Dell-HWENVIROMENT
File:
Dell-HWENVIROMENT.mib (11178 bytes)
Imported modules
Imported symbols
Defined Types
RlEnvMonState |
|
Represents the state of a device being monitored.
Valid values are:
normal(1): the environment is good, such as low
temperature.
warning(2): the environment is bad, such as temperature
above normal operation range but not too
high.
critical(3): the environment is very bad, such as
temperature much higher than normal
operation limit.
shutdown(4): the environment is the worst, the system
should be shutdown immediately.
notPresent(5): the environmental monitor is not present,
such as temperature sensors do not exist.
notFunctioning(6): the environmental monitor does not
function properly, such as a temperature
sensor generates a abnormal data like
1000 C.
|
TEXTUAL-CONVENTION |
|
|
|
|
INTEGER |
normal(1), warning(2), critical(3), shutdown(4), notPresent(5), notFunctioning(6) |
|
RlEnvMonDirection |
|
Represents the state of a device being monitored.
Valid values are:
unKnown(1): if the board not support air flow direction.
frontToBack(2): the air flow direction of the fan is front to back.
backToFront(3): the air flow direction of the fan is back to front.
clockwise(4): the air flow direction of the fan is clock wise
unClockwise(5): the air flow direction of the fan is unclock wise
insideOutside(6): the air flow direction of the fan is inside outside
outsideInside(7): the air flow direction of the fan is outside inside
rightToLeft(8): the air flow direction of the fan is from right to left
leftToRight(9): the air flow direction of the fan is from left to right
|
TEXTUAL-CONVENTION |
|
|
|
|
INTEGER |
unKnown(1), frontToBack(2), backToFront(3), clockwise(4), unClockwise(5), insideOut(6), outsideIn(7), rightToLeft(8), leftToRight(9) |
|
RlEnvMonFanStatusEntry |
|
SEQUENCE |
|
|
|
|
rlEnvMonFanStatusIndex |
INTEGER |
|
|
rlEnvMonFanStatusDescr |
DisplayString |
|
|
rlEnvMonFanState |
RlEnvMonState |
|
RlEnvMonSupplyStatusEntry |
|
SEQUENCE |
|
|
|
|
rlEnvMonSupplyStatusIndex |
INTEGER |
|
|
rlEnvMonSupplyStatusDescr |
DisplayString |
|
|
rlEnvMonSupplyState |
RlEnvMonState |
|
|
rlEnvMonSupplySource |
INTEGER |
|
|
rlEnvMonSupplyFanDirection |
RlEnvMonDirection |
|
RlEnvFanDataEntry |
|
SEQUENCE |
|
|
|
|
rlEnvFanDataStackUnit |
INTEGER |
|
|
rlEnvFanDataTemp |
INTEGER |
|
|
rlEnvFanDataSpeed |
INTEGER |
|
|
rlEnvFanDataOperLevel |
INTEGER |
|
|
rlEnvFanDataAdminLevel |
INTEGER |
|
|
rlEnvFanDataDirection |
RlEnvMonDirection |
|
Defined Values
rlEnv |
1.3.6.1.4.1.89.83 |
The private MIB module definition for environment of Dell devices. |
MODULE-IDENTITY |
|
|
|
rlEnvMonFanStatusEntry |
1.3.6.1.4.1.89.83.1.1.1 |
An entry in the fan status table, representing the status of
the associated fan maintained by the environmental monitor. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
RlEnvMonFanStatusEntry |
|
|
rlEnvMonFanStatusIndex |
1.3.6.1.4.1.89.83.1.1.1.1 |
Unique index for the fan being instrumented.
This index is for SNMP purposes only, and has no
intrinsic meaning. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rlEnvMonFanStatusDescr |
1.3.6.1.4.1.89.83.1.1.1.2 |
Textual description of the fan being instrumented.
This description is a short textual label, suitable as a
human-sensible identification for the rest of the
information in the entry. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..32) |
|
rlEnvMonFanState |
1.3.6.1.4.1.89.83.1.1.1.3 |
The mandatory state of the fan being instrumented. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
RlEnvMonState |
|
|
rlEnvMonSupplyStatusEntry |
1.3.6.1.4.1.89.83.1.2.1 |
An entry in the power supply status table, representing the
status of the associated power supply maintained by the
environmental monitor card. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
RlEnvMonSupplyStatusEntry |
|
|
rlEnvMonSupplyStatusIndex |
1.3.6.1.4.1.89.83.1.2.1.1 |
Unique index for the power supply being instrumented.
This index is for SNMP purposes only, and has no
intrinsic meaning. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..2147483647 |
|
rlEnvMonSupplyStatusDescr |
1.3.6.1.4.1.89.83.1.2.1.2 |
Textual description of the power supply being instrumented.
This description is a short textual label, suitable as a
human-sensible identification for the rest of the
information in the entry. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..32) |
|
rlEnvMonSupplyState |
1.3.6.1.4.1.89.83.1.2.1.3 |
The mandatory state of the power supply being instrumented. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
RlEnvMonState |
|
|
rlEnvMonSupplySource |
1.3.6.1.4.1.89.83.1.2.1.4 |
The power supply source.
unknown - Power supply source unknown
ac - AC power supply
dc - DC power supply
externalPowerSupply - External power supply
internalRedundant - Internal redundant power supply
|
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
unknown(1), ac(2), dc(3), externalPowerSupply(4), internalRedundant(5) |
|
rlEnvFanDataEntry |
1.3.6.1.4.1.89.83.5.1.1 |
An entry of this table specifies a unit |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
RlEnvFanDataEntry |
|
|
rlEnvFanDataStackUnit |
1.3.6.1.4.1.89.83.5.1.1.1 |
The number of the stack unit |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rlEnvFanDataTemp |
1.3.6.1.4.1.89.83.5.1.1.2 |
The unit temperature |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rlEnvFanDataSpeed |
1.3.6.1.4.1.89.83.5.1.1.3 |
Fan speed in RPM |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rlEnvFanDataOperLevel |
1.3.6.1.4.1.89.83.5.1.1.4 |
Fan speed operative level |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rlEnvFanDataAdminLevel |
1.3.6.1.4.1.89.83.5.1.1.5 |
Configured fan speed level |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|