HUAWEI-VO-GENERAL-MIB

File: HUAWEI-VO-GENERAL-MIB.mib (30125 bytes)

Imported modules

SNMPv2-SMI HUAWEI-3COM-OID-MIB

Imported symbols

OBJECT-TYPE MODULE-IDENTITY voice

Defined Types

EntryStatus  
INTEGER valid(1), createRequest(2), underCreation(3), invalid(4)    

HWVoDialExpansionEntry  
SEQUENCE    
  hwVoDialExpansionType INTEGER
  hwVoDialExpansionSource OCTET STRING
  hwVoDialExpansionTarget OCTET STRING
  hwVoDialExpansionRowStatus EntryStatus

HWVoLtoPEntry  
SEQUENCE    
  hwVoLtoPChannel INTEGER
  hwVoLtoPSlot INTEGER
  hwVoLtoPPort INTEGER
  hwVoLtoPTimeSlot INTEGER
  hwVoLtoPStatus INTEGER
  hwVoLtoPBoardType INTEGER
  hwVoLtoPPortNumber INTEGER
  hwVoLtoPGroupNumber INTEGER

HWVoNumSubstEntry  
SEQUENCE    
  hwVoNumSubstIndex INTEGER
  hwVoNumSubstFirstRule INTEGER
  hwVoNumSubstDotMatchRule INTEGER
  hwVoNumSubstRowStatus EntryStatus

HWVoNumSubstRuleEntry  
SEQUENCE    
  hwVoNumSubstRuleIndex INTEGER
  hwVoNumSubstRuleInputFormat OCTET STRING
  hwVoNumSubstRuleOutputFormat OCTET STRING
  hwVoNumSubstRuleRowStatus EntryStatus

HWVoMaxCallEntry  
SEQUENCE    
  hwVoMaxCallTableIndex INTEGER
  hwVoMaxCallValue INTEGER
  hwVoMaxCallTableRowStatus EntryStatus

HWVoIncomingCallingNumSubstEntry  
SEQUENCE    
  hwVoIncomingCallingNumSubstIndex INTEGER
  hwVoIncomingCallingNumSubstRowStatus EntryStatus

HWVoIncomingCalledNumSubstEntry  
SEQUENCE    
  hwVoIncomingCalledNumSubstIndex INTEGER
  hwVoIncomingCalledNumSubstRowStatus EntryStatus

HWVoOutgoingCallingNumSubstEntry  
SEQUENCE    
  hwVoOutgoingCallingNumSubstIndex INTEGER
  hwVoOutgoingCallingNumSubstRowStatus EntryStatus

HWVoOutgoingCalledNumSubstEntry  
SEQUENCE    
  hwVoOutgoingCalledNumSubstIndex INTEGER
  hwVoOutgoingCalledNumSubstRowStatus EntryStatus

Defined Values

hwVoiceGeneralMIB 1.3.6.1.4.1.2011.5.25.1.1
MODULE-IDENTITY    

hwVoiceGeneralObjects 1.3.6.1.4.1.2011.5.25.1.1.1
OBJECT IDENTIFIER    

hwVoiceGeneralGroup 1.3.6.1.4.1.2011.5.25.1.1.1.1
OBJECT IDENTIFIER    

hwVoGeneralJitterLen 1.3.6.1.4.1.2011.5.25.1.1.1.1.1
This object specifies the length of the Jitter buffer. The default value is 3.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..10  

hwVoGeneralMatchPolicy 1.3.6.1.4.1.2011.5.25.1.1.1.1.2
This object specifies match number policy of this gateway. The default value is short.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER long(1), short(2)  

hwVoGeneralSendPerformance 1.3.6.1.4.1.2011.5.25.1.1.1.1.3
This object specifies the performance of sending voice data. The default value is normal.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER normal(1), fast(2)  

hwVoGeneralReceivePerformance 1.3.6.1.4.1.2011.5.25.1.1.1.1.4
This object specifies the performance of receiving voice data. The default value is normal
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER normal(1), fast(2)  

hwVoGeneralDataStatistics 1.3.6.1.4.1.2011.5.25.1.1.1.1.5
Enable/disable data statistics
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

hwVoGeneralPacketPrecedence 1.3.6.1.4.1.2011.5.25.1.1.1.1.6
Set global Voip packet precedence
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..7  

hwVoGeneralDialTerminator 1.3.6.1.4.1.2011.5.25.1.1.1.1.7
Set global Dial Terminator
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..1)  

hwVoGeneralCallStart 1.3.6.1.4.1.2011.5.25.1.1.1.1.8
Set the start mode of called over IP
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER fast(1), normal(2)  

hwVoGeneralCalledTunnel 1.3.6.1.4.1.2011.5.25.1.1.1.1.9
Enable/disable Called tunnel function
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

hwVoGeneralSpecialServiceEnable 1.3.6.1.4.1.2011.5.25.1.1.1.1.10
This object sepcifies whether special service number function is enable or disable.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

hwVoGeneralCallTransferSpecialServiceNumber 1.3.6.1.4.1.2011.5.25.1.1.1.1.11
This object specifies the call-transfer special service number in talking.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..12)  

hwVoGeneralPeerSearchStop 1.3.6.1.4.1.2011.5.25.1.1.1.1.12
This object specifies the maximum in searching entities.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..200  

hwVoGeneralPeerSelectOrderRule 1.3.6.1.4.1.2011.5.25.1.1.1.1.13
This object specifies the rule order applied in voice entity selection. 0 --- explicit match, priority, random 1 --- explicit match, priority, longest no use 2 --- explicit match, longest no use, priority 3 --- explicit match, longest no use, random 4 --- priority, explicit match, random 5 --- priority, explicit match, longest no usep 6 --- riority, longest no use, explicit match 7 --- priority, longest no use, random 8 --- longest no use, explicit match, priority 9 --- longest no use, explicit match, random 10 --- longest no use, priority, explicit match 11 --- longest no use, priority, random 12 --- explicit match, random 13 --- priority, random 14 --- longest no use, random 15 --- explicit match 16 --- priority 17 --- random 18 --- longest no use
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..18  

hwVoGeneralPeerSelectTypePriority 1.3.6.1.4.1.2011.5.25.1.1.1.1.14
This object specifies the priority-ranked type of voice entity. 1ST 2DN 3RD 0 --- NONE TYPE 1 --- VOIP POTS VOFR 2 --- VOIP VOFR POTS 3 --- POTS VOIP VOFR 4 --- POTS VOFR VOIP 5 --- VOFR POTS VOIP 6 --- VOFR POTS POTS
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..6  

hwVoDialExpansionTable 1.3.6.1.4.1.2011.5.25.1.1.1.3
The table contains the information of the Dial Expansion Record .
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HWVoDialExpansionEntry

hwVoDialExpansionEntry 1.3.6.1.4.1.2011.5.25.1.1.1.3.1
The information regarding a Dial Expansion Record.
Status: current Access: not-accessible
OBJECT-TYPE    
  HWVoDialExpansionEntry  

hwVoDialExpansionType 1.3.6.1.4.1.2011.5.25.1.1.1.3.1.1
The call direction of the Dial Expansion.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER callin(0), callout(1)  

hwVoDialExpansionSource 1.3.6.1.4.1.2011.5.25.1.1.1.3.1.2
This source telephone of the Dial Expansion.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1..31)  

hwVoDialExpansionTarget 1.3.6.1.4.1.2011.5.25.1.1.1.3.1.3
This target telephone of the Dial Expansion.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..31)  

hwVoDialExpansionRowStatus 1.3.6.1.4.1.2011.5.25.1.1.1.3.1.4
This object is used to create a new row or modify or delete an existing row in this table.
Status: current Access: read-write
OBJECT-TYPE    
  EntryStatus  

hwVoLtoPTable 1.3.6.1.4.1.2011.5.25.1.1.1.2
The table contains the relation information of Voice logic channel and voice physical channel.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HWVoLtoPEntry

hwVoLtoPEntry 1.3.6.1.4.1.2011.5.25.1.1.1.2.1
The information regarding a single logic voice channel .
Status: current Access: not-accessible
OBJECT-TYPE    
  HWVoLtoPEntry  

hwVoLtoPChannel 1.3.6.1.4.1.2011.5.25.1.1.1.2.1.1
The number of this logic voice channel .
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

hwVoLtoPSlot 1.3.6.1.4.1.2011.5.25.1.1.1.2.1.2
The physical slot number which this logic voice channel based on.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

hwVoLtoPPort 1.3.6.1.4.1.2011.5.25.1.1.1.2.1.3
The physical port number which this logic voice channel based on.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

hwVoLtoPTimeSlot 1.3.6.1.4.1.2011.5.25.1.1.1.2.1.4
The timeslots map this logic channel is using . -1 represent this channel cann't be used by voice.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

hwVoLtoPStatus 1.3.6.1.4.1.2011.5.25.1.1.1.2.1.5
The current status of the physical voice channel.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER up(1), down(2)  

hwVoLtoPBoardType 1.3.6.1.4.1.2011.5.25.1.1.1.2.1.6
The board type of the physical voice channel.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER fxs2(1), fxo2(2), em2(3), fxs4(4), fxo4(5), em4(6), e1vi(7), t1vi(8), sic-fxs1(9), sic-fxo1(10), sic-fxs2(11), sic-fxo2(12)  

hwVoLtoPPortNumber 1.3.6.1.4.1.2011.5.25.1.1.1.2.1.7
The global port number of the logic voice channel. -1 represent this channel cann't be used by voice.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

hwVoLtoPGroupNumber 1.3.6.1.4.1.2011.5.25.1.1.1.2.1.8
The global group number of the logic voice channel. . -1 represent this channel cann't be used by voice .
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER -1..30 | 255  

hwVoiceNumberSubstGroup 1.3.6.1.4.1.2011.5.25.1.1.1.4
OBJECT IDENTIFIER    

hwVoNumSubstTable 1.3.6.1.4.1.2011.5.25.1.1.1.4.1
The table is the number-substitute rule table. It contains the table index, dot match rule and the first rule tag that the rule is used firstly.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HWVoNumSubstEntry

hwVoNumSubstEntry 1.3.6.1.4.1.2011.5.25.1.1.1.4.1.1
A number-substitute rule list. One entry per number-substite rule list.
Status: current Access: not-accessible
OBJECT-TYPE    
  HWVoNumSubstEntry  

hwVoNumSubstIndex 1.3.6.1.4.1.2011.5.25.1.1.1.4.1.1.1
The index uniquely identifies a number-substitute rule list. It is valid if its value is between 1 and 2147483647.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..2147483647  

hwVoNumSubstFirstRule 1.3.6.1.4.1.2011.5.25.1.1.1.4.1.1.2
This object specifies the first rule to be used firstly. It is valid if its value is between 0 and 127.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..127 | 65535  

hwVoNumSubstDotMatchRule 1.3.6.1.4.1.2011.5.25.1.1.1.4.1.1.3
This object specifies the dot wildcard match rule. end-only - only end of E.164 number (input format) left-right - match form left to right (input format) right-left - match form right to left (input format)
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER end-only(1), left-right(2), right-left(3)  

hwVoNumSubstRowStatus 1.3.6.1.4.1.2011.5.25.1.1.1.4.1.1.4
This object is used to create a new row or modify or delete an existing row in this table.
Status: current Access: read-write
OBJECT-TYPE    
  EntryStatus  

hwVoNumSubstRuleTable 1.3.6.1.4.1.2011.5.25.1.1.1.4.2
The table contains the number-substitute rule information that is used to create an rule row with an appropriate rule index.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HWVoNumSubstRuleEntry

hwVoNumSubstRuleEntry 1.3.6.1.4.1.2011.5.25.1.1.1.4.2.1
A single number-substitute rule. One entry per number-substitute rule.
Status: current Access: not-accessible
OBJECT-TYPE    
  HWVoNumSubstRuleEntry  

hwVoNumSubstRuleIndex 1.3.6.1.4.1.2011.5.25.1.1.1.4.2.1.1
The index uniquely identifies a number-substitute rule. It is valid if its value is between 0 and 127.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..127  

hwVoNumSubstRuleInputFormat 1.3.6.1.4.1.2011.5.25.1.1.1.4.2.1.2
This object specifies the input match format that must be of the form ^(\^)!(\+)!([0-9ABCD.*%!#]+)($)!$.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..31)  

hwVoNumSubstRuleOutputFormat 1.3.6.1.4.1.2011.5.25.1.1.1.4.2.1.3
This object specifies the output format that must be of the form ^[0-9#.]+$.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..31)  

hwVoNumSubstRuleRowStatus 1.3.6.1.4.1.2011.5.25.1.1.1.4.2.1.4
This object is used to create a new row or modify or delete an existing row in this table.
Status: current Access: read-write
OBJECT-TYPE    
  EntryStatus  

hwVoMaxCallTable 1.3.6.1.4.1.2011.5.25.1.1.1.5
The table stores The table stores the maximum number of allowed connections for a set of voice entities.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HWVoMaxCallEntry

hwVoMaxCallEntry 1.3.6.1.4.1.2011.5.25.1.1.1.5.1
A single value of maximum call connections. One entry per maximum call connections.
Status: current Access: not-accessible
OBJECT-TYPE    
  HWVoMaxCallEntry  

hwVoMaxCallTableIndex 1.3.6.1.4.1.2011.5.25.1.1.1.5.1.1
The index uniquely identifies a single maximum call value. It is valid if its value is between 1 and 2147483647.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..2147483647  

hwVoMaxCallValue 1.3.6.1.4.1.2011.5.25.1.1.1.5.1.2
This object specifies a single maximum call value. It is valid if its value is between 0 and 120.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..120  

hwVoMaxCallTableRowStatus 1.3.6.1.4.1.2011.5.25.1.1.1.5.1.3
This object is used to create a new row or modify or delete an existing row in this table.
Status: current Access: read-write
OBJECT-TYPE    
  EntryStatus  

hwVoIncomingCallingNumSubstTable 1.3.6.1.4.1.2011.5.25.1.1.1.6
The table stores the number-substitute rule list tag that these number-substitute rule list will be used for incoming-call caller number.The table can hold max 32 rows.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HWVoIncomingCallingNumSubstEntry

hwVoIncomingCallingNumSubstEntry 1.3.6.1.4.1.2011.5.25.1.1.1.6.1
A number-substitute rule list tag. One entry per number-substite rule list tag.
Status: current Access: not-accessible
OBJECT-TYPE    
  HWVoIncomingCallingNumSubstEntry  

hwVoIncomingCallingNumSubstIndex 1.3.6.1.4.1.2011.5.25.1.1.1.6.1.1
This object specifies a number-substitute rule that apply caller number for incoming call. It is valid if its value is between 1 and 2147483647.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..2147483647  

hwVoIncomingCallingNumSubstRowStatus 1.3.6.1.4.1.2011.5.25.1.1.1.6.1.2
This object is used to create a new row or modify or delete an existing row in this table.
Status: current Access: read-write
OBJECT-TYPE    
  EntryStatus  

hwVoIncomingCalledNumSubstTable 1.3.6.1.4.1.2011.5.25.1.1.1.7
The table stores the number-substitute rule list tag that these number-substitute rule list will be used for incoming-call caller number.The table can hold max 32 rows.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HWVoIncomingCalledNumSubstEntry

hwVoIncomingCalledNumSubstEntry 1.3.6.1.4.1.2011.5.25.1.1.1.7.1
A number-substitute rule list tag. One entry per number-substite rule list tag.
Status: current Access: not-accessible
OBJECT-TYPE    
  HWVoIncomingCalledNumSubstEntry  

hwVoIncomingCalledNumSubstIndex 1.3.6.1.4.1.2011.5.25.1.1.1.7.1.1
This object specifies a number-substitute rule that apply caller number for incoming call. It is valid if its value is between 1 and 2147483647.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..2147483647  

hwVoIncomingCalledNumSubstRowStatus 1.3.6.1.4.1.2011.5.25.1.1.1.7.1.2
This object is used to create a new row or modify or delete an existing row in this table.
Status: current Access: read-write
OBJECT-TYPE    
  EntryStatus  

hwVoOutgoingCallingNumSubstTable 1.3.6.1.4.1.2011.5.25.1.1.1.8
The table stores the number-substitute rule list tag that these number-substitute rule list will be used for incoming-call caller number.The table can hold max 32 rows.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HWVoOutgoingCallingNumSubstEntry

hwVoOutgoingCallingNumSubstEntry 1.3.6.1.4.1.2011.5.25.1.1.1.8.1
A number-substitute rule list tag. One entry per number-substite rule list tag.
Status: current Access: not-accessible
OBJECT-TYPE    
  HWVoOutgoingCallingNumSubstEntry  

hwVoOutgoingCallingNumSubstIndex 1.3.6.1.4.1.2011.5.25.1.1.1.8.1.1
This object specifies a number-substitute rule that apply caller number for incoming call. It is valid if its value is between 1 and 2147483647.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..2147483647  

hwVoOutgoingCallingNumSubstRowStatus 1.3.6.1.4.1.2011.5.25.1.1.1.8.1.2
This object is used to create a new row or modify or delete an existing row in this table.
Status: current Access: read-write
OBJECT-TYPE    
  EntryStatus  

hwVoOutgoingCalledNumSubstTable 1.3.6.1.4.1.2011.5.25.1.1.1.9
The table stores the number-substitute rule list tag that these number-substitute rule list will be used for incoming-call caller number.The table can hold max 32 rows.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HWVoOutgoingCalledNumSubstEntry

hwVoOutgoingCalledNumSubstEntry 1.3.6.1.4.1.2011.5.25.1.1.1.9.1
A number-substitute rule list tag. One entry per number-substite rule list tag.
Status: current Access: not-accessible
OBJECT-TYPE    
  HWVoOutgoingCalledNumSubstEntry  

hwVoOutgoingCalledNumSubstIndex 1.3.6.1.4.1.2011.5.25.1.1.1.9.1.1
This object specifies a number-substitute rule that apply caller number for incoming call. It is valid if its value is between 1 and 2147483647.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..2147483647  

hwVoOutgoingCalledNumSubstRowStatus 1.3.6.1.4.1.2011.5.25.1.1.1.9.1.2
This object is used to create a new row or modify or delete an existing row in this table.
Status: current Access: read-write
OBJECT-TYPE    
  EntryStatus