ZTE-AN-GPON-ONUPRF-MIB

File: ZTE-AN-GPON-ONUPRF-MIB.mib (133683 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC SNMPv2-CONF
ZTE-AN-SMI ZTE-AN-PON-TC-MIB ZTE-AN-PON-REMOTE-ONU-MIB
INET-ADDRESS-MIB

Imported symbols

MODULE-IDENTITY OBJECT-TYPE Integer32
Unsigned32 RowStatus DisplayString
NOTIFICATION-GROUP MODULE-COMPLIANCE OBJECT-GROUP
zxAnPon ZxAnGponOnuTcontIndex ZxAnGponOnuGemPortIndex
ZxAnGponOnuVportIndex zxAnPonRmOnuIfIndex InetAddress
InetAddressType InetAddressPrefixLength

Defined Types

ZxAnGponOPTcontEntry  
SEQUENCE    
  zxAnGponOPName DisplayString
  zxAnGponOPTcontIndex ZxAnGponOnuTcontIndex
  zxAnGponOPTcontName DisplayString
  zxAnGponOPTcontBwPrfName DisplayString
  zxAnGponOPTcontDbaGapMode INTEGER
  zxAnGponOPTcontRowStatus RowStatus

ZxAnGponOPGemPortEntry  
SEQUENCE    
  zxAnGponOPGemPortIndex ZxAnGponOnuGemPortIndex
  zxAnGponOPGemPortName DisplayString
  zxAnGponOPGemPortTcontIndex ZxAnGponOnuTcontIndex
  zxAnGponOPGemPortQueueOfTcont Integer32
  zxAnGponOPGemPortEncrypt INTEGER
  zxAnGponOPGemPortRowStatus RowStatus

ZxAnGponOPMappingEntry  
SEQUENCE    
  zxAnGponOPMappingName DisplayString
  zxAnGponOPMappingGemPort Integer32
  zxAnGponOPMappingIfId Integer32
  zxAnGponOPMappingType INTEGER
  zxAnGponOPMappingCos Integer32
  zxAnGponOPMappingVid OCTET STRING
  zxAnGponOPMappingRowStatus RowStatus

ZxAnGponOPOnuConfEntry  
SEQUENCE    
  zxAnGponOPOnuConfVportMode INTEGER
  zxAnGponOPOnuConfUsFecEnable INTEGER

ZxAnGponOPBpConfEntry  
SEQUENCE    
  zxAnGponOPBpVportId ZxAnGponOnuVportIndex
  zxAnGponOPBpName DisplayString
  zxAnGponOPBpMapType INTEGER
  zxAnGponOPBpRowStatus RowStatus

ZxAnGponOPBpMapConfEntry  
SEQUENCE    
  zxAnGponOPBpMapConfCos Integer32
  zxAnGponOPBpMapConfVid Integer32
  zxAnGponOPBpMapConfRowStatus RowStatus

ZxAnGponOPTcontQueueSchedEntry  
SEQUENCE    
  zxAnGponOPTcontQueueSchedPrfName DisplayString

ZxAnGponOPGemPortCurrPerfEntry  
SEQUENCE    
  zxAnGponOPGemPortCurrRowStatus RowStatus

ZxAnGponOPVlanPortEntry  
SEQUENCE    
  zxAnGponOPVlanPortMode INTEGER
  zxAnGponOPVlanPortDefaultVid Integer32
  zxAnGponOPVlanPortDefaultCos Integer32
  zxAnGponOPVlanPortVlanList DisplayString

ZxAnGponOPVlanPortCmdEntry  
SEQUENCE    
  zxAnGponOPVlanPortCmd INTEGER
  zxAnGponOPVlanPortVid Integer32

ZxAnGponOPVlanTransEntry  
SEQUENCE    
  zxAnGponOPVlanTransUserVid Integer32
  zxAnGponOPVlanTransUserCos Integer32
  zxAnGponOPVlanTransCVid Integer32
  zxAnGponOPVlanTransCtagCos Integer32
  zxAnGponOPVlanTransSVid Integer32
  zxAnGponOPVlanTransStagCos Integer32
  zxAnGponOPVlanTransRowStatus RowStatus

ZxAnGponOPMVlanEntry  
SEQUENCE    
  zxAnGponOPMVid Integer32
  zxAnGponOPMVlanRowStatus RowStatus

ZxAnGponOPIgmpConfEntry  
SEQUENCE    
  zxAnGponOPIgmpUsedPrfName DisplayString
  zxAnGponOPIgmpMaxGroups Integer32
  zxAnGponOPIgmpMaxBw Unsigned32
  zxAnGponOPIgmpBwEnforce INTEGER
  zxAnGponOPIgmpConfRowStatus RowStatus

ZxAnGponOPTrafficSchedEntry  
SEQUENCE    
  zxAnGponOPTrafficSchedPrfName DisplayString

ZxAnGponOPExtVlanEntry  
SEQUENCE    
  zxAnGponOPExtVlanInputTpid Integer32
  zxAnGponOPExtVlanOutputTpid Integer32
  zxAnGponOPExtVlanDsMode INTEGER
  zxAnGponOPExtVlanDscp2CosPrf DisplayString
  zxAnGponOPExtVlanRowStatus RowStatus

ZxAnGponOPExtVlanRuleConfEntry  
SEQUENCE    
  zxAnGponOPExtVlanConfFiltRule DisplayString
  zxAnGponOPExtVlanConfTreatRule DisplayString
  zxAnGponOPExtVlanConfRowStatus RowStatus

ZxAnGponOPBrgConfEntry  
SEQUENCE    
  zxAnGponOPBrgIndex Integer32
  zxAnGponOPBrgStpEnable INTEGER
  zxAnGponOPBrgLearningEnable INTEGER
  zxAnGponOPBrgLocalBridgeEnable INTEGER
  zxAnGponOPBrgPri Integer32
  zxAnGponOPBrgMaxAge Integer32
  zxAnGponOPBrgHelloTime Integer32
  zxAnGponOPBrgForwardDelay Integer32
  zxAnGponOPBrgUnknownMacDiscard INTEGER
  zxAnGponOPBrgMacLearningDepth Integer32
  zxAnGponOPBrgAgingTime Integer32

ZxAnGponOPWanIpConfEntry  
SEQUENCE    
  zxAnGponOPWanIpIndex Integer32
  zxAnGponOPWanIpMode INTEGER
  zxAnGponOPWanVlanPrf DisplayString
  zxAnGponOPWanHostId Integer32
  zxAnGponOPWanOnuIdentifier DisplayString
  zxAnGponOPWanPppoeAuthMode INTEGER
  zxAnGponOPWanPppoeUsername DisplayString
  zxAnGponOPWanPppoePassword DisplayString
  zxAnGponOPWanRspPing INTEGER
  zxAnGponOPWanRspTraceRoute INTEGER
  zxAnGponOPWanRsEnable INTEGER
  zxAnGponOPWanOnLinkPrefix OCTET STRING
  zxAnGponOPWanPppoeServiceName DisplayString
  zxAnGponOPWanIpConfRowStatus RowStatus

ZxAnGponOPVoipConfEntry  
SEQUENCE    
  zxAnGponOPVoipSignalProtoUsed INTEGER
  zxAnGponOPVoipConfMethodUsed INTEGER
  zxAnGponOPVoipDomainName DisplayString
  zxAnGponOPVoipH248EquipName DisplayString
  zxAnGponOPVoipH248RegMode INTEGER
  zxAnGponOPVoipMgcRegMode INTEGER
  zxAnGponOPVoipLineName DisplayString
  zxAnGponOPVoipIpAllocMode INTEGER
  zxAnGponOPVoipSvrAddr DisplayString
  zxAnGponOPVoipSvrValidation INTEGER
  zxAnGponOPVoipSvrUsername DisplayString
  zxAnGponOPVoipSvrPassword DisplayString
  zxAnGponOPVoipSvrRealm DisplayString
  zxAnGponOPVoipSvrRetrieveFile INTEGER

ZxAnGponOPVoipIpConfEntry  
SEQUENCE    
  zxAnGponOPVoipIpSlotId Integer32
  zxAnGponOPVoipIpMediaIndex INTEGER
  zxAnGponOPVoipIpMode INTEGER
  zxAnGponOPVoipIpPrf DisplayString
  zxAnGponOPVoipIpVlanPrf DisplayString
  zxAnGponOPVoipIpHostId Integer32
  zxAnGponOPVoipIpOnuIdentifier DisplayString
  zxAnGponOPVoipIpAddrType InetAddressType
  zxAnGponOPVoipIpAddr InetAddress
  zxAnGponOPVoipIpAddrPfxLen InetAddressPrefixLength
  zxAnGponOPVoipIpPppoeMode INTEGER
  zxAnGponOPVoipIpPppoeUsername DisplayString
  zxAnGponOPVoipIpPppoePassword DisplayString
  zxAnGponOPVoipIpRspPing INTEGER
  zxAnGponOPVoipIpRspTraceRoute INTEGER
  zxAnGponOPVoipIpRsEnable INTEGER
  zxAnGponOPVoipIpOnLinkPrefix OCTET STRING
  zxAnGponOPVoipIpPppoeServiceName DisplayString
  zxAnGponOPVoipIpConfRowStatus RowStatus

ZxAnGponOPUniDhcpIpRetrieveEntry  
SEQUENCE    
  zxAnGponOPUniDhcpIpRetrieveMode INTEGER

ZxAnGponOPIpStaticRouteEntry  
SEQUENCE    
  zxAnGponOPIpRouteDestType InetAddressType
  zxAnGponOPIpRouteDest InetAddress
  zxAnGponOPIpRoutePfxLen InetAddressPrefixLength
  zxAnGponOPIpRouteNextHopType InetAddressType
  zxAnGponOPIpRouteNextHop InetAddress
  zxAnGponOPIpRouteOutPort Integer32
  zxAnGponOPIpRouteRowStatus RowStatus

ZxAnGponOPVeipEntry  
SEQUENCE    
  zxAnGponOPVeipIndex Integer32
  zxAnGponOPVeipAdminState INTEGER
  zxAnGponOPVeipInterdomainName DisplayString
  zxAnGponOPVeipIsPortAssigned INTEGER
  zxAnGponOPVeipProtoType INTEGER
  zxAnGponOPVeipAssignedPort Integer32
  zxAnGponOPVeipHostId Integer32

ZxAnGponOPTr069AcsEntry  
SEQUENCE    
  zxAnGponOPTr069AcsAdminState INTEGER
  zxAnGponOPTr069AcsUri DisplayString
  zxAnGponOPTr069AcsValidation INTEGER
  zxAnGponOPTr069AcsUsername DisplayString
  zxAnGponOPTr069AcsPassword DisplayString
  zxAnGponOPTr069AcsRealm DisplayString
  zxAnGponOPTr069AssociatedTag Integer32

ZxAnGponOPEthUniEntry  
SEQUENCE    
  zxAnGponOPEthUniExpectedType Integer32
  zxAnGponOPEthUniIfSpeedConf INTEGER
  zxAnGponOPEthUniLoopbackConf INTEGER
  zxAnGponOPEthUniAdminState INTEGER
  zxAnGponOPEthUniMaxFrameSize Integer32
  zxAnGponOPEthUniDteOrDceInd INTEGER
  zxAnGponOPEthUniPauseTime Integer32
  zxAnGponOPEthUniBridgeOrIpInd INTEGER
  zxAnGponOPEthUniArcEnable INTEGER
  zxAnGponOPEthUniArcInterval Integer32
  zxAnGponOPEthUniPppoeFilter INTEGER
  zxAnGponOPEthUniPowerFeed INTEGER
  zxAnGponOPEthUniLoopDetect INTEGER

Defined Values

zxAnGponOnuPrfMib 1.3.6.1.4.1.3902.1082.500.21
The MIB module for the management of GPON ONU profile.
MODULE-IDENTITY    

zxAnGponOnuPrfObjects 1.3.6.1.4.1.3902.1082.500.21.2
OBJECT IDENTIFIER    

zxAnGponOnuLinePrfObjects 1.3.6.1.4.1.3902.1082.500.21.2.1
OBJECT IDENTIFIER    

zxAnGponOnuServicePrfObjects 1.3.6.1.4.1.3902.1082.500.21.2.2
OBJECT IDENTIFIER    

zxAnGponOnuPrfConformance 1.3.6.1.4.1.3902.1082.500.21.4
OBJECT IDENTIFIER    

zxAnGponOPTcontTable 1.3.6.1.4.1.3902.1082.500.21.2.1.2
The ONU profile T-CONT table.
OBJECT-TYPE    
  SEQUENCE OF  
    ZxAnGponOPTcontEntry

zxAnGponOPTcontEntry 1.3.6.1.4.1.3902.1082.500.21.2.1.2.1
The ONU profile T-CONT entry.
OBJECT-TYPE    
  ZxAnGponOPTcontEntry  

zxAnGponOPName 1.3.6.1.4.1.3902.1082.500.21.2.1.2.1.1
Name of ONU profile.
OBJECT-TYPE    
  DisplayString Size(1..64)  

zxAnGponOPTcontIndex 1.3.6.1.4.1.3902.1082.500.21.2.1.2.1.2
An arbitrary (unique) integer for identifying an entry in the table, from 1 to upper limit supported T-CONT count of ONU type.
OBJECT-TYPE    
  ZxAnGponOnuTcontIndex  

zxAnGponOPTcontName 1.3.6.1.4.1.3902.1082.500.21.2.1.2.1.3
Name of the T-CONT.
OBJECT-TYPE    
  DisplayString Size(0..64)  

zxAnGponOPTcontBwPrfName 1.3.6.1.4.1.3902.1082.500.21.2.1.2.1.4
The name of profile used by T-CONT bandwidth configuration.
OBJECT-TYPE    
  DisplayString Size(0..64)  

zxAnGponOPTcontDbaGapMode 1.3.6.1.4.1.3902.1082.500.21.2.1.2.1.5
The DBA gap mode. For GPON ONU, the explanations of these modes are as follows: mode0 is one frame, mode1 is two frames, mode2 is four frames, mode3 is eight frames. default is the system default policy. For example, 'two frames' indicates that T-CONT will perform DBA in a gap of two data frames.
OBJECT-TYPE    
  INTEGER mode0(1), mode1(2), mode2(3), mode3(4), default(11)  

zxAnGponOPTcontRowStatus 1.3.6.1.4.1.3902.1082.500.21.2.1.2.1.50
The status of this conceptual row. To create a row in this table, a manager must set this object to createAndGo(4). To delete a row in this table, a manager must set this object to destroy(6). To query this object, always return 1.
OBJECT-TYPE    
  RowStatus  

zxAnGponOPGemPortTable 1.3.6.1.4.1.3902.1082.500.21.2.1.3
The ONU profile GEM port table.
OBJECT-TYPE    
  SEQUENCE OF  
    ZxAnGponOPGemPortEntry

zxAnGponOPGemPortEntry 1.3.6.1.4.1.3902.1082.500.21.2.1.3.1
The ONU profile GEM port entry.
OBJECT-TYPE    
  ZxAnGponOPGemPortEntry  

zxAnGponOPGemPortIndex 1.3.6.1.4.1.3902.1082.500.21.2.1.3.1.1
An arbitrary (unique) integer for identifying an entry in the table, from 1 to upper limit supported GEM port count of ONU type.
OBJECT-TYPE    
  ZxAnGponOnuGemPortIndex  

zxAnGponOPGemPortName 1.3.6.1.4.1.3902.1082.500.21.2.1.3.1.2
Name of the GEM port.
OBJECT-TYPE    
  DisplayString Size(0..64)  

zxAnGponOPGemPortTcontIndex 1.3.6.1.4.1.3902.1082.500.21.2.1.3.1.3
It is equal to the 'zxAnGponOPTcontIndex' of 'zxAnGponOPTcontTable'.
OBJECT-TYPE    
  ZxAnGponOnuTcontIndex  

zxAnGponOPGemPortQueueOfTcont 1.3.6.1.4.1.3902.1082.500.21.2.1.3.1.4
The queue (index from 0 to 7) of T-CONT for this GEM port. Queue 7 is the highest priority queue.
OBJECT-TYPE    
  Integer32 0..7  

zxAnGponOPGemPortEncrypt 1.3.6.1.4.1.3902.1082.500.21.2.1.3.1.5
The encrypt state of this GEM port.
OBJECT-TYPE    
  INTEGER downstreamEncrypt(1), noEncrypt(2), bothDirectEncrypt(3)  

zxAnGponOPGemPortRowStatus 1.3.6.1.4.1.3902.1082.500.21.2.1.3.1.50
The status of this conceptual row. To create a row in this table, a manager must set this object to createAndGo(4). In particular, a newly created row cannot be created until the corresponding 'zxAnGponOPGemPortTcontIndex' has been set. To delete a row in this table, a manager must set this object to destroy(6). To query this object, always return 1.
OBJECT-TYPE    
  RowStatus  

zxAnGponOPMappingTable 1.3.6.1.4.1.3902.1082.500.21.2.1.4
The ONU profile mapping table.
OBJECT-TYPE    
  SEQUENCE OF  
    ZxAnGponOPMappingEntry

zxAnGponOPMappingEntry 1.3.6.1.4.1.3902.1082.500.21.2.1.4.1
The ONU profile mapping entry.
OBJECT-TYPE    
  ZxAnGponOPMappingEntry  

zxAnGponOPMappingName 1.3.6.1.4.1.3902.1082.500.21.2.1.4.1.1
Name of service.
OBJECT-TYPE    
  DisplayString Size(1..32)  

zxAnGponOPMappingGemPort 1.3.6.1.4.1.3902.1082.500.21.2.1.4.1.2
GEM port index of service.
OBJECT-TYPE    
  Integer32 1..255  

zxAnGponOPMappingIfId 1.3.6.1.4.1.3902.1082.500.21.2.1.4.1.3
4bytes value contains:type (MSB 2bytes)/ifId (LSB 2bytes). type means 0 bridge 1 ethuni 2 iphost 3 wifiuni 4 veip 5 wan If type is 'bridge', then the 2-byte ifId has no meaning, just keep it zero; If type is 'ethuni', then the 2-byte ifId contains: slot (MSB 1byte)/port (LSB 1byte); If type is 'iphost', then the 2-byte ifId means the ID of iphost, range from 1 to 255; If type is 'wifiuni', then the 2-byte ifId contains: slot (MSB 1byte)/port (LSB 1byte); If type is 'veip', then the 2-byte ifId means the ID of VEIP, range from 1 to 255; If type is 'wan', then the 2-byte ifId means the ID of WAN, range from 1 to 255.
OBJECT-TYPE    
  Integer32  

zxAnGponOPMappingType 1.3.6.1.4.1.3902.1082.500.21.2.1.4.1.4
Map type of service. - cos: mapping to GEM port by CoS value - vlan: mapping to GEM port by VLAN value - cosAndVlan: mapping to GEM port by both cos and VLAN value - transparent: mapping to GEM port transparently - untag: mapping to GEMP port for untag frames
OBJECT-TYPE    
  INTEGER cos(1), vlan(2), cosAndVlan(3), transparent(4), untag(5)  

zxAnGponOPMappingCos 1.3.6.1.4.1.3902.1082.500.21.2.1.4.1.5
A bitfield defines the frames with the priority related with this service. MSB stands for priority 7, LSB stands for priority 0. A bit value of 0 specifies that frames with the associated priority are to be discarded.
OBJECT-TYPE    
  Integer32 0..255  

zxAnGponOPMappingVid 1.3.6.1.4.1.3902.1082.500.21.2.1.4.1.6
Each 2 bytes stand for the VLAN ID related with this service. The first N*2 bytes are valid, until VLAN ID=0.
OBJECT-TYPE    
  OCTET STRING Size(24)  

zxAnGponOPMappingRowStatus 1.3.6.1.4.1.3902.1082.500.21.2.1.4.1.50
The status of this conceptual row. The state of this conceptual row only support 'not exist' and 'active'. The action of this conceptual row only support 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4), and must comply with the multi-variables usage rules in 'zxAnGponOPMappingEntry' description. To delete a row in this table, a manager must set this object to destroy(6). To query this object, always return 1.
OBJECT-TYPE    
  RowStatus  

zxAnGponOPOnuConfTable 1.3.6.1.4.1.3902.1082.500.21.2.1.5
The ONU profile ONU configuration table.
OBJECT-TYPE    
  SEQUENCE OF  
    ZxAnGponOPOnuConfEntry

zxAnGponOPOnuConfEntry 1.3.6.1.4.1.3902.1082.500.21.2.1.5.1
The ONU profile ONU configuration entry.
OBJECT-TYPE    
  ZxAnGponOPOnuConfEntry  

zxAnGponOPOnuConfVportMode 1.3.6.1.4.1.3902.1082.500.21.2.1.5.1.1
The VPort mode. gemport(1): a related VPort will be created automatically when a GEM port is created. manual(3): VPort will be created manually.
OBJECT-TYPE    
  INTEGER gemport(1), manual(3)  

zxAnGponOPOnuConfUsFecEnable 1.3.6.1.4.1.3902.1082.500.21.2.1.5.1.2
Enables or disables the ONU upstream FEC function. enabled(1): enable the ONU upstream FEC function. disabled(2): disable the ONU upstream FEC function. auto(3): system will enable or disable the ONU upstream FEC function automatically according to the system automation rule. default(4): system will enable or disable the ONU upstream FEC function according to the system default rule.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2), auto(3), default(4)  

zxAnGponOPBpConfTable 1.3.6.1.4.1.3902.1082.500.21.2.1.6
The ONU profile VPort table.
OBJECT-TYPE    
  SEQUENCE OF  
    ZxAnGponOPBpConfEntry

zxAnGponOPBpConfEntry 1.3.6.1.4.1.3902.1082.500.21.2.1.6.1
The ONU profile VPort entry.
OBJECT-TYPE    
  ZxAnGponOPBpConfEntry  

zxAnGponOPBpVportId 1.3.6.1.4.1.3902.1082.500.21.2.1.6.1.1
VPort ID.
OBJECT-TYPE    
  ZxAnGponOnuVportIndex  

zxAnGponOPBpName 1.3.6.1.4.1.3902.1082.500.21.2.1.6.1.2
Name of the VPort.
OBJECT-TYPE    
  DisplayString Size(0..64)  

zxAnGponOPBpMapType 1.3.6.1.4.1.3902.1082.500.21.2.1.6.1.3
Map type of GEM port and VPort. cos(1): mapping by CoS value. vlan(2): mapping by VLAN value. cosPlusVlan(3): mapping by CoS and VLAN value. oneToOne(4): mapping is 1:1 between GEM port and VPort.
OBJECT-TYPE    
  INTEGER cos(1), vlan(2), cosPlusVlan(3), oneToOne(4)  

zxAnGponOPBpRowStatus 1.3.6.1.4.1.3902.1082.500.21.2.1.6.1.50
The status of this conceptual row. The supported actions of this conceptual row only include: To create a row in this table, a manager must set this object to createAndGo(4). To delete a row in this table, a manager must set this object to destroy(6). To query this object, always return 1.
OBJECT-TYPE    
  RowStatus  

zxAnGponOPBpMapConfTable 1.3.6.1.4.1.3902.1082.500.21.2.1.7
The ONU profile VPort mapping table.
OBJECT-TYPE    
  SEQUENCE OF  
    ZxAnGponOPBpMapConfEntry

zxAnGponOPBpMapConfEntry 1.3.6.1.4.1.3902.1082.500.21.2.1.7.1
The ONU profile VPort mapping entry.
OBJECT-TYPE    
  ZxAnGponOPBpMapConfEntry  

zxAnGponOPBpMapConfCos 1.3.6.1.4.1.3902.1082.500.21.2.1.7.1.1
A CoS value (0..7) referenced by a GEM port mapped to a VPort.
OBJECT-TYPE    
  Integer32 0..7  

zxAnGponOPBpMapConfVid 1.3.6.1.4.1.3902.1082.500.21.2.1.7.1.2
A VLAN ID referenced by a GEM port mapped to a VPort. The value 65535 indicates the untagged frames. When VPort mapping type is oneToOne(4) or cos(1), this value is 0.
OBJECT-TYPE    
  Integer32 0..4094 | 65535  

zxAnGponOPBpMapConfRowStatus 1.3.6.1.4.1.3902.1082.500.21.2.1.7.1.50
The status of this conceptual row. The supported actions of this conceptual row only include: To create a row in this table, a manager must set this object to createAndGo(4). To delete a row in this table, a manager must set this object to destroy(6). To query this object, always return 1.
OBJECT-TYPE    
  RowStatus  

zxAnGponOPTcontQueueSchedTable 1.3.6.1.4.1.3902.1082.500.21.2.1.8
The ONU profile T-CONT queue schedule table.
OBJECT-TYPE    
  SEQUENCE OF  
    ZxAnGponOPTcontQueueSchedEntry

zxAnGponOPTcontQueueSchedEntry 1.3.6.1.4.1.3902.1082.500.21.2.1.8.1
The ONU profile T-CONT queue schedule entry.
OBJECT-TYPE    
  ZxAnGponOPTcontQueueSchedEntry  

zxAnGponOPTcontQueueSchedPrfName 1.3.6.1.4.1.3902.1082.500.21.2.1.8.1.1
The T-CONT queue schedule profile name, this profile is defined in zxAnGponRmTrafficSchedPrfTable. The empty string indicates that no profile is bound to this T-CONT.
OBJECT-TYPE    
  DisplayString Size(0..64)  

zxAnGponOPGemPortCurrPerfTable 1.3.6.1.4.1.3902.1082.500.21.2.1.9
The ONU profile GPON GEM port current performance table.
OBJECT-TYPE    
  SEQUENCE OF  
    ZxAnGponOPGemPortCurrPerfEntry

zxAnGponOPGemPortCurrPerfEntry 1.3.6.1.4.1.3902.1082.500.21.2.1.9.1
The ONU profile GPON GEM port current performance entry.
OBJECT-TYPE    
  ZxAnGponOPGemPortCurrPerfEntry  

zxAnGponOPGemPortCurrRowStatus 1.3.6.1.4.1.3902.1082.500.21.2.1.9.1.50
The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4). To delete a row in this table, a manager must set this object to destroy(6). To query this object, always return 1.
OBJECT-TYPE    
  RowStatus  

zxAnGponOPVlanPortTable 1.3.6.1.4.1.3902.1082.500.21.2.2.2
The ONU profile port VLAN table. A table containing VLAN port information for VLANs configured into the bridge by (local or network) management, specifying the set of ports to which frames received on a VLAN for this FDB and containing a specific Group destination address are allowed to be forwarded. When a manager wants to create a VLAN port,it must comply with the multi-variables usage rule that all the mib variables related to same fuction must be in one snmp set operation, the variables have two type: mandatory and optional. Mandatory variables must be in the one snmp set operation. Optional variables may be in the one snmp set operation with the mandatory variables, but must not be used alone. To modify a service port, there are several cases base on the variable zxAnGponOPVlanPortMode, and the mandatory and optional variables for each case are different. Case 1: to modify a VLAN port when zxAnGponOPVlanPortMode is access(1): - mandatoty: zxAnGponOPVlanPortMode, - optional : zxAnGponOPVlanPortDefaultVid, zxAnGponOPVlanPortDefaultCos, Case 2: to modify a service port when zxAnGponOPVlanPortMode is trunk(2): - mandatoty: zxAnGponOPVlanPortMode, - optional : Case 3: to modify a service port when zxAnGponOPVlanPortMode is hybrid(3): - mandatoty: zxAnGponOPVlanPortMode, - optional : zxAnGponOPVlanPortDefaultVid, zxAnGponOPVlanPortDefaultCos, Case 4: to modify a service port when zxAnGponOPVlanPortMode is transparent(4): - mandatoty: zxAnGponOPVlanPortMode, - optional : Case 5: to modify a service port when zxAnGponOPVlanPortMode is none(5): - mandatoty: zxAnGponOPVlanPortMode, - optional :
OBJECT-TYPE    
  SEQUENCE OF  
    ZxAnGponOPVlanPortEntry

zxAnGponOPVlanPortEntry 1.3.6.1.4.1.3902.1082.500.21.2.2.2.1
The ONU profile port VLAN entry. Supporting Ethernet UNI, WiFi UNI, VEIP, GEM port, multicast GEM port, WAN and xDSL UNI.
OBJECT-TYPE    
  ZxAnGponOPVlanPortEntry  

zxAnGponOPVlanPortMode 1.3.6.1.4.1.3902.1082.500.21.2.2.2.1.3
The access mode of the port. There are five types: - access: access mode of port access - trunk: trunk mode of port access - hybrid: hybrid mode of port access - transparent: transparent mode of port access - none: delete all the VLAN configuration of the port, restore to ONU's internal policy.
OBJECT-TYPE    
  INTEGER access(1), trunk(2), hybrid(3), transparent(4), none(5)  

zxAnGponOPVlanPortDefaultVid 1.3.6.1.4.1.3902.1082.500.21.2.2.2.1.4
The PVID of the port.
OBJECT-TYPE    
  Integer32 1..4094  

zxAnGponOPVlanPortDefaultCos 1.3.6.1.4.1.3902.1082.500.21.2.2.2.1.5
The default priority of the port.
OBJECT-TYPE    
  Integer32 0..7  

zxAnGponOPVlanPortVlanList 1.3.6.1.4.1.3902.1082.500.21.2.2.2.1.6
The VLAN sequence of the port.
OBJECT-TYPE    
  DisplayString  

zxAnGponOPVlanPortCmdTable 1.3.6.1.4.1.3902.1082.500.21.2.2.3
The port VLAN operation command table. This table is used for ONU profile.
OBJECT-TYPE    
  SEQUENCE OF  
    ZxAnGponOPVlanPortCmdEntry

zxAnGponOPVlanPortCmdEntry 1.3.6.1.4.1.3902.1082.500.21.2.2.3.1
The port VLAN operation command entry. Supporting Ethernet UNI, WiFi UNI, VEIP, GEM port, multicast GEM port, WAN and xDSL UNI.
OBJECT-TYPE    
  ZxAnGponOPVlanPortCmdEntry  

zxAnGponOPVlanPortCmd 1.3.6.1.4.1.3902.1082.500.21.2.2.3.1.1
The command to operate VLAN list of 'zxAnGponOPVlanPortTable'. The multi-variables binding rule should be complied with when a manager configures port VLAN cmd. According to this rule, all the related mib variables must be included in one SNMP set operation. There are two types of variables: mandatory and optional. All of the mandatory variables must be included in one SNMP set operation. Optional variables may be included in one SNMP set operation with the mandatory variables, but must not be used alone. To configure VLAN, the mandatory and optional variables are as follows: mandatoty: zxAnGponOPVlanPortCmd, zxAnGponOPVlanPortVid optional : none There are two groups of operation command, the first group includes addVlan and delVlan, the second group includes addAllVlan and delAllVlan. For an ONU interface, two groups of operation command can't be use at the same time. When zxAnGponOPVlanPortCmd is addAllVlan or delAllVlan and then zxAnGponOPVlanPortVid is invalid.
OBJECT-TYPE    
  INTEGER addVlan(1), delVlan(2), addAllVlan(3), delAllVlan(4)  

zxAnGponOPVlanPortVid 1.3.6.1.4.1.3902.1082.500.21.2.2.3.1.2
The port VLAN ID. This variable must comply with the multi-variables binding rule described in 'zxAnGponOPVlanPortCmd'.
OBJECT-TYPE    
  Integer32 1..4094  

zxAnGponOPVlanTransTable 1.3.6.1.4.1.3902.1082.500.21.2.2.4
The ONU profile port VLAN translation table.
OBJECT-TYPE    
  SEQUENCE OF  
    ZxAnGponOPVlanTransEntry

zxAnGponOPVlanTransEntry 1.3.6.1.4.1.3902.1082.500.21.2.2.4.1
The ONU profile port VLAN translation entry. Supporting Ethernet UNI, WiFi UNI, VEIP, GEM port, multicast GEM port, WAN and xDSL UNI.
OBJECT-TYPE    
  ZxAnGponOPVlanTransEntry  

zxAnGponOPVlanTransUserVid 1.3.6.1.4.1.3902.1082.500.21.2.2.4.1.1
User VLAN ID for translation.
OBJECT-TYPE    
  Integer32 1..4094  

zxAnGponOPVlanTransUserCos 1.3.6.1.4.1.3902.1082.500.21.2.2.4.1.2
User priority for translation, the range of priority is from 0 to 8, and '8' indicates no configuration.
OBJECT-TYPE    
  Integer32 0..8  

zxAnGponOPVlanTransCVid 1.3.6.1.4.1.3902.1082.500.21.2.2.4.1.3
Inner VLAN for VLAN translate, '0' indicates no translation. The multi-variables binding rule should be complied with when a manager configures port VLAN translate. According to this rule, all the related mib variables must be included in one SNMP set operation. There are two types of variables: mandatory and optional. All of the mandatory variables must be included in one SNMP set operation. Optional variables may be included in one SNMP set operation with the mandatory variables, but must not be used alone. To configure VLAN translation, the mandatory and optional variables are as follows: mandatoty: zxAnGponOPVlanTransSVid optional : zxAnGponOPVlanTransCVid, zxAnGponOPVlanTransCtagCos, zxAnGponOPVlanTransStagCos
OBJECT-TYPE    
  Integer32 0..4094  

zxAnGponOPVlanTransCtagCos 1.3.6.1.4.1.3902.1082.500.21.2.2.4.1.4
Inner VLAN priority for VLAN translate, '8' indicates no translation. This variable must comply with the multi-variables binding rule described in 'zxAnGponOPVlanTransCVid'.
OBJECT-TYPE    
  Integer32 0..8  

zxAnGponOPVlanTransSVid 1.3.6.1.4.1.3902.1082.500.21.2.2.4.1.5
Outer VLAN for VLAN translate, '0' indicates no SVLAN. This variable must comply with the multi-variables binding rule described in 'zxAnGponOPVlanTransCVid'.
OBJECT-TYPE    
  Integer32 0..4094  

zxAnGponOPVlanTransStagCos 1.3.6.1.4.1.3902.1082.500.21.2.2.4.1.6
Outer VLAN priority for VLAN translate, '8' indicates copy priority from inner VLAN priority. This variable must comply with the multi-variables binding rule described in 'zxAnGponOPVlanTransCVid'.
OBJECT-TYPE    
  Integer32 0..8  

zxAnGponOPVlanTransRowStatus 1.3.6.1.4.1.3902.1082.500.21.2.2.4.1.50
The status of this conceptual row. To create a row in this table, a manager must set this object to createAndGo(4). In particular, a newly created row cannot be created until the corresponding at least one of 'zxAnGponOPVlanTransCVid zxAnGponOPVlanTransCtagCos zxAnGponOPVlanTransSVid zxAnGponOPVlanTransStagCos' have been set. To delete a row in this table, a manager must set this object to destroy(6). To query this object, always return 1.
OBJECT-TYPE    
  RowStatus  

zxAnGponOPMVlanTable 1.3.6.1.4.1.3902.1082.500.21.2.2.5
The ONU profile multicast VLAN table.
OBJECT-TYPE    
  SEQUENCE OF  
    ZxAnGponOPMVlanEntry

zxAnGponOPMVlanEntry 1.3.6.1.4.1.3902.1082.500.21.2.2.5.1
The ONU profile multicast VLAN entry.
OBJECT-TYPE    
  ZxAnGponOPMVlanEntry  

zxAnGponOPMVid 1.3.6.1.4.1.3902.1082.500.21.2.2.5.1.1
This attribute represents the VLAN ID (1~4094).
OBJECT-TYPE    
  Integer32 1..4094  

zxAnGponOPMVlanRowStatus 1.3.6.1.4.1.3902.1082.500.21.2.2.5.1.50
The status of this conceptual row. The state of this conceptual row only support 'not exist' and 'active'. The action of this conceptual row only support 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4). To delete a row in this table, a manager must set this object to destroy(6). To query this object, always return 1.
OBJECT-TYPE    
  RowStatus  

zxAnGponOPIgmpConfTable 1.3.6.1.4.1.3902.1082.500.21.2.2.6
The ONU profile IGMP configuration table.
OBJECT-TYPE    
  SEQUENCE OF  
    ZxAnGponOPIgmpConfEntry

zxAnGponOPIgmpConfEntry 1.3.6.1.4.1.3902.1082.500.21.2.2.6.1
The ONU profile IGMP configuration entry. Supporting Ethernet UNI and VEIP.
OBJECT-TYPE    
  ZxAnGponOPIgmpConfEntry  

zxAnGponOPIgmpUsedPrfName 1.3.6.1.4.1.3902.1082.500.21.2.2.6.1.1
This attribute points to an instance of the multicast operations profile.
OBJECT-TYPE    
  DisplayString Size(0..64)  

zxAnGponOPIgmpMaxGroups 1.3.6.1.4.1.3902.1082.500.21.2.2.6.1.2
This attribute specifies the maximum number of dynamic multicast groups that may be replicated to the client port at any one time. The default value 0 specifies that no administrative limit is to be imposed.
OBJECT-TYPE    
  Integer32 0..1000  

zxAnGponOPIgmpMaxBw 1.3.6.1.4.1.3902.1082.500.21.2.2.6.1.3
This attribute specifies the maximum imputed dynamic bandwidth, in kbps, that may be delivered to the client port at any one time. The default value 0 specifies that no administrative limit is to be imposed.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

zxAnGponOPIgmpBwEnforce 1.3.6.1.4.1.3902.1082.500.21.2.2.6.1.4
enabled: attempts to exceed the max multicast bandwidth be counted and denied. disabled: such attempts be counted but honored.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

zxAnGponOPIgmpConfRowStatus 1.3.6.1.4.1.3902.1082.500.21.2.2.6.1.50
The status of this conceptual row. The state of this conceptual row only support 'not exist' and 'active'. The action of this conceptual row only support 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4). To delete a row in this table, a manager must set this object to destroy(6). To query this object, always return 1.
OBJECT-TYPE    
  RowStatus  

zxAnGponOPTrafficSchedTable 1.3.6.1.4.1.3902.1082.500.21.2.2.7
The ONU profile traffic scheduler configuration table.
OBJECT-TYPE    
  SEQUENCE OF  
    ZxAnGponOPTrafficSchedEntry

zxAnGponOPTrafficSchedEntry 1.3.6.1.4.1.3902.1082.500.21.2.2.7.1
The ONU profile traffic scheduler configuration entry. Supporting Ethernet UNI.
OBJECT-TYPE    
  ZxAnGponOPTrafficSchedEntry  

zxAnGponOPTrafficSchedPrfName 1.3.6.1.4.1.3902.1082.500.21.2.2.7.1.1
The ONU UNI traffic scheduler profile name. The empty string indicates no profile is bounded.
OBJECT-TYPE    
  DisplayString Size(0..64)  

zxAnGponOPExtVlanTable 1.3.6.1.4.1.3902.1082.500.21.2.2.8
The ONU profile extended VLAN configuration table.
OBJECT-TYPE    
  SEQUENCE OF  
    ZxAnGponOPExtVlanEntry

zxAnGponOPExtVlanEntry 1.3.6.1.4.1.3902.1082.500.21.2.2.8.1
The ONU profile extended VLAN configuration entry.
OBJECT-TYPE    
  ZxAnGponOPExtVlanEntry  

zxAnGponOPExtVlanInputTpid 1.3.6.1.4.1.3902.1082.500.21.2.2.8.1.1
This attribute gives the special TPID value for operations on the input (filtering) side of the table. Typical values include 0x8a88 and 0x9100. Default value is 0x8100.
OBJECT-TYPE    
  Integer32 0..65535  

zxAnGponOPExtVlanOutputTpid 1.3.6.1.4.1.3902.1082.500.21.2.2.8.1.2
This attribute gives the special TPID value for operations on the output (tagging) side of the table. Typical values include 0x8a88 and 0x9100. Default value is 0x8100.
OBJECT-TYPE    
  Integer32 0..65535  

zxAnGponOPExtVlanDsMode 1.3.6.1.4.1.3902.1082.500.21.2.2.8.1.3
Regardless of its association, the extended VLAN tagging operation configuration data ME pertains to upstream traffic. This attribute specifies the mode for downstream mapping. 1 The operation performed in the downstream direction is the inverse of that performed in the upstream direction. For one-to-one VLAN mappings, the inverse is trivially defined. Many-to-one mappings are possible, however, and these are treated as follows. If the many-to-one mapping results from multiple operation rules producing the same ANI-side tag configuration, then the first rule in the list defines the inverse operation. If the many-to-one mapping results from don't care fields in the filter being replaced with provisioned fields in the ANI-side tags, then the inverse is defined to set the corresponding fields on the ANI side with their lowest value. 2 No operation is performed in the downstream direction. 3 Filter on VID and p-bit value. On a match, perform the inverse operation on both the VID and p-bit value. If no match is found, forward the frame unmodified. 4 Filter on VID only. On a match, perform the inverse VID operation only; pass the p bits through. If no match is found, forward the frame unmodified. 5 Filter on p-bit only. On a match, perform the inverse p-bit operation only; pass the VID through. If no match is found, forward the frame unmodified. 6 Filter on VID and p-bit value. On a match, perform the inverse operation on both the VID and p-bit value. If no match is found, discard the frame. 7 Filter on VID. On a match, perform the inverse operation on the VID only; pass the p bits through. If no match is found, discard the frame. 8 Filter on p-bit only. On a match, perform the inverse p-bit operation only; pass the VID through. If no match is found, discard the frame. 9 Regardless of the filter rules, discard all downstream traffic.
OBJECT-TYPE    
  INTEGER inverseUpstream(1), noOperation(2), inverseVlanAndPriOthersForward(3), inverseVlanOthersForward(4), inversePriOthersForward(5), inverseVlanAndPriOthersDiscard(6), inverseVlanOthersDiscard(7), inversePriOthersDiscard(8), discard(9)  

zxAnGponOPExtVlanDscp2CosPrf 1.3.6.1.4.1.3902.1082.500.21.2.2.8.1.4
This attribute refers to 'zxAnGponRmDscp2CosPrfName', specifies mapping from DSCP to P-bits. The attribute can be considered a bit string sequence of 64 3-bit groups. The 64 sequence entries represent the possible values of the 6-bit DSCP field. Each 3-bit group specifies the P-bit value to which the associated DSCP value should be mapped.
OBJECT-TYPE    
  DisplayString Size(0..64)  

zxAnGponOPExtVlanRowStatus 1.3.6.1.4.1.3902.1082.500.21.2.2.8.1.50
The status of this conceptual row. The state of this conceptual row only support 'not exist' and 'active'. The action of this conceptual row only support 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4). To delete a row in this table, a manager must set this object to destroy(6). To query this object, always return 1.
OBJECT-TYPE    
  RowStatus  

zxAnGponOPExtVlanRuleConfTable 1.3.6.1.4.1.3902.1082.500.21.2.2.9
The ONU profile extended VLAN rule configuration table.
OBJECT-TYPE    
  SEQUENCE OF  
    ZxAnGponOPExtVlanRuleConfEntry

zxAnGponOPExtVlanRuleConfEntry 1.3.6.1.4.1.3902.1082.500.21.2.2.9.1
The ONU profile extended VLAN rule configuration entry.
OBJECT-TYPE    
  ZxAnGponOPExtVlanRuleConfEntry  

zxAnGponOPExtVlanConfFiltRule 1.3.6.1.4.1.3902.1082.500.21.2.2.9.1.1
This attribute refers to 'zxAnGponRmFiltRuleName' provides a unique profile of filter for this extended VLAN table.
OBJECT-TYPE    
  DisplayString Size(1..64)  

zxAnGponOPExtVlanConfTreatRule 1.3.6.1.4.1.3902.1082.500.21.2.2.9.1.2
This attribute refers to 'zxAnGponRmTrtRuleName' provides a unique profile of treatment for this extended VLAN table.
OBJECT-TYPE    
  DisplayString Size(1..64)  

zxAnGponOPExtVlanConfRowStatus 1.3.6.1.4.1.3902.1082.500.21.2.2.9.1.50
The status of this conceptual row. The state of this conceptual row only support 'not exist' and 'active'. The action of this conceptual row only support 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4). To delete a row in this table, a manager must set this object to destroy(6). To query this object, always return 1.
OBJECT-TYPE    
  RowStatus  

zxAnGponOPBrgConfTable 1.3.6.1.4.1.3902.1082.500.21.2.2.10
The ONU profile bridge configuration table.
OBJECT-TYPE    
  SEQUENCE OF  
    ZxAnGponOPBrgConfEntry

zxAnGponOPBrgConfEntry 1.3.6.1.4.1.3902.1082.500.21.2.2.10.1
The ONU profile bridge configuration entry.
OBJECT-TYPE    
  ZxAnGponOPBrgConfEntry  

zxAnGponOPBrgIndex 1.3.6.1.4.1.3902.1082.500.21.2.2.10.1.1
This attribute indicates the index of MAC bridge in ONU, from 1 to 65535. The first byte specifies the slot ID associated with this MAC bridge, the second byte specifies the bridge group ID associated with this MAC bridge.
OBJECT-TYPE    
  Integer32  

zxAnGponOPBrgStpEnable 1.3.6.1.4.1.3902.1082.500.21.2.2.10.1.2
This attribute indicates whether or not a spanning tree algorithm is enabled.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

zxAnGponOPBrgLearningEnable 1.3.6.1.4.1.3902.1082.500.21.2.2.10.1.3
This attribute indicates whether or not the learning function of the bridge is enabled.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

zxAnGponOPBrgLocalBridgeEnable 1.3.6.1.4.1.3902.1082.500.21.2.2.10.1.4
This attribute indicates whether or not the bridging between UNI ports is enabled.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

zxAnGponOPBrgPri 1.3.6.1.4.1.3902.1082.500.21.2.2.10.1.5
This attribute specifies the bridge priority in the range 0..65535. The value of this attribute is copied to the bridge priority attribute of the associated MAC bridge configuration data managed entity.
OBJECT-TYPE    
  Integer32 0..65535  

zxAnGponOPBrgMaxAge 1.3.6.1.4.1.3902.1082.500.21.2.2.10.1.6
This attribute indicates the maximum age for an entry in the spanning tree listing. It indicates the maximum age in seconds for received protocol information before it is discarded.
OBJECT-TYPE    
  Integer32 6..40  

zxAnGponOPBrgHelloTime 1.3.6.1.4.1.3902.1082.500.21.2.2.10.1.7
This attribute provides the time interval between hello packets. It is the time interval, in seconds, that a bridge advertises its presence while as a root or attempting to become a root.
OBJECT-TYPE    
  Integer32 1..10  

zxAnGponOPBrgForwardDelay 1.3.6.1.4.1.3902.1082.500.21.2.2.10.1.8
This attribute gives the time that the bridge on the Ethernet card in the ONU retains a packet before forwarding it. (It indicates the value in seconds that the bridge uses for Forward Delay when the bridge acts as the root.)
OBJECT-TYPE    
  Integer32 4..30  

zxAnGponOPBrgUnknownMacDiscard 1.3.6.1.4.1.3902.1082.500.21.2.2.10.1.9
This attribute indicates the treatment of MAC frames with unknown destination addresses. enabled: frames with unknown destination addresses will be discarded. disabled: frames with unknown destination addresses will be forwarded to all allowed ports.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

zxAnGponOPBrgMacLearningDepth 1.3.6.1.4.1.3902.1082.500.21.2.2.10.1.10
This attribute specifies the maximum number of UNI MAC addresses to be learned by the bridge. The default value 0 specifies that there is no administratively-imposed limit.
OBJECT-TYPE    
  Integer32 0..255  

zxAnGponOPBrgAgingTime 1.3.6.1.4.1.3902.1082.500.21.2.2.10.1.11
This attribute specifies the age of dynamic filtering entries in the bridge database, after which unrefreshed entries are discarded. In accordance with [IEEE 802.1D] clause 7.9.2 and [IEEE 802.1Q] clause 8.8.3, the range is 10..1 000 000 seconds, with a resolution of 1 second and a default of 300 seconds.
OBJECT-TYPE    
  Integer32 10..1000000  

zxAnGponOPWanIpConfTable 1.3.6.1.4.1.3902.1082.500.21.2.2.11
The ONU profile WAN IP configuration table.
OBJECT-TYPE    
  SEQUENCE OF  
    ZxAnGponOPWanIpConfEntry

zxAnGponOPWanIpConfEntry 1.3.6.1.4.1.3902.1082.500.21.2.2.11.1
The ONU profile WAN IP configuration entry.
OBJECT-TYPE    
  ZxAnGponOPWanIpConfEntry  

zxAnGponOPWanIpIndex 1.3.6.1.4.1.3902.1082.500.21.2.2.11.1.1
The ID of WAN IP.
OBJECT-TYPE    
  Integer32 1..255  

zxAnGponOPWanIpMode 1.3.6.1.4.1.3902.1082.500.21.2.2.11.1.2
IP address configuration mode.
OBJECT-TYPE    
  INTEGER dhcp(2), pppoe(3)  

zxAnGponOPWanVlanPrf 1.3.6.1.4.1.3902.1082.500.21.2.2.11.1.3
The name of table 'zxAnGponOPVlanPrfTable'.
OBJECT-TYPE    
  DisplayString Size(1..64)  

zxAnGponOPWanHostId 1.3.6.1.4.1.3902.1082.500.21.2.2.11.1.4
The ONU IP host ID. The value 0 indicates this attribute is not configured. The following IP host ID format is defined: MSB : Most Significant Byte LSB : Least Significant Byte | MSB | Byte 2 | Byte 1 | LSB | |--------------|-----------------------------------------------| | | |IP-type | reserved | host ID | | (8bits) | (8bits) | (1bit) | (7bits) | (8bits) | |--------------------------------------------------------------| IP-type: the IP type of host ID(1 bit) 0 represents IPv4 1 represents IPv6
OBJECT-TYPE    
  Integer32 0..33023  

zxAnGponOPWanOnuIdentifier 1.3.6.1.4.1.3902.1082.500.21.2.2.11.1.5
A unique ONU identifier string. This string, if set is provided as part of the DHCP request to allow an alternative to MAC Address in retrieving the DHCP parameters of the specified ONU. This attribute is related to 'zxAnGponOPWanIpMode'. and it is valid only when 'zxAnGponOPWanIpMode' is DHCP. Its default value is null bytes.
OBJECT-TYPE    
  DisplayString Size(0..25)  

zxAnGponOPWanPppoeAuthMode 1.3.6.1.4.1.3902.1082.500.21.2.2.11.1.6
This attribute is related to 'zxAnGponOPWanIpMode', and it is valid only when 'zxAnGponOPWanIpMode' is PPPoE.
OBJECT-TYPE    
  INTEGER auto(1), chap(2), pap(3)  

zxAnGponOPWanPppoeUsername 1.3.6.1.4.1.3902.1082.500.21.2.2.11.1.7
This attribute is related to 'zxAnGponOPWanIpMode', and it is valid only when 'zxAnGponOPWanIpMode' is PPPoE.
OBJECT-TYPE    
  DisplayString Size(0..128)  

zxAnGponOPWanPppoePassword 1.3.6.1.4.1.3902.1082.500.21.2.2.11.1.8
This attribute is related to 'zxAnGponOPWanIpMode', and it is valid only when 'zxAnGponOPWanIpMode' is PPPoE.
OBJECT-TYPE    
  DisplayString Size(0..25)  

zxAnGponOPWanRspPing 1.3.6.1.4.1.3902.1082.500.21.2.2.11.1.9
This attribute indicates whether respond to pings enabled.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

zxAnGponOPWanRspTraceRoute 1.3.6.1.4.1.3902.1082.500.21.2.2.11.1.10
This attribute indicates whether respond to trace route enabled. This attribute is only valid for IPv4 and this value is disabled(2) for IPv6.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

zxAnGponOPWanRsEnable 1.3.6.1.4.1.3902.1082.500.21.2.2.11.1.11
This attribute indicates whether respond to router solicitation (RS) messages enabled. This attribute is only valid for IPv6 and this value is disabled(2) for IPv4.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

zxAnGponOPWanOnLinkPrefix 1.3.6.1.4.1.3902.1082.500.21.2.2.11.1.12
It is the manually provisioned on-link prefix used for destination IPv6 addresses of IPv6 host services. The attribute is structured as follows: Prefix length, number of leading bits in the prefix that are valid (1 byte). Prefix (16 bytes). This attribute is only valid for IPv6 and this value is 0x0 for IPv4.
OBJECT-TYPE    
  OCTET STRING Size(17)  

zxAnGponOPWanPppoeServiceName 1.3.6.1.4.1.3902.1082.500.21.2.2.11.1.13
The PPPoE service name.
OBJECT-TYPE    
  DisplayString Size(0..60)  

zxAnGponOPWanIpConfRowStatus 1.3.6.1.4.1.3902.1082.500.21.2.2.11.1.50
The status of this conceptual row. To create a row in this table, a manager must set this object to createAndGo(4). To delete a row in this table, a manager must set this object to destroy(6). To query this object, always return 1.
OBJECT-TYPE    
  RowStatus  

zxAnGponOPVoipConfTable 1.3.6.1.4.1.3902.1082.500.21.2.2.12
The ONU profile VoIP configuration table.
OBJECT-TYPE    
  SEQUENCE OF  
    ZxAnGponOPVoipConfEntry

zxAnGponOPVoipConfEntry 1.3.6.1.4.1.3902.1082.500.21.2.2.12.1
The ONU profile VoIP configuration entry.
OBJECT-TYPE    
  ZxAnGponOPVoipConfEntry  

zxAnGponOPVoipSignalProtoUsed 1.3.6.1.4.1.3902.1082.500.21.2.2.12.1.1
This attribute indicates the type of VoIP signaling protocol used for ONU. Only one type of protocol is allowed. Valid values are: 0x01 = None 0x02 = SIP 0x03 = H.248 0x04 = MGCP 0x05 = Selected by Non-OMCI.
OBJECT-TYPE    
  INTEGER none(1), sip(2), h248(3), mgcp(4), nonOmci(5)  

zxAnGponOPVoipConfMethodUsed 1.3.6.1.4.1.3902.1082.500.21.2.2.12.1.2
This attribute indicates the ONU configuration method. 0x01 the ONU default - do not configure. 0x02 indicate use of OMCI for VoIP service configuration of the ONU. 0x03 indicate use of configuration file retrieval for VoIP service configuration of the ONU. 0x04 indicate use of TR-69 for VoIP service configuration of the ONU. 0x05 indicate use of IETF sipping config framework for VoIP service configuration of the ONU.
OBJECT-TYPE    
  INTEGER default(1), omci(2), configFile(3), tr069(4), ietf(5)  

zxAnGponOPVoipDomainName 1.3.6.1.4.1.3902.1082.500.21.2.2.12.1.3
This attribute indicates the ONU domain name that is used to locate ONU by SS when the mode of MG registered to SS is using domain name.
OBJECT-TYPE    
  DisplayString Size(0..128)  

zxAnGponOPVoipH248EquipName 1.3.6.1.4.1.3902.1082.500.21.2.2.12.1.4
This attribute indicates the ONU equipment name that is used to locate ONU by SS when the mode of MG registered to SS is using equipment name.
OBJECT-TYPE    
  DisplayString Size(0..25)  

zxAnGponOPVoipH248RegMode 1.3.6.1.4.1.3902.1082.500.21.2.2.12.1.5
This attribute indicates the MID flag.
OBJECT-TYPE    
  INTEGER ipv4(1), domainName(2), equipmentName(3)  

zxAnGponOPVoipMgcRegMode 1.3.6.1.4.1.3902.1082.500.21.2.2.12.1.6
This attribute indicates the register mode.
OBJECT-TYPE    
  INTEGER wildcard(1), individual(2)  

zxAnGponOPVoipLineName 1.3.6.1.4.1.3902.1082.500.21.2.2.12.1.7
This attribute indicates the line name sequence number. The default value is the empty string.
OBJECT-TYPE    
  DisplayString Size(0..25)  

zxAnGponOPVoipIpAllocMode 1.3.6.1.4.1.3902.1082.500.21.2.2.12.1.8
This attribute indicates the VoIP allocate mode.
OBJECT-TYPE    
  INTEGER singleIp(1), dualIp(2), multiIp(3)  

zxAnGponOPVoipSvrAddr 1.3.6.1.4.1.3902.1082.500.21.2.2.12.1.9
This attribute indicates the address of the server to contact using the method indicated in the VoIP configuration method used attribute. This attribute is only relevant for non-OMCI configuration methods. If this attribute is set to a null pointer, no address is defined by this attribute. However, the address may be defined by other methods, such as deriving it from the ONU identifier attribute of the IP host configuration data ME and using a well-known URI schema.
OBJECT-TYPE    
  DisplayString Size(0..128)  

zxAnGponOPVoipSvrValidation 1.3.6.1.4.1.3902.1082.500.21.2.2.12.1.10
This attribute indicates the user validation scheme.
OBJECT-TYPE    
  INTEGER disabled(1), md5(2), basic(3)  

zxAnGponOPVoipSvrUsername 1.3.6.1.4.1.3902.1082.500.21.2.2.12.1.11
This attribute indicates the user name for validation.
OBJECT-TYPE    
  DisplayString Size(0..50)  

zxAnGponOPVoipSvrPassword 1.3.6.1.4.1.3902.1082.500.21.2.2.12.1.12
This attribute indicates the password for validation.
OBJECT-TYPE    
  DisplayString Size(0..25)  

zxAnGponOPVoipSvrRealm 1.3.6.1.4.1.3902.1082.500.21.2.2.12.1.13
This attribute indicates a string to be displayed to users so they know which user name and password to use. This string should contain at least the name of the host performing the authentication and might additionally indicate the collection of users who might have access. An example might be 'registered_users@gotham. news .com'. The realm is a 'quoted-string' as specified in section 2.2 of the HTTP/1.1 specification.
OBJECT-TYPE    
  DisplayString Size(0..25)  

zxAnGponOPVoipSvrRetrieveFile 1.3.6.1.4.1.3902.1082.500.21.2.2.12.1.14
This attribute indicates an action. It will be set independently to notify ONU to retrieve file again.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

zxAnGponOPVoipIpConfTable 1.3.6.1.4.1.3902.1082.500.21.2.2.13
The ONU profile VoIP IP configuration table.
OBJECT-TYPE    
  SEQUENCE OF  
    ZxAnGponOPVoipIpConfEntry

zxAnGponOPVoipIpConfEntry 1.3.6.1.4.1.3902.1082.500.21.2.2.13.1
The ONU profile VoIP IP configuration entry.
OBJECT-TYPE    
  ZxAnGponOPVoipIpConfEntry  

zxAnGponOPVoipIpSlotId 1.3.6.1.4.1.3902.1082.500.21.2.2.13.1.1
This attribute indicates the index of slot in ONU. If slot ID is zero, it means the ONU is box-type, which can not plug card.
OBJECT-TYPE    
  Integer32 0..16  

zxAnGponOPVoipIpMediaIndex 1.3.6.1.4.1.3902.1082.500.21.2.2.13.1.2
This attribute indicates the whether the separation of media and signaling. If 'media' is configured,The media will use a separation IP address, otherwise media and signaling will share the same IP address.
OBJECT-TYPE    
  INTEGER signalAndMedia(1), media(2)  

zxAnGponOPVoipIpMode 1.3.6.1.4.1.3902.1082.500.21.2.2.13.1.3
This attribute indicates the IP address configuration mode.
OBJECT-TYPE    
  INTEGER static(1), dhcp(2), pppoe(3)  

zxAnGponOPVoipIpPrf 1.3.6.1.4.1.3902.1082.500.21.2.2.13.1.4
This attribute indicates the VoIP IP profile Name, it refers to 'zxAnGponRmIpPrfName'. If no profile name is indicated, this attribute is set to a empty string.
OBJECT-TYPE    
  DisplayString Size(0..64)  

zxAnGponOPVoipIpVlanPrf 1.3.6.1.4.1.3902.1082.500.21.2.2.13.1.5
This attribute indicates the VoIP IP VLAN profile Name, it refers to 'zxAnGponRmVlanPrfName'.
OBJECT-TYPE    
  DisplayString Size(1..64)  

zxAnGponOPVoipIpHostId 1.3.6.1.4.1.3902.1082.500.21.2.2.13.1.6
This attribute indicates the ONU VoIP host ID. The value 0 indicates this attribute is not configured. The following VoIP host ID format is defined: MSB : Most Significant Byte LSB : Least Significant Byte | MSB | Byte 2 | Byte 1 | LSB | |--------------|-----------------------------------------------| | | |IP-type | reserved | host ID | | (8bits) | (8bits) | (1bit) | (7bits) | (8bits) | |--------------------------------------------------------------| IP-type: the IP type of host ID(1 bit) 0 represents IPv4 1 represents IPv6
OBJECT-TYPE    
  Integer32 0..33023  

zxAnGponOPVoipIpOnuIdentifier 1.3.6.1.4.1.3902.1082.500.21.2.2.13.1.7
This attribute indicates the ONU identifier string. This attribute is relation to 'zxAnGponOPVoipIpMode'. This attribute is valid only when 'zxAnGponOPVoipIpMode' is DHCP. A unique ONU identifier string. If set to a non-null value, this string is used instead of the MAC address in retrieving DHCP parameters. If the string is shorter than 25 characters, it must be null terminated. Its default value is null bytes.
OBJECT-TYPE    
  DisplayString Size(0..25)  

zxAnGponOPVoipIpAddrType 1.3.6.1.4.1.3902.1082.500.21.2.2.13.1.8
This attribute indicates the type of IP address denoted in zxAnGponOPVoipIpAddr object.
OBJECT-TYPE    
  InetAddressType  

zxAnGponOPVoipIpAddr 1.3.6.1.4.1.3902.1082.500.21.2.2.13.1.9
This attribute indicates the VoIP IP address. This attribute is relation to 'zxAnGponOPVoipIpMode'. This attribute is valid only when 'zxAnGponOPVoipIpMode' is static.
OBJECT-TYPE    
  InetAddress  

zxAnGponOPVoipIpAddrPfxLen 1.3.6.1.4.1.3902.1082.500.21.2.2.13.1.10
This attribute indicates the VoIP IP address prefix length. This attribute is only valid for IPv4 and this value is 0 for IPv6.
OBJECT-TYPE    
  InetAddressPrefixLength  

zxAnGponOPVoipIpPppoeMode 1.3.6.1.4.1.3902.1082.500.21.2.2.13.1.11
This attribute indicates the VoIP IP PPPoE mode. This attribute is relation to 'zxAnGponOPVoipIpMode'. This attribute is valid only when 'zxAnGponOPVoipIpMode' is PPPoE.
OBJECT-TYPE    
  INTEGER auto(1), chap(2), pap(3)  

zxAnGponOPVoipIpPppoeUsername 1.3.6.1.4.1.3902.1082.500.21.2.2.13.1.12
This attribute indicates the VoIP IP PPPoE user name. This attribute is relation to 'zxAnGponOPVoipIpMode'. This attribute is valid only when 'zxAnGponOPVoipIpMode' is PPPoE.
OBJECT-TYPE    
  DisplayString Size(0..128)  

zxAnGponOPVoipIpPppoePassword 1.3.6.1.4.1.3902.1082.500.21.2.2.13.1.13
This attribute indicates the VoIP IP PPPoE password. This attribute is relation to 'zxAnGponOPVoipIpMode'. This attribute is valid only when 'zxAnGponOPVoipIpMode' is PPPoE.
OBJECT-TYPE    
  DisplayString Size(0..25)  

zxAnGponOPVoipIpRspPing 1.3.6.1.4.1.3902.1082.500.21.2.2.13.1.14
This attribute indicates whether respond to pings enabled.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

zxAnGponOPVoipIpRspTraceRoute 1.3.6.1.4.1.3902.1082.500.21.2.2.13.1.15
This attribute indicates whether respond to trace route enabled. This attribute is only valid for IPv4 and this value is disabled(2) for IPv6.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

zxAnGponOPVoipIpRsEnable 1.3.6.1.4.1.3902.1082.500.21.2.2.13.1.16
This attribute indicates enabling or disabling response to router solicitation (RS) messages function. This attribute is only valid for IPv6 and this value is disabled(2) for IPv4.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

zxAnGponOPVoipIpOnLinkPrefix 1.3.6.1.4.1.3902.1082.500.21.2.2.13.1.17
This attribute indicates the manually provisioned on-link prefix used for destination IPv6 addresses of IPv6 host services. The attribute is structured as follows: Prefix length, number of leading bits in the prefix that are valid (1 byte)+ prefix (16 bytes). This attribute is only valid for IPv6 and this value is 0x0 for IPv4.
OBJECT-TYPE    
  OCTET STRING Size(17)  

zxAnGponOPVoipIpPppoeServiceName 1.3.6.1.4.1.3902.1082.500.21.2.2.13.1.18
This attribute indicates the PPPoE service name.
OBJECT-TYPE    
  DisplayString Size(0..60)  

zxAnGponOPVoipIpConfRowStatus 1.3.6.1.4.1.3902.1082.500.21.2.2.13.1.50
The status of this conceptual row. The supported actions of this conceptual row only include: To create a row in this table, a manager must set this object to createAndGo(4). To delete a row in this table, a manager must set this object to destroy(6). To query this object, always return 1.
OBJECT-TYPE    
  RowStatus  

zxAnGponOPUniDhcpIpRetrieveTable 1.3.6.1.4.1.3902.1082.500.21.2.2.14
The ONU profile Ethernet UNI's DHCP controlling configuration table.
OBJECT-TYPE    
  SEQUENCE OF  
    ZxAnGponOPUniDhcpIpRetrieveEntry

zxAnGponOPUniDhcpIpRetrieveEntry 1.3.6.1.4.1.3902.1082.500.21.2.2.14.1
The ONU profile Ethernet UNI's DHCP controlling configuration entry.
OBJECT-TYPE    
  ZxAnGponOPUniDhcpIpRetrieveEntry  

zxAnGponOPUniDhcpIpRetrieveMode 1.3.6.1.4.1.3902.1082.500.21.2.2.14.1.1
This attribute indicates the Ethernet UNI how to obtain its IP address (from ONU or network), when ONU enables the DHCP server function.
OBJECT-TYPE    
  INTEGER noSpecify(1), fromOnu(2), fromNetwork(3), forbidden(4)  

zxAnGponOPIpStaticRouteTable 1.3.6.1.4.1.3902.1082.500.21.2.2.15
This table contains information of ONU IP static routes configuration. This managed entity stores IP static routes.
OBJECT-TYPE    
  SEQUENCE OF  
    ZxAnGponOPIpStaticRouteEntry

zxAnGponOPIpStaticRouteEntry 1.3.6.1.4.1.3902.1082.500.21.2.2.15.1
It is entry in the zxAnGponOPIpStaticRouteTable. The index 'zxAnGponOPName' represents the normal ONU index.
OBJECT-TYPE    
  ZxAnGponOPIpStaticRouteEntry  

zxAnGponOPIpRouteDestType 1.3.6.1.4.1.3902.1082.500.21.2.2.15.1.1
The type of the 'zxAnGponOPIpRouteDest' address, as defined in the InetAddress MIB. Only those address types that may appear in an actual routing table are allowed as values of this object.
OBJECT-TYPE    
  InetAddressType  

zxAnGponOPIpRouteDest 1.3.6.1.4.1.3902.1082.500.21.2.2.15.1.2
The destination IP address of this route. The type of this address is determined by the value of the 'zxAnGponOPIpRouteDestType' object. The values for the index objects 'zxAnGponOPIpRouteDest' and 'zxAnGponOPIpRoutePfxLen' must be consistent. When the value of 'zxAnGponOPIpRouteDest' (excluding the zone index, if one is present) is x, then the bitwise logical-AND of x with the value of the mask formed from the corresponding index object 'zxAnGponOPIpRoutePfxLen' must be equal to x. If not, then the index pair is not consistent and an inconsistentName error must be returned on SET or CREATE requests. This field may be set to the default route address 0.0.0.0 .
OBJECT-TYPE    
  InetAddress  

zxAnGponOPIpRoutePfxLen 1.3.6.1.4.1.3902.1082.500.21.2.2.15.1.3
Indicates the number of leading one bits that form the mask to be logical-ANDed with the destination address before being compared to the value in the zxAnGponOPIpRouteDest field. The values for the index objects 'zxAnGponOPIpRouteDest' and 'zxAnGponOPIpRoutePfxLen' must be consistent. When the value of 'zxAnGponOPIpRouteDest' (excluding the zone index, if one is present) is x, then the bitwise logical-AND of x with the value of the mask formed from the corresponding index object 'zxAnGponOPIpRoutePfxLen' must be equal to x. If not, then the index pair is not consistent and an inconsistentName error must be returned on SET or CREATE requests.
OBJECT-TYPE    
  InetAddressPrefixLength  

zxAnGponOPIpRouteNextHopType 1.3.6.1.4.1.3902.1082.500.21.2.2.15.1.4
The type of the 'zxAnGponOPIpRouteNextHopType' address, as defined in the InetAddress MIB. Value should be set to unknown(0) for non-remote routes. Only those address types that may appear in an actual routing table are allowed as values of this object.
OBJECT-TYPE    
  InetAddressType  

zxAnGponOPIpRouteNextHop 1.3.6.1.4.1.3902.1082.500.21.2.2.15.1.5
On remote routes, the address of the next system route. For non-remote routes, a zero length string. The type of this address is determined by the value of the 'zxAnGponOPIpRouteNextHopType' object. This field is not used when the next hop is reached through an unnumbered link. For IPv4, the value is '255.255.255.255' when not used.
OBJECT-TYPE    
  InetAddress  

zxAnGponOPIpRouteOutPort 1.3.6.1.4.1.3902.1082.500.21.2.2.15.1.6
The number of the IP port through which the next hop should be reached. This field is used when the next hop is reached through an unnumbered link and when a static route is set to support a fully meshed network. The value 0xFF indicates not used.
OBJECT-TYPE    
  Integer32 1..255  

zxAnGponOPIpRouteRowStatus 1.3.6.1.4.1.3902.1082.500.21.2.2.15.1.50
The status of this conceptual row. To create a row in this table, a manager must set this object to createAndGo(4). In particular, a newly created row cannot be created until the corresponding attributes from 'zxAnGponOPIpRouteNextHopType' to 'zxAnGponOPIpRouteOutPort' have been set. To delete a row in this table, a manager must set this object to destroy(6).
OBJECT-TYPE    
  RowStatus  

zxAnGponOPVeipTable 1.3.6.1.4.1.3902.1082.500.21.2.2.16
zxAnGponOPVeipTable table. This managed entity represents the data plane hand-off point in an ONU to a separate (non-OMCI) management domain. The virtual Ethernet interface point is managed by OMCI, and is potentially known to the non-OMCI management domain. One or more Ethernet traffic flows are present at this boundary.
OBJECT-TYPE    
  SEQUENCE OF  
    ZxAnGponOPVeipEntry

zxAnGponOPVeipEntry 1.3.6.1.4.1.3902.1082.500.21.2.2.16.1
GPON VEIP configuration entry. The index 'zxAnGponOPName' represents the normal ONU index or the virtual ONU index for profile.
OBJECT-TYPE    
  ZxAnGponOPVeipEntry  

zxAnGponOPVeipIndex 1.3.6.1.4.1.3902.1082.500.21.2.2.16.1.1
This attribute uniquely identifies each instance of this managed entity. To facilitate easy discovery, the ONU should assign IDs in the sequence 1, 2, .... The values 0 and 0xFFFF are reserved and not used now.
OBJECT-TYPE    
  Integer32 1..255  

zxAnGponOPVeipAdminState 1.3.6.1.4.1.3902.1082.500.21.2.2.16.1.2
This attribute locks and unlocks the functions performed by this managed entity.
OBJECT-TYPE    
  INTEGER unlocked(1), locked(2)  

zxAnGponOPVeipInterdomainName 1.3.6.1.4.1.3902.1082.500.21.2.2.16.1.3
This attribute is a character string that provides an optional way to identify the virtual Ethernet interface point to a non-OMCI management domain. The interface may also be identified by its managed entity ID, IANA assigned port and possibly other ways. If the vendor offers no information in this attribute, it should be set to a sequence of null bytes.
OBJECT-TYPE    
  DisplayString Size(0..25)  

zxAnGponOPVeipIsPortAssigned 1.3.6.1.4.1.3902.1082.500.21.2.2.16.1.4
This attribute points to an instance of the TCP/UDP config data managed entity, which provides for OMCI management of the non-OMCI management domain's IP connectivity. This attribute specifies whether to assign tcp or udp port for IP connectivity.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

zxAnGponOPVeipProtoType 1.3.6.1.4.1.3902.1082.500.21.2.2.16.1.5
This attribute points to an instance of the TCP/UDP config data managed entity, which provides for OMCI management of the non-OMCI management domain's IP connectivity. This attribute specifies the protocol used in IP connectivity.
OBJECT-TYPE    
  INTEGER tcp(1), udp(2)  

zxAnGponOPVeipAssignedPort 1.3.6.1.4.1.3902.1082.500.21.2.2.16.1.6
This attribute points to an instance of the TCP/UDP config data managed entity, which provides for OMCI management of the non-OMCI management domain's IP connectivity. This attribute specifies the assigned tcp or udp port for IP connectivity when zxAnGponOPVeipIsTcpOrUdpPortAssigned is true.
OBJECT-TYPE    
  Integer32 0..65535  

zxAnGponOPVeipHostId 1.3.6.1.4.1.3902.1082.500.21.2.2.16.1.7
This attribute points to an instance of the TCP/UDP config data managed entity, which provides for OMCI management of the non-OMCI management domain's IP connectivity when zxAnGponOPVeipIsTcpOrUdpPortAssigned is true. This attribute specifies the host ID for IP connectivity.
OBJECT-TYPE    
  Integer32 1..255  

zxAnGponOPTr069AcsTable 1.3.6.1.4.1.3902.1082.500.21.2.2.17
zxAnGponOPTr069AcsTable table. If functions within the ONU are managed by [BBF TR-69], this ME allows OMCI configuration of the ACS URL and related authentication information for an ACS connection initiated by the ONU. TR-69 supports other means to discover its ACS, so not all TR-69-compatible ONUs necessarily support this ME. Further, even if the ONU does support this ME, some operators may choose not to use it.
OBJECT-TYPE    
  SEQUENCE OF  
    ZxAnGponOPTr069AcsEntry

zxAnGponOPTr069AcsEntry 1.3.6.1.4.1.3902.1082.500.21.2.2.17.1
GPON Tr069 management server configuration entry. The index 'zxAnGponOPName' represents the normal ONU index or the virtual ONU index for profile.
OBJECT-TYPE    
  ZxAnGponOPTr069AcsEntry  

zxAnGponOPTr069AcsAdminState 1.3.6.1.4.1.3902.1082.500.21.2.2.17.1.1
This attribute locks and unlocks the functions performed by this managed entity. When the administrative state is locked, the functions of this ME are disabled. TR-69 connectivity to an ACS may be possible through means that do not depend on this ME. The default value of this attribute is locked.
OBJECT-TYPE    
  INTEGER unlocked(1), locked(2)  

zxAnGponOPTr069AcsUri 1.3.6.1.4.1.3902.1082.500.21.2.2.17.1.2
This attribute points to the large string ME that contains the network address. It may contain a fully qualified domain name, URI or IP address. The URI may also contain a port identifier, eg x.y.z.com:5060. A null pointer indicates that no network address is defined.
OBJECT-TYPE    
  DisplayString Size(0..128)  

zxAnGponOPTr069AcsValidation 1.3.6.1.4.1.3902.1082.500.21.2.2.17.1.3
This attribute specifies the validation scheme used when the ONU validates a challenge. Validation schemes are defined as follows: 1 Validation disabled. 2 Validate using MD5 digest authentication as defined in [IETF RFC 2069]. 3 Validate using basic authentication as defined in [IETF RFC 2617].
OBJECT-TYPE    
  INTEGER disabled(1), md5(2), basic(3)  

zxAnGponOPTr069AcsUsername 1.3.6.1.4.1.3902.1082.500.21.2.2.17.1.4
This string attribute is the user name. If the string is shorter than 25 bytes, it must be null terminated.
OBJECT-TYPE    
  DisplayString Size(0..5)  

zxAnGponOPTr069AcsPassword 1.3.6.1.4.1.3902.1082.500.21.2.2.17.1.5
This string attribute is the password. If the string is shorter than 25 bytes, it must be null terminated.
OBJECT-TYPE    
  DisplayString Size(0..25)  

zxAnGponOPTr069AcsRealm 1.3.6.1.4.1.3902.1082.500.21.2.2.17.1.6
This string attribute specifies the realm used in md5 digest authentication. If the string is shorter than 25 bytes, it must be null terminated.
OBJECT-TYPE    
  DisplayString Size(0..25)  

zxAnGponOPTr069AssociatedTag 1.3.6.1.4.1.3902.1082.500.21.2.2.17.1.7
This attribute is a TCI value for TR-69 management traffic passing through the virtual ethernet interface point. A TCI, comprising user priority, CFI and VID, is represented by 2 bytes. the first 3 bits represent priority. the last 12 bits represent VID. eg: priority(3 bits)| reserved(1 bits) |VID(12bits). The value 0xFFFF specifies that TR-69 management traffic passes through the virtual ethernet interface point with neither a VLAN nor a priority tag.
OBJECT-TYPE    
  Integer32 0..65535  

zxAnGponOPEthUniTable 1.3.6.1.4.1.3902.1082.500.21.2.2.18
The ONU profile Ethernet UNI configuration table.
OBJECT-TYPE    
  SEQUENCE OF  
    ZxAnGponOPEthUniEntry

zxAnGponOPEthUniEntry 1.3.6.1.4.1.3902.1082.500.21.2.2.18.1
The ONU profile Ethernet UNI configuration entry.
OBJECT-TYPE    
  ZxAnGponOPEthUniEntry  

zxAnGponOPEthUniExpectedType 1.3.6.1.4.1.3902.1082.500.21.2.2.18.1.1
The following coding is used for this attribute: 0x00 = by autosensing, 0x01 to 0xFE (1 to 254) = one of the values from table 3 that is compatible with the type of the LIM. Upon autonomous instantiation, the value 0x00 is used.
OBJECT-TYPE    
  Integer32 0..255  

zxAnGponOPEthUniIfSpeedConf 1.3.6.1.4.1.3902.1082.500.21.2.2.18.1.2
For 10/100 Base-Tx Ethernet interfaces, this attribute is used to set the configuration options: auto(1): Auto-sensing; half10(2): 10BaseT (half duplex); full10(3): 10BaseT (full duplex); half100(4): 100BaseT (half duplex); full100(5): 100BaseT (full duplex); full1000(6): Gigabit Ethernet (full duplex); full10000(7): 10G Ethernet (full duplex);
OBJECT-TYPE    
  INTEGER auto(1), half10(2), full10(3), half100(4), full100(5), full1000(6), full10000(7)  

zxAnGponOPEthUniLoopbackConf 1.3.6.1.4.1.3902.1082.500.21.2.2.18.1.3
This attribute is used to set the Ethernet loopback configuration: No loopback (value 0x01), loop3 (value 0x04, Loopback of downstream traffic after PHY transceiver).
OBJECT-TYPE    
  INTEGER noLoop(1), loop3(4)  

zxAnGponOPEthUniAdminState 1.3.6.1.4.1.3902.1082.500.21.2.2.18.1.4
This attribute is used to activate (unlock: value 0x01) and deactivate(lock: value 0x02) the functions performed by instances of this managed entity.
OBJECT-TYPE    
  INTEGER unlocked(1), locked(2)  

zxAnGponOPEthUniMaxFrameSize 1.3.6.1.4.1.3902.1082.500.21.2.2.18.1.5
This attribute denotes the maximum allowed frame size to be transmitted across this interface.
OBJECT-TYPE    
  Integer32 64..12288  

zxAnGponOPEthUniDteOrDceInd 1.3.6.1.4.1.3902.1082.500.21.2.2.18.1.6
This attribute specifies the Ethernet interface wiring: 1 DCE or MDI-X (default). 2 DTE or MDI. 3 Automatic selection
OBJECT-TYPE    
  INTEGER dce(1), dte(2), auto(3)  

zxAnGponOPEthUniPauseTime 1.3.6.1.4.1.3902.1082.500.21.2.2.18.1.7
This attribute allows the ONU line card to request that the customer terminal temporarily suspend sending data. Units are in pause quanta(1 pause_quantum equals 512 bits times of the particular implementation).
OBJECT-TYPE    
  Integer32 0..65535  

zxAnGponOPEthUniBridgeOrIpInd 1.3.6.1.4.1.3902.1082.500.21.2.2.18.1.8
This attribute specifies whether the Ethernet interface is bridged or derived from an IP router function. 1 Bridged 2 IP router 3 Depends on the parent circuit pack. 3 means that the circuit pack's bridged or IP ind attribute is either 1 or 2.
OBJECT-TYPE    
  INTEGER bridged(1), ipRouter(2), either(3)  

zxAnGponOPEthUniArcEnable 1.3.6.1.4.1.3902.1082.500.21.2.2.18.1.9
This attribute allows the activation of alarm reporting control (ARC) for this PPTP or cardholder. The attribute works in concert with the ARC interval attribute. enabled: enables ARC. disabled: disables ARC.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

zxAnGponOPEthUniArcInterval 1.3.6.1.4.1.3902.1082.500.21.2.2.18.1.10
This attribute defines the interval to be used with the ARC function for this PPTP or cardholder. The values 0 through 254 give the duration in minutes for the NALM-QI timer of M.3100. The special value 255 means that the timer never expires. The default value is zero.
OBJECT-TYPE    
  Integer32 0..255  

zxAnGponOPEthUniPppoeFilter 1.3.6.1.4.1.3902.1082.500.21.2.2.18.1.11
This attribute may be used to control filtering of PPPoE packets on this Ethernet port. The value 2 is used to disable filtering. The value 1 is used to enable filtering. When filtering is enabled, all packets other than PPPoE packets will be discarded.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

zxAnGponOPEthUniPowerFeed 1.3.6.1.4.1.3902.1082.500.21.2.2.18.1.12
This attribute controls whether power is provided to an external equipment over the Ethernet PPTP. Value 1 enables power over Ethernet port. The default value 2 disables power feed.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

zxAnGponOPEthUniLoopDetect 1.3.6.1.4.1.3902.1082.500.21.2.2.18.1.13
This attribute enable or disable the loopback detection.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

zxAnGponOnuPrfCompliances 1.3.6.1.4.1.3902.1082.500.21.4.1
OBJECT IDENTIFIER    

zxAnGponOnuPrfGroups 1.3.6.1.4.1.3902.1082.500.21.4.2
OBJECT IDENTIFIER    

zxAnGponOnuPrfCompliance 1.3.6.1.4.1.3902.1082.500.21.4.1.1
The compliance statement for entities which implements the ZTE-AN-GPON-ONUPRF-MIB.
MODULE-COMPLIANCE    

zxAnGponOnuPrfLineGroup 1.3.6.1.4.1.3902.1082.500.21.4.2.1
A collection of objects for ONU line profile group configuration.
OBJECT-GROUP    

zxAnGponOnuPrfServiceGroup 1.3.6.1.4.1.3902.1082.500.21.4.2.2
A collection of objects for ONU service profile group configuration.
OBJECT-GROUP