HUAWEI-IPDSLAM-VMAC-MIB
File:
HUAWEI-IPDSLAM-VMAC-MIB.mib (22631 bytes)
Imported modules
Imported symbols
Defined Types
HwIpDslamVmacAllocationEntry |
|
SEQUENCE |
|
|
|
|
hwIpDslamVmacAllocationIfIndex |
Integer32 |
|
|
hwIpDslamVmacAllocationStartmac |
PhysAddress |
|
|
hwIpDslamVmacAllocationScope |
Integer32 |
|
HwIpDslamVmacUmacMappingEntry |
|
SEQUENCE |
|
|
|
|
hwIpDslamVmacUmacMappingIfIndex |
Integer32 |
|
|
hwIpDslamVmacUmacMappingVmacAddress |
OCTET STRING |
|
|
hwIpDslamVmacUmacMappingUmacAddress |
OCTET STRING |
|
HwOltVmacUmacMappingEntry |
|
SEQUENCE |
|
|
|
|
hwOltVmacUmacMappingIfIndex |
Integer32 |
|
|
hwOltVmacUmacMappingOntID |
Integer32 |
|
|
hwOltVmacUmacMappingVmacAddress |
OCTET STRING |
|
|
hwOltVmacUmacMappingUmacAddress |
OCTET STRING |
|
HwIPoESmacCurrentUserEntry |
|
SEQUENCE |
|
|
|
|
hwIPoESmacUserIndex |
Integer32 |
|
|
hwIPoESmacUserFlowId |
Integer32 |
|
|
hwIPoESmacUserIPAdress |
IpAddress |
|
|
hwIPoESmacSessionUserMac |
OCTET STRING |
|
|
hwIPoESmacVlanID |
Integer32 |
|
Defined Values
hwIpDslamVmac |
1.3.6.1.4.1.2011.6.110 |
The mib module is used for defining VMAC feature, which is a solution to following problems: BRAS MAC address spoofing,
MAC address spoofing among subscribers and two subscribers with the same MAC address cannot access the Internet
if certain network adapters have the same MAC address.
|
MODULE-IDENTITY |
|
|
|
hwIpDslamVmacStatus |
1.3.6.1.4.1.2011.6.110.1 |
Identifies the global status of the VMAC function.
Options:
1. macpoolMode(1) -indicates the global status of the VMAC function is macpoolMode
2. disabled(2) -indicates the global status of the VMAC function is disabled
3. dslamIdMode(3) -indicates the global status of the VMAC function is dslamIdMode
Default: disabled(2)
It is used to query and set the VMAC status.
|
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
macpoolMode(1), disabled(2), dslamIdMode(3) |
|
hwIpDslamVmacPortVmacNum |
1.3.6.1.4.1.2011.6.110.2 |
Identifies the number of VMAC addresses of each port, which is used for
setting or querying the number of VMAC addresses of a port.
Range: 1-32
Default: 32
|
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
1..32 |
|
hwIpDslamVmacAllocationTable |
1.3.6.1.4.1.2011.6.110.3 |
VMAC allocation mapping table.
The indexes of this table are hwIpDslamVmacAllocationIfIndex, hwIpDslamVmacAllocationStartmac
and hwIpDslamVmacAllocationScope.
|
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
HwIpDslamVmacAllocationEntry |
|
hwIpDslamVmacAllocationEntry |
1.3.6.1.4.1.2011.6.110.3.1 |
VMAC allocation mapping table.
The indexes of this entry are hwIpDslamVmacAllocationIfIndex, hwIpDslamVmacAllocationStartmac
and hwIpDslamVmacAllocationScope.
|
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
HwIpDslamVmacAllocationEntry |
|
|
hwIpDslamVmacAllocationIfIndex |
1.3.6.1.4.1.2011.6.110.3.1.1 |
The value of this object uniquely identifies this VMAC allocation mapping table entry.
|
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
hwIpDslamVmacUmacMappingTable |
1.3.6.1.4.1.2011.6.110.4 |
Indicates the mapping relation between the VMAC address and the UMAC address,
which is used to query the mapping relation between the VMAC address and the
UMAC address. The index of this table is hwIpDslamVmacUmacMappingIfIndex.
|
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
HwIpDslamVmacUmacMappingEntry |
|
hwIpDslamVmacUmacMappingEntry |
1.3.6.1.4.1.2011.6.110.4.1 |
Indicates the mapping relation between the VMAC address and the UMAC address,
which is used to query the mapping relation between the VMAC address and the
UMAC address. The index of this entry is hwIpDslamVmacUmacMappingIfIndex.
|
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
HwIpDslamVmacUmacMappingEntry |
|
|
hwIpDslamVmacUmacMappingIfIndex |
1.3.6.1.4.1.2011.6.110.4.1.1 |
Indicates the index of hwIpDslamVmacUmacMappingTable, which is used for specifying
the VMAC address and the UMAC address of a port. It is determined by the shelf ID,
slot ID, and port ID.
|
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
hwIpDslamVmacUmacMappingVmacAddress |
1.3.6.1.4.1.2011.6.110.4.1.2 |
Indicates the VMAC address in hwIpDslamVmacUmacMappingTable. It is a character
string consisting of 1-32 VMAC addresses of a port.
|
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..192) |
|
hwIpDslamVmacUmacMappingUmacAddress |
1.3.6.1.4.1.2011.6.110.4.1.3 |
Indicates the UMAC address in hwIpDslamVmacUmacMappingTable. It is a character
string consisting of 1-32 VMAC addresses of a port.
|
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..192) |
|
hwIpDslamVmacDslamId |
1.3.6.1.4.1.2011.6.110.5 |
Identifies the DSLAM ID, which is used for setting or querying the DSLAM ID.
Range: 0x0-0xFFFFFFFF
Default: 0x7FFFF
When the VMAC function is enabled based on DSLAM ID, the DSLAM ID and the
reserved bits must be configured, and the DSLAM ID must be smaller than or
equal to 0x7FFFF.
|
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
0..4294967295 |
|
hwIpDslamVmacReserveBits |
1.3.6.1.4.1.2011.6.110.6 |
Identifies the reserved bits in a VMAC address, which occupies 6 bits.
|
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
0..255 |
|
hwIpDslamIPoEMacMode |
1.3.6.1.4.1.2011.6.110.7 |
Used for setting and querying the MAC address mode of a dynamic IPoE user.
Options:
1. multiMac(1) -indicates the MAC address mode is multiMac
2. singleMac(2) -indicates the MAC address mode is singleMac
Default: multiMac(1)
|
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
multiMac(1), singleMac(2) |
|
hwIpDslamVmacOltId |
1.3.6.1.4.1.2011.6.110.8 |
Identifies the OLT ID, which is used for setting or querying the OLT ID.
Range: 0x0-0xFFFF
Default: 0xFFFF
When the VMAC function is enabled based on OLT ID, the OLT ID and the
reserved bits must be configured.
|
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
0..65535 |
|
hwIpDslamVmacOntVmacNum |
1.3.6.1.4.1.2011.6.110.9 |
Identifies the number of VMAC addresses of each ONT, which is used for
setting or querying the number of VMAC addresses of an ONT.
Range: 1-8
Default: 8
|
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
1..8 |
|
hwOltVmacUmacMappingTable |
1.3.6.1.4.1.2011.6.110.10 |
Indicates the mapping relation between the VMAC address and the UMAC address,
which is used to query the mapping relation between the VMAC address and the
UMAC address. The indexes of this table are hwOltVmacUmacMappingIfIndex and
hwOltVmacUmacMappingOntID.
|
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
HwOltVmacUmacMappingEntry |
|
hwOltVmacUmacMappingEntry |
1.3.6.1.4.1.2011.6.110.10.1 |
Indicates the mapping relation between the VMAC address and the UMAC address,
which is used to query the mapping relation between the VMAC address and the
UMAC address. The indexes of this entry are hwOltVmacUmacMappingIfIndex and
hwOltVmacUmacMappingOntID.
|
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
HwOltVmacUmacMappingEntry |
|
|
hwOltVmacUmacMappingIfIndex |
1.3.6.1.4.1.2011.6.110.10.1.1 |
Indicates one index of hwOltVmacUmacMappingTable, which is used for specifying
the VMAC address and the UMAC address of an ONT. It is determined by the shelf ID,
slot ID, and port ID.
|
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
hwOltVmacUmacMappingOntID |
1.3.6.1.4.1.2011.6.110.10.1.2 |
Indicates one index of hwOltVmacUmacMappingTable, which is used for specifying
the VMAC address and the UMAC address of an ONT.
|
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
hwOltVmacUmacMappingVmacAddress |
1.3.6.1.4.1.2011.6.110.10.1.3 |
Indicates the VMAC address in hwOltVmacUmacMappingTable. It is a character
string consisting of 1-8 VMAC addresses of an ONT.
|
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..48) |
|
hwOltVmacUmacMappingUmacAddress |
1.3.6.1.4.1.2011.6.110.10.1.4 |
Indicates the UMAC address in hwOltVmacUmacMappingTable. It is a character
string consisting of 1-8 VMAC addresses of an ONT.
|
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..48) |
|
hwIpDslamVmacControlprotocolIpv6oeStatus |
1.3.6.1.4.1.2011.6.110.11 |
It is used to query and set the VMAC control protocol of IPv6oE status.
Options:
1. disable(1) -indicates the VMAC control protocol of IPv6oE status disable
2. enable(2) -indicates the VMAC control protocol of IPv6oE status enable
Default: disable(1)
|
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
disable(1), enable(2) |
|
hwIpDslamVmacSlotNumbering |
1.3.6.1.4.1.2011.6.110.12 |
It is used to query and set the VMAC slot number format.
Options:
1. logical(1) -indicates the VMAC slot number format is logical
2. physical(2) -indicates the VMAC slot number format is physical
3. default(3) -Indicates that the slot number for the port-based VMAC
address is a physical slot number. However, the slot number
for the ONT-based VMAC address is equal to the physical
slot number + 1. That is, for the ONT-based VMAC address,
this parameter does not indicate the physical slot number or
the logical slot number.
Default: default(3)
|
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
logical(1), physical(2), default(3) |
|
hwIpDslamVmacPortBegin |
1.3.6.1.4.1.2011.6.110.13 |
It is used to query and set the starting portid of VMAC.
Range: 0-1, 4294967295
Default: 4294967295
The value 4294967295 indicates that the port-based VMAC starting portid is 0, but
the ONT-based VMAC starting portid is 1
|
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
0..1 | 4294967295 |
|
hwIPoESmacCurrentUserTable |
1.3.6.1.4.1.2011.6.110.14 |
Used for querying the information about a IPoE single-MAC user.
The indexes of this table are ifIndex and hwIPoESmacUserIndex.
|
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
HwIPoESmacCurrentUserEntry |
|
hwIPoESmacCurrentUserEntry |
1.3.6.1.4.1.2011.6.110.14.1 |
Used for querying the information about a IPoE single-MAC user.
The indexes of this entry are ifIndex and hwIPoESmacUserIndex.
|
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
HwIPoESmacCurrentUserEntry |
|
|
hwIPoESmacSessionUserMac |
1.3.6.1.4.1.2011.6.110.14.1.4 |
IPoE SMAC user MAC address.
|
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(6) |
|
hwIPoESmacVlanID |
1.3.6.1.4.1.2011.6.110.14.1.5 |
IPoE SMAC user VLAN.
|
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
1..4093 |
|