Nortel-Magellan-Passport-AtmUniMIB

File: Nortel-Magellan-Passport-AtmUniMIB.mib (134864 bytes)

Imported modules

RFC-1212 Nortel-Magellan-Passport-UsefulDefinitionsMIB Nortel-Magellan-Passport-StandardTextualConventionsMIB
Nortel-Magellan-Passport-TextualConventionsMIB Nortel-Magellan-Passport-AtmCoreMIB

Imported symbols

OBJECT-TYPE passportMIBs Counter32
DisplayString StorageType RowStatus
Gauge32 Integer32 Unsigned32
AsciiString Hex NonReplicated
AsciiStringIndex atmIfVptIndex atmIfVpt
atmIfIndex atmIf

Defined Types

AtmIfUniRowStatusEntry  
SEQUENCE    
  atmIfUniRowStatus RowStatus
  atmIfUniComponentName DisplayString
  atmIfUniStorageType StorageType
  atmIfUniIndex NonReplicated

AtmIfUniProvEntry  
SEQUENCE    
  atmIfUniVersion INTEGER
  atmIfUniSide INTEGER
  atmIfUniSoftPvcRetryPeriod Unsigned32
  atmIfUniSoftPvpAndPvcRetryPeriod Unsigned32
  atmIfUniSoftPvpAndPvcHoldOffTime Unsigned32

AtmIfUniOperEntry  
SEQUENCE    
  atmIfUniMacAddress AsciiString

AtmIfUniAcctOptEntry  
SEQUENCE    
  atmIfUniAccountCollection OCTET STRING
  atmIfUniAccountConnectionType INTEGER
  atmIfUniAccountClass Unsigned32
  atmIfUniServiceExchange Unsigned32

AtmIfUniIlmiRowStatusEntry  
SEQUENCE    
  atmIfUniIlmiRowStatus RowStatus
  atmIfUniIlmiComponentName DisplayString
  atmIfUniIlmiStorageType StorageType
  atmIfUniIlmiIndex NonReplicated

AtmIfUniIlmiStateEntry  
SEQUENCE    
  atmIfUniIlmiAdminState INTEGER
  atmIfUniIlmiOperationalState INTEGER
  atmIfUniIlmiUsageState INTEGER

AtmIfUniIlmiProvEntry  
SEQUENCE    
  atmIfUniIlmiVci Unsigned32
  atmIfUniIlmiOperatingMode INTEGER

AtmIfUniIlmiStatsEntry  
SEQUENCE    
  atmIfUniIlmiTxPdus Counter32
  atmIfUniIlmiRxPdus Counter32
  atmIfUniIlmiRxBadPdusDiscarded Counter32

AtmIfUniIlmiPrefixToRegisterEntry  
SEQUENCE    
  atmIfUniIlmiPrefixToRegisterValue AsciiString
  atmIfUniIlmiPrefixToRegisterRowStatus RowStatus

AtmIfUniIlmiEsiToRegisterEntry  
SEQUENCE    
  atmIfUniIlmiEsiToRegisterValue AsciiString
  atmIfUniIlmiEsiToRegisterRowStatus RowStatus

AtmIfUniSigRowStatusEntry  
SEQUENCE    
  atmIfUniSigRowStatus RowStatus
  atmIfUniSigComponentName DisplayString
  atmIfUniSigStorageType StorageType
  atmIfUniSigIndex NonReplicated

AtmIfUniSigProvEntry  
SEQUENCE    
  atmIfUniSigVci Unsigned32
  atmIfUniSigAddressConversion INTEGER

AtmIfUniSigStateEntry  
SEQUENCE    
  atmIfUniSigAdminState INTEGER
  atmIfUniSigOperationalState INTEGER
  atmIfUniSigUsageState INTEGER

AtmIfUniSigOperEntry  
SEQUENCE    
  atmIfUniSigLastTxCauseCode Unsigned32
  atmIfUniSigLastTxDiagCode Hex
  atmIfUniSigLastRxCauseCode Unsigned32
  atmIfUniSigLastRxDiagCode Hex

AtmIfUniSigStatsEntry  
SEQUENCE    
  atmIfUniSigCurrentConnections Counter32
  atmIfUniSigPeakConnections Gauge32
  atmIfUniSigSuccessfulConnections Counter32
  atmIfUniSigFailedConnections Counter32
  atmIfUniSigTxPdus Counter32
  atmIfUniSigRxPdus Counter32
  atmIfUniSigCurrentPmpConnections Gauge32
  atmIfUniSigPeakPmpConnections Gauge32
  atmIfUniSigSuccessfulPmpConnections Counter32
  atmIfUniSigFailedPmpConnections Counter32
  atmIfUniSigNewCurrentConnections Gauge32

AtmIfUniSigVcdRowStatusEntry  
SEQUENCE    
  atmIfUniSigVcdRowStatus RowStatus
  atmIfUniSigVcdComponentName DisplayString
  atmIfUniSigVcdStorageType StorageType
  atmIfUniSigVcdIndex NonReplicated

AtmIfUniSigVcdProvEntry  
SEQUENCE    
  atmIfUniSigVcdTrafficDescType INTEGER
  atmIfUniSigVcdAtmServiceCategory INTEGER
  atmIfUniSigVcdQosClass INTEGER
  atmIfUniSigVcdTrafficShaping INTEGER
  atmIfUniSigVcdUnshapedTransmitQueueing INTEGER
  atmIfUniSigVcdUsageParameterControl INTEGER

AtmIfUniSigVcdTdpEntry  
SEQUENCE    
  atmIfUniSigVcdTdpIndex Integer32
  atmIfUniSigVcdTdpValue Unsigned32

AtmIfUniAddrRowStatusEntry  
SEQUENCE    
  atmIfUniAddrRowStatus RowStatus
  atmIfUniAddrComponentName DisplayString
  atmIfUniAddrStorageType StorageType
  atmIfUniAddrAddressIndex AsciiStringIndex
  atmIfUniAddrAddressTypeIndex INTEGER

AtmIfUniAddrOperEntry  
SEQUENCE    
  atmIfUniAddrScope INTEGER
  atmIfUniAddrReachability INTEGER

AtmIfUniAddrTermSPRowStatusEntry  
SEQUENCE    
  atmIfUniAddrTermSPRowStatus RowStatus
  atmIfUniAddrTermSPComponentName DisplayString
  atmIfUniAddrTermSPStorageType StorageType
  atmIfUniAddrTermSPIndex NonReplicated

AtmIfUniAddrPnniInfoRowStatusEntry  
SEQUENCE    
  atmIfUniAddrPnniInfoRowStatus RowStatus
  atmIfUniAddrPnniInfoComponentName DisplayString
  atmIfUniAddrPnniInfoStorageType StorageType
  atmIfUniAddrPnniInfoIndex NonReplicated

AtmIfUniAddrPnniInfoProvEntry  
SEQUENCE    
  atmIfUniAddrPnniInfoScope INTEGER
  atmIfUniAddrPnniInfoReachability INTEGER

AtmIfVptUniRowStatusEntry  
SEQUENCE    
  atmIfVptUniRowStatus RowStatus
  atmIfVptUniComponentName DisplayString
  atmIfVptUniStorageType StorageType
  atmIfVptUniIndex NonReplicated

AtmIfVptUniProvEntry  
SEQUENCE    
  atmIfVptUniVersion INTEGER
  atmIfVptUniSide INTEGER
  atmIfVptUniSoftPvcRetryPeriod Unsigned32
  atmIfVptUniSoftPvpAndPvcRetryPeriod Unsigned32
  atmIfVptUniSoftPvpAndPvcHoldOffTime Unsigned32

AtmIfVptUniAcctOptEntry  
SEQUENCE    
  atmIfVptUniAccountCollection OCTET STRING
  atmIfVptUniAccountConnectionType INTEGER
  atmIfVptUniAccountClass Unsigned32
  atmIfVptUniServiceExchange Unsigned32

AtmIfVptUniVProvEntry  
SEQUENCE    
  atmIfVptUniVpci Unsigned32

AtmIfVptUniSigRowStatusEntry  
SEQUENCE    
  atmIfVptUniSigRowStatus RowStatus
  atmIfVptUniSigComponentName DisplayString
  atmIfVptUniSigStorageType StorageType
  atmIfVptUniSigIndex NonReplicated

AtmIfVptUniSigProvEntry  
SEQUENCE    
  atmIfVptUniSigVci Unsigned32
  atmIfVptUniSigAddressConversion INTEGER

AtmIfVptUniSigStateEntry  
SEQUENCE    
  atmIfVptUniSigAdminState INTEGER
  atmIfVptUniSigOperationalState INTEGER
  atmIfVptUniSigUsageState INTEGER

AtmIfVptUniSigOperEntry  
SEQUENCE    
  atmIfVptUniSigLastTxCauseCode Unsigned32
  atmIfVptUniSigLastTxDiagCode Hex
  atmIfVptUniSigLastRxCauseCode Unsigned32
  atmIfVptUniSigLastRxDiagCode Hex

AtmIfVptUniSigStatsEntry  
SEQUENCE    
  atmIfVptUniSigCurrentConnections Counter32
  atmIfVptUniSigPeakConnections Gauge32
  atmIfVptUniSigSuccessfulConnections Counter32
  atmIfVptUniSigFailedConnections Counter32
  atmIfVptUniSigTxPdus Counter32
  atmIfVptUniSigRxPdus Counter32
  atmIfVptUniSigCurrentPmpConnections Gauge32
  atmIfVptUniSigPeakPmpConnections Gauge32
  atmIfVptUniSigSuccessfulPmpConnections Counter32
  atmIfVptUniSigFailedPmpConnections Counter32
  atmIfVptUniSigNewCurrentConnections Gauge32

AtmIfVptUniSigVcdRowStatusEntry  
SEQUENCE    
  atmIfVptUniSigVcdRowStatus RowStatus
  atmIfVptUniSigVcdComponentName DisplayString
  atmIfVptUniSigVcdStorageType StorageType
  atmIfVptUniSigVcdIndex NonReplicated

AtmIfVptUniSigVcdProvEntry  
SEQUENCE    
  atmIfVptUniSigVcdTrafficDescType INTEGER
  atmIfVptUniSigVcdAtmServiceCategory INTEGER
  atmIfVptUniSigVcdQosClass INTEGER
  atmIfVptUniSigVcdTrafficShaping INTEGER
  atmIfVptUniSigVcdUnshapedTransmitQueueing INTEGER
  atmIfVptUniSigVcdUsageParameterControl INTEGER

AtmIfVptUniSigVcdTdpEntry  
SEQUENCE    
  atmIfVptUniSigVcdTdpIndex Integer32
  atmIfVptUniSigVcdTdpValue Unsigned32

AtmIfVptUniAddrRowStatusEntry  
SEQUENCE    
  atmIfVptUniAddrRowStatus RowStatus
  atmIfVptUniAddrComponentName DisplayString
  atmIfVptUniAddrStorageType StorageType
  atmIfVptUniAddrAddressIndex AsciiStringIndex
  atmIfVptUniAddrAddressTypeIndex INTEGER

AtmIfVptUniAddrOperEntry  
SEQUENCE    
  atmIfVptUniAddrScope INTEGER
  atmIfVptUniAddrReachability INTEGER

AtmIfVptUniAddrTermSPRowStatusEntry  
SEQUENCE    
  atmIfVptUniAddrTermSPRowStatus RowStatus
  atmIfVptUniAddrTermSPComponentName DisplayString
  atmIfVptUniAddrTermSPStorageType StorageType
  atmIfVptUniAddrTermSPIndex NonReplicated

AtmIfVptUniAddrPnniInfoRowStatusEntry  
SEQUENCE    
  atmIfVptUniAddrPnniInfoRowStatus RowStatus
  atmIfVptUniAddrPnniInfoComponentName DisplayString
  atmIfVptUniAddrPnniInfoStorageType StorageType
  atmIfVptUniAddrPnniInfoIndex NonReplicated

AtmIfVptUniAddrPnniInfoProvEntry  
SEQUENCE    
  atmIfVptUniAddrPnniInfoScope INTEGER
  atmIfVptUniAddrPnniInfoReachability INTEGER

Defined Values

atmUniMIB 1.3.6.1.4.1.562.2.4.2.69
OBJECT IDENTIFIER    

atmIfUni 1.3.6.1.4.1.562.2.4.1.114.6
OBJECT IDENTIFIER    

atmIfUniRowStatusTable 1.3.6.1.4.1.562.2.4.1.114.6.1
This entry controls the addition and deletion of atmIfUni components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfUniRowStatusEntry

atmIfUniRowStatusEntry 1.3.6.1.4.1.562.2.4.1.114.6.1.1
A single entry in the table represents a single atmIfUni component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtmIfUniRowStatusEntry  

atmIfUniRowStatus 1.3.6.1.4.1.562.2.4.1.114.6.1.1.1
This variable is used as the basis for SNMP naming of atmIfUni components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

atmIfUniComponentName 1.3.6.1.4.1.562.2.4.1.114.6.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

atmIfUniStorageType 1.3.6.1.4.1.562.2.4.1.114.6.1.1.4
This variable represents the storage type value for the atmIfUni tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

atmIfUniIndex 1.3.6.1.4.1.562.2.4.1.114.6.1.1.10
This variable represents the index for the atmIfUni tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

atmIfUniProvTable 1.3.6.1.4.1.562.2.4.1.114.6.10
This group contains the provisionable attributes for the Uni component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfUniProvEntry

atmIfUniProvEntry 1.3.6.1.4.1.562.2.4.1.114.6.10.1
An entry in the atmIfUniProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtmIfUniProvEntry  

atmIfUniVersion 1.3.6.1.4.1.562.2.4.1.114.6.10.1.1
This attribute specifies which specification the UNI complies with. The options are ATM FORUM 3.0 or ATM FORUM 3.1. If this attribute is changed then all switched Vcc components in this interface are cleared due to the fact that the two versions are incompatible.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER atmForum30(0), atmForum31(1)  

atmIfUniSide 1.3.6.1.4.1.562.2.4.1.114.6.10.1.2
This attribute indicates which side the interface is, user or network.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER network(0), user(1)  

atmIfUniSoftPvcRetryPeriod 1.3.6.1.4.1.562.2.4.1.114.6.10.1.3
This attribute represents the time in seconds to wait between call set up retries. The resolution is to the nearest 10 seconds. This attribute has been obsoleted and is replaced by the softPvpAndPvcRetryPeriod attribute.
Status: obsolete Access: read-write
OBJECT-TYPE    
  Unsigned32 20..999999  

atmIfUniSoftPvpAndPvcRetryPeriod 1.3.6.1.4.1.562.2.4.1.114.6.10.1.4
This attribute represents the time in seconds to wait between soft PVP or soft PVC call setup retries. The resolution is to the nearest 10 seconds.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 20..999999  

atmIfUniSoftPvpAndPvcHoldOffTime 1.3.6.1.4.1.562.2.4.1.114.6.10.1.5
This attribute specifies how long to hold off retries following a release or the connection. The resolution is to the nearest 50 ms.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0 | 50..20000  

atmIfUniOperTable 1.3.6.1.4.1.562.2.4.1.114.6.11
This attribute group contains the operational attributes for the Uni component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfUniOperEntry

atmIfUniOperEntry 1.3.6.1.4.1.562.2.4.1.114.6.11.1
An entry in the atmIfUniOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtmIfUniOperEntry  

atmIfUniMacAddress 1.3.6.1.4.1.562.2.4.1.114.6.11.1.1
This attribute indicates the MAC address of the port, which is used for address registration of the user side as the default ESI.
Status: mandatory Access: read-only
OBJECT-TYPE    
  AsciiString Size(12)  

atmIfUniAcctOptTable 1.3.6.1.4.1.562.2.4.1.114.6.12
This group contains the provisionable attributes for accounting.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfUniAcctOptEntry

atmIfUniAcctOptEntry 1.3.6.1.4.1.562.2.4.1.114.6.12.1
An entry in the atmIfUniAcctOptTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtmIfUniAcctOptEntry  

atmIfUniAccountCollection 1.3.6.1.4.1.562.2.4.1.114.6.12.1.1
This attribute is used to turn accounting on or off for SVC and SPVC connections. It also specifies the reason(s) for which accounting data is collected: billing, test, study, audit or force. If the set of reasons is not empty then accounting records will be generated by this interface in the following situations: - on a TODA changeover if TODA is enabled; - every 12 hours (per connection) if TODA is disabled; - on every call clear (a call record with final cell counts). If none of the reasons is present, then accounting will be suppressed. The reason for collection is recorded in the accounting record, in the attribute callingCollectReason or calledCollectReason as appropriate. Description of bits: bill(0) test(1) study(2) audit(3) force(4)
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1)  

atmIfUniAccountConnectionType 1.3.6.1.4.1.562.2.4.1.114.6.12.1.2
This attribute specifies whether accounting records generated by this interface should be marked as originating, terminating or intermediate. This attribute, in combination with the direction of the call, determines the value of attribute connPointType of the accounting record and may be used by downstream accounting processes to correlate the records. If the value is origTerm then records generated for incoming calls will be marked as originating and records generated for outgoing calls will be marked as terminating. If the value is intermediate then records generated for all calls will be marked as intermediate.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER origTerm(0), intermediate(1)  

atmIfUniAccountClass 1.3.6.1.4.1.562.2.4.1.114.6.12.1.3
This attribute specifies the accounting class associated with the interface. Its meaning is determined by the network operator. Its value is simply recorded in the accounting records generated by this interface, in the attribute callingServiceType or calledServiceType as appropriate.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..255  

atmIfUniServiceExchange 1.3.6.1.4.1.562.2.4.1.114.6.12.1.4
This attribute specifies the data service exchange associated with this interface. Its meaning is determined by the network operator. Its value is simply recorded in the accounting records generated by this interface, in the attribute callingDse or calledDse as appropriate.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..255  

atmIfUniIlmi 1.3.6.1.4.1.562.2.4.1.114.6.2
OBJECT IDENTIFIER    

atmIfUniIlmiRowStatusTable 1.3.6.1.4.1.562.2.4.1.114.6.2.1
This entry controls the addition and deletion of atmIfUniIlmi components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfUniIlmiRowStatusEntry

atmIfUniIlmiRowStatusEntry 1.3.6.1.4.1.562.2.4.1.114.6.2.1.1
A single entry in the table represents a single atmIfUniIlmi component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtmIfUniIlmiRowStatusEntry  

atmIfUniIlmiRowStatus 1.3.6.1.4.1.562.2.4.1.114.6.2.1.1.1
This variable is used as the basis for SNMP naming of atmIfUniIlmi components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

atmIfUniIlmiComponentName 1.3.6.1.4.1.562.2.4.1.114.6.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

atmIfUniIlmiStorageType 1.3.6.1.4.1.562.2.4.1.114.6.2.1.1.4
This variable represents the storage type value for the atmIfUniIlmi tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

atmIfUniIlmiIndex 1.3.6.1.4.1.562.2.4.1.114.6.2.1.1.10
This variable represents the index for the atmIfUniIlmi tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

atmIfUniIlmiStateTable 1.3.6.1.4.1.562.2.4.1.114.6.2.10
This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfUniIlmiStateEntry

atmIfUniIlmiStateEntry 1.3.6.1.4.1.562.2.4.1.114.6.2.10.1
An entry in the atmIfUniIlmiStateTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtmIfUniIlmiStateEntry  

atmIfUniIlmiAdminState 1.3.6.1.4.1.562.2.4.1.114.6.2.10.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

atmIfUniIlmiOperationalState 1.3.6.1.4.1.562.2.4.1.114.6.2.10.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

atmIfUniIlmiUsageState 1.3.6.1.4.1.562.2.4.1.114.6.2.10.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

atmIfUniIlmiProvTable 1.3.6.1.4.1.562.2.4.1.114.6.2.11
This attribute group contains the provisionable attributes for the Ilmi component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfUniIlmiProvEntry

atmIfUniIlmiProvEntry 1.3.6.1.4.1.562.2.4.1.114.6.2.11.1
An entry in the atmIfUniIlmiProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtmIfUniIlmiProvEntry  

atmIfUniIlmiVci 1.3.6.1.4.1.562.2.4.1.114.6.2.11.1.1
This attribute identifies the ILMI channel number.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..65535  

atmIfUniIlmiOperatingMode 1.3.6.1.4.1.562.2.4.1.114.6.2.11.1.2
This attribute is used to enable/disable the ILMI protocol. addressRegEnabled indicates that the ILMI address registration protocol is enabled. addressRegDisabled indicates that the ILMI address registration protocol is disabled. ilmiDisabled indicates that all of ILMI is disabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER addressRegEnabled(0), addressRegDisabled(1), ilmiDisabled(2)  

atmIfUniIlmiStatsTable 1.3.6.1.4.1.562.2.4.1.114.6.2.12
This attribute group contains the statistics for the AtmIlmi component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfUniIlmiStatsEntry

atmIfUniIlmiStatsEntry 1.3.6.1.4.1.562.2.4.1.114.6.2.12.1
An entry in the atmIfUniIlmiStatsTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtmIfUniIlmiStatsEntry  

atmIfUniIlmiTxPdus 1.3.6.1.4.1.562.2.4.1.114.6.2.12.1.1
This attribute counts the number of transmitted ILMI PDUs. The counter wraps to 0 when the maximum value is exceeded.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

atmIfUniIlmiRxPdus 1.3.6.1.4.1.562.2.4.1.114.6.2.12.1.2
This attribute counts the total number of received ILMI PDUs.The counter wraps to 0 when the maximum value is exceeded.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

atmIfUniIlmiRxBadPdusDiscarded 1.3.6.1.4.1.562.2.4.1.114.6.2.12.1.3
This attribute counts the number of received ILMI PDUs that were discarded due to invalid SNMP format. The counter wraps to 0 when the maximum value is exceeded.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

atmIfUniIlmiPrefixToRegisterTable 1.3.6.1.4.1.562.2.4.1.114.6.2.287
This attribute is a list of zero or more addresses. If the side attribute in the Uni component is set to user, then this attribute must be empty; if the side attribute is set to network, then this attribute is a list of prefixes.This attribute represents a list of prefix addresses (26 digits) that are sent to the user side. If no prefixes are entered, then the nodeAddress attribute in the AtmCallRouter component is used for address registration.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfUniIlmiPrefixToRegisterEntry

atmIfUniIlmiPrefixToRegisterEntry 1.3.6.1.4.1.562.2.4.1.114.6.2.287.1
An entry in the atmIfUniIlmiPrefixToRegisterTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtmIfUniIlmiPrefixToRegisterEntry  

atmIfUniIlmiPrefixToRegisterValue 1.3.6.1.4.1.562.2.4.1.114.6.2.287.1.1
This variable represents both the value and the index for the atmIfUniIlmiPrefixToRegisterTable.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AsciiString Size(26)  

atmIfUniIlmiPrefixToRegisterRowStatus 1.3.6.1.4.1.562.2.4.1.114.6.2.287.1.2
This variable is used to control the addition and deletion of individual values of the atmIfUniIlmiPrefixToRegisterTable.
Status: mandatory Access: write-only
OBJECT-TYPE    
  RowStatus  

atmIfUniIlmiEsiToRegisterTable 1.3.6.1.4.1.562.2.4.1.114.6.2.288
This attribute is a list of zero or more addresses. If the side attribute in the Uni component is set to network, then this attribute must be an empty list; if the side attribute is set to user, then this attribute is a list of end system indicators (ESI) addresses (12 hex digits) that are used to compose addresses to register with the network side.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfUniIlmiEsiToRegisterEntry

atmIfUniIlmiEsiToRegisterEntry 1.3.6.1.4.1.562.2.4.1.114.6.2.288.1
An entry in the atmIfUniIlmiEsiToRegisterTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtmIfUniIlmiEsiToRegisterEntry  

atmIfUniIlmiEsiToRegisterValue 1.3.6.1.4.1.562.2.4.1.114.6.2.288.1.1
This variable represents both the value and the index for the atmIfUniIlmiEsiToRegisterTable.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AsciiString Size(12)  

atmIfUniIlmiEsiToRegisterRowStatus 1.3.6.1.4.1.562.2.4.1.114.6.2.288.1.2
This variable is used to control the addition and deletion of individual values of the atmIfUniIlmiEsiToRegisterTable.
Status: mandatory Access: write-only
OBJECT-TYPE    
  RowStatus  

atmIfUniSig 1.3.6.1.4.1.562.2.4.1.114.6.3
OBJECT IDENTIFIER    

atmIfUniSigRowStatusTable 1.3.6.1.4.1.562.2.4.1.114.6.3.1
This entry controls the addition and deletion of atmIfUniSig components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfUniSigRowStatusEntry

atmIfUniSigRowStatusEntry 1.3.6.1.4.1.562.2.4.1.114.6.3.1.1
A single entry in the table represents a single atmIfUniSig component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtmIfUniSigRowStatusEntry  

atmIfUniSigRowStatus 1.3.6.1.4.1.562.2.4.1.114.6.3.1.1.1
This variable is used as the basis for SNMP naming of atmIfUniSig components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

atmIfUniSigComponentName 1.3.6.1.4.1.562.2.4.1.114.6.3.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

atmIfUniSigStorageType 1.3.6.1.4.1.562.2.4.1.114.6.3.1.1.4
This variable represents the storage type value for the atmIfUniSig tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

atmIfUniSigIndex 1.3.6.1.4.1.562.2.4.1.114.6.3.1.1.10
This variable represents the index for the atmIfUniSig tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

atmIfUniSigProvTable 1.3.6.1.4.1.562.2.4.1.114.6.3.10
This attribute group contains the provisionable attributes for the Signalling component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfUniSigProvEntry

atmIfUniSigProvEntry 1.3.6.1.4.1.562.2.4.1.114.6.3.10.1
An entry in the atmIfUniSigProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtmIfUniSigProvEntry  

atmIfUniSigVci 1.3.6.1.4.1.562.2.4.1.114.6.3.10.1.1
This attribute specifies the signalling channel number.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..65535  

atmIfUniSigAddressConversion 1.3.6.1.4.1.562.2.4.1.114.6.3.10.1.2
This attribute specifies the address conversion on the outgoing signalling PDUs. The options are none, nativeE164, or nsap. The none option is the default and if this option is chosen then nothing is done to the address information element (IE) in the outgoing signalling message. If nativeE164 option is chosen, then only NSAP encapsulated E.164 addresses with zeros in the ESI are converted to native E.164 format in the outgoing signalling message. If the NSAP address is not encapsulated E.164 or the ESI field is not zeros and the nativeE164 option is chosen, then the call is cleared. If the nsap option is chosen, then native E.164 addresses are converted to NSAP E.164 with zeros in the ESI field; otherwise the address is in NSAP format and is not changed.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(0), nativeE164(1), nsap(2)  

atmIfUniSigStateTable 1.3.6.1.4.1.562.2.4.1.114.6.3.11
This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfUniSigStateEntry

atmIfUniSigStateEntry 1.3.6.1.4.1.562.2.4.1.114.6.3.11.1
An entry in the atmIfUniSigStateTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtmIfUniSigStateEntry  

atmIfUniSigAdminState 1.3.6.1.4.1.562.2.4.1.114.6.3.11.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

atmIfUniSigOperationalState 1.3.6.1.4.1.562.2.4.1.114.6.3.11.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

atmIfUniSigUsageState 1.3.6.1.4.1.562.2.4.1.114.6.3.11.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

atmIfUniSigOperTable 1.3.6.1.4.1.562.2.4.1.114.6.3.12
This attribute contains the operational attributes for the AtmSignalling component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfUniSigOperEntry

atmIfUniSigOperEntry 1.3.6.1.4.1.562.2.4.1.114.6.3.12.1
An entry in the atmIfUniSigOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtmIfUniSigOperEntry  

atmIfUniSigLastTxCauseCode 1.3.6.1.4.1.562.2.4.1.114.6.3.12.1.1
This attribute indicates the cause code in the last transmitted signalling message that contains the CAUSE information element. The cause code is used to describe the reason for generating certain signalling messages.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..255  

atmIfUniSigLastTxDiagCode 1.3.6.1.4.1.562.2.4.1.114.6.3.12.1.2
This attribute contains the diagnostic code in the last transmitted signalling message. The diagnostic code is contained in the CAUSE information element and identifies an information element type or timer type. The diagnostic code is present only if a procedural error is detected by the signalling protocol. A diagnostic code is always accompanied by the cause code. If there is no failure, this attribute is set to 0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Hex 0..255  

atmIfUniSigLastRxCauseCode 1.3.6.1.4.1.562.2.4.1.114.6.3.12.1.3
This attribute contains the cause code in the last received signalling message that contains the CAUSE information element. The cause code is used to describe the reason for generating certain signalling messages.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..255  

atmIfUniSigLastRxDiagCode 1.3.6.1.4.1.562.2.4.1.114.6.3.12.1.4
This attribute contains the diagnostic code in the last received signalling message. The diagnostic code is contained in the CAUSE information element and identifies an information element type or timer type. The diagnostic code is present only if a procedural error is detected by the signalling protocol. A diagnostic code is always accompanied by the cause code. If there is no failure, this attribute is set to 0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Hex 0..255  

atmIfUniSigStatsTable 1.3.6.1.4.1.562.2.4.1.114.6.3.13
This attribute group contains the statistics associated with the AtmSignalling component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfUniSigStatsEntry

atmIfUniSigStatsEntry 1.3.6.1.4.1.562.2.4.1.114.6.3.13.1
An entry in the atmIfUniSigStatsTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtmIfUniSigStatsEntry  

atmIfUniSigCurrentConnections 1.3.6.1.4.1.562.2.4.1.114.6.3.13.1.1
This attribute indicates the total number of currently active connections.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter32  

atmIfUniSigPeakConnections 1.3.6.1.4.1.562.2.4.1.114.6.3.13.1.2
This attribute indicates the high water mark of active point-to- point and point-to-multipoint connections.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge32 0..4294967295  

atmIfUniSigSuccessfulConnections 1.3.6.1.4.1.562.2.4.1.114.6.3.13.1.3
This attribute counts the total number of switched point-to- point and point-to-multipoint connections that were successfully established. The counter wraps to 0 when the maximum value is exceeded.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

atmIfUniSigFailedConnections 1.3.6.1.4.1.562.2.4.1.114.6.3.13.1.4
This attribute counts the total number of switched connections that were not successfully established.The counter wraps to 0 when the maximum value is exceeded.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

atmIfUniSigTxPdus 1.3.6.1.4.1.562.2.4.1.114.6.3.13.1.5
This attribute counts the number of transmitted signalling PDUs.The counter wraps to 0 when the maximum value is exceeded.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

atmIfUniSigRxPdus 1.3.6.1.4.1.562.2.4.1.114.6.3.13.1.6
This attribute counts the number of received signalling PDUs.The counter wraps to 0 when the maximum value is exceeded.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

atmIfUniSigCurrentPmpConnections 1.3.6.1.4.1.562.2.4.1.114.6.3.13.1.7
This attribute indicates the number of currently active point-to- multipoint connections.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge32 0..4294967295  

atmIfUniSigPeakPmpConnections 1.3.6.1.4.1.562.2.4.1.114.6.3.13.1.8
This attribute indicates the high water mark of active point-to- multipoint connections.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge32 0..4294967295  

atmIfUniSigSuccessfulPmpConnections 1.3.6.1.4.1.562.2.4.1.114.6.3.13.1.9
This attribute counts the total number of switched point-to- multipoint connections that were successfully established. The counter wraps to 0 when the maximum value is exceeded.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

atmIfUniSigFailedPmpConnections 1.3.6.1.4.1.562.2.4.1.114.6.3.13.1.10
This attribute counts the number of switched point-to- multipoint connections that were not successfully established.The counter wraps to 0 when the maximum value is exceeded.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

atmIfUniSigNewCurrentConnections 1.3.6.1.4.1.562.2.4.1.114.6.3.13.1.11
This attribute indicates the total number of currently active point-to- point and point-to-multipoint connections.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge32 0..4294967295  

atmIfUniSigVcd 1.3.6.1.4.1.562.2.4.1.114.6.3.2
OBJECT IDENTIFIER    

atmIfUniSigVcdRowStatusTable 1.3.6.1.4.1.562.2.4.1.114.6.3.2.1
This entry controls the addition and deletion of atmIfUniSigVcd components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfUniSigVcdRowStatusEntry

atmIfUniSigVcdRowStatusEntry 1.3.6.1.4.1.562.2.4.1.114.6.3.2.1.1
A single entry in the table represents a single atmIfUniSigVcd component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtmIfUniSigVcdRowStatusEntry  

atmIfUniSigVcdRowStatus 1.3.6.1.4.1.562.2.4.1.114.6.3.2.1.1.1
This variable is used as the basis for SNMP naming of atmIfUniSigVcd components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

atmIfUniSigVcdComponentName 1.3.6.1.4.1.562.2.4.1.114.6.3.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

atmIfUniSigVcdStorageType 1.3.6.1.4.1.562.2.4.1.114.6.3.2.1.1.4
This variable represents the storage type value for the atmIfUniSigVcd tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

atmIfUniSigVcdIndex 1.3.6.1.4.1.562.2.4.1.114.6.3.2.1.1.10
This variable represents the index for the atmIfUniSigVcd tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

atmIfUniSigVcdProvTable 1.3.6.1.4.1.562.2.4.1.114.6.3.2.10
This group contains the provisionable traffic attributes for a control channel.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfUniSigVcdProvEntry

atmIfUniSigVcdProvEntry 1.3.6.1.4.1.562.2.4.1.114.6.3.2.10.1
An entry in the atmIfUniSigVcdProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtmIfUniSigVcdProvEntry  

atmIfUniSigVcdTrafficDescType 1.3.6.1.4.1.562.2.4.1.114.6.3.2.10.1.1
This attribute specifies the type of traffic management which is applied to both the transmit and receive direction of this connection as defined in the ATM Forum. The trafficDescType determines the number and meaning of the parameters in the trafficDescParm attribute.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER n3(3), n6(6), n7(7), n8(8)  

atmIfUniSigVcdAtmServiceCategory 1.3.6.1.4.1.562.2.4.1.114.6.3.2.10.1.3
This attribute specifies the ATM service category for both directions of the connection. The constantBitRate service category is intended for real time applications, that is those requiring tightly constrained delay and delay variation, as would be appropriate for voice and video applications. The consistent availability of a fixed quantity of bandwidth is considered appropriate for CBR service. Cells which are delayed beyond the value specified by CellTransfer Delay are assumed to be of significantly reduce value to the application. The rtVariableBitRate service category is intended for real time applications, that is those requiring tightly constrained delay and delay variation, as would be appropriate for voice and video applications. Sources are expected to transmit at a rate which varies with time. Equivalently, the source can be described as 'bursty'. Cells which are delayed beyond the value specified by CTD are assumed to be of significantly reduced value to the application. Real time VBR service may support statistical multiplexing of real time sources. The nrtVariableBitRate service category is intended for non-real time applications which have bursty traffic characteristics and which can be characterized in terms of a PCR, SCR, and MBS. For those cells which are transferred within the traffic contract, the application expects a low cell loss ratio. For all connections, it expects a bound on the mean cell transfer delay. Non-real time VBR service may support statistical multiplexing of connections. The unspecifiedBitRate service is intended for non-real time applications; that is, those not requiring tightly constrained delay and delay variation. UBR sources are expected to be bursty. UBR service supports a high degree of statistical multiplexing among sources. UBR service does not specify traffic related service guarantees. No numerical commitments are made with respect to the cell loss ratio experienced by a UBR connection, or as to the cell transfer delay experienced by cells on the connection.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER unspecifiedBitRate(0), constantBitRate(1), rtVariableBitRate(2), nrtVariableBitRate(3)  

atmIfUniSigVcdQosClass 1.3.6.1.4.1.562.2.4.1.114.6.3.2.10.1.21
This attribute specifies the quality of service for both the forward and backward direction for this connection. Class 1 supports a QOS that meets Service Class A performance requirements (Circuit emulation, constant bit rate video). Class 2 supports a QOS that meets Service Class B performance requirements (Variable bit rate audio and video). Class 3 supports a QOS that meets Service Class C performance requirements (Connection-Oriented Data Transfer). Class 4 supports a QOS that meets Service Class D performance requirements (Connectionless Data Transfer). Class 0 is the unspecified bit rate QOS class; no objective is specified for the performance parameters.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER n0(0), n1(1), n2(2), n3(3), n4(4)  

atmIfUniSigVcdTrafficShaping 1.3.6.1.4.1.562.2.4.1.114.6.3.2.10.1.50
This attribute specifies whether this connection uses traffic shaping when transmitting traffic to the ATM interface. When sameAsCa is selected, traffic shaping for this connection is based on the trafficShaping attribute of the connection's service category component under the AtmIf CA. If the service category has traffic shaping enabled, then traffic shaping is enabled for the connection. Note that enabling traffic shaping may have no effect under certain cases. These cases are listed in the description of the trafficShaping operational attribute, which is under the Vcc Tm and Vpc Tm components. When disabled is selected, traffic shaping for this connection is disabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), sameAsCa(2)  

atmIfUniSigVcdUnshapedTransmitQueueing 1.3.6.1.4.1.562.2.4.1.114.6.3.2.10.1.60
This attribute only applies when this connection is unshaped. This attribute specifies the transmit queueing method for this connection if it is unshaped. Refer to the unshapedTransmitQueueing attribute under the AtmIf CA service category subcomponent for more details on the meaning of this attribute. When this attribute is set to sameAsCa, the transmit queueing method for the connection is based on the unshapedTransmitQueueing attribute of the connection's service category component under the ConnectionAdministrator. When this attribute is set to common, transmit traffic on this unshaped connection is destined for the common queue. The value sameAsInterface is for migration from previous software releases, but should no longer be used
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER common(1), sameAsCa(3)  

atmIfUniSigVcdUsageParameterControl 1.3.6.1.4.1.562.2.4.1.114.6.3.2.10.1.70
This attribute specifies whether this connection enforces usage parameter control when receiving traffic from the ATM interface. When sameAsCa is selected, UPC for the connection is based on the usageParameterControl attribute of the connection's service category component under the ConnectionAdministrator. If the service category has UPC enabled, then UPC is enabled for the connection. Note that enabling UPC may have no effect under certain cases. These cases are listed in the description of the usageParameterControl operational attribute, which is under the Vcc Tm or Vpc Tm component. When disabled is selected, UPC for this connection is disabled. The value sameAsInterface is for migration from previous software releases, but should no longer be used
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), sameAsCa(2)  

atmIfUniSigVcdTdpTable 1.3.6.1.4.1.562.2.4.1.114.6.3.2.387
This attribute is a vector of five traffic parameters whose meanings are defined by the trafficDescType attribute. The values of peak cell rate (PCR), sustained cell rate (SCR) and requested shaping rate are expressed in cell/s. Maximum burst size (MBS) is expressed in cells. CDVT is expressed in microseconds. The values of PCR, SCR, MBS and CDVT are used for connection admission control (CAC). The value of CDVT is only used for connections where the atmServiceCategory is constantBitRate. For all other values of atmServiceCategory, CDVT is ignored. The values of PCR, SCR and requested shaping rate are used to determine the actual shaping rate where traffic shaping is enabled. When trafficDescType is 3, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 4 represents the CDVT; and parameter 5 represents the requested shaping rate. A non-zero value in parameter 5 overrides any value in parameter 1. This result is used as the PCR. Parameter 1 must be non-zero. Parameters 2 and 3 must be zero. When trafficDescType is 6, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP equal to 0 and 1 traffic; parameter 3 represents the MBS for CLP equal to 0 and 1 traffic; parameter 4 represents the CDVT; and parameter 5 represents the requested shaping rate. A non-zero value in parameter 5 overrides any value in parameter 1. This result is used as the PCR. Parameters 1, 2, and 3 must be non-zero. Parameter 1 must be greater than or equal to parameter 2. Parameter 5 must either be zero (unused) or greater than or equal to parameter 2. When trafficDescType is 7, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP equal to 0 with cell discard; parameter 3 represents the MBS for CLP equal to 0 traffic; parameter 4 represents the CDVT; and parameter 5 represents the requested shaping rate. A non-zero value in parameter 5 overrides any value in parameter 1. This result is used as the PCR. Parameters 1, 2, and 3 must be non-zero. Parameter 1 must be greater than or equal to parameter 2. Parameter 5 must either be zero (unused) or greater than or equal to parameter 2. When trafficDescType is 8, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP equal to 0 traffic with cell tagging; parameter 3 represents the MBS for CLP equal to 0 traffic; parameter 4 represents the CDVT; and parameter 5 represents the requested shaping rate. A non-zero value in parameter 5 overrides any value in parameter 1. This result is used as the PCR. Parameters 1, 2, and 3 must be non-zero. Parameter 1 must be greater than or equal to parameter 2. Parameter 5 must either be zero (unused) or greater than or equal to parameter 2. Whenever it is valid for PCR to be specified, parameter 5 may also be used to specify a requested shaping rate. A non-zero value in parameter 5 overrides the value in parameter 1 and is used as the peak cell rate in calculations of CAC and shaping rate. For trafficDescType 3 the traffic is shaped at the next rate less than the PCR. For trafficDescType 6, 7, and 8, the traffic is shaped at the highest available rate which is between PCR and SCR. However, if there is no available shaping rate between PCR and SCR, traffic is shaped at the next rate above the PCR.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfUniSigVcdTdpEntry

atmIfUniSigVcdTdpEntry 1.3.6.1.4.1.562.2.4.1.114.6.3.2.387.1
An entry in the atmIfUniSigVcdTdpTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtmIfUniSigVcdTdpEntry  

atmIfUniSigVcdTdpIndex 1.3.6.1.4.1.562.2.4.1.114.6.3.2.387.1.1
This variable represents the atmIfUniSigVcdTdpTable specific index for the atmIfUniSigVcdTdpTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Integer32 1..5  

atmIfUniSigVcdTdpValue 1.3.6.1.4.1.562.2.4.1.114.6.3.2.387.1.2
This variable represents an individual value for the atmIfUniSigVcdTdpTable.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..2147483647  

atmIfUniAddr 1.3.6.1.4.1.562.2.4.1.114.6.4
OBJECT IDENTIFIER    

atmIfUniAddrRowStatusTable 1.3.6.1.4.1.562.2.4.1.114.6.4.1
This entry controls the addition and deletion of atmIfUniAddr components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfUniAddrRowStatusEntry

atmIfUniAddrRowStatusEntry 1.3.6.1.4.1.562.2.4.1.114.6.4.1.1
A single entry in the table represents a single atmIfUniAddr component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtmIfUniAddrRowStatusEntry  

atmIfUniAddrRowStatus 1.3.6.1.4.1.562.2.4.1.114.6.4.1.1.1
This variable is used as the basis for SNMP naming of atmIfUniAddr components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

atmIfUniAddrComponentName 1.3.6.1.4.1.562.2.4.1.114.6.4.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

atmIfUniAddrStorageType 1.3.6.1.4.1.562.2.4.1.114.6.4.1.1.4
This variable represents the storage type value for the atmIfUniAddr tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

atmIfUniAddrAddressIndex 1.3.6.1.4.1.562.2.4.1.114.6.4.1.1.10
This variable represents an index for the atmIfUniAddr tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AsciiStringIndex Size(1..40)  

atmIfUniAddrAddressTypeIndex 1.3.6.1.4.1.562.2.4.1.114.6.4.1.1.11
This variable represents an index for the atmIfUniAddr tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER primary(0), alternate(1), registered(2), default(3)  

atmIfUniAddrOperTable 1.3.6.1.4.1.562.2.4.1.114.6.4.10
This attribute group contains the operational attributes for the Address component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfUniAddrOperEntry

atmIfUniAddrOperEntry 1.3.6.1.4.1.562.2.4.1.114.6.4.10.1
An entry in the atmIfUniAddrOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtmIfUniAddrOperEntry  

atmIfUniAddrScope 1.3.6.1.4.1.562.2.4.1.114.6.4.10.1.1
This attribute indicates the scope of the ATM address, which is the highest level to which this address will be advertised in the PNNI hierarchy. If no PnniInfo subcomponent has been provisioned, then the scope will default to the level of this node in the PNNI hierarchy. If this node does not participate in a PNNI hierarchy, then this attribute will have the value of -1.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER -1..104  

atmIfUniAddrReachability 1.3.6.1.4.1.562.2.4.1.114.6.4.10.1.2
This attribute indicates whether the address is internal or exterior. An internal reachable address is an address of a destination that is directly attached to the logical node advertising the address. An exterior reachable address is an address that can be reached through a PNNI routing domain, but which is not located in that PNNI routing domain.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER internal(0), exterior(1)  

atmIfUniAddrTermSP 1.3.6.1.4.1.562.2.4.1.114.6.4.2
OBJECT IDENTIFIER    

atmIfUniAddrTermSPRowStatusTable 1.3.6.1.4.1.562.2.4.1.114.6.4.2.1
This entry controls the addition and deletion of atmIfUniAddrTermSP components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfUniAddrTermSPRowStatusEntry

atmIfUniAddrTermSPRowStatusEntry 1.3.6.1.4.1.562.2.4.1.114.6.4.2.1.1
A single entry in the table represents a single atmIfUniAddrTermSP component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtmIfUniAddrTermSPRowStatusEntry  

atmIfUniAddrTermSPRowStatus 1.3.6.1.4.1.562.2.4.1.114.6.4.2.1.1.1
This variable is used as the basis for SNMP naming of atmIfUniAddrTermSP components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

atmIfUniAddrTermSPComponentName 1.3.6.1.4.1.562.2.4.1.114.6.4.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

atmIfUniAddrTermSPStorageType 1.3.6.1.4.1.562.2.4.1.114.6.4.2.1.1.4
This variable represents the storage type value for the atmIfUniAddrTermSP tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

atmIfUniAddrTermSPIndex 1.3.6.1.4.1.562.2.4.1.114.6.4.2.1.1.10
This variable represents the index for the atmIfUniAddrTermSP tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

atmIfUniAddrPnniInfo 1.3.6.1.4.1.562.2.4.1.114.6.4.3
OBJECT IDENTIFIER    

atmIfUniAddrPnniInfoRowStatusTable 1.3.6.1.4.1.562.2.4.1.114.6.4.3.1
This entry controls the addition and deletion of atmIfUniAddrPnniInfo components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfUniAddrPnniInfoRowStatusEntry

atmIfUniAddrPnniInfoRowStatusEntry 1.3.6.1.4.1.562.2.4.1.114.6.4.3.1.1
A single entry in the table represents a single atmIfUniAddrPnniInfo component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtmIfUniAddrPnniInfoRowStatusEntry  

atmIfUniAddrPnniInfoRowStatus 1.3.6.1.4.1.562.2.4.1.114.6.4.3.1.1.1
This variable is used as the basis for SNMP naming of atmIfUniAddrPnniInfo components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

atmIfUniAddrPnniInfoComponentName 1.3.6.1.4.1.562.2.4.1.114.6.4.3.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

atmIfUniAddrPnniInfoStorageType 1.3.6.1.4.1.562.2.4.1.114.6.4.3.1.1.4
This variable represents the storage type value for the atmIfUniAddrPnniInfo tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

atmIfUniAddrPnniInfoIndex 1.3.6.1.4.1.562.2.4.1.114.6.4.3.1.1.10
This variable represents the index for the atmIfUniAddrPnniInfo tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

atmIfUniAddrPnniInfoProvTable 1.3.6.1.4.1.562.2.4.1.114.6.4.3.10
This attribute group contains the provisioned attributes relating to PNNI for a PnniInfo component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfUniAddrPnniInfoProvEntry

atmIfUniAddrPnniInfoProvEntry 1.3.6.1.4.1.562.2.4.1.114.6.4.3.10.1
An entry in the atmIfUniAddrPnniInfoProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtmIfUniAddrPnniInfoProvEntry  

atmIfUniAddrPnniInfoScope 1.3.6.1.4.1.562.2.4.1.114.6.4.3.10.1.1
This attribute specifies the scope of the ATM address, which is the highest level up to which this address will be advertised in the PNNI hierarchy. The scope must be set to a value numerically less than or equal to the level of the lowest level peer group containing this node. Setting the scope to 0 will cause the address to be advertised globally within this PNNI routing domain.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER -1..104  

atmIfUniAddrPnniInfoReachability 1.3.6.1.4.1.562.2.4.1.114.6.4.3.10.1.2
This attribute indicates whether the address is internal or exterior. An internal reachable address is an address of a destination that is directly attached to the logical node advertising the address. An exterior reachable address is an address that can be reached through a PNNI routing domain, but which is not located in that PNNI routing domain.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER internal(0), exterior(1)  

atmIfVptUni 1.3.6.1.4.1.562.2.4.1.114.9.8
OBJECT IDENTIFIER    

atmIfVptUniRowStatusTable 1.3.6.1.4.1.562.2.4.1.114.9.8.1
This entry controls the addition and deletion of atmIfVptUni components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfVptUniRowStatusEntry

atmIfVptUniRowStatusEntry 1.3.6.1.4.1.562.2.4.1.114.9.8.1.1
A single entry in the table represents a single atmIfVptUni component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtmIfVptUniRowStatusEntry  

atmIfVptUniRowStatus 1.3.6.1.4.1.562.2.4.1.114.9.8.1.1.1
This variable is used as the basis for SNMP naming of atmIfVptUni components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

atmIfVptUniComponentName 1.3.6.1.4.1.562.2.4.1.114.9.8.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

atmIfVptUniStorageType 1.3.6.1.4.1.562.2.4.1.114.9.8.1.1.4
This variable represents the storage type value for the atmIfVptUni tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

atmIfVptUniIndex 1.3.6.1.4.1.562.2.4.1.114.9.8.1.1.10
This variable represents the index for the atmIfVptUni tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

atmIfVptUniProvTable 1.3.6.1.4.1.562.2.4.1.114.9.8.10
This group contains the provisionable attributes for the Uni component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfVptUniProvEntry

atmIfVptUniProvEntry 1.3.6.1.4.1.562.2.4.1.114.9.8.10.1
An entry in the atmIfVptUniProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtmIfVptUniProvEntry  

atmIfVptUniVersion 1.3.6.1.4.1.562.2.4.1.114.9.8.10.1.1
This attribute specifies which specification the UNI complies with. The options are ATM FORUM 3.0 or ATM FORUM 3.1. If this attribute is changed then all switched Vcc components in this interface are cleared due to the fact that the two versions are incompatible.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER atmForum30(0), atmForum31(1)  

atmIfVptUniSide 1.3.6.1.4.1.562.2.4.1.114.9.8.10.1.2
This attribute indicates which side the interface is, user or network.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER network(0), user(1)  

atmIfVptUniSoftPvcRetryPeriod 1.3.6.1.4.1.562.2.4.1.114.9.8.10.1.3
This attribute represents the time in seconds to wait between call set up retries. The resolution is to the nearest 10 seconds. This attribute has been obsoleted and is replaced by the softPvpAndPvcRetryPeriod attribute.
Status: obsolete Access: read-write
OBJECT-TYPE    
  Unsigned32 20..999999  

atmIfVptUniSoftPvpAndPvcRetryPeriod 1.3.6.1.4.1.562.2.4.1.114.9.8.10.1.4
This attribute represents the time in seconds to wait between soft PVP or soft PVC call setup retries. The resolution is to the nearest 10 seconds.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 20..999999  

atmIfVptUniSoftPvpAndPvcHoldOffTime 1.3.6.1.4.1.562.2.4.1.114.9.8.10.1.5
This attribute specifies how long to hold off retries following a release or the connection. The resolution is to the nearest 50 ms.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0 | 50..20000  

atmIfVptUniAcctOptTable 1.3.6.1.4.1.562.2.4.1.114.9.8.11
This group contains the provisionable attributes for accounting.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfVptUniAcctOptEntry

atmIfVptUniAcctOptEntry 1.3.6.1.4.1.562.2.4.1.114.9.8.11.1
An entry in the atmIfVptUniAcctOptTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtmIfVptUniAcctOptEntry  

atmIfVptUniAccountCollection 1.3.6.1.4.1.562.2.4.1.114.9.8.11.1.1
This attribute is used to turn accounting on or off for SVC and SPVC connections. It also specifies the reason(s) for which accounting data is collected: billing, test, study, audit or force. If the set of reasons is not empty then accounting records will be generated by this interface in the following situations: - on a TODA changeover if TODA is enabled; - every 12 hours (per connection) if TODA is disabled; - on every call clear (a call record with final cell counts). If none of the reasons is present, then accounting will be suppressed. The reason for collection is recorded in the accounting record, in the attribute callingCollectReason or calledCollectReason as appropriate. Description of bits: bill(0) test(1) study(2) audit(3) force(4)
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1)  

atmIfVptUniAccountConnectionType 1.3.6.1.4.1.562.2.4.1.114.9.8.11.1.2
This attribute specifies whether accounting records generated by this interface should be marked as originating, terminating or intermediate. This attribute, in combination with the direction of the call, determines the value of attribute connPointType of the accounting record and may be used by downstream accounting processes to correlate the records. If the value is origTerm then records generated for incoming calls will be marked as originating and records generated for outgoing calls will be marked as terminating. If the value is intermediate then records generated for all calls will be marked as intermediate.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER origTerm(0), intermediate(1)  

atmIfVptUniAccountClass 1.3.6.1.4.1.562.2.4.1.114.9.8.11.1.3
This attribute specifies the accounting class associated with the interface. Its meaning is determined by the network operator. Its value is simply recorded in the accounting records generated by this interface, in the attribute callingServiceType or calledServiceType as appropriate.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..255  

atmIfVptUniServiceExchange 1.3.6.1.4.1.562.2.4.1.114.9.8.11.1.4
This attribute specifies the data service exchange associated with this interface. Its meaning is determined by the network operator. Its value is simply recorded in the accounting records generated by this interface, in the attribute callingDse or calledDse as appropriate.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..255  

atmIfVptUniVProvTable 1.3.6.1.4.1.562.2.4.1.114.9.8.12
This group contains the provisionable attributes for the Uni component which are specific to virtual UNI interfaces.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfVptUniVProvEntry

atmIfVptUniVProvEntry 1.3.6.1.4.1.562.2.4.1.114.9.8.12.1
An entry in the atmIfVptUniVProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtmIfVptUniVProvEntry  

atmIfVptUniVpci 1.3.6.1.4.1.562.2.4.1.114.9.8.12.1.1
This attribute specifies the Virtual Path Connection Identifier (VPCI) to be used between this signalling entity and its peer. The VPCI of the peer virtual UNI must have the same value for switched connections to be set up across the interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..255  

atmIfVptUniSig 1.3.6.1.4.1.562.2.4.1.114.9.8.2
OBJECT IDENTIFIER    

atmIfVptUniSigRowStatusTable 1.3.6.1.4.1.562.2.4.1.114.9.8.2.1
This entry controls the addition and deletion of atmIfVptUniSig components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfVptUniSigRowStatusEntry

atmIfVptUniSigRowStatusEntry 1.3.6.1.4.1.562.2.4.1.114.9.8.2.1.1
A single entry in the table represents a single atmIfVptUniSig component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtmIfVptUniSigRowStatusEntry  

atmIfVptUniSigRowStatus 1.3.6.1.4.1.562.2.4.1.114.9.8.2.1.1.1
This variable is used as the basis for SNMP naming of atmIfVptUniSig components. These components cannot be added nor deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RowStatus  

atmIfVptUniSigComponentName 1.3.6.1.4.1.562.2.4.1.114.9.8.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

atmIfVptUniSigStorageType 1.3.6.1.4.1.562.2.4.1.114.9.8.2.1.1.4
This variable represents the storage type value for the atmIfVptUniSig tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

atmIfVptUniSigIndex 1.3.6.1.4.1.562.2.4.1.114.9.8.2.1.1.10
This variable represents the index for the atmIfVptUniSig tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

atmIfVptUniSigProvTable 1.3.6.1.4.1.562.2.4.1.114.9.8.2.10
This attribute group contains the provisionable attributes for the Signalling component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfVptUniSigProvEntry

atmIfVptUniSigProvEntry 1.3.6.1.4.1.562.2.4.1.114.9.8.2.10.1
An entry in the atmIfVptUniSigProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtmIfVptUniSigProvEntry  

atmIfVptUniSigVci 1.3.6.1.4.1.562.2.4.1.114.9.8.2.10.1.1
This attribute specifies the signalling channel number.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..65535  

atmIfVptUniSigAddressConversion 1.3.6.1.4.1.562.2.4.1.114.9.8.2.10.1.2
This attribute specifies the address conversion on the outgoing signalling PDUs. The options are none, nativeE164, or nsap. The none option is the default and if this option is chosen then nothing is done to the address information element (IE) in the outgoing signalling message. If nativeE164 option is chosen, then only NSAP encapsulated E.164 addresses with zeros in the ESI are converted to native E.164 format in the outgoing signalling message. If the NSAP address is not encapsulated E.164 or the ESI field is not zeros and the nativeE164 option is chosen, then the call is cleared. If the nsap option is chosen, then native E.164 addresses are converted to NSAP E.164 with zeros in the ESI field; otherwise the address is in NSAP format and is not changed.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(0), nativeE164(1), nsap(2)  

atmIfVptUniSigStateTable 1.3.6.1.4.1.562.2.4.1.114.9.8.2.11
This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfVptUniSigStateEntry

atmIfVptUniSigStateEntry 1.3.6.1.4.1.562.2.4.1.114.9.8.2.11.1
An entry in the atmIfVptUniSigStateTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtmIfVptUniSigStateEntry  

atmIfVptUniSigAdminState 1.3.6.1.4.1.562.2.4.1.114.9.8.2.11.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

atmIfVptUniSigOperationalState 1.3.6.1.4.1.562.2.4.1.114.9.8.2.11.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

atmIfVptUniSigUsageState 1.3.6.1.4.1.562.2.4.1.114.9.8.2.11.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

atmIfVptUniSigOperTable 1.3.6.1.4.1.562.2.4.1.114.9.8.2.12
This attribute contains the operational attributes for the AtmSignalling component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfVptUniSigOperEntry

atmIfVptUniSigOperEntry 1.3.6.1.4.1.562.2.4.1.114.9.8.2.12.1
An entry in the atmIfVptUniSigOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtmIfVptUniSigOperEntry  

atmIfVptUniSigLastTxCauseCode 1.3.6.1.4.1.562.2.4.1.114.9.8.2.12.1.1
This attribute indicates the cause code in the last transmitted signalling message that contains the CAUSE information element. The cause code is used to describe the reason for generating certain signalling messages.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..255  

atmIfVptUniSigLastTxDiagCode 1.3.6.1.4.1.562.2.4.1.114.9.8.2.12.1.2
This attribute contains the diagnostic code in the last transmitted signalling message. The diagnostic code is contained in the CAUSE information element and identifies an information element type or timer type. The diagnostic code is present only if a procedural error is detected by the signalling protocol. A diagnostic code is always accompanied by the cause code. If there is no failure, this attribute is set to 0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Hex 0..255  

atmIfVptUniSigLastRxCauseCode 1.3.6.1.4.1.562.2.4.1.114.9.8.2.12.1.3
This attribute contains the cause code in the last received signalling message that contains the CAUSE information element. The cause code is used to describe the reason for generating certain signalling messages.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Unsigned32 0..255  

atmIfVptUniSigLastRxDiagCode 1.3.6.1.4.1.562.2.4.1.114.9.8.2.12.1.4
This attribute contains the diagnostic code in the last received signalling message. The diagnostic code is contained in the CAUSE information element and identifies an information element type or timer type. The diagnostic code is present only if a procedural error is detected by the signalling protocol. A diagnostic code is always accompanied by the cause code. If there is no failure, this attribute is set to 0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Hex 0..255  

atmIfVptUniSigStatsTable 1.3.6.1.4.1.562.2.4.1.114.9.8.2.13
This attribute group contains the statistics associated with the AtmSignalling component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfVptUniSigStatsEntry

atmIfVptUniSigStatsEntry 1.3.6.1.4.1.562.2.4.1.114.9.8.2.13.1
An entry in the atmIfVptUniSigStatsTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtmIfVptUniSigStatsEntry  

atmIfVptUniSigCurrentConnections 1.3.6.1.4.1.562.2.4.1.114.9.8.2.13.1.1
This attribute indicates the total number of currently active connections.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter32  

atmIfVptUniSigPeakConnections 1.3.6.1.4.1.562.2.4.1.114.9.8.2.13.1.2
This attribute indicates the high water mark of active point-to- point and point-to-multipoint connections.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge32 0..4294967295  

atmIfVptUniSigSuccessfulConnections 1.3.6.1.4.1.562.2.4.1.114.9.8.2.13.1.3
This attribute counts the total number of switched point-to- point and point-to-multipoint connections that were successfully established. The counter wraps to 0 when the maximum value is exceeded.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

atmIfVptUniSigFailedConnections 1.3.6.1.4.1.562.2.4.1.114.9.8.2.13.1.4
This attribute counts the total number of switched connections that were not successfully established.The counter wraps to 0 when the maximum value is exceeded.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

atmIfVptUniSigTxPdus 1.3.6.1.4.1.562.2.4.1.114.9.8.2.13.1.5
This attribute counts the number of transmitted signalling PDUs.The counter wraps to 0 when the maximum value is exceeded.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

atmIfVptUniSigRxPdus 1.3.6.1.4.1.562.2.4.1.114.9.8.2.13.1.6
This attribute counts the number of received signalling PDUs.The counter wraps to 0 when the maximum value is exceeded.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

atmIfVptUniSigCurrentPmpConnections 1.3.6.1.4.1.562.2.4.1.114.9.8.2.13.1.7
This attribute indicates the number of currently active point-to- multipoint connections.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge32 0..4294967295  

atmIfVptUniSigPeakPmpConnections 1.3.6.1.4.1.562.2.4.1.114.9.8.2.13.1.8
This attribute indicates the high water mark of active point-to- multipoint connections.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge32 0..4294967295  

atmIfVptUniSigSuccessfulPmpConnections 1.3.6.1.4.1.562.2.4.1.114.9.8.2.13.1.9
This attribute counts the total number of switched point-to- multipoint connections that were successfully established. The counter wraps to 0 when the maximum value is exceeded.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

atmIfVptUniSigFailedPmpConnections 1.3.6.1.4.1.562.2.4.1.114.9.8.2.13.1.10
This attribute counts the number of switched point-to- multipoint connections that were not successfully established.The counter wraps to 0 when the maximum value is exceeded.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter32  

atmIfVptUniSigNewCurrentConnections 1.3.6.1.4.1.562.2.4.1.114.9.8.2.13.1.11
This attribute indicates the total number of currently active point-to- point and point-to-multipoint connections.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge32 0..4294967295  

atmIfVptUniSigVcd 1.3.6.1.4.1.562.2.4.1.114.9.8.2.2
OBJECT IDENTIFIER    

atmIfVptUniSigVcdRowStatusTable 1.3.6.1.4.1.562.2.4.1.114.9.8.2.2.1
This entry controls the addition and deletion of atmIfVptUniSigVcd components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfVptUniSigVcdRowStatusEntry

atmIfVptUniSigVcdRowStatusEntry 1.3.6.1.4.1.562.2.4.1.114.9.8.2.2.1.1
A single entry in the table represents a single atmIfVptUniSigVcd component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtmIfVptUniSigVcdRowStatusEntry  

atmIfVptUniSigVcdRowStatus 1.3.6.1.4.1.562.2.4.1.114.9.8.2.2.1.1.1
This variable is used as the basis for SNMP naming of atmIfVptUniSigVcd components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

atmIfVptUniSigVcdComponentName 1.3.6.1.4.1.562.2.4.1.114.9.8.2.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

atmIfVptUniSigVcdStorageType 1.3.6.1.4.1.562.2.4.1.114.9.8.2.2.1.1.4
This variable represents the storage type value for the atmIfVptUniSigVcd tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

atmIfVptUniSigVcdIndex 1.3.6.1.4.1.562.2.4.1.114.9.8.2.2.1.1.10
This variable represents the index for the atmIfVptUniSigVcd tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

atmIfVptUniSigVcdProvTable 1.3.6.1.4.1.562.2.4.1.114.9.8.2.2.10
This group contains the provisionable traffic attributes for a control channel.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfVptUniSigVcdProvEntry

atmIfVptUniSigVcdProvEntry 1.3.6.1.4.1.562.2.4.1.114.9.8.2.2.10.1
An entry in the atmIfVptUniSigVcdProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtmIfVptUniSigVcdProvEntry  

atmIfVptUniSigVcdTrafficDescType 1.3.6.1.4.1.562.2.4.1.114.9.8.2.2.10.1.1
This attribute specifies the type of traffic management which is applied to both the transmit and receive direction of this connection as defined in the ATM Forum. The trafficDescType determines the number and meaning of the parameters in the trafficDescParm attribute.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER n3(3), n6(6), n7(7), n8(8)  

atmIfVptUniSigVcdAtmServiceCategory 1.3.6.1.4.1.562.2.4.1.114.9.8.2.2.10.1.3
This attribute specifies the ATM service category for both directions of the connection. The constantBitRate service category is intended for real time applications, that is those requiring tightly constrained delay and delay variation, as would be appropriate for voice and video applications. The consistent availability of a fixed quantity of bandwidth is considered appropriate for CBR service. Cells which are delayed beyond the value specified by CellTransfer Delay are assumed to be of significantly reduce value to the application. The rtVariableBitRate service category is intended for real time applications, that is those requiring tightly constrained delay and delay variation, as would be appropriate for voice and video applications. Sources are expected to transmit at a rate which varies with time. Equivalently, the source can be described as 'bursty'. Cells which are delayed beyond the value specified by CTD are assumed to be of significantly reduced value to the application. Real time VBR service may support statistical multiplexing of real time sources. The nrtVariableBitRate service category is intended for non-real time applications which have bursty traffic characteristics and which can be characterized in terms of a PCR, SCR, and MBS. For those cells which are transferred within the traffic contract, the application expects a low cell loss ratio. For all connections, it expects a bound on the mean cell transfer delay. Non-real time VBR service may support statistical multiplexing of connections. The unspecifiedBitRate service is intended for non-real time applications; that is, those not requiring tightly constrained delay and delay variation. UBR sources are expected to be bursty. UBR service supports a high degree of statistical multiplexing among sources. UBR service does not specify traffic related service guarantees. No numerical commitments are made with respect to the cell loss ratio experienced by a UBR connection, or as to the cell transfer delay experienced by cells on the connection.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER unspecifiedBitRate(0), constantBitRate(1), rtVariableBitRate(2), nrtVariableBitRate(3)  

atmIfVptUniSigVcdQosClass 1.3.6.1.4.1.562.2.4.1.114.9.8.2.2.10.1.21
This attribute specifies the quality of service for both the forward and backward direction for this connection. Class 1 supports a QOS that meets Service Class A performance requirements (Circuit emulation, constant bit rate video). Class 2 supports a QOS that meets Service Class B performance requirements (Variable bit rate audio and video). Class 3 supports a QOS that meets Service Class C performance requirements (Connection-Oriented Data Transfer). Class 4 supports a QOS that meets Service Class D performance requirements (Connectionless Data Transfer). Class 0 is the unspecified bit rate QOS class; no objective is specified for the performance parameters.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER n0(0), n1(1), n2(2), n3(3), n4(4)  

atmIfVptUniSigVcdTrafficShaping 1.3.6.1.4.1.562.2.4.1.114.9.8.2.2.10.1.50
This attribute specifies whether this connection uses traffic shaping when transmitting traffic to the ATM interface. When sameAsCa is selected, traffic shaping for this connection is based on the trafficShaping attribute of the connection's service category component under the AtmIf CA. If the service category has traffic shaping enabled, then traffic shaping is enabled for the connection. Note that enabling traffic shaping may have no effect under certain cases. These cases are listed in the description of the trafficShaping operational attribute, which is under the Vcc Tm and Vpc Tm components. When disabled is selected, traffic shaping for this connection is disabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), sameAsCa(2)  

atmIfVptUniSigVcdUnshapedTransmitQueueing 1.3.6.1.4.1.562.2.4.1.114.9.8.2.2.10.1.60
This attribute only applies when this connection is unshaped. This attribute specifies the transmit queueing method for this connection if it is unshaped. Refer to the unshapedTransmitQueueing attribute under the AtmIf CA service category subcomponent for more details on the meaning of this attribute. When this attribute is set to sameAsCa, the transmit queueing method for the connection is based on the unshapedTransmitQueueing attribute of the connection's service category component under the ConnectionAdministrator. When this attribute is set to common, transmit traffic on this unshaped connection is destined for the common queue. The value sameAsInterface is for migration from previous software releases, but should no longer be used
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER common(1), sameAsCa(3)  

atmIfVptUniSigVcdUsageParameterControl 1.3.6.1.4.1.562.2.4.1.114.9.8.2.2.10.1.70
This attribute specifies whether this connection enforces usage parameter control when receiving traffic from the ATM interface. When sameAsCa is selected, UPC for the connection is based on the usageParameterControl attribute of the connection's service category component under the ConnectionAdministrator. If the service category has UPC enabled, then UPC is enabled for the connection. Note that enabling UPC may have no effect under certain cases. These cases are listed in the description of the usageParameterControl operational attribute, which is under the Vcc Tm or Vpc Tm component. When disabled is selected, UPC for this connection is disabled. The value sameAsInterface is for migration from previous software releases, but should no longer be used
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), sameAsCa(2)  

atmIfVptUniSigVcdTdpTable 1.3.6.1.4.1.562.2.4.1.114.9.8.2.2.387
This attribute is a vector of five traffic parameters whose meanings are defined by the trafficDescType attribute. The values of peak cell rate (PCR), sustained cell rate (SCR) and requested shaping rate are expressed in cell/s. Maximum burst size (MBS) is expressed in cells. CDVT is expressed in microseconds. The values of PCR, SCR, MBS and CDVT are used for connection admission control (CAC). The value of CDVT is only used for connections where the atmServiceCategory is constantBitRate. For all other values of atmServiceCategory, CDVT is ignored. The values of PCR, SCR and requested shaping rate are used to determine the actual shaping rate where traffic shaping is enabled. When trafficDescType is 3, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 4 represents the CDVT; and parameter 5 represents the requested shaping rate. A non-zero value in parameter 5 overrides any value in parameter 1. This result is used as the PCR. Parameter 1 must be non-zero. Parameters 2 and 3 must be zero. When trafficDescType is 6, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP equal to 0 and 1 traffic; parameter 3 represents the MBS for CLP equal to 0 and 1 traffic; parameter 4 represents the CDVT; and parameter 5 represents the requested shaping rate. A non-zero value in parameter 5 overrides any value in parameter 1. This result is used as the PCR. Parameters 1, 2, and 3 must be non-zero. Parameter 1 must be greater than or equal to parameter 2. Parameter 5 must either be zero (unused) or greater than or equal to parameter 2. When trafficDescType is 7, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP equal to 0 with cell discard; parameter 3 represents the MBS for CLP equal to 0 traffic; parameter 4 represents the CDVT; and parameter 5 represents the requested shaping rate. A non-zero value in parameter 5 overrides any value in parameter 1. This result is used as the PCR. Parameters 1, 2, and 3 must be non-zero. Parameter 1 must be greater than or equal to parameter 2. Parameter 5 must either be zero (unused) or greater than or equal to parameter 2. When trafficDescType is 8, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP equal to 0 traffic with cell tagging; parameter 3 represents the MBS for CLP equal to 0 traffic; parameter 4 represents the CDVT; and parameter 5 represents the requested shaping rate. A non-zero value in parameter 5 overrides any value in parameter 1. This result is used as the PCR. Parameters 1, 2, and 3 must be non-zero. Parameter 1 must be greater than or equal to parameter 2. Parameter 5 must either be zero (unused) or greater than or equal to parameter 2. Whenever it is valid for PCR to be specified, parameter 5 may also be used to specify a requested shaping rate. A non-zero value in parameter 5 overrides the value in parameter 1 and is used as the peak cell rate in calculations of CAC and shaping rate. For trafficDescType 3 the traffic is shaped at the next rate less than the PCR. For trafficDescType 6, 7, and 8, the traffic is shaped at the highest available rate which is between PCR and SCR. However, if there is no available shaping rate between PCR and SCR, traffic is shaped at the next rate above the PCR.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfVptUniSigVcdTdpEntry

atmIfVptUniSigVcdTdpEntry 1.3.6.1.4.1.562.2.4.1.114.9.8.2.2.387.1
An entry in the atmIfVptUniSigVcdTdpTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtmIfVptUniSigVcdTdpEntry  

atmIfVptUniSigVcdTdpIndex 1.3.6.1.4.1.562.2.4.1.114.9.8.2.2.387.1.1
This variable represents the atmIfVptUniSigVcdTdpTable specific index for the atmIfVptUniSigVcdTdpTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Integer32 1..5  

atmIfVptUniSigVcdTdpValue 1.3.6.1.4.1.562.2.4.1.114.9.8.2.2.387.1.2
This variable represents an individual value for the atmIfVptUniSigVcdTdpTable.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Unsigned32 0..2147483647  

atmIfVptUniAddr 1.3.6.1.4.1.562.2.4.1.114.9.8.3
OBJECT IDENTIFIER    

atmIfVptUniAddrRowStatusTable 1.3.6.1.4.1.562.2.4.1.114.9.8.3.1
This entry controls the addition and deletion of atmIfVptUniAddr components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfVptUniAddrRowStatusEntry

atmIfVptUniAddrRowStatusEntry 1.3.6.1.4.1.562.2.4.1.114.9.8.3.1.1
A single entry in the table represents a single atmIfVptUniAddr component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtmIfVptUniAddrRowStatusEntry  

atmIfVptUniAddrRowStatus 1.3.6.1.4.1.562.2.4.1.114.9.8.3.1.1.1
This variable is used as the basis for SNMP naming of atmIfVptUniAddr components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

atmIfVptUniAddrComponentName 1.3.6.1.4.1.562.2.4.1.114.9.8.3.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

atmIfVptUniAddrStorageType 1.3.6.1.4.1.562.2.4.1.114.9.8.3.1.1.4
This variable represents the storage type value for the atmIfVptUniAddr tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

atmIfVptUniAddrAddressIndex 1.3.6.1.4.1.562.2.4.1.114.9.8.3.1.1.10
This variable represents an index for the atmIfVptUniAddr tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AsciiStringIndex Size(1..40)  

atmIfVptUniAddrAddressTypeIndex 1.3.6.1.4.1.562.2.4.1.114.9.8.3.1.1.11
This variable represents an index for the atmIfVptUniAddr tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER primary(0), alternate(1), registered(2), default(3)  

atmIfVptUniAddrOperTable 1.3.6.1.4.1.562.2.4.1.114.9.8.3.10
This attribute group contains the operational attributes for the Address component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfVptUniAddrOperEntry

atmIfVptUniAddrOperEntry 1.3.6.1.4.1.562.2.4.1.114.9.8.3.10.1
An entry in the atmIfVptUniAddrOperTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtmIfVptUniAddrOperEntry  

atmIfVptUniAddrScope 1.3.6.1.4.1.562.2.4.1.114.9.8.3.10.1.1
This attribute indicates the scope of the ATM address, which is the highest level to which this address will be advertised in the PNNI hierarchy. If no PnniInfo subcomponent has been provisioned, then the scope will default to the level of this node in the PNNI hierarchy. If this node does not participate in a PNNI hierarchy, then this attribute will have the value of -1.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER -1..104  

atmIfVptUniAddrReachability 1.3.6.1.4.1.562.2.4.1.114.9.8.3.10.1.2
This attribute indicates whether the address is internal or exterior. An internal reachable address is an address of a destination that is directly attached to the logical node advertising the address. An exterior reachable address is an address that can be reached through a PNNI routing domain, but which is not located in that PNNI routing domain.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER internal(0), exterior(1)  

atmIfVptUniAddrTermSP 1.3.6.1.4.1.562.2.4.1.114.9.8.3.2
OBJECT IDENTIFIER    

atmIfVptUniAddrTermSPRowStatusTable 1.3.6.1.4.1.562.2.4.1.114.9.8.3.2.1
This entry controls the addition and deletion of atmIfVptUniAddrTermSP components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfVptUniAddrTermSPRowStatusEntry

atmIfVptUniAddrTermSPRowStatusEntry 1.3.6.1.4.1.562.2.4.1.114.9.8.3.2.1.1
A single entry in the table represents a single atmIfVptUniAddrTermSP component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtmIfVptUniAddrTermSPRowStatusEntry  

atmIfVptUniAddrTermSPRowStatus 1.3.6.1.4.1.562.2.4.1.114.9.8.3.2.1.1.1
This variable is used as the basis for SNMP naming of atmIfVptUniAddrTermSP components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

atmIfVptUniAddrTermSPComponentName 1.3.6.1.4.1.562.2.4.1.114.9.8.3.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

atmIfVptUniAddrTermSPStorageType 1.3.6.1.4.1.562.2.4.1.114.9.8.3.2.1.1.4
This variable represents the storage type value for the atmIfVptUniAddrTermSP tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

atmIfVptUniAddrTermSPIndex 1.3.6.1.4.1.562.2.4.1.114.9.8.3.2.1.1.10
This variable represents the index for the atmIfVptUniAddrTermSP tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

atmIfVptUniAddrPnniInfo 1.3.6.1.4.1.562.2.4.1.114.9.8.3.3
OBJECT IDENTIFIER    

atmIfVptUniAddrPnniInfoRowStatusTable 1.3.6.1.4.1.562.2.4.1.114.9.8.3.3.1
This entry controls the addition and deletion of atmIfVptUniAddrPnniInfo components.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfVptUniAddrPnniInfoRowStatusEntry

atmIfVptUniAddrPnniInfoRowStatusEntry 1.3.6.1.4.1.562.2.4.1.114.9.8.3.3.1.1
A single entry in the table represents a single atmIfVptUniAddrPnniInfo component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtmIfVptUniAddrPnniInfoRowStatusEntry  

atmIfVptUniAddrPnniInfoRowStatus 1.3.6.1.4.1.562.2.4.1.114.9.8.3.3.1.1.1
This variable is used as the basis for SNMP naming of atmIfVptUniAddrPnniInfo components. These components can be added and deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

atmIfVptUniAddrPnniInfoComponentName 1.3.6.1.4.1.562.2.4.1.114.9.8.3.3.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

atmIfVptUniAddrPnniInfoStorageType 1.3.6.1.4.1.562.2.4.1.114.9.8.3.3.1.1.4
This variable represents the storage type value for the atmIfVptUniAddrPnniInfo tables.
Status: mandatory Access: read-only
OBJECT-TYPE    
  StorageType  

atmIfVptUniAddrPnniInfoIndex 1.3.6.1.4.1.562.2.4.1.114.9.8.3.3.1.1.10
This variable represents the index for the atmIfVptUniAddrPnniInfo tables.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  NonReplicated  

atmIfVptUniAddrPnniInfoProvTable 1.3.6.1.4.1.562.2.4.1.114.9.8.3.3.10
This attribute group contains the provisioned attributes relating to PNNI for a PnniInfo component.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfVptUniAddrPnniInfoProvEntry

atmIfVptUniAddrPnniInfoProvEntry 1.3.6.1.4.1.562.2.4.1.114.9.8.3.3.10.1
An entry in the atmIfVptUniAddrPnniInfoProvTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AtmIfVptUniAddrPnniInfoProvEntry  

atmIfVptUniAddrPnniInfoScope 1.3.6.1.4.1.562.2.4.1.114.9.8.3.3.10.1.1
This attribute specifies the scope of the ATM address, which is the highest level up to which this address will be advertised in the PNNI hierarchy. The scope must be set to a value numerically less than or equal to the level of the lowest level peer group containing this node. Setting the scope to 0 will cause the address to be advertised globally within this PNNI routing domain.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER -1..104  

atmIfVptUniAddrPnniInfoReachability 1.3.6.1.4.1.562.2.4.1.114.9.8.3.3.10.1.2
This attribute indicates whether the address is internal or exterior. An internal reachable address is an address of a destination that is directly attached to the logical node advertising the address. An exterior reachable address is an address that can be reached through a PNNI routing domain, but which is not located in that PNNI routing domain.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER internal(0), exterior(1)  

atmUniGroup 1.3.6.1.4.1.562.2.4.2.69.1
OBJECT IDENTIFIER    

atmUniGroupBE 1.3.6.1.4.1.562.2.4.2.69.1.5
OBJECT IDENTIFIER    

atmUniGroupBE00 1.3.6.1.4.1.562.2.4.2.69.1.5.1
OBJECT IDENTIFIER    

atmUniGroupBE00A 1.3.6.1.4.1.562.2.4.2.69.1.5.1.2
OBJECT IDENTIFIER    

atmUniCapabilities 1.3.6.1.4.1.562.2.4.2.69.3
OBJECT IDENTIFIER    

atmUniCapabilitiesBE 1.3.6.1.4.1.562.2.4.2.69.3.5
OBJECT IDENTIFIER    

atmUniCapabilitiesBE00 1.3.6.1.4.1.562.2.4.2.69.3.5.1
OBJECT IDENTIFIER    

atmUniCapabilitiesBE00A 1.3.6.1.4.1.562.2.4.2.69.3.5.1.2
OBJECT IDENTIFIER    

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor