BAY-STACK-EDM-MIB
File:
BAY-STACK-EDM-MIB.mib (3636 bytes)
Imported modules
Imported symbols
Defined Values
| bayStackEdmMib |
1.3.6.1.4.1.45.5.36 |
| Enterprise Device Manager (EDM) MIB for the Avaya stackable
Ethernet Routing Switches family
Copyright 2013 Avaya Networks
All rights reserved.
This Avaya Networks SNMP Management Information Base
Specification embodies Avaya Networks' confidential and
proprietary intellectual property. Avaya Networks retains
all title and ownership in the Specification, including any
revisions.
This Specification is supplied 'AS IS,' and Avaya Networks
makes no warranty, either express or implied, as to the use,
operation, condition, or performance of the Specification. |
| MODULE-IDENTITY |
|
|
|
| bsEdmHelpFilePath |
1.3.6.1.4.1.45.5.36.1.1.1 |
| This object is used to specify the location of the EDM help file.
The value is an ASCII string similar to a URL, and must be in one
of the following formats:
- 'usb://' - the help file is located on the usb port
of the switch, if not in stack, or on the usb
port of the base unit, if in stack.
- 'usb:///' - the help file is located
on the usb port of the switch, if not in stack,
or on the usb port of the specified unit,
if in stack. The unit number must be between 1
and 8.
- 'tftp:///' - the help file is located
on the TFTP server at the specified IP address.
- 'tftp:///' - the help file is located on
the TFTP server at the specified host. The hostname
must have at most 64 characters in length.
In each of the supported formats, the filename must have at most
255 characters in length. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
Size(0..327) |
|
| bsEdmInactivityTimeout |
1.3.6.1.4.1.45.5.36.1.1.2 |
| Used to indicate the amount of idle time, in seconds,
to wait before timing out an EDM session. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
30..65535 |
|