ALTEON-CS-PHYSICAL-MIB

File: ALTEON-CS-PHYSICAL-MIB.mib (118084 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC BRIDGE-MIB
ALTEON-ROOT-MIB

Imported symbols

MODULE-IDENTITY OBJECT-TYPE Integer32
Counter32 Gauge32 TimeTicks
Unsigned32 DisplayString PhysAddress
BridgeId aws-switch

Defined Types

VlanCurCfgTableEntry  
SEQUENCE    
  vlanCurCfgVlanId Integer32
  vlanCurCfgPorts OCTET STRING
  vlanCurCfgState INTEGER
  vlanCurCfgBwmContract Integer32
  vlanCurCfgStg Integer32
  vlanCurCfgJumbo INTEGER
  vlanCurCfgLearn INTEGER
  vlanCurCfgShared INTEGER
  vlanCurCfgIpv6LlaGen INTEGER
  vlanCurCfgRouterAdv INTEGER
  vlanCurCfgReTransInt Unsigned32
  vlanCurCfgMinIntBwAdv INTEGER
  vlanCurCfgMaxIntBwAdv INTEGER
  vlanCurCfgMtu INTEGER
  vlanCurCfgCurHopLimit INTEGER
  vlanCurCfgMFlag INTEGER
  vlanCurCfgOFlag INTEGER
  vlanCurCfgRTime INTEGER
  vlanCurCfgRlTime INTEGER
  vlanCurCfgPlTime Unsigned32
  vlanCurCfgVlTime Unsigned32
  vlanCurCfgOpInfo INTEGER
  vlanCurCfgApInfo INTEGER
  vlanCurCfgVlanName DisplayString

VlanNewCfgTableEntry  
SEQUENCE    
  vlanNewCfgVlanId Integer32
  vlanNewCfgVlanName DisplayString
  vlanNewCfgPorts OCTET STRING
  vlanNewCfgState INTEGER
  vlanNewCfgAddPort Integer32
  vlanNewCfgRemovePort Integer32
  vlanNewCfgBwmContract Integer32
  vlanNewCfgStg Integer32
  vlanNewCfgJumbo INTEGER
  vlanNewCfgLearn INTEGER
  vlanNewCfgShared INTEGER
  vlanNewCfgIpv6LlaGen INTEGER
  vlanNewCfgRouterAdv INTEGER
  vlanNewCfgReTransInt Unsigned32
  vlanNewCfgMinIntBwAdv INTEGER
  vlanNewCfgMaxIntBwAdv INTEGER
  vlanNewCfgMtu INTEGER
  vlanNewCfgCurHopLimit INTEGER
  vlanNewCfgMFlag INTEGER
  vlanNewCfgOFlag INTEGER
  vlanNewCfgRTime INTEGER
  vlanNewCfgRlTime INTEGER
  vlanNewCfgPlTime Unsigned32
  vlanNewCfgVlTime Unsigned32
  vlanNewCfgOpInfo INTEGER
  vlanNewCfgApInfo INTEGER
  vlanNewCfgDelete INTEGER

LacpCurPortCfgTableEntry  
SEQUENCE    
  lacpCurPortCfgTableId Integer32
  lacpCurPortState INTEGER
  lacpCurPortActorPortPriority INTEGER
  lacpCurPortActorAdminKey INTEGER

LacpNewPortCfgTableEntry  
SEQUENCE    
  lacpNewPortCfgTableId Integer32
  lacpNewPortState INTEGER
  lacpNewPortActorPortPriority INTEGER
  lacpNewPortActorAdminKey INTEGER

TrunkGroupCurCfgTableEntry  
SEQUENCE    
  trunkGroupCurCfgIndex Integer32
  trunkGroupCurCfgPorts OCTET STRING
  trunkGroupCurCfgBwmContract Integer32
  trunkGroupCurCfgState INTEGER
  trunkGroupCurCfgName DisplayString

TrunkGroupNewCfgTableEntry  
SEQUENCE    
  trunkGroupNewCfgIndex Integer32
  trunkGroupNewCfgPorts OCTET STRING
  trunkGroupNewCfgAddPort Integer32
  trunkGroupNewCfgRemovePort Integer32
  trunkGroupNewCfgState INTEGER
  trunkGroupNewCfgBwmContract Integer32
  trunkGroupNewCfgDelete INTEGER
  trunkGroupNewCfgName DisplayString

StgCurCfgTableEntry  
SEQUENCE    
  stgCurCfgIndex Integer32
  stgCurCfgState INTEGER
  stgCurCfgPriority INTEGER
  stgCurCfgBrgHelloTime INTEGER
  stgCurCfgBrgForwardDelay INTEGER
  stgCurCfgBrgMaxAge INTEGER
  stgCurCfgAgingTime INTEGER
  stgCurCfgVlanBmap OCTET STRING

StgNewCfgTableEntry  
SEQUENCE    
  stgNewCfgIndex Integer32
  stgNewCfgState INTEGER
  stgNewCfgDefaultCfg INTEGER
  stgNewCfgAddVlan Integer32
  stgNewCfgRemoveVlan Integer32
  stgNewCfgPriority INTEGER
  stgNewCfgBrgHelloTime INTEGER
  stgNewCfgBrgForwardDelay INTEGER
  stgNewCfgBrgMaxAge INTEGER
  stgNewCfgAgingTime INTEGER
  stgNewCfgVlanBmap OCTET STRING

StgCurCfgPortTableEntry  
SEQUENCE    
  stgCurCfgStgIndex Integer32
  stgCurCfgPortIndex Integer32
  stgCurCfgPortPriority INTEGER
  stgCurCfgPortPathCost Integer32
  stgCurCfgPortLink INTEGER
  stgCurCfgPortEdge INTEGER
  stgCurCfgPortState INTEGER

StgNewCfgPortTableEntry  
SEQUENCE    
  stgNewCfgStgIndex Integer32
  stgNewCfgPortIndex Integer32
  stgNewCfgPortPriority INTEGER
  stgNewCfgPortPathCost Integer32
  stgNewCfgPortLink INTEGER
  stgNewCfgPortEdge INTEGER
  stgNewCfgPortState INTEGER

PmCurCfgPortMonitorEntry  
SEQUENCE    
  pmCurCfgPmirrMoniPortIndex Integer32
  pmCurCfgPmirrMirrPortIndex Integer32
  pmCurCfgPmirrDirection INTEGER
  pmCurCfgPmirrPortVlansBmap OCTET STRING

PmNewCfgPortMonitorEntry  
SEQUENCE    
  pmNewCfgPmirrMoniPortIndex Integer32
  pmNewCfgPmirrMirrPortIndex Integer32
  pmNewCfgPmirrDirection INTEGER
  pmNewCfgPmirrDelete INTEGER
  pmNewCfgAddVlan Integer32
  pmNewCfgRemoveVlan Integer32
  pmNewCfgPmirrPortVlansBmap OCTET STRING

MstCistCurCfgPortTableEntry  
SEQUENCE    
  mstCistCurCfgPortIndex Integer32
  mstCistCurCfgPortPriority INTEGER
  mstCistCurCfgPortPathCost INTEGER
  mstCistCurCfgPortLinkType INTEGER
  mstCistCurCfgPortEdge INTEGER
  mstCistCurCfgPortStpState INTEGER
  mstCistCurCfgPortHelloTime INTEGER

MstCistNewCfgPortTableEntry  
SEQUENCE    
  mstCistNewCfgPortIndex Integer32
  mstCistNewCfgPortPriority INTEGER
  mstCistNewCfgPortPathCost INTEGER
  mstCistNewCfgPortLinkType INTEGER
  mstCistNewCfgPortEdge INTEGER
  mstCistNewCfgPortStpState INTEGER
  mstCistNewCfgPortHelloTime INTEGER

PortTeamCurCfgTableEntry  
SEQUENCE    
  portTeamCurCfgIndex Integer32
  portTeamCurCfgState INTEGER
  portTeamCurCfgPorts OCTET STRING
  portTeamCurCfgTrunks OCTET STRING
  portTeamCurCfgName DisplayString

PortTeamNewCfgTableEntry  
SEQUENCE    
  portTeamNewCfgIndex Integer32
  portTeamNewCfgState INTEGER
  portTeamNewCfgPorts OCTET STRING
  portTeamNewCfgAddPort Integer32
  portTeamNewCfgRemovePort Integer32
  portTeamNewCfgTrunks OCTET STRING
  portTeamNewCfgAddTrunk Integer32
  portTeamNewCfgRemoveTrunk Integer32
  portTeamNewCfgDelete INTEGER
  portTeamNewCfgName DisplayString

PortTeamInfoTableEntry  
SEQUENCE    
  portTeamInfoIndex Integer32
  portTeamInfoState INTEGER
  portTeamInfoPorts OCTET STRING
  portTeamInfoPortsState OCTET STRING
  portTeamInfoTrunks OCTET STRING
  portTeamInfoTrunksState OCTET STRING
  portTeamInfoMaster DisplayString

VadcVlanCurCfgTableEntry  
SEQUENCE    
  vadcVlanCurCfgVlanId Integer32
  vadcVlanCurCfgBwmCont Integer32
  vadcVlanCurCfgNonIp Integer32
  vadcVlanCurCfgIpv6LlaGen INTEGER
  vadcVlanCurCfgRouterAdv INTEGER
  vadcVlanCurCfgReTransInt Unsigned32
  vadcVlanCurCfgMinIntBwAdv INTEGER
  vadcVlanCurCfgMaxIntBwAdv INTEGER
  vadcVlanCurCfgMtu INTEGER
  vadcVlanCurCfgCurHopLimit INTEGER
  vadcVlanCurCfgMFlag INTEGER
  vadcVlanCurCfgOFlag INTEGER
  vadcVlanCurCfgRTime INTEGER
  vadcVlanCurCfgRlTime INTEGER
  vadcVlanCurCfgPlTime Unsigned32
  vadcVlanCurCfgVlTime Unsigned32
  vadcVlanCurCfgOpInfo INTEGER
  vadcVlanCurCfgApInfo INTEGER

VadcVlanNewCfgTableEntry  
SEQUENCE    
  vadcVlanNewCfgVlanId Integer32
  vadcVlanNewCfgBwmCont Integer32
  vadcVlanNewCfgNonIp Integer32
  vadcVlanNewCfgIpv6LlaGen INTEGER
  vadcVlanNewCfgRouterAdv INTEGER
  vadcVlanNewCfgReTransInt Unsigned32
  vadcVlanNewCfgMinIntBwAdv INTEGER
  vadcVlanNewCfgMaxIntBwAdv INTEGER
  vadcVlanNewCfgMtu INTEGER
  vadcVlanNewCfgCurHopLimit INTEGER
  vadcVlanNewCfgMFlag INTEGER
  vadcVlanNewCfgOFlag INTEGER
  vadcVlanNewCfgRTime INTEGER
  vadcVlanNewCfgRlTime INTEGER
  vadcVlanNewCfgPlTime Unsigned32
  vadcVlanNewCfgVlTime Unsigned32
  vadcVlanNewCfgOpInfo INTEGER
  vadcVlanNewCfgApInfo INTEGER

StgStatsPortTableEntry  
SEQUENCE    
  stgStatsStpIndex Integer32
  stgStatsPortIndex Integer32
  stgStatsPortRcvCfgBpdus Integer32
  stgStatsPortRcvTcnBpdus Integer32
  stgStatsPortXmtCfgBpdus Integer32
  stgStatsPortXmtTcnBpdus Integer32

FdbEntry  
SEQUENCE    
  fdbMacAddr PhysAddress
  fdbVlan Integer32
  fdbSrcPort Integer32
  fdbSrcTrunk Integer32
  fdbState INTEGER
  fdbRefSps DisplayString
  fdbLearnedPort Integer32

StpInfoTableEntry  
SEQUENCE    
  stpInfoIndex Integer32
  stpInfoTimeSinceTopChange TimeTicks
  stpInfoTopChanges Counter32
  stpInfoDesignatedRoot BridgeId
  stpInfoRootCost Integer32
  stpInfoRootPort Integer32
  stpInfoMaxAge Integer32
  stpInfoHelloTime Integer32
  stpInfoForwardDelay Integer32
  stpInfoHoldTime Integer32

StpInfoPortTableEntry  
SEQUENCE    
  stpInfoPortStpIndex Integer32
  stpInfoPortIndex Integer32
  stpInfoPortState INTEGER
  stpInfoPortDesignatedRoot BridgeId
  stpInfoPortDesignatedCost Integer32
  stpInfoPortDesignatedBridge BridgeId
  stpInfoPortDesignatedPort OCTET STRING
  stpInfoPortForwardTransitions Counter32
  stpInfoPortRole INTEGER
  stpInfoPortLinkType INTEGER
  stpInfoPortEdge INTEGER
  stpInfoPortPathCost Integer32

LacpInfoPortTableEntry  
SEQUENCE    
  lacpInfoPortIndex Integer32
  lacpInfoPortSelected INTEGER
  lacpInfoPortNtt INTEGER
  lacpInfoPortReadyN INTEGER
  lacpInfoPortMoved INTEGER

CistInfoPortTableEntry  
SEQUENCE    
  cistInfoPortIndex Integer32
  cistInfoPortPriority Integer32
  cistInfoPortPathCost Integer32
  cistInfoPortState INTEGER
  cistInfoPortRole INTEGER
  cistInfoPortDesignatedBridge BridgeId
  cistInfoPortDesignatedPort OCTET STRING
  cistInfoPortLinkType INTEGER

VlanInfoTableEntry  
SEQUENCE    
  vlanInfoId INTEGER
  vlanInfoName DisplayString
  vlanInfoStatus INTEGER
  vlanInfoJumbo INTEGER
  vlanInfoBwmContract Integer32
  vlanInfoLearn INTEGER
  vlanInfoPorts OCTET STRING

VlanInfoTableVADCEntry  
SEQUENCE    
  vlanInfoIdx INTEGER
  vlanInfoVADC DisplayString

Defined Values

layer2 1.3.6.1.4.1.1872.2.5.2
The MIB module for the Alteon OS Layer2 configuration, statistics and information .
MODULE-IDENTITY    

layer2Configs 1.3.6.1.4.1.1872.2.5.2.1
OBJECT IDENTIFIER    

layer2Stats 1.3.6.1.4.1.1872.2.5.2.2
OBJECT IDENTIFIER    

layer2Info 1.3.6.1.4.1.1872.2.5.2.3
OBJECT IDENTIFIER    

layer2Oper 1.3.6.1.4.1.1872.2.5.2.4
OBJECT IDENTIFIER    

vlan 1.3.6.1.4.1.1872.2.5.2.1.1
OBJECT IDENTIFIER    

trunkgroup 1.3.6.1.4.1.1872.2.5.2.1.2
OBJECT IDENTIFIER    

stgCfg 1.3.6.1.4.1.1872.2.5.2.1.3
OBJECT IDENTIFIER    

mirroring 1.3.6.1.4.1.1872.2.5.2.1.4
OBJECT IDENTIFIER    

lacp 1.3.6.1.4.1.1872.2.5.2.1.5
OBJECT IDENTIFIER    

mstCfg 1.3.6.1.4.1.1872.2.5.2.1.7
OBJECT IDENTIFIER    

portTeamCfg 1.3.6.1.4.1.1872.2.5.2.1.9
OBJECT IDENTIFIER    

mirrPortMirr 1.3.6.1.4.1.1872.2.5.2.1.4.1
OBJECT IDENTIFIER    

mstGeneralCfg 1.3.6.1.4.1.1872.2.5.2.1.7.1
OBJECT IDENTIFIER    

mstCistCfg 1.3.6.1.4.1.1872.2.5.2.1.7.2
OBJECT IDENTIFIER    

vadcVlan 1.3.6.1.4.1.1872.2.5.2.1.10
OBJECT IDENTIFIER    

fdbStats 1.3.6.1.4.1.1872.2.5.2.2.1
OBJECT IDENTIFIER    

stpStats 1.3.6.1.4.1.1872.2.5.2.2.2
OBJECT IDENTIFIER    

fdbInfo 1.3.6.1.4.1.1872.2.5.2.3.1
OBJECT IDENTIFIER    

stpInfo 1.3.6.1.4.1.1872.2.5.2.3.2
OBJECT IDENTIFIER    

lacpInfo 1.3.6.1.4.1.1872.2.5.2.3.3
OBJECT IDENTIFIER    

cistInfo 1.3.6.1.4.1.1872.2.5.2.3.4
OBJECT IDENTIFIER    

vlanInfo 1.3.6.1.4.1.1872.2.5.2.3.5
OBJECT IDENTIFIER    

cistGeneralInfo 1.3.6.1.4.1.1872.2.5.2.3.4.1
OBJECT IDENTIFIER    

portTeamInfo 1.3.6.1.4.1.1872.2.5.2.3.6
OBJECT IDENTIFIER    

vlanMaxEnt 1.3.6.1.4.1.1872.2.5.2.1.1.1
The maximum number of rows in the VLAN configuration table.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

vlanMaxVlanID 1.3.6.1.4.1.1872.2.5.2.1.1.4
The maximum allowed VLAN ID.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

vlanCurCfgTable 1.3.6.1.4.1.1872.2.5.2.1.1.2
The table of VLAN configuration.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VlanCurCfgTableEntry

vlanCurCfgTableEntry 1.3.6.1.4.1.1872.2.5.2.1.1.2.1
A row in the VLAN configuration table.
Status: current Access: not-accessible
OBJECT-TYPE    
  VlanCurCfgTableEntry  

vlanCurCfgVlanId 1.3.6.1.4.1.1872.2.5.2.1.1.2.1.1
The VLAN identifier.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

vlanCurCfgVlanName 1.3.6.1.4.1.1872.2.5.2.1.1.2.1.2
The VLAN name.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

vlanCurCfgPorts 1.3.6.1.4.1.1872.2.5.2.1.1.2.1.3
The port list in the VLAN. The ports are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ port 8 || || || ||___ port 7 || |____ port 6 || . . . ||_________ port 1 |__________ reserved where x : 1 - The represented port belongs to the VLAN 0 - The represented port does not belong to the VLAN
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

vlanCurCfgState 1.3.6.1.4.1.1872.2.5.2.1.1.2.1.4
Enable or disable a VLAN
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(2), disabled(3)  

vlanCurCfgBwmContract 1.3.6.1.4.1.1872.2.5.2.1.1.2.1.5
Default contract number the VLAN
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

vlanCurCfgStg 1.3.6.1.4.1.1872.2.5.2.1.1.2.1.6
The Spanning Tree Group for the VLAN.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

vlanCurCfgJumbo 1.3.6.1.4.1.1872.2.5.2.1.1.2.1.7
Enable or disable Jumbo frames on a VLAN
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(2), disabled(3)  

vlanCurCfgLearn 1.3.6.1.4.1.1872.2.5.2.1.1.2.1.8
Enable or disable source MAC address learning on a VLAN
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(2), disabled(3)  

vlanCurCfgShared 1.3.6.1.4.1.1872.2.5.2.1.1.2.1.9
Enable or disable shared property of a VLAN
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(2), disabled(3)  

vlanCurCfgIpv6LlaGen 1.3.6.1.4.1.1872.2.5.2.1.1.2.1.10
Enable/disable IPv6 Link Local Address Generation.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(2), disabled(3)  

vlanCurCfgRouterAdv 1.3.6.1.4.1.1872.2.5.2.1.1.2.1.11
Enable/disable router advertisement.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(2), disabled(3)  

vlanCurCfgReTransInt 1.3.6.1.4.1.1872.2.5.2.1.1.2.1.12
Retransmission interval.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

vlanCurCfgMinIntBwAdv 1.3.6.1.4.1.1872.2.5.2.1.1.2.1.13
Minimum interval between router advertisements.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 3..1800  

vlanCurCfgMaxIntBwAdv 1.3.6.1.4.1.1872.2.5.2.1.1.2.1.14
Maximum interval between router advertisements.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 4..1800  

vlanCurCfgMtu 1.3.6.1.4.1.1872.2.5.2.1.1.2.1.15
Maximum Transmission Unit. Enter 0 for None.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1200..1500  

vlanCurCfgCurHopLimit 1.3.6.1.4.1.1872.2.5.2.1.1.2.1.16
Current hop limit field.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

vlanCurCfgMFlag 1.3.6.1.4.1.1872.2.5.2.1.1.2.1.17
Enable / Disable Managed address configuration flag.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(2), disabled(3)  

vlanCurCfgOFlag 1.3.6.1.4.1.1872.2.5.2.1.1.2.1.18
Enable / Disable Other address configuration flag.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(2), disabled(3)  

vlanCurCfgRTime 1.3.6.1.4.1.1872.2.5.2.1.1.2.1.19
Reachable time.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..3600000  

vlanCurCfgRlTime 1.3.6.1.4.1.1872.2.5.2.1.1.2.1.20
Life Time.Enter 0 for None
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..9000  

vlanCurCfgPlTime 1.3.6.1.4.1.1872.2.5.2.1.1.2.1.21
Preferred life time.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

vlanCurCfgVlTime 1.3.6.1.4.1.1872.2.5.2.1.1.2.1.22
Valid life time.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

vlanCurCfgOpInfo 1.3.6.1.4.1.1872.2.5.2.1.1.2.1.23
Enable / Disable On-link flag in prefix.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(2), disabled(3)  

vlanCurCfgApInfo 1.3.6.1.4.1.1872.2.5.2.1.1.2.1.24
Enable / Disable Autonomous address configuration flag in prefix.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(2), disabled(3)  

vlanNewCfgTable 1.3.6.1.4.1.1872.2.5.2.1.1.3
The table of VLAN configuration.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VlanNewCfgTableEntry

vlanNewCfgTableEntry 1.3.6.1.4.1.1872.2.5.2.1.1.3.1
A row in the VLAN configuration table.
Status: current Access: not-accessible
OBJECT-TYPE    
  VlanNewCfgTableEntry  

vlanNewCfgVlanId 1.3.6.1.4.1.1872.2.5.2.1.1.3.1.1
The VLAN identifier.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

vlanNewCfgVlanName 1.3.6.1.4.1.1872.2.5.2.1.1.3.1.2
The VLAN name.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..32)  

vlanNewCfgPorts 1.3.6.1.4.1.1872.2.5.2.1.1.3.1.3
The port list in the VLAN. The ports are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ port 8 || || || ||___ port 7 || |____ port 6 || . . . ||_________ port 1 |__________ reserved where x : 1 - The represented port belongs to the VLAN 0 - The represented port does not belong to the VLAN
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

vlanNewCfgState 1.3.6.1.4.1.1872.2.5.2.1.1.3.1.4
Enable or disable a VLAN
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(2), disabled(3)  

vlanNewCfgAddPort 1.3.6.1.4.1.1872.2.5.2.1.1.3.1.5
The port to be added to the specified VLAN. A '0' value is returned when read.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

vlanNewCfgRemovePort 1.3.6.1.4.1.1872.2.5.2.1.1.3.1.6
The port to be removed from the specified VLAN. A '0' value is returned when read.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

vlanNewCfgDelete 1.3.6.1.4.1.1872.2.5.2.1.1.3.1.7
This is an action object to create or delete a VLAN. other(1) is returned always when read. The following values are writable: delete(2)...to delete a VLAN
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER other(1), delete(2)  

vlanNewCfgBwmContract 1.3.6.1.4.1.1872.2.5.2.1.1.3.1.8
Default contract number for the VLAN.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

vlanNewCfgStg 1.3.6.1.4.1.1872.2.5.2.1.1.3.1.9
The Spanning Tree Group for the VLAN.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

vlanNewCfgJumbo 1.3.6.1.4.1.1872.2.5.2.1.1.3.1.10
Enable or disable Jumbo frames on a VLAN
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(2), disabled(3)  

vlanNewCfgLearn 1.3.6.1.4.1.1872.2.5.2.1.1.3.1.11
Enable or disable source mac address learning on a VLAN
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(2), disabled(3)  

vlanNewCfgShared 1.3.6.1.4.1.1872.2.5.2.1.1.3.1.12
Enable or disable shared property of a VLAN
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(2), disabled(3)  

vlanNewCfgIpv6LlaGen 1.3.6.1.4.1.1872.2.5.2.1.1.3.1.13
Enable/disable IPv6 Link Local Address Generation.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(2), disabled(3)  

vlanNewCfgRouterAdv 1.3.6.1.4.1.1872.2.5.2.1.1.3.1.14
Enable/disable router advertisement.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(2), disabled(3)  

vlanNewCfgReTransInt 1.3.6.1.4.1.1872.2.5.2.1.1.3.1.15
Retransmission interval.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..4294967295  

vlanNewCfgMinIntBwAdv 1.3.6.1.4.1.1872.2.5.2.1.1.3.1.16
Minimum interval between router advertisements.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 3..1800  

vlanNewCfgMaxIntBwAdv 1.3.6.1.4.1.1872.2.5.2.1.1.3.1.17
Maximum interval between router advertisements.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 4..1800  

vlanNewCfgMtu 1.3.6.1.4.1.1872.2.5.2.1.1.3.1.18
Maximum Transmission Unit. Enter 0 for None.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1200..1500  

vlanNewCfgCurHopLimit 1.3.6.1.4.1.1872.2.5.2.1.1.3.1.19
Current hop limit field.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..255  

vlanNewCfgMFlag 1.3.6.1.4.1.1872.2.5.2.1.1.3.1.20
Enable / Disable Managed address configuration flag.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(2), disabled(3)  

vlanNewCfgOFlag 1.3.6.1.4.1.1872.2.5.2.1.1.3.1.21
Enable / Disable Other address configuration flag.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(2), disabled(3)  

vlanNewCfgRTime 1.3.6.1.4.1.1872.2.5.2.1.1.3.1.22
Reachable time.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..3600000  

vlanNewCfgRlTime 1.3.6.1.4.1.1872.2.5.2.1.1.3.1.23
Life Time.Enter 0 for None
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..9000  

vlanNewCfgPlTime 1.3.6.1.4.1.1872.2.5.2.1.1.3.1.24
Preferred life time.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..4294967295  

vlanNewCfgVlTime 1.3.6.1.4.1.1872.2.5.2.1.1.3.1.25
Valid life time.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..4294967295  

vlanNewCfgOpInfo 1.3.6.1.4.1.1872.2.5.2.1.1.3.1.26
Enable / Disable On-link flag in prefix.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(2), disabled(3)  

vlanNewCfgApInfo 1.3.6.1.4.1.1872.2.5.2.1.1.3.1.27
Enable / Disable Autonomous address configuration flag in prefix.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(2), disabled(3)  

lacpCurSystemPriority 1.3.6.1.4.1.1872.2.5.2.1.5.1
A 2-octet read-write value indicating the priority value associated with the Actor's System ID.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

lacpNewSystemPriority 1.3.6.1.4.1.1872.2.5.2.1.5.2
A 2-octet read-write value indicating the priority value associated with the Actor's System ID.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..65535  

lacpCurSystemTimeoutTime 1.3.6.1.4.1.1872.2.5.2.1.5.5
If a port does not receive LACPDUs for Timeout time LACP information pertaining to the port is invalidated. Its every 3 sec (short) and every 90 sec (long 3).
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER short(3), long(90)  

lacpNewSystemTimeoutTime 1.3.6.1.4.1.1872.2.5.2.1.5.6
If a port does not receive LACPDUs for Timeout time LACP information pertaining to the port is invalidated. Its every 3 sec (short) and every 90 sec (long 3).
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER short(3), long(90)  

lacpCurPortCfgTable 1.3.6.1.4.1.1872.2.5.2.1.5.7
The table of LACP port configuration.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    LacpCurPortCfgTableEntry

lacpCurPortCfgTableEntry 1.3.6.1.4.1.1872.2.5.2.1.5.7.1
A row in the LACP port configuration table.
Status: current Access: not-accessible
OBJECT-TYPE    
  LacpCurPortCfgTableEntry  

lacpCurPortCfgTableId 1.3.6.1.4.1.1872.2.5.2.1.5.7.1.1
LACP port number.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

lacpCurPortState 1.3.6.1.4.1.1872.2.5.2.1.5.7.1.2
LACP port state can be one of three states off (Not participating in LACP) Active (Initiates LACPDU updates) Passive (Does not initiate LACPDU updates but responds to peer.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER off(1), active(2), passive(3)  

lacpCurPortActorPortPriority 1.3.6.1.4.1.1872.2.5.2.1.5.7.1.3
The priority value assigned to this Aggregation Port. This 16-bit value is read-only.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

lacpCurPortActorAdminKey 1.3.6.1.4.1.1872.2.5.2.1.5.7.1.4
The current administrative value of the Key for the Aggregation Port. This is a 16-bit read-only value. The meaning of particular Key values is of local significance.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

lacpNewPortCfgTable 1.3.6.1.4.1.1872.2.5.2.1.5.8
The table of LACP port configuration.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    LacpNewPortCfgTableEntry

lacpNewPortCfgTableEntry 1.3.6.1.4.1.1872.2.5.2.1.5.8.1
A row in the LACP port configuration table.
Status: current Access: not-accessible
OBJECT-TYPE    
  LacpNewPortCfgTableEntry  

lacpNewPortCfgTableId 1.3.6.1.4.1.1872.2.5.2.1.5.8.1.1
LACP port number.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

lacpNewPortState 1.3.6.1.4.1.1872.2.5.2.1.5.8.1.2
LACP port state can be one of three states off (Not participating in LACP) Active (Initiates LACPDU updates) Passive (Does not initiate LACPDU updates but responds to peer.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER off(1), active(2), passive(3)  

lacpNewPortActorPortPriority 1.3.6.1.4.1.1872.2.5.2.1.5.8.1.3
The priority value assigned to this Aggregation Port. This 16-bit value is read-write.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..65535  

lacpNewPortActorAdminKey 1.3.6.1.4.1.1872.2.5.2.1.5.8.1.4
The current administrative value of the Key for the Aggregation Port. This is a 16-bit read-write value. The meaning of particular Key values is of local significance.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..65535  

lacpCurSystemName 1.3.6.1.4.1.1872.2.5.2.1.5.9
LACP System Name
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..31)  

lacpNewSystemName 1.3.6.1.4.1.1872.2.5.2.1.5.10
LACP System Name
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..31)  

trunkGroupTableMaxSize 1.3.6.1.4.1.1872.2.5.2.1.2.1
The maximum number of entries in trunk group table.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

trunkGroupCurCfgTable 1.3.6.1.4.1.1872.2.5.2.1.2.2
The table of trunk group configuration.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TrunkGroupCurCfgTableEntry

trunkGroupCurCfgTableEntry 1.3.6.1.4.1.1872.2.5.2.1.2.2.1
A row in the trunk group configuration table.
Status: current Access: not-accessible
OBJECT-TYPE    
  TrunkGroupCurCfgTableEntry  

trunkGroupCurCfgIndex 1.3.6.1.4.1.1872.2.5.2.1.2.2.1.1
The identifier of the trunk group.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

trunkGroupCurCfgPorts 1.3.6.1.4.1.1872.2.5.2.1.2.2.1.2
The port list in the trunk group. The ports are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ port 8 || || || ||___ port 7 || |____ port 6 || . . . ||_________ port 1 |__________ reserved where x : 1 - The represented port belongs to the trunk group 0 - The represented port does not belong to the trunk group
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

trunkGroupCurCfgState 1.3.6.1.4.1.1872.2.5.2.1.2.2.1.3
Enable or disable a trunk group.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

trunkGroupCurCfgBwmContract 1.3.6.1.4.1.1872.2.5.2.1.2.2.1.4
Default BW contract of a trunk group.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

trunkGroupCurCfgName 1.3.6.1.4.1.1872.2.5.2.1.2.2.1.6
Name of a trunk group.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..31)  

trunkGroupNewCfgTable 1.3.6.1.4.1.1872.2.5.2.1.2.3
The table of trunk group configuration.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TrunkGroupNewCfgTableEntry

trunkGroupNewCfgTableEntry 1.3.6.1.4.1.1872.2.5.2.1.2.3.1
A row in the trunk group configuration table.
Status: current Access: not-accessible
OBJECT-TYPE    
  TrunkGroupNewCfgTableEntry  

trunkGroupNewCfgIndex 1.3.6.1.4.1.1872.2.5.2.1.2.3.1.1
The identifier of the trunk group.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

trunkGroupNewCfgPorts 1.3.6.1.4.1.1872.2.5.2.1.2.3.1.2
The port list in the trunk group. The ports are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ port 8 || || || ||___ port 7 || |____ port 6 || . . . ||_________ port 1 |__________ reserved where x : 1 - The represented port belongs to the trunk group 0 - The represented port does not belong to the trunk group
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

trunkGroupNewCfgAddPort 1.3.6.1.4.1.1872.2.5.2.1.2.3.1.3
The port to be added in the trunk group. When read, 0 is returned.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

trunkGroupNewCfgRemovePort 1.3.6.1.4.1.1872.2.5.2.1.2.3.1.4
The port to be deleted from the trunk group. when read, 0 is returned.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

trunkGroupNewCfgState 1.3.6.1.4.1.1872.2.5.2.1.2.3.1.5
Enable or disable a trunk group.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

trunkGroupNewCfgDelete 1.3.6.1.4.1.1872.2.5.2.1.2.3.1.6
Setting the value to delete(2) will delete the entire row. When read, other(1) is returned.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER other(1), delete(2)  

trunkGroupNewCfgBwmContract 1.3.6.1.4.1.1872.2.5.2.1.2.3.1.7
Default BW contract of a trunk group.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

trunkGroupNewCfgName 1.3.6.1.4.1.1872.2.5.2.1.2.3.1.9
Name of a trunk group.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..31)  

stgCurCfgTable 1.3.6.1.4.1.1872.2.5.2.1.3.1
The table of Spanning Tree Group configuration.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    StgCurCfgTableEntry

stgCurCfgTableEntry 1.3.6.1.4.1.1872.2.5.2.1.3.1.1
Information about a particular Spanning Tree Group configuration.
Status: current Access: not-accessible
OBJECT-TYPE    
  StgCurCfgTableEntry  

stgCurCfgIndex 1.3.6.1.4.1.1872.2.5.2.1.3.1.1.1
The identifier of a particular Spanning Tree Group. This is also index to the entLogicalTable of Entity MIB.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

stgCurCfgState 1.3.6.1.4.1.1872.2.5.2.1.3.1.1.2
Turn on of off Spanning Tree operation of a particular Spanning Tree Group.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER on(1), off(2)  

stgCurCfgPriority 1.3.6.1.4.1.1872.2.5.2.1.3.1.1.5
The value of the write-able portion of the Bridge ID, i.e., the first two octets of the (8 octet long) Bridge ID.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

stgCurCfgBrgHelloTime 1.3.6.1.4.1.1872.2.5.2.1.3.1.1.6
The value in seconds that all bridges use for HelloTime when this bridge is acting as the root.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..10  

stgCurCfgBrgForwardDelay 1.3.6.1.4.1.1872.2.5.2.1.3.1.1.7
The value in seconds that all bridges use for ForwardDelay when this bridge is acting as the root.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 4..30  

stgCurCfgBrgMaxAge 1.3.6.1.4.1.1872.2.5.2.1.3.1.1.8
The value in seconds that all bridges use for MaxAge when this bridge is acting as the root.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 6..40  

stgCurCfgAgingTime 1.3.6.1.4.1.1872.2.5.2.1.3.1.1.9
The timeout period in seconds for aging out dynamically learned forwarding information.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

stgCurCfgVlanBmap 1.3.6.1.4.1.1872.2.5.2.1.3.1.1.10
The vlans applied to the spanning tree group. The vlans are presented in bitmap format. This string displays vlan number from 1 to 4096. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ vlan 9 || || || ||___ vlan 8 || |____ vlan 7 || . . . ||_________ vlan 2 |__________ vlan 1 (as index to stgCurCfgTable) where x : 1 - The represented vlan applied to the spanning tree. 0 - The represented vlan not applied to the spanning tree
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..512)  

stgNewCfgTable 1.3.6.1.4.1.1872.2.5.2.1.3.2
The table of Spanning Tree Groups configuration in the new_config.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    StgNewCfgTableEntry

stgNewCfgTableEntry 1.3.6.1.4.1.1872.2.5.2.1.3.2.1
Information about a particular Spanning Tree Group configuration.
Status: current Access: not-accessible
OBJECT-TYPE    
  StgNewCfgTableEntry  

stgNewCfgIndex 1.3.6.1.4.1.1872.2.5.2.1.3.2.1.1
The identifier of a particular Spanning Tree Group. This is also index to the entLogicalTable of Entity MIB.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

stgNewCfgState 1.3.6.1.4.1.1872.2.5.2.1.3.2.1.2
Turn on of off Spanning Tree operation of a particular Spanning Tree Group.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER on(1), off(2)  

stgNewCfgDefaultCfg 1.3.6.1.4.1.1872.2.5.2.1.3.2.1.3
Setting the value to default-config(1) will set the default configuration as recommended by IEEE 802.1D for a particular Spanning Tree Group. default-config (1) is always returned When read, but it does not mean anything.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER default-config(1)  

stgNewCfgAddVlan 1.3.6.1.4.1.1872.2.5.2.1.3.2.1.4
The vlan to be added to the specified Spanning Tree Group. A '0' value is returned when read.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

stgNewCfgRemoveVlan 1.3.6.1.4.1.1872.2.5.2.1.3.2.1.5
The vlan to be removed from the specified Spanning Tree Group. A '0' value is returned when read.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

stgNewCfgPriority 1.3.6.1.4.1.1872.2.5.2.1.3.2.1.8
The value of the write-able portion of the Bridge ID, i.e., the first two octets of the (8 octet long) Bridge ID.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

stgNewCfgBrgHelloTime 1.3.6.1.4.1.1872.2.5.2.1.3.2.1.9
The value in seconds that all bridges use for HelloTime when this bridge is acting as the root.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..10  

stgNewCfgBrgForwardDelay 1.3.6.1.4.1.1872.2.5.2.1.3.2.1.10
The value in seconds that all bridges use for ForwardDelay when this bridge is acting as the root.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 4..30  

stgNewCfgBrgMaxAge 1.3.6.1.4.1.1872.2.5.2.1.3.2.1.11
The value in seconds that all bridges use for MaxAge when this bridge is acting as the root.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 6..40  

stgNewCfgAgingTime 1.3.6.1.4.1.1872.2.5.2.1.3.2.1.12
The timeout period in seconds for aging out dynamically learned forwarding information.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

stgNewCfgVlanBmap 1.3.6.1.4.1.1872.2.5.2.1.3.2.1.13
The vlans applied to the spanning tree group. The vlans are presented in bitmap format. This string displays vlan number from 1 to 4096. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ vlan 9 || || || ||___ vlan 8 || |____ vlan 7 || . . . ||_________ vlan 2 |__________ vlan 1 (as index to stgCurCfgTable) where x : 1 - The represented vlan applied to the spanning tree. 0 - The represented vlan not applied to the spanning tree
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..512)  

stgCurCfgPortTable 1.3.6.1.4.1.1872.2.5.2.1.3.3
The table of Spanning Tree Group port configuration in the current_config.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    StgCurCfgPortTableEntry

stgCurCfgPortTableEntry 1.3.6.1.4.1.1872.2.5.2.1.3.3.1
Information about port configuration of a particular Spanning Tree Group.
Status: current Access: not-accessible
OBJECT-TYPE    
  StgCurCfgPortTableEntry  

stgCurCfgStgIndex 1.3.6.1.4.1.1872.2.5.2.1.3.3.1.1
The identifier of a particular Spanning Tree Group. This is also index to the entLogicalTable of Entity MIB.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

stgCurCfgPortIndex 1.3.6.1.4.1.1872.2.5.2.1.3.3.1.2
The port identifier of a particular Spanning Tree Group.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

stgCurCfgPortState 1.3.6.1.4.1.1872.2.5.2.1.3.3.1.3
Turn on of off Spanning Tree operation of a particular port of a Spanning Tree Group.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER on(1), off(2)  

stgCurCfgPortPriority 1.3.6.1.4.1.1872.2.5.2.1.3.3.1.4
The value of the priority field which is contained in the first (in network byte order) octet of the (2 octet long) Port ID.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

stgCurCfgPortPathCost 1.3.6.1.4.1.1872.2.5.2.1.3.3.1.5
The contribution of this port to the path cost of paths towards the spanning tree root which include this port (if MSTP/RSTP is enabled range is (0..200000000) else range is (0..65535) ).
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  


stgCurCfgPortEdge 1.3.6.1.4.1.1872.2.5.2.1.3.3.1.7
The state of port edge.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

stgNewCfgPortTable 1.3.6.1.4.1.1872.2.5.2.1.3.4
The table of Spanning Tree Group port configuration in the new_config.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    StgNewCfgPortTableEntry

stgNewCfgPortTableEntry 1.3.6.1.4.1.1872.2.5.2.1.3.4.1
Information about port configuration of a particular Spanning Tree Group.
Status: current Access: not-accessible
OBJECT-TYPE    
  StgNewCfgPortTableEntry  

stgNewCfgStgIndex 1.3.6.1.4.1.1872.2.5.2.1.3.4.1.1
The identifier of a particular Spanning Tree Group. This is also index to the entLogicalTable of Entity MIB.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

stgNewCfgPortIndex 1.3.6.1.4.1.1872.2.5.2.1.3.4.1.2
The port identifier of a particular Spanning Tree Group.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

stgNewCfgPortState 1.3.6.1.4.1.1872.2.5.2.1.3.4.1.3
Turn on of off Spanning Tree operation of a particular port of a Spanning Tree Group.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER on(1), off(2)  

stgNewCfgPortPriority 1.3.6.1.4.1.1872.2.5.2.1.3.4.1.4
The value of the priority field which is contained in the first (in network byte order) octet of the (2 octet long) Port ID.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..255  

stgNewCfgPortPathCost 1.3.6.1.4.1.1872.2.5.2.1.3.4.1.5
The contribution of this port to the path cost of paths towards the spanning tree root which include this port (if MSTP/RSTP is enabled range is (0..200000000) else range is (0..65535) ).
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  


stgNewCfgPortEdge 1.3.6.1.4.1.1872.2.5.2.1.3.4.1.7
The state of port edge.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

pmCurCfgPortMirrState 1.3.6.1.4.1.1872.2.5.2.1.4.1.1
The state of port-based port mirroring.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

pmNewCfgPortMirrState 1.3.6.1.4.1.1872.2.5.2.1.4.1.2
The state of port-based port mirroring.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

pmCurCfgPortMonitorTable 1.3.6.1.4.1.1872.2.5.2.1.4.1.3
The table of monitoring ports.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PmCurCfgPortMonitorEntry

pmCurCfgPortMonitorEntry 1.3.6.1.4.1.1872.2.5.2.1.4.1.3.1
A row in the monitoring port table.
Status: current Access: not-accessible
OBJECT-TYPE    
  PmCurCfgPortMonitorEntry  

pmCurCfgPmirrMoniPortIndex 1.3.6.1.4.1.1872.2.5.2.1.4.1.3.1.1
The monitoring port number.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pmCurCfgPmirrMirrPortIndex 1.3.6.1.4.1.1872.2.5.2.1.4.1.3.1.2
The mirrored port number
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pmCurCfgPmirrDirection 1.3.6.1.4.1.1872.2.5.2.1.4.1.3.1.3
The type of traffic to be monitored with respect to the mirrored port.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER in(1), out(2), both(3)  

pmCurCfgPmirrPortVlansBmap 1.3.6.1.4.1.1872.2.5.2.1.4.1.3.1.6
The mirrored VLANs (1-4096) list for the port. The VLANs are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ vlan 9 || || || ||___ vlan 8 || |____ vlan 7 || . . . ||_________ vlan 2 |__________ vlan 1 where x : 1 - The represented VLAN is being mirrored. 0 - The represented VLAN is not being mirrored. Note: When all octets are zero - all vlan(s) traffic is being for the port
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

pmNewCfgPortMonitorTable 1.3.6.1.4.1.1872.2.5.2.1.4.1.4
The table of monitoring ports.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PmNewCfgPortMonitorEntry

pmNewCfgPortMonitorEntry 1.3.6.1.4.1.1872.2.5.2.1.4.1.4.1
A row in the monitoring port table.
Status: current Access: not-accessible
OBJECT-TYPE    
  PmNewCfgPortMonitorEntry  

pmNewCfgPmirrMoniPortIndex 1.3.6.1.4.1.1872.2.5.2.1.4.1.4.1.1
The monitoring port number.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pmNewCfgPmirrMirrPortIndex 1.3.6.1.4.1.1872.2.5.2.1.4.1.4.1.2
The mirrored port number
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

pmNewCfgPmirrDirection 1.3.6.1.4.1.1872.2.5.2.1.4.1.4.1.3
The type of traffic to be monitored with respect to the mirrored port.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER in(1), out(2), both(3)  

pmNewCfgPmirrDelete 1.3.6.1.4.1.1872.2.5.2.1.4.1.4.1.4
Setting the value to delete(2) will delete the entire row. When read, other(1) is returned.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER other(1), delete(2)  

pmNewCfgAddVlan 1.3.6.1.4.1.1872.2.5.2.1.4.1.4.1.7
The VLAN whose traffic is to be mirrored for this port. A '0' value is returned when read.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

pmNewCfgRemoveVlan 1.3.6.1.4.1.1872.2.5.2.1.4.1.4.1.8
The VLAN whose traffic will no longer to be mirrored. A '0' value is returned when read.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

pmNewCfgPmirrPortVlansBmap 1.3.6.1.4.1.1872.2.5.2.1.4.1.4.1.9
The mirrored VLANs(1-4096) list for the port. The VLANs are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ vlan 9 || || || ||___ vlan 8 || |____ vlan 7 || . . . ||_________ vlan 2 |__________ vlan 1 where x : 1 - The represented VLAN is being mirrored. 0 - The represented VLAN is not being mirrored. Note: All octets are zero means all vlan(s) traffic is being mirrored for the port
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

mstCurCfgState 1.3.6.1.4.1.1872.2.5.2.1.7.1.1
Enable or disable MSTP/RSTP
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(2), disabled(3)  

mstNewCfgState 1.3.6.1.4.1.1872.2.5.2.1.7.1.2
Enable or disable MSTP/RSTP
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(2), disabled(3)  

mstCurCfgRegionName 1.3.6.1.4.1.1872.2.5.2.1.7.1.3
The Name for the Region's configuration.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

mstNewCfgRegionName 1.3.6.1.4.1.1872.2.5.2.1.7.1.4
The Name for the Region's configuration.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..32)  

mstCurCfgRegionVersion 1.3.6.1.4.1.1872.2.5.2.1.7.1.5
Version of the MST Region.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

mstNewCfgRegionVersion 1.3.6.1.4.1.1872.2.5.2.1.7.1.6
Version of the MST Region.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

mstCurCfgMaxHopCount 1.3.6.1.4.1.1872.2.5.2.1.7.1.7
Indicates the maximum hop count value.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 4..60  

mstNewCfgMaxHopCount 1.3.6.1.4.1.1872.2.5.2.1.7.1.8
Indicates the maximum hop count value.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 4..60  

mstCurCfgStpMode 1.3.6.1.4.1.1872.2.5.2.1.7.1.9
The version of Spanning Tree Protocal the bridge is currently running.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER mstp(1), rstp(2)  

mstNewCfgStpMode 1.3.6.1.4.1.1872.2.5.2.1.7.1.10
The version of Spanning Tree Protocal the bridge is currently running.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER mstp(1), rstp(2)  

mstCistDefaultCfg 1.3.6.1.4.1.1872.2.5.2.1.7.2.1
Setting the value to default(1) will set the Multiple Spanning Tree and member parameters to default. default(1) is always returned when read, but it does not mean anything.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER default(1)  

mstCistBridgeCfg 1.3.6.1.4.1.1872.2.5.2.1.7.2.2
OBJECT IDENTIFIER    

mstCistCurCfgBridgePriority 1.3.6.1.4.1.1872.2.5.2.1.7.2.2.1
The value of the writable portion of the Brigde Identifier comprising of the first two octets.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

mstCistNewCfgBridgePriority 1.3.6.1.4.1.1872.2.5.2.1.7.2.2.2
The value of the writable portion of the Brigde Identifier comprising of the first two octets.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

mstCistCurCfgBridgeMaxAge 1.3.6.1.4.1.1872.2.5.2.1.7.2.2.5
The value in seconds that all bridges use for MaxAge when this bridge is acting as the root.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 6..40  

mstCistNewCfgBridgeMaxAge 1.3.6.1.4.1.1872.2.5.2.1.7.2.2.6
The value in seconds that all bridges use for MaxAge when this bridge is acting as the root.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 6..40  

mstCistCurCfgBridgeForwardDelay 1.3.6.1.4.1.1872.2.5.2.1.7.2.2.7
The value in seconds that all bridges use for ForwardDelay when this bridge is acting as the root.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 4..30  

mstCistNewCfgBridgeForwardDelay 1.3.6.1.4.1.1872.2.5.2.1.7.2.2.8
The value in seconds that all bridges use for ForwardDelay when this bridge is acting as the root.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 4..30  

mstCistCurCfgPortTable 1.3.6.1.4.1.1872.2.5.2.1.7.2.3
The table of CIST Port configuration.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MstCistCurCfgPortTableEntry

mstCistCurCfgPortTableEntry 1.3.6.1.4.1.1872.2.5.2.1.7.2.3.1
Information about a particular CIST Port configuration.
Status: current Access: not-accessible
OBJECT-TYPE    
  MstCistCurCfgPortTableEntry  

mstCistCurCfgPortIndex 1.3.6.1.4.1.1872.2.5.2.1.7.2.3.1.1
The port number of the port for which this entry contains spanning tree configuration.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

mstCistCurCfgPortPriority 1.3.6.1.4.1.1872.2.5.2.1.7.2.3.1.2
The four most significant bits of the Port Identifier of the Spanning Tree instance can be modified by setting this value.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..240  

mstCistCurCfgPortPathCost 1.3.6.1.4.1.1872.2.5.2.1.7.2.3.1.3
The contribution of this port to the path cost of paths towards the CIST Root which include this port.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..200000000  

mstCistCurCfgPortLinkType 1.3.6.1.4.1.1872.2.5.2.1.7.2.3.1.4
The administrative point-to-point status of the LAN segment attached to this port. A value of p2p (2) indicates that this port should always be treated as if it is connected to a point-to-point link. A value of shared(3) indicates that this port should be treated as having a shared media connection. A value of auto(1) indicates that this port is considered to have a point-to-point link if it is an Aggregator and all of its members are aggregatable, or if the MAC entity is configured for full duplex operation, either through auto-negotiation or by management means.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER auto(1), p2p(2), shared(3)  

mstCistCurCfgPortEdge 1.3.6.1.4.1.1872.2.5.2.1.7.2.3.1.5
The value of the Edge Port parameter.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

mstCistCurCfgPortStpState 1.3.6.1.4.1.1872.2.5.2.1.7.2.3.1.6
Turn port's Spanning Tree on/off.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER on(1), off(2)  

mstCistCurCfgPortHelloTime 1.3.6.1.4.1.1872.2.5.2.1.7.2.3.1.7
The amount of time between the transmission of Configuration Port PDUs in seconds.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..10  

mstCistNewCfgPortTable 1.3.6.1.4.1.1872.2.5.2.1.7.2.4
The table of CIST Port configuration.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MstCistNewCfgPortTableEntry

mstCistNewCfgPortTableEntry 1.3.6.1.4.1.1872.2.5.2.1.7.2.4.1
Information about a particular CIST Port configuration.
Status: current Access: not-accessible
OBJECT-TYPE    
  MstCistNewCfgPortTableEntry  

mstCistNewCfgPortIndex 1.3.6.1.4.1.1872.2.5.2.1.7.2.4.1.1
The port number of the port for which this entry contains spanning tree configuration.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

mstCistNewCfgPortPriority 1.3.6.1.4.1.1872.2.5.2.1.7.2.4.1.2
The four most significant bits of the Port Identifier of the Spanning Tree instance can be modified by setting this value.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..240  

mstCistNewCfgPortPathCost 1.3.6.1.4.1.1872.2.5.2.1.7.2.4.1.3
The contribution of this port to the path cost of paths towards the CIST Root which include this port.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..200000000  

mstCistNewCfgPortLinkType 1.3.6.1.4.1.1872.2.5.2.1.7.2.4.1.4
The administrative point-to-point status of the LAN segment attached to this port. A value of p2p (2) indicates that this port should always be treated as if it is connected to a point-to-point link. A value of shared(3) indicates that this port should be treated as having a shared media connection. A value of auto(1) indicates that this port is considered to have a point-to-point link if it is an Aggregator and all of its members are aggregatable, or if the MAC entity is configured for full duplex operation, either through auto-negotiation or by management means.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER auto(1), p2p(2), shared(3)  

mstCistNewCfgPortEdge 1.3.6.1.4.1.1872.2.5.2.1.7.2.4.1.5
The value of the Edge Port parameter.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

mstCistNewCfgPortStpState 1.3.6.1.4.1.1872.2.5.2.1.7.2.4.1.6
Turn port's Spanning Tree on/off.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER on(1), off(2)  

mstCistNewCfgPortHelloTime 1.3.6.1.4.1.1872.2.5.2.1.7.2.4.1.7
The amount of time between the transmission of Configuration Port PDUs in seconds.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..10  

portTeamTableMaxSize 1.3.6.1.4.1.1872.2.5.2.1.9.1
The maximum number of port teams.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

portTeamCurCfgTable 1.3.6.1.4.1.1872.2.5.2.1.9.2
The port team current configuration.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PortTeamCurCfgTableEntry

portTeamCurCfgTableEntry 1.3.6.1.4.1.1872.2.5.2.1.9.2.1
A row in the port team configuration table.
Status: current Access: not-accessible
OBJECT-TYPE    
  PortTeamCurCfgTableEntry  

portTeamCurCfgIndex 1.3.6.1.4.1.1872.2.5.2.1.9.2.1.1
The identifier of the port team.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

portTeamCurCfgState 1.3.6.1.4.1.1872.2.5.2.1.9.2.1.2
Enable or disable a port team.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

portTeamCurCfgPorts 1.3.6.1.4.1.1872.2.5.2.1.9.2.1.3
The port list in the port team. The ports are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... | |||_ port 8 | || | ||___ port 7 | |____ port 6 | . . . |_________ port 1 where x : 1 - The represented port belongs to the port team 0 - The represented port does not belong to the port team
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

portTeamCurCfgTrunks 1.3.6.1.4.1.1872.2.5.2.1.9.2.1.4
The trunk list in the port team. The trunks are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... | |||_ trunk 8 | || | ||___ trunk 7 | |____ trunk 6 | . . . |_________ trunk 1 where x : 1 - The represented trunk belongs to the port team 0 - The represented trunk does not belong to the port team
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

portTeamCurCfgName 1.3.6.1.4.1.1872.2.5.2.1.9.2.1.5
Name of the Port Team.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..31)  

portTeamNewCfgTable 1.3.6.1.4.1.1872.2.5.2.1.9.3
The port team new configuration.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PortTeamNewCfgTableEntry

portTeamNewCfgTableEntry 1.3.6.1.4.1.1872.2.5.2.1.9.3.1
A row in the port team configuration table.
Status: current Access: not-accessible
OBJECT-TYPE    
  PortTeamNewCfgTableEntry  

portTeamNewCfgIndex 1.3.6.1.4.1.1872.2.5.2.1.9.3.1.1
The identifier of the port team.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

portTeamNewCfgState 1.3.6.1.4.1.1872.2.5.2.1.9.3.1.2
Enable or disable a port team.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

portTeamNewCfgPorts 1.3.6.1.4.1.1872.2.5.2.1.9.3.1.3
The port list in the port team. The ports are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... | |||_ port 8 | || | ||___ port 7 | |____ port 6 | . . . |_________ port 1 where x : 1 - The represented port belongs to the port team 0 - The represented port does not belong to the port team
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

portTeamNewCfgAddPort 1.3.6.1.4.1.1872.2.5.2.1.9.3.1.4
The port to be added in the port team. When read, 0 is returned.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

portTeamNewCfgRemovePort 1.3.6.1.4.1.1872.2.5.2.1.9.3.1.5
The port to be deleted from the port team. When read, 0is returned.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

portTeamNewCfgTrunks 1.3.6.1.4.1.1872.2.5.2.1.9.3.1.6
The trunk list in the port team. The trunks are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... | |||_ trunk 8 | || | ||___ trunk 7 | |____ trunk 6 | . . . |_________ trunk 1 where x : 1 - The represented trunk belongs to the port team 0 - The represented trunk does not belong to the port team
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

portTeamNewCfgAddTrunk 1.3.6.1.4.1.1872.2.5.2.1.9.3.1.7
The trunk to be added in the port team. When read, 0 is returned.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

portTeamNewCfgRemoveTrunk 1.3.6.1.4.1.1872.2.5.2.1.9.3.1.8
The trunk to be deleted from the port team. When read, 0is returned.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

portTeamNewCfgDelete 1.3.6.1.4.1.1872.2.5.2.1.9.3.1.9
Setting the value to delete(2) will delete the entire row. When read, other(1) is returned.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER other(1), delete(2)  

portTeamNewCfgName 1.3.6.1.4.1.1872.2.5.2.1.9.3.1.10
Name of the Port Team.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..31)  

portTeamInfoTable 1.3.6.1.4.1.1872.2.5.2.3.6.1
The port team information table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PortTeamInfoTableEntry

portTeamInfoTableEntry 1.3.6.1.4.1.1872.2.5.2.3.6.1.1
A row in the port team information table.
Status: current Access: not-accessible
OBJECT-TYPE    
  PortTeamInfoTableEntry  

portTeamInfoIndex 1.3.6.1.4.1.1872.2.5.2.3.6.1.1.1
The identifier of the port team.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

portTeamInfoState 1.3.6.1.4.1.1872.2.5.2.3.6.1.1.2
State of a port team.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER off(1), passive(2), active(3)  

portTeamInfoPorts 1.3.6.1.4.1.1872.2.5.2.3.6.1.1.3
The port list in the port team. The ports are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... | |||_ port 8 | || | ||___ port 7 | |____ port 6 | . . . |_________ port 1 where x : 1 - The represented port is added to the port team 0 - The represented port is not added to the port team
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

portTeamInfoPortsState 1.3.6.1.4.1.1872.2.5.2.3.6.1.1.4
The port state list in the port team. The ports states are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... | |||_ port 8 state | || | ||___ port 7 state | |____ port 6 state | . . . |_________ port 1 state where x : 1 - The represented port in that team is up 0 - If the represented port is added in that team then the port state is down otherwise the port is not added into that team( check whether port is added to the team or not through the mib portTeamInfoPorts).
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

portTeamInfoTrunks 1.3.6.1.4.1.1872.2.5.2.3.6.1.1.5
The trunk list in the port team. The trunks are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... | |||_ trunk 8 | || | ||___ trunk 7 | |____ trunk 6 | . . . |_________ trunk 1 where x : 1 - The represented trunk belongs to the port team 0 - The represented trunk does not belong to the port team
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

portTeamInfoTrunksState 1.3.6.1.4.1.1872.2.5.2.3.6.1.1.6
The trunk state list in the trunk team. The trunks states are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... | |||_ trunk 8 state | || | ||___ trunk 7 state | |____ trunk 6 state | . . . |_________ trunk 1 state where x : 1 - The represented trunk in that team is up 0 - If the represented trunk is added in that team then the trunk state is down otherwise the port is not added into that team( check whether it is added to the team or not through the mib portTeamInfoTrunks).
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

portTeamInfoMaster 1.3.6.1.4.1.1872.2.5.2.3.6.1.1.7
The master port/trunk of the port team when team state is ACTIVE.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

vadcVlanCurCfgTable 1.3.6.1.4.1.1872.2.5.2.1.10.1
The vADC table of VLAN configuration.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VadcVlanCurCfgTableEntry

vadcVlanCurCfgTableEntry 1.3.6.1.4.1.1872.2.5.2.1.10.1.1
A row in the VLAN configuration table.
Status: current Access: not-accessible
OBJECT-TYPE    
  VadcVlanCurCfgTableEntry  

vadcVlanCurCfgVlanId 1.3.6.1.4.1.1872.2.5.2.1.10.1.1.1
The VLAN identifier.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

vadcVlanCurCfgBwmCont 1.3.6.1.4.1.1872.2.5.2.1.10.1.1.2
Default contract number for the VLAN
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

vadcVlanCurCfgNonIp 1.3.6.1.4.1.1872.2.5.2.1.10.1.1.3
BWM contract for non-ip traffic
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

vadcVlanCurCfgIpv6LlaGen 1.3.6.1.4.1.1872.2.5.2.1.10.1.1.4
Enable/disable IPv6 Link Local Address Generation.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(2), disabled(3)  

vadcVlanCurCfgRouterAdv 1.3.6.1.4.1.1872.2.5.2.1.10.1.1.5
Enable/disable router advertisement.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(2), disabled(3)  

vadcVlanCurCfgReTransInt 1.3.6.1.4.1.1872.2.5.2.1.10.1.1.6
Retransmission interval.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

vadcVlanCurCfgMinIntBwAdv 1.3.6.1.4.1.1872.2.5.2.1.10.1.1.7
Minimum interval between router advertisements.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 3..1800  

vadcVlanCurCfgMaxIntBwAdv 1.3.6.1.4.1.1872.2.5.2.1.10.1.1.8
Maximum interval between router advertisements.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 4..1800  

vadcVlanCurCfgMtu 1.3.6.1.4.1.1872.2.5.2.1.10.1.1.9
Maximum Transmission Unit. Enter 0 for None.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1200..1500  

vadcVlanCurCfgCurHopLimit 1.3.6.1.4.1.1872.2.5.2.1.10.1.1.10
Current hop limit field.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

vadcVlanCurCfgMFlag 1.3.6.1.4.1.1872.2.5.2.1.10.1.1.11
Enable / Disable Managed address configuration flag.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(2), disabled(3)  

vadcVlanCurCfgOFlag 1.3.6.1.4.1.1872.2.5.2.1.10.1.1.12
Enable / Disable Other address configuration flag.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(2), disabled(3)  

vadcVlanCurCfgRTime 1.3.6.1.4.1.1872.2.5.2.1.10.1.1.13
Reachable time.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..3600000  

vadcVlanCurCfgRlTime 1.3.6.1.4.1.1872.2.5.2.1.10.1.1.14
Life Time.Enter 0 for None
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..9000  

vadcVlanCurCfgPlTime 1.3.6.1.4.1.1872.2.5.2.1.10.1.1.15
Preferred life time.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

vadcVlanCurCfgVlTime 1.3.6.1.4.1.1872.2.5.2.1.10.1.1.16
Valid life time.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..4294967295  

vadcVlanCurCfgOpInfo 1.3.6.1.4.1.1872.2.5.2.1.10.1.1.17
Enable / Disable On-link flag in prefix.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(2), disabled(3)  

vadcVlanCurCfgApInfo 1.3.6.1.4.1.1872.2.5.2.1.10.1.1.18
Enable / Disable Autonomous address configuration flag in prefix.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(2), disabled(3)  

vadcVlanNewCfgTable 1.3.6.1.4.1.1872.2.5.2.1.10.2
The vADC table of VLAN configuration.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VadcVlanNewCfgTableEntry

vadcVlanNewCfgTableEntry 1.3.6.1.4.1.1872.2.5.2.1.10.2.1
A row in the VLAN configuration table.
Status: current Access: not-accessible
OBJECT-TYPE    
  VadcVlanNewCfgTableEntry  

vadcVlanNewCfgVlanId 1.3.6.1.4.1.1872.2.5.2.1.10.2.1.1
The VLAN identifier.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

vadcVlanNewCfgBwmCont 1.3.6.1.4.1.1872.2.5.2.1.10.2.1.2
Default contract number for the VLAN
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

vadcVlanNewCfgNonIp 1.3.6.1.4.1.1872.2.5.2.1.10.2.1.3
BWM contract for non-ip traffic
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

vadcVlanNewCfgIpv6LlaGen 1.3.6.1.4.1.1872.2.5.2.1.10.2.1.4
Enable/disable IPv6 Link Local Address Generation.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(2), disabled(3)  

vadcVlanNewCfgRouterAdv 1.3.6.1.4.1.1872.2.5.2.1.10.2.1.5
Enable/disable router advertisement.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(2), disabled(3)  

vadcVlanNewCfgReTransInt 1.3.6.1.4.1.1872.2.5.2.1.10.2.1.6
Retransmission interval.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..4294967295  

vadcVlanNewCfgMinIntBwAdv 1.3.6.1.4.1.1872.2.5.2.1.10.2.1.7
Minimum interval between router advertisements.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 3..1800  

vadcVlanNewCfgMaxIntBwAdv 1.3.6.1.4.1.1872.2.5.2.1.10.2.1.8
Maximum interval between router advertisements.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 4..1800  

vadcVlanNewCfgMtu 1.3.6.1.4.1.1872.2.5.2.1.10.2.1.9
Maximum Transmission Unit. Enter 0 for None.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1200..1500  

vadcVlanNewCfgCurHopLimit 1.3.6.1.4.1.1872.2.5.2.1.10.2.1.10
Current hop limit field.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..255  

vadcVlanNewCfgMFlag 1.3.6.1.4.1.1872.2.5.2.1.10.2.1.11
Enable / Disable Managed address configuration flag.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(2), disabled(3)  

vadcVlanNewCfgOFlag 1.3.6.1.4.1.1872.2.5.2.1.10.2.1.12
Enable / Disable Other address configuration flag.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(2), disabled(3)  

vadcVlanNewCfgRTime 1.3.6.1.4.1.1872.2.5.2.1.10.2.1.13
Reachable time.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..3600000  

vadcVlanNewCfgRlTime 1.3.6.1.4.1.1872.2.5.2.1.10.2.1.14
Life Time.Enter 0 for None
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..9000  

vadcVlanNewCfgPlTime 1.3.6.1.4.1.1872.2.5.2.1.10.2.1.15
Preferred life time.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..4294967295  

vadcVlanNewCfgVlTime 1.3.6.1.4.1.1872.2.5.2.1.10.2.1.16
Valid life time.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..4294967295  

vadcVlanNewCfgOpInfo 1.3.6.1.4.1.1872.2.5.2.1.10.2.1.17
Enable / Disable On-link flag in prefix.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(2), disabled(3)  

vadcVlanNewCfgApInfo 1.3.6.1.4.1.1872.2.5.2.1.10.2.1.18
Enable / Disable Autonomous address configuration flag in prefix.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(2), disabled(3)  

fdbStatsCreates 1.3.6.1.4.1.1872.2.5.2.2.1.1
Number of entries created in the Forwarding Database.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

fdbStatsDeletes 1.3.6.1.4.1.1872.2.5.2.2.1.2
Number of entries deleted from the Forwarding Database.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

fdbStatsCurrent 1.3.6.1.4.1.1872.2.5.2.2.1.3
Current number of entries in the Forwarding Database.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

fdbStatsHiwat 1.3.6.1.4.1.1872.2.5.2.2.1.4
Highest number of entries recorded at any given time in the Forwarding Database.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

fdbStatsLookups 1.3.6.1.4.1.1872.2.5.2.2.1.5
Number of entry lookups in the Forwarding Database.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

fdbStatsLookupFails 1.3.6.1.4.1.1872.2.5.2.2.1.6
Number of unsuccessful searches made in the Forwarding Database.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

fdbStatsFinds 1.3.6.1.4.1.1872.2.5.2.2.1.7
Number of searches in the Forwarding Database.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

fdbStatsFindFails 1.3.6.1.4.1.1872.2.5.2.2.1.8
Number of search failures in the Forwarding Database.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

fdbStatsFindOrCreates 1.3.6.1.4.1.1872.2.5.2.2.1.9
Number of entries found or created in the Forwarding Database.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

fdbStatsOverflows 1.3.6.1.4.1.1872.2.5.2.2.1.10
Number of entries overflowing the Forwarding Database.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

stgStatsPortTable 1.3.6.1.4.1.1872.2.5.2.2.2.1
The table of Spanning Tree Group port statistics.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    StgStatsPortTableEntry

stgStatsPortTableEntry 1.3.6.1.4.1.1872.2.5.2.2.2.1.1
Statistics about port of a particular Spanning Tree Group.
Status: current Access: not-accessible
OBJECT-TYPE    
  StgStatsPortTableEntry  

stgStatsStpIndex 1.3.6.1.4.1.1872.2.5.2.2.2.1.1.1
The identifier of a particular Spanning Tree Group.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

stgStatsPortIndex 1.3.6.1.4.1.1872.2.5.2.2.2.1.1.2
The port identifier of a particular Spanning Tree Group.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

stgStatsPortRcvCfgBpdus 1.3.6.1.4.1.1872.2.5.2.2.2.1.1.3
Number of Configuration BPDU's received on this port.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

stgStatsPortRcvTcnBpdus 1.3.6.1.4.1.1872.2.5.2.2.2.1.1.4
Number of TCN BPDU's received on this port.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

stgStatsPortXmtCfgBpdus 1.3.6.1.4.1.1872.2.5.2.2.2.1.1.5
Number of Configuration BPDU's trasmitted from the port.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

stgStatsPortXmtTcnBpdus 1.3.6.1.4.1.1872.2.5.2.2.2.1.1.6
Number of TCN BPDU's trasmitted from the port.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

fdbClear 1.3.6.1.4.1.1872.2.5.2.3.1.1
Setting this value to clear(2) clears the entire master FDB.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER ok(1), clear(2)  

fdbTable 1.3.6.1.4.1.1872.2.5.2.3.1.2
The table of FDB entries.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FdbEntry

fdbEntry 1.3.6.1.4.1.1872.2.5.2.3.1.2.1
A row in the FDB table
Status: current Access: not-accessible
OBJECT-TYPE    
  FdbEntry  

fdbMacAddr 1.3.6.1.4.1.1872.2.5.2.3.1.2.1.1
The MAC address for the FDB entry.
Status: current Access: read-only
OBJECT-TYPE    
  PhysAddress  

fdbVlan 1.3.6.1.4.1.1872.2.5.2.3.1.2.1.2
The VLAN ID for the FDB entry.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

fdbSrcPort 1.3.6.1.4.1.1872.2.5.2.3.1.2.1.3
Either the value '0', or the port number of the port on which a frame having a source address equal to the value of the corresponding instance has been seen. A value of '0' indicates that the port number has not been learned but that the bridge does have some forwarding/filtering information about this address.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

fdbState 1.3.6.1.4.1.1872.2.5.2.3.1.2.1.4
The state of the FDB entry. The meanings of the values are : unknown(1) : the MAC address has not yet been learned by the switch but has only been seen as a destination address forward(3) : the MAC address has been learned by the switch flood(4) : the MAC address is a multicast destination address trunk(6) : frames with this MAC address are forwarded to trunk group vir(7) : frames with this MAC address are forwarded for L3 processing
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), ignore(2), forward(3), flood(4), ffd(5), trunk(6), vir(7), vsr(8), vpr(9), other(10)  

fdbRefSps 1.3.6.1.4.1.1872.2.5.2.3.1.2.1.5
The referenced SPs associated with this FDB entry.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

fdbLearnedPort 1.3.6.1.4.1.1872.2.5.2.3.1.2.1.6
The learned port associated with this FDB entry.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

fdbSrcTrunk 1.3.6.1.4.1.1872.2.5.2.3.1.2.1.7
Either the value '0', or the trunk number of the trunk on which a frame having a source address equal to the value of the corresponding instance has been seen. A value of '0' indicates that the source address is not associated with a trunk.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

stpInfoTable 1.3.6.1.4.1.1872.2.5.2.3.2.1
The table of Spanning Tree Group information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    StpInfoTableEntry

stpInfoTableEntry 1.3.6.1.4.1.1872.2.5.2.3.2.1.1
Information about a particular Spanning Tree Group.
Status: current Access: not-accessible
OBJECT-TYPE    
  StpInfoTableEntry  

stpInfoIndex 1.3.6.1.4.1.1872.2.5.2.3.2.1.1.1
The identifier of a particular Spanning Tree Group. This is also index to the entLogicalTable of Entity MIB.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

stpInfoTimeSinceTopChange 1.3.6.1.4.1.1872.2.5.2.3.2.1.1.2
The time (in hundredths of a second) since the last time a topology change was detected by the bridge entity.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

stpInfoTopChanges 1.3.6.1.4.1.1872.2.5.2.3.2.1.1.3
The total number of topology changes detected by this bridge since the management entity was last reset or initialized.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

stpInfoDesignatedRoot 1.3.6.1.4.1.1872.2.5.2.3.2.1.1.4
The bridge identifier of the root of the spanning tree as determined by the Spanning Tree Protocol as executed by this node. This value is used as the Root Identifier parameter in all Configuration Bridge PDUs originated by this node.
Status: current Access: read-only
OBJECT-TYPE    
  BridgeId  

stpInfoRootCost 1.3.6.1.4.1.1872.2.5.2.3.2.1.1.5
The cost of the path to the root as seen from this bridge.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

stpInfoRootPort 1.3.6.1.4.1.1872.2.5.2.3.2.1.1.6
The port number of the port which offers the lowest cost path from this bridge to the root bridge.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

stpInfoMaxAge 1.3.6.1.4.1.1872.2.5.2.3.2.1.1.7
The maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded, in units of hundredths of a second. This is the actual value that this bridge is currently using.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

stpInfoHelloTime 1.3.6.1.4.1.1872.2.5.2.3.2.1.1.8
The amount of time between the transmission of Configuration bridge PDUs by this node on any port when it is the root of the spanning tree or trying to become so, in units of hundredths of a second. This is the actual value that this bridge is currently using.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

stpInfoForwardDelay 1.3.6.1.4.1.1872.2.5.2.3.2.1.1.9
This time value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving towards the Forwarding state. The value determines how long the port stays in each of the Listening and Learning states, which precede the Forwarding state. This value is also used, when a topology change has been detected and is underway, to age all dynamic entries in the Forwarding Database.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

stpInfoHoldTime 1.3.6.1.4.1.1872.2.5.2.3.2.1.1.10
This time value determines the interval length during which no more than two Configuration bridge PDUs shall be transmitted by this node, in units of hundredths of a second.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

stpInfoPortTable 1.3.6.1.4.1.1872.2.5.2.3.2.2
The table of Spanning Tree Group port information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    StpInfoPortTableEntry

stpInfoPortTableEntry 1.3.6.1.4.1.1872.2.5.2.3.2.2.1
Information about port configuration for a particular Spanning Tree Group.
Status: current Access: not-accessible
OBJECT-TYPE    
  StpInfoPortTableEntry  

stpInfoPortStpIndex 1.3.6.1.4.1.1872.2.5.2.3.2.2.1.1
The identifier of a particular Spanning Tree Group.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

stpInfoPortIndex 1.3.6.1.4.1.1872.2.5.2.3.2.2.1.2
The port identifier of a particular Spanning Tree Group.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

stpInfoPortState 1.3.6.1.4.1.1872.2.5.2.3.2.2.1.3
The port's current state as defined by application of the Spanning Tree Protocol. This state controls what action a port takes on reception of a frame. If the bridge has detected a port that is malfunctioning it will place that port into the broken(6) state. For ports which are disabled, this object will have a value of disabled(1).
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER disabled(1), blocking(2), listening(3), learning(4), forwarding(5), broken(6), discarding(7)  

stpInfoPortDesignatedRoot 1.3.6.1.4.1.1872.2.5.2.3.2.2.1.4
The unique Bridge Identifier of the Bridge recorded as the Root in the Configuration BPDUs transmitted by the Designated Bridge for the segment to which the port is attached.
Status: current Access: read-only
OBJECT-TYPE    
  BridgeId  

stpInfoPortDesignatedCost 1.3.6.1.4.1.1872.2.5.2.3.2.2.1.5
The path cost of the Designated Port of the segment connected to this port. This value is compared to the Root Path Cost field in received bridge PDUs.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

stpInfoPortDesignatedBridge 1.3.6.1.4.1.1872.2.5.2.3.2.2.1.6
The Bridge Identifier of the bridge which this port considers to be the Designated Bridge for this port's segment.
Status: current Access: read-only
OBJECT-TYPE    
  BridgeId  

stpInfoPortDesignatedPort 1.3.6.1.4.1.1872.2.5.2.3.2.2.1.7
The Port Identifier of the port on the Designated Bridge for this port's segment.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(2)  

stpInfoPortForwardTransitions 1.3.6.1.4.1.1872.2.5.2.3.2.2.1.8
The number of times this port has transitioned from the Learning state to the Forwarding state.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

stpInfoPortPathCost 1.3.6.1.4.1.1872.2.5.2.3.2.2.1.9
The path cost of the port.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

stpInfoPortRole 1.3.6.1.4.1.1872.2.5.2.3.2.2.1.10
The port role. Returns unknown(7) when MSTP/RSTP is not enabled, otherwise returns appropriate port role.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER disabled(1), alternate(2), backup(3), root(4), designated(5), master(6), unknown(7)  

stpInfoPortLinkType 1.3.6.1.4.1.1872.2.5.2.3.2.2.1.11
The point-to-point status of the LAN segment attached to this port. A value of p2p (1) indicates that this port is being treated as if it is connected to a point-to-point link. A value of shared(2) indicates that this port is being treated as having a shared media connection.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER p2p(1), shared(2), unknown(3)  

stpInfoPortEdge 1.3.6.1.4.1.1872.2.5.2.3.2.2.1.12
The port is an edge port or not. Returns disabled(2) when the port is not an edge port and returns enabled(1) when it is an edge port.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

lacpInfoPortTable 1.3.6.1.4.1.1872.2.5.2.3.3.1
The table of LACP port information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    LacpInfoPortTableEntry

lacpInfoPortTableEntry 1.3.6.1.4.1.1872.2.5.2.3.3.1.1
Information about a LACP port.
Status: current Access: not-accessible
OBJECT-TYPE    
  LacpInfoPortTableEntry  

lacpInfoPortIndex 1.3.6.1.4.1.1872.2.5.2.3.3.1.1.1
The port identifier.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

lacpInfoPortSelected 1.3.6.1.4.1.1872.2.5.2.3.3.1.1.2
Selected flag value indicates that the selection logic has selected an appropriate Aggregator. A value of unselected indicates that no aggregator is currently selected. A value of standby indicates that although the selection logic has selected an appropriate Aggregator, aggregation restrictions currently precent the port from being enabled as part of the aggregation, and so the port is being held in standby condition.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER selected(1), unselected(2), standby(3)  

lacpInfoPortNtt 1.3.6.1.4.1.1872.2.5.2.3.3.1.1.3
Need to transmit flag. True indicates that there is new protocol information that should be transmitted on the link.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER true(1), false(2)  

lacpInfoPortReadyN 1.3.6.1.4.1.1872.2.5.2.3.3.1.1.4
True value for Ready_N flag indicates that the wait while timer has expired and it is waiting to attach to an aggregator. There is one Ready_N value for each port.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER true(1), false(2)  

lacpInfoPortMoved 1.3.6.1.4.1.1872.2.5.2.3.3.1.1.5
Port Moved flag is set to true if the receive machine for a port is in the port_disabled state, and the combination of partner oper system and partner oper port number in use by the port has been used by received in an incoming LACPDU on a different port.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER true(1), false(2)  

cistRoot 1.3.6.1.4.1.1872.2.5.2.3.4.1.1
The bridge identifier of the Root of the common spanning tree as determined by the Spanning Tree Protocol as executed by this node. This value is used as the CIST Root Identifier parameter in all Configuration Bridge PDUs originated by this node.
Status: current Access: read-only
OBJECT-TYPE    
  BridgeId  

cistRootPathCost 1.3.6.1.4.1.1872.2.5.2.3.4.1.2
The cost of the path to the CIST Root as seen from this bridge.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

cistRootPort 1.3.6.1.4.1.1872.2.5.2.3.4.1.3
The Port Number of the Port which offers the lowest path cost from this bridge to the CIST Root Bridge.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

cistBridgeHelloTime 1.3.6.1.4.1.1872.2.5.2.3.4.1.4
The amount of time between the transmission of Configuration bridge PDUs in seconds.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

cistBridgeMaxAge 1.3.6.1.4.1.1872.2.5.2.3.4.1.5
The value in seconds that all bridges use for MaxAge when this bridge is acting as the root.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

cistBridgeForwardDelay 1.3.6.1.4.1.1872.2.5.2.3.4.1.6
The value in seconds that all bridges use for ForwardDelay when this bridge is acting as the root.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

cistRegionalRoot 1.3.6.1.4.1.1872.2.5.2.3.4.1.7
The bridge identifier of the Root of the Multiple spanning tree region as determined by the Spanning Tree Protocol as executed by this node. This value is used as the CIST Regional Root Identifier parameter in all Configuration Bridge PDUs originated by this node.
Status: current Access: read-only
OBJECT-TYPE    
  BridgeId  

cistRegionalPathCost 1.3.6.1.4.1.1872.2.5.2.3.4.1.8
The Cost of the path to the CIST Regional Root as seen from this bridge.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

cistInfoPortTable 1.3.6.1.4.1.1872.2.5.2.3.4.2
The table of CIST Port information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CistInfoPortTableEntry

cistInfoPortTableEntry 1.3.6.1.4.1.1872.2.5.2.3.4.2.1
Information about a particular CIST Port.
Status: current Access: not-accessible
OBJECT-TYPE    
  CistInfoPortTableEntry  

cistInfoPortIndex 1.3.6.1.4.1.1872.2.5.2.3.4.2.1.1
The port number of the port for which this entry contains spanning tree configuration.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

cistInfoPortPriority 1.3.6.1.4.1.1872.2.5.2.3.4.2.1.2
The four most significant bits of the Port Identifier of the Spanning Tree instance can be modified by setting this value.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

cistInfoPortPathCost 1.3.6.1.4.1.1872.2.5.2.3.4.2.1.3
The contribution of this port to the path cost of paths towards the CIST Root which include this port.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

cistInfoPortState 1.3.6.1.4.1.1872.2.5.2.3.4.2.1.4
Current state of the Port as defined by the Common spanning tree protocol.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER disabled(1), discarding(2), learning(4), forwarding(5)  

cistInfoPortRole 1.3.6.1.4.1.1872.2.5.2.3.4.2.1.5
Selected Port Role of the port for this spanning tree instance.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER disabled(1), alternate(2), backup(3), root(4), designated(5), master(6), unknown(7)  

cistInfoPortDesignatedBridge 1.3.6.1.4.1.1872.2.5.2.3.4.2.1.6
The unique Bridge Identifier of the bridge which this port considers to be the Designated Bridge for the port's segment.
Status: current Access: read-only
OBJECT-TYPE    
  BridgeId  

cistInfoPortDesignatedPort 1.3.6.1.4.1.1872.2.5.2.3.4.2.1.7
The Port identifier of the port on the Designated Bridge for this port's segment.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(2)  

cistInfoPortLinkType 1.3.6.1.4.1.1872.2.5.2.3.4.2.1.8
The point-to-point status of the LAN segment attached to this port. A value of p2p (2) indicates that this port is being treated as if it is connected to a point-to-point link. A value of shared(3) indicates that this port is being treated as having a shared media connection.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER p2p(1), shared(2), unknown(3)  

vlanInfoTable 1.3.6.1.4.1.1872.2.5.2.3.5.1
The table of VLAN information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VlanInfoTableEntry

vlanInfoTableEntry 1.3.6.1.4.1.1872.2.5.2.3.5.1.1
Information about a particular VLAN.
Status: current Access: not-accessible
OBJECT-TYPE    
  VlanInfoTableEntry  

vlanInfoId 1.3.6.1.4.1.1872.2.5.2.3.5.1.1.1
The VLAN identifier.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..4090  

vlanInfoName 1.3.6.1.4.1.1872.2.5.2.3.5.1.1.2
The VLAN name.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

vlanInfoStatus 1.3.6.1.4.1.1872.2.5.2.3.5.1.1.3
Enable or disable, VLAN state information
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(2), disabled(3)  

vlanInfoJumbo 1.3.6.1.4.1.1872.2.5.2.3.5.1.1.4
Enable or disable Jumbo frames, Jumbo frames state information of a VLAN
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(2), disabled(3)  

vlanInfoBwmContract 1.3.6.1.4.1.1872.2.5.2.3.5.1.1.5
Default BWM contract number information of a VLAN
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

vlanInfoLearn 1.3.6.1.4.1.1872.2.5.2.3.5.1.1.6
Enable or disable source MAC address learning, MAC address learning information of a VLAN
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(2), disabled(3)  

vlanInfoPorts 1.3.6.1.4.1.1872.2.5.2.3.5.1.1.7
The port list information in the VLAN. The ports are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ port 8 || || || ||___ port 7 || |____ port 6 || . . . ||_________ port 1 |__________ reserved where x : 1 - The represented port belongs to the VLAN 0 - The represented port does not belong to the VLAN
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

vlanInfoTableVADC 1.3.6.1.4.1.1872.2.5.2.3.5.2
The table of VLAN information for vADC.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VlanInfoTableVADCEntry

vlanInfoTableVADCEntry 1.3.6.1.4.1.1872.2.5.2.3.5.2.1
Information about a particular VLAN for vADC.
Status: current Access: not-accessible
OBJECT-TYPE    
  VlanInfoTableVADCEntry  

vlanInfoIdx 1.3.6.1.4.1.1872.2.5.2.3.5.2.1.1
The VLAN identifier.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..4090  

vlanInfoVADC 1.3.6.1.4.1.1872.2.5.2.3.5.2.1.2
Display the VADC number which is connected to this VLAN.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..255)  

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor