RADLAN-OSPFV3-LSDB-MIB

File: RADLAN-OSPFV3-LSDB-MIB.mib (53699 bytes)

Imported modules

SNMPv2-SMI	SNMPv2-TC	INET-ADDRESS-MIB
RADLAN-OSPFV3-MIB	RADLAN-OSPF-MIB	OSPF-MIB
RADLAN-MIB	RFC1213-MIB

Imported symbols

MODULE-IDENTITY	OBJECT-TYPE	Counter32
Gauge32	Integer32	Unsigned32
IpAddress	TEXTUAL-CONVENTION	TruthValue
RowStatus	TimeStamp	InetAddressType
InetAddress	InetAddressPrefixLength	InetAddressIPv6
rlOspfv3	RlOspfProcessID	AreaID
RouterID	rnd	mib-2

Defined Types

RlOspfv3RouterLsaEntry
SEQUENCE
	rlOspfv3RouterLsaProcessId	RlOspfProcessID
	rlOspfv3RouterLsaAreaId	AreaID
	rlOspfv3RouterLsaLsid	IpAddress
	rlOspfv3RouterLsaRouterId	RouterID
	rlOspfv3RouterLsaIdx	Unsigned32
	rlOspfv3RouterLsaCount	Unsigned32
	rlOspfv3RouterLsaSequence	Integer32
	rlOspfv3RouterLsaAge	Integer32
	rlOspfv3RouterLsaChecksum	Integer32
	rlOspfv3RouterLsaLength	Unsigned32
	rlOspfv3RouterLsaBitW	INTEGER
	rlOspfv3RouterLsaBitV	INTEGER
	rlOspfv3RouterLsaBitE	INTEGER
	rlOspfv3RouterLsaBitB	INTEGER
	rlOspfv3RouterLsaOptions	Unsigned32
	rlOspfv3RouterLsaType	INTEGER
	rlOspfv3RouterLsaMetric	Unsigned32
	rlOspfv3RouterLsaInterfaceID	Unsigned32
	rlOspfv3RouterLsaNeighborInterfaceID	Unsigned32
	rlOspfv3RouterLsaNeighborRouterID	RouterID

RlOspfv3NetworkLsaEntry
SEQUENCE
	rlOspfv3NetworkLsaProcessId	RlOspfProcessID
	rlOspfv3NetworkLsaAreaId	AreaID
	rlOspfv3NetworkLsaLsid	IpAddress
	rlOspfv3NetworkLsaRouterId	RouterID
	rlOspfv3NetworkLsaIdx	Unsigned32
	rlOspfv3NetworkLsaCount	Unsigned32
	rlOspfv3NetworkLsaSequence	Integer32
	rlOspfv3NetworkLsaAge	Integer32
	rlOspfv3NetworkLsaChecksum	Integer32
	rlOspfv3NetworkLsaLength	Unsigned32
	rlOspfv3NetworkLsaOptions	Unsigned32
	rlOspfv3NetworkLsaAttRouter	RouterID

RlOspfv3InterAreaPrefixLsaEntry
SEQUENCE
	rlOspfv3InterAreaPrefixLsaProcessId	RlOspfProcessID
	rlOspfv3InterAreaPrefixLsaAreaId	AreaID
	rlOspfv3InterAreaPrefixLsaLsid	IpAddress
	rlOspfv3InterAreaPrefixLsaRouterId	RouterID
	rlOspfv3InterAreaPrefixLsaSequence	Integer32
	rlOspfv3InterAreaPrefixLsaAge	Integer32
	rlOspfv3InterAreaPrefixLsaChecksum	Integer32
	rlOspfv3InterAreaPrefixLsaLength	Unsigned32
	rlOspfv3InterAreaPrefixLsaMetric	Unsigned32
	rlOspfv3InterAreaPrefixLsaPrefixLength	Unsigned32
	rlOspfv3InterAreaPrefixLsaPrefixOptions	Unsigned32
	rlOspfv3InterAreaPrefixLsaAddressPrefix	InetAddress

RlOspfv3InterAreaRouterLsaEntry
SEQUENCE
	rlOspfv3InterAreaRouterLsaProcessId	RlOspfProcessID
	rlOspfv3InterAreaRouterLsaAreaId	AreaID
	rlOspfv3InterAreaRouterLsaLsid	IpAddress
	rlOspfv3InterAreaRouterLsaRouterId	RouterID
	rlOspfv3InterAreaRouterLsaSequence	Integer32
	rlOspfv3InterAreaRouterLsaAge	Integer32
	rlOspfv3InterAreaRouterLsaChecksum	Integer32
	rlOspfv3InterAreaRouterLsaLength	Unsigned32
	rlOspfv3InterAreaRouterLsaOptions	Unsigned32
	rlOspfv3InterAreaRouterLsaMetric	Unsigned32
	rlOspfv3InterAreaRouterLsaDestinationRouterId	RouterID

RlOspfv3AsExternalLsaEntry
SEQUENCE
	rlOspfv3AsExternalLsaProcessId	RlOspfProcessID
	rlOspfv3AsExternalLsaAreaId	AreaID
	rlOspfv3AsExternalLsaLsid	IpAddress
	rlOspfv3AsExternalLsaRouterId	RouterID
	rlOspfv3AsExternalLsaSequence	Integer32
	rlOspfv3AsExternalLsaAge	Integer32
	rlOspfv3AsExternalLsaChecksum	Integer32
	rlOspfv3AsExternalLsaLength	Unsigned32
	rlOspfv3AsExternalLsaBitE	INTEGER
	rlOspfv3AsExternalLsaBitF	INTEGER
	rlOspfv3AsExternalLsaBitT	INTEGER
	rlOspfv3AsExternalLsaMetric	Unsigned32
	rlOspfv3AsExternalLsaReferencedLsType	Unsigned32
	rlOspfv3AsExternalLsaPrefixLength	Unsigned32
	rlOspfv3AsExternalLsaPrefixOptions	Unsigned32
	rlOspfv3AsExternalLsaAddressPrefix	InetAddress
	rlOspfv3AsExternalLsaForwardingAddress	InetAddress
	rlOspfv3AsExternalLsaExternalRouteTag	Unsigned32
	rlOspfv3AsExternalLsaReferencedLinkStateId	Unsigned32

RlOspfv3LinkLsaEntry
SEQUENCE
	rlOspfv3LinkLsaProcessId	RlOspfProcessID
	rlOspfv3LinkLsaIfIndex	Unsigned32
	rlOspfv3LinkLsaIfInstId	Integer32
	rlOspfv3LinkLsaLsid	IpAddress
	rlOspfv3LinkLsaRouterId	RouterID
	rlOspfv3LinkLsaIdx	Unsigned32
	rlOspfv3LinkLsaCount	Unsigned32
	rlOspfv3LinkLsaSequence	Integer32
	rlOspfv3LinkLsaAge	Integer32
	rlOspfv3LinkLsaChecksum	Integer32
	rlOspfv3LinkLsaLength	Unsigned32
	rlOspfv3LinkLsaRtrPri	Unsigned32
	rlOspfv3LinkLsaOptions	Unsigned32
	rlOspfv3LinkLsaLinkLocalInterfaceAddress	InetAddress
	rlOspfv3LinkLsaPrefixLength	Unsigned32
	rlOspfv3LinkLsaPrefixOptions	Unsigned32
	rlOspfv3LinkLsaAddressPrefix	InetAddress

RlOspfv3IntraAreaPrefixLsaEntry
SEQUENCE
	rlOspfv3IntraAreaPrefixLsaProcessId	RlOspfProcessID
	rlOspfv3IntraAreaPrefixLsaAreaId	AreaID
	rlOspfv3IntraAreaPrefixLsaLsid	IpAddress
	rlOspfv3IntraAreaPrefixLsaRouterId	RouterID
	rlOspfv3IntraAreaPrefixLsaIdx	Unsigned32
	rlOspfv3IntraAreaPrefixLsaCount	Unsigned32
	rlOspfv3IntraAreaPrefixLsaSequence	Integer32
	rlOspfv3IntraAreaPrefixLsaAge	Integer32
	rlOspfv3IntraAreaPrefixLsaChecksum	Integer32
	rlOspfv3IntraAreaPrefixLsaLength	Unsigned32
	rlOspfv3IntraAreaPrefixLsaNumPrefixes	Unsigned32
	rlOspfv3IntraAreaPrefixLsaReferenceLsType	Unsigned32
	rlOspfv3IntraAreaPrefixLsaReferenceLsId	Unsigned32
	rlOspfv3IntraAreaPrefixLsaReferenceAdvRouter	Unsigned32
	rlOspfv3IntraAreaPrefixLsaMetric	Unsigned32
	rlOspfv3IntraAreaPrefixLsaPrefixLength	Unsigned32
	rlOspfv3IntraAreaPrefixLsaPrefixOptions	Unsigned32
	rlOspfv3IntraAreaPrefixLsaAddressPrefix	InetAddress

Defined Values

rlOspfv3Lsdb		1.3.6.1.4.1.89.222
The private MIB module definition for OSPF LSA Database MIB.
MODULE-IDENTITY

rlOspfv3RouterLsaTable		1.3.6.1.4.1.89.222.1
Router Link State Advertisement.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		RlOspfv3RouterLsaEntry

rlOspfv3RouterLsaEntry		1.3.6.1.4.1.89.222.1.1
A single entry from Router LSA.
Status: current	Access: not-accessible
OBJECT-TYPE
	RlOspfv3RouterLsaEntry

rlOspfv3RouterLsaProcessId		1.3.6.1.4.1.89.222.1.1.1
A 32-bit integer uniquely identifying an OSPFv3 process.
Status: current	Access: read-only
OBJECT-TYPE
	RlOspfProcessID

rlOspfv3RouterLsaAreaId		1.3.6.1.4.1.89.222.1.1.2
The 32 bit identifier of the Area from which the LSA was received.
Status: current	Access: read-only
OBJECT-TYPE
	AreaID

rlOspfv3RouterLsaLsid		1.3.6.1.4.1.89.222.1.1.3
The Link State ID is an LS Type Specific field containing either a Router ID or an IP Address; it identifies the piece of the routing domain that is being described by the advertisement.
Status: current	Access: read-only
OBJECT-TYPE
	IpAddress

rlOspfv3RouterLsaRouterId		1.3.6.1.4.1.89.222.1.1.4
The 32 bit number that uniquely identifies the originating router in the Autonomous System.
Status: current	Access: read-only
OBJECT-TYPE
	RouterID

rlOspfv3RouterLsaIdx		1.3.6.1.4.1.89.222.1.1.5
The index is a unsigned 32-bit integer. It is used as sequence number of entry in the LSA and relevant only for Router or Network LSA which can contain unlimited number of entries.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	1..65535

rlOspfv3RouterLsaCount		1.3.6.1.4.1.89.222.1.1.6
Number of entries containg is the LSA.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	1..65535

rlOspfv3RouterLsaSequence		1.3.6.1.4.1.89.222.1.1.7
The sequence number field is a signed 32-bit integer. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number the more recent the advertisement.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

rlOspfv3RouterLsaAge		1.3.6.1.4.1.89.222.1.1.8
This field is the age of the link state advertisement in seconds.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

rlOspfv3RouterLsaChecksum		1.3.6.1.4.1.89.222.1.1.9
This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connectionless datagrams; it is commonly referred to as the Fletcher checksum.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

rlOspfv3RouterLsaLength		1.3.6.1.4.1.89.222.1.1.10
The lenth in bytes of the LSA. This includes the 20 byte LSA header.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

rlOspfv3RouterLsaBitW		1.3.6.1.4.1.89.222.1.1.11
When set, the router is a wild-card multicast receiver. When running MOSPF, these routers receive all multicast datagrams, regardless of destination.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	off(1), on(2)

rlOspfv3RouterLsaBitV		1.3.6.1.4.1.89.222.1.1.12
When set, the router is an endpoint of one or more fully adjacent virtual links having the described area as Transit area (V is for virtual link endpoint).
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	off(1), on(2)

rlOspfv3RouterLsaBitE		1.3.6.1.4.1.89.222.1.1.13
When set, the router is an AS boundary router (E is for external).
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	off(1), on(2)

rlOspfv3RouterLsaBitB		1.3.6.1.4.1.89.222.1.1.14
When set, the router is an area border router (B is for border).
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	off(1), on(2)

rlOspfv3RouterLsaOptions		1.3.6.1.4.1.89.222.1.1.15
The optional capabilities supported by the router. Through this mechanism routers of differing capabilities can be mixed within an OSPF routing domain.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

rlOspfv3RouterLsaType		1.3.6.1.4.1.89.222.1.1.16
A quick description of the router link.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	pointToPoint(1), transitNetwork(2), stubNetwork(3), virtualLink(4)

rlOspfv3RouterLsaMetric		1.3.6.1.4.1.89.222.1.1.17
The cost of using this router link.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

rlOspfv3RouterLsaInterfaceID		1.3.6.1.4.1.89.222.1.1.18
The Interface ID assigned to the interface being described.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

rlOspfv3RouterLsaNeighborInterfaceID		1.3.6.1.4.1.89.222.1.1.19
The Interface ID the neighbor router (or the attached link's Designated Router, for Type 2 interfaces) has been advertising in hello packets sent on the attached link.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

rlOspfv3RouterLsaNeighborRouterID		1.3.6.1.4.1.89.222.1.1.20
The Router ID the neighbor router (or the attached link's Designated Router, for Type 2 interfaces).
Status: current	Access: read-only
OBJECT-TYPE
	RouterID

rlOspfv3NetworkLsaTable		1.3.6.1.4.1.89.222.2
Network Link State Advertisement.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		RlOspfv3NetworkLsaEntry

rlOspfv3NetworkLsaEntry		1.3.6.1.4.1.89.222.2.1
A single entry from Network LSA.
Status: current	Access: not-accessible
OBJECT-TYPE
	RlOspfv3NetworkLsaEntry

rlOspfv3NetworkLsaProcessId		1.3.6.1.4.1.89.222.2.1.1
A 32-bit integer uniquely identifying an OSPFv3 process.
Status: current	Access: read-only
OBJECT-TYPE
	RlOspfProcessID

rlOspfv3NetworkLsaAreaId		1.3.6.1.4.1.89.222.2.1.2
The 32 bit identifier of the Area from which the LSA was received.
Status: current	Access: read-only
OBJECT-TYPE
	AreaID

rlOspfv3NetworkLsaLsid		1.3.6.1.4.1.89.222.2.1.3
The Link State ID is an LS Type Specific field containing either a Router ID or an IP Address; it identifies the piece of the routing domain that is being described by the advertisement.
Status: current	Access: read-only
OBJECT-TYPE
	IpAddress

rlOspfv3NetworkLsaRouterId		1.3.6.1.4.1.89.222.2.1.4
The 32 bit number that uniquely identifies the originating router in the Autonomous System.
Status: current	Access: read-only
OBJECT-TYPE
	RouterID

rlOspfv3NetworkLsaIdx		1.3.6.1.4.1.89.222.2.1.5
The index is a unsigned 32-bit integer. It is used as sequence number of entry in the LSA and relevant only for Router or Network LSA which can contain unlimited number of entries.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	1..65535

rlOspfv3NetworkLsaCount		1.3.6.1.4.1.89.222.2.1.6
Number of entries containg is the LSA.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	1..65535

rlOspfv3NetworkLsaSequence		1.3.6.1.4.1.89.222.2.1.7
The sequence number field is a signed 32-bit integer. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number the more recent the advertisement.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

rlOspfv3NetworkLsaAge		1.3.6.1.4.1.89.222.2.1.8
This field is the age of the link state advertisement in seconds.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

rlOspfv3NetworkLsaChecksum		1.3.6.1.4.1.89.222.2.1.9
This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connectionless datagrams; it is commonly referred to as the Fletcher checksum.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

rlOspfv3NetworkLsaLength		1.3.6.1.4.1.89.222.2.1.10
The lenth in bytes of the LSA. This includes the 20 byte LSA header.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

rlOspfv3NetworkLsaOptions		1.3.6.1.4.1.89.222.2.1.11
The optional capabilities supported by the router. Through this mechanism routers of differing capabilities can be mixed within an OSPF routing domain.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

rlOspfv3NetworkLsaAttRouter		1.3.6.1.4.1.89.222.2.1.12
The Router IDs of each of the routers attached to the link.
Status: current	Access: read-only
OBJECT-TYPE
	RouterID

rlOspfv3InterAreaPrefixLsaTable		1.3.6.1.4.1.89.222.3
Inter Area Prefix Link State Advertisement.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		RlOspfv3InterAreaPrefixLsaEntry

rlOspfv3InterAreaPrefixLsaEntry		1.3.6.1.4.1.89.222.3.1
A single entry from Network LSA.
Status: current	Access: not-accessible
OBJECT-TYPE
	RlOspfv3InterAreaPrefixLsaEntry

rlOspfv3InterAreaPrefixLsaProcessId		1.3.6.1.4.1.89.222.3.1.1
A 32-bit integer uniquely identifying an OSPFv3 process.
Status: current	Access: read-only
OBJECT-TYPE
	RlOspfProcessID

rlOspfv3InterAreaPrefixLsaAreaId		1.3.6.1.4.1.89.222.3.1.2
The 32 bit identifier of the Area from which the LSA was received.
Status: current	Access: read-only
OBJECT-TYPE
	AreaID

rlOspfv3InterAreaPrefixLsaLsid		1.3.6.1.4.1.89.222.3.1.3
The Link State ID is an LS Type Specific field containing either a Router ID or an IP Address; it identifies the piece of the routing domain that is being described by the advertisement.
Status: current	Access: read-only
OBJECT-TYPE
	IpAddress

rlOspfv3InterAreaPrefixLsaRouterId		1.3.6.1.4.1.89.222.3.1.4
The 32 bit number that uniquely identifies the originating router in the Autonomous System.
Status: current	Access: read-only
OBJECT-TYPE
	RouterID

rlOspfv3InterAreaPrefixLsaSequence		1.3.6.1.4.1.89.222.3.1.5
The sequence number field is a signed 32-bit integer. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number the more recent the advertisement.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

rlOspfv3InterAreaPrefixLsaAge		1.3.6.1.4.1.89.222.3.1.6
This field is the age of the link state advertisement in seconds.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

rlOspfv3InterAreaPrefixLsaChecksum		1.3.6.1.4.1.89.222.3.1.7
This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connectionless datagrams; it is commonly referred to as the Fletcher checksum.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

rlOspfv3InterAreaPrefixLsaLength		1.3.6.1.4.1.89.222.3.1.8
The lenth in bytes of the LSA. This includes the 20 byte LSA header.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

rlOspfv3InterAreaPrefixLsaMetric		1.3.6.1.4.1.89.222.3.1.9
The cost of this route. Expressed in the same units as the interface costs in the router-LSAs.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

rlOspfv3InterAreaPrefixLsaPrefixLength		1.3.6.1.4.1.89.222.3.1.10
IPv6 address prefix length.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

rlOspfv3InterAreaPrefixLsaPrefixOptions		1.3.6.1.4.1.89.222.3.1.11
IPv6 address prefix options.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

rlOspfv3InterAreaPrefixLsaAddressPrefix		1.3.6.1.4.1.89.222.3.1.12
IPv6 address prefix - bit strings of length 128.
Status: current	Access: read-only
OBJECT-TYPE
	InetAddress

rlOspfv3InterAreaRouterLsaTable		1.3.6.1.4.1.89.222.4
Inter Area Router Link State Advertisement.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		RlOspfv3InterAreaRouterLsaEntry

rlOspfv3InterAreaRouterLsaEntry		1.3.6.1.4.1.89.222.4.1
A single entry from Network LSA.
Status: current	Access: not-accessible
OBJECT-TYPE
	RlOspfv3InterAreaRouterLsaEntry

rlOspfv3InterAreaRouterLsaProcessId		1.3.6.1.4.1.89.222.4.1.1
A 32-bit integer uniquely identifying an OSPFv3 process.
Status: current	Access: read-only
OBJECT-TYPE
	RlOspfProcessID

rlOspfv3InterAreaRouterLsaAreaId		1.3.6.1.4.1.89.222.4.1.2
The 32 bit identifier of the Area from which the LSA was received.
Status: current	Access: read-only
OBJECT-TYPE
	AreaID

rlOspfv3InterAreaRouterLsaLsid		1.3.6.1.4.1.89.222.4.1.3
The Link State ID is an LS Type Specific field containing either a Router ID or an IP Address; it identifies the piece of the routing domain that is being described by the advertisement.
Status: current	Access: read-only
OBJECT-TYPE
	IpAddress

rlOspfv3InterAreaRouterLsaRouterId		1.3.6.1.4.1.89.222.4.1.4
The 32 bit number that uniquely identifies the originating router in the Autonomous System.
Status: current	Access: read-only
OBJECT-TYPE
	RouterID

rlOspfv3InterAreaRouterLsaSequence		1.3.6.1.4.1.89.222.4.1.5
The sequence number field is a signed 32-bit integer. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number the more recent the advertisement.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

rlOspfv3InterAreaRouterLsaAge		1.3.6.1.4.1.89.222.4.1.6
This field is the age of the link state advertisement in seconds.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

rlOspfv3InterAreaRouterLsaChecksum		1.3.6.1.4.1.89.222.4.1.7
This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connectionless datagrams; it is commonly referred to as the Fletcher checksum.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

rlOspfv3InterAreaRouterLsaLength		1.3.6.1.4.1.89.222.4.1.8
The lenth in bytes of the LSA. This includes the 20 byte LSA header.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

rlOspfv3InterAreaRouterLsaOptions		1.3.6.1.4.1.89.222.4.1.9
The optional capabilities supported by the router. Through this mechanism routers of differing capabilities can be mixed within an OSPF routing domain.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

rlOspfv3InterAreaRouterLsaMetric		1.3.6.1.4.1.89.222.4.1.10
The cost of this route. Expressed in the same units as the interface costs in the router-LSAs.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

rlOspfv3InterAreaRouterLsaDestinationRouterId		1.3.6.1.4.1.89.222.4.1.11
The Router ID of the router being described by the LSA.
Status: current	Access: read-only
OBJECT-TYPE
	RouterID

rlOspfv3AsExternalLsaTable		1.3.6.1.4.1.89.222.5
AS External Link State Advertisement.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		RlOspfv3AsExternalLsaEntry

rlOspfv3AsExternalLsaEntry		1.3.6.1.4.1.89.222.5.1
A single entry from Router LSA.
Status: current	Access: not-accessible
OBJECT-TYPE
	RlOspfv3AsExternalLsaEntry

rlOspfv3AsExternalLsaProcessId		1.3.6.1.4.1.89.222.5.1.1
A 32-bit integer uniquely identifying an OSPFv3 process.
Status: current	Access: read-only
OBJECT-TYPE
	RlOspfProcessID

rlOspfv3AsExternalLsaAreaId		1.3.6.1.4.1.89.222.5.1.2
The 32 bit identifier of the Area from which the LSA was received.
Status: current	Access: read-only
OBJECT-TYPE
	AreaID

rlOspfv3AsExternalLsaLsid		1.3.6.1.4.1.89.222.5.1.3
The Link State ID is an LS Type Specific field containing either a Router ID or an IP Address; it identifies the piece of the routing domain that is being described by the advertisement.
Status: current	Access: read-only
OBJECT-TYPE
	IpAddress

rlOspfv3AsExternalLsaRouterId		1.3.6.1.4.1.89.222.5.1.4
The 32 bit number that uniquely identifies the originating router in the Autonomous System.
Status: current	Access: read-only
OBJECT-TYPE
	RouterID

rlOspfv3AsExternalLsaSequence		1.3.6.1.4.1.89.222.5.1.5
The sequence number field is a signed 32-bit integer. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number the more recent the advertisement.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

rlOspfv3AsExternalLsaAge		1.3.6.1.4.1.89.222.5.1.6
This field is the age of the link state advertisement in seconds.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

rlOspfv3AsExternalLsaChecksum		1.3.6.1.4.1.89.222.5.1.7
This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connectionless datagrams; it is commonly referred to as the Fletcher checksum.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

rlOspfv3AsExternalLsaLength		1.3.6.1.4.1.89.222.5.1.8
The lenth in bytes of the LSA. This includes the 20 byte LSA header.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

rlOspfv3AsExternalLsaBitE		1.3.6.1.4.1.89.222.5.1.9
The type of external metric. If bit E is set, the metric specified is a Type 2 external metric.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	off(1), on(2)

rlOspfv3AsExternalLsaBitF		1.3.6.1.4.1.89.222.5.1.10
If set, a Forwarding Address has been included in the LSA.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	off(1), on(2)

rlOspfv3AsExternalLsaBitT		1.3.6.1.4.1.89.222.5.1.11
If set, an External Route Tag has been included in the LSA.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	off(1), on(2)

rlOspfv3AsExternalLsaMetric		1.3.6.1.4.1.89.222.5.1.12
The cost of this route. Interpretation depends on the external type indication (bit E above).
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

rlOspfv3AsExternalLsaReferencedLsType		1.3.6.1.4.1.89.222.5.1.13
If non-zero, an LSA with this LS type is to be associated with this LSA (see Referenced Link State ID below).
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

rlOspfv3AsExternalLsaPrefixLength		1.3.6.1.4.1.89.222.5.1.14
IPv6 address prefix length.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

rlOspfv3AsExternalLsaPrefixOptions		1.3.6.1.4.1.89.222.5.1.15
IPv6 address prefix options.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

rlOspfv3AsExternalLsaAddressPrefix		1.3.6.1.4.1.89.222.5.1.16
IPv6 address prefix - bit strings of length 128.
Status: current	Access: read-only
OBJECT-TYPE
	InetAddress

rlOspfv3AsExternalLsaForwardingAddress		1.3.6.1.4.1.89.222.5.1.17
A fully qualified IPv6 address (128 bits). Included in the LSA if and only if bit F has been set.
Status: current	Access: read-only
OBJECT-TYPE
	InetAddress

rlOspfv3AsExternalLsaExternalRouteTag		1.3.6.1.4.1.89.222.5.1.18
A 32-bit field which may be used to communicate additional information between AS boundary routers.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

rlOspfv3AsExternalLsaReferencedLinkStateId		1.3.6.1.4.1.89.222.5.1.19
Included if and only if Reference LS Type is non-zero.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

rlOspfv3LinkLsaTable		1.3.6.1.4.1.89.222.6
Link (Type 8) Link State Advertisement.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		RlOspfv3LinkLsaEntry

rlOspfv3LinkLsaEntry		1.3.6.1.4.1.89.222.6.1
A single entry from Network LSA.
Status: current	Access: not-accessible
OBJECT-TYPE
	RlOspfv3LinkLsaEntry

rlOspfv3LinkLsaProcessId		1.3.6.1.4.1.89.222.6.1.1
A 32-bit integer uniquely identifying an OSPFv3 process.
Status: current	Access: read-only
OBJECT-TYPE
	RlOspfProcessID

rlOspfv3LinkLsaIfIndex		1.3.6.1.4.1.89.222.6.1.2
The identifier of the link from which the LSA was received.
Status: current	Access: not-accessible
OBJECT-TYPE
	Unsigned32

rlOspfv3LinkLsaIfInstId		1.3.6.1.4.1.89.222.6.1.3
OSPFv3 protocol instance ID specified in the OSPF header of the packet in which this LSA was received.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	0..255

rlOspfv3LinkLsaLsid		1.3.6.1.4.1.89.222.6.1.4
The Link State ID is an LS Type Specific field containing either a Router ID or an IP Address; it identifies the piece of the routing domain that is being described by the advertisement.
Status: current	Access: read-only
OBJECT-TYPE
	IpAddress

rlOspfv3LinkLsaRouterId		1.3.6.1.4.1.89.222.6.1.5
The 32 bit number that uniquely identifies the originating router in the Autonomous System.
Status: current	Access: read-only
OBJECT-TYPE
	RouterID

rlOspfv3LinkLsaIdx		1.3.6.1.4.1.89.222.6.1.6
The index is a unsigned 32-bit integer. It is used as sequence number of entry in the LSA and relevant only for Router or Network LSA which can contain unlimited number of entries.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	1..65535

rlOspfv3LinkLsaCount		1.3.6.1.4.1.89.222.6.1.7
Number of entries containg is the LSA.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	1..65535

rlOspfv3LinkLsaSequence		1.3.6.1.4.1.89.222.6.1.8
The sequence number field is a signed 32-bit integer. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number the more recent the advertisement.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

rlOspfv3LinkLsaAge		1.3.6.1.4.1.89.222.6.1.9
This field is the age of the link state advertisement in seconds.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

rlOspfv3LinkLsaChecksum		1.3.6.1.4.1.89.222.6.1.10
This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connectionless datagrams; it is commonly referred to as the Fletcher checksum.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

rlOspfv3LinkLsaLength		1.3.6.1.4.1.89.222.6.1.11
The lenth in bytes of the LSA. This includes the 20 byte LSA header.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

rlOspfv3LinkLsaRtrPri		1.3.6.1.4.1.89.222.6.1.12
The Router Priority of the interface attaching the originating router to the link.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

rlOspfv3LinkLsaOptions		1.3.6.1.4.1.89.222.6.1.13
The optional capabilities supported by the router. Through this mechanism routers of differing capabilities can be mixed within an OSPF routing domain.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

rlOspfv3LinkLsaLinkLocalInterfaceAddress		1.3.6.1.4.1.89.222.6.1.14
Link Local Interface Address. The originating router's link-local interface address on the link.
Status: current	Access: read-only
OBJECT-TYPE
	InetAddress

rlOspfv3LinkLsaPrefixLength		1.3.6.1.4.1.89.222.6.1.15
IPv6 address prefix length.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

rlOspfv3LinkLsaPrefixOptions		1.3.6.1.4.1.89.222.6.1.16
IPv6 address prefix options.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

rlOspfv3LinkLsaAddressPrefix		1.3.6.1.4.1.89.222.6.1.17
IPv6 address prefix - bit strings of length 128.
Status: current	Access: read-only
OBJECT-TYPE
	InetAddress

rlOspfv3IntraAreaPrefixLsaTable		1.3.6.1.4.1.89.222.7
Intra Area Prefix Link State Advertisement.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		RlOspfv3IntraAreaPrefixLsaEntry

rlOspfv3IntraAreaPrefixLsaEntry		1.3.6.1.4.1.89.222.7.1
A single entry from Network LSA.
Status: current	Access: not-accessible
OBJECT-TYPE
	RlOspfv3IntraAreaPrefixLsaEntry

rlOspfv3IntraAreaPrefixLsaProcessId		1.3.6.1.4.1.89.222.7.1.1
A 32-bit integer uniquely identifying an OSPFv3 process.
Status: current	Access: read-only
OBJECT-TYPE
	RlOspfProcessID

rlOspfv3IntraAreaPrefixLsaAreaId		1.3.6.1.4.1.89.222.7.1.2
The 32 bit identifier of the Area from which the LSA was received.
Status: current	Access: read-only
OBJECT-TYPE
	AreaID

rlOspfv3IntraAreaPrefixLsaLsid		1.3.6.1.4.1.89.222.7.1.3
The Link State ID is an LS Type Specific field containing either a Router ID or an IP Address; it identifies the piece of the routing domain that is being described by the advertisement.
Status: current	Access: read-only
OBJECT-TYPE
	IpAddress

rlOspfv3IntraAreaPrefixLsaRouterId		1.3.6.1.4.1.89.222.7.1.4
The 32 bit number that uniquely identifies the originating router in the Autonomous System.
Status: current	Access: read-only
OBJECT-TYPE
	RouterID

rlOspfv3IntraAreaPrefixLsaIdx		1.3.6.1.4.1.89.222.7.1.5
The index is a unsigned 32-bit integer. It is used as sequence number of entry in the LSA and relevant only for Router or Network LSA which can contain unlimited number of entries.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	1..65535

rlOspfv3IntraAreaPrefixLsaCount		1.3.6.1.4.1.89.222.7.1.6
Number of entries containg is the LSA.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32	1..65535

rlOspfv3IntraAreaPrefixLsaSequence		1.3.6.1.4.1.89.222.7.1.7
The sequence number field is a signed 32-bit integer. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number the more recent the advertisement.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

rlOspfv3IntraAreaPrefixLsaAge		1.3.6.1.4.1.89.222.7.1.8
This field is the age of the link state advertisement in seconds.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

rlOspfv3IntraAreaPrefixLsaChecksum		1.3.6.1.4.1.89.222.7.1.9
This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connectionless datagrams; it is commonly referred to as the Fletcher checksum.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

rlOspfv3IntraAreaPrefixLsaLength		1.3.6.1.4.1.89.222.7.1.10
The lenth in bytes of the LSA. This includes the 20 byte LSA header.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

rlOspfv3IntraAreaPrefixLsaNumPrefixes		1.3.6.1.4.1.89.222.7.1.11
Number of IPv6 address prefixes contained in the LSA.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

rlOspfv3IntraAreaPrefixLsaReferenceLsType		1.3.6.1.4.1.89.222.7.1.12
Referenced LS Type: If the Referenced LS type is 1, the prefixes are associated with a router-LSA. If Referenced LS type is 2, the prefixes are associated with a network-LSA.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

rlOspfv3IntraAreaPrefixLsaReferenceLsId		1.3.6.1.4.1.89.222.7.1.13
Referenced Link State ID: If the prefixes are associated with a router-LSA, the Referenced Link State ID should be 0. If the prefixes are associated with a network-LSA, the Referenced Link State ID should be the Interface ID of the link's Designated Router.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

rlOspfv3IntraAreaPrefixLsaReferenceAdvRouter		1.3.6.1.4.1.89.222.7.1.14
Referenced Advertising Router: If the prefixes are associated with a router-LSA, the Referenced Advertising Router should be the originating router's Router ID. If the prefixes are associated with a network-LSA, Referenced Advertising Router should be the Designated Router's Router ID.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

rlOspfv3IntraAreaPrefixLsaMetric		1.3.6.1.4.1.89.222.7.1.15
The cost of this route. Expressed in the same units as the interface costs in the router-LSAs.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

rlOspfv3IntraAreaPrefixLsaPrefixLength		1.3.6.1.4.1.89.222.7.1.16
IPv6 address prefix length.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

rlOspfv3IntraAreaPrefixLsaPrefixOptions		1.3.6.1.4.1.89.222.7.1.17
IPv6 address prefix options.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

rlOspfv3IntraAreaPrefixLsaAddressPrefix		1.3.6.1.4.1.89.222.7.1.18
IPv6 address prefix - bit strings of length 128.
Status: current	Access: read-only
OBJECT-TYPE
	InetAddress