ZXR10-VLANATT-MIB

File: ZXR10-VLANATT-MIB.mib (16785 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC

Imported symbols

MODULE-IDENTITY OBJECT-TYPE Unsigned32
Counter64 enterprises TEXTUAL-CONVENTION
RowStatus DisplayString

Defined Types

EncapsulationType  
Enc Type
TEXTUAL-CONVENTION    
  INTEGER none(1), dot1q(2), qinq(3), dot1q-range(4), qinq-range(5)  

PidtagType  
Pidtag Type
TEXTUAL-CONVENTION    
  INTEGER pidtag88a8(1), pidtag8100(2), pidtag9100(3), pidtag9200(4), pidtag9300(5), pidtag88e8(6)  

EnabledStatus  
A simple status value for the object.
TEXTUAL-CONVENTION    
  INTEGER enabled(1), disabled(2)  

Zxr10VlanAttEntry  
SEQUENCE    
  zxr10VlanAttIntfIndex Unsigned32
  zxr10VlanAttIntfName DisplayString
  zxr10VlanAttParentIfIndex Unsigned32
  zxr10VlanAttParentIfName DisplayString
  zxr10VlanAttEncType EncapsulationType
  zxr10VlanAttAttNo Unsigned32
  zxr10VlanAttInterVlan DisplayString
  zxr10VlanAttExterVlan DisplayString

Zxr10IfVlanTrafficStatEntry  
SEQUENCE    
  zxr10IfVlanTrafficStatIfIndex Unsigned32
  zxr10IfVlanTrafficStatIfName DisplayString
  zxr10IfVlanTrafficStatInterVlanID Unsigned32
  zxr10IfVlanTrafficStatExterVlanID Unsigned32
  zxr10IfVlanTrafficStatInPkts Counter64
  zxr10IfVlanTrafficStatInBytes Counter64
  zxr10IfVlanTrafficStatOutPkts Counter64
  zxr10IfVlanTrafficStatOutBytes Counter64
  zxr10IfVlanTrafficStatInDiscards Counter64
  zxr10IfVlanTrafficStatOutDiscards Counter64

Zxr10VlanIfConfigEntry  
SEQUENCE    
  zxr10VlanIfConfigIfName DisplayString
  zxr10VlanIfConfigInterVlan DisplayString
  zxr10VlanIfConfigExterVlan DisplayString
  zxr10VlanIfConfigRowStatus RowStatus

Zxr10VlanTpidEntry  
SEQUENCE    
  zxr10VlanPidAttIntfName DisplayString
  zxr10VlanAttExterPid PidtagType
  zxr10VlanAttInterPid PidtagType

Zxr10VlanRangeBrdcstFlagEntry  
SEQUENCE    
  zxr10VlanRangeAttIntfName DisplayString
  zxr10VlanAttRangeFlag EnabledStatus
  zxr10VlanAttSingleLayer EnabledStatus

Defined Values

zte 1.3.6.1.4.1.3902
ZXROS SMI MIB
MODULE-IDENTITY    

zxr10 1.3.6.1.4.1.3902.3
OBJECT IDENTIFIER    

zxr10switch 1.3.6.1.4.1.3902.3.102
OBJECT IDENTIFIER    

zxr10VlanAtt 1.3.6.1.4.1.3902.3.102.52
OBJECT IDENTIFIER    

zxr10VlanAttTable 1.3.6.1.4.1.3902.3.102.52.1
Configure VLAN Intf Att parameters.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Zxr10VlanAttEntry

zxr10VlanAttEntry 1.3.6.1.4.1.3902.3.102.52.1.1
Each row index by ifIndex and AttNo And contain imformation of VLAN.
Status: current Access: not-accessible
OBJECT-TYPE    
  Zxr10VlanAttEntry  

zxr10VlanAttIntfIndex 1.3.6.1.4.1.3902.3.102.52.1.1.1
Interface Index.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

zxr10VlanAttIntfName 1.3.6.1.4.1.3902.3.102.52.1.1.2
Interface Name.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

zxr10VlanAttParentIfIndex 1.3.6.1.4.1.3902.3.102.52.1.1.3
Parent Interface Index.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

zxr10VlanAttParentIfName 1.3.6.1.4.1.3902.3.102.52.1.1.4
Parent Interface Name.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

zxr10VlanAttEncType 1.3.6.1.4.1.3902.3.102.52.1.1.5
Encapsulation Type.
Status: current Access: read-only
OBJECT-TYPE    
  EncapsulationType  

zxr10VlanAttAttNo 1.3.6.1.4.1.3902.3.102.52.1.1.6
Att No
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

zxr10VlanAttInterVlan 1.3.6.1.4.1.3902.3.102.52.1.1.7
Internal Vlan.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

zxr10VlanAttExterVlan 1.3.6.1.4.1.3902.3.102.52.1.1.8
External Vlan.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

zxr10IfVlanTrafficStatTable 1.3.6.1.4.1.3902.3.102.52.2
Traffic Statistic for qinq vlan.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Zxr10IfVlanTrafficStatEntry

zxr10IfVlanTrafficStatEntry 1.3.6.1.4.1.3902.3.102.52.2.1
Each row index by ifIndex and internal vlan id or external vlan id And contain imformation of VLAN.
Status: current Access: not-accessible
OBJECT-TYPE    
  Zxr10IfVlanTrafficStatEntry  

zxr10IfVlanTrafficStatIfIndex 1.3.6.1.4.1.3902.3.102.52.2.1.1
Interface Index.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

zxr10IfVlanTrafficStatIfName 1.3.6.1.4.1.3902.3.102.52.2.1.2
Interface Name.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

zxr10IfVlanTrafficStatInterVlanID 1.3.6.1.4.1.3902.3.102.52.2.1.3
Inter vlan id.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

zxr10IfVlanTrafficStatExterVlanID 1.3.6.1.4.1.3902.3.102.52.2.1.4
Exter vlan id.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

zxr10IfVlanTrafficStatInPkts 1.3.6.1.4.1.3902.3.102.52.2.1.5
In Packets.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxr10IfVlanTrafficStatInBytes 1.3.6.1.4.1.3902.3.102.52.2.1.6
In Bytes.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxr10IfVlanTrafficStatOutPkts 1.3.6.1.4.1.3902.3.102.52.2.1.7
Out Packets.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxr10IfVlanTrafficStatOutBytes 1.3.6.1.4.1.3902.3.102.52.2.1.8
Out Bytes.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxr10IfVlanTrafficStatInDiscards 1.3.6.1.4.1.3902.3.102.52.2.1.9
In Discards.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxr10IfVlanTrafficStatOutDiscards 1.3.6.1.4.1.3902.3.102.52.2.1.10
Out Discards.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxr10VlanIfConfigTable 1.3.6.1.4.1.3902.3.102.52.3
Configuration infomation of vlan sub-interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Zxr10VlanIfConfigEntry

zxr10VlanIfConfigEntry 1.3.6.1.4.1.3902.3.102.52.3.1
Each row index by ifName and internal vlan id and external vlan id And contain imformation of VLAN. In project 5900 and 9900,user can set dot1q type vlan only,and vlanid 1 is not allowed to configurate.
Status: current Access: not-accessible
OBJECT-TYPE    
  Zxr10VlanIfConfigEntry  

zxr10VlanIfConfigIfName 1.3.6.1.4.1.3902.3.102.52.3.1.1
Interface Name.
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString  

zxr10VlanIfConfigInterVlan 1.3.6.1.4.1.3902.3.102.52.3.1.2
InnerVlan infomation.
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString  

zxr10VlanIfConfigExterVlan 1.3.6.1.4.1.3902.3.102.52.3.1.3
OuterVlan infomation.
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString  

zxr10VlanIfConfigRowStatus 1.3.6.1.4.1.3902.3.102.52.3.1.4
Row Status infomation.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

zxr10VlanTpidTable 1.3.6.1.4.1.3902.3.102.52.4
TPID infomation of vlan sub-interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Zxr10VlanTpidEntry

zxr10VlanTpidEntry 1.3.6.1.4.1.3902.3.102.52.4.1
Each row index by ifName And contain imformation of VLAN.
Status: current Access: not-accessible
OBJECT-TYPE    
  Zxr10VlanTpidEntry  

zxr10VlanPidAttIntfName 1.3.6.1.4.1.3902.3.102.52.4.1.1
Interface Name.
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString  

zxr10VlanAttExterPid 1.3.6.1.4.1.3902.3.102.52.4.1.2
Value of External Pid,valid value is 1-6,they separately mean 88a8 8100 9100 9200 9300 88e8, default value can be set by different project.
Status: current Access: read-only
OBJECT-TYPE    
  PidtagType  

zxr10VlanAttInterPid 1.3.6.1.4.1.3902.3.102.52.4.1.3
Value of Internal Pid,valid value is 1-6,they separately mean 88a8 8100 9100 9200 9300 88e8, default value can be set by different project.
Status: current Access: read-only
OBJECT-TYPE    
  PidtagType  

zxr10VlanRangeBrdcstFlagTable 1.3.6.1.4.1.3902.3.102.52.5
Range Flag infomation of vlan sub-interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Zxr10VlanRangeBrdcstFlagEntry

zxr10VlanRangeBrdcstFlagEntry 1.3.6.1.4.1.3902.3.102.52.5.1
Each row index by ifName .
Status: current Access: not-accessible
OBJECT-TYPE    
  Zxr10VlanRangeBrdcstFlagEntry  

zxr10VlanRangeAttIntfName 1.3.6.1.4.1.3902.3.102.52.5.1.1
Interface Name.
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString  

zxr10VlanAttRangeFlag 1.3.6.1.4.1.3902.3.102.52.5.1.2
Vlan range broadcast flag,1 mean enable,2 mean disable,default value is 2.
Status: current Access: read-only
OBJECT-TYPE    
  EnabledStatus  

zxr10VlanAttSingleLayer 1.3.6.1.4.1.3902.3.102.52.5.1.3
Vlan range broadcast singlelayer flag,1 mean enable,2 mean disable,default value is 2.
Status: current Access: read-only
OBJECT-TYPE    
  EnabledStatus  

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor