ZXR10-MPLS-TE-MIB

File: ZXR10-MPLS-TE-MIB.mib (112176 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC ZXR10-SMI

Imported symbols

MODULE-IDENTITY OBJECT-TYPE NOTIFICATION-TYPE
IpAddress Integer32 Unsigned32
TimeTicks Counter32 Counter64
DisplayString RowStatus StorageType
TimeStamp zxr10MplsTe

Defined Types

Zxr10MplsTunnelEntry  
SEQUENCE    
  zxr10MplsTunnelIndex Unsigned32
  zxr10MplsTunnelInstance Unsigned32
  zxr10MplsTunnelIngressLSRId IpAddress
  zxr10MplsTunnelEgressLSRId IpAddress
  zxr10MplsTunnelOutLabel Unsigned32
  zxr10MplsTunnelOutIntf DisplayString
  zxr10MplsTunnelName DisplayString
  zxr10MplsTunnelDescr DisplayString
  zxr10MplsTunnelIsIf INTEGER
  zxr10MplsTunnelIfIndex Unsigned32
  zxr10MplsTunnelIfType INTEGER
  zxr10MplsTunnelIfAddrOrName DisplayString
  zxr10MplsTunnelIfMaskOrIndex DisplayString
  zxr10MplsTunnelOwner INTEGER
  zxr10MplsTunnelRole INTEGER
  zxr10MplsTunnelSignallingProto INTEGER
  zxr10MplsTunnelSetupPrio Integer32
  zxr10MplsTunnelHoldingPrio Integer32
  zxr10MplsTunnelSessionAttributes DisplayString
  zxr10MplsTunnelFrrEnable INTEGER
  zxr10MplsTunnelResourcePointer Unsigned32
  zxr10MplsTunnelPrimaryInstance Unsigned32
  zxr10MplsTunnelInstancePriority Unsigned32
  zxr10MplsTunnelHopTableIndex Unsigned32
  zxr10MplsTunnelPathInUse Unsigned32
  zxr10MplsTunnelARHopTableIndex Unsigned32
  zxr10MplsTunnelCHopTableIndex Unsigned32
  zxr10MplsTunnelTotalUpTime TimeTicks
  zxr10MplsTunnelInstanceUpTime TimeTicks
  zxr10MplsTunnelPrimaryUpTime TimeTicks
  zxr10MplsTunnelPathChanges Counter32
  zxr10MplsTunnelLastPathChange TimeTicks
  zxr10MplsTunnelCreationTime TimeStamp
  zxr10MplsTunnelStateTransitions Counter32
  zxr10MplsTunnelAdminStatus INTEGER
  zxr10MplsTunnelOperStatus INTEGER
  zxr10MplsTunnelRowStatus RowStatus
  zxr10MplsTunnelStorageType StorageType
  zxr10MplsTunnelAutorouteEnable INTEGER
  zxr10MplsTunnelAutorouteMetricType INTEGER
  zxr10MplsTunnelAutorouteMetricRelativeValue Integer32
  zxr10MplsTunnelAutorouteMetricAbsoluteValue Unsigned32
  zxr10MplsTunnelRecordRouteEnable INTEGER
  zxr10MplsTunnelCACStatus INTEGER
  zxr10MplsTunnelLspOctets Counter64
  zxr10MplsTunnelLspPackets Counter64
  zxr10MplsTunnelLspLastTransition TimeStamp
  zxr10MplsTunnelLspConfiguredPaths Integer32
  zxr10MplsTunnelPathType INTEGER
  zxr10MplsTunnelPathExplicitRoute OCTET STRING
  zxr10MplsTunnelPathRecordRoute OCTET STRING
  zxr10MplsTunnelPathCOS INTEGER
  zxr10MplsTunnelPathInclude Integer32
  zxr10MplsTunnelPathExclude Integer32
  zxr10MplsTunnelHotStandbyEnable INTEGER
  zxr10MplsTunnelHotStandbyPrimaryPathOption Unsigned32
  zxr10MplsTunnelHotStandbySecondaryPathOption Unsigned32
  zxr10MplsTunnelHotStandbyInstance Integer32
  zxr10MplsTunnelHotStandbyState INTEGER
  zxr10MplsTunnelBfdEnable INTEGER
  zxr10MplsTunnelBFDmult Unsigned32
  zxr10MplsTunnelBFDminTxInterval Unsigned32
  zxr10MplsTunnelBFDminRxInterval Unsigned32
  zxr10MplsTunnelBFDstatus INTEGER
  zxr10MplsTunnelFrrProtectionMethod INTEGER
  zxr10MplsTunnelBandwidth Unsigned32
  zxr10MplsTunnelSubPoolBandwidth Unsigned32
  zxr10MplsTunnelIgpMetric Unsigned32
  zxr10MplsTunnelTeMetric Unsigned32
  zxr10MplsTunnelBFDSlaveStatus INTEGER
  zxr10MplsTunnelAssociateStatus INTEGER

Zxr10MplsRemoteTunnelEntry  
SEQUENCE    
  zxr10MplsRemoteTunnelIndex Unsigned32
  zxr10MplsRemoteTunnelInstance Unsigned32
  zxr10MplsRemoteTunnelIngressLSRId IpAddress
  zxr10MplsRemoteTunnelEgressLSRId IpAddress
  zxr10MplsRemoteTunnelInLabel Unsigned32
  zxr10MplsRemoteTunnelOutLabel Unsigned32
  zxr10MplsRemoteTunnelInIntf DisplayString
  zxr10MplsRemoteTunnelOutIntf DisplayString
  zxr10MplsRemoteTunnelName DisplayString
  zxr10MplsRemoteTunnelIsIf INTEGER
  zxr10MplsRemoteTunnelOwner INTEGER
  zxr10MplsRemoteTunnelRole INTEGER
  zxr10MplsRemoteTunnelSignallingProto INTEGER
  zxr10MplsRemoteTunnelSetupPrio Integer32
  zxr10MplsRemoteTunnelHoldingPrio Integer32
  zxr10MplsRemoteTunnelSessionAttributes DisplayString
  zxr10MplsRemoteTunnelLocalProtectInUse INTEGER
  zxr10MplsRemoteTunnelPrimaryInstance Unsigned32
  zxr10MplsRemoteTunnelInstancePriority Unsigned32
  zxr10MplsRemoteTunnelTotalUpTime TimeTicks
  zxr10MplsRemoteTunnelInstanceUpTime TimeTicks
  zxr10MplsRemoteTunnelPrimaryUpTime TimeTicks
  zxr10MplsRemoteTunnelCreationTime TimeStamp
  zxr10MplsRemoteTunnelAdminStatus INTEGER
  zxr10MplsRemoteTunnelOperStatus INTEGER
  zxr10MplsRemoteTunnelRowStatus RowStatus
  zxr10MplsRemoteTunnelStorageType StorageType
  zxr10MplsRemoteTunnelPathExplicitRoute OCTET STRING
  zxr10MplsRemoteTunnelPathRecordRoute OCTET STRING
  zxr10MplsRemoteTunnelFrrProtectionMethod INTEGER
  zxr10MplsRemoteTunnelARHopTableIndex Unsigned32
  zxr10MplsRemoteTunnelLspInOctets Counter64
  zxr10MplsRemoteTunnelLspInPackets Counter64

Zxr10MplsTunnelHopEntry  
SEQUENCE    
  zxr10MplsTunnelHopListIndex Unsigned32
  zxr10MplsTunnelHopPathOptionIndex Unsigned32
  zxr10MplsTunnelHopIndex Unsigned32
  zxr10MplsTunnelHopAddrType INTEGER
  zxr10MplsTunnelHopIpAddr IpAddress
  zxr10MplsTunnelHopIpPrefixLen Unsigned32
  zxr10MplsTunnelHopAsNumber Unsigned32
  zxr10MplsTunnelHopAddrUnnum Unsigned32
  zxr10MplsTunnelHopLspId Unsigned32
  zxr10MplsTunnelHopType INTEGER
  zxr10MplsTunnelHopInclude INTEGER
  zxr10MplsTunnelHopPathOptionName DisplayString
  zxr10MplsTunnelHopEntryPathComp INTEGER
  zxr10MplsTunnelHopRowStatus RowStatus
  zxr10MplsTunnelHopStorageType StorageType

Zxr10MplsTunnelResourceEntry  
SEQUENCE    
  zxr10MplsTunnelResourceIndex Unsigned32
  zxr10MplsTunnelResourceMaxRate Unsigned32
  zxr10MplsTunnelResourceMeanRate Unsigned32
  zxr10MplsTunnelResourceMaxBurstSize Unsigned32
  zxr10MplsTunnelResourceMeanBurstSize Unsigned32
  zxr10MplsTunnelResourceRowStatus RowStatus
  zxr10MplsTunnelResourceStorageType StorageType

Zxr10MplsTunnelCHopEntry  
SEQUENCE    
  zxr10MplsTunnelCHopListIndex Unsigned32
  zxr10MplsTunnelCHopIndex Unsigned32
  zxr10MplsTunnelCHopAddrType INTEGER
  zxr10MplsTunnelCHopIpAddr IpAddress
  zxr10MplsTunnelCHopIpPrefixLen Unsigned32
  zxr10MplsTunnelCHopAsNumber Unsigned32
  zxr10MplsTunnelCHopAddrUnnum Unsigned32
  zxr10MplsTunnelCHopLspId Unsigned32
  zxr10MplsTunnelCHopType INTEGER

Zxr10MplsTunnelARHopEntry  
SEQUENCE    
  zxr10MplsTunnelARHopListIndex Unsigned32
  zxr10MplsTunnelARHopIndex Unsigned32
  zxr10MplsTunnelARHopAddrType INTEGER
  zxr10MplsTunnelARHopIpAddr IpAddress
  zxr10MplsTunnelARHopAddrUnnum Unsigned32
  zxr10MplsTunnelARHopLspId Unsigned32

Zxr10MplsInterfaceEntry  
SEQUENCE    
  zxr10MplsInterfaceIndex Unsigned32
  zxr10MplsInterfaceName DisplayString
  zxr10MplsInterfaceIpAddr IpAddress
  zxr10MplsInterfaceMask IpAddress
  zxr10MplsInterfaceBfdEnable INTEGER
  zxr10MplsInterfaceAuthEnable INTEGER
  zxr10MplsInterfaceAuthChallengeEnable INTEGER
  zxr10MplsInterfaceAuthChallengeImpEnable INTEGER
  zxr10MplsInterfaceAuthLifeTime Unsigned32
  zxr10MplsInterfaceAuthKey DisplayString
  zxr10MplsInterfaceAuthType INTEGER
  zxr10MplsInterfaceAuthWinSize INTEGER
  zxr10MplsInterfaceTotalBandwidth Unsigned32
  zxr10MplsInterfaceAvailableBandwidth Unsigned32
  zxr10MplsInterfaceMetric DisplayString
  zxr10MplsInterfaceAutobakTunnelEnable INTEGER
  zxr10MplsInterfaceAutobakTunnelNhoponly INTEGER
  zxr10MplsInterfaceSrlgs DisplayString
  zxr10MplsInterfaceAttributeFlags INTEGER

Zxr10MplsIpExplicitEntry  
SEQUENCE    
  zxr10MplsIpExplicitNameType INTEGER
  zxr10MplsIpExplicitName DisplayString
  zxr10MplsIpExplicitType DisplayString
  zxr10MplsIpExplicitNextIpAddr DisplayString
  zxr10MplsIpExplicitIndex DisplayString

Zxr10MplsPathOptEntry  
SEQUENCE    
  zxr10MplsPathOptIndex Unsigned32
  zxr10MplsPathOptValue Unsigned32
  zxr10MplsPathOptType INTEGER
  zxr10MplsPathOptName DisplayString
  zxr10MplsPathOptHotStandbyType INTEGER
  zxr10MplsPathOptHotStandbyBackupPathName DisplayString

Zxr10MplsAdminGroupListEntry  
SEQUENCE    
  zxr10MplsAdminGroupNumber Unsigned32
  zxr10MplsAdminGroupName DisplayString

Zxr10MplsHotStandbyLspEntry  
SEQUENCE    
  zxr10MplsHotTunnelIndex Unsigned32
  zxr10MplsHotTunnelInstance Unsigned32
  zxr10MplsHotTunnelIngressLSRId IpAddress
  zxr10MplsHotTunnelEgressLSRId IpAddress
  zxr10MplsHotTunnelOutLabel Unsigned32
  zxr10MplsHotTunnelOutIntf DisplayString
  zxr10MplsHotTunnelRole INTEGER
  zxr10MplsHotTunnelSessionAttributes DisplayString
  zxr10MplsHotTunnelResourcePointer Unsigned32
  zxr10MplsHotTunnelInstancePriority Unsigned32
  zxr10MplsHotTunnelHopTableIndex Unsigned32
  zxr10MplsHotTunnelPathInUse INTEGER
  zxr10MplsHotTunnelARHopTableIndex Unsigned32
  zxr10MplsHotTunnelCHopTableIndex Unsigned32
  zxr10MplsHotTunnelInstanceUpTime TimeTicks
  zxr10MplsHotTunnelOperStatus INTEGER
  zxr10MplsHotTunnelRowStatus RowStatus

Defined Values

zxr10MplsTeMIB 1.3.6.1.4.1.3902.3.315.1
Copyright (C) The Internet Society (2004). The initial version of this MIB module was published in RFC 3812. For full legal notices see the RFC itself or see: http://www.ietf.org/copyrights/ianamib.html This MIB module contains managed object definitions for MPLS Traffic Engineering (TE) as defined in: 1. Extensions to RSVP for LSP Tunnels, Awduche et al, RFC 3209, December 20012. Constraint-Based LSP Setup using LDP, Jamoussi (Editor), RFC 3212, January 2002 3. Requirements for Traffic Engineering Over MPLS, Awduche, D., Malcolm, J., Agogbua, J., O Dell, M., and J. McManus, [RFC2702], September 1999
MODULE-IDENTITY    

zxr10MplsTeNotifications 1.3.6.1.4.1.3902.3.315.1.0
OBJECT IDENTIFIER    

zxr10MplsTeScalars 1.3.6.1.4.1.3902.3.315.1.1
OBJECT IDENTIFIER    

zxr10MplsTeTunnelObjects 1.3.6.1.4.1.3902.3.315.1.2
OBJECT IDENTIFIER    

zxr10MplsTeRemoteTunnelObjects 1.3.6.1.4.1.3902.3.315.1.3
OBJECT IDENTIFIER    

zxr10MplsTeHopObjects 1.3.6.1.4.1.3902.3.315.1.4
OBJECT IDENTIFIER    

zxr10MplsTeResourceObjects 1.3.6.1.4.1.3902.3.315.1.5
OBJECT IDENTIFIER    

zxr10MplsTeCHopObjects 1.3.6.1.4.1.3902.3.315.1.6
OBJECT IDENTIFIER    

zxr10MplsTeARHopObjects 1.3.6.1.4.1.3902.3.315.1.7
OBJECT IDENTIFIER    

zxr10MplsTeInterfaceObjects 1.3.6.1.4.1.3902.3.315.1.8
OBJECT IDENTIFIER    

zxr10MplsIpExplicitObjects 1.3.6.1.4.1.3902.3.315.1.9
OBJECT IDENTIFIER    

zxr10MplsPathOptObjects 1.3.6.1.4.1.3902.3.315.1.10
OBJECT IDENTIFIER    

zxr10MplsAdminGroupListObjects 1.3.6.1.4.1.3902.3.315.1.11
OBJECT IDENTIFIER    

zxr10MplsHotStandbyLspObjects 1.3.6.1.4.1.3902.3.315.1.12
OBJECT IDENTIFIER    

zxr10MplsTunnelEnable 1.3.6.1.4.1.3902.3.315.1.1.1
If this object is true, then it enables the zxr10MplsTunnel.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER false(0), true(1)  

zxr10MplsTunnelConfiguredNum 1.3.6.1.4.1.3902.3.315.1.1.2
The number of tunnels configured on this device. A tunnel is considered configured if the zxr10MplsTunnelRowStatus is active(1).
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

zxr10MplsTunnelTEDistProto 1.3.6.1.4.1.3902.3.315.1.1.3
The traffic engineering distribution protocol(s) used by this LSR. Note that an LSR may support more than one distribution protocol simultaneously.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER other(0), ospf(1), isis(2), both(3)  

zxr10MplsTunnelImplicitNullEnable 1.3.6.1.4.1.3902.3.315.1.1.4
If this object is true, then it enables the ImplicitNull.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER false(0), true(1)  

zxr10MplsTunnelGrEnable 1.3.6.1.4.1.3902.3.315.1.1.5
If this object is true, then it enables the GR.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER false(0), true(1)  

zxr10MplsTunnelGrRefreshInterval 1.3.6.1.4.1.3902.3.315.1.1.6
Graceful-restart interval time 10~30000.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Unsigned32  

zxr10MplsTunnelGrRefreshMisses 1.3.6.1.4.1.3902.3.315.1.1.7
Graceful-restart miss number 4~10.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Unsigned32  

zxr10MplsTunnelGrRecoveryTime 1.3.6.1.4.1.3902.3.315.1.1.8
Graceful-restart RecoveryTime 0~300000.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Unsigned32  

zxr10MplsTunnelGrRestartTime 1.3.6.1.4.1.3902.3.315.1.1.9
Graceful-restart time 0~300000.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Unsigned32  

zxr10MplsTunnelSignallingRefreshInterval 1.3.6.1.4.1.3902.3.315.1.1.10
RefreshInterval 5000~65535000
Status: obsolete Access: read-only
OBJECT-TYPE    
  Unsigned32  

zxr10MplsTunnelSignallingRefreshMisses 1.3.6.1.4.1.3902.3.315.1.1.11
SignallingRefreshMisses 2~10
Status: obsolete Access: read-only
OBJECT-TYPE    
  Unsigned32  

zxr10MplsVersion 1.3.6.1.4.1.3902.3.315.1.1.12
MPLS version number.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

zxr10MplsActiveLsps 1.3.6.1.4.1.3902.3.315.1.1.13
Number of active LSPs.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

zxr10MplsAutobakTunnelMinID 1.3.6.1.4.1.3902.3.315.1.1.16
The Min tunnelID can be used by Auto baktunnel.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Unsigned32  

zxr10MplsAutobakTunnelMaxID 1.3.6.1.4.1.3902.3.315.1.1.17
The Max tunnelID can be used by Auto baktunnel.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Unsigned32  

zxr10MplsRouterID 1.3.6.1.4.1.3902.3.315.1.1.18
TE_Routerid with interface name.
Status: obsolete Access: read-only
OBJECT-TYPE    
  DisplayString  

zxr10MplsTunnelTable 1.3.6.1.4.1.3902.3.315.1.2.1
The mplsTunnelTable allows new MPLS tunnels to be created between an LSR and a remote endpoint, and existing tunnels to be reconfigured or removed. Note that only point-to-point tunnel segments are supported, although multipoint-to-point and pointto- multipoint connections are supported by an LSR acting as a cross-connect. Each MPLS tunnel can thus have one out-segment originating at this LSR and/or one in-segment terminating at this LSR.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Zxr10MplsTunnelEntry

zxr10MplsTunnelEntry 1.3.6.1.4.1.3902.3.315.1.2.1.1
An entry in this table represents an MPLS tunnel. An entry can be created by a network administrator or by an SNMP agent as instructed by an MPLS signalling protocol. Whenever a new entry is created with zxr10MplsTunnelIsIf set to true(1), then a corresponding entry is created in ifTable as well (see RFC 2863). The ifType of this entry is zxr10MplsTunnel(150). A tunnel entry needs to be uniquely identified across a MPLS network. Indices zxr10MplsTunnelIndex and zxr10MplsTunnelInstance uniquely identify a tunnel on the LSR originating the tunnel. To uniquely identify a tunnel across an MPLS network requires index zxr10MplsTunnelIngressLSRId. The last index zxr10MplsTunnelEgressLSRId is useful in identifying all instances of a tunnel that terminate on the same egress LSR.
Status: current Access: not-accessible
OBJECT-TYPE    
  Zxr10MplsTunnelEntry  

zxr10MplsTunnelIndex 1.3.6.1.4.1.3902.3.315.1.2.1.1.1
Uniquely identifies a set of tunnel instances between a pair of ingress and egress LSRs. Managers should obtain new values for row creation in this table by reading zxr10MplsTunnelIndexNext. When the MPLS signalling protocol is rsvp(2) this value SHOULD be equal to the value signaled in the Tunnel Id of the Session object. When the MPLS signalling protocol is crldp(3) this value SHOULD be equal to the value signaled in the LSP ID.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

zxr10MplsTunnelInstance 1.3.6.1.4.1.3902.3.315.1.2.1.1.2
Uniquely identifies a particular instance of a tunnel between a pair of ingress and egress LSRs. It is useful to identify multiple instances of tunnels for the purposes of backup and parallel tunnels. When the MPLS signaling protocol is rsvp(2) this value SHOULD be equal to the LSP Id of the Sender Template object. When the signaling protocol is crldp(3) there is no equivalent signaling object.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

zxr10MplsTunnelIngressLSRId 1.3.6.1.4.1.3902.3.315.1.2.1.1.3
Identity of the ingress LSR associated with this tunnel instance. When the MPLS signalling protocol is rsvp(2) this value SHOULD be equal to the Tunnel Sender Address in the Sender Template object and MAY be equal to the Extended Tunnel Id field in the SESSION object. When the MPLS signalling protocol is rldp(3) this value SHOULD be equal to the Ingress LSR Router ID field in the LSPID TLV object.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

zxr10MplsTunnelEgressLSRId 1.3.6.1.4.1.3902.3.315.1.2.1.1.4
Identity of the egress LSR associated with this tunnel instance.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

zxr10MplsTunnelOutLabel 1.3.6.1.4.1.3902.3.315.1.2.1.1.5
Out label of local tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

zxr10MplsTunnelOutIntf 1.3.6.1.4.1.3902.3.315.1.2.1.1.6
The name of out interface that local tunnel transits.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

zxr10MplsTunnelName 1.3.6.1.4.1.3902.3.315.1.2.1.1.7
The canonical name assigned to the tunnel. This name can be used to refer to the tunnel on the LSR's console port. If zxr10MplsTunnelIsIf is set to true then the ifName of the interface corresponding to this tunnel should have a value equal to zxr10MplsTunnelName. Also see the description of ifName in RFC 2863.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

zxr10MplsTunnelDescr 1.3.6.1.4.1.3902.3.315.1.2.1.1.8
A textual string containing information about the tunnel. If there is no description this object contains a zero length string. This object is may not be signaled by MPLS signaling protocols, consequentally the value of this object at transit and egress LSRs MAY be automatically generated or absent.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

zxr10MplsTunnelIsIf 1.3.6.1.4.1.3902.3.315.1.2.1.1.9
Denotes whether or not this tunnel corresponds to an interface represented in the interfaces group table. Note that if this variable is set to true then the ifName of the interface corresponding to this tunnel should have a value equal to zxr10MplsTunnelName. Also see the description of ifName in RFC 2863. This object is meaningful only at the ingress and egress LSRs.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER false(0), true(1)  

zxr10MplsTunnelIfIndex 1.3.6.1.4.1.3902.3.315.1.2.1.1.10
If zxr10MplsTunnelIsIf is set to true, then this value contains the LSR-assigned ifIndex which corresponds to an entry in the interfaces table. Otherwise this variable should contain the value of zero indicating that a valid ifIndex was not assigned to his tunnel interface.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..2147483647  

zxr10MplsTunnelIfType 1.3.6.1.4.1.3902.3.315.1.2.1.1.11
Type of tunnel interface.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unassigned(0), ipAddress(1), unnumbered(2)  

zxr10MplsTunnelIfAddrOrName 1.3.6.1.4.1.3902.3.315.1.2.1.1.12
Ip address or loopback name of tunnel interface.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

zxr10MplsTunnelIfMaskOrIndex 1.3.6.1.4.1.3902.3.315.1.2.1.1.13
Subnet mask or loopback interface index of tunnel interface
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

zxr10MplsTunnelOwner 1.3.6.1.4.1.3902.3.315.1.2.1.1.14
Denotes the entity that created and is responsible for managing this tunnel. This column isau tomatically filled by the agent on creation of a ow.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), other(2), snmp(3), ldp(4), crldp(5), rsvpTe(6), policyAgent(7)  

zxr10MplsTunnelRole 1.3.6.1.4.1.3902.3.315.1.2.1.1.15
This value signifies the role that this tunnel entry/instance represents. This value MUST be set to head(1) at the originating point of the tunnel. This value MUST be set to transit(2) at transit points along the tunnel, if transit points are supported. This value MUST be set to tail(3) at the terminating point of the tunnel if tunnel tails are supported. The value headTail(4) is provided for tunnels that begin and end on the same LSR.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER head(1), transit(2), tail(3), headTail(4)  

zxr10MplsTunnelSignallingProto 1.3.6.1.4.1.3902.3.315.1.2.1.1.16
The signalling protocol, if any, used to setup this tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER none(1), rsvp(2), crldp(3), other(4)  

zxr10MplsTunnelSetupPrio 1.3.6.1.4.1.3902.3.315.1.2.1.1.17
Indicates the setup priority of this tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..7  

zxr10MplsTunnelHoldingPrio 1.3.6.1.4.1.3902.3.315.1.2.1.1.18
Indicates the holding priority for this tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..7  

zxr10MplsTunnelSessionAttributes 1.3.6.1.4.1.3902.3.315.1.2.1.1.19
This bit mask indicates optional session values for this tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

zxr10MplsTunnelFrrEnable 1.3.6.1.4.1.3902.3.315.1.2.1.1.20
If this tunnel enables FRR,this value is true,otherwise it is false.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER false(0), true(1)  

zxr10MplsTunnelResourcePointer 1.3.6.1.4.1.3902.3.315.1.2.1.1.21
This variable represents a pointer to the traffic parameter specification for this tunnel. This value may point at an entry in the zxr10MplsTunnelResourceEntry to indicate which zxr10MplsTunnelResourceEntry is to be assigned to this LSP instance. This value may optionally point at an externally defined traffic parameter specification table. A value of zeroDotZero indicates best-effort treatment. By having the same value of this object, two or more LSPs can indicate resource sharing.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

zxr10MplsTunnelPrimaryInstance 1.3.6.1.4.1.3902.3.315.1.2.1.1.22
Specifies the instance index of the primary instance of this tunnel. More details of the definition of tunnel instances and the primary tunnel instance can be found in the description of the TEXTUAL-CONVENTION MplsTunnelInstanceIndex.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

zxr10MplsTunnelInstancePriority 1.3.6.1.4.1.3902.3.315.1.2.1.1.23
This value indicates which priority, in descending order, with 0 indicating the lowest priority, within a group of tunnel instances. A group of tunnel instances is defined as a set of LSPs with the same zxr10MplsTunnelIndex in this table, but with a different zxr10MplsTunnelInstance. Tunnel instance priorities are used to denote the priority at which a particular tunnel instance will supercede another. Instances of tunnels containing the same zxr10MplsTunnelInstancePriority will be used for load sharing.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

zxr10MplsTunnelHopTableIndex 1.3.6.1.4.1.3902.3.315.1.2.1.1.24
Index into the zxr10MplsTunnelHopTable entry that specifies the explicit route hops for this tunnel. This object is meaningful only at the head-end of the tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

zxr10MplsTunnelPathInUse 1.3.6.1.4.1.3902.3.315.1.2.1.1.25
This value denotes the configured path that was chosen for this tunnel. This value reflects the secondary index into zxr10MplsTunnelHopTable. This path may not exactly match the one in zxr10MplsTunnelARHopTable due to the fact that some CSPF modification may have taken place. See zxr10MplsTunnelARHopTable for the actual path being taken by the tunnel. A value of zero denotes that no path is currently in use or available.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..16  

zxr10MplsTunnelARHopTableIndex 1.3.6.1.4.1.3902.3.315.1.2.1.1.26
Index into the zxr10MplsTunnelARHopTable entry that specifies the actual hops traversed by the tunnel. This is automatically updated by the agent when the actual hops becomes available.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

zxr10MplsTunnelCHopTableIndex 1.3.6.1.4.1.3902.3.315.1.2.1.1.27
Index into the zxr10MplsTunnelCHopTable entry that specifies the computed hops traversed by the tunnel. This is automatically updated by the agent when computed hops become available or when computed hops get modified.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

zxr10MplsTunnelTotalUpTime 1.3.6.1.4.1.3902.3.315.1.2.1.1.28
This value represents the aggregate up time for all instances of this tunnel, if available. If this value is unavailable, it MUST return a value of 0.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

zxr10MplsTunnelInstanceUpTime 1.3.6.1.4.1.3902.3.315.1.2.1.1.29
This value identifies the total time that this tunnel instance's operStatus has been Up(1).
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

zxr10MplsTunnelPrimaryUpTime 1.3.6.1.4.1.3902.3.315.1.2.1.1.30
Specifies the total time the primary instance of this tunnel has been active. The primary instance of this tunnel is defined in zxr10MplsTunnelPrimaryInstance.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

zxr10MplsTunnelPathChanges 1.3.6.1.4.1.3902.3.315.1.2.1.1.31
Specifies the number of times the actual path for this tunnel instance has changed.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

zxr10MplsTunnelLastPathChange 1.3.6.1.4.1.3902.3.315.1.2.1.1.32
Specifies the time since the last change to the actual path for this tunnel instance.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

zxr10MplsTunnelCreationTime 1.3.6.1.4.1.3902.3.315.1.2.1.1.33
Specifies the value of SysUpTime when the first instance of this tunnel came into existence. That is, when the value of zxr10MplsTunnelOperStatus was first set to up(1).
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

zxr10MplsTunnelStateTransitions 1.3.6.1.4.1.3902.3.315.1.2.1.1.34
Specifies the number of times the state (zxr10MplsTunnelOperStatus) of this tunnel instance has changed.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

zxr10MplsTunnelAdminStatus 1.3.6.1.4.1.3902.3.315.1.2.1.1.35
Indicates the desired operational status of this tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER up(1), down(2)  

zxr10MplsTunnelOperStatus 1.3.6.1.4.1.3902.3.315.1.2.1.1.36
Indicates the actual operational status of this tunnel, which is typically but not limited to, a function of the state of individual segments of this tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER up(1), down(2)  

zxr10MplsTunnelRowStatus 1.3.6.1.4.1.3902.3.315.1.2.1.1.37
This variable is used to create, modify, and/or delete a row in this table. When a row in this table is in active(1) state, no objects in that row can be modified by the agent except zxr10MplsTunnelAdminStatus, zxr10MplsTunnelRowStatus and zxr10MplsTunnelStorageType.
Status: current Access: read-only
OBJECT-TYPE    
  RowStatus  

zxr10MplsTunnelStorageType 1.3.6.1.4.1.3902.3.315.1.2.1.1.38
The storage type for this tunnel entry. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row.
Status: current Access: read-only
OBJECT-TYPE    
  StorageType  

zxr10MplsTunnelAutorouteEnable 1.3.6.1.4.1.3902.3.315.1.2.1.1.39
If this object is true, then it enables the Autoroute.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER false(0), true(1)  

zxr10MplsTunnelAutorouteMetricType 1.3.6.1.4.1.3902.3.315.1.2.1.1.40
Indicates the autoroute metric type over this tunnel.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER igp(0), defaultAbsolute(1), absolute(2), relative(3)  

zxr10MplsTunnelAutorouteMetricRelativeValue 1.3.6.1.4.1.3902.3.315.1.2.1.1.41
Indicates the value that adjust metric for autoroutes relative to IGP.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Integer32  

zxr10MplsTunnelAutorouteMetricAbsoluteValue 1.3.6.1.4.1.3902.3.315.1.2.1.1.42
Indicates the value for all autoroutes over tunnel.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Unsigned32  

zxr10MplsTunnelRecordRouteEnable 1.3.6.1.4.1.3902.3.315.1.2.1.1.43
If this object is true, then it enables the RecordRoute
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER false(0), true(1)  

zxr10MplsTunnelCACStatus 1.3.6.1.4.1.3902.3.315.1.2.1.1.44
CAC switch status
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

zxr10MplsTunnelLspOctets 1.3.6.1.4.1.3902.3.315.1.2.1.1.45
The number of octets that have been forwarded over current LSP active path. The number reported is not realtime, may subject to several minutes delay. The delay is controllable by mpls statistics gathering interval, which by default is once every 5 minutes. If mpls statistics gathering is not enabled, this number will not increment.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxr10MplsTunnelLspPackets 1.3.6.1.4.1.3902.3.315.1.2.1.1.46
The number of packets that have been forwarded over current LSP active path. The number reported is not realtime, may subject to several minutes delay. The delay is controllable by mpls statistics gathering interval, which by default is once every 5 minutes. If mpls statistics gathering is not enabled, this number will not increment.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxr10MplsTunnelLspLastTransition 1.3.6.1.4.1.3902.3.315.1.2.1.1.47
The time in 10-millisecond units since the last transition occurred on this LSP.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

zxr10MplsTunnelLspConfiguredPaths 1.3.6.1.4.1.3902.3.315.1.2.1.1.48
The number of paths configured for this LSP.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

zxr10MplsTunnelPathType 1.3.6.1.4.1.3902.3.315.1.2.1.1.49
The type of path that is active, i.e., a primary path, a standby path, or a generic secondary path. This field is meaningless unless mplsPathName is not empty
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER other(1), primary(2)  

zxr10MplsTunnelPathExplicitRoute 1.3.6.1.4.1.3902.3.315.1.2.1.1.50
The explicit route used to set up this LSP. This may either be the route configured by the user, or a route automatically computed to satisfy constraints set by the user. This field is a displayable string in the format of XXX.XXX.XXX.XXX S/L repeated for each explicit address. The S/L character stands for Strict/Loose route. This field is meaningless unless mplsPathName is not empty
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..1024)  

zxr10MplsTunnelPathRecordRoute 1.3.6.1.4.1.3902.3.315.1.2.1.1.51
The route actually used for this path, as recorded by the signaling protocol. This field is a displayable string in the format of XXX.XXX.XXX.XXX repeated for each address. This field is meaningless unless mplsPathName is not empty
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..1024)  

zxr10MplsTunnelPathCOS 1.3.6.1.4.1.3902.3.315.1.2.1.1.52
The configured Class Of Service on this path. If the value is between 0 and 7 inclusive, this value will be inserted in the 3 bit COS field in the label. If the value is 255, the value in the COS field of the label will depend on other factors. This field is meaningless unless mplsPathName is not empty
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..7 | 255  

zxr10MplsTunnelPathInclude 1.3.6.1.4.1.3902.3.315.1.2.1.1.53
This is a configured set of colors (administrative groups) specified as a bit vector (i.e., bit n is 1 if color n is in the set, where n = 0 is the LSB). For each link that this path goes through, the link MUST have colors associated with it, and the intersection of the link's colors and the 'include' set MUST be non-null. This field is meaningless unless mplsPathName is not empty
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

zxr10MplsTunnelPathExclude 1.3.6.1.4.1.3902.3.315.1.2.1.1.54
This is a configured set of colors (administrative groups) specified as a bit vector (i.e., bit n is 1 if color n is in the set, where n = 0 is the LSB). For each link that this path goes through, the link MUST have colors associated with it, and the intersection of the link's colors and the 'exclude' set MUST be null. This field is meaningless unless mplsPathName is not empty
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

zxr10MplsTunnelHotStandbyEnable 1.3.6.1.4.1.3902.3.315.1.2.1.1.55
If this object is true, then it enables hotstandby.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER false(0), true(1)  

zxr10MplsTunnelHotStandbyPrimaryPathOption 1.3.6.1.4.1.3902.3.315.1.2.1.1.56
Specifies the pathOption of protected LSP.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Unsigned32  

zxr10MplsTunnelHotStandbySecondaryPathOption 1.3.6.1.4.1.3902.3.315.1.2.1.1.57
Specifies the pathOption of hotstandby LSP.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Unsigned32  

zxr10MplsTunnelHotStandbyInstance 1.3.6.1.4.1.3902.3.315.1.2.1.1.58
Uniquely identifies the tunnel instance of hotstandby lsp.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

zxr10MplsTunnelHotStandbyState 1.3.6.1.4.1.3902.3.315.1.2.1.1.59
Specifies the hotstandby state of the tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER active(2), ready(1), unready(0)  

zxr10MplsTunnelBfdEnable 1.3.6.1.4.1.3902.3.315.1.2.1.1.60
If this object is true, then it enables bfd on the tunnel.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER false(0), true(1)  

zxr10MplsTunnelBFDmult 1.3.6.1.4.1.3902.3.315.1.2.1.1.61
The detecting multiple of receive/send CONTROL message.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Unsigned32  

zxr10MplsTunnelBFDminTxInterval 1.3.6.1.4.1.3902.3.315.1.2.1.1.62
The minimal time to send CONTROL message.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Unsigned32  

zxr10MplsTunnelBFDminRxInterval 1.3.6.1.4.1.3902.3.315.1.2.1.1.63
The minimal time to receive CONTROL message.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Unsigned32  

zxr10MplsTunnelBFDstatus 1.3.6.1.4.1.3902.3.315.1.2.1.1.64
The status of bfd.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER bfddisconnect(0), bfddown(1), bfdup(2)  

zxr10MplsTunnelFrrProtectionMethod 1.3.6.1.4.1.3902.3.315.1.2.1.1.65
Indicates which protection method is used for fast reroute on this device. unknown(0) indicates no FRR protection exists. facilityBackup(1) indicates bypass protection exists. oneToOneBackup(2) indicates detour protection exists.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER unknown(0), facilityBackup(1), oneToOneBackup(2)  

zxr10MplsTunnelBandwidth 1.3.6.1.4.1.3902.3.315.1.2.1.1.66
Specifies the bandwidth of the tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

zxr10MplsTunnelSubPoolBandwidth 1.3.6.1.4.1.3902.3.315.1.2.1.1.67
Specifies the sub pool bandwidth of the tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

zxr10MplsTunnelIgpMetric 1.3.6.1.4.1.3902.3.315.1.2.1.1.68
The value of igp metric is used for build tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

zxr10MplsTunnelTeMetric 1.3.6.1.4.1.3902.3.315.1.2.1.1.69
The value of te metric is used for build tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

zxr10MplsTunnelBFDSlaveStatus 1.3.6.1.4.1.3902.3.315.1.2.1.1.70
The status of slave lsp bfd.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER bfddisconnect(0), bfddown(1), bfdup(2)  

zxr10MplsTunnelAssociateStatus 1.3.6.1.4.1.3902.3.315.1.2.1.1.71
The associate bidirect status of this tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER disabled(1), unbound(2), bound(3)  

zxr10MplsRemoteTunnelTable 1.3.6.1.4.1.3902.3.315.1.3.1
The Mpls Remote Tunnel Table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Zxr10MplsRemoteTunnelEntry

zxr10MplsRemoteTunnelEntry 1.3.6.1.4.1.3902.3.315.1.3.1.1
An entry in this table represents an MPLS remote tunnel.
Status: current Access: not-accessible
OBJECT-TYPE    
  Zxr10MplsRemoteTunnelEntry  

zxr10MplsRemoteTunnelIndex 1.3.6.1.4.1.3902.3.315.1.3.1.1.1
Uniquely identifies a set of tunnel instances between a pair of ingress and egress LSRs.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

zxr10MplsRemoteTunnelInstance 1.3.6.1.4.1.3902.3.315.1.3.1.1.2
Uniquely identifies a particular instance of a tunnel between a pair of ingress and egress LSRs. It is useful to identify multiple instances of tunnels for the purposes of backup and parallel tunnels.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

zxr10MplsRemoteTunnelIngressLSRId 1.3.6.1.4.1.3902.3.315.1.3.1.1.3
Identity of the ingress LSR associated with this tunnel instance.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

zxr10MplsRemoteTunnelEgressLSRId 1.3.6.1.4.1.3902.3.315.1.3.1.1.4
Identity of the egress LSR associated with this tunnel instance.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

zxr10MplsRemoteTunnelInLabel 1.3.6.1.4.1.3902.3.315.1.3.1.1.5
In label of Remote tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

zxr10MplsRemoteTunnelOutLabel 1.3.6.1.4.1.3902.3.315.1.3.1.1.6
Out label of Remote tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

zxr10MplsRemoteTunnelInIntf 1.3.6.1.4.1.3902.3.315.1.3.1.1.7
The name of in interface that remote tunnel transits.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

zxr10MplsRemoteTunnelOutIntf 1.3.6.1.4.1.3902.3.315.1.3.1.1.8
The name of out interface that remote tunnel transits.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

zxr10MplsRemoteTunnelName 1.3.6.1.4.1.3902.3.315.1.3.1.1.9
The canonical name assigned to the tunnel. This name can be used to refer to the tunnel on the LSR's console port. If zxr10MplsRemoteTunnelIsIf is set to true then the ifName of the interface corresponding to this tunnel should have a value equal to zxr10MplsRemoteTunnelName. Also see the description of ifName in RFC 2863.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

zxr10MplsRemoteTunnelIsIf 1.3.6.1.4.1.3902.3.315.1.3.1.1.11
Denotes whether or not this tunnel corresponds to an interface represented in the interfaces group table. Note that if this variable is set to true then the ifName of the interface corresponding to this tunnel should have a value equal to zxr10MplsRemoteTunnelName. Also see the description of ifName in RFC 2863. This object is meaningful only at the ingress and egress LSRs.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER false(0), true(1)  

zxr10MplsRemoteTunnelOwner 1.3.6.1.4.1.3902.3.315.1.3.1.1.12
Denotes the entity that created and is responsible for managing this tunnel. This column isau tomatically filled by the agent on creation of a ow.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), other(2), snmp(3), ldp(4), crldp(5), rsvpTe(6), policyAgent(7)  

zxr10MplsRemoteTunnelRole 1.3.6.1.4.1.3902.3.315.1.3.1.1.13
This value signifies the role that this tunnel entry/instance represents. This value MUST be set to head(1) at the originating point of the tunnel. This value MUST be set to transit(2) at transit points along the tunnel, if transit points are supported. This value MUST be set to tail(3) at the terminating point of the tunnel if tunnel tails are supported. The value headTail(4) is provided for tunnels that begin and end on the same LSR.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER head(1), transit(2), tail(3), headTail(4)  

zxr10MplsRemoteTunnelSignallingProto 1.3.6.1.4.1.3902.3.315.1.3.1.1.14
The signalling protocol, if any, used to setup this tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER none(1), rsvp(2), crldp(3), other(4)  

zxr10MplsRemoteTunnelSetupPrio 1.3.6.1.4.1.3902.3.315.1.3.1.1.15
Indicates the setup priority of this tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..7  

zxr10MplsRemoteTunnelHoldingPrio 1.3.6.1.4.1.3902.3.315.1.3.1.1.16
Indicates the holding priority for this tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..7  

zxr10MplsRemoteTunnelSessionAttributes 1.3.6.1.4.1.3902.3.315.1.3.1.1.17
This bit mask indicates optional session values for this tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

zxr10MplsRemoteTunnelLocalProtectInUse 1.3.6.1.4.1.3902.3.315.1.3.1.1.18
Indicates that the local repair mechanism is in use to maintain this tunnel (usually in the face of an outage of the link it was previously routed over).
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER false(0), true(1)  

zxr10MplsRemoteTunnelPrimaryInstance 1.3.6.1.4.1.3902.3.315.1.3.1.1.19
Specifies the instance index of the primary instance of this tunnel. More details of the definition of tunnel instances and the primary tunnel instance can be found in the description of the TEXTUAL-CONVENTION MplsTunnelInstanceIndex.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

zxr10MplsRemoteTunnelInstancePriority 1.3.6.1.4.1.3902.3.315.1.3.1.1.20
This value indicates which priority, in descending order, with 0 indicating the lowest priority, within a group of tunnel instances. A group of tunnel instances is defined as a set of LSPs with the same zxr10MplsRemoteTunnelIndex in this table, but with a different zxr10MplsRemoteTunnelInstance. Tunnel instance priorities are used to denote the priority at which a particular tunnel instance will supercede another. Instances of tunnels containing the same zxr10MplsRemoteTunnelInstancePriority will be used for load sharing.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

zxr10MplsRemoteTunnelTotalUpTime 1.3.6.1.4.1.3902.3.315.1.3.1.1.21
This value represents the aggregate up time for all instances of this tunnel, if available. If this value is unavailable, it MUST return a value of 0.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

zxr10MplsRemoteTunnelInstanceUpTime 1.3.6.1.4.1.3902.3.315.1.3.1.1.22
This value identifies the total time that this tunnel instance's operStatus has been Up(1).
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

zxr10MplsRemoteTunnelPrimaryUpTime 1.3.6.1.4.1.3902.3.315.1.3.1.1.23
Specifies the total time the primary instance of this tunnel has been active. The primary instance of this tunnel is defined in zxr10MplsRemoteTunnelPrimaryInstance.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

zxr10MplsRemoteTunnelCreationTime 1.3.6.1.4.1.3902.3.315.1.3.1.1.26
Specifies the value of SysUpTime when the first instance of this tunnel came into existence. That is, when the value of zxr10MplsRemoteTunnelOperStatus was first set to up(1).
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

zxr10MplsRemoteTunnelAdminStatus 1.3.6.1.4.1.3902.3.315.1.3.1.1.28
Indicates the desired operational status of this tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER up(1), down(2)  

zxr10MplsRemoteTunnelOperStatus 1.3.6.1.4.1.3902.3.315.1.3.1.1.29
Indicates the actual operational status of this tunnel, which is typically but not limited to, a function of the state of individual segments of this tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER up(1), down(2)  

zxr10MplsRemoteTunnelRowStatus 1.3.6.1.4.1.3902.3.315.1.3.1.1.30
This variable is used to create, modify, and/or delete a row in this table. When a row in this table is in active(1) state, no objects in that row can be modified by the agent except zxr10MplsRemoteTunnelAdminStatus, zxr10MplsRemoteTunnelRowStatus and zxr10MplsRemoteTunnelStorageType.
Status: current Access: read-only
OBJECT-TYPE    
  RowStatus  

zxr10MplsRemoteTunnelStorageType 1.3.6.1.4.1.3902.3.315.1.3.1.1.31
The storage type for this tunnel entry. Conceptual rows having the value 'permanen' need not allow write-access to any columnar objects in the row.
Status: current Access: read-only
OBJECT-TYPE    
  StorageType  

zxr10MplsRemoteTunnelPathExplicitRoute 1.3.6.1.4.1.3902.3.315.1.3.1.1.32
The explicit route used to set up this LSP. This may either be the route configured by the user, or a route automatically computed to satisfy constraints set by the user. This field is a displayable string in the format of XXX.XXX.XXX.XXX S/L repeated for each explicit address. The S/L character stands for Strict/Loose route. This field is meaningless unless mplsPathName is not empty
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..1024)  

zxr10MplsRemoteTunnelPathRecordRoute 1.3.6.1.4.1.3902.3.315.1.3.1.1.33
The route actually used for this path, as recorded by the signaling protocol. This field is a displayable string in the format of XXX.XXX.XXX.XXX repeated for each address. This field is meaningless unless mplsPathName is not empty
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..1024)  

zxr10MplsRemoteTunnelFrrProtectionMethod 1.3.6.1.4.1.3902.3.315.1.3.1.1.34
Indicates which protection method is used for fast reroute on this device. unknown(0) indicates no FRR protection exists. facilityBackup(1) indicates bypass protection exists. oneToOneBackup(2) indicates detour protection exists.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unknown(0), facilityBackup(1), oneToOneBackup(2)  

zxr10MplsRemoteTunnelARHopTableIndex 1.3.6.1.4.1.3902.3.315.1.3.1.1.35
Index into the zxr10MplsTunnelARHopTable entry that specifies the actual hops traversed by the remote tunnel. This is automatically updated by the agent when the actual hops becomes available.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

zxr10MplsRemoteTunnelLspInOctets 1.3.6.1.4.1.3902.3.315.1.3.1.1.36
The number of octets that have been forwarded over current LSP active path. The number reported is not realtime, may subject to several minutes delay. The delay is controllable by mpls statistics gathering interval, which by default is once every 5 minutes. If mpls statistics gathering is not enabled, this number will not increment.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxr10MplsRemoteTunnelLspInPackets 1.3.6.1.4.1.3902.3.315.1.3.1.1.37
The number of packets that have been forwarded over current LSP active path. The number reported is not realtime, may subject to several minutes delay. The delay is controllable by mpls statistics gathering interval, which by default is once every 5 minutes. If mpls statistics gathering is not enabled, this number will not increment.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

zxr10MplsTunnelHopTable 1.3.6.1.4.1.3902.3.315.1.4.1
The zxr10MplsTunnelHopTable is used to indicate the hops, strict or loose, for an instance of an MPLS tunnel defined in zxr10MplsTunnelTable, when it is established via signalling, for the outgoing direction of the tunnel.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Zxr10MplsTunnelHopEntry

zxr10MplsTunnelHopEntry 1.3.6.1.4.1.3902.3.315.1.4.1.1
An entry in this table represents a tunnel hop. An entry is created by a network administrator for signaled ERLSP set up by an MPLS signalling protocol.
Status: current Access: not-accessible
OBJECT-TYPE    
  Zxr10MplsTunnelHopEntry  

zxr10MplsTunnelHopListIndex 1.3.6.1.4.1.3902.3.315.1.4.1.1.1
Primary index into this table identifying a particular explicit route object.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

zxr10MplsTunnelHopPathOptionIndex 1.3.6.1.4.1.3902.3.315.1.4.1.1.2
Secondary index into this table identifying a particular group of hops representing a particular configured path. This is otherwise known as a path option.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

zxr10MplsTunnelHopIndex 1.3.6.1.4.1.3902.3.315.1.4.1.1.3
Tertiary index into this table identifying a particular hop.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

zxr10MplsTunnelHopAddrType 1.3.6.1.4.1.3902.3.315.1.4.1.1.4
The Hop Address Type of this tunnel hop.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unknown(0), ipv4(1), ipv6(2), asnumber(3), unnum(4), lspid(5)  

zxr10MplsTunnelHopIpAddr 1.3.6.1.4.1.3902.3.315.1.4.1.1.5
The Tunnel Hop Address for this tunnel hop.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

zxr10MplsTunnelHopIpPrefixLen 1.3.6.1.4.1.3902.3.315.1.4.1.1.6
If zxr10MplsTunnelHopAddrType is set to ipv4(1) or ipv6(2), then this value will contain an appropriate prefix length for the IP address in object zxr10MplsTunnelHopIpAddr. Otherwise this value is irrelevant and should be ignored.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

zxr10MplsTunnelHopAsNumber 1.3.6.1.4.1.3902.3.315.1.4.1.1.7
If zxr10MplsTunnelHopAddrType is set to asnumber(3), then this value will contain the AS number of this hop. Otherwise the agent should set this object to zerolength string and the manager should ignore this.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

zxr10MplsTunnelHopAddrUnnum 1.3.6.1.4.1.3902.3.315.1.4.1.1.8
If zxr10MplsTunnelHopAddrType is set to unnum(4), then this value will contain the interface identifier of the unnumbered interface for this hop. This object should be used in conjunction with zxr10MplsTunnelHopIpAddress which would contain the LSR Router ID in this case. Otherwise the agent should set this object to zero-length string and the manager should ignore this.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

zxr10MplsTunnelHopLspId 1.3.6.1.4.1.3902.3.315.1.4.1.1.9
If zxr10MplsTunnelHopAddrType is set to lspid(5), then this value will contain the LSPID of a tunnel of this hop. The present tunnel being configured is tunneled through this hop (using label stacking). This object is otherwise insignificant and should contain a value of 0 to indicate this fact.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

zxr10MplsTunnelHopType 1.3.6.1.4.1.3902.3.315.1.4.1.1.10
Denotes whether this tunnel hop is routed in a strict or loose fashion. The value of this object has no meaning if the zxr10MplsTunnelHopInclude object is set to 'false'.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER strict(1), loose(2)  

zxr10MplsTunnelHopInclude 1.3.6.1.4.1.3902.3.315.1.4.1.1.11
If this value is set to true, then this indicates that this hop must be included in the tunnel's path. If this value is set to 'false', then this hoph must be avoided when calculating the path for this tunnel. The default value of this object is 'true', so that by default all indicated hops are included in the CSPF path computation. If this object is set to 'false' the value of zxr10MplsTunnelHopType should be ignored.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER false(0), true(1)  

zxr10MplsTunnelHopPathOptionName 1.3.6.1.4.1.3902.3.315.1.4.1.1.12
The description of this series of hops as they relate to the specified path option. The value of this object SHOULD be the same for each hop in the series that comprises a path option.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

zxr10MplsTunnelHopEntryPathComp 1.3.6.1.4.1.3902.3.315.1.4.1.1.13
If this value is set to dynamic, then the user should only specify the source and destination of the path and expect that the CSPF will calculate the remainder of the path. If this value is set to explicit, the user should specify the entire path for the tunnel to take. This path may contain strict or loose hops. Each hop along a specific path SHOULD have this object set to the same value.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER dynamic(1), explicit(2)  

zxr10MplsTunnelHopRowStatus 1.3.6.1.4.1.3902.3.315.1.4.1.1.14
This variable is used to create, modify, and/or delete a row in this table. When a row in this table is in active(1) state, no objects in that row can be modified by the agent except zxr10MplsTunnelHopRowStatus and zxr10MplsTunnelHopStorageType.
Status: current Access: read-only
OBJECT-TYPE    
  RowStatus  

zxr10MplsTunnelHopStorageType 1.3.6.1.4.1.3902.3.315.1.4.1.1.15
The storage type for this Hop entry. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row.
Status: current Access: read-only
OBJECT-TYPE    
  StorageType  

zxr10MplsTunnelResourceTable 1.3.6.1.4.1.3902.3.315.1.5.1
The zxr10MplsTunnelResourceTable allows a manager to specify which resources are desired for an MPLS tunnel. This table also allows several tunnels to point to a single entry in this table, implying that these tunnels should share resources.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Zxr10MplsTunnelResourceEntry

zxr10MplsTunnelResourceEntry 1.3.6.1.4.1.3902.3.315.1.5.1.1
An entry in this table represents a set of resources for an MPLS tunnel. An entry can be created by a network administrator or by an SNMP agent as instructed by any MPLS signalling protocol. An entry in this table referenced by a tunnel instance with zero zxr10MplsTunnelInstance value indicates a configured set of resource parameter. An entry referenced by a tunnel instance with a non-zero zxr10MplsTunnelInstance reflects the in-use resource parameters for the tunnel instance which may have been negotiated or modified by the MPLS signaling protocols.
Status: current Access: not-accessible
OBJECT-TYPE    
  Zxr10MplsTunnelResourceEntry  

zxr10MplsTunnelResourceIndex 1.3.6.1.4.1.3902.3.315.1.5.1.1.1
Uniquely identifies this row.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

zxr10MplsTunnelResourceMaxRate 1.3.6.1.4.1.3902.3.315.1.5.1.1.2
The maximum rate in bits/second. Note that setting zxr10MplsTunnelResourceMaxRate, zxr10MplsTunnelResourceMeanRate, and zxr10MplsTunnelResourceMaxBurstSize to 0 indicates besteffort treatment.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

zxr10MplsTunnelResourceMeanRate 1.3.6.1.4.1.3902.3.315.1.5.1.1.3
This object is copied into an instance of mplsTrafficParamMeanRate in the mplsTrafficParamTable. The OID of this table entry is then copied into the corresponding mplsInSegmentTrafficParamPtr.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

zxr10MplsTunnelResourceMaxBurstSize 1.3.6.1.4.1.3902.3.315.1.5.1.1.4
The maximum burst size in bytes.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

zxr10MplsTunnelResourceMeanBurstSize 1.3.6.1.4.1.3902.3.315.1.5.1.1.5
The mean burst size in bytes. The implementations which do not implement this variable must return noSuchObject exception for this object and must not allow a user to set this object.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

zxr10MplsTunnelResourceRowStatus 1.3.6.1.4.1.3902.3.315.1.5.1.1.6
This variable is used to create, modify, and/or delete a row in this table. When a row in this table is in active(1) state, no objects in that row can be modified by the agent except zxr10MplsTunnelResourceRowStatus and zxr10MplsTunnelResourceStorageType.
Status: current Access: read-only
OBJECT-TYPE    
  RowStatus  

zxr10MplsTunnelResourceStorageType 1.3.6.1.4.1.3902.3.315.1.5.1.1.7
The storage type for this Hop entry. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects Srinivasan, et al. Standards Track [Page 38] RFC 3812 MPLS-TE-STD-MIB June 2004 in the row.
Status: current Access: read-only
OBJECT-TYPE    
  StorageType  

zxr10MplsTunnelCHopTable 1.3.6.1.4.1.3902.3.315.1.6.1
The zxr10MplsTunnelCHopTable is used to indicate the hops, strict or loose, for an MPLS tunnel defined in zxr10MplsTunnelTable, as computed by a constraintbased routing protocol, based on the zxr10MplsTunnelHopTable for the outgoing direction of the tunnel. Thus at a transit LSR, this table (if the table is supported) MAY contain the path computed by the CSPF engine on (or on behalf of) this LSR. Each row in this table is indexed by zxr10MplsTunnelCHopListIndex. Each row also has a secondary index zxr10MplsTunnelCHopIndex, corresponding to the next hop that this row corresponds to. In case we want to specify a particular interface on the originating LSR of an outgoing tunnel by which we want packets to exit the LSR, we specify this as the first hop for this tunnel in zxr10MplsTunnelCHopTable. lease note that since the information necessary to build entries within this table may not be supported by some LSRs, implementation of this table is optional. Furthermore, since the information in this table describes the path computed by the CSPF engine the entries in this table are read-only.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Zxr10MplsTunnelCHopEntry

zxr10MplsTunnelCHopEntry 1.3.6.1.4.1.3902.3.315.1.6.1.1
An entry in this table represents a tunnel hop. An entry in this table is created by a path computation engine using CSPF techniques applied to he information collected by routing protocols and the hops specified in the corresponding zxr10MplsTunnelHopTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  Zxr10MplsTunnelCHopEntry  

zxr10MplsTunnelCHopListIndex 1.3.6.1.4.1.3902.3.315.1.6.1.1.1
Primary index into this table identifying a particular computed hop list.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

zxr10MplsTunnelCHopIndex 1.3.6.1.4.1.3902.3.315.1.6.1.1.2
Secondary index into this table identifying the particular hop.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

zxr10MplsTunnelCHopAddrType 1.3.6.1.4.1.3902.3.315.1.6.1.1.3
The Hop Address Type of this tunnel hop. Note that lspid(5) is a valid option only for tunnels signaled via CRLDP.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unknown(0), ipv4(1), ipv6(2), asnumber(3), unnum(4), lspid(5)  

zxr10MplsTunnelCHopIpAddr 1.3.6.1.4.1.3902.3.315.1.6.1.1.4
The Tunnel Hop Address for this tunnel hop. The type of this address is determined by the value of the corresponding zxr10MplsTunnelCHopAddrType. If zxr10MplsTunnelCHopAddrType is set to unnum(4), then this value will contain the LSR Router ID of the unnumbered interface. Otherwise the agent should set this object to the zero-length string and the manager SHOULD ignore this object.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

zxr10MplsTunnelCHopIpPrefixLen 1.3.6.1.4.1.3902.3.315.1.6.1.1.5
If zxr10MplsTunnelCHopAddrType is set to ipv4(1) or ipv6(2), then this value will contain an appropriate prefix length for the IP address in object zxr10MplsTunnelCHopIpAddr. Otherwise this value is irrelevant and should be ignored.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..2040  

zxr10MplsTunnelCHopAsNumber 1.3.6.1.4.1.3902.3.315.1.6.1.1.6
If zxr10MplsTunnelCHopAddrType is set to asnumber(3), then this value will contain the AS number of this hop. Otherwise the agent should set this object to zero-length string and the manager should ignore this.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

zxr10MplsTunnelCHopAddrUnnum 1.3.6.1.4.1.3902.3.315.1.6.1.1.7
If zxr10MplsTunnelCHopAddrType is set to unnum(4), then this value will contain the unnumbered interface identifier of this hop. This object should be used in conjunction with zxr10MplsTunnelCHopIpAddr which would contain the LSR Router ID in this case. Otherwise the agent should set this object to zerolength string and the manager should ignore this.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

zxr10MplsTunnelCHopLspId 1.3.6.1.4.1.3902.3.315.1.6.1.1.8
If zxr10MplsTunnelCHopAddrType is set to lspid(5), then his value will contain the LSP ID of this hop. his object is otherwise insignificant and should contain a value of 0 to indicate this fact.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

zxr10MplsTunnelCHopType 1.3.6.1.4.1.3902.3.315.1.6.1.1.9
Denotes whether this is tunnel hop is routed in a strict or loose fashion.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER strict(1), loose(2)  

zxr10MplsTunnelARHopTable 1.3.6.1.4.1.3902.3.315.1.7.1
The zxr10MplsTunnelARHopTable is used to indicate the hops for an MPLS tunnel defined in zxr10MplsTunnelTable, as reported by the MPLS signalling protocol. Thus at a transit LSR, this table (if the table is supported and if the signaling protocol is recording actual route information) contains the actual route of the whole tunnel. If the signaling protocol is not recording the actual route, this table MAY report the information from the zxr10MplsTunnelHopTable or the zxr10MplsTunnelCHopTable. Each row in this table is indexed by zxr10MplsTunnelARHopListIndex. Each row also has a secondary index zxr10MplsTunnelARHopIndex, corresponding to the next hop that this row corresponds to. Please note that since the information necessary to build entries within this table is not provided by some MPLS signalling protocols, implementation of this table is optional. Furthermore, since the information in this table is actually provided by the MPLS signalling protocol after the path has been set-up, the entries in this table are provided only for observation, and hence, all variables in this table are accessible exclusively as readonly. Note also that the contents of this table may change while it is being read because of re-routing activities. A network administrator may verify that the actual route read is consistent by reference to the zxr10MplsTunnelLastPathChange object.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Zxr10MplsTunnelARHopEntry

zxr10MplsTunnelARHopEntry 1.3.6.1.4.1.3902.3.315.1.7.1.1
An entry in this table represents a tunnel hop. An entry is created by the agent for signaled ERLSP set up by an MPLS signalling protocol.
Status: current Access: not-accessible
OBJECT-TYPE    
  Zxr10MplsTunnelARHopEntry  

zxr10MplsTunnelARHopListIndex 1.3.6.1.4.1.3902.3.315.1.7.1.1.1
Primary index into this table identifying a particular recorded hop list.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

zxr10MplsTunnelARHopIndex 1.3.6.1.4.1.3902.3.315.1.7.1.1.2
Secondary index into this table identifying the particular hop.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

zxr10MplsTunnelARHopAddrType 1.3.6.1.4.1.3902.3.315.1.7.1.1.3
The Hop Address Type of this tunnel hop. ote that lspid(5) is a valid option only for tunnels signaled via CRLDP.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unknown(0), ipv4(1), ipv6(2), asnumber(3), unnum(4), lspid(5)  

zxr10MplsTunnelARHopIpAddr 1.3.6.1.4.1.3902.3.315.1.7.1.1.4
The Tunnel Hop Address for this tunnel hop. The type of this address is determined by the value of the corresponding zxr10MplsTunnelARHopAddrType. If zxr10MplsTunnelARHopAddrType is set to unnum(4), then this value contains the LSR Router ID of the unnumbered interface. Otherwise the agent SHOULD set this object to the zero-length string and the manager should ignore this object.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

zxr10MplsTunnelARHopAddrUnnum 1.3.6.1.4.1.3902.3.315.1.7.1.1.5
If zxr10MplsTunnelARHopAddrType is set to unnum(4), then this value will contain the interface identifier of the unnumbered interface for this hop. This object should be used in conjunction with zxr10MplsTunnelARHopIpAddr which would contain the LSR Router ID in this case. Otherwise the agent should set this object to zero-length string and the manager should ignore this.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

zxr10MplsTunnelARHopLspId 1.3.6.1.4.1.3902.3.315.1.7.1.1.6
If zxr10MplsTunnelARHopAddrType is set to lspid(5), then this value will contain the LSP ID of this hop. This object is otherwise insignificant and should contain a value of 0 to indicate this fact.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..65535  

zxr10MplsInterfaceTable 1.3.6.1.4.1.3902.3.315.1.8.1
A list of mpls traffic-eng interface entries.
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Zxr10MplsInterfaceEntry

zxr10MplsInterfaceEntry 1.3.6.1.4.1.3902.3.315.1.8.1.1
An entry containing mpls traffic-eng interface.
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  Zxr10MplsInterfaceEntry  

zxr10MplsInterfaceIndex 1.3.6.1.4.1.3902.3.315.1.8.1.1.1
A unique value, greater than zero, for each interface whitch enables mpls traffic-eng.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Unsigned32  

zxr10MplsInterfaceName 1.3.6.1.4.1.3902.3.315.1.8.1.1.2
The name of this interface.
Status: obsolete Access: read-only
OBJECT-TYPE    
  DisplayString  

zxr10MplsInterfaceIpAddr 1.3.6.1.4.1.3902.3.315.1.8.1.1.3
The ip address of this interface.
Status: obsolete Access: read-only
OBJECT-TYPE    
  IpAddress  

zxr10MplsInterfaceMask 1.3.6.1.4.1.3902.3.315.1.8.1.1.4
The subnet mask of this interface.
Status: obsolete Access: read-only
OBJECT-TYPE    
  IpAddress  

zxr10MplsInterfaceBfdEnable 1.3.6.1.4.1.3902.3.315.1.8.1.1.5
If this interface enables bfd,this value is true,otherwise it is false.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER false(0), true(1)  

zxr10MplsInterfaceAuthEnable 1.3.6.1.4.1.3902.3.315.1.8.1.1.6
If this interface enables RSVP cryptographic authentication, this value is true,otherwise it is false.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER false(0), true(1)  

zxr10MplsInterfaceAuthChallengeEnable 1.3.6.1.4.1.3902.3.315.1.8.1.1.7
If this interface as a receiver enables rsvp authentication challenge,this value is true,otherwise it is false.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER false(0), true(1)  

zxr10MplsInterfaceAuthChallengeImpEnable 1.3.6.1.4.1.3902.3.315.1.8.1.1.8
If this interface as a sender enables rsvp authentication challenge,this value is true,otherwise it is false.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER false(0), true(1)  

zxr10MplsInterfaceAuthLifeTime 1.3.6.1.4.1.3902.3.315.1.8.1.1.9
Specifies maximum lifetime of neighbor authentication state on this interface
Status: obsolete Access: read-only
OBJECT-TYPE    
  Unsigned32  

zxr10MplsInterfaceAuthKey 1.3.6.1.4.1.3902.3.315.1.8.1.1.10
Specifies shared secret for all neighbors on this interface.
Status: obsolete Access: read-only
OBJECT-TYPE    
  DisplayString  

zxr10MplsInterfaceAuthType 1.3.6.1.4.1.3902.3.315.1.8.1.1.11
Specifies the type of authentication algorithm on this interface.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER md5(1), sha1(2)  

zxr10MplsInterfaceAuthWinSize 1.3.6.1.4.1.3902.3.315.1.8.1.1.12
Specifies received window size for authenticated messages on this interface.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER  

zxr10MplsInterfaceTotalBandwidth 1.3.6.1.4.1.3902.3.315.1.8.1.1.13
Specifies reservable total bandwidth on this interface.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Unsigned32  

zxr10MplsInterfaceAvailableBandwidth 1.3.6.1.4.1.3902.3.315.1.8.1.1.14
Specifies available bandwidth on this interface.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Unsigned32  

zxr10MplsInterfaceMetric 1.3.6.1.4.1.3902.3.315.1.8.1.1.15
The config metric of mpls te interface.
Status: obsolete Access: read-only
OBJECT-TYPE    
  DisplayString  

zxr10MplsInterfaceAutobakTunnelEnable 1.3.6.1.4.1.3902.3.315.1.8.1.1.16
If this object is true, then it prefers NODE_PROTECT to LINK_PROTECT by autobackup tunnel.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER false(0), true(1)  

zxr10MplsInterfaceAutobakTunnelNhoponly 1.3.6.1.4.1.3902.3.315.1.8.1.1.17
If this object is true, then it only requires LINK_PROTECT by autobackup tunnel.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER false(0), true(1)  

zxr10MplsInterfaceSrlgs 1.3.6.1.4.1.3902.3.315.1.8.1.1.18
Specifies srlgs on this interface.
Status: obsolete Access: read-only
OBJECT-TYPE    
  DisplayString  

zxr10MplsInterfaceAttributeFlags 1.3.6.1.4.1.3902.3.315.1.8.1.1.19
Specifies attribute flags on this interface.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER false(0), true(1)  

zxr10MplsIpExplicitTable 1.3.6.1.4.1.3902.3.315.1.9.1
Explicit-path table is user configured,the user should specify the entire path for the tunnel to take. This path may contain strict or loose hops. Each hop along a specific path SHOULD have this object set to the same value
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Zxr10MplsIpExplicitEntry

zxr10MplsIpExplicitEntry 1.3.6.1.4.1.3902.3.315.1.9.1.1
Explicit-path table entry.
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  Zxr10MplsIpExplicitEntry  

zxr10MplsIpExplicitNameType 1.3.6.1.4.1.3902.3.315.1.9.1.1.1
First index of Explicit-path table.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER explicitId(2), explicitName(3)  

zxr10MplsIpExplicitName 1.3.6.1.4.1.3902.3.315.1.9.1.1.2
Secondary index of Explicit-path table.If the explicit name type is explicitId then this value is a number, or it is a string.
Status: obsolete Access: read-only
OBJECT-TYPE    
  DisplayString  

zxr10MplsIpExplicitType 1.3.6.1.4.1.3902.3.315.1.9.1.1.3
router type string list 1:strict 2:loose 3:exclude intf 4:exclude router-id eg. 1.4.3.2
Status: obsolete Access: read-only
OBJECT-TYPE    
  DisplayString  

zxr10MplsIpExplicitNextIpAddr 1.3.6.1.4.1.3902.3.315.1.9.1.1.4
Identify the next hop IP address,This field is a displayable string in the format of 'XXX.XXX.XXX.XXX,' repeated.Example:1.1.1.1,1.1.1.2,...
Status: obsolete Access: read-only
OBJECT-TYPE    
  DisplayString  

zxr10MplsIpExplicitIndex 1.3.6.1.4.1.3902.3.315.1.9.1.1.5
ip addr index,This field is a displayable string in the format of '1,2,...'.
Status: obsolete Access: read-only
OBJECT-TYPE    
  DisplayString  

zxr10MplsPathOptTable 1.3.6.1.4.1.3902.3.315.1.10.1
Path option Table.
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Zxr10MplsPathOptEntry

zxr10MplsPathOptEntry 1.3.6.1.4.1.3902.3.315.1.10.1.1
Path option Table entry.
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  Zxr10MplsPathOptEntry  

zxr10MplsPathOptIndex 1.3.6.1.4.1.3902.3.315.1.10.1.1.1
The index of path option whitch equals to tunnel index.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Unsigned32 0..65535  

zxr10MplsPathOptValue 1.3.6.1.4.1.3902.3.315.1.10.1.1.2
Secondary index whitch identifies the configure value of path option .
Status: obsolete Access: read-only
OBJECT-TYPE    
  Unsigned32 0..16  

zxr10MplsPathOptType 1.3.6.1.4.1.3902.3.315.1.10.1.1.3
If this value is dynamic ,indicates that user only specify the source and destination of the path and the CSPF will calculate the remainder of the path. If this value is explicitId or explicitName, the user specify the entire path for the tunnel . This path may contain strict or loose hops. Each hop along a specific path SHOULD have this object set to the same value.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER dynamic(1), explicitId(2), explicitName(3)  

zxr10MplsPathOptName 1.3.6.1.4.1.3902.3.315.1.10.1.1.4
This value identifier the name of the path-option,when the type of the path-option is explicitName,the other times the value is null.
Status: obsolete Access: read-only
OBJECT-TYPE    
  DisplayString  

zxr10MplsPathOptHotStandbyType 1.3.6.1.4.1.3902.3.315.1.10.1.1.5
Specifies the hotstandby protect type of the path-option.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER none(0), dynamic(1), explicitId(2), explicitName(3), dynamic-prefer(4)  

zxr10MplsPathOptHotStandbyBackupPathName 1.3.6.1.4.1.3902.3.315.1.10.1.1.6
The name of Backup path.If the type of hotstandby protection is dynamic,then this value is '1'; if the type is dynamic prefer,then this value is '2'; if the type is explicitId or explicitName,then this value is a number or a string.
Status: obsolete Access: read-only
OBJECT-TYPE    
  DisplayString  

zxr10MplsAdminGroupListTable 1.3.6.1.4.1.3902.3.315.1.11.1
List of configured administrative groups. Administrative groups are used to label links in the Traffic Engineering topology in order to place constraints (include and exclude) on LSP paths.
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Zxr10MplsAdminGroupListEntry

zxr10MplsAdminGroupListEntry 1.3.6.1.4.1.3902.3.315.1.11.1.1
A mapping between a configured group number and its human-readable name. The group number should be between 0 and 31, inclusive.
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  Zxr10MplsAdminGroupListEntry  

zxr10MplsAdminGroupNumber 1.3.6.1.4.1.3902.3.315.1.11.1.1.1
Index of the administrative group.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Unsigned32  

zxr10MplsAdminGroupName 1.3.6.1.4.1.3902.3.315.1.11.1.1.2
Name of the administrative group.
Status: obsolete Access: read-only
OBJECT-TYPE    
  DisplayString  

zxr10MplsHotStandbyLspTable 1.3.6.1.4.1.3902.3.315.1.12.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Zxr10MplsHotStandbyLspEntry

zxr10MplsHotStandbyLspEntry 1.3.6.1.4.1.3902.3.315.1.12.1.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  Zxr10MplsHotStandbyLspEntry  

zxr10MplsHotTunnelIndex 1.3.6.1.4.1.3902.3.315.1.12.1.1.1
Uniquely identifies a set of tunnel instances between a pair of ingress and egress LSRs. Managers should obtain new values for row creation in this table by reading zxr10MplsTunnelIndexNext. When the MPLS signalling protocol is rsvp(2) this value SHOULD be equal to the value signaled in the Tunnel Id of the Session object. When the MPLS signalling protocol is crldp(3) this value SHOULD be equal to the value signaled in the LSP ID.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

zxr10MplsHotTunnelInstance 1.3.6.1.4.1.3902.3.315.1.12.1.1.2
Uniquely identifies a particular instance of a tunnel between a pair of ingress and egress LSRs. It is useful to identify multiple instances of tunnels for the purposes of backup and parallel tunnels. When the MPLS signaling protocol is rsvp(2) this value SHOULD be equal to the LSP Id of the Sender Template object. When the signaling protocol is crldp(3) there is no equivalent signaling object.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

zxr10MplsHotTunnelIngressLSRId 1.3.6.1.4.1.3902.3.315.1.12.1.1.3
Identity of the ingress LSR associated with this tunnel instance. When the MPLS signalling protocol is rsvp(2) this value SHOULD be equal to the Tunnel Sender Address in the Sender Template object and MAY be equal to the Extended Tunnel Id field in the SESSION object. When the MPLS signalling protocol is rldp(3) this value SHOULD be equal to the Ingress LSR Router ID field in the LSPID TLV object.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

zxr10MplsHotTunnelEgressLSRId 1.3.6.1.4.1.3902.3.315.1.12.1.1.4
Identity of the egress LSR associated with this tunnel instance.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

zxr10MplsHotTunnelOutLabel 1.3.6.1.4.1.3902.3.315.1.12.1.1.5
Out label of hotstandby tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

zxr10MplsHotTunnelOutIntf 1.3.6.1.4.1.3902.3.315.1.12.1.1.6
The name of out interface that hotstandby tunnel transits.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

zxr10MplsHotTunnelRole 1.3.6.1.4.1.3902.3.315.1.12.1.1.7
This value signifies the role that this tunnel entry/instance represents. This value MUST be set to head(1) at the originating point of the tunnel. This value MUST be set to transit(2) at transit points along the tunnel, if transit points are supported. This value MUST be set to tail(3) at the terminating point of the tunnel if tunnel tails are supported. The value headTail(4) is provided for tunnels that begin and end on the same LSR.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER head(1), transit(2), tail(3), headTail(4)  

zxr10MplsHotTunnelSessionAttributes 1.3.6.1.4.1.3902.3.315.1.12.1.1.8
This bit mask indicates optional session values for this tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

zxr10MplsHotTunnelResourcePointer 1.3.6.1.4.1.3902.3.315.1.12.1.1.9
This variable represents a pointer to the traffic parameter specification for this tunnel. This value may point at an entry in the zxr10MplsTunnelResourceEntry to indicate which zxr10MplsTunnelResourceEntry is to be assigned to this LSP instance. This value may optionally point at an externally defined traffic parameter specification table. A value of zeroDotZero indicates best-effort treatment. By having the same value of this object, two or more LSPs can indicate resource sharing.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

zxr10MplsHotTunnelInstancePriority 1.3.6.1.4.1.3902.3.315.1.12.1.1.10
This value indicates which priority, in descending order, with 0 indicating the lowest priority, within a group of tunnel instances. A group of tunnel instances is defined as a set of LSPs with the same zxr10MplsTunnelIndex in this table, but with a different zxr10MplsTunnelInstance. Tunnel instance priorities are used to denote the priority at which a particular tunnel instance will supercede another. Instances of tunnels containing the same zxr10MplsTunnelInstancePriority will be used for load sharing.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

zxr10MplsHotTunnelHopTableIndex 1.3.6.1.4.1.3902.3.315.1.12.1.1.11
Index into the zxr10MplsTunnelHopTable entry that specifies the explicit route hops for this tunnel. This object is meaningful only at the head-end of the tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

zxr10MplsHotTunnelPathInUse 1.3.6.1.4.1.3902.3.315.1.12.1.1.12
This value denotes the configured path that was chosen for this tunnel. This value reflects the secondary index into zxr10MplsTunnelHopTable. This path may not exactly match the one in zxr10MplsTunnelARHopTable due to the fact that some CSPF modification may have taken place. See zxr10MplsTunnelARHopTable for the actual path being taken by the tunnel. A value of zero denotes that no path is currently in use or available.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

zxr10MplsHotTunnelARHopTableIndex 1.3.6.1.4.1.3902.3.315.1.12.1.1.13
Index into the zxr10MplsTunnelARHopTable entry that specifies the actual hops traversed by the tunnel. This is automatically updated by the agent when the actual hops becomes available.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

zxr10MplsHotTunnelCHopTableIndex 1.3.6.1.4.1.3902.3.315.1.12.1.1.14
Index into the zxr10MplsTunnelCHopTable entry that specifies the computed hops traversed by the tunnel. This is automatically updated by the agent when computed hops become available or when computed hops get modified.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

zxr10MplsHotTunnelInstanceUpTime 1.3.6.1.4.1.3902.3.315.1.12.1.1.15
This value identifies the total time that this tunnel instance's operStatus has been Up(1).
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

zxr10MplsHotTunnelOperStatus 1.3.6.1.4.1.3902.3.315.1.12.1.1.16
Indicates the actual operational status of this tunnel, which is typically but not limited to, a function of the state of individual segments of this tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER up(1), down(2)  

zxr10MplsHotTunnelRowStatus 1.3.6.1.4.1.3902.3.315.1.12.1.1.17
This variable is used to create, modify, and/or delete a row in this table. When a row in this table is in active(1) state, no objects in that row can be modified by the agent except zxr10MplsTunnelAdminStatus, zxr10MplsTunnelRowStatus and zxr10MplsTunnelStorageType.
Status: current Access: read-only
OBJECT-TYPE    
  RowStatus  

zxr10MplsTunnelUp 1.3.6.1.4.1.3902.3.315.1.0.1
This notification is generated when a zxr10MplsTunnelOperStatus object for one of the configured tunnels is about to leave the down state and transition into up state.
Status: current Access: read-only
NOTIFICATION-TYPE    

zxr10MplsTunnelDown 1.3.6.1.4.1.3902.3.315.1.0.2
This notification is generated when a zxr10MplsTunnelOperStatus object for one of the configured tunnels is about to leave the up state and transition into down state.
Status: current Access: read-only
NOTIFICATION-TYPE    

zxr10MplsLspUp 1.3.6.1.4.1.3902.3.315.1.0.3
This notification is generated when a zxr10MplsTunnelOperStatus object for one of the LSPs is about to leave the down state and transition into up state.
Status: current Access: read-only
NOTIFICATION-TYPE    

zxr10MplsLspDown 1.3.6.1.4.1.3902.3.315.1.0.4
This notification is generated when a zxr10MplsTunnelOperStatus object for one of the LSPs is about to leave the up state and transition into down state.
Status: current Access: read-only
NOTIFICATION-TYPE    

zxr10MplsLspChange 1.3.6.1.4.1.3902.3.315.1.0.5
This notification is generated when a tunnel is MBB.
Status: current Access: read-only
NOTIFICATION-TYPE    

zxr10MplsTunnelUpcallNetmng 1.3.6.1.4.1.3902.3.315.1.0.6
This notification is generated when tunnel state changed, for example tunnel hotstandby bind or delete,tunnel creat successs, tunnel config success or fail...
Status: current Access: read-only
NOTIFICATION-TYPE    

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor