ZXR10-PROTOCOL-MIB
File:
ZXR10-PROTOCOL-MIB.mib (10489 bytes)
Imported modules
Imported symbols
Defined Types
Zxr10IpVrfAddrEntry |
|
SEQUENCE |
|
|
|
|
zxr10ipVrfVpnName |
DisplayString |
|
|
zxr10ipVrfAddr |
IpAddress |
|
|
zxr10ipVrfNetMask |
IpAddress |
|
|
zxr10ipVrfIfIndex |
Integer32 |
|
|
zxr10ipVrfBcastAddr |
Integer32 |
|
|
zxr10ipVrfReasmMaxSize |
Integer32 |
|
Zxr10TcpConnEntry |
|
SEQUENCE |
|
|
|
|
zxr10tcpConnVrfVpnName |
DisplayString |
|
|
zxr10tcpConnState |
INTEGER |
|
|
zxr10tcpConnLocalAddress |
IpAddress |
|
|
zxr10tcpConnLocalPort |
INTEGER |
0..65535 |
|
zxr10tcpConnRemAddress |
IpAddress |
|
|
zxr10tcpConnRemPort |
INTEGER |
0..65535 |
Defined Values
zte |
1.3.6.1.4.1.3902 |
OBJECT IDENTIFIER |
|
|
|
zxr10 |
1.3.6.1.4.1.3902.3 |
OBJECT IDENTIFIER |
|
|
|
zxr10ip |
1.3.6.1.4.1.3902.3.101.1 |
OBJECT IDENTIFIER |
|
|
|
zxr10tcp |
1.3.6.1.4.1.3902.3.101.2 |
OBJECT IDENTIFIER |
|
|
|
zxr10ipvrfaddrTable |
1.3.6.1.4.1.3902.3.101.1.1 |
The description of zxr10 vrf address table.
It is a list of vrf address entries. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
Zxr10IpVrfAddrEntry |
|
zxr10ipvrfaddrEntry |
1.3.6.1.4.1.3902.3.101.1.1.1 |
A vrf address entry containing objects that
vrf interface address infomation,such as:
vrf ifindex, vrf address, mask. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
Zxr10IpVrfAddrEntry |
|
|
zxr10ipVrfVpnName |
1.3.6.1.4.1.3902.3.101.1.1.1.1 |
The IP address of this vrf interface. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..64) |
|
zxr10ipVrfAddr |
1.3.6.1.4.1.3902.3.101.1.1.1.2 |
The IP address of this vrf interface. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
zxr10ipVrfNetMask |
1.3.6.1.4.1.3902.3.101.1.1.1.3 |
The subnet mask associated with the IP address of
this vrf interface. The value of the mask is an IP
address with all the network bits set to 1 and all
the hosts bits set to 0. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
zxr10ipVrfIfIndex |
1.3.6.1.4.1.3902.3.101.1.1.1.4 |
The index value which uniquely identifies the vrf
interface. The interface identified by a particular value of this
index is the same interface as identified by the
same value of ifIndex. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
zxr10ipVrfBcastAddr |
1.3.6.1.4.1.3902.3.101.1.1.1.5 |
The value of the least-significant bit in the IP
broadcast address used for sending datagrams on
the vrf interface associated with the IP address.
For example, when the Internet standard all-ones
broadcast address is used, the value will be 1.
This value applies to both the subnet and network
broadcasts addresses used by the vrf interface. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
zxr10ipVrfReasmMaxSize |
1.3.6.1.4.1.3902.3.101.1.1.1.6 |
The size of the largest IP datagram which this
vrf interface can re-assemble from incoming IP fragmented
datagrams received on this interface. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..65535 |
|
zxr10tcpConnTable |
1.3.6.1.4.1.3902.3.101.2.1 |
A table containing TCP connection-specific
information. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
Zxr10TcpConnEntry |
|
zxr10tcpconnEntry |
1.3.6.1.4.1.3902.3.101.2.1.1 |
Information about a particular current TCP
connection. An object of this type is transient,
in that it ceases to exist when (or soon after)
the connection makes the transition to the CLOSED
state. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
Zxr10TcpConnEntry |
|
|
zxr10tcpConnState |
1.3.6.1.4.1.3902.3.101.2.1.1.2 |
The state of this TCP connection.
The only value which may be set by a management
station is deleteTCB(12). Accordingly, it is
appropriate for an agent to return a `badValue'
response if a management station attempts to set
this object to any other value.
If a management station sets this object to the
value deleteTCB(12), then this has the effect of
deleting the TCB (as defined in RFC 793) of the
corresponding connection on the managed node,
resulting in immediate termination of the
connection.
As an implementation-specific option, a RST
segment may be sent from the managed node to the
other TCP endpoint (note however that RST segments
are not sent reliably). |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
closed(1), listen(2), synSent(3), synReceived(4), established(5), finWait1(6), finWait2(7), closeWait(8), lastAck(9), closing(10), timeWait(11), deleteTCB(12) |
|
zxr10tcpConnLocalAddress |
1.3.6.1.4.1.3902.3.101.2.1.1.3 |
The local IP address for this TCP connection. In
the case of a connection in the listen state which
is willing to accept connections for any IP
interface associated with the node, the value
0.0.0.0 is used. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
zxr10tcpConnLocalPort |
1.3.6.1.4.1.3902.3.101.2.1.1.4 |
The local port number for this TCP connection. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..65535 |
|
zxr10tcpConnRemAddress |
1.3.6.1.4.1.3902.3.101.2.1.1.5 |
The remote IP address for this TCP connection. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
zxr10tcpConnRemPort |
1.3.6.1.4.1.3902.3.101.2.1.1.6 |
The remote port number for this TCP connection. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..65535 |
|