ZXR10-ROUTE-MAP-MIB

File: ZXR10-ROUTE-MAP-MIB.mib (223036 bytes)

Imported modules

SNMPv2-SMI SNMPv2-CONF SNMPv2-TC
IPV6-TC ZXR10-SMI

Imported symbols

MODULE-IDENTITY OBJECT-TYPE NOTIFICATION-TYPE
Integer32 Unsigned32 Counter32
enterprises IpAddress MODULE-COMPLIANCE
OBJECT-GROUP NOTIFICATION-GROUP DisplayString
MacAddress TEXTUAL-CONVENTION RowStatus
TruthValue Ipv6Address zxr10
zxr10RosngMIB

Defined Types

RmapPermitDeny  
permit = 0,deny = 1.
TEXTUAL-CONVENTION    
  INTEGER permit(1), deny(2)  

RmapPrependReplace  
prepend = 1,replace = 2.
TEXTUAL-CONVENTION    
  INTEGER prepend(1), replace(2)  

RmapSetMetricAct  
plus(+) = 1,minus(-) = 2.
TEXTUAL-CONVENTION    
  INTEGER plus(1), minus(2)  

RmapSetMetricType  
external IS-IS external metric internal IS-IS internal metric type-1 OSPF external type 1 metric type-2 OSPF external type 2 metric
TEXTUAL-CONVENTION    
  INTEGER internal(1), external(2), type-1(3), type-2(4)  

RmapSetLevel  
level-1 Import into a level-1 area level-1-2 Import into level-1 and level-2 level-2 Import into level-2 sub-domain
TEXTUAL-CONVENTION    
  INTEGER level-1(1), level-2(2), level-1-2(3)  

RmapSetOrigin  
egp(1) Remote EGP igp(0) Local IGP incomplete(2) Unknown heritage
TEXTUAL-CONVENTION    
  INTEGER igp(1), egp(2), incomplete(3)  

RmapMatchRouteType  
local Locally generated route.Value is 1. internal Internal route (including OSPF intra/inter area).Value is 2. level-1 IS-IS level-1 route.Value is 3. level-2 IS-IS level-2 route.Value is 4. external External route (OSPF type 1/2).Value is 5. type-1 OSPF external type 1 route.Value is 6. type-2 OSPF external type 2 route.Value is 7. ebgp External border gateway protocol(EBGP) route.Value is 8. ibgp Internal border gateway protocol(IBGP) route.Value is 9. static Static route.Value is 10. bgp-agg BGP aggregate route.Value is 11.
TEXTUAL-CONVENTION    
  INTEGER local(1), internal(2), level-1(3), level-2(4), external(5), type-1(6), type-2(7), ebgp(8), ibgp(9), static(10), bgp-agg(11)  

RmapSetComm  
additive Add to the existing community. Value is 5. internet Internet(Well known community). Value is 4. no-advertise Do not advertise to any peer. Value is 2. no-export Do not export to next AS. Value is 1. no-export-subconfed Do not send outside local AS. Value is 3. none No community attribute. Value is 6.
TEXTUAL-CONVENTION    
  INTEGER no-export(1), no-advertise(2), no-export-subconfed(3), internet(4), additive(5), none(6)  

RmapSetRt  
additive Add to the existing extcommunity.Value is 6. remove Remove the existing extcommunity.Value is 7.
TEXTUAL-CONVENTION    
  INTEGER additive(6), remove(7)  

RmapSetPrec  
critical Set critical precedence (6) flash Set flash precedence (4) flash-override Set flash override precedence (5) immediate Set immediate precedence (3) internet Set internetwork control precedence (7) network Set network control precedence (8) priority Set priority precedence (2) routine Set routine precedence (1)
TEXTUAL-CONVENTION    
  INTEGER routine(1), priority(2), immediate(3), flash(4), flash-override(5), critical(6), internet(7), network(8)  

RmapSetTos  
max-reliability Set max reliable TOS (3) max-throughput Set max throughput TOS (4) min-delay Set min delay TOS (5) min-monetary-cost Set min monetary cost TOS (2) normal Set normal TOS (1)
TEXTUAL-CONVENTION    
  INTEGER normal(1), min-monetary-cost(2), max-reliability(3), max-throughput(4), min-delay(5)  

RmapSetGlobalIpConst  
The Value is 3.
TEXTUAL-CONVENTION    
  INTEGER ipconst(3)  

RmapSetGlobalNextHopConst  
The Value is 1.
TEXTUAL-CONVENTION    
  INTEGER nexthopconst(1)  

RmapSetVrfIpConst  
The Value is 1.
TEXTUAL-CONVENTION    
  INTEGER vrfipconst(1)  

RmapSetVrfNextHopConst  
The Value is 2.
TEXTUAL-CONVENTION    
  INTEGER vrfnexthopconst(2)  

RmapMatchAlg  
eq = 1,ge = 2,le = 3.
TEXTUAL-CONVENTION    
  INTEGER eq(1), ge(2), le(3)  

RmapSetPath  
all Path for imitating iBGP full-mesh backup Path for rapid convergence best-path Path for load sharing group-best Path for elimination of routing oscillation
TEXTUAL-CONVENTION    
  INTEGER all(1), backup(2), best-path(3), group-best(4)  

RmapSetPathInstall  
The Value is 1.
TEXTUAL-CONVENTION    
  INTEGER install(1)  

RmapSetPathMulpro  
The Value is 2.
TEXTUAL-CONVENTION    
  INTEGER multipath-protect(2)  

RmapSetPathAdvertise  
The Value is 3.
TEXTUAL-CONVENTION    
  INTEGER advertise(3)  

Zxr10RMAPNameEntry  
SEQUENCE    
  zxr10RMAPName DisplayString
  zxr10RMAPSequence Integer32
  zxr10RMAPAction RmapPermitDeny
  zxr10RMAPRowStatus RowStatus

Zxr10RMAPMatchAspathEntry  
SEQUENCE    
  zxr10RMAPAspathName DisplayString
  zxr10RMAPAspathSequence Integer32
  zxr10RMAPAspathNo Integer32
  zxr10RMAPAspathMatchName DisplayString
  zxr10RMAPAspathRowStatus RowStatus

Zxr10RMAPMatchCommunityEntry  
SEQUENCE    
  zxr10RMAPCommunityName DisplayString
  zxr10RMAPCommunitySequence Integer32
  zxr10RMAPCommunityNo Integer32
  zxr10RMAPCommunityMatchName DisplayString
  zxr10RMAPCommunityRowStatus RowStatus

Zxr10RMAPMatchExtCommunityEntry  
SEQUENCE    
  zxr10RMAPExtCommunityName DisplayString
  zxr10RMAPExtCommunitySequence Integer32
  zxr10RMAPExtCommunityNo Integer32
  zxr10RMAPExtCommunityMatchName DisplayString
  zxr10RMAPExtCommunityRowStatus RowStatus

Zxr10RMAPMatchInterfaceEntry  
SEQUENCE    
  zxr10RMAPInterfaceName DisplayString
  zxr10RMAPInterfaceSequence Integer32
  zxr10RMAPInterface DisplayString
  zxr10RMAPInterfaceRowStatus RowStatus

Zxr10RMAPMatchIpAddressAclEntry  
SEQUENCE    
  zxr10RMAPMatchAclName DisplayString
  zxr10RMAPMatchAclSequence Integer32
  zxr10RMAPAclName DisplayString
  zxr10RMAPIsConfigAcl TruthValue
  zxr10RMAPMatchAclRowStatus RowStatus

Zxr10RMAPMatchIpAddressPflEntry  
SEQUENCE    
  zxr10RMAPMatchPflName DisplayString
  zxr10RMAPMatchPflSequence Integer32
  zxr10RMAPPflName DisplayString
  zxr10RMAPIsConfigPfl TruthValue
  zxr10RMAPMatchPflRowStatus RowStatus

Zxr10RMAPMatchIpMetricEntry  
SEQUENCE    
  zxr10RMAPIpMetricName DisplayString
  zxr10RMAPIpMetricSequence Integer32
  zxr10RMAPIpMetric Unsigned32
  zxr10RMAPIpMetricRowStatus RowStatus

Zxr10RMAPMatchIpNextHopEntry  
SEQUENCE    
  zxr10RMAPIpNextHopName DisplayString
  zxr10RMAPIpNextHopSequence Integer32
  zxr10RMAPIpNextHop DisplayString
  zxr10RMAPIpNextHopRowStatus RowStatus

Zxr10RMAPMatchIpTagEntry  
SEQUENCE    
  zxr10RMAPIpTagName DisplayString
  zxr10RMAPIpTagSequence Integer32
  zxr10RMAPIpTag Unsigned32
  zxr10RMAPIpTagRowStatus RowStatus

Zxr10RMAPMatchIpv6AddressEntry  
SEQUENCE    
  zxr10RMAPIpv6AddressName DisplayString
  zxr10RMAPIpv6AddressSequence Integer32
  zxr10RMAPIpv6Address DisplayString
  zxr10RMAPIpv6AddressRowStatus RowStatus

Zxr10RMAPMatchIpv6AddrPflEntry  
SEQUENCE    
  zxr10RMAPIpv6AddrPflName DisplayString
  zxr10RMAPIpv6AddrPflSequence Integer32
  zxr10RMAPIpv6AddrPfl DisplayString
  zxr10RMAPIpv6IsConfigPfl TruthValue
  zxr10RMAPIpv6AddrPflRowStatus RowStatus

Zxr10RMAPMatchIpv6MetricEntry  
SEQUENCE    
  zxr10RMAPIpv6MetricName DisplayString
  zxr10RMAPIpv6MetricSequence Integer32
  zxr10RMAPIpv6Metric Unsigned32
  zxr10RMAPIpv6MetricRowStatus RowStatus

Zxr10RMAPMatchIpv6NextHopEntry  
SEQUENCE    
  zxr10RMAPIpv6NextHopName DisplayString
  zxr10RMAPIpv6NextHopSequence Integer32
  zxr10RMAPIpv6NextHop DisplayString
  zxr10RMAPIpv6NextHopRowStatus RowStatus

Zxr10RMAPMatchIpv6TagEntry  
SEQUENCE    
  zxr10RMAPIpv6TagName DisplayString
  zxr10RMAPIpv6TagSequence Integer32
  zxr10RMAPIpv6Tag Unsigned32
  zxr10RMAPIpv6TagRowStatus RowStatus

Zxr10RMAPMatchRdEntry  
SEQUENCE    
  zxr10RMAPMatchRdName DisplayString
  zxr10RMAPMatchRdSequence Integer32
  zxr10RMAPMatchRd Integer32
  zxr10RMAPMatchRdRowStatus RowStatus

Zxr10RMAPMatchRouteTypeEntry  
SEQUENCE    
  zxr10RMAPMatchRouteTypeName DisplayString
  zxr10RMAPMatchRouteTypeSequence Integer32
  zxr10RMAPMatchRouteType RmapMatchRouteType
  zxr10RMAPMatchExternType RmapMatchRouteType
  zxr10RMAPMatchRouteTypeRowStatus RowStatus

Zxr10RMAPSetAspathEntry  
SEQUENCE    
  zxr10RMAPSetAspathName DisplayString
  zxr10RMAPSetAspathSequence Integer32
  zxr10RMAPSetAspathAsnd1 Unsigned32
  zxr10RMAPSetAspathAsnd2 Unsigned32
  zxr10RMAPSetAspathAsnd3 Unsigned32
  zxr10RMAPSetAspathAsnd4 Unsigned32
  zxr10RMAPSetAspathAsnd5 Unsigned32
  zxr10RMAPSetAspathAsnd6 Unsigned32
  zxr10RMAPSetAspathAsnd7 Unsigned32
  zxr10RMAPSetAspathAsnd8 Unsigned32
  zxr10RMAPSetAspathAsnd9 Unsigned32
  zxr10RMAPSetAspathAsnd10 Unsigned32
  zxr10RMAPSetAspathPrepOrRep RmapPrependReplace
  zxr10RMAPSetAspathRowStatus RowStatus

Zxr10RMAPSetCommunityConstEntry  
SEQUENCE    
  zxr10RMAPSetCommName DisplayString
  zxr10RMAPSetCommSequence Integer32
  zxr10RMAPSetCommIsAddtive RmapSetComm
  zxr10RMAPSetCommConstVal RmapSetComm
  zxr10RMAPSetCommConstRowStatus RowStatus

Zxr10RMAPSetCommunityAsnnEntry  
SEQUENCE    
  zxr10RMAPSetCommAsnnName DisplayString
  zxr10RMAPSetCommAsnnSequence Integer32
  zxr10RMAPSetCommAsnnIsAddtive RmapSetComm
  zxr10RMAPSetCommAsnn DisplayString
  zxr10RMAPSetCommAsnnRowStatus RowStatus

Zxr10RMAPSetCommunityUintEntry  
SEQUENCE    
  zxr10RMAPSetCommUintName DisplayString
  zxr10RMAPSetCommUintSequence Integer32
  zxr10RMAPSetCommUintIsAddtive RmapSetComm
  zxr10RMAPSetCommUint Unsigned32
  zxr10RMAPSetCommUintRowStatus RowStatus

Zxr10RMAPSetDampeningEntry  
SEQUENCE    
  zxr10RMAPSetDampeningName DisplayString
  zxr10RMAPSetDampeningSequence Integer32
  zxr10RMAPSetDampeningHalfLife Integer32
  zxr10RMAPSetDampeningReuse Integer32
  zxr10RMAPSetDampeningSuppress Integer32
  zxr10RMAPSetDampeningMaxSupTime Integer32
  zxr10RMAPSetDampeningRowStatus RowStatus

Zxr10RMAPSetDscpEntry  
SEQUENCE    
  zxr10RMAPSetDscpName DisplayString
  zxr10RMAPSetDscpSequence Integer32
  zxr10RMAPSetDscp Integer32
  zxr10RMAPSetDscpRowStatus RowStatus

Zxr10RMAPSetRtEntry  
SEQUENCE    
  zxr10RMAPSetRtName DisplayString
  zxr10RMAPSetRtSequence Integer32
  zxr10RMAPSetRtAsnn DisplayString
  zxr10RMAPSetRtReOrAdd RmapSetRt
  zxr10RMAPSetRtRowStatus RowStatus

Zxr10RMAPSetSooEntry  
SEQUENCE    
  zxr10RMAPSetSooName DisplayString
  zxr10RMAPSetSooSequence Integer32
  zxr10RMAPSetSooAsnn DisplayString
  zxr10RMAPSetSooRemove RmapSetRt
  zxr10RMAPSetSooRowStatus RowStatus

Zxr10RMAPSetGlobalEntry  
SEQUENCE    
  zxr10RMAPSetGlobalName DisplayString
  zxr10RMAPSetGlobalSequence Integer32
  zxr10RMAPSetGlobal TruthValue
  zxr10RMAPSetGlobalIPAddr IpAddress
  zxr10RMAPSetGlobalIpConst RmapSetGlobalIpConst
  zxr10RMAPSetGlobalNextHopConst RmapSetGlobalNextHopConst
  zxr10RMAPSetGlobalRowStatus RowStatus

Zxr10RMAPSetInterfaceEntry  
SEQUENCE    
  zxr10RMAPSetInterfaceName DisplayString
  zxr10RMAPSetInterfaceSequence Integer32
  zxr10RMAPSetInterface DisplayString
  zxr10RMAPSetInterfaceRowStatus RowStatus

Zxr10RMAPSetIpMetricEntry  
SEQUENCE    
  zxr10RMAPSetIpMetricName DisplayString
  zxr10RMAPSetIpMetricSequence Integer32
  zxr10RMAPSetIpMetricAct RmapSetMetricAct
  zxr10RMAPSetIpMetricValue Unsigned32
  zxr10RMAPSetIpMetricRowStatus RowStatus

Zxr10RMAPSetIpMetricTypeEntry  
SEQUENCE    
  zxr10RMAPSetIpMetricTypeName DisplayString
  zxr10RMAPSetIpMetricTypeSequence Integer32
  zxr10RMAPSetIpMetricType RmapSetMetricType
  zxr10RMAPSetIpMetricTypeRowStat RowStatus

Zxr10RMAPSetIpNextHopEntry  
SEQUENCE    
  zxr10RMAPSetIpNextHopName DisplayString
  zxr10RMAPSetIpNextHopSequence Integer32
  zxr10RMAPSetIpNextHop IpAddress
  zxr10RMAPSetIpNextHopSqa DisplayString
  zxr10RMAPSetIpNextHopRowStatus RowStatus

Zxr10RMAPSetIpPathEntry  
SEQUENCE    
  zxr10RMAPIpPathName DisplayString
  zxr10RMAPIpPathSequence Integer32
  zxr10RMAPSetIpPathIntf DisplayString
  zxr10RMAPSetIpPathNextHop IpAddress
  zxr10RMAPSetIpPathRowStatus RowStatus

Zxr10RMAPSetIpPrecEntry  
SEQUENCE    
  zxr10RMAPSetIpPrecName DisplayString
  zxr10RMAPSetIpPrecSequence Integer32
  zxr10RMAPSetIpPrec Integer32
  zxr10RMAPSetIpPrecMap RmapSetPrec
  zxr10RMAPSetIpPrecRowStatus RowStatus

Zxr10RMAPSetIpTagEntry  
SEQUENCE    
  zxr10RMAPSetIpTagName DisplayString
  zxr10RMAPSetIpTagSequence Integer32
  zxr10RMAPSetIpTag Unsigned32
  zxr10RMAPSetIpTagRowStatus RowStatus

Zxr10RMAPSetIpTosEntry  
SEQUENCE    
  zxr10RMAPSetIpTosName DisplayString
  zxr10RMAPSetIpTosSequence Integer32
  zxr10RMAPSetIpTos Integer32
  zxr10RMAPSetIpTosMap RmapSetTos
  zxr10RMAPSetIpTosRowStatus RowStatus

Zxr10RMAPSetIpv6MetricEntry  
SEQUENCE    
  zxr10RMAPSetIpv6MetricName DisplayString
  zxr10RMAPSetIpv6MetricSequence Integer32
  zxr10RMAPSetIpv6MetricAct RmapSetMetricAct
  zxr10RMAPSetIpv6MetricValue Unsigned32
  zxr10RMAPSetIpv6MetricRowStatus RowStatus

Zxr10RMAPSetIpv6MetricTypeEntry  
SEQUENCE    
  zxr10RMAPSetIpv6MetricTypeName DisplayString
  zxr10RMAPSetIpv6MetricTypeSeq Integer32
  zxr10RMAPSetIpv6MetricType RmapSetMetricType
  zxr10RMAPSetIpv6MetricTypeRowSta RowStatus

Zxr10RMAPSetIpv6NextHopEntry  
SEQUENCE    
  zxr10RMAPSetIpv6NextHopName DisplayString
  zxr10RMAPSetIpv6NextHopSequence Integer32
  zxr10RMAPSetIpv6NextHop Ipv6Address
  zxr10RMAPSetIpv6NextHopRowStatus RowStatus

Zxr10RMAPSetIpv6PathEntry  
SEQUENCE    
  zxr10RMAPSetIpv6PathName DisplayString
  zxr10RMAPSetIpv6PathSequence Integer32
  zxr10RMAPSetIpv6PathIntf DisplayString
  zxr10RMAPSetIpv6PathNextHop Ipv6Address
  zxr10RMAPSetIpv6PathRowStatus RowStatus

Zxr10RMAPSetIpv6PrecEntry  
SEQUENCE    
  zxr10RMAPSetIpv6precName DisplayString
  zxr10RMAPSetIpv6precSequence Integer32
  zxr10RMAPSetIpv6prec Integer32
  zxr10RMAPSetIpv6precMap RmapSetPrec
  zxr10RMAPSetIpv6precRowStatus RowStatus

Zxr10RMAPSetIpv6TagEntry  
SEQUENCE    
  zxr10RMAPSetIpv6TagName DisplayString
  zxr10RMAPSetIpv6TagSequence Integer32
  zxr10RMAPSetIpv6Tag Unsigned32
  zxr10RMAPSetIpv6TagRowStatus RowStatus

Zxr10RMAPSetIpv6TrafficEntry  
SEQUENCE    
  zxr10RMAPSetIpv6TrafficName DisplayString
  zxr10RMAPSetIpv6TrafficSequence Integer32
  zxr10RMAPSetIpv6Traffic Integer32
  zxr10RMAPSetIpv6TrafficRowStatus RowStatus

Zxr10RMAPSetLevelEntry  
SEQUENCE    
  zxr10RMAPSetLevelName DisplayString
  zxr10RMAPSetLevelSequence Integer32
  zxr10RMAPSetLevel RmapSetLevel
  zxr10RMAPSetLevelRowStatus RowStatus

Zxr10RMAPSetLocalPreEntry  
SEQUENCE    
  zxr10RMAPSetLocalPreName DisplayString
  zxr10RMAPSetLocalPreSequence Integer32
  zxr10RMAPSetLocalPre Unsigned32
  zxr10RMAPSetLocalPreRowStatus RowStatus

Zxr10RMAPSetMplsEntry  
SEQUENCE    
  zxr10RMAPSetMplsName DisplayString
  zxr10RMAPSetMplsSequence Integer32
  zxr10RMAPSetMpls TruthValue
  zxr10RMAPSetMplsRowStatus RowStatus

Zxr10RMAPSetNextHopEntry  
SEQUENCE    
  zxr10RMAPSetNextHopName DisplayString
  zxr10RMAPSetNextHopSequence Integer32
  zxr10RMAPSetNextHop IpAddress
  zxr10RMAPSetNextHopRowStatus RowStatus

Zxr10RMAPSetOriginEntry  
SEQUENCE    
  zxr10RMAPSetOriginName DisplayString
  zxr10RMAPSetOriginSequence Integer32
  zxr10RMAPSetOrigin RmapSetOrigin
  zxr10RMAPSetOriginRowStatus RowStatus

Zxr10RMAPSetQosIdEntry  
SEQUENCE    
  zxr10RMAPSetQosIdName DisplayString
  zxr10RMAPSetQosIdSequence Integer32
  zxr10RMAPSetQosId Integer32
  zxr10RMAPSetQosIdRowStatus RowStatus

Zxr10RMAPSetVrfEntry  
SEQUENCE    
  zxr10RMAPSetVrfName DisplayString
  zxr10RMAPSetVrfSequence Integer32
  zxr10RMAPSetVrf DisplayString
  zxr10RMAPSetVrfNextHop IpAddress
  zxr10RMAPSetVrfSqa DisplayString
  zxr10RMAPSetVrfIpConst RmapSetVrfIpConst
  zxr10RMAPSetVrfNextHopConst RmapSetVrfNextHopConst
  zxr10RMAPSetVrfRowStatus RowStatus

Zxr10RMAPMatchAsLenEntry  
SEQUENCE    
  zxr10RMAPMatchAsLenName DisplayString
  zxr10RMAPMatchAsLenSequence Integer32
  zxr10RMAPMatchAsLenAlg RmapMatchAlg
  zxr10RMAPMatchAsLen Integer32
  zxr10RMAPMatchAsLenRowStatus RowStatus

Zxr10RMAPMatchAsUnqLenEntry  
SEQUENCE    
  zxr10RMAPMatchAsUnqLenName DisplayString
  zxr10RMAPMatchAsUnqLenSequence Integer32
  zxr10RMAPMatchAsUnqLenAlg RmapMatchAlg
  zxr10RMAPMatchAsUnqLen Integer32
  zxr10RMAPMatchAsUnqLenRowStatus RowStatus

Zxr10RMAPMatchIpSourceAclEntry  
SEQUENCE    
  zxr10RMAPMatchSourceAclName DisplayString
  zxr10RMAPMatchSourceAclSequence Integer32
  zxr10RMAPSourceAclName DisplayString
  zxr10RMAPSourceIsConfigAcl TruthValue
  zxr10RMAPMatchSourceAclRowStatus RowStatus

Zxr10RMAPMatchIpSourcePflEntry  
SEQUENCE    
  zxr10RMAPMatchSourcePflName DisplayString
  zxr10RMAPMatchSourcePflSequence Integer32
  zxr10RMAPSourcePflName DisplayString
  zxr10RMAPSourceIsConfigPfl TruthValue
  zxr10RMAPMatchSourcePflRowStatus RowStatus

Zxr10RMAPMatchLocalPrefEntry  
SEQUENCE    
  zxr10RMAPMatchLocalPrefName DisplayString
  zxr10RMAPMatchLocalPrefSequence Integer32
  zxr10RMAPMatchLocalPrefAlg RmapMatchAlg
  zxr10RMAPMatchLocalPref Unsigned32
  zxr10RMAPMatchLocalPrefRowStatus RowStatus

Zxr10RMAPMatchOriginEntry  
SEQUENCE    
  zxr10RMAPMatchOriginName DisplayString
  zxr10RMAPMatchOriginSequence Integer32
  zxr10RMAPMatchOrigin RmapSetOrigin
  zxr10RMAPMatchOriginRowStatus RowStatus

Zxr10RMAPSetPathSelEntry  
SEQUENCE    
  zxr10RMAPSetPathSelName DisplayString
  zxr10RMAPSetPathSelSequence Integer32
  zxr10RMAPSetPathSelPath RmapSetPath
  zxr10RMAPSetPathSelNum Integer32
  zxr10RMAPSetPathSelInstall RmapSetPathInstall
  zxr10RMAPSetPathSelMulpro RmapSetPathMulpro
  zxr10RMAPSetPathSelAdvertise RmapSetPathAdvertise
  zxr10RMAPSetPathSelRowStatus RowStatus

Zxr10RMAPSetPolicyPrioEntry  
SEQUENCE    
  zxr10RMAPSetPolicyPrioName DisplayString
  zxr10RMAPSetPolicyPrioSequence Integer32
  zxr10RMAPSetPolicyPrio Integer32
  zxr10RMAPSetPolicyPrioRowStatus RowStatus

Zxr10RMAPMatchIpAlgMetricEntry  
SEQUENCE    
  zxr10RMAPMatchIpAlgMetricName DisplayString
  zxr10RMAPMatchIpAlgMetricSeq Integer32
  zxr10RMAPMatchIpAlgMetricAlg RmapMatchAlg
  zxr10RMAPMatchIpAlgMetric Unsigned32
  zxr10RMAPIpAlgMetricRowStatus RowStatus

Zxr10RMAPMatchIpv6AlgMetricEntry  
SEQUENCE    
  zxr10RMAPMatchIpv6AlgMetricName DisplayString
  zxr10RMAPMatchIpv6AlgMetricSeq Integer32
  zxr10RMAPMatchIpv6AlgMetricAlg RmapMatchAlg
  zxr10RMAPMatchIpv6AlgMetric Unsigned32
  zxr10RMAPIpv6AlgMetricRowStatus RowStatus

Zxr10RMAPSetTraffIdxEntry  
SEQUENCE    
  zxr10RMAPSetTraffIdxName DisplayString
  zxr10RMAPSetTraffIdxSequence Integer32
  zxr10RMAPSetTraffIdx Integer32
  zxr10RMAPSetTraffIdxRowStatus RowStatus

Zxr10RMAPSetNextHopPeerAddrEntry  
SEQUENCE    
  zxr10RMAPSetNextHopPeerAddrName DisplayString
  zxr10RMAPSetNextHopPeerAddrSeq Integer32
  zxr10RMAPSetNextHopAddr IpAddress
  zxr10RMAPSetNextHopPeerAddr Integer32
  zxr10RMAPSetNHorPeerAddRowStatus RowStatus

Zxr10RMAPSetIpv6NHorPeerAddEntry  
SEQUENCE    
  zxr10RMAPSetIpv6NHorPeerAddName DisplayString
  zxr10RMAPSetIpv6NHorPeerAddSeq Integer32
  zxr10RMAPSetIpv6NextHopAddr Ipv6Address
  zxr10RMAPSetIpv6NextHopPeerAddr Integer32
  zxr10RMAPSetv6NHorPeerRowStatus RowStatus

Zxr10RMAPMatchEvpnEntry  
SEQUENCE    
  zxr10RMAPMatchEvpnName DisplayString
  zxr10RMAPMatchEvpnSequence Integer32
  zxr10RMAPMatchEvpn Integer32
  zxr10RMAPMatchEvpnRowStatus RowStatus

Zxr10RMAPBlackHoleRouteEntry  
SEQUENCE    
  zxr10RMAPBlackHoleRouteName DisplayString
  zxr10RMAPBlackHoleRouteSequence Integer32
  zxr10RMAPBlackHoleRouteEnable INTEGER
  zxr10RMAPBlackHoleRouteRowStatus RowStatus

Zxr10RMAPDefaultRouteEntry  
SEQUENCE    
  zxr10RMAPDefaultRouteName DisplayString
  zxr10RMAPDefaultRouteSequence Integer32
  zxr10RMAPDefaultRouteEnable INTEGER
  zxr10RMAPDefaultRouteRowStatus RowStatus

Zxr10RMAPStrictPolicyEntry  
SEQUENCE    
  zxr10RMAPStrictPolicyName DisplayString
  zxr10RMAPStrictPolicySequence Integer32
  zxr10RMAPStrictPolicyEnable INTEGER
  zxr10RMAPStrictPolicyRowStatus RowStatus

Zxr10RMAPSetPathListEntry  
SEQUENCE    
  zxr10RMAPSetPathListName DisplayString
  zxr10RMAPSetPathListSequence Integer32
  zxr10RMAPSetPathListIntf DisplayString
  zxr10RMAPSetPathListNextHop IpAddress
  zxr10RMAPSetPathListRowStatus RowStatus

Zxr10RMAPSetPathList6Entry  
SEQUENCE    
  zxr10RMAPSetPathList6Name DisplayString
  zxr10RMAPSetPathList6Sequence Integer32
  zxr10RMAPSetPathList6Intf DisplayString
  zxr10RMAPSetPathList6NextHop Ipv6Address
  zxr10RMAPSetPathList6RowStatus RowStatus

Zxr10RMAPSetVxlanTunnelSrcEntry  
SEQUENCE    
  zxr10RMAPSetVxlanTunnelSrcName DisplayString
  zxr10RMAPSetVxlanTunnelSrcSeq Integer32
  zxr10RMAPSetVxlanTunnelSrcAddr IpAddress
  zxr10RMAPVxlanTunnelSrcRowStatus RowStatus

Zxr10RMAPSetEvpnMacIntfEntry  
SEQUENCE    
  zxr10RMAPSetEvpnMacIntfName DisplayString
  zxr10RMAPSetEvpnMacIntfSequence Integer32
  zxr10RMAPSetEvpnMacIntf DisplayString
  zxr10RMAPSetEvpnMacIntfRowStatus RowStatus

Zxr10RMAPSetL2vniLabelEntry  
SEQUENCE    
  zxr10RMAPSetL2vniLabelName DisplayString
  zxr10RMAPSetL2vniLabelSequence Integer32
  zxr10RMAPSetL2vniLabel Integer32
  zxr10RMAPSetL2vniLabelRowStatus RowStatus

Zxr10RMAPSetL3vniLabelEntry  
SEQUENCE    
  zxr10RMAPSetL3vniLabelName DisplayString
  zxr10RMAPSetL3vniLabelSequence Integer32
  zxr10RMAPSetL3vniLabel Integer32
  zxr10RMAPSetL3vniLabelRowStatus RowStatus

Zxr10RMAPMatchL3VniLabelEntry  
SEQUENCE    
  zxr10RMAPMatchL3VniLabelName DisplayString
  zxr10RMAPMatchL3VniLabelSequence Integer32
  zxr10RMAPMatchL3VniLabel Integer32
  zxr10RMAPMatchL3VniLabelStatus RowStatus

Zxr10RMAPMatchL2VniLabelEntry  
SEQUENCE    
  zxr10RMAPMatchL2VniLabelName DisplayString
  zxr10RMAPMatchL2VniLabelSequence Integer32
  zxr10RMAPMatchL2VniLabel Integer32
  zxr10RMAPMatchL2VniLabelStatus RowStatus

Zxr10RMAPMatchPlyRtIdEntry  
SEQUENCE    
  zxr10RMAPMatchPlyRtIdName DisplayString
  zxr10RMAPMatchPlyRtIdSequence Integer32
  zxr10RMAPMatchPlyRtId Integer32
  zxr10RMAPMatchPlyRtIdDeriction INTEGER
  zxr10RMAPMatchPlyRtIdStatus RowStatus

Zxr10RMAPMatchIpv6PlyRtIdEntry  
SEQUENCE    
  zxr10RMAPMatchIpv6PlyRtIdName DisplayString
  zxr10RMAPMatchIpv6PlyRtIdSeq Integer32
  zxr10RMAPMatchIpv6PlyRtId Integer32
  zxr10RMAPMatchIpv6PlyRtIdDerict INTEGER
  zxr10RMAPMatchIpv6PlyRtIdStatus RowStatus

Zxr10RMAPSetPlyRtIdEntry  
SEQUENCE    
  zxr10RMAPSetPlyRtIdName DisplayString
  zxr10RMAPSetPlyRtIdSequence Integer32
  zxr10RMAPSetPlyRtId Integer32
  zxr10RMAPSetPlyRtIdStatus RowStatus

Zxr10RMAPSetMonitorGroupIdEntry  
SEQUENCE    
  zxr10RMAPSetMonitorGroupIdName DisplayString
  zxr10RMAPSetMonitorGroupIdSeq Integer32
  zxr10RMAPSetMonitorGroupId Integer32
  zxr10RMAPSetMonitorGroupIdStatus RowStatus

Zxr10RMAPLoadShareEntry  
SEQUENCE    
  zxr10RMAPLoadShareName DisplayString
  zxr10RMAPLoadShareSequence Integer32
  zxr10RMAPLoadShareEnable Integer32
  zxr10RMAPLoadShareStatus RowStatus

Zxr10RMAPContinueEntry  
SEQUENCE    
  zxr10RMAPContinueName DisplayString
  zxr10RMAPContinueSequence Integer32
  zxr10RMAPContinue Integer32
  zxr10RMAPContinueNext Integer32
  zxr10RMAPContinueStatus RowStatus

Zxr10RMAPTimeRangeEntry  
SEQUENCE    
  zxr10RMAPTimeRangeName DisplayString
  zxr10RMAPTimeRangeSequence Integer32
  zxr10RMAPTimeRange DisplayString
  zxr10RMAPTimeRangeStatus RowStatus

Zxr10RMAPSetCommunityNameEntry  
SEQUENCE    
  zxr10RMAPSetCommunityName DisplayString
  zxr10RMAPSetCommunitySequence Integer32
  zxr10RMAPSetCommunityIsAddtive RmapSetComm
  zxr10RMAPSetCommunityListName DisplayString
  zxr10RMAPSetCommunityRowStatus RowStatus

Defined Values

zxr10RMAPMIB 4.4.1.3902.3.6000.604
The MIB module to describe the RMAP protocol.
MODULE-IDENTITY    

zxr10RMAPGlobalObjects 4.4.1.3902.3.6000.604.1
OBJECT IDENTIFIER    

zxr10RMAPObjects 4.4.1.3902.3.6000.604.2
OBJECT IDENTIFIER    

zxr10RMAPNotifications 4.4.1.3902.3.6000.604.3
OBJECT IDENTIFIER    

zxr10RMAPConformance 4.4.1.3902.3.6000.604.4
OBJECT IDENTIFIER    

zxr10RMAPRuleObjects 4.4.1.3902.3.6000.604.2.1
OBJECT IDENTIFIER    

zxr10RMAPNameTable 4.4.1.3902.3.6000.604.2.1.1
Route-map Name Table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Zxr10RMAPNameEntry

zxr10RMAPNameEntry 4.4.1.3902.3.6000.604.2.1.1.1
Route-map Name
Status: current Access: not-accessible
OBJECT-TYPE    
  Zxr10RMAPNameEntry  

zxr10RMAPName 4.4.1.3902.3.6000.604.2.1.1.1.1
Name of Route-map (1-31 characters)
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(1..31)  

zxr10RMAPSequence 4.4.1.3902.3.6000.604.2.1.1.1.2
The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

zxr10RMAPAction 4.4.1.3902.3.6000.604.2.1.1.1.3
permit:Match success deny :Match failed
Status: current Access: read-create
OBJECT-TYPE    
  RmapPermitDeny  

zxr10RMAPRowStatus 4.4.1.3902.3.6000.604.2.1.1.1.100
RowStatus
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

zxr10RMAPMatchAspathTable 4.4.1.3902.3.6000.604.2.1.2
Route-map Match Aspath Table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Zxr10RMAPMatchAspathEntry

zxr10RMAPMatchAspathEntry 4.4.1.3902.3.6000.604.2.1.2.1
Match BGP as-path list
Status: current Access: not-accessible
OBJECT-TYPE    
  Zxr10RMAPMatchAspathEntry  

zxr10RMAPAspathName 4.4.1.3902.3.6000.604.2.1.2.1.1
Name of Route-map (1-31 characters)
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(1..31)  

zxr10RMAPAspathSequence 4.4.1.3902.3.6000.604.2.1.2.1.2
The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

zxr10RMAPAspathNo 4.4.1.3902.3.6000.604.2.1.2.1.3
Aspath List Number. The range of config is 0 to 199. Each sequence has 10 match aspath items at most
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

zxr10RMAPAspathMatchName 4.4.1.3902.3.6000.604.2.1.2.1.4
Name of Aspath (0-31 characters)
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(0..31)  

zxr10RMAPAspathRowStatus 4.4.1.3902.3.6000.604.2.1.2.1.100
RowStatus
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

zxr10RMAPMatchCommunityTable 4.4.1.3902.3.6000.604.2.1.3
Route-map Match Community Table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Zxr10RMAPMatchCommunityEntry

zxr10RMAPMatchCommunityEntry 4.4.1.3902.3.6000.604.2.1.3.1
Match BGP community list
Status: current Access: not-accessible
OBJECT-TYPE    
  Zxr10RMAPMatchCommunityEntry  

zxr10RMAPCommunityName 4.4.1.3902.3.6000.604.2.1.3.1.1
Name of Route-map (1-31 characters)
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(1..31)  

zxr10RMAPCommunitySequence 4.4.1.3902.3.6000.604.2.1.3.1.2
The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

zxr10RMAPCommunityNo 4.4.1.3902.3.6000.604.2.1.3.1.3
Community list number. The range of config is 0 to 499. Each sequence has 10 match community items at most.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

zxr10RMAPCommunityMatchName 4.4.1.3902.3.6000.604.2.1.3.1.4
Name of Community (0-31 characters)
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(0..31)  

zxr10RMAPCommunityRowStatus 4.4.1.3902.3.6000.604.2.1.3.1.100
RowStatus
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

zxr10RMAPMatchExtCommunityTable 4.4.1.3902.3.6000.604.2.1.4
Route-map Match ExtCommunity Table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Zxr10RMAPMatchExtCommunityEntry

zxr10RMAPMatchExtCommunityEntry 4.4.1.3902.3.6000.604.2.1.4.1
Match BGP extcommunity list
Status: current Access: not-accessible
OBJECT-TYPE    
  Zxr10RMAPMatchExtCommunityEntry  

zxr10RMAPExtCommunityName 4.4.1.3902.3.6000.604.2.1.4.1.1
Name of Route-map (1-31 characters)
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(1..31)  

zxr10RMAPExtCommunitySequence 4.4.1.3902.3.6000.604.2.1.4.1.2
The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

zxr10RMAPExtCommunityNo 4.4.1.3902.3.6000.604.2.1.4.1.3
ExtCommunity list number. The range of config is 0 to 500. Each sequence has 10 match extcommunity items at most.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

zxr10RMAPExtCommunityMatchName 4.4.1.3902.3.6000.604.2.1.4.1.4
Name of ExtCommunity (0-31 characters)
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(0..31)  

zxr10RMAPExtCommunityRowStatus 4.4.1.3902.3.6000.604.2.1.4.1.100
RowStatus
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

zxr10RMAPMatchInterfaceTable 4.4.1.3902.3.6000.604.2.1.5
Route-map Match Interface Table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Zxr10RMAPMatchInterfaceEntry

zxr10RMAPMatchInterfaceEntry 4.4.1.3902.3.6000.604.2.1.5.1
Match first hop interface of route
Status: current Access: not-accessible
OBJECT-TYPE    
  Zxr10RMAPMatchInterfaceEntry  

zxr10RMAPInterfaceName 4.4.1.3902.3.6000.604.2.1.5.1.1
Name of Route-map (1-31 characters)
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(1..31)  

zxr10RMAPInterfaceSequence 4.4.1.3902.3.6000.604.2.1.5.1.2
The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

zxr10RMAPInterface 4.4.1.3902.3.6000.604.2.1.5.1.3
Interface Name(1-31 characters). Each sequence has 10 match interface items at most. This match item supports these types of interface: [PORT-CLASS-FEI, PORT-CLASS-GEI-END] [PORT-CLASS-OC, PORT-TYPE-OC48] [PORT-TYPE-OC192, PORT-CLASS-E1-END] [PORT-CLASS-E1-C-CH, PORT-TYPE-ULEI] [PORT-CLASS-GVI, PORT-CLASS-GVI-END] [PORT-CLASS-QX, PORT-CLASS-QX-END] [PORT-TYPE-MANAGE, PORT-TYPE-MANAGE] [PORT-CLASS-DSL, PORT-CLASS-DSL-END] [PORT-CLASS-SPECIAL, PORT-TYPE-SUPERQINQ] [PORT-TYPE-TE-TUNNEL, PORT-TYPE-IPSEC-TUNNEL] [PORT-TYPE-CIP, PORT-TYPE-QX-LOGIC].
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(1..31)  

zxr10RMAPInterfaceRowStatus 4.4.1.3902.3.6000.604.2.1.5.1.100
RowStatus
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

zxr10RMAPMatchIpAddressAclTable 4.4.1.3902.3.6000.604.2.1.6
Route-map Match IpAddress Table(match ip address by acl).
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Zxr10RMAPMatchIpAddressAclEntry

zxr10RMAPMatchIpAddressAclEntry 4.4.1.3902.3.6000.604.2.1.6.1
Match address of route or match packet. This match item sets the route-map name with ipv4 type. It conflicts with other match or set items which set the route-map name with ipv6 type. Otherwise, It conflicts with the item that match ip address by pfl. If zxr10RMAPIsConfigAcl is true,it expresses that this config is match ip address by acl.
Status: current Access: not-accessible
OBJECT-TYPE    
  Zxr10RMAPMatchIpAddressAclEntry  

zxr10RMAPMatchAclName 4.4.1.3902.3.6000.604.2.1.6.1.1
Name of Route-map (1-31 characters)
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(1..31)  

zxr10RMAPMatchAclSequence 4.4.1.3902.3.6000.604.2.1.6.1.2
The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

zxr10RMAPAclName 4.4.1.3902.3.6000.604.2.1.6.1.3
Name of an access-list(1-31 characters). Each sequence has 10 match ip address items at most.
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(1..31)  

zxr10RMAPIsConfigAcl 4.4.1.3902.3.6000.604.2.1.6.1.4
It expresses that this config is match ip address by acl.
Status: current Access: not-accessible
OBJECT-TYPE    
  TruthValue  

zxr10RMAPMatchAclRowStatus 4.4.1.3902.3.6000.604.2.1.6.1.100
RowStatus
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

zxr10RMAPMatchIpAddressPflTable 4.4.1.3902.3.6000.604.2.1.7
Route-map Match IpAddress Table(match ip address by pfl)
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Zxr10RMAPMatchIpAddressPflEntry

zxr10RMAPMatchIpAddressPflEntry 4.4.1.3902.3.6000.604.2.1.7.1
Match address of route or match packet. This match item sets the route-map name with ipv4 type. It conflicts with other match or set items which set the route-map name with ipv6 type. Otherwise, It conflicts with the item that match ip address by acl.
Status: current Access: not-accessible
OBJECT-TYPE    
  Zxr10RMAPMatchIpAddressPflEntry  

zxr10RMAPMatchPflName 4.4.1.3902.3.6000.604.2.1.7.1.1
Name of Route-map (1-31 characters)
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(1..31)  

zxr10RMAPMatchPflSequence 4.4.1.3902.3.6000.604.2.1.7.1.2
The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

zxr10RMAPPflName 4.4.1.3902.3.6000.604.2.1.7.1.3
Name of a prefix list (1-31 characters). Each sequence has 10 match ip address items at most.
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(1..31)  

zxr10RMAPIsConfigPfl 4.4.1.3902.3.6000.604.2.1.7.1.4
It expresses that this config is match ip address by pfl.
Status: current Access: not-accessible
OBJECT-TYPE    
  TruthValue  

zxr10RMAPMatchPflRowStatus 4.4.1.3902.3.6000.604.2.1.7.1.100
RowStatus
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

zxr10RMAPMatchIpMetricTable 4.4.1.3902.3.6000.604.2.1.8
Route-map Match IpMetric Table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Zxr10RMAPMatchIpMetricEntry

zxr10RMAPMatchIpMetricEntry 4.4.1.3902.3.6000.604.2.1.8.1
Match metric of route. This match item sets the route-map name with ipv4 type. It conflicts with other match or set items which set the route-map name with ipv6 type.
Status: current Access: not-accessible
OBJECT-TYPE    
  Zxr10RMAPMatchIpMetricEntry  

zxr10RMAPIpMetricName 4.4.1.3902.3.6000.604.2.1.8.1.1
Name of Route-map (1-31 characters)
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(1..31)  

zxr10RMAPIpMetricSequence 4.4.1.3902.3.6000.604.2.1.8.1.2
The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

zxr10RMAPIpMetric 4.4.1.3902.3.6000.604.2.1.8.1.3
Metric Value. The range of config is 0 to 4294967295. Each sequence has 10 match ip metric items at most.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

zxr10RMAPIpMetricRowStatus 4.4.1.3902.3.6000.604.2.1.8.1.100
RowStatus
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

zxr10RMAPMatchIpNextHopTable 4.4.1.3902.3.6000.604.2.1.9
Route-map Match IpNextHop Table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Zxr10RMAPMatchIpNextHopEntry

zxr10RMAPMatchIpNextHopEntry 4.4.1.3902.3.6000.604.2.1.9.1
Match next-hop address of route. This match item sets the route-map name with ipv4 type. It conflicts with other match or set items which set the route-map name with ipv6 type.
Status: current Access: not-accessible
OBJECT-TYPE    
  Zxr10RMAPMatchIpNextHopEntry  

zxr10RMAPIpNextHopName 4.4.1.3902.3.6000.604.2.1.9.1.1
Name of Route-map (1-31 characters)
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(1..31)  

zxr10RMAPIpNextHopSequence 4.4.1.3902.3.6000.604.2.1.9.1.2
The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

zxr10RMAPIpNextHop 4.4.1.3902.3.6000.604.2.1.9.1.3
Name of an access-list(1-31 characters). Each sequence has 10 match ip next-hop items at most.
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(1..31)  

zxr10RMAPIpNextHopRowStatus 4.4.1.3902.3.6000.604.2.1.9.1.100
RowStatus
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

zxr10RMAPMatchIpTagTable 4.4.1.3902.3.6000.604.2.1.10
Route-map Match IpTag Table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Zxr10RMAPMatchIpTagEntry

zxr10RMAPMatchIpTagEntry 4.4.1.3902.3.6000.604.2.1.10.1
Match tag of route. This match item sets the route-map name with ipv4 type. It conflicts with other match or set items which set the route-map name with ipv6 type.
Status: current Access: not-accessible
OBJECT-TYPE    
  Zxr10RMAPMatchIpTagEntry  

zxr10RMAPIpTagName 4.4.1.3902.3.6000.604.2.1.10.1.1
Name of Route-map (1-31 characters)
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(1..31)  

zxr10RMAPIpTagSequence 4.4.1.3902.3.6000.604.2.1.10.1.2
The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

zxr10RMAPIpTag 4.4.1.3902.3.6000.604.2.1.10.1.3
Tag Value. The range of config is 0 to 4294967295. Each sequence has 10 match ip tag items at most.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

zxr10RMAPIpTagRowStatus 4.4.1.3902.3.6000.604.2.1.10.1.100
RowStatus
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

zxr10RMAPMatchIpv6AddressTable 4.4.1.3902.3.6000.604.2.1.11
Route-map Match Ipv6Address Table
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Zxr10RMAPMatchIpv6AddressEntry

zxr10RMAPMatchIpv6AddressEntry 4.4.1.3902.3.6000.604.2.1.11.1
Match address of route or match packet. This match item sets the route-map name with ipv6 type. It conflicts with other match or set items which set the route-map name with ipv4 type.
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  Zxr10RMAPMatchIpv6AddressEntry  

zxr10RMAPIpv6AddressName 4.4.1.3902.3.6000.604.2.1.11.1.1
Name of Route-map (1-31 characters)
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(1..31)  

zxr10RMAPIpv6AddressSequence 4.4.1.3902.3.6000.604.2.1.11.1.2
The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  Integer32  

zxr10RMAPIpv6Address 4.4.1.3902.3.6000.604.2.1.11.1.3
Name of an access-list(1-31 characters). Each sequence has 10 match ipv6 address items at most.
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(1..31)  

zxr10RMAPIpv6AddressRowStatus 4.4.1.3902.3.6000.604.2.1.11.1.100
RowStatus
Status: obsolete Access: read-create
OBJECT-TYPE    
  RowStatus  

zxr10RMAPMatchIpv6AddrPflTable 4.4.1.3902.3.6000.604.2.1.59
Route-map Match Ipv6Address pfl Table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Zxr10RMAPMatchIpv6AddrPflEntry

zxr10RMAPMatchIpv6AddrPflEntry 4.4.1.3902.3.6000.604.2.1.59.1
Match address of route or match packet. This match item sets the route-map name with ipv6 type. It conflicts with other match or set items which set the route-map name with ipv4 type.
Status: current Access: not-accessible
OBJECT-TYPE    
  Zxr10RMAPMatchIpv6AddrPflEntry  

zxr10RMAPIpv6AddrPflName 4.4.1.3902.3.6000.604.2.1.59.1.1
Name of Route-map (1-31 characters)
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(1..31)  

zxr10RMAPIpv6AddrPflSequence 4.4.1.3902.3.6000.604.2.1.59.1.2
The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

zxr10RMAPIpv6AddrPfl 4.4.1.3902.3.6000.604.2.1.59.1.3
Name of an access-list(1-31 characters). Each sequence has 10 match ipv6 address items at most.
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(1..31)  

zxr10RMAPIpv6IsConfigPfl 4.4.1.3902.3.6000.604.2.1.59.1.4
It expresses that this config is match ipv6 address by pfl.
Status: current Access: not-accessible
OBJECT-TYPE    
  TruthValue  

zxr10RMAPIpv6AddrPflRowStatus 4.4.1.3902.3.6000.604.2.1.59.1.100
RowStatus
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

zxr10RMAPMatchIpv6MetricTable 4.4.1.3902.3.6000.604.2.1.12
Route-map Match Ipv6Metric Table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Zxr10RMAPMatchIpv6MetricEntry

zxr10RMAPMatchIpv6MetricEntry 4.4.1.3902.3.6000.604.2.1.12.1
Match metric of route. This match item sets the route-map name with ipv6 type. It conflicts with other match or set items which set the route-map name with ipv4 type.
Status: current Access: not-accessible
OBJECT-TYPE    
  Zxr10RMAPMatchIpv6MetricEntry  

zxr10RMAPIpv6MetricName 4.4.1.3902.3.6000.604.2.1.12.1.1
Name of Route-map (1-31 characters)
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(1..31)  

zxr10RMAPIpv6MetricSequence 4.4.1.3902.3.6000.604.2.1.12.1.2
The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

zxr10RMAPIpv6Metric 4.4.1.3902.3.6000.604.2.1.12.1.3
Metric Value. The range of config is 0 to 4294967295. Each sequence has 10 match ipv6 metric items at most.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

zxr10RMAPIpv6MetricRowStatus 4.4.1.3902.3.6000.604.2.1.12.1.100
RowStatus
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

zxr10RMAPMatchIpv6NextHopTable 4.4.1.3902.3.6000.604.2.1.13
Route-map Match Ipv6NextHop Table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Zxr10RMAPMatchIpv6NextHopEntry

zxr10RMAPMatchIpv6NextHopEntry 4.4.1.3902.3.6000.604.2.1.13.1
Match next-hop address of route. This match item sets the route-map name with ipv6 type. It conflicts with other match or set items which set the route-map name with ipv4 type.
Status: current Access: not-accessible
OBJECT-TYPE    
  Zxr10RMAPMatchIpv6NextHopEntry  

zxr10RMAPIpv6NextHopName 4.4.1.3902.3.6000.604.2.1.13.1.1
Name of Route-map (1-31 characters)
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(1..31)  

zxr10RMAPIpv6NextHopSequence 4.4.1.3902.3.6000.604.2.1.13.1.2
The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

zxr10RMAPIpv6NextHop 4.4.1.3902.3.6000.604.2.1.13.1.3
Name of an access-list(1-31 characters). Each sequence has 10 match ipv6 next-hop items at most.
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(1..31)  

zxr10RMAPIpv6NextHopRowStatus 4.4.1.3902.3.6000.604.2.1.13.1.100
RowStatus
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

zxr10RMAPMatchIpv6TagTable 4.4.1.3902.3.6000.604.2.1.14
Route-map Match Ipv6Tag Table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Zxr10RMAPMatchIpv6TagEntry

zxr10RMAPMatchIpv6TagEntry 4.4.1.3902.3.6000.604.2.1.14.1
Match tag of route. This match item sets the route-map name with ipv6 type. It conflicts with other match or set items which set the route-map name with ipv4 type.
Status: current Access: not-accessible
OBJECT-TYPE    
  Zxr10RMAPMatchIpv6TagEntry  

zxr10RMAPIpv6TagName 4.4.1.3902.3.6000.604.2.1.14.1.1
Name of Route-map (1-31 characters)
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(1..31)  

zxr10RMAPIpv6TagSequence 4.4.1.3902.3.6000.604.2.1.14.1.2
The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

zxr10RMAPIpv6Tag 4.4.1.3902.3.6000.604.2.1.14.1.3
Tag Value. The range of config is 0 to 4294967295. Each sequence has 10 match ipv6 tag items at most.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

zxr10RMAPIpv6TagRowStatus 4.4.1.3902.3.6000.604.2.1.14.1.100
RowStatus
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

zxr10RMAPMatchRdTable 4.4.1.3902.3.6000.604.2.1.15
Route-map Match Rd Table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Zxr10RMAPMatchRdEntry

zxr10RMAPMatchRdEntry 4.4.1.3902.3.6000.604.2.1.15.1
Match BGP/VPN rd list
Status: current Access: not-accessible
OBJECT-TYPE    
  Zxr10RMAPMatchRdEntry  

zxr10RMAPMatchRdName 4.4.1.3902.3.6000.604.2.1.15.1.1
Name of Route-map (1-31 characters)
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(1..31)  

zxr10RMAPMatchRdSequence 4.4.1.3902.3.6000.604.2.1.15.1.2
The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

zxr10RMAPMatchRd 4.4.1.3902.3.6000.604.2.1.15.1.3
Rd-list number. The range of config is 1 to 500. 0 is invalid value. Each sequence has 10 match rd-list items at most.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

zxr10RMAPMatchRdRowStatus 4.4.1.3902.3.6000.604.2.1.15.1.100
RowStatus
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

zxr10RMAPMatchRouteTypeTable 4.4.1.3902.3.6000.604.2.1.16
Route-map Match RouteType Table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Zxr10RMAPMatchRouteTypeEntry

zxr10RMAPMatchRouteTypeEntry 4.4.1.3902.3.6000.604.2.1.16.1
Match route-type of route
Status: current Access: not-accessible
OBJECT-TYPE    
  Zxr10RMAPMatchRouteTypeEntry  

zxr10RMAPMatchRouteTypeName 4.4.1.3902.3.6000.604.2.1.16.1.1
Name of Route-map (1-31 characters)
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(1..31)  

zxr10RMAPMatchRouteTypeSequence 4.4.1.3902.3.6000.604.2.1.16.1.2
The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

zxr10RMAPMatchRouteType 4.4.1.3902.3.6000.604.2.1.16.1.3
local Locally generated route.Value is 1. internal Internal route (including OSPF intra/inter area).Value is 2. level-1 IS-IS level-1 route.Value is 3. level-2 IS-IS level-2 route.Value is 4. external External route (OSPF type 1/2).Value is 5. ebgp External border gateway protocol(EBGP) route.Value is 8. ibgp Internal border gateway protocol(IBGP) route.Value is 9. static Static route.Value is 10. bgp-agg BGP aggregate route.Value is 11.
Status: current Access: not-accessible
OBJECT-TYPE    
  RmapMatchRouteType  

zxr10RMAPMatchExternType 4.4.1.3902.3.6000.604.2.1.16.1.4
type-1 OSPF external type 1 route.Value is 6. type-2 OSPF external type 2 route.Value is 7.
Status: current Access: not-accessible
OBJECT-TYPE    
  RmapMatchRouteType  

zxr10RMAPMatchRouteTypeRowStatus 4.4.1.3902.3.6000.604.2.1.16.1.100
RowStatus
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

zxr10RMAPSetAspathTable 4.4.1.3902.3.6000.604.2.1.17
Route-map Set Aspath Table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Zxr10RMAPSetAspathEntry

zxr10RMAPSetAspathEntry 4.4.1.3902.3.6000.604.2.1.17.1
Set prepend string for a BGP as-path attribute. 0 is invalid value.
Status: current Access: not-accessible
OBJECT-TYPE    
  Zxr10RMAPSetAspathEntry  

zxr10RMAPSetAspathName 4.4.1.3902.3.6000.604.2.1.17.1.1
Name of Route-map (1-31 characters)
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(1..31)  

zxr10RMAPSetAspathSequence 4.4.1.3902.3.6000.604.2.1.17.1.2
The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

zxr10RMAPSetAspathAsnd1 4.4.1.3902.3.6000.604.2.1.17.1.3
AS number. The range of config is 1 to 4294967295.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

zxr10RMAPSetAspathAsnd2 4.4.1.3902.3.6000.604.2.1.17.1.4
AS number. The range of config is 1 to 4294967295.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

zxr10RMAPSetAspathAsnd3 4.4.1.3902.3.6000.604.2.1.17.1.5
AS number. The range of config is 1 to 4294967295.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

zxr10RMAPSetAspathAsnd4 4.4.1.3902.3.6000.604.2.1.17.1.6
AS number. The range of config is 1 to 4294967295.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

zxr10RMAPSetAspathAsnd5 4.4.1.3902.3.6000.604.2.1.17.1.7
AS number. The range of config is 1 to 4294967295.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

zxr10RMAPSetAspathAsnd6 4.4.1.3902.3.6000.604.2.1.17.1.8
AS number. The range of config is 1 to 4294967295.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

zxr10RMAPSetAspathAsnd7 4.4.1.3902.3.6000.604.2.1.17.1.9
AS number. The range of config is 1 to 4294967295.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

zxr10RMAPSetAspathAsnd8 4.4.1.3902.3.6000.604.2.1.17.1.10
AS number. The range of config is 1 to 4294967295.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

zxr10RMAPSetAspathAsnd9 4.4.1.3902.3.6000.604.2.1.17.1.11
AS number. The range of config is 1 to 4294967295.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

zxr10RMAPSetAspathAsnd10 4.4.1.3902.3.6000.604.2.1.17.1.12
AS number. The range of config is 1 to 4294967295.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

zxr10RMAPSetAspathPrepOrRep 4.4.1.3902.3.6000.604.2.1.17.1.13
Set aspath prepend or replace,prepend is 1,replace is 2
Status: current Access: read-create
OBJECT-TYPE    
  RmapPrependReplace  

zxr10RMAPSetAspathRowStatus 4.4.1.3902.3.6000.604.2.1.17.1.100
RowStatus
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

zxr10RMAPSetCommunityConstTable 4.4.1.3902.3.6000.604.2.1.18
Route-map Set Community Table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Zxr10RMAPSetCommunityConstEntry

zxr10RMAPSetCommunityConstEntry 4.4.1.3902.3.6000.604.2.1.18.1
Set BGP community attribute. The value of config includes: internet Internet(Well known community) no-advertise Do not advertise to any peer no-export Do not export to next AS no-export-subconfed Do not send outside local AS none No community attribute. If set community none has been setted, other types of set community can't be setted. If set community has been setted with attribute addtive, other configs of set community can't be setted without attribute addtive.
Status: current Access: not-accessible
OBJECT-TYPE    
  Zxr10RMAPSetCommunityConstEntry  

zxr10RMAPSetCommName 4.4.1.3902.3.6000.604.2.1.18.1.1
Name of Route-map (1-31 characters)
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(1..31)  

zxr10RMAPSetCommSequence 4.4.1.3902.3.6000.604.2.1.18.1.2
Sequence of Route-map. The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

zxr10RMAPSetCommIsAddtive 4.4.1.3902.3.6000.604.2.1.18.1.3
additive Add to the existing community. Value is 5. none No community attribute. Value is 6.
Status: current Access: not-accessible
OBJECT-TYPE    
  RmapSetComm  

zxr10RMAPSetCommConstVal 4.4.1.3902.3.6000.604.2.1.18.1.4
internet Internet(Well known community). Value is 4. no-advertise Do not advertise to any peer. Value is 2. no-export Do not export to next AS. Value is 1. no-export-subconfed Do not send outside local AS. Value is 3.
Status: current Access: not-accessible
OBJECT-TYPE    
  RmapSetComm  

zxr10RMAPSetCommConstRowStatus 4.4.1.3902.3.6000.604.2.1.18.1.100
RowStatus
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

zxr10RMAPSetCommunityAsnnTable 4.4.1.3902.3.6000.604.2.1.19
Route-map Set Community Table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Zxr10RMAPSetCommunityAsnnEntry

zxr10RMAPSetCommunityAsnnEntry 4.4.1.3902.3.6000.604.2.1.19.1
Set BGP community attribute in aa:nn format. If set community has been setted with attribute addtive, other configs of set community can't be setted without attribute addtive. If zxr10RMAPSetCommAsnn is setted with value 0:0 , the config will transform to config of set community internet. If zxr10RMAPSetCommAsnn is setted with value 0:X , the config will transform to config of set community X in uint format. If zxr10RMAPSetCommUint is setted with value 65535:65281, the config will transform to config of set community no-export. If zxr10RMAPSetCommUint is setted with value 65535:65282, the config will transform to config of set community no-advertise. If zxr10RMAPSetCommUint is setted with value 65535:65283, the config will transform to config of set community no-export-subconfed.
Status: current Access: not-accessible
OBJECT-TYPE    
  Zxr10RMAPSetCommunityAsnnEntry  

zxr10RMAPSetCommAsnnName 4.4.1.3902.3.6000.604.2.1.19.1.1
Name of Route-map (1-31 characters)
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(1..31)  

zxr10RMAPSetCommAsnnSequence 4.4.1.3902.3.6000.604.2.1.19.1.2
The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

zxr10RMAPSetCommAsnnIsAddtive 4.4.1.3902.3.6000.604.2.1.19.1.3
additive Add to the existing community. Value is 5.
Status: current Access: not-accessible
OBJECT-TYPE    
  RmapSetComm  

zxr10RMAPSetCommAsnn 4.4.1.3902.3.6000.604.2.1.19.1.4
Community number in aa:nn format. The range of aa is 0 to 65535. The range of nn is 0 to 65535. The ASCII code of : is 58. The ASCII code from 1 to 9 is 49 to 57.
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(1..12)  

zxr10RMAPSetCommAsnnRowStatus 4.4.1.3902.3.6000.604.2.1.19.1.100
RowStatus
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

zxr10RMAPSetCommunityUintTable 4.4.1.3902.3.6000.604.2.1.20
Route-map Set Community Table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Zxr10RMAPSetCommunityUintEntry

zxr10RMAPSetCommunityUintEntry 4.4.1.3902.3.6000.604.2.1.20.1
Set BGP community attribute in Unsigned32 format. If set community has been setted with addtive attribute, other configs of set community can't be setted without addtive attribute. If zxr10RMAPSetCommUint is setted with value which is larger than 65535, the config will transform to config of set community X:Y in ASNN format. For example,set community 65536 will transform to set community 1:1. If zxr10RMAPSetCommUint is setted with value 4294967041, the config will transform to config of set community no-export. If zxr10RMAPSetCommUint is setted with value 4294967042, the config will transform to config of set community no-advertise. If zxr10RMAPSetCommUint is setted with value 4294967043, the config will transform to config of set community no-export-subconfed.
Status: current Access: not-accessible
OBJECT-TYPE    
  Zxr10RMAPSetCommunityUintEntry  

zxr10RMAPSetCommUintName 4.4.1.3902.3.6000.604.2.1.20.1.1
Name of Route-map (1-31 characters)
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(1..31)  

zxr10RMAPSetCommUintSequence 4.4.1.3902.3.6000.604.2.1.20.1.2
The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

zxr10RMAPSetCommUintIsAddtive 4.4.1.3902.3.6000.604.2.1.20.1.3
additive Add to the existing community. Value is 5.
Status: current Access: not-accessible
OBJECT-TYPE    
  RmapSetComm  

zxr10RMAPSetCommUint 4.4.1.3902.3.6000.604.2.1.20.1.4
Community number in unsigned32 format. The range of config is 1 to 4294967295.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

zxr10RMAPSetCommUintRowStatus 4.4.1.3902.3.6000.604.2.1.20.1.100
RowStatus
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

zxr10RMAPSetDampeningTable 4.4.1.3902.3.6000.604.2.1.21
Route-map Set Dampening Table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Zxr10RMAPSetDampeningEntry

zxr10RMAPSetDampeningEntry 4.4.1.3902.3.6000.604.2.1.21.1
Set BGP route flap dampening parameters
Status: current Access: not-accessible
OBJECT-TYPE    
  Zxr10RMAPSetDampeningEntry  

zxr10RMAPSetDampeningName 4.4.1.3902.3.6000.604.2.1.21.1.1
Name of Route-map (1-31 characters)
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(1..31)  

zxr10RMAPSetDampeningSequence 4.4.1.3902.3.6000.604.2.1.21.1.2
The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

zxr10RMAPSetDampeningHalfLife 4.4.1.3902.3.6000.604.2.1.21.1.3
Half-life time for the penalty. The range of config is 1 to 45. The value for half-life should be smaller than max duration to suppress.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

zxr10RMAPSetDampeningReuse 4.4.1.3902.3.6000.604.2.1.21.1.4
Penalty to start reusing a route. The range of config is 1 to 20000. The value for reusing should be smaller than the value for suppressing.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

zxr10RMAPSetDampeningSuppress 4.4.1.3902.3.6000.604.2.1.21.1.5
Penalty to start suppressing a route. The range of config is 1 to 20000. The value for suppressing should be larger than the value for reusing.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

zxr10RMAPSetDampeningMaxSupTime 4.4.1.3902.3.6000.604.2.1.21.1.6
Maximum duration to suppress a stable route. The range of config is 1 to 255. The value for max duration to suppress should be larger than half-life.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

zxr10RMAPSetDampeningRowStatus 4.4.1.3902.3.6000.604.2.1.21.1.100
RowStatus
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

zxr10RMAPSetDscpTable 4.4.1.3902.3.6000.604.2.1.22
Route-map Set Dscp Table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Zxr10RMAPSetDscpEntry

zxr10RMAPSetDscpEntry 4.4.1.3902.3.6000.604.2.1.22.1
Set DSCP for PBR. This set item conflicts with these items below: set ip precedence set ip tos set ipv6 precedence set ipv6 traffic-class
Status: current Access: not-accessible
OBJECT-TYPE    
  Zxr10RMAPSetDscpEntry  

zxr10RMAPSetDscpName 4.4.1.3902.3.6000.604.2.1.22.1.1
Name of Route-map (1-31 characters)
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(1..31)  

zxr10RMAPSetDscpSequence 4.4.1.3902.3.6000.604.2.1.22.1.2
The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

zxr10RMAPSetDscp 4.4.1.3902.3.6000.604.2.1.22.1.3
Type of service value. The range of config is 0 to 63. 255 is invalid value.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

zxr10RMAPSetDscpRowStatus 4.4.1.3902.3.6000.604.2.1.22.1.100
RowStatus
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

zxr10RMAPSetRtTable 4.4.1.3902.3.6000.604.2.1.23
Route-map Set Rt Table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Zxr10RMAPSetRtEntry

zxr10RMAPSetRtEntry 4.4.1.3902.3.6000.604.2.1.23.1
Set Transitive Route Target extended community. If set extcommunity rt-trans remove has been setted, other types of set extcommunity can't be setted. If set extcommunity rt-trans has been setted with addtive attribute, other configs of set extcommunity rt-trans can't be setted without addtive attribute.
Status: current Access: not-accessible
OBJECT-TYPE    
  Zxr10RMAPSetRtEntry  

zxr10RMAPSetRtName 4.4.1.3902.3.6000.604.2.1.23.1.1
Name of Route-map (1-31 characters)
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(1..31)  

zxr10RMAPSetRtSequence 4.4.1.3902.3.6000.604.2.1.23.1.2
The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

zxr10RMAPSetRtAsnn 4.4.1.3902.3.6000.604.2.1.23.1.3
VPN extended community. This config includes 3 formats. 1.ASNN(X:Y) The range of X is 0 to 65535. The range of X is 0 to 4294967295. 2.ASNDot(X.Y:Z) The range of X is 1 to 65535. The range of Y is 0 to 65535. The range of Z is 0 to 65535. 3.ASNIp(A.B.C.D:X) The range of X is 0 to 65535. The ASCII code of . is 46. The ASCII code of : is 58. The ASCII code from 1 to 9 is 49 to 57.
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(1..12)  

zxr10RMAPSetRtReOrAdd 4.4.1.3902.3.6000.604.2.1.23.1.4
additive Add to the existing extcommunity.Value is 6. remove Remove the existing extcommunity.Value is 7.
Status: current Access: not-accessible
OBJECT-TYPE    
  RmapSetRt  

zxr10RMAPSetRtRowStatus 4.4.1.3902.3.6000.604.2.1.23.1.100
RowStatus
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

zxr10RMAPSetSooTable 4.4.1.3902.3.6000.604.2.1.24
Route-map Set Soo Table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Zxr10RMAPSetSooEntry

zxr10RMAPSetSooEntry 4.4.1.3902.3.6000.604.2.1.24.1
Transitive Site-of-Origin extended community. If set extcommunity soo-trans remove has been setted, other types of set extcommunity can't be setted. The ASCII code of . is 46. The ASCII code of : is 58. The ASCII code from 1 to 9 is 49 to 57.
Status: current Access: not-accessible
OBJECT-TYPE    
  Zxr10RMAPSetSooEntry  

zxr10RMAPSetSooName 4.4.1.3902.3.6000.604.2.1.24.1.1
Name of Route-map (1-31 characters)
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(1..31)  

zxr10RMAPSetSooSequence 4.4.1.3902.3.6000.604.2.1.24.1.2
The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

zxr10RMAPSetSooAsnn 4.4.1.3902.3.6000.604.2.1.24.1.3
VPN extended community. This config includes 3 formats. 1.ASNN(X:Y) The range of X is 0 to 65535. The range of X is 0 to 4294967295. 2.ASNDot(X.Y:Z) The range of X is 1 to 65535. The range of Y is 0 to 65535. The range of Z is 0 to 65535. 3.ASNIp(A.B.C.D:X) The range of X is 0 to 65535.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(1..12)  

zxr10RMAPSetSooRemove 4.4.1.3902.3.6000.604.2.1.24.1.4
Remove the existing extcommunity.Value is 7
Status: current Access: read-create
OBJECT-TYPE    
  RmapSetRt  

zxr10RMAPSetSooRowStatus 4.4.1.3902.3.6000.604.2.1.24.1.100
RowStatus
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

zxr10RMAPSetGlobalTable 4.4.1.3902.3.6000.604.2.1.25
Route-map Set Global Table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Zxr10RMAPSetGlobalEntry

zxr10RMAPSetGlobalEntry 4.4.1.3902.3.6000.604.2.1.25.1
Set global route for PBR. This set item sets the route-map name with ipv4 type. It conflicts with other match or set items which set the route-map name with ipv6 type. It conflicts with these set items below: set interface set ip next-hop set ipv6 next-hop set next-hop set ip path set ipv6 path set vrf
Status: current Access: not-accessible
OBJECT-TYPE    
  Zxr10RMAPSetGlobalEntry  

zxr10RMAPSetGlobalName 4.4.1.3902.3.6000.604.2.1.25.1.1
Name of Route-map (1-31 characters)
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(1..31)  

zxr10RMAPSetGlobalSequence 4.4.1.3902.3.6000.604.2.1.25.1.2
The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

zxr10RMAPSetGlobal 4.4.1.3902.3.6000.604.2.1.25.1.3
It expresses that whether this config is setted or not.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

zxr10RMAPSetGlobalIPAddr 4.4.1.3902.3.6000.604.2.1.25.1.4
IP address of next hop. This attribut may be setted or not. 0 is invaid value.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

zxr10RMAPSetGlobalIpConst 4.4.1.3902.3.6000.604.2.1.25.1.5
If zxr10RMAPSetGlobalIPAddr is setted, this attribut should be setted with value 3
Status: current Access: read-create
OBJECT-TYPE    
  RmapSetGlobalIpConst  

zxr10RMAPSetGlobalNextHopConst 4.4.1.3902.3.6000.604.2.1.25.1.6
If zxr10RMAPSetGlobalIPAddr is setted, this attribut should be setted with value 1
Status: current Access: read-create
OBJECT-TYPE    
  RmapSetGlobalNextHopConst  

zxr10RMAPSetGlobalRowStatus 4.4.1.3902.3.6000.604.2.1.25.1.100
RowStatus
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

zxr10RMAPSetInterfaceTable 4.4.1.3902.3.6000.604.2.1.26
Route-map Set Interface Table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Zxr10RMAPSetInterfaceEntry

zxr10RMAPSetInterfaceEntry 4.4.1.3902.3.6000.604.2.1.26.1
Set output interface. Each sequence has 10 set interface items at most. This set item supports these types of interface: [PORT-CLASS-OC, PORT-TYPE-OC48] [PORT-TYPE-OC192, PORT-CLASS-OC-END] PORT-TYPE-NULL PORT-TYPE-TE-TUNNEL PORT-TYPE-GRE-TUNNEL PORT-TYPE-OC3-C-E1 PORT-TYPE-OC3-C-E1-TS PORT-TYPE-E1-C-TS [PORT-TYPE-DIALER,PORT-TYPE-DIALER]. It conflicts with these set items below: set vrf set global
Status: current Access: not-accessible
OBJECT-TYPE    
  Zxr10RMAPSetInterfaceEntry  

zxr10RMAPSetInterfaceName 4.4.1.3902.3.6000.604.2.1.26.1.1
Name of Route-map (1-31 characters)
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(1..31)  

zxr10RMAPSetInterfaceSequence 4.4.1.3902.3.6000.604.2.1.26.1.2
The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

zxr10RMAPSetInterface 4.4.1.3902.3.6000.604.2.1.26.1.3
Interface Name. Each sequence has 10 set interface items at most.
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(1..31)  

zxr10RMAPSetInterfaceRowStatus 4.4.1.3902.3.6000.604.2.1.26.1.100
RowStatus
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

zxr10RMAPSetIpMetricTable 4.4.1.3902.3.6000.604.2.1.27
Route-map Set IpMetric Table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Zxr10RMAPSetIpMetricEntry

zxr10RMAPSetIpMetricEntry 4.4.1.3902.3.6000.604.2.1.27.1
Set metric value for destination routing protocol. This set item sets the route-map name with ipv4 type. It conflicts with other match or set items which set the route-map name with ipv6 type.
Status: current Access: not-accessible
OBJECT-TYPE    
  Zxr10RMAPSetIpMetricEntry  

zxr10RMAPSetIpMetricName 4.4.1.3902.3.6000.604.2.1.27.1.1
Name of Route-map (1-31 characters)
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(1..31)  

zxr10RMAPSetIpMetricSequence 4.4.1.3902.3.6000.604.2.1.27.1.2
The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

zxr10RMAPSetIpMetricAct 4.4.1.3902.3.6000.604.2.1.27.1.3
plus :Add metric.Value is 1. minus:Del metric.Value is 2. unset:No Action.Value is 0.
Status: current Access: read-create
OBJECT-TYPE    
  RmapSetMetricAct  

zxr10RMAPSetIpMetricValue 4.4.1.3902.3.6000.604.2.1.27.1.4
Metric value. The range of config is 0 to 4294967295
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

zxr10RMAPSetIpMetricRowStatus 4.4.1.3902.3.6000.604.2.1.27.1.100
RowStatus
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

zxr10RMAPSetIpMetricTypeTable 4.4.1.3902.3.6000.604.2.1.28
Route-map Set IpMetricType Table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Zxr10RMAPSetIpMetricTypeEntry

zxr10RMAPSetIpMetricTypeEntry 4.4.1.3902.3.6000.604.2.1.28.1
Set type of metric for destination routing protocol. This set item sets the route-map name with ipv4 type. It conflicts with other match or set items which set the route-map name with ipv6 type.
Status: current Access: not-accessible
OBJECT-TYPE    
  Zxr10RMAPSetIpMetricTypeEntry  

zxr10RMAPSetIpMetricTypeName 4.4.1.3902.3.6000.604.2.1.28.1.1
Name of Route-map (1-31 characters)
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(1..31)  

zxr10RMAPSetIpMetricTypeSequence 4.4.1.3902.3.6000.604.2.1.28.1.2
The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

zxr10RMAPSetIpMetricType 4.4.1.3902.3.6000.604.2.1.28.1.3
external IS-IS external metric.Value is 2. internal IS-IS internal metric.Value is 1. type-1 OSPF external type 1 metric.Value is 3. type-2 OSPF external type 2 metric.Value is 4. 0 is invalid value.
Status: current Access: read-create
OBJECT-TYPE    
  RmapSetMetricType  

zxr10RMAPSetIpMetricTypeRowStat 4.4.1.3902.3.6000.604.2.1.28.1.100
RowStatus
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

zxr10RMAPSetIpNextHopTable 4.4.1.3902.3.6000.604.2.1.29
Route-map Set IpNextHop Table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Zxr10RMAPSetIpNextHopEntry

zxr10RMAPSetIpNextHopEntry 4.4.1.3902.3.6000.604.2.1.29.1
Set Next hop address. This set item sets the route-map name with ipv4 type. It conflicts with other match or set items which set the route-map name with ipv6 type. It conflicts with these set items below: set vrf set global
Status: current Access: not-accessible
OBJECT-TYPE    
  Zxr10RMAPSetIpNextHopEntry  

zxr10RMAPSetIpNextHopName 4.4.1.3902.3.6000.604.2.1.29.1.1
Name of Route-map (1-31 characters)
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(1..31)  

zxr10RMAPSetIpNextHopSequence 4.4.1.3902.3.6000.604.2.1.29.1.2
The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

zxr10RMAPSetIpNextHop 4.4.1.3902.3.6000.604.2.1.29.1.3
IP address of next hop. 0 is invalid value. Each sequence has 10 set ip next-hop items at most.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpAddress  

zxr10RMAPSetIpNextHopSqa 4.4.1.3902.3.6000.604.2.1.29.1.4
Track name. This attribut may be setted or not.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(1..31)  

zxr10RMAPSetIpNextHopRowStatus 4.4.1.3902.3.6000.604.2.1.29.1.100
RowStatus
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

zxr10RMAPSetIpPathTable 4.4.1.3902.3.6000.604.2.1.30
Route-map Set IpPath Table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Zxr10RMAPSetIpPathEntry

zxr10RMAPSetIpPathEntry 4.4.1.3902.3.6000.604.2.1.30.1
Set output interface. This set item supports these types of interface: [PORT-CLASS-FEI,PORT-CLASS-GEI-END]. This set item sets the route-map name with ipv4 type. It conflicts with other match or set items which set the route-map name with ipv6 type. It conflicts with these set items below: set vrf set global
Status: current Access: not-accessible
OBJECT-TYPE    
  Zxr10RMAPSetIpPathEntry  

zxr10RMAPIpPathName 4.4.1.3902.3.6000.604.2.1.30.1.1
Name of Route-map (1-31 characters)
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(1..31)  

zxr10RMAPIpPathSequence 4.4.1.3902.3.6000.604.2.1.30.1.2
The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

zxr10RMAPSetIpPathIntf 4.4.1.3902.3.6000.604.2.1.30.1.3
Name of Interface (1-31 characters)
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(1..31)  

zxr10RMAPSetIpPathNextHop 4.4.1.3902.3.6000.604.2.1.30.1.4
IP address of next hop.0 is invalid value.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

zxr10RMAPSetIpPathRowStatus 4.4.1.3902.3.6000.604.2.1.30.1.100
RowStatus
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

zxr10RMAPSetIpPrecTable 4.4.1.3902.3.6000.604.2.1.31
Route-map Set IpPrec Table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Zxr10RMAPSetIpPrecEntry

zxr10RMAPSetIpPrecEntry 4.4.1.3902.3.6000.604.2.1.31.1
Set precedence field. This set item sets the route-map name with ipv4 type. It conflicts with other match or set items which set the route-map name with ipv6 type. It conflicts with these set items below: set dscp. If zxr10RMAPSetIpPrec is getted with value 255, it expresses this config is invalid.
Status: current Access: not-accessible
OBJECT-TYPE    
  Zxr10RMAPSetIpPrecEntry  

zxr10RMAPSetIpPrecName 4.4.1.3902.3.6000.604.2.1.31.1.1
Name of Route-map (1-31 characters)
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(1..31)  

zxr10RMAPSetIpPrecSequence 4.4.1.3902.3.6000.604.2.1.31.1.2
The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

zxr10RMAPSetIpPrec 4.4.1.3902.3.6000.604.2.1.31.1.3
Precedence value. The range of config is 0 to 7. 255 is invalid value. If zxr10RMAPSetIpPrec is setted with valid value, zxr10RMAPSetIpPrecMap should be setted with 255.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

zxr10RMAPSetIpPrecMap 4.4.1.3902.3.6000.604.2.1.31.1.4
critical Set critical precedence (6) flash Set flash precedence (4) flash-override Set flash override precedence (5) immediate Set immediate precedence (3) internet Set internetwork control precedence (7) network Set network control precedence (8) priority Set priority precedence (2) routine Set routine precedence (1) 255 is invalid value. If zxr10RMAPSetIpPrecMap is setted with valid value, zxr10RMAPSetIpPrec should be setted with 255.
Status: current Access: read-create
OBJECT-TYPE    
  RmapSetPrec  

zxr10RMAPSetIpPrecRowStatus 4.4.1.3902.3.6000.604.2.1.31.1.100
RowStatus
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

zxr10RMAPSetIpTagTable 4.4.1.3902.3.6000.604.2.1.32
Route-map Set IpTag Table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Zxr10RMAPSetIpTagEntry

zxr10RMAPSetIpTagEntry 4.4.1.3902.3.6000.604.2.1.32.1
Set tag value for destination routing protocol. This set item sets the route-map name with ipv4 type. It conflicts with other match or set items which set the route-map name with ipv6 type.
Status: current Access: not-accessible
OBJECT-TYPE    
  Zxr10RMAPSetIpTagEntry  

zxr10RMAPSetIpTagName 4.4.1.3902.3.6000.604.2.1.32.1.1
Name of Route-map (1-31 characters)
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(1..31)  

zxr10RMAPSetIpTagSequence 4.4.1.3902.3.6000.604.2.1.32.1.2
The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

zxr10RMAPSetIpTag 4.4.1.3902.3.6000.604.2.1.32.1.3
Set tag value for destination routing protocol. The range of config is 0 to 4294967295.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

zxr10RMAPSetIpTagRowStatus 4.4.1.3902.3.6000.604.2.1.32.1.100
RowStatus
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

zxr10RMAPSetIpTosTable 4.4.1.3902.3.6000.604.2.1.33
Route-map Set IpTos Table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Zxr10RMAPSetIpTosEntry

zxr10RMAPSetIpTosEntry 4.4.1.3902.3.6000.604.2.1.33.1
Set type of service field. This set item sets the route-map name with ipv4 type. It conflicts with other match or set items which set the route-map name with ipv6 type. It conflicts with these set items below: set dscp
Status: current Access: not-accessible
OBJECT-TYPE    
  Zxr10RMAPSetIpTosEntry  

zxr10RMAPSetIpTosName 4.4.1.3902.3.6000.604.2.1.33.1.1
Name of Route-map (1-31 characters)
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(1..31)  

zxr10RMAPSetIpTosSequence 4.4.1.3902.3.6000.604.2.1.33.1.2
The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

zxr10RMAPSetIpTos 4.4.1.3902.3.6000.604.2.1.33.1.3
Type of service value. The range of config is 0 to 15. 255 is invalid value. If zxr10RMAPSetIpTos is setted with valid value, zxr10RMAPSetIpTosMap should be setted with 255.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

zxr10RMAPSetIpTosMap 4.4.1.3902.3.6000.604.2.1.33.1.4
max-reliability Set max reliable TOS (3) max-throughput Set max throughput TOS (4) min-delay Set min delay TOS (5) min-monetary-cost Set min monetary cost TOS (2) normal Set normal TOS (1) 255 is invalid value. If zxr10RMAPSetIpTosMap is setted with valid value, zxr10RMAPSetIpTos should be setted with 255.
Status: current Access: read-create
OBJECT-TYPE    
  RmapSetTos  

zxr10RMAPSetIpTosRowStatus 4.4.1.3902.3.6000.604.2.1.33.1.100
RowStatus
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

zxr10RMAPSetIpv6MetricTable 4.4.1.3902.3.6000.604.2.1.34
Route-map Set Ipv6Metric Table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Zxr10RMAPSetIpv6MetricEntry

zxr10RMAPSetIpv6MetricEntry 4.4.1.3902.3.6000.604.2.1.34.1
Set metric value for destination routing protocol. This set item sets the route-map name with ipv6 type. It conflicts with other match or set items which set the route-map name with ipv4 type.
Status: current Access: not-accessible
OBJECT-TYPE    
  Zxr10RMAPSetIpv6MetricEntry  

zxr10RMAPSetIpv6MetricName 4.4.1.3902.3.6000.604.2.1.34.1.1
Name of Route-map (1-31 characters)
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(1..31)  

zxr10RMAPSetIpv6MetricSequence 4.4.1.3902.3.6000.604.2.1.34.1.2
The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

zxr10RMAPSetIpv6MetricAct 4.4.1.3902.3.6000.604.2.1.34.1.3
plus :Add metric.Value is 1. minus:Del metric.Value is 2. unset:No Action.Value is 0.
Status: current Access: read-create
OBJECT-TYPE    
  RmapSetMetricAct  

zxr10RMAPSetIpv6MetricValue 4.4.1.3902.3.6000.604.2.1.34.1.4
Metric value. The range of config is 0 to 4294967295.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

zxr10RMAPSetIpv6MetricRowStatus 4.4.1.3902.3.6000.604.2.1.34.1.100
RowStatus
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

zxr10RMAPSetIpv6MetricTypeTable 4.4.1.3902.3.6000.604.2.1.35
Route-map Set Ipv6MetricType Table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Zxr10RMAPSetIpv6MetricTypeEntry

zxr10RMAPSetIpv6MetricTypeEntry 4.4.1.3902.3.6000.604.2.1.35.1
Set type of metric for destination routing protocol. This set item sets the route-map name with ipv6 type. It conflicts with other match or set items which set the route-map name with ipv4 type.
Status: current Access: not-accessible
OBJECT-TYPE    
  Zxr10RMAPSetIpv6MetricTypeEntry  

zxr10RMAPSetIpv6MetricTypeName 4.4.1.3902.3.6000.604.2.1.35.1.1
Name of Route-map (1-31 characters)
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(1..31)  

zxr10RMAPSetIpv6MetricTypeSeq 4.4.1.3902.3.6000.604.2.1.35.1.2
The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

zxr10RMAPSetIpv6MetricType 4.4.1.3902.3.6000.604.2.1.35.1.3
external IS-IS external metric.Value is 2. internal IS-IS internal metric.Value is 1. type-1 OSPF external type 1 metric.Value is 3. type-2 OSPF external type 2 metric.Value is 4. 0 is invalid value
Status: current Access: read-create
OBJECT-TYPE    
  RmapSetMetricType  

zxr10RMAPSetIpv6MetricTypeRowSta 4.4.1.3902.3.6000.604.2.1.35.1.100
RowStatus
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

zxr10RMAPSetIpv6NextHopTable 4.4.1.3902.3.6000.604.2.1.36
Route-map Set IpNextHop Table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Zxr10RMAPSetIpv6NextHopEntry

zxr10RMAPSetIpv6NextHopEntry 4.4.1.3902.3.6000.604.2.1.36.1
Set Next hop address. This set item sets the route-map name with ipv6 type. It conflicts with other match or set items which set the route-map name with ipv4 type. It conflicts with these set items below: set vrf set global
Status: current Access: not-accessible
OBJECT-TYPE    
  Zxr10RMAPSetIpv6NextHopEntry  

zxr10RMAPSetIpv6NextHopName 4.4.1.3902.3.6000.604.2.1.36.1.1
Name of Route-map (1-31 characters)
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(1..31)  

zxr10RMAPSetIpv6NextHopSequence 4.4.1.3902.3.6000.604.2.1.36.1.2
The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

zxr10RMAPSetIpv6NextHop 4.4.1.3902.3.6000.604.2.1.36.1.3
IPv6 address of next hop. 0 is invalid value. Each sequence has 10 set ipv6 next-hop items at most.
Status: current Access: not-accessible
OBJECT-TYPE    
  Ipv6Address  

zxr10RMAPSetIpv6NextHopRowStatus 4.4.1.3902.3.6000.604.2.1.36.1.100
RowStatus
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

zxr10RMAPSetIpv6PathTable 4.4.1.3902.3.6000.604.2.1.37
Route-map Set Ipv6Path Table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Zxr10RMAPSetIpv6PathEntry

zxr10RMAPSetIpv6PathEntry 4.4.1.3902.3.6000.604.2.1.37.1
Set output interface. This set item supports these types of interface: [PORT-CLASS-FEI,PORT-CLASS-GEI-END]. This set item sets the route-map name with ipv6 type. It conflicts with other match or set items which set the route-map name with ipv4 type. It conflicts with these set items below: set vrf set global
Status: current Access: not-accessible
OBJECT-TYPE    
  Zxr10RMAPSetIpv6PathEntry  

zxr10RMAPSetIpv6PathName 4.4.1.3902.3.6000.604.2.1.37.1.1
Name of Route-map (1-31 characters)
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(1..31)  

zxr10RMAPSetIpv6PathSequence 4.4.1.3902.3.6000.604.2.1.37.1.2
The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

zxr10RMAPSetIpv6PathIntf 4.4.1.3902.3.6000.604.2.1.37.1.3
Name of Interface (1-31 characters)
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(1..31)  

zxr10RMAPSetIpv6PathNextHop 4.4.1.3902.3.6000.604.2.1.37.1.4
IPv6 address of next hop.0 is invalid value.
Status: current Access: read-create
OBJECT-TYPE    
  Ipv6Address  

zxr10RMAPSetIpv6PathRowStatus 4.4.1.3902.3.6000.604.2.1.37.1.100
RowStatus
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

zxr10RMAPSetIpv6PrecTable 4.4.1.3902.3.6000.604.2.1.38
Route-map Set Ipv6Prec Table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Zxr10RMAPSetIpv6PrecEntry

zxr10RMAPSetIpv6PrecEntry 4.4.1.3902.3.6000.604.2.1.38.1
Set precedence field. This set item sets the route-map name with ipv6 type. It conflicts with other match or set items which set the route-map name with ipv4 type. It conflicts with these set items below: set dscp 255 is invalid value.
Status: current Access: not-accessible
OBJECT-TYPE    
  Zxr10RMAPSetIpv6PrecEntry  

zxr10RMAPSetIpv6precName 4.4.1.3902.3.6000.604.2.1.38.1.1
Name of Route-map (1-31 characters)
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(1..31)  

zxr10RMAPSetIpv6precSequence 4.4.1.3902.3.6000.604.2.1.38.1.2
The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

zxr10RMAPSetIpv6prec 4.4.1.3902.3.6000.604.2.1.38.1.3
Precedence value. 255 is invalid. The range of config is 0 to 7. If zxr10RMAPSetIpv6prec is setted with valid value, zxr10RMAPSetIpv6precMap should be setted with 255.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

zxr10RMAPSetIpv6precMap 4.4.1.3902.3.6000.604.2.1.38.1.4
critical Set critical precedence (6) flash Set flash precedence (4) flash-override Set flash override precedence (5) immediate Set immediate precedence (3) internet Set internetwork control precedence (7) network Set network control precedence (8) priority Set priority precedence (2) routine Set routine precedence (1) 255 is invalid value. If zxr10RMAPSetIpv6precMap is setted with valid value, zxr10RMAPSetIpv6prec should be setted with 255.
Status: current Access: read-create
OBJECT-TYPE    
  RmapSetPrec  

zxr10RMAPSetIpv6precRowStatus 4.4.1.3902.3.6000.604.2.1.38.1.100
RowStatus
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

zxr10RMAPSetIpv6TagTable 4.4.1.3902.3.6000.604.2.1.39
Route-map Set Ipv6Tag Table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Zxr10RMAPSetIpv6TagEntry

zxr10RMAPSetIpv6TagEntry 4.4.1.3902.3.6000.604.2.1.39.1
Set tag value for destination routing protocol. This set item sets the route-map name with ipv6 type. It conflicts with other match or set items which set the route-map name with ipv4 type.
Status: current Access: not-accessible
OBJECT-TYPE    
  Zxr10RMAPSetIpv6TagEntry  

zxr10RMAPSetIpv6TagName 4.4.1.3902.3.6000.604.2.1.39.1.1
Name of Route-map (1-31 characters)
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(1..31)  

zxr10RMAPSetIpv6TagSequence 4.4.1.3902.3.6000.604.2.1.39.1.2
The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

zxr10RMAPSetIpv6Tag 4.4.1.3902.3.6000.604.2.1.39.1.3
Precedence value. The range of config is 0 to 4294967295.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

zxr10RMAPSetIpv6TagRowStatus 4.4.1.3902.3.6000.604.2.1.39.1.100
RowStatus
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

zxr10RMAPSetIpv6TrafficTable 4.4.1.3902.3.6000.604.2.1.40
Route-map Set Ipv6Traffic Table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Zxr10RMAPSetIpv6TrafficEntry

zxr10RMAPSetIpv6TrafficEntry 4.4.1.3902.3.6000.604.2.1.40.1
Set IPv6 traffic-class. This set item sets the route-map name with ipv6 type. It conflicts with other match or set items which set the route-map name with ipv4 type. It conflicts with these set items below: set dscp
Status: current Access: not-accessible
OBJECT-TYPE    
  Zxr10RMAPSetIpv6TrafficEntry  

zxr10RMAPSetIpv6TrafficName 4.4.1.3902.3.6000.604.2.1.40.1.1
Name of Route-map (1-31 characters)
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(1..31)  

zxr10RMAPSetIpv6TrafficSequence 4.4.1.3902.3.6000.604.2.1.40.1.2
The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

zxr10RMAPSetIpv6Traffic 4.4.1.3902.3.6000.604.2.1.40.1.3
Value of IPv6 traffic-class. The range of config is 0 to 255.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

zxr10RMAPSetIpv6TrafficRowStatus 4.4.1.3902.3.6000.604.2.1.40.1.100
RowStatus
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

zxr10RMAPSetLevelTable 4.4.1.3902.3.6000.604.2.1.41
Route-map Set Level Table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Zxr10RMAPSetLevelEntry

zxr10RMAPSetLevelEntry 4.4.1.3902.3.6000.604.2.1.41.1
Set where to import route
Status: current Access: not-accessible
OBJECT-TYPE    
  Zxr10RMAPSetLevelEntry  

zxr10RMAPSetLevelName 4.4.1.3902.3.6000.604.2.1.41.1.1
Name of Route-map (1-31 characters)
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(1..31)  

zxr10RMAPSetLevelSequence 4.4.1.3902.3.6000.604.2.1.41.1.2
The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

zxr10RMAPSetLevel 4.4.1.3902.3.6000.604.2.1.41.1.3
level-1 Import into a level-1 area.Value is 1. level-1-2 Import into level-1 and level-2.Value is 3. level-2 Import into level-2 sub-domain.Value is 2. 0 is invalid value.
Status: current Access: read-create
OBJECT-TYPE    
  RmapSetLevel  

zxr10RMAPSetLevelRowStatus 4.4.1.3902.3.6000.604.2.1.41.1.100
RowStatus
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

zxr10RMAPSetLocalPreTable 4.4.1.3902.3.6000.604.2.1.42
Route-map Set LocalPreference Table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Zxr10RMAPSetLocalPreEntry

zxr10RMAPSetLocalPreEntry 4.4.1.3902.3.6000.604.2.1.42.1
Set BGP local preference path attribute.
Status: current Access: not-accessible
OBJECT-TYPE    
  Zxr10RMAPSetLocalPreEntry  

zxr10RMAPSetLocalPreName 4.4.1.3902.3.6000.604.2.1.42.1.1
Name of Route-map (1-31 characters)
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(1..31)  

zxr10RMAPSetLocalPreSequence 4.4.1.3902.3.6000.604.2.1.42.1.2
The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

zxr10RMAPSetLocalPre 4.4.1.3902.3.6000.604.2.1.42.1.3
Preference value. The range of config is 0 to 4294967295.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

zxr10RMAPSetLocalPreRowStatus 4.4.1.3902.3.6000.604.2.1.42.1.100
RowStatus
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

zxr10RMAPSetMplsTable 4.4.1.3902.3.6000.604.2.1.43
Route-map Set Mpls-label Table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Zxr10RMAPSetMplsEntry

zxr10RMAPSetMplsEntry 4.4.1.3902.3.6000.604.2.1.43.1
Set MPLS label for prefix
Status: current Access: not-accessible
OBJECT-TYPE    
  Zxr10RMAPSetMplsEntry  

zxr10RMAPSetMplsName 4.4.1.3902.3.6000.604.2.1.43.1.1
Name of Route-map (1-31 characters)
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(1..31)  

zxr10RMAPSetMplsSequence 4.4.1.3902.3.6000.604.2.1.43.1.2
The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

zxr10RMAPSetMpls 4.4.1.3902.3.6000.604.2.1.43.1.3
Set MPLS label for prefix. It expresses that whether this config is valid or not.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

zxr10RMAPSetMplsRowStatus 4.4.1.3902.3.6000.604.2.1.43.1.100
RowStatus
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

zxr10RMAPSetNextHopTable 4.4.1.3902.3.6000.604.2.1.44
Route-map Set NextHop Table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Zxr10RMAPSetNextHopEntry

zxr10RMAPSetNextHopEntry 4.4.1.3902.3.6000.604.2.1.44.1
Set IP address of next hop. It conflicts with these set items below: set vrf set global
Status: current Access: not-accessible
OBJECT-TYPE    
  Zxr10RMAPSetNextHopEntry  

zxr10RMAPSetNextHopName 4.4.1.3902.3.6000.604.2.1.44.1.1
Name of Route-map (1-31 characters)
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(1..31)  

zxr10RMAPSetNextHopSequence 4.4.1.3902.3.6000.604.2.1.44.1.2
The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

zxr10RMAPSetNextHop 4.4.1.3902.3.6000.604.2.1.44.1.3
IP address of next hop. 0 is invalid value. Each sequence has 10 set next-hop items at most.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpAddress  

zxr10RMAPSetNextHopRowStatus 4.4.1.3902.3.6000.604.2.1.44.1.100
RowStatus
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

zxr10RMAPSetOriginTable 4.4.1.3902.3.6000.604.2.1.45
Route-map Set Origin Table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Zxr10RMAPSetOriginEntry

zxr10RMAPSetOriginEntry 4.4.1.3902.3.6000.604.2.1.45.1
Set BGP origin code
Status: current Access: not-accessible
OBJECT-TYPE    
  Zxr10RMAPSetOriginEntry  

zxr10RMAPSetOriginName 4.4.1.3902.3.6000.604.2.1.45.1.1
Name of Route-map (1-31 characters)
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(1..31)  

zxr10RMAPSetOriginSequence 4.4.1.3902.3.6000.604.2.1.45.1.2
The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

zxr10RMAPSetOrigin 4.4.1.3902.3.6000.604.2.1.45.1.3
egp Remote EGP.Value is 2. igp Local IGP.Value is 1. incomplete Unknown heritage.Value is 3. 0 is invalid value.
Status: current Access: read-create
OBJECT-TYPE    
  RmapSetOrigin  

zxr10RMAPSetOriginRowStatus 4.4.1.3902.3.6000.604.2.1.45.1.100
RowStatus
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

zxr10RMAPSetQosIdTable 4.4.1.3902.3.6000.604.2.1.46
Route-map Set QosId Table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Zxr10RMAPSetQosIdEntry

zxr10RMAPSetQosIdEntry 4.4.1.3902.3.6000.604.2.1.46.1
Set QoS ID of routing
Status: current Access: not-accessible
OBJECT-TYPE    
  Zxr10RMAPSetQosIdEntry  

zxr10RMAPSetQosIdName 4.4.1.3902.3.6000.604.2.1.46.1.1
Name of Route-map (1-31 characters)
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(1..31)  

zxr10RMAPSetQosIdSequence 4.4.1.3902.3.6000.604.2.1.46.1.2
The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

zxr10RMAPSetQosId 4.4.1.3902.3.6000.604.2.1.46.1.3
QoS ID. The range of config is 1 to 16000. 0 is invalid value.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

zxr10RMAPSetQosIdRowStatus 4.4.1.3902.3.6000.604.2.1.46.1.100
RowStatus
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

zxr10RMAPSetVrfTable 4.4.1.3902.3.6000.604.2.1.47
Route-map Set Vrf Table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Zxr10RMAPSetVrfEntry

zxr10RMAPSetVrfEntry 4.4.1.3902.3.6000.604.2.1.47.1
Set virtual route forwarding name. This set item sets the route-map name with ipv4 type. It conflicts with other match or set items which set the route-map name with ipv6 type. It conflicts with these set items below: set interface set ip next-hop set ipv6 next-hop set next-hop set global
Status: current Access: not-accessible
OBJECT-TYPE    
  Zxr10RMAPSetVrfEntry  

zxr10RMAPSetVrfName 4.4.1.3902.3.6000.604.2.1.47.1.1
Name of Route-map (1-31 characters)
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(1..31)  

zxr10RMAPSetVrfSequence 4.4.1.3902.3.6000.604.2.1.47.1.2
The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

zxr10RMAPSetVrf 4.4.1.3902.3.6000.604.2.1.47.1.3
Virtual route forwarding name
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(1..32)  

zxr10RMAPSetVrfNextHop 4.4.1.3902.3.6000.604.2.1.47.1.4
IP address of next hop. 0 is invalid value. This attribut may be setted or not.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

zxr10RMAPSetVrfSqa 4.4.1.3902.3.6000.604.2.1.47.1.5
Track name. This attribut may be setted or not.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(1..31)  

zxr10RMAPSetVrfIpConst 4.4.1.3902.3.6000.604.2.1.47.1.6
If zxr10RMAPSetVrfNextHop is setted, this attribute should be setted with value 1.
Status: current Access: read-create
OBJECT-TYPE    
  RmapSetVrfIpConst  

zxr10RMAPSetVrfNextHopConst 4.4.1.3902.3.6000.604.2.1.47.1.7
If zxr10RMAPSetVrfNextHop is setted, this attribute should be setted with value 2.
Status: current Access: read-create
OBJECT-TYPE    
  RmapSetVrfNextHopConst  

zxr10RMAPSetVrfRowStatus 4.4.1.3902.3.6000.604.2.1.47.1.100
RowStatus
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

zxr10RMAPMatchAsLenTable 4.4.1.3902.3.6000.604.2.1.48
Route-map Match As-path-length Table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Zxr10RMAPMatchAsLenEntry

zxr10RMAPMatchAsLenEntry 4.4.1.3902.3.6000.604.2.1.48.1
Match BGP as-path-length
Status: current Access: not-accessible
OBJECT-TYPE    
  Zxr10RMAPMatchAsLenEntry  

zxr10RMAPMatchAsLenName 4.4.1.3902.3.6000.604.2.1.48.1.1
Name of Route-map (1-31 characters)
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(1..31)  

zxr10RMAPMatchAsLenSequence 4.4.1.3902.3.6000.604.2.1.48.1.2
The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..65535  

zxr10RMAPMatchAsLenAlg 4.4.1.3902.3.6000.604.2.1.48.1.3
eq Equal as-path length to be matched.Value is 1. ge Minimum as-path length to be matched.Value is 2. le Maximun as-path length to be matched.Value is 3.
Status: current Access: read-create
OBJECT-TYPE    
  RmapMatchAlg  

zxr10RMAPMatchAsLen 4.4.1.3902.3.6000.604.2.1.48.1.4
As-path length. The range of config is 0 to 255.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..255  

zxr10RMAPMatchAsLenRowStatus 4.4.1.3902.3.6000.604.2.1.48.1.100
RowStatus
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

zxr10RMAPMatchAsUnqLenTable 4.4.1.3902.3.6000.604.2.1.49
Route-map Match As-path-unique-length Table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Zxr10RMAPMatchAsUnqLenEntry

zxr10RMAPMatchAsUnqLenEntry 4.4.1.3902.3.6000.604.2.1.49.1
Match BGP as-path-unique-length
Status: current Access: not-accessible
OBJECT-TYPE    
  Zxr10RMAPMatchAsUnqLenEntry  

zxr10RMAPMatchAsUnqLenName 4.4.1.3902.3.6000.604.2.1.49.1.1
Name of Route-map (1-31 characters)
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(1..31)  

zxr10RMAPMatchAsUnqLenSequence 4.4.1.3902.3.6000.604.2.1.49.1.2
The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..65535  

zxr10RMAPMatchAsUnqLenAlg 4.4.1.3902.3.6000.604.2.1.49.1.3
eq Equal as-path length to be matched.Value is 1. ge Minimum as-path length to be matched.Value is 2. le Maximun as-path length to be matched.Value is 3.
Status: current Access: read-create
OBJECT-TYPE    
  RmapMatchAlg  

zxr10RMAPMatchAsUnqLen 4.4.1.3902.3.6000.604.2.1.49.1.4
As-path unique length. The range of config is 0 to 255.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..255  

zxr10RMAPMatchAsUnqLenRowStatus 4.4.1.3902.3.6000.604.2.1.49.1.100
RowStatus
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

zxr10RMAPMatchIpSourceAclTable 4.4.1.3902.3.6000.604.2.1.50
Route-map Match IpSource Table(match ip source by acl).
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Zxr10RMAPMatchIpSourceAclEntry

zxr10RMAPMatchIpSourceAclEntry 4.4.1.3902.3.6000.604.2.1.50.1
Match source ip address of route or match packet. This match item sets the route-map name with ipv4 type. It conflicts with other match or set items which set the route-map name with ipv6 type. Otherwise, It conflicts with the item that match ip source by pfl. If zxr10RMAPsourceIsConfigAcl is true,it expresses that this config is match ip source by acl.
Status: current Access: not-accessible
OBJECT-TYPE    
  Zxr10RMAPMatchIpSourceAclEntry  

zxr10RMAPMatchSourceAclName 4.4.1.3902.3.6000.604.2.1.50.1.1
Name of Route-map (1-31 characters)
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(1..31)  

zxr10RMAPMatchSourceAclSequence 4.4.1.3902.3.6000.604.2.1.50.1.2
The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..65535  

zxr10RMAPSourceAclName 4.4.1.3902.3.6000.604.2.1.50.1.3
Name of an access-list(1-31 characters). Each sequence has 10 match ip source items at most.
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(1..31)  

zxr10RMAPSourceIsConfigAcl 4.4.1.3902.3.6000.604.2.1.50.1.4
It expresses that this config is match ip source by acl.
Status: current Access: not-accessible
OBJECT-TYPE    
  TruthValue  

zxr10RMAPMatchSourceAclRowStatus 4.4.1.3902.3.6000.604.2.1.50.1.100
RowStatus
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

zxr10RMAPMatchIpSourcePflTable 4.4.1.3902.3.6000.604.2.1.51
Route-map Match IpSource Table(match ip source by pfl)
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Zxr10RMAPMatchIpSourcePflEntry

zxr10RMAPMatchIpSourcePflEntry 4.4.1.3902.3.6000.604.2.1.51.1
Match Source ip address of route or match packet. This match item sets the route-map name with ipv4 type. It conflicts with other match or set items which set the route-map name with ipv6 type. Otherwise, It conflicts with the item that match ip source by acl.
Status: current Access: not-accessible
OBJECT-TYPE    
  Zxr10RMAPMatchIpSourcePflEntry  

zxr10RMAPMatchSourcePflName 4.4.1.3902.3.6000.604.2.1.51.1.1
Name of Route-map (1-31 characters)
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(1..31)  

zxr10RMAPMatchSourcePflSequence 4.4.1.3902.3.6000.604.2.1.51.1.2
The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..65535  

zxr10RMAPSourcePflName 4.4.1.3902.3.6000.604.2.1.51.1.3
Name of a prefix list (1-31 characters). Each sequence has 10 match ip source items at most.
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(1..31)  

zxr10RMAPSourceIsConfigPfl 4.4.1.3902.3.6000.604.2.1.51.1.4
It expresses that this config is match ip source by pfl.
Status: current Access: not-accessible
OBJECT-TYPE    
  TruthValue  

zxr10RMAPMatchSourcePflRowStatus 4.4.1.3902.3.6000.604.2.1.51.1.100
RowStatus
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

zxr10RMAPMatchLocalPrefTable 4.4.1.3902.3.6000.604.2.1.52
Route-map Match local-preference Table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Zxr10RMAPMatchLocalPrefEntry

zxr10RMAPMatchLocalPrefEntry 4.4.1.3902.3.6000.604.2.1.52.1
Match BGP local preference path attribute
Status: current Access: not-accessible
OBJECT-TYPE    
  Zxr10RMAPMatchLocalPrefEntry  

zxr10RMAPMatchLocalPrefName 4.4.1.3902.3.6000.604.2.1.52.1.1
Name of Route-map (1-31 characters)
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(1..31)  

zxr10RMAPMatchLocalPrefSequence 4.4.1.3902.3.6000.604.2.1.52.1.2
The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..65535  

zxr10RMAPMatchLocalPrefAlg 4.4.1.3902.3.6000.604.2.1.52.1.3
eq Equal as-path length to be matched.Value is 1. ge Minimum as-path length to be matched.Value is 2. le Maximun as-path length to be matched.Value is 3.
Status: current Access: read-create
OBJECT-TYPE    
  RmapMatchAlg  

zxr10RMAPMatchLocalPref 4.4.1.3902.3.6000.604.2.1.52.1.4
Preference value. The range of config is 0 to 4294967295.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..4294967295  

zxr10RMAPMatchLocalPrefRowStatus 4.4.1.3902.3.6000.604.2.1.52.1.100
RowStatus
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

zxr10RMAPMatchOriginTable 4.4.1.3902.3.6000.604.2.1.53
Route-map Match Origin Table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Zxr10RMAPMatchOriginEntry

zxr10RMAPMatchOriginEntry 4.4.1.3902.3.6000.604.2.1.53.1
Match BGP origin code
Status: current Access: not-accessible
OBJECT-TYPE    
  Zxr10RMAPMatchOriginEntry  

zxr10RMAPMatchOriginName 4.4.1.3902.3.6000.604.2.1.53.1.1
Name of Route-map (1-31 characters)
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(1..31)  

zxr10RMAPMatchOriginSequence 4.4.1.3902.3.6000.604.2.1.53.1.2
The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..65535  

zxr10RMAPMatchOrigin 4.4.1.3902.3.6000.604.2.1.53.1.3
egp Remote EGP.Value is 2. igp Local IGP.Value is 1. incomplete Unknown heritage.Value is 3. 0 is invalid value.
Status: current Access: read-create
OBJECT-TYPE    
  RmapSetOrigin  

zxr10RMAPMatchOriginRowStatus 4.4.1.3902.3.6000.604.2.1.53.1.100
RowStatus
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

zxr10RMAPSetPathSelTable 4.4.1.3902.3.6000.604.2.1.54
Route-map Set Path-selection Table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Zxr10RMAPSetPathSelEntry

zxr10RMAPSetPathSelEntry 4.4.1.3902.3.6000.604.2.1.54.1
Set BGP path-selection
Status: current Access: not-accessible
OBJECT-TYPE    
  Zxr10RMAPSetPathSelEntry  

zxr10RMAPSetPathSelName 4.4.1.3902.3.6000.604.2.1.54.1.1
Name of Route-map (1-31 characters)
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(1..31)  

zxr10RMAPSetPathSelSequence 4.4.1.3902.3.6000.604.2.1.54.1.2
The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..65535  

zxr10RMAPSetPathSelPath 4.4.1.3902.3.6000.604.2.1.54.1.3
all Path for imitating iBGP full-mesh.Value is 1. backup Path for rapid convergence.Value is 2. best-path Path for load sharing.Value is 3. group-best Path for elimination of routing oscillation.Value is 4.
Status: current Access: read-create
OBJECT-TYPE    
  RmapSetPath  

zxr10RMAPSetPathSelNum 4.4.1.3902.3.6000.604.2.1.54.1.4
Path numbers. The range of config is 1 to 32.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 1..32  

zxr10RMAPSetPathSelInstall 4.4.1.3902.3.6000.604.2.1.54.1.5
Manner of sending to forwarding table.
Status: current Access: read-create
OBJECT-TYPE    
  RmapSetPathInstall  

zxr10RMAPSetPathSelMulpro 4.4.1.3902.3.6000.604.2.1.54.1.6
Manner of sending to forwarding table.
Status: current Access: read-create
OBJECT-TYPE    
  RmapSetPathMulpro  

zxr10RMAPSetPathSelAdvertise 4.4.1.3902.3.6000.604.2.1.54.1.7
Advertising the path selected outward.
Status: current Access: read-create
OBJECT-TYPE    
  RmapSetPathAdvertise  

zxr10RMAPSetPathSelRowStatus 4.4.1.3902.3.6000.604.2.1.54.1.100
RowStatus
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

zxr10RMAPSetPolicyPrioTable 4.4.1.3902.3.6000.604.2.1.55
Route-map Set Policy-priority Table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Zxr10RMAPSetPolicyPrioEntry

zxr10RMAPSetPolicyPrioEntry 4.4.1.3902.3.6000.604.2.1.55.1
Set policy priority for PBR
Status: current Access: not-accessible
OBJECT-TYPE    
  Zxr10RMAPSetPolicyPrioEntry  

zxr10RMAPSetPolicyPrioName 4.4.1.3902.3.6000.604.2.1.55.1.1
Name of Route-map (1-31 characters)
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(1..31)  

zxr10RMAPSetPolicyPrioSequence 4.4.1.3902.3.6000.604.2.1.55.1.2
The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..65535  

zxr10RMAPSetPolicyPrio 4.4.1.3902.3.6000.604.2.1.55.1.3
Value of policy priority. The range of config is 0 to 7.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..7  

zxr10RMAPSetPolicyPrioRowStatus 4.4.1.3902.3.6000.604.2.1.55.1.100
RowStatus
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

zxr10RMAPMatchIpAlgMetricTable 4.4.1.3902.3.6000.604.2.1.56
Route-map Match Ip Metric Table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Zxr10RMAPMatchIpAlgMetricEntry

zxr10RMAPMatchIpAlgMetricEntry 4.4.1.3902.3.6000.604.2.1.56.1
Match address of route or match packet. This match item sets the route-map with ipv4 type. It conflicts with other match or set items which set the route-map name with ipv6 type.
Status: current Access: not-accessible
OBJECT-TYPE    
  Zxr10RMAPMatchIpAlgMetricEntry  

zxr10RMAPMatchIpAlgMetricName 4.4.1.3902.3.6000.604.2.1.56.1.1
Name of Route-map (1-31 characters)
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(1..31)  

zxr10RMAPMatchIpAlgMetricSeq 4.4.1.3902.3.6000.604.2.1.56.1.2
The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..65535  

zxr10RMAPMatchIpAlgMetricAlg 4.4.1.3902.3.6000.604.2.1.56.1.3
eq Equal matric length to be matched.Value is 1. ge Minimum matric length to be matched.Value is 2. le Maximun matric length to be matched.Value is 3.
Status: current Access: read-create
OBJECT-TYPE    
  RmapMatchAlg  

zxr10RMAPMatchIpAlgMetric 4.4.1.3902.3.6000.604.2.1.56.1.4
Metric value. The range of config is 0 to 4294967295.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..4294967295  

zxr10RMAPIpAlgMetricRowStatus 4.4.1.3902.3.6000.604.2.1.56.1.100
RowStatus
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

zxr10RMAPMatchIpv6AlgMetricTable 4.4.1.3902.3.6000.604.2.1.57
Route-map Match Ipv6 Metric Table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Zxr10RMAPMatchIpv6AlgMetricEntry

zxr10RMAPMatchIpv6AlgMetricEntry 4.4.1.3902.3.6000.604.2.1.57.1
Match address of route or match packet. This match item sets the route-map with ipv6 type. It conflicts with other match or set items which set the route-map name with ipv4 type.
Status: current Access: not-accessible
OBJECT-TYPE    
  Zxr10RMAPMatchIpv6AlgMetricEntry  

zxr10RMAPMatchIpv6AlgMetricName 4.4.1.3902.3.6000.604.2.1.57.1.1
Name of Route-map (1-31 characters)
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(1..31)  

zxr10RMAPMatchIpv6AlgMetricSeq 4.4.1.3902.3.6000.604.2.1.57.1.2
The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..65535  

zxr10RMAPMatchIpv6AlgMetricAlg 4.4.1.3902.3.6000.604.2.1.57.1.3
eq Equal matric length to be matched.Value is 1. ge Minimum matric length to be matched.Value is 2. le Maximun matric length to be matched.Value is 3.
Status: current Access: read-create
OBJECT-TYPE    
  RmapMatchAlg  

zxr10RMAPMatchIpv6AlgMetric 4.4.1.3902.3.6000.604.2.1.57.1.4
Metric value. The range of config is 0 to 4294967295.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..4294967295  

zxr10RMAPIpv6AlgMetricRowStatus 4.4.1.3902.3.6000.604.2.1.57.1.100
RowStatus
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

zxr10RMAPSetTraffIdxTable 4.4.1.3902.3.6000.604.2.1.58
Route-map Set Traffic-index Table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Zxr10RMAPSetTraffIdxEntry

zxr10RMAPSetTraffIdxEntry 4.4.1.3902.3.6000.604.2.1.58.1
Set BGP traffic index
Status: current Access: not-accessible
OBJECT-TYPE    
  Zxr10RMAPSetTraffIdxEntry  

zxr10RMAPSetTraffIdxName 4.4.1.3902.3.6000.604.2.1.58.1.1
Name of Route-map (1-31 characters)
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(1..31)  

zxr10RMAPSetTraffIdxSequence 4.4.1.3902.3.6000.604.2.1.58.1.2
The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..65535  

zxr10RMAPSetTraffIdx 4.4.1.3902.3.6000.604.2.1.58.1.3
Traffic-index number. The range of config is 1 to 63.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 1..32  

zxr10RMAPSetTraffIdxRowStatus 4.4.1.3902.3.6000.604.2.1.58.1.100
RowStatus
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

zxr10RMAPSetNextHopPeerAddrTable 4.4.1.3902.3.6000.604.2.1.60
Route-map Set NextHop Table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Zxr10RMAPSetNextHopPeerAddrEntry

zxr10RMAPSetNextHopPeerAddrEntry 4.4.1.3902.3.6000.604.2.1.60.1
Set IP address of next hop. It conflicts with these set items below: set vrf set global
Status: current Access: not-accessible
OBJECT-TYPE    
  Zxr10RMAPSetNextHopPeerAddrEntry  

zxr10RMAPSetNextHopPeerAddrName 4.4.1.3902.3.6000.604.2.1.60.1.1
Name of Route-map (1-31 characters)
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(1..31)  

zxr10RMAPSetNextHopPeerAddrSeq 4.4.1.3902.3.6000.604.2.1.60.1.2
The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

zxr10RMAPSetNextHopAddr 4.4.1.3902.3.6000.604.2.1.60.1.3
IP address of next hop. 0 is invalid value. Each sequence has 10 set next-hop items at most.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpAddress  

zxr10RMAPSetNextHopPeerAddr 4.4.1.3902.3.6000.604.2.1.60.1.4
Peer address for BGP.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

zxr10RMAPSetNHorPeerAddRowStatus 4.4.1.3902.3.6000.604.2.1.60.1.100
RowStatus
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

zxr10RMAPSetIpv6NHorPeerAddTable 4.4.1.3902.3.6000.604.2.1.61
Route-map Set IpNextHop Table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Zxr10RMAPSetIpv6NHorPeerAddEntry

zxr10RMAPSetIpv6NHorPeerAddEntry 4.4.1.3902.3.6000.604.2.1.61.1
Set Next hop address. This set item sets the route-map name with ipv6 type. It conflicts with other match or set items which set the route-map name with ipv4 type. It conflicts with these set items below: set vrf set global
Status: current Access: not-accessible
OBJECT-TYPE    
  Zxr10RMAPSetIpv6NHorPeerAddEntry  

zxr10RMAPSetIpv6NHorPeerAddName 4.4.1.3902.3.6000.604.2.1.61.1.1
Name of Route-map (1-31 characters)
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(1..31)  

zxr10RMAPSetIpv6NHorPeerAddSeq 4.4.1.3902.3.6000.604.2.1.61.1.2
The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

zxr10RMAPSetIpv6NextHopAddr 4.4.1.3902.3.6000.604.2.1.61.1.3
IPv6 address of next hop. 0 is invalid value. Each sequence has 10 set ipv6 next-hop items at most.
Status: current Access: not-accessible
OBJECT-TYPE    
  Ipv6Address  

zxr10RMAPSetIpv6NextHopPeerAddr 4.4.1.3902.3.6000.604.2.1.61.1.4
Peer address for BGP.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

zxr10RMAPSetv6NHorPeerRowStatus 4.4.1.3902.3.6000.604.2.1.61.1.100
RowStatus
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

zxr10RMAPMatchEvpnTable 4.4.1.3902.3.6000.604.2.1.62
Route-map match EVPN table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Zxr10RMAPMatchEvpnEntry

zxr10RMAPMatchEvpnEntry 4.4.1.3902.3.6000.604.2.1.62.1
Match BGP EVPN route
Status: current Access: not-accessible
OBJECT-TYPE    
  Zxr10RMAPMatchEvpnEntry  

zxr10RMAPMatchEvpnName 4.4.1.3902.3.6000.604.2.1.62.1.1
Name of route-map (1-31 characters)
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(1..31)  

zxr10RMAPMatchEvpnSequence 4.4.1.3902.3.6000.604.2.1.62.1.2
The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..65535  

zxr10RMAPMatchEvpn 4.4.1.3902.3.6000.604.2.1.62.1.3
EVPN route type. 1: Ethernet Auto-Discovery (A-D) route; 2: MAC/IP Advertisement route; 3: Inclusive Multicast Ethernet Tag route; 4: Ethernet Segment route; 5: IP Prefix route.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..5  

zxr10RMAPMatchEvpnRowStatus 4.4.1.3902.3.6000.604.2.1.62.1.100
Row status
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

zxr10RMAPBlackHoleRouteTable 4.4.1.3902.3.6000.604.2.1.63
Route-map black hole route table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Zxr10RMAPBlackHoleRouteEntry

zxr10RMAPBlackHoleRouteEntry 4.4.1.3902.3.6000.604.2.1.63.1
Black hole route which outcoming interface is null.
Status: current Access: not-accessible
OBJECT-TYPE    
  Zxr10RMAPBlackHoleRouteEntry  

zxr10RMAPBlackHoleRouteName 4.4.1.3902.3.6000.604.2.1.63.1.1
Name of route-map (1-31 characters)
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(1..31)  

zxr10RMAPBlackHoleRouteSequence 4.4.1.3902.3.6000.604.2.1.63.1.2
The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..65535  

zxr10RMAPBlackHoleRouteEnable 4.4.1.3902.3.6000.604.2.1.63.1.3
Black hole route enable.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER false(255), true(1)  

zxr10RMAPBlackHoleRouteRowStatus 4.4.1.3902.3.6000.604.2.1.63.1.100
Row status
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

zxr10RMAPDefaultRouteTable 4.4.1.3902.3.6000.604.2.1.64
Route-map default route table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Zxr10RMAPDefaultRouteEntry

zxr10RMAPDefaultRouteEntry 4.4.1.3902.3.6000.604.2.1.64.1
Default route
Status: current Access: not-accessible
OBJECT-TYPE    
  Zxr10RMAPDefaultRouteEntry  

zxr10RMAPDefaultRouteName 4.4.1.3902.3.6000.604.2.1.64.1.1
Name of route-map (1-31 characters)
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(1..31)  

zxr10RMAPDefaultRouteSequence 4.4.1.3902.3.6000.604.2.1.64.1.2
The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..65535  

zxr10RMAPDefaultRouteEnable 4.4.1.3902.3.6000.604.2.1.64.1.3
Default route enable.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER false(255), true(1)  

zxr10RMAPDefaultRouteRowStatus 4.4.1.3902.3.6000.604.2.1.64.1.100
Row status
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

zxr10RMAPStrictPolicyTable 4.4.1.3902.3.6000.604.2.1.65
Route-map strict policy table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Zxr10RMAPStrictPolicyEntry

zxr10RMAPStrictPolicyEntry 4.4.1.3902.3.6000.604.2.1.65.1
Strict policy
Status: current Access: not-accessible
OBJECT-TYPE    
  Zxr10RMAPStrictPolicyEntry  

zxr10RMAPStrictPolicyName 4.4.1.3902.3.6000.604.2.1.65.1.1
Name of route-map (1-31 characters)
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(1..31)  

zxr10RMAPStrictPolicySequence 4.4.1.3902.3.6000.604.2.1.65.1.2
The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..65535  

zxr10RMAPStrictPolicyEnable 4.4.1.3902.3.6000.604.2.1.65.1.3
Strict policy enable.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER false(255), true(1)  

zxr10RMAPStrictPolicyRowStatus 4.4.1.3902.3.6000.604.2.1.65.1.100
Row status
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

zxr10RMAPSetPathListTable 4.4.1.3902.3.6000.604.2.1.66
Route-map set IPv4 path list table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Zxr10RMAPSetPathListEntry

zxr10RMAPSetPathListEntry 4.4.1.3902.3.6000.604.2.1.66.1
Set output interfaces. This set item supports these types of interface: [PORT-CLASS-FEI,PORT-CLASS-GEI-END]. This set item sets the route-map name with IPv4 type. It conflicts with other match or set items which set the route-map name with IPv6 type and zxr10RMAPSetIpPathListTable. It conflicts with these set items below: set vrf set global
Status: current Access: not-accessible
OBJECT-TYPE    
  Zxr10RMAPSetPathListEntry  

zxr10RMAPSetPathListName 4.4.1.3902.3.6000.604.2.1.66.1.1
Name of route-map (1-31 characters)
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(1..31)  

zxr10RMAPSetPathListSequence 4.4.1.3902.3.6000.604.2.1.66.1.2
The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

zxr10RMAPSetPathListIntf 4.4.1.3902.3.6000.604.2.1.66.1.3
Name of interface (1-31 characters)
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(1..31)  

zxr10RMAPSetPathListNextHop 4.4.1.3902.3.6000.604.2.1.66.1.4
IP address of next hop.0 is invalid value.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpAddress  

zxr10RMAPSetPathListRowStatus 4.4.1.3902.3.6000.604.2.1.66.1.100
Row status
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

zxr10RMAPSetPathList6Table 4.4.1.3902.3.6000.604.2.1.67
Route-map set Ipv6 path list table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Zxr10RMAPSetPathList6Entry

zxr10RMAPSetPathList6Entry 4.4.1.3902.3.6000.604.2.1.67.1
Set output interface. This set item supports these types of interface: [PORT-CLASS-FEI,PORT-CLASS-GEI-END]. This set item sets the route-map name with ipv6 type. It conflicts with other match or set items which set the route-map name with ipv4 type and zxr10RMAPSetIpv6PathTable. It conflicts with these set items below: set vrf set global
Status: current Access: not-accessible
OBJECT-TYPE    
  Zxr10RMAPSetPathList6Entry  

zxr10RMAPSetPathList6Name 4.4.1.3902.3.6000.604.2.1.67.1.1
Name of route-map (1-31 characters)
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(1..31)  

zxr10RMAPSetPathList6Sequence 4.4.1.3902.3.6000.604.2.1.67.1.2
The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

zxr10RMAPSetPathList6Intf 4.4.1.3902.3.6000.604.2.1.67.1.3
Name of interface (1-31 characters)
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(1..31)  

zxr10RMAPSetPathList6NextHop 4.4.1.3902.3.6000.604.2.1.67.1.4
IPv6 address of next hop.0 is invalid value.
Status: current Access: not-accessible
OBJECT-TYPE    
  Ipv6Address  

zxr10RMAPSetPathList6RowStatus 4.4.1.3902.3.6000.604.2.1.67.1.100
Row status
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

zxr10RMAPSetVxlanTunnelSrcTable 4.4.1.3902.3.6000.604.2.1.68
Route-map set VXLAN tunnel source table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Zxr10RMAPSetVxlanTunnelSrcEntry

zxr10RMAPSetVxlanTunnelSrcEntry 4.4.1.3902.3.6000.604.2.1.68.1
Route-map set VXLAN tunnel source entry
Status: current Access: not-accessible
OBJECT-TYPE    
  Zxr10RMAPSetVxlanTunnelSrcEntry  

zxr10RMAPSetVxlanTunnelSrcName 4.4.1.3902.3.6000.604.2.1.68.1.1
Name of route-map (1-31 characters)
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(1..31)  

zxr10RMAPSetVxlanTunnelSrcSeq 4.4.1.3902.3.6000.604.2.1.68.1.2
The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..65535  

zxr10RMAPSetVxlanTunnelSrcAddr 4.4.1.3902.3.6000.604.2.1.68.1.3
IP address of VXLAN tunnel source.
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

zxr10RMAPVxlanTunnelSrcRowStatus 4.4.1.3902.3.6000.604.2.1.68.1.100
Row status
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

zxr10RMAPSetEvpnMacIntfTable 4.4.1.3902.3.6000.604.2.1.69
Route-map set EVPN router's MAC interface table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Zxr10RMAPSetEvpnMacIntfEntry

zxr10RMAPSetEvpnMacIntfEntry 4.4.1.3902.3.6000.604.2.1.69.1
Route-map set EVPN router's MAC interface entry
Status: current Access: not-accessible
OBJECT-TYPE    
  Zxr10RMAPSetEvpnMacIntfEntry  

zxr10RMAPSetEvpnMacIntfName 4.4.1.3902.3.6000.604.2.1.69.1.1
Name of route-map (1-31 characters)
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(1..31)  

zxr10RMAPSetEvpnMacIntfSequence 4.4.1.3902.3.6000.604.2.1.69.1.2
The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..65535  

zxr10RMAPSetEvpnMacIntf 4.4.1.3902.3.6000.604.2.1.69.1.3
Name of interface (1-31 characters)
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(1..31)  

zxr10RMAPSetEvpnMacIntfRowStatus 4.4.1.3902.3.6000.604.2.1.69.1.100
Row status
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

zxr10RMAPSetL2vniLabelTable 4.4.1.3902.3.6000.604.2.1.70
Route-map set l2-vni label table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Zxr10RMAPSetL2vniLabelEntry

zxr10RMAPSetL2vniLabelEntry 4.4.1.3902.3.6000.604.2.1.70.1
Route-map set l2-vni label entry
Status: current Access: not-accessible
OBJECT-TYPE    
  Zxr10RMAPSetL2vniLabelEntry  

zxr10RMAPSetL2vniLabelName 4.4.1.3902.3.6000.604.2.1.70.1.1
Name of route-map (1-31 characters)
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(1..31)  

zxr10RMAPSetL2vniLabelSequence 4.4.1.3902.3.6000.604.2.1.70.1.2
The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..65535  

zxr10RMAPSetL2vniLabel 4.4.1.3902.3.6000.604.2.1.70.1.3
The value of l2-vni label.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 1..16777215  

zxr10RMAPSetL2vniLabelRowStatus 4.4.1.3902.3.6000.604.2.1.70.1.100
Row status
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

zxr10RMAPSetL3vniLabelTable 4.4.1.3902.3.6000.604.2.1.71
Route-map set l3-vni label table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Zxr10RMAPSetL3vniLabelEntry

zxr10RMAPSetL3vniLabelEntry 4.4.1.3902.3.6000.604.2.1.71.1
Route-map set l3-vni label entry
Status: current Access: not-accessible
OBJECT-TYPE    
  Zxr10RMAPSetL3vniLabelEntry  

zxr10RMAPSetL3vniLabelName 4.4.1.3902.3.6000.604.2.1.71.1.1
Name of route-map (1-31 characters)
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(1..31)  

zxr10RMAPSetL3vniLabelSequence 4.4.1.3902.3.6000.604.2.1.71.1.2
The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..65535  

zxr10RMAPSetL3vniLabel 4.4.1.3902.3.6000.604.2.1.71.1.3
The value of l3-vni label.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 1..16777215  

zxr10RMAPSetL3vniLabelRowStatus 4.4.1.3902.3.6000.604.2.1.71.1.100
Row status
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

zxr10RMAPMatchL3VniLabelTable 4.4.1.3902.3.6000.604.2.1.72
Route-map match l3-vni label table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Zxr10RMAPMatchL3VniLabelEntry

zxr10RMAPMatchL3VniLabelEntry 4.4.1.3902.3.6000.604.2.1.72.1
Route-map match l3-vni label entry
Status: current Access: not-accessible
OBJECT-TYPE    
  Zxr10RMAPMatchL3VniLabelEntry  

zxr10RMAPMatchL3VniLabelName 4.4.1.3902.3.6000.604.2.1.72.1.1
Name of route-map (1-31 characters)
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(1..31)  

zxr10RMAPMatchL3VniLabelSequence 4.4.1.3902.3.6000.604.2.1.72.1.2
The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..65535  

zxr10RMAPMatchL3VniLabel 4.4.1.3902.3.6000.604.2.1.72.1.3
The value of l3-vni label.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 1..16777215  

zxr10RMAPMatchL3VniLabelStatus 4.4.1.3902.3.6000.604.2.1.72.1.100
Row status
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

zxr10RMAPMatchL2VniLabelTable 4.4.1.3902.3.6000.604.2.1.73
Route-map match l2-vni label table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Zxr10RMAPMatchL2VniLabelEntry

zxr10RMAPMatchL2VniLabelEntry 4.4.1.3902.3.6000.604.2.1.73.1
Route-map match l2-vni label entry
Status: current Access: not-accessible
OBJECT-TYPE    
  Zxr10RMAPMatchL2VniLabelEntry  

zxr10RMAPMatchL2VniLabelName 4.4.1.3902.3.6000.604.2.1.73.1.1
Name of route-map (1-31 characters)
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(1..31)  

zxr10RMAPMatchL2VniLabelSequence 4.4.1.3902.3.6000.604.2.1.73.1.2
The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..65535  

zxr10RMAPMatchL2VniLabel 4.4.1.3902.3.6000.604.2.1.73.1.3
The value of l2-vni label.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 1..16777215  

zxr10RMAPMatchL2VniLabelStatus 4.4.1.3902.3.6000.604.2.1.73.1.100
Row status
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

zxr10RMAPMatchPlyRtIdTable 4.4.1.3902.3.6000.604.2.1.74
Route-map match policy-route-id table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Zxr10RMAPMatchPlyRtIdEntry

zxr10RMAPMatchPlyRtIdEntry 4.4.1.3902.3.6000.604.2.1.74.1
Route-map match policy-route-id entry
Status: current Access: not-accessible
OBJECT-TYPE    
  Zxr10RMAPMatchPlyRtIdEntry  

zxr10RMAPMatchPlyRtIdName 4.4.1.3902.3.6000.604.2.1.74.1.1
Name of route-map (1-31 characters)
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(1..31)  

zxr10RMAPMatchPlyRtIdSequence 4.4.1.3902.3.6000.604.2.1.74.1.2
The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..65535  

zxr10RMAPMatchPlyRtId 4.4.1.3902.3.6000.604.2.1.74.1.3
The value of policy-route-id.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..63  

zxr10RMAPMatchPlyRtIdDeriction 4.4.1.3902.3.6000.604.2.1.74.1.4
The deriction of policy-route-id.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER distination(1), source(2)  

zxr10RMAPMatchPlyRtIdStatus 4.4.1.3902.3.6000.604.2.1.74.1.100
Row status
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

zxr10RMAPMatchIpv6PlyRtIdTable 4.4.1.3902.3.6000.604.2.1.75
Route-map match ipv6 policy-route-id table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Zxr10RMAPMatchIpv6PlyRtIdEntry

zxr10RMAPMatchIpv6PlyRtIdEntry 4.4.1.3902.3.6000.604.2.1.75.1
Route-map match ipv6 policy-route-id entry
Status: current Access: not-accessible
OBJECT-TYPE    
  Zxr10RMAPMatchIpv6PlyRtIdEntry  

zxr10RMAPMatchIpv6PlyRtIdName 4.4.1.3902.3.6000.604.2.1.75.1.1
Name of route-map (1-31 characters)
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(1..31)  

zxr10RMAPMatchIpv6PlyRtIdSeq 4.4.1.3902.3.6000.604.2.1.75.1.2
The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..65535  

zxr10RMAPMatchIpv6PlyRtId 4.4.1.3902.3.6000.604.2.1.75.1.3
The value of policy-route-id.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..63  

zxr10RMAPMatchIpv6PlyRtIdDerict 4.4.1.3902.3.6000.604.2.1.75.1.4
The deriction of policy-route-id.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER distination(1), source(2)  

zxr10RMAPMatchIpv6PlyRtIdStatus 4.4.1.3902.3.6000.604.2.1.75.1.100
Row status
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

zxr10RMAPSetPlyRtIdTable 4.4.1.3902.3.6000.604.2.1.76
Route-map set policy-route-id table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Zxr10RMAPSetPlyRtIdEntry

zxr10RMAPSetPlyRtIdEntry 4.4.1.3902.3.6000.604.2.1.76.1
Route-map set policy-route-id entry
Status: current Access: not-accessible
OBJECT-TYPE    
  Zxr10RMAPSetPlyRtIdEntry  

zxr10RMAPSetPlyRtIdName 4.4.1.3902.3.6000.604.2.1.76.1.1
Name of route-map (1-31 characters)
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(1..31)  

zxr10RMAPSetPlyRtIdSequence 4.4.1.3902.3.6000.604.2.1.76.1.2
The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..65535  

zxr10RMAPSetPlyRtId 4.4.1.3902.3.6000.604.2.1.76.1.3
The value of policy-route-id.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 1..63  

zxr10RMAPSetPlyRtIdStatus 4.4.1.3902.3.6000.604.2.1.76.1.100
Row status
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

zxr10RMAPSetMonitorGroupIdTable 4.4.1.3902.3.6000.604.2.1.77
Route-map set monitor-group-id table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Zxr10RMAPSetMonitorGroupIdEntry

zxr10RMAPSetMonitorGroupIdEntry 4.4.1.3902.3.6000.604.2.1.77.1
Route-map set monitor-group-id entry
Status: current Access: not-accessible
OBJECT-TYPE    
  Zxr10RMAPSetMonitorGroupIdEntry  

zxr10RMAPSetMonitorGroupIdName 4.4.1.3902.3.6000.604.2.1.77.1.1
Name of route-map (1-31 characters)
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(1..31)  

zxr10RMAPSetMonitorGroupIdSeq 4.4.1.3902.3.6000.604.2.1.77.1.2
The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..65535  

zxr10RMAPSetMonitorGroupId 4.4.1.3902.3.6000.604.2.1.77.1.3
The value of policy-route-id.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 1..63  

zxr10RMAPSetMonitorGroupIdStatus 4.4.1.3902.3.6000.604.2.1.77.1.100
Row status
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

zxr10RMAPLoadShareTable 4.4.1.3902.3.6000.604.2.1.78
Route-map load share table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Zxr10RMAPLoadShareEntry

zxr10RMAPLoadShareEntry 4.4.1.3902.3.6000.604.2.1.78.1
Load share
Status: current Access: not-accessible
OBJECT-TYPE    
  Zxr10RMAPLoadShareEntry  

zxr10RMAPLoadShareName 4.4.1.3902.3.6000.604.2.1.78.1.1
Name of route-map (1-31 characters)
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(1..31)  

zxr10RMAPLoadShareSequence 4.4.1.3902.3.6000.604.2.1.78.1.2
The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..65535  

zxr10RMAPLoadShareEnable 4.4.1.3902.3.6000.604.2.1.78.1.3
Load share enable.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..1  

zxr10RMAPLoadShareStatus 4.4.1.3902.3.6000.604.2.1.78.1.100
Row status
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

zxr10RMAPContinueTable 4.4.1.3902.3.6000.604.2.1.79
Route-map continue table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Zxr10RMAPContinueEntry

zxr10RMAPContinueEntry 4.4.1.3902.3.6000.604.2.1.79.1
Route-map continue entry
Status: current Access: not-accessible
OBJECT-TYPE    
  Zxr10RMAPContinueEntry  

zxr10RMAPContinueName 4.4.1.3902.3.6000.604.2.1.79.1.1
Name of route-map (1-31 characters)
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(1..31)  

zxr10RMAPContinueSequence 4.4.1.3902.3.6000.604.2.1.79.1.2
The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..65535  

zxr10RMAPContinue 4.4.1.3902.3.6000.604.2.1.79.1.3
The value of continue sequence.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..65535  

zxr10RMAPContinueNext 4.4.1.3902.3.6000.604.2.1.79.1.4
Continue next.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..1  

zxr10RMAPContinueStatus 4.4.1.3902.3.6000.604.2.1.79.1.100
Row status
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

zxr10RMAPTimeRangeTable 4.4.1.3902.3.6000.604.2.1.80
Route-map Match IpNextHop Table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Zxr10RMAPTimeRangeEntry

zxr10RMAPTimeRangeEntry 4.4.1.3902.3.6000.604.2.1.80.1
Route-map time range.
Status: current Access: not-accessible
OBJECT-TYPE    
  Zxr10RMAPTimeRangeEntry  

zxr10RMAPTimeRangeName 4.4.1.3902.3.6000.604.2.1.80.1.1
Name of Route-map (1-31 characters)
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(1..31)  

zxr10RMAPTimeRangeSequence 4.4.1.3902.3.6000.604.2.1.80.1.2
The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

zxr10RMAPTimeRange 4.4.1.3902.3.6000.604.2.1.80.1.3
Name of time range(1-31 characters).
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(1..31)  

zxr10RMAPTimeRangeStatus 4.4.1.3902.3.6000.604.2.1.80.1.100
RowStatus
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

zxr10RMAPSetCommunityNameTable 4.4.1.3902.3.6000.604.2.1.81
Route-map Set Community Table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Zxr10RMAPSetCommunityNameEntry

zxr10RMAPSetCommunityNameEntry 4.4.1.3902.3.6000.604.2.1.81.1
Set BGP community name.
Status: current Access: not-accessible
OBJECT-TYPE    
  Zxr10RMAPSetCommunityNameEntry  

zxr10RMAPSetCommunityName 4.4.1.3902.3.6000.604.2.1.81.1.1
Name of Route-map (1-31 characters)
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(1..31)  

zxr10RMAPSetCommunitySequence 4.4.1.3902.3.6000.604.2.1.81.1.2
The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

zxr10RMAPSetCommunityIsAddtive 4.4.1.3902.3.6000.604.2.1.81.1.3
additive Add to the existing community. Value is 5.
Status: current Access: not-accessible
OBJECT-TYPE    
  RmapSetComm  

zxr10RMAPSetCommunityListName 4.4.1.3902.3.6000.604.2.1.81.1.4
Community list name (1-31 characters)
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(1..31)  

zxr10RMAPSetCommunityRowStatus 4.4.1.3902.3.6000.604.2.1.81.1.100
RowStatus
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor