DXS3326GSR-SWL3MGMT-MIB
File:
DXS3326GSR-SWL3MGMT-MIB.mib (70232 bytes)
Imported modules
Imported symbols
Defined Types
SwL3IpCtrlEntry |
|
SEQUENCE |
|
|
|
|
swL3IpCtrlIpAddr |
IpAddress |
|
|
swL3IpCtrlIfIndex |
INTEGER |
|
|
swL3IpCtrlInterfaceName |
DisplayString |
|
|
swL3IpCtrlIpSubnetMask |
IpAddress |
|
|
swL3IpCtrlVlanName |
DisplayString |
|
|
swL3IpCtrlMode |
INTEGER |
|
|
swL3IpCtrlSecondary |
TruthValue |
|
|
swL3IpCtrlState |
RowStatus |
|
|
swL3IpCtrlOperState |
INTEGER |
|
SwL3IpFdbInfoEntry |
|
SEQUENCE |
|
|
|
|
swL3IpFdbInfoIpAddr |
IpAddress |
|
|
swL3IpFdbInfoIpSubnetMask |
IpAddress |
|
|
swL3IpFdbInfoPort |
INTEGER |
|
|
swL3IpFdbInfoType |
INTEGER |
|
SwL3IpStaticRouteEntry |
|
SEQUENCE |
|
|
|
|
swL3IpStaticRouteDest |
IpAddress |
|
|
swL3IpStaticRouteMask |
IpAddress |
|
|
swL3IpStaticRouteBkupState |
INTEGER |
|
|
swL3IpStaticRouteNextHop |
IpAddress |
|
|
swL3IpStaticRouteMetric |
INTEGER |
|
|
swL3IpStaticRouteStatus |
INTEGER |
|
SwL3RelayBootpCtrlEntry |
|
SEQUENCE |
|
|
|
|
swL3RelayBootpCtrlInterfaceName |
DisplayString |
|
|
swL3RelayBootpCtrlServer |
IpAddress |
|
|
swL3RelayBootpCtrlState |
INTEGER |
|
SwL3RelayDnsCtrlEntry |
|
SEQUENCE |
|
|
|
|
swL3RelayDnsCtrlDomainName |
DisplayString |
|
|
swL3RelayDnsCtrlIpAddr |
IpAddress |
|
|
swL3RelayDnsCtrlState |
INTEGER |
|
SwL3Md5Entry |
|
SEQUENCE |
|
|
|
|
swL3Md5KeyId |
INTEGER |
|
|
swL3Md5Key |
DisplayString |
|
|
swL3Md5RowStatus |
RowStatus |
|
SwL3RouteRedistriEntry |
|
SEQUENCE |
|
|
|
|
swL3RouteRedistriSrcProtocol |
INTEGER |
|
|
swL3RouteRedistriDstProtocol |
INTEGER |
|
|
swL3RouteRedistriType |
INTEGER |
|
|
swL3RouteRedistriMetric |
INTEGER |
|
|
swL3RouteRedistriRowStatus |
RowStatus |
|
SwL3OspfHostEntry |
|
SEQUENCE |
|
|
|
|
swL3OspfHostIpAddress |
IpAddress |
|
|
swL3OspfHostTOS |
TOSType |
|
|
swL3OspfHostMetric |
Metric |
|
|
swL3OspfHostAreaID |
AreaID |
|
|
swL3OspfHostStatus |
RowStatus |
|
SwL3OspfVirtIfEntry |
|
SEQUENCE |
|
|
|
|
swL3ospfVirtIfAreaId |
AreaID |
|
|
swL3ospfVirtIfNeighbor |
RouterID |
|
|
swL3ospfVirtIfTransitDelay |
UpToMaxAge |
|
|
swL3ospfVirtIfRetransInterval |
UpToMaxAge |
|
|
swL3ospfVirtIfHelloInterval |
HelloRange |
|
|
swL3ospfVirtIfRtrDeadInterval |
PositiveInteger |
|
|
swL3ospfVirtIfState |
INTEGER |
|
|
swL3ospfVirtIfEvents |
Counter32 |
|
|
swL3ospfVirtIfAuthType |
INTEGER |
|
|
swL3ospfVirtIfAuthKey |
OCTET STRING |
|
|
swL3ospfVirtIfAuthKeyID |
INTEGER |
|
|
swL3ospfVirtIfStatus |
RowStatus |
|
SwL3OspfIfEntry |
|
SEQUENCE |
|
|
|
|
swL3ospfIfIpAddress |
IpAddress |
|
|
swL3ospfAddressLessIf |
Integer32 |
|
|
swL3ospfIfAreaId |
AreaID |
|
|
swL3ospfIfType |
INTEGER |
|
|
swL3ospfIfAdminStat |
Status |
|
|
swL3ospfIfRtrPriority |
DesignatedRouterPriority |
|
|
swL3ospfIfTransitDelay |
UpToMaxAge |
|
|
swL3ospfIfRetransInterval |
UpToMaxAge |
|
|
swL3ospfIfHelloInterval |
HelloRange |
|
|
swL3ospfIfRtrDeadInterval |
PositiveInteger |
|
|
swL3ospfIfPollInterval |
PositiveInteger |
|
|
swL3ospfIfState |
INTEGER |
|
|
swL3ospfIfDesignatedRouter |
IpAddress |
|
|
swL3ospfIfBackupDesignatedRouter |
IpAddress |
|
|
swL3ospfIfEvents |
Counter32 |
|
|
swL3ospfIfMulticastForwarding |
INTEGER |
|
|
swL3ospfIfDemand |
TruthValue |
|
|
swL3ospfIfAuthType |
INTEGER |
|
|
swL3ospfIfAuthKey |
OCTET STRING |
|
|
swL3ospfIfAuthKeyID |
INTEGER |
|
|
swL3ospfIfStatus |
RowStatus |
|
SwL3pimCbsrEntry |
|
SEQUENCE |
|
|
|
|
swL3pimCbsrInterface |
InterfaceIndex |
|
|
swL3pimCbsrPriority |
Integer32 |
|
SwL3pimRegChksumIncDataEntry |
|
SEQUENCE |
|
|
|
|
swL3SwL3pimRegChksumIncDataRpAddr |
IpAddress |
|
|
swL3SwL3pimRegChksumIncDataState |
RowStatus |
|
SwL3pimInfoEntry |
|
SEQUENCE |
|
|
|
|
swL3pimInterface |
InterfaceIndex |
|
|
swL3pimDRPriority |
Unsigned32 |
|
SwL3pimStaticRPEntry |
|
SEQUENCE |
|
|
|
|
swL3pimStaticRPGroupAddress |
IpAddress |
|
|
swL3pimStaticRPGroupMask |
IpAddress |
|
|
swL3pimStaticRPAddress |
IpAddress |
|
|
swL3pimStaticRPRowStatus |
RowStatus |
|
Defined Values
swL3MgmtMIB |
1.3.6.1.4.1.171.11.59.7.3 |
The Structure of Layer 3 Network Management Information for the
proprietary enterprise. |
MODULE-IDENTITY |
|
|
|
swL3DevMgmt |
1.3.6.1.4.1.171.11.59.7.3.1 |
OBJECT IDENTIFIER |
|
|
|
swL3IpMgmt |
1.3.6.1.4.1.171.11.59.7.3.2 |
OBJECT IDENTIFIER |
|
|
|
swL3DevCtrl |
1.3.6.1.4.1.171.11.59.7.3.1.1 |
OBJECT IDENTIFIER |
|
|
|
swL3DevCtrlRIPState |
1.3.6.1.4.1.171.11.59.7.3.1.1.1 |
This object indicates Routing Information Protocol (RIP)
version 2 function is enabled or disabled. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
other(1), disabled(2), enabled(3) |
|
swL3DevCtrlOSPFState |
1.3.6.1.4.1.171.11.59.7.3.1.1.2 |
This object indicates OSPF protocol is enabled or disabled. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
other(1), disabled(2), enabled(3) |
|
swL3DevCtrlDVMRPState |
1.3.6.1.4.1.171.11.59.7.3.1.1.3 |
This object indicates DVMRP protocol is enabled or disabled. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
other(1), disabled(2), enabled(3) |
|
swL3DevCtrlPIMState |
1.3.6.1.4.1.171.11.59.7.3.1.1.4 |
This object indicates PIM protocol is enabled or disabled. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
other(1), disabled(2), enabled(3) |
|
swL3DevCtrlVRRPState |
1.3.6.1.4.1.171.11.59.7.3.1.1.5 |
This object indicates VRRP protocol is enabled or disabled. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
other(1), disabled(2), enabled(3) |
|
swL3IpCtrlTable |
1.3.6.1.4.1.171.11.59.7.3.2.1.1 |
This table contain IP interface information. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
SwL3IpCtrlEntry |
|
swL3IpCtrlEntry |
1.3.6.1.4.1.171.11.59.7.3.2.1.1.1 |
A list of information about a specific IP interface. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SwL3IpCtrlEntry |
|
|
swL3IpCtrlIpAddr |
1.3.6.1.4.1.171.11.59.7.3.2.1.1.1.1 |
The IP address of the interface. This object only can take the
value of the unicast IP address. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
swL3IpCtrlIfIndex |
1.3.6.1.4.1.171.11.59.7.3.2.1.1.1.2 |
This object uniquely identifies the IP interface number in the
swL3IpCtrlTable. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..65535 |
|
swL3IpCtrlInterfaceName |
1.3.6.1.4.1.171.11.59.7.3.2.1.1.1.3 |
This object indicates the name of the IP interface. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(1..12) |
|
swL3IpCtrlVlanName |
1.3.6.1.4.1.171.11.59.7.3.2.1.1.1.5 |
This object indicates the IP control entry's VLAN name. The
VLAN name in each entry must be unique in the IP Control Table. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..32) |
|
swL3IpCtrlMode |
1.3.6.1.4.1.171.11.59.7.3.2.1.1.1.6 |
This object indicates the IP operation mode.
other(1) - this entry is currently in use but the conditions
under which it will remain so are different from each of the
following values.
manual(2) - the IP address will be set by manual.
bootp(3) - the IP address will be set automatically from BOOTP
server.
dhcp(4) - the IP address will be set automatically from DHCP
server. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
INTEGER |
other(1), manual(2), bootp(3), dhcp(4) |
|
swL3IpCtrlSecondary |
1.3.6.1.4.1.171.11.59.7.3.2.1.1.1.7 |
When this is true(1) the IP address is the secondary IP. When
false(2), the IP address is the primary IP. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
TruthValue |
|
|
swL3IpCtrlState |
1.3.6.1.4.1.171.11.59.7.3.2.1.1.1.8 |
This variable displays the status of the entry. The status used
for creating, modifying, and deleting instances of the objects
in this table. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
RowStatus |
|
|
swL3IpCtrlOperState |
1.3.6.1.4.1.171.11.59.7.3.2.1.1.1.9 |
The current operational state of the IP interface. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
other(1), up(2), down(3) |
|
swL3IpFdbInfoTable |
1.3.6.1.4.1.171.11.59.7.3.2.2.1 |
A table that contains forwarding and/or filtering information.
This information is used by the switch in determining how to
propagate the received IP packets. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
SwL3IpFdbInfoEntry |
|
swL3IpFdbInfoEntry |
1.3.6.1.4.1.171.11.59.7.3.2.2.1.1 |
Information about a specific IP address for which the bridge
has some forwarding and/or filtering information. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SwL3IpFdbInfoEntry |
|
|
swL3IpFdbInfoIpAddr |
1.3.6.1.4.1.171.11.59.7.3.2.2.1.1.1 |
A IP address for which switch has forwarding and/or filtering
information. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
swL3IpFdbInfoIpSubnetMask |
1.3.6.1.4.1.171.11.59.7.3.2.2.1.1.2 |
A IP net mask for this interface.for which switch has
forwarding and/or filtering information. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
swL3IpFdbInfoPort |
1.3.6.1.4.1.171.11.59.7.3.2.2.1.1.3 |
Either the value '0', or the port number of the port on which
packet having a IP address equal to the value of the
corresponding instance of swL3IpFdbInfoIpAddr has been seen. A
value of '0' indicates that the port number has not been learned
but that switch does have some forwarding/filtering information
about this address. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..65535 |
|
swL3IpFdbInfoType |
1.3.6.1.4.1.171.11.59.7.3.2.2.1.1.4 |
The status of this entry. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
other(1), static(2), dynamic(3) |
|
swL3IpArpAgingTime |
1.3.6.1.4.1.171.11.59.7.3.2.4 |
The timeout period in minutes for aging out dynamically learned
arp information. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..65535 |
|
swL3IpStaticRouteEntry |
1.3.6.1.4.1.171.11.59.7.3.2.5.1 |
A particular route to a particular destination, under a particular policy.
Once an entry be built,it shouldn't be modified.That is,it just support create and
delete action. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SwL3IpStaticRouteEntry |
|
|
swL3IpStaticRouteDest |
1.3.6.1.4.1.171.11.59.7.3.2.5.1.1 |
The destination IP address of this route.
This object may not take a Multicast (Class D)
address value.
Any assignment (implicit or otherwise) of an
instance of this object to a value x must be
rejected if the bitwise logical-AND of x with
the value of the corresponding instance of the
swL3IpStaticRouteMask object is not equal to x. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
swL3IpStaticRouteMask |
1.3.6.1.4.1.171.11.59.7.3.2.5.1.2 |
Indicate the mask to be logical-ANDed with the
destination address before being compared to
the value in the swL3IpStaticRouteDest field.
For those systems that do not support arbitrary
subnet masks, an agent constructs the value of
the swL3IpStaticRouteMask by reference to the IP
Address Class.
Any assignment (implicit or otherwise) of an
instance of this object to a value x must be
rejected if the bitwise logical-AND of x with
the value of the corresponding instance of the
swL3IpStaticRouteDest object is not equal to
swL3IpStaticRouteDest. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
swL3IpStaticRouteBkupState |
1.3.6.1.4.1.171.11.59.7.3.2.5.1.3 |
The routing state for this route.The value SHOULD be
primary(1) or backup(2). |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
primary(1), backup(2) |
|
swL3IpStaticRouteNextHop |
1.3.6.1.4.1.171.11.59.7.3.2.5.1.4 |
On remote routes, the address of the next sys-
tem en route; Otherwise, 0.0.0.0. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
swL3IpStaticRouteMetric |
1.3.6.1.4.1.171.11.59.7.3.2.5.1.5 |
The routing metric for this route. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..65535 |
|
swL3IpStaticRouteStatus |
1.3.6.1.4.1.171.11.59.7.3.2.5.1.6 |
This object indicates the status of this entry.
other(1) - this entry is currently in use but the conditions
under which it will remain so are different from each of
the following values.
invalid(2) - writing this value to the object, and then the
corresponding entry will be removed from the table.
valid(3) - this entry is reside in the table. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
INTEGER |
other(1), invalid(2), valid(3) |
|
swL3RelayBootpState |
1.3.6.1.4.1.171.11.59.7.3.3.1.1 |
This object indicates BOOTP Relay function is enabled or
disabled. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
other(1), disabled(2), enabled(3) |
|
swL3RelayBootpHopCount |
1.3.6.1.4.1.171.11.59.7.3.3.1.2 |
This object indicates the maximum number of router hops that
the BOOTP packets can cross. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..65535 |
|
swL3RelayBootpTimeThreshold |
1.3.6.1.4.1.171.11.59.7.3.3.1.3 |
This object indicates the minimum time in seconds within which
the switch must relay the BOOTP request. If this time is
exceeded, the switch will drop the BOOTP packet. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..65535 |
|
swL3RelayBootpCtrlTable |
1.3.6.1.4.1.171.11.59.7.3.3.1.4 |
This table specifys the IP address as a destination to forward
(relay) BOOTP packets to. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
SwL3RelayBootpCtrlEntry |
|
swL3RelayBootpCtrlEntry |
1.3.6.1.4.1.171.11.59.7.3.3.1.4.1 |
A list of information specifies the IP address as a destination
to forward (relay) BOOTP packets to. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SwL3RelayBootpCtrlEntry |
|
|
swL3RelayBootpCtrlState |
1.3.6.1.4.1.171.11.59.7.3.3.1.4.1.3 |
This object indicates the status of this entry.
other(1) - this entry is currently in use but the conditions
under which it will remain so are different from each of
the following values.
invalid(2) - writing this value to the object, and then the
corresponding entry will be removed from the table.
valid(3) - this entry is reside in the table. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
other(1), invalid(2), valid(3) |
|
swL3RelayDnsState |
1.3.6.1.4.1.171.11.59.7.3.3.2.1 |
This object indicates DNS Relay function is enabled or
disabled. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
other(1), disabled(2), enabled(3) |
|
swL3RelayDnsPrimaryServer |
1.3.6.1.4.1.171.11.59.7.3.3.2.2 |
This object indicates the address of the primary DNS server. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
swL3RelayDnsCacheState |
1.3.6.1.4.1.171.11.59.7.3.3.2.4 |
This object indicates DNS Relay cache is enabled or
disabled. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
other(1), disabled(2), enabled(3) |
|
swL3RelayDnsStaticTableState |
1.3.6.1.4.1.171.11.59.7.3.3.2.5 |
This object indicates DNS Relay static table is enabled or
disabled. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
other(1), disabled(2), enabled(3) |
|
swL3RelayDnsCtrlEntry |
1.3.6.1.4.1.171.11.59.7.3.3.2.6.1 |
A list of information display the current DNS relay static
table. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SwL3RelayDnsCtrlEntry |
|
|
swL3RelayDnsCtrlDomainName |
1.3.6.1.4.1.171.11.59.7.3.3.2.6.1.1 |
The domain name of the entry. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(1..32) |
|
swL3RelayDnsCtrlState |
1.3.6.1.4.1.171.11.59.7.3.3.2.6.1.3 |
This object indicates the status of this entry.
other(1) - this entry is currently in use but the conditions
under which it will remain so are different from each of
the following values.
invalid(2) - writing this value to the object, and then the
corresponding entry will be removed from the table.
valid(3) - this entry is reside in the table. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
other(1), invalid(2), valid(3) |
|
swL3Md5Table |
1.3.6.1.4.1.171.11.59.7.3.4 |
This table display the current MD5 key table. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
SwL3Md5Entry |
|
swL3Md5Entry |
1.3.6.1.4.1.171.11.59.7.3.4.1 |
A list of information display the current MD5 key table. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SwL3Md5Entry |
|
|
swL3Md5KeyId |
1.3.6.1.4.1.171.11.59.7.3.4.1.1 |
The MD5 key ID. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..255 |
|
swL3Md5Key |
1.3.6.1.4.1.171.11.59.7.3.4.1.2 |
An MD5 password of up to 16 bytes. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(1..16) |
|
swL3Md5RowStatus |
1.3.6.1.4.1.171.11.59.7.3.4.1.3 |
This object indicates the status of this entry. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
RowStatus |
|
|
swL3RouteRedistriTable |
1.3.6.1.4.1.171.11.59.7.3.5 |
Route redistribution allows routers on the network. That are
running different routing protocols to exchange routing
information. This is accomplished by comparing the routes stored
in the vairous router's routing tables and assinging appropriate
metrics. This information is then exchanged among the various
routers according to the individual routers current routing
protocol. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
SwL3RouteRedistriEntry |
|
swL3RouteRedistriEntry |
1.3.6.1.4.1.171.11.59.7.3.5.1 |
A list of information display the route redistribution table. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SwL3RouteRedistriEntry |
|
|
swL3RouteRedistriSrcProtocol |
1.3.6.1.4.1.171.11.59.7.3.5.1.1 |
Allows the selection of the protocol of the source device. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
other(1), rip(2), ospf(3), static(4), local(5) |
|
swL3RouteRedistriDstProtocol |
1.3.6.1.4.1.171.11.59.7.3.5.1.2 |
Allows the selection of the protocol of the destination device. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
other(1), rip(2), ospf(3) |
|
swL3RouteRedistriType |
1.3.6.1.4.1.171.11.59.7.3.5.1.3 |
Allows the selection of one of the methods for calcalculating
the metric value. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
INTEGER |
other(1), all(2), type-1(3), type-2(4), internal(5), external(6), inter-E1(7), inter-E2(8), extType1(9), extType2(10) |
|
swL3RouteRedistriMetric |
1.3.6.1.4.1.171.11.59.7.3.5.1.4 |
Allows the entry of an OSPF interface cost. This is analogous
to a Hop Count in the RIP routing protocol. The value '0'
indicates default value. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..16777214 |
|
swL3OspfHostTable |
1.3.6.1.4.1.171.11.59.7.3.6 |
The list of Hosts, and their metrics, that the router will
advertise as host routes. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
SwL3OspfHostEntry |
|
swL3OspfHostEntry |
1.3.6.1.4.1.171.11.59.7.3.6.1 |
A metric to be advertised, for a given type of service, when a
given host is reachable. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SwL3OspfHostEntry |
|
|
swL3OspfHostTOS |
1.3.6.1.4.1.171.11.59.7.3.6.1.2 |
The Type of Service of the route being configured. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
TOSType |
|
|
swL3OspfHostMetric |
1.3.6.1.4.1.171.11.59.7.3.6.1.3 |
The Metric to be advertised. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
Metric |
|
|
swL3OspfHostAreaID |
1.3.6.1.4.1.171.11.59.7.3.6.1.4 |
The Area the Host Entry is to be found within. By default, the
area that a subsuming OSPF interface is in, or 0.0.0.0 |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
AreaID |
|
|
swL3OspfHostStatus |
1.3.6.1.4.1.171.11.59.7.3.6.1.5 |
This variable displays the status of the entry. Setting it to
'invalid' has the effect of rendering it inoperative. The internal
effect (row removal) is implementation dependent. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
RowStatus |
|
|
swL3ospfVirtIfEntry |
1.3.6.1.4.1.171.11.59.7.3.7.1 |
Information about a single Virtual Interface. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SwL3OspfVirtIfEntry |
|
|
swL3ospfVirtIfAreaId |
1.3.6.1.4.1.171.11.59.7.3.7.1.1 |
The Transit Area that the Virtual Link
traverses. By definition, this is not 0.0.0.0 |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
AreaID |
|
|
swL3ospfVirtIfTransitDelay |
1.3.6.1.4.1.171.11.59.7.3.7.1.3 |
The estimated number of seconds it takes to
transmit a link- state update packet over this
interface. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
UpToMaxAge |
|
|
swL3ospfVirtIfRetransInterval |
1.3.6.1.4.1.171.11.59.7.3.7.1.4 |
The number of seconds between link-state ad-
vertisement retransmissions, for adjacencies
belonging to this interface. This value is
also used when retransmitting database descrip-
tion and link-state request packets. This
value should be well over the expected round-
trip time. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
UpToMaxAge |
|
|
swL3ospfVirtIfHelloInterval |
1.3.6.1.4.1.171.11.59.7.3.7.1.5 |
The length of time, in seconds, between the
Hello packets that the router sends on the in-
terface. This value must be the same for the
virtual neighbor. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
HelloRange |
|
|
swL3ospfVirtIfRtrDeadInterval |
1.3.6.1.4.1.171.11.59.7.3.7.1.6 |
The number of seconds that a router's Hello
packets have not been seen before it's neigh-
bors declare the router down. This should be
some multiple of the Hello interval. This
value must be the same for the virtual neigh-
bor. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
PositiveInteger |
|
|
swL3ospfVirtIfState |
1.3.6.1.4.1.171.11.59.7.3.7.1.7 |
OSPF virtual interface states. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
down(1), pointToPoint(4) |
|
swL3ospfVirtIfEvents |
1.3.6.1.4.1.171.11.59.7.3.7.1.8 |
The number of state changes or error events on
this Virtual Link |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
swL3ospfVirtIfAuthType |
1.3.6.1.4.1.171.11.59.7.3.7.1.9 |
The authentication type specified for a virtu-
al interface. Additional authentication types
may be assigned locally. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..255 |
|
swL3ospfVirtIfAuthKey |
1.3.6.1.4.1.171.11.59.7.3.7.1.10 |
If Authentication Type is simplePassword, the
device will left adjust and zero fill to 8 oc-
tets.
Note that unauthenticated interfaces need no
authentication key, and simple password authen-
tication cannot use a key of more than 8 oc-
tets. Larger keys are useful only with authen-
tication mechanisms not specified in this docu-
ment. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..256) |
|
swL3ospfVirtIfAuthKeyID |
1.3.6.1.4.1.171.11.59.7.3.7.1.11 |
The MD5 key ID. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..255 |
|
swL3ospfVirtIfStatus |
1.3.6.1.4.1.171.11.59.7.3.7.1.12 |
This variable displays the status of the en-
try. Setting it to 'invalid' has the effect of
rendering it inoperative. The internal effect
(row removal) is implementation dependent. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
RowStatus |
|
|
swL3ospfIfTable |
1.3.6.1.4.1.171.11.59.7.3.8 |
The OSPF Interface Table describes the inter-
faces from the viewpoint of OSPF. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
SwL3OspfIfEntry |
|
swL3ospfIfEntry |
1.3.6.1.4.1.171.11.59.7.3.8.1 |
The OSPF Interface Entry describes one inter-
face from the viewpoint of OSPF. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SwL3OspfIfEntry |
|
|
swL3ospfIfIpAddress |
1.3.6.1.4.1.171.11.59.7.3.8.1.1 |
The IP address of this OSPF interface. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
swL3ospfAddressLessIf |
1.3.6.1.4.1.171.11.59.7.3.8.1.2 |
For the purpose of easing the instancing of
addressed and addressless interfaces; This
variable takes the value 0 on interfaces with
IP Addresses, and the corresponding value of
ifIndex for interfaces having no IP Address. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
swL3ospfIfAreaId |
1.3.6.1.4.1.171.11.59.7.3.8.1.3 |
A 32-bit integer uniquely identifying the area
to which the interface connects. Area ID
0.0.0.0 is used for the OSPF backbone. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
AreaID |
|
|
swL3ospfIfType |
1.3.6.1.4.1.171.11.59.7.3.8.1.4 |
The OSPF interface type.
By way of a default, this field may be intuited
from the corresponding value of ifType. Broad-
cast LANs, such as Ethernet and IEEE 802.5,
take the value 'broadcast', X.25 and similar
technologies take the value 'nbma', and links
that are definitively point to point take the
value 'pointToPoint'. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
INTEGER |
broadcast(1), nbma(2), pointToPoint(3), pointToMultipoint(5) |
|
swL3ospfIfAdminStat |
1.3.6.1.4.1.171.11.59.7.3.8.1.5 |
The OSPF interface's administrative status.
The value formed on the interface, and the in-
terface will be advertised as an internal route
to some area. The value 'disabled' denotes
that the interface is external to OSPF. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
Status |
|
|
swL3ospfIfRtrPriority |
1.3.6.1.4.1.171.11.59.7.3.8.1.6 |
The priority of this interface. Used in
multi-access networks, this field is used in
the designated router election algorithm. The
value 0 signifies that the router is not eligi-
ble to become the designated router on this
particular network. In the event of a tie in
this value, routers will use their Router ID as
a tie breaker. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
DesignatedRouterPriority |
|
|
swL3ospfIfTransitDelay |
1.3.6.1.4.1.171.11.59.7.3.8.1.7 |
The estimated number of seconds it takes to
transmit a link state update packet over this
interface. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
UpToMaxAge |
|
|
swL3ospfIfRetransInterval |
1.3.6.1.4.1.171.11.59.7.3.8.1.8 |
The number of seconds between link-state ad-
vertisement retransmissions, for adjacencies
belonging to this interface. This value is
also used when retransmitting database descrip-
tion and link-state request packets. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
UpToMaxAge |
|
|
swL3ospfIfHelloInterval |
1.3.6.1.4.1.171.11.59.7.3.8.1.9 |
The length of time, in seconds, between the
Hello packets that the router sends on the in-
terface. This value must be the same for all
routers attached to a common network. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
HelloRange |
|
|
swL3ospfIfRtrDeadInterval |
1.3.6.1.4.1.171.11.59.7.3.8.1.10 |
The number of seconds that a router's Hello
packets have not been seen before it's neigh-
bors declare the router down. This should be
some multiple of the Hello interval. This
value must be the same for all routers attached
to a common network. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
PositiveInteger |
|
|
swL3ospfIfPollInterval |
1.3.6.1.4.1.171.11.59.7.3.8.1.11 |
The larger time interval, in seconds, between
the Hello packets sent to an inactive non-
broadcast multi- access neighbor. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
PositiveInteger |
|
|
swL3ospfIfState |
1.3.6.1.4.1.171.11.59.7.3.8.1.12 |
The OSPF Interface State. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
down(1), loopback(2), waiting(3), pointToPoint(4), designatedRouter(5), backupDesignatedRouter(6), otherDesignatedRouter(7) |
|
swL3ospfIfEvents |
1.3.6.1.4.1.171.11.59.7.3.8.1.15 |
The number of times this OSPF interface has
changed its state, or an error has occurred. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
swL3ospfIfMulticastForwarding |
1.3.6.1.4.1.171.11.59.7.3.8.1.16 |
The way multicasts should forwarded on this
interface; not forwarded, forwarded as data
link multicasts, or forwarded as data link uni-
casts. Data link multicasting is not meaning-
ful on point to point and NBMA interfaces, and
setting ospfMulticastForwarding to 0 effective-
ly disables all multicast forwarding. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
INTEGER |
blocked(1), multicast(2), unicast(3) |
|
swL3ospfIfDemand |
1.3.6.1.4.1.171.11.59.7.3.8.1.17 |
Indicates whether Demand OSPF procedures (hel-
lo supression to FULL neighbors and setting the
DoNotAge flag on proogated LSAs) should be per-
formed on this interface. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
TruthValue |
|
|
swL3ospfIfAuthType |
1.3.6.1.4.1.171.11.59.7.3.8.1.18 |
The authentication type specified for an in-
terface. Additional authentication types may
be assigned locally. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..255 |
|
swL3ospfIfAuthKey |
1.3.6.1.4.1.171.11.59.7.3.8.1.19 |
The Authentication Key. If the Area's Author-
ization Type is simplePassword, and the key
length is shorter than 8 octets, the agent will
left adjust and zero fill to 8 octets.
Note that unauthenticated interfaces need no
authentication key, and simple password authen-
tication cannot use a key of more than 8 oc-
tets. Larger keys are useful only with authen-
tication mechanisms not specified in this docu-
ment.
When read, ospfIfAuthKey always returns an Oc-
tet String of length zero. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..256) |
|
swL3ospfIfAuthKeyID |
1.3.6.1.4.1.171.11.59.7.3.8.1.20 |
The MD5 key ID. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..255 |
|
swL3ospfIfStatus |
1.3.6.1.4.1.171.11.59.7.3.8.1.21 |
This variable displays the status of the en-
try. Setting it to 'invalid' has the effect of
rendering it inoperative. The internal effect
(row removal) is implementation dependent. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
RowStatus |
|
|
swL3RoutePreferenceRIP |
1.3.6.1.4.1.171.11.59.7.3.9.1 |
Used to configure the route preference of RIP. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..999 |
|
swL3RoutePreferenceOSPFIntra |
1.3.6.1.4.1.171.11.59.7.3.9.2 |
Used to configure the route preference of OSPF Intra. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..999 |
|
swL3RoutePreferenceStatic |
1.3.6.1.4.1.171.11.59.7.3.9.3 |
Used to configure the route preference of Static. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..999 |
|
swL3RoutePreferenceLocal |
1.3.6.1.4.1.171.11.59.7.3.9.4 |
Used to read the route preference of Local. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..999 |
|
swL3RoutePreferenceOSPFInter |
1.3.6.1.4.1.171.11.59.7.3.9.5 |
Used to configure the route preference of OSPF Inter. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..999 |
|
swL3RoutePreferenceOSPFExtT1 |
1.3.6.1.4.1.171.11.59.7.3.9.6 |
Used to configure the route preference of OSPFExtT1. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..999 |
|
swL3RoutePreferenceOSPFExtT2 |
1.3.6.1.4.1.171.11.59.7.3.9.7 |
Used to configure the route preference of OSPF ExtT2. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..999 |
|
swL3PimMgmt |
1.3.6.1.4.1.171.11.59.7.3.11 |
OBJECT IDENTIFIER |
|
|
|
swL3pimCbsrBootStrapPeriod |
1.3.6.1.4.1.171.11.59.7.3.11.1.1 |
At the elected BSR, this is the interval between originating Bootstrap
messages, and should be equal to 60 seconds. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
1..255 |
|
swL3pimCbsrHashMaskLen |
1.3.6.1.4.1.171.11.59.7.3.11.1.2 |
The length (in bits) of the mask to use in the hash function.
For IPv4 we recommend a value of 30. For IPv6 we recommand a value of 126. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
swL3pimCbsrTable |
1.3.6.1.4.1.171.11.59.7.3.11.1.3 |
The PIM CBSR Table contains the cbsr related information, like
interface and priority. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
SwL3pimCbsrEntry |
|
swL3pimCbsrEntry |
1.3.6.1.4.1.171.11.59.7.3.11.1.3.1 |
An entry in the PIM CBSR Table. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SwL3pimCbsrEntry |
|
|
swL3pimCbsrPriority |
1.3.6.1.4.1.171.11.59.7.3.11.1.3.1.2 |
The preference value for the local interface as a candidate
bootstrap router. The value of -1 is used to indicate that
the local interface is not a candidate BSR interface. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
-1..255 |
|
swL3pimCandidateRPHoldtime |
1.3.6.1.4.1.171.11.59.7.3.11.2.1 |
For C-RPs, this is the Holdtime specified in C-RP-Adv message, and
is used by the BSR to time out RPs. This should be set to 2.5 *
[C-RP-Adv-Period]. Default: 150 seconds. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
swL3pimCandidateRPPriority |
1.3.6.1.4.1.171.11.59.7.3.11.2.2 |
The 'priority' of the included RP, for the corresponding Encoded-Group
Address (if any), highest priority is '0' (i.e. the lower the value of the
'Priority' field, the higher the priority). This field is stored at the BSR
upon receipt along with the RP address and corresponding Encoded-Group Address. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
swL3pimCandidateRPWildcardPrefixCnt |
1.3.6.1.4.1.171.11.59.7.3.11.2.3 |
The number of enocded group addresses included in the message; indicating
the group prefixes for which the C-RP is advertising. A Prefix-Cnt of '0'
implies a prefix of 224.0.0.0 with mask length of 4; i.e. all multicast
groups. If the C-RP is not configured with Group-prefix information, the
C-RP puts a default value of '0' in this field. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..1 |
|
swL3pimRegChksumIncDataTable |
1.3.6.1.4.1.171.11.59.7.3.11.4 |
The PIM Register Checksum Including Data Table contains the PIM
register checksum including data information, like RP address and
state. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
SwL3pimRegChksumIncDataEntry |
|
swL3pimRegChksumIncDataEntry |
1.3.6.1.4.1.171.11.59.7.3.11.4.1 |
An entry in the PIM Register Checksum Including Data Table. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SwL3pimRegChksumIncDataEntry |
|
|
swL3pimRegisterProbeTime |
1.3.6.1.4.1.171.11.59.7.3.11.5.1 |
When null Registers are used, this is the time between sending a null
Register and the Register-Suppression-Timer expiring unless it is restarted
by receiving a Register-Stop. Thus, a null Register would be sent when the
Register-Suppression-Timer reaches this value. Default: 5 seconds. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
1..127 |
|
swL3pimRegisterSuppressionTime |
1.3.6.1.4.1.171.11.59.7.3.11.5.2 |
This is the mean interval between receiving a Register-Stop and allowing
Registers to be sent again. A lower value means more frequent register bursts
at RP, while a higher value means longer join latency for new receiver.
Default: 60 seconds. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
3..255 |
|
swL3pimInfoTable |
1.3.6.1.4.1.171.11.59.7.3.11.5.3 |
The PIM Information Table contains the PIM related information, like
DR priority. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
SwL3pimInfoEntry |
|
swL3pimInfoEntry |
1.3.6.1.4.1.171.11.59.7.3.11.5.3.1 |
An entry in the PIM Information Table. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SwL3pimInfoEntry |
|
|
swL3pimInterface |
1.3.6.1.4.1.171.11.59.7.3.11.5.3.1.1 |
The ifIndex value of this PIM interface. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
InterfaceIndex |
|
|
swL3pimDRPriority |
1.3.6.1.4.1.171.11.59.7.3.11.5.3.1.2 |
The DR Priority is a 32-bit unsigned number and the numerically larger
priority is always prefered. A router's idea of the current DR on an interface
can change when a PIM Hello message is received, when a neighbor timers out,
or when a router's own DR priority changes. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
0..4294967294 |
|
swL3pimStaticRPTable |
1.3.6.1.4.1.171.11.59.7.3.11.6 |
The PIM Static RP Table contains the PIM static RP related information,
like group address, group mask, RP address and RP row status. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
SwL3pimStaticRPEntry |
|
swL3pimStaticRPEntry |
1.3.6.1.4.1.171.11.59.7.3.11.6.1 |
An entry in the PIM Static RP Table. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SwL3pimStaticRPEntry |
|
|
swL3pimStaticRPGroupAddress |
1.3.6.1.4.1.171.11.59.7.3.11.6.1.1 |
The IP multicast group address which, when combined with
swL3pimStaticRPGroupMask, identifies a group prefix for which
the local router will advertise itself as a static RP. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
swL3pimStaticRPGroupMask |
1.3.6.1.4.1.171.11.59.7.3.11.6.1.2 |
The multicast group address mask which, when combined with
swL3pimStaticRPGroupAddress, identifies a group prefix for which
the local router will advertise itself as a static RP. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
swL3pimStaticRPAddress |
1.3.6.1.4.1.171.11.59.7.3.11.6.1.3 |
The (unicast) address of the interface which will be
advertised as a static RP. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
swL3pimStaticRPRowStatus |
1.3.6.1.4.1.171.11.59.7.3.11.6.1.4 |
The status of this row, by which new entries may be
created, or old entries deleted from this table. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
RowStatus |
|
|