EquipTbl-MIB

File: EquipTbl-MIB.mib (12057 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC Chromatis-MIB
RFC1213-MIB

Imported symbols

OBJECT-TYPE Counter32 Integer32
DateAndTime TruthValue chrComHwNe
DisplayString

Defined Values

chrComHwNeId 1.3.6.1.4.1.3695.1.1.1.1
A unique ID of each NE, given to NE in its installation.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

chrComHwNeType 1.3.6.1.4.1.3695.1.1.1.2
Metropolis2000 - Terminal Metropolis2500 - Enhanced Terminal Metropolis4000 - Standard HE Metropolis4500 - Enhanced HE.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER metropolis2000(1), metropolis2500(2), metropolis4000(3), metropolis4500(4)  

chrComHwNeRunningSwVersion 1.3.6.1.4.1.3695.1.1.1.3
The NE running SW Version - represented by XX.YY.ZZZ
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..9)  

chrComHwNeAvailableSwVersion 1.3.6.1.4.1.3695.1.1.1.4
List of SW versions that might be switched with the current running one - represented by list of: XX.YY.ZZZ
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..18)  

chrComHwNeNextSessionSwVersion 1.3.6.1.4.1.3695.1.1.1.5
The SW Version that shall be switched with the current running one - represented by XX.YY.ZZZ
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..9)  

chrComHwNeRunningConfigurationSet 1.3.6.1.4.1.3695.1.1.1.6
The current configuration file
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..12)  

chrComHwNeAvailableConfigurationSets 1.3.6.1.4.1.3695.1.1.1.7
List configuration files that might be switched with the current one used by the running software.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..120)  

chrComHwNeNextSessionConfigurationSet 1.3.6.1.4.1.3695.1.1.1.8
The configuration file that shall be switched with the current one.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..12)  

chrComHwNeTimeofDay 1.3.6.1.4.1.3695.1.1.1.9
The NE Time of Day represented by - MM-DD-YYYY HH:MM:SS
Status: current Access: read-write
OBJECT-TYPE    
  DateAndTime  

chrComHwNeDailyPMStartOfTime 1.3.6.1.4.1.3695.1.1.1.10
Describes the PM loging start time
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..23  

chrComHwNeCriticalAlarmCounter 1.3.6.1.4.1.3695.1.1.1.11
Specifies the number of Critical Alarms for the NE.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

chrComHwNeMajorAlarmCounter 1.3.6.1.4.1.3695.1.1.1.12
Specifies the number of Major Alarms for the NE.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

chrComHwNeMinorAlarmCounter 1.3.6.1.4.1.3695.1.1.1.13
Specifies the number of Minor Alarms for the NE.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

chrComHwNeDetectionFaultStabilizationTime 1.3.6.1.4.1.3695.1.1.1.14
The time the NE waits before reporting an occurrence of alarm to the NMS.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..50  

chrComHwNeRemovalFaultStabilizationTime 1.3.6.1.4.1.3695.1.1.1.15
The time the NE waits before reporting clearing of alarm to NMS.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..150  

chrComHwNeAlarmCutOffStatus 1.3.6.1.4.1.3695.1.1.1.16
Alarm Cut Off current status.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

chrComHwNeAtmfM4NeSuppressZeroStats 1.3.6.1.4.1.3695.1.1.1.17
When the vaule of this type is true, no PM entry will be created in any of the historical statistics tables for intervals in which all counts are zero
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

chrComHwNeResetPMCountersAction 1.3.6.1.4.1.3695.1.1.1.18
This action enables resetting all preformance management counters currently measured by the NE (reset all xxxCurrentTable primitives). Note that PM might be reset also per entity (e.g. per one specifc Sonet Line interface). This value is set to True for activation of the reset action. On completion the NE sets back to False.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

chrComHwNeACOActivationAction 1.3.6.1.4.1.3695.1.1.1.19
Alarm Cut Off activation operation. This value is set to True for activation of the ACO action. On completion the NE sets back to False.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

chrComHwNeAtmCbrRatesList 1.3.6.1.4.1.3695.1.1.1.20
This vector includes 32 CBR peak cell rates that are supported in the network.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..128)  

chrComHwNeAtmRtVbrRatesList 1.3.6.1.4.1.3695.1.1.1.21
This vector includes the 16 RT-VBR Sustainable cell rates that are supported in the network.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

chrComHwNeMaxPathPM 1.3.6.1.4.1.3695.1.1.1.22
The maximum number of paths for which PM might be collected.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..65535  

chrComHwNeCurrentPathPM 1.3.6.1.4.1.3695.1.1.1.23
The actual number of paths for which PM is currently collected.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..65535  

chrComHwNeGlobalSubnetID 1.3.6.1.4.1.3695.1.1.1.24
Array of two entries: Subnet #1 Global ID, Subnet #2 Global ID.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..8)