XYLAN-ATM-MIB

File: XYLAN-ATM-MIB.mib (175018 bytes)

Imported modules

RFC1155-SMI RFC-1212 RFC1213-MIB
XYLAN-BASE-MIB LAN-EMULATION-CLIENT-MIB BRIDGE-MIB

Imported symbols

Counter IpAddress OBJECT-TYPE
DisplayString xylanAtmArch lecIndex
MacAddress LecDataFrameSize

Defined Types

AtmAdminStatCodes  
INTEGER disable(1), enable(2), delete(3), create(4)    

AtmOperStatCodes  
INTEGER other(1), inService(2), outOfService(3), loopBack(4)    

AtmServiceOperStatCodes  
INTEGER disable(1), enabling(2), enabled(3), unknown(4)    

AtmConnectionOperStatCodes  
INTEGER unknown(1), end2EndUp(2), end2EndDown(3), localUpEnd2EndUnknown(4), localDown(5)    

AtmTransmissionTypes  
INTEGER unknown(1), sonetSTS3c(2), ds3(3), atm4b5b(4), atm8b10b(5), e3(6), sonetSTS12c(7)    

AtmMediaTypes  
INTEGER unknown(1), coaxCable(2), singleMode(3), multiMode(4), stp(5), utp(6)    

AtmTrafficDescrTypes  
INTEGER none(1), peakrate(2), noClpNoScr(3), clpNoTaggingNoScr(4), clpTaggingNoScr(5), noClpScr(6), clpNoTaggingScr(7), clpTaggingScr(8)    

XylanAtmLaneAddress  
DisplayString    

VpiInteger  
INTEGER    

VciInteger  
INTEGER    

LecState  
INTEGER initialState(1), lecsConnect(2), configure(3), join(4), initialRegistration(5), busConnect(6), operational(7)    

LecDataFrameFormat  
INTEGER unspecified(1), aflane8023(2), aflane8025(3)    

LeArpTableEntryType  
INTEGER other(1), learnedViaControl(2), learnedViaData(3), staticVolatile(4), staticNonVolatile(5)    

LeArpType  
INTEGER other(1), arpRdType(2), arpEsiType(3)    

AtmxPortEntry  
SEQUENCE    
  atmxPortSlotIndex INTEGER
  atmxPortPortIndex INTEGER
  atmxPortDescription DisplayString
  atmxPortConnectionType INTEGER
  atmxPortTransmissionType AtmTransmissionTypes
  atmxPortMediaType AtmMediaTypes
  atmxPortOperStatus AtmOperStatCodes
  atmxPortUniType INTEGER
  atmxPortMaxVCCs INTEGER
  atmxPortMaxVciBits INTEGER
  atmxPortTxSegmentSize INTEGER
  atmxPortRxSegmentSize INTEGER
  atmxPortTxBufferSize INTEGER
  atmxPortRxBufferSize INTEGER
  atmxPortUniPortIndex INTEGER
  atmxPortAddress DisplayString
  atmxPortSignalingVersion INTEGER
  atmxPortSignalingVci INTEGER
  atmxPortILMIVci INTEGER
  atmxPortEnableILMI INTEGER
  atmxPortPlScramble INTEGER
  atmxPortTimingMode INTEGER
  atmxPortProtocolType INTEGER
  atmxPortLoopbackConfig INTEGER
  atmxPortSSCOPstatus INTEGER
  atmxPortILMIstatus INTEGER

AtmxServiceEntry  
SEQUENCE    
  atmxServiceSlotIndex INTEGER
  atmxServicePortIndex INTEGER
  atmxServiceNumber INTEGER
  atmxServiceDescription DisplayString
  atmxServiceType INTEGER
  atmxServiceConnectionType INTEGER
  atmxServiceOperStatus AtmServiceOperStatCodes
  atmxServiceAdmStatus AtmAdminStatCodes
  atmxServiceEncapsType INTEGER
  atmxServiceArpRequestServer INTEGER
  atmxServiceConnections OCTET STRING
  atmxServiceAddress DisplayString
  atmxServiceAddresses OCTET STRING
  atmxServiceVlan OCTET STRING
  atmxServiceSEL INTEGER
  atmxServiceLaneCfgTblIdx INTEGER
  atmxServiceMulticastOutVcc INTEGER
  atmxServiceNumVclMembers INTEGER
  atmxServiceVclEncapType INTEGER
  atmxServiceSahiBwgNum INTEGER

AtmxLayerStatsEntry  
SEQUENCE    
  atmxLayerStatsSlotIndex INTEGER
  atmxLayerStatsPortIndex INTEGER
  atmxLayerStatsTxSDUs Counter
  atmxLayerStatsTxCells Counter
  atmxLayerStatsTxOctets Counter
  atmxLayerStatsRxSDUs Counter
  atmxLayerStatsRxCells Counter
  atmxLayerStatsRxOctets Counter
  atmxLayerStatsTxSDUDiscards Counter
  atmxLayerStatsTxSDUErrors Counter
  atmxLayerStatsTxSDUNoBuffers Counter
  atmxLayerStatsTxCellDiscards Counter
  atmxLayerStatsTxCellErrors Counter
  atmxLayerStatsTxCellNoBuffers Counter
  atmxLayerStatsRxSDUDiscards Counter
  atmxLayerStatsRxSDUErrors Counter
  atmxLayerStatsRxSDUInvalidSz Counter
  atmxLayerStatsRxSDUNoBuffers Counter
  atmxLayerStatsRxSDUTrash Counter
  atmxLayerStatsRxSDUCrcErrors Counter
  atmxLayerStatsRxCellDiscards Counter
  atmxLayerStatsRxCellErrors Counter
  atmxLayerStatsRxCellNoBuffers Counter
  atmxLayerStatsRxCellTrash Counter
  atmxLayerStatsRxCellCrcErrors Counter

AtmxVccStatsEntry  
SEQUENCE    
  atmxVccStatsSlotIndex INTEGER
  atmxVccStatsPortIndex INTEGER
  atmxVccStatsVci INTEGER
  atmxVccStatsTxSDUs Counter
  atmxVccStatsTxCells Counter
  atmxVccStatsTxOctets Counter
  atmxVccStatsRxSDUs Counter
  atmxVccStatsRxCells Counter
  atmxVccStatsRxOctets Counter
  atmxVccStatsTxSDUDiscards Counter
  atmxVccStatsTxSDUErrors Counter
  atmxVccStatsTxSDUNoBuffers Counter
  atmxVccStatsTxCellDiscards Counter
  atmxVccStatsTxCellErrors Counter
  atmxVccStatsTxCellNoBuffers Counter
  atmxVccStatsRxSDUDiscards Counter
  atmxVccStatsRxSDUErrors Counter
  atmxVccStatsRxSDUInvalidSz Counter
  atmxVccStatsRxSDUNoBuffers Counter
  atmxVccStatsRxSDUTrash Counter
  atmxVccStatsRxSDUCrcErrors Counter
  atmxVccStatsRxCellDiscards Counter
  atmxVccStatsRxCellErrors Counter
  atmxVccStatsRxCellNoBuffers Counter
  atmxVccStatsRxCellTrash Counter
  atmxVccStatsRxCellCrcErrors Counter

AtmxVccEntry  
SEQUENCE    
  atmxVccSlotIndex INTEGER
  atmxVccPortIndex INTEGER
  atmxVccVpi INTEGER
  atmxVccVci INTEGER
  atmxVccDescription DisplayString
  atmxVccConnType INTEGER
  atmxVccCircuitType INTEGER
  atmxVccOperStatus AtmConnectionOperStatCodes
  atmxVccUpTime DisplayString
  atmxVccDownTime DisplayString
  atmxVccTransmitMaxFrameSize INTEGER
  atmxVccReceiveMaxFrameSize INTEGER
  atmxVccRequestedTransmitTrafficDescriptor AtmTrafficDescrTypes
  atmxVccRequestedTransmitTrafficDescriptorParam1 INTEGER
  atmxVccRequestedTransmitTrafficDescriptorParam2 INTEGER
  atmxVccRequestedTransmitTrafficDescriptorParam3 INTEGER
  atmxVccRequestedTransmitTrafficQoSClass INTEGER
  atmxVccRequestedTransmitTrafficBestEffort INTEGER
  atmxVccRequestedReceiveTrafficDescriptor AtmTrafficDescrTypes
  atmxVccRequestedReceiveTrafficDescriptorParam1 INTEGER
  atmxVccRequestedReceiveTrafficDescriptorParam2 INTEGER
  atmxVccRequestedReceiveTrafficDescriptorParam3 INTEGER
  atmxVccRequestedReceiveTrafficQoSClass INTEGER
  atmxVccRequestedReceiveTrafficBestEffort INTEGER
  atmxVccAcceptableTransmitTrafficDescriptor AtmTrafficDescrTypes
  atmxVccAcceptableTransmitTrafficDescriptorParam1 INTEGER
  atmxVccAcceptableTransmitTrafficDescriptorParam2 INTEGER
  atmxVccAcceptableTransmitTrafficDescriptorParam3 INTEGER
  atmxVccAcceptableTransmitTrafficQoSClass INTEGER
  atmxVccAcceptableTransmitTrafficBestEffort INTEGER
  atmxVccAcceptableReceiveTrafficDescriptor AtmTrafficDescrTypes
  atmxVccAcceptableReceiveTrafficDescriptorParam1 INTEGER
  atmxVccAcceptableReceiveTrafficDescriptorParam2 INTEGER
  atmxVccAcceptableReceiveTrafficDescriptorParam3 INTEGER
  atmxVccAcceptableReceiveTrafficQoSClass INTEGER
  atmxVccAcceptableReceiveTrafficBestEffort INTEGER
  atmxVccActualTransmitTrafficDescriptor AtmTrafficDescrTypes
  atmxVccActualTransmitTrafficDescriptorParam1 INTEGER
  atmxVccActualTransmitTrafficDescriptorParam2 INTEGER
  atmxVccActualTransmitTrafficDescriptorParam3 INTEGER
  atmxVccActualTransmitTrafficQoSClass INTEGER
  atmxVccActualTransmitTrafficBestEffort INTEGER
  atmxVccActualReceiveTrafficDescriptor AtmTrafficDescrTypes
  atmxVccActualReceiveTrafficDescriptorParam1 INTEGER
  atmxVccActualReceiveTrafficDescriptorParam2 INTEGER
  atmxVccActualReceiveTrafficDescriptorParam3 INTEGER
  atmxVccActualReceiveTrafficQoSClass INTEGER
  atmxVccActualReceiveTrafficBestEffort INTEGER
  atmxVccAdmStatus AtmAdminStatCodes
  atmxVccServiceUsed INTEGER
  atmxVccConnectionUsed INTEGER

AtmxAddressEntry  
SEQUENCE    
  atmxAddressIndex INTEGER
  atmxAddressAtmAddress DisplayString
  atmxAddressType INTEGER
  atmxAddressVpi INTEGER
  atmxAddressVci INTEGER
  atmxAddressDescription DisplayString
  atmxAddressTransmitMaxSDU INTEGER
  atmxAddressReceiveMaxSDU INTEGER
  atmxAddressRequestedTransmitTrafficDescriptor AtmTrafficDescrTypes
  atmxAddressRequestedTransmitTrafficDescriptorParam1 INTEGER
  atmxAddressRequestedTransmitTrafficDescriptorParam2 INTEGER
  atmxAddressRequestedTransmitTrafficDescriptorParam3 INTEGER
  atmxAddressRequestedTransmitTrafficQoSClass INTEGER
  atmxAddressRequestedTransmitTrafficBestEffort INTEGER
  atmxAddressRequestedReceiveTrafficDescriptor AtmTrafficDescrTypes
  atmxAddressRequestedReceiveTrafficDescriptorParam1 INTEGER
  atmxAddressRequestedReceiveTrafficDescriptorParam2 INTEGER
  atmxAddressRequestedReceiveTrafficDescriptorParam3 INTEGER
  atmxAddressRequestedReceiveTrafficQoSClass INTEGER
  atmxAddressRequestedReceiveTrafficBestEffort INTEGER
  atmxAddressAcceptableTransmitTrafficDescriptor AtmTrafficDescrTypes
  atmxAddressAcceptableTransmitTrafficDescriptorParam1 INTEGER
  atmxAddressAcceptableTransmitTrafficDescriptorParam2 INTEGER
  atmxAddressAcceptableTransmitTrafficDescriptorParam3 INTEGER
  atmxAddressAcceptableTransmitTrafficQoSClass INTEGER
  atmxAddressAcceptableTransmitTrafficBestEffort INTEGER
  atmxAddressAcceptableReceiveTrafficDescriptor AtmTrafficDescrTypes
  atmxAddressAcceptableReceiveTrafficDescriptorParam1 INTEGER
  atmxAddressAcceptableReceiveTrafficDescriptorParam2 INTEGER
  atmxAddressAcceptableReceiveTrafficDescriptorParam3 INTEGER
  atmxAddressAcceptableReceiveTrafficQoSClass INTEGER
  atmxAddressAcceptableReceiveTrafficBestEffort INTEGER
  atmxAddressAdmStatus AtmAdminStatCodes
  atmxAddressServiceUsed INTEGER
  atmxAddressAddrUsed INTEGER

AtmxArpEntry  
SEQUENCE    
  atmxArpIndex INTEGER
  atmxArpIPAddress IpAddress
  atmxArpAtmAddress DisplayString
  atmxArpVci INTEGER
  atmxArpTimeToLive INTEGER
  atmxArpType INTEGER

AtmLecConfigEntry  
SEQUENCE    
  atmxLecConfigIndex INTEGER
  atmLecConfigLecsAtmAddress XylanAtmLaneAddress
  atmLecConfigUseDefaultLecsAddr INTEGER
  atmLecRowStatus INTEGER
  atmLecRowInUse INTEGER
  atmLecConfigMode INTEGER
  atmLecConfigLanType LecDataFrameFormat
  atmLecConfigMaxDataFrameSize LecDataFrameSize
  atmLecConfigLanName DisplayString
  atmLecConfigLesAtmAddress XylanAtmLaneAddress
  atmLecControlTimeout INTEGER
  atmLecMaxUnknownFrameCount INTEGER
  atmLecMaxUnknownFrameTime INTEGER
  atmLecVccTimeoutPeriod INTEGER
  atmLecMaxRetryCount INTEGER
  atmLecAgingTime INTEGER
  atmLecForwardDelayTime INTEGER
  atmLecExpectedArpResponseTime INTEGER
  atmLecFlushTimeOut INTEGER
  atmLecPathSwitchingDelay INTEGER
  atmLecUseForwardDelay INTEGER
  atmLecUseTranslation INTEGER
  atmLecSrBridgeNum INTEGER
  atmLecSrRingNum INTEGER

AtmLecStatusEntry  
SEQUENCE    
  atmxLecStatusSlotIndex INTEGER
  atmxLecStatusPortIndex INTEGER
  atmxLecStatusServiceNum INTEGER
  atmLecPrimaryAtmAddress XylanAtmLaneAddress
  atmLecID INTEGER
  atmLecInterfaceState LecState
  atmLecLastFailureRespCode INTEGER
  atmLecLastFailureState LecState
  atmLecProtocol INTEGER
  atmLecVersion INTEGER
  atmLecTopologyChange INTEGER
  atmLecConfigServerAtmAddress XylanAtmLaneAddress
  atmLecConfigSource INTEGER
  atmLecActualLanType LecDataFrameFormat
  atmLecActualMaxDataFrameSize LecDataFrameSize
  atmLecActualLanName DisplayString
  atmLecActualLesAtmAddress XylanAtmLaneAddress
  atmLecProxyClient INTEGER

AtmLecStatisticsEntry  
SEQUENCE    
  atmxLecStatsSlotIndex INTEGER
  atmxLecStatsPortIndex INTEGER
  atmxLecStatsServiceNum INTEGER
  atmLecArpRequestsOut Counter
  atmLecArpRequestsIn Counter
  atmLecArpRepliesOut Counter
  atmLecArpRepliesIn Counter
  atmLecControlFramesOut Counter
  atmLecControlFramesIn Counter
  atmLecSvcFailures Counter

AtmLecServerVccEntry  
SEQUENCE    
  atmxLecSlotIndex INTEGER
  atmxLecPortIndex INTEGER
  atmxLecServiceNum INTEGER
  atmLecConfigDirectVpi VpiInteger
  atmLecConfigDirectVci VciInteger
  atmLecControlDirectVpi VpiInteger
  atmLecControlDirectVci VciInteger
  atmLecControlDistributeVpi VpiInteger
  atmLecControlDistributeVci VciInteger
  atmLecMulticastSendVpi VpiInteger
  atmLecMulticastSendVci VciInteger
  atmLecMulticastForwardVpi VpiInteger
  atmLecMulticastForwardVci VciInteger

AtmLeArpEntry  
SEQUENCE    
  atmxLeArpSlotIndex INTEGER
  atmxLeArpPortIndex INTEGER
  atmxLeArpServiceNum INTEGER
  atmLeArpIndex INTEGER
  atmLeArpMacAddress MacAddress
  atmLeArpAtmAddress XylanAtmLaneAddress
  atmLeArpIsRemoteAddress INTEGER
  atmLeArpEntryType LeArpTableEntryType
  atmLeArpVpi VpiInteger
  atmLeArpVci VciInteger
  atmLeArpAge INTEGER
  atmLeArpType LeArpType

XylanLecConfigEntry  
SEQUENCE    
  xylanLecSlotNumber INTEGER
  xylanLecPortNumber INTEGER
  xylanLecServiceNumber INTEGER
  xylanLecGroupNumber INTEGER

AtmCIPStatisticsEntry  
SEQUENCE    
  atmxCIPSlotIndex INTEGER
  atmxCIPPortIndex INTEGER
  atmxCIPServiceNum INTEGER
  atmCIPpktsFromIP Counter
  atmCIPBroadcastPktFromIP Counter
  atmCIPPktsFromIPDiscard Counter
  atmCIPPktsToIP Counter
  atmCIPPktsFromNet Counter
  atmCIPPktsFromNetDiscard Counter
  atmCIPArpRespFromNet Counter
  atmCIPArpReqFromNet Counter
  atmCIPInvArpRespFromNet Counter
  atmCIPInvArpReqFromNet Counter
  atmCIPInvArpNakFromNet Counter
  atmCIPPktsToNet Counter
  atmCIPPktsToNetDiscard Counter
  atmCIPArpRespToNet Counter
  atmCIPArpReqToNet Counter
  atmCIPInvArpRespToNet Counter
  atmCIPInvArpReqToNet Counter
  atmCIPInvArpNakToNet Counter

AtmGpToVcMappingEntry  
SEQUENCE    
  atmxGpToVcSlotIndex INTEGER
  atmxGpToVcPortIndex INTEGER
  atmxGpToVcServiceNum INTEGER
  atmxGpToVcGroupId INTEGER
  atmxGpToVcVpi INTEGER
  atmxGpToVcVci INTEGER
  atmxGpToVcRowStatus INTEGER

AtmGpToVcBulkMappingEntry  
SEQUENCE    
  atmxGpToVcBulkSlotIndex INTEGER
  atmxGpToVcBulkPortIndex INTEGER
  atmxGpToVcBulkServiceNum INTEGER
  atmxGpToVcBulkNumOfNodes INTEGER
  atmxGpToVcBulkMappingList OCTET STRING Size(8..8000)

AtmxBwgEntry  
SEQUENCE    
  atmxBwgSlotIndex INTEGER
  atmxBwgPortIndex INTEGER
  atmxBwgNum INTEGER
  atmxBwgBE INTEGER
  atmxBwgPcr INTEGER
  atmxBwgScr INTEGER
  atmxBwgMbs INTEGER
  atmxBwgOperStatus AtmOperStatCodes

AtmxBwgServiceEntry  
SEQUENCE    
  atmxBwgServiceNum INTEGER

Defined Values

atmxPortGroup 2.1.800.2.4.1
OBJECT IDENTIFIER    

atmxServiceGroup 2.1.800.2.4.2
OBJECT IDENTIFIER    

atmxLayerStatsGroup 2.1.800.2.4.3
OBJECT IDENTIFIER    

atmxVccStatsGroup 2.1.800.2.4.4
OBJECT IDENTIFIER    

atmxVccGroup 2.1.800.2.4.5
OBJECT IDENTIFIER    

atmxAddressGroup 2.1.800.2.4.6
OBJECT IDENTIFIER    

atmxArpGroup 2.1.800.2.4.7
OBJECT IDENTIFIER    

atmxLaneGroup 2.1.800.2.4.8
OBJECT IDENTIFIER    

atmxCIPstatsGroup 2.1.800.2.4.9
OBJECT IDENTIFIER    

atmxSahiBWGroup 2.1.800.2.4.11
OBJECT IDENTIFIER    

atmxLsmGroup 2.1.800.2.4.13
OBJECT IDENTIFIER    

atmx1483ScaleGroup 2.1.800.2.4.12
OBJECT IDENTIFIER    

atmxPortTable 2.1.800.2.4.1.1
A table of port layer status and parameter information for the UNI's physical interface.
OBJECT-TYPE    
  SEQUENCE OF  
    AtmxPortEntry

atmxPortEntry 2.1.800.2.4.1.1.1
An entry in the table, containing information about the physical layer of a UNI interface.
OBJECT-TYPE    
  AtmxPortEntry  

atmxPortSlotIndex 2.1.800.2.4.1.1.1.1
A unique value which identifies this hsm board slot.
OBJECT-TYPE    
  INTEGER 1..9  

atmxPortPortIndex 2.1.800.2.4.1.1.1.2
A unique value which identifies this atm submodule port.
OBJECT-TYPE    
  INTEGER 1..2  

atmxPortDescription 2.1.800.2.4.1.1.1.3
A description for this atm port.
OBJECT-TYPE    
  DisplayString Size(0..31)  

atmxPortConnectionType 2.1.800.2.4.1.1.1.4
The connection type of this board.
OBJECT-TYPE    
  INTEGER pvc(1), svc(2)  

atmxPortTransmissionType 2.1.800.2.4.1.1.1.5
The transmission type of this port. For example, for a port using the Sonet STS-3c physical layer at 155.52 Mbs, this object would have the Object Identifier value: atmxSonetSTS3c.
OBJECT-TYPE    
  AtmTransmissionTypes  

atmxPortMediaType 2.1.800.2.4.1.1.1.6
The type of media being used on this port. For example for a port using coaxial cable, the object would have the Object Identifier value: atmxMediaCoaxCable.
OBJECT-TYPE    
  AtmMediaTypes  

atmxPortOperStatus 2.1.800.2.4.1.1.1.7
The operational state (i.e., actual) of this port. The ILMI should not alarm on a physical interface for when the value of this object is outOfService(3). This capability is useful if the equipment is to be disconnected, or for troubleshooting purposes. A value of loopBack(4) indicates that a local loopback is in place.
OBJECT-TYPE    
  AtmOperStatCodes  

atmxPortUniType 2.1.800.2.4.1.1.1.8
The type of the ATM UNI, either public or private.
OBJECT-TYPE    
  INTEGER public(1), private(2)  

atmxPortMaxVCCs 2.1.800.2.4.1.1.1.9
The maximum number of VCCs supported on this UNI.
OBJECT-TYPE    
  INTEGER 0..1023  

atmxPortMaxVciBits 2.1.800.2.4.1.1.1.10
The number of active VCI bits on this interface.
OBJECT-TYPE    
  INTEGER 0..10  

atmxPortTxSegmentSize 2.1.800.2.4.1.1.1.11
The transmit segment size on this UNI. The nearest power of two less than or equal to this value will be used internally. The max memory is 512K, therefore the maximum number of channels will be 512K/internal tx seg size.
OBJECT-TYPE    
  INTEGER 2048..131072  

atmxPortRxSegmentSize 2.1.800.2.4.1.1.1.12
The receive segment size on this UNI. The nearest power of two less than or equal to this value will be used internally. The max memory is 512K, therefore the maximum number of channels will be 512K/internal rx seg size.
OBJECT-TYPE    
  INTEGER 2048..131072  

atmxPortTxBufferSize 2.1.800.2.4.1.1.1.13
The transmit buffer size on this UNI. The buffer size must be less than or equal to the segment size and should be greater than or equal to the maximum frame size.
OBJECT-TYPE    
  INTEGER 1800..131072  

atmxPortRxBufferSize 2.1.800.2.4.1.1.1.14
The receive buffer size on this UNI. The buffer size must be less than or equal to the segment size and should be greater than or equal to the maximum frame size.
OBJECT-TYPE    
  INTEGER 1800..131072  

atmxPortUniPortIndex 2.1.800.2.4.1.1.1.15
This object should not be implemented except as required for backward compatibility with version 2.0 of the UNI specification. This object provide a port index link to the UNI MIB
OBJECT-TYPE    
  INTEGER 0..2147483647  

atmxPortAddress 2.1.800.2.4.1.1.1.16
This object should not be implemented except as required for backward compatibility with version 2.0 of the UNI specification. The Address Group, as defined as part of the separate Address Registration MIB should be used instead.
OBJECT-TYPE    
  DisplayString Size(0..40)  

atmxPortSignalingVersion 2.1.800.2.4.1.1.1.17
Version of the ATM forum UNI Signaling.
OBJECT-TYPE    
  INTEGER ver30(1), ver31(2)  

atmxPortSignalingVci 2.1.800.2.4.1.1.1.18
Signaling Vci.
OBJECT-TYPE    
  INTEGER 0..1023  

atmxPortILMIVci 2.1.800.2.4.1.1.1.19
ILMI Vci.
OBJECT-TYPE    
  INTEGER 0..1023  

atmxPortEnableILMI 2.1.800.2.4.1.1.1.20
ILMI Enable.
OBJECT-TYPE    
  INTEGER false(1), true(2)  

atmxPortPlScramble 2.1.800.2.4.1.1.1.21
Payload Scrambling Enable.
OBJECT-TYPE    
  INTEGER false(1), true(2)  

atmxPortTimingMode 2.1.800.2.4.1.1.1.22
Timing mode to use. Use local timing or loop timing.
OBJECT-TYPE    
  INTEGER loop(1), local(2)  

atmxPortProtocolType 2.1.800.2.4.1.1.1.23
Physical layer protocol type.
OBJECT-TYPE    
  INTEGER sonet(1), sdh(2), notApplicable(3)  

atmxPortLoopbackConfig 2.1.800.2.4.1.1.1.24
Loopback config. for this physical layer. 1 = NoLoop, 2 = DiagLoop, 3 = LineLoop, 4 = CellLoop, 5 = PayloadLoop
OBJECT-TYPE    
  INTEGER 1..5  

atmxPortSSCOPstatus 2.1.800.2.4.1.1.1.25
SSCOP status of this physical layer.
OBJECT-TYPE    
  INTEGER up(1), down(2)  

atmxPortILMIstatus 2.1.800.2.4.1.1.1.26
ILMI status of this physical layer.
OBJECT-TYPE    
  INTEGER up(1), down(2)  

atmxServiceTable 2.1.800.2.4.2.1
A table of ATM services status and parameter information.
OBJECT-TYPE    
  SEQUENCE OF  
    AtmxServiceEntry

atmxServiceEntry 2.1.800.2.4.2.1.1
An entry in the table, containing information about the ATM services.
OBJECT-TYPE    
  AtmxServiceEntry  

atmxServiceSlotIndex 2.1.800.2.4.2.1.1.1
A unique value which identifies this hsm board slot.
OBJECT-TYPE    
  INTEGER 1..9  

atmxServicePortIndex 2.1.800.2.4.2.1.1.2
A unique value which identifies this atm submodule port.
OBJECT-TYPE    
  INTEGER 1..2  

atmxServiceNumber 2.1.800.2.4.2.1.1.3
The unique service number for this particular slot/port.
OBJECT-TYPE    
  INTEGER 1..256  

atmxServiceDescription 2.1.800.2.4.2.1.1.4
A description for this atm service.
OBJECT-TYPE    
  DisplayString Size(0..31)  

atmxServiceType 2.1.800.2.4.2.1.1.5
The service type. For 1483 Scaling Service, create it only with 1 group and 1 vc thru this atmxServiceGroup. Adding Other group-to-vc mapping should utilize the atmx1483ScaleGroup.
OBJECT-TYPE    
  INTEGER lanEmulation(1), scaling1483(2), trunking(4), classicalIP(5), ptopBridging(6), vlanCluster(7), laneServiceModule(8), mpoaClient(9)  

atmxServiceConnectionType 2.1.800.2.4.2.1.1.6
The connection type of this board.
OBJECT-TYPE    
  INTEGER pvc(1), svc(2)  

atmxServiceOperStatus 2.1.800.2.4.2.1.1.7
The service operational status.
OBJECT-TYPE    
  AtmServiceOperStatCodes  

atmxServiceAdmStatus 2.1.800.2.4.2.1.1.8
The service adminstration status.
OBJECT-TYPE    
  AtmAdminStatCodes  

atmxServiceEncapsType 2.1.800.2.4.2.1.1.9
The service encapsulation type. This object is applicable only to PTOP service.
OBJECT-TYPE    
  INTEGER private(1), rfc1483(2), none(3)  

atmxServiceArpRequestServer 2.1.800.2.4.2.1.1.10
The Arp request server. 0 = not applicable, 1 = Non arp server, 2 = arp server.
OBJECT-TYPE    
  INTEGER 0..2  

atmxServiceConnections 2.1.800.2.4.2.1.1.11
The connections for this service. Interpret this as a 16 bit field per connection: Trunking 1, PTOP Bridging 1, Classical IP 1..255. For Vlan cluster, this object is interpreted as a 32 bit field where each 32 bit represent the vci value of the Data Direct vcc and the Multicast In vcc. Each vcc take up 16 bits. There can be up to 32 pairs of Data Direct vcc and Mulitcast In vcc. For 1483 Scaling Service, create it only with 1 group and 1 vc thru this atmxServiceGroup. Adding Other group-to-vc mapping should utilize the atmx1483ScaleGroup.
OBJECT-TYPE    
  OCTET STRING Size(0..512)  

atmxServiceAddress 2.1.800.2.4.2.1.1.12
The unique service address.
OBJECT-TYPE    
  DisplayString Size(0..40)  

atmxServiceAddresses 2.1.800.2.4.2.1.1.13
The addresses for this service. Interpret this as a 16 bit field per address: Trunking 1, PTOP Bridging 1, Classical IP 1..255.
OBJECT-TYPE    
  OCTET STRING Size(0..512)  

atmxServiceVlan 2.1.800.2.4.2.1.1.14
The Vlans for this service. Interpret this as a 16 bit field per vlan: Trunking 1-32, PTOP Bridging 1, Classical IP 1. For Vlan Cluster, it will depend on the encapsulation type selected. If RFC 1483, only 1 vlan while Xylan ATM trunking up to 32 vlans are allowed. For 1483 Scaling Service, create it only with 1 group and 1 vc thru this atmxServiceGroup. Adding Other group-to-vc mapping should utilize the atmx1483ScaleGroup.
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

atmxServiceSEL 2.1.800.2.4.2.1.1.15
The SEL for the ATM address of this service.
OBJECT-TYPE    
  INTEGER 1..255  

atmxServiceLaneCfgTblIdx 2.1.800.2.4.2.1.1.16
Index to the LAN Emulation Configuration Table. This index is only used when the Service type is ATM LAN Emulation. For other service type this should be set to zero (0).
OBJECT-TYPE    
  INTEGER 0..255  

atmxServiceMulticastOutVcc 2.1.800.2.4.2.1.1.17
The Multicast Out VCC for this Vlan Cluster (X-LANE) service. This is only applicable to service type Vlan Cluster. For other ATM services, this object will return a zero (0). For Vlan Cluster service if a zero (0) is returned means no Multicast out is specified.
OBJECT-TYPE    
  INTEGER 1..1023  

atmxServiceNumVclMembers 2.1.800.2.4.2.1.1.18
The number of other Vlan cluster members defined and have a data direct VCC associated with the connection. This object is valid only for Vlan cluster services. Zero (0) will be returned for other ATM services.
OBJECT-TYPE    
  INTEGER 1..32  

atmxServiceVclEncapType 2.1.800.2.4.2.1.1.19
The Encapsulation type for the Vlan Cluster service. 1 = RFC 1483 encapsulation. 2 = Xylan ATM trunking. 3 = not applicable. This object is only valid for Vlan cluster services. All other ATM services will return a value of 3. If the encapsulation type is RFC 1483, only one (1) vlan as defined in atmxServiceVlan can be associated with this service. If encapsulation type is Xylan ATM trunking more than 1 vlan can be assocated with this service.
OBJECT-TYPE    
  INTEGER 1..3  

atmxServiceSahiBwgNum 2.1.800.2.4.2.1.1.20
The bwg num for sahi based hsm's. The user can set the pcr, scr, mbs using the bwg table and chose the desired bwg num for this service ensuring that this service obtains the desired bandwidth
OBJECT-TYPE    
  INTEGER 1..8  

atmxLayerStatsTable 2.1.800.2.4.3.1
A table of ATM layer statistics information.
OBJECT-TYPE    
  SEQUENCE OF  
    AtmxLayerStatsEntry

atmxLayerStatsEntry 2.1.800.2.4.3.1.1
An entry in the table, containing information about the ATM layer statistics.
OBJECT-TYPE    
  AtmxLayerStatsEntry  

atmxLayerStatsSlotIndex 2.1.800.2.4.3.1.1.1
A unique value which identifies this hsm board slot.
OBJECT-TYPE    
  INTEGER 1..9  

atmxLayerStatsPortIndex 2.1.800.2.4.3.1.1.2
A unique value which identifies this atm submodule port.
OBJECT-TYPE    
  INTEGER 1..2  

atmxLayerStatsTxSDUs 2.1.800.2.4.3.1.1.3
The total number of successfully transmitted SDU's on the physical port.
OBJECT-TYPE    
  Counter  

atmxLayerStatsTxCells 2.1.800.2.4.3.1.1.4
The total number of successfully transmitted cells.
OBJECT-TYPE    
  Counter  

atmxLayerStatsTxOctets 2.1.800.2.4.3.1.1.5
The total number of successfully transmitted octets.
OBJECT-TYPE    
  Counter  

atmxLayerStatsRxSDUs 2.1.800.2.4.3.1.1.6
The total number of successfully received SDU's.
OBJECT-TYPE    
  Counter  

atmxLayerStatsRxCells 2.1.800.2.4.3.1.1.7
The total number of successfully received cells.
OBJECT-TYPE    
  Counter  

atmxLayerStatsRxOctets 2.1.800.2.4.3.1.1.8
The total number of successfully received octets.
OBJECT-TYPE    
  Counter  

atmxLayerStatsTxSDUDiscards 2.1.800.2.4.3.1.1.9
The total number of transmit SDUs that are discarded.
OBJECT-TYPE    
  Counter  

atmxLayerStatsTxSDUErrors 2.1.800.2.4.3.1.1.10
The total number of transmit SDU with errors.
OBJECT-TYPE    
  Counter  

atmxLayerStatsTxSDUNoBuffers 2.1.800.2.4.3.1.1.11
The number of transmitted SDU's with no buffers available on the physical port.
OBJECT-TYPE    
  Counter  

atmxLayerStatsTxCellDiscards 2.1.800.2.4.3.1.1.12
The total number of transmit cells that are dicscarded.
OBJECT-TYPE    
  Counter  

atmxLayerStatsTxCellErrors 2.1.800.2.4.3.1.1.13
The total number of transmit cell with errors.
OBJECT-TYPE    
  Counter  

atmxLayerStatsTxCellNoBuffers 2.1.800.2.4.3.1.1.14
The total number of transmit cell with no buffers available.
OBJECT-TYPE    
  Counter  

atmxLayerStatsRxSDUDiscards 2.1.800.2.4.3.1.1.15
The total number of receive SDU's that are discarded.
OBJECT-TYPE    
  Counter  

atmxLayerStatsRxSDUErrors 2.1.800.2.4.3.1.1.16
The total number of receive SDU's with errors.
OBJECT-TYPE    
  Counter  

atmxLayerStatsRxSDUInvalidSz 2.1.800.2.4.3.1.1.17
The total number of receive SDU's with invalid size
OBJECT-TYPE    
  Counter  

atmxLayerStatsRxSDUNoBuffers 2.1.800.2.4.3.1.1.18
The total number of receive SDU's with no buffers
OBJECT-TYPE    
  Counter  

atmxLayerStatsRxSDUTrash 2.1.800.2.4.3.1.1.19
The total number of receive trash SDU's
OBJECT-TYPE    
  Counter  

atmxLayerStatsRxSDUCrcErrors 2.1.800.2.4.3.1.1.20
The total number of receive SDU's with crc errors
OBJECT-TYPE    
  Counter  

atmxLayerStatsRxCellDiscards 2.1.800.2.4.3.1.1.21
The total number of receive cells that are discarded.
OBJECT-TYPE    
  Counter  

atmxLayerStatsRxCellErrors 2.1.800.2.4.3.1.1.22
The total number of recieve cell with errors
OBJECT-TYPE    
  Counter  

atmxLayerStatsRxCellNoBuffers 2.1.800.2.4.3.1.1.23
The total number of receive cell with no buffers
OBJECT-TYPE    
  Counter  

atmxLayerStatsRxCellTrash 2.1.800.2.4.3.1.1.24
The total number of recieve trash cells.
OBJECT-TYPE    
  Counter  

atmxLayerStatsRxCellCrcErrors 2.1.800.2.4.3.1.1.25
The total number of receive cells with crc errors.
OBJECT-TYPE    
  Counter  

atmxVccStatsTable 2.1.800.2.4.4.1
A table of ATM virtual channel connection statistics information.
OBJECT-TYPE    
  SEQUENCE OF  
    AtmxVccStatsEntry

atmxVccStatsEntry 2.1.800.2.4.4.1.1
An entry in the table, containing information about the ATM virtual channel connection statistics.
OBJECT-TYPE    
  AtmxVccStatsEntry  

atmxVccStatsSlotIndex 2.1.800.2.4.4.1.1.1
A unique value which identifies this hsm board slot.
OBJECT-TYPE    
  INTEGER 1..9  

atmxVccStatsPortIndex 2.1.800.2.4.4.1.1.2
A unique value which identifies this atm submodule port.
OBJECT-TYPE    
  INTEGER 1..2  

atmxVccStatsVci 2.1.800.2.4.4.1.1.3
A unique value which identifies this atm port.
OBJECT-TYPE    
  INTEGER 1..1024  

atmxVccStatsTxSDUs 2.1.800.2.4.4.1.1.4
The total number of transmitted SDU's on this virtual channel.
OBJECT-TYPE    
  Counter  

atmxVccStatsTxCells 2.1.800.2.4.4.1.1.5
The total number of transmitted cells on this virtual channel.
OBJECT-TYPE    
  Counter  

atmxVccStatsTxOctets 2.1.800.2.4.4.1.1.6
The total number of transmitted octets on this virtual channel.
OBJECT-TYPE    
  Counter  

atmxVccStatsRxSDUs 2.1.800.2.4.4.1.1.7
The total number of received SDU's on this virtual channel.
OBJECT-TYPE    
  Counter  

atmxVccStatsRxCells 2.1.800.2.4.4.1.1.8
The total number of received cells on this virtual channel.
OBJECT-TYPE    
  Counter  

atmxVccStatsRxOctets 2.1.800.2.4.4.1.1.9
The total number of received octets on this virtual channel.
OBJECT-TYPE    
  Counter  

atmxVccStatsTxSDUDiscards 2.1.800.2.4.4.1.1.10
The total number of transmit SDU discards on this virtual channel.
OBJECT-TYPE    
  Counter  

atmxVccStatsTxSDUErrors 2.1.800.2.4.4.1.1.11
The total number of transmit SDU errors on this virtual channel.
OBJECT-TYPE    
  Counter  

atmxVccStatsTxSDUNoBuffers 2.1.800.2.4.4.1.1.12
The number of transmit SDU's with no buffers on this virtual channel.
OBJECT-TYPE    
  Counter  

atmxVccStatsTxCellDiscards 2.1.800.2.4.4.1.1.13
The total number of transmit cells that are dicscarded on this virtual channel.
OBJECT-TYPE    
  Counter  

atmxVccStatsTxCellErrors 2.1.800.2.4.4.1.1.14
The total number of transmit cell with errors on this virtual channel.
OBJECT-TYPE    
  Counter  

atmxVccStatsTxCellNoBuffers 2.1.800.2.4.4.1.1.15
The total number of transmit cell with no buffers on this virtual channel.
OBJECT-TYPE    
  Counter  

atmxVccStatsRxSDUDiscards 2.1.800.2.4.4.1.1.16
The total number of receive SDU's discarded on this virtual channel.
OBJECT-TYPE    
  Counter  

atmxVccStatsRxSDUErrors 2.1.800.2.4.4.1.1.17
The total number of receive SDU's with errors on this virtual channel.
OBJECT-TYPE    
  Counter  

atmxVccStatsRxSDUInvalidSz 2.1.800.2.4.4.1.1.18
The total number of received SDU's with invalid size on this virtual channel.
OBJECT-TYPE    
  Counter  

atmxVccStatsRxSDUNoBuffers 2.1.800.2.4.4.1.1.19
The total number of receive SDU's with no buffers on this virtual channel.
OBJECT-TYPE    
  Counter  

atmxVccStatsRxSDUTrash 2.1.800.2.4.4.1.1.20
The total number of receive trash SDU's on this virtual channel.
OBJECT-TYPE    
  Counter  

atmxVccStatsRxSDUCrcErrors 2.1.800.2.4.4.1.1.21
The total number of receive SDU's crc errors on this virtual channel.
OBJECT-TYPE    
  Counter  

atmxVccStatsRxCellDiscards 2.1.800.2.4.4.1.1.22
The total number of receive cells discarded on this virtual channel.
OBJECT-TYPE    
  Counter  

atmxVccStatsRxCellErrors 2.1.800.2.4.4.1.1.23
The total number of recieve cell with errors on this virtual channel.
OBJECT-TYPE    
  Counter  

atmxVccStatsRxCellNoBuffers 2.1.800.2.4.4.1.1.24
The total number of receive cells with no buffers on this virtual channel.
OBJECT-TYPE    
  Counter  

atmxVccStatsRxCellTrash 2.1.800.2.4.4.1.1.25
The total number of recieve trash cells on this virtual channel.
OBJECT-TYPE    
  Counter  

atmxVccStatsRxCellCrcErrors 2.1.800.2.4.4.1.1.26
The total number of receive cells with crc errors on this virtual channel.
OBJECT-TYPE    
  Counter  

atmxVccTable 2.1.800.2.4.5.1
A table of ATM virtual channel connections status and parameter information.
OBJECT-TYPE    
  SEQUENCE OF  
    AtmxVccEntry

atmxVccEntry 2.1.800.2.4.5.1.1
An entry in the table, containing information about the ATM virtual channel connections.
OBJECT-TYPE    
  AtmxVccEntry  

atmxVccSlotIndex 2.1.800.2.4.5.1.1.1
A unique value which identifies this hsm board slot.
OBJECT-TYPE    
  INTEGER 1..9  

atmxVccPortIndex 2.1.800.2.4.5.1.1.2
A unique value which identifies this atm submodule port.
OBJECT-TYPE    
  INTEGER 1..2  

atmxVccVpi 2.1.800.2.4.5.1.1.3
The virtual path identifier associated with this virtual connection.
OBJECT-TYPE    
  INTEGER 0..0  

atmxVccVci 2.1.800.2.4.5.1.1.4
The virtual channel identifier associated with the virtual connection.
OBJECT-TYPE    
  INTEGER 1..1023  

atmxVccDescription 2.1.800.2.4.5.1.1.5
A description for this virtual connection.
OBJECT-TYPE    
  DisplayString Size(0..31)  

atmxVccConnType 2.1.800.2.4.5.1.1.6
The virtual connection type.
OBJECT-TYPE    
  INTEGER vcc(1), vpc(2)  

atmxVccCircuitType 2.1.800.2.4.5.1.1.7
The virtual connection circuit type.
OBJECT-TYPE    
  INTEGER pvc(1), svc(2)  

atmxVccOperStatus 2.1.800.2.4.5.1.1.8
The actual operational status of the VCC A value of end2endUp(2) or end2endDown(3) would be used if end-to-end status is known. If only local status information is available, a value of localUpEnd2endUnknown(4) or localDown(5) would be used.
OBJECT-TYPE    
  AtmConnectionOperStatCodes  

atmxVccUpTime 2.1.800.2.4.5.1.1.9
The virtual channel connection up time for this connection.
OBJECT-TYPE    
  DisplayString Size(0..31)  

atmxVccDownTime 2.1.800.2.4.5.1.1.10
The virtual channel connection down time for this connection.
OBJECT-TYPE    
  DisplayString Size(0..31)  

atmxVccTransmitMaxFrameSize 2.1.800.2.4.5.1.1.11
The virtual channel connection maximum transmit frame size for this connection.
OBJECT-TYPE    
  INTEGER 0..353208  

atmxVccReceiveMaxFrameSize 2.1.800.2.4.5.1.1.12
The virtual channel connection maximum receive frame size for this connection.
OBJECT-TYPE    
  INTEGER 64..32678  

atmxVccRequestedTransmitTrafficDescriptor 2.1.800.2.4.5.1.1.13
The virtual channel connection traffic descriptor for this connection.
OBJECT-TYPE    
  AtmTrafficDescrTypes  

atmxVccRequestedTransmitTrafficDescriptorParam1 2.1.800.2.4.5.1.1.14
The virtual channel connection traffic parameter 1 for this connection.
OBJECT-TYPE    
  INTEGER 0..353208  

atmxVccRequestedTransmitTrafficDescriptorParam2 2.1.800.2.4.5.1.1.15
The virtual channel connection traffic parameter 2 for this connection.
OBJECT-TYPE    
  INTEGER 0..353208  

atmxVccRequestedTransmitTrafficDescriptorParam3 2.1.800.2.4.5.1.1.16
The virtual channel connection traffic parameter 3 for this connection.
OBJECT-TYPE    
  INTEGER 0..353208  

atmxVccRequestedTransmitTrafficQoSClass 2.1.800.2.4.5.1.1.17
The virtual channel connection QOS Class for this connection.
OBJECT-TYPE    
  INTEGER 0..4  

atmxVccRequestedTransmitTrafficBestEffort 2.1.800.2.4.5.1.1.18
The virtual channel connection best effort value for this connection.
OBJECT-TYPE    
  INTEGER false(1), true(2)  

atmxVccRequestedReceiveTrafficDescriptor 2.1.800.2.4.5.1.1.19
The virtual channel connection traffic descriptor for this connection.
OBJECT-TYPE    
  AtmTrafficDescrTypes  

atmxVccRequestedReceiveTrafficDescriptorParam1 2.1.800.2.4.5.1.1.20
The virtual channel connection traffic parameter 1 for this connection.
OBJECT-TYPE    
  INTEGER 0..353208  

atmxVccRequestedReceiveTrafficDescriptorParam2 2.1.800.2.4.5.1.1.21
The virtual channel connection traffic parameter 2 for this connection.
OBJECT-TYPE    
  INTEGER 0..353208  

atmxVccRequestedReceiveTrafficDescriptorParam3 2.1.800.2.4.5.1.1.22
The virtual channel connection traffic parameter 3 for this connection.
OBJECT-TYPE    
  INTEGER 0..353208  

atmxVccRequestedReceiveTrafficQoSClass 2.1.800.2.4.5.1.1.23
The virtual channel connection traffic QOS Class for this connection.
OBJECT-TYPE    
  INTEGER 0..4  

atmxVccRequestedReceiveTrafficBestEffort 2.1.800.2.4.5.1.1.24
The virtual channel connection best effort value for this connection.
OBJECT-TYPE    
  INTEGER false(1), true(2)  

atmxVccAcceptableTransmitTrafficDescriptor 2.1.800.2.4.5.1.1.25
The virtual channel connection traffic descriptor for this connection.
OBJECT-TYPE    
  AtmTrafficDescrTypes  

atmxVccAcceptableTransmitTrafficDescriptorParam1 2.1.800.2.4.5.1.1.26
The virtual channel connection traffic parameter 1 for this connection.
OBJECT-TYPE    
  INTEGER 0..353208  

atmxVccAcceptableTransmitTrafficDescriptorParam2 2.1.800.2.4.5.1.1.27
The virtual channel connection traffic parameter 2 for this connection.
OBJECT-TYPE    
  INTEGER 0..353208  

atmxVccAcceptableTransmitTrafficDescriptorParam3 2.1.800.2.4.5.1.1.28
The virtual channel connection traffic parameter 3 for this connection.
OBJECT-TYPE    
  INTEGER 0..353208  

atmxVccAcceptableTransmitTrafficQoSClass 2.1.800.2.4.5.1.1.29
The virtual channel connection QOS Class for this connection.
OBJECT-TYPE    
  INTEGER 0..4  

atmxVccAcceptableTransmitTrafficBestEffort 2.1.800.2.4.5.1.1.30
The virtual channel connection best effort value for this connection.
OBJECT-TYPE    
  INTEGER false(1), true(2)  

atmxVccAcceptableReceiveTrafficDescriptor 2.1.800.2.4.5.1.1.31
The virtual channel connection traffic descriptor for this connection.
OBJECT-TYPE    
  AtmTrafficDescrTypes  

atmxVccAcceptableReceiveTrafficDescriptorParam1 2.1.800.2.4.5.1.1.32
The virtual channel connection traffic parameter 1 for this connection.
OBJECT-TYPE    
  INTEGER 0..353208  

atmxVccAcceptableReceiveTrafficDescriptorParam2 2.1.800.2.4.5.1.1.33
The virtual channel connection traffic parameter 2 for this connection.
OBJECT-TYPE    
  INTEGER 0..353208  

atmxVccAcceptableReceiveTrafficDescriptorParam3 2.1.800.2.4.5.1.1.34
The virtual channel connection traffic parameter 3 for this connection.
OBJECT-TYPE    
  INTEGER 0..353208  

atmxVccAcceptableReceiveTrafficQoSClass 2.1.800.2.4.5.1.1.35
The virtual channel connection traffic QOS Class for this connection.
OBJECT-TYPE    
  INTEGER 0..4  

atmxVccAcceptableReceiveTrafficBestEffort 2.1.800.2.4.5.1.1.36
The virtual channel connection best effort value for this connection.
OBJECT-TYPE    
  INTEGER false(1), true(2)  

atmxVccActualTransmitTrafficDescriptor 2.1.800.2.4.5.1.1.37
The virtual channel connection traffic descriptor for this connection.
OBJECT-TYPE    
  AtmTrafficDescrTypes  

atmxVccActualTransmitTrafficDescriptorParam1 2.1.800.2.4.5.1.1.38
The virtual channel connection traffic parameter 1 for this connection.
OBJECT-TYPE    
  INTEGER 0..353208  

atmxVccActualTransmitTrafficDescriptorParam2 2.1.800.2.4.5.1.1.39
The virtual channel connection traffic parameter 2 for this connection.
OBJECT-TYPE    
  INTEGER 0..353208  

atmxVccActualTransmitTrafficDescriptorParam3 2.1.800.2.4.5.1.1.40
The virtual channel connection traffic parameter 3 for this connection.
OBJECT-TYPE    
  INTEGER 0..353208  

atmxVccActualTransmitTrafficQoSClass 2.1.800.2.4.5.1.1.41
The virtual channel connection QOS Class for this connection.
OBJECT-TYPE    
  INTEGER 0..4  

atmxVccActualTransmitTrafficBestEffort 2.1.800.2.4.5.1.1.42
The virtual channel connection best effort value for this connection.
OBJECT-TYPE    
  INTEGER false(1), true(2)  

atmxVccActualReceiveTrafficDescriptor 2.1.800.2.4.5.1.1.43
The virtual channel connection traffic descriptor for this connection.
OBJECT-TYPE    
  AtmTrafficDescrTypes  

atmxVccActualReceiveTrafficDescriptorParam1 2.1.800.2.4.5.1.1.44
The virtual channel connection traffic parameter 1 for this connection.
OBJECT-TYPE    
  INTEGER 0..353208  

atmxVccActualReceiveTrafficDescriptorParam2 2.1.800.2.4.5.1.1.45
The virtual channel connection traffic parameter 2 for this connection.
OBJECT-TYPE    
  INTEGER 0..353208  

atmxVccActualReceiveTrafficDescriptorParam3 2.1.800.2.4.5.1.1.46
The virtual channel connection traffic parameter 3 for this connection.
OBJECT-TYPE    
  INTEGER 0..353208  

atmxVccActualReceiveTrafficQoSClass 2.1.800.2.4.5.1.1.47
The virtual channel connection traffic QOS Class for this connection.
OBJECT-TYPE    
  INTEGER 0..4  

atmxVccActualReceiveTrafficBestEffort 2.1.800.2.4.5.1.1.48
The virtual channel connection best effort value for this connection.
OBJECT-TYPE    
  INTEGER false(1), true(2)  

atmxVccAdmStatus 2.1.800.2.4.5.1.1.49
The vcc adminstration status - used to delete a vcc.
OBJECT-TYPE    
  AtmAdminStatCodes  

atmxVccServiceUsed 2.1.800.2.4.5.1.1.50
The service number in which this vcc connection is used.
OBJECT-TYPE    
  INTEGER  

atmxVccConnectionUsed 2.1.800.2.4.5.1.1.51
Connection being used or not being used, currently not implemented.
OBJECT-TYPE    
  INTEGER  

atmxAddressTable 2.1.800.2.4.6.1
A table of ATM virtual address status and parameter information.
OBJECT-TYPE    
  SEQUENCE OF  
    AtmxAddressEntry

atmxAddressEntry 2.1.800.2.4.6.1.1
An entry in the table, containing information about the ATM virtual address.
OBJECT-TYPE    
  AtmxAddressEntry  

atmxAddressIndex 2.1.800.2.4.6.1.1.1
A unique value which identifies this address index.
OBJECT-TYPE    
  INTEGER 1..1023  

atmxAddressAtmAddress 2.1.800.2.4.6.1.1.2
A unique value which identifies this address.
OBJECT-TYPE    
  DisplayString Size(0..40)  

atmxAddressType 2.1.800.2.4.6.1.1.3
The address type.
OBJECT-TYPE    
  INTEGER arpServer(1), nonArpServer(2)  

atmxAddressVpi 2.1.800.2.4.6.1.1.4
The virtual path identifier associated with this address.
OBJECT-TYPE    
  INTEGER 0..0  

atmxAddressVci 2.1.800.2.4.6.1.1.5
The virtual channel identifier associated with this address.
OBJECT-TYPE    
  INTEGER 1..1023  

atmxAddressDescription 2.1.800.2.4.6.1.1.6
A description for this address.
OBJECT-TYPE    
  DisplayString Size(0..31)  

atmxAddressTransmitMaxSDU 2.1.800.2.4.6.1.1.7
The address maximum transmit SDU size in bytes for this SVC.
OBJECT-TYPE    
  INTEGER 8..32678  

atmxAddressReceiveMaxSDU 2.1.800.2.4.6.1.1.8
The address maximun receive SDU size in bytes for this SVC.
OBJECT-TYPE    
  INTEGER 8..32678  

atmxAddressRequestedTransmitTrafficDescriptor 2.1.800.2.4.6.1.1.9
The address traffic descriptor for this SVC.
OBJECT-TYPE    
  AtmTrafficDescrTypes  

atmxAddressRequestedTransmitTrafficDescriptorParam1 2.1.800.2.4.6.1.1.10
The address transmit parameter 1 cell rate in cells/second for this SVC.
OBJECT-TYPE    
  INTEGER 0..353208  

atmxAddressRequestedTransmitTrafficDescriptorParam2 2.1.800.2.4.6.1.1.11
The address transmit parameter 2 cell rate in cells/second for this SVC.
OBJECT-TYPE    
  INTEGER 0..353208  

atmxAddressRequestedTransmitTrafficDescriptorParam3 2.1.800.2.4.6.1.1.12
The address transmit parameter 3 cell rate in cells for this SVC.
OBJECT-TYPE    
  INTEGER 0..353208  

atmxAddressRequestedTransmitTrafficQoSClass 2.1.800.2.4.6.1.1.13
The address transmit traffic QOS Class for this SVC.
OBJECT-TYPE    
  INTEGER 0..4  

atmxAddressRequestedTransmitTrafficBestEffort 2.1.800.2.4.6.1.1.14
The address transmit traffic best effort value for this SVC.
OBJECT-TYPE    
  INTEGER false(1), true(2)  

atmxAddressRequestedReceiveTrafficDescriptor 2.1.800.2.4.6.1.1.15
The address receive traffic descriptor for this SVC.
OBJECT-TYPE    
  AtmTrafficDescrTypes  

atmxAddressRequestedReceiveTrafficDescriptorParam1 2.1.800.2.4.6.1.1.16
The address receive parameter 1 cell rate in cells/second for this SVC.
OBJECT-TYPE    
  INTEGER 0..353208  

atmxAddressRequestedReceiveTrafficDescriptorParam2 2.1.800.2.4.6.1.1.17
The address receive parameter 2 cell rate in cells/second for this SVC.
OBJECT-TYPE    
  INTEGER 0..353208  

atmxAddressRequestedReceiveTrafficDescriptorParam3 2.1.800.2.4.6.1.1.18
The address receive parameter 2 cell rate in cells for this SVC.
OBJECT-TYPE    
  INTEGER 0..353208  

atmxAddressRequestedReceiveTrafficQoSClass 2.1.800.2.4.6.1.1.19
The address receive traffic QOS Class for this SVC.
OBJECT-TYPE    
  INTEGER 0..4  

atmxAddressRequestedReceiveTrafficBestEffort 2.1.800.2.4.6.1.1.20
The address receive traffic best effort value for this SVC.
OBJECT-TYPE    
  INTEGER false(1), true(2)  

atmxAddressAcceptableTransmitTrafficDescriptor 2.1.800.2.4.6.1.1.21
The address traffic descriptor for this SVC.
OBJECT-TYPE    
  AtmTrafficDescrTypes  

atmxAddressAcceptableTransmitTrafficDescriptorParam1 2.1.800.2.4.6.1.1.22
The address transmit parameter 1 cell rate in cells/second for this SVC.
OBJECT-TYPE    
  INTEGER 0..353208  

atmxAddressAcceptableTransmitTrafficDescriptorParam2 2.1.800.2.4.6.1.1.23
The address transmit parameter 2 cell rate in cells/second for this SVC.
OBJECT-TYPE    
  INTEGER 0..353208  

atmxAddressAcceptableTransmitTrafficDescriptorParam3 2.1.800.2.4.6.1.1.24
The address transmit parameter 3 cell rate in cells for this SVC.
OBJECT-TYPE    
  INTEGER 0..353208  

atmxAddressAcceptableTransmitTrafficQoSClass 2.1.800.2.4.6.1.1.25
The address transmit traffic QOS Class for this SVC.
OBJECT-TYPE    
  INTEGER 0..4  

atmxAddressAcceptableTransmitTrafficBestEffort 2.1.800.2.4.6.1.1.26
The address transmit traffic best effort value for this SVC.
OBJECT-TYPE    
  INTEGER false(1), true(2)  

atmxAddressAcceptableReceiveTrafficDescriptor 2.1.800.2.4.6.1.1.27
The address receive traffic descriptor for this SVC.
OBJECT-TYPE    
  AtmTrafficDescrTypes  

atmxAddressAcceptableReceiveTrafficDescriptorParam1 2.1.800.2.4.6.1.1.28
The address receive parameter 1 cell rate in cells/second for this SVC.
OBJECT-TYPE    
  INTEGER 0..353208  

atmxAddressAcceptableReceiveTrafficDescriptorParam2 2.1.800.2.4.6.1.1.29
The address receive parameter 2 cell rate in cells/second for this SVC.
OBJECT-TYPE    
  INTEGER 0..353208  

atmxAddressAcceptableReceiveTrafficDescriptorParam3 2.1.800.2.4.6.1.1.30
The address receive parameter 2 cell rate in cells for this SVC.
OBJECT-TYPE    
  INTEGER 0..353208  

atmxAddressAcceptableReceiveTrafficQoSClass 2.1.800.2.4.6.1.1.31
The address receive traffic QOS Class for this SVC.
OBJECT-TYPE    
  INTEGER 0..4  

atmxAddressAcceptableReceiveTrafficBestEffort 2.1.800.2.4.6.1.1.32
The address receive traffic best effort value for this SVC.
OBJECT-TYPE    
  INTEGER false(1), true(2)  

atmxAddressAdmStatus 2.1.800.2.4.6.1.1.33
The address adminstration status - used to delete an address.
OBJECT-TYPE    
  AtmAdminStatCodes  

atmxAddressServiceUsed 2.1.800.2.4.6.1.1.34
The service number in which this address is used.
OBJECT-TYPE    
  INTEGER  

atmxAddressAddrUsed 2.1.800.2.4.6.1.1.35
Address being used or not being used, currently not implemented.
OBJECT-TYPE    
  INTEGER  

atmxArpTable 2.1.800.2.4.7.1
A table of ATM address to IP address information.
OBJECT-TYPE    
  SEQUENCE OF  
    AtmxArpEntry

atmxArpEntry 2.1.800.2.4.7.1.1
An entry in the table, containing information about the ATM address.
OBJECT-TYPE    
  AtmxArpEntry  

atmxArpIndex 2.1.800.2.4.7.1.1.1
A unique value which identifies this arp entry.
OBJECT-TYPE    
  INTEGER 1..128  

atmxArpIPAddress 2.1.800.2.4.7.1.1.2
The IP address for this atm address.
OBJECT-TYPE    
  IpAddress  

atmxArpAtmAddress 2.1.800.2.4.7.1.1.3
A unique value which identifies this address.
OBJECT-TYPE    
  DisplayString Size(0..40)  

atmxArpVci 2.1.800.2.4.7.1.1.4
The virtual channel identifier associated with this address.
OBJECT-TYPE    
  INTEGER 1..1023  

atmxArpTimeToLive 2.1.800.2.4.7.1.1.5
The address time to live.
OBJECT-TYPE    
  INTEGER  

atmxArpType 2.1.800.2.4.7.1.1.6
The address type, statically or dynamically created.
OBJECT-TYPE    
  INTEGER static(1), dynamic(2)  

atmLecConfigTable 2.1.800.2.4.8.1
This table contains all the configuration parameters for a LAN Emulation client.
OBJECT-TYPE    
  SEQUENCE OF  
    AtmLecConfigEntry

atmLecConfigEntry 2.1.800.2.4.8.1.1
Each table entry contains configuration information for one LAN Emulation Client. Most of the objects are derived from Initial State Parameters in the LAN Emulation specification.
OBJECT-TYPE    
  AtmLecConfigEntry  

atmxLecConfigIndex 2.1.800.2.4.8.1.1.1
Index to identify an instance of this table.
OBJECT-TYPE    
  INTEGER  

atmLecConfigLecsAtmAddress 2.1.800.2.4.8.1.1.2
The LAN Emulation Configuration Server which this client can use if the Well Known LECS address is not used.
OBJECT-TYPE    
  XylanAtmLaneAddress  

atmLecConfigUseDefaultLecsAddr 2.1.800.2.4.8.1.1.3
This is to specify if this client is to use the Well Know LECS address or user supplied address. This object alone with atmLecConfigLecsAtmAddress is meaningless if the atmLecConfigMode is setted to manual(2) mode. 1 = TRUE 2 = FALSE
OBJECT-TYPE    
  INTEGER  

atmLecRowStatus 2.1.800.2.4.8.1.1.4
This object lets network managers create and delete an instance for this table. 1 = Create, 2 = Delete, 3 = Modify.
OBJECT-TYPE    
  INTEGER  

atmLecRowInUse 2.1.800.2.4.8.1.1.5
This object returns a value to indicate if this instance is used by an ATM service. 1 = In use 2 = Free.
OBJECT-TYPE    
  INTEGER  

atmLecConfigMode 2.1.800.2.4.8.1.1.6
Indicates whether this LAN Emulation Client should auto-configure the next time it is (re)started. In automatic(1) mode, a client uses a LAN Emulation Configuration Server to learn the ATM address of its LAN Emulation Server, and to obtain other parameters. atmLecConfig{ LanType, MaxDataFrameSize, LanName } are used in the Configure request. atmLecConfigLesAtmAddress is ignored. In manual(2) mode, management tells the client the ATM address of its LAN Emulation Server and the values of other parameters. atmLecConfig{ LanType, MaxDataFrameSize, LanName } are used in the Join request. atmLecConfigLesAtmAddress tells the client which LES to call.
OBJECT-TYPE    
  INTEGER automatic(1), manual(2)  

atmLecConfigLanType 2.1.800.2.4.8.1.1.7
C2 LAN Type. The data frame format which this client will use the next time it returns to the Initial State. Auto-configuring clients use this parameter in their Configure requests. Manually-configured clients use it in their Join requests. This MIB object will not be overwritten with the new value from a LE_{JOIN,CONFIGURE}_RESPONSE. Instead, atmLecActualLanType will be.
OBJECT-TYPE    
  LecDataFrameFormat  

atmLecConfigMaxDataFrameSize 2.1.800.2.4.8.1.1.8
C3 Maximum Data Frame Size. The maximum data frame size which this client will use the next time it returns to the Initial State. Auto-configuring clients use this parameter in their Configure requests. Manually-configured clients use it in their Join requests. This MIB object will not be overwritten with the new value from a LE_{JOIN,CONFIGURE}_RESPONSE. Instead, atmLecActualMaxDataFrameSize will be.
OBJECT-TYPE    
  LecDataFrameSize  

atmLecConfigLanName 2.1.800.2.4.8.1.1.9
C5 ELAN Name. The ELAN Name this client will use the next time it returns to the Initial State. Auto-configuring clients use this parameter in their Configure requests. Manually-configured clients use it in their Join requests. This MIB object will not be overwritten with the new value from a LE_{JOIN,CONFIGURE}_RESPONSE. Instead, atmLecActualLanName will be.
OBJECT-TYPE    
  DisplayString Size(0..32)  

atmLecConfigLesAtmAddress 2.1.800.2.4.8.1.1.10
C9 LE Server ATM Address. The LAN Emulation Server which this client will use the next time it is started in manual configuration mode. When atmLecConfigMode is 'automatic', there is no need to set this address, and no advantage to doing so. The client will use the LECS to find a LES, putting the auto-configured address in atmLecActualLesAtmAddress while leaving atmLecConfigLesAtmAddress alone.
OBJECT-TYPE    
  XylanAtmLaneAddress  

atmLecControlTimeout 2.1.800.2.4.8.1.1.11
C7 Control Time-out. Time out period used for timing out most request/response control frame interactions, as specified elsewhere [in the LAN Emulation specification]. This time value is expressed in seconds.
OBJECT-TYPE    
  INTEGER 10..300  

atmLecMaxUnknownFrameCount 2.1.800.2.4.8.1.1.12
C10 Maximum Unknown Frame Count. See the description of atmLecMaxUnknownFrameTime below.
OBJECT-TYPE    
  INTEGER 0..10  

atmLecMaxUnknownFrameTime 2.1.800.2.4.8.1.1.13
C11 Maximum Unknown Frame Time. Within the period of time defined by the Maximum Unknown Frame Time, a LE Client will send no more than Maximum Unknown Frame Count frames to the BUS for a given unicast LAN Destination, and it must also initiate the address resolution protocol to resolve that LAN Destination. This time value is expressed in seconds.
OBJECT-TYPE    
  INTEGER 1..60  

atmLecVccTimeoutPeriod 2.1.800.2.4.8.1.1.14
C12 VCC Time-out Period. A LE Client SHOULD release any Data Direct VCC that it has not used to transmit or receive any data frames for the length of the VCC Time-out Period. This parameter is only meaningful for SVC Data Direct VCCs. This time value is expressed in seconds. The default value is 20 minutes. A value of 0 seconds means that the timeout period is infinite. Negative values will be rejected by the agent.
OBJECT-TYPE    
  INTEGER  

atmLecMaxRetryCount 2.1.800.2.4.8.1.1.15
C13 Maximum Retry Count. A LE CLient MUST not retry a LE_ARP_REQUEST for a given frame's LAN destination more than Maximum Retry Count times, after the first LE_ARP_REQUEST for that same frame's LAN destination.
OBJECT-TYPE    
  INTEGER 0..2  

atmLecAgingTime 2.1.800.2.4.8.1.1.16
C17 Aging Time. The maximum time that a LE Client will maintain an entry in its LE_ARP cache in the absence of a verification of that relationship. This time value is expressed in seconds.
OBJECT-TYPE    
  INTEGER 10..300  

atmLecForwardDelayTime 2.1.800.2.4.8.1.1.17
C18 Forward Delay Time. The maximum time that a LE Client will maintain an entry for a non-local MAC address in its LE_ARP cache in the absence of a verification of that relationship, as long as the Topology Change flag C19 is true. atmLecForwardDelayTime SHOULD BE less than atmLecAgingTime. When it is not, atmLecAgingTime governs LE_ARP aging. This time value is expressed in seconds.
OBJECT-TYPE    
  INTEGER 4..30  

atmLecExpectedArpResponseTime 2.1.800.2.4.8.1.1.18
C20 Expected LE_ARP Reponse Time. The maximum time that the LEC expects an LE_ARP_REQUEST/ LE_ARP_RESPONSE cycle to take. Used for retries and verifies. This time value is expressed in seconds.
OBJECT-TYPE    
  INTEGER 1..30  

atmLecFlushTimeOut 2.1.800.2.4.8.1.1.19
C21 Flush Time-out. Time limit to wait to receive a LE_FLUSH_RESPONSE after the LE_FLUSH_REQUEST has been sent before taking recovery action. This time value is expressed in seconds.
OBJECT-TYPE    
  INTEGER 1..4  

atmLecPathSwitchingDelay 2.1.800.2.4.8.1.1.20
C22 Path Switching Delay. The time since sending a frame to the BUS after which the LE Client may assume that the frame has been either discarded or delivered to the recipient. May be used to bypass the Flush protocol. This time value is expressed in seconds.
OBJECT-TYPE    
  INTEGER 1..8  

atmLecUseForwardDelay 2.1.800.2.4.8.1.1.21
This is specify whether to use Forward delay or arp cache aging time 1 = No, 2 = Yes.
OBJECT-TYPE    
  INTEGER 1..2  

atmLecUseTranslation 2.1.800.2.4.8.1.1.23
Use translation option or not. If set to yes, user must set the translation options by the swch command in UI or the vportSwitchTable to set the translation option other than the default defined for LANE. 1 = no, 2 = yes.
OBJECT-TYPE    
  INTEGER 1..2  

atmLecSrBridgeNum 2.1.800.2.4.8.1.1.24
SR bridge number for the LEC
OBJECT-TYPE    
  INTEGER 1..15  

atmLecSrRingNum 2.1.800.2.4.8.1.1.25
SR Ring number for the LEC
OBJECT-TYPE    
  INTEGER 1..4095  

atmLecStatusTable 2.1.800.2.4.8.2
A read-only table containing identification, status, and operational information about the LAN Emulation Clients this agent manages.
OBJECT-TYPE    
  SEQUENCE OF  
    AtmLecStatusEntry

atmLecStatusEntry 2.1.800.2.4.8.2.1
Each table entry contains information about one LAN Emulation Client.
OBJECT-TYPE    
  AtmLecStatusEntry  

atmxLecStatusSlotIndex 2.1.800.2.4.8.2.1.1
Slot index to identify an instance of this table.
OBJECT-TYPE    
  INTEGER  

atmxLecStatusPortIndex 2.1.800.2.4.8.2.1.2
Port index to identify an instance of this table.
OBJECT-TYPE    
  INTEGER  

atmxLecStatusServiceNum 2.1.800.2.4.8.2.1.3
Service number index to identify an instance of this table.
OBJECT-TYPE    
  INTEGER  

atmLecPrimaryAtmAddress 2.1.800.2.4.8.2.1.4
C1 LE Client's ATM Addresses. The primary ATM address of this LAN Emulation Client. This address is used to establish the Control Direct and Multicast Send VCCs, and may also be used to set up Data Direct VCCs. A client may have additional ATM addresses for use with Data Direct VCCs. These addresses are readable via the atmLecAtmAddressTable.
OBJECT-TYPE    
  XylanAtmLaneAddress  

atmLecID 2.1.800.2.4.8.2.1.5
C14 LE Client Identifier. Each LE Client requires a LE Client Identifier (LECID) assigned by the LE Server during the Join phase. The LECID is placed in control requests by the LE Client and MAY be used for echo suppression on multicast data frames sent by that LE Client. This value MUST NOT change without terminating the LE Client and returning to the Initial state. A valid LECID MUST be in the range X'0001' through X'FEFF'. The value of this object is only meaningful for a LEC that is connected to a LES. For a LEC which does not belong to an emulated LAN, the value of this object is defined to be 0.
OBJECT-TYPE    
  INTEGER 0..65279  

atmLecInterfaceState 2.1.800.2.4.8.2.1.6
The mandatory state of the LAN Emulation Client. Note that 'ifOperStatus' is defined to be 'up' when, and only when, 'atmLecInterfaceState' is 'operational'.
OBJECT-TYPE    
  LecState  

atmLecLastFailureRespCode 2.1.800.2.4.8.2.1.7
Status code from the last failed Configure response or Join response. Failed responses are those for which the LE_CONFIGURE_RESPONSE / LE_JOIN_RESPONSE frame contains a non-zero code, or fails to arrive within a timeout period. If none of this client's requests have failed, this object has the value 'none'. If the failed response contained a STATUS code that is not defined in the LAN Emulation specification, this object has the value 'undefinedError'. The value 'timeout' is self-explanatory. Other failure codes correspond to those defined in the specification, although they may have different numeric values.
OBJECT-TYPE    
  INTEGER none(1), timeout(2), undefinedError(3), versionNotSupported(4), invalidRequestParameters(5), duplicateLanDestination(6), duplicateAtmAddress(7), insufficientResources(8), accessDenied(9), invalidRequesterId(10), invalidLanDestination(11), invalidAtmAddress(12), noConfiguration(13), leConfigureError(14), insufficientInformation(15)  

atmLecLastFailureState 2.1.800.2.4.8.2.1.8
The state this client was in when it updated the 'atmLecLastFailureRespCode'. If 'atmLecLastFailureRespCode' is 'none', this object has the value initialState(1).
OBJECT-TYPE    
  LecState  

atmLecProtocol 2.1.800.2.4.8.2.1.9
The LAN Emulation protocol which this client supports, and specifies in its LE_JOIN_REQUESTs.
OBJECT-TYPE    
  INTEGER 1..255  

atmLecVersion 2.1.800.2.4.8.2.1.10
The LAN Emulation protocol version which this client supports, and specifies in its LE_JOIN_REQUESTs.
OBJECT-TYPE    
  INTEGER 1..255  

atmLecTopologyChange 2.1.800.2.4.8.2.1.11
C19 Topology Change. Boolean indication that the LE Client is using the Forward Delay Time C18, instead of the Aging Time C17, to age non-local entries in its LE_ARP cache C16. For a client which is not connected to the LES, this object is defined to have the value 'false'.
OBJECT-TYPE    
  INTEGER  

atmLecConfigServerAtmAddress 2.1.800.2.4.8.2.1.12
The ATM address of the LAN Emulation Configuration Server (if known) or the empty string (otherwise).
OBJECT-TYPE    
  XylanAtmLaneAddress  

atmLecConfigSource 2.1.800.2.4.8.2.1.13
Indicates whether this LAN Emulation Client used the LAN Emulation Configuration Server, and, if so, what method it used to establish the Configuration Direct VCC.
OBJECT-TYPE    
  INTEGER gotAddressViaIlmi(1), usedWellKnownAddress(2), usedLecsPvc(3), didNotUseLecs(4)  

atmLecActualLanType 2.1.800.2.4.8.2.1.14
C2 LAN Type. The data frame format that this LAN Emulation Client is using right now. This may come from * atmLecConfigLanType, * the LAN Emulation Configuration Server, or * the LAN Emulation Server This value is related to 'ifMtu' and 'ifType'. See the LEC management specification for more details.
OBJECT-TYPE    
  LecDataFrameFormat  

atmLecActualMaxDataFrameSize 2.1.800.2.4.8.2.1.15
C3 Maximum Data Frame Size. The maximum data frame size that this LAN Emulation client is using right now. This may come from * atmLecConfigMaxDataFrameSize, * the LAN Emulation Configuration Server, or * the LAN Emulation Server
OBJECT-TYPE    
  LecDataFrameSize  

atmLecActualLanName 2.1.800.2.4.8.2.1.16
C5 ELAN Name. The identity of the emulated LAN which this client last joined, or wishes to join. This may come from * atmLecConfigLanName, * the LAN Emulation Configuration Server, or * the LAN Emulation Server
OBJECT-TYPE    
  DisplayString Size(0..32)  

atmLecActualLesAtmAddress 2.1.800.2.4.8.2.1.17
C9 LE Server ATM Address. The LAN Emulation Server address currently in use or most recently attempted. If no LAN Emulation Server attachment has been tried, this object's value is the zero-length string.
OBJECT-TYPE    
  XylanAtmLaneAddress  

atmLecProxyClient 2.1.800.2.4.8.2.1.18
C4 Proxy. Indicates whether this client is acting as a proxy. Proxy clients are allowed to represent unregistered MAC addresses, and receive copies of LE_ARP_REQUEST frames for such addresses.
OBJECT-TYPE    
  INTEGER  

atmLecStatisticsTable 2.1.800.2.4.8.3
An extension table containing traffic statistics for all the LAN Emulation Clients this host implements.
OBJECT-TYPE    
  SEQUENCE OF  
    AtmLecStatisticsEntry

atmLecStatisticsEntry 2.1.800.2.4.8.3.1
Each row in this table contains traffic statistics for one LAN Emulation client.
OBJECT-TYPE    
  AtmLecStatisticsEntry  

atmxLecStatsSlotIndex 2.1.800.2.4.8.3.1.1
Slot index to identify an instance of this table.
OBJECT-TYPE    
  INTEGER  

atmxLecStatsPortIndex 2.1.800.2.4.8.3.1.2
Port index to identify an instance of this table.
OBJECT-TYPE    
  INTEGER  

atmxLecStatsServiceNum 2.1.800.2.4.8.3.1.3
Service number index to identify an instance of this table.
OBJECT-TYPE    
  INTEGER  

atmLecArpRequestsOut 2.1.800.2.4.8.3.1.4
The number of LE_ARP_REQUESTs sent over the LUNI by this LAN Emulation Client.
OBJECT-TYPE    
  Counter  

atmLecArpRequestsIn 2.1.800.2.4.8.3.1.5
The number of LE_ARP_REQUESTs received over the LUNI by this LAN Emulation Client. Requests may arrive on the Control Direct VCC or on the Control Distribute VCC, depending upon how the LES is implemented and the chances it has had for learning. This counter covers both VCCs.
OBJECT-TYPE    
  Counter  

atmLecArpRepliesOut 2.1.800.2.4.8.3.1.6
The number of LE_ARP_RESPONSEs sent over the LUNI by this LAN Emulation Client.
OBJECT-TYPE    
  Counter  

atmLecArpRepliesIn 2.1.800.2.4.8.3.1.7
The number of LE_ARP_RESPONSEs received over the LUNI by this LAN Emulation Client. This count includes all such replies, whether solicited or not. Replies may arrive on the Control Direct VCC or on the Control Distribute VCC, depending upon how the LES is implemented. This counter covers both VCCs.
OBJECT-TYPE    
  Counter  

atmLecControlFramesOut 2.1.800.2.4.8.3.1.8
The total number of control packets sent by this LAN Emulation Client over the LUNI.
OBJECT-TYPE    
  Counter  

atmLecControlFramesIn 2.1.800.2.4.8.3.1.9
The total number of control packets received by this LAN Emulation Client over the LUNI.
OBJECT-TYPE    
  Counter  

atmLecSvcFailures 2.1.800.2.4.8.3.1.10
The total number of * outgoing LAN Emulation SVCs which this client tried, but failed, to open; * incoming LAN Emulation SVCs which this client tried, but failed to establish; and * incoming LAN Emulation SVCs which this client rejected for protocol or security reasons.
OBJECT-TYPE    
  Counter  

atmLecServerVccTable 2.1.800.2.4.8.4
A table identifying the Control and Multicast VCCs for each LAN Emulation Client this host implements.
OBJECT-TYPE    
  SEQUENCE OF  
    AtmLecServerVccEntry

atmLecServerVccEntry 2.1.800.2.4.8.4.1
Each row in this table describes the Control VCCs and Multicast VCCs for one LAN Emulation client.
OBJECT-TYPE    
  AtmLecServerVccEntry  

atmxLecSlotIndex 2.1.800.2.4.8.4.1.1
index that uniquely identify an instance of the atmLecServerVccTable.
OBJECT-TYPE    
  INTEGER  

atmxLecPortIndex 2.1.800.2.4.8.4.1.2
index that uniquely identify an instance of the atmLecServerVccTable.
OBJECT-TYPE    
  INTEGER  

atmxLecServiceNum 2.1.800.2.4.8.4.1.3
Index that uniquely identify an instance of the atmLecServerVccTable.
OBJECT-TYPE    
  INTEGER  

atmLecConfigDirectVpi 2.1.800.2.4.8.4.1.4
If the Configuration Direct VCC exists, this object contains the VPI which identifies that VCC at the point where it connects to this LE client. Otherwise, this object has the value 0.
OBJECT-TYPE    
  VpiInteger  

atmLecConfigDirectVci 2.1.800.2.4.8.4.1.5
If the Configuration Direct VCC exists, this object contains the VCI which identifies that VCC at the point where it connects to this LE client. Otherwise, this object has the value 0.
OBJECT-TYPE    
  VciInteger  

atmLecControlDirectVpi 2.1.800.2.4.8.4.1.6
If the Control Direct VCC exists, this object contains the VPI which identifies that VCC at the point where it connects to this LE client. Otherwise, this object has the value 0.
OBJECT-TYPE    
  VpiInteger  

atmLecControlDirectVci 2.1.800.2.4.8.4.1.7
If the Control Direct VCC exists, this object contains the VCI which identifies that VCC at the point where it connects to this LE client. Otherwise, this object has the value 0.
OBJECT-TYPE    
  VciInteger  

atmLecControlDistributeVpi 2.1.800.2.4.8.4.1.8
If the Control Distribute VCC exists, this object contains the VPI which identifies that VCC at the point where it connects to this LE client. Otherwise, this object has the value 0.
OBJECT-TYPE    
  VpiInteger  

atmLecControlDistributeVci 2.1.800.2.4.8.4.1.9
If the Control Distribute VCC exists, this object contains the VCI which identifies that VCC at the point where it connects to this LE client. Otherwise, this object contains the value 0.
OBJECT-TYPE    
  VciInteger  

atmLecMulticastSendVpi 2.1.800.2.4.8.4.1.10
If the Multicast Send VCC exists, this object contains the VPI which identifies that VCC at the point where it connects to this LE client. Otherwise, this object has the value 0.
OBJECT-TYPE    
  VpiInteger  

atmLecMulticastSendVci 2.1.800.2.4.8.4.1.11
If the Multicast Send VCC exists, this object contains the VCI which identifies that VCC at the point where it connects to this LE client. Otherwise, this object has the value 0.
OBJECT-TYPE    
  VciInteger  

atmLecMulticastForwardVpi 2.1.800.2.4.8.4.1.12
If the Multicast Forward VCC exists, this object contains the VPI which identifies that VCC at the point where it connects to this LE client. Otherwise, this object has the value 0.
OBJECT-TYPE    
  VpiInteger  

atmLecMulticastForwardVci 2.1.800.2.4.8.4.1.13
If the Multicast Forward VCC exists, this object contains the VCI which identifies that VCC at the point where it connects to this LE client. Otherwise, this object has the value 0.
OBJECT-TYPE    
  VciInteger  

atmLeArpTable 2.1.800.2.4.8.5
This table provides access to an ATM LAN Emulation Client's MAC-to-ATM ARP cache. It contains entries for unicast addresses and for the broadcast address, but not for multicast MAC addresses. C16 LE_ARP Cache. A table of entries, each of which establishes a relationship between a LAN Destination external to the LE Client and the ATM address to which data frames for that LAN Destination will be sent.
OBJECT-TYPE    
  SEQUENCE OF  
    AtmLeArpEntry

atmLeArpEntry 2.1.800.2.4.8.5.1
An ATM LAN Emulation ARP cache entry containing information about the binding of one MAC address to one ATM address.
OBJECT-TYPE    
  AtmLeArpEntry  

atmxLeArpSlotIndex 2.1.800.2.4.8.5.1.1
Slot index that uniquely identify an instance of the LeArp Table.
OBJECT-TYPE    
  INTEGER  

atmxLeArpPortIndex 2.1.800.2.4.8.5.1.2
Port index that uniquely identify an instance of the LeArp Table.
OBJECT-TYPE    
  INTEGER  

atmxLeArpServiceNum 2.1.800.2.4.8.5.1.3
Service number index that uniquely identify an instance of the LeArp Table.
OBJECT-TYPE    
  INTEGER  

atmLeArpIndex 2.1.800.2.4.8.5.1.4
Index that uniquely identify an instance of the LeArp Table.
OBJECT-TYPE    
  INTEGER  

atmLeArpMacAddress 2.1.800.2.4.8.5.1.5
The MAC address for which this cache entry provides a translation. Since ATM LAN Emulation uses an ARP protocol to locate the Broadcast and Unknown Server, the value of this object could be the broadcast MAC address. MAC addresses should be unique within any given ATM Emulated LAN. However, there's no requirement that they be unique across disjoint emulated LANs.
OBJECT-TYPE    
  MacAddress  

atmLeArpAtmAddress 2.1.800.2.4.8.5.1.6
The ATM address of the Broadcast & Unknown Server or LAN Emulation Client whose MAC address is stored in 'atmLeArpMacAddress'. This value may be determined through the use of the LE_ARP procedure, through source address learning, or through other mechanisms. Some agents may provide write access to this object, as part of their support for 'static' LE_ARP entries. The effect of attempting to write an ATM address to a 'learned' row is explicitly undefined. Agents may disallow the write, accept the write and change the row's type, or even accept the write as-is.
OBJECT-TYPE    
  XylanAtmLaneAddress  

atmLeArpIsRemoteAddress 2.1.800.2.4.8.5.1.7
Indicates whether this entry is for a local or remote MAC address. In this context, 'local' means 'a MAC address that is local to the remote client', as opposed to 'one of my addresses'. true(1) The address is believed to be remote - or its local/remote status is unknown. For an entry created via the LE_ARP mechanism, this corresponds to the 'Remote address' flag being set in the LE_ARP_RESPONSE. During Topology Change periods, remote LE_ARP entries generally age out faster than others. Specifically, they are subject to the Forward Delay Time as well as to the Aging Time. false(2) The address is believed to be local - that is to say, registered with the LES by the client whose ATM address is atmLeArpAtmAddress. For an entry created via the LE_ARP mechanism, this corresponds to the 'Remote address' flag being cleared in the LE_ARP_RESPONSE.
OBJECT-TYPE    
  INTEGER  

atmLeArpEntryType 2.1.800.2.4.8.5.1.8
Indicates how this LE_ARP table entry was created and whether it is aged.
OBJECT-TYPE    
  LeArpTableEntryType  

atmLeArpVpi 2.1.800.2.4.8.5.1.9
Indicates the vpi that this MAC is used to for it Data Direct VCC.
OBJECT-TYPE    
  VpiInteger  

atmLeArpVci 2.1.800.2.4.8.5.1.10
Indicates the vci that this MAC is used to for it Data Direct VCC.
OBJECT-TYPE    
  VciInteger  

atmLeArpAge 2.1.800.2.4.8.5.1.11
Indicates the time in second that this entry is being verified.
OBJECT-TYPE    
  INTEGER  

atmLeArpType 2.1.800.2.4.8.5.1.12
Indicates if this entry represents a SR RD or a ESI.
OBJECT-TYPE    
  LeArpType  

xylanLecConfigTable 2.1.800.2.4.8.6
A supplementary table of the lecConfigTable in ATM Forum MIB providing additional information for creating and starting LEC service. This table is indexed by the lecIndex. Each row corresponding to the row with the same lecIndex in the lecConfigTable.
OBJECT-TYPE    
  SEQUENCE OF  
    XylanLecConfigEntry

xylanLecConfigEntry 2.1.800.2.4.8.6.1
Each row contains a slot number, a port number, a service number and a group number for the LEC service.
OBJECT-TYPE    
  XylanLecConfigEntry  

xylanLecSlotNumber 2.1.800.2.4.8.6.1.1
The slot on which the ASM/FCSM module is located. The LEC service is to be created on that module. When a row has just been created, the first slot which has the ASM/FCSM module is assigned to this instance. If this number is not changed. The service will be created based on this assigned slot number.
OBJECT-TYPE    
  INTEGER  

xylanLecPortNumber 2.1.800.2.4.8.6.1.2
The port of the ASM/FCSM module on which The LEC service is to be created. When a row has just been created, the first available port of the ASM/FCSM module is assigned to this instance. If this number is not changed. The service will be created based on this assigned port number.
OBJECT-TYPE    
  INTEGER  

xylanLecServiceNumber 2.1.800.2.4.8.6.1.3
The service number which is assigned by the system.
OBJECT-TYPE    
  INTEGER  

xylanLecGroupNumber 2.1.800.2.4.8.6.1.4
The group to which the LEC service belong. When a row has just been created, the default group number is assigned to this instance. If this number is not changed. The service will be created based on this assigned group number.
OBJECT-TYPE    
  INTEGER  

atmCIPStatisticsTable 2.1.800.2.4.9.1
An extension table containing traffic statistics for all the Classical IP this host implements.
OBJECT-TYPE    
  SEQUENCE OF  
    AtmCIPStatisticsEntry

atmCIPStatisticsEntry 2.1.800.2.4.9.1.1
Each row in this table contains traffic statistics for one Classical IP Service.
OBJECT-TYPE    
  AtmCIPStatisticsEntry  

atmxCIPSlotIndex 2.1.800.2.4.9.1.1.1
Slot index to identify an instance of this table.
OBJECT-TYPE    
  INTEGER  

atmxCIPPortIndex 2.1.800.2.4.9.1.1.2
Port index to identify an instance of this table.
OBJECT-TYPE    
  INTEGER  

atmxCIPServiceNum 2.1.800.2.4.9.1.1.3
Service number index to identify an instance of this table.
OBJECT-TYPE    
  INTEGER  

atmCIPpktsFromIP 2.1.800.2.4.9.1.1.4
The number of packets received form IP.
OBJECT-TYPE    
  Counter  

atmCIPBroadcastPktFromIP 2.1.800.2.4.9.1.1.5
The number of Broadcast packets received form IP.
OBJECT-TYPE    
  Counter  

atmCIPPktsFromIPDiscard 2.1.800.2.4.9.1.1.6
The number of packets received form IP discarded.
OBJECT-TYPE    
  Counter  

atmCIPPktsToIP 2.1.800.2.4.9.1.1.7
The number of packets sent to IP.
OBJECT-TYPE    
  Counter  

atmCIPPktsFromNet 2.1.800.2.4.9.1.1.8
The number of packets received from the Network.
OBJECT-TYPE    
  Counter  

atmCIPPktsFromNetDiscard 2.1.800.2.4.9.1.1.9
The number of packets sent to IP discarded.
OBJECT-TYPE    
  Counter  

atmCIPArpRespFromNet 2.1.800.2.4.9.1.1.10
The number of Arp response packet received form the network.
OBJECT-TYPE    
  Counter  

atmCIPArpReqFromNet 2.1.800.2.4.9.1.1.11
The number of Arp request packet received form the network.
OBJECT-TYPE    
  Counter  

atmCIPInvArpRespFromNet 2.1.800.2.4.9.1.1.12
The number of Inverse Arp response packet received form the network.
OBJECT-TYPE    
  Counter  

atmCIPInvArpReqFromNet 2.1.800.2.4.9.1.1.13
The number of Inverse Arp request packet received form the network.
OBJECT-TYPE    
  Counter  

atmCIPInvArpNakFromNet 2.1.800.2.4.9.1.1.14
The number of Inverse Arp negative acknowledgement packet received form the network.
OBJECT-TYPE    
  Counter  

atmCIPPktsToNet 2.1.800.2.4.9.1.1.15
The number of packets sent to the network.
OBJECT-TYPE    
  Counter  

atmCIPPktsToNetDiscard 2.1.800.2.4.9.1.1.16
The number of packets sent to the network.
OBJECT-TYPE    
  Counter  

atmCIPArpRespToNet 2.1.800.2.4.9.1.1.17
The number of Arp response packet sent to the network.
OBJECT-TYPE    
  Counter  

atmCIPArpReqToNet 2.1.800.2.4.9.1.1.18
The number of Arp request packet sent to the network.
OBJECT-TYPE    
  Counter  

atmCIPInvArpRespToNet 2.1.800.2.4.9.1.1.19
The number of Inverse Arp response packet sent to the network.
OBJECT-TYPE    
  Counter  

atmCIPInvArpReqToNet 2.1.800.2.4.9.1.1.20
The number of Inverse Arp request packet sent to the network.
OBJECT-TYPE    
  Counter  

atmCIPInvArpNakToNet 2.1.800.2.4.9.1.1.21
The number of Inverse Arp negative acknowledge packet sent to the network.
OBJECT-TYPE    
  Counter  

atmGpToVcMappingTable 2.1.800.2.4.12.1
An extension table containing mapping info for all group to VCI (and VPI) mapping for 1 Scaling service. This table is for create, delete 1 mapping entry. Utilize atmxServiceGroup to create or delete a 1483 Scaling Service. Create 1483 Scaling Service only with 1 group and 1 vc thru the atmxServiceGroup. Adding or removing other group-to-vc mapping should then use this atmx1483ScaleGroup.
OBJECT-TYPE    
  SEQUENCE OF  
    AtmGpToVcMappingEntry

atmGpToVcMappingEntry 2.1.800.2.4.12.1.1
Each row in this table contains mapping info for 1 group to 1 VCI (and 1 VPI) entry. The value for VPI must be zero (0).
OBJECT-TYPE    
  AtmGpToVcMappingEntry  

atmxGpToVcSlotIndex 2.1.800.2.4.12.1.1.1
Slot index to identify an instance of this table.
OBJECT-TYPE    
  INTEGER  

atmxGpToVcPortIndex 2.1.800.2.4.12.1.1.2
Port index to identify an instance of this table.
OBJECT-TYPE    
  INTEGER  

atmxGpToVcServiceNum 2.1.800.2.4.12.1.1.3
Service number index to identify an instance of this table.
OBJECT-TYPE    
  INTEGER  

atmxGpToVcGroupId 2.1.800.2.4.12.1.1.4
Group number index to identify an instance of this table.
OBJECT-TYPE    
  INTEGER  

atmxGpToVcVpi 2.1.800.2.4.12.1.1.5
The VPI for 1 Scaling Service. VPI can only be zero .
OBJECT-TYPE    
  INTEGER  

atmxGpToVcVci 2.1.800.2.4.12.1.1.6
The VCI for 1 Scaling Service. The range for VCI is from 1 to 1000.
OBJECT-TYPE    
  INTEGER  

atmxGpToVcRowStatus 2.1.800.2.4.12.1.1.7
Row Status indicates the state of a entry of this mapping table. For a Get-operation, the value to be returned values can be ACTIVE or INACTIVE. This RowStatus will return ACTIVE, if the atmxServiceAdminStatus (an object in atmxSerivceGroup) is set to ENABLE. RowStatus will be INACTIVE if atmxServiceAdminStatus is set to a value other than ENABLE. RowStatus can only set to CREATE or DELETE. The values ACTIVE and INACTIVE are read only. For a Set-operation, values to be set can be CREATE or DELETE. Utilize atmxServiceGroup to create or delete a 1483 Scaling Service. Create 1483 Scaling Service only with 1 group and 1 vc thru the atmxServiceGroup. Adding or removing other group-to-vc mapping should then use this atmx1483ScaleGroup.
OBJECT-TYPE    
  INTEGER create(1), delete(2), active(3), inactive(4)  

atmGpToVcBulkMappingTable 2.1.800.2.4.12.2
An extension table containing mapping (bulk) info for all group to VCI (and VPI) mapping for 1 Scaling service. This table can only have 1 row. This table is for updating the whole mapping list (ie. all mapping entries ) at one time.
OBJECT-TYPE    
  SEQUENCE OF  
    AtmGpToVcBulkMappingEntry

atmGpToVcBulkMappingEntry 2.1.800.2.4.12.2.1
There is only 1 row in this table. This row contains all group to VCI (and VPI) mapping for 1 Scaling service. There are 3 indices for this table. The value for VPI must be zero (0).
OBJECT-TYPE    
  AtmGpToVcBulkMappingEntry  

atmxGpToVcBulkSlotIndex 2.1.800.2.4.12.2.1.1
Slot index to identify a Scaling service.
OBJECT-TYPE    
  INTEGER  

atmxGpToVcBulkPortIndex 2.1.800.2.4.12.2.1.2
Port index to identify a Scaling service.
OBJECT-TYPE    
  INTEGER  

atmxGpToVcBulkServiceNum 2.1.800.2.4.12.2.1.3
Service number index to identify a Scaling service.
OBJECT-TYPE    
  INTEGER  

atmxGpToVcBulkNumOfNodes 2.1.800.2.4.12.2.1.4
Number of group to VCI (and VPI) mapping inside the bulk mapping list.
OBJECT-TYPE    
  INTEGER  

atmxGpToVcBulkMappingList 2.1.800.2.4.12.2.1.5
A list containing all group to VCI (and VPI) mapping entries. Each mapping entry has the following fields having the exact order : a) Group Number (4 bytes) b) VPI (2 bytes) c) VCI (2 bytes) A total of 8 bytes for each mapping structure. There is no separator in between matching structures, nor is a end-of-string in this whole matching list. The size of this whole mapping list must be a multiple of 8 bytes. For Set-Operations, if a user wants to update the mapping list, he must send the whole mapping list buffer.
OBJECT-TYPE    
  OCTET STRING Size(8..8000)  

atmxBwgTable 2.1.800.2.4.11.1
A table of Bandwidth group parameters for Traffic Shaping
OBJECT-TYPE    
  SEQUENCE OF  
    AtmxBwgEntry

atmxBwgEntry 2.1.800.2.4.11.1.1
An entry in the table, containing information about the Traffic parameters for each of the 8 bandwidth groups
OBJECT-TYPE    
  AtmxBwgEntry  

atmxBwgSlotIndex 2.1.800.2.4.11.1.1.1
A unique value which identifies this hsm board slot.
OBJECT-TYPE    
  INTEGER 1..9  

atmxBwgPortIndex 2.1.800.2.4.11.1.1.2
A unique value which identifies this atm submodule port.
OBJECT-TYPE    
  INTEGER 1..2  

atmxBwgNum 2.1.800.2.4.11.1.1.3
A unique value that identifies the bwg
OBJECT-TYPE    
  INTEGER 1..8  

atmxBwgBE 2.1.800.2.4.11.1.1.4
Whether to use Best Effort for tx data.
OBJECT-TYPE    
  INTEGER true(1), false(2)  

atmxBwgPcr 2.1.800.2.4.11.1.1.5
The value of the Peak Cell Rate(Kbps) as defined in the Traffic Management Specification Version 4.0. atmxBwgPcr has no meaning when atmxBwgBE is equal to true.
OBJECT-TYPE    
  INTEGER 535..150000  

atmxBwgScr 2.1.800.2.4.11.1.1.6
The value of the Sustained Cell Rate(Kbps) as defined in the Traffic Management Specification Version 4.0. atmxBwgScr must be less or equal to atmxBwgPcr. atmxBwgScr has no meaning when atmxBwgBE is equal to true.
OBJECT-TYPE    
  INTEGER 35..150000  

atmxBwgMbs 2.1.800.2.4.11.1.1.7
The value of the max burst size when interleaving traffic from multiple sources as defined in the 4.0 Traffic Management specification. atmxBwgMbs has no meaning when atmxBwgBE is equal to true.
OBJECT-TYPE    
  INTEGER 1..124  

atmxBwgOperStatus 2.1.800.2.4.11.1.1.8
If the bwg is being used by any service we return inService(2) , or we return outOfService(3).
OBJECT-TYPE    
  AtmOperStatCodes  

atmxBwgServiceTable 2.1.800.2.4.11.2
A table of Service group parameters for Traffic Shaping
OBJECT-TYPE    
  SEQUENCE OF  
    AtmxBwgServiceEntry

atmxBwgServiceEntry 2.1.800.2.4.11.2.1
Each entry represents an BandWidthGroup to Service mapping.
OBJECT-TYPE    
  AtmxBwgServiceEntry  

atmxBwgServiceNum 2.1.800.2.4.11.2.1.1
A unique value which identifies a service.
OBJECT-TYPE    
  INTEGER