ONEACCESS-SHDSL-MIB

File: ONEACCESS-SHDSL-MIB.mib (25325 bytes)

Imported modules

SNMPv2-SMI IF-MIB ONEACCESS-GLOBAL-REG
HDSL2-SHDSL-LINE-MIB

Imported symbols

MODULE-IDENTITY OBJECT-TYPE Counter32
Counter64 Integer32 ifIndex
oacExpIMSystem hdsl2ShdslSpanStatusEntry hdsl2ShdslEndpointCurrEntry
hdsl2ShdslSpanConfProfileEntry

Defined Types

OacSHDSLSpanStatusEntry  
SEQUENCE    
  oacSHDSLSpanStatusUpDown Counter32
  oacSHDSLSpanStatusCurrStatus OCTET STRING
  oacSHDSLSpanStatusCurrShowtimeStart Counter32
  oacSHDSLSpanStatusCurrCellDelin Counter32
  oacSHDSLSpanStatusCurrCRCanomalies Counter32
  oacSHDSLSpanStatusCurrHECErrors Counter32
  oacSHDSLSpanStatusCurrRxCells Counter32
  oacSHDSLSpanStatusCurrTxCells Counter32
  oacSHDSLSpanStatusCurrRxDrops Counter32
  oacSHDSLSpanStatusCurrES Counter32
  oacSHDSLSpanStatusCurrSES Counter32
  oacSHDSLSpanStatusCurrLOSWS Counter32
  oacSHDSLSpanStatusCurrUAS Counter32
  oacSHDSLSpanStatusCurrConstellation INTEGER

OacSHDSLEndpointCurrEntry  
SEQUENCE    
  oacSHDSLEndpointCurrAtn Integer32
  oacSHDSLEndpointCurrSnrMgn Integer32
  oacSHDSLEndpointCurrTxPwr Integer32
  oacSHDSLEndpointCurrRxGain Integer32
  oacSHDSLEndpointCurrMaxAttainableLineRate Integer32
  oacSHDSLEndpointCurrCommands Integer32
  oacSHDSLEndpointCurrResponses Integer32
  oacSHDSLEndpointCurrdiscardedCommands Integer32
  oacSHDSLEndpointCurrerroredCommands Integer32
  oacSHDSLEndpointCurrReceivedFrames Integer32
  oacSHDSLEndpointCurrBadTransparency Integer32
  oacSHDSLEndpointCurrBadFCS Integer32
  oacSHDSLEndpointCurrEOCStatus OCTET STRING

OacSHDSLEndpointCurrretrainEntry  
SEQUENCE    
  oacSHDSLEndpointCurrretrainSQPAIR Integer32
  oacSHDSLEndpointCurrretrainSQLINE Integer32
  oacSHDSLEndpointCurrretrainCRCPAIR Integer32
  oacSHDSLEndpointCurrretrainCRCLINE Integer32
  oacSHDSLEndpointCurrretrainFsyncPAIR Integer32
  oacSHDSLEndpointCurrretrainFsyncLINE Integer32
  oacSHDSLEndpointCurrretrainFSyncSQPAIR Integer32
  oacSHDSLEndpointCurrretrainFSyncSQLINE Integer32

OacSHDSLSpanConfProfileEntry  
SEQUENCE    
  oacSHDSLSpanConfProfileConstellation INTEGER
  oacSHDSLSpanConfProfileAutoConfig INTEGER
  oacSHDSLSpanConfProfileCaplist INTEGER
  oacSHDSLSpanConfProfileEfmAggregation INTEGER
  oacSHDSLSpanConfProfileCrcCheck Integer32
  oacSHDSLSpanConfProfileMeansqCheck Integer32
  oacSHDSLSpanConfProfileMeansqThreshold Integer32
  oacSHDSLSpanConfProfileLineProbing INTEGER
  oacSHDSLSpanConfProfileEocManagement INTEGER
  oacSHDSLSpanConfProfileEocStatusPollDelay Integer32
  oacSHDSLSpanConfProfileEocStatusPollInterval Integer32

Defined Values

oacSHDSLMIBModule 1.3.6.1.4.1.13191.10.3.3.3
Contact updated
MODULE-IDENTITY    

oacSHDSLObjects 1.3.6.1.4.1.13191.10.3.3.3.1
OBJECT IDENTIFIER    

oacSHDSLSpanStatusTable 1.3.6.1.4.1.13191.10.3.3.3.1.2
This table provides overall status information of HDSL2/SHDSL spans. This table contains live data from equipment. As such, it is NOT persistent.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    OacSHDSLSpanStatusEntry

oacSHDSLSpanStatusEntry 1.3.6.1.4.1.13191.10.3.3.3.1.2.1
An entry in the oacSHDSLSpanStatusTable. Each entry represents the complete span in a single HDSL2/SHDSL line. It is indexed by the ifIndex of the associated HDSL2/SHDSL line.
Status: current Access: not-accessible
OBJECT-TYPE    
  OacSHDSLSpanStatusEntry  

oacSHDSLSpanStatusUpDown 1.3.6.1.4.1.13191.10.3.3.3.1.2.1.1
Contains the Global Up/Down Counter for the span.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

oacSHDSLSpanStatusCurrStatus 1.3.6.1.4.1.13191.10.3.3.3.1.2.1.2
Contains the current G.SHDSL Status.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(30)  

oacSHDSLSpanStatusCurrShowtimeStart 1.3.6.1.4.1.13191.10.3.3.3.1.2.1.3
Contains the current Showtime Start.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

oacSHDSLSpanStatusCurrCellDelin 1.3.6.1.4.1.13191.10.3.3.3.1.2.1.4
Contains the current Cell Delin counter.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

oacSHDSLSpanStatusCurrCRCanomalies 1.3.6.1.4.1.13191.10.3.3.3.1.2.1.5
Contains the current CRC counter.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

oacSHDSLSpanStatusCurrHECErrors 1.3.6.1.4.1.13191.10.3.3.3.1.2.1.6
Contains the current HEC counter.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

oacSHDSLSpanStatusCurrRxCells 1.3.6.1.4.1.13191.10.3.3.3.1.2.1.7
Contains the current Rx Cells counter.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

oacSHDSLSpanStatusCurrTxCells 1.3.6.1.4.1.13191.10.3.3.3.1.2.1.8
Contains the current Tx Cells counter.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

oacSHDSLSpanStatusCurrRxDrops 1.3.6.1.4.1.13191.10.3.3.3.1.2.1.9
Contains the current Rx Drops counter.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

oacSHDSLSpanStatusCurrES 1.3.6.1.4.1.13191.10.3.3.3.1.2.1.10
Contains the current ES counter.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

oacSHDSLSpanStatusCurrSES 1.3.6.1.4.1.13191.10.3.3.3.1.2.1.11
Contains the current SES counter.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

oacSHDSLSpanStatusCurrLOSWS 1.3.6.1.4.1.13191.10.3.3.3.1.2.1.12
Contains the current LOSWS counter.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

oacSHDSLSpanStatusCurrUAS 1.3.6.1.4.1.13191.10.3.3.3.1.2.1.13
Contains the current UAS counter.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

oacSHDSLSpanStatusCurrConstellation 1.3.6.1.4.1.13191.10.3.3.3.1.2.1.14
The current constellation (line coding) for the span.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER tcPam16(2), tcPam32(3)  

oacSHDSLEndpointCurrTable 1.3.6.1.4.1.13191.10.3.3.3.1.5
This table contains current status and performance information for segment endpoints in HDSL2/SHDSL lines. As with other tables in this MIB module indexed by ifIndex, entries in this table MUST be maintained in a persistent manner.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    OacSHDSLEndpointCurrEntry

oacSHDSLEndpointCurrEntry 1.3.6.1.4.1.13191.10.3.3.3.1.5.1
Defines an entry in the oacSHDSLEndpointCurrTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  OacSHDSLEndpointCurrEntry  

oacSHDSLEndpointCurrAtn 1.3.6.1.4.1.13191.10.3.3.3.1.5.1.1
The current loop attenuation for this endpoint as reported in a Network or Customer Side Performance Status message. In tenths of dB.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 -1270..1280  

oacSHDSLEndpointCurrSnrMgn 1.3.6.1.4.1.13191.10.3.3.3.1.5.1.2
The current SNR margin for this endpoint as reported in a Status Response/SNR message. In tenths of dB.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 -1270..1280  

oacSHDSLEndpointCurrTxPwr 1.3.6.1.4.1.13191.10.3.3.3.1.5.1.3
The current transmit power for this endpoint. In tenths of dB.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

oacSHDSLEndpointCurrRxGain 1.3.6.1.4.1.13191.10.3.3.3.1.5.1.4
The current receiver gain for this endpoint. In tenths of dB.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

oacSHDSLEndpointCurrMaxAttainableLineRate 1.3.6.1.4.1.13191.10.3.3.3.1.5.1.5
The current Max Attainable LineRate for this endpoint.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

oacSHDSLEndpointCurrCommands 1.3.6.1.4.1.13191.10.3.3.3.1.5.1.6
The current Commands for this endpoint.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

oacSHDSLEndpointCurrResponses 1.3.6.1.4.1.13191.10.3.3.3.1.5.1.7
The current Responses for this endpoint.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

oacSHDSLEndpointCurrdiscardedCommands 1.3.6.1.4.1.13191.10.3.3.3.1.5.1.8
The current discarded Commands for this endpoint.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

oacSHDSLEndpointCurrerroredCommands 1.3.6.1.4.1.13191.10.3.3.3.1.5.1.9
The current errored Commands for this endpoint.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

oacSHDSLEndpointCurrReceivedFrames 1.3.6.1.4.1.13191.10.3.3.3.1.5.1.10
The current Received Frames for this endpoint.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

oacSHDSLEndpointCurrBadTransparency 1.3.6.1.4.1.13191.10.3.3.3.1.5.1.11
The current Bad Transparency for this endpoint.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

oacSHDSLEndpointCurrBadFCS 1.3.6.1.4.1.13191.10.3.3.3.1.5.1.12
The current Bad FCS for this endpoint.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

oacSHDSLEndpointCurrEOCStatus 1.3.6.1.4.1.13191.10.3.3.3.1.5.1.13
The current EOC Status for this endpoint.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(50)  

oacSHDSLEndpointCurrretrainTable 1.3.6.1.4.1.13191.10.3.3.3.1.7
This table contains current status and performance information for segment endpoints in HDSL2/SHDSL lines. As with other tables in this MIB module indexed by ifIndex, entries in this table MUST be maintained in a persistent manner.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    OacSHDSLEndpointCurrretrainEntry

oacSHDSLEndpointCurrretrainEntry 1.3.6.1.4.1.13191.10.3.3.3.1.7.1
Defines an entry in the oacSHDSLEndpointCurrretrainTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  OacSHDSLEndpointCurrretrainEntry  

oacSHDSLEndpointCurrretrainSQPAIR 1.3.6.1.4.1.13191.10.3.3.3.1.7.1.1
The current retrain SQ for this endpoint as reported in a Network or Customer Side Performance Status message.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

oacSHDSLEndpointCurrretrainSQLINE 1.3.6.1.4.1.13191.10.3.3.3.1.7.1.2
The current retrain SQ for this endpoint as reported in a Network or Customer Side Performance Status message.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

oacSHDSLEndpointCurrretrainCRCPAIR 1.3.6.1.4.1.13191.10.3.3.3.1.7.1.3
The current retrain CRC for this endpoint as reported in a Network or Customer Side Performance Status message.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

oacSHDSLEndpointCurrretrainCRCLINE 1.3.6.1.4.1.13191.10.3.3.3.1.7.1.4
The current retrain CRC for this endpoint as reported in a Network or Customer Side Performance Status message.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

oacSHDSLEndpointCurrretrainFsyncPAIR 1.3.6.1.4.1.13191.10.3.3.3.1.7.1.5
The current retrain Fsync for this endpoint as reported in a Network or Customer Side Performance Status message.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

oacSHDSLEndpointCurrretrainFsyncLINE 1.3.6.1.4.1.13191.10.3.3.3.1.7.1.6
The current retrain Fsync for this endpoint as reported in a Network or Customer Side Performance Status message.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

oacSHDSLEndpointCurrretrainFSyncSQPAIR 1.3.6.1.4.1.13191.10.3.3.3.1.7.1.7
The current retrain FSync&SQ for this endpoint as reported in a Network or Customer Side Performance Status message.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

oacSHDSLEndpointCurrretrainFSyncSQLINE 1.3.6.1.4.1.13191.10.3.3.3.1.7.1.8
The current retrain FSync&SQ for this endpoint as reported in a Network or Customer Side Performance Status message.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

oacSHDSLTraps 1.3.6.1.4.1.13191.10.3.3.3.2
OBJECT IDENTIFIER    

oacSHDSLTrapPrefix 1.3.6.1.4.1.13191.10.3.3.3.2.0
OBJECT IDENTIFIER    

oacSHDSLHardDownTrap 1.3.6.1.4.1.13191.10.3.3.3.2.0.1
this notification indicate that the shdsl line speed is lower than the threshold configured in efm interface. as consequence, the interface ethernet which the hard-down option is enable will be shutdown, it will be UP if the shdsl line recovered the good linerate.
Status: current Access: read-only
NOTIFICATION-TYPE    

oacSHDSLSpanConfProfileTable 1.3.6.1.4.1.13191.10.3.3.3.1.10
This table supports definitions of span configuration profiles for SHDSL lines. This table MUST be maintained in a persistent manner
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    OacSHDSLSpanConfProfileEntry

oacSHDSLSpanConfProfileEntry 1.3.6.1.4.1.13191.10.3.3.3.1.10.1
Each entry corresponds to a single span configuration profile. Each profile contains a set of span configuration parameters. The configuration parameters in a profile are applied to those lines referencing that profile (see the hdsl2ShdslSpanConfProfile object).
Status: current Access: not-accessible
OBJECT-TYPE    
  OacSHDSLSpanConfProfileEntry  

oacSHDSLSpanConfProfileConstellation 1.3.6.1.4.1.13191.10.3.3.3.1.10.1.1
The configured constellation (line coding) for the span. Corresponds to cli command (controller shdsl 0, dsl-group 0): annex ... tc-pam
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER auto(1), tcPam16(2), tcPam32(3)  

oacSHDSLSpanConfProfileAutoConfig 1.3.6.1.4.1.13191.10.3.3.3.1.10.1.2
The configured auto configuration mode (enabled or disabled) for the span. Corresponds to cli command (controller shdsl 0, dsl-group 0): autoconfig / no autoconfig
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

oacSHDSLSpanConfProfileCaplist 1.3.6.1.4.1.13191.10.3.3.3.1.10.1.3
The configured capability list style for the span. Corresponds to cli command (controller shdsl 0, dsl-group 0): caplist
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER newstyle(1), oldstyle(2), auto(3)  

oacSHDSLSpanConfProfileEfmAggregation 1.3.6.1.4.1.13191.10.3.3.3.1.10.1.4
The configured efm aggregation mode for the span. Corresponds to cli command (controller shdsl 0, dsl-group 0): efmaggregation
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER disabled(1), auto(2), negotiated(3), static(4)  

oacSHDSLSpanConfProfileCrcCheck 1.3.6.1.4.1.13191.10.3.3.3.1.10.1.5
The configured numbered of consecutive seconds with crc errors after which the link will be retrained. If the value is set to 0, than no retrain will occur based on crc errors. Corresponds to cli command (controller shdsl 0, dsl-group 0): value 0 : crc no all other values: crc check
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..30  

oacSHDSLSpanConfProfileMeansqCheck 1.3.6.1.4.1.13191.10.3.3.3.1.10.1.6
The configured numbered of consecutive seconds where the noise margin is below the configured threshold (oacSHDSLSpanConfProfileMeansqThreshold) after which the link will be retrained. If the value is set to 0, than no retrain will occur based on noise margin verification. Corresponds to cli command (controller shdsl 0, dsl-group 0): value 0 : meansq no all other values: meansq check
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..30  

oacSHDSLSpanConfProfileMeansqThreshold 1.3.6.1.4.1.13191.10.3.3.3.1.10.1.7
The configured threshold (in dB) for retrain check based on the noise margin. If the noise margin drops below the configured threshold for the configured time (oacSHDSLSpanConfProfileMeansqCheck) than the link will be retrained. Corresponds to cli command (controller shdsl 0, dsl-group 0): meansq check
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 -2..10  

oacSHDSLSpanConfProfileLineProbing 1.3.6.1.4.1.13191.10.3.3.3.1.10.1.8
The configured linprobing mechanism. - normal corresponds to the standard line probing (pmms) as defined in the standard (G.991.2). - adaptive has to be used in situations where there is cross-talk between the lines of the same span. A propriatary algorithm will be activated that will limit the maximum speed if the normal line probing mechanism cannot reach a stable sync due to it's limitations (cross-talk is not taken into account in the standard line probing mechanism). The disadvantage of the adaptive mode is that it can take a long time before a stable sync is reached. Corresponds to cli command (controller shdsl 0, dsl-group 0): lineprobing
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER adaptive(1), normal(2)  

oacSHDSLSpanConfProfileEocManagement 1.3.6.1.4.1.13191.10.3.3.3.1.10.1.9
This object enables/disables the EOC management of the SHDSL line in this unit.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

oacSHDSLSpanConfProfileEocStatusPollDelay 1.3.6.1.4.1.13191.10.3.3.3.1.10.1.10
The delay in seconds after the start of the full quarter of an hour when an EOC full status request is sent to the devices in the span. Periodically after this start point full status request will be sent with a configured interval (oacSHDSLSpanConfProfileEocStatusPollInterval).
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..29  

oacSHDSLSpanConfProfileEocStatusPollInterval 1.3.6.1.4.1.13191.10.3.3.3.1.10.1.11
The delay in seconds between 2 EOC full status requests to the same device in the shdsl span.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 30 | 60 | 90 | 120  

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor