ZXR10-SWITCHQOS-MIB

File: ZXR10-SWITCHQOS-MIB.mib (35457 bytes)

Imported modules

Imported symbols

RowStatus	MODULE-IDENTITY	OBJECT-TYPE
TimeTicks	enterprises	IpAddress

Defined Types

DisplayString
OCTET STRING

TrafficDropPriority
INTEGER	low(0), medium(1), high(2)

TrafficColorMode
INTEGER	blind(0), aware(1)

TrafficForward
INTEGER	forwardRed(1)

TrafficDrop
INTEGER	dropYellow(1)

TrafficMirrorAction
INTEGER	cpu(1), interface(2)

RedirectFlag
INTEGER	cpu(1), interface(2), next-hop(3), next-hop-ipv6(4)

Packettype
INTEGER	all(0), red(1), yellow(2), green(3)

Statisticstype
INTEGER	packet(0), byte(1)

GreenOnlyType
INTEGER	green-only(1)

InetAddressIPv6
Represents an IPv6 network address: octets contents encoding 1-16 IPv6 address network-byte order 17-20 scope identifier network-byte order The corresponding InetAddressType value is ipv6(2). The scope identifier (bytes 17-20) MUST NOT be present for global IPv6 addresses. For non-global IPv6 addresses (e.g. link-local or site-local addresses), the scope identifier MUST always be present. It contains a link identifier for link-local and a site identifier for site-local IPv6 addresses. The scope identifier MUST disambiguate identical address values. For link-local addresses, the scope identifier will typically be the interface index (ifIndex as defined in the IF-MIB, RFC 2233) of the interface on which the address is configured. The scope identifier may contain the special value 0 which refers to the default scope. The default scope may be used in cases where the valid scope identifier is not known (e.g., a management application needs to write a site-local InetAddressIPv6 address without knowing the site identifier value). The default scope SHOULD NOT be used as an easy way out in cases where the scope identifier for a non-global IPv6 is known.
TEXTUAL-CONVENTION
	OCTET STRING	Size(16\|20)

Zxr10AclQosPriorityMarkEntry
SEQUENCE
	zxr10AclQosPriorityMarkAclNo	INTEGER
	zxr10AclQosPriorityMarkRuleId	INTEGER
	zxr10AclQosPriorityMarkAclName	DisplayString
	zxr10AclQosPriorityMarkDscpValue	INTEGER
	zxr10AclQosPriorityMarkCosValue	INTEGER
	zxr10AclQosPriorityMarkLocalPrecedence	INTEGER
	zxr10AclQosPriorityMarkDropPrecedence	TrafficDropPriority
	zxr10AclQosPriorityMarkOuterVlanId	INTEGER
	zxr10AclQosPriorityMarkPrecedenceValue	INTEGER
	zxr10AclQosPriorityMarkRowStatus	RowStatus

Zxr10AclQosTrafficLimitEntry
SEQUENCE
	zxr10AclQosTrafficLimitAclNo	INTEGER
	zxr10AclQosTrafficLimitRuleId	INTEGER
	zxr10AclQosTrafficLimitAclName	DisplayString
	zxr10AclQosTrafficLimitCir	INTEGER
	zxr10AclQosTrafficLimitCbs	INTEGER
	zxr10AclQosTrafficLimitEbs	INTEGER
	zxr10AclQosTrafficLimitPir	INTEGER
	zxr10AclQosTrafficLimitPbs	INTEGER
	zxr10AclQosTrafficLimitMode	TrafficColorMode
	zxr10AclQosTrafficLimitRedDscpValue	INTEGER
	zxr10AclQosTrafficLimitYelDscpValue	INTEGER
	zxr10AclQosTrafficLimitRedDp	TrafficDropPriority
	zxr10AclQosTrafficLimitYelDp	TrafficDropPriority
	zxr10AclQosTrafficLimitForwadRed	TrafficForward
	zxr10AclQosTrafficLimitDropYellow	TrafficDrop
	zxr10AclQosTrafficLimitRowStatus	RowStatus

Zxr10AclQosTrafficMirrorEntry
SEQUENCE
	zxr10AclQosTrafficMirrorAclNo	INTEGER
	zxr10AclQosTrafficMirrorRuleId	INTEGER
	zxr10AclQosTrafficMirrorAclName	DisplayString
	zxr10AclQosTrafficMirrorAction	TrafficMirrorAction
	zxr10AclQosTrafficMirrorIfName	DisplayString
	zxr10AclQosTrafficMirrorRowStatus	RowStatus

Zxr10AclQosRedirectEntry
SEQUENCE
	zxr10AclQosRedirectAclNo	INTEGER
	zxr10AclQosRedirectRuleId	INTEGER
	zxr10AclQosRedirectAclName	DisplayString
	zxr10AclQosRedirectFlag	RedirectFlag
	zxr10AclQosRedirectGPort	DisplayString
	zxr10AclQosRedirectIpAddr1	IpAddress
	zxr10AclQosRedirectIpPri1	INTEGER
	zxr10AclQosRedirectIpAddr2	IpAddress
	zxr10AclQosRedirectIpPri2	INTEGER
	zxr10AclQosRedirectIpAddr3	IpAddress
	zxr10AclQosRedirectIpPri3	INTEGER
	zxr10AclQosRedirectIpAddr4	IpAddress
	zxr10AclQosRedirectIpPri4	INTEGER
	zxr10AclQosRedirectIpAddr5	IpAddress
	zxr10AclQosRedirectIpPri5	INTEGER
	zxr10AclQosRedirectIpAddr6	IpAddress
	zxr10AclQosRedirectIpPri6	INTEGER
	zxr10AclQosRedirectIpAddr7	IpAddress
	zxr10AclQosRedirectIpPri7	INTEGER
	zxr10AclQosRedirectIpAddr8	IpAddress
	zxr10AclQosRedirectIpPri8	INTEGER
	zxr10AclQosRedirectIPv6Addr	InetAddressIPv6
	zxr10AclQosRedirectGreenOnly	GreenOnlyType
	zxr10AclQosRedirectRowStatus	RowStatus

Zxr10AclQosTrafficStatisticsEntry
SEQUENCE
	zxr10AclQosTrafficStatisticsAclNo	INTEGER
	zxr10AclQosTrafficStatisticsRuleId	INTEGER
	zxr10AclQosTrafficStatisticsAclName	DisplayString
	zxr10AclQosTrafficStatisticsPkttype	Packettype
	zxr10AclQosTrafficStatisticsStatype	Statisticstype
	zxr10AclQosTrafficStatisticsRowStatus	RowStatus

Defined Values

zte		1.3.6.1.4.1.3902
OBJECT IDENTIFIER

zxr10		1.3.6.1.4.1.3902.3
OBJECT IDENTIFIER

zxr10switch		1.3.6.1.4.1.3902.3.102
OBJECT IDENTIFIER

zxr10swqos		1.3.6.1.4.1.3902.3.102.3
OBJECT IDENTIFIER

zxr10AclQosPriorityMarkTable		1.3.6.1.4.1.3902.3.102.3.1
The description of zxr10 acl qos priority mark configuration. It is a list of acl qos priority mark entries.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Zxr10AclQosPriorityMarkEntry

zxr10AclQosPriorityMarkEntry		1.3.6.1.4.1.3902.3.102.3.1.1
A acl qos Priority Mark entry containing objects that acl qos Priority Mark infomation,such as: dscp-value, dorp precedence etc.
Status: current	Access: not-accessible
OBJECT-TYPE
	Zxr10AclQosPriorityMarkEntry

zxr10AclQosPriorityMarkAclNo		1.3.6.1.4.1.3902.3.102.3.1.1.1
The acl qos priority mark acl-number.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

zxr10AclQosPriorityMarkRuleId		1.3.6.1.4.1.3902.3.102.3.1.1.2
The acl qos priority mark rule-id.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

zxr10AclQosPriorityMarkAclName		1.3.6.1.4.1.3902.3.102.3.1.1.3
The acl qos priority mark acl-name.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

zxr10AclQosPriorityMarkDscpValue		1.3.6.1.4.1.3902.3.102.3.1.1.4
The acl qos priority mark dscp value, the valid value is 0-63
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER

zxr10AclQosPriorityMarkCosValue		1.3.6.1.4.1.3902.3.102.3.1.1.5
The acl qos priority mark cos value, the valid value is 0-7
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER

zxr10AclQosPriorityMarkLocalPrecedence		1.3.6.1.4.1.3902.3.102.3.1.1.6
The acl qos priority mark local precedence value,the valid value is 0-7
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER

zxr10AclQosPriorityMarkDropPrecedence		1.3.6.1.4.1.3902.3.102.3.1.1.7
THe acl qos priority mark dorp precedence value, the valid value is high(2), low(0), medium(1)
Status: current	Access: read-create
OBJECT-TYPE
	TrafficDropPriority

zxr10AclQosPriorityMarkOuterVlanId		1.3.6.1.4.1.3902.3.102.3.1.1.8
The acl qos Priority Mark outer vlan id, the valid value is 1-4094.not support by 59 program
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER

zxr10AclQosPriorityMarkPrecedenceValue		1.3.6.1.4.1.3902.3.102.3.1.1.9
The acl qos priority mark precedence value,the valid value is 0-7
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER

zxr10AclQosPriorityMarkRowStatus		1.3.6.1.4.1.3902.3.102.3.1.1.10
The acl qos Priority Mark item row status. if it is in valid status, it only can change to invalid status, no other status.when you creat something, you should enter creatAndGo(4), and when you want to delete it, you should enter destroy(6).
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

zxr10AclQosTrafficLimitTable		1.3.6.1.4.1.3902.3.102.3.2
The description of zxr10 acl qos traffic limit configuration. It is a list of acl qos traffic limit entries.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Zxr10AclQosTrafficLimitEntry

zxr10AclQosTrafficLimitEntry		1.3.6.1.4.1.3902.3.102.3.2.1
A acl qos traffic limit entry containing objects that acl qos traffic limit infomation,such as: cbs value, ebs value, pir value, traffic limit mode etc.
Status: current	Access: not-accessible
OBJECT-TYPE
	Zxr10AclQosTrafficLimitEntry

zxr10AclQosTrafficLimitAclNo		1.3.6.1.4.1.3902.3.102.3.2.1.1
The acl qos traffic limit acl number
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

zxr10AclQosTrafficLimitRuleId		1.3.6.1.4.1.3902.3.102.3.2.1.2
The acl qos traffic limit rule id
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

zxr10AclQosTrafficLimitAclName		1.3.6.1.4.1.3902.3.102.3.2.1.3
The acl qos traffic limit acl name
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

zxr10AclQosTrafficLimitCir		1.3.6.1.4.1.3902.3.102.3.2.1.4
The acl qos traffic limit cir value, the valid value is 1-32000000 in 89 program.but in 59 program is 64-32000000
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER

zxr10AclQosTrafficLimitCbs		1.3.6.1.4.1.3902.3.102.3.2.1.5
The acl qos traffic limit cbs value, the valid value is 1-16000.but in 59 program is 4-16000
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER

zxr10AclQosTrafficLimitEbs		1.3.6.1.4.1.3902.3.102.3.2.1.6
The acl qos traffic limit ebs value, the valid value is 4-16000.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER

zxr10AclQosTrafficLimitPir		1.3.6.1.4.1.3902.3.102.3.2.1.7
The acl qos traffic limit pir value, the valid value is 64-32000000.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER

zxr10AclQosTrafficLimitPbs		1.3.6.1.4.1.3902.3.102.3.2.1.8
The acl qos traffic limit pbs value, the valid value is 4-16000.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER

zxr10AclQosTrafficLimitMode		1.3.6.1.4.1.3902.3.102.3.2.1.9
The acl qos traffic limit work mode, the valid value is blind(0) or aware(1).
Status: current	Access: read-create
OBJECT-TYPE
	TrafficColorMode

zxr10AclQosTrafficLimitRedDscpValue		1.3.6.1.4.1.3902.3.102.3.2.1.10
The acl qos traffic limit red dscp value, the valid value is 0-63.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER

zxr10AclQosTrafficLimitYelDscpValue		1.3.6.1.4.1.3902.3.102.3.2.1.11
The acl qos traffic limit yellow dscp value, the valid value is 0-63.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER

zxr10AclQosTrafficLimitRedDp		1.3.6.1.4.1.3902.3.102.3.2.1.12
The acl qos traffic limit red drop, the valid value is high(2), low(0), medium(1).
Status: current	Access: read-create
OBJECT-TYPE
	TrafficDropPriority

zxr10AclQosTrafficLimitYelDp		1.3.6.1.4.1.3902.3.102.3.2.1.13
The acl qos traffic limit yellow drop,the valid value is high(2), low(0), medium(1).
Status: current	Access: read-create
OBJECT-TYPE
	TrafficDropPriority

zxr10AclQosTrafficLimitForwadRed		1.3.6.1.4.1.3902.3.102.3.2.1.14
The acl qos traffic forwad red,the valid value is forwad-red(1).
Status: current	Access: read-create
OBJECT-TYPE
	TrafficForward

zxr10AclQosTrafficLimitDropYellow		1.3.6.1.4.1.3902.3.102.3.2.1.15
The acl qos traffic limit drop yellow, the valid value is drop-yellow(1).
Status: current	Access: read-create
OBJECT-TYPE
	TrafficDrop

zxr10AclQosTrafficLimitRowStatus		1.3.6.1.4.1.3902.3.102.3.2.1.16
The acl qos Traffic Limit item row status. if it is in valid status, it only can change to invalid status, no other status.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

zxr10AclQosTrafficMirrorTable		1.3.6.1.4.1.3902.3.102.3.3
The description of zxr10 acl qos traffic mirror configuration. It is a list of acl qos traffic mirror entries.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Zxr10AclQosTrafficMirrorEntry

zxr10AclQosTrafficMirrorEntry		1.3.6.1.4.1.3902.3.102.3.3.1
A acl qos traffic mirror entry containing objects that acl qos traffic mirror infomation,such as: mirror action, interface name, row status etc.
Status: current	Access: not-accessible
OBJECT-TYPE
	Zxr10AclQosTrafficMirrorEntry

zxr10AclQosTrafficMirrorAclNo		1.3.6.1.4.1.3902.3.102.3.3.1.1
The acl qos traffic mirror acl number
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

zxr10AclQosTrafficMirrorRuleId		1.3.6.1.4.1.3902.3.102.3.3.1.2
The acl qos traffic mirror ruler id
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

zxr10AclQosTrafficMirrorAclName		1.3.6.1.4.1.3902.3.102.3.3.1.3
The acl qos traffic mirror acl name
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

zxr10AclQosTrafficMirrorAction		1.3.6.1.4.1.3902.3.102.3.3.1.4
The acl qos traffic mirror action,cpu 1, interface 2
Status: current	Access: read-create
OBJECT-TYPE
	TrafficMirrorAction

zxr10AclQosTrafficMirrorIfName		1.3.6.1.4.1.3902.3.102.3.3.1.5
when traffic mirror to interface, this is the interface's name. and this only for 59 program
Status: current	Access: read-create
OBJECT-TYPE
	DisplayString

zxr10AclQosTrafficMirrorRowStatus		1.3.6.1.4.1.3902.3.102.3.3.1.6
The acl qos Traffic Mirror item row status. if it is in valid status, it only can change to invalid status, no other status.when you creat something, you should enter creatAndGo(4), and when you want to delete it, you should enter destroy(6).
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

zxr10AclQosRedirectTable		1.3.6.1.4.1.3902.3.102.3.4
The description of zxr10 acl qos redirect configuration. It is a list of acl qos redirect entries.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Zxr10AclQosRedirectEntry

zxr10AclQosRedirectEntry		1.3.6.1.4.1.3902.3.102.3.4.1
A acl qos redirect entry containing objects that acl qos redirect infomation,such as: globar port name, next-hop ip address, ip address priority etc.
Status: current	Access: not-accessible
OBJECT-TYPE
	Zxr10AclQosRedirectEntry

zxr10AclQosRedirectAclNo		1.3.6.1.4.1.3902.3.102.3.4.1.1
The acl qos redirect acl number
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

zxr10AclQosRedirectRuleId		1.3.6.1.4.1.3902.3.102.3.4.1.2
The acl qos redirect Ruler id
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

zxr10AclQosRedirectAclName		1.3.6.1.4.1.3902.3.102.3.4.1.3
The acl qos redirect acl name
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

zxr10AclQosRedirectFlag		1.3.6.1.4.1.3902.3.102.3.4.1.4
The acl qos redirect flag,cpu 1, interface 2,next-hop 3, next-hop-ipv6(4)
Status: current	Access: read-create
OBJECT-TYPE
	RedirectFlag

zxr10AclQosRedirectGPort		1.3.6.1.4.1.3902.3.102.3.4.1.5
The acl qos redirect interface name
Status: current	Access: read-create
OBJECT-TYPE
	DisplayString

zxr10AclQosRedirectIpAddr1		1.3.6.1.4.1.3902.3.102.3.4.1.6
The first redirect next-hop ip adderss
Status: current	Access: read-create
OBJECT-TYPE
	IpAddress

zxr10AclQosRedirectIpPri1		1.3.6.1.4.1.3902.3.102.3.4.1.7
The priority of the firest ip address,0-7
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER

zxr10AclQosRedirectIpAddr2		1.3.6.1.4.1.3902.3.102.3.4.1.8
The second redirect next-hop ip adderss
Status: current	Access: read-create
OBJECT-TYPE
	IpAddress

zxr10AclQosRedirectIpPri2		1.3.6.1.4.1.3902.3.102.3.4.1.9
The priority of the second ip address,0-7
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER

zxr10AclQosRedirectIpAddr3		1.3.6.1.4.1.3902.3.102.3.4.1.10
The third redirect next-hop ip adderss
Status: current	Access: read-create
OBJECT-TYPE
	IpAddress

zxr10AclQosRedirectIpPri3		1.3.6.1.4.1.3902.3.102.3.4.1.11
The priority of the third ip address,0-7
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER

zxr10AclQosRedirectIpAddr4		1.3.6.1.4.1.3902.3.102.3.4.1.12
The fourth redirect next-hop ip adderss
Status: current	Access: read-create
OBJECT-TYPE
	IpAddress

zxr10AclQosRedirectIpPri4		1.3.6.1.4.1.3902.3.102.3.4.1.13
The priority of the fourth ip address,0-7
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER

zxr10AclQosRedirectIpAddr5		1.3.6.1.4.1.3902.3.102.3.4.1.14
The fifth redirect next-hop ip adderss
Status: current	Access: read-create
OBJECT-TYPE
	IpAddress

zxr10AclQosRedirectIpPri5		1.3.6.1.4.1.3902.3.102.3.4.1.15
The priority of the fifth ip address,0-7
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER

zxr10AclQosRedirectIpAddr6		1.3.6.1.4.1.3902.3.102.3.4.1.16
The sixth redirect next-hop ip adderss
Status: current	Access: read-create
OBJECT-TYPE
	IpAddress

zxr10AclQosRedirectIpPri6		1.3.6.1.4.1.3902.3.102.3.4.1.17
The priority of the sixth ip address,0-7
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER

zxr10AclQosRedirectIpAddr7		1.3.6.1.4.1.3902.3.102.3.4.1.18
The seventh redirect next-hop ip adderss
Status: current	Access: read-create
OBJECT-TYPE
	IpAddress

zxr10AclQosRedirectIpPri7		1.3.6.1.4.1.3902.3.102.3.4.1.19
The priority of the seventh ip address,0-7
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER

zxr10AclQosRedirectIpAddr8		1.3.6.1.4.1.3902.3.102.3.4.1.20
The eighth redirect next-hop ip adderss
Status: current	Access: read-create
OBJECT-TYPE
	IpAddress

zxr10AclQosRedirectIpPri8		1.3.6.1.4.1.3902.3.102.3.4.1.21
The priority of the eighth ip address,0-7
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER

zxr10AclQosRedirectIPv6Addr		1.3.6.1.4.1.3902.3.102.3.4.1.22
The Redirect next-hop is IPv6 Address,support by 59 device.
Status: current	Access: read-create
OBJECT-TYPE
	InetAddressIPv6

zxr10AclQosRedirectGreenOnly		1.3.6.1.4.1.3902.3.102.3.4.1.23
The Redirect action only to green packet, support by 59 device.
Status: current	Access: read-create
OBJECT-TYPE
	GreenOnlyType

zxr10AclQosRedirectRowStatus		1.3.6.1.4.1.3902.3.102.3.4.1.24
The acl qos Redirect item row status. if it is in valid status, it only can change to invalid status, no other status.when you creat something, you should enter creatAndGo(4), and when you want to delete it, you should enter destroy(6).
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

zxr10AclQosTrafficStatisticsTable		1.3.6.1.4.1.3902.3.102.3.5
The description of zxr10 acl qos traffic statistics configuration. It is a list of acl qos traffic statistics entries.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Zxr10AclQosTrafficStatisticsEntry

zxr10AclQosTrafficStatisticsEntry		1.3.6.1.4.1.3902.3.102.3.5.1
A acl qos traffic statistics entry containing objects that acl qos traffic statistics infomation,such as: pkt-type, statistics type etc.
Status: current	Access: not-accessible
OBJECT-TYPE
	Zxr10AclQosTrafficStatisticsEntry

zxr10AclQosTrafficStatisticsAclNo		1.3.6.1.4.1.3902.3.102.3.5.1.1
The acl qos traffic Statistics acl number
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

zxr10AclQosTrafficStatisticsRuleId		1.3.6.1.4.1.3902.3.102.3.5.1.2
The acl qos traffic Statistics ruler id
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

zxr10AclQosTrafficStatisticsAclName		1.3.6.1.4.1.3902.3.102.3.5.1.3
The acl qos traffic Statistics acl name
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

zxr10AclQosTrafficStatisticsPkttype		1.3.6.1.4.1.3902.3.102.3.5.1.4
The acl qos traffic Statistics pkt-type,all 0, green 1,red 2,yellow 3
Status: current	Access: read-create
OBJECT-TYPE
	Packettype

zxr10AclQosTrafficStatisticsStatype		1.3.6.1.4.1.3902.3.102.3.5.1.5
The acl qos traffic Statistics statistics type :byte 1,packet 0
Status: current	Access: read-create
OBJECT-TYPE
	Statisticstype

zxr10AclQosTrafficStatisticsRowStatus		1.3.6.1.4.1.3902.3.102.3.5.1.6
The acl qos Traffic Statistics item row status. if it is in valid status, it only can change to invalid status, no other status.when you creat something, you should enter creatAndGo(4), and when you want to delete it, you should enter destroy(6).
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus