ZYXEL-ES3500-8PD-MIB

File: ZYXEL-ES3500-8PD-MIB.mib (300565 bytes)

Imported modules

RFC1155-SMI SNMPv2-SMI SNMPv2-TC
RFC1213-MIB P-BRIDGE-MIB Q-BRIDGE-MIB
BRIDGE-MIB IF-MIB SNMP-FRAMEWORK-MIB
INET-ADDRESS-MIB DISMAN-PING-MIB IEEE8021-CFM-MIB

Imported symbols

enterprises OBJECT-TYPE Integer32
Counter32 Unsigned32 RowStatus
DateAndTime TruthValue StorageType
MacAddress DisplayString EnabledStatus
PortList dot1dBasePort InterfaceIndexOrZero
SnmpAdminString InetAddressType InetAddress
OperationResponseStatus Counter TimeTicks
BridgeId Timeout dot1agCfmMdIndex
dot1agCfmMaIndex dot1agCfmMepIdentifier IpAddress
ifIndex NOTIFICATION-TYPE sysObjectID

Defined Types

RateLimitPortEntry  
SEQUENCE    
  rateLimitPortState EnabledStatus
  rateLimitPortCommitRate INTEGER
  rateLimitPortPeakRate INTEGER
  rateLimitPortEgrRate INTEGER
  rateLimitPortPeakState EnabledStatus
  rateLimitPortEgrState EnabledStatus
  rateLimitPortCommitState EnabledStatus

BrLimitPortEntry  
SEQUENCE    
  brLimitPortBrState EnabledStatus
  brLimitPortBrRate INTEGER
  brLimitPortMcState EnabledStatus
  brLimitPortMcRate INTEGER
  brLimitPortDlfState EnabledStatus
  brLimitPortDlfRate INTEGER

PortSecurityPortEntry  
SEQUENCE    
  portSecurityPortState EnabledStatus
  portSecurityPortLearnState EnabledStatus
  portSecurityPortCount INTEGER

VlanTrunkPortEntry  
SEQUENCE    
  vlanTrunkPortState EnabledStatus

VlanStackPortEntry  
SEQUENCE    
  vlanStackPortMode INTEGER
  vlanStackPortVid INTEGER
  vlanStackPortPrio INTEGER
  vlanStackTunnelPortTpid INTEGER

SelectiveQinQEntry  
SEQUENCE    
  selectiveQinQName DisplayString
  selectiveQinQPort INTEGER
  selectiveQinQCvid INTEGER
  selectiveQinQSpvid INTEGER
  selectiveQinQPriority INTEGER
  selectiveQinQRowStatus RowStatus

PortAuthEntry  
SEQUENCE    
  portAuthEntryState EnabledStatus
  portReAuthEntryState EnabledStatus
  portReAuthEntryTimer INTEGER
  portAuthQuietPeriod INTEGER
  portAuthTxPeriod INTEGER
  portAuthSupplicantTimeout INTEGER
  portAuthMaxRequest INTEGER
  portAuthGuestVlanState EnabledStatus
  portAuthGuestVlan INTEGER
  portAuthGuestVlanHostMode INTEGER
  portAuthGuestVlanHostModeMultiSecureNumber INTEGER

TempEntry  
SEQUENCE    
  tempIndex INTEGER
  tempCurValue INTEGER
  tempMaxValue INTEGER
  tempMinValue INTEGER
  tempHighThresh INTEGER
  tempDescr DisplayString

VoltageEntry  
SEQUENCE    
  voltageIndex INTEGER
  voltageCurValue INTEGER
  voltageMaxValue INTEGER
  voltageMinValue INTEGER
  voltageNominalValue INTEGER
  voltageLowThresh INTEGER
  voltageDescr DisplayString

SnmpTrapDestEntry  
SEQUENCE    
  snmpTrapDestIP IpAddress
  snmpTrapDestRowStatus RowStatus
  snmpTrapDestPort INTEGER
  snmpTrapVersion INTEGER
  snmpTrapUserName DisplayString

SnmpUserEntry  
SEQUENCE    
  snmpUserName DisplayString
  snmpUserSecurityLevel INTEGER
  snmpUserAuthProtocol INTEGER
  snmpUserPrivProtocol INTEGER
  snmpUserGroup DisplayString

SnmpTrapGroupEntry  
SEQUENCE    
  snmpTrapSystemGroup BITS
  snmpTrapInterfaceGroup BITS
  snmpTrapAAAGroup BITS
  snmpTrapIPGroup BITS
  snmpTrapSwitchGroup BITS

IgmpsnpVlanEntry  
SEQUENCE    
  igmpsnpVid INTEGER
  igmpsnpVlanName DisplayString
  igmpsnpVlanRowStatus RowStatus

InbandIpEntry  
SEQUENCE    
  inbandEntryIp IpAddress
  inbandEntrySubnetMask IpAddress
  inbandEntryGateway IpAddress
  inbandEntryVid INTEGER
  inbandEntryManageable EnabledStatus
  inbandEntryRowStatus RowStatus

FilterEntry  
SEQUENCE    
  filterName DisplayString
  filterActionState INTEGER
  filterMacAddr MacAddress
  filterVid INTEGER
  filterRowStatus RowStatus

MirrorEntry  
SEQUENCE    
  mirrorMirroredState EnabledStatus
  mirrorDirection INTEGER

AggrGroupEntry  
SEQUENCE    
  aggrGroupIndex INTEGER
  aggrGroupState EnabledStatus
  aggrGroupDynamicState EnabledStatus
  aggrGroupCriteria INTEGER

AggrPortEntry  
SEQUENCE    
  aggrPortGroup INTEGER
  aggrPortDynamicStateTimeout INTEGER

AccessCtlEntry  
SEQUENCE    
  accessCtlService INTEGER
  accessCtlEnable EnabledStatus
  accessCtlServicePort INTEGER
  accessCtlTimeout INTEGER

SecuredClientEntry  
SEQUENCE    
  securedClientIndex INTEGER
  securedClientEnable EnabledStatus
  securedClientStartIp IpAddress
  securedClientEndIp IpAddress
  securedClientService BITS

PortQueuingMethodEntry  
SEQUENCE    
  portQueuingMethodQueue INTEGER
  portQueuingMethodWeight INTEGER
  portQueuingMethodMode INTEGER

PortQueuingMethodHybridSpqEntry  
SEQUENCE    
  portQueuingMethodHybridSpq INTEGER

GlobalDhcpRelayRemoteServerEntry  
SEQUENCE    
  globalDhcpRelayRemoteServerIp IpAddress
  globalDhcpRelayRemoteServerRowStatus RowStatus

DhcpRelayEntry  
SEQUENCE    
  dhcpRelayOption82Enable EnabledStatus
  dhcpRelayInfoEnable EnabledStatus

DhcpRelayRemoteServerEntry  
SEQUENCE    
  dhcpRelayVid INTEGER
  dhcpRelayRemoteServerIp IpAddress
  dhcpRelayRemoteServerRowStatus RowStatus

StaticRouteEntry  
SEQUENCE    
  staticRouteName DisplayString
  staticRouteIp IpAddress
  staticRouteMask IpAddress
  staticRouteGateway IpAddress
  staticRouteMetric INTEGER
  staticRouteRowStatus RowStatus

ArpEntry  
SEQUENCE    
  arpIndex INTEGER
  arpIpAddr IpAddress
  arpMacAddr MacAddress
  arpMacVid INTEGER
  arpType INTEGER

PortOpModePortEntry  
SEQUENCE    
  portOpModePortSpeedDuplex INTEGER
  portOpModePortFlowCntl INTEGER
  portOpModePortName DisplayString
  portOpModePortModuleType INTEGER
  portOpModePortLinkUpType INTEGER
  portOpModePortIntrusionLock EnabledStatus
  portOpModePortLBTestStatus INTEGER
  portOpModePortCounterReset INTEGER

PortBasedVlanPortListEntry  
SEQUENCE    
  portBasedVlanPortListMembers OCTET STRING

UtcTimeStamp  
Universal Time Coordinated as a 32-bit value that designates the number of seconds since Jan 1, 1970 12:00AM.
TEXTUAL-CONVENTION    
  Unsigned32  

EventIdNumber  
This textual convention describes the index that uniquely identifies a fault event type in the entire system. Every fault event type, e.g. link down, has a unique EventIdNumber.
TEXTUAL-CONVENTION    
  Integer32  

EventSeverity  
This textual convention describes the severity of a fault event. The decreasing order of severity is shown in the textual convention.
TEXTUAL-CONVENTION    
  INTEGER critical(1), major(2), minor(3), informational(4)  

EventServiceAffective  
This textual convention indicates whether an event is immediately service affecting or not.
TEXTUAL-CONVENTION    
  INTEGER noServiceAffected(1), serviceAffected(2)  

InstanceType  
This textual convention describes the type of an instanceId associated with each event and by that means specifies how the instanceId variable should be intepreted. Various instanceId types are specified below to enable fault monitoring for different kind of devices from fixed configuration pizza boxes to multi chassis nodes. All instanceId types may not need to be used in every device type. Note also that instanceId semantics are element type dependent (e.g. different kind of interface naming conventions may be used) and thus instanceId usage may vary from element to element. ========================================================================= Type Description Example form of InstanceId ========================================================================= unknown (1) unknown type - Irrelevant- ------------------------------------------------------------------------- node (2) Associated with events originating from 1 the node. Used for general events that (Node number) can not be associated with any specific block. InstanceId value 1 is used for single node equipment. ------------------------------------------------------------------------- shelf (3) Associated with events originating from 1 the shelf. In the case of fixed (shelf number) configuration devices this type is used for events that are associated with the physical enclosure, e.g. faults related to fan etc. InstanceId value 1 is used for single self equipment. ------------------------------------------------------------------------- line (4) Associated with events originating from physical interfaces or associated components such as line cards. InstanceId usage examples for faults originating from: - Physical port: Simply port number, e.g. .......1 ------------------------------------------------------------------------- switch (5) Associated with events originating from 1 from a switch chip or a switch card. (switch number) For single switch equipment InstanceId value 1 is used, for multi swich nodes InstanceId semantics if for further study. ------------------------------------------------------------------------- lsp (6) Associated with events originating from 1 a particular lsp. (lsp index) NOTE: In this case the InstanceName contains the lsp name and InstanceId contains lsp index. ------------------------------------------------------------------------- l2Interface(7) Associated with events originating from - TBD - a particular layer 2 interface. Used for layer 2 related events such as L2 control protocol faults. InstanceId semantics is for further study. ------------------------------------------------------------------------- l3Interface(8) Associated with events originating from - TBD - a particular layer 3 interface. Used for layer 3 related events such as L3 control protocol faults. InstanceId semantics is for further study. ------------------------------------------------------------------------- rowIndex (9) Associated with events reporting about a 'logical' or conceptual table that consists of rows. The Instance Id is the index/key for a row in the table. The format of the Instance Id will simply be a series of decimal numbers seperated by a '.': =========================================================================
TEXTUAL-CONVENTION    
  INTEGER unknown(1), node(2), shelf(3), line(4), switch(5), lsp(6), l2Interface(7), l3Interface(8), rowIndex(9)  

MstiOrCistInstanceIndex  
This textual convention is an extension of the MstiInstanceIndex convention. This extension permits the additional value of zero, which means Common and Internal Spanning Tree (CIST).
TEXTUAL-CONVENTION    
  Integer32 0..16  

EventEntry  
SEQUENCE    
  eventSeqNum Integer32
  eventEventId EventIdNumber
  eventName DisplayString
  eventInstanceType InstanceType
  eventInstanceId DisplayString
  eventInstanceName DisplayString
  eventSeverity EventSeverity
  eventSetTime UtcTimeStamp
  eventDescription DisplayString
  eventServAffective EventServiceAffective
  eventInstanceIdNumber Integer32

EventPersistence  
This textual convention indicates whether the event is delta (automatically and immediately cleared) or normal (not automatically cleared).
TEXTUAL-CONVENTION    
  INTEGER normal(1), delta(2)  

MulticastPortEntry  
SEQUENCE    
  multicastPortMaxGroupLimited EnabledStatus
  multicastPortMaxOfGroup INTEGER
  multicastPortIgmpFilteringProfile DisplayString
  multicastPortQuerierMode INTEGER
  multicastPortThrottlingAction INTEGER
  multicastPortLeaveMode INTEGER
  multicastPortLeaveTimeout INTEGER
  multicastPortFastLeaveTimeout INTEGER

MulticastStatusEntry  
SEQUENCE    
  multicastStatusIndex INTEGER
  multicastStatusVlanID INTEGER
  multicastStatusPort INTEGER
  multicastStatusGroup IpAddress

IgmpSnpCountEntry  
SEQUENCE    
  igmpSnpCountIndex INTEGER
  igmpSnpV2CountQueryRx INTEGER
  igmpSnpV2CountReportRx INTEGER
  igmpSnpV2CountLeaveRx INTEGER
  igmpSnpV2CountQueryRxDrop INTEGER
  igmpSnpV2CountReportRxDrop INTEGER
  igmpSnpV2CountLeaveRxDrop INTEGER
  igmpSnpV2CountQueryTx INTEGER
  igmpSnpV2CountReportTx INTEGER
  igmpSnpV2CountLeaveTx INTEGER
  igmpSnpV3CountQueryRx INTEGER
  igmpSnpV3CountReportRx INTEGER
  igmpSnpV3CountQueryRxDrop INTEGER
  igmpSnpV3CountReportRxDrop INTEGER
  igmpSnpV3CountQueryTx INTEGER
  igmpSnpV3CountReportTx INTEGER

MulticastVlanStatusEntry  
SEQUENCE    
  multicastVlanStatusVlanID INTEGER
  multicastVlanStatusType INTEGER
  multicastVlanQueryPort PortList

IgmpSnpCountVlanEntry  
SEQUENCE    
  igmpSnpCountVlanIndex INTEGER
  igmpSnpV2CountVlanQueryRx INTEGER
  igmpSnpV2CountVlanReportRx INTEGER
  igmpSnpV2CountVlanLeaveRx INTEGER
  igmpSnpV2CountVlanQueryRxDrop INTEGER
  igmpSnpV2CountVlanReportRxDrop INTEGER
  igmpSnpV2CountVlanLeaveRxDrop INTEGER
  igmpSnpV2CountVlanQueryTx INTEGER
  igmpSnpV2CountVlanReportTx INTEGER
  igmpSnpV2CountVlanLeaveTx INTEGER
  igmpSnpV3CountVlanQueryRx INTEGER
  igmpSnpV3CountVlanReportRx INTEGER
  igmpSnpV3CountVlanQueryRxDrop INTEGER
  igmpSnpV3CountVlanReportRxDrop INTEGER
  igmpSnpV3CountVlanQueryTx INTEGER
  igmpSnpV3CountVlanReportTx INTEGER

IgmpSnpCountPortEntry  
SEQUENCE    
  igmpSnpV2CountPortQueryRx INTEGER
  igmpSnpV2CountPortReportRx INTEGER
  igmpSnpV2CountPortLeaveRx INTEGER
  igmpSnpV2CountPortReportRxDrop INTEGER
  igmpSnpV2CountPortLeaveRxDrop INTEGER
  igmpSnpV2CountPortReportTx INTEGER
  igmpSnpV2CountPortLeaveTx INTEGER
  igmpSnpV3CountPortQueryRx INTEGER
  igmpSnpV3CountPortReportRx INTEGER
  igmpSnpV3CountPortReportRxDrop INTEGER
  igmpSnpV3CountPortReportTx INTEGER

IgmpSnpGroupCountVlanEntry  
SEQUENCE    
  igmpSnpGroupCountVlanIndex INTEGER
  igmpSnpGroupCountVlanNum INTEGER

IgmpSnpGroupCountPortEntry  
SEQUENCE    
  igmpSnpGroupCountPortNum INTEGER

IgmpFilteringProfileEntry  
SEQUENCE    
  igmpFilteringProfileName DisplayString
  igmpFilteringProfileStartAddress IpAddress
  igmpFilteringProfileEndAddress IpAddress
  igmpFilteringProfileRowStatus RowStatus

MvrEntry  
SEQUENCE    
  mvrVlanID INTEGER
  mvrName DisplayString
  mvrMode INTEGER
  mvrRowStatus RowStatus
  mvr8021pPriority INTEGER

MvrPortEntry  
SEQUENCE    
  mvrPortRole INTEGER
  mvrPortTagging EnabledStatus

MvrGroupEntry  
SEQUENCE    
  mvrGroupName DisplayString
  mvrGroupStartAddress IpAddress
  mvrGroupEndAddress IpAddress
  mvrGroupRowStatus RowStatus

ClusterManagerEntry  
SEQUENCE    
  clusterManagerVid INTEGER
  clusterManagerName DisplayString
  clusterManagerRowStatus RowStatus

ClusterMemberEntry  
SEQUENCE    
  clusterMemberMac MacAddress
  clusterMemberName DisplayString
  clusterMemberModel DisplayString
  clusterMemberPassword DisplayString
  clusterMemberRowStatus RowStatus

ClusterCandidateEntry  
SEQUENCE    
  clusterCandidateMac MacAddress
  clusterCandidateName DisplayString
  clusterCandidateModel DisplayString

ClusterStatusMemberEntry  
SEQUENCE    
  clusterStatusMemberMac MacAddress
  clusterStatusMemberName DisplayString
  clusterStatusMemberModel DisplayString
  clusterStatusMemberStatus INTEGER

SysLogTypeEntry  
SEQUENCE    
  sysLogTypeIndex INTEGER
  sysLogTypeName DisplayString
  sysLogTypeState EnabledStatus
  sysLogTypeFacility INTEGER

SysLogServerEntry  
SEQUENCE    
  sysLogServerAddress IpAddress
  sysLogServerLogLevel INTEGER
  sysLogServerRowStatus RowStatus

DiffservMapEntry  
SEQUENCE    
  diffservMapDscp INTEGER
  diffservMapPriority INTEGER

DiffservPortEntry  
SEQUENCE    
  diffservPortState EnabledStatus

ProtoBasedVlanEntry  
SEQUENCE    
  protoBasedVlanPort INTEGER
  protoBasedVlanPacketType INTEGER
  protoBasedVlanEtherType INTEGER
  protoBasedVlanName DisplayString
  protoBasedVlanVid INTEGER
  protoBasedVlanPriority INTEGER
  protoBasedVlanState RowStatus

MrstpBridgeEntry  
SEQUENCE    
  mrstpBridgeIndex INTEGER
  mrstpState INTEGER
  mrstpProtocolSpecification INTEGER
  mrstpPriority INTEGER
  mrstpTimeSinceTopologyChange TimeTicks
  mrstpTopChanges Counter
  mrstpDesignatedRoot BridgeId
  mrstpRootCost INTEGER
  mrstpRootPort INTEGER
  mrstpMaxAge Timeout
  mrstpHelloTime Timeout
  mrstpHoldTime INTEGER
  mrstpForwardDelay Timeout
  mrstpBridgeMaxAge Timeout
  mrstpBridgeHelloTime Timeout
  mrstpBridgeForwardDelay Timeout

MrstpPortEntry  
SEQUENCE    
  mrstpPort INTEGER
  mrstpPortPriority INTEGER
  mrstpPortState INTEGER
  mrstpPortEnable INTEGER
  mrstpPortPathCost INTEGER
  mrstpPortDesignatedRoot BridgeId
  mrstpPortDesignatedCost INTEGER
  mrstpPortDesignatedBridge BridgeId
  mrstpPortDesignatedPort OCTET STRING
  mrstpPortForwardTransitions Counter
  mrstpPortOnBridgeIndex INTEGER
  mrstpPortAdminEdgePort INTEGER
  mrstpPortOperEdgePort INTEGER

DhcpSnpVlanEntry  
SEQUENCE    
  dhcpSnpVlanEntryVid INTEGER
  dhcpSnpVlanEntryEnable EnabledStatus
  dhcpSnpVlanEntryOption82Enable EnabledStatus
  dhcpSnpVlanEntryInfo EnabledStatus

DhcpSnpPortEntry  
SEQUENCE    
  dhcpSnpPortEntryPort INTEGER
  dhcpSnpPortEntryTrust EnabledStatus
  dhcpSnpPortEntryRate INTEGER

DhcpSnpBindEntry  
SEQUENCE    
  dhcpSnpBindEntryMac MacAddress
  dhcpSnpBindEntryVid INTEGER
  dhcpSnpBindEntryIP IpAddress
  dhcpSnpBindEntryLease INTEGER
  dhcpSnpBindEntryType INTEGER
  dhcpSnpBindEntryPort INTEGER

IpsgEntry  
SEQUENCE    
  ipsgEntryMac MacAddress
  ipsgEntryVid INTEGER
  ipsgEntryIp IpAddress
  ipsgEntryLease INTEGER
  ipsgEntryType INTEGER
  ipsgEntryPort INTEGER
  ipsgEntryState RowStatus

ArpInspectVlanEntry  
SEQUENCE    
  arpInspectVlanVid INTEGER
  arpInspectVlanLog INTEGER
  arpInspectVlanStatus INTEGER

ArpInspectPortEntry  
SEQUENCE    
  arpInspectPortIndex INTEGER
  arpInspectPortTrust INTEGER
  arpInspectPortRate INTEGER
  arpInspectPortInterval INTEGER

ArpInspectFilterEntry  
SEQUENCE    
  arpInspectFilterMac MacAddress
  arpInspectFilterVid INTEGER
  arpInspectFilterPort INTEGER
  arpInspectFilterExpiry INTEGER
  arpInspectFilterReason INTEGER
  arpInspectFilterRowStatus RowStatus

ArpInspectLogEntry  
SEQUENCE    
  arpInspectLogMac MacAddress
  arpInspectLogVid INTEGER
  arpInspectLogPort INTEGER
  arpInspectLogIp IpAddress
  arpInspectLogNumPkt INTEGER
  arpInspectLogReason INTEGER
  arpInspectLogTime DateAndTime

ArpInspectStatisticsEntry  
SEQUENCE    
  arpInspectStatisticsVid INTEGER
  arpInspectStatisticsReceived Counter
  arpInspectStatisticsRequest Counter
  arpInspectStatisticsReply Counter
  arpInspectStatisticsForward Counter
  arpInspectStatisticsDrop Counter
  arpInspectStatisticsClear EnabledStatus

TrTCMPortEntry  
SEQUENCE    
  trTCMPortState EnabledStatus
  trTCMPortCIR INTEGER
  trTCMPortPIR INTEGER
  trTCMPortDscpProfile DisplayString

TrTCMDscpProfileEntry  
SEQUENCE    
  trTCMDscpProfileDscpName DisplayString
  trTCMDscpProfileDscpGreen INTEGER
  trTCMDscpProfileDscpYellow INTEGER
  trTCMDscpProfileDscpRed INTEGER
  trTCMDscpProfileDscpRowstatus RowStatus

LoopGuardPortEntry  
SEQUENCE    
  loopGuardPortState EnabledStatus

SubnetBasedVlanEntry  
SEQUENCE    
  subnetBasedVlanSrcIp IpAddress
  subnetBasedVlanSrcMaskBit INTEGER
  subnetBasedVlanName DisplayString
  subnetBasedVlanVid INTEGER
  subnetBasedVlanPriority INTEGER
  subnetBasedVlanEntryState RowStatus

MacAuthenticationPortEntry  
SEQUENCE    
  macAuthenticationPortState EnabledStatus

MstiOrCistInstanceIndex  
This textual convention is an extension of the MstiInstanceIndex convention. This extension permits the additional value of zero, which means Common and Internal Spanning Tree (CIST).
TEXTUAL-CONVENTION    
  Integer32 0..16  

MstMapEntry  
SEQUENCE    
  mstMapIndex MstiOrCistInstanceIndex
  mstMapVlans1k OCTET STRING
  mstMapVlans2k OCTET STRING
  mstMapVlans3k OCTET STRING
  mstMapVlans4k OCTET STRING
  mstMapRowStatus RowStatus

MstVlanEntry  
SEQUENCE    
  mstVlanIndex INTEGER
  mstVlanMstIndex MstiOrCistInstanceIndex

MstpPortEntry  
SEQUENCE    
  mstpPortIndex INTEGER
  mstpPortOperEdgePort TruthValue
  mstpPortOperPointToPointMAC TruthValue
  mstpPortAdminEdgePort TruthValue

MstpXstEntry  
SEQUENCE    
  mstpXstId MstiOrCistInstanceIndex
  mstpXstBridgePriority Integer32
  mstpXstBridgeId BridgeId
  mstpXstInternalRootCost Integer32
  mstpXstRootPort INTEGER
  mstpXstTimeSinceTopologyChange TimeTicks
  mstpXstTopologyChangesCount Counter32

MstpXstPortEntry  
SEQUENCE    
  mstpXstPortXstId MstiOrCistInstanceIndex
  mstpXstPortIndex INTEGER
  mstpXstPortEnable EnabledStatus
  mstpXstPortPriority Integer32
  mstpXstPortPathCost INTEGER
  mstpXstPortState INTEGER
  mstpXstPortDesignatedRoot BridgeId
  mstpXstPortDesignatedCost Integer32
  mstpXstPortDesignatedBridge BridgeId
  mstpXstPortDesignatedPort INTEGER

RadiusAuthServerEntry  
SEQUENCE    
  radiusAuthServerIndex INTEGER
  radiusAuthServerIpAddr IpAddress
  radiusAuthServerUdpPort INTEGER
  radiusAuthServerSharedSecret DisplayString

RadiusAcctServerEntry  
SEQUENCE    
  radiusAcctServerIndex INTEGER
  radiusAcctServerIpAddr IpAddress
  radiusAcctServerUdpPort INTEGER
  radiusAcctServerSharedSecret DisplayString

TacacsAuthServerEntry  
SEQUENCE    
  tacacsAuthServerIndex INTEGER
  tacacsAuthServerIpAddr IpAddress
  tacacsAuthServerTcpPort INTEGER
  tacacsAuthServerSharedSecret DisplayString

TacacsAcctServerEntry  
SEQUENCE    
  tacacsAcctServerIndex INTEGER
  tacacsAcctServerIpAddr IpAddress
  tacacsAcctServerTcpPort INTEGER
  tacacsAcctServerSharedSecret DisplayString

AuthenticationTypeEntry  
SEQUENCE    
  authenticationTypeName DisplayString
  authenticationTypeMethodList OCTET STRING

AccountingTypeEntry  
SEQUENCE    
  accountingTypeName DisplayString
  accountingTypeActive EnabledStatus
  accountingTypeBroadcast EnabledStatus
  accountingTypeMode INTEGER
  accountingTypeMethod INTEGER
  accountingTypePrivilege INTEGER

AuthorizationTypeEntry  
SEQUENCE    
  authorizationTypeName DisplayString
  authorizationTypeActive EnabledStatus
  authorizationTypeMethod INTEGER

PortIsolationEntry  
SEQUENCE    
  portIsolationState EnabledStatus

L2ptEntry  
SEQUENCE    
  l2ptProtocolGroup BITS
  l2ptPointToPointProtocolGroup BITS
  l2ptMode INTEGER

VlanMappingPortEntry  
SEQUENCE    
  vlanMappingPortState EnabledStatus

VlanMappingRuleEntry  
SEQUENCE    
  vlanMappingRuleName DisplayString
  vlanMappingRulePort INTEGER
  vlanMappingRuleVid INTEGER
  vlanMappingRuleTransVid INTEGER
  vlanMappingRulePriority INTEGER
  vlanMappingRuleRowStatus RowStatus

TransceiverSerialInfoEntry  
SEQUENCE    
  transceiverSerialInfoEntryPort INTEGER
  transceiverSerialInfoEntryStatus INTEGER
  transceiverSerialInfoEntryVendor DisplayString
  transceiverSerialInfoEntryPartNo DisplayString
  transceiverSerialInfoEntrySerialNo DisplayString
  transceiverSerialInfoEntryRevision DisplayString
  transceiverSerialInfoEntryDateCode DisplayString
  transceiverSerialInfoEntryTransceiver DisplayString

TransceiverDdmInfoEntry  
SEQUENCE    
  transceiverDdmInfoEntryPort INTEGER
  transceiverDdmInfoEntryType INTEGER
  transceiverDdmInfoEntryAlarmMax INTEGER
  transceiverDdmInfoEntryAlarmMin INTEGER
  transceiverDdmInfoEntryWarnMax INTEGER
  transceiverDdmInfoEntryWarnMin INTEGER
  transceiverDdmInfoEntryCurrent INTEGER
  transceiverDdmInfoEntryDescription DisplayString

Dot3OamPortEntry  
SEQUENCE    
  dot3OamFunctionsSupported BITS

Zyswdot1agCfmMepEntry  
SEQUENCE    
  zyswdot1agCfmMepTransmitLbmDataTlvSize Unsigned32

SFlowCollectorEntry  
SEQUENCE    
  sFlowCollectorAddressType InetAddressType
  sFlowCollectorAddress InetAddress
  sFlowCollectorUdpPort Unsigned32
  sFlowCollectorRowStatus RowStatus

SFlowPortEntry  
SEQUENCE    
  sFlowPortState EnabledStatus

SFlowPortCollectorEntry  
SEQUENCE    
  sFlowPortCollectorAddressType InetAddressType
  sFlowPortCollectorAddress InetAddress
  sFlowPortCollectorSampleRate Unsigned32
  sFlowPortCollectorPollInterval Unsigned32
  sFlowPortCollectorRowStatus RowStatus

SysMemoryPoolEntry  
SEQUENCE    
  sysMemoryPoolId Unsigned32
  sysMemoryPoolName OCTET STRING
  sysMemoryPoolTotal Unsigned32
  sysMemoryPoolUsed Unsigned32
  sysMemoryPoolUtil Unsigned32

PppoeIaPortEntry  
SEQUENCE    
  pppoeIaPortEntryPort INTEGER
  pppoeIaPortEntryTrust EnabledStatus
  pppoeIaPortEntryCircuitIDString DisplayString
  pppoeIaPortEntryRemoteIDString DisplayString

PppoeIaVlanEntry  
SEQUENCE    
  pppoeIaVlanEntryVid INTEGER
  pppoeIaVlanEntryCircuitID EnabledStatus
  pppoeIaVlanEntryRemoteID EnabledStatus
  pppoeIaVlanEntryRowStatus RowStatus

PppoeIaPortVlanEntry  
SEQUENCE    
  pppoeIaPortVlanEntryPort INTEGER
  pppoeIaPortVlanEntryVid INTEGER
  pppoeIaPortVlanEntryCircuitIDString DisplayString
  pppoeIaPortVlanEntryRemoteIDString DisplayString
  pppoeIaPortVlanEntryRowStatus RowStatus

ErrdisableRecoveryReasonEntry  
SEQUENCE    
  errdisableRecoveryReason INTEGER
  errdisableRecoveryReasonActive EnabledStatus
  errdisableRecoveryReasonInterval INTEGER

ErrdisableRecoveryIfStatusEntry  
SEQUENCE    
  errdisableRecoveryIfStatusReason INTEGER
  errdisableRecoveryIfStatusPort INTEGER
  errdisableRecoveryIfStatusTimeToRecover INTEGER

ErrdisableDetectReasonEntry  
SEQUENCE    
  errdisableDetectReason INTEGER
  errdisableDetectReasonEnable EnabledStatus
  errdisableDetectReasonMode INTEGER

CPUProtectionEntry  
SEQUENCE    
  cpuProtectionPort INTEGER
  cpuProtectionReason INTEGER
  cpuProtectionRateLimitSet INTEGER

PrivateVLANEntry  
SEQUENCE    
  privateVLANName DisplayString
  privateVLANVid INTEGER
  privateVLANRowStatus RowStatus

GreenEthernetPortEntry  
SEQUENCE    
  greenEthernetPortEeeState EnabledStatus
  greenEthernetPortAutoPowerDownState EnabledStatus

Defined Values

zyxel 1.3.6.1.4.1.890
OBJECT IDENTIFIER    

products 1.3.6.1.4.1.890.1
OBJECT IDENTIFIER    

accessSwitch 1.3.6.1.4.1.890.1.5
OBJECT IDENTIFIER    

esSeries 1.3.6.1.4.1.890.1.5.8
OBJECT IDENTIFIER    

es3500-8pd 1.3.6.1.4.1.890.1.5.8.72
OBJECT IDENTIFIER    

sysInfo 1.3.6.1.4.1.890.1.5.8.72.1
OBJECT IDENTIFIER    

sysSwPlatformMajorVers 1.3.6.1.4.1.890.1.5.8.72.1.1
SW platform major version, e.g. 3.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

sysSwPlatformMinorVers 1.3.6.1.4.1.890.1.5.8.72.1.2
SW platform minor version, e.g. 50.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

sysSwModelString 1.3.6.1.4.1.890.1.5.8.72.1.3
Model letters, e.g. TJ
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

sysSwVersionControlNbr 1.3.6.1.4.1.890.1.5.8.72.1.4
Version control number, e.g. 0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

sysSwDay 1.3.6.1.4.1.890.1.5.8.72.1.5
SW compilation day, e.g. 19.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

sysSwMonth 1.3.6.1.4.1.890.1.5.8.72.1.6
SW compilation month, e.g. 8.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

sysSwYear 1.3.6.1.4.1.890.1.5.8.72.1.7
SW compilation year, e.g. 2008.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

sysHwMajorVers 1.3.6.1.4.1.890.1.5.8.72.1.8
HW major version number, e.g. 1.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

sysHwMinorVers 1.3.6.1.4.1.890.1.5.8.72.1.9
HW minor version number, e.g. 0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

sysSerialNumber 1.3.6.1.4.1.890.1.5.8.72.1.10
Serial number
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

sysSwBootUpImage 1.3.6.1.4.1.890.1.5.8.72.1.11
Current system boot up image, You can change the boot up image of next rebooting by setting sysMgmtBootupImage.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER image-1(1), image-2(2)  

rateLimitSetup 1.3.6.1.4.1.890.1.5.8.72.2
OBJECT IDENTIFIER    

rateLimitState 1.3.6.1.4.1.890.1.5.8.72.2.1
Ingress/egress rate limiting enabled/disabled for the switch.
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnabledStatus  

rateLimitPortTable 1.3.6.1.4.1.890.1.5.8.72.2.2
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RateLimitPortEntry

rateLimitPortEntry 1.3.6.1.4.1.890.1.5.8.72.2.2.1
An entry in rateLimitPortTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RateLimitPortEntry  

rateLimitPortState 1.3.6.1.4.1.890.1.5.8.72.2.2.1.1
Ingress/egress rate limiting enabled/disabled on the port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnabledStatus  

rateLimitPortCommitRate 1.3.6.1.4.1.890.1.5.8.72.2.2.1.2
Commit rate in Kbit/s. The range of FE port is between 0 and 100,000. For GE port, the range is between 0 and 1000,000.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

rateLimitPortPeakRate 1.3.6.1.4.1.890.1.5.8.72.2.2.1.3
Peak rate in Kbit/s. The range of FE port is between 1 and 100,000. For GE port, the range is between 1 and 1000,000.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

rateLimitPortEgrRate 1.3.6.1.4.1.890.1.5.8.72.2.2.1.4
Egress rate in Kbit/s. The range of FE port is between 1 and 100,000. For GE port, the range is between 1 and 1000,000.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

rateLimitPortPeakState 1.3.6.1.4.1.890.1.5.8.72.2.2.1.5
Ingress peak rate limiting enabled/disabled on the port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnabledStatus  

rateLimitPortEgrState 1.3.6.1.4.1.890.1.5.8.72.2.2.1.6
Egress rate limiting enabled/disabled on the port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnabledStatus  

rateLimitPortCommitState 1.3.6.1.4.1.890.1.5.8.72.2.2.1.7
Ingress commit rate limiting enabled/disabled on the port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnabledStatus  

brLimitSetup 1.3.6.1.4.1.890.1.5.8.72.3
OBJECT IDENTIFIER    

brLimitState 1.3.6.1.4.1.890.1.5.8.72.3.1
Broadcast/multicast/DLF rate limiting enabled/disabled for the switch.
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnabledStatus  

brLimitPortTable 1.3.6.1.4.1.890.1.5.8.72.3.2
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    BrLimitPortEntry

brLimitPortEntry 1.3.6.1.4.1.890.1.5.8.72.3.2.1
An entry in brLimitPortTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  BrLimitPortEntry  

brLimitPortBrState 1.3.6.1.4.1.890.1.5.8.72.3.2.1.1
Broadcast rate limiting enabled/disabled on the port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnabledStatus  

brLimitPortBrRate 1.3.6.1.4.1.890.1.5.8.72.3.2.1.2
Allowed broadcast rate in pkts/s. For FE port, the maximum value is 148800. For GE port, the maximum value is 262143.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

brLimitPortMcState 1.3.6.1.4.1.890.1.5.8.72.3.2.1.3
Multicast rate limiting enabled/disabled on the port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnabledStatus  

brLimitPortMcRate 1.3.6.1.4.1.890.1.5.8.72.3.2.1.4
AAllowed mullticast rate in pkts/s. For FE port, the maximum value is 148800. For GE port, the maximum value is 262143.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

brLimitPortDlfState 1.3.6.1.4.1.890.1.5.8.72.3.2.1.5
Destination lookup failure frames rate limiting enabled/disabled on the port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnabledStatus  

brLimitPortDlfRate 1.3.6.1.4.1.890.1.5.8.72.3.2.1.6
Allowed destination lookup failure frames rate in pkts/s. For FE port, the maximum value is 148800. For GE port, the maximum value is 262143.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

portSecuritySetup 1.3.6.1.4.1.890.1.5.8.72.4
OBJECT IDENTIFIER    

portSecurityState 1.3.6.1.4.1.890.1.5.8.72.4.1
Port Security enabled/disabled on the switch.
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnabledStatus  

portSecurityPortTable 1.3.6.1.4.1.890.1.5.8.72.4.2
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PortSecurityPortEntry

portSecurityPortEntry 1.3.6.1.4.1.890.1.5.8.72.4.2.1
An entry in portSecurityPortTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  PortSecurityPortEntry  

portSecurityPortState 1.3.6.1.4.1.890.1.5.8.72.4.2.1.1
Port Security enabled/disabled on the port. Active(1) means this port only accept frames from static MAC addresses that are configured for the port, and dynamic MAC address frames up to the number specified by portSecurityPortCount object.
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnabledStatus  

portSecurityPortLearnState 1.3.6.1.4.1.890.1.5.8.72.4.2.1.2
MAC address learning enabled/disable on the port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnabledStatus  

portSecurityPortCount 1.3.6.1.4.1.890.1.5.8.72.4.2.1.3
Number of (dynamic) MAC addresses that may be learned on the port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

portSecurityMacFreeze 1.3.6.1.4.1.890.1.5.8.72.4.3
This entry is used to execute MacFreeze action to port. It's meaningless while reading this entry.
Status: mandatory Access: read-write
OBJECT-TYPE    
  PortList  

vlanTrunkSetup 1.3.6.1.4.1.890.1.5.8.72.5
OBJECT IDENTIFIER    

vlanTrunkPortTable 1.3.6.1.4.1.890.1.5.8.72.5.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VlanTrunkPortEntry

vlanTrunkPortEntry 1.3.6.1.4.1.890.1.5.8.72.5.1.1
An entry in vlanTrunkPortTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VlanTrunkPortEntry  

vlanTrunkPortState 1.3.6.1.4.1.890.1.5.8.72.5.1.1.1
VlanTrunking enabled/disabled on the port. Active(1) to allow frames belonging to unknown VLAN groups to pass through the switch.
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnabledStatus  

vlanStackSetup 1.3.6.1.4.1.890.1.5.8.72.7
OBJECT IDENTIFIER    

vlanStackState 1.3.6.1.4.1.890.1.5.8.72.7.1
VLAN Stacking enabled/disabled for the switch.
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnabledStatus  

vlanStackPortTable 1.3.6.1.4.1.890.1.5.8.72.7.3
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VlanStackPortEntry

vlanStackPortEntry 1.3.6.1.4.1.890.1.5.8.72.7.3.1
An entry in vlanStackPortTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VlanStackPortEntry  

vlanStackPortMode 1.3.6.1.4.1.890.1.5.8.72.7.3.1.1
Mode of the port. Set Normal to have the switch ignore frames received (or transmitted) on this port with VLAN stacking tags. Anything you configure in SPVID and Priority are ignored. Set Access mode to have the switch add the SP TPID tag to all incoming frames received on this port. Set Access mode for ingress ports at the edge of the service provider's network. Set Tunnel mode (available for Gigabit ports only) for egress ports at the edge of the service provider's network. In order to support VLAN stacking on a port, the port must be able to allow frames of 1526 Bytes (1522 Bytes + 4 Bytes for the second tag) to pass through it. normal (1), Access (2), tunnel (3)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER normal(1), access(2), tunnel(3)  

vlanStackPortVid 1.3.6.1.4.1.890.1.5.8.72.7.3.1.2
VLAN ID used in service provider tag.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

vlanStackPortPrio 1.3.6.1.4.1.890.1.5.8.72.7.3.1.3
Priority value for service provider tag. 0 is the lowest priority level and 7 is the highest.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER prioriry-0(0), prioriry-1(1), prioriry-2(2), prioriry-3(3), prioriry-4(4), prioriry-5(5), prioriry-6(6), prioriry-7(7)  

vlanStackTunnelPortTpid 1.3.6.1.4.1.890.1.5.8.72.7.3.1.4
Tunnel Port TPID in hex format, e.g. 8100.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

selectiveQinQTable 1.3.6.1.4.1.890.1.5.8.72.7.4
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SelectiveQinQEntry

selectiveQinQEntry 1.3.6.1.4.1.890.1.5.8.72.7.4.1
An entry in selective qinq table
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SelectiveQinQEntry  

selectiveQinQName 1.3.6.1.4.1.890.1.5.8.72.7.4.1.1
The name of selective qinq entry
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

selectiveQinQPort 1.3.6.1.4.1.890.1.5.8.72.7.4.1.2
interface port id
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

selectiveQinQCvid 1.3.6.1.4.1.890.1.5.8.72.7.4.1.3
inner vid
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

selectiveQinQSpvid 1.3.6.1.4.1.890.1.5.8.72.7.4.1.4
outer vid
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

selectiveQinQPriority 1.3.6.1.4.1.890.1.5.8.72.7.4.1.5
priority
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER prioriry-0(0), prioriry-1(1), prioriry-2(2), prioriry-3(3), prioriry-4(4), prioriry-5(5), prioriry-6(6), prioriry-7(7)  

selectiveQinQRowStatus 1.3.6.1.4.1.890.1.5.8.72.7.4.1.6
Tok_String
Status: mandatory Access: read-create
OBJECT-TYPE    
  RowStatus  

dot1xSetup 1.3.6.1.4.1.890.1.5.8.72.8
OBJECT IDENTIFIER    

portAuthState 1.3.6.1.4.1.890.1.5.8.72.8.3
802.1x port authentication enabled/disabled for the switch.
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnabledStatus  

portAuthTable 1.3.6.1.4.1.890.1.5.8.72.8.4
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PortAuthEntry

portAuthEntry 1.3.6.1.4.1.890.1.5.8.72.8.4.1
An entry in portAuthTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  PortAuthEntry  

portAuthEntryState 1.3.6.1.4.1.890.1.5.8.72.8.4.1.1
802.1x port authentication enabled or disabled on the port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnabledStatus  

portReAuthEntryState 1.3.6.1.4.1.890.1.5.8.72.8.4.1.2
802.1x port re-authentication enabled or disabled on the port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnabledStatus  

portReAuthEntryTimer 1.3.6.1.4.1.890.1.5.8.72.8.4.1.3
Re-authentication timer in seconds.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

portAuthQuietPeriod 1.3.6.1.4.1.890.1.5.8.72.8.4.1.4
Quiet period in seconds.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

portAuthTxPeriod 1.3.6.1.4.1.890.1.5.8.72.8.4.1.5
Tx period in seconds.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

portAuthSupplicantTimeout 1.3.6.1.4.1.890.1.5.8.72.8.4.1.6
Supplicant Timeout in seconds.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

portAuthMaxRequest 1.3.6.1.4.1.890.1.5.8.72.8.4.1.7
Max request.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

portAuthGuestVlanState 1.3.6.1.4.1.890.1.5.8.72.8.4.1.8
Guest Vlan State.
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnabledStatus  

portAuthGuestVlan 1.3.6.1.4.1.890.1.5.8.72.8.4.1.9
Guest Vlan ID.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

portAuthGuestVlanHostMode 1.3.6.1.4.1.890.1.5.8.72.8.4.1.10
Guest Vlan Host Mode.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

portAuthGuestVlanHostModeMultiSecureNumber 1.3.6.1.4.1.890.1.5.8.72.8.4.1.11
Guest Vlan Host Mode Multi-Secure number.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

hwMonitorInfo 1.3.6.1.4.1.890.1.5.8.72.9
OBJECT IDENTIFIER    

tempTable 1.3.6.1.4.1.890.1.5.8.72.9.2
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TempEntry

tempEntry 1.3.6.1.4.1.890.1.5.8.72.9.2.1
An entry in tempTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  TempEntry  

tempIndex 1.3.6.1.4.1.890.1.5.8.72.9.2.1.1
Index of temperature unit. 1:MAC, 2:CPU, 3:PHY
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER mac(1), cpu(2), phy(3)  

tempCurValue 1.3.6.1.4.1.890.1.5.8.72.9.2.1.2
The current temperature measured at this sensor.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

tempMaxValue 1.3.6.1.4.1.890.1.5.8.72.9.2.1.3
The maximum temperature measured at this sensor.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

tempMinValue 1.3.6.1.4.1.890.1.5.8.72.9.2.1.4
The minimum temperature measured at this sensor.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

tempHighThresh 1.3.6.1.4.1.890.1.5.8.72.9.2.1.5
The upper temperature limit at this sensor.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

tempDescr 1.3.6.1.4.1.890.1.5.8.72.9.2.1.6
'Normal' indicates temperatures below the threshold and 'Error' for those above.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

voltageTable 1.3.6.1.4.1.890.1.5.8.72.9.3
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VoltageEntry

voltageEntry 1.3.6.1.4.1.890.1.5.8.72.9.3.1
An entry in voltageTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  VoltageEntry  

voltageIndex 1.3.6.1.4.1.890.1.5.8.72.9.3.1.1
Index of voltage.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

voltageCurValue 1.3.6.1.4.1.890.1.5.8.72.9.3.1.2
The current voltage reading.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

voltageMaxValue 1.3.6.1.4.1.890.1.5.8.72.9.3.1.3
The maximum voltage measured at this point.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

voltageMinValue 1.3.6.1.4.1.890.1.5.8.72.9.3.1.4
The minimum voltage measured at this point.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

voltageNominalValue 1.3.6.1.4.1.890.1.5.8.72.9.3.1.5
The normal voltage at wchich the switch work.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

voltageLowThresh 1.3.6.1.4.1.890.1.5.8.72.9.3.1.6
The minimum voltage at which the switch should work.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

voltageDescr 1.3.6.1.4.1.890.1.5.8.72.9.3.1.7
'Normal' indicates that the voltage is within an acceptable operating range at this point; otherwise 'Error' is displayed.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

snmpSetup 1.3.6.1.4.1.890.1.5.8.72.10
OBJECT IDENTIFIER    

snmpGetCommunity 1.3.6.1.4.1.890.1.5.8.72.10.1
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

snmpSetCommunity 1.3.6.1.4.1.890.1.5.8.72.10.2
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

snmpTrapCommunity 1.3.6.1.4.1.890.1.5.8.72.10.3
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

snmpTrapDestTable 1.3.6.1.4.1.890.1.5.8.72.10.4
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SnmpTrapDestEntry

snmpTrapDestEntry 1.3.6.1.4.1.890.1.5.8.72.10.4.1
An entry in snmpTrapDestTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SnmpTrapDestEntry  

snmpTrapDestIP 1.3.6.1.4.1.890.1.5.8.72.10.4.1.1
IP address of trap destination.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

snmpTrapDestRowStatus 1.3.6.1.4.1.890.1.5.8.72.10.4.1.2
Tok_String
Status: mandatory Access: read-create
OBJECT-TYPE    
  RowStatus  

snmpTrapDestPort 1.3.6.1.4.1.890.1.5.8.72.10.4.1.3
The UDP port of the trap destination.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

snmpTrapVersion 1.3.6.1.4.1.890.1.5.8.72.10.4.1.4
The SNMP protocol version to send traps.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER v1(0), v2c(1), v3(2)  

snmpTrapUserName 1.3.6.1.4.1.890.1.5.8.72.10.4.1.5
The user name for sending SNMPv3 traps.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

snmpVersion 1.3.6.1.4.1.890.1.5.8.72.10.5
The SNMP version to be used. v3v2c means that the manager can get/set by SNMPv3 and can get by SNMPv2c.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER v2c(0), v3(1), v3v2c(2)  

snmpUserTable 1.3.6.1.4.1.890.1.5.8.72.10.6
A table that contains SNMPv3 user information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SnmpUserEntry

snmpUserEntry 1.3.6.1.4.1.890.1.5.8.72.10.6.1
An entry of snmpUserTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  SnmpUserEntry  

snmpUserName 1.3.6.1.4.1.890.1.5.8.72.10.6.1.1
The user name.
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString  

snmpUserSecurityLevel 1.3.6.1.4.1.890.1.5.8.72.10.6.1.2
The level of security at which SNMP messages can be sent or with which operations are being processed.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER noAuthNoPriv(0), authNoPriv(1), authPriv(2)  

snmpUserAuthProtocol 1.3.6.1.4.1.890.1.5.8.72.10.6.1.3
The type of authentication protocol to be used.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER md5(0), sha(1)  

snmpUserPrivProtocol 1.3.6.1.4.1.890.1.5.8.72.10.6.1.4
The type of privacy protocol to be used.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER des(0), aes(1)  

snmpUserGroup 1.3.6.1.4.1.890.1.5.8.72.10.6.1.5
The group name which this user belongs to.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

snmpTrapGroupTable 1.3.6.1.4.1.890.1.5.8.72.10.7
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SnmpTrapGroupEntry

snmpTrapGroupEntry 1.3.6.1.4.1.890.1.5.8.72.10.7.1
An entry in snmpTrapGroupTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SnmpTrapGroupEntry  

snmpTrapSystemGroup 1.3.6.1.4.1.890.1.5.8.72.10.7.1.1
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  BITS coldStart(0), warmStart(1), temperature(3), voltage(4), reset(5), timeSync(6), intrusionlock(7), loopGuard(13), errdisable(14)  

snmpTrapInterfaceGroup 1.3.6.1.4.1.890.1.5.8.72.10.7.1.2
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  BITS linkup(0), linkdown(1), lldp(3), transceiver-ddm(4)  

snmpTrapAAAGroup 1.3.6.1.4.1.890.1.5.8.72.10.7.1.3
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  BITS authentication(0), accounting(1)  

snmpTrapIPGroup 1.3.6.1.4.1.890.1.5.8.72.10.7.1.4
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  BITS ping(0), traceroute(1)  

snmpTrapSwitchGroup 1.3.6.1.4.1.890.1.5.8.72.10.7.1.5
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  BITS stp(0), mactable(1), rmon(2), cfm(3)  

dateTimeSetup 1.3.6.1.4.1.890.1.5.8.72.11
OBJECT IDENTIFIER    

dateTimeServerType 1.3.6.1.4.1.890.1.5.8.72.11.1
The time service protocol.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), daytime(2), time(3), ntp(4)  

dateTimeServerIP 1.3.6.1.4.1.890.1.5.8.72.11.2
IP address of time server.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

dateTimeZone 1.3.6.1.4.1.890.1.5.8.72.11.3
The time difference between UTC. Ex: +01
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

dateTimeNewDateYear 1.3.6.1.4.1.890.1.5.8.72.11.4
The new date in year.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

dateTimeNewDateMonth 1.3.6.1.4.1.890.1.5.8.72.11.5
The new date in month.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

dateTimeNewDateDay 1.3.6.1.4.1.890.1.5.8.72.11.6
The new date in day.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

dateTimeNewTimeHour 1.3.6.1.4.1.890.1.5.8.72.11.7
The new time in hour.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

dateTimeNewTimeMinute 1.3.6.1.4.1.890.1.5.8.72.11.8
The new time in minute.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

dateTimeNewTimeSecond 1.3.6.1.4.1.890.1.5.8.72.11.9
The new time in second.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

dateTimeDaylightSavingTimeSetup 1.3.6.1.4.1.890.1.5.8.72.11.10
OBJECT IDENTIFIER    

daylightSavingTimeState 1.3.6.1.4.1.890.1.5.8.72.11.10.1
Daylight saving time service enabled/disabled for the switch.
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnabledStatus  

daylightSavingTimeStartDateWeek 1.3.6.1.4.1.890.1.5.8.72.11.10.2
Daylight saving time service start week.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER first(1), second(2), third(3), fourth(4), last(5)  

daylightSavingTimeStartDateDay 1.3.6.1.4.1.890.1.5.8.72.11.10.3
Daylight saving time service start day.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER sunday(0), monday(1), tuesday(2), wednesday(3), thursday(4), friday(5), saturday(6)  

daylightSavingTimeStartDateMonth 1.3.6.1.4.1.890.1.5.8.72.11.10.4
Daylight saving time service start month.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER january(1), february(2), march(3), april(4), may(5), june(6), july(7), august(8), september(9), october(10), november(11), december(12)  

daylightSavingTimeStartDateHour 1.3.6.1.4.1.890.1.5.8.72.11.10.5
Daylight saving time service start time.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

daylightSavingTimeEndDateWeek 1.3.6.1.4.1.890.1.5.8.72.11.10.6
Daylight saving time service end week.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER first(1), second(2), third(3), fourth(4), last(5)  

daylightSavingTimeEndDateDay 1.3.6.1.4.1.890.1.5.8.72.11.10.7
Daylight saving time service end day.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER sunday(0), monday(1), tuesday(2), wednesday(3), thursday(4), friday(5), saturday(6)  

daylightSavingTimeEndDateMonth 1.3.6.1.4.1.890.1.5.8.72.11.10.8
Daylight saving time service end month.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER january(1), february(2), march(3), april(4), may(5), june(6), july(7), august(8), september(9), october(10), november(11), december(12)  

daylightSavingTimeEndDateHour 1.3.6.1.4.1.890.1.5.8.72.11.10.9
Daylight saving time service end time.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

sysMgmt 1.3.6.1.4.1.890.1.5.8.72.12
OBJECT IDENTIFIER    

sysMgmtConfigSave 1.3.6.1.4.1.890.1.5.8.72.12.1
If setting value is given, the variable write index will be set and running-config will be written to the assigned configuration file. If not, running-config will be written to the booting one. Note: This action can access all configuration includes user account and AA configuration.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER config-1(1), config-2(2)  

sysMgmtBootupConfig 1.3.6.1.4.1.890.1.5.8.72.12.2
The setting value (read index) will be written into non-volatile memory. While rebooting, the variable write index is equal to read index initially. You can change the value of write index by CLI / MIB.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER config-1(1), config-2(2)  

sysMgmtReboot 1.3.6.1.4.1.890.1.5.8.72.12.3
Reboot switch from SNMP. 1:Reboot, 0:Nothing
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER nothing(0), reboot(1)  

sysMgmtDefaultConfig 1.3.6.1.4.1.890.1.5.8.72.12.4
Erase running config and reset to default. Note: This action can access all configuration includes user account and AA configuration.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER nothing(0), reset-to-default(1)  

sysMgmtLastActionStatus 1.3.6.1.4.1.890.1.5.8.72.12.5
Display status of last mgmt action.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER none(0), success(1), fail(2)  

sysMgmtSystemStatus 1.3.6.1.4.1.890.1.5.8.72.12.6
This variable indicates the status of the system. The sysMgmtAlarmStatus is a bit map represented a sum, therefore, it can represent multiple defects simultaneously. The sysNoDefect should be set if and only if no other flag is set. The various bit positions are: 0 sysAlarmDetected 1 sysTemperatureError 2 sysFanRPMError 3 sysVoltageRangeError
Status: mandatory Access: read-only
OBJECT-TYPE    
  BITS sysAlarmDetected(0), sysTemperatureError(1), sysFanRPMError(2), sysVoltageRangeError(3)  

sysMgmtCPUUsage 1.3.6.1.4.1.890.1.5.8.72.12.7
Show device CPU load in %, it's the snapshot of CPU load when getting the values.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

sysMgmtBootupImage 1.3.6.1.4.1.890.1.5.8.72.12.8
The setting value (read index) will be written into non-volatile memory. When rebooting, the selected image will be used. You can change the value of write index by CLI / MIB.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER image-1(1), image-2(2)  

sysMgmtCounterReset 1.3.6.1.4.1.890.1.5.8.72.12.9
Reset all port counters.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

sysMgmtTftpServiceSetup 1.3.6.1.4.1.890.1.5.8.72.12.10
OBJECT IDENTIFIER    

sysMgmtTftpServerIp 1.3.6.1.4.1.890.1.5.8.72.12.10.1
IP address of TFTP server
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

sysMgmtTftpRemoteFileName 1.3.6.1.4.1.890.1.5.8.72.12.10.2
The file name that you want to backup to or restore from TFTP server
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

sysMgmtTftpConfigIndex 1.3.6.1.4.1.890.1.5.8.72.12.10.3
Index of system configuration which you want to restore.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER config-1(1), config-2(2)  

sysMgmtTftpAction 1.3.6.1.4.1.890.1.5.8.72.12.10.4
Action of tftp service. 1: Backup running-config to tftp server, 2: Restore config from tftp server, 3: Merge config from tftp server. Note: This action can access all configuration includes user account and AA configuration.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(0), backup-config(1), restore-config(2), merge-config(3)  

sysMgmtTftpActionStatus 1.3.6.1.4.1.890.1.5.8.72.12.10.5
Display status of mgmt action.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER none(0), success(1), fail(2), under-action(3)  

sysMgmtTftpActionPrivilege13 1.3.6.1.4.1.890.1.5.8.72.12.10.113
Action of tftp service. 1: Backup running-config to tftp server, 2: Restore config from tftp server, 3: Merge config from tftp server. Note: This action can access configuration with privilege 13.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(0), backup-config(1), restore-config(2), merge-config(3)  

sysMgmtConfigSavePrivilege13 1.3.6.1.4.1.890.1.5.8.72.12.113
If setting value is given, the variable write index will be set and running-config will be written to the assigned configuration file. If not, running-config will be written to the booting one. Note: This action can access configuration with privilege 13.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER config-1(1), config-2(2)  

sysMgmtDefaultConfigPrivilege13 1.3.6.1.4.1.890.1.5.8.72.12.213
Erase running config and reset to default. Note: This action can access configuration with privilege 13.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER nothing(0), reset-to-default(1)  

layer2Setup 1.3.6.1.4.1.890.1.5.8.72.13
OBJECT IDENTIFIER    

vlanTypeSetup 1.3.6.1.4.1.890.1.5.8.72.13.1
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER dot1Q(1), port-based(2)  

igmpSnoopingStateSetup 1.3.6.1.4.1.890.1.5.8.72.13.2
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnabledStatus  

tagVlanPortIsolationState 1.3.6.1.4.1.890.1.5.8.72.13.3
This setting will also show the result in the portIsolationState
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnabledStatus  

stpState 1.3.6.1.4.1.890.1.5.8.72.13.4
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnabledStatus  

igmpFilteringStateSetup 1.3.6.1.4.1.890.1.5.8.72.13.6
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnabledStatus  

unknownMulticastFrameForwarding 1.3.6.1.4.1.890.1.5.8.72.13.7
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER flooding(1), drop(2)  

multicastGrpHostTimeout 1.3.6.1.4.1.890.1.5.8.72.13.8
Specify host timeout for all multicast groups when the specific port is in auto mode.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

reservedMulticastFrameForwarding 1.3.6.1.4.1.890.1.5.8.72.13.9
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER flooding(1), drop(2)  

igmpsnp8021pPriority 1.3.6.1.4.1.890.1.5.8.72.13.10
Set the 802.1p priority of control messages for igmp-snooping(0~8, 8-No Change)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

igmpsnpVlanMode 1.3.6.1.4.1.890.1.5.8.72.13.11
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER auto(1), fixed(2)  

stpMode 1.3.6.1.4.1.890.1.5.8.72.13.12
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER rstp(1), mrstp(2), mstp(3)  

igmpsnpVlanTable 1.3.6.1.4.1.890.1.5.8.72.13.13
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IgmpsnpVlanEntry

igmpsnpVlanEntry 1.3.6.1.4.1.890.1.5.8.72.13.13.1
An entry in IgmpsnpVlanTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  IgmpsnpVlanEntry  

igmpsnpVid 1.3.6.1.4.1.890.1.5.8.72.13.13.1.1
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

igmpsnpVlanName 1.3.6.1.4.1.890.1.5.8.72.13.13.1.2
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

igmpsnpVlanRowStatus 1.3.6.1.4.1.890.1.5.8.72.13.13.1.3
Tok_String
Status: mandatory Access: read-create
OBJECT-TYPE    
  RowStatus  

igmpsnpQuerierMode 1.3.6.1.4.1.890.1.5.8.72.13.14
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnabledStatus  

ethernetCfmStateSetup 1.3.6.1.4.1.890.1.5.8.72.13.15
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnabledStatus  

lldpStateSetup 1.3.6.1.4.1.890.1.5.8.72.13.16
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnabledStatus  

igmpSnpReportProxySetup 1.3.6.1.4.1.890.1.5.8.72.13.17
IGMP Snooping report-proxy mode
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnabledStatus  

smartIsolationState 1.3.6.1.4.1.890.1.5.8.72.13.18
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnabledStatus  

ipSetup 1.3.6.1.4.1.890.1.5.8.72.14
OBJECT IDENTIFIER    

dnsIpAddress 1.3.6.1.4.1.890.1.5.8.72.14.1
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

inbandIpSetup 1.3.6.1.4.1.890.1.5.8.72.14.3
OBJECT IDENTIFIER    

inbandIpType 1.3.6.1.4.1.890.1.5.8.72.14.3.1
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER dhcp-client(0), static-ip(1)  

inbandVid 1.3.6.1.4.1.890.1.5.8.72.14.3.2
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

inbandStaticIp 1.3.6.1.4.1.890.1.5.8.72.14.3.3
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

inbandStaticSubnetMask 1.3.6.1.4.1.890.1.5.8.72.14.3.4
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

inbandStaticGateway 1.3.6.1.4.1.890.1.5.8.72.14.3.5
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

maxNumOfInbandIp 1.3.6.1.4.1.890.1.5.8.72.14.4
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

inbandIpTable 1.3.6.1.4.1.890.1.5.8.72.14.5
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    InbandIpEntry

inbandIpEntry 1.3.6.1.4.1.890.1.5.8.72.14.5.1
An entry in inbandIpTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  InbandIpEntry  

inbandEntryIp 1.3.6.1.4.1.890.1.5.8.72.14.5.1.1
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

inbandEntrySubnetMask 1.3.6.1.4.1.890.1.5.8.72.14.5.1.2
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

inbandEntryGateway 1.3.6.1.4.1.890.1.5.8.72.14.5.1.3
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

inbandEntryVid 1.3.6.1.4.1.890.1.5.8.72.14.5.1.4
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

inbandEntryManageable 1.3.6.1.4.1.890.1.5.8.72.14.5.1.5
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnabledStatus  

inbandEntryRowStatus 1.3.6.1.4.1.890.1.5.8.72.14.5.1.6
Tok_String
Status: mandatory Access: read-create
OBJECT-TYPE    
  RowStatus  

filterSetup 1.3.6.1.4.1.890.1.5.8.72.15
OBJECT IDENTIFIER    

filterTable 1.3.6.1.4.1.890.1.5.8.72.15.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FilterEntry

filterEntry 1.3.6.1.4.1.890.1.5.8.72.15.1.1
An entry in filterTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  FilterEntry  

filterName 1.3.6.1.4.1.890.1.5.8.72.15.1.1.1
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

filterActionState 1.3.6.1.4.1.890.1.5.8.72.15.1.1.2
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER discard-source(1), discard-destination(2), both(3)  

filterMacAddr 1.3.6.1.4.1.890.1.5.8.72.15.1.1.3
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  MacAddress  

filterVid 1.3.6.1.4.1.890.1.5.8.72.15.1.1.4
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

filterRowStatus 1.3.6.1.4.1.890.1.5.8.72.15.1.1.5
Tok_String
Status: mandatory Access: read-create
OBJECT-TYPE    
  RowStatus  

mirrorSetup 1.3.6.1.4.1.890.1.5.8.72.16
OBJECT IDENTIFIER    

mirrorState 1.3.6.1.4.1.890.1.5.8.72.16.1
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnabledStatus  

mirrorMonitorPort 1.3.6.1.4.1.890.1.5.8.72.16.2
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

mirrorTable 1.3.6.1.4.1.890.1.5.8.72.16.3
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MirrorEntry

mirrorEntry 1.3.6.1.4.1.890.1.5.8.72.16.3.1
An entry in mirrorTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MirrorEntry  

mirrorMirroredState 1.3.6.1.4.1.890.1.5.8.72.16.3.1.1
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnabledStatus  

mirrorDirection 1.3.6.1.4.1.890.1.5.8.72.16.3.1.2
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER ingress(0), egress(1), both(2)  

aggrSetup 1.3.6.1.4.1.890.1.5.8.72.17
OBJECT IDENTIFIER    

aggrState 1.3.6.1.4.1.890.1.5.8.72.17.1
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnabledStatus  

aggrSystemPriority 1.3.6.1.4.1.890.1.5.8.72.17.2
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

aggrGroupTable 1.3.6.1.4.1.890.1.5.8.72.17.3
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AggrGroupEntry

aggrGroupEntry 1.3.6.1.4.1.890.1.5.8.72.17.3.1
An entry in aggrGroupTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AggrGroupEntry  

aggrGroupIndex 1.3.6.1.4.1.890.1.5.8.72.17.3.1.1
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

aggrGroupState 1.3.6.1.4.1.890.1.5.8.72.17.3.1.2
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnabledStatus  

aggrGroupDynamicState 1.3.6.1.4.1.890.1.5.8.72.17.3.1.3
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnabledStatus  

aggrGroupCriteria 1.3.6.1.4.1.890.1.5.8.72.17.3.1.4
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER src-mac(1), dst-mac(2), src-dst-mac(3), src-ip(4), dst-ip(5), src-dst-ip(6)  

aggrPortTable 1.3.6.1.4.1.890.1.5.8.72.17.4
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AggrPortEntry

aggrPortEntry 1.3.6.1.4.1.890.1.5.8.72.17.4.1
An entry in aggrPortTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AggrPortEntry  

aggrPortGroup 1.3.6.1.4.1.890.1.5.8.72.17.4.1.1
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(0), t1(1), t2(2), t3(3), t4(4), t5(5), t6(6), t7(7), t8(8)  

aggrPortDynamicStateTimeout 1.3.6.1.4.1.890.1.5.8.72.17.4.1.2
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

accessCtlSetup 1.3.6.1.4.1.890.1.5.8.72.18
OBJECT IDENTIFIER    

accessCtlTable 1.3.6.1.4.1.890.1.5.8.72.18.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AccessCtlEntry

accessCtlEntry 1.3.6.1.4.1.890.1.5.8.72.18.1.1
An entry in accessCtlTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AccessCtlEntry  

accessCtlService 1.3.6.1.4.1.890.1.5.8.72.18.1.1.1
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER telnet(1), ssh(2), ftp(3), http(4), https(5), icmp(6), snmp(7)  

accessCtlEnable 1.3.6.1.4.1.890.1.5.8.72.18.1.1.2
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnabledStatus  

accessCtlServicePort 1.3.6.1.4.1.890.1.5.8.72.18.1.1.3
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

accessCtlTimeout 1.3.6.1.4.1.890.1.5.8.72.18.1.1.4
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

securedClientTable 1.3.6.1.4.1.890.1.5.8.72.18.2
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SecuredClientEntry

securedClientEntry 1.3.6.1.4.1.890.1.5.8.72.18.2.1
An entry in securedClientTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SecuredClientEntry  

securedClientIndex 1.3.6.1.4.1.890.1.5.8.72.18.2.1.1
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

securedClientEnable 1.3.6.1.4.1.890.1.5.8.72.18.2.1.2
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnabledStatus  

securedClientStartIp 1.3.6.1.4.1.890.1.5.8.72.18.2.1.3
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

securedClientEndIp 1.3.6.1.4.1.890.1.5.8.72.18.2.1.4
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

securedClientService 1.3.6.1.4.1.890.1.5.8.72.18.2.1.5
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  BITS telnet(0), ftp(1), http(2), icmp(3), snmp(4), ssh(5), https(6)  

queuingMethodSetup 1.3.6.1.4.1.890.1.5.8.72.19
OBJECT IDENTIFIER    

portQueuingMethodTable 1.3.6.1.4.1.890.1.5.8.72.19.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PortQueuingMethodEntry

portQueuingMethodEntry 1.3.6.1.4.1.890.1.5.8.72.19.1.1
An entry in portQueuingMethodTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  PortQueuingMethodEntry  

portQueuingMethodQueue 1.3.6.1.4.1.890.1.5.8.72.19.1.1.1
0...7
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

portQueuingMethodWeight 1.3.6.1.4.1.890.1.5.8.72.19.1.1.2
0...15
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

portQueuingMethodMode 1.3.6.1.4.1.890.1.5.8.72.19.1.1.3
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER strictly-priority(0), weighted-fair-scheduling(1), weighted-round-robin(2)  

portQueuingMethodHybridSpqTable 1.3.6.1.4.1.890.1.5.8.72.19.2
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PortQueuingMethodHybridSpqEntry

portQueuingMethodHybridSpqEntry 1.3.6.1.4.1.890.1.5.8.72.19.2.1
An entry in portQueuingMethodTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  PortQueuingMethodHybridSpqEntry  

portQueuingMethodHybridSpq 1.3.6.1.4.1.890.1.5.8.72.19.2.1.1
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(0), q0(1), q1(2), q2(3), q3(4), q4(5), q5(6), q6(7), q7(8)  

dhcpSetup 1.3.6.1.4.1.890.1.5.8.72.20
OBJECT IDENTIFIER    

globalDhcpRelay 1.3.6.1.4.1.890.1.5.8.72.20.1
OBJECT IDENTIFIER    

globalDhcpRelayEnable 1.3.6.1.4.1.890.1.5.8.72.20.1.1
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnabledStatus  

globalDhcpRelayOption82Enable 1.3.6.1.4.1.890.1.5.8.72.20.1.2
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnabledStatus  

globalDhcpRelayInfoEnable 1.3.6.1.4.1.890.1.5.8.72.20.1.3
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnabledStatus  

globalDhcpRelayInfoData 1.3.6.1.4.1.890.1.5.8.72.20.1.4
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

maxNumberOfGlobalDhcpRelayRemoteServer 1.3.6.1.4.1.890.1.5.8.72.20.1.5
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

globalDhcpRelayRemoteServerTable 1.3.6.1.4.1.890.1.5.8.72.20.1.6
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GlobalDhcpRelayRemoteServerEntry

globalDhcpRelayRemoteServerEntry 1.3.6.1.4.1.890.1.5.8.72.20.1.6.1
An entry in globalDhcpRelayRemoteServerTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GlobalDhcpRelayRemoteServerEntry  

globalDhcpRelayRemoteServerIp 1.3.6.1.4.1.890.1.5.8.72.20.1.6.1.1
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

globalDhcpRelayRemoteServerRowStatus 1.3.6.1.4.1.890.1.5.8.72.20.1.6.1.2
Tok_String
Status: mandatory Access: read-create
OBJECT-TYPE    
  RowStatus  

dhcpRelay 1.3.6.1.4.1.890.1.5.8.72.20.2
OBJECT IDENTIFIER    

dhcpRelayInfoData 1.3.6.1.4.1.890.1.5.8.72.20.2.1
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

maxNumberOfDhcpRelay 1.3.6.1.4.1.890.1.5.8.72.20.2.2
The maximum number of DHCP relay entries that can be created. A value of 0 for this object implies that there exists settings for global DHCP relay.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

maxNumberOfDhcpRelayRemoteServer 1.3.6.1.4.1.890.1.5.8.72.20.2.3
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

dhcpRelayTable 1.3.6.1.4.1.890.1.5.8.72.20.2.4
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DhcpRelayEntry

dhcpRelayEntry 1.3.6.1.4.1.890.1.5.8.72.20.2.4.1
An entry in dhcpRelayTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  DhcpRelayEntry  

dhcpRelayOption82Enable 1.3.6.1.4.1.890.1.5.8.72.20.2.4.1.1
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnabledStatus  

dhcpRelayInfoEnable 1.3.6.1.4.1.890.1.5.8.72.20.2.4.1.2
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnabledStatus  

dhcpRelayRemoteServerTable 1.3.6.1.4.1.890.1.5.8.72.20.2.5
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DhcpRelayRemoteServerEntry

dhcpRelayRemoteServerEntry 1.3.6.1.4.1.890.1.5.8.72.20.2.5.1
An entry in dhcpRelayRemoteServerTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  DhcpRelayRemoteServerEntry  

dhcpRelayVid 1.3.6.1.4.1.890.1.5.8.72.20.2.5.1.1
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

dhcpRelayRemoteServerIp 1.3.6.1.4.1.890.1.5.8.72.20.2.5.1.2
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

dhcpRelayRemoteServerRowStatus 1.3.6.1.4.1.890.1.5.8.72.20.2.5.1.3
Tok_String
Status: mandatory Access: read-create
OBJECT-TYPE    
  RowStatus  

staticRouteSetup 1.3.6.1.4.1.890.1.5.8.72.21
OBJECT IDENTIFIER    

maxNumberOfStaticRoutes 1.3.6.1.4.1.890.1.5.8.72.21.1
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

staticRouteTable 1.3.6.1.4.1.890.1.5.8.72.21.2
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    StaticRouteEntry

staticRouteEntry 1.3.6.1.4.1.890.1.5.8.72.21.2.1
An entry in staticRouteTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  StaticRouteEntry  

staticRouteName 1.3.6.1.4.1.890.1.5.8.72.21.2.1.1
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

staticRouteIp 1.3.6.1.4.1.890.1.5.8.72.21.2.1.2
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

staticRouteMask 1.3.6.1.4.1.890.1.5.8.72.21.2.1.3
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

staticRouteGateway 1.3.6.1.4.1.890.1.5.8.72.21.2.1.4
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

staticRouteMetric 1.3.6.1.4.1.890.1.5.8.72.21.2.1.5
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

staticRouteRowStatus 1.3.6.1.4.1.890.1.5.8.72.21.2.1.6
Tok_String
Status: mandatory Access: read-create
OBJECT-TYPE    
  RowStatus  

arpInfo 1.3.6.1.4.1.890.1.5.8.72.22
OBJECT IDENTIFIER    

arpTable 1.3.6.1.4.1.890.1.5.8.72.22.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ArpEntry

arpEntry 1.3.6.1.4.1.890.1.5.8.72.22.1.1
An entry in arpTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  ArpEntry  

arpIndex 1.3.6.1.4.1.890.1.5.8.72.22.1.1.1
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

arpIpAddr 1.3.6.1.4.1.890.1.5.8.72.22.1.1.2
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

arpMacAddr 1.3.6.1.4.1.890.1.5.8.72.22.1.1.3
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  MacAddress  

arpMacVid 1.3.6.1.4.1.890.1.5.8.72.22.1.1.4
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

arpType 1.3.6.1.4.1.890.1.5.8.72.22.1.1.5
1-static, 2-dynamic
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER static(1), dynamic(2)  

portOpModeSetup 1.3.6.1.4.1.890.1.5.8.72.24
OBJECT IDENTIFIER    

portOpModePortTable 1.3.6.1.4.1.890.1.5.8.72.24.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PortOpModePortEntry

portOpModePortEntry 1.3.6.1.4.1.890.1.5.8.72.24.1.1
An entry in portOpModePortTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  PortOpModePortEntry  

portOpModePortSpeedDuplex 1.3.6.1.4.1.890.1.5.8.72.24.1.1.1
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER auto(0), speed-10-half(1), speed-10-full(2), speed-100-half(3), speed-100-full(4), speed-1000-full(5)  

portOpModePortFlowCntl 1.3.6.1.4.1.890.1.5.8.72.24.1.1.2
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER off(0), on(1)  

portOpModePortName 1.3.6.1.4.1.890.1.5.8.72.24.1.1.3
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

portOpModePortModuleType 1.3.6.1.4.1.890.1.5.8.72.24.1.1.4
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER fast-ethernet-10-100(0), gigabit-ethernet-100-1000(1)  

portOpModePortLinkUpType 1.3.6.1.4.1.890.1.5.8.72.24.1.1.5
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER down(0), copper(1), fiber(2)  

portOpModePortIntrusionLock 1.3.6.1.4.1.890.1.5.8.72.24.1.1.6
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnabledStatus  

portOpModePortLBTestStatus 1.3.6.1.4.1.890.1.5.8.72.24.1.1.7
This entry display latest loopback test status of port while performing loopback test.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER none(0), under-testing(1), success(2), fail(3)  

portOpModePortCounterReset 1.3.6.1.4.1.890.1.5.8.72.24.1.1.8
This entry resets port counter.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

portBasedVlanSetup 1.3.6.1.4.1.890.1.5.8.72.25
OBJECT IDENTIFIER    

portBasedVlanPortListTable 1.3.6.1.4.1.890.1.5.8.72.25.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PortBasedVlanPortListEntry

portBasedVlanPortListEntry 1.3.6.1.4.1.890.1.5.8.72.25.1.1
An entry in portBasedVlanPortListTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  PortBasedVlanPortListEntry  

portBasedVlanPortListMembers 1.3.6.1.4.1.890.1.5.8.72.25.1.1.1
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  PortList  

faultMIB 1.3.6.1.4.1.890.1.5.8.72.26
Fault event table definitions
MODULE-IDENTITY    

eventObjects 1.3.6.1.4.1.890.1.5.8.72.26.1
OBJECT IDENTIFIER    

eventTable 1.3.6.1.4.1.890.1.5.8.72.26.1.1
A list of currently active fault events. All faults of normal type regardless of their severity level are recorded in the event table. When a normal type fault is cleared it is deleted from the event table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EventEntry

eventEntry 1.3.6.1.4.1.890.1.5.8.72.26.1.1.1
An entry containing information about an event in the event table.
Status: current Access: not-accessible
OBJECT-TYPE    
  EventEntry  

eventSeqNum 1.3.6.1.4.1.890.1.5.8.72.26.1.1.1.1
This variable represents the sequence number of an event. Sequence number is incremented monotonically starting from 0 until it reaches its maximum and wraps around back to 0. Sequence number is incremented when - the state of a normal type fault is set on (the same sequence number is present in the events table as well as in the trap that is sent to notify about the fault on event) - delta event occurs (sequence number present in trap message) - the state of a normal type fault is set off (sequence number present in trap that is sent to notify for clearing).
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

eventEventId 1.3.6.1.4.1.890.1.5.8.72.26.1.1.1.2
This variable represents the event ID which uniquely identifies the event in the entire system.
Status: current Access: read-only
OBJECT-TYPE    
  EventIdNumber  

eventName 1.3.6.1.4.1.890.1.5.8.72.26.1.1.1.3
This variable represents the name of the event, for example 'Ethernet Link Down'
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..40)  

eventInstanceType 1.3.6.1.4.1.890.1.5.8.72.26.1.1.1.4
This variable represents the type of InstanceId of a particular event in the event table. In brief the instanceType refers to the type of sub-component generating this event in the system, for example switch (5). For more details see the textual conventions section. AFFECTS: eventInstanceId, eventInstanceName
Status: current Access: read-only
OBJECT-TYPE    
  InstanceType  

eventInstanceId 1.3.6.1.4.1.890.1.5.8.72.26.1.1.1.5
This variable represents the InstanceId of a particular event in the event current table. In brief the instanceId refers to the sub-component generating this event in the system, for example '1' for port 1. For more details see the textual conventions section. DEPENDS ON: eventInstanceType
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

eventInstanceName 1.3.6.1.4.1.890.1.5.8.72.26.1.1.1.6
This variable is mainly used to store additional information about the sub-component that is generating an event. For example this field may specify what cooling fan is faulty. DEPENDS ON: eventInstanceType
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

eventSeverity 1.3.6.1.4.1.890.1.5.8.72.26.1.1.1.7
This variable dictates the urgency of action when a event occurs. There are four severity levels - Critical, Major, Minor, and Informational. Critical events are those, which require immediate operator intervention to prevent/reduce system down time. Major events require quick attention and Minor events possibly require some attention. Informational events indicate the occurrence of events that may need to be investigated.
Status: current Access: read-only
OBJECT-TYPE    
  EventSeverity  

eventSetTime 1.3.6.1.4.1.890.1.5.8.72.26.1.1.1.8
This table contains only normal events and this variable represents the time when the event become active, i.e. the number of seconds since Jan 1, 1970 12:00AM.
Status: current Access: read-only
OBJECT-TYPE    
  UtcTimeStamp  

eventDescription 1.3.6.1.4.1.890.1.5.8.72.26.1.1.1.9
This variable contains a description of the event and reasons behind the event. This is a free format alpha-numeric string that is set by the entity generating this event. This variable may be empty if there is no usefull information to report. The maximum length of this string is 255 characters.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..255)  

eventServAffective 1.3.6.1.4.1.890.1.5.8.72.26.1.1.1.10
This variable indicates whether the event is service affective or not
Status: current Access: read-only
OBJECT-TYPE    
  EventServiceAffective  

eventInstanceIdNumber 1.3.6.1.4.1.890.1.5.8.72.26.1.1.1.11
This variable represents the InstanceId of a particular event in the event current table. In brief the instanceId refers to the sub-component generating this event in the system, for example '1' for port 1. For more details see the textual conventions section. DEPENDS ON: eventInstanceType
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

faultTrapsMIB 1.3.6.1.4.1.890.1.5.8.72.27
Fault event trap definitions
MODULE-IDENTITY    

trapInfoObjects 1.3.6.1.4.1.890.1.5.8.72.27.1
OBJECT IDENTIFIER    

trapNotifications 1.3.6.1.4.1.890.1.5.8.72.27.2
OBJECT IDENTIFIER    

trapRefSeqNum 1.3.6.1.4.1.890.1.5.8.72.27.1.1
Indicates the former sequence number of a cleared event in the event table. Not intended to read but only used in trap notifications.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

trapPersistence 1.3.6.1.4.1.890.1.5.8.72.27.1.2
Indicates whether the event is delta (automatically and immediately cleared) or normal (not automatically cleared). Not intended to read but only used in trap notifications.
Status: current Access: read-only
OBJECT-TYPE    
  EventPersistence  

trapSenderNodeId 1.3.6.1.4.1.890.1.5.8.72.27.1.3
Represents the node ID of the sending network element. If not supported should be set to 0. Not intended to read but only used in trap notifications.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

trapSenderStatus 1.3.6.1.4.1.890.1.5.8.72.27.1.4
Represents the trap status. 0 means cleared, 1 means happened.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

eventOnTrap 1.3.6.1.4.1.890.1.5.8.72.27.2.1
This trap is used to inform network management system that a delta fault event (events that are automatically cleared) has occured or a normal fault event (not automatically cleared) state has been set on. Objects are used as follows: - eventSeqNum is the sequence number of the event. For normal type of events must equal to the sequence number of the event in the events table. - eventEventId specifies what fault event has occured. - eventName specifies the name of the fault event. - eventSetTime indicates when fault event has occured (delta events) or when fault has been set on (normal events). - eventSeverity reports the severity level of the event. - eventInstanceType indicates what kind of object is faulty. - eventInstanceId specifies what instance is faulty. - eventInstanceName may contain textual description for the faulty object. - eventServAffective specifies whether the event is immediately service affcetive. - eventDescription reports possible additional information about the event. - trapPersistence tells whether this event is a delta or normal event. - trapSenderNodeId specifies the node ID of the sending network element if configuring it is supported for the network element, otherwise 0. - trapSenderStatus specifes the trap status. - sysObjectID specifies what kind of equipment reports the fault event. For more information see the eventTable specification
Status: current Access: read-only
NOTIFICATION-TYPE    

eventClearedTrap 1.3.6.1.4.1.890.1.5.8.72.27.2.2
This trap is used to inform network management system that a normal type fault event has been cleared (state set off). Objects are used as follows: - eventSeqNum is the sequence number of the this clearing event. Note that the sequence number of the cleared event is reported in the trapRefSeqNum object. - eventEventId specifies what event has been cleared. - eventSetTime indicates when fault event has been cleared. - eventInstanceType indicates what kind of object has been faulty. - eventInstanceId specifies what instance has been faulty. - trapRefSeqNum specifies the sequence number of the cleared event (i.e. the sequence number was assigned for the event in the events table). - trapSenderNodeId specifies the node ID of the sending network element if configuring it is supported for the network element, otherwise 0. - sysObjectID specifies what kind of equipment reports the clearing event. For more information see the eventTable specification
Status: current Access: read-only
NOTIFICATION-TYPE    

multicastPortSetup 1.3.6.1.4.1.890.1.5.8.72.28
OBJECT IDENTIFIER    

multicastPortTable 1.3.6.1.4.1.890.1.5.8.72.28.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MulticastPortEntry

multicastPortEntry 1.3.6.1.4.1.890.1.5.8.72.28.1.1
An entry in multicastPortTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MulticastPortEntry  

multicastPortMaxGroupLimited 1.3.6.1.4.1.890.1.5.8.72.28.1.1.2
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnabledStatus  

multicastPortMaxOfGroup 1.3.6.1.4.1.890.1.5.8.72.28.1.1.3
0..255
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

multicastPortIgmpFilteringProfile 1.3.6.1.4.1.890.1.5.8.72.28.1.1.4
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

multicastPortQuerierMode 1.3.6.1.4.1.890.1.5.8.72.28.1.1.5
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER auto(1), fixed(2), edge(3)  

multicastPortThrottlingAction 1.3.6.1.4.1.890.1.5.8.72.28.1.1.6
Specify throttling action for each port
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER deny(1), replace(2)  

multicastPortLeaveMode 1.3.6.1.4.1.890.1.5.8.72.28.1.1.7
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER normal(0), immediate(1), fast(2)  

multicastPortLeaveTimeout 1.3.6.1.4.1.890.1.5.8.72.28.1.1.8
200..6348800
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

multicastPortFastLeaveTimeout 1.3.6.1.4.1.890.1.5.8.72.28.1.1.9
200..6348800
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

multicastStatus 1.3.6.1.4.1.890.1.5.8.72.29
OBJECT IDENTIFIER    

multicastStatusTable 1.3.6.1.4.1.890.1.5.8.72.29.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MulticastStatusEntry

multicastStatusEntry 1.3.6.1.4.1.890.1.5.8.72.29.1.1
An entry in multicastStatusTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MulticastStatusEntry  

multicastStatusIndex 1.3.6.1.4.1.890.1.5.8.72.29.1.1.1
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

multicastStatusVlanID 1.3.6.1.4.1.890.1.5.8.72.29.1.1.2
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

multicastStatusPort 1.3.6.1.4.1.890.1.5.8.72.29.1.1.3
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

multicastStatusGroup 1.3.6.1.4.1.890.1.5.8.72.29.1.1.4
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

igmpSnpCountTable 1.3.6.1.4.1.890.1.5.8.72.29.2
A count table of igmp query/report/leave message.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IgmpSnpCountEntry

igmpSnpCountEntry 1.3.6.1.4.1.890.1.5.8.72.29.2.1
An entry in igmpSnpCountTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  IgmpSnpCountEntry  

igmpSnpCountIndex 1.3.6.1.4.1.890.1.5.8.72.29.2.1.1
Index of IgmpCountEntry. 0 means total count in whole system
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

igmpSnpV2CountQueryRx 1.3.6.1.4.1.890.1.5.8.72.29.2.1.2
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

igmpSnpV2CountReportRx 1.3.6.1.4.1.890.1.5.8.72.29.2.1.3
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

igmpSnpV2CountLeaveRx 1.3.6.1.4.1.890.1.5.8.72.29.2.1.4
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

igmpSnpV2CountQueryRxDrop 1.3.6.1.4.1.890.1.5.8.72.29.2.1.5
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

igmpSnpV2CountReportRxDrop 1.3.6.1.4.1.890.1.5.8.72.29.2.1.6
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

igmpSnpV2CountLeaveRxDrop 1.3.6.1.4.1.890.1.5.8.72.29.2.1.7
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

igmpSnpV2CountQueryTx 1.3.6.1.4.1.890.1.5.8.72.29.2.1.8
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

igmpSnpV2CountReportTx 1.3.6.1.4.1.890.1.5.8.72.29.2.1.9
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

igmpSnpV2CountLeaveTx 1.3.6.1.4.1.890.1.5.8.72.29.2.1.10
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

igmpSnpV3CountQueryRx 1.3.6.1.4.1.890.1.5.8.72.29.2.1.11
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

igmpSnpV3CountReportRx 1.3.6.1.4.1.890.1.5.8.72.29.2.1.12
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

igmpSnpV3CountQueryRxDrop 1.3.6.1.4.1.890.1.5.8.72.29.2.1.13
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

igmpSnpV3CountReportRxDrop 1.3.6.1.4.1.890.1.5.8.72.29.2.1.14
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

igmpSnpV3CountQueryTx 1.3.6.1.4.1.890.1.5.8.72.29.2.1.15
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

igmpSnpV3CountReportTx 1.3.6.1.4.1.890.1.5.8.72.29.2.1.16
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

multicastVlanStatusTable 1.3.6.1.4.1.890.1.5.8.72.29.3
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MulticastVlanStatusEntry

multicastVlanStatusEntry 1.3.6.1.4.1.890.1.5.8.72.29.3.1
An entry in multicastVlanStatusTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MulticastVlanStatusEntry  

multicastVlanStatusVlanID 1.3.6.1.4.1.890.1.5.8.72.29.3.1.1
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

multicastVlanStatusType 1.3.6.1.4.1.890.1.5.8.72.29.3.1.2
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER dynamic(1), mvr(2), static(3)  

multicastVlanQueryPort 1.3.6.1.4.1.890.1.5.8.72.29.3.1.3
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  PortList  

igmpSnpCountVlanTable 1.3.6.1.4.1.890.1.5.8.72.29.4
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IgmpSnpCountVlanEntry

igmpSnpCountVlanEntry 1.3.6.1.4.1.890.1.5.8.72.29.4.1
An entry in igmpGroupVlanStatus.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  IgmpSnpCountVlanEntry  

igmpSnpCountVlanIndex 1.3.6.1.4.1.890.1.5.8.72.29.4.1.1
Input vlan
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

igmpSnpV2CountVlanQueryRx 1.3.6.1.4.1.890.1.5.8.72.29.4.1.2
show igmpsnp Query Rx counters for vlan
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

igmpSnpV2CountVlanReportRx 1.3.6.1.4.1.890.1.5.8.72.29.4.1.3
show igmpsnp Report Rx counters for vlan
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

igmpSnpV2CountVlanLeaveRx 1.3.6.1.4.1.890.1.5.8.72.29.4.1.4
show igmpsnp Leave Rx counters for vlan
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

igmpSnpV2CountVlanQueryRxDrop 1.3.6.1.4.1.890.1.5.8.72.29.4.1.5
show igmpsnp Query Rx Error counters for vlan
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

igmpSnpV2CountVlanReportRxDrop 1.3.6.1.4.1.890.1.5.8.72.29.4.1.6
show igmpsnp Report Rx Error counters for vlan
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

igmpSnpV2CountVlanLeaveRxDrop 1.3.6.1.4.1.890.1.5.8.72.29.4.1.7
show igmpsnp Leave Rx Error counters for vlan
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

igmpSnpV2CountVlanQueryTx 1.3.6.1.4.1.890.1.5.8.72.29.4.1.8
show igmpsnp Query Tx counters for vlan
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

igmpSnpV2CountVlanReportTx 1.3.6.1.4.1.890.1.5.8.72.29.4.1.9
show igmpsnp Report Tx counters for vlan
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

igmpSnpV2CountVlanLeaveTx 1.3.6.1.4.1.890.1.5.8.72.29.4.1.10
show igmpsnp Leave Tx counters for vlan
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

igmpSnpV3CountVlanQueryRx 1.3.6.1.4.1.890.1.5.8.72.29.4.1.11
show igmpsnp Query Rx counters for vlan
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

igmpSnpV3CountVlanReportRx 1.3.6.1.4.1.890.1.5.8.72.29.4.1.12
show igmpsnp Report Rx counters for vlan
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

igmpSnpV3CountVlanQueryRxDrop 1.3.6.1.4.1.890.1.5.8.72.29.4.1.13
show igmpsnp Query Rx Error counters for vlan
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

igmpSnpV3CountVlanReportRxDrop 1.3.6.1.4.1.890.1.5.8.72.29.4.1.14
show igmpsnp Report Rx Error counters for vlan
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

igmpSnpV3CountVlanQueryTx 1.3.6.1.4.1.890.1.5.8.72.29.4.1.15
show igmpsnp Query Tx counters for vlan
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

igmpSnpV3CountVlanReportTx 1.3.6.1.4.1.890.1.5.8.72.29.4.1.16
show igmpsnp Report Tx counters for vlan
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

igmpSnpCountPortTable 1.3.6.1.4.1.890.1.5.8.72.29.5
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IgmpSnpCountPortEntry

igmpSnpCountPortEntry 1.3.6.1.4.1.890.1.5.8.72.29.5.1
An entry in igmpSnpCountPortStatus.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  IgmpSnpCountPortEntry  

igmpSnpV2CountPortQueryRx 1.3.6.1.4.1.890.1.5.8.72.29.5.1.1
show igmpsnp Query Rx counters for port
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

igmpSnpV2CountPortReportRx 1.3.6.1.4.1.890.1.5.8.72.29.5.1.2
show igmpsnp Report Rx counters for port
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

igmpSnpV2CountPortLeaveRx 1.3.6.1.4.1.890.1.5.8.72.29.5.1.3
show igmpsnp Leave Rx counters for port
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

igmpSnpV2CountPortReportRxDrop 1.3.6.1.4.1.890.1.5.8.72.29.5.1.4
show igmpsnp Report Rx Error counters for port
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

igmpSnpV2CountPortLeaveRxDrop 1.3.6.1.4.1.890.1.5.8.72.29.5.1.5
show igmpsnp Leave Rx Error counters for port
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

igmpSnpV2CountPortReportTx 1.3.6.1.4.1.890.1.5.8.72.29.5.1.6
show igmpsnp Report Tx counters for port
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

igmpSnpV2CountPortLeaveTx 1.3.6.1.4.1.890.1.5.8.72.29.5.1.7
show igmpsnp Leave Tx counters for port
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

igmpSnpV3CountPortQueryRx 1.3.6.1.4.1.890.1.5.8.72.29.5.1.8
show igmpsnp Query Rx counters for port
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

igmpSnpV3CountPortReportRx 1.3.6.1.4.1.890.1.5.8.72.29.5.1.9
show igmpsnp Report Rx counters for port
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

igmpSnpV3CountPortReportRxDrop 1.3.6.1.4.1.890.1.5.8.72.29.5.1.10
show igmpsnp Report Rx Error counters for port
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

igmpSnpV3CountPortReportTx 1.3.6.1.4.1.890.1.5.8.72.29.5.1.11
show igmpsnp Report Tx counters for port
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

igmpSnpGroupCountStatus 1.3.6.1.4.1.890.1.5.8.72.29.6
OBJECT IDENTIFIER    

igmpSnpGroupCountNum 1.3.6.1.4.1.890.1.5.8.72.29.6.1
Show total IGMP snooping group number
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

igmpSnpGroupCountVlanTable 1.3.6.1.4.1.890.1.5.8.72.29.6.2
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IgmpSnpGroupCountVlanEntry

igmpSnpGroupCountVlanEntry 1.3.6.1.4.1.890.1.5.8.72.29.6.2.1
An entry in igmpSnpGroupVlanStatus.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  IgmpSnpGroupCountVlanEntry  

igmpSnpGroupCountVlanIndex 1.3.6.1.4.1.890.1.5.8.72.29.6.2.1.1
Show IGMP snooping group index for vlan
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

igmpSnpGroupCountVlanNum 1.3.6.1.4.1.890.1.5.8.72.29.6.2.1.2
Show IGMP snooping group number for vlan
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

igmpSnpGroupCountPortTable 1.3.6.1.4.1.890.1.5.8.72.29.6.3
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IgmpSnpGroupCountPortEntry

igmpSnpGroupCountPortEntry 1.3.6.1.4.1.890.1.5.8.72.29.6.3.1
An entry in igmpGroupCountPortStatus.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  IgmpSnpGroupCountPortEntry  

igmpSnpGroupCountPortNum 1.3.6.1.4.1.890.1.5.8.72.29.6.3.1.1
Show IGMP snooping group number for port
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

igmpFilteringProfileSetup 1.3.6.1.4.1.890.1.5.8.72.30
OBJECT IDENTIFIER    

igmpFilteringMaxNumberOfProfile 1.3.6.1.4.1.890.1.5.8.72.30.1
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

igmpFilteringProfileTable 1.3.6.1.4.1.890.1.5.8.72.30.2
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IgmpFilteringProfileEntry

igmpFilteringProfileEntry 1.3.6.1.4.1.890.1.5.8.72.30.2.1
An entry in igmpFilteringProfileTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  IgmpFilteringProfileEntry  

igmpFilteringProfileName 1.3.6.1.4.1.890.1.5.8.72.30.2.1.1
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

igmpFilteringProfileStartAddress 1.3.6.1.4.1.890.1.5.8.72.30.2.1.2
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

igmpFilteringProfileEndAddress 1.3.6.1.4.1.890.1.5.8.72.30.2.1.3
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

igmpFilteringProfileRowStatus 1.3.6.1.4.1.890.1.5.8.72.30.2.1.4
Tok_String
Status: mandatory Access: read-create
OBJECT-TYPE    
  RowStatus  

mvrSetup 1.3.6.1.4.1.890.1.5.8.72.31
OBJECT IDENTIFIER    

maxNumberOfMVR 1.3.6.1.4.1.890.1.5.8.72.31.1
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

mvrTable 1.3.6.1.4.1.890.1.5.8.72.31.2
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MvrEntry

mvrEntry 1.3.6.1.4.1.890.1.5.8.72.31.2.1
An entry in mvrTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MvrEntry  

mvrVlanID 1.3.6.1.4.1.890.1.5.8.72.31.2.1.1
1..4094
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

mvrName 1.3.6.1.4.1.890.1.5.8.72.31.2.1.2
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

mvrMode 1.3.6.1.4.1.890.1.5.8.72.31.2.1.3
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER dynamic(0), compatible(1)  

mvrRowStatus 1.3.6.1.4.1.890.1.5.8.72.31.2.1.4
Tok_String
Status: mandatory Access: read-create
OBJECT-TYPE    
  RowStatus  

mvr8021pPriority 1.3.6.1.4.1.890.1.5.8.72.31.2.1.5
Set the 802.1p priority of control messages within MVR (0~7)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

mvrPortTable 1.3.6.1.4.1.890.1.5.8.72.31.3
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MvrPortEntry

mvrPortEntry 1.3.6.1.4.1.890.1.5.8.72.31.3.1
An entry in mvrPortTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MvrPortEntry  

mvrPortRole 1.3.6.1.4.1.890.1.5.8.72.31.3.1.1
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), source-port(2), receiver-port(3)  

mvrPortTagging 1.3.6.1.4.1.890.1.5.8.72.31.3.1.2
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnabledStatus  

maxNumberOfMvrGroup 1.3.6.1.4.1.890.1.5.8.72.31.4
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

mvrGroupTable 1.3.6.1.4.1.890.1.5.8.72.31.5
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MvrGroupEntry

mvrGroupEntry 1.3.6.1.4.1.890.1.5.8.72.31.5.1
An entry in mvrGroupTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MvrGroupEntry  

mvrGroupName 1.3.6.1.4.1.890.1.5.8.72.31.5.1.1
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

mvrGroupStartAddress 1.3.6.1.4.1.890.1.5.8.72.31.5.1.2
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

mvrGroupEndAddress 1.3.6.1.4.1.890.1.5.8.72.31.5.1.3
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

mvrGroupRowStatus 1.3.6.1.4.1.890.1.5.8.72.31.5.1.4
Tok_String
Status: mandatory Access: read-create
OBJECT-TYPE    
  RowStatus  

clusterSetup 1.3.6.1.4.1.890.1.5.8.72.32
OBJECT IDENTIFIER    

clusterManager 1.3.6.1.4.1.890.1.5.8.72.32.1
OBJECT IDENTIFIER    

clusterMaxNumOfManager 1.3.6.1.4.1.890.1.5.8.72.32.1.1
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

clusterManagerTable 1.3.6.1.4.1.890.1.5.8.72.32.1.2
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ClusterManagerEntry

clusterManagerEntry 1.3.6.1.4.1.890.1.5.8.72.32.1.2.1
An entry in clusterManagerTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  ClusterManagerEntry  

clusterManagerVid 1.3.6.1.4.1.890.1.5.8.72.32.1.2.1.1
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

clusterManagerName 1.3.6.1.4.1.890.1.5.8.72.32.1.2.1.2
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

clusterManagerRowStatus 1.3.6.1.4.1.890.1.5.8.72.32.1.2.1.3
Tok_String
Status: mandatory Access: read-create
OBJECT-TYPE    
  RowStatus  

clusterMembers 1.3.6.1.4.1.890.1.5.8.72.32.2
OBJECT IDENTIFIER    

clusterMaxNumOfMember 1.3.6.1.4.1.890.1.5.8.72.32.2.1
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

clusterMemberTable 1.3.6.1.4.1.890.1.5.8.72.32.2.2
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ClusterMemberEntry

clusterMemberEntry 1.3.6.1.4.1.890.1.5.8.72.32.2.2.1
An entry in clusterMemberTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  ClusterMemberEntry  

clusterMemberMac 1.3.6.1.4.1.890.1.5.8.72.32.2.2.1.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MacAddress  

clusterMemberName 1.3.6.1.4.1.890.1.5.8.72.32.2.2.1.2
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

clusterMemberModel 1.3.6.1.4.1.890.1.5.8.72.32.2.2.1.3
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

clusterMemberPassword 1.3.6.1.4.1.890.1.5.8.72.32.2.2.1.4
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

clusterMemberRowStatus 1.3.6.1.4.1.890.1.5.8.72.32.2.2.1.5
Tok_String
Status: mandatory Access: read-create
OBJECT-TYPE    
  RowStatus  

clusterCandidates 1.3.6.1.4.1.890.1.5.8.72.32.3
OBJECT IDENTIFIER    

clusterCandidateTable 1.3.6.1.4.1.890.1.5.8.72.32.3.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ClusterCandidateEntry

clusterCandidateEntry 1.3.6.1.4.1.890.1.5.8.72.32.3.1.1
An entry in clusterCandidateTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  ClusterCandidateEntry  

clusterCandidateMac 1.3.6.1.4.1.890.1.5.8.72.32.3.1.1.1
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  MacAddress  

clusterCandidateName 1.3.6.1.4.1.890.1.5.8.72.32.3.1.1.2
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

clusterCandidateModel 1.3.6.1.4.1.890.1.5.8.72.32.3.1.1.3
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

clusterStatus 1.3.6.1.4.1.890.1.5.8.72.32.4
OBJECT IDENTIFIER    

clusterStatusRole 1.3.6.1.4.1.890.1.5.8.72.32.4.1
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER none(0), manager(1), member(2)  

clusterStatusManager 1.3.6.1.4.1.890.1.5.8.72.32.4.2
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

clsuterStatusMaxNumOfMember 1.3.6.1.4.1.890.1.5.8.72.32.4.3
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

clusterStatusMemberTable 1.3.6.1.4.1.890.1.5.8.72.32.4.4
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ClusterStatusMemberEntry

clusterStatusMemberEntry 1.3.6.1.4.1.890.1.5.8.72.32.4.4.1
An entry in clusterStatusMemberTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  ClusterStatusMemberEntry  

clusterStatusMemberMac 1.3.6.1.4.1.890.1.5.8.72.32.4.4.1.1
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  MacAddress  

clusterStatusMemberName 1.3.6.1.4.1.890.1.5.8.72.32.4.4.1.2
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

clusterStatusMemberModel 1.3.6.1.4.1.890.1.5.8.72.32.4.4.1.3
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

clusterStatusMemberStatus 1.3.6.1.4.1.890.1.5.8.72.32.4.4.1.4
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER error(0), online(1), offline(2)  

sysLogSetup 1.3.6.1.4.1.890.1.5.8.72.33
OBJECT IDENTIFIER    

sysLogState 1.3.6.1.4.1.890.1.5.8.72.33.1
sysLog enabled/disabled for the switch.
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnabledStatus  

sysLogTypeTable 1.3.6.1.4.1.890.1.5.8.72.33.2
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SysLogTypeEntry

sysLogTypeEntry 1.3.6.1.4.1.890.1.5.8.72.33.2.1
An entry in sysLogTypeTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SysLogTypeEntry  

sysLogTypeIndex 1.3.6.1.4.1.890.1.5.8.72.33.2.1.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER  

sysLogTypeName 1.3.6.1.4.1.890.1.5.8.72.33.2.1.2
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

sysLogTypeState 1.3.6.1.4.1.890.1.5.8.72.33.2.1.3
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnabledStatus  

sysLogTypeFacility 1.3.6.1.4.1.890.1.5.8.72.33.2.1.4
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER local-user0(0), local-user1(1), local-user2(2), local-user3(3), local-user4(4), local-user5(5), local-user6(6), local-user7(7)  

sysLogServerTable 1.3.6.1.4.1.890.1.5.8.72.33.3
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SysLogServerEntry

sysLogServerEntry 1.3.6.1.4.1.890.1.5.8.72.33.3.1
An entry in sysLogServerTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SysLogServerEntry  

sysLogServerAddress 1.3.6.1.4.1.890.1.5.8.72.33.3.1.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  IpAddress  

sysLogServerLogLevel 1.3.6.1.4.1.890.1.5.8.72.33.3.1.2
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER level0(0), level0-1(1), level0-2(2), level0-3(3), level0-4(4), level0-5(5), level0-6(6), level0-7(7)  

sysLogServerRowStatus 1.3.6.1.4.1.890.1.5.8.72.33.3.1.3
Tok_String
Status: mandatory Access: read-create
OBJECT-TYPE    
  RowStatus  

diffservSetup 1.3.6.1.4.1.890.1.5.8.72.34
OBJECT IDENTIFIER    

diffservState 1.3.6.1.4.1.890.1.5.8.72.34.1
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnabledStatus  

diffservMapTable 1.3.6.1.4.1.890.1.5.8.72.34.2
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DiffservMapEntry

diffservMapEntry 1.3.6.1.4.1.890.1.5.8.72.34.2.1
An entry in diffservMapTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  DiffservMapEntry  

diffservMapDscp 1.3.6.1.4.1.890.1.5.8.72.34.2.1.1
0-63
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

diffservMapPriority 1.3.6.1.4.1.890.1.5.8.72.34.2.1.2
0-7
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

diffservPortTable 1.3.6.1.4.1.890.1.5.8.72.34.3
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DiffservPortEntry

diffservPortEntry 1.3.6.1.4.1.890.1.5.8.72.34.3.1
An entry in diffservPortTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  DiffservPortEntry  

diffservPortState 1.3.6.1.4.1.890.1.5.8.72.34.3.1.1
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnabledStatus  

protoBasedVlanSetup 1.3.6.1.4.1.890.1.5.8.72.35
OBJECT IDENTIFIER    

protoBasedVlanTable 1.3.6.1.4.1.890.1.5.8.72.35.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ProtoBasedVlanEntry

protoBasedVlanEntry 1.3.6.1.4.1.890.1.5.8.72.35.1.1
An entry in protoBasedVlanTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  ProtoBasedVlanEntry  

protoBasedVlanPort 1.3.6.1.4.1.890.1.5.8.72.35.1.1.1
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

protoBasedVlanPacketType 1.3.6.1.4.1.890.1.5.8.72.35.1.1.2
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER etherII(1), snap(2), llc(3)  

protoBasedVlanEtherType 1.3.6.1.4.1.890.1.5.8.72.35.1.1.3
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

protoBasedVlanName 1.3.6.1.4.1.890.1.5.8.72.35.1.1.4
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..32)  

protoBasedVlanVid 1.3.6.1.4.1.890.1.5.8.72.35.1.1.5
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..4094  

protoBasedVlanPriority 1.3.6.1.4.1.890.1.5.8.72.35.1.1.6
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..7  

protoBasedVlanState 1.3.6.1.4.1.890.1.5.8.72.35.1.1.7
Tok_String
Status: mandatory Access: read-create
OBJECT-TYPE    
  RowStatus  

mrstp 1.3.6.1.4.1.890.1.5.8.72.36
OBJECT IDENTIFIER    

mrstpSetup 2.1
OBJECT IDENTIFIER    

mrstpBridgeTable 2.1.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MrstpBridgeEntry

mrstpBridgeEntry 2.1.1.1
An entry in mrstpBridgeTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MrstpBridgeEntry  

mrstpBridgeIndex 2.1.1.1.1
The tree index of the MRSTP.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

mrstpState 2.1.1.1.2
Enabled/disabled on the mrstp bridge.
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnabledStatus  

mrstpProtocolSpecification 2.1.1.1.3
An indication of what version of the Spanning Tree Protocol is being run. The value 'decLb100(2)' indicates the DEC LANbridge 100 Spanning Tree protocol. IEEE 802.1d implementations will return 'ieee8021d(3)'. If future versions of the IEEE Spanning Tree Protocol are released that are incompatible with the current version a new value will be defined.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), decLb100(2), ieee8021d(3)  

mrstpPriority 2.1.1.1.4
The value of the write-able portion of the Bridge ID, i.e., the first two octets of the (8 octet long) Bridge ID. The other (last) 6 octets of the Bridge ID are given by the value of dot1dBaseBridgeAddress.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

mrstpTimeSinceTopologyChange 2.1.1.1.5
The time (in hundredths of a second) since the last time a topology change was detected by the bridge entity.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

mrstpTopChanges 2.1.1.1.6
The total number of topology changes detected by this bridge since the management entity was last reset or initialized.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

mrstpDesignatedRoot 2.1.1.1.7
The bridge identifier of the root of the spanning tree as determined by the Spanning Tree Protocol as executed by this node. This value is used as the Root Identifier parameter in all Configuration Bridge PDUs originated by this node.
Status: mandatory Access: read-only
OBJECT-TYPE    
  BridgeId  

mrstpRootCost 2.1.1.1.8
The cost of the path to the root as seen from this bridge.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

mrstpRootPort 2.1.1.1.9
The port number of the port which offers the lowest cost path from this bridge to the root bridge.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

mrstpMaxAge 2.1.1.1.10
The maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded, in units of hundredths of a second. This is the actual value that this bridge is currently using.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Timeout  

mrstpHelloTime 2.1.1.1.11
The amount of time between the transmission of Configuration bridge PDUs by this node on any port when it is the root of the spanning tree or trying to become so, in units of hundredths of a second. This is the actual value that this bridge is currently using.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Timeout  

mrstpHoldTime 2.1.1.1.12
This time value determines the interval length during which no more than two Configuration bridge PDUs shall be transmitted by this node, in units of hundredths of a second.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

mrstpForwardDelay 2.1.1.1.13
This time value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving towards the Forwarding state. The value determines how long the port stays in each of the Listening and Learning states, which precede the Forwarding state. This value is also used, when a topology change has been detected and is underway, to age all dynamic entries in the Forwarding Database. [Note that this value is the one that this bridge is currently using, in contrast to mrstpBridgeForwardDelay which is the value that this bridge and all others would start using if/when this bridge were to become the root.]
Status: mandatory Access: read-only
OBJECT-TYPE    
  Timeout  

mrstpBridgeMaxAge 2.1.1.1.14
The value that all bridges use for MaxAge when this bridge is acting as the root. Note that 802.1D-1990 specifies that the range for this parameter is related to the value of mrstpBridgeHelloTime. The granularity of this timer is specified by 802.1D-1990 to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Timeout 600..4000  

mrstpBridgeHelloTime 2.1.1.1.15
The value that all bridges use for HelloTime when this bridge is acting as the root. The granularity of this timer is specified by 802.1D- 1990 to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Timeout 100..1000  

mrstpBridgeForwardDelay 2.1.1.1.16
The value that all bridges use for ForwardDelay when this bridge is acting as the root. Note that 802.1D-1990 specifies that the range for this parameter is related to the value of mrstpBridgeMaxAge. The granularity of this timer is specified by 802.1D-1990 to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Timeout 400..3000  

mrstpPortTable 2.1.2
A table that contains port-specific information for the Spanning Tree Protocol.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MrstpPortEntry

mrstpPortEntry 2.1.2.1
A list of information maintained by every port about the Spanning Tree Protocol state for that port.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MrstpPortEntry  

mrstpPort 2.1.2.1.1
The port number of the port for which this entry contains Spanning Tree Protocol management information.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

mrstpPortPriority 2.1.2.1.2
The value of the priority field which is contained in the first (in network byte order) octet of the (2 octet long) Port ID. The other octet of the Port ID is given by the value of mrstpPort.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

mrstpPortState 2.1.2.1.3
The port's current state as defined by application of the Spanning Tree Protocol. This state controls what action a port takes on reception of a frame. If the bridge has detected a port that is malfunctioning it will place that port into the broken(6) state. For ports which are disabled (see mrstpPortEnable), this object will have a value of disabled(1).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER disabled(1), blocking(2), listening(3), learning(4), forwarding(5), broken(6)  

mrstpPortEnable 2.1.2.1.4
The enabled/disabled status of the port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

mrstpPortPathCost 2.1.2.1.5
The contribution of this port to the path cost of paths towards the spanning tree root which include this port. 802.1D-1990 recommends that the default value of this parameter be in inverse proportion to the speed of the attached LAN.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..65535  

mrstpPortDesignatedRoot 2.1.2.1.6
The unique Bridge Identifier of the Bridge recorded as the Root in the Configuration BPDUs transmitted by the Designated Bridge for the segment to which the port is attached.
Status: mandatory Access: read-only
OBJECT-TYPE    
  BridgeId  

mrstpPortDesignatedCost 2.1.2.1.7
The path cost of the Designated Port of the segment connected to this port. This value is compared to the Root Path Cost field in received bridge PDUs.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

mrstpPortDesignatedBridge 2.1.2.1.8
The Bridge Identifier of the bridge which this port considers to be the Designated Bridge for this port's segment.
Status: mandatory Access: read-only
OBJECT-TYPE    
  BridgeId  

mrstpPortDesignatedPort 2.1.2.1.9
The Port Identifier of the port on the Designated Bridge for this port's segment.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(2)  

mrstpPortForwardTransitions 2.1.2.1.10
The number of times this port has transitioned from the Learning state to the Forwarding state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

mrstpPortOnBridgeIndex 2.1.2.1.11
Indetify the bridge index that this port joined to in MRSTP.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

mrstpPortAdminEdgePort 2.1.2.1.12
The administrative value of the Edge Port parameter. A value of true(1) indicates that this port should be assumed as an edge-port, and a value of false(2) indicates that this port should be assumed as a non-edge-port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER true(1), false(2)  

mrstpPortOperEdgePort 2.1.2.1.13
The operational value of the Edge Port parameter. The object is initialized to the value of the corresponding instance of dot1dStpPortAdminEdgePort. When the corresponding instance of dot1dStpPortAdminEdgePort is set, this object will be changed as well. This object will also be changed to false on reception of a BPDU.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER true(1), false(2)  

mrstpNotifications 2.2
OBJECT IDENTIFIER    

newRoot 2.2.1
Tok_String
Status: current Access: read-only
NOTIFICATION-TYPE    

topologyChange 2.2.2
Tok_String
Status: current Access: read-only
NOTIFICATION-TYPE    

dhcpSnp 1.3.6.1.4.1.890.1.5.8.72.100
OBJECT IDENTIFIER    

dhcpSnpVlanTable 1.3.6.1.4.1.890.1.5.8.72.100.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DhcpSnpVlanEntry

dhcpSnpVlanEntry 1.3.6.1.4.1.890.1.5.8.72.100.1.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  DhcpSnpVlanEntry  

dhcpSnpVlanEntryVid 1.3.6.1.4.1.890.1.5.8.72.100.1.1.1
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..4094  

dhcpSnpVlanEntryEnable 1.3.6.1.4.1.890.1.5.8.72.100.1.1.2
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnabledStatus  

dhcpSnpVlanEntryOption82Enable 1.3.6.1.4.1.890.1.5.8.72.100.1.1.3
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnabledStatus  

dhcpSnpVlanEntryInfo 1.3.6.1.4.1.890.1.5.8.72.100.1.1.4
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnabledStatus  

dhcpSnpPortTable 1.3.6.1.4.1.890.1.5.8.72.100.2
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DhcpSnpPortEntry

dhcpSnpPortEntry 1.3.6.1.4.1.890.1.5.8.72.100.2.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  DhcpSnpPortEntry  

dhcpSnpPortEntryPort 1.3.6.1.4.1.890.1.5.8.72.100.2.1.1
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

dhcpSnpPortEntryTrust 1.3.6.1.4.1.890.1.5.8.72.100.2.1.2
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnabledStatus  

dhcpSnpPortEntryRate 1.3.6.1.4.1.890.1.5.8.72.100.2.1.3