DLINK-3100-IP
File:
DLINK-3100-IP.mib (29397 bytes)
Imported modules
Imported symbols
Defined Types
RsIpAddrEntry |
|
SEQUENCE |
|
|
|
|
rsIpAdEntAddr |
IpAddress |
|
|
rsIpAdEntIfIndex |
INTEGER |
|
|
rsIpAdEntNetMask |
IpAddress |
|
|
rsIpAdEntForwardIpBroadcast |
INTEGER |
|
|
rsIpAdEntBackupAddr |
IpAddress |
|
|
rsIpAdEntStatus |
INTEGER |
|
|
rsIpAdEntBcastAddr |
INTEGER |
|
|
rsIpAdEntArpServer |
INTEGER |
|
|
rsIpAdEntName |
DisplayString |
|
|
rsIpAdEntOwner |
INTEGER |
|
|
rsIpAdEntAdminStatus |
INTEGER |
|
|
rsIpAdEntOperStatus |
INTEGER |
|
|
rsIpAdEntPrecedence |
INTEGER |
|
RsIcmpRdEntry |
|
SEQUENCE |
|
|
|
|
rsIcmpRdIpAddr |
IpAddress |
|
|
rsIcmpRdIpAdvertAddr |
IpAddress |
|
|
rsIcmpRdMaxAdvertInterval |
INTEGER |
|
|
rsIcmpRdMinAdvertInterval |
INTEGER |
|
|
rsIcmpRdAdvertLifetime |
INTEGER |
|
|
rsIcmpRdAdvertise |
INTEGER |
|
|
rsIcmpRdPreferenceLevel |
INTEGER |
|
|
rsIcmpRdEntStatus |
INTEGER |
|
RlTranslationNameToIpEntry |
|
SEQUENCE |
|
|
|
|
rlTranslationNameToIpName |
DisplayString |
|
|
rlTranslationNameToIpIpAddr |
IpAddress |
|
RlIpCidrRouteExtEntry |
|
SEQUENCE |
|
|
|
|
rlIpCidrRouteProto |
INTEGER |
|
RlIpStaticRouteEntry |
|
SEQUENCE |
|
|
|
|
rlIpStaticRouteDest |
IpAddress |
|
|
rlIpStaticRouteMask |
IpAddress |
|
|
rlIpStaticRouteTos |
INTEGER |
|
|
rlIpStaticRouteNextHop |
IpAddress |
|
|
rlIpStaticRouteMetric |
INTEGER |
|
|
rlIpStaticRouteType |
INTEGER |
|
|
rlIpStaticRouteNextHopAS |
INTEGER |
|
|
rlIpStaticRouteForwardingStatus |
INTEGER |
|
|
rlIpStaticRouteRowStatus |
RowStatus |
|
|
rlIpStaticRouteOwner |
INTEGER |
|
Defined Values
ipSpec |
1.3.6.1.4.1.171.10.94.89.89.26 |
The private MIB module definition for IP MIB. |
MODULE-IDENTITY |
|
|
|
rsIpAddrTable |
1.3.6.1.4.1.171.10.94.89.89.26.1 |
This table is parralel to MIB II IpAddrTable, and is used to
add/delete entries to/from that table. In addition it contains
private objects. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
RsIpAddrEntry |
|
rsIpAddrEntry |
1.3.6.1.4.1.171.10.94.89.89.26.1.1 |
The addressing information for one of this
entity's IP addresses. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
RsIpAddrEntry |
|
|
rsIpAdEntAddr |
1.3.6.1.4.1.171.10.94.89.89.26.1.1.1 |
The IP address to which this entry's addressing
information pertains. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
rsIpAdEntIfIndex |
1.3.6.1.4.1.171.10.94.89.89.26.1.1.2 |
The index value which uniquely identifies the
interface to which this entry is applicable. The
interface identified by a particular value of this
index is the same interface as identified by the
same value of ifIndex. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rsIpAdEntNetMask |
1.3.6.1.4.1.171.10.94.89.89.26.1.1.3 |
The subnet mask associated with the IP address of
this entry. The value of the mask is an IP
address with all the network bits set to 1 and all
the hosts bits set to 0. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
rsIpAdEntForwardIpBroadcast |
1.3.6.1.4.1.171.10.94.89.89.26.1.1.4 |
This variable controls forwarding of IP (sub)net-directed
broadcasts destined for an attached sub(net). |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enable(1), disable(2) |
|
rsIpAdEntBackupAddr |
1.3.6.1.4.1.171.10.94.89.89.26.1.1.5 |
In case there are two IP routers in the domain,
the address of the second IP router. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
rsIpAdEntStatus |
1.3.6.1.4.1.171.10.94.89.89.26.1.1.6 |
The validity of this entry. Invalid indicates that this entry is
invalid in IpAddrTable (MIB II). |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
valid(1), invalid(2) |
|
rsIpAdEntBcastAddr |
1.3.6.1.4.1.171.10.94.89.89.26.1.1.7 |
Indicates how the host part of ip subnet broadcast messages will be
filled:
0 - host part will be filled by 0
1 - host part will be filled by 1. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..1 |
|
rsIpAdEntArpServer |
1.3.6.1.4.1.171.10.94.89.89.26.1.1.8 |
Indicates whether the router will reply to incoming ARP requests on
this interface, providing the physical address corresponding to this
IP interface. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enable(1), disable(2) |
|
rsIpAdEntName |
1.3.6.1.4.1.171.10.94.89.89.26.1.1.9 |
The IP Interface name |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..30) |
|
rsIpAdEntOwner |
1.3.6.1.4.1.171.10.94.89.89.26.1.1.10 |
The IP Interface owner. Static if interface defined by user, dhcp
if received by boot protocol like DHCP and internal
for internal usage. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
static(1), dhcp(2), internal(3), default(4) |
|
rsIpAdEntAdminStatus |
1.3.6.1.4.1.171.10.94.89.89.26.1.1.11 |
The IP Interface admin status. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
up(1), down(2) |
|
rsIpAdEntOperStatus |
1.3.6.1.4.1.171.10.94.89.89.26.1.1.12 |
If active the interface can be used to send and receive frames. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
active(1), inactive(2) |
|
rsIpAdEntPrecedence |
1.3.6.1.4.1.171.10.94.89.89.26.1.1.13 |
The IP preference, to be selected as source IP for rsIpAdEntIfIndex.
this source IP selection is first by preference value.
if more than one IP has the same preference the one with the
lowest IP is selected.
(higher value -> higher preference) |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..255 |
|
icmpSpec |
1.3.6.1.4.1.171.10.94.89.89.26.2 |
OBJECT IDENTIFIER |
|
|
|
rsIcmpGenErrMsgEnable |
1.3.6.1.4.1.171.10.94.89.89.26.2.1 |
This variable controlls the ability to generate ICMP error messages |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enable(1), disable(2) |
|
rsIcmpRdTable |
1.3.6.1.4.1.171.10.94.89.89.26.2.2 |
This table contains ICMP Router Discovery parameters
configurated per IP interface. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
RsIcmpRdEntry |
|
rsIcmpRdEntry |
1.3.6.1.4.1.171.10.94.89.89.26.2.2.1 |
The ICMP parameters configurated for IP interface. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
RsIcmpRdEntry |
|
|
rsIcmpRdIpAddr |
1.3.6.1.4.1.171.10.94.89.89.26.2.2.1.1 |
The IP address to which this entry's information pertains. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
rsIcmpRdIpAdvertAddr |
1.3.6.1.4.1.171.10.94.89.89.26.2.2.1.2 |
The IP destination address to be used for multicast
Router Advertisements sent from the interface. The
only permissible values are the all-systems multicast
address, 224.0.0.1, or the limited-broadcast address,
255.255.255.255. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
rsIcmpRdMaxAdvertInterval |
1.3.6.1.4.1.171.10.94.89.89.26.2.2.1.3 |
The maximum time allowed between sending multicast
Router Advertisements from the interface, in seconds.
Must be no less than 4 seconds and no greater than 1800
seconds. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
4..1800 |
|
rsIcmpRdMinAdvertInterval |
1.3.6.1.4.1.171.10.94.89.89.26.2.2.1.4 |
The minimum time allowed between sending unsolicited
multicast Router Advertisements from the interface, in
seconds. Must be no less than 3 seconds and no greater
than rsIcmpRdMaxAdvertInterval.
Default: 0.75 * rsIcmpRdMaxAdvertInterval. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
3..1800 |
|
rsIcmpRdAdvertLifetime |
1.3.6.1.4.1.171.10.94.89.89.26.2.2.1.5 |
The maximum length of time that the advertised addresses
are to be considered as valid. Must be no less than
rsIcmpRdMaxAdvertInterval and no greater than 9000 seconds.
Default: 3 * rsIcmpRdMaxAdvertInterval. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
4..9000 |
|
rsIcmpRdAdvertise |
1.3.6.1.4.1.171.10.94.89.89.26.2.2.1.6 |
A flag indicating whether or not the address is to be
advertised. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enable(1), disable(2) |
|
rsIcmpRdPreferenceLevel |
1.3.6.1.4.1.171.10.94.89.89.26.2.2.1.7 |
The preferability of the address as a default router
address, relative to other router addresses on the same
subnet. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rsIcmpRdEntStatus |
1.3.6.1.4.1.171.10.94.89.89.26.2.2.1.8 |
Setting of any value to this object set values of
all fields to the default values. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rip2Spec |
1.3.6.1.4.1.171.10.94.89.89.26.3 |
OBJECT IDENTIFIER |
|
|
|
arpSpec |
1.3.6.1.4.1.171.10.94.89.89.26.4 |
OBJECT IDENTIFIER |
|
|
|
rsArpDeleteTable |
1.3.6.1.4.1.171.10.94.89.89.26.4.1 |
Setting to value deleteArpTab(1): deletes the arp table -
static and dynamic entries
deleteIpArpDynamicEntries(2): delete all dynamic entries
deleteIpArpStaticEntries(3): delete all static entries
deleteIpArpDelDynamicRefreshStatic(4) - delete all dynamic -
refresh static, thus
refrashing FFT.
on get returns the last action |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
noAction(0), deleteArpTab(1), deleteIpArpDynamicEntries(2), deleteIpArpStaticEntries(3), deleteIpArpDelDynamicRefreshStatic(4) |
|
rsArpInactiveTimeOut |
1.3.6.1.4.1.171.10.94.89.89.26.4.2 |
This variable defines the maximum time period (in second) that can
pass between ARP requests concerning an entry in the ARP table.
After this time period, the entry is deleted from the table. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
1..40000000 |
|
rsArpProxy |
1.3.6.1.4.1.171.10.94.89.89.26.4.3 |
When ARP Proxy is enabled, the router can respond to
ARP requests for nodes located on a different sub-net,
provided they are it its network table. The router responds
with its own MAC address.
When ARP Proxy is disabled, the router responds only
to ARP requests for its own IP addresses. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enable(1), disable(2) |
|
rsArpRequestsSent |
1.3.6.1.4.1.171.10.94.89.89.26.4.4 |
Displays how many ARP requests have been sent out to an ARP server
for address resolution. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
rsArpRepliesSent |
1.3.6.1.4.1.171.10.94.89.89.26.4.5 |
Displays how many ARP replies have been sent out to an ARP client
in response to request packets. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
rsArpProxyRepliesSent |
1.3.6.1.4.1.171.10.94.89.89.26.4.6 |
Displays how many proxy ARP replies have been sent out in response
to request packets. A proxy router serving as a gateway to a subnet
would respond with a proxy reply. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
rsArpUnresolveTimer |
1.3.6.1.4.1.171.10.94.89.89.26.4.7 |
Specifies the frequency in seconds in which to send out ARP
requests to resolve the Next Hop MAC address. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rsArpMibVersion |
1.3.6.1.4.1.171.10.94.89.89.26.4.8 |
MIB's version, the current version is 2.
Version 1:
rsArpDeleteTable
Setting this object to any not-null value has the effect
of deleting all entries of the ARP table.
Version 2:
rsArpDeleteTable
Setting to value deleteArpTab(1): deletes the arp table -
static and dynamic entries
deleteIpArpDynamicEntries(2): delete all dynamic entries
deleteIpArpStaticEntries(3): delete all static entries
deleteIpArpDelDynamicRefreshStatic(4):
delete all dynamic -
refresh static, thus
refrashing FFT.
on get returns the last action.
New MIB variables support:
rsArpRequestsSent
rsArpRepliesSent
rsArpProxyRepliesSent
rsArpUnresolveTimer
rsArpMibVersion |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
tftp |
1.3.6.1.4.1.171.10.94.89.89.26.5 |
OBJECT IDENTIFIER |
|
|
|
rsTftpRetryTimeOut |
1.3.6.1.4.1.171.10.94.89.89.26.5.1 |
General Retransmission time-out value (seconds) |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rsTftpTotalTimeOut |
1.3.6.1.4.1.171.10.94.89.89.26.5.2 |
Total Retransmission time-out value (seconds) |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rsGetConfigFile |
1.3.6.1.4.1.171.10.94.89.89.26.5.4 |
The file name include path where the Router Server will get the full
configuration from. The default destination address will be the sender
address. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
rsLoadSoftware |
1.3.6.1.4.1.171.10.94.89.89.26.5.5 |
The file name include path where the Router Server will get the
software. The default source address will be the sender address. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
rsFileServerAddress |
1.3.6.1.4.1.171.10.94.89.89.26.5.6 |
The IP address of the configuration / sw server. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
ipRedundancy |
1.3.6.1.4.1.171.10.94.89.89.26.6 |
OBJECT IDENTIFIER |
|
|
|
ipRipFilter |
1.3.6.1.4.1.171.10.94.89.89.26.8 |
OBJECT IDENTIFIER |
|
|
|
rsRipEnable |
1.3.6.1.4.1.171.10.94.89.89.26.9 |
Enables or disables RIP. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enable(1), disable(2) |
|
rsTelnetPassword |
1.3.6.1.4.1.171.10.94.89.89.26.11 |
Tok_String |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
rlTranslationNameToIpEntry |
1.3.6.1.4.1.171.10.94.89.89.26.12.1 |
The row definition for this table. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
RlTranslationNameToIpEntry |
|
|
rlOspf |
1.3.6.1.4.1.171.10.94.89.89.26.14 |
OBJECT IDENTIFIER |
|
|
|
rlIpAddrTableMibVersion |
1.3.6.1.4.1.171.10.94.89.89.26.15 |
The IpAddrTable MIB's version. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rlIpCidrRouteExtTable |
1.3.6.1.4.1.171.10.94.89.89.26.16 |
Augmenting ipCidrRouteTable (ip forwarfing information table)
for added info as read only |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
RlIpCidrRouteExtEntry |
|
rlIpCidrRouteExtEntry |
1.3.6.1.4.1.171.10.94.89.89.26.16.1 |
A row of the table ipCidrRouteTable Extended
by this definition. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
RlIpCidrRouteExtEntry |
|
|
rlIpCidrRouteProto |
1.3.6.1.4.1.171.10.94.89.89.26.16.1.1 |
Added infor for ipCidrRouteTable.
extends the info of ipCidrRouteProto to show the route inner protocol.
Allowes the user to see which type of route in the protocol
e.g. ospf internal, ospf external. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
local(1), netmgmt(2), rip(3), ospfInternal(4), ospfExternal(5), ospfAggregateNetRange(6), bgp4Internal(7), bgp4External(8), aggregateRoute(9), other(10) |
|
rlIpStaticRouteTable |
1.3.6.1.4.1.171.10.94.89.89.26.17.1 |
This entity's static (user configured) IP Routing table.
entries are MAX-ACCESSible even if not used for forwarding |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
RlIpStaticRouteEntry |
|
rlIpStaticRouteEntry |
1.3.6.1.4.1.171.10.94.89.89.26.17.1.1 |
A particular Static(user configured) route to a particular destina-
tion, under a particular policy. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
RlIpStaticRouteEntry |
|
|
rlIpStaticRouteDest |
1.3.6.1.4.1.171.10.94.89.89.26.17.1.1.1 |
The destination IP address of this route.
This object may not take a Multicast (Class D)
address value.
Any assignment (implicit or otherwise) of an
instance of this object to a value x must be
rejected if the bitwise logical-AND of x with
the value of the corresponding instance of the
rlIpStaticRouteMask object is not equal to x. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
rlIpStaticRouteMask |
1.3.6.1.4.1.171.10.94.89.89.26.17.1.1.2 |
Indicate the mask to be logical-ANDed with the
destination address before being compared to
the value in the rlIpStaticRouteDest field. For
those systems that do not support arbitrary
subnet masks, an agent constructs the value of
the rlIpStaticRouteMask by reference to the IP Ad-
dress Class.
Any assignment (implicit or otherwise) of an
instance of this object to a value x must be
rejected if the bitwise logical-AND of x with
the value of the corresponding instance of the
rlIpStaticRouteDest object is not equal to ipCidrRoute-
Dest. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
rlIpStaticRouteTos |
1.3.6.1.4.1.171.10.94.89.89.26.17.1.1.3 |
See ipCidrRouteTos definition
For now only value 0 is valid |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rlIpStaticRouteNextHop |
1.3.6.1.4.1.171.10.94.89.89.26.17.1.1.4 |
On remote routes, the address of the next sys-
tem en route; Otherwise, 0.0.0.0. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
rlIpStaticRouteMetric |
1.3.6.1.4.1.171.10.94.89.89.26.17.1.1.5 |
The routing metric for this route.
The semantics of this metric are determined by the user.
normal semantic will be next hop count or some administarative distance
to create routing policy. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rlIpStaticRouteType |
1.3.6.1.4.1.171.10.94.89.89.26.17.1.1.6 |
The type of route. Note that local(3) refers
to a route for which the next hop is the final
destination this is the case when user overides the a local interface
entry to change it parameters;
remote(4) refers to a route for
which the next hop is not the final destina-
tion.
reject (2) refers to a route which, if matched, discards
the message as unreachable. This is may be used as a means of
correctly aggregating routes, When static routes are distributed (leaked)
to other protocols. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
reject(1), local(2), remote(3) |
|
rlIpStaticRouteNextHopAS |
1.3.6.1.4.1.171.10.94.89.89.26.17.1.1.7 |
The Autonomous System Number of the Next Hop.
The semantics of this object are determined by
the routing-protocol specified in the route's
ipCidrRouteProto value. When this object is
unknown or not relevant its value should be set
to zero. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rlIpStaticRouteForwardingStatus |
1.3.6.1.4.1.171.10.94.89.89.26.17.1.1.8 |
active - An indication that the route has implication on routing
inactive - the route is a backup route or it is down. It is not used
in forwarding decision.
Down means that the Ip interface on which it is configured is down.
(Note: ip interface down may be for two reason - its admin status or
the L2 interface , on which the ip interface is configured, status |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
active(1), inactive(2) |
|
rlIpStaticRouteRowStatus |
1.3.6.1.4.1.171.10.94.89.89.26.17.1.1.9 |
The row status variable, used according to
row installation and removal conventions. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
RowStatus |
|
|
rlIpStaticRouteOwner |
1.3.6.1.4.1.171.10.94.89.89.26.17.1.1.10 |
Static - The route is configured over Static IP.
This route is written to configuration files.
Dhcp - The route is Configured by DHCP
(received as part of DHCP configuration)
This route IS NOT written to configuration files
Dhcp - The route is Configured default system config
exist till any other configuration
is applied |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
static(1), dhcp(2), default(3) |
|
rlIpRouter |
1.3.6.1.4.1.171.10.94.89.89.26.18 |
OBJECT IDENTIFIER |
|
|
|