NORTEL-WLAN-AP-MIB

File: NORTEL-WLAN-AP-MIB.mib (69591 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC IF-MIB
SYNOPTICS-ROOT-MIB

Imported symbols

MODULE-IDENTITY OBJECT-TYPE Integer32
IpAddress NOTIFICATION-TYPE Counter32
DisplayString TruthValue PhysAddress
RowStatus MacAddress TEXTUAL-CONVENTION
ifIndex InterfaceIndex ifPhysAddress
wlan2200

Defined Types

NtWlanApDataRate  
A data rate, measured in increments of 500Kb/s from 1 Mb/s to 63.5 Mb/s. For example, a value of 2 means a data rate of 1 Mb/s, while a value of 5 means a data rate of 2.5 Mb/s.
TEXTUAL-CONVENTION    
  Integer32 2..127  

NtWlanApWEPKey  
A WEP key. Valid sizes are 5, 13, and 16 octets, corresponding to WEP key lengths of 64, 128, and 152 bits, respectively. A length of 0 is also allowed, so that retrieval of objects containing a valid key value can return an empty string so as to avoid key disclosure.
TEXTUAL-CONVENTION    
  OCTET STRING Size(0|5|13|16)  

NtWlanLineEntry  
SEQUENCE    
  ntWlanLineIndex Integer32
  ntWlanLineDataBits Integer32
  ntWlanLineParity INTEGER
  ntWlanLineSpeed Integer32
  ntWlanLineStopBits Integer32

NtWlanPortEntry  
SEQUENCE    
  ntWlanPortIndex InterfaceIndex
  ntWlanPortName DisplayString
  ntWlanPortType INTEGER
  ntWlanPortSpeedDpxCfg INTEGER
  ntWlanPortFlowCtrlCfg INTEGER
  ntWlanPortCapabilities INTEGER
  ntWlanPortAutonegotiation INTEGER
  ntWlanPortSpeedDpxStatus INTEGER
  ntWlanPortFlowCtrlStatus INTEGER

NtWlanDot11PhyOperationEntry  
SEQUENCE    
  ntWlanDot11Index Integer32
  ntWlanDot11TurboModeEnabled INTEGER
  ntWlanDot11PreambleLength INTEGER
  ntWlanDot11dWorldModeEnabled TruthValue
  ntWlanDot11ClosedSystem TruthValue

NtWlanDot11AuthenticationServerEntry  
SEQUENCE    
  ntWlanDot11ServerIndex Integer32
  ntWlanDot11AuthenticationServer IpAddress
  ntWlanDot11AuthenticationPort INTEGER
  ntWlanDot11AuthenticationKey DisplayString
  ntWlanDot11AuthenticationRetransmit INTEGER
  ntWlanDot11AuthenticationTimeout INTEGER
  ntWlanDot11SecondaryAuthServer IpAddress
  ntWlanDot11SecondaryAuthPort INTEGER
  ntWlanDot11SecondaryAuthKey DisplayString
  ntWlanDot11SecondaryAuthRetransmit INTEGER
  ntWlanDot11SecondaryAuthTimeout INTEGER

NtWlanDot11FilterEntry  
SEQUENCE    
  ntWlanDot11FilterIndex Integer32
  ntWlanDot11FilterAddress PhysAddress
  ntWlanDot11FilterStatus INTEGER

NtWlanDot11TrapEntry  
SEQUENCE    
  ntWlanDot11InterfaceIndex Integer32
  ntWlanDot11AssociationStationAddress PhysAddress
  ntWlanDot11DisassociationStationAddress PhysAddress
  ntWlanDot11AssociationMU INTEGER

NtWlanApRateSupportEntry  
SEQUENCE    
  ntWlanApRateSupportIfIndex InterfaceIndex
  ntWlanApRateSupportSpeed NtWlanApDataRate
  ntWlanApRateSupportLevel INTEGER

NtWlanApSecurityEntry  
SEQUENCE    
  ntWlanApSecurityIfIndex InterfaceIndex
  ntWlanApSecurityEnabled TruthValue
  ntWlanApSecurityWEPAuthType INTEGER
  ntWlanApSecurityWEPKeyLength INTEGER
  ntWlanApSecurityWEPActiveKey Integer32
  ntWlanApSecurityWEPKey1 NtWlanApWEPKey
  ntWlanApSecurityWEPKey2 NtWlanApWEPKey
  ntWlanApSecurityWEPKey3 NtWlanApWEPKey
  ntWlanApSecurityWEPKey4 NtWlanApWEPKey
  ntWlanApSecurityWPASupport INTEGER
  ntWlanApSecurityWPAMode INTEGER
  ntWlanApSecurityWPAPreSharedKey OCTET STRING
  ntWlanApSecurityWPAMcastCypherMode INTEGER

NtWlanApQoSEtherTypeToQueueEntry  
SEQUENCE    
  ntWlanApQoSEtherTypeToQueueIndex Integer32
  ntWlanApQoSEtherTypeToQueueNumber Integer32
  ntWlanApQoSEtherTypeToQueueRowStatus RowStatus

NtWlanApQoSMACToQueueEntry  
SEQUENCE    
  ntWlanApQoSMACToQueueAddress MacAddress
  ntWlanApQoSMACToQueueNumber Integer32
  ntWlanApQoSMACToQueueRowStatus RowStatus

NtWlanApVlanEntry  
SEQUENCE    
  ntWlanApVlanIfIndex InterfaceIndex
  ntWlanApVlanDefaultVid Integer32

NtWlanApVlanMUMACToVidEntry  
SEQUENCE    
  ntWlanApVlanMUMACToVidAddress MacAddress
  ntWlanApVlanMUMACToVidNumber Integer32

NtWlanApMUStatsEntry  
SEQUENCE    
  ntWlanApMUStatsMUAddress MacAddress
  ntWlanApMUStatsPacketsIn Counter32
  ntWlanApMUStatsPacketsOut Counter32
  ntWlanApMUStatsOctetsIn Counter32
  ntWlanApMUStatsOctetsOut Counter32

Defined Values

nortelWlanApMib 1.3.6.1.4.1.45.1.11.1
Nortel Wireless LAN AP MIB Copyright 2003-2004 Nortel Networks, Inc. All rights reserved. This Nortel Networks SNMP Management Information Base Specification (Specification) embodies Nortel Networks' confidential and proprietary intellectual property. Nortel Networks retains all title and ownership in the Specification, including any revisions. This Specification is supplied 'AS IS,' and Nortel Networks makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification.
MODULE-IDENTITY    

ntWlanApSys 1.3.6.1.4.1.45.1.11.1.1
OBJECT IDENTIFIER    

ntWlanApLineMgnt 1.3.6.1.4.1.45.1.11.1.2
OBJECT IDENTIFIER    

ntWlanApPortMgnt 1.3.6.1.4.1.45.1.11.1.3
OBJECT IDENTIFIER    

ntWlanApFileTransferMgt 1.3.6.1.4.1.45.1.11.1.4
OBJECT IDENTIFIER    

ntWlanApResetMgt 1.3.6.1.4.1.45.1.11.1.5
OBJECT IDENTIFIER    

ntWlanApIpMgt 1.3.6.1.4.1.45.1.11.1.6
OBJECT IDENTIFIER    

ntWlanApDot11 1.3.6.1.4.1.45.1.11.1.7
OBJECT IDENTIFIER    

ntWlanApTraps 1.3.6.1.4.1.45.1.11.1.8
OBJECT IDENTIFIER    

ntWlanApLID 1.3.6.1.4.1.45.1.11.1.9
OBJECT IDENTIFIER    

ntWlanApRateSupport 1.3.6.1.4.1.45.1.11.1.10
OBJECT IDENTIFIER    

ntWlanApSecurity 1.3.6.1.4.1.45.1.11.1.11
OBJECT IDENTIFIER    

ntWlanApQoS 1.3.6.1.4.1.45.1.11.1.12
OBJECT IDENTIFIER    

ntWlanApVlan 1.3.6.1.4.1.45.1.11.1.13
OBJECT IDENTIFIER    

ntWlanApStats 1.3.6.1.4.1.45.1.11.1.14
OBJECT IDENTIFIER    

ntWlanSwHardwareVer 1.3.6.1.4.1.45.1.11.1.1.1
Hardware version of the main board.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..20)  

ntWlanSwBootRomVer 1.3.6.1.4.1.45.1.11.1.1.2
Boot ROM code version of the main board.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..20)  

ntWlanSwOpCodeVer 1.3.6.1.4.1.45.1.11.1.1.3
Operation code version of the main board.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..20)  

ntWlanSwCountryCode 1.3.6.1.4.1.45.1.11.1.1.4
Country code of the AP. AL-ALBANIA, DZ-ALGERIA, AR-ARGENTINA, AM-ARMENIA, AU-AUSTRALIA, AT-AUSTRIA, AZ-AZERBAIJAN, BH-BAHRAIN, BY-BELARUS, BE-BELGIUM, BZ-BELIZE, BO-BOLVIA, BR-BRAZIL, BN-BRUNEI_DARUSSALAM, BG-BULGARIA, CA-CANADA, CL-CHILE, CN-CHINA, CO-COLOMBIA, CR-COSTA_RICA, HR-CROATIA, CY-CYPRUS, CZ-CZECH_REPUBLIC, DK-DENMARK, DO-DOMINICAN_REPUBLIC, EC-ECUADOR, EG-EGYPT, EE-ESTONIA, FI-FINLAND, FR-FRANCE, GE-GEORGIA, DE-GERMANY, GR-GREECE, GT-GUATEMALA, HK-HONG_KONG, HU-HUNGARY, IS-ICELAND, IN-INDIA, ID-INDONESIA, IR-IRAN, IE-IRELAND, IL-ISRAEL, IT-ITALY, JP-JAPAN, JO-JORDAN, KZ-KAZAKHSTAN, KP-NORTH_KOREA, KR-KOREA_REPUBLIC, KW-KUWAIT, LV-LATVIA, LB-LEBANON, LI-LIECHTENSTEIN, LT-LITHUANIA, LU-LUXEMBOURG, MO-MACAU, MK-MACEDONIA, MY-MALAYSIA, MX-MEXICO, MC-MONACO, MA-MOROCCO, NL-NETHERLANDS, NZ-NEW_ZEALAND, NO-NORWAY, OM-OMAN, PK-PAKISTAN, PA-PANAMA, PE-PERU, PH-PHILIPPINES, PL-POLAND, PT-PORTUGAL, PR-PUERTO_RICO, QA-QATAR, RO-ROMANIA, RU-RUSSIA, SA-SAUDI_ARABIA, SG-SINGAPORE, SK-SLOVAK_REPUBLIC, SI-SLOVENIA, ZA-SOUTH_AFRICA, ES-SPAIN, SE-SWEDEN, CH-SWITZERLAND, SY-SYRIA, TW-TAIWAN, TH-THAILAND, TR-TURKEY, UA-UKRAINE, AE-UNITED_ARAB_EMIRATES, GB-UNITED_KINGDOM, US-UNITED_STATES, UY-URUGUAY, VE-VENEZUELA, VN-VIETNAM
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(2)  

ntWlanSwNNDataFileVer 1.3.6.1.4.1.45.1.11.1.1.5
Nortel Networks Customization Data File Version.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..20)  

ntWlanLineTable 1.3.6.1.4.1.45.1.11.1.2.1
Table of descriptive and status information about configuration of each RS-232 line in this system
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NtWlanLineEntry

ntWlanLineEntry 1.3.6.1.4.1.45.1.11.1.2.1.1
An entry in the table, containing information about configuration in one RS232 line of the Access Point.
Status: current Access: not-accessible
OBJECT-TYPE    
  NtWlanLineEntry  

ntWlanLineIndex 1.3.6.1.4.1.45.1.11.1.2.1.1.1
This is defined as RS-232 index.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..2147483647  

ntWlanLineDataBits 1.3.6.1.4.1.45.1.11.1.2.1.1.2
This is defined as number of data bits for the RS232 interface.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ntWlanLineParity 1.3.6.1.4.1.45.1.11.1.2.1.1.3
This is defined as parity of the RS232 interface.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER none(99), odd(1), even(2)  

ntWlanLineSpeed 1.3.6.1.4.1.45.1.11.1.2.1.1.4
This is defined as the speed of the RS-232 interface.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ntWlanLineStopBits 1.3.6.1.4.1.45.1.11.1.2.1.1.5
This is defined as the number of stop bits for the RS-232 interface.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

ntWlanPortTable 1.3.6.1.4.1.45.1.11.1.3.1
Table of descriptive and status information about configuration of each switch port (including expansion slot) in this system. This table also contains information about each trunk (similar to Cisco's EtherChannel).
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NtWlanPortEntry

ntWlanPortEntry 1.3.6.1.4.1.45.1.11.1.3.1.1
An entry in the table, containing information about configuration in one switch port of the switch.
Status: current Access: not-accessible
OBJECT-TYPE    
  NtWlanPortEntry  

ntWlanPortIndex 1.3.6.1.4.1.45.1.11.1.3.1.1.1
This is defined as ifIndex in the IF-MIB.
Status: current Access: not-accessible
OBJECT-TYPE    
  InterfaceIndex  

ntWlanPortName 1.3.6.1.4.1.45.1.11.1.3.1.1.2
Indicates the port name. This is same as ifAlias in the IF-MIB (RFC2863 or later).
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..64)  

ntWlanPortType 1.3.6.1.4.1.45.1.11.1.3.1.1.3
Indicates the port type.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER other(1), hundredBaseTX(2), hundredBaseFX(3), thousandBaseSX(4), thousandBaseLX(5), thousandBaseT(6), thousandBaseGBIC(7), thousandBaseMiniGBIC(8)  

ntWlanPortSpeedDpxCfg 1.3.6.1.4.1.45.1.11.1.3.1.1.4
Set the port speed and duplex mode as follows: halfDuplex10(2) - 10Mbps and half duplex mode fullDuplex10(3) - 10Mbps and full duplex mode halfDuplex100(4) - 100Mbps and half duplex mode fullDuplex100(5) - 100Mbps and full duplex mode halfDuplex1000(6) - 1000Mbps and half duplex mode fullDuplex1000(7) - 1000Mbps and full duplex mode hundredBaseTX port can be set as halfDuplex10(2) fullDuplex10(3) halfDuplex100(4) fullDuplex100(5) hundredBaseFX port can be set as halfDuplex100(4) fullDuplex100(5) thousandBaseSX port can be set as halfDuplex1000(6) fullDuplex1000(7) The actual operating speed and duplex of the port is given by portSpeedDpxStatus.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER reserved(1), halfDuplex10(2), fullDuplex10(3), halfDuplex100(4), fullDuplex100(5), halfDuplex1000(6), fullDuplex1000(7)  

ntWlanPortFlowCtrlCfg 1.3.6.1.4.1.45.1.11.1.3.1.1.5
(1) Flow control mechanism is enabled. If the port type is hundredBaseTX or thousandBaseSX: When the port is operating in halfDuplex mode, the port uses backPressure flow control mechanism. When the port is operating in fullDuplex mode, the port uses IEEE 802.3x flow control mechanism. If the port type is hundredBaseFX: When the port is operating in halfDuplex mode, the port uses backPressure flow control mechanism. When the port is operating in fullDuplex mode, Flow control mechanism will not function. (2) Flow control mechanism is disabled. (3) Flow control mechanism is backPressure. when the port is in fullDuplex mode.This flow control mechanism will not function. (4) Flow control mechanism is IEEE 802.3x flow control. when the port is in halfDuplex mode.This flow control mechanism will not function. hundredBaseTX and thousandBaseSX port can be set as: enabled(1), disabled(2), backPressure(3), dot3xFlowControl(4). hundredBaseFX port can be set as: enabled(1), disabled(2), backPressure(3). The actual flow control mechanism is used given by portFlowCtrlStatus.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2), backPressure(3), dot3xFlowControl(4)  

ntWlanPortCapabilities 1.3.6.1.4.1.45.1.11.1.3.1.1.6
Port capabilities.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER portCap10half(99), portCap10full(1), portCap100half(2), portCap100full(3), portCap1000half(4), portCap1000full(5), reserved6(6), reserved7(7), reserved8(8), reserved9(9), reserved10(10), reserved11(11), reserved12(12), reserved13(13), portCapSym(14), portCapFlowCtrl(15)  

ntWlanPortAutonegotiation 1.3.6.1.4.1.45.1.11.1.3.1.1.7
Whether autonegotiation is enabled.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

ntWlanPortSpeedDpxStatus 1.3.6.1.4.1.45.1.11.1.3.1.1.8
The operating speed and duplex mode of the switched port. If this index is a trunk, the speed is the speed of its individual members. If this index is a trunk and the result is inconsistent among its member ports, this value is error(1).
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER error(1), halfDuplex10(2), fullDuplex10(3), halfDuplex100(4), fullDuplex100(5), halfDuplex1000(6), fullDuplex1000(7)  

ntWlanPortFlowCtrlStatus 1.3.6.1.4.1.45.1.11.1.3.1.1.9
(2) BackPressure flow control machanism is used. (3) IEEE 802.3 flow control machanism is used. (4) Flow control mechanism is disabled. If this index is a trunk and the result is inconsistent among its member ports, this value is error(1).
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER error(1), backPressure(2), dot3xFlowControl(3), none(4)  

ntWlanTransferStart 1.3.6.1.4.1.45.1.11.1.4.1
Set to go(1) to start a transfer.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER go(1), nogo(2)  

ntWlanTransferType 1.3.6.1.4.1.45.1.11.1.4.2
Type of file to transfer.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER ftpDownload(1), tftpDownload(2), ftpUpload(3), tftpUpload(4)  

ntWlanFileType 1.3.6.1.4.1.45.1.11.1.4.3
Type of file to transfer.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER firmware(1), config(2), nortelConfig(3)  

ntWlanSrcFile 1.3.6.1.4.1.45.1.11.1.4.4
The source file name for TFTP transfer when a transfer is next requested via this MIB. This value is set to the zero length string when no file name has been specified.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..127)  

ntWlanDestFile 1.3.6.1.4.1.45.1.11.1.4.5
The destination file name for TFTP transfer when a transfer is next requested via this MIB. This value is set to the zero length string when no file name has been specified.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..127)  

ntWlanFileServer 1.3.6.1.4.1.45.1.11.1.4.6
The IP address of the TFTP server for transfer when a download is next requested via this MIB. This value is set to `0.0.0.0' when no IP address has been specified.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

ntWlanUserName 1.3.6.1.4.1.45.1.11.1.4.7
The username specified for an FTP Transfer.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..127)  

ntWlanPassword 1.3.6.1.4.1.45.1.11.1.4.8
The password specified for an FTP Transfer.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..127)  

ntWlanFileTransferStatus 1.3.6.1.4.1.45.1.11.1.4.9
The status of the current FTP Transfer process.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER none(1), inProgress(2), success(3), fail(4), invalidSource(5), invalidDestination(6), outOfMemory(7), outOfSpace(8), fileNotFound(9)  

ntWlanRestartOpCodeFile 1.3.6.1.4.1.45.1.11.1.5.1
Name of op-code file for start-up.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..127)  

ntWlanRestartControl 1.3.6.1.4.1.45.1.11.1.5.2
Setting this object to warmBoot(2) causes the device to restart the application software with current configuration parameters saved in non-volatile memory. Setting this object to coldBoot(3) causes the device to reinitialize configuration parameters in non-volatile memory to default values and restart the application software. When the device is running normally, this variable has a value of running(1).
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER running(1), warmBoot(2), coldBoot(3)  

ntWlanNetConfigIPAddress 1.3.6.1.4.1.45.1.11.1.6.1
The IP address of this Net interface. The default value for this object is 0.0.0.0. If either the netConfigIPAddress or netConfigSubnetMask are 0.0.0.0, then when the device boots, it may use DHCP to try to figure out what these values should be. If DHCP fails, before the device can talk on the network, this value must be configured (e.g., through a terminal attached to the device).
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

ntWlanNetConfigSubnetMask 1.3.6.1.4.1.45.1.11.1.6.2
The subnet mask of this Net interface. The default value for this object is 0.0.0.0. If either the netConfigIPAddress or netConfigSubnetMask are 0.0.0.0, then when the device boots, it may use DHCP to try to figure out what these values should be. If DHCP fails, before the device can talk on the network, this value must be configured (e.g., through a terminal attached to the device).
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

ntWlanNetDefaultGateway 1.3.6.1.4.1.45.1.11.1.6.3
The IP Address of the default gateway. If this value is undefined or unknown, it shall have the value 0.0.0.0.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

ntWlanIpHttpState 1.3.6.1.4.1.45.1.11.1.6.4
Whether HTTP is enabled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

ntWlanIpHttpPort 1.3.6.1.4.1.45.1.11.1.6.5
The port number for HTTP.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..65535  

ntWlanDot11Phy 1.3.6.1.4.1.45.1.11.1.7.4
OBJECT IDENTIFIER    

ntWlanDot11PhyOperationTable 1.3.6.1.4.1.45.1.11.1.7.4.1
Table of descriptive and status information about configuration of each radio of the AP.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NtWlanDot11PhyOperationEntry

ntWlanDot11PhyOperationEntry 1.3.6.1.4.1.45.1.11.1.7.4.1.1
An entry in the table, containing information about configuration in one radio of the AP.
Status: current Access: not-accessible
OBJECT-TYPE    
  NtWlanDot11PhyOperationEntry  

ntWlanDot11Index 1.3.6.1.4.1.45.1.11.1.7.4.1.1.1
Radio index of the AP.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..2147483647  

ntWlanDot11TurboModeEnabled 1.3.6.1.4.1.45.1.11.1.7.4.1.1.3
This attribute, when true, shall indicate that the nortel's propietory turbo mode option is enabled. The default value of this attribute shall be false.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER none(99), on(1), off(2)  

ntWlanDot11PreambleLength 1.3.6.1.4.1.45.1.11.1.7.4.1.1.4
This attribute determines whether or not a short or a long preamble is used to delineate 802.11 frames.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER twelveSymbols(99), short(1), long(2)  

ntWlanDot11dWorldModeEnabled 1.3.6.1.4.1.45.1.11.1.7.4.1.1.5
This attribute determines whether 802.11d world mode is enabled for this radio.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

ntWlanDot11ClosedSystem 1.3.6.1.4.1.45.1.11.1.7.4.1.1.6
This attribute determines whether the radio operates as a closed system. When configured as a closed system, the SSID is not included when broadcasting periodic beacon frames.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

ntWlanDot11AuthenticationEntry 1.3.6.1.4.1.45.1.11.1.7.5
OBJECT IDENTIFIER    

ntWlanDot118021xSupport 1.3.6.1.4.1.45.1.11.1.7.5.1
This attribute, when true(1), indicates that the Enterprise Access Point supports the 802.1x authentication algorithm.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

ntWlanDot118021xRequired 1.3.6.1.4.1.45.1.11.1.7.5.2
This attribute, when true(1), indicates that the Enterprise Access Point requires successful 802.1x authentication for any clients accessing the network.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

ntWlanDot118021xBcastKeyRefresh 1.3.6.1.4.1.45.1.11.1.7.5.3
The broadcast key refresh rate.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..1440  

ntWlanDot118021xSessKeyRefresh 1.3.6.1.4.1.45.1.11.1.7.5.4
The session key refresh rate.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..1440  

ntWlanDot118021xReAuthRefresh 1.3.6.1.4.1.45.1.11.1.7.5.5
The re-authentication refresh rate.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..65535  

ntWlanDot11AuthenticationServerTable 1.3.6.1.4.1.45.1.11.1.7.6
Table of descriptive and status information about configuration of each authentication server.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NtWlanDot11AuthenticationServerEntry

ntWlanDot11AuthenticationServerEntry 1.3.6.1.4.1.45.1.11.1.7.6.1
An entry in the table, containing information about configuration in one radio of the AP.
Status: current Access: not-accessible
OBJECT-TYPE    
  NtWlanDot11AuthenticationServerEntry  

ntWlanDot11ServerIndex 1.3.6.1.4.1.45.1.11.1.7.6.1.1
Radio index of the AP.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..2147483647  

ntWlanDot11AuthenticationServer 1.3.6.1.4.1.45.1.11.1.7.6.1.2
This values indicates the IP address of the authentication server.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

ntWlanDot11AuthenticationPort 1.3.6.1.4.1.45.1.11.1.7.6.1.3
This values indicates the UDP Port used by the primary authentication server.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1024..65535  

ntWlanDot11AuthenticationKey 1.3.6.1.4.1.45.1.11.1.7.6.1.4
This values indicates the shared key used by the authentication server.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..20)  

ntWlanDot11AuthenticationRetransmit 1.3.6.1.4.1.45.1.11.1.7.6.1.5
This values indicates the retransmit timer length used by the authentication server.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..30  

ntWlanDot11AuthenticationTimeout 1.3.6.1.4.1.45.1.11.1.7.6.1.6
This values indicates the Timeout value(sec) used by the authentication server.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..60  

ntWlanDot11SecondaryAuthServer 1.3.6.1.4.1.45.1.11.1.7.6.1.7
This values indicates the IP address of the secondary authentication server.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

ntWlanDot11SecondaryAuthPort 1.3.6.1.4.1.45.1.11.1.7.6.1.8
This values indicates the UDP Port used by the primary secondary authentication server.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1024..65535  

ntWlanDot11SecondaryAuthKey 1.3.6.1.4.1.45.1.11.1.7.6.1.9
This values indicates the shared key used by the secondary authentication server.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..20)  

ntWlanDot11SecondaryAuthRetransmit 1.3.6.1.4.1.45.1.11.1.7.6.1.10
This values indicates the retransmit timer length used by the secondary authentication server.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..30  

ntWlanDot11SecondaryAuthTimeout 1.3.6.1.4.1.45.1.11.1.7.6.1.11
This values indicates the Timeout value(sec) used by the secondary authentication server.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..60  

ntWlanDot11FilterTable 1.3.6.1.4.1.45.1.11.1.7.7
Table of status information about each configured MAC Address Filtering Entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NtWlanDot11FilterEntry

ntWlanDot11FilterEntry 1.3.6.1.4.1.45.1.11.1.7.7.1
An entry in the table, containing information about configuration in one radio of the AP.
Status: current Access: not-accessible
OBJECT-TYPE    
  NtWlanDot11FilterEntry  

ntWlanDot11FilterIndex 1.3.6.1.4.1.45.1.11.1.7.7.1.1
Filter index.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..2147483647  

ntWlanDot11FilterAddress 1.3.6.1.4.1.45.1.11.1.7.7.1.2
This values indicates the MAC address of the filter entry.
Status: current Access: read-write
OBJECT-TYPE    
  PhysAddress  

ntWlanDot11FilterStatus 1.3.6.1.4.1.45.1.11.1.7.7.1.3
This values indicates the Status of the filter entry. Ifallowed, the client is allowed access to the network. If disallowed, the no frames will be forwarded to the network from the client.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER allowed(30), denied(31)  

ntWlanDot11TrapTable 1.3.6.1.4.1.45.1.11.1.7.9
Table of status information for Association and Disassociation Trap
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NtWlanDot11TrapEntry

ntWlanDot11TrapEntry 1.3.6.1.4.1.45.1.11.1.7.9.1
An entry in the table, containing information for the association and disassociation trap.
Status: current Access: not-accessible
OBJECT-TYPE    
  NtWlanDot11TrapEntry  

ntWlanDot11InterfaceIndex 1.3.6.1.4.1.45.1.11.1.7.9.1.1
Interface index.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..2147483647  

ntWlanDot11AssociationStationAddress 1.3.6.1.4.1.45.1.11.1.7.9.1.2
This values indicates the MAC address of the Mobile Unit associating with this Access Point.
Status: current Access: read-only
OBJECT-TYPE    
  PhysAddress  

ntWlanDot11DisassociationStationAddress 1.3.6.1.4.1.45.1.11.1.7.9.1.3
This values indicates the MAC address of the Mobile Unit no longer associated with this Access Point.
Status: current Access: read-only
OBJECT-TYPE    
  PhysAddress  

ntWlanDot11AssociationMU 1.3.6.1.4.1.45.1.11.1.7.9.1.4
This values indicates the number of Mobile Units associated on the Interface
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

ntWlanApTraps0 1.3.6.1.4.1.45.1.11.1.8.0
OBJECT IDENTIFIER    

ntWlanApDot1xAuthenticationFail 1.3.6.1.4.1.45.1.11.1.8.0.101
Indicates that a Mobile Unit failed 802.1x authentication. - ifPhysAddress is the MAC address of the Access Point sending this trap message. - ntWlanDot11AssociationStationAddress is the MAC address of the Mobile Unit.
Status: current Access: read-only
NOTIFICATION-TYPE    

ntWlanApMuAssocTrap 1.3.6.1.4.1.45.1.11.1.8.0.111
Indicates that there is a Mobile Unit associating with this Access Point. - ifPhysAddress is the MAC address of the Access Point sending this trap message. - ntWlanDot11AssociationStationAddress is the MAC address of the Mobile Unit. Note: If two or more Mobile Units associate with the Access Point at the same time, ntWlanDot11AssociationStationAddress belongs to the last Mobile Unit. - ntWlanDot11AssociationMU is the number of Mobile Units currently associating with this Access Point.
Status: current Access: read-only
NOTIFICATION-TYPE    

ntWlanApMuDisAssocTrap 1.3.6.1.4.1.45.1.11.1.8.0.112
Indicates that there is one Mobile Unit no longer associating with this Access Point anymore. - ifPhysAddress is the MAC address of the Access Point sending this trap message. - ntWlanDot11DisassociationStationAddress is the MAC address of the Mobile Unit. Note: If two or more Mobile Units un-associate with the Access Point at the same time, ntWlanDot11DisassociationStationAddress belongs to the last Mobile Unit. - ntWlanDot11AssociationMU is the number of Mobile Units currently associating with this Access Point.
Status: current Access: read-only
NOTIFICATION-TYPE    

ntWlanApMuWEPAuthFail 1.3.6.1.4.1.45.1.11.1.8.0.113
Indicates that WEP authentication of a Mobile Unit failed. - ifIndex identifies the radio to which the MU attempted to connect. - ntWlanDot11AssociationStationAddress is the MAC address of the Mobile Unit that attempted to connect.
Status: current Access: read-only
NOTIFICATION-TYPE    

ntWlanApMuWPAAuthFail 1.3.6.1.4.1.45.1.11.1.8.0.114
Indicates that WPA authentication of a Mobile Unit failed. - ifIndex identifies the radio to which the MU attempted to connect. - ntWlanDot11AssociationStationAddress is the MAC address of the Mobile Unit that attempted to connect.
Status: current Access: read-only
NOTIFICATION-TYPE    

ntWlanApMuAssocTrapEnabled 1.3.6.1.4.1.45.1.11.1.8.1
This object controls whether ntWlanApMuAssocTrap notifications will be generated when an MU associates with the AP. If this object is true(1), then the notification will be generated. If it is false, the notification will not be generated.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

ntWlanApMuDisAssocTrapEnabled 1.3.6.1.4.1.45.1.11.1.8.2
This object controls whether ntWlanApMuDisAssocTrap notifications will be generated when an MU disassociates from the AP. If this object is true(1), then the notification will be generated. If it is false, the notification will not be generated.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

ntWlanApLIDCheckEtherLinkEnabled 1.3.6.1.4.1.45.1.11.1.9.1
Indicates whether checks for ethernet link integrity are enabled.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

ntWlanApLIDCheckIPLinkEnabled 1.3.6.1.4.1.45.1.11.1.9.2
Indicates whether checks for IP link integrity are enabled.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

ntWlanApLIDCheckIpLinkAddress 1.3.6.1.4.1.45.1.11.1.9.3
The IP address to ping to check IP link integrity.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

ntWlanApRateSupportTable 1.3.6.1.4.1.45.1.11.1.10.1
Table to configure which hardware-supported rates are actively supported, and which are basic rates required for an MU to connect to an AP. Entries must exist in this table for every hardware-supported rate for each appropriate ifIndex value.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NtWlanApRateSupportEntry

ntWlanApRateSupportEntry 1.3.6.1.4.1.45.1.11.1.10.1.1
An entry in the ntWlanApRateSupportTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  NtWlanApRateSupportEntry  

ntWlanApRateSupportIfIndex 1.3.6.1.4.1.45.1.11.1.10.1.1.1
The ifIndex value of the radio.
Status: current Access: not-accessible
OBJECT-TYPE    
  InterfaceIndex  

ntWlanApRateSupportSpeed 1.3.6.1.4.1.45.1.11.1.10.1.1.2
A supported data rate.
Status: current Access: not-accessible
OBJECT-TYPE    
  NtWlanApDataRate  

ntWlanApRateSupportLevel 1.3.6.1.4.1.45.1.11.1.10.1.1.3
This object indicates whether a specific rate is currently supported, and if so, whether it is a basic rate. off - indicates that this rate is not currently supported. supported - indicates that this rate is currently supported, but is not required to be supported by an MU in order to connect to this radio. supportedBasic - indicates that this rate is currently supported as a basic rate, and an MU must also support this rate in order to connect to this radio.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER off(0), supported(1), supportedBasic(2)  

ntWlanApSecurityTable 1.3.6.1.4.1.45.1.11.1.11.1
Table to configure WEP and WPA security parameters. Entries are per-radio.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NtWlanApSecurityEntry

ntWlanApSecurityEntry 1.3.6.1.4.1.45.1.11.1.11.1.1
An entry in the ntWlanApSecurityTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  NtWlanApSecurityEntry  

ntWlanApSecurityIfIndex 1.3.6.1.4.1.45.1.11.1.11.1.1.1
The ifIndex value of the radio.
Status: current Access: not-accessible
OBJECT-TYPE    
  InterfaceIndex  

ntWlanApSecurityEnabled 1.3.6.1.4.1.45.1.11.1.11.1.1.2
Indicates whether security is enabled for a radio.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

ntWlanApSecurityWEPAuthType 1.3.6.1.4.1.45.1.11.1.11.1.1.3
The WEP authentication type.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER openSystem(0), sharedKey(1)  

ntWlanApSecurityWEPKeyLength 1.3.6.1.4.1.45.1.11.1.11.1.1.4
Indicates the WEP key length being used.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER wepKey64(0), wepKey128(1), wepKey152(2)  

ntWlanApSecurityWEPActiveKey 1.3.6.1.4.1.45.1.11.1.11.1.1.5
Indicates which WEP key is currently in use.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..4  

ntWlanApSecurityWEPKey1 1.3.6.1.4.1.45.1.11.1.11.1.1.6
The first WEP key. Retrieval of this object will always return an empty string.
Status: current Access: read-write
OBJECT-TYPE    
  NtWlanApWEPKey  

ntWlanApSecurityWEPKey2 1.3.6.1.4.1.45.1.11.1.11.1.1.7
The second WEP key. Retrieval of this object will always return an empty string.
Status: current Access: read-write
OBJECT-TYPE    
  NtWlanApWEPKey  

ntWlanApSecurityWEPKey3 1.3.6.1.4.1.45.1.11.1.11.1.1.8
The third WEP key. Retrieval of this object will always return an empty string.
Status: current Access: read-write
OBJECT-TYPE    
  NtWlanApWEPKey  

ntWlanApSecurityWEPKey4 1.3.6.1.4.1.45.1.11.1.11.1.1.9
The fourth WEP key. Retrieval of this object will always return an empty string.
Status: current Access: read-write
OBJECT-TYPE    
  NtWlanApWEPKey  

ntWlanApSecurityWPASupport 1.3.6.1.4.1.45.1.11.1.11.1.1.10
Indicates whether WPA security is supported.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER supported(1), required(2), wepOnly(3)  

ntWlanApSecurityWPAMode 1.3.6.1.4.1.45.1.11.1.11.1.1.11
The WPA mode.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER dynamic(0), preSharedKey(1)  

ntWlanApSecurityWPAPreSharedKey 1.3.6.1.4.1.45.1.11.1.11.1.1.12
The WPA pre-shared key.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(63)  

ntWlanApSecurityWPAMcastCypherMode 1.3.6.1.4.1.45.1.11.1.11.1.1.13
The multicast cypher mode.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER wep(0), tkip(1), aes(2)  

ntWlanApQoSMode 1.3.6.1.4.1.45.1.11.1.12.1
This object indicates the QoS mode being used. off - indicates QoS features are disabled. etherSrc - indicates that the ethernet source MAC address of received packets is mapped to an egress queue. etherDst - indicates that the ethernet destination MAC address of received packets is mapped to an egress queue. etherType - indicates that the ethernet type of of received packets is mapped to an egress queue. directPriorityMap - indicates that the priority value of received packets is used to map directly to an egress queue.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER off(0), etherSrc(1), etherDst(2), ethertype(3), directPriorityMap(4)  

ntWlanApQoSEtherTypeToQueueTable 1.3.6.1.4.1.45.1.11.1.12.2
Table to configure mappings from ethernet type to queue number.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NtWlanApQoSEtherTypeToQueueEntry

ntWlanApQoSEtherTypeToQueueEntry 1.3.6.1.4.1.45.1.11.1.12.2.1
An entry in the ntWlanApQoSTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  NtWlanApQoSEtherTypeToQueueEntry  

ntWlanApQoSEtherTypeToQueueIndex 1.3.6.1.4.1.45.1.11.1.12.2.1.1
An ethernet type, to be mapped to a queue.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..65535  

ntWlanApQoSEtherTypeToQueueNumber 1.3.6.1.4.1.45.1.11.1.12.2.1.2
The queue number to which the ether type is mapped.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..7  

ntWlanApQoSEtherTypeToQueueRowStatus 1.3.6.1.4.1.45.1.11.1.12.2.1.3
This object is used to create and destroy entries in this table.
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

ntWlanApQoSMACToQueueTable 1.3.6.1.4.1.45.1.11.1.12.3
Table to configure mappings from ethernet MAC address to queue number.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NtWlanApQoSMACToQueueEntry

ntWlanApQoSMACToQueueEntry 1.3.6.1.4.1.45.1.11.1.12.3.1
An entry in the ntWlanApQoSTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  NtWlanApQoSMACToQueueEntry  

ntWlanApQoSMACToQueueAddress 1.3.6.1.4.1.45.1.11.1.12.3.1.1
An ethernet MAC address, to be mapped to a queue.
Status: current Access: not-accessible
OBJECT-TYPE    
  MacAddress  

ntWlanApQoSMACToQueueNumber 1.3.6.1.4.1.45.1.11.1.12.3.1.2
The queue number to which the MAC address is mapped.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..7  

ntWlanApQoSMACToQueueRowStatus 1.3.6.1.4.1.45.1.11.1.12.3.1.3
This object is used to create and destroy entries in this table.
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

ntWlanApVlanEnabled 1.3.6.1.4.1.45.1.11.1.13.1
This object indicates whether Vlan support is enabled.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

ntWlanApVlanTable 1.3.6.1.4.1.45.1.11.1.13.2
Table to configure the default VID per-radio.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NtWlanApVlanEntry

ntWlanApVlanEntry 1.3.6.1.4.1.45.1.11.1.13.2.1
An entry in the ntWlanApVlanTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  NtWlanApVlanEntry  

ntWlanApVlanIfIndex 1.3.6.1.4.1.45.1.11.1.13.2.1.1
The ifIndex value of the radio.
Status: current Access: not-accessible
OBJECT-TYPE    
  InterfaceIndex  

ntWlanApVlanDefaultVid 1.3.6.1.4.1.45.1.11.1.13.2.1.2
The default VID of the radio.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..4094  

ntWlanApVlanMUMACToVidTable 1.3.6.1.4.1.45.1.11.1.13.3
Table containing mappings from Mobile Unit MAC addresses to VLAN ID values.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NtWlanApVlanMUMACToVidEntry

ntWlanApVlanMUMACToVidEntry 1.3.6.1.4.1.45.1.11.1.13.3.1
An entry in the ntWlanApVlanMUMACToVidTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  NtWlanApVlanMUMACToVidEntry  

ntWlanApVlanMUMACToVidAddress 1.3.6.1.4.1.45.1.11.1.13.3.1.1
The ethernet MAC address of a Mobile Unit.
Status: current Access: not-accessible
OBJECT-TYPE    
  MacAddress  

ntWlanApVlanMUMACToVidNumber 1.3.6.1.4.1.45.1.11.1.13.3.1.2
The VID to which this Mobile Unit's MAC is mapped.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..4094  

ntWlanApMUStatsTable 1.3.6.1.4.1.45.1.11.1.14.1
Table of per-Mobile Unit statistics.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NtWlanApMUStatsEntry

ntWlanApMUStatsEntry 1.3.6.1.4.1.45.1.11.1.14.1.1
An entry in the ntWlanApMUStatsTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  NtWlanApMUStatsEntry  

ntWlanApMUStatsMUAddress 1.3.6.1.4.1.45.1.11.1.14.1.1.1
The ethernet MAC address of the Mobile Unit.
Status: current Access: not-accessible
OBJECT-TYPE    
  MacAddress  

ntWlanApMUStatsPacketsIn 1.3.6.1.4.1.45.1.11.1.14.1.1.2
A count of the packets received from this MU.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ntWlanApMUStatsPacketsOut 1.3.6.1.4.1.45.1.11.1.14.1.1.3
A count of the packets sent to this MU.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ntWlanApMUStatsOctetsIn 1.3.6.1.4.1.45.1.11.1.14.1.1.4
A count of the octets received from this MU.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ntWlanApMUStatsOctetsOut 1.3.6.1.4.1.45.1.11.1.14.1.1.5
A count of the octets sent to this MU.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor