RBN-PVC-MIB
File:
RBN-PVC-MIB.mib (35978 bytes)
Imported modules
Imported symbols
Defined Types
RbnFrameRelayEncapsulation |
|
The encapsulation types supported by frame relay. |
TEXTUAL-CONVENTION |
|
|
|
|
INTEGER |
auto1490(1), bridge1490(2), multi1490(3), route1490(4), l2tp(5), l2tpVcMuxed(6), ppp(7), pppAuto(8), pppOverEthernet(9), dot1q1490(10), clips1490(11), pppAutoNopoe(12) |
|
RbnAtmEncapsulation |
|
The encapsulation types supported by ATM. |
TEXTUAL-CONVENTION |
|
|
|
|
INTEGER |
unknown(0), auto1483(1), bridge1483(2), multi1483(3), route1483(4), l2tp(5), l2tpVcMuxed(6), ppp(7), pppAuto(8), pppOverEthernet(9), pppSerial(10), pppNlpid(11), pppLlc(12), pppVcMuxed(13), raw(14), dot1q1483(15), clips1483(16), pppAutoNopoe(17), cell(18) |
|
RbnDot1qEncapsulation |
|
The encapsulation types supported by 802.1Q PVC. |
TEXTUAL-CONVENTION |
|
|
|
|
INTEGER |
unknown(0), ipOverEthernet(1), dot1qMulti(2), pppOverEthernet(3), dot1qRaw(4), dot1qClips(5), dot1qTunnelMulti(6), dot1qTunnelPppOverEthernet(7), dot1qTunnelRaw(8), dot1qTunnelClips(9) |
|
RbnPvcCircuitType |
|
The PVC circuit type. |
TEXTUAL-CONVENTION |
|
|
|
|
INTEGER |
explicit(1), explicitRange(2), onDemandRange(3), protection(4) |
|
RbnAtmPvcConfigEntry |
|
SEQUENCE |
|
|
|
|
rbnAtmPvcSlot |
RbnSlot |
|
|
rbnAtmPvcPort |
RbnPort |
|
|
rbnAtmPvcVpi |
Unsigned32 |
|
|
rbnAtmPvcVci |
Unsigned32 |
|
|
rbnAtmPvcProfileName |
SnmpAdminString |
|
|
rbnAtmPvcEncapsulation |
RbnAtmEncapsulation |
|
|
rbnAtmPvcRowStatus |
RowStatus |
|
|
rbnAtmPvcCircuitType |
RbnPvcCircuitType |
|
|
rbnAtmPvcCircuitHandle |
RbnCircuitHandle |
|
|
rbnAtmPvcClearCircuit |
TruthValue |
|
RbnFrameRelayPvcConfigEntry |
|
SEQUENCE |
|
|
|
|
rbnFrameRelayPvcSlot |
RbnSlot |
|
|
rbnFrameRelayPvcPort |
RbnPort |
|
|
rbnFrameRelayPvcChannel |
Unsigned32 |
|
|
rbnFrameRelayPvcDLCI |
Unsigned32 |
|
|
rbnFrameRelayPvcProfileName |
SnmpAdminString |
|
|
rbnFrameRelayPvcEncapsulation |
RbnFrameRelayEncapsulation |
|
|
rbnFrameRelayPvcRowStatus |
RowStatus |
|
|
rbnFrameRelayPvcCircuitType |
RbnPvcCircuitType |
|
|
rbnFrameRelayPvcCircuitHandle |
RbnCircuitHandle |
|
|
rbnFrameRelayPvcClearCircuit |
TruthValue |
|
RbnDot1qPvcOnEthConfigEntry |
|
SEQUENCE |
|
|
|
|
rbnDot1qPvcOnEthSlot |
RbnSlot |
|
|
rbnDot1qPvcOnEthPort |
RbnPort |
|
|
rbnDot1qPvcOnEthVlanId |
RbnVidOrUntagged |
|
|
rbnDot1qPvcOnEthRowStatus |
RowStatus |
|
|
rbnDot1qPvcOnEthProfileName |
SnmpAdminString |
|
|
rbnDot1qPvcOnEthEncapsulation |
RbnDot1qEncapsulation |
|
|
rbnDot1qPvcOnEthCircuitType |
RbnPvcCircuitType |
|
|
rbnDot1qPvcOnEthCircuitHandle |
RbnCircuitHandle |
|
|
rbnDot1qPvcOnEthClearCircuit |
TruthValue |
|
RbnDot1qPvcOnAtmConfigEntry |
|
SEQUENCE |
|
|
|
|
rbnDot1qPvcOnAtmSlot |
RbnSlot |
|
|
rbnDot1qPvcOnAtmPort |
RbnPort |
|
|
rbnDot1qPvcOnAtmVpi |
Unsigned32 |
|
|
rbnDot1qPvcOnAtmVci |
Unsigned32 |
|
|
rbnDot1qPvcOnAtmVlanId |
RbnVidOrUntagged |
|
|
rbnDot1qPvcOnAtmRowStatus |
RowStatus |
|
|
rbnDot1qPvcOnAtmProfileName |
SnmpAdminString |
|
|
rbnDot1qPvcOnAtmEncapsulation |
RbnDot1qEncapsulation |
|
|
rbnDot1qPvcOnAtmCircuitType |
RbnPvcCircuitType |
|
|
rbnDot1qPvcOnAtmCircuitHandle |
RbnCircuitHandle |
|
|
rbnDot1qPvcOnAtmClearCircuit |
TruthValue |
|
RbnDot1qPvcOnFrConfigEntry |
|
SEQUENCE |
|
|
|
|
rbnDot1qPvcOnFrSlot |
RbnSlot |
|
|
rbnDot1qPvcOnFrPort |
RbnPort |
|
|
rbnDot1qPvcOnFrChannel |
Unsigned32 |
|
|
rbnDot1qPvcOnFrDLCI |
Unsigned32 |
|
|
rbnDot1qPvcOnFrVlanId |
RbnVidOrUntagged |
|
|
rbnDot1qPvcOnFrRowStatus |
RowStatus |
|
|
rbnDot1qPvcOnFrProfileName |
SnmpAdminString |
|
|
rbnDot1qPvcOnFrEncapsulation |
RbnDot1qEncapsulation |
|
|
rbnDot1qPvcOnFrCircuitType |
RbnPvcCircuitType |
|
|
rbnDot1qPvcOnFrCircuitHandle |
RbnCircuitHandle |
|
|
rbnDot1qPvcOnFrClearCircuit |
TruthValue |
|
Defined Values
rbnPvcMib |
1.3.6.1.4.1.2352.2.7 |
Defines the objects necessary to support the management of
ATM, Frame Relay and IEEE 802.1Q permanent virtual circuits
(PVC). |
MODULE-IDENTITY |
|
|
|
rbnAtmPvcConfigTable |
1.3.6.1.4.1.2352.2.7.1.1 |
This table contains the objects which identify and configure
ATM PVCs. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
RbnAtmPvcConfigEntry |
|
rbnAtmPvcConfigEntry |
1.3.6.1.4.1.2352.2.7.1.1.1 |
A conceptual row in the rbnAtmPvcConfigTable. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
RbnAtmPvcConfigEntry |
|
|
rbnAtmPvcSlot |
1.3.6.1.4.1.2352.2.7.1.1.1.1 |
The chassis slot number |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
RbnSlot |
|
|
rbnAtmPvcPort |
1.3.6.1.4.1.2352.2.7.1.1.1.2 |
The port number |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
RbnPort |
|
|
rbnAtmPvcVpi |
1.3.6.1.4.1.2352.2.7.1.1.1.3 |
The Virtual Path Identifier for the PVC. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
0..255 |
|
rbnAtmPvcVci |
1.3.6.1.4.1.2352.2.7.1.1.1.4 |
The Virtual Channel Identifier for the PVC. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
0..65535 |
|
rbnAtmPvcRowStatus |
1.3.6.1.4.1.2352.2.7.1.1.1.8 |
The row status for creating, modifying, or deleting an entry
in the table. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
RowStatus |
|
|
rbnAtmPvcCircuitType |
1.3.6.1.4.1.2352.2.7.1.1.1.9 |
The PVC circuit type. With respect to this mib
object, only those entries whose rbnAtmPvcCircuitType
has a value 'explicit' may be removed by setting
rbnAtmPvcRowStatus equal to 'destroy'. A set
operation with rbnAtmPvcRowStatus equal to 'destroy'
on any row with rbnAtmPvcCircuitType not equal to
'explicit' will result in an INCONSISTENT_VALUE_ERROR. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
RbnPvcCircuitType |
|
|
rbnAtmPvcCircuitHandle |
1.3.6.1.4.1.2352.2.7.1.1.1.10 |
This object is used internally to uniquely identify
a circuit. The value of this object may be used to
correlate entries with those in the rbnBindTable defined
in the RBN-BIND-MIB. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
RbnCircuitHandle |
|
|
rbnAtmPvcClearCircuit |
1.3.6.1.4.1.2352.2.7.1.1.1.11 |
When this object is true(1), the system will clear active
subscriber sessions on the specified circuit. When false(2),
there is no action taken. This object can only be written
when the conceptual row exists.
When this object is set to true(1) and the encapsulation
of the circuit is bridged or routed, e.g. bridge1483(2) or
route1483(4), subscribers will re-authenticate after
being cleared. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
TruthValue |
|
|
rbnFrameRelayPvcConfigEntry |
1.3.6.1.4.1.2352.2.7.1.2.1 |
A conceptual row in the rbnFrameRelayPvcConfigTable. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
RbnFrameRelayPvcConfigEntry |
|
|
rbnFrameRelayPvcDLCI |
1.3.6.1.4.1.2352.2.7.1.2.1.4 |
The Data Link Connection Identifier |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
0..65535 |
|
rbnFrameRelayPvcRowStatus |
1.3.6.1.4.1.2352.2.7.1.2.1.8 |
The row status for creating, modifying, or deleting an entry
in the table. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
RowStatus |
|
|
rbnFrameRelayPvcCircuitType |
1.3.6.1.4.1.2352.2.7.1.2.1.9 |
The PVC circuit type. With respect to this mib
object, only those entries whose rbnFrameRelayPvcCircuitType
has a value 'explicit' may be removed by setting
rbnFrameRelayPvcRowStatus equal to 'destroy'. A set
operation with rbnFrameRelayPvcRowStatus equal to 'destroy'
on any row with rbnFrameRelayPvcCircuitType not equal to
'explicit' will result in an INCONSISTENT_VALUE_ERROR. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
RbnPvcCircuitType |
|
|
rbnFrameRelayPvcCircuitHandle |
1.3.6.1.4.1.2352.2.7.1.2.1.10 |
This object is used internally to uniquely identify
a circuit. The value of this object may be used to
correlate entries with those in the rbnBindTable defined
in the RBN-BIND-MIB. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
RbnCircuitHandle |
|
|
rbnFrameRelayPvcClearCircuit |
1.3.6.1.4.1.2352.2.7.1.2.1.11 |
When this object is true(1), the system will clear active
subscriber sessions on the specified circuit. When false(2),
there is no action taken. This object can only be written
when the conceptual row exists.
When this object is set to true(1) and the encapsulation
of the circuit is bridged or routed, e.g. bridge1490(2) or
route1490(4), subscribers will re-authenticate after
being cleared. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
TruthValue |
|
|
rbnDot1qPvcOnEthConfigEntry |
1.3.6.1.4.1.2352.2.7.1.3.1 |
A conceptual row in the rbnDot1qPvcOnEthConfigTable. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
RbnDot1qPvcOnEthConfigEntry |
|
|
rbnDot1qPvcOnEthRowStatus |
1.3.6.1.4.1.2352.2.7.1.3.1.4 |
The row status for creating, modifying, or deleting an entry
in the table. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
RowStatus |
|
|
rbnDot1qPvcOnEthCircuitType |
1.3.6.1.4.1.2352.2.7.1.3.1.7 |
The PVC circuit type. With respect to this mib object,
only those entries whose rbnDot1qPvcOnEthCircuitType
has a value 'explicit' may be removed by setting
rbnDot1qPvcOnEthRowStatus equal to 'destroy'. A set
operation with rbnDot1qPvcOnEthRowStatus equal to 'destroy'
on any row with rbnDot1qPvcOnEthCircuitType not equal to
'explicit' will result in an INCONSISTENT_VALUE_ERROR. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
RbnPvcCircuitType |
|
|
rbnDot1qPvcOnEthCircuitHandle |
1.3.6.1.4.1.2352.2.7.1.3.1.8 |
This object is used internally to uniquely identify
a circuit. The value of this object may be used to
correlate entries with those in the rbnBindTable defined
in the RBN-BIND-MIB. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
RbnCircuitHandle |
|
|
rbnDot1qPvcOnEthClearCircuit |
1.3.6.1.4.1.2352.2.7.1.3.1.9 |
When this object is true(1), the system will clear active
subscriber sessions on the specified circuit. When false(2),
there is no action taken. This object can only be written
when the conceptual row exists. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
TruthValue |
|
|
rbnDot1qPvcOnAtmConfigEntry |
1.3.6.1.4.1.2352.2.7.1.4.1 |
A conceptual row in the rbnDot1qPvcOnAtmConfigTable. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
RbnDot1qPvcOnAtmConfigEntry |
|
|
rbnDot1qPvcOnAtmVpi |
1.3.6.1.4.1.2352.2.7.1.4.1.3 |
The Virtual Path Identifier for the PVC. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
0..255 |
|
rbnDot1qPvcOnAtmVci |
1.3.6.1.4.1.2352.2.7.1.4.1.4 |
The Virtual Channel Identifier for the PVC. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
0..65535 |
|
rbnDot1qPvcOnAtmRowStatus |
1.3.6.1.4.1.2352.2.7.1.4.1.6 |
The row status for creating, modifying, or deleting an entry
in the table. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
RowStatus |
|
|
rbnDot1qPvcOnAtmCircuitType |
1.3.6.1.4.1.2352.2.7.1.4.1.9 |
The PVC circuit type. With respect to this mib object,
only those entries whose rbnDot1qPvcOnAtmCircuitType
has a value 'explicit' may be removed by setting
rbnDot1qPvcOnAtmRowStatus equal to 'destroy'. A set
operation with rbnDot1qPvcOnAtmRowStatus equal to 'destroy'
on any row with rbnDot1qPvcOnAtmCircuitType not equal to
'explicit' will result in an INCONSISTENT_VALUE_ERROR. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
RbnPvcCircuitType |
|
|
rbnDot1qPvcOnAtmCircuitHandle |
1.3.6.1.4.1.2352.2.7.1.4.1.10 |
This object is used internally to uniquely identify
a circuit. The value of this object may be used to
correlate entries with those in the rbnBindTable defined
in the RBN-BIND-MIB. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
RbnCircuitHandle |
|
|
rbnDot1qPvcOnAtmClearCircuit |
1.3.6.1.4.1.2352.2.7.1.4.1.11 |
When this object is true(1), the system will clear active
subscriber sessions on the specified circuit. When false(2),
there is no action taken. This object can only be written
when the conceptual row exists. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
TruthValue |
|
|
rbnDot1qPvcOnFrConfigEntry |
1.3.6.1.4.1.2352.2.7.1.5.1 |
A conceptual row in the rbnDot1qPvcOnFrConfigTable. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
RbnDot1qPvcOnFrConfigEntry |
|
|
rbnDot1qPvcOnFrSlot |
1.3.6.1.4.1.2352.2.7.1.5.1.1 |
The chassis slot number. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
RbnSlot |
|
|
rbnDot1qPvcOnFrDLCI |
1.3.6.1.4.1.2352.2.7.1.5.1.4 |
The Data Link Connection Identifier. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
0..65535 |
|
rbnDot1qPvcOnFrRowStatus |
1.3.6.1.4.1.2352.2.7.1.5.1.6 |
The row status for creating, modifying, or deleting an entry
in the table. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
RowStatus |
|
|
rbnDot1qPvcOnFrCircuitType |
1.3.6.1.4.1.2352.2.7.1.5.1.9 |
The PVC circuit type. With respect to this mib object,
only those entries whose rbnDot1qPvcOnFrCircuitType
has a value 'explicit' may be removed by setting
rbnDot1qPvcOnFrRowStatus equal to 'destroy'. A set
operation with rbnDot1qPvcOnFrRowStatus equal to 'destroy'
on any row with rbnDot1qPvcOnFrCircuitType not equal to
'explicit' will result in an INCONSISTENT_VALUE_ERROR. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
RbnPvcCircuitType |
|
|
rbnDot1qPvcOnFrCircuitHandle |
1.3.6.1.4.1.2352.2.7.1.5.1.10 |
This object is used internally to uniquely identify
a circuit. The value of this object may be used to
correlate entries with those in the rbnBindTable defined
in the RBN-BIND-MIB. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
RbnCircuitHandle |
|
|
rbnDot1qPvcOnFrClearCircuit |
1.3.6.1.4.1.2352.2.7.1.5.1.11 |
When this object is true(1), the system will clear active
subscriber sessions on the specified circuit. When false(2),
there is no action taken. This object can only be written
when the conceptual row exists. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
TruthValue |
|
|
rbnPvcCompliance |
1.3.6.1.4.1.2352.2.7.2.1.1 |
The compliance statement for SNMP entities which implement
the RBN-PVC-MIB. |
Status: deprecated |
Access: read-create |
MODULE-COMPLIANCE |
|
|
|
rbnPvcCompliance2 |
1.3.6.1.4.1.2352.2.7.2.1.2 |
The compliance statement for SNMP entities which implement
the RBN-PVC-MIB. |
Status: deprecated |
Access: read-create |
MODULE-COMPLIANCE |
|
|
|
rbnPvcCompliance3 |
1.3.6.1.4.1.2352.2.7.2.1.3 |
The compliance statement for SNMP entities which implement
the RBN-PVC-MIB. |
Status: current |
Access: read-create |
MODULE-COMPLIANCE |
|
|
|
rbnAtmPvcGroup |
1.3.6.1.4.1.2352.2.7.2.2.1 |
the collection of objects which represent the ATM PVC. |
Status: deprecated |
Access: read-create |
OBJECT-GROUP |
|
|
|
rbnFrameRelayPvcGroup |
1.3.6.1.4.1.2352.2.7.2.2.2 |
the collection of objects which represent the FrameRelay PVC. |
Status: deprecated |
Access: read-create |
OBJECT-GROUP |
|
|
|
rbnAtmPvcGroup2 |
1.3.6.1.4.1.2352.2.7.2.2.3 |
The collection of objects which represent the ATM PVC. |
Status: current |
Access: read-create |
OBJECT-GROUP |
|
|
|
rbnFrameRelayPvcGroup2 |
1.3.6.1.4.1.2352.2.7.2.2.4 |
The collection of objects which represent the FrameRelay PVC. |
Status: current |
Access: read-create |
OBJECT-GROUP |
|
|
|
rbnDot1qPvcOnEthGroup |
1.3.6.1.4.1.2352.2.7.2.2.5 |
A collection of objects providing information specific
to IEEE 802.1Q PVCs on Ethernet ports. |
Status: current |
Access: read-create |
OBJECT-GROUP |
|
|
|
rbnDot1qPvcOnAtmGroup |
1.3.6.1.4.1.2352.2.7.2.2.6 |
A collection of objects providing information specific
to IEEE 802.1Q PVCs on ATM circuits. |
Status: current |
Access: read-create |
OBJECT-GROUP |
|
|
|
rbnDot1qPvcOnFrGroup |
1.3.6.1.4.1.2352.2.7.2.2.7 |
A collection of objects providing information specific
to IEEE 802.1Q PVCs on Frame Relay circuits. |
Status: current |
Access: read-create |
OBJECT-GROUP |
|
|
|