET STRING
  hostStatusDialNum OCTET STRING
  hostStatusCallType INTEGER
  hostStatusCallMgm INTEGER
  hostStatusDataSvc INTEGER
  hostStatusCallState INTEGER
  hostStatusRemName OCTET STRING
  hostStatusChannels INTEGER
  hostStatusDuration INTEGER

ConsoleEntry  
SEQUENCE    
  consoleIndex INTEGER
  consoleIf INTEGER
  consoleType INTEGER
  consoleSecurity INTEGER
  consoleSpecific OBJECT IDENTIFIER

FatalLogTableEntry  
SEQUENCE    
  fatalLogIndex INTEGER
  fatalLogSlotIndex INTEGER
  fatalLogSoftwareVerion DisplayString
  fatalLogUserprofile DisplayString
  fatalLogLoadName DisplayString
  fatalLogLocation DisplayString
  fatalLogReason INTEGER
  fatalLogAbsoluteTime INTEGER

Defined Values

ascend 1.3.6.1.4.1.529
OBJECT IDENTIFIER    

products 1.3.6.1.4.1.529.1
OBJECT IDENTIFIER    

slots 1.3.6.1.4.1.529.2
OBJECT IDENTIFIER    

hostTypes 1.3.6.1.4.1.529.3
OBJECT IDENTIFIER    

advancedAgent 1.3.6.1.4.1.529.4
OBJECT IDENTIFIER    

lanTypes 1.3.6.1.4.1.529.5
OBJECT IDENTIFIER    

doGroup 1.3.6.1.4.1.529.6
OBJECT IDENTIFIER    

hostStatus 1.3.6.1.4.1.529.7
OBJECT IDENTIFIER    

console 1.3.6.1.4.1.529.8
OBJECT IDENTIFIER    

systemStatusGroup 1.3.6.1.4.1.529.9
OBJECT IDENTIFIER    

eventGroup 1.3.6.1.4.1.529.10
OBJECT IDENTIFIER    

callStatusGroup 1.3.6.1.4.1.529.11
OBJECT IDENTIFIER    

sessionStatusGroup 1.3.6.1.4.1.529.12
OBJECT IDENTIFIER    

radiusGroup 1.3.6.1.4.1.529.13
OBJECT IDENTIFIER    

mCastGroup 1.3.6.1.4.1.529.14
OBJECT IDENTIFIER    

lanModemGroup 1.3.6.1.4.1.529.15
OBJECT IDENTIFIER    

firewallGroup 1.3.6.1.4.1.529.16
OBJECT IDENTIFIER    

wanDialoutPkt 1.3.6.1.4.1.529.17
OBJECT IDENTIFIER    

powerSupply 1.3.6.1.4.1.529.18
OBJECT IDENTIFIER    

multiShelf 1.3.6.1.4.1.529.19
OBJECT IDENTIFIER    

miscGroup 1.3.6.1.4.1.529.20
OBJECT IDENTIFIER    

asgGroup 1.3.6.1.4.1.529.21
OBJECT IDENTIFIER    

flashGroup 1.3.6.1.4.1.529.22
OBJECT IDENTIFIER    

configuration 1.3.6.1.4.1.529.23
OBJECT IDENTIFIER    

atmpGroup 1.3.6.1.4.1.529.24
OBJECT IDENTIFIER    

callLoggingGroup 1.3.6.1.4.1.529.25
OBJECT IDENTIFIER    

srvcMgmtGroup 1.3.6.1.4.1.529.26
OBJECT IDENTIFIER    

resourcesGroup 1.3.6.1.4.1.529.27
OBJECT IDENTIFIER    

voipGroup 1.3.6.1.4.1.529.28
OBJECT IDENTIFIER    

mgGroup 1.3.6.1.4.1.529.29
OBJECT IDENTIFIER    

sparingGroup 1.3.6.1.4.1.529.30
OBJECT IDENTIFIER    

cltmGroup 1.3.6.1.4.1.529.31
OBJECT IDENTIFIER    

multiband 1.3.6.1.4.1.529.1.1
OBJECT IDENTIFIER    

max 1.3.6.1.4.1.529.1.2
OBJECT IDENTIFIER    

pipeline 1.3.6.1.4.1.529.1.3
OBJECT IDENTIFIER    

max-tnt 1.3.6.1.4.1.529.1.4
OBJECT IDENTIFIER    

dslTnt 1.3.6.1.4.1.529.1.5
OBJECT IDENTIFIER    

aqueduct 1.3.6.1.4.1.529.1.6
OBJECT IDENTIFIER    

stinger-10 1.3.6.1.4.1.529.1.7
OBJECT IDENTIFIER    

apx-8000 1.3.6.1.4.1.529.1.8
OBJECT IDENTIFIER    

max200 1.3.6.1.4.1.529.1.2.1
OBJECT IDENTIFIER    

max1800 1.3.6.1.4.1.529.1.2.2
OBJECT IDENTIFIER    

max2000 1.3.6.1.4.1.529.1.2.3
OBJECT IDENTIFIER    

max4000 1.3.6.1.4.1.529.1.2.4
OBJECT IDENTIFIER    

max4002 1.3.6.1.4.1.529.1.2.5
OBJECT IDENTIFIER    

max4004 1.3.6.1.4.1.529.1.2.6
OBJECT IDENTIFIER    

max6000 1.3.6.1.4.1.529.1.2.7
OBJECT IDENTIFIER    

max800 1.3.6.1.4.1.529.1.2.8
OBJECT IDENTIFIER    

max3000 1.3.6.1.4.1.529.1.2.9
OBJECT IDENTIFIER    

dslmax20 1.3.6.1.4.1.529.1.2.10
OBJECT IDENTIFIER    

terminator 1.3.6.1.4.1.529.1.2.11
OBJECT IDENTIFIER    

cvmax100 1.3.6.1.4.1.529.1.2.12
OBJECT IDENTIFIER    

pipe15 1.3.6.1.4.1.529.1.3.1
OBJECT IDENTIFIER    

pipe25 1.3.6.1.4.1.529.1.3.2
OBJECT IDENTIFIER    

pipe25Px 1.3.6.1.4.1.529.1.3.3
OBJECT IDENTIFIER    

pipe25Fx 1.3.6.1.4.1.529.1.3.4
OBJECT IDENTIFIER    

pipe50 1.3.6.1.4.1.529.1.3.5
OBJECT IDENTIFIER    

pipe75 1.3.6.1.4.1.529.1.3.6
OBJECT IDENTIFIER    

pipe130T1 1.3.6.1.4.1.529.1.3.7
OBJECT IDENTIFIER    

pipe400 1.3.6.1.4.1.529.1.3.8
OBJECT IDENTIFIER    

pipe220 1.3.6.1.4.1.529.1.3.9
OBJECT IDENTIFIER    

dslPipeAcap 1.3.6.1.4.1.529.1.3.10
OBJECT IDENTIFIER    

dslPipeS 1.3.6.1.4.1.529.1.3.11
OBJECT IDENTIFIER    

dslPipe2S 1.3.6.1.4.1.529.1.3.12
OBJECT IDENTIFIER    

dslPipeAdmt 1.3.6.1.4.1.529.1.3.21
OBJECT IDENTIFIER    

dslPipeAlctlDmt 1.3.6.1.4.1.529.1.3.22
OBJECT IDENTIFIER    

dslPipeAdslCoeC 1.3.6.1.4.1.529.1.3.13
OBJECT IDENTIFIER    

dslPipeSdslCoe 1.3.6.1.4.1.529.1.3.14
OBJECT IDENTIFIER    

dslPipeSdslCoe2S 1.3.6.1.4.1.529.1.3.15
OBJECT IDENTIFIER    

dslPipeAdslCoeD 1.3.6.1.4.1.529.1.3.20
OBJECT IDENTIFIER    

pipe85 1.3.6.1.4.1.529.1.3.16
OBJECT IDENTIFIER    

pipe50LS56 1.3.6.1.4.1.529.1.3.17
OBJECT IDENTIFIER    

pipe130V35 1.3.6.1.4.1.529.1.3.18
OBJECT IDENTIFIER    

pipe130N56 1.3.6.1.4.1.529.1.3.19
OBJECT IDENTIFIER    

spipe95 1.3.6.1.4.1.529.1.3.23
OBJECT IDENTIFIER    

spipe155T1 1.3.6.1.4.1.529.1.3.24
OBJECT IDENTIFIER    

dslPipe50SdslCell 1.3.6.1.4.1.529.1.3.25
OBJECT IDENTIFIER    

dslPipeSdslHs 1.3.6.1.4.1.529.1.3.26
OBJECT IDENTIFIER    

aq300 1.3.6.1.4.1.529.1.6.1
OBJECT IDENTIFIER    

hostTypeAny 1.3.6.1.4.1.529.3.1
OBJECT IDENTIFIER    

hostTypeDual 1.3.6.1.4.1.529.3.2
OBJECT IDENTIFIER    

hostTypeQuad 1.3.6.1.4.1.529.3.3
OBJECT IDENTIFIER    

hostTypeAim2 1.3.6.1.4.1.529.3.4
OBJECT IDENTIFIER    

hostTypeAim6 1.3.6.1.4.1.529.3.5
OBJECT IDENTIFIER    

lanTypeAny 1.3.6.1.4.1.529.5.1
OBJECT IDENTIFIER    

lanTypeEthernet 1.3.6.1.4.1.529.5.2
OBJECT IDENTIFIER    

lanTypeEtherData 1.3.6.1.4.1.529.5.3
OBJECT IDENTIFIER    

doTable 1.3.6.1.4.1.529.6.1
A list of do entries.
OBJECT-TYPE    
  SEQUENCE OF  
    DoEntry

doEntry 1.3.6.1.4.1.529.6.1.1
An entry containing all of the action (do) commands and the slot and item index.
OBJECT-TYPE    
  DoEntry  

doSlotIndex 1.3.6.1.4.1.529.6.1.1.1
The index of the slot containing the item for which an action is desired. The valid range is 1 through the value slotNumber.
OBJECT-TYPE    
  INTEGER  

doItemIndex 1.3.6.1.4.1.529.6.1.1.2
The item number on the indexed slot for which an action is desired. The valid range is 1 through the value slotItems in the slotTable when indexed by a value equal to doSlotIndex.
OBJECT-TYPE    
  INTEGER  

doDial 1.3.6.1.4.1.529.6.1.1.3
When read returns valid if the indexed slot/item can dial a call. Writing any value will cause a call to be placed when valid, otherwise the write is ignored.
OBJECT-TYPE    
  INTEGER valid(1), notValid(2)  

doHangUp 1.3.6.1.4.1.529.6.1.1.4
When read returns valid if the indexed slot/item can terminate a call. Writing any value will cause the call to be terminated when valid, otherwise the write is ignored.
OBJECT-TYPE    
  INTEGER valid(1), notValid(2)  

doAnswer 1.3.6.1.4.1.529.6.1.1.5
When read returns valid if the indexed slot/item can answer a call. Writing any value will cause the call to be answered when valid, otherwise the write is ignored.
OBJECT-TYPE    
  INTEGER valid(1), notValid(2)  

doExtendBW 1.3.6.1.4.1.529.6.1.1.6
When read returns valid if the indexed slot/item can extend bandwidth. Writing any value will cause bandwidth to be extended when valid, otherwise the write is ignored.
OBJECT-TYPE    
  INTEGER valid(1), notValid(2)  

doContractBW 1.3.6.1.4.1.529.6.1.1.7
When read returns valid if the indexed slot/item can contract bandwidth. Writing any value will cause bandwidth to be contracted when valid, otherwise the write is ignored.
OBJECT-TYPE    
  INTEGER valid(1), notValid(2)  

doBegEndRemoteLB 1.3.6.1.4.1.529.6.1.1.8
When read returns valid if the indexed slot/item can enter or exit remote loopback. Writing any value will cause the current remote loopback state to be toggled when valid, otherwise the write is ignored.
OBJECT-TYPE    
  INTEGER valid(1), notValid(2)  

doBegEndBERT 1.3.6.1.4.1.529.6.1.1.9
When read returns valid if the indexed slot/item can enter or exit BERT test mode. Writing any value will cause the current BERT test state to be toggled when valid, otherwise the write is ignored.
OBJECT-TYPE    
  INTEGER valid(1), notValid(2)  

doResynchronize 1.3.6.1.4.1.529.6.1.1.10
When read returns valid if the indexed slot/item can issue a resynchronize command. Writing any value will cause a resynchronize command to be issued when valid, otherwise the write is ignored.
OBJECT-TYPE    
  INTEGER valid(1), notValid(2)  

hostStatusTable 1.3.6.1.4.1.529.7.1
A table of host port status entries. A host port status entry potentialy exists for every slot/item. Host port status entries are only meaningful for slot/items that reference a host port. When indexed by other slot/items NO SUCH NAME will be returned.
OBJECT-TYPE    
  SEQUENCE OF  
    HostStatusEntry

hostStatusEntry 1.3.6.1.4.1.529.7.1.1
An entry containing the host port status of the indexed slot/item.
OBJECT-TYPE    
  HostStatusEntry  

hostStatusSlotIndex 1.3.6.1.4.1.529.7.1.1.1
A unique value for each slot. The slot identified by a particular value of this index is the same slot as identified by the same value of slotIndex.
OBJECT-TYPE    
  INTEGER  

hostStatusItemIndex 1.3.6.1.4.1.529.7.1.1.2
Index to each item defined for each slot. Since entries in this table are only valid for host ports an item number is a port number within the indexed slot.
OBJECT-TYPE    
  INTEGER  

hostStatusLocalName 1.3.6.1.4.1.529.7.1.1.3
The name from the current call profile of the indexed host slot and port.
OBJECT-TYPE    
  OCTET STRING  

hostStatusDialNum 1.3.6.1.4.1.529.7.1.1.4
The phone number from the current call profile of the indexed host slot and port.
OBJECT-TYPE    
  OCTET STRING  

hostStatusCallType 1.3.6.1.4.1.529.7.1.1.5
The type of call from the current call profile of the indexed host slot and port.
OBJECT-TYPE    
  INTEGER aim(1), bonding(2), one-channel(3), two-channel(4), ft1(5), ft1Aim(6), ft1BandO(7)  

hostStatusCallMgm 1.3.6.1.4.1.529.7.1.1.6
The call management protocol from the current call profile for the indexed host slot and port. Call management is only meaningful for calls using an inverse multiplexing protocol.
OBJECT-TYPE    
  INTEGER none(1), manual(2), static(3), dynamic(4), delta(5), one-of-8(6), one-of-40(7), mode1(8), mode2(9), mode3(10), mode0(11)  

hostStatusDataSvc 1.3.6.1.4.1.529.7.1.1.7
The type of service from the current call profile for the indexed host slot and port.
OBJECT-TYPE    
  INTEGER serviceVoice(1), service56KR(2), service56K(3), service64K(4), service384KR(5), service384K-H0(6), service1536K(7), service1536KR(8), service128K(9), service192K(10), service256K(11), service320K(12), service384K(13), service448K(14), service512K(15), service576K(16), service640K(17), service704K(18), service768K(19), service832K(20), service896K(21), service960K(22), service1024K(23), service1088K(24), service1152K(25), service1216K(26), service1280K(27), service1344K(28), service1408K(29), service1472K(30), service1600K(31), service1664K(32), service1728K(33), service1792K(34), service1856K(35), service1920K(36), serviceModem(37), serviceV110-24-56K(38), serviceV110-48-56K(39), serviceV110-96-56K(40), serviceV110-192-56K(41), serviceV110-384-56K(42), serviceV110-24-56KR(43), serviceV110-48-56KR(44), serviceV110-96-56KR(45), serviceV110-192-56KR(46), serviceV110-384-56KR(47), serviceV110-24-64K(48), serviceV110-48-64K(49), serviceV110-96-64K(50), serviceV110-192-64K(51), serviceV110-384-64K(52), serviceV110-24-64KR(53), serviceV110-48-64KR(54), serviceV110-96-64KR(55), serviceV110-192-64KR(56), serviceV110-384-64KR(57)  

hostStatusCallState 1.3.6.1.4.1.529.7.1.1.8
Shows the current state of the current call for the indexed host slot and port. The returned value will indicates the same state displayed in a call status window for the port.
OBJECT-TYPE    
  INTEGER other(1), answering(2), calling(3), clearing(4), localLoop(5), handshake(6), idle(7), online(8), loopMast(9), loopSlav(10), bertMast(11), bertSlav(12), remoteMg(13), ringing(14), setupAdd(15), setupHnd(16), setupRem(17)  

hostStatusRemName 1.3.6.1.4.1.529.7.1.1.9
The value displayed on the 4th line of the call status menu. When the hostStatusCallType is aim( 1 ) this value is the name of the host port on the far end of a connection, or the far-end system name if the host port has not been named. An empty string is returned when there is no call active or when aim( 1 ) is not being used.
OBJECT-TYPE    
  OCTET STRING  

hostStatusChannels 1.3.6.1.4.1.529.7.1.1.10
The number of channels in use by the call as displayed on the third line of the call status menu for the indexed slot and port.
OBJECT-TYPE    
  INTEGER  

hostStatusDuration 1.3.6.1.4.1.529.7.1.1.11
The duration of the call associated with the indexed host slot and port, measured in seconds.
OBJECT-TYPE    
  INTEGER  

consoleNumber 1.3.6.1.4.1.529.8.1
The number of consoles supported by this device.
OBJECT-TYPE    
  INTEGER  

consoleTable 1.3.6.1.4.1.529.8.2
A list of console entries.
OBJECT-TYPE    
  SEQUENCE OF  
    ConsoleEntry

consoleEntry 1.3.6.1.4.1.529.8.2.1
An entry containing objects that describe the indexed console port.
OBJECT-TYPE    
  ConsoleEntry  

consoleIndex 1.3.6.1.4.1.529.8.2.1.1
A unique value for each console. It's value ranges between 1 and the value consoleNumber. This is the index into the console table to identify a particular console.
OBJECT-TYPE    
  INTEGER  

consoleIf 1.3.6.1.4.1.529.8.2.1.2
The interface number associated with the indexed console. This number can be used to index into the interface (and other) tables to obtain detailed console status.
OBJECT-TYPE    
  INTEGER  

consoleType 1.3.6.1.4.1.529.8.2.1.3
The type of console in the indexed entry. When no console is plugged into a console port the value inactive(5) is returned. The value remote(6) indicates a console initiated via remote management or TELNET session.
OBJECT-TYPE    
  INTEGER other(1), primary(2), secondary(3), palmtop(4), inactive(5), remote(6)  

consoleSecurity 1.3.6.1.4.1.529.8.2.1.4
The security profile, in the range of 1 through the number of profiles supported by the unit, of the indexed console. The default security profile is profile number 1. Note: This attribute is supported on non-TNT platforms only.
OBJECT-TYPE    
  INTEGER  

consoleSpecific 1.3.6.1.4.1.529.8.2.1.5
A reference to MIB definitions specific to the console port. Contains the object identifier { 0 0 } if there is no console specific information for the indexed console.
OBJECT-TYPE    
  OBJECT IDENTIFIER  

sysAbsoluteStartupTime 1.3.6.1.4.1.529.9.1
The time system startup up in seconds since January 1, 1990. This value in concert with 'sysSecsSinceStartup' below can be used to compute the current time in seconds since 1/1/90.
OBJECT-TYPE    
  INTEGER  

sysSecsSinceStartup 1.3.6.1.4.1.529.9.2
The number of seconds since system startup.
OBJECT-TYPE    
  INTEGER  

sysMibVersionNum 1.3.6.1.4.1.529.9.3
Version number of this private MIB. Versions numbers start at 1 and increment by 1 for every major revision. Major revisions are additions/deletions to this MIB.
OBJECT-TYPE    
  INTEGER  

sysMibMinorRevNum 1.3.6.1.4.1.529.9.4
Value represents the minor revision number of this MIB. Minor revision numbers start at 0 and increment by 1 for each revision. Minor revisions are textual or comment changes.
OBJECT-TYPE    
  INTEGER  

sysConfigTftp 1.3.6.1.4.1.529.9.5
OBJECT IDENTIFIER    

sysConfigTftpCmd 1.3.6.1.4.1.529.9.5.1
This variable instructs the system to perform the specified tftp operation. Note: loadCode( 6 ) is not supported on TNT platform.
OBJECT-TYPE    
  INTEGER save(1), restore(2), saveAll(3), saveMib(4), saveAllMib(5), loadCode(6), saveIncProf(7), saveExcProf(8)  

sysConfigTftpStatus 1.3.6.1.4.1.529.9.5.2
This variable indicates the status of a save or restore operation through tftp.
OBJECT-TYPE    
  INTEGER ok(1), notFound(2), access(3), noSpace(4), badOp(5), badTid(6), exists(7), noSuchUser(8), parameter(9), busy(10), noResources(11), timeout(12), unrecoverable(13), tooManyRetries(14), createFile(15), openFile(16), inProgress(17)  

sysConfigTftpHostAddr 1.3.6.1.4.1.529.9.5.3
This variable indicates the host address where the configuration file is saved to or restored from through tftp.
OBJECT-TYPE    
  IpAddress  

sysConfigTftpFilename 1.3.6.1.4.1.529.9.5.4
This variable indicates the file name of the configuration file to save to or restore from a SNMP host through tftp.
OBJECT-TYPE    
  DisplayString  

sysConfigTftpPort 1.3.6.1.4.1.529.9.5.5
This variable indicates the port # to use when starting a TSAVE TRESTORE command. Normally this would be port 69, but we need to allow the Java Console to override this in case the Console workstation has a TFTP server already running.
OBJECT-TYPE    
  INTEGER  

sysConfigTftpParameter 1.3.6.1.4.1.529.9.5.6
This variable indicates the list of profiles to be included or excluded during the save operation through tftp. The snmp agent will modify the set string to an uppercase space-separated new string and return the changed value. This is to clarify the case insensitive profile naming.
OBJECT-TYPE    
  DisplayString  

sysConfigRadius 1.3.6.1.4.1.529.9.6
OBJECT IDENTIFIER    

sysConfigRadiusCmd 1.3.6.1.4.1.529.9.6.1
This variable instructs the system to re-read its RADIUS configuration. This variable will return a general error if RADIUS is not configured or if sysConfigRadiusStatus has a value of processing(2).
OBJECT-TYPE    
  INTEGER all(1), routes(2), pools(3), nailed(4), termsrv(5), source(6)  

sysConfigRadiusStatus 1.3.6.1.4.1.529.9.6.2
This variable indicates the status of the last RADIUS configuration retrieval. This includes the boot time retrieval.
OBJECT-TYPE    
  INTEGER init(1), processing(2), timeout(3), error(4), complete(5)  

sysAbsoluteCurrentTime 1.3.6.1.4.1.529.9.7
The current system time in seconds since January 1, 1990. Changing this value may result in a change of sysAbsoluteStartupTime and not of sysSecsSinceStartup. The following relationship holds: sysAbsoluteCurrentTime - sysAbsoluteStartupTime = sysSecsSinceStartup.
OBJECT-TYPE    
  INTEGER  

sysReset 1.3.6.1.4.1.529.9.8
The reset takes effect after 1 minute.
OBJECT-TYPE    
  INTEGER no-op(1), reset(2)  

sysLoadName 1.3.6.1.4.1.529.9.9
The name of the load which is currently running.
OBJECT-TYPE    
  DisplayString  

sysAuthPreference 1.3.6.1.4.1.529.9.10
An incoming call can be authenticated using a local profile or one from an authentication server such as RADIUS or TACACS. local-first means authenticate from a local profile first, and if that fails, try the authentication server. remote-first means get a profile from the authentication server and authenticate from that and if that fails, try to authenticate from a local profile. remote-no is the same as remote-first except if the external authentication server NACKs the request, then the connection will be denied, i.e. no search of the local profiles will be made.
OBJECT-TYPE    
  INTEGER no-op(1), local-first(2), remote-first(3), remote-no(4)  

sysSPROM 1.3.6.1.4.1.529.9.11
OBJECT IDENTIFIER    

sysSPROMSerialNumber 1.3.6.1.4.1.529.9.11.1
The serial number as stored in the security PROM. The same value is also returned as part of sysName.
OBJECT-TYPE    
  INTEGER  

sysSPROMOptions1 1.3.6.1.4.1.529.9.11.2
The various bit positions are: (2 ** 0) - rs366Enabled (2 ** 1) - dChannelEnabled (2 ** 2) - autoDBAEnabled (2 ** 3) - bondingEnabled (2 ** 4) - aimEnabled (2 ** 5) - v25bisEnabled (2 ** 6) - x21Enabled (2 ** 7) - switchedEnabled (2 ** 8) - mrateEnabled (2 ** 9) - pbxEnabled (2 ** 10) - pcbusEnabled (2 ** 11) - bridgingEnabled (2 ** 12) - pipeHxEnabled (2 ** 13) - frameRelayEnabled (2 ** 14) - maxLinkClientEnabled (2 ** 15) - dataCallEnabled (2 ** 16) - dualSlotT1Enabled (2 ** 17) - r2SignalingEnabled (2 ** 18) - domesticEnabled (2 ** 19) - modemTSDialoutEnabled (2 ** 20) - pipePxEnabled (2 ** 21) - firewallsEnabled (2 ** 22) - serialPortT1_CSU_Enabled (2 ** 23) - pipePotsEnabled (2 ** 24) - forceMultibandPlatformSimulationEnabled (2 ** 25) - k56SlotCardOnlyEnabled (2 ** 26) - networkManagementEnabled (2 ** 27) - advancedAgentEnabled (DEPRECATED) (2 ** 28) - phsSupportEnabled (2 ** 29) - selectoolsEnabled (2 ** 30) - routingProtocolsDisabled (2 ** 31) - tunnelProtocolsDisabled (DEPRECATED).
OBJECT-TYPE    
  INTEGER  

sysSPROMOptions2 1.3.6.1.4.1.529.9.11.3
The various bit positions are: (2 ** 0) - atmpEnabled (2 ** 1) - l2tpEnabled (2 ** 2) - pptpEnabled (2 ** 3) - l2fEnabled (2 ** 4) - ipinipEnabled (2 ** 5) - vRouterEnabled (2 ** 6) - aodiEnabled (2 ** 7) - maddModemEnabled (2 ** 8) - madd96DevicesEnabled (2 ** 9) - maddHdlcEnabled (2 ** 10) - v110Enabled (2 ** 11) - sdtnEnabled (2 ** 12) - restrictDSLTermEnabled (2 ** 13) - megamaxEnabled (2 ** 14) - maxtapEnabled (2 ** 15) - phs21Enabled (2 ** 16) - atmSvcEnabled (2 ** 17) - frVcEnabled (2 ** 18) - networkManagementVoipEnabled (2 ** 19) - networkManagementPlusEnabled (2 ** 20) - networkManagementPlusVoipEnabled
OBJECT-TYPE    
  INTEGER  

sysSPROMCountries1 1.3.6.1.4.1.529.9.11.4
The various bit positions are: (2 ** 0) - FranceIsdn (2 ** 1) - UKIsdn (2 ** 2) - BelgiumIsdn (2 ** 3) - JapanIsdn (2 ** 4) - AustraliaIsdn (2 ** 5) - GermanIsdn (2 ** 6) - UKDpnss (2 ** 7) - SwissIsdn (2 ** 8) - GloBandIsdn
OBJECT-TYPE    
  INTEGER  

resetStat 1.3.6.1.4.1.529.9.12
OBJECT IDENTIFIER    

resetStatEther 1.3.6.1.4.1.529.9.12.1
Clear Ethernet statistics.
OBJECT-TYPE    
  INTEGER  

resetStatWAN 1.3.6.1.4.1.529.9.12.2
Clear specified interface's WAN statistics.
OBJECT-TYPE    
  INTEGER  

resetStatAll 1.3.6.1.4.1.529.9.12.3
Clear all WAN statistics.
OBJECT-TYPE    
  INTEGER  

sysLastRestartReason 1.3.6.1.4.1.529.9.13
The error code for the previous box restart. The error codes are identical to ones obtained via fatal-history from the debug monitor screen.
OBJECT-TYPE    
  INTEGER fatalAssert(1), fatalPoolsNoBuffer(2), fatalProfileBad(3), fatalSwitchTypeBad(4), fatalLif(5), fatalLcdError(6), fatalIsacTimeout(7), fatalSCCSpuriousInterrupt(8), fatalExecInvalidSwitch(9), fatalExecNoMailDesc(10), fatalExecNoMailPoll(11), fatalExecNoTask(12), fatalExecNoTimer(13), fataExecNoTimerPool(14), fatalExecWaitInCtricalSection(15), fatalDspDead(16), fatalDspProtocolError(17), fatalDspInternalError(18), fatalDspLossOfSync(19), fatalDspUnUsed(20), fatalDDDDead(21), fatalDDDProtocolError(22), fatalX25Buffers(23), fatalX25Init(24), fatalX25Stack(25), fatalZeroMemoryAlloc(27), fatalNegativeMemoryAllocate(28), fatalTaskLoop(29), fatalMemcpyTooLarge(30), fatalMemcpyNoMagic(31), fatalMemcpyWrongMagic(32), fatalMemcoyBadStart(33), fatalIDECTimeout(34), fatalExecRestricted(35), fatalStackOverflow(36), fatalDRAMCard(37), fatalMbufPanic(38), fatalNoPriority2Task(39), fatalProtectionFault(40), fatalClipping(41), fatalReadyHangFault(42), fatalExcessPostCompl(43), fatalWriteProtect(44), fatalPureVirtual(45), fatalATMSVC(46), fatalFRSVC(47), fatalInterruptCode(48), fatalLinkedListCorruption(55), fatalBadPower(60), fatalWatchdogTimeout(61), fatalUnexplainedNMI(62), fatalPrimarySelected(98), fatalOperatorReset(99), fatalSystemUp(100), warningBufferInUse(101), warningBufferWrongPool(102), warningBufferWrongHeap(103), warningBufferNotMemAlloc(104), warningBufferBadMemAlloc(105), warningBufferBogusPool(106), warningBufferBogusHeap(107), warningBufferNegativeMemalloc(108), warningBufferZeroMemalloc(109), warningBufferBoundary(110), warningBufferTooBig(111), warningBufferNull(112), warningBufferSegmentCountZero(113), warningBufferTrailerMagic(114), warningBufferTrailerBuffer(115), warningBufferTrailerLength(116), warningBufferTrailerUserMagic(117), warningBufferWriteAfterFree(118), warningBufferNotInUse(119), warningBufferMemcpyMagic(120), warningBufferMemcpyMagicNext(121), warningBufferNoExtraDRAM(129), errprPPPAsuncBufferInUse(130), warningIpcpIpLookup(131), warningBadChunk(135), warningUnexpectedIF(136), warningNoTimers(140), warningLCDAllocFailure(145), warningLCDNonSense(146), warningMemcpyTooLarge(150), warningMemcpyNoMagic(151), warningMemcpyWrongMagic(152), warningMemcpyBadStart(153), warningWANBufferLeak(154), warningTermSrvState(160), warningTermSrvSemaphore(161), warningTelnetFreeDrv(165), warningSTACTimeout(170), warningSTACDataNotOwned(171), warningExecFailure(175), warningExecNoMailbox(177), warningExecNoResources(178), warningUnexpected(179), warningChannelMapStuck(180), warningChannelDisplayStuck(181), warningNewCallNoDiscRequest(182), warningNewCallNoDiscResp(183), warningDisconnectRequestDropped(184), warningSpyderBuffer(185), warningSpyderDesc(186), warningSpyderLoseChannel(187), warningHscxSlowRelay(188), warningTcpSbcontTooBig(190), warningTcpSequenceGap(191), warningTcpTooMuchData(192), warningTcpTooMuchWrite(193), warningTcpBadOptions(194), warningLmodSlotDown(195), warningLmodDspDown(196), warningLmodDspmodemDown(197), warningTcpXmitLooping(198), warningOspfFatal(200), warningOspfWarn(201), warningBriJumperNotPresent(210), warningBriJumperConfiguration(211), infoCardBounced(220), infoCardDown(221), warningTacacsplusBase(300), warningTacacsplusPointerInconsistency(301), warningTacacsplusIndexInconsistency(302), warningTacacsplusTcpInconsistency(303), warningTacacsplusTcpOutofrangesocket(304), warningTacacsplusSocketMismatch(305), warningTacacsplusUnexpectedAuthState(306), warningTacacsplusMax(309), warningCidrWrongTree(310), warningCidrNoMem(311), warningCidrBusy(312), warningCidrNonempty(313), warningCidrDupDelete(314), warningSauthWrongInfo(320), warningSauthBadAddr(321), warningGdbProtectionFault(330), warningInFilterList(381), warningNoCountInFilterList(382), warningMismatchCountFilterList(383), warningCdtUnprotectedAccess(384), infoSystemResetOccurred(385), warningBadPowerSupply(400), warningEthernetNoTxBuf(550), warningDspCrashMin(512), warningDspCrashMax(767), warningDspWrongSlot(768), warningUnalignedAccess(800), warningH323NoResources(801), warningExecRestricted(999), warningEthernetCuBusy(1001), warningEthernetAckFailure(1002), warningEthernetReset(1003), warningEthernetCuActive(1005), warningEthernetWaitScb(1006), warningEthernetNoMACAddress(1007), warningBaeepromChange(2001), warningBaeepromImageMismatch(2002), warningFlashTypeBad(2010), warningMaxiopLoadFailure(2022), warningPrimaryHWsetupFailed(2100), warningSecondaryHWsetupFailed(2101), warningIpxsapFilterMagic(3001), warningIpxsapFilterCountZero(3002), warningIpxsapFilterCountMismatch(3003), warningModemTxChannelStuck(4000), warningModemTxChannelRecovered(4100), notApplicable(9998), unknown(9999)  

sysConfigChange 1.3.6.1.4.1.529.9.14
The name and security index (if available) of the user who changed the configuration.
OBJECT-TYPE    
  DisplayString  

sysConfigFlash 1.3.6.1.4.1.529.9.15
OBJECT IDENTIFIER    

fatalLogTable 1.3.6.1.4.1.529.9.16
A list of the most recent Fatal Log entries of the system as well as the included slot cards
OBJECT-TYPE    
  SEQUENCE OF  
    FatalLogTableEntry

fatalLogTableEntry 1.3.6.1.4.1.529.9.16.1
Definition of the row entries in the Fatal Log Table
OBJECT-TYPE    
  FatalLogTableEntry  

fatalLogIndex 1.3.6.1.4.1.529.9.16.1.1
Dynamic index that reflects the index used in the Fatal LOG table, starting with the most oldest event.
OBJECT-TYPE    
  INTEGER  

fatalLogSlotIndex 1.3.6.1.4.1.529.9.16.1.2
An index into the slotTable This has the same value as slotIndex, it is set to 0 for systems with one logical slot card.
OBJECT-TYPE    
  INTEGER  

fatalLogSoftwareVerion 1.3.6.1.4.1.529.9.16.1.3
The version of the software running, when this entry was created by the system.
OBJECT-TYPE    
  DisplayString  

fatalLogUserprofile 1.3.6.1.4.1.529.9.16.1.4
The user responsible for reseting the card. This will be set to the empty string if unknown.
OBJECT-TYPE    
  DisplayString  

fatalLogLoadName 1.3.6.1.4.1.529.9.16.1.5
The name of the Load executing on the card, it gives a textual description of the software code that was running on the system when the entry was created.
OBJECT-TYPE    
  DisplayString  

fatalLogLocation 1.3.6.1.4.1.529.9.16.1.6
The IP address from which a manual system reset was triggered.
OBJECT-TYPE    
  DisplayString  

fatalLogReason 1.3.6.1.4.1.529.9.16.1.7
The reason for reset as reported by the system. For a more detailed description consult the user manual.
OBJECT-TYPE    
  INTEGER fatalAssert(1), fatalPoolsNoBuffer(2), fatalProfileBad(3), fatalSwitchTypeBad(4), fatalLif(5), fatalLcdError(6), fatalIsacTimeout(7), fatalSCCSpuriousInterrupt(8), fatalExecInvalidSwitch(9), fatalExecNoMailDesc(10), fatalExecNoMailPoll(11), fatalExecNoTask(12), fatalExecNoTimer(13), fataExecNoTimerPool(14), fatalExecWaitInCtricalSection(15), fatalDspDead(16), fatalDspProtocolError(17), fatalDspInternalError(18), fatalDspLossOfSync(19), fatalDspUnUsed(20), fatalDDDDead(21), fatalDDDProtocolError(22), fatalX25Buffers(23), fatalX25Init(24), fatalX25Stack(25), fatalZeroMemoryAlloc(27), fatalNegativeMemoryAllocate(28), fatalTaskLoop(29), fatalMemcpyTooLarge(30), fatalMemcpyNoMagic(31), fatalMemcpyWrongMagic(32), fatalMemcoyBadStart(33), fatalIDECTimeout(34), fatalExecRestricted(35), fatalStackOverflow(36), fatalDRAMCard(37), fatalMbufPanic(38), fatalNoPriority2Task(39), fatalProtectionFault(40), fatalClipping(41), fatalReadyHangFault(42), fatalExcessPostCompl(43), fatalWriteProtect(44), fatalPureVirtual(45), fatalATMSVC(46), fatalFRSVC(47), fatalInterruptCode(48), fatalLinkedListCorruption(55), fatalBadPower(60), fatalWatchdogTimeout(61), fatalUnexplainedNMI(62), fatalPrimarySelected(98), fatalOperatorReset(99), fatalSystemUp(100), warningBufferInUse(101), warningBufferWrongPool(102), warningBufferWrongHeap(103), warningBufferNotMemAlloc(104), warningBufferBadMemAlloc(105), warningBufferBogusPool(106), warningBufferBogusHeap(107), warningBufferNegativeMemalloc(108), warningBufferZeroMemalloc(109), warningBufferBoundary(110), warningBufferTooBig(111), warningBufferNull(112), warningBufferSegmentCountZero(113), warningBufferTrailerMagic(114), warningBufferTrailerBuffer(115), warningBufferTrailerLength(116), warningBufferTrailerUserMagic(117), warningBufferWriteAfterFree(118), warningBufferNotInUse(119), warningBufferMemcpyMagic(120), warningBufferMemcpyMagicNext(121), warningBufferNoExtraDRAM(129), errprPPPAsuncBufferInUse(130), warningIpcpIpLookup(131), warningBadChunk(135), warningUnexpectedIF(136), warningNoTimers(140), warningLCDAllocFailure(145), warningLCDNonSense(146), warningMemcpyTooLarge(150), warningMemcpyNoMagic(151), warningMemcpyWrongMagic(152), warningMemcpyBadStart(153), warningWANBufferLeak(154), warningTermSrvState(160), warningTermSrvSemaphore(161), warningTelnetFreeDrv(165), warningSTACTimeout(170), warningSTACDataNotOwned(171), warningExecFailure(175), warningExecNoMailbox(177), warningExecNoResources(178), warningUnexpected(179), warningChannelMapStuck(180), warningChannelDisplayStuck(181), warningNewCallNoDiscRequest(182), warningNewCallNoDiscResp(183), warningDisconnectRequestDropped(184), warningSpyderBuffer(185), warningSpyderDesc(186), warningSpyderLoseChannel(187), warningHscxSlowRelay(188), warningTcpSbcontTooBig(190), warningTcpSequenceGap(191), warningTcpTooMuchData(192), warningTcpTooMuchWrite(193), warningTcpBadOptions(194), warningLmodSlotDown(195), warningLmodDspDown(196), warningLmodDspmodemDown(197), warningTcpXmitLooping(198), warningOspfFatal(200), warningOspfWarn(201), warningBriJumperNotPresent(210), warningBriJumperConfiguration(211), infoCardBounced(220), infoCardDown(221), warningTacacsplusBase(300), warningTacacsplusPointerInconsistency(301), warningTacacsplusIndexInconsistency(302), warningTacacsplusTcpInconsistency(303), warningTacacsplusTcpOutofrangesocket(304), warningTacacsplusSocketMismatch(305), warningTacacsplusUnexpectedAuthState(306), warningTacacsplusMax(309), warningCidrWrongTree(310), warningCidrNoMem(311), warningCidrBusy(312), warningCidrNonempty(313), warningCidrDupDelete(314), warningSauthWrongInfo(320), warningSauthBadAddr(321), warningGdbProtectionFault(330), warningInFilterList(381), warningNoCountInFilterList(382), warningMismatchCountFilterList(383), warningCdtUnprotectedAccess(384), infoSystemResetOccurred(385), warningBadPowerSupply(400), warningEthernetNoTxBuf(550), warningDspCrashMin(512), warningDspCrashMax(767), warningDspWrongSlot(768), warningUnalignedAccess(800), warningH323NoResources(801), warningExecRestricted(999), warningEthernetCuBusy(1001), warningEthernetAckFailure(1002), warningEthernetReset(1003), warningEthernetCuActive(1005), warningEthernetWaitScb(1006), warningEthernetNoMACAddress(1007), warningBaeepromChange(2001), warningBaeepromImageMismatch(2002), warningFlashTypeBad(2010), warningMaxiopLoadFailure(2022), warningPrimaryHWsetupFailed(2100), warningSecondaryHWsetupFailed(2101), warningIpxsapFilterMagic(3001), warningIpxsapFilterCountZero(3002), warningIpxsapFilterCountMismatch(3003), warningModemTxChannelStuck(4000), warningModemTxChannelRecovered(4100), notApplicable(9998), unknown(9999)  

fatalLogAbsoluteTime 1.3.6.1.4.1.529.9.16.1.8
The time at which the system was reset.
OBJECT-TYPE    
  INTEGER 1..7fffffff  

sysConfigFlashCmd 1.3.6.1.4.1.529.9.15.1
This variable instructs the system to copy the stored code image from PCMCIA flash to internal flash or vice versa.
OBJECT-TYPE    
  INTEGER copyPCMCIAtoInternal(1), copyInternalToPCMCIA(2)  

sysConfigFlashCopyStatus 1.3.6.1.4.1.529.9.15.2
This variable indicates the status of a flash image copy.
OBJECT-TYPE    
  INTEGER ok(1), inProgress(2), failed(3)  

sysConfigInternalFlashImageVersion 1.3.6.1.4.1.529.9.15.3
The code version stored on the internal flash.
OBJECT-TYPE    
  DisplayString  

sysConfigPCMCIAFlashImageVersion 1.3.6.1.4.1.529.9.15.4
The code version stored on the PCMCIA flash.
OBJECT-TYPE    
  DisplayString  

mibinternetProfile 1.3.6.1.4.1.529.23.1
OBJECT IDENTIFIER    

mibframeRelayProfile 1.3.6.1.4.1.529.23.2
OBJECT IDENTIFIER    

mibanswerProfile 1.3.6.1.4.1.529.23.3
OBJECT IDENTIFIER    

mibdS3NetworkProfile 1.3.6.1.4.1.529.23.4
OBJECT IDENTIFIER    

mibuds3NetworkProfile 1.3.6.1.4.1.529.23.5
OBJECT IDENTIFIER    

mibcadslNetworkProfile 1.3.6.1.4.1.529.23.6
OBJECT IDENTIFIER    

mibdadslNetworkProfile 1.3.6.1.4.1.529.23.7
OBJECT IDENTIFIER    

mibsdslNetworkProfile 1.3.6.1.4.1.529.23.8
OBJECT IDENTIFIER    

mibvdslNetworkProfile 1.3.6.1.4.1.529.23.9
OBJECT IDENTIFIER    

mibdmtAlDslNetworkProfile 1.3.6.1.4.1.529.23.10
OBJECT IDENTIFIER    

miboc3AtmNetworkProfile 1.3.6.1.4.1.529.23.11
OBJECT IDENTIFIER    

miblimSparingConfigProfile 1.3.6.1.4.1.529.23.12
OBJECT IDENTIFIER    

mibds3AtmNetworkProfile 1.3.6.1.4.1.529.23.13
OBJECT IDENTIFIER    

mibhdsl2NetworkProfile 1.3.6.1.4.1.529.23.14
OBJECT IDENTIFIER    

mibe3AtmNetworkProfile 1.3.6.1.4.1.529.23.15
OBJECT IDENTIFIER    

mibredundancyProfile 1.3.6.1.4.1.529.23.16
OBJECT IDENTIFIER    

mibredundancyStatsProfile 1.3.6.1.4.1.529.23.17
OBJECT IDENTIFIER