ASCEND-TRAP
File:
ASCEND-TRAP.mib (19977 bytes)
Imported modules
Imported symbols
Defined Values
portInactive |
0 |
The host port associated with the indicated ifIndex
has changed to the inactive state. |
TRAP-TYPE |
|
|
|
portDualDelay |
1 |
The host port associated with the indicated ifIndex
is delaying the dialing of a second call to avoid
overloading devices that can not handle two calls in
close succession. |
TRAP-TYPE |
|
|
|
portWaitSerial |
2 |
The host port associated with the indicated ifIndex
has detected DTR when in V.25bis mode and is waiting
for an HDLC controller to come on line. CTS is off. |
TRAP-TYPE |
|
|
|
portHaveSerial |
3 |
The host port associated with the indicated ifIndex
is ready to accept V.25bis commands. CTS is on. |
TRAP-TYPE |
|
|
|
portRinging |
4 |
The host port associated with the indicated ifIndex
is has been notified of an incoming call. |
TRAP-TYPE |
|
|
|
portCollectDigits |
5 |
The host port associated with the indicated ifIndex
is collecting digits from the RS-366 dialing
interface. |
TRAP-TYPE |
|
|
|
portWaiting |
6 |
The host port associated with the indicated ifIndex
is waiting for connect notification from the network
after dialing or answer notification has been issued. |
TRAP-TYPE |
|
|
|
portConnected |
7 |
The host port associated with the indicated ifIndex
has connected to the far end, but end-to-end data
flow has not yet been enabled. |
TRAP-TYPE |
|
|
|
portCarrier |
8 |
The host port associated with the indicated ifIndex
has connected to the far end and has end-to-end data
flow. |
TRAP-TYPE |
|
|
|
portLoopback |
9 |
The host port associated with the indicated ifIndex
has been placed in local loopback mode. |
TRAP-TYPE |
|
|
|
portAcrPending |
10 |
The host port associated with the indicated ifIndex
has set ACR on the RS-366 dialing interface and is
waiting for the host device to detect the transition. |
TRAP-TYPE |
|
|
|
portDteNotReady |
11 |
The host port associated with the indicated ifIndex
is waiting for the DTE to signal a ready condition
when performing X.21 dialing. |
TRAP-TYPE |
|
|
|
consoleStateChange |
12 |
The console associated with the passed console
index has changed state. The console entry
can be read to see what its current state is. |
TRAP-TYPE |
|
|
|
portUseExceeded |
13 |
The port associated with the indicated ifIndex has
exceeded the number of DS0 minutes allocated to it. |
TRAP-TYPE |
|
|
|
maxTelnetAttempts |
15 |
The maximum number of login attempts for a telnet
session has been exceeded. |
TRAP-TYPE |
|
|
|
eventTableOverwrite |
16 |
A new event has overwritten an unread event.
This trap is sent only for systems which
support Ascend's accounting MIB.
Once sent, additional overwrites will not
cause another trap to be sent until at least
1 table's worth of new events have occured. |
TRAP-TYPE |
|
|
|
multicastHeartBeatMonitor |
19 |
This trap is sent when heartBeat fails to receive
configured number of heartBeat packets from
heartBeat servers |
TRAP-TYPE |
|
|
|
lanModemMovedToSuspectList |
20 |
This trap is sent to all the managers in the
alarm group when a lan modem (digital modem) is moved
to the suspect list.
Refer to the lanModemGroup.suspectLanModemTable
description. |
TRAP-TYPE |
|
|
|
dirdoListFailure |
21 |
This trap is sent to all the managers in the
alarm group when a T_ONLINE call comes in and
no answer/subaddresses have been received. |
TRAP-TYPE |
|
|
|
sysSlotStateChange |
22 |
This trap is sent to all the managers in the
slot group when a slot card's SLOT-STATE profile
is created due to slot insertion, or the current-state
transitions into oper-state-down, oper-state-up,
oper-state-dump, or oper-state-none states.
Refer to the slotTable.slotIndex and
slotTable.slotStatus descriptions. |
TRAP-TYPE |
|
|
|
powerSupplyStateChange |
23 |
This trap is sent to all the managers in the
alarm group when a power supply module is
added or removed. |
TRAP-TYPE |
|
|
|
multiShelfStateChange |
25 |
This trap is sent to all the managers in the
slot group when a master shelf detects up/down
state changes of the peer shelf in a multi-shelf
configuration. |
TRAP-TYPE |
|
|
|
sysLastRestartReasonTrap |
26 |
This trap is sent to all managers having the
alarm condition enabled if the sysLastRestartReason
is not unknown (value of 0). |
TRAP-TYPE |
|
|
|
atmpMaxTunnelExceeded |
27 |
This is generated when the number of tunnels to a Home
Network exceeds the maximum tunnels. atmpHAIpAddress is
the Home Agent and atmpHNProfileName is the name of the
connection profile. |
TRAP-TYPE |
|
|
|
atmpAgentErrorSentTrap |
28 |
This trap indicates errors at the Agent level or
with Tunnel creation. |
TRAP-TYPE |
|
|
|
atmpAgentErrorRecvTrap |
29 |
This trap indicates errors received from a peer
agent. |
TRAP-TYPE |
|
|
|
systemClockDrifted |
33 |
This trap indicates system clock has drifted but
could not be corrected.
This trap sent to managers when the alarm
and clock drifted params are set to YES in a
trap profile. If the clock drifting problem
persists, the trap will only be sent every
24 hours. |
TRAP-TYPE |
|
|
|
suspectAccessResource |
34 |
The access resource suspected trap is sent to
all the managers in the alarm group when a
terminating resource such as modem become suspect.
The suspected resource(s) are not assigned to
terminate calls until the resource in the available
pool exhausted. |
TRAP-TYPE |
|
|
|
slotCardResetTrap |
36 |
This trap is sent to all managers having the
alarm condition enabled |
TRAP-TYPE |
|
|
|
controllerSwitchoverTrap |
37 |
System controller changed. The primary system
controller changed from cntrReduSwitchIndex
to cntrReduCurrentIndex. |
TRAP-TYPE |
|
|
|
callLogServChange |
38 |
This trap is sent to indicate that the call
logging server has changed. |
TRAP-TYPE |
|
|
|
voipGkChange |
39 |
This trap is sent when there is a change in the
gatekeeper which is registered with the gateway
in a VOIP configuration. |
TRAP-TYPE |
|
|
|
wanLineStateChange |
40 |
This trap is sent to indicate a change in the state
of a T1/E1 line : trunk, quiesced or disabled |
TRAP-TYPE |
|
|
|
callLogDroppedPkt |
41 |
This trap indicates that a call logging packet was
dropped. A count value of 1 indicates the start
of dropping of call logging packets. A count value
of 0 indicates that all is well again. |
TRAP-TYPE |
|
|
|
megacoLinkStatusTrap |
42 |
This trap indicates that operational status
of a media gateway control link has changed. |
TRAP-TYPE |
|
|
|
sparingSlotStatusChange |
43 |
This trap indicates that the slot sparing state
has changed at sparingSlotLastStatusChange to
sparingSlotStatus.
The slot affected is sparingSlotPrimaryIndex. |
TRAP-TYPE |
|
|
|
sparingIfStatusChange |
44 |
This trap indicates that the interface sparing state
has changed at sparingIfLastStatusChange to
sparingIfStatus.
The slot affected is sparingIfPrimaryIndex. |
TRAP-TYPE |
|
|
|
cntrReduAvailTrap |
45 |
The redundancy availability for the controller in slot
cntrReduAvailSlotIndex changed from cntrReduAvailPrevState
to cntrReduAvailCurrState at cntrReduAvailLastTime. |
TRAP-TYPE |
|
|
|