EqptHolderEntry |
|
SEQUENCE |
|
|
|
|
eqptHolderId |
EqptHolderIndex |
|
|
eqptHolderClass |
INTEGER |
|
|
eqptHolderPlannedType |
DisplayString |
|
|
eqptHolderActualType |
DisplayString |
|
|
eqptHolderAdminStatus |
INTEGER |
|
|
eqptHolderOperStatus |
INTEGER |
|
|
eqptHolderOperError |
INTEGER |
|
|
eqptHolderAvailStatus |
INTEGER |
|
|
eqptHolderDescription |
DisplayString |
|
|
eqptHolderContainerId |
INTEGER |
|
|
eqptHolderContainerOffset |
INTEGER |
|
|
eqptHolderMode |
INTEGER |
|
|
eqptHolderSerialNumber |
DisplayString |
|
|
eqptHolderVariant |
DisplayString |
|
|
eqptHolderICScode |
DisplayString |
|
EqptBoardEntry |
|
SEQUENCE |
|
|
|
|
eqptSlotId |
EqptSlotIndex |
|
|
eqptSlotPlannedType |
DisplayString |
|
|
eqptSlotActualType |
DisplayString |
|
|
eqptSlotPowerStatus |
INTEGER |
|
|
eqptBoardAdminStatus |
INTEGER |
|
|
eqptBoardOperStatus |
INTEGER |
|
|
eqptBoardOperError |
INTEGER |
|
|
eqptBoardAvailStatus |
INTEGER |
|
|
eqptBoardRestart |
INTEGER |
|
|
eqptBoardSwOverruleStatus |
INTEGER |
|
|
eqptBoardContainerId |
INTEGER |
|
|
eqptBoardContainerOffset |
INTEGER |
|
|
eqptBoardInventoryAlcatelCompanyId |
DisplayString |
|
|
eqptBoardInventoryTypeName |
DisplayString |
|
|
eqptBoardInventoryPBACode |
DisplayString |
|
|
eqptBoardInventoryFPBACode |
DisplayString |
|
|
eqptBoardInventoryICScode |
DisplayString |
|
|
eqptBoardInventoryCLEICode |
DisplayString |
|
|
eqptBoardInventorySerialNumber |
DisplayString |
|
|
eqptBoardInventoryLastFailedTest |
OCTET STRING |
Size(4) |
|
eqptSlotPlannedCapabilityProfile |
AsamProfilePointer |
|
|
eqptBoardCustAlarmProfile |
AsamProfilePointer |
|
|
eqptBoardLastRestartCause |
INTEGER |
|
|
eqptBoardLastRestartTime |
NetworkTimeInSeconds |
|
|
eqptBoardRestartNumberOfChanges |
Counter |
|
|
eqptBoardRelatedMgntEntityIPAddress |
IpAddress |
|
|
eqptBoardRelatedMgntEntityPairedNumber |
INTEGER |
|
|
eqptBoardDualHostIPAddress |
IpAddress |
|
|
eqptBoardDualHostLsmLocation |
EqptHolderIndexOrZero |
|
|
eqptBoardIfSlotId |
INTEGER |
|
|
eqptBoardRestartCountPerLt |
Counter |
|
|
eqptBoardClearRestartCountPerLt |
TruthValue |
|
EqptShelfSummaryEntry |
|
SEQUENCE |
|
|
|
|
eqptShelfHwNumberOfChanges |
Counter |
|
|
eqptShelfSlotSummaryOccupation |
OCTET STRING |
|
|
eqptShelfBoardSummaryAdmin |
OCTET STRING |
|
|
eqptShelfBoardSummaryAvail |
OCTET STRING |
|
|
eqptShelfBoardSummaryOper |
OCTET STRING |
|
|
eqptShelfBoardSummaryTypeMismatch |
OCTET STRING |
|
|
eqptShelfBoardSummaryAlarm |
OCTET STRING |
|
EqptProtGroupEntry |
|
SEQUENCE |
|
|
|
|
eqptProtGroupId |
INTEGER |
|
|
eqptProtGroupType |
INTEGER |
|
|
eqptProtGroupNumberOfChanges |
Counter |
|
|
eqptProtGroupSwitchoverCount |
Counter |
|
|
eqptProtGroupLastSwitchoverReason |
INTEGER |
|
|
eqptProtGroupEpsQuenchfactor |
TimeTicks |
|
|
eqptProtGroupAlarmBitmap |
INTEGER |
|
|
eqptProtGroupAdminStatus |
INTEGER |
|
|
eqptProtGroupAdminProtElement |
INTEGER |
|
|
eqptProtGroupOperProtElement |
INTEGER |
|
|
eqptProtGroupRowStatus |
RowStatus |
|
EqptProtElementEntry |
|
SEQUENCE |
|
|
|
|
eqptProtElementGroupId |
INTEGER |
|
|
eqptProtElementType |
INTEGER |
|
|
eqptProtElementStandbyStatus |
INTEGER |
|
|
eqptProtElementRedcyCtrlStatus |
INTEGER |
|
|
eqptProtElementRowStatus |
RowStatus |
|
|
eqptProtElementStandbyStatuschangeReason |
INTEGER |
|
EqptTestChainEntry |
|
SEQUENCE |
|
|
|
|
eqptTestChainShelfToTapUp |
INTEGER |
|
|
eqptTestChainExtTestHeadToTapUp |
INTEGER |
|
EqptCustAlarmProfileEntry |
|
SEQUENCE |
|
|
|
|
eqptCustAlarmProfileIndex |
AsamProfileIndex |
|
|
eqptCustAlarmProfileName |
AsamProfileName |
|
|
eqptCustAlarmProfileUsedStatus |
AsamProfileRefCount |
|
|
eqptCustAlarmProfileRowStatus |
RowStatus |
|
|
eqptCustAlarmProfileMnemonic1 |
DisplayString |
|
|
eqptCustAlarmProfileDescription1 |
DisplayString |
|
|
eqptCustAlarmProfileVisibleOutput1 |
EqptCustAlarmProfileOutputType |
|
|
eqptCustAlarmProfileAudibleOutput1 |
EqptCustAlarmProfileOutputType |
|
|
eqptCustAlarmProfilePolarity1 |
EqptCustAlarmProfilePolarityType |
|
|
eqptCustAlarmProfileSeverity1 |
AsamAlarmSeverityType |
|
|
eqptCustAlarmProfileMnemonic2 |
DisplayString |
|
|
eqptCustAlarmProfileDescription2 |
DisplayString |
|
|
eqptCustAlarmProfileVisibleOutput2 |
EqptCustAlarmProfileOutputType |
|
|
eqptCustAlarmProfileAudibleOutput2 |
EqptCustAlarmProfileOutputType |
|
|
eqptCustAlarmProfilePolarity2 |
EqptCustAlarmProfilePolarityType |
|
|
eqptCustAlarmProfileSeverity2 |
AsamAlarmSeverityType |
|
|
eqptCustAlarmProfileMnemonic3 |
DisplayString |
|
|
eqptCustAlarmProfileDescription3 |
DisplayString |
|
|
eqptCustAlarmProfileVisibleOutput3 |
EqptCustAlarmProfileOutputType |
|
|
eqptCustAlarmProfileAudibleOutput3 |
EqptCustAlarmProfileOutputType |
|
|
eqptCustAlarmProfilePolarity3 |
EqptCustAlarmProfilePolarityType |
|
|
eqptCustAlarmProfileSeverity3 |
AsamAlarmSeverityType |
|
|
eqptCustAlarmProfileMnemonic4 |
DisplayString |
|
|
eqptCustAlarmProfileDescription4 |
DisplayString |
|
|
eqptCustAlarmProfileVisibleOutput4 |
EqptCustAlarmProfileOutputType |
|
|
eqptCustAlarmProfileAudibleOutput4 |
EqptCustAlarmProfileOutputType |
|
|
eqptCustAlarmProfilePolarity4 |
EqptCustAlarmProfilePolarityType |
|
|
eqptCustAlarmProfileSeverity4 |
AsamAlarmSeverityType |
|
|
eqptCustAlarmProfileMnemonic5 |
DisplayString |
|
|
eqptCustAlarmProfileDescription5 |
DisplayString |
|
|
eqptCustAlarmProfileVisibleOutput5 |
EqptCustAlarmProfileOutputType |
|
|
eqptCustAlarmProfileAudibleOutput5 |
EqptCustAlarmProfileOutputType |
|
|
eqptCustAlarmProfilePolarity5 |
EqptCustAlarmProfilePolarityType |
|
|
eqptCustAlarmProfileSeverity5 |
AsamAlarmSeverityType |
|
EqptCustAlarmProfileMappingEntry |
|
SEQUENCE |
|
|
|
|
eqptCustAlarmProfileMappingName |
AsamProfileName |
|
|
eqptCustAlarmProfileMappingIndex |
AsamProfileIndex |
|
EqptBoardThermalSensorEntry |
|
SEQUENCE |
|
|
|
|
eqptBoardThermalSensorId |
INTEGER |
|
|
eqptBoardThermalSensorActualTemperature |
INTEGER |
|
|
eqptBoardThermalSensorTcaThresholdLow |
INTEGER |
|
|
eqptBoardThermalSensorTcaThresholdHigh |
INTEGER |
|
|
eqptBoardThermalSensorShutdownThresholdLow |
INTEGER |
|
|
eqptBoardThermalSensorShutdownThresholdHigh |
INTEGER |
|
EqptPortMappingEntry |
|
SEQUENCE |
|
|
|
|
eqptPortMappingLogPortNbr |
EqptPortMappingIndex |
|
|
eqptPortMappingLogPortType |
INTEGER |
|
|
eqptPortMappingPhyPortSlot |
EqptSlotIndex |
|
|
eqptPortMappingPhyPortType |
INTEGER |
|
|
eqptPortMappingPhyPortNbr |
INTEGER |
|
|
eqptPortMappingLSMSlot |
EqptSlotIndex |
|
|
eqptPortMappingChanges |
Counter |
|
EqptPortProtectionEntry |
|
SEQUENCE |
|
|
|
|
eqptPortProtectionPortId |
InterfaceIndex |
|
|
eqptPortProtectionRowStatus |
RowStatus |
|
|
eqptPortProtectionPairedPortId |
InterfaceIndex |
|
|
eqptPortProtectionPortStatus |
INTEGER |
|
|
eqptPortProtectionPairedPortStatus |
INTEGER |
|
|
eqptPortProtectionSwitchCommand |
InterfaceIndex |
|
|
eqptPortProtectionLastSwitchReason |
INTEGER |
|
|
eqptPortProtectionNumberOfSwitchovers |
INTEGER |
|
EqptPortProtectionLookupEntry |
|
SEQUENCE |
|
|
|
|
eqptPortProtectionLookupPortId |
InterfaceIndex |
|
|
eqptPortProtectionLookupPrimaryPortId |
InterfaceIndex |
|
EqptBoardPlannedResourceEntry |
|
SEQUENCE |
|
|
|
|
eqptBoardPlannedResourceId |
INTEGER |
|
|
eqptBoardPlannedResourceCurrentValue |
INTEGER |
|
|
eqptBoardPlannedResourceMaxValue |
INTEGER |
|
|
eqptBoardPlannedResourceDescription |
DisplayString |
|
EqptPowerEntry |
|
SEQUENCE |
|
|
|
|
eqptPowerId |
EqptHolderIndex |
|
|
eqptPowerAdminMode |
INTEGER |
|
|
eqptPowerOperMode |
INTEGER |
|
|
eqptPowerBatType |
INTEGER |
|
|
eqptPowerBatStartCapacity |
INTEGER |
|
|
eqptPowerBatPlannedLifetime |
INTEGER |
|
|
eqptPowerBatState |
INTEGER |
|
|
eqptPowerBatFailure |
INTEGER |
|
|
eqptPowerBatTemperature |
INTEGER |
|
|
eqptPowerBatActualCapacity |
INTEGER |
|
|
eqptPowerBatDefenseMode |
INTEGER |
|
|
eqptPowerBatDefenseThreshold |
INTEGER |
|
|
eqptPowerACState |
INTEGER |
|
|
eqptPowerACFailure |
INTEGER |
|
|
eqptPowerNDCaState |
INTEGER |
|
|
eqptPowerNDCaFailure |
INTEGER |
|
|
eqptPowerNDCbState |
INTEGER |
|
|
eqptPowerNDCbFailure |
INTEGER |
|
|
eqptPowerLDCaState |
INTEGER |
|
|
eqptPowerLDCaFailure |
INTEGER |
|
|
eqptPowerLDCbState |
INTEGER |
|
|
eqptPowerLDCbFailure |
INTEGER |
|
|
eqptPowerInVoltage |
INTEGER |
|
|
eqptPowerInCurrent |
INTEGER |
|
|
eqptPowerInConsumedPower |
INTEGER |
|
EqptPowerSupplyEntry |
|
SEQUENCE |
|
|
|
|
eqptPowerSupplyId |
EqptPowerSupplyIndex |
|
|
eqptPowerSupplyPartNumber |
OCTET STRING |
|
|
eqptPowerSupplyCleiCode |
OCTET STRING |
|
|
eqptPowerSupplySerNumber |
OCTET STRING |
|
|
eqptPowerSupplyVin |
INTEGER |
|
|
eqptPowerSupplyIin |
INTEGER |
|
|
eqptPowerSupplyVout |
INTEGER |
|
|
eqptPowerSupplyIout |
INTEGER |
|
|
eqptPowerSupplyTemperature |
INTEGER |
|
|
eqptPowerSupplyFaultVin |
INTEGER |
|
|
eqptPowerSupplyFaultVout |
INTEGER |
|
|
eqptPowerSupplyFaultIin |
INTEGER |
|
|
eqptPowerSupplyFaultIout |
INTEGER |
|
|
eqptPowerSupplyFaultTemperature |
INTEGER |
|
|
eqptPowerSupplyFaultCml |
INTEGER |
|
|
eqptPowerSupplyPresent |
INTEGER |
|
|
eqptPowerSupplyFaultDetected |
INTEGER |
|
EqptPowerRftcEntry |
|
SEQUENCE |
|
|
|
|
eqptPowerRftcId |
EqptHolderIndex |
|
|
eqptPowerRftcVCommon |
INTEGER |
|
|
eqptPowerRftcICommon |
INTEGER |
|
|
eqptPowerRftcTHotspot |
INTEGER |
|
|
eqptPowerRftcTAmbient |
INTEGER |
|
|
eqptPowerRftcSWVersion |
DisplayString |
|
|
eqptPowerRftcHWVersion |
DisplayString |
|
|
eqptPowerRftcHWRevision |
INTEGER |
|
|
eqptPowerRftcSerialnumber |
DisplayString |
|
|
eqptPowerRftcManufacturer |
DisplayString |
|
|
eqptPowerRftcLineCount |
INTEGER |
|
eqptHolderEntry |
1.3.6.1.4.1.637.61.1.23.2.1 |
An entry of the equipment holder table.
ALCATEL NOTE:
SUPPORT: YES |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
EqptHolderEntry |
|
|
eqptHolderMode |
1.3.6.1.4.1.637.61.1.23.2.1.12 |
This attribute identifies the holder mode and is used by
both the NEP shelf and the ARAM-E shelf:
ntbntio-supported: this mode works in the same manner as iSAM XD. The
LSM can only be used on LSM slot. NT in NTB is supported. NTIO is
also supported.
ntbntio-unsupported: In this mode, NTIO & NTB slot can be used as
LT slot. So, two more LSM can be supported in this mode. Therefore,
NTIO/NTB board is not supported.
ntb-unsupported: In this mode, NTB slot can be used as LT slot.
So one more LT can be supported in this mode. Therefore, NTB board will
not be supported. This mode is applicable for NFXS-B shelf only.
ntio-unsupported: In this mode, there is no NTIO; the slot can be
used for an LSM.
DEFAULTVALUE: The default Value of the eqptHolderMode depends
on the shelf type. In the case of ARAM-E, default will be ntio-unsupported.
All other shelves will default to ntbntio-supported mode.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: Yes DEFVALUE: See above UNITS: - |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
ntbntio-supported(1), ntbntio-unsupported(2), ntb-unsupported(3), ntbntioextlt-unsupported(4), ntio-unsupported(6), ngpon-supported(7), gpon-supported(8), ngpon-port-reduced(9) |
|
eqptBoardEntry |
1.3.6.1.4.1.637.61.1.23.3.1 |
An entry in the eqptBoardTable.
ALCATEL NOTE:
SUPPORT: YES |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
EqptBoardEntry |
|
|
eqptBoardOperError |
1.3.6.1.4.1.637.61.1.23.3.1.7 |
This attribute describes for what reason the board is not operational.
These values correspond with the alarms which are generated in case of
a failure.
This attribute is supported for all type of boards: NT, EXT, LSM,
ACU, CTRL, applique.
Default value is no-error, replaced by result from startup sequence.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: 1..15, 255
PERSIST: NO DEFVALUE: 1 UNITS: - |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
no-error(1), type-mismatch(2), board-missing(3), board-installation-missing(4), no-planned-board(5), waiting-for-sw(6), init-boot-failed(7), init-download-failed(8), init-connection-failed(9), init-configuration-failed(10), board-reset-protection(11), invalid-parameter(12), temperature-alarm(13), tempshutdown(14), defense(15), board-not-licensed(16), sem-power-fail(17), sem-ups-fail(18), board-in-incompatible-slot(19), download-ongoing(21), unknown-error(255) |
|
eqptBoardAvailStatus |
1.3.6.1.4.1.637.61.1.23.3.1.8 |
This attribute provides further information regarding the state
of the board. It is set to available after a successfull selftest
of the board (if applicable).
This attribute is supported for all type of boards: NT, EXT, LSM,
ACU, CTRL, applique.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: 1..7
PERSIST: NO DEFVALUE: NA UNITS: - |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
available(1), inTest(2), failed(3), powerOff(4), notInstalled(5), offLine(6), dependency(7) |
|
eqptBoardRestart |
1.3.6.1.4.1.637.61.1.23.3.1.9 |
Writing a valid value to this object will restart the board in the
specified mode.
This attribute is only supported for the following type of boards:
NT, EXT, managed LSM, ACU, CTRL. For ACU and CTRL boards, only a
restart without selftest is supported. An exception is the NRCD-C,
FD-REM CTRL board, that has LT capabilities (restart with/without
selftest) next to the regular CTRL capabilities.
Contains previous restart reason, if not available it has value 255.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: YES RANGE: 1, 2, 5, 255
PERSIST: YES DEFVALUE: NA UNITS: - |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
with-selftest(1), without-selftest(2), hot-restart(5), initialValue(255) |
|
eqptBoardLastRestartCause |
1.3.6.1.4.1.637.61.1.23.3.1.24 |
This attribute gives the last restart cause for board.
Currently only LSM board can support. Considering future safe,
only use default value for other board entry.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: unknown UNITS: - |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
poweron(1), unknown(2), watchdog(3), coldreset(4), warmreset(5), hotreset(6), hotreload(7), cleandata(8), emergencybuild(9), poweronreset(10), commitfailure(11), timezonemodified(12) |
|
eqptShelfSummaryEntry |
1.3.6.1.4.1.637.61.1.23.4.1 |
An entry of the shelf summary table.
ALCATEL NOTE:
SUPPORT: YES |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
EqptShelfSummaryEntry |
|
|
eqptProtGroupEntry |
1.3.6.1.4.1.637.61.1.23.5.2.1 |
An entry of the eqptProtGroupTable.
ALCATEL NOTE:
SUPPORT: YES |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
EqptProtGroupEntry |
|
|
eqptProtGroupLastSwitchoverReason |
1.3.6.1.4.1.637.61.1.23.5.2.1.5 |
This object contains the reason of the last switch over.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: 1..17
PERSIST: YES DEFVALUE: NA UNITS: - |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
noSwitchOver(1), forcedActive(2), boardNotPresent(3), extenderChainFailure(4), linkFailure(5), watchDogTimeOut(6), fileSystemCorrupt(7), configurationMismatch(8), boardUnplanned(9), boardLocked(10), shelfDefense(11), revertiveSwitchOver(12), lanxFailure(13), lanxHwFailure(14), lanxSdkFailure(15), dpoeAppFailure(16), dpoeUnreachable(17) |
|
eqptProtElementEntry |
1.3.6.1.4.1.637.61.1.23.5.3.1 |
An entry of the eqptProtElementTable.
ALCATEL NOTE:
SUPPORT: YES |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
EqptProtElementEntry |
|
|
eqptProtElementStandbyStatuschangeReason |
1.3.6.1.4.1.637.61.1.23.5.3.1.6 |
This attribute reflects the reason why the standby status of the protection group element has changed.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: 0..24
PERSIST: NO DEFVALUE: none(0) UNITS: - |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
none(0), protectionGroupLocked(1), forcedActive(2), peerLinkUnAvailable(3), peerLocked(4), peerNotPlanned(5), peerNotPluggedIn(6), databaseNotInSync(7), lanxDynamicDataNotSynced(8), lanxSdkFailure(9), lanxRecovSdkFailure(10), lanxHwFailure(11), lanxDynDataSyncFailure(12), lanxStaticSyncFailure(13), lanxPeerCommFailure(14), lanxFailure(15), linkGroupNotAvailable(16), ltNotEnabled(17), lanxHiGigFailure(18), lanxReconcileFailure(19), lanxDiscoveryFailure(20), dpoeAppFailure(21), dpoeCommFailure(22), dpoeSyncFailure(23), dpoeUnreachable(24) |
|
eqptProfileEntry |
1.3.6.1.4.1.637.61.1.23.6.1.1 |
An entry in the eqptProfileTable.
ALCATEL NOTE:
SUPPORT: YES |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
EqptProfileEntry |
|
|
eqptProfileApplicabilityEntry |
1.3.6.1.4.1.637.61.1.23.6.2.1 |
An entry in the eqptProfileApplicabilityTable.
ALCATEL NOTE:
SUPPORT: YES |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
EqptProfileApplicabilityEntry |
|
|
eqptTestChainEntry |
1.3.6.1.4.1.637.61.1.23.7.1 |
An entry in the eqptTestChainTable. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
EqptTestChainEntry |
|
|
eqptCustAlarmProfileEntry |
1.3.6.1.4.1.637.61.1.23.8.2.1 |
An entry in the eqptCustAlarmProfileTable.
ALCATEL NOTE:
SUPPORT: YES |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
EqptCustAlarmProfileEntry |
|
|
eqptCustAlarmProfileMappingEntry |
1.3.6.1.4.1.637.61.1.23.8.3.1 |
An entry (conceptual row) representing the Customizable Alarm Profile
Name to Index mapping. The system automatically creates an entry in
this table for each corresponding entry (custAlarm-profile) created
in the eqptCustAlarmProfileTable. Similarly, when a profile is
deleted, the corresponding entry in this table is also automatically
deleted by the system. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
EqptCustAlarmProfileMappingEntry |
|
|
eqptBoardThermalSensorEntry |
1.3.6.1.4.1.637.61.1.23.10.1 |
An entry of the equipment thermal sensor table on boards
ALCATEL NOTE:
SUPPORT: YES |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
EqptBoardThermalSensorEntry |
|
|
eqptPortMappingEntry |
1.3.6.1.4.1.637.61.1.23.13.1 |
An entry of the equipment PortMapping table.
ALCATEL NOTE:
SUPPORT: YES |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
EqptPortMappingEntry |
|
|
eqptPortMappingPhyPortType |
1.3.6.1.4.1.637.61.1.23.13.1.4 |
The physcial port type.
This field is not applicable for hostlinks.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: 1..3,5,10,11,12,13,14
PERSIST: NO DEFVALUE: 0 UNITS: - |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
not-applicable(1), sfp(2), xfp(3), vp(5), eth(10), mcast(11), ai(12), ieee(13), cfp(14) |
|
eqptPortProtectionEntry |
1.3.6.1.4.1.637.61.1.23.15.1 |
This entry represents a protection group which consists of two
ports. These two ports can be on the same LT board, or on
different LT's. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
EqptPortProtectionEntry |
|
|
eqptPortProtectionLookupEntry |
1.3.6.1.4.1.637.61.1.23.16.1 |
This entry represents a lookup protection group which consists
of two ports. The key is either a primary or a paired port
in the eqptPortProtectionTable. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
EqptPortProtectionLookupEntry |
|
|
eqptBoardPlannedResourceEntry |
1.3.6.1.4.1.637.61.1.23.17.1 |
An entry of the equipment planned resource table
ALCATEL NOTE:
SUPPORT: YES |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
EqptBoardPlannedResourceEntry |
|
|
eqptPowerEntry |
1.3.6.1.4.1.637.61.1.23.18.1 |
An entry of the equipment power table.
An entry will be instantiated for a system/rack or shelf with active
power management functionality.
At the time of writing VSRM-A shelf (SX) and NGVR (MX) with a planned
RANI-B/RPNI-B comply to this requirement.
ALCATEL NOTE:
SUPPORT: YES |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
EqptPowerEntry |
|
|
eqptPowerSupplyEntry |
1.3.6.1.4.1.637.61.1.23.19.1 |
An entry of the equipment power table.
An entry will be instantiated per power supply supported on the system.
ALCATEL NOTE:
SUPPORT: YES |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
EqptPowerSupplyEntry |
|
|
eqptPowerRftcEntry |
1.3.6.1.4.1.637.61.1.23.20.1.1 |
An entry of the equipment RFT-C power table.
ALCATEL NOTE:
SUPPORT: YES |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
EqptPowerRftcEntry |
|
|
eqptPowerRftcLineEntry |
1.3.6.1.4.1.637.61.1.23.20.2.1 |
An entry in the eqptPowerRftcLineTable.
ALCATEL NOTE:
SUPPORT: YES |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
EqptPowerRftcLineEntry |
|
|