ELTEX-MES-IF-EXTENSION-MIB
File:
ELTEX-MES-IF-EXTENSION-MIB.mib (9421 bytes)
Imported modules
Imported symbols
Defined Types
EltIfDot1qIngressCvlanEntry |
|
SEQUENCE |
|
|
|
|
eltIfDot1qIngressCvlanTag |
Integer32 |
|
EltIfDot1qCustomIngressEtherTypeEntry |
|
SEQUENCE |
|
|
|
|
eltIfDot1qCustomIngressEtherType1 |
Integer32 |
|
|
eltIfDot1qCustomIngressEtherType2 |
Integer32 |
|
|
eltIfDot1qCustomIngressEtherType3 |
Integer32 |
|
|
eltIfDot1qCustomIngressEtherType4 |
Integer32 |
|
|
eltIfDot1qCustomIngressEtherType5 |
Integer32 |
|
|
eltIfDot1qCustomIngressEtherType6 |
Integer32 |
|
|
eltIfDot1qCustomIngressEtherType7 |
Integer32 |
|
Defined Values
eltIfDot1qCustomEgressEtherTypeEntry |
1.3.6.1.4.1.35265.1.23.1.276.1.3.1.1 |
An entry containing the custom egress EtherType
information for the interface.
Only interfaces with custom 802.1q
ethertype control are listed in the
table. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
EltIfDot1qCustomEgressEtherTypeEntry |
|
|
eltIfDot1qCustomEgressEtherType |
1.3.6.1.4.1.35265.1.23.1.276.1.3.1.1.1 |
The Dot1qEtherType allow administrator
to select a non-standard (other than 0x8100)
2-byte ethertype for the interface to
interoperate with third party vendor's system
that do not use the standard 0x8100 ethertype
to identify 802.1q-tagged frames.
The current administrative value of the
802.1q ethertype for the interface. The
administrative 802.1q ethertype value may
differ from the operational 802.1q ethertype
value. On some platforms, 802.1q ethertype
may be assigned per group rather than per port.
If multiple ports belong to a port group,
the 802.1q ethertype assigned to any of
the ports in such group will apply to all
ports in the same group.
To configure non-standard dot1q egress ethertype
is only recommended when the Eltex device
is connected to any third party vendor device. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..65535 |
|
eltIfDot1qIngressCvlanEntry |
1.3.6.1.4.1.35265.1.23.1.276.1.4.1.1 |
An entry containing ingress C-VLAN assignment
for the interface. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
EltIfDot1qIngressCvlanEntry |
|
|
eltIfDot1qIngressCvlanTag |
1.3.6.1.4.1.35265.1.23.1.276.1.4.1.1.1 |
C-VLAN tag for the interface assigned
in ingress pipe. 0 means no C-VLAN assignment. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..4095 |
|
eltIfDot1qCustomIngressEtherTypeEntry |
1.3.6.1.4.1.35265.1.23.1.276.1.3.2.1 |
An entry containing the custom ingress EtherTypes
set for the interface to classify stag and ctag.
Only interfaces with custom 802.1q
ethertype control are listed in the
table. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
EltIfDot1qCustomIngressEtherTypeEntry |
|
|
eltIfDot1qCustomIngressEtherType1 |
1.3.6.1.4.1.35265.1.23.1.276.1.3.2.1.1 |
This fields holds default ethertype 0x8100 or zero
if ethertype 0x8100 is not used to classify SVLAN on
current interface. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0 | 33024 |
|
eltIfDot1qCustomIngressEtherType2 |
1.3.6.1.4.1.35265.1.23.1.276.1.3.2.1.2 |
The custom ethertype to classify ingress vlan tags (SVLAN)
for the interface to interoperate with third party vendor's
system that do not use the standard 0x8100 ethertype
to identify 802.1q-tagged frames. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..33023 | 33025..65535 |
|
eltIfDot1qCustomIngressEtherType3 |
1.3.6.1.4.1.35265.1.23.1.276.1.3.2.1.3 |
The custom ethertype to classify ingress vlan tags (SVLAN)
for the interface to interoperate with third party vendor's
system that do not use the standard 0x8100 ethertype
to identify 802.1q-tagged frames. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..33023 | 33025..65535 |
|
eltIfDot1qCustomIngressEtherType4 |
1.3.6.1.4.1.35265.1.23.1.276.1.3.2.1.4 |
The custom ethertype to classify ingress vlan tags (SVLAN)
for the interface to interoperate with third party vendor's
system that do not use the standard 0x8100 ethertype
to identify 802.1q-tagged frames. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..33023 | 33025..65535 |
|
eltIfDot1qCustomIngressEtherType5 |
1.3.6.1.4.1.35265.1.23.1.276.1.3.2.1.5 |
The custom ethertype to classify ingress vlan tags (SVLAN)
for the interface to interoperate with third party vendor's
system that do not use the standard 0x8100 ethertype
to identify 802.1q-tagged frames. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..33023 | 33025..65535 |
|
eltIfDot1qCustomIngressEtherType6 |
1.3.6.1.4.1.35265.1.23.1.276.1.3.2.1.6 |
The custom ethertype to classify ingress vlan tags (SVLAN)
for the interface to interoperate with third party vendor's
system that do not use the standard 0x8100 ethertype
to identify 802.1q-tagged frames. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..33023 | 33025..65535 |
|
eltIfDot1qCustomIngressEtherType7 |
1.3.6.1.4.1.35265.1.23.1.276.1.3.2.1.7 |
The custom ethertype to classify ingress vlan tags (SVLAN)
for the interface to interoperate with third party vendor's
system that do not use the standard 0x8100 ethertype
to identify 802.1q-tagged frames. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..33023 | 33025..65535 |
|