EMPIRE-CALPARA-MIB
File:
EMPIRE-CALPARA-MIB.mib (79940 bytes)
Imported modules
Imported symbols
Defined Types
Defined Values
calpara |
1.3.6.1.4.1.546.16.53 |
This MIB is for IBM Logical Partition management.
It is implemented by the SystemEDGE AIM for LPAR Monitoring (calpara). |
MODULE-IDENTITY |
|
|
|
empire |
1.3.6.1.4.1.546 |
OBJECT IDENTIFIER |
|
|
|
unix |
1.3.6.1.4.1.546.1 |
OBJECT IDENTIFIER |
|
|
|
traps |
1.3.6.1.4.1.546.9 |
OBJECT IDENTIFIER |
|
|
|
sysmgmt |
1.3.6.1.4.1.546.1.1 |
OBJECT IDENTIFIER |
|
|
|
lparAimInstanceCount |
1.3.6.1.4.1.546.16.53.1.1 |
Number of LPAR Instances in lparAimInstanceTable. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
lparAimInstanceEntry |
1.3.6.1.4.1.546.16.53.1.2.1 |
The LPAR Instances Table entry. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
LparAimInstanceRow |
|
|
lparAimInstanceUID |
1.3.6.1.4.1.546.16.53.1.2.1.1 |
LPAR Instance unique identifier. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
1..2147483647 |
|
lparAimInstanceRowStatus |
1.3.6.1.4.1.546.16.53.1.2.1.7 |
The row status according to the Textual Conventions for SMIv2 (see RFC 2579).
active(1) - the row is available for usage
notInService(2) - setting to this value disables usage of the row
notReady(3) - an error occured during usage of the row
createAndGo(4) - setting to this value creates the row with row status set to active(1)
createAndWait(5) - setting to this value creates the row with row status set to notInService(2)
destroy(6) - setting to this value deletes the row |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
RowStatus |
|
|
lparAimInstanceDataStatus |
1.3.6.1.4.1.546.16.53.1.2.1.8 |
The status of data of the LPAR Instance (Server), i.e. status of Aim caches for the instance.
ready(1) - data are ready in Aim cache, caches were populated
notReady(2) - data are Not ready, caches were not populated yet
hostUnreachable(3) - HMC host unreachable, data are kept in Aim caches
authenticationFailed(4) - authentication failed for HMC host, data are kept in Aim caches
unknownError(5) - unknow error, data are kept in Aim caches |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
ready(1), notReady(2), hostUnreachable(3), authenticationFailed(4), unknownError(5) |
|
lparAimCfgGenPollInterval |
1.3.6.1.4.1.546.16.53.2.3 |
The time (in seconds) between the polling by the Agent.
Valid values are greater than or equal to 300 seconds. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
lparAimStatSysTable |
1.3.6.1.4.1.546.16.53.3.2.1 |
A table containing the servers the LPAR Plugin monitors. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
LparAimStatSysRow |
|
lparAimStatSysEntry |
1.3.6.1.4.1.546.16.53.3.2.1.1 |
The table entry of servers the LPAR Plugin monitors. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
LparAimStatSysRow |
|
|
lparAimStatSysStatus |
1.3.6.1.4.1.546.16.53.3.2.1.1.5 |
The Status of the System. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
unknown(1), initializing(2), ready(3), no-power(4), error(5), incomplete(6), no-connection(7), recovery(8), version-mismatch(9), cuod-cta(10), operating(11) |
|
lparAimStatSysSPVer |
1.3.6.1.4.1.546.16.53.3.2.1.1.9 |
The Service Processor Version running on the System. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
lparAimStatSysMaxPartition |
1.3.6.1.4.1.546.16.53.3.2.1.1.10 |
The Maximum number of logical partitions possible on the System. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
lparAimStatSysFreeMem |
1.3.6.1.4.1.546.16.53.3.2.1.1.13 |
The free memory ( MB ) available on the System. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
lparAimStatSysCpuCODCapable |
1.3.6.1.4.1.546.16.53.3.2.1.1.14 |
Indicates whether system is CPU Capacity On Demand capable. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
unknown(1), yes(2), no(3) |
|
lparAimStatSysMemCODCapable |
1.3.6.1.4.1.546.16.53.3.2.1.1.15 |
Indicates whether system is Memory Capacity On Demand capable. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
unknown(1), yes(2), no(3) |
|
lparAimStatSysOS400Capable |
1.3.6.1.4.1.546.16.53.3.2.1.1.16 |
Indicates whether system is OS400 capable. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
unknown(1), yes(2), no(3) |
|
lparAimStatSysMicroLPCapable |
1.3.6.1.4.1.546.16.53.3.2.1.1.17 |
Indicates whether system is Micro LPAR capable. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
unknown(1), yes(2), no(3) |
|
lparAimStatSysVirtualIOCapable |
1.3.6.1.4.1.546.16.53.3.2.1.1.18 |
Indicates whether system is Virtual IO capable. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
unknown(1), yes(2), no(3) |
|
lparAimStatSysLMBSize |
1.3.6.1.4.1.546.16.53.3.2.1.1.19 |
The size of one logical memory block (LMB), in megabytes. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
lparAimStatSysLoad |
1.3.6.1.4.1.546.16.53.3.2.1.1.20 |
The Managed System Partitions Average Load (Run queue size). Value is Average Load multiplied by 100 |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
lparAimStatSysFiveLoad |
1.3.6.1.4.1.546.16.53.3.2.1.1.21 |
The Managed System Partitions 5 minute Average Load (Run queue size). Value is Actual FiveLoad multiplied by 100 |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
lparAimStatSysFifteenLoad |
1.3.6.1.4.1.546.16.53.3.2.1.1.22 |
The Managed System Partitions 15 minute Average Load (Run queue size). Value is Actual FifteenLoad multiplied by 100 |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
lparAimStatSysCPU |
1.3.6.1.4.1.546.16.53.3.2.1.1.24 |
The Managed System Partitions Overall CPU. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
lparAimStatSysMem |
1.3.6.1.4.1.546.16.53.3.2.1.1.26 |
The Managed System Partitions Memory Usage. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
lparAimStatSysMemAverage |
1.3.6.1.4.1.546.16.53.3.2.1.1.27 |
The Managed System Partitions Average Memory Usage. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
lparAimStatSysEntC |
1.3.6.1.4.1.546.16.53.3.2.1.1.36 |
Average Entitlement Capacity for the running Partitions on this Managed System |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
lparAimStatSysLparMem |
1.3.6.1.4.1.546.16.53.3.2.1.1.42 |
Memory available for partition creation (total installed - firmware used). |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
lparAimStatLPCount |
1.3.6.1.4.1.546.16.53.3.3.1 |
The number of currently monitored logical partitions. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
lparAimStatLPTable |
1.3.6.1.4.1.546.16.53.3.3.2 |
A table containing the partitions which are being monitored. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
LparAimStatLPRow |
|
lparAimStatLPEntry |
1.3.6.1.4.1.546.16.53.3.3.2.1 |
The table entry. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
LparAimStatLPRow |
|
|
lparAimStatLPUID |
1.3.6.1.4.1.546.16.53.3.3.2.1.3 |
The unique identifier for the logical partition. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
1..2147483647 |
|
lparAimStatLPId |
1.3.6.1.4.1.546.16.53.3.3.2.1.4 |
The identifier for the logical partition. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
1..2147483647 |
|
lparAimStatLPStatus |
1.3.6.1.4.1.546.16.53.3.3.2.1.8 |
The status of logical partition. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
unknown(1), ready(2), starting(3), running(4), error(5), not-activated(6), open-firmware(7) |
|
lparAimStatLPCapable |
1.3.6.1.4.1.546.16.53.3.3.2.1.9 |
The flag indicating if the logical Partition is DLPAR capable. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
unknown(1), yes(2), no(3) |
|
lparAimStatLPProcMin |
1.3.6.1.4.1.546.16.53.3.3.2.1.10 |
The minimum number of processing units that needs to be allocated to the logical partition. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
lparAimStatLPProcMax |
1.3.6.1.4.1.546.16.53.3.3.2.1.11 |
The maximum number of processing units that can be allocated to the logical partition. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
lparAimStatLPProcCur |
1.3.6.1.4.1.546.16.53.3.3.2.1.12 |
The current number of processing units that is allocated to the logical partition. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
lparAimStatLPMemMin |
1.3.6.1.4.1.546.16.53.3.3.2.1.13 |
The minimum amount of memory in MB that needs to be allocated to the logical partition. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
lparAimStatLPMemMax |
1.3.6.1.4.1.546.16.53.3.3.2.1.14 |
The maximum amount of memory in MB that can be allocated to the logical partition. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
lparAimStatLPMemCur |
1.3.6.1.4.1.546.16.53.3.3.2.1.15 |
The current amount of memory in MB that is allocated to the logical partition. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
lparAimStatLPLoad |
1.3.6.1.4.1.546.16.53.3.3.2.1.16 |
The Load Average of the logical partition. Value is Actual Load multiplied by 100 |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
lparAimStatLPFiveLoad |
1.3.6.1.4.1.546.16.53.3.3.2.1.17 |
The 5-minute Load Average of the logical partition. Value is Actual FiveLoad multiplied by 100 |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
lparAimStatLPFifteenLoad |
1.3.6.1.4.1.546.16.53.3.3.2.1.18 |
The 15-minute Load Average of the logical partition. Value is Actual FifteenLoad multiplied by 100 |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
lparAimStatLPIP |
1.3.6.1.4.1.546.16.53.3.3.2.1.22 |
The IP Address of the logical partition. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
lparAimStatLPNumCPUs |
1.3.6.1.4.1.546.16.53.3.3.2.1.23 |
The processing units of the logical partition. Value displayed multiplied by 100. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
lparAimStatLPPhyProcConsumed |
1.3.6.1.4.1.546.16.53.3.3.2.1.24 |
The physical processor consumed by the logical partition (summation not average). |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
lparAimStatLPCPUPhyBusy |
1.3.6.1.4.1.546.16.53.3.3.2.1.25 |
The percentage of time (over the sample period) the logical partition CPU was busy. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
lparAimStatLPCPUIdle |
1.3.6.1.4.1.546.16.53.3.3.2.1.26 |
The percentage of time (over the sample period) the CPU of the logical partition was idle.
This value is only available for Virtual I/O server. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..100 |
|
lparAimStatLPCPUSysTime |
1.3.6.1.4.1.546.16.53.3.3.2.1.27 |
The percentage of time (over the sample period) the CPU of logical partition was executing kernel
or operating system. This value is only available for Virtual I/O server. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..100 |
|
lparAimStatLPCPUUserTime |
1.3.6.1.4.1.546.16.53.3.3.2.1.28 |
The percentage of time (over the sample period) the CPU of logical partition was executing in
user mode. This value is only available for Virtual I/O server. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..100 |
|
lparAimStatLPCPUIOWait |
1.3.6.1.4.1.546.16.53.3.3.2.1.29 |
The percentage of time (over the sample period) the CPU of logical partition was waiting for I/O.
This value is only available for Virtual I/O server. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..100 |
|
lparAimStatLPNumLogicalCPU |
1.3.6.1.4.1.546.16.53.3.3.2.1.30 |
The number of allocated logical CPU to the logical partition.
This value is only available forVirtual I/O server. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
lparAimStatLPCPUUsage |
1.3.6.1.4.1.546.16.53.3.3.2.1.31 |
The CPU usage of the LPAR. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Gauge32 |
0..100 |
|
lparAimStatLPLMB |
1.3.6.1.4.1.546.16.53.3.3.2.1.34 |
The Number of Logical Memory Blocks allocated to the logical partition. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
lparAimStatLPMemoryUsage |
1.3.6.1.4.1.546.16.53.3.3.2.1.35 |
The memory usage of the logical partition. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Gauge32 |
0..100 |
|
lparAimStatLPEntC |
1.3.6.1.4.1.546.16.53.3.3.2.1.50 |
The percentage of entitle capacity consumed by the partition.
This value is available if the partition is running with shared processor.
Since the time base over which this data is computed vary, this value can
sometimes exceed 100%. This excess is noticed only for small sampling period. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
lparAimStatLPNumDiskDrives |
1.3.6.1.4.1.546.16.53.3.3.2.1.52 |
The Number of Disk Drives in the partition.
This value is only available for Virtual I/O server. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
lparAimStatLPNumDrivePaths |
1.3.6.1.4.1.546.16.53.3.3.2.1.53 |
The Number of Drive Paths in the partition.
This value is only available for Virtual I/O server. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
lparAimStatLPNumVDisks |
1.3.6.1.4.1.546.16.53.3.3.2.1.54 |
The Number of Virtual Disks in the partition.
This value is only available for Virtual I/O server. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
lparAimStatLPOs |
1.3.6.1.4.1.546.16.53.3.3.2.1.59 |
Installed OS version UNIX(aix/linux) / VIO Server. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
lparAimStatLPCurVProc |
1.3.6.1.4.1.546.16.53.3.3.2.1.61 |
The desired number of virtual processors allocated to the shared mode partition. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
lparAimStatLPMaxVProc |
1.3.6.1.4.1.546.16.53.3.3.2.1.62 |
The max number of virtual processors allocated to the shared mode partition. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
lparAimStatLPMinVProc |
1.3.6.1.4.1.546.16.53.3.3.2.1.63 |
The minimum number of virtual processors allocated to the shared mode partition. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
lparAimStatSlotCount |
1.3.6.1.4.1.546.16.53.3.4.1 |
The number of currently monitored Slots. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
lparAimStatSlotEntry |
1.3.6.1.4.1.546.16.53.3.4.2.1 |
The table entry. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
LparAimStatSlotRow |
|
|
lparAimStatSlotUID |
1.3.6.1.4.1.546.16.53.3.4.2.1.3 |
The Slot unique identifier. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
1..2147483647 |
|
lparAimStatProfEntry |
1.3.6.1.4.1.546.16.53.3.5.2.1 |
The table entry. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
LparAimStatProfRow |
|
|
lparAimStatProfUID |
1.3.6.1.4.1.546.16.53.3.5.2.1.3 |
The unique identifier of the profile. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
1..2147483647 |
|
lparAimStatProfLP |
1.3.6.1.4.1.546.16.53.3.5.2.1.6 |
The partition to which the profile is associated with. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
SnmpAdminString |
Size(20) |
|
lparAimStatProfMaxCPU |
1.3.6.1.4.1.546.16.53.3.5.2.1.8 |
The Maximum number of processors that partition can have. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
lparAimStatProfMinCPU |
1.3.6.1.4.1.546.16.53.3.5.2.1.9 |
The Minimum number of processors that partition should have. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
lparAimStatProfDesCPU |
1.3.6.1.4.1.546.16.53.3.5.2.1.10 |
The Desired number of processors that partition should have. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
lparAimStatProfMaxMem |
1.3.6.1.4.1.546.16.53.3.5.2.1.11 |
The Maximum memory ( MB ) that partition can have. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
lparAimStatProfMinMem |
1.3.6.1.4.1.546.16.53.3.5.2.1.12 |
The Minimum memory (MB) that partition should have. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
lparAimStatProfDesMem |
1.3.6.1.4.1.546.16.53.3.5.2.1.13 |
The Desired memory ( MB ) that partition should have. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
lparAimStatSysProfEntry |
1.3.6.1.4.1.546.16.53.3.6.2.1 |
The table entry. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
LparAimStatSysProfRow |
|
|
lparAimStatSysProfUID |
1.3.6.1.4.1.546.16.53.3.6.2.1.3 |
The System Profile's unique identifier. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
1..2147483647 |
|
lparAimStatvSCSICount |
1.3.6.1.4.1.546.16.53.3.7.1 |
The number of virtual SCSI devices hosted in the system. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
lparAimStatvSCSIEntry |
1.3.6.1.4.1.546.16.53.3.7.2.1 |
The table entry. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
LparAimStatvSCSIRow |
|
|
lparAimStatvSCSIUID |
1.3.6.1.4.1.546.16.53.3.7.2.1.3 |
The VSCSI's unique identifier. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
1..2147483647 |
|
lparAimStatvSCSILPAR |
1.3.6.1.4.1.546.16.53.3.7.2.1.4 |
The name of the LPAR the virtual SCSI device is being hosted on. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
SnmpAdminString |
Size(20) |
|
lparAimStatvSCSILPARID |
1.3.6.1.4.1.546.16.53.3.7.2.1.5 |
The ID of the LPAR the virtual SCSI device is being hosted on. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
lparAimStatvSCSIIsRequired |
1.3.6.1.4.1.546.16.53.3.7.2.1.11 |
Indicates if the virtual SCSI device is required for the logical partition.
Valid values are yes and no. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
lparAimStatvEthernetCount |
1.3.6.1.4.1.546.16.53.3.8.1 |
The number of virtual Ethernet devices hosted in the system. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
lparAimStatvEthernetEntry |
1.3.6.1.4.1.546.16.53.3.8.2.1 |
The table entry. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
LparAimStatvEthernetRow |
|
|
lparAimStatvEthernetUID |
1.3.6.1.4.1.546.16.53.3.8.2.1.3 |
The VEthernet's unique identifier. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
1..2147483647 |
|
lparAimStatvEthernetLPAR |
1.3.6.1.4.1.546.16.53.3.8.2.1.4 |
The name of the LPAR the virtual Ethernet device is being hosted on. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
SnmpAdminString |
Size(20) |
|
lparAimStatvEthernetIsTrunk |
1.3.6.1.4.1.546.16.53.3.8.2.1.10 |
Indicates if the virtual Ethernet adapter is the trunk or uplink adapter for the virtual LAN.
Valid values are yes and no. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
lparAimStatvEthernetIsRequired |
1.3.6.1.4.1.546.16.53.3.8.2.1.11 |
Indicates if the virtual Ethernet device is required for the logical partition.
Valid values are yes and no. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
lparAimStatvSerialCount |
1.3.6.1.4.1.546.16.53.3.9.1 |
The number of virtual serial devices hosted in the system. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
lparAimStatvSerialEntry |
1.3.6.1.4.1.546.16.53.3.9.2.1 |
The table entry. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
LparAimStatvSerialRow |
|
|
lparAimStatvSerialUID |
1.3.6.1.4.1.546.16.53.3.9.2.1.3 |
The virtual SCSI's unique identifier. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
1..2147483647 |
|
lparAimStatvSerialLPAR |
1.3.6.1.4.1.546.16.53.3.9.2.1.4 |
The name of the LPAR the virtual serial device is being hosted on. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
SnmpAdminString |
Size(20) |
|
lparAimStatvSerialIsRequired |
1.3.6.1.4.1.546.16.53.3.9.2.1.12 |
Indicates if the virtual Serial device is required for the logical partition.
Valid values are yes and no. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
lparAimStatvDiskCount |
1.3.6.1.4.1.546.16.53.3.10.1 |
The number of physical disk on Virtual I/O Server. Only those disks are displayed,
which has PhysicalVolume parameter specified. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
lparAimStatvDiskEntry |
1.3.6.1.4.1.546.16.53.3.10.2.1 |
The table entry. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
LparAimStatvDiskRow |
|
|
lparAimStatvDiskUID |
1.3.6.1.4.1.546.16.53.3.10.2.1.3 |
The unique identifier of physical disk. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
1..2147483647 |
|
lparAimStatvDiskLPARID |
1.3.6.1.4.1.546.16.53.3.10.2.1.4 |
LPAR identification number to which this disk belongs to. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(20) |
|
lparAimStatvDiskActivePercent |
1.3.6.1.4.1.546.16.53.3.10.2.1.7 |
The percentage of time the physical disk was active(bandwidth utilization for the drive). |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
lparAimStatvDiskKBPS |
1.3.6.1.4.1.546.16.53.3.10.2.1.8 |
The amount of data transferred (read or written) to the drive in KB per second. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
lparAimStatvDiskTPS |
1.3.6.1.4.1.546.16.53.3.10.2.1.9 |
The number of transfers per second that were issued to the physical disk.
A transfer is an I/O request to the physical disk. Multiple logical requests can be
combined into a single I/O request to the disk. A transfer is of indeterminate size. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
lparAimSysDown |
1.3.6.1.4.1.546.1.1.165315 |
The system down trap. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
lparAimSysDelete |
1.3.6.1.4.1.546.1.1.165316 |
The system delete trap. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
lparAimSysAdd |
1.3.6.1.4.1.546.1.1.165317 |
The system added trap. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
lparAimLPAdd |
1.3.6.1.4.1.546.1.1.165321 |
The LP added trap. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
lparAimLPDelete |
1.3.6.1.4.1.546.1.1.165322 |
The LP deleted Trap. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
lparAimSlotAdd |
1.3.6.1.4.1.546.1.1.165340 |
The Slot added trap. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
lparAimSlotDelete |
1.3.6.1.4.1.546.1.1.165341 |
The Slot deleted trap. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
lparAimSlotLPChange |
1.3.6.1.4.1.546.1.1.165342 |
The Slot partition change trap. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
lparAimProfAdd |
1.3.6.1.4.1.546.1.1.165350 |
The profile added trap. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
lparAimProfDelete |
1.3.6.1.4.1.546.1.1.165351 |
The profile deleted trap. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
lparAimSysProfAdd |
1.3.6.1.4.1.546.1.1.165360 |
The system profile added trap. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
lparAimSysProfDelete |
1.3.6.1.4.1.546.1.1.165361 |
The system profile deleted trap. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
lparAimSysProfChange |
1.3.6.1.4.1.546.1.1.165362 |
The system profile change trap. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
lparAimVIOvSCSIAdd |
1.3.6.1.4.1.546.1.1.165370 |
The VIO Server SCSI added trap. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
lparAimVIOvSCSIDelete |
1.3.6.1.4.1.546.1.1.165371 |
The VIO Server SCSI deleted trap. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
lparAimVIOvEthernetAdd |
1.3.6.1.4.1.546.1.1.165373 |
The VIO Server Ethernet added trap. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
lparAimVIOvEthernetDelete |
1.3.6.1.4.1.546.1.1.165374 |
The VIO Server Ethernet deleted trap. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
lparAimVIOvSerialAdd |
1.3.6.1.4.1.546.1.1.165375 |
The VIO Server Serial added trap. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
lparAimVIOvSerialDelete |
1.3.6.1.4.1.546.1.1.165376 |
The VIO Server Serial deleted trap. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
lparAimInstanceAddTrap |
1.3.6.1.4.1.546.1.1.165380 |
LPAR Instance added trap. This trap will be sent when a new LPAR Instance is added,
and data in Aim caches were updated according to that change. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
lparAimInstanceDeleteTrap |
1.3.6.1.4.1.546.1.1.165381 |
LPAR Instance deleted trap. This trap will be sent when a LPAR Instance is deleted,
and data in Aim caches were updated according to that change. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
lparAimInstanceDataStatusChangeTrap |
1.3.6.1.4.1.546.1.1.165382 |
LPAR Instance data status change trap. This trap will be sent when data status of
LPAR Instance is changed, and data in Aim caches were updated according to that change.
The first DataStatus var is an old value, the second one holds a new value. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|