ZXR10-SWITCH-MIB

File: ZXR10-SWITCH-MIB.mib (69882 bytes)

Imported modules

SNMPv2-SMI SNMPv2-CONF SNMPv2-TC
RFC1155-SMI RFC1213-MIB

Imported symbols

MODULE-IDENTITY OBJECT-TYPE NOTIFICATION-TYPE
experimental Integer32 Unsigned32
Counter32 MODULE-COMPLIANCE OBJECT-GROUP
NOTIFICATION-GROUP enterprises MacAddress
RowStatus mgmt NetworkAddress
IpAddress Counter Gauge
ifIndex

Defined Types

DisplayString  
OCTET STRING    

Zxr10CpuVlanPvidEntry  
SEQUENCE    
  zxr10CpuVlanId Integer32
  zxr10CpuVlanIf Integer32
  zxr10CpuVlanMtu Integer32
  zxr10CpuVlanState INTEGER
  zxr10CpuVlanSaid Integer32
  zxr10CpuVlanVpnid Integer32
  zxr10CpuVlanRowStatus RowStatus
  zxr10CpuVlanName DisplayString
  zxr10CpuVlanMemPortsPvid DisplayString

Zxr10CpuVlanTagEntry  
SEQUENCE    
  zxr10CpuVlanid Integer32
  zxr10CpuVlanvpnid Integer32
  zxr10CpuVlanname DisplayString
  zxr10CpuVlanMemPortsTag DisplayString

Zxr10CpuVlanUntagEntry  
SEQUENCE    
  zxr10Cpuvlanid Integer32
  zxr10CpuVlanvpnId Integer32
  zxr10Cpuvlanname DisplayString
  zxr10CpuVlanMemPortsUntag DisplayString

Zxr10IgmpSnoopingEntry  
SEQUENCE    
  zxr10igmpSnoopingValid INTEGER
  zxr10igmpSnoopingVlanId Integer32
  zxr10igmpSnoopingGroupId Integer32
  zxr10igmpSnoopingDropEnable INTEGER
  zxr10igmpSnoopingMaxHostNum Integer32
  zxr10igmpSnoopingIpAddr IpAddress
  zxr10igmpSnoopingGroupMac MacAddress
  zxr10igmpSnoopingMemPorts0 OCTET STRING Size(0..64)
  zxr10igmpSnoopingMemPorts1 OCTET STRING Size(0..64)
  zxr10igmpSnoopingMemPorts2 OCTET STRING Size(0..64)
  zxr10igmpSnoopingMemPorts3 OCTET STRING Size(0..64)
  zxr10igmpSnoopingMemPorts4 OCTET STRING Size(0..64)
  zxr10igmpSnoopingMemPorts5 OCTET STRING Size(0..64)
  zxr10igmpSnoopingMemPorts6 OCTET STRING Size(0..64)
  zxr10igmpSnoopingMemPorts7 OCTET STRING Size(0..64)
  zxr10igmpSnoopingMemPorts8 OCTET STRING Size(0..64)
  zxr10igmpSnoopingMemPorts9 OCTET STRING Size(0..64)
  zxr10igmpSnoopingMemPorts10 OCTET STRING Size(0..64)
  zxr10igmpSnoopingMemPorts11 OCTET STRING Size(0..64)
  zxr10igmpSnoopingMemPorts12 OCTET STRING Size(0..64)
  zxr10pimSnoopingMemPorts0 OCTET STRING Size(0..64)
  zxr10pimSnoopingMemPorts1 OCTET STRING Size(0..64)
  zxr10pimSnoopingMemPorts2 OCTET STRING Size(0..64)
  zxr10pimSnoopingMemPorts3 OCTET STRING Size(0..64)
  zxr10pimSnoopingMemPorts4 OCTET STRING Size(0..64)
  zxr10pimSnoopingMemPorts5 OCTET STRING Size(0..64)
  zxr10pimSnoopingMemPorts6 OCTET STRING Size(0..64)
  zxr10pimSnoopingMemPorts7 OCTET STRING Size(0..64)
  zxr10pimSnoopingMemPorts8 OCTET STRING Size(0..64)
  zxr10pimSnoopingMemPorts9 OCTET STRING Size(0..64)
  zxr10pimSnoopingMemPorts10 OCTET STRING Size(0..64)
  zxr10pimSnoopingMemPorts11 OCTET STRING Size(0..64)
  zxr10pimSnoopingMemPorts12 OCTET STRING Size(0..64)

Zxr10PimSnoopingNeighborEntry  
SEQUENCE    
  zxr10pimSnoopingNeighborValid INTEGER
  zxr10pimSnoopingNeighborVlanId Integer32
  zxr10pimSnoopingNeighborVpnId Integer32
  zxr10pimSnoopingNeighborId Integer32
  zxr10pimSnoopingNeighborSourceIpAddr IpAddress
  zxr10pimSnoopingNeighborPort OCTET STRING

Zxr10IgmpSnoopingVlanEntry  
SEQUENCE    
  zxr10igmpSnoopingVlanEntryVlanId Integer32
  zxr10igmpSnoopingVlanEntryEnable INTEGER
  zxr10pimSnoopingVlanEntryEnable INTEGER
  zxr10igmpSnoopingFastLeave INTEGER
  zxr10igmpSnoopingLastMemberQueryInterval Integer32
  zxr10igmpSnoopingMaxGroupNum Integer32
  zxr10igmpSnoopingGroupNum Integer32
  zxr10igmpSnoopingHostTimeOut Integer32
  zxr10igmpSnoopingMrTimeOut Integer32

Zxr10InputAlarmEntry  
SEQUENCE    
  zxr10InputAlarmIndex INTEGER
  zxr10InputAlarmStatus INTEGER
  zxr10InputAlarmDescription DisplayString

Zxr10OutputAlarmEntry  
SEQUENCE    
  zxr10OutputAlarmIndex INTEGER
  zxr10OutputAlarmStatus INTEGER
  zxr10OutputAlarmDescription DisplayString

Zxr10QinQEntry  
SEQUENCE    
  zxr10QinQPortName DisplayString
  zxr10QinQMode INTEGER
  zxr10QinQTpid Integer32
  zxr10QinQPvid Integer32

Zxr10MemberShipEntry  
SEQUENCE    
  zxr10MemberShipPortName DisplayString
  zxr10MemberShipPvid Integer32
  zxr10MemberShipMode INTEGER
  zxr10MemberShipVlansTag OCTET STRING
  zxr10MemberShipVlansHybridUnTag OCTET STRING
  zxr10MemberShipVlansTag2k OCTET STRING
  zxr10MemberShipVlansHybridUnTag2k OCTET STRING
  zxr10MemberShipVlansTag3k OCTET STRING
  zxr10MemberShipVlansHybridUnTag3k OCTET STRING
  zxr10MemberShipVlansTag4k OCTET STRING
  zxr10MemberShipVlansHybridUnTag4k OCTET STRING

ZessDomainEntry  
SEQUENCE    
  zessDomainId Integer32
  zessProtectInstanceId Integer32
  zessPrimaryPort DisplayString
  zessSecondaryPort DisplayString
  zessPreupDelayTime Integer32
  zessDomainMode INTEGER
  zessDomainState INTEGER
  zessPriIfState INTEGER
  zessSecIfState INTEGER
  zessChangeTimes INTEGER
  zessClearChangeTimes INTEGER
  zessDomainRowStatus RowStatus

VctPortEntry  
SEQUENCE    
  vctPortName DisplayString
  vctIsValid INTEGER
  vctCableStatus INTEGER
  vctPair1Result DisplayString
  vctPair1Lenth DisplayString
  vctPair2Result DisplayString
  vctPair2Lenth DisplayString
  vctPair3Result DisplayString
  vctPair3Lenth DisplayString
  vctPair4Result DisplayString
  vctPair4Lenth DisplayString
  vctRowStatus RowStatus

VctEntry  
SEQUENCE    
  vctIfindex Integer32
  vctSetIfindex INTEGER
  cableStatus INTEGER
  doubleCableStatus1-2 INTEGER
  doubleCableStatus3-6 INTEGER
  doubleCableStatus4-5 INTEGER
  doubleCableStatus7-8 INTEGER
  doubleCableLength1-2 INTEGER
  doubleCableLength3-6 INTEGER
  doubleCableLength4-5 INTEGER
  doubleCableLength7-8 INTEGER

LoopdetectEntry  
SEQUENCE    
  loopdetectPanelNum Integer32
  loopdetectPortNum Integer32
  loopdetectPortName DisplayString
  loopdetectPortOperStatus INTEGER
  loopdetectPortVlan DisplayString
  loopdetectPortMonitor INTEGER
  loopdetectPortRowStatus RowStatus

Zxr10svlanEntry  
SEQUENCE    
  zxr10svlanSessionNo Integer32
  zxr10svlanDescription DisplayString
  zxr10svlanCustomerPort DisplayString
  zxr10svlanUplinkPort DisplayString
  zxr10svlanInvlan DisplayString
  zxr10svlanOvlan DisplayString
  zxr10svlanRedirect INTEGER
  zxr10svlanAdvanced INTEGER
  zxr10svlanPriority Integer32
  zxr10svlanHelperVlan DisplayString

Zxr10vfpEntry  
SEQUENCE    
  zxr10vfpInterfaceName DisplayString
  zxr10vfpSessionId Integer32
  zxr10vfpDescription DisplayString
  zxr10vfpInVlan DisplayString
  zxr10vfpAclNO Integer32
  zxr10vfpRuleNo Integer32
  zxr10vfpOvlan DisplayString
  zxr10vfpPriority Integer32
  zxr10vfpUntagAppFlag INTEGER
  zxr10vfpClassId Integer32
  zxr10vfpVrfId Integer32

DhcpIpSourceGuardEntry  
SEQUENCE    
  dhcpIpSourceGuardSlot INTEGER
  dhcpIpSourceGuardPort INTEGER
  dhcpIpSourceGuardControl INTEGER

Defined Values

zte 1.3.6.1.4.1.3902
OBJECT IDENTIFIER    

zxr10 1.3.6.1.4.1.3902.3
OBJECT IDENTIFIER    

zxr10switch 1.3.6.1.4.1.3902.3.102
OBJECT IDENTIFIER    

zxr10vlan 1.3.6.1.4.1.3902.3.102.1
OBJECT IDENTIFIER    

zxr10igmpSnooping 1.3.6.1.4.1.3902.3.102.5
OBJECT IDENTIFIER    

zxr10extAlarm 1.3.6.1.4.1.3902.3.102.6
OBJECT IDENTIFIER    

zxr10QinQ 1.3.6.1.4.1.3902.3.102.1.3
OBJECT IDENTIFIER    

zxr10MemberShip 1.3.6.1.4.1.3902.3.102.1.4
OBJECT IDENTIFIER    

zess 1.3.6.1.4.1.3902.3.102.13
OBJECT IDENTIFIER    

vct 1.3.6.1.4.1.3902.3.102.14
OBJECT IDENTIFIER    

loopdetect 1.3.6.1.4.1.3902.3.102.15
OBJECT IDENTIFIER    

svlan 1.3.6.1.4.1.3902.3.102.17
OBJECT IDENTIFIER    

vfp 1.3.6.1.4.1.3902.3.102.18
OBJECT IDENTIFIER    

dhcp 1.3.6.1.4.1.3902.3.102.23
OBJECT IDENTIFIER    

zxr10CpuVlanPvidTable 1.3.6.1.4.1.3902.3.102.1.1
vlan information table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Zxr10CpuVlanPvidEntry

zxr10CpuVlanPvidEntry 1.3.6.1.4.1.3902.3.102.1.1.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  Zxr10CpuVlanPvidEntry  

zxr10CpuVlanId 1.3.6.1.4.1.3902.3.102.1.1.1.1
The vlan id (1-4094)
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

zxr10CpuVlanIf 1.3.6.1.4.1.3902.3.102.1.1.1.2
The vlan entry -> L3 interface
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

zxr10CpuVlanMtu 1.3.6.1.4.1.3902.3.102.1.1.1.3
vlan MTU size
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..65534  

zxr10CpuVlanState 1.3.6.1.4.1.3902.3.102.1.1.1.4
vlan state:active or suspend
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER up(1), down(0)  

zxr10CpuVlanSaid 1.3.6.1.4.1.3902.3.102.1.1.1.5
Security Association Identifier(SAID)
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

zxr10CpuVlanVpnid 1.3.6.1.4.1.3902.3.102.1.1.1.6
The vlan entry -> Vpnid
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

zxr10CpuVlanRowStatus 1.3.6.1.4.1.3902.3.102.1.1.1.7
creat or delete vlan
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

zxr10CpuVlanName 1.3.6.1.4.1.3902.3.102.1.1.1.8
vlan name
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

zxr10CpuVlanMemPortsPvid 1.3.6.1.4.1.3902.3.102.1.1.1.9
pvid of port members
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

zxr10CpuVlanTagTable 1.3.6.1.4.1.3902.3.102.1.2
vlan information table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Zxr10CpuVlanTagEntry

zxr10CpuVlanTagEntry 1.3.6.1.4.1.3902.3.102.1.2.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  Zxr10CpuVlanTagEntry  

zxr10CpuVlanid 1.3.6.1.4.1.3902.3.102.1.2.1.1
The vlan id (1-4094)
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

zxr10CpuVlanvpnid 1.3.6.1.4.1.3902.3.102.1.2.1.2
The vlan entry -> Vpnid
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

zxr10CpuVlanname 1.3.6.1.4.1.3902.3.102.1.2.1.3
vlan name
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

zxr10CpuVlanMemPortsTag 1.3.6.1.4.1.3902.3.102.1.2.1.4
tag port members
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

zxr10CpuVlanUntagTable 1.3.6.1.4.1.3902.3.102.1.5
vlan information table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Zxr10CpuVlanUntagEntry

zxr10CpuVlanUntagEntry 1.3.6.1.4.1.3902.3.102.1.5.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  Zxr10CpuVlanUntagEntry  

zxr10Cpuvlanid 1.3.6.1.4.1.3902.3.102.1.5.1.1
The vlan id (1-4094)
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

zxr10CpuVlanvpnId 1.3.6.1.4.1.3902.3.102.1.5.1.2
The vlan entry -> Vpnid
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

zxr10Cpuvlanname 1.3.6.1.4.1.3902.3.102.1.5.1.3
vlan name
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

zxr10CpuVlanMemPortsUntag 1.3.6.1.4.1.3902.3.102.1.5.1.4
pvid of port members
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

zxr10IgmpSnoopingTable 1.3.6.1.4.1.3902.3.102.5.1
ZXR10 igmp snooping table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Zxr10IgmpSnoopingEntry

zxr10IgmpSnoopingEntry 1.3.6.1.4.1.3902.3.102.5.1.1
zxr10 Igmp Snooping Entry
Status: current Access: not-accessible
OBJECT-TYPE    
  Zxr10IgmpSnoopingEntry  

zxr10igmpSnoopingValid 1.3.6.1.4.1.3902.3.102.5.1.1.1
0 is invalid,1 is valid.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER invalid(0), valid(1)  

zxr10igmpSnoopingVlanId 1.3.6.1.4.1.3902.3.102.5.1.1.2
ZXR10 igmp snooping Vlan Id
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

zxr10igmpSnoopingGroupId 1.3.6.1.4.1.3902.3.102.5.1.1.3
zxr10 Igmp Snooping Entry
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

zxr10igmpSnoopingDropEnable 1.3.6.1.4.1.3902.3.102.5.1.1.4
Enabled/Disables IGMP Multicast.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enable(0), disable(1)  

zxr10igmpSnoopingMaxHostNum 1.3.6.1.4.1.3902.3.102.5.1.1.5
MAX hosts can access in this group.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

zxr10igmpSnoopingIpAddr 1.3.6.1.4.1.3902.3.102.5.1.1.6
ZXR10 igmp snooping Ip Addr
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

zxr10igmpSnoopingGroupMac 1.3.6.1.4.1.3902.3.102.5.1.1.7
ZXR10 igmp snooping Group Mac
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

zxr10igmpSnoopingMemPorts0 1.3.6.1.4.1.3902.3.102.5.1.1.8
ZXR10 igmp snooping MemPorts 0
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

zxr10igmpSnoopingMemPorts1 1.3.6.1.4.1.3902.3.102.5.1.1.9
ZXR10 igmp snooping MemPorts 1
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

zxr10igmpSnoopingMemPorts2 1.3.6.1.4.1.3902.3.102.5.1.1.10
ZXR10 igmp snooping MemPorts 2
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

zxr10igmpSnoopingMemPorts3 1.3.6.1.4.1.3902.3.102.5.1.1.11
ZXR10 igmp snooping MemPorts 3
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

zxr10igmpSnoopingMemPorts4 1.3.6.1.4.1.3902.3.102.5.1.1.12
ZXR10 igmp snooping MemPorts 4
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

zxr10igmpSnoopingMemPorts5 1.3.6.1.4.1.3902.3.102.5.1.1.13
ZXR10 igmp snooping MemPorts 5
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

zxr10igmpSnoopingMemPorts6 1.3.6.1.4.1.3902.3.102.5.1.1.14
ZXR10 igmp snooping MemPorts 6
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

zxr10igmpSnoopingMemPorts7 1.3.6.1.4.1.3902.3.102.5.1.1.15
ZXR10 igmp snooping MemPorts 7
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

zxr10igmpSnoopingMemPorts8 1.3.6.1.4.1.3902.3.102.5.1.1.16
ZXR10 igmp snooping MemPorts 8
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

zxr10igmpSnoopingMemPorts9 1.3.6.1.4.1.3902.3.102.5.1.1.17
ZXR10 igmp snooping MemPorts 9
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

zxr10igmpSnoopingMemPorts10 1.3.6.1.4.1.3902.3.102.5.1.1.18
ZXR10 igmp snooping MemPorts 10
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

zxr10igmpSnoopingMemPorts11 1.3.6.1.4.1.3902.3.102.5.1.1.19
ZXR10 igmp snooping MemPorts 11
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

zxr10igmpSnoopingMemPorts12 1.3.6.1.4.1.3902.3.102.5.1.1.20
ZXR10 igmp snooping MemPorts 12
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

zxr10pimSnoopingMemPorts0 1.3.6.1.4.1.3902.3.102.5.1.1.31
zxr10 pim Snooping MemPorts 0
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

zxr10pimSnoopingMemPorts1 1.3.6.1.4.1.3902.3.102.5.1.1.32
zxr10 pim Snooping MemPorts 1
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

zxr10pimSnoopingMemPorts2 1.3.6.1.4.1.3902.3.102.5.1.1.33
zxr10 pim Snooping MemPorts 2
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

zxr10pimSnoopingMemPorts3 1.3.6.1.4.1.3902.3.102.5.1.1.34
zxr10 pim Snooping MemPorts 3
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

zxr10pimSnoopingMemPorts4 1.3.6.1.4.1.3902.3.102.5.1.1.35
zxr10 pim Snooping MemPorts 4
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

zxr10pimSnoopingMemPorts5 1.3.6.1.4.1.3902.3.102.5.1.1.36
zxr10 pim Snooping MemPorts 5
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

zxr10pimSnoopingMemPorts6 1.3.6.1.4.1.3902.3.102.5.1.1.37
zxr10 pim Snooping MemPorts 6
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

zxr10pimSnoopingMemPorts7 1.3.6.1.4.1.3902.3.102.5.1.1.38
zxr10 pim Snooping MemPorts 7
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

zxr10pimSnoopingMemPorts8 1.3.6.1.4.1.3902.3.102.5.1.1.39
zxr10 pim Snooping MemPorts 8
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

zxr10pimSnoopingMemPorts9 1.3.6.1.4.1.3902.3.102.5.1.1.40
zxr10 pim Snooping MemPorts 9
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

zxr10pimSnoopingMemPorts10 1.3.6.1.4.1.3902.3.102.5.1.1.41
zxr10 pim Snooping MemPorts 10
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

zxr10pimSnoopingMemPorts11 1.3.6.1.4.1.3902.3.102.5.1.1.42
zxr10 pim Snooping MemPorts 11
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

zxr10pimSnoopingMemPorts12 1.3.6.1.4.1.3902.3.102.5.1.1.43
zxr10 pim Snooping MemPorts 12
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

zxr10PimSnoopingNeighborTable 1.3.6.1.4.1.3902.3.102.5.2
ZXR10 pim snooping neighbor table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Zxr10PimSnoopingNeighborEntry

zxr10PimSnoopingNeighborEntry 1.3.6.1.4.1.3902.3.102.5.2.1
zxr10 Pim Snooping Neighbor Entry
Status: current Access: not-accessible
OBJECT-TYPE    
  Zxr10PimSnoopingNeighborEntry  

zxr10pimSnoopingNeighborValid 1.3.6.1.4.1.3902.3.102.5.2.1.1
0 is invalid,1 is valid.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER invalid(0), valid(1)  

zxr10pimSnoopingNeighborVlanId 1.3.6.1.4.1.3902.3.102.5.2.1.2
zxr10 pim Snooping Neighbor Vlan Id
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

zxr10pimSnoopingNeighborVpnId 1.3.6.1.4.1.3902.3.102.5.2.1.3
zxr10 pim Snooping Neighbor Vpn Id
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

zxr10pimSnoopingNeighborId 1.3.6.1.4.1.3902.3.102.5.2.1.4
zxr10 pim Snooping Neighbor Id
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

zxr10pimSnoopingNeighborSourceIpAddr 1.3.6.1.4.1.3902.3.102.5.2.1.5
zxr10 pim Snooping Neighbor Source Ip Addr
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

zxr10pimSnoopingNeighborPort 1.3.6.1.4.1.3902.3.102.5.2.1.6
zxr10 pim Snooping Neighbor Port
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

zxr10IgmpSnoopingVlanTable 1.3.6.1.4.1.3902.3.102.5.3
ZXR10 igmp snooping vlan table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Zxr10IgmpSnoopingVlanEntry

zxr10IgmpSnoopingVlanEntry 1.3.6.1.4.1.3902.3.102.5.3.1
zxr10 Igmp Snooping Vlan Entry
Status: current Access: not-accessible
OBJECT-TYPE    
  Zxr10IgmpSnoopingVlanEntry  

zxr10igmpSnoopingVlanEntryVlanId 1.3.6.1.4.1.3902.3.102.5.3.1.1
zxr10 igmp Snooping Vlan Entry Vlan Id
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

zxr10igmpSnoopingVlanEntryEnable 1.3.6.1.4.1.3902.3.102.5.3.1.2
Enables/disables IGMP Snooping on this vlan
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enable(0), disable(1)  

zxr10pimSnoopingVlanEntryEnable 1.3.6.1.4.1.3902.3.102.5.3.1.3
Enables/disables PIM Snooping on this vlan
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enable(0), disable(1)  

zxr10igmpSnoopingFastLeave 1.3.6.1.4.1.3902.3.102.5.3.1.4
Enables/disables group membership fast leave
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER fast-leave(0), slow-leave(1)  

zxr10igmpSnoopingLastMemberQueryInterval 1.3.6.1.4.1.3902.3.102.5.3.1.5
The Last Member Query Interval is the Max Response Time inserted into Group-Specific Queries sent in response to Leave Group messages, and is also the amount of time between Group-Specific Query messages.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

zxr10igmpSnoopingMaxGroupNum 1.3.6.1.4.1.3902.3.102.5.3.1.6
MAX multicast groups can access in this vlan
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

zxr10igmpSnoopingGroupNum 1.3.6.1.4.1.3902.3.102.5.3.1.7
Number of multicast groups access in this vlan currently
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

zxr10igmpSnoopingHostTimeOut 1.3.6.1.4.1.3902.3.102.5.3.1.8
Host aging-time
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

zxr10igmpSnoopingMrTimeOut 1.3.6.1.4.1.3902.3.102.5.3.1.9
Router aging-time
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

zxr10igmpSnoopingEnable 1.3.6.1.4.1.3902.3.102.5.4
Enables/disables IGMP Snooping on this device
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enable(0), disable(1)  

zxr10pimSnoopingEnable 1.3.6.1.4.1.3902.3.102.5.5
Enables/disables PIM Snooping on this device
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enable(0), disable(1)  

zxr10igmpSnoopingGlobalQuery 1.3.6.1.4.1.3902.3.102.5.6
Enabled/Disables IGMP Queries for this device
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enable(0), disable(1)  

zxr10igmpSnoopingQueryInterval 1.3.6.1.4.1.3902.3.102.5.7
The Query Interval is the interval between General Queries sent by the Querier. Default: 125 seconds.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

zxr10igmpSnoopingQueryResponseInterval 1.3.6.1.4.1.3902.3.102.5.8
The Max Response Time inserted into the periodic General Queries
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

zxr10InputAlarmTable 1.3.6.1.4.1.3902.3.102.6.1
the table of input alarm.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Zxr10InputAlarmEntry

zxr10InputAlarmEntry 1.3.6.1.4.1.3902.3.102.6.1.1
the table of input alarm.
Status: current Access: not-accessible
OBJECT-TYPE    
  Zxr10InputAlarmEntry  

zxr10InputAlarmIndex 1.3.6.1.4.1.3902.3.102.6.1.1.1
the type of alarm.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

zxr10InputAlarmStatus 1.3.6.1.4.1.3902.3.102.6.1.1.2
the status of alarm.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER alarm(1), clear(0)  

zxr10InputAlarmDescription 1.3.6.1.4.1.3902.3.102.6.1.1.3
the description of alarm.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..255)  

zxr10OutputAlarmTable 1.3.6.1.4.1.3902.3.102.6.2
the table of input alarm.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Zxr10OutputAlarmEntry

zxr10OutputAlarmEntry 1.3.6.1.4.1.3902.3.102.6.2.1
the table of input alarm.
Status: current Access: not-accessible
OBJECT-TYPE    
  Zxr10OutputAlarmEntry  

zxr10OutputAlarmIndex 1.3.6.1.4.1.3902.3.102.6.2.1.1
the type of alarm.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

zxr10OutputAlarmStatus 1.3.6.1.4.1.3902.3.102.6.2.1.2
the status of alarm.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER alarm(1), clear(0)  

zxr10OutputAlarmDescription 1.3.6.1.4.1.3902.3.102.6.2.1.3
the description of alarm.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..255)  

zxr10QinQTable 1.3.6.1.4.1.3902.3.102.1.3.1
switchport qinq(802.1q in 802.1q) configuration table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Zxr10QinQEntry

zxr10QinQEntry 1.3.6.1.4.1.3902.3.102.1.3.1.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  Zxr10QinQEntry  

zxr10QinQPortName 1.3.6.1.4.1.3902.3.102.1.3.1.1.1
Name of this port
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

zxr10QinQMode 1.3.6.1.4.1.3902.3.102.1.3.1.1.2
The qinq mode of switchport
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER normal(0), customer(1), uplink(2)  

zxr10QinQTpid 1.3.6.1.4.1.3902.3.102.1.3.1.1.3
The qinq tpid of switchport
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

zxr10QinQPvid 1.3.6.1.4.1.3902.3.102.1.3.1.1.4
The native vlan id of switchport
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

zxr10QinQExtendTpid 1.3.6.1.4.1.3902.3.102.1.3.2
The extend qinq tpid
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

zxr10QinQStandardTpid 1.3.6.1.4.1.3902.3.102.1.3.3
The standard qinq tpid
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

zxr10MemberShipTable 1.3.6.1.4.1.3902.3.102.1.4.1
vlan membership information table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Zxr10MemberShipEntry

zxr10MemberShipEntry 1.3.6.1.4.1.3902.3.102.1.4.1.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  Zxr10MemberShipEntry  

zxr10MemberShipPortName 1.3.6.1.4.1.3902.3.102.1.4.1.1.1
Name of this port
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

zxr10MemberShipPvid 1.3.6.1.4.1.3902.3.102.1.4.1.1.2
The native vlan id of this interface
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

zxr10MemberShipMode 1.3.6.1.4.1.3902.3.102.1.4.1.1.3
Vlan mode of this interface.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER access(0), trunk(1), hybrid(2)  

zxr10MemberShipVlansTag 1.3.6.1.4.1.3902.3.102.1.4.1.1.4
vlan tag bitMap (1-1023)
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..128)  

zxr10MemberShipVlansHybridUnTag 1.3.6.1.4.1.3902.3.102.1.4.1.1.5
vlan untag bitMap(1-1023) of hybrid ports
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..128)  

zxr10MemberShipVlansTag2k 1.3.6.1.4.1.3902.3.102.1.4.1.1.6
vlan bitMap (1024-2047)
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..128)  

zxr10MemberShipVlansHybridUnTag2k 1.3.6.1.4.1.3902.3.102.1.4.1.1.7
vlan untag bitMap(1024-2047) of hybrid ports
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..128)  

zxr10MemberShipVlansTag3k 1.3.6.1.4.1.3902.3.102.1.4.1.1.8
vlan tag bitMap (2048-3071)
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..128)  

zxr10MemberShipVlansHybridUnTag3k 1.3.6.1.4.1.3902.3.102.1.4.1.1.9
vlan untag bitMap(2048-3071) of hybrid ports
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..128)  

zxr10MemberShipVlansTag4k 1.3.6.1.4.1.3902.3.102.1.4.1.1.10
vlan tag bitMap (3072-4094)
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..128)  

zxr10MemberShipVlansHybridUnTag4k 1.3.6.1.4.1.3902.3.102.1.4.1.1.11
vlan untag bitMap(3072-4094) of hybrid ports
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..128)  

zessClearAllChangeTimes 1.3.6.1.4.1.3902.3.102.13.1
Clear all zessChangeTimes of the domain table.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER reset(1)  

zessDomainTable 1.3.6.1.4.1.3902.3.102.13.2
A table that contains ZESS domain info.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ZessDomainEntry

zessDomainEntry 1.3.6.1.4.1.3902.3.102.13.2.1
A list of entries of ZESS domain information.
Status: current Access: not-accessible
OBJECT-TYPE    
  ZessDomainEntry  

zessDomainId 1.3.6.1.4.1.3902.3.102.13.2.1.1
The id of a ZESS domain.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..4  

zessProtectInstanceId 1.3.6.1.4.1.3902.3.102.13.2.1.2
The protect instance id of a ZESS domain.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..16  

zessPrimaryPort 1.3.6.1.4.1.3902.3.102.13.2.1.3
The primary port name of the domain.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

zessSecondaryPort 1.3.6.1.4.1.3902.3.102.13.2.1.4
The second port name of the domain.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

zessPreupDelayTime 1.3.6.1.4.1.3902.3.102.13.2.1.5
The preup deley time of the domain, it's default value is 2s.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 1..600  

zessDomainMode 1.3.6.1.4.1.3902.3.102.13.2.1.6
The mode of the domain.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER revertive(0), nonrevertive(1)  

zessDomainState 1.3.6.1.4.1.3902.3.102.13.2.1.7
The state of the domain.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unknown(0), up(1), down(2), init(3), preup(4)  

zessPriIfState 1.3.6.1.4.1.3902.3.102.13.2.1.8
The state of the primary port.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unknown(0), block(1), forward(3)  

zessSecIfState 1.3.6.1.4.1.3902.3.102.13.2.1.9
The state of the second port.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unknown(0), block(1), forward(3)  

zessChangeTimes 1.3.6.1.4.1.3902.3.102.13.2.1.10
The change times of the domain.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

zessClearChangeTimes 1.3.6.1.4.1.3902.3.102.13.2.1.11
Clear zessChangeTimes of the domain.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER reset(1)  

zessDomainRowStatus 1.3.6.1.4.1.3902.3.102.13.2.1.12
The RowStatus of this row instance.It could be used for creating,modify or remove instance. createAndGo(4) is to create primary port and secondary port for a domain, destroy(6) is to delete a domain, notInService(2) is to delete primary port and secondary port in a domain.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

vctPortTable 1.3.6.1.4.1.3902.3.102.14.1
The table of all ports' virtual cable test.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VctPortEntry

vctPortEntry 1.3.6.1.4.1.3902.3.102.14.1.1
Each entry contains port config for VCT.
Status: current Access: not-accessible
OBJECT-TYPE    
  VctPortEntry  

vctPortName 1.3.6.1.4.1.3902.3.102.14.1.1.1
The port name to index vct config.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..32)  

vctIsValid 1.3.6.1.4.1.3902.3.102.14.1.1.2
0 means invalid,may be get message fail. 1 means valid
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER invalid(0), valid(1)  

vctCableStatus 1.3.6.1.4.1.3902.3.102.14.1.1.3
This item indicates vct CableStatus. default fault
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER good(0), fault(1), not-support(2)  

vctPair1Result 1.3.6.1.4.1.3902.3.102.14.1.1.4
This item indicates the cable status: open, short or impedance mismatch.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..10)  

vctPair1Lenth 1.3.6.1.4.1.3902.3.102.14.1.1.5
This item indicates fault position.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..10)  

vctPair2Result 1.3.6.1.4.1.3902.3.102.14.1.1.6
This item indicates the cable status: open, short or impedance mismatch.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..10)  

vctPair2Lenth 1.3.6.1.4.1.3902.3.102.14.1.1.7
This item indicates fault position.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..10)  

vctPair3Result 1.3.6.1.4.1.3902.3.102.14.1.1.8
This item indicates the cable status: open, short or impedance mismatch.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..10)  

vctPair3Lenth 1.3.6.1.4.1.3902.3.102.14.1.1.9
This item indicates fault position.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..10)  

vctPair4Result 1.3.6.1.4.1.3902.3.102.14.1.1.10
This item indicates the cable status: open, short or impedance mismatch.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..10)  

vctPair4Lenth 1.3.6.1.4.1.3902.3.102.14.1.1.11
This item indicates fault position.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..10)  

vctRowStatus 1.3.6.1.4.1.3902.3.102.14.1.1.12
The RowStatus of this row instance.It could be used for creating instance.createAndGo(4) is to create a new row.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

vctTable 1.3.6.1.4.1.3902.3.102.14.2
The vctTable contains the parameter of cable.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VctEntry

vctEntry 1.3.6.1.4.1.3902.3.102.14.2.1
The parameter list of cable.
Status: current Access: not-accessible
OBJECT-TYPE    
  VctEntry  

vctIfindex 1.3.6.1.4.1.3902.3.102.14.2.1.1
The ifindex of port,it is same to ifindex.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

vctSetIfindex 1.3.6.1.4.1.3902.3.102.14.2.1.2
The ifindex of port, which need to be checked.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(0)  

cableStatus 1.3.6.1.4.1.3902.3.102.14.2.1.3
The status of cable, either good or fault.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER good(1), fault(0)  

doubleCableStatus1-2 1.3.6.1.4.1.3902.3.102.14.2.1.4
The status of cable pair 1-2.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER good(0), open(1), short(2), broken(3), mismatch(4), fail(5), unknown(6), null(7)  

doubleCableStatus3-6 1.3.6.1.4.1.3902.3.102.14.2.1.5
The status of cable pair 3-6.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER good(0), open(1), short(2), broken(3), mismatch(4), fail(5), unknown(6), null(7)  

doubleCableStatus4-5 1.3.6.1.4.1.3902.3.102.14.2.1.6
The status of cable pair 4-5.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER good(0), open(1), short(2), broken(3), mismatch(4), fail(5), unknown(6), null(7)  

doubleCableStatus7-8 1.3.6.1.4.1.3902.3.102.14.2.1.7
The status of cable pair 7-8.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER good(0), open(1), short(2), broken(3), mismatch(4), fail(5), unknown(6), null(7)  

doubleCableLength1-2 1.3.6.1.4.1.3902.3.102.14.2.1.8
The length of cable pair 1-2.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER lessthan50(200), from50to80(201), from80to110(202), from110to140(203), morethan140(204), unknow(205), null(206)  

doubleCableLength3-6 1.3.6.1.4.1.3902.3.102.14.2.1.9
The length of cable pair 3-6.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER lessthan50(200), from50to80(201), from80to110(202), from110to140(203), morethan140(204), unknow(205), null(206)  

doubleCableLength4-5 1.3.6.1.4.1.3902.3.102.14.2.1.10
The length of cable pair 4-5.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER lessthan50(200), from50to80(201), from80to110(202), from110to140(203), morethan140(204), unknow(205), null(206)  

doubleCableLength7-8 1.3.6.1.4.1.3902.3.102.14.2.1.11
The length of cable pair 7-8.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER lessthan50(200), from50to80(201), from80to110(202), from110to140(203), morethan140(204), unknow(205), null(206)  

loopdetectReopenTime 1.3.6.1.4.1.3902.3.102.15.1
The delay(minute) reopenning the interface after it was shut down. default 10 minute
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..16777216  

loopdetectTable 1.3.6.1.4.1.3902.3.102.15.2
The parameter which the loopdetectTable contains.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    LoopdetectEntry

loopdetectEntry 1.3.6.1.4.1.3902.3.102.15.2.1
The parameter list shows the happened loopdetect.
Status: current Access: not-accessible
OBJECT-TYPE    
  LoopdetectEntry  

loopdetectPanelNum 1.3.6.1.4.1.3902.3.102.15.2.1.1
panel num .
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..12  

loopdetectPortNum 1.3.6.1.4.1.3902.3.102.15.2.1.2
port num .
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..48  

loopdetectPortName 1.3.6.1.4.1.3902.3.102.15.2.1.3
The name of port, it is same to ifindex.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

loopdetectPortOperStatus 1.3.6.1.4.1.3902.3.102.15.2.1.4
The status of the port.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER normal(0), protect(1), block(2)  

loopdetectPortVlan 1.3.6.1.4.1.3902.3.102.15.2.1.5
The vlan list which the loopdetect port belong to.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..40)  

loopdetectPortMonitor 1.3.6.1.4.1.3902.3.102.15.2.1.6
The loopdetect protocol enable/disable.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enable(1), disable(0)  

loopdetectPortRowStatus 1.3.6.1.4.1.3902.3.102.15.2.1.7
The RowStatus of this row instance.It could be used for creating, modify instance.createAndGo(4) is to create a new row.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

zxr10svlanCount 1.3.6.1.4.1.3902.3.102.17.10
The count of svlan session which has been used.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..4000  

zxr10svlanFreeCount 1.3.6.1.4.1.3902.3.102.17.11
The count of svlan session which has been not used.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..4000  

zxr10svlanTable 1.3.6.1.4.1.3902.3.102.17.12
A table that contains SVLAN session config info.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Zxr10svlanEntry

zxr10svlanEntry 1.3.6.1.4.1.3902.3.102.17.12.1
A list of entries of SVLAN session config information.
Status: current Access: not-accessible
OBJECT-TYPE    
  Zxr10svlanEntry  

zxr10svlanSessionNo 1.3.6.1.4.1.3902.3.102.17.12.1.1
The session number of a session.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..4000  

zxr10svlanDescription 1.3.6.1.4.1.3902.3.102.17.12.1.2
The description of a session.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..30)  

zxr10svlanCustomerPort 1.3.6.1.4.1.3902.3.102.17.12.1.3
The customer port name of a session.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..32)  

zxr10svlanUplinkPort 1.3.6.1.4.1.3902.3.102.17.12.1.4
The uplink port name of a session.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..32)  

zxr10svlanInvlan 1.3.6.1.4.1.3902.3.102.17.12.1.5
svlan invlan ID,if invlan doesn't have value, this string will be null.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..254)  

zxr10svlanOvlan 1.3.6.1.4.1.3902.3.102.17.12.1.6
The out vlan id of a session in no inner tag mode, if outvlan doesn't have value, this string will be null.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..31)  

zxr10svlanRedirect 1.3.6.1.4.1.3902.3.102.17.12.1.7
The undirect flag of a session, default value 255 means redirect.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER undirect(1)  

zxr10svlanAdvanced 1.3.6.1.4.1.3902.3.102.17.12.1.8
The advanced flag of a session, 0--normal,1--special,default value 255 means not config.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER normal(0), special(1)  

zxr10svlanPriority 1.3.6.1.4.1.3902.3.102.17.12.1.9
Svlan priority can be mapping(8) or be a number of 0..7, default value 255 means that priority has no value.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..8  

zxr10svlanHelperVlan 1.3.6.1.4.1.3902.3.102.17.12.1.10
Svlan helper vlan ID, if helper vlan ID doesn't have value, this string will be null.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..31)  

zxr10vfpTable 1.3.6.1.4.1.3902.3.102.18.1
A table that contains VFP session config info.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Zxr10vfpEntry

zxr10vfpEntry 1.3.6.1.4.1.3902.3.102.18.1.1
A list of entries of VFP session config information.
Status: current Access: not-accessible
OBJECT-TYPE    
  Zxr10vfpEntry  

zxr10vfpInterfaceName 1.3.6.1.4.1.3902.3.102.18.1.1.1
The interface name in a session.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..32)  

zxr10vfpSessionId 1.3.6.1.4.1.3902.3.102.18.1.1.2
The session id of a session.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..4000  

zxr10vfpDescription 1.3.6.1.4.1.3902.3.102.18.1.1.3
The description of a session.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..30)  

zxr10vfpInVlan 1.3.6.1.4.1.3902.3.102.18.1.1.4
Svlan invlan ID,if invlan doesn't have value, this string will be null.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..254)  

zxr10vfpAclNO 1.3.6.1.4.1.3902.3.102.18.1.1.5
Acl number of a session.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..2999  

zxr10vfpRuleNo 1.3.6.1.4.1.3902.3.102.18.1.1.6
Rule number of a session.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..100  

zxr10vfpOvlan 1.3.6.1.4.1.3902.3.102.18.1.1.7
The out vlan id of a session in no inner tag mode, if outvlan doesn't have value, this string will be null.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..31)  

zxr10vfpPriority 1.3.6.1.4.1.3902.3.102.18.1.1.8
Svlan priority can be mapping(8) or be a number of 0..7, default value 255 means that priority has no value.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..8  

zxr10vfpUntagAppFlag 1.3.6.1.4.1.3902.3.102.18.1.1.9
0--global,1--pinpoint,2--notconfig,default value 255 means not config.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER global(0), pinpoint(1)  

zxr10vfpClassId 1.3.6.1.4.1.3902.3.102.18.1.1.10
Classid of a session,default value 255 means that classid has no value.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..31  

zxr10vfpVrfId 1.3.6.1.4.1.3902.3.102.18.1.1.11
Vrfid of a session,default value 255 means that vrfid has no value.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..63  

dhcpIpSourceGuardIfNumber 1.3.6.1.4.1.3902.3.102.23.1
It shows how many ports enable ip-source-guard configure
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

dhcpIpSourceGuardTable 1.3.6.1.4.1.3902.3.102.23.2
Control the ip-source-guard configure,
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DhcpIpSourceGuardEntry

dhcpIpSourceGuardEntry 1.3.6.1.4.1.3902.3.102.23.2.1
Control the ip-source-guard configure,
Status: current Access: not-accessible
OBJECT-TYPE    
  DhcpIpSourceGuardEntry  

dhcpIpSourceGuardSlot 1.3.6.1.4.1.3902.3.102.23.2.1.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER  

dhcpIpSourceGuardPort 1.3.6.1.4.1.3902.3.102.23.2.1.2
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER  

dhcpIpSourceGuardControl 1.3.6.1.4.1.3902.3.102.23.2.1.3
Control the ip-source-guard configure, if 0, disable current function; if 1, ip-source-guard is based on ip; if 2, ip-source-guard is based on mac; if 3, ip-source-guard is based on mac and ip.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), ip-base(1), mac-base(2), mac-ip-base(3)  

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor