DGS-6600-EQUIPMENT-MIB

File: DGS-6600-EQUIPMENT-MIB.mib (28263 bytes)

Imported modules

SNMPv2-SMI	SNMPv2-TC	RFC1213-MIB
DGS-6600-ID-MIB

Imported symbols

MODULE-IDENTITY	OBJECT-TYPE	Integer32
MacAddress	DisplayString	dgs6600-system

Defined Types

ChassisControlModuleLEDInfoEntry
SEQUENCE
	chassisControlModuleLEDInfoIndex	INTEGER
	chassisControlModuleLEDInfoConsole	INTEGER
	chassisControlModuleLEDInfoMaster	INTEGER
	chassisControlModuleLEDInfoCPUUtilization	INTEGER
	chassisControlModuleLEDInfoMgmtPortStatus	INTEGER
	chassisControlModuleLEDInfoMgmtPortSpeed	INTEGER

ChassisPowerInfoEntry
SEQUENCE
	chassisPowerIndex	INTEGER
	chassisPowerExist	INTEGER
	chassisPowerType	INTEGER
	chassisPowerAlive	INTEGER
	chassisPowerVoltage	INTEGER
	chassisPowerCurrent	INTEGER
	chassisPowerPowerWatt	INTEGER
	chassisPowerFanSpeed	INTEGER

ChassisFanInfoEntry
SEQUENCE
	chassisFanIndex	INTEGER
	chassisFanStatus	INTEGER
	chassisFanSpeed	INTEGER

ChassisSlotInfoEntry
SEQUENCE
	chassisSlotIndex	INTEGER
	chassisSlotState	INTEGER
	chassisSlotLEDPoEModeEnabled	INTEGER
	chassisSlotModel	DisplayString
	chassisSlotSerialNumber	DisplayString
	chassisSlotHwVersion	DisplayString
	chassisSlotPCBAVersion	DisplayString
	chassisSlotBootloaderVersion	DisplayString
	chassisSlotRuntimeVersion	DisplayString
	chassisSlotCPLDVersion	DisplayString
	chassisSlotFirsMacAddress	MacAddress
	chassisSlotNumberOfMacAddress	INTEGER

ChassisTemperatureInfoEntry
SEQUENCE
	chassisTemperatureSlotIndex	INTEGER
	chassisTemperatureInletCurrent	DisplayString
	chassisTemperatureInletOverheat	DisplayString
	chassisTemperatureInletHeatdown	DisplayString
	chassisTemperatureCenterCurrent	DisplayString
	chassisTemperatureCenterOverheat	DisplayString
	chassisTemperatureCenterHeatdown	DisplayString
	chassisTemperatureOutletCurrent	DisplayString
	chassisTemperatureOutletOverheat	DisplayString
	chassisTemperatureOutletHeatdown	DisplayString

ChassisPortLEDInfoEntry
SEQUENCE
	chassisPortLEDIFIndex	Integer32
	chassisPortLEDIFName	DisplayString
	chassisPortLEDStatus	INTEGER
	chassisPortLEDMode	INTEGER
	chassisPortLEDMediumType	INTEGER

Defined Values

dgs6600EquipmentMIB		1.3.6.1.4.1.171.10.120.100.1.2
The structure of chassis HW function for the proprietary enterprise.
MODULE-IDENTITY

chassisControlModuleLEDInfo		1.3.6.1.4.1.171.10.120.100.1.2.1
OBJECT IDENTIFIER

chassisPowerInfo		1.3.6.1.4.1.171.10.120.100.1.2.2
OBJECT IDENTIFIER

chassisFanTrayInfo		1.3.6.1.4.1.171.10.120.100.1.2.3
OBJECT IDENTIFIER

chassisSlotInfo		1.3.6.1.4.1.171.10.120.100.1.2.4
OBJECT IDENTIFIER

chassisTemperatureInfo		1.3.6.1.4.1.171.10.120.100.1.2.5
OBJECT IDENTIFIER

chassisPortLEDInfo		1.3.6.1.4.1.171.10.120.100.1.2.6
OBJECT IDENTIFIER

chassisControlModuleLEDInfoTable		1.3.6.1.4.1.171.10.120.100.1.2.1.1
TBD.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ChassisControlModuleLEDInfoEntry

chassisControlModuleLEDInfoEntry		1.3.6.1.4.1.171.10.120.100.1.2.1.1.1
TBD.
Status: current	Access: not-accessible
OBJECT-TYPE
	ChassisControlModuleLEDInfoEntry

chassisControlModuleLEDInfoIndex		1.3.6.1.4.1.171.10.120.100.1.2.1.1.1.1
This object indicates the slot index of Control Module.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	1..8

chassisControlModuleLEDInfoConsole		1.3.6.1.4.1.171.10.120.100.1.2.1.1.1.2
This object indicates the console type. There are two different interfaces: 1: RS232. 2: USB.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	rs232(1), usb(2)

chassisControlModuleLEDInfoMaster		1.3.6.1.4.1.171.10.120.100.1.2.1.1.1.3
This object indicates whether this control module is master or not? 1: This control module is active CM. 2: This control module is standby CM.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	active(1), standby(2)

chassisControlModuleLEDInfoCPUUtilization		1.3.6.1.4.1.171.10.120.100.1.2.1.1.1.4
This object indicates the CPU utilization(in percentage) of this control module.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	zero-LED(0), one-LED(1), two-LEDs(2), three-LEDs(3), four-LEDs(4), five-LEDs(5), six-LEDs(6), seven-LEDs(7), eight-LEDs(8)

chassisControlModuleLEDInfoMgmtPortStatus		1.3.6.1.4.1.171.10.120.100.1.2.1.1.1.5
This object indicates the management port status.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	off(1), steady-green(2), blinking-green(3)

chassisControlModuleLEDInfoMgmtPortSpeed		1.3.6.1.4.1.171.10.120.100.1.2.1.1.1.6
This object indicates the management port link speed.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	link-0(1), link-100(2), link-1000(3)

chassisPowerInfoTable		1.3.6.1.4.1.171.10.120.100.1.2.2.1
TBD.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ChassisPowerInfoEntry

chassisPowerInfoEntry		1.3.6.1.4.1.171.10.120.100.1.2.2.1.1
TBD.
Status: current	Access: not-accessible
OBJECT-TYPE
	ChassisPowerInfoEntry

chassisPowerIndex		1.3.6.1.4.1.171.10.120.100.1.2.2.1.1.1
This object indicates the PSU index.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	1..8

chassisPowerExist		1.3.6.1.4.1.171.10.120.100.1.2.2.1.1.2
This object indicates whether the specified PSU is exist or not. 1: The PSU is not exist. 2: The PSU is installed.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	empty(1), exist(2)

chassisPowerType		1.3.6.1.4.1.171.10.120.100.1.2.2.1.1.3
This object indicates the PSU type. 1: The PSU type is AC. 2: The PSU type is DC. 3: The PSU type is unknown.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	ac(1), dc(2), unknown(3)

chassisPowerAlive		1.3.6.1.4.1.171.10.120.100.1.2.2.1.1.4
This object indicates whether the specified PSU is alive or not. 1: The PSU is not available. 2: The PSU is working normally.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	failed(1), in-operation(2)

chassisPowerVoltage		1.3.6.1.4.1.171.10.120.100.1.2.2.1.1.5
This object indicates the output voltage(V) of the specified PSU.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

chassisPowerCurrent		1.3.6.1.4.1.171.10.120.100.1.2.2.1.1.6
This object indicates the output current(mA) of the specified PSU.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

chassisPowerPowerWatt		1.3.6.1.4.1.171.10.120.100.1.2.2.1.1.7
This object indicates the output power(W) of the specified PSU.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

chassisPowerFanSpeed		1.3.6.1.4.1.171.10.120.100.1.2.2.1.1.8
This object indicates the internal fan speed(rpm) of specified PSU.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

chassisFanTrayInfoState		1.3.6.1.4.1.171.10.120.100.1.2.3.1
This object indicates the fan tray state. There are three different state: 1. Not existed 2. Existed but failed 3. Working normally
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	not-exist(1), failed(2), in-operation(3)

chassisFanInfoTable		1.3.6.1.4.1.171.10.120.100.1.2.3.2
TBD.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ChassisFanInfoEntry

chassisFanInfoEntry		1.3.6.1.4.1.171.10.120.100.1.2.3.2.1
TBD.
Status: current	Access: not-accessible
OBJECT-TYPE
	ChassisFanInfoEntry

chassisFanIndex		1.3.6.1.4.1.171.10.120.100.1.2.3.2.1.1
This object indicates the fan tray index.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	1..16

chassisFanStatus		1.3.6.1.4.1.171.10.120.100.1.2.3.2.1.2
This object indicates the fan status(ok or failed).
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	failed(1), ok(2)

chassisFanSpeed		1.3.6.1.4.1.171.10.120.100.1.2.3.2.1.3
This object indicates the fan speed in RPM.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

chassisSlotInfoTable		1.3.6.1.4.1.171.10.120.100.1.2.4.1
TBD.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ChassisSlotInfoEntry

chassisSlotInfoEntry		1.3.6.1.4.1.171.10.120.100.1.2.4.1.1
TBD.
Status: current	Access: not-accessible
OBJECT-TYPE
	ChassisSlotInfoEntry

chassisSlotIndex		1.3.6.1.4.1.171.10.120.100.1.2.4.1.1.1
This object indicates the slot index.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	1..8

chassisSlotState		1.3.6.1.4.1.171.10.120.100.1.2.4.1.1.2
This object indicates the slot state: 1: The slot has no card installed. 2: The card which installed at this slot is not powered up. 3: The card which installed at this slot is failed. 4: The card which installed at this slot is booting up. 5: The card is powered up.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	empty(1), no-power(2), failed(3), booting(4), in-operation(5)

chassisSlotLEDPoEModeEnabled		1.3.6.1.4.1.171.10.120.100.1.2.4.1.1.3
This object indicates whether the PoE mode is enabled or not?
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	disabled(1), enabled(2)

chassisSlotModel		1.3.6.1.4.1.171.10.120.100.1.2.4.1.1.4
This object indicates the card model name.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

chassisSlotSerialNumber		1.3.6.1.4.1.171.10.120.100.1.2.4.1.1.5
This object indicates the serial number of the installed card.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

chassisSlotHwVersion		1.3.6.1.4.1.171.10.120.100.1.2.4.1.1.6
This object indicates the HW version of the installed card.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

chassisSlotPCBAVersion		1.3.6.1.4.1.171.10.120.100.1.2.4.1.1.7
This object indicates the PCBA version of the installed card.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

chassisSlotBootloaderVersion		1.3.6.1.4.1.171.10.120.100.1.2.4.1.1.8
This object indicates the PCBA version of the installed card.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

chassisSlotRuntimeVersion		1.3.6.1.4.1.171.10.120.100.1.2.4.1.1.9
This object indicates the runtime version of the installed card.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

chassisSlotCPLDVersion		1.3.6.1.4.1.171.10.120.100.1.2.4.1.1.10
This object indicates the CPLD version of the installed card.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

chassisSlotFirsMacAddress		1.3.6.1.4.1.171.10.120.100.1.2.4.1.1.11
This object indicates the first MAC address of the installed card.
Status: current	Access: read-only
OBJECT-TYPE
	MacAddress

chassisSlotNumberOfMacAddress		1.3.6.1.4.1.171.10.120.100.1.2.4.1.1.12
This object indicates the number of MAC address of the installed card.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

chassisTemperatureInfoTable		1.3.6.1.4.1.171.10.120.100.1.2.5.1
TBD.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ChassisTemperatureInfoEntry

chassisTemperatureInfoEntry		1.3.6.1.4.1.171.10.120.100.1.2.5.1.1
TBD.
Status: current	Access: not-accessible
OBJECT-TYPE
	ChassisTemperatureInfoEntry

chassisTemperatureSlotIndex		1.3.6.1.4.1.171.10.120.100.1.2.5.1.1.1
This object indicates the slot number which is currently querying.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	1..8

chassisTemperatureInletCurrent		1.3.6.1.4.1.171.10.120.100.1.2.5.1.1.2
This object displays the current temperature of Inlet sensor.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

chassisTemperatureInletOverheat		1.3.6.1.4.1.171.10.120.100.1.2.5.1.1.3
This object displays the overheat threshold of Inlet sensor.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

chassisTemperatureInletHeatdown		1.3.6.1.4.1.171.10.120.100.1.2.5.1.1.4
This object displays the heatdown threshold of Inlet sensor.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

chassisTemperatureCenterCurrent		1.3.6.1.4.1.171.10.120.100.1.2.5.1.1.5
This object displays the current temperature of Center sensor.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

chassisTemperatureCenterOverheat		1.3.6.1.4.1.171.10.120.100.1.2.5.1.1.6
This object displays the overheat threshold of Center sensor.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

chassisTemperatureCenterHeatdown		1.3.6.1.4.1.171.10.120.100.1.2.5.1.1.7
This object displays the heatdown threshold of Center sensor.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

chassisTemperatureOutletCurrent		1.3.6.1.4.1.171.10.120.100.1.2.5.1.1.8
This object displays the current temperature of Outlet sensor. The string N/A will be displayed to indicate that the card has no this sensor.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

chassisTemperatureOutletOverheat		1.3.6.1.4.1.171.10.120.100.1.2.5.1.1.9
This object displays the overheat threshold of Outlet sensor. The string N/A will be displayed to indicate that the card has no this sensor.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

chassisTemperatureOutletHeatdown		1.3.6.1.4.1.171.10.120.100.1.2.5.1.1.10
This object displays the outlet threshold of Outlet sensor. The string N/A will be displayed to indicate that the card has no this sensor.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

chassisPortLEDInfoTable		1.3.6.1.4.1.171.10.120.100.1.2.6.1
TBD.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ChassisPortLEDInfoEntry

chassisPortLEDInfoEntry		1.3.6.1.4.1.171.10.120.100.1.2.6.1.1
TBD.
Status: current	Access: not-accessible
OBJECT-TYPE
	ChassisPortLEDInfoEntry

chassisPortLEDIFIndex		1.3.6.1.4.1.171.10.120.100.1.2.6.1.1.1
This object indicates the interface index.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

chassisPortLEDIFName		1.3.6.1.4.1.171.10.120.100.1.2.6.1.1.2
This object indicates the interface name.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

chassisPortLEDStatus		1.3.6.1.4.1.171.10.120.100.1.2.6.1.1.3
This object indicates the port LED status: 1: The port LED status of the interface index is off. 2: The port LED status of the interface index is steady-amber. 3: The port LED status of the interface index is steady-green. 4: The port LED status of the interface index is blinking-amber. 5: The port LED status of the interface index is blinking-green.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	off(1), steady-amber(2), steady-green(3), blinking-amber(4), blinking-green(5)

chassisPortLEDMode		1.3.6.1.4.1.171.10.120.100.1.2.6.1.1.4
This object indicates the port LED mode: 1: The port LED is in Ethernet mode. 2: The poer LED is in PoE mode.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	ethernet(1), poe(2)

chassisPortLEDMediumType		1.3.6.1.4.1.171.10.120.100.1.2.6.1.1.5
This object indicates the port LED medium type: 1: The medium type of port LED is copper. 2: The medium type of port LED is fiber.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	copper(1), fiber(2)

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor